Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

10 files changed, 1030 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net
new file mode 100644
index 000000000..2f1788111
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net
@@ -0,0 +1,285 @@
+What:		/sys/class/net/<iface>/name_assign_type
+Date:		July 2014
+KernelVersion:	3.17
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the name assignment type. Possible values are:
+		1: enumerated by the kernel, possibly in an unpredictable way
+		2: predictably named by the kernel
+		3: named by userspace
+		4: renamed
+
+What:		/sys/class/net/<iface>/addr_assign_type
+Date:		July 2010
+KernelVersion:	3.2
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the address assignment type. Possible values are:
+		0: permanent address
+		1: randomly generated
+		2: stolen from another device
+		3: set using dev_set_mac_address
+
+What:		/sys/class/net/<iface>/addr_len
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the hardware address size in bytes.
+		Values vary based on the lower-level protocol used by the
+		interface (Ethernet, FDDI, ATM, IEEE 802.15.4...). See
+		include/uapi/linux/if_*.h for actual values.
+
+What:		/sys/class/net/<iface>/address
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Hardware address currently assigned to this interface.
+		Format is a string, e.g: 00:11:22:33:44:55 for an Ethernet MAC
+		address.
+
+What:		/sys/class/net/<bridge iface>/bridge/group_fwd_mask
+Date:		January 2012
+KernelVersion:	3.2
+Contact:	netdev@vger.kernel.org
+Description:
+		Bitmask to allow forwarding of link local frames with address
+		01-80-C2-00-00-0X on a bridge device. Only values that set bits
+		not matching BR_GROUPFWD_RESTRICTED in net/bridge/br_private.h
+		allowed.
+		Default value 0 does not forward any link local frames.
+
+		Restricted bits:
+		0: 01-80-C2-00-00-00 Bridge Group Address used for STP
+		1: 01-80-C2-00-00-01 (MAC Control) 802.3 used for MAC PAUSE
+		2: 01-80-C2-00-00-02 (Link Aggregation) 802.3ad
+
+		Any values not setting these bits can be used. Take special
+		care when forwarding control frames e.g. 802.1X-PAE or LLDP.
+
+What:		/sys/class/net/<iface>/broadcast
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Hardware broadcast address for this interface. Format is a
+		string, e.g: ff:ff:ff:ff:ff:ff for an Ethernet broadcast MAC
+		address.
+
+What:		/sys/class/net/<iface>/carrier
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the current physical link state of the interface.
+		Posssible values are:
+		0: physical link is down
+		1: physical link is up
+
+		Note: some special devices, e.g: bonding and team drivers will
+		allow this attribute to be written to force a link state for
+		operating correctly and designating another fallback interface.
+
+What:		/sys/class/net/<iface>/dev_id
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the device unique identifier. Format is an hexadecimal
+		value. This is used to disambiguate interfaces which might be
+		stacked (e.g: VLAN interfaces) but still have the same MAC
+		address as their parent device.
+
+What:		/sys/class/net/<iface>/dormant
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates whether the interface is in dormant state. Possible
+		values are:
+		0: interface is not dormant
+		1: interface is dormant
+
+		This attribute can be used by supplicant software to signal that
+		the device is not usable unless some supplicant-based
+		authentication is performed (e.g: 802.1x). 'link_mode' attribute
+		will also reflect the dormant state.
+
+What:		/sys/clas/net/<iface>/duplex
+Date:		October 2009
+KernelVersion:	2.6.33
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface latest or current duplex value. Possible
+		values are:
+		half: half duplex
+		full: full duplex
+
+		Note: This attribute is only valid for interfaces that implement
+		the ethtool get_settings method (mostly Ethernet).
+
+What:		/sys/class/net/<iface>/flags
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface flags as a bitmask in hexadecimal. See
+		include/uapi/linux/if.h for a list of all possible values and
+		the flags semantics.
+
+What:		/sys/class/net/<iface>/ifalias
+Date:		September 2008
+KernelVersion:	2.6.28
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates/stores an interface alias name as a string. This can
+		be used for system management purposes.
