From 69c6a41ffb878ef98c9378ed4b1634a404cfaa7f Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 6 May 2024 02:53:35 +0200 Subject: Adding upstream version 2.7.6. Signed-off-by: Daniel Baumann --- doc/reference.rst | 1558 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1558 insertions(+) create mode 100644 doc/reference.rst (limited to 'doc/reference.rst') diff --git a/doc/reference.rst b/doc/reference.rst new file mode 100644 index 0000000..93bca65 --- /dev/null +++ b/doc/reference.rst @@ -0,0 +1,1558 @@ +.. highlight:: none +.. _Configuration Reference: + +*********************** +Configuration Reference +*********************** + +.. _Description: + +Description +=========== + +Configuration files for Knot DNS use simplified YAML format. Simplified means +that not all of the features are supported. + +For the description of configuration items, we have to declare a meaning of +the following symbols: + +- *INT* – Integer +- *STR* – Textual string +- *HEXSTR* – Hexadecimal string (with ``0x`` prefix) +- *BOOL* – Boolean value (``on``/``off`` or ``true``/``false``) +- *TIME* – Number of seconds, an integer with possible time multiplier suffix + (``s`` ~ 1, ``m`` ~ 60, ``h`` ~ 3600 or ``d`` ~ 24 * 3600) +- *SIZE* – Number of bytes, an integer with possible size multiplier suffix + (``B`` ~ 1, ``K`` ~ 1024, ``M`` ~ 1024^2 or ``G`` ~ 1024^3) +- *BASE64* – Base64 encoded string +- *ADDR* – IPv4 or IPv6 address +- *DNAME* – Domain name +- ... – Multi-valued item, order of the values is preserved +- [ ] – Optional value +- \| – Choice + +There are 12 main sections (``module``, ``server``, ``control``, ``log``, +``statistics``, ``keystore``, ``policy``, ``key``, ``acl``, ``remote``, +``template``, and ``zone``) and module sections with the ``mod-`` prefix. +Most of the sections (excluding ``server``, ``control``, and ``statistics``) +are sequences of settings blocks. Each settings block begins with a unique identifier, +which can be used as a reference from other sections (such identifier +must be defined in advance). + +A multi-valued item can be specified either as a YAML sequence:: + + address: [10.0.0.1, 10.0.0.2] + +or as more single-valued items each on an extra line:: + + address: 10.0.0.1 + address: 10.0.0.2 + +If an item value contains spaces or other special characters, it is necessary +to enclose such value within double quotes ``"`` ``"``. + +.. _Comments: + +Comments +======== + +A comment begins with a ``#`` character and is ignored during processing. +Also each configuration section or sequence block allows a permanent +comment using the ``comment`` item which is stored in the server beside the +configuration. + +.. _Includes: + +Includes +======== + +Another configuration file or files, matching a pattern, can be included at +the top level in the current file. If the path is not absolute, then it +is considered to be relative to the current file. The pattern can be +an arbitrary string meeting POSIX *glob* requirements, e.g. dir/\*.conf. +Matching files are processed in sorted order. + +:: + + include: STR + +.. _Module section: + +Module section +============== + +Dynamic modules loading configuration. + +.. NOTE:: + If configured with non-empty ```--with-moduledir=path``` parameter, all + shared modules in this directory will be automatically loaded. + +:: + + module: + - id: STR + file: STR + +.. _module_id: + +id +-- + +A module identifier in the form of the ``mod-`` prefix and module name suffix. + +.. _module_file: + +file +---- + +A path to a shared library file with the module implementation. + +*Default:* ``${libdir}/knot/modules-${version}``/module_name.so +(or ``${path}``/module_name.so if configured with ``--with-moduledir=path``) + +.. WARNING:: + If the path is not absolute, the library is searched in the set of + system directories. See ``man dlopen`` for more details. + +.. _Server section: + +Server section +============== + +General options related to the server. + +:: + + server: + identity: [STR] + version: [STR] + nsid: [STR|HEXSTR] + rundir: STR + user: STR[:STR] + pidfile: STR + udp-workers: INT + tcp-workers: INT + background-workers: INT + async-start: BOOL + tcp-handshake-timeout: TIME + tcp-idle-timeout: TIME + tcp-reply-timeout: TIME + max-tcp-clients: INT + max-udp-payload: SIZE + max-ipv4-udp-payload: SIZE + max-ipv6-udp-payload: SIZE + edns-client-subnet: BOOL + answer-rotation: BOOL + listen: ADDR[@INT] ... + +.. _server_identity: + +identity +-------- + +An identity of the server returned in the response to the query for TXT +record ``id.server.