diff options
| author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 01:02:30 +0000 |
|---|---|---|
| committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 01:02:30 +0000 |
| commit | 76cb841cb886eef6b3bee341a2266c76578724ad (patch) | |
| tree | f5892e5ba6cc11949952a6ce4ecbe6d516d6ce58 /Documentation/arm | |
| parent | Initial commit. (diff) | |
| download | linux-76cb841cb886eef6b3bee341a2266c76578724ad.tar.xz linux-76cb841cb886eef6b3bee341a2266c76578724ad.zip | |
Adding upstream version 4.19.249.upstream/4.19.249upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/arm')
78 files changed, 7332 insertions, 0 deletions
diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX new file mode 100644 index 000000000..b6e69fd37 --- /dev/null +++ b/Documentation/arm/00-INDEX @@ -0,0 +1,50 @@ +00-INDEX + - this file +Booting + - requirements for booting +CCN.txt + - Cache Coherent Network ring-bus and perf PMU driver. +Interrupts + - ARM Interrupt subsystem documentation +IXP4xx + - Intel IXP4xx Network processor. +Netwinder + - Netwinder specific documentation +Porting + - Symbol definitions for porting Linux to a new ARM machine. +Setup + - Kernel initialization parameters on ARM Linux +README + - General ARM documentation +SA1100/ + - SA1100 documentation +Samsung-S3C24XX/ + - S3C24XX ARM Linux Overview +SPEAr/ + - ST SPEAr platform Linux Overview +VFP/ + - Release notes for Linux Kernel Vector Floating Point support code +cluster-pm-race-avoidance.txt + - Algorithm for CPU and Cluster setup/teardown +empeg/ + - Ltd's Empeg MP3 Car Audio Player +firmware.txt + - Secure firmware registration and calling. +kernel_mode_neon.txt + - How to use NEON instructions in kernel mode +kernel_user_helpers.txt + - Helper functions in kernel space made available for userspace. +mem_alignment + - alignment abort handler documentation +memory.txt + - description of the virtual memory layout +nwfpe/ + - NWFPE floating point emulator documentation +swp_emulation + - SWP/SWPB emulation handler/logging description +tcm.txt + - ARM Tightly Coupled Memory +uefi.txt + - [U]EFI configuration and runtime services documentation +vlocks.txt + - Voting locks, low-level mechanism relying on memory system atomic writes. diff --git a/Documentation/arm/Booting b/Documentation/arm/Booting new file mode 100644 index 000000000..259f00af3 --- /dev/null +++ b/Documentation/arm/Booting @@ -0,0 +1,218 @@ + Booting ARM Linux + ================= + +Author: Russell King +Date : 18 May 2002 + +The following documentation is relevant to 2.4.18-rmk6 and beyond. + +In order to boot ARM Linux, you require a boot loader, which is a small +program that runs before the main kernel. The boot loader is expected +to initialise various devices, and eventually call the Linux kernel, +passing information to the kernel. + +Essentially, the boot loader should provide (as a minimum) the +following: + +1. Setup and initialise the RAM. +2. Initialise one serial port. +3. Detect the machine type. +4. Setup the kernel tagged list. +5. Load initramfs. +6. Call the kernel image. + + +1. Setup and initialise RAM +--------------------------- + +Existing boot loaders: MANDATORY +New boot loaders: MANDATORY + +The boot loader is expected to find and initialise all RAM that the +kernel will use for volatile data storage in the system. It performs +this in a machine dependent manner. (It may use internal algorithms +to automatically locate and size all RAM, or it may use knowledge of +the RAM in the machine, or any other method the boot loader designer +sees fit.) + + +2. Initialise one serial port +----------------------------- + +Existing boot loaders: OPTIONAL, RECOMMENDED +New boot loaders: OPTIONAL, RECOMMENDED + +The boot loader should initialise and enable one serial port on the +target. This allows the kernel serial driver to automatically detect +which serial port it should use for the kernel console (generally +used for debugging purposes, or communication with the target.) + +As an alternative, the boot loader can pass the relevant 'console=' +option to the kernel via the tagged lists specifying the port, and +serial format options as described in + + Documentation/admin-guide/kernel-parameters.rst. + + +3. Detect the machine type +-------------------------- + +Existing boot loaders: OPTIONAL +New boot loaders: MANDATORY except for DT-only platforms + +The boot loader should detect the machine type its running on by some +method. Whether this is a hard coded value or some algorithm that +looks at the connected hardware is beyond the scope