path: root/man/cryptsetup-reencrypt.8

.TH CRYPTSETUP-REENCRYPT "8" "January 2019" "cryptsetup-reencrypt" "Maintenance Commands"
.SH NAME
cryptsetup-reencrypt - tool for offline LUKS device re-encryption
.SH SYNOPSIS
.B cryptsetup-reencrypt <options> <device>
.SH DESCRIPTION
.PP
Cryptsetup-reencrypt can be used to change reencryption parameters
which otherwise require full on-disk data change (re-encryption).

You can regenerate \fBvolume key\fR (the real key used in on-disk encryption
unclocked by passphrase), \fBcipher\fR, \fBcipher mode\fR.

Cryptsetup-reencrypt reencrypts data on LUKS device in-place. During
reencryption process the LUKS device is marked unavailable.

\fIWARNING\fR: The cryptsetup-reencrypt program is not resistant to hardware
or kernel failures during reencryption (you can lose your data in this case).

\fIALWAYS BE SURE YOU HAVE RELIABLE BACKUP BEFORE USING THIS TOOL.\fR
.br
The reencryption can be temporarily suspended (by TERM signal or by
using ctrl+c) but you need to retain temporary files named LUKS-<uuid>.[log|org|new].
LUKS device is unavailable until reencryption is finished though.

Current working directory must be writable and temporary
files created during reencryption must be present.

For more info about LUKS see cryptsetup(8).
.PP
.SH OPTIONS
.TP
To start (or continue) re-encryption for <device> use:
.PP
\fIcryptsetup-reencrypt\fR <device>

\fB<options>\fR can be [\-\-batch-mode, \-\-block-size, \-\-cipher | \-\-keep-key,
\-\-debug, \-\-device-size, \-\-hash, \-\-header, \-\-iter-time | \-\-pbkdf\-force\-iterations,
\-\-key-file, \-\-key-size, \-\-key-slot, \-\-keyfile-offset, \-\-keyfile-size,
\-\-master\-key\-file, \-\-tries, \-\-pbkdf, \-\-pbkdf\-memory, \-\-pbkdf\-parallel,
\-\-progress-frequency, \-\-use-directio, \-\-use-random | \-\-use-urandom, \-\-use-fsync,
\-\-uuid, \-\-verbose, \-\-write-log]

To encrypt data on (not yet encrypted) device, use \fI\-\-new\fR with combination
with \fI\-\-reduce-device-size\fR or with \fI\-\-header\fR option for detached header.

To remove encryption from device, use \fI\-\-decrypt\fR.

For detailed description of encryption and key file options see \fIcryptsetup(8)\fR
man page.
.TP
.B "\-\-batch-mode, \-q"
Suppresses all warnings and reencryption progress output.
.TP
.B "\-\-block-size, \-B \fIvalue\fR"
Use re-encryption block size of <value> in MiB.

Values can be between 1 and 64 MiB.
.TP
.B "\-\-cipher, \-c" \fI<cipher-spec>\fR
Set the cipher specification string.
.TP
.B "\-\-debug"
Run in debug mode with full diagnostic logs. Debug output
lines are always prefixed by '#'.
.TP
.B "\-\-decrypt"
Remove encryption (decrypt already encrypted device and remove LUKS header).

\fBWARNING:\fR This is destructive operation and cannot be reverted.
.TP
.B "\-\-device-size \fIsize[units]\fR"
Instead of real device size, use specified value.

It means that only specified area (from the start of the device
to the specified size) will be reencrypted.

If no unit suffix is specified, the size is in bytes.

Unit suffix can be S for 512 byte sectors, K/M/G/T (or KiB,MiB,GiB,TiB)
for units with 1024 base or KB/MB/GB/TB for 1000 base (SI scale).

\fBWARNING:\fR This is destructive operation.
.TP
.B "\-\-hash, \-h \fI<hash-spec>\fR"
Specifies the hash used in the LUKS1 key setup scheme and volume key digest.

