summaryrefslogtreecommitdiffstats
path: root/doc/triggers.txt
diff options
context:
space:
mode:
Diffstat (limited to 'doc/triggers.txt')
-rw-r--r--doc/triggers.txt813
1 files changed, 813 insertions, 0 deletions
diff --git a/doc/triggers.txt b/doc/triggers.txt
new file mode 100644
index 0000000..d5a77d5
--- /dev/null
+++ b/doc/triggers.txt
@@ -0,0 +1,813 @@
+TRIGGERS
+========
+
+Introduction
+------------
+
+A dpkg trigger is a facility that allows events caused by one package
+but of interest to another package to be recorded and aggregated, and
+processed later by the interested package. This feature simplifies
+various registration and system-update tasks and reduces duplication
+of processing.
+
+(NB: Triggers are intended for events that occur during package
+installation, not events that occur in general operation.)
+
+
+Concepts
+--------
+
+Each trigger is named, and at any time zero or more packages may be
+interested in it.
+
+We currently envisage three kinds of triggers:
+ * Explicit triggers. These can be activated by any program
+ by running dpkg-trigger (at any time, but ideally from a maintainer
+ script).
+ * File triggers. These are activated automatically by dpkg
+ when a matching file is installed, upgraded or removed as part
+ of a package. They may also be explicitly activated by running
+ dpkg-trigger.
+ * Future kinds of special triggers, which are activated by magic code
+ in dpkg itself. Currently none are defined besides file triggers.
+
+A trigger is always activated by a particular package.
+
+Trigger names contain only printing 7-bit ascii characters (no
+whitespace). Each trigger kind has a distinct subset of the trigger
+name space so that the kind can be determined from the name. After we
+run out of straightforward syntaxes, we will use <kind>:<details>.
+
+When a trigger is activated, it becomes pending for every package
+which is interested in the trigger at that time. Each package has a
+list of zero or more pending triggers. Repeated activation of the
+same trigger has no additional effect. Note that in general a trigger
+will not be processed immediately when it is activated; processing is
+deferred until it is convenient (as described below).
+
+At a trigger activation, the interested packages(s) are added to the
+triggering package's list of triggers-awaited packages (unless the
+trigger has been configured to not require it); the triggering
+package is said to await the trigger processing.
+
+A package which has pending triggers, or which awaits triggers, is not
+considered properly installed. There are two new dpkg status values,
+‘triggers-pending’ and ‘triggers-awaited’, which lie between
+‘config-failed’ and ‘installed’.
+
+
+Details - Overview table
+------------------------
+
+ Status Pending Awaited Satisfies Remedy
+ triggers triggers Depends
+
+ unpacked never maybe No postinst configure
+ c.-failed never maybe No postinst configure (when requested)
+ t.-awaited yes always No postinst triggered + fix awaited pkg(s)
+ t.-awaited no always No fix awaited package(s)
+ t.-pending always never Yes postinst triggered
+ installed never never Yes n/a
+
+Packages in t-awaited and t-pending demand satisfaction of their
+dependencies just like packages in installed.
+
+
+Details - triggering package
+----------------------------
+
+When a package T activates a trigger in which a package I is
+interested, I is added to the list of packages whose trigger
+processing is awaited by T. Zero or more packages I may be added as a
+result of any particular trigger activation, depending on how many
+packages were interested. (If T chooses, explicit trigger activation
+using dpkg-trigger of I by T need not make T become triggers-awaited
+in this way.)
+
+A package which awaits trigger processing but would otherwise be
+‘installed’ or ‘triggers-pending’ is considered to be in state
+‘triggers-awaited’. Packages in ‘triggers-awaited’ do not satisfy
+Depends dependencies.
+
+Every triggered package I in T's list of awaited packages either has a
+nonempty list of pending triggers, or is in ‘config-failed’ or worse.
+When I enters ‘installed’ (or ‘config-files’ or ‘not-installed’), the
+entry in T's list of awaited packages is removed so that T may, if it
+no longer awaits any packages, become ‘installed’ or ‘triggers-pending’.
