Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 262 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power
new file mode 100644
index 000000000..80a00f7b6
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-power
@@ -0,0 +1,262 @@
+What:		/sys/devices/.../power/
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../power directory contains attributes
+		allowing the user space to check and modify some power
+		management related properties of given device.
+
+What:		/sys/devices/.../power/wakeup
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../power/wakeup attribute allows the user
+		space to check if the device is enabled to wake up the system
+		from sleep states, such as the memory sleep state (suspend to
+		RAM) and hibernation (suspend to disk), and to enable or disable
+		it to do that as desired.
+
+		Some devices support "wakeup" events, which are hardware signals
+		used to activate the system from a sleep state.  Such devices
+		have one of the following two values for the sysfs power/wakeup
+		file:
+
+		+ "enabled\n" to issue the events;
+		+ "disabled\n" not to do so;
+
+		In that cases the user space can change the setting represented
+		by the contents of this file by writing either "enabled", or
+		"disabled" to it.
+
+		For the devices that are not capable of generating system wakeup
+		events this file is not present.  In that case the device cannot
+		be enabled to wake up the system from sleep states.
+
+What:		/sys/devices/.../power/control
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../power/control attribute allows the user
+		space to control the run-time power management of the device.
+
+		All devices have one of the following two values for the
+		power/control file:
+
+		+ "auto\n" to allow the device to be power managed at run time;
+		+ "on\n" to prevent the device from being power managed;
+
+		The default for all devices is "auto", which means that they may
+		be subject to automatic power management, depending on their
+		drivers.  Changing this attribute to "on" prevents the driver
+		from power managing the device at run time.  Doing that while
+		the device is suspended causes it to be woken up.
+
+What:		/sys/devices/.../power/async
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../async attribute allows the user space to
+		enable or diasble the device's suspend and resume callbacks to
+		be executed asynchronously (ie. in separate threads, in parallel
+		with the main suspend/resume thread) during system-wide power
+		transitions (eg. suspend to RAM, hibernation).
+
+		All devices have one of the following two values for the
+		power/async file:
+
+		+ "enabled\n" to permit the asynchronous suspend/resume;
+		+ "disabled\n" to forbid it;
+
+		The value of this attribute may be changed by writing either
+		"enabled", or "disabled" to it.
+
+		It generally is unsafe to permit the asynchronous suspend/resume
+		of a device unless it is certain that all of the PM dependencies
+		of the device are known to the PM core.  However, for some
+		devices this attribute is set to "enabled" by bus type code or
+		device drivers and in that cases it should be safe to leave the
+		default value.
+
+What:		/sys/devices/.../power/wakeup_count
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../wakeup_count attribute contains the number
+		of signaled wakeup events associated with the device.  This
+		attribute is read-only.  If the device is not capable to wake up
+		the system from sleep states, this attribute is not present.
+		If the device is not enabled to wake up the system from sleep
+		states, this attribute is empty.
+
+What:		/sys/devices/.../power/wakeup_active_count
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../wakeup_active_count attribute contains the
+		number of times the processing of wakeup events associated with
+		the device was completed (at the kernel level).  This attribute
+		is read-only.  If the device is not capable to wake up the
+		system from sleep states, this attribute is not present.  If
+		the device is not enabled to wake up the system from sleep
+		states, this attribute is empty.
+
+What:		/sys/devices/.../power/wakeup_abort_count
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../wakeup_abort_count attribute contains the
+		number of times the processing of a wakeup event associated with
+		the device might have aborted system transition into a sleep
+		state in progress.  This attribute is read-only.  If the device
+		is not capable to wake up the system from sleep states, this
+		attribute is not present.  If the device is not enabled to wake
+		up the system from sleep states, this attribute is empty.
+
+What:		/sys/devices/.../power/wakeup_expire_count
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../wakeup_expire_count attribute contains the
+		number of times a wakeup event associated with the device has
+		been reported with a timeout that expired.  This attribute is
+		read-only.  If the device is not capable to wake up the system
+		from sleep states, this attribute is not present.  If the
+		device is not enabled to wake up the system from sleep states,
+		this attribute is empty.
+
+What:		/sys/devices/.../power/wakeup_active
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../wakeup_active attribute contains either 1,
+		or 0, depending on whether or not a wakeup event associated with
+		the device is being processed (1).  This attribute is read-only.
+		If the device is not capable to wake up the system from sleep
+		states, this attribute is not present.  If the device is not
+		enabled to wake up the system from sleep states, this attribute
+		is empty.