of this document. +The boot loader must ultimately be able to provide a MACH_TYPE_xxx +value to the kernel. (see linux/arch/arm/tools/mach-types). This +should be passed to the kernel in register r1. + +For DT-only platforms, the machine type will be determined by device +tree. set the machine type to all ones (~0). This is not strictly +necessary, but assures that it will not match any existing types. + +4. Setup boot data +------------------ + +Existing boot loaders: OPTIONAL, HIGHLY RECOMMENDED +New boot loaders: MANDATORY + +The boot loader must provide either a tagged list or a dtb image for +passing configuration data to the kernel. The physical address of the +boot data is passed to the kernel in register r2. + +4a. Setup the kernel tagged list +-------------------------------- + +The boot loader must create and initialise the kernel tagged list. +A valid tagged list starts with ATAG_CORE and ends with ATAG_NONE. +The ATAG_CORE tag may or may not be empty. An empty ATAG_CORE tag +has the size field set to '2' (0x00000002). The ATAG_NONE must set +the size field to zero. + +Any number of tags can be placed in the list. It is undefined +whether a repeated tag appends to the information carried by the +previous tag, or whether it replaces the information in its +entirety; some tags behave as the former, others the latter. + +The boot loader must pass at a minimum the size and location of +the system memory, and root filesystem location. Therefore, the +minimum tagged list should look: + + +-----------+ +base -> | ATAG_CORE | | + +-----------+ | + | ATAG_MEM | | increasing address + +-----------+ | + | ATAG_NONE | | + +-----------+ v + +The tagged list should be stored in system RAM. + +The tagged list must be placed in a region of memory where neither +the kernel decompressor nor initrd 'bootp' program will overwrite +it. The recommended placement is in the first 16KiB of RAM. + +4b. Setup the device tree +------------------------- + +The boot loader must load a device tree image (dtb) into system ram +at a 64bit aligned address and initialize it with the boot data. The +dtb format is documented in Documentation/devicetree/booting-without-of.txt. +The kernel will look for the dtb magic value of 0xd00dfeed at the dtb +physical address to determine if a dtb has been passed instead of a +tagged list. + +The boot loader must pass at a minimum the size and location of the +system memory, and the root filesystem location. The dtb must be +placed in a region of memory where the kernel decompressor will not +overwrite it, whilst remaining within the region which will be covered +by the kernel's low-memory mapping. + +A safe location is just above the 128MiB boundary from start of RAM. + +5. Load initramfs. +------------------ + +Existing boot loaders: OPTIONAL +New boot loaders: OPTIONAL + +If an initramfs is in use then, as with the dtb, it must be placed in +a region of memory where the kernel decompressor will not overwrite it +while also with the region which will be covered by the kernel's +low-memory mapping. + +A safe location is just above the device tree blob which itself will +be loaded just above the 128MiB boundary from the start of RAM as +recommended above. + +6. Calling the kernel image +--------------------------- + +Existing boot loaders: MANDATORY +New boot loaders: MANDATORY + +There are two options for calling the kernel zImage. If the zImage +is stored in flash, and is linked correctly to be run from flash, +then it is legal for the boot loader to call the zImage in flash +directly. + +The zImage may also be placed in system RAM and called there. The +kernel should be placed in the first 128MiB of RAM. It is recommended +that it is loaded above 32MiB in order to avoid the need to relocate +prior to decompression, which will make the boot process slightly +faster. + +When booting a raw (non-zImage) kernel the constraints are tighter. +In this case the kernel must be loaded at an offset into system equal +to TEXT_OFFSET - PAGE_OFFSET. + +In any case, the following conditions must be met: + +- Quiesce all DMA capable devices so that memory does not get + corrupted by bogus network packets or disk data. This will save + you many hours of debug. + +- CPU register settings + r0 = 0, + r1 = machine type number discovered in (3) above. + r2 = physical address of tagged list in system RAM, or + physical address of device tree block (dtb) in system RAM + +- CPU mode + All forms of interrupts must be disabled (IRQs and FIQs) + + For CPUs which do not include the ARM virtualization