+
+Packages in ‘config-files’ or ‘not-installed’ do not await triggers.
+
+
+Details - triggered package
+---------------------------
+
+When one of the triggers in which a package is interested is
+activated, the triggered package has the trigger added to its list of
+pending triggers. Packages with a nonempty list of pending triggers
+which would otherwise be in state ‘installed’ are in state
+‘triggers-pending’ instead, so if the package was previously
+‘installed’ it becomes ‘triggers-pending’.
+
+If a package has nonempty lists both of pending and awaited triggers,
+then it is in ‘triggers-awaited’. Nevertheless efforts will still be
+made to process its triggers so as to make the list of pending
+triggers empty.
+
+To restore a package in state ‘triggers-pending’ to ‘installed’, or to
+process pending triggers of a package with both pending and awaited
+triggers, dpkg will run the postinst script:
+ postinst triggered "<trigger-name> <trigger-name> ..."
+
+This will be attempted for each relevant package at the end of each
+dpkg run; so, normally, in the same dpkg run as the event which made
+the package go to ‘triggers-pending’. This leaves packages in
+reasonable states by default.
+
+If the “postinst triggered” run fails the package goes to
+‘config-failed’, so that the trigger processing will not be attempted
+again until explicitly requested.
+
+
+ │
+ v
+ ┌────────────┐
+ │ unpacked │
+ └─────┬──────┘
+ │
+ │
+ (automatic)│ ┌───────────────┐
+ │ │ config-failed │
+ │ └─────┬─────────┘
+ │ │ ^
+ │ │ │
+ ├──────<─────┘ │ ┌──────────────────────────────────┐
+ │ (user request) │ │ triggers-pending │
+ postinst │ │ │ or │
+ "configure" │ │ │ triggers-awaited w/ some pending │
+ │ │ └────────────┬─────────────────────┘
+ │ │ │ ^
+ ├────────>───────┤ postinst │ │
+ │ error │ "triggered" │ │
+ │ │ (automatic) │ │
+ │ │ │ │ trigger(s)
+ │ │ │ │ activated
+ │ └────────<─────────┤ │
+ │ error │ │
+ │ │ │
+ v v │
+ ┌──────────────────────────────────────────────┴────┐
+ │ installed or triggers-awaited w/ none pending │
+ └───────────────────────────────────────────────────┘
+
+Packages in ‘config-failed’ or worse are never considered to have
+lists of pending triggers. A package whose postinst is being run
+can however acquire pending triggers during that run (ie, a package
+can trigger itself).
+
+This means that if a triggering package T awaits trigger processing by
+an interested package I, and I goes to ‘config-failed’ or worse (eg,
+during unpack for upgrade), then when I is reconfigured (goes to
+‘installed’) or removed, T will no longer await processing by I, so
+that T may automatically go from ‘triggers-awaited’ to ‘installed’.
+
+Or to put it another way, triggered actions are considered irrelevant
+if the interested package I is not configured. When I's postinst is
+called with ‘configure’, it must do whatever actions are necessary to
+deal with any trigger activations which might have occurred while it
+was not configured, just as if the package was being configured for
+the first time.
+
+Trigger processing should be idempotent. The list of triggers being
+processed is provided to the postinst only so that it can optimize
+away redundant processing.
+
+In that case, where an interested package has more than one trigger
+and wants to process them differently, the list of triggers can be can
+be examined in a shell script like this:
+ case " $2 " in
+ *" trigger-name-a "*) process-trigger-a ;;
+ esac
+Generally each trigger name should be tested for separately, as the
+postinst will often be called for several triggers at once.
+
+Note that if a package both activates triggers in other packages, and
+is interested in triggers of its own, its postinst may run for trigger
+processing before the postinst(s) of the package(s) it has triggered.
+
+
+Timing guarantees, races, etc.
+------------------------------
+
+Activating a trigger will not have any immediate effect, although
+putative resulting status changes will show up in dpkg --status etc.
