From 9a08cbfcc1ef900a04580f35afe2a4592d7d6030 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 02:45:20 +0200 Subject: Adding upstream version 1.19.8. Signed-off-by: Daniel Baumann --- dselect/methods/multicd/README.multicd | 113 ++++++ dselect/methods/multicd/desc.multi_cd | 3 + dselect/methods/multicd/desc.multi_mount | 11 + dselect/methods/multicd/desc.multi_nfs | 12 + dselect/methods/multicd/install | 312 ++++++++++++++ dselect/methods/multicd/names | 3 + dselect/methods/multicd/setup | 672 +++++++++++++++++++++++++++++++ dselect/methods/multicd/update | 130 ++++++ 8 files changed, 1256 insertions(+) create mode 100644 dselect/methods/multicd/README.multicd create mode 100644 dselect/methods/multicd/desc.multi_cd create mode 100644 dselect/methods/multicd/desc.multi_mount create mode 100644 dselect/methods/multicd/desc.multi_nfs create mode 100755 dselect/methods/multicd/install create mode 100644 dselect/methods/multicd/names create mode 100755 dselect/methods/multicd/setup create mode 100755 dselect/methods/multicd/update (limited to 'dselect/methods/multicd') diff --git a/dselect/methods/multicd/README.multicd b/dselect/methods/multicd/README.multicd new file mode 100644 index 0000000..adbf818 --- /dev/null +++ b/dselect/methods/multicd/README.multicd @@ -0,0 +1,113 @@ +Installation methods for multiple binary CDs +-------------------------------------------- + + This package provides three new methods to be used within dselect in + order to access Debian binary packages stored across multiple binary CD + ROMs. It will install itself into the methods directory from dselect + so the user will be able to use them immediately. + + These are the three new methods: + + . Multiple binary CD-ROMs + + . Multiple binary CD-ROMs, accessed through NFS + + . Multiple binary CD-ROMs, pre-mounted + +Acquiring package data +--------------------- + + Since this method is derived from the 'mounted' method the user is + able to access up to five binary directories within 'dists/stable': + + . main + . contrib + . non-free + . local + + The selected method will try to read the 'Packages.cd' file from each + of these directories if it is available. + +Identifying the CD-ROM +---------------------- + + A unique name is associated to each CD. This name should correspond + with the label on the front of the CD. The name is also available on + the CD, so the system can find out which CD is in the drive at any + time. + +Installing the files +-------------------- + + At the beginning of the installation the 'multicd' package will sort + the list of to-be-installed packages and install them CD by CD. If a + different CD-ROM is required the user will be prompted to exchange + the CD-ROM. + +Preparing multiple binary CD-ROMs +--------------------------------- + + Since the 'multicd' methods need to know which packages are on which + CD-ROMs one cannot use regular 'Packages' files. An additional data + field "X-Medium:" is required. The first CD-ROM from the set should + contain all 'Packages.cd' files. To be more convenient you should + include the 'Packages.cd' files on all CD-ROMs. This ensures that + you don't have to start with the first CD-ROM all the time. + + Additionally the package needs to gain information which CD-ROM is + currently used. Thus each CD-ROM contains the file '.disk/info' + which contains the symbolic name for the CD-ROM as specified by + "X-Medium:". + + In order to be able to create the modified 'Packages.cd' files, you + have to use the '-M medium' option of dpkg-scanpackages (supported + in dpkg-dev >= 1.15.5). + + To split the 'main' distribution into two CD-ROMs you'll need to + create a 'Packages.cd' file for each 'binary-$arch' directory. + Afterwards you simply append the second one to the first one and + put the resulting 'Packages.cd' file into both 'binary-$arch' + directories. + +Sample Layout +------------- + + CD1 .disk/info = "Debian GNU/Linux binary-i386" + dists/stable/main/binary-all/ + binary-i386/Packages.cd.gz + binary-i386/net/foo.deb + contrib/binary-i386/Packages.cd.gz + non-free/binary-i386/Packages.cd.gz + + CD2 .disk/info = "Debian GNU/Linux contrib-i386" + dists/stable/main/binary-i386/Packages.cd.gz + contrib/binary-all/ + binary-i386/Packages.cd.gz + binary-i386/net/foo.deb + non-free/binary-i386/Packages.cd.gz + + CD3 .disk/info = "Debian GNU/Linux non-free-i386" + dists/stable/main/binary-i386/Packages.cd.gz + contrib/binary-i386/Packages.cd.gz + non-free/binary-all/ + binary-i386/Packages.cd.gz + binary-i386/net/foo.deb + + To re-generate the Packages file you have to chdir into + 'dists/stable/$part' and issue 'dpkg-scanpackages' as follows. It's + assumed that you use regular compressed overrides files in + /pub/debian/indices. + + CD1: dpkg-scanpackages -M "Debian GNU/Linux binary-i386" \ + binary-i386 /pub/debian/indices/override.hamm.gz \ + dists/stable/ > binary-i386/Packages + + CD2: dpkg-scanpackages -M "Debian GNU/Linux contrib-i386" \ + binary-i386 /pub/debian/indices/override.hamm.contrib.gz \ + dists/stable/ > binary-i386/Packages + + CD3: dpkg-scanpackages -M "Debian GNU/Linux non-free-i386" \ + binary-i386 /pub/debian/indices/override.hamm.non-free.gz \ + dists/stable/ > binary-i386/Packages + +Please direct comments to Martin Schulze diff --git a/dselect/methods/multicd/desc.multi_cd b/dselect/methods/multicd/desc.multi_cd new file mode 100644 index 0000000..76e75d4 --- /dev/null +++ b/dselect/methods/multicd/desc.multi_cd @@ -0,0 +1,3 @@ +Installation from a CD-ROM set containing a Debian distribution. The +CD-ROMs may be or not be mounted already and should contain a standard +ISO9660 CD-ROM filesystem. diff --git a/dselect/methods/multicd/desc.multi_mount b/dselect/methods/multicd/desc.multi_mount new file mode 100644 index 0000000..884bef6 --- /dev/null +++ b/dselect/methods/multicd/desc.multi_mount @@ -0,0 +1,11 @@ +Installation from a pre-mounted directory with changing content. + +The directory contains the Packages.gz file from each distribution +area being installed (usually main, contrib, non-free and local) +as well as an excerpt of the corresponding binary/*/*.deb files. + +The easiest way for them to get this is to make a (partial) copy of +the distribution site's directory hierarchy, if possible. + +The contents of the mounted directory may change. Thus it's possible +to use this method for installations from images of a CDROM set. diff --git a/dselect/methods/multicd/desc.multi_nfs b/dselect/methods/multicd/desc.multi_nfs new file mode 100644 index 0000000..e63a8ab --- /dev/null +++ b/dselect/methods/multicd/desc.multi_nfs @@ -0,0 +1,12 @@ +Installation across the network, from an NFS server which is not +currently mounted. + +The server should contain the Packages.gz file from each distribution +area being installed (usually main, contrib, non-free and local) + as well as the corresponding binary/*/*.deb files. + +The easiest way for them to get this is to make a (partial) copy of +the distribution site's directory hierarchy, if possible. + +The contents of the mounted directory may change. Thus it's possible +to use this method for installations from a CDROM set. diff --git a/dselect/methods/multicd/install b/dselect/methods/multicd/install new file mode 100755 index 0000000..e4d772c --- /dev/null +++ b/dselect/methods/multicd/install @@ -0,0 +1,312 @@ +#!/bin/sh +# +# Copyright © 1995-1998 Ian Jackson +# Copyright © 1998 Heiko Schlittermann +# +# This is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +set -e +vardir="$1" +method=$2 +option=$3 + + +cd "$vardir/methods/$method" + +. ./shvar.$option + + +#debug() { echo "DEBUG: $@"; } +debug() { true; } +iarch=`dpkg --print-architecture` +ismulti() { test -e "$1/.disk/info" || test -e "$1$2/.disk/info"; } + +# 1/ mountpoint +# 2/ hierarchy +getdisklabel () { + debug "$1" "$2" + if [ -f $1/.disk/info ] + then + echo -n `head -1 "$1/.disk/info"` + else + if [ -f $1$2/.disk/info ] + then + echo -n `head -1 "$1$2/.disk/info"` + else + echo -n 'Non-Debian disc' + fi + fi +} + +xit=1 + +do_umount() { + if [ "$method" = "multi_mount" ] + then + echo true + return + fi + if [ -n "$umount" ]; then + echo umount "$umount" + #">/dev/null" "2>&1" + fi +} + +do_mount() { + + if [ "$method" = "multi_mount" ] + then + echo true + return + fi + + if [ ! -b "$p_blockdev" ] + then + loop=",loop" + fi + + if [ -n "$p_blockdev" ] + then + umount="$p_mountpoint" + echo mount -rt iso9660 -o nosuid,nodev${loop} "$p_blockdev" "$p_mountpoint"\; umount="$p_mountpoint" + fi + + if [ -n "$p_nfs" ] + then + umount="$p_mountpoint" + echo mount -rt nfs "$p_nfs" -o nosuid,nodev "$p_mountpoint"\; umount="$p_mountpoint" + fi + + #if [ -n "$p_multi" -a -n "$p_multi_contentsfile" ]; then + #echo "This is disk " + #echo " "`getdisklabel "${p_mountpoint}" "${p_hierbase}"` + #fi +} + +trap 'eval `do_umount`; exit $xit' 0 + +eval `do_mount` + +predep="$vardir/predep-package" +while true +do + thisdisk="`getdisklabel ${p_mountpoint} ${p_hierbase}`" + set +e + dpkg --predep-package >"$predep" + rc=$? + set -e + if test $rc = 1; then break; fi + test $rc = 0 + + perl -e ' + ($binaryprefix,$predep,$thisdisk) = @ARGV; + open(P, "< $predep") or die "cannot open $predep: $!\n"; + while (