`` or ``hostname.bind.`` in the CHAOS class (:rfc:`4892`). +Set empty value to disable. + +*Default:* FQDN hostname + +.. _server_version: + +version +------- + +A version of the server software returned in the response to the query +for TXT record ``version.server.`` or ``version.bind.`` in the CHAOS +class (:rfc:`4892`). Set empty value to disable. + +*Default:* server version + +.. _server_nsid: + +nsid +---- + +A DNS name server identifier (:rfc:`5001`). Set empty value to disable. + +*Default:* FQDN hostname + +.. _server_rundir: + +rundir +------ + +A path for storing run-time data (PID file, unix sockets, etc.). + +*Default:* ``${localstatedir}/run/knot`` (configured with ``--with-rundir=path``) + +.. _server_user: + +user +---- + +A system user with an optional system group (``user:group``) under which the +server is run after starting and binding to interfaces. Linux capabilities +are employed if supported. + +*Default:* root:root + +.. _server_pidfile: + +pidfile +------- + +A PID file location. + +*Default:* :ref:`rundir`/knot.pid + +.. _server_udp-workers: + +udp-workers +----------- + +A number of UDP workers (threads) used to process incoming queries +over UDP. + +*Default:* auto-estimated optimal value based on the number of online CPUs + +.. _server_tcp-workers: + +tcp-workers +----------- + +A number of TCP workers (threads) used to process incoming queries +over TCP. + +*Default:* auto-estimated optimal value based on the number of online CPUs + +.. _server_background-workers: + +background-workers +------------------ + +A number of workers (threads) used to execute background operations (zone +loading, zone updates, etc.). + +*Default:* auto-estimated optimal value based on the number of online CPUs + +.. _server_async-start: + +async-start +----------- + +If enabled, server doesn't wait for the zones to be loaded and starts +responding immediately with SERVFAIL answers until the zone loads. + +*Default:* off + +.. _server_tcp-handshake-timeout: + +tcp-handshake-timeout +--------------------- + +Maximum time between newly accepted TCP connection and the first query. +This is useful to disconnect inactive connections faster than connections +that already made at least 1 meaningful query. + +*Default:* 5 + +.. _server_tcp-idle-timeout: + +tcp-idle-timeout +---------------- + +Maximum idle time between requests on a TCP connection. This also limits +receiving of a single query, each query must be received in this time limit. + +*Default:* 20 + +.. _server_tcp-reply-timeout: + +tcp-reply-timeout +----------------- + +Maximum time to wait for an outgoing connection or for a reply to an issued +request (SOA, NOTIFY, AXFR...). + +*Default:* 10 + +.. _server_max-tcp-clients: + +max-tcp-clients +--------------- + +A maximum number of TCP clients connected in parallel, set this below the file +descriptor limit to avoid resource exhaustion. + +*Default:* 100 + +.. _server_max-udp-payload: + +max-udp-payload +--------------- + +Maximum EDNS0 UDP payload size default for both IPv4 and IPv6. + +*Default:* 4096 + +.. _server_max-ipv4-udp-payload: + +max-ipv4-udp-payload +-------------------- + +Maximum EDNS0 UDP payload size for IPv4. + +*Default:* 4096 + +.. _server_max-ipv6-udp-payload: + +max-ipv6-udp-payload +-------------------- + +Maximum EDNS0 UDP payload size for IPv6. + +*Default:* 4096 + +.. _server_edns-client-subnet: + +edns-client-subnet +------------------ + +Enable or disable EDNS Client Subnet support. If enabled, responses to queries +containing the EDNS Client Subnet option +always contain a valid EDNS Client Subnet option according to :rfc:`7871`. + +*Default:* off + +.. _server_answer-rotation: + +answer-rotation +--------------- + +Enable or disable sorted-rrset rotation in the answer section of normal replies. +The rotation shift is simply determined by a query ID. + +*Default:* off + +.. _server_listen: + +listen +------ + +One or more IP addresses where the server listens for incoming queries. +Optional port specification (default is 53) can be appended to each address +using ``@`` separator. Use ``0.0.0.0`` for all configured IPv4 addresses or +``::`` for all configured IPv6 addresses. + +*Default:* not set + +.. _Key section: + +Key section +=========== + +Shared TSIG keys used to authenticate communication with the server. + +:: + + key: + - id: DNAME + algorithm: hmac-md5 | hmac-sha1 | hmac-sha224 | hmac-sha256 | hmac-sha384 | hmac-sha512 + secret: BASE64 + +.. _key_id: + +id +-- + +A key name identifier. + +.. NOTE:: + This value MUST be exactly the same as the name of the TSIG key on the + opposite master/slave server(s). + +.. _key_algorithm: + +algorithm +--------- + +A TSIG key algorithm. See +`TSIG Algorithm Numbers `_. + +Possible values: + +- ``hmac-md5`` +- ``hmac-sha1`` +- ``hmac-sha224`` +- ``hmac-sha256`` +- ``hmac-sha384`` +- ``hmac-sha512`` + +*Default:* not set + +.. _key_secret: + +secret +------ + +Shared key secret. + +*Default:* not set + +.. _ACL section: + +ACL section +=========== + +Access control list rule definitions. The ACLs are used to match incoming +connections to allow or deny requested operation (zone transfer request, DDNS +update, etc.). + +:: + + acl: + - id: STR + address: ADDR[/INT] | ADDR-ADDR ... + key: key_id ... + action: notify | transfer | update ... + deny: BOOL + +.. _acl_id: + +id +-- + +An ACL rule identifier. + +.. _acl_address: + +address +------- + +An ordered list of IP addresses, network subnets, or network ranges. The query +must match one of them. Empty value means that address match is not required. + +*Default:* not set + +.. _acl_key: + +key +--- + +An ordered list of :ref:`reference`\ s to TSIG keys. The query must +match one of them. Empty value means that transaction authentication is not used. + +*Default:* not set + +.. _acl_action: + +action +------ + +An ordered list of allowed (or denied) actions. + +Possible values: + +- ``notify`` – Allow incoming notify. +- ``transfer`` – Allow zone transfer. +- ``update`` – Allow zone updates. + +*Default:* not set + +.. _acl_deny: + +deny +---- + +If enabled, instead of allowing, deny the specified :ref:`action`, +:ref:`address`, :ref:`key`, or combination if these +items. If no action is specified, deny all actions. + +*Default:* off + +.. _Control section: + +Control section +=============== + +Configuration of the server control interface. + +:: + + control: + listen: STR + timeout: TIME + +.. _control_listen: + +listen +------ + +A UNIX socket path where the server listens for control commands. + +*Default:* :ref:`rundir`/knot.sock + +.. _control_timeout: + +timeout +------- + +Maximum time the control socket operations can take. Set 0 for infinity. + +*Default:* 5 + +.. _statistics_section: + +Statistics section +================== + +Periodic server statistics dumping. + +:: + + statistics: + timer: TIME + file: STR + append: BOOL + +.. _statistics_timer: + +timer +----- + +A period after which all available statistics metrics will by written to the +:ref:`file`. + +*Default:* not set + +.. _statistics_file: + +file +---- + +A file path of statistics output in the YAML format. + +*Default:* :ref:`rundir`/stats.yaml + +.. _statistics_append: + +append +------ + +If enabled, the output will be appended to the :ref:`file` +instead of file replacement. + +*Default:* off + +.. _Keystore section: + +Keystore section +================ + +DNSSEC keystore configuration. + +:: + + keystore: + - id: STR + backend: pem | pkcs11 + config: STR + +.. _keystore_id: + +id +-- + +A keystore identifier. + + +.. _keystore_backend: + +backend +------- + +A key storage backend type. + +Possible values: + +- ``pem`` – PEM files. +- ``pkcs11`` – PKCS #11 storage. + +*Default:* pem + +.. _keystore_config: + +config +------ + +A backend specific configuration. A directory with PEM files (the path can +be specified as a relative path to :ref:`kasp-db`) or +a configuration string for PKCS #11 storage (` `). + +.. NOTE:: + Example configuration string for PKCS #11:: + + "pkcs11:token=knot;pin-value=1234 /usr/lib64/pkcs11/libsofthsm2.so" + +*Default:* :ref:`kasp-db`/keys + +.. _Submission section: + +Submission section +================== + +Parameters of KSK submission checks. + +:: + + submission: + - id: STR + parent: remote_id ... + check-interval: TIME + timeout: TIME + +.. _submission_id: + +id +-- + +A submission identifier. + +.. _submission_parent: + +parent +------ + +A list of :ref:`references` to parent's DNS servers to be checked for +presence of corresponding DS records in the case of KSK submission. All of them must +have a corresponding DS for the rollover to continue. If none is specified, the +rollover must be pushed forward manually. + +*Default:* not set + +.. TIP:: + A DNSSEC-validating resolver can be set as a parent. + +.. _submission_check-interval: + +check-interval +-------------- + +Interval for periodic checks of DS presence on parent's DNS servers, in the +case of the KSK submission. + +*Default:* 1 hour + +.. _submission_timeout: + +timeout +------- + +After this period, the KSK submission is automatically considered successful, even +if all the checks were negative or no parents are configured. Set 0 for infinity. + +*Default:* 0 + +.. _Policy section: + +Policy section +============== + +DNSSEC policy configuration. + +:: + + policy: + - id: STR + keystore: STR + manual: BOOL + single-type-signing: BOOL + algorithm: rsasha1 | rsasha1-nsec3-sha1 | rsasha256 | rsasha512 | ecdsap256sha256 | ecdsap384sha384 | ed25519 + ksk-size: SIZE + zsk-size: SIZE + ksk-shared: BOOL + dnskey-ttl: TIME + zsk-lifetime: TIME + ksk-lifetime: TIME + propagation-delay: TIME + rrsig-lifetime: TIME + rrsig-refresh: TIME + nsec3: BOOL + nsec3-iterations: INT + nsec3-opt-out: BOOL + nsec3-salt-length: INT + nsec3-salt-lifetime: TIME + ksk-submission: submission_id + cds-cdnskey-publish: none | delete-dnssec | rollover | always + +.. _policy_id: + +id +-- + +A policy identifier. + +.. _policy_keystore: + +keystore +-------- + +A :ref:`reference` to a keystore holding private key material +for zones. A special *default* value can be used for the default keystore settings. + +*Default:* default + +.. _policy_manual: + +manual +------ + +If enabled, automatic key management is not used. + +*Default:* off + +.. _policy_single-type-signing: + +single-type-signing +------------------- + +If enabled, Single-Type Signing Scheme is used in the automatic key management +mode. + +*Default:* off + +.. _policy_algorithm: + +algorithm +--------- + +An algorithm of signing keys and issued signatures. See +`DNSSEC Algorithm Numbers `_. + +Possible values: + +- ``rsasha1`` +- ``rsasha1-nsec3-sha1`` +- ``rsasha256`` +- ``rsasha512`` +- ``ecdsap256sha256`` +- ``ecdsap384sha384`` +- ``ed25519`` + +*Default:* ecdsap256sha256 + +.. NOTE:: + Ed25519 algorithm is only available when compiled with GnuTLS 3.6.0+. + +.. _policy_ksk-size: + +ksk-size +-------- + +A length of newly generated :abbr:`KSK (Key Signing Key)` or +:abbr:`CSK (Combined Signing Key)` keys. + +*Default:* 2048 (rsa*), 256 (ecdsap256), 384 (ecdsap384), 256 (ed25519) + +.. _policy_zsk-size: + +zsk-size +-------- + +A length of newly generated :abbr:`ZSK (Zone Signing Key)` keys. + +*Default:* see default for :ref:`ksk-size` + +.. _policy_ksk-shared: + +ksk-shared +---------- + +If enabled, all zones with this policy assigned will share one KSK. + +*Default:* off + +dnskey-ttl +---------- + +A TTL value for DNSKEY records added into zone apex. + +*Default:* zone SOA TTL + +.. NOTE:: + Has infuence over ZSK key lifetime. + +.. _policy_zsk-lifetime: + +zsk-lifetime +------------ + +A period between ZSK publication and the next rollover initiation. + +*Default:* 30 days + +.. NOTE:: + ZSK key lifetime is also infuenced by propagation-delay and dnskey-ttl + + Zero (aka infinity) value causes no ZSK rollover as a result. + +.. _policy_ksk-lifetime: + +ksk-lifetime +------------ + +A period between KSK publication and the next rollover initiation. + +*Default:* 0 + +.. NOTE:: + KSK key lifetime is also infuenced by propagation-delay, dnskey-ttl, + and KSK submission delay. + + Zero (aka infinity) value causes no KSK rollover as a result. + + This applies for CSK lifetime if single-type-signing is enabled. + +.. _policy_propagation-delay: + +propagation-delay +----------------- + +An extra delay added for each key rollover step. This value should be high +enough to cover propagation of data from the master server to all slaves. + +*Default:* 1 hour + +.. NOTE:: + Has infuence over ZSK key lifetime. + +.. _policy_rrsig-lifetime: + +rrsig-lifetime +-------------- + +A validity period of newly issued signatures. + +*Default:* 14 days + +.. _policy_rrsig-refresh: + +rrsig-refresh +------------- + +A