diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 00:53:35 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 00:53:35 +0000 |
commit | 69c6a41ffb878ef98c9378ed4b1634a404cfaa7f (patch) | |
tree | b2a4f704565d62fbb129ab9dc3b35977c50e6e7f /doc/operation.rst | |
parent | Initial commit. (diff) | |
download | knot-69c6a41ffb878ef98c9378ed4b1634a404cfaa7f.tar.xz knot-69c6a41ffb878ef98c9378ed4b1634a404cfaa7f.zip |
Adding upstream version 2.7.6.upstream/2.7.6upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | doc/operation.rst | 722 |
1 files changed, 722 insertions, 0 deletions
diff --git a/doc/operation.rst b/doc/operation.rst new file mode 100644 index 0000000..25cb964 --- /dev/null +++ b/doc/operation.rst @@ -0,0 +1,722 @@ +.. highlight:: console +.. _Operation: + +********* +Operation +********* + +The Knot DNS server part ``knotd`` can run either in the foreground, or in the background +using the ``-d`` option. When run in the foreground, it doesn't create a PID file. +Other than that, there are no differences and you can control both the same way. + +The tool ``knotc`` is designed as a user front-end, making it easier to control running +server daemon. If you want to control the daemon directly, use ``SIGINT`` to quit +the process or ``SIGHUP`` to reload the configuration. + +If you pass neither configuration file (``-c`` parameter) nor configuration +database (``-C`` parameter), the server will first attempt to use the default +configuration database stored in ``/var/lib/knot/confdb`` or the +default configuration file stored in ``/etc/knot/knot.conf``. Both the +default paths can be reconfigured with ``--with-storage=path`` or +``--with-configdir=path`` respectively. + +Example of server start as a daemon:: + + $ knotd -d -c knot.conf + +Example of server shutdown:: + + $ knotc -c knot.conf stop + +For a complete list of actions refer to the program help (``-h`` parameter) +or to the corresponding manual page. + +Also, the server needs to create :ref:`server_rundir` and :ref:`zone_storage` +directories in order to run properly. + +.. _Configuration database: + +Configuration database +====================== + +In the case of a huge configuration file, the configuration can be stored +in a binary database. Such a database can be simply initialized:: + + $ knotc conf-init + +or preloaded from a file:: + + $ knotc conf-import input.conf + +Also the configuration database can be exported into a textual file:: + + $ knotc conf-export output.conf + +.. WARNING:: + The import and export commands access the configuration database + directly, without any interaction with the server. So it is strictly + recommended to perform these operations when the server is not running. + +.. _Dynamic configuration: + +Dynamic configuration +===================== + +The configuration database can be accessed using the server control interface +while the server is running. To get the full power of the dynamic configuration, +the server must be started with a specified configuration database location +or with the default database initialized. Otherwise all the changes to the +configuration will be temporary (until the server is stopped). + +.. NOTE:: + The database can be :ref:`imported<Configuration database>` in advance. + +Most of the commands get an item name and value parameters. The item name is +in the form of ``section[identifier].name``. If the item is multivalued, +more values can be specified as individual (command line) arguments. + +.. CAUTION:: + Beware of the possibility of pathname expansion by the shell. For this reason, + it is advisable to slash square brackets or to quote command parameters if + not executed in the interactive mode. + +To get the list of configuration sections or to get the list of section items:: + + $ knotc conf-list + $ knotc conf-list 'server' + +To get the whole configuration or to get the whole configuration section or +to get all section identifiers or to get a specific configuration item:: + + $ knotc conf-read + $ knotc conf-read 'remote' + $ knotc conf-read 'zone.domain' + $ knotc conf-read 'zone[example.com].master' + +.. WARNING:: + The following operations don't work on