) { + s/\s*\n$//; + $package= $_ if s/^Package: //i; + /^X-Medium:\s+(.*)\s*/ and $medium = $1; + @filename= split(/ /,$_) if s/^Filename: //i; + @msdosfilename= split(/ /,$_) if s/^MSDOS-Filename: //i; + } + die "internal error - no package" if length($package) == 0; + die "internal error - no filename" if not @filename; + die "internal error - mismatch >@filename< >@msdosfilename<" + if @filename && @msdosfilename && + @filename != @msdosfilename; + if ($medium && ($medium ne $thisdisk)) { + print " + +This is + $thisdisk +However, $package is expected on disc: + $medium +Please change the discs and press . + +"; + exit(1); + } + @invoke=(); $|=1; + for ($i=0; $i<=$#filename; $i++) { + $ppart= $i+1; + print "Looking for part $ppart of $package ... "; + if (-f "$binaryprefix$filename[$i]") { + $print= $filename[$i]; + $invoke= "$binaryprefix$filename[$i]"; + } elsif (-f "$binaryprefix$msdosfilename[$i]") { + $print= $msdosfilename[$i]; + $invoke= "$binaryprefix$msdosfilename[$i]"; + } else { + $base= $filename[$i]; $base =~ s,.*/,,; + $msdosbase= $msdosfilename[$i]; $msdosbase =~ s,.*/,,; + $c = open(X, "-|")); + if (not defined $c) { + die "failed to fork for find: $!\n"; + } + if (!$c) { + exec("find", "-L", + length($binaryprefix) ? $binaryprefix : ".", + "-name",$base,"-o","-name",$msdosbase); + die "failed to exec find: $!\n"; + } + while (chop($invoke= )) { last if -f $invoke; } + $print= $invoke; + if (substr($print,0,length($binaryprefix)+1) eq + "$binaryprefix/") { + $print= substr($print,length($binaryprefix)); + } + } + if (!length($invoke)) { + warn " + +Oh dear, I need to install or upgrade $package, but I don'\''t see +the appropriate file(s) anywhere. I'\''m expecting version $version or +later, as that is listed in the Packages.cd file. + +Perhaps you downloaded it with an unexpected name, or something. +In any case, you must find the file(s) and then either place it with +the correct filename(s) (as listed in the Packages.cd file or in +/var/lib/dpkg/available) and rerun the installation, or upgrade the +package by using '\''dpkg --install --auto-deconfigure'\'' by hand. + +"; + exit(1); + } + print "$print\n"; + push(@invoke,$invoke); + } + print "Running dpkg -iB for $package ...\n"; + exec("dpkg","-iB","--",@invoke); + die "failed to exec dpkg: $!\n"; + ' -- "$p_mountpoint$p_hierbase" "$predep" "$thisdisk" +done + + perl -e ' + $SIG{INT} = sub { cd $vardir; unlink ; exit 1; }; + $| = 1; + my ($vardir, $mountpoint, $hierbase, $mount, $umount) = @ARGV; + my $line; + my $AVAIL = "$vardir/methods/multicd/available"; + my $STATUS = "$vardir/status"; + my %Installed, %Filename, %Medium; + print "Get currently installed package versions..."; + open(IN, "$STATUS") or die "cannot open $STATUS: $!\n"; + $line = 0; + { local $/ = ""; + while () { + my %status; + my @pstat; + $line++ % 20 or print "."; + s/\n\s+/ /g; + %status = ("", split /^(\S*?):\s*/m, $_); + map { chomp $status{$_}; $status{$_} =~ s/^\s*(.*?)\s*$/$1/;} keys %status; + @pstat = split(/ /, $status{Status}); + next unless ($pstat[0] eq "install"); + if ($pstat[2] eq "config-files" || $pstat[2] eq "not-installed") { + $Installed{$status{Package}} = "0.0"; + } else { + $Installed{$status{Package}} = $status{Version} || "" ; + } + }; } + print "\nGot ", scalar keys %Installed, " installed/pending packages\n"; + print "Scanning available packages..."; + $line = 0; + open(IN, "$AVAIL") or die("Cannot open $AVAIL: $!\n"); + { local $/ = ""; + while () { + my $updated; + $line++ % 20 or print "."; + + s/\n\s+/ /g; + %avail = ("", split /^(\S*?):\s*/m, $_); + map { chomp $avail{$_}; $avail{$_} =~ s/^\s*(.*?)