period how long before a signature expiration the signature will be refreshed. + +*Default:* 7 days + +.. _policy_nsec: + +nsec3 +----- + +Specifies if NSEC3 will be used instead of NSEC. + +*Default:* off + +.. _policy_nsec3-iterations: + +nsec3-iterations +---------------- + +A number of additional times the hashing is performed. + +*Default:* 5 + +.. _policy_nsec3-opt-out: + +nsec3-opt-out +------------- + +If set, NSEC3 records won't be created for insecure delegations. +This speeds up the zone signing and reduces overall zone size. + +.. WARNING:: + NSEC3 with the Opt-Out bit set no longer works as a proof of non-existence + in this zone. + +*Default:* off + +.. _policy_nsec3-salt-length: + +nsec3-salt-length +----------------- + +A length of a salt field in octets, which is appended to the original owner +name before hashing. + +*Default:* 8 + +.. _policy_nsec3-salt-lifetime: + +nsec3-salt-lifetime +------------------- + +A validity period of newly issued salt field. + +*Default:* 30 days + +.. _policy_ksk-submission-check: + +ksk-submission +-------------- + +A reference to :ref:`submission` section holding parameters of +KSK submittion checks. + +*Default:* not set + +.. _policy_cds-cdnskey-publish: + +cds-cdnskey-publish +------------------- + +Controls if and how shall the CDS and CDNSKEY be published in the zone. + +.. NOTE:: + This only applies if the zone keys are automatically managed by the server. + +Possible values: + +- ``none`` – Never publish any CDS or CDNSKEY records in the zone. +- ``delete-dnssec`` – Publish special CDS and CDNSKEY records indicating turning off DNSSEC. +- ``rollover`` – Publish CDS and CDNSKEY records only in the submission phase of KSK rollover. +- ``always`` – Always publish CDS and CDNSKEY records for the current KSK. + +*Default:* always + +.. _Remote section: + +Remote section +============== + +Definitions of remote servers for outgoing connections (source of a zone +transfer, target for a notification, etc.). + +:: + + remote: + - id: STR + address: ADDR[@INT] ... + via: ADDR[@INT] ... + key: key_id + +.. _remote_id: + +id +-- + +A remote identifier. + +.. _remote_address: + +address +------- + +An ordered list of destination IP addresses which are used for communication +with the remote server. The addresses are tried in sequence unless the +operation is successful. Optional destination port (default is 53) +can be appended to the address using ``@`` separator. + +*Default:* not set + +.. _remote_via: + +via +--- + +An ordered list of source IP addresses. The first address with the same family +as the destination address is used. Optional source port (default is random) +can be appended to the address using ``@`` separator. + +*Default:* not set + +.. _remote_key: + +key +--- + +A :ref:`reference` to the TSIG key which is used to authenticate +the communication with the remote server. + +*Default:* not set + +.. _Template section: + +Template section +================ + +A template is a shareable zone setting which can be used for configuration of +many zones in one place. A special default template (with the *default* identifier) +can be used for global querying configuration or as an implicit configuration +if a zone doesn't have another template specified. + +:: + + template: + - id: STR + timer-db: STR + max-timer-db-size: SIZE + journal-db: STR + journal-db-mode: robust | asynchronous + max-journal-db-size: SIZE + kasp-db: STR + max-kasp-db-size: SIZE + global-module: STR/STR ... + # All zone options (excluding 'template' item) + +.. _template_id: + +id +-- + +A template identifier. + +.. _template_timer-db: + +timer-db +-------- + +Specifies a path of the persistent timer database. The path can be specified +as a relative path to the *default* template :ref:`storage`. + +.. NOTE:: + This option is only available in the *default* template. + +*Default:* :ref:`storage`/timers + +.. _template_max-timer-db-size: + +max-timer-db-size +----------------- + +Hard limit for the timer database maximum size. + +.. NOTE:: + This option is only available in the *default* template. + +*Default:* 100 MiB + +.. _template_journal-db: + +journal-db +---------- + +Specifies a path of the persistent journal database. The path can be specified +as a relative path to the *default* template :ref:`storage`. + +.. NOTE:: + This