+
+What:		/sys/class/net/<iface>/ifindex
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the system-wide interface unique index identifier as a
+		decimal number. This attribute is used for mapping an interface
+		identifier to an interface name. It is used throughout the
+		networking stack for specifying the interface specific
+		requests/events.
+
+What:		/sys/class/net/<iface>/iflink
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the system-wide interface unique index identifier a
+		the interface is linked to. Format is decimal. This attribute is
+		used to resolve interfaces chaining, linking and stacking.
+		Physical interfaces have the same 'ifindex' and 'iflink' values.
+
+What:		/sys/class/net/<iface>/link_mode
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface link mode, as a decimal number. This
+		attribute should be used in conjunction with 'dormant' attribute
+		to determine the interface usability. Possible values:
+		0: default link mode
+		1: dormant link mode
+
+What:		/sys/class/net/<iface>/mtu
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface currently configured MTU value, in
+		bytes, and in decimal format. Specific values depends on the
+		lower-level interface protocol used. Ethernet devices will show
+		a 'mtu' attribute value of 1500 unless changed.
+
+What:		/sys/class/net/<iface>/netdev_group
+Date:		January 2011
+KernelVersion:	2.6.39
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface network device group, as a decimal
+		integer. Default value is 0 which corresponds to the initial
+		network devices group. The group can be changed to affect
+		routing decisions (see: net/ipv4/fib_rules and
+		net/ipv6/fib6_rules.c).
+
+What:		/sys/class/net/<iface>/operstate
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface RFC2863 operational state as a string.
+		Possible values are:
+		"unknown", "notpresent", "down", "lowerlayerdown", "testing",
+		"dormant", "up".
+
+What:		/sys/class/net/<iface>/phys_port_id
+Date:		July 2013
+KernelVersion:	3.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface unique physical port identifier within
+		the NIC, as a string.
+
+What:		/sys/class/net/<iface>/phys_port_name
+Date:		March 2015
+KernelVersion:	4.0
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface physical port name within the NIC,
+		as a string.
+
+What:		/sys/class/net/<iface>/speed
+Date:		October 2009
+KernelVersion:	2.6.33
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface latest or current speed value. Value is
+		an integer representing the link speed in Mbits/sec.
+
+		Note: this attribute is only valid for interfaces that implement
+		the ethtool get_settings method (mostly Ethernet ).
+
+What:		/sys/class/net/<iface>/tx_queue_len
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface transmit queue len in number of packets,
+		as an integer value. Value depend on the type of interface,
+		Ethernet network adapters have a default value of 1000 unless
+		configured otherwise
+
+What:		/sys/class/net/<iface>/type
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the interface protocol type as a decimal value. See
+		include/uapi/linux/if_arp.h for all possible values.
+
+What:		/sys/class/net/<iface>/phys_switch_id
+Date:		November 2014
+KernelVersion:	3.19
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the unique physical switch identifier of a switch this
+		port belongs to, as a string.
+
+What:		/sys/class/net/<iface>/phydev
+Date:		May 2017
+KernelVersion:	4.13
+Contact:	netdev@vger.kernel.org
+Description:
+		Symbolic link to the PHY device this network device is attached
+		to.
+
+What:		/sys/class/net/<iface>/carrier_changes
+Date:		Mar 2014
+KernelVersion:	3.15
+Contact:	netdev@vger.kernel.org
+Description:
+		32-bit unsigned integer counting the number of times the link has
+		seen a change from UP to DOWN and vice versa
+
+What:		/sys/class/net/<iface>/carrier_up_count
+Date:		Jan 2018
+KernelVersion:	4.16
+Contact:	netdev@vger.kernel.org
+Description:
+		32-bit unsigned integer counting the number of times the link has
+		been up
+
+What:		/sys/class/net/<iface>/carrier_down_count
+Date:		Jan 2018
+KernelVersion:	4.16
+Contact:	netdev@vger.kernel.org
+Description:
+		32-bit unsigned integer counting the number of times the link has
+		been down
diff --git a/Documentation/ABI/testing/sysfs-class-net-batman-adv b/Documentation/ABI/testing/sysfs-class-net-batman-adv
new file mode 100644
index 000000000..898106849
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-batman-adv
@@ -0,0 +1,30 @@
+
+What:           /sys/class/net/<iface>/batman-adv/elp_interval
+Date:           Feb 2014
+Contact:        Linus Lüssing <linus.luessing@web.de>
+Description:
+                Defines the interval in milliseconds in which batman
+                emits probing packets for neighbor sensing (ELP).