\s*$/$1/;} keys %avail; + + next unless defined $Installed{$avail{Package}}; + + system "dpkg", "--compare-versions", $avail{Version}, "gt", $Installed{$avail{Package}}; + $updated = ($? == 0); + #print "$avail{Package}(" . ($updated ? "+" : "=") . ") "; + $updated or next; + + $Filename{$avail{Package}} = $avail{Filename}; + + next unless defined $avail{"X-Medium"}; + ${Medium{$avail{"X-Medium"}}} or ${Medium{$avail{"X-Medium"}}} = []; + push @{${Medium{$avail{"X-Medium"}}}}, $avail{Package}; + }; }; + print "\n"; + + if (@_ = keys(%Medium)) { + print "You will need the following distribution disc(s):\n", + join (", ", @_), "\n"; + } + + foreach $need (sort @_) { + if (-r "$mountpoint/.disk/info") { + open(IN, "$mountpoint/.disk/info") or die("$mountpoint/.disk/info: $!\n"); + } else { + open(IN, "$mountpoint/$hierbase/.disk/info") or die("$mountpoint/$hierbase/.disk/info: $!\n"); + } + $disk = ; chomp $disk; close(IN); + + print "Processing disc\n $need\n"; + + while ($disk ne $need) { + print "Wrong disc. This is disc\n $disk\n"; + print "However, I need disc\n $need\n"; + print "Please change the discs and press \n"; + system($umount); + ; + system($mount); + $? and warn("cannot mount $mount\n"); + } continue { + if (-r "$mountpoint/.disk/info") { + open(IN, "$mountpoint/.disk/info") or die("$mountpoint/.disk/info: $!\n"); + } else { + open(IN, "$mountpoint/$hierbase/.disk/info") or die("$mountpoint/$hierbase/.disk/info: $!\n"); + } + $disk = ; chomp $disk; close(IN); + } + + -d "tmp" || mkdir "tmp", 0755 or die("Cannot mkdir tmp: $!\n"); + unlink ; + + print "creating symlinks...\n"; + foreach (@{$Medium{$need}}) { + ($basename = $Filename{$_}) =~ s/.*\///; + symlink "$mountpoint/$hierbase/$Filename{$_}", + "tmp/$basename"; + } + chdir "tmp" or die "cannot chdir to tmp: $!\n"; + system "dpkg", "-iGROEB", "."; + unlink <*>; + chdir ".."; + + if ($?) { + print "\nThe dpkg run produced errors. Please tell me, if I should\n", + "continue with the next CD. [Y/n]: "; + $answer = ; + exit 1 if $answer =~ /^n/i; + $ouch = $?; + } + } + + exit $ouch; + +' "$vardir" "$p_mountpoint" "$p_hierbase" "`do_mount`" "`do_umount`" + + +echo -n 'Installation OK. Hit RETURN. ' +read response + +xit=0 diff --git a/dselect/methods/multicd/names b/dselect/methods/multicd/names new file mode 100644 index 0000000..4a74be1 --- /dev/null +++ b/dselect/methods/multicd/names @@ -0,0 +1,3 @@ +31 multi_cd Install from a CD-ROM set. +36 multi_nfs Install from an NFS server (using the CD-ROM set) (not yet mounted). +46 multi_mount Install from a mounted partition with changing contents. diff --git a/dselect/methods/multicd/setup b/dselect/methods/multicd/setup new file mode 100755 index 0000000..3470da3 --- /dev/null +++ b/dselect/methods/multicd/setup @@ -0,0 +1,672 @@ +#!/bin/sh +# +# The ‘multicd’ package was initially written by Heiko Schlittermann +# based on builtin access methods written by Ian +# Jackson . The final packaging as well as +# cleanups were made by Martin Schulze who also +# put this package together for the slink release (Debian GNU/Linux +# 2.1). + +# Copyright © 1995-1998 Ian Jackson +# Copyright © 1998 Heiko Schlittermann +# +# This is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +set -e +vardir="$1" +method=$2 +option=$3 + +test -d "$vardir/methods/$method" || mkdir "$vardir/methods/$method" +cd "$vardir/methods/$method" +tp=/tmp/ddm$$ + +iarch=`dpkg --print-architecture` +dist=stable + +xit=1 +trap ' + rm -f $tp.? + if [ -n "$umount" ] + then + umount "$umount" >/dev/null 2>&1 + fi + exit $xit +' 0 + +if ls -d "$tp.?" >/dev/null 2>&1 +then + rm $tp.? +fi + +#debug() { echo "DEBUG: $@"; } +debug() { true; } +ismulti() { debug $1 $2; test -e "$1/.disk/info" || test -e "$1$2/.disk/info"; } + +# 1/ mountpoint +# 2/ hierarchy +getdisklabel () { + debug "$1" "$2" + if [ -f $1/.disk/info ] + then + echo -n `head -1 "$1/.disk/info"` + else + if [ -f $1$2/.disk/info ] + then + echo -n `head -1 "$1$2/.disk/info"` + else + echo -n 'Non-Debian disc' + fi + fi +} + +yesno () { + while true + do + echo -n "$2 [$1] " + read response + if [ -z "$response" ] + then + response="$1" + fi + case "$response" in + [Nn]*) yesno=no ; return ;; + [Yy]*) yesno=yes ; return ;; + esac + done +} + +getblockdev () { + mountpoint="$vardir/methods/mnt" + if [ -z "$defaultdevice" ] + then + defaultdevice="$newdefaultdevice" + elif [ "$defaultdevice" != "$newdefaultdevice" ] + then + echo \ + "Last time you specified installation from $defaultdevice." + fi + promptstring="$1" + while [ -z "$blockdevice" ] + do + echo -n "$promptstring [$defaultdevice]: " + read response + if [ -z "$response" ] + then + response="$defaultdevice" + fi + if [ ! -b "$response" ] + then + echo "$response is not a block device - will try as loopback."; + loop=",loop" + fi + tryblockdevice="$response" + if [ $option = multi_cd ] + then + fstype=iso9660 + elif [ $option = harddisk2 ] + then + blockbase="`echo \"$tryblockdevice\" | sed -e 's/[0-9]\{1,\}$//'`" + set +e + printf 'p\nq\n' | fdisk "$blockbase" 2>/dev/null >$tp.f + set -e + proposeddevice="$tryblockdevice" perl -ne ' +next unless /^ *Device +Boot +Begin +Start +End +Blocks +Id +System *$/i .. !