diff options
Diffstat (limited to '')
| -rw-r--r-- | dselect/po/zh_TW.po | 1815 |
1 files changed, 1815 insertions, 0 deletions
diff --git a/dselect/po/zh_TW.po b/dselect/po/zh_TW.po new file mode 100644 index 0000000..f961365 --- /dev/null +++ b/dselect/po/zh_TW.po @@ -0,0 +1,1815 @@ +# Traditional Chinese translation for dselect. +# Copyright © 2004 Dpkg Developers +# This file is distributed under the same license as the dpkg package. +# +msgid "" +msgstr "" +"Project-Id-Version: dselect 1.13\n" +"Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org\n" +"POT-Creation-Date: 2022-05-24 11:39+0000\n" +"PO-Revision-Date: 2015-07-28 05:56+0200\n" +"Last-Translator: Asho Yeh <ashoyeh@gmail.com>\n" +"Language-Team: Chinese (traditional) <debian-l10n-chinese@lists.debian.org>\n" +"Language: zh_TW\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Poedit-Language: Chinese\n" +"X-Poedit-Country: TAIWAN\n" + +#: dselect/basecmds.cc +msgid "Search for ? " +msgstr "想搜尋什麼？" + +#: dselect/basecmds.cc +msgid "Error: " +msgstr "錯誤：" + +#: dselect/basecmds.cc +msgid "Help: " +msgstr "幫助：" + +#: dselect/basecmds.cc +msgid "Press ? for help menu, . for next topic, <space> to exit help." +msgstr "按 ? 可以彈出幫助選單，用 <space> 能進入下個主題並離開幫助畫面。" + +#: dselect/basecmds.cc +msgid "Help information is available under the following topics:" +msgstr "您可獲得有關下列主題的幫助訊息：" + +#: dselect/basecmds.cc +msgid "" +"Press a key from the list above, <space> or 'q' to exit help,\n" +" or '.' (full stop) to read each help page in turn. " +msgstr "" +"請按上面列表中的按鍵，<space> 或“q”可退出幫助界面，\n" +"或者用“.”(full stop)來依次閱讀幫助頁面。" + +#: dselect/basecmds.cc +msgid "error reading keyboard in help" +msgstr "在幫助界面讀取鍵盤輸入時出錯" + +#: dselect/baselist.cc +msgid "ioctl(TIOCGWINSZ) failed" +msgstr "ioctl(TIOCGWINSZ) 失敗" + +#: dselect/baselist.cc +msgid "doupdate in SIGWINCH handler failed" +msgstr "在 SIGWINCH 處理程式中 doupdate 失敗了" + +#: dselect/baselist.cc +msgid "failed to restore old SIGWINCH sigact" +msgstr "恢復原先的 SIGWINCH sigact 失敗" + +#: dselect/baselist.cc +msgid "failed to restore old signal mask" +msgstr "恢復原先的 signal mask 失敗" + +#: dselect/baselist.cc +msgid "failed to unblock SIGWINCH" +msgstr "無法解除阻塞 SIGWINCH 信號" + +#: dselect/baselist.cc +msgid "failed to block SIGWINCH" +msgstr "無法阻塞 SIGWINCH 信號" + +#: dselect/baselist.cc +msgid "failed to get old signal mask" +msgstr "擷取原先的 signal mask 失敗" + +#: dselect/baselist.cc +msgid "failed to get old SIGWINCH sigact" +msgstr "擷取原先的 SIGWINCH sigact 出錯" + +#: dselect/baselist.cc +msgid "failed to set new SIGWINCH sigact" +msgstr "設定新的 SIGWINCH sigact 失敗" + +#: dselect/baselist.cc +msgid "failed to allocate colour pair" +msgstr "分配顏色對失敗" + +#: dselect/baselist.cc +msgid "failed to create title window" +msgstr "建立標題視窗失敗" + +#: dselect/baselist.cc +msgid "failed to create whatinfo window" +msgstr "建立 whatinfo 視窗失敗" + +#: dselect/baselist.cc +msgid "failed to create baselist pad" +msgstr "無法建立名稱列表的小視窗" + +#: dselect/baselist.cc +msgid "failed to create heading pad" +msgstr "無法建立標題小視窗" + +#: dselect/baselist.cc +msgid "failed to create thisstate pad" +msgstr "無法建立 thisstate 小視窗" + +#: dselect/baselist.cc +msgid "failed to create info pad" +msgstr "無法建立相關訊息小視窗" + +#: dselect/baselist.cc +msgid "failed to create query window" +msgstr "建立查詢視窗失敗" + +#: dselect/baselist.cc +msgid "Keybindings" +msgstr "快速鍵" + +#: dselect/baselist.cc +#, c-format +msgid " -- %d%%, press " +msgstr " -- %d%%，請按 " + +#: dselect/baselist.cc +#, c-format +msgid "%s for more" +msgstr "%s 繼續往下讀" + +#: dselect/baselist.cc +#, c-format +msgid "%s to go back" +msgstr "%s 可以跳回原來的位置" + +#: dselect/bindings.cc +msgid "[not bound]" +msgstr "[未設定按鍵連結]" + +#: dselect/bindings.cc +#, c-format +msgid "[unk: %d]" +msgstr "[未知：%d]" + +#: dselect/bindings.cc +msgid "Scroll onwards through help/information" +msgstr "在幫助文檔或相關訊息中滾動滑鼠" + +#: dselect/bindings.cc +msgid "Scroll backwards through help/information" +msgstr "在幫助或相關訊息中捲動頁面" + +#: dselect/bindings.cc +msgid "Move up" +msgstr "上移" + +#: dselect/bindings.cc +msgid "Move down" +msgstr "下移" + +#: dselect/bindings.cc +msgid "Go to top of list" +msgstr "跳到列表頂端" + +#: dselect/bindings.cc +msgid "Go to end of list" +msgstr "跳到列表底端" + +#: dselect/bindings.cc +msgid "Request help (cycle through help screens)" +msgstr "請求幫助(循環切換幫助界面)" + +#: dselect/bindings.cc +msgid "Cycle through information displays" +msgstr "循環切換訊息顯示" + +#: dselect/bindings.cc +msgid "Redraw display" +msgstr "重畫螢幕" + +#: dselect/bindings.cc +msgid "Scroll onwards through list by 1 line" +msgstr "在列表中向前滾動一行" + +#: dselect/bindings.cc +msgid "Scroll backwards through list by 1 line" +msgstr "在列表中向後滾動一行" + +#: dselect/bindings.cc +msgid "Scroll onwards through help/information by 1 line" +msgstr "在幫助或相關訊息中向前滾動一行" + +#: dselect/bindings.cc +msgid "Scroll backwards through help/information by 1 line" +msgstr "在幫助或相關訊息中向後滾動一行" + +#: dselect/bindings.cc +msgid "Scroll onwards through list" +msgstr "在列表中向前滾動" + +#: dselect/bindings.cc +msgid "Scroll backwards through list" +msgstr "在列表中向前滾動" + +#: dselect/bindings.cc +msgid "Mark package(s) for installation" +msgstr "把套件標記為“將要安裝”" + +#: dselect/bindings.cc +msgid "Mark package(s) for deinstallation" +msgstr "把套件標記為“將要移除”" + +#: dselect/bindings.cc +msgid "Mark package(s) for deinstall and purge" +msgstr "把套件標記為移除”" + +#: dselect/bindings.cc +msgid "Make highlight more specific" +msgstr "讓高亮顯示更易識別" + +#: dselect/bindings.cc +msgid "Make highlight less specific" +msgstr "讓高亮顯示較不易識別" + +#: dselect/bindings.cc +msgid "Search for