+
+What:           /sys/class/net/<iface>/batman-adv/iface_status
+Date:           May 2010
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
+Description:
+                Indicates the status of <iface> as it is seen by batman.
+
+What:           /sys/class/net/<iface>/batman-adv/mesh_iface
+Date:           May 2010
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
+Description:
+                The /sys/class/net/<iface>/batman-adv/mesh_iface file
+                displays the batman mesh interface this <iface>
+                currently is associated with.
+
+What:           /sys/class/net/<iface>/batman-adv/throughput_override
+Date:           Feb 2014
+Contact:        Antonio Quartulli <a@unstable.cc>
+description:
+                Defines the throughput value to be used by B.A.T.M.A.N. V
+                when estimating the link throughput using this interface.
+                If the value is set to 0 then batman-adv will try to
+                estimate the throughput by itself.
diff --git a/Documentation/ABI/testing/sysfs-class-net-cdc_ncm b/Documentation/ABI/testing/sysfs-class-net-cdc_ncm
new file mode 100644
index 000000000..f7be0e88b
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-cdc_ncm
@@ -0,0 +1,168 @@
+What:		/sys/class/net/<iface>/cdc_ncm/min_tx_pkt
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		The driver will pad NCM Transfer Blocks (NTBs) longer
+		than this to tx_max, allowing the device to receive
+		tx_max sized frames with no terminating short
+		packet. NTBs shorter than this limit are transmitted
+		as-is, without any padding, and are terminated with a
+		short USB packet.
+
+		Padding to tx_max allows the driver to transmit NTBs
+		back-to-back without any interleaving short USB
+		packets.  This reduces the number of short packet
+		interrupts in the device, and represents a tradeoff
+		between USB bus bandwidth and device DMA optimization.
+
+		Set to 0 to pad all frames. Set greater than tx_max to
+		disable all padding.
+
+What:		/sys/class/net/<iface>/cdc_ncm/ndp_to_end
+Date:		Dec 2015
+KernelVersion:	4.5
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Boolean attribute showing the status of the "NDP to
+		end" quirk.  Defaults to 'N', except for devices
+		already known to need it enabled.
+
+		The "NDP to end" quirk makes the driver place the NDP
+		(the packet index table) after the payload.  The NCM
+		specification does not mandate this, but some devices
+		are known to be more restrictive. Write 'Y' to this
+		attribute for temporary testing of a suspect device
+		failing to work with the default driver settings.
+
+		A device entry should be added to the driver if this
+		quirk is found to be required.
+
+What:		/sys/class/net/<iface>/cdc_ncm/rx_max
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		The maximum NTB size for RX.  Cannot exceed the
+		maximum value supported by the device. Must allow at
+		least one max sized datagram plus headers.
+
+		The actual limits are device dependent.  See
+		dwNtbInMaxSize.
+
+		Note: Some devices will silently ignore changes to
+		this value, resulting in oversized NTBs and
+		corresponding framing errors.
+
+What:		/sys/class/net/<iface>/cdc_ncm/tx_max
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		The maximum NTB size for TX.  Cannot exceed the
+		maximum value supported by the device.  Must allow at
+		least one max sized datagram plus headers.
+
+		The actual limits are device dependent.  See
+		dwNtbOutMaxSize.