/\S/; +next unless s:^/\S+::p && ${^MATCH} eq $ENV{proposeddevice}; +next unless s/^ +(\* +)?\d+ +\d+ +\d+ +\d+\+? +//; +next unless m/^([0-9a-f]{1,2}) /i; +%types= ( "1","msdos", "4","msdos", "6","msdos", "7","hpfs", "80","minix", + "81","minix", "83","ext2" ); +print $types{$1}; exit(0); ' <$tp.f >$tp.m + defaultfstype="`cat $tp.m`" + if [ -n "$defaultfstype" ] + then + cat </dev/null + then + echo \ + "Your kernel does not appear to support that filesystem type." + defaultfstype="" + fi + fi + echo -n "Supported filesystems: " + sed -e 's/^.* / /' /proc/filesystems | tr '\n' ' ' + echo -n " +Enter filesystem type (for $tryblockdevice) [$defaultfstype]: " + read fstype + if [ -z "$fstype" ] + then + fstype="$defaultfstype" + fi + fi + umount="$mountpoint" + if mount -rt "$fstype" -o nosuid,nodev$loop "$tryblockdevice" "$mountpoint" + then + echo + blockdevice="$tryblockdevice" + else + umount="" + echo \ + "Unable to mount $tryblockdevice on $mountpoint, type $fstype." + fi + done +} + +outputparam () { + echo "$2" | sed -e "s/'/'\\\\''/; s/^/$1='/; s/$/'/" >&3 +} + +## MAIN +intrkey="`stty -a | sed -n 's/.*intr = \([^;]*\);.*/\1/p'`" +echo " +If you make a mistake, use the interrupt key ($intrkey) to abort. +" + +# State variables, “best first” +# {main,ctb,nf,lcl}_{packages,binary} +# Empty before we've found them or if they're not available, +# set to the relevant bit under mountpoint otherwise. +# hierbase +# A directory containing a Debian FTP site mirror tree. +# mountpoint +# The mountpoint for the filesystem containing the stuff +# empty or unset if we don't know yet, or if we haven't mounted anything; +# may also be empty if ‘directory’ was set. +# blockdevice +# The actual block device to mount. +# fstype +# The filesystem type to use. +# defaultdevice +# The default block device to mount. + +p_usedevel=no +if [ -f shvar.$option ] +then + . ./shvar.$option + defaultdevice="$p_blockdev" + defaultnfsserver="$p_nfsserver" + defaultnfsrempath="$p_nfsrempath" + usedevel="$p_usedevel" +fi + +if [ $option = multi_cd ] +then + mount >$tp.m + sed -n 's/ ([^)]*)$//; s/^[^ ]* on //; s/ type iso9660$//p' <$tp.m >$tp.l + ncdroms=`wc -l <$tp.l` + if [ $ncdroms -gt 1 ] + then + response="" + while [ -z "$response" ] + do + echo \ + 'Several CD-ROMs (or other ISO9660 filesystems) are mounted:' + egrep 'type iso9660 \([^)]*\)$' <$tp.m | nl + echo -n \ + "Is it any of these ? Type a number, or 'n' for none. " + read response + response="`echo \"$response\" | sed -e 's/[ ]*$//'`" + if expr "$response" : '[0-9][0-9]*$' >/dev/null && \ + [ $response -ge 1 -a $response -le $ncdroms ] + then + mountpoint="`sed -n $response'p' <$tp.l`" + echo + elif expr "$response" : '[Nn]' >/dev/null + then + mountpoint="" + else + response="" + fi + done + elif [ $ncdroms = 1 ] + then + mountpoint="`cat $tp.l`" + perl -ne 'print if s/ type iso9660 \([^)]*\)$// && s/ on .*$//;' \ + <$tp.m >$tp.d + blockdevice="`cat $tp.d`" + yesno yes \ + "I see a CD-ROM: $blockdevice, mounted on $mountpoint. Is it the right one ?" + if [ $yesno = no ] + then + echo 'Unmounting it ...' + umount="$mountpoint" + while true + do + echo -n \ + 'Please insert the right disc, and hit return: ' + read response + if mount -rt iso9660 -o nosuid,nodev \ + "$blockdevice" "$mountpoint" + then + echo + break + fi + done + fi + fi + if [ -z "$mountpoint" ] + then + if [ -b /dev/cdrom ] + then + echo \ + 'I see that /dev/cdrom exists and is a block device.' + newdefaultdevice=/dev/cdrom + fi + getblockdev 'Insert the CD-ROM and enter the block device name' + fi +fi + +if [ $option = multi_nfs ] +then + mountpoint="$vardir/methods/mnt" + while [ -z "$nfsserver" ] + do + echo -n \ +"What is the name of the NFS server ? [$defaultnfsserver] " + read response + if [ -z "$response" -a -n "$defaultnfsserver" ] + then + response="$defaultnfsserver" + fi + if [ -z "$response" ]; then continue; fi + if [ -x "`which rpcinfo`" ] + then + if rpcinfo -u "$response" mountd >/dev/null + then + nfsserver="$response" + else + echo "$response appears not to be an NFS server." + fi + elif [ -x "`which ping`" ] + then + if ping -q -c 1 "$response" | grep -q ', 1 packets received' + then + nfsserver="$response" + else + echo "$response appears to be down or nonexistent." + fi + else + echo \ +"(I can't check that now because there is no rpcinfo or ping.)" + nfsserver="$response" + fi + done + while [ -z "$nfsrempath" ] + do + echo -n " +What is the pathname on the NFS server of the filesystem with +the Debian files ? [$defaultnfsrempath] " + read response + if [ -z "$response" -a -n "$defaultnfsrempath" ] + then + response="$defaultnfsrempath" + else + response="`echo \"$response\" | sed -e 's:/$::; s:^/*:/:'`" + fi + umount="$mountpoint" + if mount -rt nfs -o nosuid,nodev "$nfsserver:$response" "$mountpoint" + then + echo + nfsrempath="$response" + else + umount="" + echo \ +"Unable to mount NFS filesystem $nfsserver:$response." + fi + done + nfs="$nfsserver:$nfsrempath" +fi + +if [ $option = harddisk2 ] +then + set +e + printf 'p\nq\n' | fdisk /dev/hda 2>/dev/null >$tp.f + if [ $? != 0 ] + then + printf 'p\nq\n' | fdisk /dev/sda 2>/dev/null >$tp.f + fi + set -e + perl -ne ' +next unless /^ *Device +Boot +Begin +Start +End +Blocks +Id +System *$/i .. !/\S/; +next unless / [146] +DOS \d+-bit \S+$/; +next unless m:^/\S+:p; +print ${^MATCH}; ' <$tp.f >$tp.d + newdefaultdevice="`cat $tp.d`" + echo " +I need to know which disk partition contains the distribution files; +disk partitions are specified by the block device name in Linux." + if [ -n "$newdefaultdevice" ] + then + echo \ +"By the way, $newdefaultdevice looks like a DOS partition." + fi + getblockdev "Enter the partition's block device name" +fi + +if [ -n "$mountpoint" ] +then + # We must have $mountpoint + if [ $option = multi_cd ] + then + echo \ +'All directory names should be entered relative to the root of the CD-ROM. +' + elif [ $option = multi_nfs ] + then + echo \ +"All directory names should be entered relative to the root of the NFS +filesystem, ie relative to $nfsrempath on the server. +" + else + echo \ +"All directory names should be entered relative to the root of the +$fstype filesystem on $blockdevice. +" + fi +fi + +# now try to get the users idea where the debian +# hierarchy start below the mointpoint + +debug "mountpoint: $mountpoint" +while true +do + if ismulti "${mountpoint}" "${hierbase}"; then + multi=yes + fi + + if [ $option = multi_cd ] + then + echo \ +"I would like to know where on the CD-ROM the top level of the Debian +distribution is - this will usually contain the 'dists' directory. + +If the CD-ROM is badly organized and doesn't have a straightforward copy of +the distribution you may answer 'none' and we'll go through the parts +I need individually." + else + echo \ +"In order to make it easy for me to find the relevant files I'd ideally +like to install from a straightforward copy of the Debian distribution. +To use this I'll need to know where the top level of that copy of the +distribution is - this directory usually contains the Packages-Master file. + +If you do not have a straightforward copy of the distribution available +just answer 'none' and we'll go through the parts I need individually." + fi + + defhierbase=none + if [ -n "$p_hierbase" ]; then + if [ -d "$mountpoint/$p_hierbase/dists/$dist/main/binary-$iarch" \ + -o -n "$multi" ]; then + echo "Last time you said '$p_hierbase', and that looks plausible." + defhierbase="$p_hierbase" + else + echo " +Last time you said '$p_hierbase', but that doesn't look plausible, +since '$p_hierbase/dists/$dist/main/binary-$iarch' doesn't seem to exist. +And I can't get the impression that you're using a multi-CD set." + fi + fi + + # at this point defhierbase is set if it looks plausible + # if ‘none’ was entered, we assume a CD with a debian/ directory + + if [ none = "$defhierbase" -a -d "$mountpoint/debian/dists/$dist/main/binary-$iarch" ] + then + echo "'/debian' exists and looks plausible, so that's the default." + defhierbase=/debian + fi + + echo -n "Distribution top level ? [$defhierbase] " + read response + if [ -z "$response" ]; then response="$defhierbase"; fi + if [ none = "$response" ]; then + hierbase="" + break + elif ismulti "$mountpoint" "$response" && [ -z "$multi" ]; then + multi=yes + fi + + if ! [ -d "$mountpoint/$response/dists/$dist/main/binary-$iarch" \ + -o -n "$multi" ]; then + echo \ +"Neither $response/dists/$dist/main/binary-$iarch does not exist, +nor are you using a multi-CD set" + break + fi + + hierbase="`echo \"$response\" | sed -e 's:/$::; s:^/*:/:; s:/\+:/:g;'`" + debug "hierbase: [$hierbase]" + + if [ -n "$multi" ]; then + disklabel=`getdisklabel "$mountpoint" "/$response"` + echo "Ok, this is disc" + echo " $disklabel" + #echo "Updating multi CD contents file cache ..." + #multi_contentsfile="${mountpoint}/${response}/.disk/contents.gz" + #zcat "$multi_contentsfile" > disk-contents.