a package whose name contains a string" +msgstr "搜尋名稱含有特定字串的套件" + +#: dselect/bindings.cc +msgid "Repeat last search" +msgstr "重復上次的搜尋" + +#: dselect/bindings.cc +msgid "Swap sort order priority/section" +msgstr "調整排序的依據 - 優先等級/類別" + +#: dselect/bindings.cc +msgid "Quit, confirming, and checking dependencies" +msgstr "退出，並確認操作而且對相依問題進行復查" + +#: dselect/bindings.cc +msgid "Quit, confirming without check" +msgstr "退出，並確認操作而且不再檢查" + +#: dselect/bindings.cc +msgid "Quit, rejecting conflict/dependency suggestions" +msgstr "退出，並拒絕有關衝突和相依問題的建議" + +#: dselect/bindings.cc +msgid "Abort - quit without making changes" +msgstr "中止操作 - 不作任何更改並退出" + +#: dselect/bindings.cc +msgid "Revert to old state for all packages" +msgstr "把所有套件的狀態恢復到修改前" + +#: dselect/bindings.cc +msgid "Revert to suggested state for all packages" +msgstr "把所有套件的狀態恢復到建議值" + +#: dselect/bindings.cc +msgid "Revert to directly requested state for all packages" +msgstr "把所有套件的狀態恢復到所要求的值" + +#: dselect/bindings.cc +msgid "Revert to currently installed state for all packages" +msgstr "把所有套件的狀態恢復到目前安裝的值" + +#: dselect/bindings.cc +msgid "Select currently-highlighted access method" +msgstr "選擇目前高亮顯示的存取方式" + +#: dselect/bindings.cc +msgid "Quit without changing selected access method" +msgstr "退出程序，而且不修改所選的存取方式" + +#: dselect/helpmsgs.cc +msgid "Keystrokes" +msgstr "按鍵操作" + +#: dselect/helpmsgs.cc +#, fuzzy +#| msgid "" +#| "Motion keys: Next/Previous, Top/End, Up/Down, Backwards/Forwards:\n" +#| " j, Down-arrow k, Up-arrow move highlight\n" +#| " N, Page-down, Space P, Page-up, Backspace scroll list by 1 page\n" +#| " ^n ^p scroll list by 1 line\n" +#| " t, Home e, End jump to top/end of list\n" +#| " u d scroll info by 1 page\n" +#| " ^u ^d scroll info by 1 line\n" +#| " B, Left-arrow F, Right-arrow pan display by 1/3 " +#| "screen\n" +#| " ^b ^f pan display by 1 " +#| "character\n" +#| "\n" +#| "Mark packages for later processing:\n" +#| " +, Insert install or upgrade =, H hold in present state\n" +#| " -, Delete remove :, G unhold: upgrade or leave " +#| "uninstalled\n" +#| " _ remove & purge config\n" +#| " Miscellaneous:\n" +#| "Quit, exit, overwrite (note capitals!): ?, F1 request help (also " +#| "Help)\n" +#| " Return Confirm, quit (check dependencies) i, I toggle/cycle info " +#| "displays\n" +#| " Q Confirm, quit (override dep.s) o, O cycle through sort " +#| "options\n" +#| " X, Esc eXit, abandoning any changes made v, V change status display " +#| "opts\n" +#| " R Revert to state before this list ^l redraw display\n" +#| " U set all to sUggested state / search (Return to " +#| "cancel)\n" +#| " D set all to Directly requested state n, \\ repeat last search\n" +msgid "" +"Motion keys: Next/Previous, Top/End, Up/Down, Backwards/Forwards:\n" +" j, Down-arrow k, Up-arrow move highlight\n" +" N, Page-down, Space P, Page-up, Backspace scroll list by 1 page\n" +" ^n ^p scroll list by 1 line\n" +" t, Home e, End jump to top/end of list\n" +" u d scroll info by 1 page\n" +" ^u ^d scroll info by 1 line\n" +" B, Left-arrow F, Right-arrow pan display by 1/3 screen\n" +" ^b ^f pan display by 1 character\n" +"\n" +"Mark packages for later processing:\n" +" +, Insert install or upgrade =, H hold in present state\n" +" -, Delete remove :, G unhold: upgrade or leave " +"uninstalled\n" +" _ remove & purge config\n" +" Miscellaneous:\n" +"Quit, exit, overwrite (note capitals!): ?, F1 request help (also " +"Help)\n" +" Return Confirm, quit (check dependencies) i, I toggle/cycle info " +"displays\n" +" Q Confirm, quit (override dep.s) o, O cycle through sort " +"options\n" +" X, Esc eXit, abandoning any changes made v, A, V change status display " +"opts\n" +" R Revert to state before this list ^l redraw display\n" +" U set all to sUggested state / search (Return to " +"cancel)\n" +" D set all to Directly requested state n, \\ repeat last search\n" +msgstr "" +"移動按鍵：下一個/前一個，頂端/底端，上移/下移，後移/前移：\n" +" j，下箭頭 k，上箭頭 移動高亮顯示所在的地方\n" +" N，Page-down，空格 P，Page-up，Backspace 讓列表滾動一頁\n" +" ^n ^p 讓列表滾動一行\n" +" t，Home e，End 跳到列表的頂端/底端\n" +" u d 讓相關訊息滾動一頁\n" +" ^u ^d 讓相關訊息滾動一行\n" +" B，左箭頭 F，右箭頭 讓顯示內容左右平移 1/3 螢幕寬" +"度\n" +" ^b ^f 讓顯示內容左右平移一個字元寬" +"度\n" +"\n" +"為套件作上標記，待之後再作處理：\n" +" +，Insert 安裝或者升級 =，H 令其保持當前狀態\n" +" - ，Delete 刪除 :, G 取消保持：升級或者仍然不安裝\n" +" _ 刪除並清除設定\n" +" 其它：\n" +"退出，覆寫狀態(注意，都是大寫！)： ?, F1 請求幫助(Help)\n" +" Enter 確認並退出(檢查相依性) i, I 切換或滾動相關訊息的顯" +"示\n" +" Q 確認並退出(忽略相依問題) o, O 滾動排序的各個選項\n" +" X, Esc 退出程序，把之前的改動作廢 v, V 修改狀態顯示的選項\n" +" R 把所有套件的狀態恢復到修改前 ^l 重畫螢幕\n" +" U 把所有套件的狀態改成建議值 / 搜尋 (按Enter取消搜" +"索)\n" +" D 把所有套件的狀態改成到所要求的值 \\ 重復上次的搜尋\n" + +#: dselect/helpmsgs.cc +msgid "Introduction to package selections" +msgstr "套件選擇界面簡介" + +#: dselect/helpmsgs.cc +msgid "" +"Welcome to dselect's main package listing.\n" +"\n" +"You will be presented with a list of packages which are installed or " +"available\n" +"for installation. You can navigate around the list using the cursor keys,\n" +"mark packages for installation (using '+') or deinstallation (using '-').\n" +"Packages can be marked either singly or in groups; initially you will see " +"that\n" +"the line 'All packages' is selected. '+', '-' and so on will affect all " +"the\n" +"packages described by the highlighted line.\n" +"\n" +"Some of your choices will cause conflicts or dependency problems; you will " +"be\n" +"given a sub-list of the relevant packages, so that you can solve the " +"problems.\n" +"\n" +"You should read the list of keys and the explanations of the display.\n" +"Much on-line help is available, please make use of it - press '?' at\n" +"any time for help.