+
+What:		/sys/class/net/<iface>/cdc_ncm/tx_timer_usecs
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Datagram aggregation timeout in µs. The driver will
+		wait up to 3 times this timeout for more datagrams to
+		aggregate before transmitting an NTB frame.
+
+		Valid range: 5 to 4000000
+
+		Set to 0 to disable aggregation.
+
+The following read-only attributes all represent fields of the
+structure defined in section 6.2.1 "GetNtbParameters" of "Universal
+Serial Bus Communications Class Subclass Specifications for Network
+Control Model Devices" (CDC NCM), Revision 1.0 (Errata 1), November
+24, 2010 from USB Implementers Forum, Inc.  The descriptions are
+quoted from table 6-3 of CDC NCM: "NTB Parameter Structure".
+
+What:		/sys/class/net/<iface>/cdc_ncm/bmNtbFormatsSupported
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Bit 0: 16-bit NTB supported (set to 1)
+		Bit 1: 32-bit NTB supported
+		Bits 2 – 15: reserved (reset to zero; must be ignored by host)
+
+What:		/sys/class/net/<iface>/cdc_ncm/dwNtbInMaxSize
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		IN NTB Maximum Size in bytes
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpInDivisor
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Divisor used for IN NTB Datagram payload alignment
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpInPayloadRemainder
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Remainder used to align input datagram payload within
+		the NTB: (Payload Offset) mod (wNdpInDivisor) =
+		wNdpInPayloadRemainder
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpInAlignment
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		NDP alignment modulus for NTBs on the IN pipe. Shall
+		be a power of 2, and shall be at least 4.
+
+What:		/sys/class/net/<iface>/cdc_ncm/dwNtbOutMaxSize
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		OUT NTB Maximum Size
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpOutDivisor
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		OUT NTB Datagram alignment modulus
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpOutPayloadRemainder
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Remainder used to align output datagram payload
+		offsets within the NTB: Padding, shall be transmitted
+		as zero by function, and ignored by host.  (Payload
+		Offset) mod (wNdpOutDivisor) = wNdpOutPayloadRemainder
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpOutAlignment
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		NDP alignment modulus for use in NTBs on the OUT
+		pipe. Shall be a power of 2, and shall be at least 4.
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNtbOutMaxDatagrams
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Maximum number of datagrams that the host may pack
+		into a single OUT NTB. Zero means that the device
+		imposes no limit.
diff --git a/Documentation/ABI/testing/sysfs-class-net-grcan b/Documentation/ABI/testing/sysfs-class-net-grcan
new file mode 100644
index 000000000..f418c92ca
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-grcan
@@ -0,0 +1,35 @@
+
+What:		/sys/class/net/<iface>/grcan/enable0
+Date:		October 2012
+KernelVersion:	3.8
+Contact:	Andreas Larsson <andreas@gaisler.com>
+Description:
+		Hardware configuration of physical interface 0. This file reads
+		and writes the "Enable 0" bit of the configuration register.
+		Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP
+		core library documentation for details. The default value is 0
+		or set by the module parameter grcan.enable0 and can be read at
+		/sys/module/grcan/parameters/enable0.
+
+What:		/sys/class/net/<iface>/grcan/enable1
+Date:		October 2012
+KernelVersion:	3.8
+Contact:	Andreas Larsson <andreas@gaisler.com>
+Description:
+		Hardware configuration of physical interface 1. This file reads
+		and writes the "Enable 1" bit of the configuration register.
+		Possible values: 0 or 1. See the GRCAN chapter of the GRLIB IP
+		core library documentation for details. The default value is 0
+		or set by the module parameter grcan.enable1 and can be read at
+		/sys/module/grcan/parameters/enable1.