OpenBSD! + +Modifying operations require an active configuration database transaction. +Just one transaction can be active at a time. Such a transaction then can +be aborted or committed. A semantic check is executed automatically before +every commit:: + + $ knotc conf-begin + $ knotc conf-abort + $ knotc conf-commit + +To set a configuration item value or to add more values or to add a new +section identifier or to add a value to all identified sections:: + + $ knotc conf-set 'server.identity' 'Knot DNS' + $ knotc conf-set 'server.listen' '0.0.0.0@53' '::@53' + $ knotc conf-set 'zone[example.com]' + $ knotc conf-set 'zone.slave' 'slave2' + +.. NOTE:: + Also the include operation can be performed. A non-absolute file + location is relative to the server binary path, not to the control binary + path! + + :: + + $ knotc conf-set 'include' '/tmp/new_zones.conf' + +To unset the whole configuration or to unset the whole configuration section +or to unset an identified section or to unset an item or to unset a specific +item value:: + + $ knotc conf-unset + $ knotc conf-unset 'zone' + $ knotc conf-unset 'zone[example.com]' + $ knotc conf-unset 'zone[example.com].master' + $ knotc conf-unset 'zone[example.com].master' 'remote2' 'remote5' + +To get the change between the current configuration and the active transaction +for the whole configuration or for a specific section or for a specific +identified section or for a specific item:: + + $ knotc conf-diff + $ knotc conf-diff 'zone' + $ knotc conf-diff 'zone[example.com]' + $ knotc conf-diff 'zone[example.com].master' + +An example of possible configuration initialization:: + + $ knotc conf-begin + $ knotc conf-set 'server.listen' '0.0.0.0@53' '::@53' + $ knotc conf-set 'remote[master_server]' + $ knotc conf-set 'remote[master_server].address' '192.168.1.1' + $ knotc conf-set 'template[default]' + $ knotc conf-set 'template[default].storage' '/var/lib/knot/zones/' + $ knotc conf-set 'template[default].master' 'master_server' + $ knotc conf-set 'zone[example.com]' + $ knotc conf-diff + $ knotc conf-commit + +.. _Running a slave server: + +Slave mode +========== + +Running the server as a slave is very straightforward as you usually +bootstrap zones over AXFR and thus avoid any manual zone operations. +In contrast to AXFR, when the incremental transfer finishes, it stores +the differences in the journal file and doesn't update the zone file +immediately but after the :ref:`zone_zonefile-sync` period elapses. + +.. _Running a master server: + +Master mode +=========== + +If you just want to check the zone files before starting, you can use:: + + $ knotc zone-check example.com + +For an approximate estimation of server's memory consumption, you can use:: + + $ knotc zone-memstats example.com + +This action prints the count of resource records, percentage of signed +records and finally estimation of memory consumption for each zone, unless +specified otherwise. Please note that the estimated values may differ from the +actual consumption. Also, for slave servers with incoming transfers +enabled, be aware that the actual memory consumption might be double +or higher during transfers. + +.. _Editing zones: + +Reading and editing zones +========================= + +Knot DNS allows you to read or change zone contents online using server +control interface. + +.. WARNING:: + Avoid concurrent zone file modification, and/or dynamic updates, and/or + zone changing over control interface. Otherwise, the zone could be inconsistent. + +To get contents of all configured zones, or a specific zone contents, or zone +records with a specific owner, or even with a specific record type:: + + $ knotc zone-read -- + $ knotc zone-read example.com + $ knotc zone-read example.com ns1 + $ knotc zone-read example.com ns1 NS + +.. NOTE:: + If the record owner is not a fully qualified domain name, then it is + considered as a relative name to the zone name. + +To start a writing transaction on all zones or on specific zones:: + + $ knotc zone-begin -- + $ knotc zone-begin example.com example.net + +Now you can list all nodes within the transaction using the ```zone-get``` +command, which always returns current