\n" +"\n" +"When you have finished selecting packages, press <enter> to confirm " +"changes,\n" +"or 'X' to quit without saving changes. A final check on conflicts and\n" +"dependencies will be done - here too you may see a sublist.\n" +"\n" +"Press <space> to leave help and enter the list now.\n" +msgstr "" +"歡迎來到 dselect 的套件主列表界面。\n" +"\n" +"展現在您面前的是已經安裝的或可以安裝的套件列表。\n" +"想要安裝時，可以使用方向鍵瀏覽這個列表，\n" +"將安裝的套件作上記號(用 `+')，也可以將想要移除\n" +"的套件作記號(用“`-')。\n" +"作記號時，不僅可以對單個套件作記號，還可以為成組\n" +"的套件作記號。剛開始時您會看到“所有套件”這一行被\n" +"選中。那麼用`+'和`-'等鍵就可以操控被高亮顯示的行\n" +"所指的所有套件。\n" +"\n" +"您作的一些選擇可能會導致套件間的衝突或相依問題，\n" +"這時軟體會把一份有問題的相關軟體列表交給你，這樣，\n" +"您就能解決這個問題了。\n" +"\n" +"您必須閱讀這些列出的按鍵以及展開說明。\n" +"在您尋求幫助時只要按下`?'就能取得許多線上說明。\n" +"\n" +"一旦您選完套件，請按 <enter> 鍵來確認剛才的修改，\n" +"或者用`X'退出同時不儲存任何改變。最後作一次衝突和\n" +"相依性的檢查 - 您在這裡可能還會看一次相關軟體列表。\n" +"\n" +"現在您可以按 <enter> 鍵離開幫助界面，進入列表界面了。\n" + +#: dselect/helpmsgs.cc +msgid "Introduction to read-only package list browser" +msgstr "唯讀的套件列表瀏覽界面簡介" + +#: dselect/helpmsgs.cc +msgid "" +"Welcome to dselect's main package listing.\n" +"\n" +"You will be presented with a list of packages which are installed or " +"available\n" +"for installation. Since you do not have the privilege necessary to update\n" +"package states, you are in a read-only mode. You can navigate around the\n" +"list using the cursor keys (please see the 'Keystrokes' help screen), " +"observe\n" +"the status of the packages and read information about them.\n" +"\n" +"You should read the list of keys and the explanations of the display.\n" +"Much on-line help is available, please make use of it - press '?' at\n" +"any time for help.\n" +"\n" +"When you have finished browsing, press 'Q' or <enter> to quit.\n" +"\n" +"Press <space> to leave help and enter the list now.\n" +msgstr "" +"歡迎來到 dselect 的套件主列表界面。\n" +"\n" +"展現在您面前的是已經安裝的或可以安裝的套件列表。\n" +"由於您沒有權限修改套件的狀態，就只能以唯讀模式操作了。\n" +"您可以使用方向鍵在本列表中(請參考幫助界面中的“按鍵操作”一節)\n" +"移動，還可以查看套件的狀態並獲知套件的相關訊息。\n" +"\n" +"您應當看看按鍵的列表，以及有關螢幕上顯示訊息的解釋。\n" +"您可以閱讀許多線上的幫助文檔，無論何時只要按“?”就可\n" +"調閱它們。\n" +"\n" +"一旦您看完，請按“Q”或者 <enter> 鍵來退出軟體。\n" +"\n" +"現在您可以通過按 <enter> 鍵離開幫助界面，進入列表界面了。\n" + +#: dselect/helpmsgs.cc +msgid "Introduction to conflict/dependency resolution sub-list" +msgstr "用於解決衝突/相依問題的子列表的簡介" + +#: dselect/helpmsgs.cc +msgid "" +"Dependency/conflict resolution - introduction.\n" +"\n" +"One or more of your choices have raised a conflict or dependency problem -\n" +"some packages should only be installed in conjunction with certain others, " +"and\n" +"some combinations of packages may not be installed together.\n" +"\n" +"You will see a sub-list containing the packages involved. The bottom half " +"of\n" +"the display shows relevant conflicts and dependencies; use 'i' to cycle " +"between\n" +"that, the package descriptions and the internal control information.\n" +"\n" +"A set of 'suggested' packages has been calculated, and the initial markings " +"in\n" +"this sub-list have been set to match those, so you can just hit Return to\n" +"accept the suggestions if you wish. You may abort the change(s) which " +"caused\n" +"the problem(s), and go back to the main list, by pressing capital 'X'.\n" +"\n" +"You can also move around the list and change the markings so that they are " +"more\n" +"like what you want, and you can 'reject' my suggestions by using the " +"capital\n" +"'D' or 'R' keys (see the keybindings help screen). You can use capital 'Q' " +"to\n" +"force me to accept the situation currently displayed, in case you want to\n" +"override a recommendation or think that the program is mistaken.\n" +"\n" +"Press <space> to leave help and enter the sub-list; remember: press '?' for " +"help.\n" +msgstr "" +"用於解決衝突/相依問題的子列表的簡介。\n" +"\n" +"您作的選擇中有些引起了衝突或相依問題，即，\n" +"有些套件必須與某些其它套件一同安裝，\n" +"而有的套件的特定組合是不能同時安裝的。\n" +"\n" +"您將會見到一個子列表，它囊括了波及到的\n" +"套件。顯示內容的下半部分會告訴您相關\n" +"的衝突和相依關系。請使用“i”來瀏覽套件\n" +"的簡介和內部控制訊息。\n" +"\n" +"有一組被“建議”的套件已被統計出來了，\n" +"而且這個子列表中的對應套件的狀態也被標記成了“建議”的狀態。這樣，如果您願意的" +"話，\n" +"只需按一下enter來接受軟體的建議。\n" +"您還可以按大寫的“X”來取消導致問題的更動，並回到主列表界面。\n" +"\n" +"您也可以按照自己的需求修改列表中套件的狀態。\n" +"同時，您也可以按大寫的“D”或“R”\n" +"鍵(參考快速鍵的幫助界面)，來“拒絕”我提出的建議。\n" +"當您希望忽略我的建議或是認為本軟體出錯時，\n" +"您還可以按大寫的“Q”來強制接受當前顯示的設定。\n" +"\n" +"請按<enter>離開幫助界面，進入子列表。\n" +"需要幫助時，按“?”鍵。\n" + +#: dselect/helpmsgs.cc +msgid "Display, part 1: package listing and status chars" +msgstr "顯示部位 1：套件列表及狀態簡寫" + +#: dselect/helpmsgs.cc +msgid "" +"The top half of the screen shows a list of packages. For each package you " +"see\n" +"four columns for its current status on the system and mark. In terse mode " +"(use\n" +"'v' to toggle verbose display) these are single characters, from left to " +"right:\n" +"\n" +" Error flag: Space - no error (but package may be in broken state - see " +"below)\n" +" 'R' - serious error during installation, needs " +"reinstallation;\n" +" Installed state: Space - not installed;\n" +" '*' - installed;\n" +" '-' - not installed but config files remain;\n" +" packages in these { 'U' - unpacked but not yet configured;\n" +" states are not { 'C' - half-configured (an error happened);\n" +" (quite) properly { 'I' - half-installed (an error happened);\n" +" installed { 'W','t' - triggers are awaited resp. pending.\n" +" Old mark: what was requested for this package before presenting this list;\n" +" Mark: what is requested for this package:\n" +" '*': marked for installation or upgrade;\n" +" '-': marked for removal, but any configuration files will remain;\n" +" '=': on hold: package will not be processed at all;\n" +" '_': marked for purge completely - even remove configuration;\n" +" 'n': package is new and has yet to be marked for install/remove/&c.