\fBNOTE:\fR if this parameter is not specified, default hash algorithm is always used
for new LUKS1 device header.

\fBNOTE:\fR with LUKS2 format this option is only relevant when new keyslot pbkdf algorithm
is set to PBKDF2 (see \fI\-\-pbkdf\fR).
.TP
.B "\-\-header\fR \fI<LUKS header file>\fR"
Use a detached (separated) metadata device or file where the
LUKS header is stored. This option allows one to store ciphertext
and LUKS header on different devices.

\fBWARNING:\fR There is no check whether the ciphertext device specified
actually belongs to the header given.
If used with \fI\-\-new\fR option, the header file will created (or overwritten).
Use with care.
.TP
.B "\-\-iter-time, \-i \fI<milliseconds>\fR"
The number of milliseconds to spend with PBKDF2 passphrase processing for the
new LUKS header.
.TP
.B "\-\-keep-key"
Do not change encryption key, just reencrypt the LUKS header and keyslots.

This option can be combined only with \fI\-\-hash\fR, \fI\-\-iter-time\fR,
\fI\-\-pbkdf\-force\-iterations\fR, \fI\-\-pbkdf\fR (LUKS2 only),
\fI\-\-pbkdf\-memory\fR (Argon2i/id and LUKS2 only) and \fI\-\-pbkdf\-parallel\fR
(Argon2i/id and LUKS2 only) options.
.TP
.B "\-\-key-file, \-d \fIname\fR"
Read the passphrase from file.

\fBWARNING:\fR \-\-key-file option can be used only if there is only one active keyslot,
or alternatively, also if \-\-key-slot option is specified (then all other keyslots
will be disabled in new LUKS device).

If this option is not used, cryptsetup-reencrypt will ask for all active keyslot
passphrases.
.TP
.B "\-\-key-size, \-s \fI<bits>\fR"
Set key size in bits. The argument has to be a multiple of  8.

The possible key-sizes are limited by the cipher and mode used.

If you are increasing key size, there must be enough space in the LUKS header
for enlarged keyslots (data offset must be large enough) or reencryption
cannot be performed.

If there is not enough space for keyslots with new key size,
you can destructively shrink device with \-\-reduce-device-size option.
.TP
.B "\-\-key-slot, \-S <0-MAX>"
Specify which key slot is used. For LUKS1, max keyslot number is 7. For LUKS2, it's 31.

\fBWARNING:\fR All other keyslots will be disabled if this option is used.
.TP
.B "\-\-keyfile-offset \fIvalue\fR"
Skip \fIvalue\fR bytes at the beginning of the key file.
.TP
.B "\-\-keyfile-size, \-l"
Read a maximum of \fIvalue\fR bytes from the key file.
Default is to read the whole file up to the compiled-in
maximum.
.TP
.B "\-\-master\-key\-file"
Use new volume (master) key stored in a file.
.TP
.B "\-\-new, \-N"
Create new header (encrypt not yet encrypted device).

This option must be used together with \-\-reduce-device-size.

\fBWARNING:\fR This is destructive operation and cannot be reverted.
.TP
.B "\-\-pbkdf"
Set Password-Based Key Derivation Function (PBKDF) algorithm for LUKS keyslot.
The PBKDF can be: \fIpbkdf2\fR, \fIargon2i\fR for Argon2i or \fIargon2id\fR for Argon2id.

For LUKS1, only \fIpbkdf2\fR is accepted (no need to use this option).
.TP
.B "\-\-pbkdf\-force\-iterations <num>"
Avoid PBKDF benchmark and set time cost (iterations) directly.
.TP
.B "\-\-pbkdf\-memory <number>"
Set the memory cost for PBKDF (for Argon2i/id the number represents kilobytes).
Note that it is maximal value, PBKDF benchmark or available physical memory
can decrease it.
This option is not available for PBKDF2.
.TP
.B "\-\-pbkdf\-parallel <number>"
Set the parallel cost for PBKDF (number of threads, up to 4).
Note that it is maximal value, it is decreased automatically if
CPU online count is lower.
This option is not available for PBKDF2.
.TP
.B "\-\-progress-frequency <seconds>"
Print separate line every <seconds> with reencryption progress.
.TP
.B "\-\-reduce-device-size \fIsize[units]\fR"
Enlarge data offset to specified value by shrinking device size.