extensions, the + CPU must be in SVC mode. (A special exception exists for Angel) + + CPUs which include support for the virtualization extensions can be + entered in HYP mode in order to enable the kernel to make full use of + these extensions. This is the recommended boot method for such CPUs, + unless the virtualisations are already in use by a pre-installed + hypervisor. + + If the kernel is not entered in HYP mode for any reason, it must be + entered in SVC mode. + +- Caches, MMUs + The MMU must be off. + Instruction cache may be on or off. + Data cache must be off. + + If the kernel is entered in HYP mode, the above requirements apply to + the HYP mode configuration in addition to the ordinary PL1 (privileged + kernel modes) configuration. In addition, all traps into the + hypervisor must be disabled, and PL1 access must be granted for all + peripherals and CPU resources for which this is architecturally + possible. Except for entering in HYP mode, the system configuration + should be such that a kernel which does not include support for the + virtualization extensions can boot correctly without extra help. + +- The boot loader is expected to call the kernel image by jumping + directly to the first instruction of the kernel image. + + On CPUs supporting the ARM instruction set, the entry must be + made in ARM state, even for a Thumb-2 kernel. + + On CPUs supporting only the Thumb instruction set such as + Cortex-M class CPUs, the entry must be made in Thumb state. diff --git a/Documentation/arm/IXP4xx b/Documentation/arm/IXP4xx new file mode 100644 index 000000000..e48b74de6 --- /dev/null +++ b/Documentation/arm/IXP4xx @@ -0,0 +1,172 @@ + +------------------------------------------------------------------------- +Release Notes for Linux on Intel's IXP4xx Network Processor + +Maintained by Deepak Saxena <dsaxena@plexity.net> +------------------------------------------------------------------------- + +1. Overview + +Intel's IXP4xx network processor is a highly integrated SOC that +is targeted for network applications, though it has become popular +in industrial control and other areas due to low cost and power +consumption. The IXP4xx family currently consists of several processors +that support different network offload functions such as encryption, +routing, firewalling, etc. The IXP46x family is an updated version which +supports faster speeds, new memory and flash configurations, and more +integration such as an on-chip I2C controller. + +For more information on the various versions of the CPU, see: + + http://developer.intel.com/design/network/products/npfamily/ixp4xx.htm + +Intel also made the IXCP1100 CPU for sometime which is an IXP4xx +stripped of much of the network intelligence. + +2. Linux Support + +Linux currently supports the following features on the IXP4xx chips: + +- Dual serial ports +- PCI interface +- Flash access (MTD/JFFS) +- I2C through GPIO on IXP42x +- GPIO for input/output/interrupts + See arch/arm/mach-ixp4xx/include/mach/platform.h for access functions. +- Timers (watchdog, OS) + +The following components of the chips are not supported by Linux and +require the use of Intel's proprietary CSR software: + +- USB device interface +- Network interfaces (HSS, Utopia, NPEs, etc) +- Network offload functionality + +If you need to use any of the above, you need to download Intel's +software from: + + http://developer.intel.com/design/network/products/npfamily/ixp425.htm + +DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPRIETARY +SOFTWARE. + +There are several websites that provide directions/pointers on using +Intel's software: + + http://sourceforge.net/projects/ixp4xx-osdg/ + Open Source Developer's Guide for using uClinux and the Intel libraries + +http://gatewaymaker.sourceforge.net/ + Simple one page summary of building a gateway using an IXP425 and Linux + +http://ixp425.sourceforge.net/ + ATM device driver for IXP425 that relies on Intel's libraries + +3. Known Issues/Limitations + +3a. Limited inbound PCI window + +The IXP4xx family allows for up to 256MB of memory but the PCI interface +can only expose 64MB of that memory to the PCI bus. This means that if +you are running with > 64MB, all PCI buffers outside of the accessible +range will be bounced using the routines in arch/arm/common/dmabounce.c. + +3b. Limited outbound PCI window + +IXP4xx provides two methods of accessing PCI memory space: + +1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB). + To access PCI via this space, we simply ioremap() the BAR + into the kernel and we can