\n" +"\n" +"Also displayed are each package's Priority, Section, name, installed and\n" +"available version numbers (shift-V to display/hide) and summary " +"description.\n" +msgstr "" +"螢幕的上半部分顯示的是套件的列表。對每個套件來說，\n" +"都有四列代號表示該套件在系統中的狀態以及現在的標記。在簡略模式裡(可用\n" +"“v”來切換到詳盡模式)它們都是單個字母，從左到右分別是：\n" +"\n" +"錯誤旗標：空白，即沒有錯誤(但是套件可能有故障，見下)\n" +" “R”， 即在安裝過程遭遇了嚴重錯誤，需要重新安裝﹔\n" +"安裝狀態：空白，即沒有安裝﹔\n" +" “*”， 即已安裝﹔\n" +" “-”， 即沒有安裝，但是殘留其設定檔案﹔\n" +" 處於這些狀態 { “U”，即已解壓縮但還未進行設定﹔\n" +" 的套件 { “C”，即不完全設定(其間有錯誤發生)﹔\n" +" 都是有故障的 { “I”，即部分安裝(其間有錯誤發生)；\n" +" 已安裝 { “W”,“t” ，等待觸發。等待中。\n" +" 原有標記：列表顯示出之前的套件被要求設定的狀態﹔\n" +"當前標記：現在套件被要求設定的狀態：\n" +" “*”：將其標記為安裝或升級﹔\n" +" “-”：將其標記為刪除，但是將保留它的設定檔案﹔\n" +" “=”：維持原狀：套件將不動分毫﹔\n" +" “_”：將其標記為完全清除，連同設定一起刪除﹔\n" +" “n”：套件是新的，尚未標記過。\n" +"\n" +"另外界面上還顯示有套件的優先級、所屬類別、名稱、已安裝\n" +"的版本號和當前可用的版本號（使用 shift-v 可以開啟或關閉其\n" +"顯示)，以及簡要的介紹。\n" + +#: dselect/helpmsgs.cc +msgid "Display, part 2: list highlight; information display" +msgstr "顯示部位 2：列表高亮顯示部分﹔相關訊息的顯示" + +#: dselect/helpmsgs.cc +msgid "" +"* Highlight: One line in the package list will be highlighted. It " +"indicates\n" +" which package(s) will be affected by presses of '+', '-' and '_'.\n" +"\n" +"* The dividing line in the middle of the screen shows a brief explanation " +"of\n" +" the status of the currently-highlighted package, or a description of " +"which\n" +" group is highlighted if a group line is. If you don't understand the\n" +" meaning of some of the status characters displayed, go to the relevant\n" +" package and look at this divider line, or use the 'v' key for a verbose\n" +" display (press 'v' again to go back to the terse display).\n" +"\n" +"* The bottom of the screen shows more information about the\n" +" currently-highlighted package (if there is only one).\n" +"\n" +" It can show an extended description of the package, the internal package\n" +" control details (either for the installed or available version of the\n" +" package), or information about conflicts and dependencies involving the\n" +" current package (in conflict/dependency resolution sublists).\n" +"\n" +" Use the 'i' key to cycle through the displays, and 'I' to hide the\n" +" information display or expand it to use almost all of the screen.\n" +msgstr "" +"* 高亮：套件列表中被高亮顯示的那一行。它所在的行的\n" +" 套件將會被“+”、“-”和“_”的按鍵操控。\n" +"\n" +"* 在螢幕中間的分隔條概括了當前高亮的(一組)套件的狀態。\n" +" 如果您不了解左側狀態代號的意思，請移動到相應的套件，\n" +" 再查看分隔條，或者使用“v”鍵來調閱較詳細的顯示(再按一次\n" +" 就可以回到簡略的顯示模式)。\n" +"\n" +"* 螢幕底部顯示的是當前高亮的套件(如果只有一個)的更多\n" +" 訊息。\n" +" \n" +" 它會顯示關於該套件的補充訊息、套件內部的控制細節\n" +" (不管是已經安裝的還是尚未安裝的版本)、若是與當前套件\n" +" (出現在衝突/相依問題解決辦法子列表)有關的衝突和相依問題。\n" +"\n" +" 您可以用“i”鍵在這些顯示內容中來回切換，用“I”來關閉相關訊息\n" +" 的顯示，或者擴大它在螢幕中所占的篇幅直到幾乎完全佔據螢幕。\n" + +#: dselect/helpmsgs.cc +msgid "Introduction to method selection display" +msgstr "安裝方式選擇界面的簡介" + +#: dselect/helpmsgs.cc +msgid "" +"dselect and dpkg can do automatic installation, loading the package files to " +"be\n" +"installed from one of a number of different possible places.\n" +"\n" +"This list allows you to select one of these installation methods.\n" +"\n" +"Move the highlight to the method you wish to use, and hit Enter. You will " +"then\n" +"be prompted for the information required to do the installation.\n" +"\n" +"As you move the highlight a description of each method, where available, is\n" +"displayed in the bottom half of the screen.\n" +"\n" +"If you wish to quit without changing anything use the 'x' key while in the " +"list\n" +"of installation methods.\n" +"\n" +"A full list of keystrokes is available by pressing 'k' now, or from the " +"help\n" +"menu reachable by pressing '?'.\n" +msgstr "" +"dselect 和 dpkg 能夠實現自動化的安裝，它們可以從多個不同的位置取回\n" +"要安裝的套件檔案。\n" +"\n" +"本列表可以讓您從這些安裝方式中選擇一個。\n" +"\n" +"請移動高亮光棒到您希望使用的安裝方式，再按enter。然後軟體會提示您輸入\n" +"這種安裝方式所必須的一些相關訊息。\n" +"\n" +"如果您想要退出程序，而且不做任何變動，那麼請在安裝方式列表的界面中\n" +"使用“x”鍵。\n" +"\n" +"現在按“k”鍵就能見到按鍵操作的完整列表，也可以在幫助選單中按“k”鍵。\n" +"按“?”就能呼出幫助選單。\n" + +#: dselect/helpmsgs.cc +msgid "Keystrokes for method selection" +msgstr "選擇安裝方式的按鍵操作" + +#: dselect/helpmsgs.cc +msgid "" +"Motion keys: Next/Previous, Top/End, Up/Down, Backwards/Forwards:\n" +" j, Down-arrow k, Up-arrow move highlight\n" +" N, Page-down, Space P, Page-up, Backspace scroll list by 1 page\n" +" ^n ^p scroll list by 1 line\n" +" t, Home e, End jump to top/end of list\n" +" u d scroll info by 1 page\n" +" ^u ^d scroll info by 1 line\n" +" B, Left-arrow F, Right-arrow pan display by 1/3 screen\n" +" ^b ^f pan display by 1 character\n" +"(These are the same motion keys as in the package list display.)\n" +"\n" +"Quit:\n" +" Return, Enter select this method and go to its configuration dialogue\n" +" x, X exit without changing or setting up the installation " +"method\n" +"\n" +"Miscellaneous:\n" +" ?, Help, F1 request help\n" +" ^l redraw display\n" +" / search (just return to cancel)\n" +" \\ repeat last search\n" +msgstr "" +"移動按鍵：下一個/前一個，頂端/底端，上移/下移，後移/前移：\n" +" j，下箭頭 k，上箭頭 移動高亮所在的地方\n" +" N，Page-down，空格 P，Page-up，Backspace 讓列表滾動一頁\n" +" ^n ^p 讓列表滾動一行\n" +" t，Home e，End 跳到列表的頂端/底端\n" +" u d 讓相關訊息滾動一頁\n" +" ^u ^d 讓相關訊息滾動一行\n" +" B，左箭頭 F，右箭頭 讓顯示內容左右平移 1/3 的螢幕" +"寬度\n" +" ^b ^f 讓顯示內容左右平移一個字元寬" +"度\n" +"(在套件列表界面也使用同樣的按鍵設定。)