This means that last sectors on the original device will be lost,
ciphertext data will be effectively shifted by specified
number of sectors.

It can be useful if you e.g. added some space to underlying
partition (so last sectors contains no data).

For units suffix see \-\-device-size parameter description.

You cannot shrink device more than by 64 MiB (131072 sectors).

\fBWARNING:\fR This is destructive operation and cannot be reverted.
Use with extreme care - shrunk filesystems are usually unrecoverable.
.TP
.B "\-\-tries, \-T"
Number of retries for invalid passphrase entry.
.TP
.B "\-\-type <type>"
Use only while encrypting not yet encrypted device (see \-\-new).

Specify LUKS version when performing in-place encryption. If the parameter
is omitted default value (LUKS1) is used. Type may be one of: \fBluks\fR (default),
\fBluks1\fR or \fBluks2\fR.
.TP
.B "\-\-use-directio"
Use direct-io (O_DIRECT) for all read/write data operations related
to block device undergoing reencryption.

Useful if direct-io operations perform better than normal buffered
operations (e.g. in virtual environments).
.TP
.B "\-\-use-fsync"
Use fsync call after every written block. This applies for reencryption
log files as well.
.TP
.B "\-\-use-random"
.TP
.B "\-\-use-urandom"
Define which kernel random number generator will be used to create the volume key.
.TP
.B "\-\-uuid" \fI<uuid>\fR
Use only while resuming an interrupted decryption process (see \-\-decrypt).

To find out what \fI<uuid>\fR to pass look for temporary files LUKS-<uuid>.[|log|org|new]
of the interrupted decryption process.
.TP
.B "\-\-verbose, \-v"
Print more information on command execution.
.TP
.B "\-\-version"
Show the program version.
.TP
.B "\-\-write-log"
Update log file after every block write. This can slow down reencryption
but will minimize data loss in the case of system crash.

.SH RETURN CODES
Cryptsetup-reencrypt returns 0 on success and a non-zero value on error.

Error codes are: 1 wrong parameters, 2 no permission,
3 out of memory, 4 wrong device specified, 5 device already exists
or device is busy.
.SH EXAMPLES
.TP
Reencrypt /dev/sdb1 (change volume key)
cryptsetup-reencrypt /dev/sdb1
.TP
Reencrypt and also change cipher and cipher mode
cryptsetup-reencrypt /dev/sdb1 \-c aes-xts-plain64
.TP
Add LUKS encryption to not yet encrypted device

First, be sure you have space added to disk.

Or alternatively shrink filesystem in advance.
.br
Here we need 4096 512-bytes sectors (enough for 2x128 bit key).

fdisk \-u /dev/sdb # move sdb1 partition end + 4096 sectors
(or use resize2fs or tool for your filesystem and shrink it)

cryptsetup-reencrypt /dev/sdb1 \-\-new \-\-reduce-device-size 4096S
.TP
Remove LUKS encryption completely

cryptsetup-reencrypt /dev/sdb1 \-\-decrypt

.SH REPORTING BUGS
Report bugs, including ones in the documentation, on
the cryptsetup mailing list at <dm-crypt@saout.de>
or in the 'Issues' section on LUKS website.
Please attach the output of the failed command with the
\-\-debug option added.
.SH AUTHORS
Cryptsetup-reencrypt was written by Milan Broz <gmazyland@gmail.com>.
.SH COPYRIGHT
Copyright \(co 2012-2019 Milan Broz
.br
Copyright \(co 2012-2019 Red Hat, Inc.

This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
.SH SEE ALSO
The project website at \fBhttps://gitlab.com/cryptsetup/cryptsetup\fR