path: root/tests/compat-test2

#!/bin/bash

PS4='$LINENO:'
CRYPTSETUP=../cryptsetup

CRYPTSETUP_VALGRIND=../.libs/cryptsetup
CRYPTSETUP_LIB_VALGRIND=../.libs

DEV_NAME=dummy
DEV_NAME2=dummy2
DEV_NAME3=dummy3
ORIG_IMG=luks-test-orig
IMG=luks-test
IMG10=luks-test-v10
HEADER_IMG=luks-header
HEADER_KEYU=luks2_keyslot_unassigned.img
HEADER_LUKS2_PV=blkid-luks2-pv.img
KEY1=key1
KEY2=key2
KEY5=key5
KEYE=keye
PWD0="compatkey"
PWD1="93R4P4pIqAH8"
PWD2="mymJeD8ivEhE"
PWD3="ocMakf3fAcQO"
PWD4="Qx3qn46vq0v"
PWDW="rUkL4RUryBom"
TEST_KEYRING_NAME="compattest2_keyring"
TEST_TOKEN0="compattest2_desc0"
TEST_TOKEN1="compattest2_desc1"
VK_FILE="compattest2_vkfile"
IMPORT_TOKEN="{\"type\":\"some_type\",\"keyslots\":[],\"base64_data\":\"zxI7vKB1Qwl4VPB4D-N-OgcC14hPCG0IDu8O7eCqaQ\"}"
TOKEN_FILE0=test-token-file0
TOKEN_FILE1=test-token-file1

FAST_PBKDF_OPT="--pbkdf pbkdf2 --pbkdf-force-iterations 1000"

TEST_UUID="12345678-1234-1234-1234-123456789abc"

LOOPDEV=$(losetup -f 2>/dev/null)
[ -f /etc/system-fips ] && FIPS_MODE=$(cat /proc/sys/crypto/fips_enabled 2>/dev/null)

LOCK_DIR=$(grep DEFAULT_LUKS2_LOCK_PATH ../config.h | cut -d\" -f 2)
HAVE_KEYRING=$(grep -e "#define KERNEL_KEYRING" ../config.h)
test -n "$HAVE_KEYRING" || HAVE_KEYRING=0
HAVE_KEYRING=${HAVE_KEYRING: -1}

function remove_mapping()
{
	[ -b /dev/mapper/$DEV_NAME3 ] && dmsetup remove $DEV_NAME3
	[ -b /dev/mapper/$DEV_NAME2 ] && dmsetup remove $DEV_NAME2
	[ -b /dev/mapper/$DEV_NAME ] && dmsetup remove $DEV_NAME
	losetup -d $LOOPDEV >/dev/null 2>&1
	rm -f $ORIG_IMG $IMG $IMG10 $KEY1 $KEY2 $KEY5 $KEYE $HEADER_IMG $HEADER_KEYU $VK_FILE $HEADER_LUKS2_PV missing-file $TOKEN_FILE0 $TOKEN_FILE1 test_image_* >/dev/null 2>&1

	# unlink whole test keyring
	[ -n "$TEST_KEYRING" ] && keyctl unlink $TEST_KEYRING "@u" >/dev/null
	unset TEST_KEYRING
}

function force_uevent()
{
	DNAME=$(echo $LOOPDEV | cut -f3 -d /)
	echo "change" >/sys/block/$DNAME/uevent
}

function fail()
{
	[ -n "$1" ] && echo "$1"
	remove_mapping
	echo "FAILED at line $(caller)"
	exit 2
}

function fips_mode()
{
	[ -n "$FIPS_MODE" ] && [ "$FIPS_MODE" -gt 0 ]
}

function can_fail_fips()
{
        # Ignore this fail if running in FIPS mode
	fips_mode || fail $1
}

function skip()
{
	[ -n "$1" ] && echo "$1"
	remove_mapping
	exit 77
}

function prepare()
{
	[ -b /dev/mapper/$DEV_NAME ] && dmsetup remove $DEV_NAME

	case "$2" in
	wipe)
		remove_mapping
		dd if=/dev/zero of=$IMG bs=1M count=40 >/dev/null 2>&1
		sync
		losetup $LOOPDEV $IMG
		;;
	new)
		remove_mapping
		xz -cd compatimage.img.xz > $IMG
		xz -dk $HEADER_KEYU.xz
		# FIXME: switch to internal loop (no losetup at all)
		echo "bad" | $CRYPTSETUP luksOpen --key-slot 0 --test-passphrase $IMG 2>&1 | \
			grep "autoclear flag" && skip "WARNING: Too old kernel, test skipped."
		losetup $LOOPDEV $IMG
		xz -cd compatv10image.img.xz > $IMG10
		;;
	reuse | *)
		if [ ! -e $IMG ]; then
			xz -cd compatimage.img.xz > $IMG
			losetup $LOOPDEV $IMG
		fi
		[ ! -e $IMG10 ] && xz -cd compatv10image.img.xz > $IMG10
		;;
	esac

	if [ ! -e $KEY1 ]; then
		#dd if=/dev/urandom of=$KEY1 count=1 bs=32 >/dev/null 2>&1
		echo -n $'\x48\xc6\x74\x4f\x41\x4e\x50\xc0\x79\xc2\x2d\x5b\x5f\x68\x84\x17' >$KEY1
		echo -n $'\x9c\x03\x5e\x1b\x4d\x0f\x9a\x75\xb3\x90\x70\x32\x0a\xf8\xae\xc4'>>$KEY1
	fi

	if [ ! -e $KEY2 ]; then
		dd if=/dev/urandom of=$KEY2 count=1 bs=16 >/dev/null 2>&1
	fi

	if [ ! -e $KEY5 ]; then
		dd if=/dev/urandom of=$KEY5 count=1 bs=16 >/dev/null 2>&1
	fi

	if [ ! -e $KEYE ]; then
		touch $KEYE
	fi

	cp $IMG $ORIG_IMG
	[ -n "$1" ] && echo "CASE: $1"
}

function check_exists()
{
	[ -b /dev/mapper/$DEV_NAME ] || fail
}

function valgrind_setup()
{
	which valgrind >/dev/null 2>&1 || fail "Cannot find valgrind."
	[ ! -f $CRYPTSETUP_VALGRIND ] && fail "Unable to get location of cryptsetup executable."
	export LD_LIBRARY_PATH="$CRYPTSETUP_LIB_VALGRIND:$LD_LIBRARY_PATH"
}

function valgrind_run()
{
	INFOSTRING="$(basename ${BASH_SOURCE[1]})-line-${BASH_LINENO[0]}" ./valg.sh ${CRYPTSETUP_VALGRIND} "$@"
}

function dm_crypt_keyring_support()
{
	VER_STR=$(dmsetup targets | grep crypt | cut -f2 -dv)
	[ -z "$VER_STR" ] && fail "Failed to parse dm-crypt version."