+
+What:		/sys/class/net/<iface>/grcan/select
+Date:		October 2012
+KernelVersion:	3.8
+Contact:	Andreas Larsson <andreas@gaisler.com>
+Description:
+		Configuration of which physical interface to be used. Possible
+		values: 0 or 1. See the GRCAN chapter of the GRLIB IP core
+		library documentation for details. The default value is 0 or is
+		set by the module parameter grcan.select and can be read at
+		/sys/module/grcan/parameters/select.
diff --git a/Documentation/ABI/testing/sysfs-class-net-janz-ican3 b/Documentation/ABI/testing/sysfs-class-net-janz-ican3
new file mode 100644
index 000000000..fdbc03a2b
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-janz-ican3
@@ -0,0 +1,19 @@
+What:		/sys/class/net/<iface>/termination
+Date:		May 2010
+KernelVersion:	2.6.35
+Contact:	Ira W. Snyder <ira.snyder@gmail.com>
+Description:
+		Value representing the can bus termination
+
+		Default: 1 (termination active)
+		Reading: get actual termination state
+		Writing: set actual termination state (0=no termination, 1=termination active)
+
+What:		/sys/class/net/<iface>/fwinfo
+Date:		May 2015
+KernelVersion:	3.19
+Contact:	Andreas Gröger <andreas24groeger@gmail.com>
+Description:
+		Firmware stamp of ican3 module
+		Read-only: 32 byte string identification of the ICAN3 module
+		(known values: "JANZ-ICAN3 ICANOS 1.xx", "JANZ-ICAN3 CAL/CANopen 1.xx")
diff --git a/Documentation/ABI/testing/sysfs-class-net-mesh b/Documentation/ABI/testing/sysfs-class-net-mesh
new file mode 100644
index 000000000..c2b956d44
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-mesh
@@ -0,0 +1,108 @@
+
+What:           /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
+Date:           May 2010
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
+Description:
+                Indicates whether the batman protocol messages of the
+                mesh <mesh_iface> shall be aggregated or not.
+
+What:           /sys/class/net/<mesh_iface>/mesh/<vlan_subdir>/ap_isolation
+Date:           May 2011
+Contact:        Antonio Quartulli <a@unstable.cc>
+Description:
+                Indicates whether the data traffic going from a
+                wireless client to another wireless client will be
+                silently dropped. <vlan_subdir> is empty when referring
+		to the untagged lan.
+
+What:           /sys/class/net/<mesh_iface>/mesh/bonding
+Date:           June 2010
+Contact:        Simon Wunderlich <sw@simonwunderlich.de>
+Description:
+                Indicates whether the data traffic going through the
+                mesh will be sent using multiple interfaces at the
+                same time (if available).
+
+What:           /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance
+Date:           November 2011
+Contact:        Simon Wunderlich <sw@simonwunderlich.de>
+Description:
+                Indicates whether the bridge loop avoidance feature
+                is enabled. This feature detects and avoids loops
+                between the mesh and devices bridged with the soft
+                interface <mesh_iface>.
+
+What:           /sys/class/net/<mesh_iface>/mesh/fragmentation
+Date:           October 2010
+Contact:        Andreas Langer <an.langer@gmx.de>
+Description:
+                Indicates whether the data traffic going through the
+                mesh will be fragmented or silently discarded if the
+                packet size exceeds the outgoing interface MTU.
+
+What:           /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
+Date:           October 2010
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
+Description:
+                Defines the bandwidth which is propagated by this
+                node if gw_mode was set to 'server'.
+
+What:           /sys/class/net/<mesh_iface>/mesh/gw_mode
+Date:           October 2010
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
+Description:
+                Defines the state of the gateway features. Can be
+                either 'off', 'client' or 'server'.
+
+What:           /sys/class/net/<mesh_iface>/mesh/gw_sel_class
+Date:           October 2010
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
+Description:
+                Defines the selection criteria this node will use
+                to choose a gateway if gw_mode was set to 'client'.
+
+What:           /sys/class/net/<mesh_iface>/mesh/hop_penalty
+Date:           Oct 2010
+Contact:        Linus Lüssing <linus.luessing@web.de>
+Description:
+                Defines the penalty which will be applied to an
+                originator message's tq-field on every hop.