\n" +"\n" +"退出：\n" +" enter 選中該安裝方式，並進入其設定界面\n" +" x，X 退出，而且不對安裝方式作任何更改或設定\n" +"\n" +"其它：\n" +" ?, Help, F1 請求幫助\n" +" ^l 重畫螢幕\n" +" / 進行搜尋(按enter取消搜尋)\n" +" \\ 重復上次的搜尋\n" + +#: dselect/main.cc +msgid "Type dselect --help for help." +msgstr "輸入 dselect --help 就可以閱讀幫助訊息。" + +#: dselect/main.cc +msgid "a" +msgstr "a" + +#: dselect/main.cc +msgid "[A]ccess" +msgstr "來源[A]" + +#: dselect/main.cc +msgid "Choose the access method to use." +msgstr "選擇所使用的安裝來源。" + +#: dselect/main.cc +msgid "u" +msgstr "u" + +#: dselect/main.cc +msgid "[U]pdate" +msgstr "更新[U]" + +#: dselect/main.cc +msgid "Update list of available packages, if possible." +msgstr "如果可能的話，更新可用的套件列表。" + +#: dselect/main.cc +msgid "s" +msgstr "s" + +#: dselect/main.cc +msgid "[S]elect" +msgstr "選擇[S]" + +#: dselect/main.cc +msgid "Request which packages you want on your system." +msgstr "對系統中安裝的套件作取捨。" + +#: dselect/main.cc +msgid "i" +msgstr "i" + +#: dselect/main.cc +msgid "[I]nstall" +msgstr "安裝[I]" + +#: dselect/main.cc +msgid "Install and upgrade wanted packages." +msgstr "安裝並升級之前指定的套件。" + +#: dselect/main.cc +msgid "c" +msgstr "c" + +#: dselect/main.cc +msgid "[C]onfig" +msgstr "設定[C]" + +#: dselect/main.cc +msgid "Configure any packages that are unconfigured." +msgstr "對所有尚未設定的套件進行設定" + +#: dselect/main.cc +msgid "r" +msgstr "r" + +#: dselect/main.cc +msgid "[R]emove" +msgstr "刪除[R]" + +#: dselect/main.cc +msgid "Remove unwanted software." +msgstr "刪除不需要的套件" + +#: dselect/main.cc +msgid "q" +msgstr "q" + +#: dselect/main.cc +msgid "[Q]uit" +msgstr "退出[Q]" + +#: dselect/main.cc +msgid "Quit dselect." +msgstr "退出 dselect 程序" + +#: dselect/main.cc +msgid "menu" +msgstr "選單" + +#: dselect/main.cc +#, c-format +msgid "Debian '%s' package handling frontend version %s.\n" +msgstr "Debian “%s” 套件操作前端程式版本%s。\n" + +#: dselect/main.cc +msgid "" +"This is free software; see the GNU General Public License version 2 or\n" +"later for copying conditions. There is NO warranty.\n" +msgstr "" +"這是自由軟體﹔請參閱 GNU General Public License\n" +"第二或更新的版本。該軟體【不】提供任何擔保。\n" + +#: dselect/main.cc +msgid "<standard output>" +msgstr "<標準輸出>" + +#: dselect/main.cc +#, fuzzy, c-format +#| msgid "" +#| "Usage: %s [<option> ...] [<action> ...]\n" +#| "\n" +msgid "" +"Usage: %s [<option>...] [<command>...]\n" +"\n" +msgstr "" +"用法：%s [<選項> ...][<選項> ...]\n" +"\n" + +#: dselect/main.cc +#, c-format +msgid "Commands:\n" +msgstr "" + +#: dselect/main.cc +#, fuzzy, c-format +#| msgid "" +#| "Options:\n" +#| " --admindir <directory> Use <directory> instead of %s.\n" +#| " --expert Turn on expert mode.\n" +#| " --debug <file> | -D<file> Turn on debugging, sending output to " +#| "<file>.\n" +#| " --colour | --color screenpart:[foreground],[background][:attr[+attr" +#| "+...]]\n" +#| " Configure screen colours.\n" +#| "\n" +msgid "" +"Options:\n" +" --admindir <directory> Use <directory> instead of %s.\n" +" --expert Turn on expert mode.\n" +" -D, --debug <file> Turn on debugging, send output to " +"<file>.\n" +" --color <color-spec> Configure screen colors.\n" +" --colour <color-spec> Ditto.\n" +msgstr "" +"選項：\n" +" --admindir <目錄名> 以 <目錄名> 取代 %s。\n" +" --expert 開啟專家模式。\n" +" --debug <檔案> | -D<檔案> 開啟偵錯，將訊息導至 <檔案>。\n" +" --colour | --color screenpart:[foreground],[backgroud][:attr[+attr+...]]\n" +" 設定螢幕顏色。\n" +"\n" + +#: dselect/main.cc +#, fuzzy, c-format +#| msgid "" +#| " --help Show this help message.\n" +#| " --version Show the version.\n" +#| "\n" +msgid "" +" -?, --help Show this help message.\n" +" --version Show the version.\n" +"\n" +msgstr "" +" --help 顯示求助訊息。\n" +" --version 顯示版本號。\n" +"\n" + +#: dselect/main.cc +#, c-format +msgid "" +"<color-spec> is <screen-part>:[<foreground>],[<background>][:" +"<attr>[+<attr>]...]\n" +msgstr "" + +#: dselect/main.cc +#, fuzzy, c-format +#| msgid "Screenparts:\n" +msgid "<screen-part> is:" +msgstr "顯示部分：\n" + +#: dselect/main.cc +#, c-format +msgid "<color> is:" +msgstr "" + +#: dselect/main.cc +#, c-format +msgid "<attr> is:" +msgstr "" + +#: dselect/main.cc +#, c-format +msgid "couldn't open debug file '%.255s'\n" +msgstr "無法打開偵錯檔案“%.255s”\n" + +#: dselect/main.cc +#, c-format +msgid "invalid %s '%s'" +msgstr "無效的 %s “%s”" + +#: dselect/main.cc +msgid "screen part" +msgstr "顯示哪一部分" + +#: dselect/main.cc +msgid "null colour specification" +msgstr "未指定顏色" + +#: dselect/main.cc +msgid "colour" +msgstr "顏色" + +#: dselect/main.cc +msgid "colour attribute" +msgstr "顏色屬性" + +#: dselect/main.cc +msgid "Terminal does not appear to support cursor addressing.\n" +msgstr "終端機不支持游標的定位。\n" + +#: dselect/main.cc +msgid "Terminal does not appear to support highlighting.\n" +msgstr "終端機不支持高亮顯示。\n" + +#: dselect/main.cc +#, c-format +msgid "" +"Set your TERM variable correctly, use a better terminal,\n" +"or make do with the per-package management tool %s.\n" +msgstr "" +"請正確設定您的 TERM 變量，用一個更合適的終端機類型，\n" +"或者改用針對單一套件的套裝管理工具 %s。\n" + +#: dselect/main.cc +msgid "terminal lacks necessary features, giving up" +msgstr "由於終端機缺乏必要的特色，只得中止操作" + +#: dselect/main.cc +msgid "" +"\n" +"\n" +"Move around with ^P and ^N, cursor keys, initial letters, or digits;\n" +"Press <enter> to confirm selection. ^L redraws screen.\n" +"\n" +msgstr "" +"\n" +"\n" +"可以用 ^P 和 ^N、方向鍵、初始字母或者數字鍵來移動游標﹔\n" +"按 <enter> 來確認。 用 ^L 來重繪螢幕。\n" +"\n" + +#: dselect/main.cc +msgid "" +"Copyright (C) 1994-1996 Ian Jackson.\n" +"Copyright (C) 2000,2001 Wichert Akkerman.\n" +msgstr "" +"Copyright (C) 1994-1996 Ian Jackson.\n" +"Copyright (C) 2000,2001 Wichert Akkerman.