option is only available in the *default* template. + +*Default:* :ref:`storage`/journal + +.. _template_journal-db-mode: + +journal-db-mode +--------------- + +Specifies journal LMDB backend configuration, which influences performance +and durability. + +Possible values: + +- ``robust`` – The journal DB disk sychronization ensures DB durability but is + generally slower. +- ``asynchronous`` – The journal DB disk synchronization is optimized for + better performance at the expense of lower DB durability; this mode is + recommended only on slave nodes with many zones. + +.. NOTE:: + This option is only available in the *default* template. + +*Default:* robust + +.. _template_max-journal-db-size: + +max-journal-db-size +------------------- + +Hard limit for the common journal DB. There is no cleanup logic in journal +to recover from reaching this limit: journal simply starts refusing changes +across all zones. Decreasing this value has no effect if lower than actual +DB file size. + +It is recommended to limit :ref:`max-journal-usage` +per-zone instead of max-journal-size in most cases. Please keep this value +larger than the sum of all zones' journal usage limits. See more details +regarding :ref:`journal behaviour`. + +This value also influences server's usage of virtual memory. + +.. NOTE:: + This option is only available in the *default* template. + +*Default:* 20 GiB (1 GiB for 32-bit) + +.. _template_kasp-db: + +kasp-db +------- + +A KASP database path. Non-absolute path is relative to +:ref:`storage`. + +*Default:* :ref:`storage`/keys + +.. NOTE:: + This option is only available in the *default* template. + +.. _template_max-kasp-db-size: + +max-kasp-db-size +---------------- + +Hard limit for the KASP database maximum size. + +.. NOTE:: + This option is only available in the *default* template. + +*Default:* 500 MiB + +.. _template_global-module: + +global-module +------------- + +An ordered list of references to query modules in the form of *module_name* or +*module_name/module_id*. These modules apply to all queries. + +.. NOTE:: + This option is only available in the *default* template. + +*Default:* not set + +.. _Zone section: + +Zone section +============ + +Definition of zones served by the server. + +:: + + zone: + - domain: DNAME + template: template_id + storage: STR + file: STR + master: remote_id ... + ddns-master: remote_id + notify: remote_id ... + acl: acl_id ... + semantic-checks: BOOL + disable-any: BOOL + zonefile-sync: TIME + zonefile-load: none | difference | difference-no-serial | whole + journal-content: none | changes | all + max-journal-usage: SIZE + max-journal-depth: INT + max-zone-size : SIZE + dnssec-signing: BOOL + dnssec-policy: STR + request-edns-option: INT:[HEXSTR] + serial-policy: increment | unixtime | dateserial + min-refresh-interval: TIME + max-refresh-interval: TIME + module: STR/STR ... + +.. _zone_domain: + +domain +------ + +A zone name identifier. + +.. _zone_template: + +template +-------- + +A :ref:`reference` to a configuration template. + +*Default:* not set or *default* (if the template exists) + +.. _zone_storage: + +storage +------- + +A data directory for storing zone files, journal database, and timers database. + +*Default:* ``${localstatedir}/lib/knot`` (configured with ``--with-storage=path``) + +.. _zone_file: + +file +---- + +A path to the zone file. Non-absolute path is relative to +:ref:`storage`. It is also possible to use the following formatters: + +- ``%c[``\ *N*\ ``]`` or ``%c[``\ *N*\ ``-``\ *M*\ ``]`` – Means the *N*\ th + character or a sequence of characters beginning from the *N*\ th and ending + with the *M*\ th character of the textual zone name (see ``%s``). The + indexes are counted from 0 from the left. All dots (including the terminal + one) are considered. If the character is not available, the formatter has no effect. +- ``%l[``\ *N*\ ``]`` – Means the *N*\ th label of the textual zone name + (see ``%s``). The index is counted from 0 from the right (0 ~ TLD). + If the label is not available, the formatter has no effect. +- ``%s`` – Means the current zone name in the textual representation. + The zone name doesn't include the terminating dot (the result for the root + zone is the empty string!). +- ``%%`` – Means the ``%`` character. + +.. WARNING:: + Beware of special characters