	VER_MAJ=$(echo $VER_STR | cut -f 1 -d.)
	VER_MIN=$(echo $VER_STR | cut -f 2 -d.)
	VER_PTC=$(echo $VER_STR | cut -f 3 -d.)

	[ $VER_MAJ -gt 1 ] && return 0
	[ $VER_MAJ -eq 1 -a $VER_MIN -gt 18 ] && return 0
	[ $VER_MAJ -eq 1 -a $VER_MIN -eq 18 -a $VER_PTC -ge 1 ] && return 0
	return 1
}

function dm_crypt_keyring_flawed()
{
	dm_crypt_keyring_support && return 1;

	[ $VER_MAJ -gt 1 ] && return 0
	[ $VER_MAJ -eq 1 -a $VER_MIN -ge 15 ] && return 0
	return 1
}

function dm_crypt_keyring_new_kernel()
{
	KER_STR=$(uname -r)
	[ -z "$KER_STR" ] && fail "Failed to parse kernel version."
	KER_MAJ=$(echo $KER_STR | cut -f 1 -d.)
	KER_MIN=$(echo $KER_STR | cut -f 2 -d.)

	[ $KER_MAJ -ge 5 ] && return 0
	[ $KER_MAJ -eq 4 -a $KER_MIN -ge 15 ] && return 0
	return 1
}

function test_and_prepare_keyring() {
	which keyctl > /dev/null 2>&1 || skip "Cannot find keyctl, test skipped"
	keyctl list "@s" > /dev/null || skip "Current session keyring is unreachable, test skipped"
	TEST_KEYRING=$(keyctl newring $TEST_KEYRING_NAME "@u" 2> /dev/null)
	test -n "$TEST_KEYRING" || skip "Failed to create keyring in user keyring"
	keyctl search "@s" keyring "$TEST_KEYRING" > /dev/null 2>&1 || keyctl link "@u" "@s" > /dev/null 2>&1
	load_key user test_key test_data "$TEST_KEYRING" || skip "Kernel keyring service is useless on this system, test skipped."
}

# $1 type
# $2 description
# $3 payload
# $4 keyring
function load_key()
{
	keyctl add $@ >/dev/null
}

export LANG=C

[ -n "$VALG" ] && valgrind_setup && CRYPTSETUP=valgrind_run

[ $(id -u) != 0 ] && skip "WARNING: You must be root to run this test, test skipped."
[ -z "$LOOPDEV" ] && skip "WARNING: Cannot find free loop device, test skipped."
[ -d "$LOCK_DIR" ] || skip "WARNING: LUKS2 locking directory ($LOCK_DIR) is missing, test skipped."

prepare "[1] Data offset" wipe
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --offset 1 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --offset 16385 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --offset 32 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --align-payload 16384 --offset 16384 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --offset 16384 || fail
$CRYPTSETUP -q luksDump  $LOOPDEV | grep -q "offset: $((512 * 16384)) \[bytes\]" || fail
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 1024 --offset 16384 >/dev/null || fail
$CRYPTSETUP -q luksDump  $LOOPDEV | grep -q "offset: $((512 * 16384)) \[bytes\]" || fail
truncate -s 4096 $HEADER_IMG
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG -q --offset 80000 >/dev/null 2>&1 || fail

prepare "[2] Sector size and old payload alignment" wipe
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size  511 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size  256 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 8192 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size  512 || fail
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --align-payload 5 || fail
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size  512 --align-payload 5 || fail
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 2048 --align-payload 32 >/dev/null || fail
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 4096 >/dev/null || fail
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 2048 --align-payload 32768 >/dev/null || fail
$CRYPTSETUP -q luksDump  $LOOPDEV | grep -q "offset: $((512 * 32768)) \[bytes\]" || fail
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 2048 >/dev/null || fail
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 4096 --align-payload 32768 >/dev/null || fail
$CRYPTSETUP -q luksDump  $LOOPDEV | grep -q "offset: $((512 * 32768)) \[bytes\]" || fail

prepare "[3] format" wipe
echo $PWD1 | $CRYPTSETUP -q $FAST_PBKDF_OPT -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks2 $LOOPDEV || fail
prepare "[4] format using hash sha512" wipe
echo $PWD1 | $CRYPTSETUP $FAST_PBKDF_OPT -h sha512 -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks2 $LOOPDEV || fail
$CRYPTSETUP -q luksDump  $LOOPDEV | grep "0: pbkdf2" -A2 | grep "Hash:" | grep -qe sha512 || fail

prepare "[5] open"
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --test-passphrase || fail
echo $PWDW | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --test-passphrase 2>/dev/null && fail
[ $? -ne 2 ] && fail "luksOpen should return EPERM exit code"
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
check_exists

# Key Slot 1 and key material section 1 must change, the rest must not.
prepare "[6] add key"
echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT || fail
echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail

# Unsuccessful Key Delete - nothing may change
prepare "[7] unsuccessful delete"
echo $PWDW | $CRYPTSETUP luksKillSlot $LOOPDEV 1 2>/dev/null && fail
[ $? -ne 2 ] && fail "luksKillSlot should return EPERM exit code"
#FIXME
#$CRYPTSETUP -q luksKillSlot $LOOPDEV 8 2>/dev/null && fail
#$CRYPTSETUP -q luksKillSlot $LOOPDEV 7 2>/dev/null && fail

# Delete Key Test
# Key Slot 1 and key material section 1 must change, the rest must not
prepare "[8] successful delete"
$CRYPTSETUP -q luksKillSlot $LOOPDEV 1 || fail
echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2> /dev/null && fail
[ $? -ne 2 ] && fail "luksOpen should return EPERM exit code"
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail

# Key Slot 1 and key material section 1 must change, the rest must not
prepare "[9] add key test for key files"
echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV $KEY1 || fail
$CRYPTSETUP -d $KEY1 luksOpen $LOOPDEV $DEV_NAME || fail

# Key Slot 1 and key material section 1 must change, the rest must not
prepare "[10] delete key test with key1 as remaining key"
$CRYPTSETUP -d $KEY1 luksKillSlot $LOOPDEV 0 || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail

# Delete last slot
prepare "[11] delete last key" wipe
echo $PWD1 | $CRYPTSETUP luksFormat --type luks2 $LOOPDEV $FAST_PBKDF_OPT || fail
echo $PWD1 | $CRYPTSETUP luksKillSlot $LOOPDEV 0 || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail

# Format test for ESSIV, and some other parameters.
prepare "[12] parameter variation test" wipe
$CRYPTSETUP -q $FAST_PBKDF_OPT -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks2 $LOOPDEV $KEY1 || fail
$CRYPTSETUP -d $KEY1 luksOpen $LOOPDEV $DEV_NAME || fail

prepare	"[13] open/close - stacked devices" wipe
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 $LOOPDEV $FAST_PBKDF_OPT || fail
echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 /dev/mapper/$DEV_NAME $FAST_PBKDF_OPT || fail
echo $PWD1 | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail
$CRYPTSETUP -q luksClose  $DEV_NAME2 || fail
$CRYPTSETUP -q luksClose  $DEV_NAME || fail

prepare	"[14] format/open - passphrase on stdin & new line" wipe
# stdin defined by "-" must take even newline
#echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksFormat $LOOPDEV - || fail
echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q --key-file=- luksFormat --type luks2 $LOOPDEV || fail
echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP -q luksClose  $DEV_NAME || fail
echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
# now also try --key-file
echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q luksFormat --type luks2 $LOOPDEV --key-file=- || fail
echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP -q luksClose  $DEV_NAME || fail
# process newline if from stdin
echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q luksFormat --type luks2 $LOOPDEV || fail
echo "$PWD1" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP -q luksClose  $DEV_NAME || fail

prepare "[15] UUID - use and report provided UUID" wipe
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --uuid blah --type luks2 $LOOPDEV 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --uuid $TEST_UUID --type luks2 $LOOPDEV || fail
tst=$($CRYPTSETUP -q luksUUID $LOOPDEV)
[ "$tst"x = "$TEST_UUID"x ] || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail
$CRYPTSETUP -q luksUUID --uuid $TEST_UUID $LOOPDEV || fail
tst=$($CRYPTSETUP -q luksUUID $LOOPDEV)
[ "$tst"x = "$TEST_UUID"x ] || fail

prepare "[16] luksFormat" wipe
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --master-key-file /dev/urandom --type luks2 $LOOPDEV || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --master-key-file /dev/urandom --type luks2 $LOOPDEV -d $KEY1 || fail
$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --master-key-file /dev/urandom -s 256 --uuid $TEST_UUID --type luks2 $LOOPDEV $KEY1 || fail
$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP -q luksClose  $DEV_NAME || fail
# open by UUID
force_uevent # some systems do not update loop by-uuid
$CRYPTSETUP luksOpen -d $KEY1 UUID=X$TEST_UUID $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP luksOpen -d $KEY1 UUID=$TEST_UUID $DEV_NAME || fail
$CRYPTSETUP -q luksClose  $DEV_NAME || fail
# empty keyfile
$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEYE || fail
$CRYPTSETUP luksOpen -d $KEYE $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP -q luksClose  $DEV_NAME || fail
# open by volume key
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT -s 256 --master-key-file $KEY1 --type luks2 $LOOPDEV || fail
$CRYPTSETUP luksOpen --master-key-file /dev/urandom $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP luksOpen --master-key-file $KEY1 $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP -q luksClose  $DEV_NAME || fail

prepare "[17] AddKey volume key, passphrase and keyfile" wipe
# masterkey
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --master-key-file /dev/zero --key-slot 3 || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2" || fail
echo $PWD2 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV --master-key-file /dev/zero --key-slot 4 || fail
echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 4 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "4: luks2" || fail
echo $PWD3 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV --master-key-file /dev/null --key-slot 5 2>/dev/null && fail
$CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV --master-key-file /dev/zero --key-slot 5 $KEY1 || fail
$CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 5 -d $KEY1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || fail

# special "-" handling
$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY1 --key-slot 3 || fail
echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 - || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d - --test-passphrase || fail
echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d - $KEY2 || fail
$CRYPTSETUP luksOpen $LOOPDEV -d $KEY2 --test-passphrase || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d - -d $KEY1 --test-passphrase 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d $KEY1 -d $KEY1 --test-passphrase 2>/dev/null && fail

# [0]PWD1 [1]PWD2 [2]$KEY1/1 [3]$KEY1 [4]$KEY2
$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY1 --key-slot 3 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2" || fail
$CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 3 2>/dev/null && fail
# keyfile/keyfile
$CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 4 || fail
$CRYPTSETUP luksOpen $LOOPDEV -d $KEY2 --test-passphrase --key-slot 4 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "4: luks2" || fail
# passphrase/keyfile
echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 --key-slot 0 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "0: luks2" || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 0 || fail
# passphrase/passphrase
echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV --key-slot 1 || fail
echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail
# keyfile/passphrase
echo -e "$PWD2\n" | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 2 --new-keyfile-size 3 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2" || fail

prepare "[18] RemoveKey passphrase and keyfile" reuse
$CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2" || fail
$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2" && fail
$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY1 2>/dev/null && fail
[ $? -ne 2 ] && fail "luksRemoveKey should return EPERM exit code"
$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 --keyfile-size 1 2>/dev/null && fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "4: luks2" || fail
$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "4: luks2" && fail
# if password or keyfile is provided, batch mode must not suppress it
echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 2>/dev/null && fail
echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 -q 2>/dev/null && fail
echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 --key-file=- 2>/dev/null && fail
echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 --key-file=- -q 2>/dev/null && fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2" || fail
# kill slot using passphrase from 1
echo $PWD2 | $CRYPTSETUP luksKillSlot $LOOPDEV 2 2>/dev/null || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2" && fail
# remove key0 / slot 0
echo $PWD1 | $CRYPTSETUP luksRemoveKey $LOOPDEV || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "0: luks2" && fail
# last keyslot, in batch mode no passphrase needed...
$CRYPTSETUP luksKillSlot -q $LOOPDEV 1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" && fail

prepare "[19] create & status & resize" wipe
echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash xxx 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha1 --cipher aes-cbc-essiv:sha256 --offset 3 --skip 4 --readonly || fail
$CRYPTSETUP -q status  $DEV_NAME | grep "offset:" | grep -q "3 sectors" || fail
$CRYPTSETUP -q status  $DEV_NAME | grep "skipped:" | grep -q "4 sectors" || fail
$CRYPTSETUP -q status  $DEV_NAME | grep "mode:" | grep -q "readonly" || fail
$CRYPTSETUP -q resize  $DEV_NAME --size 100 || fail
$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail
$CRYPTSETUP -q resize  $DEV_NAME || fail
$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "81917 sectors" || fail
# Resize underlying loop device as well
truncate -s 20M $IMG || fail
$CRYPTSETUP -q resize  $DEV_NAME || fail
$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "40957 sectors" || fail
$CRYPTSETUP -q remove  $DEV_NAME || fail
$CRYPTSETUP -q status  $DEV_NAME >/dev/null && fail
echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha1 $LOOPDEV || fail
$CRYPTSETUP -q remove  $DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP -q create $DEV_NAME --hash sha1 $LOOPDEV || fail
$CRYPTSETUP -q remove  $DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP -q create $DEV_NAME --hash sha1 --size 100 $LOOPDEV || fail
$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail
$CRYPTSETUP -q remove  $DEV_NAME || fail
# verify is ignored on non-tty input
echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha1 --verify-passphrase 2>/dev/null || fail
$CRYPTSETUP -q remove  $DEV_NAME || fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 --key-size 255 2>/dev/null && fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 --key-size -1 2>/dev/null && fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 -l -1 2>/dev/null && fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1  || fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 2>/dev/null && fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d blah 2>/dev/null && fail
$CRYPTSETUP -q remove  $DEV_NAME || fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d /dev/urandom || fail
$CRYPTSETUP -q remove  $DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
if dm_crypt_keyring_support; then
	echo | $CRYPTSETUP -q resize --size 100 $DEV_NAME 2>/dev/null && fail
fi
echo $PWD1 | $CRYPTSETUP -q resize --size 100 $DEV_NAME || fail
$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail
$CRYPTSETUP close $DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP luksOpen --disable-keyring $LOOPDEV $DEV_NAME || fail
echo | $CRYPTSETUP -q resize --size 100 $DEV_NAME || fail
$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail
$CRYPTSETUP close $DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
if dm_crypt_keyring_support; then
	$CRYPTSETUP -q resize --disable-keyring --size 100 $DEV_NAME 2>/dev/null && fail
fi