$option + fi + + break; +done + +distribution=$dist +if [ -n "$hierbase" ] +then + if [ -d "$mountpoint/$hierbase/dists/unstable/binary-$iarch" ] + then + echo \ +' +Both a stable released distribution and a work-in-progress +development tree are available for installation. Would you like to +use the unreleased development tree (this is only recommended for +experts who like to live dangerously and want to help with testing) ?' + yesno "$p_usedevel" 'Use unreleased development distribution ?' + usedevel="$yesno" + if [ "$usedevel" = yes ] + then + distribution=development + fi + else + usedevel=no + fi + echo +fi + +case "$hierbase" in +/* ) ;; +'' ) ;; +* ) hierbase="/$hierbase" ;; +esac + +check_binary () { + # args: area-in-messages directory + debug "check_binary($@)" + + if [ ! -d "${mountpoint}$2" -a -z "$multi" ] + then + echo "'$2' does not exist." + return + fi + +# In this special case it is ok for a sub-distribution to not contain any +# .deb files. Each CD should contain all Packages.cd files but doesn't +# need to contain the .deb files. +# +# if ! { find -L "$mountpoint$2" -name '*.deb' -print \ +# | head -1 | grep . ; } >/dev/null 2>&1 && [ -z "$multi" ]; +# then +# echo "'$2' does not contain any *.deb packages." +# return +# fi + + this_binary="$2" + echo -n "Using '$this_binary' as $1 binary directory" + + if [ -n "$multi" ]; then + this_disk=`getdisklabel ${mountpoint} "/$hierbase"` + echo " from disc" + echo " '$this_disk'" + else + echo "" + fi +} + +find_area () { + # args: area-in-messages area-in-vars subdirectory-in-hier + # last-time-binary last-time-packages + debug "find_area($@)" + this_binary='' + this_packages='' + this_disk='' + if [ -n "$hierbase" ] + then + check_binary $1 `echo "$hierbase/dists/$3/$1/binary-$iarch" | sed 's:/\+:/:g'` + debug "THIS_BINARY $this_binary" + fi + if [ $option = multi_cd -a $2 = nf -a -z "$this_binary" ] + then + echo " +Note: most CD-ROM distributions of Debian do not include programs +available in the 'non-free' directory of the distribution site. +This is because these programs have copyrights that prevent +distribution for profit on a CD-ROM - ie they are not free software. +If you wish to install these programs you'll have to get them from an +alternative source." + fi + while [ -z "$this_binary" ] + do + defaultbinary="$4" + echo " +Which directory contains the *.deb packages from the $1 distribution +area (this directory is named '$3/binary' on the distribution site) ? +Say 'none' if this area is not available." + if [ $2 != main -a -z "$defaultbinary" ] + then + defaultbinary=none + fi + echo -n \ +"Enter _$1_ binary directory. [$4] + ? " + read response + if [ -z "$response" -a -n "$defaultbinary" ] + then + response="$defaultbinary" + fi + if [ none = "$response" ] + then + break + fi + case "$response" in + '' | none) continue ;; + esac + check_binary $1 "`echo \"$response\" | sed -e 's:/$::; s:^/*:/:'`" + done + if [ -n "$this_binary" ] + then + if [ "$multi" = "yes" ]; then + for f in Packages.cd.gz packages.cd.gz Packages.cd packages.cd + do + if [ -f "$mountpoint/$this_binary/$f" ] + then + this_packages="$this_binary/$f" + echo "Using '$this_packages' for $1." + break + fi + done + else + if [ -f "${mountpoint}${hierbase}/.disk/packages/$1/Packages.gz" ]; then + this_packages=`echo "${hierbase}/.disk/packages/$1/Packages.gz"|sed 's:/\+:/:g'` + echo "Using '${this_packages}' for $1." + fi + fi + while [ -z "$this_packages" ] + do + echo -n " +I can't find the $1 'Packages.cd' file. The information in the +'Packages.cd' file is important for package selection during new +installations, and is very useful for upgrades. + +If you overlooked it when downloading you should do get it now and +return to this installation procedure when you have done so: you