data with all changes included. The +command has the same syntax as ```zone-read```. + +Within the transaction, you can add a record to a specific zone or to all +zones with an open transaction:: + + $ knotc zone-set example.com ns1 3600 A 192.168.0.1 + $ knotc zone-set -- ns1 3600 A 192.168.0.1 + +To remove all records with a specific owner, or a specific rrset, or a +specific record data:: + + $ knotc zone-unset example.com ns1 + $ knotc zone-unset example.com ns1 A + $ knotc zone-unset example.com ns1 A 192.168.0.2 + +To see the difference between the original zone and the current version:: + + $ knotc zone-diff example.com + +Finally, either commit or abort your transaction:: + + $ knotc zone-commit example.com + $ knotc zone-abort example.com + +A full example of setting up a completely new zone from scratch:: + + $ knotc conf-begin + $ knotc conf-set zone.domain example.com + $ knotc conf-commit + $ knotc zone-begin example.com + $ knotc zone-set example.com @ 7200 SOA ns hostmaster 1 86400 900 691200 3600 + $ knotc zone-set example.com ns 3600 A 192.168.0.1 + $ knotc zone-set example.com www 3600 A 192.168.0.100 + $ knotc zone-commit example.com + +.. NOTE:: + If quotes are necessary for record data specification, don't forget to escape them:: + + $ knotc zone-set example.com @ 3600 TXT \"v=spf1 a:mail.example.com -all\" + +.. _Editing zone file: + +Reading and editing the zone file safely +======================================== + +It's always possible to read and edit the zone contents via zone file manipulation. +However, it may lead to confusion if zone contents are continuously changing or +in case of operator's mistake. This paragraph describes a safe way to modify zone +by editing the zone file, taking advantage of zone freeze/thaw feature.:: + + $ knotc zone-freeze example.com. + $ while ! knotc zone-status example.com. +freeze | grep -q 'freeze: yes'; do sleep 1; done + $ knotc zone-flush example.com. + +After calling freeze to the zone, there still may be running zone operations (e.g. signing), +causing freeze pending. So we watch the zone status until frozen. Then we can flush the +frozen zone contents. + +Now we open a text editor and perform desired changes to the zone file. It's necessary +to **increase SOA serial** in this step to keep consistency. Finally, we can load the +modified zone file and if successful, thaw the zone.:: + + $ knotc zone-reload example.com. + $ knotc zone-thaw example.com. + +.. _Zone loading: + +Zone loading +============ + +The process how the server loads a zone is influenced by the configuration of the +:ref:`zonefile-load <zone_zonefile-load>` and :ref:`journal-content <zone_journal-content>` +parameters (also DNSSEC signing applies), the existence of a zone file and journal +(and their relative out-of-dateness), and whether it is a cold start of the server +or a zone reload (e.g. invoked by the knotc interface). Please note that zone transfers +are not taken into account here – they are planned after the zone is loaded +(including AXFR bootstrap). + +If the zone file exists and is not excluded by the configuration, it is first loaded +and according to its SOA serial number relevant journal changesets are applied. +If this is a zone reload and we have "`zonefile-load: difference`", the difference +between old and new contents is computed and stored into the journal like an update. +The zone file should be either unchaged since last load or changed with incremented +SOA serial. In the case of a decreased SOA serial, the load is interrupted with +an error; if unchanged, it is increased by the server. + +If the procedure described above succeeds without errors, the resulting zone contents are (after potential DNSSEC signing) +used as the new zone. + +The option "`journal-content: all`" lets the server, beside better performance, to keep +track of the zone contents also across server restarts. It makes the cold start +effectively work like a zone reload with the old contents loaded from the journal +(unless this is the very first start with the zone not yet saved into the journal). + +.. _Journal behaviour: + +Journal behaviour +================= + +The zone journal keeps