+
+What:		/sys/class/net/<mesh_iface>/mesh/isolation_mark
+Date:		Nov 2013
+Contact:	Antonio Quartulli <a@unstable.cc>
+Description:
+		Defines the isolation mark (and its bitmask) which
+		is used to classify clients as "isolated" by the
+		Extended Isolation feature.
+
+What:           /sys/class/net/<mesh_iface>/mesh/multicast_mode
+Date:           Feb 2014
+Contact:        Linus Lüssing <linus.luessing@web.de>
+Description:
+                Indicates whether multicast optimizations are enabled
+                or disabled. If set to zero then all nodes in the
+                mesh are going to use classic flooding for any
+                multicast packet with no optimizations.
+
+What:           /sys/class/net/<mesh_iface>/mesh/network_coding
+Date:           Nov 2012
+Contact:        Martin Hundeboll <martin@hundeboll.net>
+Description:
+                Controls whether Network Coding (using some magic
+                to send fewer wifi packets but still the same
+                content) is enabled or not.
+
+What:           /sys/class/net/<mesh_iface>/mesh/orig_interval
+Date:           May 2010
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
+Description:
+                Defines the interval in milliseconds in which batman
+                sends its protocol messages.
+
+What:           /sys/class/net/<mesh_iface>/mesh/routing_algo
+Date:           Dec 2011
+Contact:        Marek Lindner <mareklindner@neomailbox.ch>
+Description:
+                Defines the routing procotol this mesh instance
+                uses to find the optimal paths through the mesh.
diff --git a/Documentation/ABI/testing/sysfs-class-net-phydev b/Documentation/ABI/testing/sysfs-class-net-phydev
new file mode 100644
index 000000000..6ebabfb27
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-phydev
@@ -0,0 +1,36 @@
+What:		/sys/class/mdio_bus/<bus>/<device>/attached_dev
+Date:		May 2017
+KernelVersion:	4.13
+Contact:	netdev@vger.kernel.org
+Description:
+		Symbolic link to the network device this PHY device is
+		attached to.
+
+What:		/sys/class/mdio_bus/<bus>/<device>/phy_has_fixups
+Date:		February 2014
+KernelVersion:	3.15
+Contact:	netdev@vger.kernel.org
+Description:
+		Boolean value indicating whether the PHY device has
+		any fixups registered against it (phy_register_fixup)
+
+What:		/sys/class/mdio_bus/<bus>/<device>/phy_id
+Date:		November 2012
+KernelVersion:	3.8
+Contact:	netdev@vger.kernel.org
+Description:
+		32-bit hexadecimal value corresponding to the PHY device's OUI,
+		model and revision number.
+
+What:		/sys/class/mdio_bus/<bus>/<device>/phy_interface
+Date:		February 2014
+KernelVersion:	3.15
+Contact:	netdev@vger.kernel.org
+Description:
+		String value indicating the PHY interface, possible
+		values are:.
+		<empty> (not available), mii, gmii, sgmii, tbi, rev-mii,
+		rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
+		xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui,
+		xaui, 10gbase-kr, unknown
+
diff --git a/Documentation/ABI/testing/sysfs-class-net-qmi b/Documentation/ABI/testing/sysfs-class-net-qmi
new file mode 100644
index 000000000..c310db4cc
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-qmi
@@ -0,0 +1,50 @@
+What:		/sys/class/net/<iface>/qmi/raw_ip
+Date:		Dec 2015
+KernelVersion:	4.4
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Boolean.  Default: 'N'
+
+		Set this to 'Y' to change the network device link
+		framing from '802.3' to 'raw-ip'.
+
+		The netdev will change to reflect the link framing
+		mode.  The netdev is an ordinary ethernet device in
+		'802.3' mode, and the driver expects to exchange
+		frames with an ethernet header over the USB link. The
+		netdev is a headerless p-t-p device in 'raw-ip' mode,
+		and the driver expects to echange IPv4 or IPv6 packets
+		without any L2 header over the USB link.
+
+		Userspace is in full control of firmware configuration
+		through the delegation of the QMI protocol. Userspace
+		is responsible for coordination of driver and firmware
+		link framing mode, changing this setting to 'Y' if the
+		firmware is configured for 'raw-ip' mode.