prepare "[20] Disallow open/create if already mapped." wipe
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 || fail
$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 2>/dev/null && fail
$CRYPTSETUP create $DEV_NAME2 $LOOPDEV -d $KEY1 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV 2>/dev/null && fail
$CRYPTSETUP remove  $DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME2 2>/dev/null && fail
$CRYPTSETUP  luksClose  $DEV_NAME || fail

prepare "[21] luksDump" wipe
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --uuid $TEST_UUID --type luks2 $LOOPDEV $KEY1 || fail
echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "0: luks2" || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q $TEST_UUID || fail
echo $PWDW | $CRYPTSETUP luksDump $LOOPDEV --dump-master-key 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP luksDump $LOOPDEV --dump-master-key | grep -q "MK dump:" || can_fail_fips
$CRYPTSETUP luksDump -q $LOOPDEV --dump-master-key -d $KEY1 | grep -q "MK dump:" || can_fail_fips
echo $PWD1 | $CRYPTSETUP luksDump -q $LOOPDEV --dump-master-key --master-key-file $VK_FILE >/dev/null || can_fail_fips
echo $PWD1 | $CRYPTSETUP luksDump -q $LOOPDEV --dump-master-key --master-key-file $VK_FILE 2>/dev/null && fail
fips_mode || {
	echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --master-key-file $VK_FILE $LOOPDEV || fail
}

prepare "[22] remove disappeared device" wipe
dmsetup create $DEV_NAME --table "0 39998 linear $LOOPDEV 2" || fail
echo $PWD1 | $CRYPTSETUP -q $FAST_PBKDF_OPT luksFormat --type luks2 /dev/mapper/$DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail
# underlying device now returns error but node is still present
dmsetup load $DEV_NAME --table "0 40000 error" || fail
dmsetup resume $DEV_NAME || fail
$CRYPTSETUP -q luksClose $DEV_NAME2 || fail
dmsetup remove $DEV_NAME || fail

prepare "[23] ChangeKey passphrase and keyfile" wipe
# [0]$KEY1 [1]key0
$CRYPTSETUP -q luksFormat --type luks2 $LOOPDEV $KEY1 $FAST_PBKDF_OPT --key-slot 0 || fail
echo $PWD1 | $CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 --key-slot 1 || fail
# keyfile [0] / keyfile [0]
$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 0 || fail
# passphrase [1] / passphrase [1]
echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT --key-slot 1 || fail
# keyfile [0] / keyfile [new]
$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 $KEY1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "0: luks2" && fail
# passphrase [1] / passphrase [new]
echo -e "$PWD2\n$PWD1\n" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT $LOOPDEV || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" && fail
# use all slots
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
# still allows replace
#FIXME
#$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 || fail
#$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 2>/dev/null && fail

prepare "[24] Keyfile limit" wipe
$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY1 --key-slot 0 -l 13 || fail
$CRYPTSETUP --key-file=$KEY1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l 0 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l -1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l 14 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset -1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l 13 luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP luksClose  $DEV_NAME || fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 2>/dev/null && fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -l 14 2>/dev/null && fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -l -1 2>/dev/null && fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 13 --new-keyfile-size 12 || fail
$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 2>/dev/null && fail
$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 -l 12 || fail
$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 2>/dev/null && fail
[ $? -ne 2 ] && fail "luksChangeKey should return EPERM exit code"
$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 -l 14 2>/dev/null && fail
$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 13 || fail
# -l is ignored for stdin if _only_ passphrase is used
echo $PWD1 | $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY2 $FAST_PBKDF_OPT || fail
# this is stupid, but expected
echo $PWD1 | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 11 2>/dev/null && fail
echo $PWDW"0" | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 12 2>/dev/null && fail
echo -e "$PWD1\n" | $CRYPTSETUP luksRemoveKey $LOOPDEV -d- -l 12 || fail
# offset
$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY1 --key-slot 0 -l 13 --keyfile-offset 16 || fail
$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 15 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 16 luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP luksClose  $DEV_NAME || fail
$CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 -l 13 --keyfile-offset 16 $KEY2 --new-keyfile-offset 1 || fail
$CRYPTSETUP --key-file=$KEY2 --keyfile-offset 11 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP --key-file=$KEY2 --keyfile-offset 1 luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP luksClose  $DEV_NAME || fail
$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 --keyfile-offset 1 $KEY2 --new-keyfile-offset 0 || fail
$CRYPTSETUP luksOpen -d $KEY2 $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP luksClose $DEV_NAME || fail

prepare "[25] Create shared segments" wipe
echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV  --hash sha1 --offset   0 --size 256 || fail
echo $PWD1 | $CRYPTSETUP create $DEV_NAME2 $LOOPDEV --hash sha1 --offset 512 --size 256 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP create $DEV_NAME2 $LOOPDEV --hash sha1 --offset 512 --size 256 --shared || fail
$CRYPTSETUP -q remove  $DEV_NAME2 || fail
$CRYPTSETUP -q remove  $DEV_NAME || fail

prepare "[26] Suspend/Resume" wipe
# only LUKS is supported
echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha1 $LOOPDEV || fail
$CRYPTSETUP luksSuspend $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP -q remove  $DEV_NAME || fail
$CRYPTSETUP luksSuspend $DEV_NAME 2>/dev/null && fail
# LUKS
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail
echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP luksSuspend $DEV_NAME || fail
$CRYPTSETUP -q resize  $DEV_NAME 2>/dev/null && fail
echo $PWDW | $CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail
[ $? -ne 2 ] && fail "luksResume should return EPERM exit code"
echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME  || fail
$CRYPTSETUP -q luksClose $DEV_NAME || fail