+(Putative because the actual status changes may depend on the state of
+trigger interests when dpkg processes the trigger activation into
+the status database, rather than that when dpkg --status is run.)
+
+A package is only guaranteed to become notified of a trigger
+activation if it is continuously interested in the trigger, and never
+in ‘config-failed’ or worse, during the period from when the trigger
+is activated until dpkg runs the package postinst (either due to
+--configure --pending, or at the end of the relevant run, as described
+above). Subsequent to activation and before notification, the
+interested package will not be considered in state ‘installed’, so
+long as the package remains interested, and the triggering package
+will not be considered ‘installed’.
+
+If the package is not in state ‘installed’, ‘triggers-pending’ or
+‘triggers-awaited’ then pending triggers are not accumulated.
+However, if such a package (between ‘half-installed’ and
+‘config-failed’ inclusive) declares some trigger interests then the
+triggering packages *will* await their configuration (which implies
+completion of any necessary trigger processing) or removal.
+
+It is not defined in what order triggers will run. dpkg will make
+some effort to minimize redundant work in the case where many packages
+have postinst trigger processing activating another package's triggers
+(for example, by processing triggers in fifo order during a single
+dpkg run). Cycles in the triggering graph are prohibited and will
+eventually, perhaps after some looping, be detected by dpkg and cause
+trigger processing to fail; when this happens one of the packages
+involved will be put in state ‘config-failed’ so that the trigger loop
+will not be reattempted. See “Cycle detection” below.
+
+
+Explicit triggers
+-----------------
+
+Explicit triggers have names with the same syntax as package names,
+*but* should *not* normally be named identically to a package.
+
+When choosing an explicit trigger name it is usually good to include a
+relevant package name or some other useful identifier to help make the
+trigger name unique. On the other hand, explicit triggers should
+generally not be renamed just because the interested or triggering
+packages' names change.
+
+Explicit trigger names form part of the interface between packages.
+Therefore in case of wider use of any trigger the name and purpose
+should be discussed in the usual way and documented in the appropriate
+packaging guidelines (eg, in the distribution policy).
+
+
+File triggers
+-------------
+
+File triggers have names of the form
+ /path/to/directory/or/file
+and are activated when the specified filesystem object, or any object
+under the specified subdirectory, is created, updated or deleted by
+dpkg during package unpack or removal. The pathname must be absolute.
+
+File triggers should not generally be used without mutual consent.
+The use of a file trigger, and the name of the trigger used, should be
+stated in the distribution policy, so that a package which creates a
+relevant file in a maintainer script can activate the trigger explicitly.
+
+File triggers must definitely not be used as an escalation tool in
+disagreements between different packages as to the desired contents of
+the filesystem. Trigger activation due to a particular file should
+not generally modify that file again.
+
+Configuration files (whether dpkg-handled conffiles or not), or any
+other files which are modified at times other than package management,
+should not rely on file triggers detecting all modifications; dpkg
+triggers are not a general mechanism for filesystem monitoring.
+
+If there are or might be directory symlinks which result in packages
+referring to files by different names, then to be sure of activation
+all of the paths which might be included in packages should be listed.
+The path specified by the interested package is matched against the
+path included in the triggering package, not against the truename of
+the file as installed. Only textually identical filenames (or
+filenames where the interest is a directory prefix of the installed
+file) are guaranteed to match.
+
+A file trigger is guaranteed to be activated before the file in
+question is modified by dpkg; on the other hand, a file trigger might
+be activated even though no file was actually modified. Changes made
+by dpkg to the link count of a file, or to solely the inode number
+(ie, if dpkg atomically replaces it with another identical file), are
+not guaranteed to cause trigger activation.
+
+Because of the restriction on trigger names, it is not possible to
+declare a file trigger for a directory whose name contains whitespace,
+i18n characters, etc. Such a trigger should not be necessary.
+
+
+Package declarations regarding triggers
+---------------------------------------
+
+See deb-triggers(5).