which are escaped or encoded in the \\DDD form + where DDD is corresponding decimal ASCII code. + +*Default:* :ref:`storage`/``%s``\ .zone + +.. _zone_master: + +master +------ + +An ordered list of :ref:`references` to zone master servers. + +*Default:* not set + +.. _zone_ddns-master: + +ddns-master +----------- + +A :ref:`reference` to zone primary master server. +If not specified, the first :ref:`master` server is used. + +*Default:* not set + +.. _zone_notify: + +notify +------ + +An ordered list of :ref:`references` to remotes to which notify +message is sent if the zone changes. + +*Default:* not set + +.. _zone_acl: + +acl +--- + +An ordered list of :ref:`references` to ACL rules which can allow +or disallow zone transfers, updates or incoming notifies. + +*Default:* not set + +.. _zone_semantic-checks: + +semantic-checks +--------------- + +If enabled, extra zone semantic checks are turned on. + +Several checks are enabled by default and cannot be turned off. An error in +mandatory checks causes zone not to be loaded. An error in extra checks is +logged only. + +Mandatory checks: + +- SOA record missing in the zone (:rfc:`1034`) +- An extra record together with CNAME record except for RRSIG and DS (:rfc:`1034`) +- Multiple CNAME record with the same owner +- DNAME record having a record under it (:rfc:`2672`) + +Extra checks: + +- Missing NS record at the zone apex +- Missing glue A or AAAA record +- Invalid DNSKEY, DS, or NSEC3PARAM record +- CDS or CDNSKEY inconsistency +- Missing, invalid, or unverifiable RRSIG record +- Invalid NSEC(3) record +- Broken or non-cyclic NSEC(3) chain + +*Default:* off + +.. _zone_disable-any: + +disable-any +----------- + +If enabled, all authoritative ANY queries sent over UDP will be answered +with an empty response and with the TC bit set. Use this option to minimize +the risk of DNS reflection attack. + +*Default:* off + +.. _zone_zonefile-sync: + +zonefile-sync +------------- + +The time after which the current zone in memory will be synced with a zone file +on the disk (see :ref:`file`). The server will serve the latest +zone even after a restart using zone journal, but the zone file on the disk will +only be synced after ``zonefile-sync`` time has expired (or after manual zone +flush). This is applicable when the zone is updated via IXFR, DDNS or automatic +DNSSEC signing. In order to completely disable automatic zone file synchronization, +set the value to -1. In that case, it is still possible to force a manual zone flush +using the ``-f`` option. + +.. NOTE:: + If you are serving large zones with frequent updates where + the immediate sync with a zone file is not desirable, increase the value. + +*Default:* 0 (immediate) + +.. _zone_zonefile-load: + +zonefile-load +------------- + +Selects how the zone file contents are applied during zone load. + +Possible values: + +- ``none`` – The zone file is not used at all. +- ``difference`` – If the zone contents are already available during server start or reload, + the difference is computed between them and the contents of the zone file. This difference + is then checked for semantic errors and + applied to the current zone contents. +- ``difference-no-serial`` – Same as ``difference``, but the SOA serial in the zone file is + ignored, the server takes care of incrementing the serial automatically. +- ``whole`` – Zone contents are loaded from the zone file. + +When ``difference`` is configured and there are no zone contents yet (cold start of Knot +and no zone contents in journal), it behaves the same way like ``whole``. + +*Default:* whole + +.. _zone_journal-content: + +journal-content +--------------- + +Selects how the journal shall be used to store zone and its changes. + +Possible values: + +- ``none`` – The journal is not used at all. +- ``changes`` – Zone changes history is stored in journal. +- ``all`` – Zone contents and history is stored in journal. + +*Default:* changes + +.. _zone_max-journal-usage: + +max-journal-usage +----------------- + +Policy how much space in journal DB will the zone's journal occupy. + +*Default:* 100 MiB + +.. NOTE:: + Journal DB may grow far above the sum of max-journal-usage across + all zones, because of DB free space fragmentation. + +.. _zone_max_journal_depth: + +max-journal-depth +----------------- + +Maximum history