some history of changes made to the zone. It is useful for +responding to IXFR queries. Also if :ref:`zone file flush <zone_zonefile-sync>` is disabled, +journal keeps diff between the zone file and zone for the case of server shutdown. +The history is stored in changesets – diffs of zone contents between two +(usually subsequent) zone serials. + +Journals of all zones are stored in a common LMDB database. Huge changesets are +split into 70 KiB [#fn-hc]_ blocks to prevent fragmentation of the DB. +Journal does each operation in one transaction to keep consistency of the DB and performance. +The exception is when store transaction exceeds 5 % of the whole DB mapsize, it is split into multiple ones +and some dirty-chunks-management involves. + +Each zone journal has own :ref:`usage limit <zone_max-journal-usage>` +on how much DB space it may occupy. Before hitting the limit, +changesets are stored one-by-one and whole history is linear. While hitting the limit, +the zone is flushed into the zone file, and oldest changesets are deleted as needed to free +some space. Actually, twice [#fn-hc]_ the needed amount is deleted to +prevent too frequent deletes. Further zone file flush is invoked after the journal runs out of deletable +"flushed changesets". + +If :ref:`zone file flush <zone_zonefile-sync>` is disabled, then instead of flushing the zone, the journal tries to +save space by merging older changesets into one. It works well if the changes rewrite +each other, e.g. periodically changing few zone records, re-signing whole zone... +The difference between the zone file and the zone is thus preserved, even if journal deletes some +older changesets. + +If the journal is used to store both zone history and contents, a special changeset +is present with zone contents. When the journal gets full, the changes are merged into this +special changeset. + +There is also a :ref:`safety hard limit <template_max-journal-db-size>` for overall +journal database size, but it's strongly recommended to set the per-zone limits in +a way to prevent hitting this one. For LMDB, it's hard to recover from the +database-full state. For wiping one zone's journal, see *knotc zone-purge +journal* +command. + +.. [#fn-hc] This constant is hardcoded. + +.. _Handling, zone file, journal, changes, serials: + +Handling zone file, journal, changes, serials +============================================= + +Some configuration options regarding the zone file and journal, together with operation +procedures, might lead to unexpected results. This chapter shall point out +some interference and both recommend and warn before some combinations thereof. +Unfortunately, there is no optimal combination of configuration options, +every approach has some disadvantages. + +Example 1 +--------- + +Keep the zone file updated:: + + zonefile-sync: 0 + zonefile-load: whole + journal-content: changes + +This is actually setting default values. The user can always check the current zone +contents in the zonei file, and also modify it (recommended with server turned-off or +taking the :ref:`safe way<Editing zone file>`). Journal serves here just as a source of +history for slaves' IXFR. Some users dislike that the server overwrites their prettily +prepared zone file. + +Example 2 +--------- + +Zonefileless setup:: + + zonefile-sync: -1 + zonefile-load: none + journal-content: all + +Zone contents are stored just in the journal. The zone is updated by DDNS, +zone transfer, or via the control interface. The user might have filled the +zone contents initially from a zone file by setting "zonefile-load: whole" temporarily. +It's also a good setup for slaves. Anyway, it's recommended to carefully tune +the journal-size-related options to avoid surprises of journal getting full. + +Example 3 +--------- + +Input-only zone file:: + + zonefile-sync: -1 + zonefile-load: difference + journal-content: changes + +The user can make changes to the zone by editing the zone file, and his pretty zone file +gets never overwritten and filled with DNSSEC-related autogenerated records – they are +only stored in the journal. + +The zone file's SOA serial must be properly set to a number which is