+
+Support future extension of the trigger name syntax with additional
+dpkg-generated triggers is as follows: a package which is interested
+in any unsupported trigger kinds cannot be configured (since such a
+package cannot be guaranteed to have these triggers properly activated
+by dpkg). Therefore no package can be interested in any unsupported
+trigger kinds and they can be freely activated (both by ‘activate’ and
+by dpkg-trigger). dpkg-deb will be changed to warn about unrecognized
+trigger names syntaxes and unrecognized trigger control directives.
+
+
+New command line interfaces to dpkg tools
+-----------------------------------------
+
+See dpkg(1).
+
+Here is a summary of the behaviours:
+
+ Command line Trigproc Trigproc Configure
+ these any triggered
+ ----------------------+---------------+---------------+-----------------
+ --unpack no usually[1] none
+ --remove n/a usually[1] none
+ --install n/a usually[1] these
+ --configure -a any needed usually[1] any needed
+ --configure <some> if needed usually[1] must, or trigproc
+ --triggers-only -a any needed usually[1] none
+ --triggers-only <some> must usually not[1] none
+
+ [1] can be specified explicitly by --triggers or --no-triggers
+
+
+See dpkg-trigger(1).
+
+A trigger may be activated explicitly with:
+ dpkg-trigger [--by-package <package>] <name-of-trigger>
+ dpkg-trigger --no-await <name-of-trigger>
+
+There will be no output to stdout, and none to stderr unless
+dpkg-trigger is unable to make a record of the trigger activation.
+
+NB that in the case of a file trigger the name of the trigger is
+needed, not the name of a file which would match the trigger.
+
+
+apt and aptitude
+----------------
+
+These must be taught about the new ‘triggers-awaited’ and
+‘triggers-pending’ states. Packages in these states should be treated
+roughly like those in ‘unpacked’: the remedy is to run dpkg
+--configure.
+
+Normally apt and aptitude will not see packages in ‘triggers-pending’
+since dpkg will generally attempt to run the triggers thus leaving the
+package in ‘config-failed’ or ‘installed’.
+
+Note that automatic package management tools which call dpkg (like apt
+and aptitude) should not attempt to configure individual packages in
+state ‘triggers-pending’ (or indeed ‘triggers-awaited’) with dpkg
+--triggers-only <package>... or dpkg --no-triggers --configure <package>...,
+or similar approaches. This might defeat dpkg's trigger cycle detection.
+
+A package management tool which will run dpkg --configure --pending at
+the end may use --no-triggers on its other dpkg runs. This would be
+more efficient as it allows more aggressive deferral (and hence more
+unification) of trigger processing.
+
+
+Error handling
+--------------
+
+Packages should be written so that they DO NOT BREAK just because
+their pending triggers have not yet been run. It is allowed for the
+functionality relating to the unprocessed trigger to fail (ie, the
+package which is awaiting the trigger processing may be broken), but
+the remainder of the interested package must work normally.
+
+For example, a package which uses file triggers to register addons
+must cope with (a) an addon being dropped into the filesystem but not
+yet registered and (b) an addon being removed but not yet
+deregistered. In both of these cases the package's main functionality
+must continue to work normally; failure of the addon in question is
+expected, warning messages are tolerable, but complete failure of the
+whole package, or failures of other addons, are not acceptable.
+
+dpkg cannot ensure that triggers are run in a timely enough manner for
+pathological error behaviours to be tolerable.
+
+
+Where a trigger script finds bad data provided by a triggering
+package, it should generally report to stderr the problem with the bad
+data and exit nonzero, leaving the interested package in config-failed
+and the triggering package in triggers-awaited and thus signalling the
+problem to the user.
+
+Alternatively, in some situations it may be more desirable to allow
+the interested package to be configured even though it can only
+provide partial service. In this case clear information will have to
+be given in appropriate places about the missing functionality, and a
+record should be made of the cause of the errors. This option is
+recommended for situations where the coupling between the interested
+and triggering package is particularly loose; an example of such a
+loose coupling would be Python modules.