\n" + +#: dselect/main.cc +msgid "" +"\n" +"\n" +"Read-only access: only preview of selections is available!" +msgstr "" +"\n" +"\n" +"唯讀存取：僅僅可以預覽被選中的項目！" + +#: dselect/main.cc +msgid "failed to getch in main menu" +msgstr "在主選單中 getch 失敗" + +#: dselect/main.cc +#, c-format +msgid "unknown action string '%.50s'" +msgstr "不能識別的操作字串“%.50s”" + +#: dselect/methlist.cc +msgid "Abbrev." +msgstr "縮寫" + +#: dselect/methlist.cc dselect/pkgdisplay.cc dselect/pkginfo.cc +msgid "Description" +msgstr "簡介" + +#: dselect/methlist.cc +msgid "dselect - list of access methods" +msgstr "dselect - 存取方式的列表" + +#: dselect/methlist.cc +#, c-format +msgid "Access method '%s'." +msgstr "存取方式“%s”。" + +#: dselect/methlist.cc dselect/pkglist.cc +msgid "doupdate failed" +msgstr "doupdate 失敗" + +#: dselect/methlist.cc dselect/pkglist.cc +msgid "getch failed" +msgstr "getch 失敗" + +#: dselect/methlist.cc +msgid "Explanation" +msgstr "說明" + +#: dselect/methlist.cc +msgid "No explanation available." +msgstr "沒有發現相關說明。" + +#: dselect/method.cc +msgid "" +"\n" +"Press <enter> to continue." +msgstr "" +"\n" +"按 <enter> 繼續。" + +#: dselect/method.cc +msgid "cannot unlock access method area" +msgstr "" + +#: dselect/method.cc +#, fuzzy +#| msgid " does not appear to be available\n" +msgid "no access methods are available" +msgstr " 看上去應該不可用\n" + +#: dselect/method.cc +msgid "requested operation requires superuser privilege" +msgstr "" + +#: dselect/method.cc +#, fuzzy +#| msgid "Choose the access method to use." +msgid "cannot open or create access method lockfile" +msgstr "選擇所使用的安裝來源。" + +#: dselect/method.cc +msgid "the access method area is already locked" +msgstr "" + +#: dselect/method.cc +#, fuzzy +#| msgid "dselect - list of access methods" +msgid "cannot lock access method area" +msgstr "dselect - 存取方式的列表" + +#: dselect/method.cc +#, c-format +msgid "Press <enter> to continue.\n" +msgstr "請按 <enter> 繼續。\n" + +#: dselect/method.cc +msgid "<standard error>" +msgstr "<寫標準輸出時出錯>" + +#: dselect/method.cc +msgid "error reading acknowledgement of program failure message" +msgstr "讀取程序的錯誤提示時出錯" + +#: dselect/method.cc +msgid "no access method is selected or configured" +msgstr "" + +#: dselect/method.cc +msgid "update available list script" +msgstr "更新套件列表的script" + +#: dselect/method.cc +msgid "installation script" +msgstr "安裝script套件" + +#: dselect/method.cc +msgid "query/setup script" +msgstr "查詢/設定 script " + +#: dselect/methparse.cc +#, c-format +msgid "syntax error in method options file '%.250s' -- %s" +msgstr "安裝方式的選項檔案“%.250s”中有語法錯誤 -- %s" + +#: dselect/methparse.cc +#, c-format +msgid "error reading options file '%.250s'" +msgstr "讀取安裝方式的選項檔案“%.250s”時出錯" + +#: dselect/methparse.cc +#, c-format +msgid "unable to read '%.250s' directory for reading methods" +msgstr "無法讀取“%.250s”目錄中關於安裝方式的訊息" + +#: dselect/methparse.cc +#, c-format +msgid "method '%.250s' has name that is too long (%d > %d characters)" +msgstr "安裝方式“%.250s”的名字過長(%d > %d 個字元)" + +#: dselect/methparse.cc +#, c-format +msgid "unable to access method script '%.250s'" +msgstr "無法取得 method script“%.250s”" + +#: dselect/methparse.cc +#, c-format +msgid "unable to read method options file '%.250s'" +msgstr "無法讀取 method script“%.250s”" + +#: dselect/methparse.cc +msgid "non-digit where digit wanted" +msgstr "在本該有數字的地方沒有發現數字" + +#: dselect/methparse.cc +#, fuzzy +#| msgid "EOF in index string" +msgid "end of file in index string" +msgstr "在索引字串中發現了 EOF" + +#: dselect/methparse.cc +msgid "index string too long" +msgstr "索引字串過長" + +#: dselect/methparse.cc +msgid "newline before option name start" +msgstr "在選項名稱開始前就發現了換行符號" + +#: dselect/methparse.cc +#, fuzzy +#| msgid "newline before option name start" +msgid "end of file before option name start" +msgstr "在選項名稱開始前就發現了換行符號" + +#: dselect/methparse.cc +msgid "nonalpha where option name start wanted" +msgstr "在本該是選項名開頭的地方不是字母" + +#: dselect/methparse.cc +msgid "non-alphanum in option name" +msgstr "在選項名中發現了既不是字母也不是數字的字元" + +#: dselect/methparse.cc +#, fuzzy +#| msgid "EOF in option name" +msgid "end of file in option name" +msgstr "在選項名中發現了 EOF" + +#: dselect/methparse.cc +msgid "newline before summary" +msgstr "在概述前發現了換行符號" + +#: dselect/methparse.cc +#, fuzzy +#| msgid "newline before summary" +msgid "end of file before summary" +msgstr "在概述前發現了換行符號" + +#: dselect/methparse.cc +#, fuzzy +#| msgid "EOF in summary - missing newline" +msgid "end of file in summary - missing newline" +msgstr "在概述中發現了 EOF - 本該是換行符號的" + +#: dselect/methparse.cc +#, c-format +msgid "unable to open option description file '%.250s'" +msgstr "無法打開選項說明檔案“%.250s”" + +#: dselect/methparse.cc +#, c-format +msgid "unable to stat option description file '%.250s'" +msgstr "無法 stat 選項說明檔案“%.250s”" + +#: dselect/methparse.cc +#, c-format +msgid "failed to read option description file '%.250s'" +msgstr "讀取選項說明檔“%.250s”失敗" + +#: dselect/methparse.cc +#, c-format +msgid "error during read of option description file '%.250s'" +msgstr "讀取選項說明檔“%.250s”時出錯" + +#: dselect/methparse.cc +#, c-format +msgid "error during read of method options file '%.250s'" +msgstr "讀取安裝方式的選項檔案“%.250s”時出錯" + +#: dselect/methparse.cc +#, c-format +msgid "unable to open current option file '%.250s'" +msgstr "無法打開目前的選項檔案“%.250s”" + +#: dselect/methparse.cc +#, c-format +msgid "unable to write new option to '%.250s'" +msgstr "無法寫入新的選項檔案“%.250s”" + +#: dselect/pkgdisplay.cc +msgid "new package" +msgstr "新套件" + +#: dselect/pkgdisplay.cc +msgid "install" +msgstr "安裝" + +#: dselect/pkgdisplay.cc +msgid "hold" +msgstr "保持" + +#: dselect/pkgdisplay.cc +msgid "remove" +msgstr "刪除" + +#: dselect/pkgdisplay.cc +msgid "purge" +msgstr "清除" + +#. TRANSLATORS: The space is a trick to work around gettext which uses +#. * the empty string to store information about the translation. DO NOT +#. * CHANGE THAT IN A TRANSLATION! The code really relies on that being +#. * a single space. +#: dselect/pkgdisplay.cc +msgid " " +msgstr " " + +#: dselect/pkgdisplay.cc +msgid "REINSTALL" +msgstr "【重新安裝】" + +#: dselect/pkgdisplay.cc +msgid "not installed" +msgstr "沒有安裝" + +#: dselect/pkgdisplay.cc +msgid "removed (configs remain)" +msgstr "刪除(殘存設定檔案)" + +#: dselect/pkgdisplay.cc +msgid "half installed" +msgstr "已部分安裝" + +#: dselect/pkgdisplay.cc +msgid "unpacked (not set up)" +msgstr "已解壓縮(尚未設定)" + +#: dselect/pkgdisplay.cc +msgid "half configured (config failed)" +msgstr "half configured (config failed)" + +#: dselect/pkgdisplay.cc +msgid "awaiting trigger processing" +msgstr "等待觸發中" + +#: dselect/pkgdisplay.cc +msgid "triggered" +msgstr "觸發" + +#: dselect/pkgdisplay.cc +msgid "installed" +msgstr "已安裝完畢" + +#: dselect/pkgdisplay.cc +msgid "Required" +msgstr "需要" + +#: dselect/pkgdisplay.cc +msgid "Important" +msgstr "重要" + +#: dselect/pkgdisplay.cc +msgid "Standard" +msgstr "標準" + +#: dselect/pkgdisplay.cc +msgid "Optional" +msgstr "可選擇" + +#: dselect/pkgdisplay.cc +msgid "Extra" +msgstr "額外" + +#: dselect/pkgdisplay.cc +msgid "Unclassified" +msgstr "未歸類" + +#: dselect/pkgdisplay.cc +msgid "suggests" +msgstr "建議" + +#: dselect/pkgdisplay.cc +msgid "recommends" +msgstr "推薦" + +#: dselect/pkgdisplay.cc +msgid "depends on" +msgstr "相依於" + +#: dselect/pkgdisplay.cc +msgid "pre-depends on" +msgstr "預相依於" + +#: dselect/pkgdisplay.cc +msgid "breaks" +msgstr "取消" + +#: dselect/pkgdisplay.cc +msgid "conflicts with" +msgstr "與之衝突" + +#: dselect/pkgdisplay.cc +msgid "provides" +msgstr "提供" + +#: dselect/pkgdisplay.cc +msgid "replaces" +msgstr "替換" + +#: dselect/pkgdisplay.cc +msgid "enhances" +msgstr "有助於" + +#: dselect/pkgdisplay.cc +msgid "Req" +msgstr "需" + +#: dselect/pkgdisplay.cc +msgid "Imp" +msgstr "要" + +#: dselect/pkgdisplay.cc +msgid "Std" +msgstr "標" + +#: dselect/pkgdisplay.cc +msgid "Opt" +msgstr "選" + +#: dselect/pkgdisplay.cc +msgid "Xtr" +msgstr "餘" + +#: dselect/pkgdisplay.cc +msgid "bUG" +msgstr "瑕" + +#: dselect/pkgdisplay.cc +msgid "?" +msgstr "?" + +#: dselect/pkgdisplay.cc +msgid "Broken" +msgstr "有故障" + +#: dselect/pkgdisplay.cc +msgid "New" +msgstr "新的" + +#: dselect/pkgdisplay.cc +msgid "Upgradable" +msgstr "" + +#: dselect/pkgdisplay.cc +msgid "Obsolete/local" +msgstr "淘汰/本地" + +#: dselect/pkgdisplay.cc +msgid "Installed" +msgstr "已安裝" + +#: dselect/pkgdisplay.cc +msgid "Available" +msgstr "可用" + +#: dselect/pkgdisplay.cc +msgid "Removed" +msgstr "已刪除" + +#: dselect/pkgdisplay.cc +msgid "Brokenly installed packages" +msgstr "有問題的已安裝套件" + +#: dselect/pkgdisplay.cc +msgid "Newly available packages" +msgstr "新的可用套件" + +#: dselect/pkgdisplay.cc +#, fuzzy +#| msgid "Newly available packages" +msgid "Upgradable packages" +msgstr "新的可用套件" + +#: dselect/pkgdisplay.cc +#, fuzzy +#| msgid "Obsolete and local packages present on system" +msgid "Obsolete and locally created packages" +msgstr "系統中安裝這些的套件是已淘汰的和本地的" + +#: dselect/pkgdisplay.cc +msgid "Installed packages" +msgstr "已經安裝的套件" + +#: dselect/pkgdisplay.cc +#, fuzzy +#| msgid "Up to date installed packages" +msgid "Available not installed packages" +msgstr "安裝了的套件版本是最新的" + +#: dselect/pkgdisplay.cc +msgid "Removed and no longer available packages" +msgstr "被刪除而且不再可用的套件" + +#: dselect/pkgdisplay.cc +msgid "Removed packages (configuration still present)" +msgstr "被刪除的套件 (其設定檔案仍然存在於系統中)" + +#: dselect/pkgdisplay.cc +msgid "Purged packages and those never installed" +msgstr "被完全清除的套件以及那些從未被安裝過的套件" + +#: dselect/pkgdisplay.cc +msgid "Purged" +msgstr "已徹底移除" + +#: dselect/pkgdisplay.cc +msgid "Error" +msgstr "錯誤" + +#: dselect/pkgdisplay.cc +msgid "Installed?" +msgstr "已安裝？" + +#: dselect/pkgdisplay.cc +msgid "Old mark" +msgstr "原有標記" + +#: dselect/pkgdisplay.cc +msgid "Marked for" +msgstr "現標記為" + +#: dselect/pkgdisplay.cc +msgid "EIOM" +msgstr "EIOM" + +#: dselect/pkgdisplay.cc +msgid "Section" +msgstr "所屬類別" + +#: dselect/pkgdisplay.cc +msgid "Priority" +msgstr "優先級" + +#: dselect/pkgdisplay.cc +msgid "Package" +msgstr "套件名" + +#: dselect/pkgdisplay.cc +#, fuzzy +#| msgid "Avail.ver" +msgid "Avail.arch" +msgstr "可用版本" + +#: dselect/pkgdisplay.cc +#, fuzzy +#| msgid "Inst.ver" +msgid "Inst.arch" +msgstr "安裝版本" + +#: dselect/pkgdisplay.cc +msgid "Avail.ver" +msgstr "可用版本" + +#: dselect/pkgdisplay.cc +msgid "Inst.ver" +msgstr "安裝版本" + +#: dselect/pkgdisplay.cc +msgid "dselect - recursive package listing" +msgstr "dselect - 遞迴地列出套件" + +#: dselect/pkgdisplay.cc +msgid "dselect - inspection of package states" +msgstr "dselect - 檢視套件的狀態" + +#: dselect/pkgdisplay.cc +msgid "dselect - main package listing" +msgstr "dselect - 套件主列表" + +#: dselect/pkgdisplay.cc +msgid " (by section)" +msgstr " (依類別區分)" + +#: dselect/pkgdisplay.cc +msgid " (avail., section)" +msgstr " (依是否可用和所屬類別)" + +#: dselect/pkgdisplay.cc +msgid " (status, section)" +msgstr " (依狀態和所屬類別)" + +#: dselect/pkgdisplay.cc +msgid " (by priority)" +msgstr " (依優先級)" + +#: dselect/pkgdisplay.cc +msgid " (avail., priority)" +msgstr " (依是否可用和優先級)" + +#: dselect/pkgdisplay.cc +msgid " (status, priority)" +msgstr " (依狀態和優先級)" + +#: dselect/pkgdisplay.cc +msgid " (alphabetically)" +msgstr " (依字母表順序)" + +#: dselect/pkgdisplay.cc +msgid " (by availability)" +msgstr " (依是否可用)" + +#: dselect/pkgdisplay.cc +msgid " (by status)" +msgstr " (依狀態區分)" + +#: dselect/pkgdisplay.cc +msgid " mark:+/=/- terse:v help:?" +msgstr " 標記:+/=/- 簡略:v 幫助:?" + +#: dselect/pkgdisplay.cc +msgid " mark:+/=/- verbose:v help:?" +msgstr " 標記:+/=/- 詳盡:v 幫助:?" + +#: dselect/pkgdisplay.cc +msgid " terse:v help:?" +msgstr " 簡略:v 幫助:?" + +#: dselect/pkgdisplay.cc +msgid " verbose:v help:?" +msgstr " 詳盡:v 幫助:?" + +#: dselect/pkginfo.cc +msgid "" +"The line you have highlighted represents many packages; if you ask to " +"install, remove, hold, etc. it you will affect all the packages which match " +"the criterion shown.