higher than the +current SOA serial in the zone (not in the zone file) if manually updated! + +.. NOTE:: + In the case of "zonefile-load: difference-no-serial", the SOA serial is + handled by the server automatically during server reload. + +.. _DNSSEC Key rollovers: + +DNSSEC key rollovers +==================== + +This section describes the process of DNSSEC key rollover and its implementation +in Knot DNS, and how the operator might watch and check that it's working correctly. +The prerequisite is automatic zone signing with enabled +:ref:`automatic key management<dnssec-automatic-ksk-management>`. + +The KSK and ZSK rollovers are triggered by the respective zone key getting old according +to the settings (see :ref:`KSK<policy_ksk-lifetime>` and :ref:`ZSK<policy_zsk-lifetime>` lifetimes). + +The algorithm rollover happens when the policy :ref:`algorithm<policy_algorithm>` +field is updated to a different value. + +The signing scheme rollover happens when the policy :ref:`singing scheme<policy_single-type-signing>` +field is changed. + +It's also possible to change the algorithm and signing scheme in one rollover. + +The operator may check the next rollover phase time by watching the next zone signing time, +either in the log or via ``knotc zone-status``. There is no special log for finishing a rollover. + +.. NOTE:: + There are never two key rollovers running in parallel for one zone. If + a rollover is triggered while another is in progress, it waits until the + first one is finished. + +The ZSK rollover is performed with Pre-publish method, KSK rollover uses Double-Signature +scheme, as described in :rfc:`6781`. + +.. _DNSSEC KSK rollover example: + +KSK rollover example +-------------------- + +Let's start with the following set of keys:: + + 2017-10-24T15:40:48 info: [example.com.] DNSSEC, key, tag 4700, algorithm RSASHA256, KSK, public, active + 2017-10-24T15:40:48 info: [example.com.] DNSSEC, key, tag 30936, algorithm RSASHA256, public, active + +The last fields hint the key state: ``public`` denotes a key that will be presented +as the DNSKEY record, ``ready`` means that CDS/CDNSKEY records were created, +``active`` tells us if the key is used for signing. + +Upon the zone's KSK lifetime expiration, the rollover continues along the +lines of :rfc:`6781#section-4.1.2`:: + + 2017-10-24T15:41:17 info: [example.com.] DNSSEC, signing zone + 2017-10-24T15:41:18 info: [example.com.] DNSSEC, KSK rollover started + 2017-10-24T15:41:18 info: [example.com.] DNSSEC, key, tag 6674, algorithm RSASHA256, KSK, public + 2017-10-24T15:41:18 info: [example.com.] DNSSEC, key, tag 4700, algorithm RSASHA256, KSK, public, active + 2017-10-24T15:41:18 info: [example.com.] DNSSEC, key, tag 30936, algorithm RSASHA256, public, active + 2017-10-24T15:41:18 info: [example.com.] DNSSEC, signing started + 2017-10-24T15:41:18 info: [example.com.] DNSSEC, successfully signed + 2017-10-24T15:41:18 info: [example.com.] DNSSEC, next signing at 2017-10-24T15:41:22 + ... + 2017-10-24T15:41:22 info: [example.com.] DNSSEC, signing zone + 2017-10-24T15:41:22 info: [example.com.] DNSSEC, key, tag 4700, algorithm RSASHA256, KSK, public, active + 2017-10-24T15:41:22 info: [example.com.] DNSSEC, key, tag 6674, algorithm RSASHA256, KSK, public, ready, active + 2017-10-24T15:41:22 info: [example.com.] DNSSEC, key, tag 30936, algorithm RSASHA256, public, active + 2017-10-24T15:41:22 info: [example.com.] DNSSEC, signing started + 2017-10-24T15:41:22 info: [example.com.] DNSSEC, successfully signed + 2017-10-24T15:41:22 info: [example.com.] DNSSEC, next signing at 2017-10-24T15:41:23 + 2017-10-24T15:41:22 notice: [example.com.] DNSSEC, KSK submission, waiting for confirmation + +At this point new KSK has to be submitted to the parent zone. Knot detects the updated parent's DS +record automatically (and waits for additional period of the DS's TTL before retiring the old key) +if :ref:`parent DS check<Submission section>` is configured, otherwise the +operator must confirm it manually with ``knotc zone-ksk-submitted``:: + + 2017-10-24T15:41:23 notice: [example.com.] DNSSEC, KSK submission, confirmed + 2017-10-24T15:41:23 info: [example.com.] DNSSEC, signing