+
+
+
+WORKED EXAMPLE - SCROLLKEEPER
+=============================
+
+Currently, every Gnome program which comes with some help installs the
+help files in /usr/share/gnome/help and then in the postinst runs
+scrollkeeper-update. scrollkeeper-update reads, parses and rewrites
+some large xml files in /var/lib/scrollkeeper; currently this
+occurs at every relevant package installation, upgrade or removal.
+
+When triggers are available, this will work as follows:
+
+ * gnome-foobar will ship its «omf» file in /usr/share/omf as
+ normal, but will not contain any special machinery to invoke
+ scrollkeeper.
+
+ * scrollkeeper will in its triggers control file say:
+ interest /usr/share/omf
+ and in its postinst say:
+ scrollkeeper-update-now -q
+
+ dpkg will arrange that this is run once at the end of each run
+ where any documentation was updated.
+
+ Note that it is not necessary to execute this only on particular
+ postinst "$1" values; however, at the time of writing, scrollkeeper
+ does this:
+
+ if [ "$1" = "configure" ]; then
+ printf "Rebuilding the database. This may take some time.\n"
+ scrollkeeper-rebuilddb -q
+ fi
+
+ and to retain this behaviour, something along the following lines
+ would be sensible:
+
+ if [ "$1" = "configure" ]; then
+ printf "Rebuilding the database. This may take some time.\n"
+ scrollkeeper-rebuilddb -q
+ else
+ printf "Updating GNOME help database.\n"
+ scrollkeeper-update-now -q
+ fi
+
+ * dh_scrollkeeper will only adjust the DTD declarations and no longer
+ edit maintainer scripts.
+
+
+Full implementation of the transition plan defined below, for
+scrollkeeper, goes like this:
+
+ 1. Update scrollkeeper:
+ - Add a ‘triggers’ control archive file containing
+ interest /usr/share/omf
+ - Make the postinst modifications as described above.
+ - Rename scrollkeeper-update to scrollkeeper-update-now
+ - Provide a new wrapper script as scrollkeeper-update:
+ #!/bin/sh
+ set -e
+ if type dpkg-trigger >/dev/null 2>&1 && \
+ dpkg-trigger /usr/share/omf; then
+ exit 0
+ fi
+ exec scrollkeeper-update-now "$@"
+
+ 2. In gnome-policy chapter 2, “Use of scrollkeeper”,
+ - delete the requirement that the package must depend on
+ scrollkeeper
+ - delete the requirement that the package must invoke
+ scrollkeeper in the postinst and postrm
+ - instead say:
+
+ OMF files should be installed under /usr/share/omf in the
+ usual way. A dpkg trigger is used to arrange to update the
+ scrollkeeper documentation index automatically and no special
+ care need be taken in packages which supply OMFs.
+
+ If an OMF file is placed, modified or removed other than as
+ a file installed in the ordinary way by dpkg, the dpkg file
+ trigger «/usr/share/omf» should be activated; see the dpkg
+ triggers specification for details.
+
+ Existing packages which Depend on scrollkeeper (>= 3.8)
+ because of dh_scrollkeeper or explicit calls to
+ scrollkeeper-update should be modified not to Depend on
+ scrollkeeper.
+
+ 3. Update debhelper's dh_scrollkeeper not to edit maintainer
+ scripts. One of dh_scrollkeeper or lintian should be changed to
+ issue a warning for packages with scrollkeeper (>= 3.8) in the
+ Depends control file line.
+
+ 4. Remove the spurious dependencies on scrollkeeper, at our leisure.
+ As a bonus, after this is complete it will be possible to remove
+ scrollkeeper while keeping all of the documentation-supplying
+ gnome packages installed.
+
+ 5. If there are any packages which do by hand what dh_scrollkeeper
+ does, change them not to call scrollkeeper-update and drop
+ their dependency on scrollkeeper.
+
+This is not 100% in keeping with the full transition plan defined
+below: if a new gnome package is used with an old scrollkeeper, there
+is some possibility that the help will not properly be available.