will +find one Packages.cd file and one Packages.cd.gz file -- either will do -- +in the 'binary' subdirectory of each area on the FTP sites and +CD-ROMs. Alternatively (and this will be rather slow) I can scan the +packages in the distribution area - say 'scan' if you want me to do so. + +You need a separate Packages.cd file from each of the distribution areas +you wish to install. + +Where is the _$1_ 'Packages.cd' file (if none is available, say 'none') +[$5] + ? " + read response + if [ -z "$response" -a -n "$5" ] + then + response="$5" + fi + case "$response" in + '') break ;; + none) break ;; + scan) this_packages=scan ;; + /*) this_packages="$response" ;; + *) this_packages="/$response" ;; + esac + done + fi + eval $2'_binary="$this_binary"' + eval $2'_packages="$this_packages"' + eval $2'_disk="$this_disk"' +} + +find_area main main "$distribution" "$p_main_binary" "$p_main_packages" +find_area contrib ctb "$distribution" "$p_ctb_binary" "$p_ctb_packages" +find_area non-free nf "$distribution" "$p_nf_binary" "$p_nf_packages" +find_area local lcl local "$p_lcl_binary" "$p_lcl_packages" + +echo -n ' +Hit RETURN to continue. ' +read response + +exec 3>shvar.$option.new + +outputparam p_blockdev "$blockdevice" +outputparam p_fstype "$fstype" +outputparam p_mountpoint "$mountpoint" +outputparam p_nfsserver "$nfsserver" +outputparam p_nfsrempath "$nfsrempath" +outputparam p_nfs "$nfs" +outputparam p_hierbase "$hierbase" +outputparam p_usedevel "$usedevel" +outputparam p_main_packages "$main_packages" +outputparam p_main_binary "$main_binary" +outputparam p_main_disk "$main_disk" +outputparam p_ctb_packages "$ctb_packages" +outputparam p_ctb_binary "$ctb_binary" +outputparam p_ctb_disk "$ctb_disk" +outputparam p_nf_packages "$nf_packages" +outputparam p_nf_binary "$nf_binary" +outputparam p_nf_disk "$nf_disk" +outputparam p_lcl_packages "$lcl_packages" +outputparam p_lcl_binary "$lcl_binary" +outputparam p_multi "$multi" +outputparam p_multi_contentsfile "$multi_contentsfile" + +mv shvar.$option.new shvar.$option + +xit=0 diff --git a/dselect/methods/multicd/update b/dselect/methods/multicd/update new file mode 100755 index 0000000..0701ef0 --- /dev/null +++ b/dselect/methods/multicd/update @@ -0,0 +1,130 @@ +#!/bin/sh +# +# Copyright © 1995-1998 Ian Jackson +# Copyright © 1998 Heiko Schlittermann +# +# This is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +set -e +vardir="$1" +method=$2 +option=$3 +iarch=`dpkg --print-architecture` + +cd "$vardir/methods/$method" + +. ./shvar.$option + +#debug() { echo "DEBUG: $@"; } +debug() { true; } +ismulti() { debug $1 $2; test -e "$1/.disk/info" || test -e "$1$2/.disk/info"; } + +packages=0 +for f in main ctb nf lcl +do + eval 'this_packages=$p_'$f'_packages' + + if [ -n "$this_packages" ] + then + packages=1 + fi +done + +if [ $packages eq 0 ] +then + echo ' +No Packages files available, cannot update available packages list. +Hit RETURN to continue. ' + read response + exit 0 +fi + +xit=1 +trap ' + rm -f packages-{main,ctb,nf,lcl} + if [ -n "$umount" ] + then + umount "$umount" >/dev/null 2>&1 + fi + exit $xit +' 0 + +if [ ! -b "$p_blockdev" ] +then + loop=",loop" +fi + +if [ -n "$p_blockdev" ] +then + umount="$p_mountpoint" + mount -rt "$p_fstype" -o nosuid,nodev${loop} "$p_blockdev" "$p_mountpoint" +fi + +if [ -n "$p_nfs" ] +then + umount="$p_mountpoint" + mount -rt nfs "$p_nfs" -o nosuid,nodev "$p_mountpoint" +fi + +updatetype=update + +if [ -z "$p_multi" ]; then + exit 1 +fi + +for f in main ctb nf lcl +do + eval 'this_packages=$p_'$f'_packages' + case "$this_packages" in + '') + continue + ;; + scan) + eval 'this_binary=$p_'$f'_binary' + if [ -z "$this_binary" ]; then continue; fi + if [ "$updatetype" = update ] + then + dpkg --clear-avail + updatetype=merge + fi + echo Running dpkg --record-avail -R "$p_mountpoint$this_binary" + dpkg --record-avail -R "$p_mountpoint$this_binary" + ;; + *) + packagesfile="$p_mountpoint$this_packages" + case "$packagesfile" in + *.gz | *.Z | *.GZ | *.z) + echo -n "Uncompressing $packagesfile ... " + zcat <"$packagesfile" >packages-$f + echo done. + dpkg --$updatetype-avail packages-$f + updatetype=merge + ;; + '') + ;; + *) + dpkg --$updatetype-avail "$packagesfile" + updatetype=merge + ;; + esac + ;; + esac +done + +cp -f $vardir/available $vardir/methods/$method + +echo -n 'Update OK. Hit RETURN. ' +read response + +xit=0 -- cgit v1.2.3