zone + 2017-10-24T15:41:23 info: [example.com.] DNSSEC, key, tag 6674, algorithm RSASHA256, KSK, public, active + 2017-10-24T15:41:23 info: [example.com.] DNSSEC, key, tag 4700, algorithm RSASHA256, KSK, public, active + 2017-10-24T15:41:23 info: [example.com.] DNSSEC, key, tag 30936, algorithm RSASHA256, public, active + 2017-10-24T15:41:23 info: [example.com.] DNSSEC, signing started + 2017-10-24T15:41:23 info: [example.com.] DNSSEC, zone is up-to-date + 2017-10-24T15:41:23 info: [example.com.] DNSSEC, next signing at 2017-10-24T15:41:28 + ... + 2017-10-24T15:41:28 info: [example.com.] DNSSEC, signing zone + 2017-10-24T15:41:28 info: [example.com.] DNSSEC, key, tag 4700, algorithm RSASHA256, KSK, public + 2017-10-24T15:41:28 info: [example.com.] DNSSEC, key, tag 6674, algorithm RSASHA256, KSK, public, active + 2017-10-24T15:41:28 info: [example.com.] DNSSEC, key, tag 30936, algorithm RSASHA256, public, active + 2017-10-24T15:41:28 info: [example.com.] DNSSEC, signing started + 2017-10-24T15:41:28 info: [example.com.] DNSSEC, successfully signed + 2017-10-24T15:41:28 info: [example.com.] DNSSEC, next signing at 2017-10-24T15:41:33 + ... + 2017-10-24T15:41:33 info: [example.com.] DNSSEC, signing zone + 2017-10-24T15:41:33 info: [example.com.] DNSSEC, key, tag 6674, algorithm RSASHA256, KSK, public, active + 2017-10-24T15:41:33 info: [example.com.] DNSSEC, key, tag 30936, algorithm RSASHA256, public, active + 2017-10-24T15:41:33 info: [example.com.] DNSSEC, signing started + 2017-10-24T15:41:33 info: [example.com.] DNSSEC, successfully signed + 2017-10-24T15:41:33 info: [example.com.] DNSSEC, next signing at 2017-10-24T15:41:47 + +.. TIP:: + If systemd is available, the KSK submission event is logged into journald + in a structured way. The intended use case is to trigger a user-created script. + Example:: + + journalctl -f -t knotd -o json | python3 -c ' + import json, sys + for line in sys.stdin: + k = json.loads(line); + if "KEY_SUBMISSION" in k: + print("%s, zone=%s, keytag=%s" % (k["__REALTIME_TIMESTAMP"], k["ZONE"], k["KEY_SUBMISSION"])) + ' + +Algorithm rollover example +-------------------------- + +Let's start with the following set of keys:: + + 2017-10-24T14:53:06 info: [example.com.] DNSSEC, key, tag 65225, algorithm RSASHA256, KSK, public, active + 2017-10-24T14:53:06 info: [example.com.] DNSSEC, key, tag 47014, algorithm RSASHA256, public, active + +When the zone's DNSSEC policy algorithm is changed to ``ECDSAP256SHA256`` and the +server is reloaded, the rollover continues along the lines of :rfc:`6781#section-4.1.4`:: + + 2017-10-24T14:53:26 info: [example.com.] DNSSEC, algorithm rollover started + 2017-10-24T14:53:26 info: [example.com.] DNSSEC, key, tag 34608, algorithm ECDSAP256SHA256, KSK + 2017-10-24T14:53:26 info: [example.com.] DNSSEC, key, tag 13674, algorithm ECDSAP256SHA256, active + 2017-10-24T14:53:26 info: [example.com.] DNSSEC, key, tag 65225, algorithm RSASHA256, KSK, public, active + 2017-10-24T14:53:26 info: [example.com.] DNSSEC, key, tag 47014, algorithm RSASHA256, public, active + 2017-10-24T14:53:26 info: [example.com.] DNSSEC, signing started + 2017-10-24T14:53:26 info: [example.com.] DNSSEC, successfully signed + 2017-10-24T14:53:26 info: [example.com.] DNSSEC, next signing at 2017-10-24T14:53:34 + ... + 2017-10-24T14:53:34 info: [example.com.] DNSSEC, signing zone + 2017-10-24T14:53:34 info: [example.com.] DNSSEC, key, tag 34608, algorithm ECDSAP256SHA256, KSK, public, active + 2017-10-24T14:53:34 info: [example.com.] DNSSEC, key, tag 13674, algorithm ECDSAP256SHA256, public, active + 2017-10-24T14:53:34 info: [example.com.] DNSSEC, key, tag 65225, algorithm RSASHA256, KSK, public, active + 2017-10-24T14:53:34 info: [example.com.] DNSSEC, key, tag 47014, algorithm RSASHA256, public, active + 2017-10-24T14:53:34 info: [example.com.] DNSSEC, signing started + 2017-10-24T14:53:34 info: [example.com.] DNSSEC, successfully signed + 2017-10-24T14:53:34 info: [example.com.] DNSSEC, next signing at 2017-10-24T14:53:44 + ... + 2017-10-24T14:53:44 info: [example.com.] DNSSEC, signing zone + 2017-10-24T14:53:44 info: [example.com.] DNSSEC, key, tag 34608, algorithm ECDSAP256SHA256, KSK, public, ready, active + 2017-10-24T14:53:44 info: [example.com.] DNSSEC, key, tag 13674, algorithm ECDSAP256SHA256, public, active + 2017-10-24T14:53:44 info: [example.com.] DNSSEC, key, tag 65225, algorithm RSASHA256, KSK, public, active + 2017-10-24T14:53:44 info: [example.com.] DNSSEC, key, tag 47014, algorithm RSASHA256, public, active + 2017-10-24T14:53:44 info: [example.com.] DNSSEC, signing started + 2017-10-24T14:53:44 info: [example.com.] DNSSEC, successfully signed + 2017-10-24T14:53:44 info: [example.com.] DNSSEC, next signing at 2017-10-31T13:52:37 + 2017-10-24T14:53:44 notice: [example.com.] DNSSEC, KSK submission, waiting for confirmation + +Again, KSK submission follows as in :ref:`KSK rollover example<DNSSEC ksk rollover example>`:: + + 2017-10-24T14:54:20 notice: [example.com.] DNSSEC, KSK submission, confirmed + 2017-10-24T14:54:20 info: [example.com.] DNSSEC, signing zone + 2017-10-24T14:54:20 info: [example.com.] DNSSEC, key, tag 34608, algorithm ECDSAP256SHA256, KSK, public, active + 2017-10-24T14:54:20 info: [example.com.] DNSSEC, key, tag 13674, algorithm ECDSAP256SHA256, public, active + 2017-10-24T14:54:20 info: [example.com.] DNSSEC, key, tag 65225, algorithm RSASHA256, KSK, public, active + 2017-10-24T14:54:20 info: [example.com.] DNSSEC, key, tag 47014, algorithm RSASHA256, public, active + 2017-10-24T14:54:20 info: [example.com.] DNSSEC, signing started + 2017-10-24T14:54:21 info: [example.com.] DNSSEC, zone is up-to-date + 2017-10-24T14:54:21 info: [example.com.] DNSSEC, next signing at 2017-10-24T14:54:30 + ... + 2017-10-24T14:54:30 info: [example.com.] DNSSEC, signing zone + 2017-10-24T14:54:30 info: [example.com.] DNSSEC, key, tag 34608, algorithm ECDSAP256SHA256, KSK, public, active + 2017-10-24T14:54:30 info: [example.com.] DNSSEC, key, tag 13674, algorithm ECDSAP256SHA256, public, active + 2017-10-24T14:54:30 info: [example.com.] DNSSEC, key, tag 65225, algorithm RSASHA256, KSK + 2017-10-24T14:54:30 info: [example.com.] DNSSEC, key, tag 47014, algorithm RSASHA256, active + 2017-10-24T14:54:30 info: [example.com.] DNSSEC, signing started + 2017-10-24T14:54:30 info: [example.com.] DNSSEC, successfully signed + 2017-10-24T14:54:30 info: [example.com.] DNSSEC, next signing at 2017-10-24T14:54:40 + ... + 2017-10-24T14:54:40 info: [example.com.] DNSSEC, signing zone + 2017-10-24T14:54:40 info: [example.com.] DNSSEC, key, tag 34608, algorithm ECDSAP256SHA256, KSK, public, active + 2017-10-24T14:54:40 info: [example.com.] DNSSEC, key, tag 13674, algorithm ECDSAP256SHA256, public, active + 2017-10-24T14:54:40 info: [example.com.] DNSSEC, signing started + 2017-10-24T14:54:40 info: [example.com.] DNSSEC, successfully signed + 2017-10-24T14:54:40 info: [example.com.] DNSSEC, next signing at 2017-10-31T13:53:26 + +.. _DNSSEC Shared KSK: + +DNSSEC shared KSK +================= + +Knot DNS allows, with automatic DNSSEC key management, to configure a shared KSK for multiple zones. +By enabling :ref:`policy_ksk-shared`, we tell Knot to share all newly-created KSKs +among all the zones with the same :ref:`DNSSEC signing policy<Policy section>` assigned. + +The feature works as follows. Each zone still manages its keys separately. If a new KSK shall be +generated for the zone, it first checks if it can grab another zone's shared KSK instead - +that is the last generated KSK in any of the zones with the same policy assigned. +Anyway, only the cryptographic material is shared, the key may have different timers +in each zone. + +.. rubric:: Consequences: + +If we have an initial setting with brand new zones without any DNSSEC keys, +the initial keys for all zones are generated. With shared KSK, they will all have the same KSK, +but different ZSKs. The KSK rollovers may take place at slightly different time for each of the zones, +but the resulting new KSK will be shared again among all of them. + +If we have zones already having their keys, turning on the shared KSK feature triggers no action. +But when a KSK rollover takes place, they will use the same new key afterwards. + +.. _DNSSEC Delete algorithm: + +DNSSEC delete algorithm +======================= + +This is a way how to "disconnect" a signed zone