+
+Unfortunately, dh_scrollkeeper doesn't generate the scrollkeeper
+dependency in the control file, which makes it excessively hard to get
+the dependency up to date. The bad consequences of the inaccurate
+dependencies are less severe than the contortions which would be
+required to deal with the problem.
+
+
+TRANSITION PLAN
+===============
+
+
+Old dpkg to new dpkg
+--------------------
+
+The first time a trigger-supporting dpkg is run on any system, it will
+activate all triggers in which anyone is interested, immediately.
+
+These trigger activations will not be processed in the same dpkg run,
+to avoid unexpectedly processing triggers while attempting an
+unrelated operation. dpkg --configure --pending (and not other dpkg
+operations) will run the triggers, and the dpkg postinst will warn the
+user about the need to run it (if this deferred triggers condition
+exists). (Any triggers activated or reactivated *after* this
+mass-activation will be processed in the normal way.)
+
+To use this correctly:
+ * Packages which are interested in triggers, or which want to
+ explicitly activate triggers, should Depend on the
+ triggers-supporting version of dpkg.
+ * Update instructions and tools should arrange to run
+ dpkg --configure --pending
+ after the install; this will process the pending triggers.
+
+dpkg's prerm will check for attempts to downgrade while triggers are
+pending and refuse. (Since the new dpkg would be installed but then
+refuse to read the status file.) In case this is necessary a separate
+tool will be provided which will:
+ * Put all packages with any pending triggers into state
+ ‘config-failed’ and remove the list of pending triggers.
+ * Remove the list of awaited triggers from every package. This
+ may cause packages to go from ‘triggers-awaited’ to ‘installed’
+ which is not 100% accurate but the best that can be done.
+ * Remove /var/lib/dpkg/triggers (to put the situation to that which
+ we would have seen if the trigger-supporting dpkg had never been
+ installed).
+
+
+Higher-level programs
+---------------------
+
+The new dpkg will declare versioned Conflicts against apt and aptitude
+and other critical package management tools which will be broken by
+the new Status field values. Therefore, the new higher-level tools
+will have to be deployed first.
+
+The new dpkg will declare versioned Breaks against any known
+noncritical package management tools which will be broken by the new
+Status field value.
+
+
+Transition hints for existing packages
+--------------------------------------
+
+When a central (consumer) package defines a directory where other leaf
+(producer) packages may place files and/or directories, and currently
+the producer packages are required to run an «update-consumer» script
+in their postinst:
+ 1. In the relevant policy, define a trigger name which is the name of
+ the directory where the individual files are placed by producer
+ packages.
+ 2. Update the consumer package:
+ * Declare an interest in the trigger.
+ * Edit «update-consumer» so that if it is called without --real
+ it does the following:
+ if type dpkg-trigger >/dev/null 2>&1 && \
+ dpkg-trigger name-of-trigger; then
+ exit 0
+ fi
+ If this fails to cause «update-consumer» to exit, it should do
+ its normal update processing. Alternatively, if it is more
+ convenient, «update-consumer» could be renamed and supplanted with
+ a wrapper script which conditionally runs the real
+ «update-consumer».
+ * In the postinst, arrange for the new ‘triggered’ invocation to
+ run «update-consumer --real». The consumer package's postinst
+ will already run «update-consumer» during configuration, and this
+ should be retained and supplemented with the --real option (or
+ changed to call the real script rather than the wrapper).
+ 3. Update the producer packages:
+ * In the postinst, remove the call to «update-consumer».
+ * Change the dependency on consumer to be versioned, specifying a
+ trigger-interested consumer.
+ This can be done at our leisure. Ideally for loosely coupled
+ packages this would be done only in the release after the one
+ containing the triggers-interested consumer, to facilitate partial
+ upgrades and backports.
+ 4. After all producer packages have been updated according to step 3,
+ «update-consumer» has become an interface internal to the consumer
+ and need no longer be kept stable. If un-updated producers are
+ still of interest, incompatible changes to «update-consumer» imply
+ a versioned Breaks against the old producers.
+(See also “Transition plan”, below.)