prepare "[27] luksOpen with specified key slot number" wipe
# first, let's try passphrase option
echo $PWD3 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT -S 5 --type luks2 $LOOPDEV || fail
echo $PWD3 | $CRYPTSETUP luksOpen -S 4 $LOOPDEV $DEV_NAME && fail
[ -b /dev/mapper/$DEV_NAME ] && fail
echo $PWD3 | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME || fail
check_exists
$CRYPTSETUP luksClose $DEV_NAME || fail
echo -e "$PWD3\n$PWD1" | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 0 $LOOPDEV || fail
echo $PWD3 | $CRYPTSETUP luksOpen -S 0 $LOOPDEV $DEV_NAME 2>/dev/null && fail
[ -b /dev/mapper/$DEV_NAME ] && fail
echo $PWD1 | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME 2>/dev/null && fail
[ -b /dev/mapper/$DEV_NAME ] && fail
# second, try it with keyfiles
$CRYPTSETUP -q luksFormat -q -S 5 $FAST_PBKDF_OPT -d $KEY5 --type luks2 $LOOPDEV || fail
$CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail
$CRYPTSETUP luksOpen -S 5 -d $KEY5 $LOOPDEV $DEV_NAME || fail
check_exists
$CRYPTSETUP luksClose $DEV_NAME || fail
$CRYPTSETUP luksOpen -S 1 -d $KEY5 $LOOPDEV $DEV_NAME 2>/dev/null && fail
[ -b /dev/mapper/$DEV_NAME ] && fail
$CRYPTSETUP luksOpen -S 5 -d $KEY1 $LOOPDEV $DEV_NAME 2>/dev/null && fail
[ -b /dev/mapper/$DEV_NAME ] && fail
# test keyslot not assigned to segment is unable to unlock volume
# otoh it should be allowed to test for proper passphrase
prepare "" new
echo $PWD1 | $CRYPTSETUP open -S1 --test-passphrase $HEADER_KEYU || fail
echo $PWD1 | $CRYPTSETUP open --test-passphrase $HEADER_KEYU || fail
echo $PWD1 | $CRYPTSETUP open -S1 $HEADER_KEYU $DEV_NAME && fail
[ -b /dev/mapper/$DEV_NAME ] && fail
echo $PWD1 | $CRYPTSETUP open $HEADER_KEYU $DEV_NAME && fail
[ -b /dev/mapper/$DEV_NAME ] && fail
echo $PWD0 | $CRYPTSETUP open -S1 --test-passphrase $HEADER_KEYU $DEV_NAME 2>/dev/null && fail
$CRYPTSETUP luksKillSlot -q $HEADER_KEYU 0
$CRYPTSETUP luksDump $HEADER_KEYU | grep -q "0: luks2" && fail
echo $PWD1 | $CRYPTSETUP open -S1 --test-passphrase $HEADER_KEYU || fail
echo $PWD1 | $CRYPTSETUP open --test-passphrase $HEADER_KEYU || fail
echo $PWD1 | $CRYPTSETUP open -S1 $HEADER_KEYU $DEV_NAME && fail

prepare "[28] Detached LUKS header" wipe
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG || fail
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG --align-payload 1 >/dev/null 2>&1 && fail
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG --align-payload 8192 || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG --align-payload 4096 >/dev/null || fail
$CRYPTSETUP luksDump $HEADER_IMG | grep -e "0: crypt" -A1 | grep -qe $((4096*512)) || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG --align-payload 0 || fail
echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP -q resize  $DEV_NAME --size 100 --header $HEADER_IMG || fail
$CRYPTSETUP -q status  $DEV_NAME --header $HEADER_IMG | grep "size:" | grep -q "100 sectors" || fail
$CRYPTSETUP -q status  $DEV_NAME | grep "type:" | grep -q "n/a" || fail
$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail
$CRYPTSETUP luksSuspend $DEV_NAME --header $HEADER_IMG || fail
echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail
$CRYPTSETUP luksSuspend $DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME && fail
echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail
$CRYPTSETUP luksClose $DEV_NAME || fail
echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 5 _fakedev_ --header $HEADER_IMG $KEY5 || fail
$CRYPTSETUP luksDump _fakedev_ --header $HEADER_IMG | grep -q "5: luks2" || fail
$CRYPTSETUP luksKillSlot -q _fakedev_ --header $HEADER_IMG 5 || fail
$CRYPTSETUP luksDump _fakedev_ --header $HEADER_IMG | grep -q "5: luks2" && fail

prepare "[29] Repair metadata" wipe
xz -dk $HEADER_LUKS2_PV.xz
$CRYPTSETUP isLuks --disable-locks $HEADER_LUKS2_PV && fail
$CRYPTSETUP isLuks $HEADER_LUKS2_PV && fail
$CRYPTSETUP isLuks --disable-locks --type luks2 $HEADER_LUKS2_PV && fail
$CRYPTSETUP isLuks --type luks2 $HEADER_LUKS2_PV && fail
$CRYPTSETUP -q repair $HEADER_LUKS2_PV || fail
$CRYPTSETUP isLuks $HEADER_LUKS2_PV || fail
$CRYPTSETUP isLuks --type luks2 $HEADER_LUKS2_PV || fail
$CRYPTSETUP isLuks --type luks1 $HEADER_LUKS2_PV && fail

prepare "[30] LUKS erase" wipe
$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY5 --key-slot 5 || fail
$CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || fail
$CRYPTSETUP luksErase -q $LOOPDEV || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" && fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" && fail

prepare "[31] LUKS convert" wipe
$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks1 $LOOPDEV $KEY5 --key-slot 5 || fail
$CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail
$CRYPTSETUP -q convert --type luks1 $LOOPDEV >/dev/null 2>&1 && fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: ENABLED" || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: ENABLED" || fail
$CRYPTSETUP -q convert --type luks2 $LOOPDEV || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || fail
$CRYPTSETUP -q convert --type luks1 $LOOPDEV || fail
# hash test
$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY5 -S 0 --hash sha1 || fail
$CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 --hash sha256 || fail
$CRYPTSETUP -q convert --type luks1 $LOOPDEV >/dev/null 2>&1 && fail
$CRYPTSETUP -q luksKillSlot $LOOPDEV 1 || fail
$CRYPTSETUP -q convert --type luks1 $LOOPDEV || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: ENABLED" || fail
$CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 0 -d $KEY5 || fail

if dm_crypt_keyring_flawed; then
	prepare "[32a] LUKS2 keyring dm-crypt bug" wipe
	echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG || fail
	echo $PWD1 | $CRYPTSETUP open $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail
	$CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "dm-crypt" || fail
	$CRYPTSETUP close $DEV_NAME || fail
	# key must not load in kernel key even when dm-crypt module is missing
	if rmmod dm-crypt > /dev/null 2>&1; then
		echo $PWD1 | $CRYPTSETUP open $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail
		$CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "dm-crypt" || fail
		$CRYPTSETUP close $DEV_NAME || fail
	fi
fi

if dm_crypt_keyring_support && dm_crypt_keyring_new_kernel; then
	prepare "[32] LUKS2 key in keyring" wipe
	echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG || fail