+
+What:		/sys/class/net/<iface>/qmi/add_mux
+Date:		March 2017
+KernelVersion:	4.11
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Unsigned integer.
+
+		Write a number ranging from 1 to 254 to add a qmap mux
+		based network device, supported by recent Qualcomm based
+		modems.
+
+		The network device will be called qmimux.
+
+		Userspace is in charge of managing the qmux network device
+		activation and data stream setup on the modem side by
+		using the proper QMI protocol requests.
+
+What:		/sys/class/net/<iface>/qmi/del_mux
+Date:		March 2017
+KernelVersion:	4.11
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Unsigned integer.
+
+		Write a number ranging from 1 to 254 to delete a previously
+		created qmap mux based network device.
diff --git a/Documentation/ABI/testing/sysfs-class-net-queues b/Documentation/ABI/testing/sysfs-class-net-queues
new file mode 100644
index 000000000..978b76358
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-queues
@@ -0,0 +1,98 @@
+What:		/sys/class/<iface>/queues/rx-<queue>/rps_cpus
+Date:		March 2010
+KernelVersion:	2.6.35
+Contact:	netdev@vger.kernel.org
+Description:
+		Mask of the CPU(s) currently enabled to participate into the
+		Receive Packet Steering packet processing flow for this
+		network device queue. Possible values depend on the number
+		of available CPU(s) in the system.
+
+What:		/sys/class/<iface>/queues/rx-<queue>/rps_flow_cnt
+Date:		April 2010
+KernelVersion:	2.6.35
+Contact:	netdev@vger.kernel.org
+Description:
+		Number of Receive Packet Steering flows being currently
+		processed by this particular network device receive queue.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/tx_timeout
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of transmit timeout events seen by this
+		network interface transmit queue.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/tx_maxrate
+Date:		March 2015
+KernelVersion:	4.1
+Contact:	netdev@vger.kernel.org
+Description:
+		A Mbps max-rate set for the queue, a value of zero means disabled,
+		default is disabled.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/xps_cpus
+Date:		November 2010
+KernelVersion:	2.6.38
+Contact:	netdev@vger.kernel.org
+Description:
+		Mask of the CPU(s) currently enabled to participate into the
+		Transmit Packet Steering packet processing flow for this
+		network device transmit queue. Possible vaules depend on the
+		number of available CPU(s) in the system.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/xps_rxqs
+Date:		June 2018
+KernelVersion:	4.18.0
+Contact:	netdev@vger.kernel.org
+Description:
+		Mask of the receive queue(s) currently enabled to participate
+		into the Transmit Packet Steering packet processing flow for this
+		network device transmit queue. Possible values depend on the
+		number of available receive queue(s) in the network device.
+		Default is disabled.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/hold_time
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the hold time in milliseconds to measure the slack
+		of this particular network device transmit queue.
+		Default value is 1000.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/inflight
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of bytes (objects) in flight on this
+		network device transmit queue.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the current limit of bytes allowed to be queued
+		on this network device transmit queue. This value is clamped
+		to be within the bounds defined by limit_max and limit_min.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_max
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the absolute maximum limit of bytes allowed to be
+		queued on this network device transmit queue. See
+		include/linux/dynamic_queue_limits.h for the default value.
+
+What:		/sys/class/<iface>/queues/tx-<queue>/byte_queue_limits/limit_min
+Date:		November 2011
+KernelVersion:	3.3
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the absolute minimum limit of bytes allowed to be
+		queued on this network device transmit queue. Default value is
+		0.
diff --git a/Documentation/ABI/testing/sysfs-class-net-statistics b/Documentation/ABI/testing/sysfs-class-net-statistics
new file mode 100644
index 000000000..397118de7
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-statistics
@@ -0,0 +1,201 @@
+What:		/sys/class/<iface>/statistics/collisions
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of collisions seen by this network device.
+		This value might not be relevant with all MAC layers.