\n" +"\n" +"If you move the highlight to a line for a particular package you will see " +"information about that package displayed here.\n" +"You can use 'o' and 'O' to change the sort order and give yourself the " +"opportunity to mark packages in different kinds of groups." +msgstr "" +"您現在高亮顯示的代表著多個套件。如果您要求安裝、刪除、保持等等，您將會\n" +"影響到符合所示標準的所有套件。\n" +"\n" +"如果您移動高亮光棒到單個套件所在的行上，您將會看到這裡顯示的是該套件的相\n" +"關訊息。\n" +"您可以按 `o' 或者 `O' 來以不同的規則排序，這樣您就能在不同類型的套件作\n" +"標記了。" + +#: dselect/pkginfo.cc +msgid "Interrelationships" +msgstr "相互關系" + +#: dselect/pkginfo.cc +msgid "No description available." +msgstr "無相關介紹。" + +#: dselect/pkginfo.cc +msgid "Installed control file information" +msgstr "已安裝的控制檔案訊息" + +#: dselect/pkginfo.cc +msgid "Available control file information" +msgstr "可用的控制檔案訊息" + +#: dselect/pkglist.cc +msgid "there are no packages" +msgstr "沒有多餘的套件" + +#: dselect/pkglist.cc +msgid "invalid search option given" +msgstr "指定了無效的搜尋選項" + +#: dselect/pkglist.cc +msgid "error in regular expression" +msgstr "正規表示法有誤" + +#: dselect/pkgsublist.cc +msgid " does not appear to be available\n" +msgstr " 看上去應該不可用\n" + +#: dselect/pkgsublist.cc +msgid " or " +msgstr " 或者 " + +#: dselect/pkgtop.cc +msgid "All" +msgstr "所有" + +#: dselect/pkgtop.cc +msgid "All packages" +msgstr "所有套件" + +#: dselect/pkgtop.cc +#, c-format +msgid "%s packages without a section" +msgstr "不指定類別 %s 套件" + +#: dselect/pkgtop.cc +#, c-format +msgid "%s packages in section %s" +msgstr "在 %2$s 類別中 %1$s 套件" + +#: dselect/pkgtop.cc +#, c-format +msgid "%s %s packages" +msgstr "%s %s 套件" + +#: dselect/pkgtop.cc +#, c-format +msgid "%s %s packages without a section" +msgstr "不指定類別 %s %s 套件" + +#: dselect/pkgtop.cc +#, c-format +msgid "%s %s packages in section %s" +msgstr "在 %3$s 類別中 %1$s %2$s 套件" + +#: dselect/pkgtop.cc +#, c-format +msgid "%-*s %s%s%s; %s (was: %s). %s" +msgstr "%-*s %s%s%s; %s (曾為：%s). %s" + +#~ msgid "" +#~ "\n" +#~ "\n" +#~ "%s: %s\n" +#~ msgstr "" +#~ "\n" +#~ "\n" +#~ "%s：%s\n" + +#~ msgid "failed to re-block SIGWINCH" +#~ msgstr "重新阻塞 SIGWINCH 信號失敗" + +#~ msgid "Actions:\n" +#~ msgstr "動作：\n" + +#~ msgid "Colours:\n" +#~ msgstr "顏色：\n" + +#~ msgid "Attributes:\n" +#~ msgstr "屬性：\n" + +#~ msgid "EOF before option name start" +#~ msgstr "在選項名開始前就發現了 EOF" + +#~ msgid "EOF before summary" +#~ msgstr "在概述前發現了 EOF" + +#~ msgid "!Bug!" +#~ msgstr "!臭蟲!" + +#~ msgid "Updated" +#~ msgstr "有更新" + +#~ msgid "Up-to-date" +#~ msgstr "已更新" + +#~ msgid "Updated packages (newer version is available)" +#~ msgstr "套件有更新版本(有更新的版本可用了)" + +#~ msgid "Available packages (not currently installed)" +#~ msgstr "可用的套件(目前沒有被安裝)" + +#~ msgid "foreign architectures enabled but multi-arch is not supported" +#~ msgstr "外部平台啟動但是多平台不支援" + +#~ msgid "unable to open new option file `%.250s'" +#~ msgstr "無法打開新的的選項檔案“%.250s”" + +#~ msgid "unable to close new option file `%.250s'" +#~ msgstr "無法關閉新的選項檔案“%.250s”" + +#~ msgid "unable to install new option as `%.250s'" +#~ msgstr "無法安裝新的選項檔案到“%.250s”" + +#~ msgid "returned error exit status %d.\n" +#~ msgstr "回傳了錯誤的退出狀態碼 %d。\n" + +#~ msgid "was interrupted.\n" +#~ msgstr "被中斷了。\n" + +#~ msgid "was terminated by a signal: %s.\n" +#~ msgstr "被一個信號中斷了：%s。\n" + +#~ msgid "(It left a coredump.)\n" +#~ msgstr "(它 coredump 了。)\n" + +#~ msgid "failed with an unknown wait return code %d.\n" +#~ msgstr "因為得到了一個不能識別的傳回碼 %d 而使操作失敗。\n" + +#~ msgid "unable to run %.250s process `%.250s'" +#~ msgstr "無法執行 %.250s 程序“%.250s”" + +#~ msgid "failed config" +#~ msgstr "設定失敗" + +#~ msgid "unable to wait for %.250s" +#~ msgstr "無法等待子程序“%.250s”" + +#~ msgid "got wrong child's status - asked for %ld, got %ld" +#~ msgstr "誤取了其他子程序的狀態 - 本想要 %ld 的，結果拿到了 %ld 的" + +#~ msgid "Recommended" +#~ msgstr "建議" + +#~ msgid "Contrib" +#~ msgstr "貢獻" + +#~ msgid "Rec" +#~ msgstr "薦" + +#~ msgid "Ctb" +#~ msgstr "獻" + +#~ msgid "" +#~ "baselist::startdisplay() done ...\n" +#~ "\n" +#~ " xmax=%d, ymax=%d;\n" +#~ "\n" +#~ " title_height=%d, colheads_height=%d, list_height=%d;\n" +#~ " thisstate_height=%d, info_height=%d, whatinfo_height=%d;\n" +#~ "\n" +#~ " colheads_row=%d, thisstate_row=%d, info_row=%d;\n" +#~ " whatinfo_row=%d, list_row=%d;\n" +#~ "\n" +#~ msgstr "" +#~ "baselist::startdisplay() done ...\n" +#~ "\n" +#~ " xmax=%d, ymax=%d;\n" +#~ "\n" +#~ " title_height=%d, colheads_height=%d, list_height=%d;\n" +#~ " thisstate_height=%d, info_height=%d, whatinfo_height=%d;\n" +#~ "\n" +#~ " colheads_row=%d, thisstate_row=%d, info_row=%d;\n" +#~ " whatinfo_row=%d, list_row=%d;\n" +#~ "\n" + +#~ msgid "[none]" +#~ msgstr "[無]" + +#~ msgid "error un-catching signal %d: %s\n" +#~ msgstr "發生錯誤，有無法取得的信號 %d：%s\n" + +#~ msgid "unable to ignore signal %d before running %.250s" +#~ msgstr "無法在執行 %2$.250s 之前忽略信號 %1$d" + +#~ msgid "(no clientdata)" +#~ msgstr "(無客戶端數據)" + +#~ msgid "<null>" +#~ msgstr "<無>" + +#~ msgid "interrelationships affecting " +#~ msgstr "套件的相互關系問題牽連到了" + +#~ msgid "description of " +#~ msgstr "下面套件的介紹" + +#~ msgid "description" +#~ msgstr "介紹" + +#~ msgid "currently installed control info" +#~ msgstr "當前安裝的控制訊息" + +#~ msgid "available version of control info for " +#~ msgstr "下面套件的可用控制訊息的版本" |