	# check keyring support detection works as expected
	rmmod dm-crypt > /dev/null 2>&1 || true
	echo $PWD1 | $CRYPTSETUP open $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail
	$CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "keyring" || fail
	$CRYPTSETUP close $DEV_NAME || fail

	echo $PWD1 | $CRYPTSETUP open  $LOOPDEV --disable-keyring --header $HEADER_IMG $DEV_NAME || fail
	$CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "dm-crypt" || fail
	$CRYPTSETUP close $DEV_NAME || fail

	echo $PWD1 | $CRYPTSETUP open $LOOPDEV --disable-keyring --header $HEADER_IMG $DEV_NAME || fail
	$CRYPTSETUP luksSuspend $DEV_NAME || fail
	echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail
	$CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "keyring" || fail
	$CRYPTSETUP close $DEV_NAME || fail

	echo $PWD1 | $CRYPTSETUP open $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail
	$CRYPTSETUP luksSuspend $DEV_NAME || fail
	echo $PWD1 | $CRYPTSETUP luksResume --disable-keyring $DEV_NAME --header $HEADER_IMG || fail
	$CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "dm-crypt" || fail
	$CRYPTSETUP close $DEV_NAME || fail
fi

# FIXME: candidate for non-root tests
prepare "[33] tokens" wipe
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail
if [ $HAVE_KEYRING -gt 0 ]; then

	test_and_prepare_keyring

	$CRYPTSETUP token add $LOOPDEV --key-description $TEST_TOKEN0 --token-id 3 || fail
	$CRYPTSETUP luksDump $LOOPDEV | grep -q -e "3: luks2-keyring" || fail
	# keyslot 5 is inactive
	$CRYPTSETUP token add $LOOPDEV --key-description $TEST_TOKEN1 --key-slot 5 2> /dev/null && fail
	# key description is not reachable
	$CRYPTSETUP open --token-only $LOOPDEV --test-passphrase && fail
	# wrong passphrase
	load_key user $TEST_TOKEN0 "blabla" "$TEST_KEYRING" || fail "Cannot load 32 byte user key type"
	$CRYPTSETUP open --token-only $LOOPDEV --test-passphrase 2>/dev/null && fail
	load_key user $TEST_TOKEN0 $PWD1 "$TEST_KEYRING" || fail "Cannot load 32 byte user key type"
	$CRYPTSETUP open --token-only $LOOPDEV --test-passphrase || fail
	$CRYPTSETUP open --token-only $LOOPDEV $DEV_NAME || fail
	$CRYPTSETUP status $DEV_NAME > /dev/null || fail
	$CRYPTSETUP close $DEV_NAME || fail
	$CRYPTSETUP token remove --token-id 3 $LOOPDEV || fail
	$CRYPTSETUP luksDump $LOOPDEV | grep -q -e "3: luks2-keyring" && fail

	# test we can remove keyslot with token
	echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey -S4 $FAST_PBKDF_OPT $LOOPDEV || fail
	$CRYPTSETUP token add $LOOPDEV --key-description $TEST_TOKEN1 --key-slot 4 || fail
	$CRYPTSETUP -q luksKillSlot $LOOPDEV 4 || fail
fi
echo -n "$IMPORT_TOKEN" | $CRYPTSETUP token import $LOOPDEV --token-id 10 || fail
echo -n "$IMPORT_TOKEN" | $CRYPTSETUP token import $LOOPDEV --token-id 11 --json-file - || fail
echo -n "$IMPORT_TOKEN" > $TOKEN_FILE0
$CRYPTSETUP token import $LOOPDEV --token-id 12 --json-file $TOKEN_FILE0 || fail
$CRYPTSETUP token import $LOOPDEV --token-id 12 --json-file $TOKEN_FILE0 2>/dev/null && fail
$CRYPTSETUP token export $LOOPDEV --token-id 10 | diff --from-file - $TOKEN_FILE0 || fail
$CRYPTSETUP token export $LOOPDEV --token-id 11 | diff --from-file - $TOKEN_FILE0 || fail
$CRYPTSETUP token export $LOOPDEV --token-id 12 | diff --from-file - $TOKEN_FILE0 || fail
$CRYPTSETUP token export $LOOPDEV --token-id 12 --json-file $TOKEN_FILE1 || fail
diff $TOKEN_FILE0 $TOKEN_FILE1 || fail
$CRYPTSETUP token export $LOOPDEV --token-id 12 > $TOKEN_FILE1 || fail
diff $TOKEN_FILE0 $TOKEN_FILE1 || fail

prepare "[34] LUKS keyslot priority" wipe
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -S 1 || fail
echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -S 5 || fail
$CRYPTSETUP config $LOOPDEV -S 0 --priority prefer && fail
$CRYPTSETUP config $LOOPDEV -S 1 --priority bla >/dev/null 2>&1 && fail
$CRYPTSETUP config $LOOPDEV -S 1 --priority ignore || fail
echo $PWD1 | $CRYPTSETUP open $LOOPDEV --test-passphrase 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP open $LOOPDEV --test-passphrase -S 1 || fail
echo $PWD2 | $CRYPTSETUP open $LOOPDEV --test-passphrase || fail
$CRYPTSETUP config $LOOPDEV -S 1 --priority normal || fail
echo $PWD1 | $CRYPTSETUP open $LOOPDEV --test-passphrase || fail
$CRYPTSETUP config $LOOPDEV -S 1 --priority ignore || fail
echo $PWD1 | $CRYPTSETUP open $LOOPDEV --test-passphrase 2>/dev/null && fail

prepare "[35] LUKS label and subsystem" wipe
echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail
$CRYPTSETUP luksDump $LOOPDEV | grep "Subsystem:" | grep -q "(no subsystem)" || fail
$CRYPTSETUP luksDump $LOOPDEV | grep "Label:" | grep -q "(no label)" || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --subsystem SatelliteTwo --label TheLabel || fail
$CRYPTSETUP luksDump $LOOPDEV | grep "Subsystem:" | grep -q "SatelliteTwo" || fail
$CRYPTSETUP luksDump $LOOPDEV | grep "Label:" | grep -q "TheLabel" || fail
$CRYPTSETUP config $LOOPDEV --subsystem SatelliteThree
$CRYPTSETUP luksDump $LOOPDEV | grep "Subsystem:" | grep -q "SatelliteThree" || fail
$CRYPTSETUP luksDump $LOOPDEV | grep "Label:" | grep -q "(no label)" || fail
$CRYPTSETUP config $LOOPDEV --subsystem SatelliteThree --label TheLabel
$CRYPTSETUP luksDump $LOOPDEV | grep "Subsystem:" | grep -q "SatelliteThree" || fail
$CRYPTSETUP luksDump $LOOPDEV | grep "Label:" | grep -q "TheLabel" || fail

