From 96b619cc129afed52411b9fad3407037a1cb7207 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 02:47:26 +0200 Subject: Adding upstream version 4.92. Signed-off-by: Daniel Baumann --- exim_monitor/EDITME | 179 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 179 insertions(+) create mode 100644 exim_monitor/EDITME (limited to 'exim_monitor/EDITME') diff --git a/exim_monitor/EDITME b/exim_monitor/EDITME new file mode 100644 index 0000000..a70b7cb --- /dev/null +++ b/exim_monitor/EDITME @@ -0,0 +1,179 @@ +################################################## +# The Exim Monitor # +################################################## + +# This is the template for the Exim monitor's main build-time configuration +# file. It contains settings that are independent of any operating system. It +# should be edited and then saved to a file called Local/eximon.conf before +# running the make command to build the monitor, if any settings are required. +# Local/eximon.conf can be empty if no changes are needed. The examples given +# here (commented out) are the default settings. + +# Any settings made in the configuration file can be overridden at run time +# by setting up an environment variable with the same name as any of these +# options, but preceded by EXIMON_, for example, EXIMON_WINDOW_TITLE. + + +################################################################## +# Set these variables as appropriate for your system # +################################################################## + +# The qualifying name for your domain. The only use made of this is for +# testing that certain addresses are the same when displaying the +# log tail, and for shortening sender addresses in the queue display. + +# QUALIFY_DOMAIN= + +# The default minimum width and height for the whole window are 103 and +# 162 pixels respectively. This is enough to hold the left-most stripchart +# and the quit button. The values can be changed here. + +# MIN_HEIGHT=162 +# MIN_WIDTH=103 + +# If you uncomment the following setting, the window will start up at +# its minimum size, instead of the default maximum. There may be a quick +# flash during the start-up process. Defining it this way allows it to be +# overridden by an environment variable. + +# START_SMALL=${EXIMON_START_SMALL-yes} + +# The title for eximon's main display window. It is possible to have +# host name of the machine you are running on substituted into the +# title string. If you include the string ${fullhostname} then the +# complete name is used. If you include ${hostname} then the full +# host name will have the string contained in the DOMAIN variable +# stripped from its right-hand end before being substituted. Any other +# shell or environment variables may also be included. + +# If you use any substitutions, remember to ensure that the $ and {} +# characters are escaped from the shell, e.g. by using single quotes. + +# WINDOW_TITLE="${hostname} eximon" + +# The domain that you want to be stripped from the machine's full hostname +# when forming the short host name for the eximon window title, as +# described above. + +# DOMAIN= + +# Parameters for the rolling display of the tail of the exim log file. +# The width and depth are measured in pixels; LOG_BUFFER specifies the +# amount of store to set aside for holding the log tail, which is displayed +# in a scrolling window. When this store is full, the earlier 50% of it +# is discarded - this is much more efficient that throwing it away line +# by line. The number given can be followed by the letter K to indicate +# that the value is in kilobytes. A minimum value of 1K is enforced. + +# LOG_DEPTH=300 +# LOG_WIDTH=950 +# LOG_BUFFER=20K + +# The font which is used in the log tail display. This is defined in +# the normal X manner. It must be a "character cell" font, because this +# is required by the text widget. + +# LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1 + +# Parameters for the display of message that are on the exim queue. +# The width and depth are measured in pixels. + +# QUEUE_DEPTH=200 +# QUEUE_WIDTH=950 + +# The font which is used in the queue display. + +# QUEUE_FONT=$LOG_FONT + +# When a message has more than one undelivered address, they are listed +# one below the other. A limit can be placed on the number of addresses +# displayed for any one message. If there are more, then "..." is used +# to indicate this. + +# QUEUE_MAX_ADDRESSES=10 + +# The display of the contents of the queue is updated every QUEUE_INTERVAL +# seconds by default (there is a button to request update). + +# QUEUE_INTERVAL=300 + +# The size of the popup text window that is used for looking at the +# contents of messages, etc. + +# TEXT_DEPTH=200 + +# The keystroke/mouse-operation that is used to pop up the menu in the +# queue window is configurable. The default is Shift with the lefthand +# mouse button. The name of an alternative can be specified in the standard +# X way of naming these things. With the default configuration for the monitor, +# individuals can override this by setting the EXIMON_MENU_EVENT environment +# variable. + +# MENU_EVENT='Shift' + +# When the menu is used to perform an operation on a message, the result of the +# operation is normally visible in the log window, so Eximon doesn't display +# the output of the generated Exim command. However, you can request that +# this output be shown in a separate window by setting ACTION_OUTPUT to "yes". +# This does not apply to the output generated from attempting to deliver a +# message, which is always shown. + +# ACTION_OUTPUT=no + +# When some action is taken on a message, such as freezing it, or changing +# its recipients, the queue display is normally automatically updated. On +# systems that have very large queues, this can take some time and be dis- +# tracting. If this option is set to "no", the queue display is no longer +# automatically updated after an action is applied to a message. + +# ACTION_QUEUE_UPDATE=yes + +# When the menu item to display a message's body is invoked, the amount +# of data is limited to BODY_MAX bytes. This limit is a safety precaution +# to save the screen scrolling for ever on an enormous message. + +# BODY_MAX=20000 + +# The stripcharts are updated every STRIPCHART_INTERVAL seconds. + +# STRIPCHART_INTERVAL=60 + +# A stripchart showing the count of messages in the queue is always +# displayed on the left of eximon's window. Its name is "queue" by +# default, but can be changed by this variable. + +# QUEUE_STRIPCHART_NAME=queue + +# The following variable may be set to the name of a disc partition. If +# it is, a stripchart showing the percentage fullness of the partition +# will be displayed as the second stripchart. This can be used to keep +# a display of a mail spool partition on the screen. + +# SIZE_STRIPCHART=/var/mail + +# The name of the size stripchart will be the last component of SIZE_STRIPCHART +# unless the following variable is set to override it. + +# SIZE_STRIPCHART_NAME=space + +# The following variable contains a specification of which stripcharts +# you want eximon to display based on log entries. The string consists of +# pairs of strings, delimited by slash characters. The first string in each +# pair is a regular expression that matches some distinguishing feature in a +# exim log entry. + +# Entries that match the expression will be counted and displayed in a +# stripchart whose title is given by the second string. The string may +# be continued over several input lines, provided that it is split +# after a slash, and an additional slash (optionally preceded by white +# space) is included at the start of the continuation line. + +# Stripcharts configured by the following parameter are displayed to the +# right of the queue and size stripcharts, in the order defined here. + +# LOG_STRIPCHARTS='/ <= /in/ +# / => /out/ +# / => .+ R=local/local/ +# / => .+ T=[^ ]*smtp/smtp/' + +# End of exim_monitor/EDITME -- cgit v1.2.3