+
+If there are several consumer packages all of which are interested in
+the features provided by producer packages, the current arrangements
+usually involve an additional central switchboard package (eg,
+emacsen-common). In this case:
+
+ -- NOTE - this part of the transition plan is still a proof of
+ concept and we might yet improve on it
+
+ 1. Define the trigger name.
+ 2. Update the switchboard to have any new functionality needed by the
+ consumers in step 3 (2nd bullet).
+ 3. Update the consumer packages:
+ * Declare an interest in the trigger.
+ * In the postinst, arrange for the new ‘trigger’ invocation to run
+ the compilation/registration process. This may involve scanning
+ for new or removed producers, and may involve new common
+ functionality from the switchboard (in which case a versioned
+ Depends is needed).
+ * The old interface allowing the switchboard to run
+ compilation/registration should be preserved, including
+ calls to the switchboard to register this consumer.
+ 4. When all consumers have been updated, update the switchboard:
+ * Make the registration scripts called by producers try to
+ activate the trigger and if that succeeds quit without
+ doing any work (as for bullet 2 in the simple case above).
+ * Versioned Breaks, against the old (pre-step-3) consumers.
+ 5. After the switchboard has been updated, producers can be updated:
+ * Remove the calls to the switchboard registration/compilation
+ functions.
+ * Change the dependency on the switchboard to a versioned one,
+ specifying the one which Breaks old consumers. Alternatively,
+ it may be the case that the switchboard is no longer needed (or
+ not needed for this producer), in which case the dependency on
+ the switchboard can be removed in favour of an appropriate
+ versioned Breaks (probably, identical to that in the new
+ switchboard).
+ 6. After all the producers have been updated, the cruft in the
+ consumers can go away:
+ * Remove the calls to the switchboard's registration system.
+ * Versioned Breaks against old switchboards, or versioned Depends
+ on new switchboards, depending on whether the switchboard is
+ still needed for other common functionality.
+ 7. After all of the producers and consumers have been updated, the
+ cruft in the switchboard can go away:
+ * Remove the switchboard's registration system (but not obviously
+ the common functionality from step 3, discussed above).
+ * Versioned Breaks against pre-step-6 consumers and pre-step-5
+ producers.
+
+
+DISCUSSION
+==========
+
+The activation of a trigger does not record details of the activating
+event. For example, file triggers do not inform the package of the
+filename. In the future this might be added as an additional feature,
+but there are some problems with this.
+
+
+Broken producer packages, and error reporting
+---------------------------------------------
+
+Often trigger processing will involve a central package registering,
+compiling or generally parsing some data provided by a leaf package.
+
+If the central package finds problems with the leaf package data it is
+usually more correct for only the individual leaf package to be
+recorded as not properly installed. There is not currently any way to
+do this and there are no plans to provide one.
+
+The naive approach of giving the postinst a list of the triggering
+packages does not work because this information is not recorded in the
+right way (it might suffer from lacunae); enhancing the bookkeeping
+for this to work would be possible but it is far better simply to make
+the system more idempotent. See above for the recommended approach.
+
+
+
+
+INTERNALS
+=========
+
+On-disk state
+-------------
+
+A single file /var/lib/dpkg/triggers/File lists all of the filename
+trigger interests in the form
+ /path/to/directory/or/file package
+
+For each explicit trigger in which any package is interested,
+a file /var/lib/dpkg/triggers/<name-of-trigger> is a list of
+the interested packages, one per line.
+
+These interest files are not updated to remove a package just because
+a state change causes it not to be interested in any triggers any more
+- they are updated when we remove or unpack.
+
+For each package which has pending triggers, the status file contains
+a Triggers-Pending field which contains the space-separated names of
+the pending triggers. For each package which awaits triggers the
+status file contains a Triggers-Awaited field which contains the
+*package* names of the packages whose trigger processing is awaited.
+See “Details - Overview table” above for the invariants which relate
+Triggers-Pending, Triggers-Awaited, and Status.