from DNSSEC-aware parent zone. +More precisely, we tell the parent zone to remove our zone's DS record by +publishing a special formatted CDNSKEY and CDS record. This is mostly useful +if we want to turn off DNSSEC on our zone so it becomes insecure, but not bogus. + +With automatic DNSSEC signing and key management by Knot, this is as easy as +configuring :ref:`policy_cds-cdnskey-publish` option and reloading the configuration. +We check if the special CDNSKEY and CDS records with the rdata "0 3 0 AA==" and "0 0 0 00", +respectively, appeared in the zone. + +After the parent zone notices and reflects the change, we wait for TTL expire +(so all resolvers' caches get updated), and finally we may do anything with the +zone, e.g. turning off DNSSEC, removing all the keys and signatures as desired. + +.. _DNSSEC Export Import KASP DB: + +Export/import KASP DB +====================== + +If you would like make a backup of your KASP DB or transfer your cryptographic +keys to a different server, +you may utilize the ``mdb_dump`` and ``mdb_load`` tools provided by the +`lmdb-utils <https://packages.ubuntu.com/bionic/lmdb-utils>`_ +package on Ubuntu and Debian or by the `lmdb <https://rpms.remirepo.net/rpmphp/zoom.php?rpm=lmdb>`_ +package on Fedora, CentOS and RHEL. +These tools allow you to convert the contents of any LMDB database to a portable plain text format +which can be imported to any other LMDB database. Note that the `keys` subdirectory of the +:ref:`template_kasp-db` directory containing the \*.pem files has to be copied separately. + +.. NOTE:: + Make sure to freeze DNSSEC events on a running server prior to applying the following + commands to its KASP DB. Use the ``knotc zone-freeze`` and ``knotc zone-thaw`` commands + as described in :ref:`Editing zone file`. + +Use the ``mdb_dump -a`` command with the configured :ref:`template_kasp-db` directory +as an argument to convert the contents of the LMDB database to a portable text format: + +.. code-block:: console + + $ mdb_dump -a /path/to/keys + +Save the output of the command to a text file. You may then import the file +into a different LMDB database using the ``mdb_load -f`` command, supplying the path +to the file and the path to the database directory as arguments: + +.. code-block:: console + + $ mdb_load -f /path/to/dump_file /path/to/keys + +.. NOTE:: + Depending on your use case, it might be necessary to call ``knotc zone-sign`` + (e.g. to immediately sign the zones with the new imported keys) or ``knotc zone-reload`` + (e.g. to refresh DNSSEC signatures generated by the :ref:`geoip module<mod-geoip>`) + after importing new content into the KASP DB of a running server. + +.. _Controlling running daemon: + +Daemon controls +=============== + +Knot DNS was designed to allow server reconfiguration on-the-fly +without interrupting its operation. Thus it is possible to change +both configuration and zone files and also add or remove zones without +restarting the server. This can be done with:: + + $ knotc reload + +If you want to refresh the slave zones, you can do this with:: + + $ knotc zone-refresh + +.. _Statistics: + +Statistics +========== + +The server provides some general statistics and optional query module statistics +(see :ref:`mod-stats<mod-stats>`). + +Server statistics or global module statistics can be shown by:: + + $ knotc stats + $ knotc stats server # Show all server counters + $ knotc stats mod-stats # Show all mod-stats counters + $ knotc stats server.zone-count # Show specific server counter + +Per zone statistics can be shown by:: + + $ knotc zone-stats example.com mod-stats + +To show all supported counters even with 0 value use the force option. + +A simple periodic statistic dumping to a YAML file can also be enabled. See +:ref:`statistics_section` for the configuration details. + +As the statistics data can be accessed over the server control socket, +it is possible to create an arbitrary script (Python is supported at the moment) +which could, for example, publish the data in the JSON format via HTTP(S) +or upload the data to a more efficient time series database. Take a look into +the python folder of the project for these scripts. |