+
+What:		/sys/class/<iface>/statistics/multicast
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of multicast packets received by this
+		network device.
+
+What:		/sys/class/<iface>/statistics/rx_bytes
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of bytes received by this network device.
+		See the network driver for the exact meaning of when this
+		value is incremented.
+
+What:		/sys/class/<iface>/statistics/rx_compressed
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of compressed packets received by this
+		network device. This value might only be relevant for interfaces
+		that support packet compression (e.g: PPP).
+
+What:		/sys/class/<iface>/statistics/rx_crc_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets received with a CRC (FCS) error
+		by this network device. Note that the specific meaning might
+		depend on the MAC layer used by the interface.
+
+What:		/sys/class/<iface>/statistics/rx_dropped
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets received by the network device
+		but dropped, that are not forwarded to the upper layers for
+		packet processing. See the network driver for the exact
+		meaning of this value.
+
+What:		/sys/class/<iface>/statistics/rx_fifo_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of receive FIFO errors seen by this
+		network device. See the network driver for the exact
+		meaning of this value.
+
+What:		/sys/class/<iface>/statistics/rx_frame_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of received frames with error, such as
+		alignment errors. Note that the specific meaning depends on
+		on the MAC layer protocol used. See the network driver for
+		the exact meaning of this value.
+
+What:		/sys/class/<iface>/statistics/rx_length_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of received error packet with a length
+		error, oversized or undersized. See the network driver for the
+		exact meaning of this value.
+
+What:		/sys/class/<iface>/statistics/rx_missed_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of received packets that have been missed
+		due to lack of capacity in the receive side. See the network
+		driver for the exact meaning of this value.
+
+What:		/sys/class/<iface>/statistics/rx_over_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of received packets that are oversized
+		compared to what the network device is configured to accept
+		(e.g: larger than MTU). See the network driver for the exact
+		meaning of this value.
+
+What:		/sys/class/<iface>/statistics/rx_packets
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the total number of good packets received by this
+		network device.
+
+What:		/sys/class/<iface>/statistics/tx_aborted_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets that have been aborted
+		during transmission by a network device (e.g: because of
+		a medium collision). See the network driver for the exact
+		meaning of this value.
+
+What:		/sys/class/<iface>/statistics/tx_bytes
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of bytes transmitted by a network
+		device. See the network driver for the exact meaning of this
+		value, in particular whether this accounts for all successfully
+		transmitted packets or all packets that have been queued for
+		transmission.
+
+What:		/sys/class/<iface>/statistics/tx_carrier_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets that could not be transmitted
+		because of carrier errors (e.g: physical link down). See the
+		network driver for the exact meaning of this value.
+
+What:		/sys/class/<iface>/statistics/tx_compressed
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of transmitted compressed packets. Note
+		this might only be relevant for devices that support
+		compression (e.g: PPP).
+
+What:		/sys/class/<iface>/statistics/tx_dropped
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets dropped during transmission.
+		See the driver for the exact reasons as to why the packets were
+		dropped.
+
+What:		/sys/class/<iface>/statistics/tx_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets in error during transmission by
+		a network device. See the driver for the exact reasons as to
+		why the packets were dropped.
+
+What:		/sys/class/<iface>/statistics/tx_fifo_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets having caused a transmit
+		FIFO error. See the driver for the exact reasons as to why the
+		packets were dropped.
+
+What:		/sys/class/<iface>/statistics/tx_heartbeat_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets transmitted that have been
+		reported as heartbeat errors. See the driver for the exact
+		reasons as to why the packets were dropped.
+
+What:		/sys/class/<iface>/statistics/tx_packets
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets transmitted by a network
+		device. See the driver for whether this reports the number of all
+		attempted or successful transmissions.
+
+What:		/sys/class/<iface>/statistics/tx_window_errors
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the number of packets not successfully transmitted
+		due to a window collision. The specific meaning depends on the
+		MAC layer used.  On Ethernet this is usually used to report
+		late collisions errors.