prepare "[36] LUKS PBKDF setting" wipe
echo $PWD1 | $CRYPTSETUP luksFormat --type luks2 --pbkdf bla $LOOPDEV >/dev/null 2>&1 && fail
# Force setting, no benchmark. PBKDF2 has 1000 iterations as a minimum
echo $PWD1 | $CRYPTSETUP luksFormat --type luks2 --pbkdf pbkdf2   --pbkdf-force-iterations 999 $LOOPDEV 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf pbkdf2   --pbkdf-force-iterations 1234 $LOOPDEV || fail
$CRYPTSETUP luksDump $LOOPDEV | grep "Iterations:" | grep -q "1234" || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf argon2id --pbkdf-force-iterations 3 $LOOPDEV 2>/dev/null && fail
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf argon2id --pbkdf-force-iterations 4 --pbkdf-memory 100000 $LOOPDEV || can_fail_fips
$CRYPTSETUP luksDump $LOOPDEV | grep "PBKDF:" | grep -q "argon2id" || can_fail_fips
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf argon2i  --pbkdf-force-iterations 4 \
	--pbkdf-memory 1234 --pbkdf-parallel 1 $LOOPDEV || can_fail_fips
$CRYPTSETUP luksDump $LOOPDEV | grep "PBKDF:" | grep -q "argon2i" || can_fail_fips
$CRYPTSETUP luksDump $LOOPDEV | grep "Time cost:" | grep -q "4" || can_fail_fips
$CRYPTSETUP luksDump $LOOPDEV | grep "Memory:" | grep -q "1234" || can_fail_fips
$CRYPTSETUP luksDump $LOOPDEV | grep "Threads:" | grep -q "1" || can_fail_fips
# Benchmark
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf argon2i -i 500 --pbkdf-memory 1234 --pbkdf-parallel 1 $LOOPDEV || can_fail_fips
[ 0"$($CRYPTSETUP luksDump $LOOPDEV | grep "Time cost:" | cut -d: -f 2 | sed -e 's/\ //g')" -gt 0 ] || can_fail_fips
[ 0"$($CRYPTSETUP luksDump $LOOPDEV | grep "Memory:" | cut -d: -f 2 | sed -e 's/\ //g')" -gt 0 ] || can_fail_fips
echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf pbkdf2 -i 500 $LOOPDEV || fail
[ 0"$($CRYPTSETUP luksDump $LOOPDEV | grep -m1 "Iterations:" | cut -d' ' -f 2 | sed -e 's/\ //g')" -gt 1000 ] || fail

prepare "[37] LUKS Keyslot convert" wipe
$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks1 $LOOPDEV $KEY5 --key-slot 5 || fail
$CRYPTSETUP -q luksConvertKey $LOOPDEV --key-file $KEY5 2>/dev/null && fail
$CRYPTSETUP -q convert --type luks2 $LOOPDEV || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || fail
$CRYPTSETUP luksDump $LOOPDEV | grep "PBKDF:" | grep -q "pbkdf2" || fail
$CRYPTSETUP -q luksConvertKey $LOOPDEV -S 5 --key-file $KEY5 --pbkdf argon2i -i1 --pbkdf-memory 32 || can_fail_fips
$CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || can_fail_fips
echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -S 1 --key-file $KEY5 || fail
$CRYPTSETUP -q luksKillSlot $LOOPDEV 5 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail
$CRYPTSETUP luksDump $LOOPDEV | grep "PBKDF:" | grep -q "pbkdf2" || fail
echo $PWD1 | $CRYPTSETUP -q luksConvertKey $LOOPDEV -S 1 --pbkdf argon2i -i1 --pbkdf-memory 32 || can_fail_fips
$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || can_fail_fips
echo $PWD3 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT -S 21 --unbound -s 16 $LOOPDEV || fail
echo $PWD3 | $CRYPTSETUP luksConvertKey --pbkdf-force-iterations 1001 --pbkdf pbkdf2 -S 21 $LOOPDEV || fail

prepare "[38] luksAddKey unbound tests" wipe
$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY5 --key-slot 5 || fail
# unbound key may have arbitrary size
echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --unbound -s 16 $LOOPDEV || fail
echo $PWD2 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --unbound -s 32 -S 2 $LOOPDEV || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2 (unbound)" || fail
echo $PWD3 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --unbound -s 8 -S 3 --master-key-file /dev/urandom $LOOPDEV || fail
$CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2 (unbound)" || fail
# unbound key size is required
echo $PWD1 | $CRYPTSETUP -q luksAddKey --unbound $LOOPDEV 2>/dev/null && fail
echo $PWD3 | $CRYPTSETUP -q luksAddKey --unbound --master-key-file /dev/urandom $LOOPDEV 2> /dev/null && fail
# do not allow to replace keyslot by unbound slot
echo $PWD1 | $CRYPTSETUP -q luksAddKey -S5 --unbound -s 32 $LOOPDEV 2>/dev/null && fail
echo $PWD2 | $CRYPTSETUP -q open $LOOPDEV $DEV_NAME 2> /dev/null && fail
echo $PWD2 | $CRYPTSETUP -q open $LOOPDEV --test-passphrase || fail
echo $PWD2 | $CRYPTSETUP -q open -S2 $LOOPDEV $DEV_NAME 2> /dev/null && fail
echo $PWD2 | $CRYPTSETUP -q open -S2 $LOOPDEV --test-passphrase || fail
echo $PWD1 | $CRYPTSETUP -q open $LOOPDEV $DEV_NAME 2> /dev/null && fail
echo $PWD1 | $CRYPTSETUP -q open $LOOPDEV --test-passphrase || fail
# check we're able to change passphrase for unbound keyslot
echo -e "$PWD2\n$PWD3" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT -S 2 $LOOPDEV || fail
echo $PWD3 | $CRYPTSETUP open --test-passphrase $FAST_PBKDF_OPT -S 2 $LOOPDEV || fail
echo $PWD3 | $CRYPTSETUP -q open -S 2 $LOOPDEV $DEV_NAME 2> /dev/null && fail
# do not allow adding keyslot by unbound keyslot
echo -e "$PWD3\n$PWD1" | $CRYPTSETUP -q luksAddKey $LOOPDEV 2> /dev/null && fail
# check adding keyslot works when there's unbound keyslot
echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV --key-file $KEY5 -S8 || fail
echo $PWD1 | $CRYPTSETUP open $LOOPDEV $DEV_NAME || fail
$CRYPTSETUP close $DEV_NAME || fail
$CRYPTSETUP luksKillSlot -q $LOOPDEV 2
$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2 (unbound)" && fail
$CRYPTSETUP luksKillSlot -q $LOOPDEV 3
$CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2 (unbound)" && fail