+
+During dpkg's execution, /var/lib/dpkg/triggers/Unincorp is a list of
+the triggers which have been requested by dpkg-trigger but not yet
+incorporated in the status file. Each line is a trigger name followed
+by one or more triggering package names. The triggering package name
+"-" is used to indicate one or more package(s) which did not need to
+await the trigger.
+
+/var/lib/dpkg/triggers/Lock is the fcntl lockfile for the trigger
+system. Processes hang onto this lock only briefly: dpkg-trigger
+to add new activations, or dpkg to incorporate activations (and
+perhaps when it updates interests). Therefore this lock is always
+acquired with F_GETLKW so as to serialize rather than fail on
+contention.
+
+
+Processing
+----------
+
+dpkg-trigger updates triggers/Unincorp, and does not read or write the
+status file or take out the dpkg status lock. dpkg (and dpkg-query)
+reads triggers/Unincorp after reading /var/lib/dpkg/status, and after
+running a maintainer script. If the status database is opened for
+writing then the data from Unincorp is moved to updates as
+Triggers-Pending and Triggers-Awaited entries and corresponding Status
+changes.
+
+This means that dpkg is guaranteed to reincorporate pending trigger
+information into the status file only 1. when a maintainer script has
+finished, or 2. when dpkg starts up with a view to performing some
+operation.
+
+When a package is unpacked or removed, its triggers control file will
+be parsed and /var/lib/dpkg/triggers/* updated accordingly.
+
+Triggers are run as part of configuration. dpkg will try to first
+configure all packages which do not depend on packages which are
+awaiting triggers, and then run triggers one package at a time in the
+hope of making useful progress. (This will involve a new ‘dependtry’
+level in configure.c's algorithm.) The only constraint on the
+ordering of postinsts is only the normal Depends constraint, so the
+usual Depends cycle breaking will function properly. See “Cycle
+detection” below regarding cycles in the “A triggers B” relation.
+
+
+Processing - Transitional
+-------------------------
+
+The case where a triggers-supporting dpkg is run for the first time is
+detected by the absence of /var/lib/dpkg/triggers/Unincorp. When the
+triggers-supporting dpkg starts up without this it will set each
+package's list of pending triggers equal to its interests (obviously
+only for packages which are in ‘installed’ or ‘triggers-pending’).
+This may result in a package going from ‘installed’ to
+‘triggers-pending’ but it will not create the directory at this time.
+Packages marked as triggers-pending in this way will not be scheduled
+for trigger processing in this dpkg run.
+
+dpkg will also at this time create /var/lib/dpkg/triggers if
+necessary, triggers/File, triggers/Unincorp, and the per-trigger
+package lists in /var/lib/dpkg/triggers/<trigger-name>, so that future
+trigger activations will be processed properly.
+
+Only dpkg may create /var/lib/dpkg/triggers and only when it is
+holding the overall dpkg status lock.
+
+dpkg and/or dpkg-deb will be made to reject packages containing
+Triggers-Pending and Triggers-Awaited control file fields, to prevent
+accidents.
+
+
+Cycle detection
+---------------
+
+In addition to dependency cycles, triggers raise the possibility of
+mutually triggering packages - a cycle detectable only dynamically,
+which we will call a “trigger cycle”.
+
+Trigger cycles are detected using the usual hare-and-tortoise
+approach. Each time after dpkg runs a postinst for triggers, dpkg
+records the set of pending triggers (ie, the set of activated <pending
+package, trigger name> tuples). If the hare set is a superset of the
+tortoise set, a cycle has been found.
+
+For guaranteed termination, it would be sufficient to declare a cycle
+only when the two sets are identical, but because of the requirement
+to make progress we can cut this short. Formally, there is supposed
+to be a complete ordering of pending trigger sets satisfying the
+condition that any set of pending triggers is (strictly) greater than
+all its (strict) subsets. Trigger processing is supposed to
+monotonically decrease the set in this ordering. (The set elements
+are <package, trigger name> tuples.)
+
+(See “Processing” above for discussion of dependency cycles.)