+
+What:		/sys/devices/.../power/wakeup_total_time_ms
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../wakeup_total_time_ms attribute contains
+		the total time of processing wakeup events associated with the
+		device, in milliseconds.  This attribute is read-only.  If the
+		device is not capable to wake up the system from sleep states,
+		this attribute is not present.  If the device is not enabled to
+		wake up the system from sleep states, this attribute is empty.
+
+What:		/sys/devices/.../power/wakeup_max_time_ms
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../wakeup_max_time_ms attribute contains
+		the maximum time of processing a single wakeup event associated
+		with the device, in milliseconds.  This attribute is read-only.
+		If the device is not capable to wake up the system from sleep
+		states, this attribute is not present.  If the device is not
+		enabled to wake up the system from sleep states, this attribute
+		is empty.
+
+What:		/sys/devices/.../power/wakeup_last_time_ms
+Date:		September 2010
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../wakeup_last_time_ms attribute contains
+		the value of the monotonic clock corresponding to the time of
+		signaling the last wakeup event associated with the device, in
+		milliseconds.  This attribute is read-only.  If the device is
+		not enabled to wake up the system from sleep states, this
+		attribute is not present.  If the device is not enabled to wake
+		up the system from sleep states, this attribute is empty.
+
+What:		/sys/devices/.../power/wakeup_prevent_sleep_time_ms
+Date:		February 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute
+		contains the total time the device has been preventing
+		opportunistic transitions to sleep states from occurring.
+		This attribute is read-only.  If the device is not capable to
+		wake up the system from sleep states, this attribute is not
+		present.  If the device is not enabled to wake up the system
+		from sleep states, this attribute is empty.
+
+What:		/sys/devices/.../power/autosuspend_delay_ms
+Date:		September 2010
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		The /sys/devices/.../power/autosuspend_delay_ms attribute
+		contains the autosuspend delay value (in milliseconds).  Some
+		drivers do not want their device to suspend as soon as it
+		becomes idle at run time; they want the device to remain
+		inactive for a certain minimum period of time first.  That
+		period is called the autosuspend delay.  Negative values will
+		prevent the device from being suspended at run time (similar
+		to writing "on" to the power/control attribute).  Values >=
+		1000 will cause the autosuspend timer expiration to be rounded
+		up to the nearest second.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		attempts to read or write it will yield I/O errors.
+
+What:		/sys/devices/.../power/pm_qos_resume_latency_us
+Date:		March 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../power/pm_qos_resume_latency_us attribute
+		contains the PM QoS resume latency limit for the given device,
+		which is the maximum allowed time it can take to resume the
+		device, after it has been suspended at run time, from a resume
+		request to the moment the device will be ready to process I/O,
+		in microseconds.  If it is equal to 0, however, this means that
+		the PM QoS resume latency may be arbitrary and the special value
+		"n/a" means that user space cannot accept any resume latency at
+		all for the given device.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		it is not present.
+
+		This attribute has no effect on system-wide suspend/resume and
+		hibernation.
+
+What:		/sys/devices/.../power/pm_qos_latency_tolerance_us
+Date:		January 2014
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../power/pm_qos_latency_tolerance_us attribute
+		contains the PM QoS active state latency tolerance limit for the
+		given device in microseconds.  That is the maximum memory access
+		latency the device can suffer without any visible adverse
+		effects on user space functionality.  If that value is the
+		string "any", the latency does not matter to user space at all,
+		but hardware should not be allowed to set the latency tolerance
+		for the device automatically.
+
+		Reading "auto" from this file means that the maximum memory
+		access latency for the device may be determined automatically
+		by the hardware as needed.  Writing "auto" to it allows the
+		hardware to be switched to this mode if there are no other
+		latency tolerance requirements from the kernel side.
+
+		This attribute is only present if the feature controlled by it
+		is supported by the hardware.
+
+		This attribute has no effect on runtime suspend and resume of
+		devices and on system-wide suspend/resume and hibernation.
+
+What:		/sys/devices/.../power/pm_qos_no_power_off
+Date:		September 2012
+Contact:	Rafael J. Wysocki <rjw@rjwysocki.net>
+Description:
+		The /sys/devices/.../power/pm_qos_no_power_off attribute
+		is used for manipulating the PM QoS "no power off" flag.  If
+		set, this flag indicates to the kernel that power should not
+		be removed entirely from the device.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		it is not present.
+
+		This attribute has no effect on system-wide suspend/resume and
+		hibernation.