length of journal. + +*Minimum:* 2 + +*Default:* 2^64 + +.. _zone_max_zone_size: + +max-zone-size +------------- + +Maximum size of the zone. The size is measured as size of the zone records +in wire format without compression. The limit is enforced for incoming zone +transfers and dynamic updates. + +For incremental transfers (IXFR), the effective limit for the total size of +the records in the transfer is twice the configured value. However the final +size of the zone must satisfy the configured value. + +*Default:* 2^64 + +.. _zone_dnssec-signing: + +dnssec-signing +-------------- + +If enabled, automatic DNSSEC signing for the zone is turned on. + +*Default:* off + +.. _zone_dnssec-policy: + +dnssec-policy +------------- + +A :ref:`reference` to DNSSEC signing policy. A special *default* +value can be used for the default policy settings. + +*Required* + +.. _zone_request_edns_option: + +request-edns-option +------------------- + +An arbitrary EDNS0 option which is included into a server request (AXFR, IXFR, +SOA, or NOTIFY). The value is in the option_code:option_data format. + +*Default:* not set + +.. _zone_serial-policy: + +serial-policy +------------- + +Specifies how the zone serial is updated after a dynamic update or +automatic DNSSEC signing. If the serial is changed by the dynamic update, +no change is made. + +Possible values: + +- ``increment`` – The serial is incremented according to serial number arithmetic. +- ``unixtime`` – The serial is set to the current unix time. +- ``dateserial`` – The 10-digit serial (YYYYMMDDnn) is incremented, the first + 8 digits match the current iso-date. + +.. NOTE:: + In case of ``unixtime``, if the resulting serial is lower or equal than current zone + (this happens e.g. in case of migrating from other policy or frequent updates) + the serial is incremented instead. + + Use dateserial only if you expect less than 100 updates per day per zone. + +*Default:* increment + +.. _zone_min-refresh-interval: + +min-refresh-interval +-------------------- + +Forced minimum zone refresh interval to avoid flooding master. + +*Default:* 2 + +.. _zone_max-refresh-interval: + +max-refresh-interval +-------------------- + +Forced maximum zone refresh interval. + +*Default:* not set + +.. _zone_module: + +module +------ + +An ordered list of references to query modules in the form of *module_name* or +*module_name/module_id*. These modules apply only to the current zone queries. + +*Default:* not set + +.. _Logging section: + +Logging section +=============== + +Server can be configured to log to the standard output, standard error +output, syslog (or systemd journal if systemd is enabled) or into an arbitrary +file. + +There are 6 logging severity levels: + +- ``critical`` – Non-recoverable error resulting in server shutdown. +- ``error`` – Recoverable error, action should be taken. +- ``warning`` – Warning that might require user action. +- ``notice`` – Server notice or hint. +- ``info`` – Informational message. +- ``debug`` – Debug messages (must be turned on at compile time). + +In the case of missing log section, ``warning`` or more serious messages +will be logged to both standard error output and syslog. The ``info`` and +``notice`` messages will be logged to standard output. + +:: + + log: + - target: stdout | stderr | syslog | STR + server: critical | error | warning | notice | info | debug + control: critical | error | warning | notice | info | debug + zone: critical | error | warning | notice | info | debug + any: critical | error | warning | notice | info | debug + +.. _log_target: + +target +------ + +A logging output. + +Possible values: + +- ``stdout`` – Standard output. +- ``stderr`` – Standard error output. +- ``syslog`` – Syslog. +- *file\_name* – A specific file. + +.. _log_server: + +server +------ + +Minimum severity level for messages related to general operation of the server +that are logged. + +*Default:* not set + +.. _log_control: + +control +------- + +Minimum severity level for messages related to server control that are logged. + +*Default:* not set + +.. _log_zone: + +zone +---- + +Minimum severity level for messages related to zones that are logged. + +*Default:* not set + +.. _log_any: + +any +--- + +Minimum severity level for all message types that are logged. + +*Default:* not set -- cgit v1.2.3