prepare "[39] LUKS2 metadata variants" wipe
tar xJf luks2_mda_images.tar.xz
echo -n "$IMPORT_TOKEN" > $TOKEN_FILE0
for mda in 16 32 64 128 256 512 1024 2048 4096 ; do
	echo -n "[$mda KiB]"
	echo $PWD4 | $CRYPTSETUP open test_image_$mda $DEV_NAME || fail
	$CRYPTSETUP close $DEV_NAME || fail
	echo -e "$PWD4\n$PWD3" | $CRYPTSETUP luksAddKey -S9 $FAST_PBKDF_OPT test_image_$mda || fail
	echo $PWD4 | $CRYPTSETUP open --test-passphrase test_image_$mda || fail
	echo $PWD3 | $CRYPTSETUP open -S9 --test-passphrase test_image_$mda || fail
	echo -n "$IMPORT_TOKEN" | $CRYPTSETUP token import test_image_$mda --token-id 10 || fail
	$CRYPTSETUP token export test_image_$mda --token-id 10 | diff --from-file - $TOKEN_FILE0 || fail
	echo -n "[OK]"
done
echo

prepare "[40] LUKS2 metadata areas" wipe
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV 2> /dev/null || fail
DEFAULT_OFFSET=$($CRYPTSETUP luksDump $LOOPDEV | grep "offset: " | cut -f 2 -d ' ')
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks1 $LOOPDEV --key-size 256 --luks2-metadata-size=128k --luks2-keyslots-size=128k 2> /dev/null && fail
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --luks2-metadata-size=128k --luks2-keyslots-size=127k 2> /dev/null && fail
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --luks2-metadata-size=127k --luks2-keyslots-size=128k 2> /dev/null && fail
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --luks2-metadata-size=128k --luks2-keyslots-size=128M >/dev/null 2>&1 && fail
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --luks2-metadata-size=128k --luks2-keyslots-size=128k >/dev/null || fail
$CRYPTSETUP luksDump $LOOPDEV | grep "Metadata area:" | grep -q "131072 \[bytes\]" || fail
$CRYPTSETUP luksDump $LOOPDEV | grep "Keyslots area:" | grep -q "131072 \[bytes\]" || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --luks2-metadata-size=128k || fail
$CRYPTSETUP luksDump $LOOPDEV | grep "Metadata area:" | grep -q "131072 \[bytes\]" || fail
$CRYPTSETUP luksDump $LOOPDEV | grep "Keyslots area:" | grep -q "$((DEFAULT_OFFSET-2*131072)) \[bytes\]" || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --luks2-keyslots-size=128k >/dev/null || fail
$CRYPTSETUP luksDump $LOOPDEV | grep "Metadata area:" | grep -q "16384 \[bytes\]" || fail
$CRYPTSETUP luksDump $LOOPDEV | grep "Keyslots area:" | grep -q "131072 \[bytes\]" || fail
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --offset 16384 || fail
$CRYPTSETUP luksDump $LOOPDEV | grep "Metadata area:" | grep -q "16384 \[bytes\]" || fail
$CRYPTSETUP luksDump $LOOPDEV | grep "Keyslots area:" | grep -q "8355840 \[bytes\]" || fail
# data offset vs area size
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --offset 64 --luks2-keyslots-size=8192 >/dev/null 2>&1 && fail
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --offset $((256+56)) >/dev/null 2>&1 && fail
echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --offset $((256+64)) >/dev/null || fail

prepare "[41] Per-keyslot encryption parameters" wipe
KEYSLOT_CIPHER="aes-cbc-plain64"
$CRYPTSETUP -q luksFormat --type luks2 $LOOPDEV $KEY1 $FAST_PBKDF_OPT --key-slot 0 --keyslot-cipher $KEYSLOT_CIPHER --keyslot-key-size 128 || fail
[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "0: luks2" | grep "Cipher:"    | sed -e 's/[[:space:]]\+Cipher:\ \+//g')" = $KEYSLOT_CIPHER ] || fail
[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "0: luks2" | grep "Cipher key:"| sed -e 's/[[:space:]]\+Cipher\ key:\ \+//g')" = "128 bits" ] || fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT --key-slot 1 --keyslot-cipher $KEYSLOT_CIPHER --keyslot-key-size 128 || fail
[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "1: luks2" | grep "Cipher:"    | sed -e 's/[[:space:]]\+Cipher:\ \+//g')" = $KEYSLOT_CIPHER ] || fail
[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "1: luks2" | grep "Cipher key:"| sed -e 's/[[:space:]]\+Cipher\ key:\ \+//g')" = "128 bits" ] || fail
$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT --key-slot 2 || fail
$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 $KEY1 --key-slot 2 --keyslot-cipher $KEYSLOT_CIPHER --keyslot-key-size 128 || fail
[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "2: luks2" | grep "Cipher:"    | sed -e 's/[[:space:]]\+Cipher:\ \+//g')" = $KEYSLOT_CIPHER ] || fail
[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "2: luks2" | grep "Cipher key:"| sed -e 's/[[:space:]]\+Cipher\ key:\ \+//g')" = "128 bits" ] || fail
# unbound keyslot
echo $PWD3 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --key-slot 21 --unbound -s 32 --keyslot-cipher $KEYSLOT_CIPHER --keyslot-key-size 128 $LOOPDEV || fail
[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "21: luks2" | grep "Cipher:"    | sed -e 's/[[:space:]]\+Cipher:\ \+//g')" = $KEYSLOT_CIPHER ] || fail
[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "21: luks2" | grep "Cipher key:"| sed -e 's/[[:space:]]\+Cipher\ key:\ \+//g')" = "128 bits" ] || fail
echo $PWD3 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --key-slot 22 --unbound -s 32 $LOOPDEV || fail
echo $PWD3 | $CRYPTSETUP luksConvertKey --key-slot 22 $LOOPDEV --keyslot-cipher $KEYSLOT_CIPHER --keyslot-key-size 128 $LOOPDEV || fail
[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "22: luks2" | grep "Cipher:"    | sed -e 's/[[:space:]]\+Cipher:\ \+//g')" = $KEYSLOT_CIPHER ] || fail
[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "22: luks2" | grep "Cipher key:"| sed -e 's/[[:space:]]\+Cipher\ key:\ \+//g')" = "128 bits" ] || fail

remove_mapping
exit 0