use the standard read[bwl]/write[bwl] + macros. This is the preffered method due to speed but it + limits the system to just 64MB of PCI memory. This can be + problamatic if using video cards and other memory-heavy devices. + +2) If > 64MB of memory space is required, the IXP4xx can be + configured to use indirect registers to access PCI This allows + for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus. + The disadvantage of this is that every PCI access requires + three local register accesses plus a spinlock, but in some + cases the performance hit is acceptable. In addition, you cannot + mmap() PCI devices in this case due to the indirect nature + of the PCI window. + +By default, the direct method is used for performance reasons. If +you need more PCI memory, enable the IXP4XX_INDIRECT_PCI config option. + +3c. GPIO as Interrupts + +Currently the code only handles level-sensitive GPIO interrupts + +4. Supported platforms + +ADI Engineering Coyote Gateway Reference Platform +http://www.adiengineering.com/productsCoyote.html + + The ADI Coyote platform is reference design for those building + small residential/office gateways. One NPE is connected to a 10/100 + interface, one to 4-port 10/100 switch, and the third to and ADSL + interface. In addition, it also supports to POTs interfaces connected + via SLICs. Note that those are not supported by Linux ATM. Finally, + the platform has two mini-PCI slots used for 802.11[bga] cards. + Finally, there is an IDE port hanging off the expansion bus. + +Gateworks Avila Network Platform +http://www.gateworks.com/support/overview.php + + The Avila platform is basically and IXDP425 with the 4 PCI slots + replaced with mini-PCI slots and a CF IDE interface hanging off + the expansion bus. + +Intel IXDP425 Development Platform +http://www.intel.com/design/network/products/npfamily/ixdpg425.htm + + This is Intel's standard reference platform for the IXDP425 and is + also known as the Richfield board. It contains 4 PCI slots, 16MB + of flash, two 10/100 ports and one ADSL port. + +Intel IXDP465 Development Platform +http://www.intel.com/design/network/products/npfamily/ixdp465.htm + + This is basically an IXDP425 with an IXP465 and 32M of flash instead + of just 16. + +Intel IXDPG425 Development Platform + + This is basically and ADI Coyote board with a NEC EHCI controller + added. One issue with this board is that the mini-PCI slots only + have the 3.3v line connected, so you can't use a PCI to mini-PCI + adapter with an E100 card. So to NFS root you need to use either + the CSR or a WiFi card and a ramdisk that BOOTPs and then does + a pivot_root to NFS. + +Motorola PrPMC1100 Processor Mezanine Card +http://www.fountainsys.com + + The PrPMC1100 is based on the IXCP1100 and is meant to plug into + and IXP2400/2800 system to act as the system controller. It simply + contains a CPU and 16MB of flash on the board and needs to be + plugged into a carrier board to function. Currently Linux only + supports the Motorola PrPMC carrier board for this platform. + +5. TODO LIST + +- Add support for Coyote IDE +- Add support for edge-based GPIO interrupts +- Add support for CF IDE on expansion bus + +6. Thanks + +The IXP4xx work has been funded by Intel Corp. and MontaVista Software, Inc. + +The following people have contributed patches/comments/etc: + +Lennerty Buytenhek +Lutz Jaenicke +Justin Mayfield +Robert E. Ranslam +[I know I've forgotten others, please email me to be added] + +------------------------------------------------------------------------- + +Last Update: 01/04/2005 diff --git a/Documentation/arm/Interrupts b/Documentation/arm/Interrupts new file mode 100644 index 000000000..f09ab1b90 --- /dev/null +++ b/Documentation/arm/Interrupts @@ -0,0 +1,167 @@ +2.5.2-rmk5 +---------- + +This is the first kernel that contains a major shake up of some of the +major architecture-specific subsystems. + +Firstly, it contains some pretty major changes to the way we handle the +MMU TLB. Each MMU TLB variant is now handled completely separately - +we have TLB v3, TLB v4 (without write buffer), TLB v4 (with write buffer), +and finally TLB v4 (with write buffer, with I TLB invalidate entry). +There is more assembly code inside each of these functions, mainly to +allow more flexible TLB handling for the future. + +Secondly, the IRQ subsystem. + +The 2.5 kernels will be having major changes to the way IRQs are handled. +Unfortunately, this means that machine types that touch the irq_desc[] +array (basically all machine types) will break, and this means every +machine type that we currently have. + +Lets take an example. On the Assabet with Neponset, we have: + + GPIO25 IRR:2 + SA1100 ------------> Neponset -----------> SA1111 + IIR:1 + -----------> USAR + IIR:0 + -----------> SMC9196 + +The way stuff currently works, all SA1111 interrupts are mutually +exclusive of each other - if you're processing one interrupt from the +SA1111 and another comes in, you have to wait for that interrupt to +finish processing before you can service the new interrupt. Eg, an +IDE PIO-based interrupt on the SA1111 excludes all other SA1111 and +SMC9196 interrupts until it has finished transferring its multi-sector +data, which can be a long time. Note also that since we loop in the +SA1111 IRQ handler, SA1111 IRQs can hold off SMC9196 IRQs indefinitely. + + +The new approach brings several new ideas... + +We introduce the concept of a "parent" and a "child". For example, +to the Neponset handler, the "parent" is GPIO25, and the "children"d +are SA1111, SMC9196 and USAR. + +We also bring the idea of an IRQ "chip" (mainly to reduce the size of +the irqdesc array). This doesn't have to be a real "IC"; indeed the +SA11x0 IRQs are handled by two separate "chip" structures, one for +GPIO0-10, and another for all the rest. It is just a container for +the various operations (maybe this'll change to a better name). +This structure has the following operations: + +struct irqchip { + /* + * Acknowledge the IRQ. + * If this is a level-based IRQ, then it is expected to mask the IRQ + * as well. + */ + void (*ack)(unsigned int irq); + /* + * Mask the IRQ in hardware. + */ + void (*mask)(unsigned int irq); + /* + * Unmask the IRQ in hardware. + */ + void (*unmask)(unsigned int irq); + /* + * Re-run the IRQ + */ + void (*rerun)(unsigned int irq); + /* + * Set the type of the IRQ. + */ + int (*type)(unsigned int irq, unsigned int, type); +}; + +ack - required. May be the same function as mask for IRQs + handled by do_level_IRQ. +mask - required. +unmask - required. +rerun - optional. Not required if you're using do_level_IRQ for all + IRQs that use this 'irqchip'. Generally expected to re-trigger + the hardware IRQ if possible. If not, may call the handler + directly. +type - optional. If you don't support changing the type of an IRQ, + it should be null so people can detect if they are unable to + set the IRQ type. + +For each IRQ, we keep the following information: + + - "disable" depth (number of disable_irq()s without enable_irq()s) + - flags indicating what we can do with this IRQ (valid, probe, + noautounmask) as before + - status of the IRQ (probing, enable, etc) + - chip + - per-IRQ handler + - irqaction structure list + +The handler can be one of the 3 standard handlers - "level", "edge" and +"simple", or your own specific handler if you need to do something special. + +The "level" handler is what we currently have - its pretty simple. +"edge" knows about the brokenness of such IRQ implementations - that you +need to leave the hardware IRQ enabled while processing it, and queueing +further IRQ events should the IRQ happen again while processing. The +"simple" handler is very basic, and does not perform any hardware +manipulation, nor state tracking. This is useful for things like the +SMC9196 and USAR above. + +So, what's changed? + +1. Machine implementations must not write to the irqdesc array. + +2. New functions to manipulate the irqdesc array. The first 4 are expected + to be useful only to machine specific code. The last is recommended to + only be used by machine specific code, but may be used in drivers if + absolutely necessary. + + set_irq_chip(irq,chip) + + Set the mask/unmask methods for handling this IRQ + + set_irq_handler(irq,handler) + + Set the handler for this IRQ (level, edge, simple) + + set_irq_chained_handler(irq,handler) + + Set a "chained" handler for this IRQ - automatically + enables this IRQ (eg, Neponset and SA1111 handlers). + + set_irq_flags(irq,flags) + + Set the valid/probe/noautoenable flags. + + set_irq_type(irq,type) + + Set active the IRQ edge(s)/level. This replaces the + SA1111 INTPOL manipulation, and the set_GPIO_IRQ_edge() + function. Type should be one of IRQ_TYPE_xxx defined in + <linux/irq.h> + +3. set_GPIO_IRQ_edge() is obsolete, and should be replaced by set_irq_type. + +4. Direct access to SA1111 INTPOL is deprecated. Use set_irq_type instead. + +5. A handler is expected to perform any necessary acknowledgement of the + parent IRQ via the correct chip specific function. For instance, if + the SA1111 is directly connected to a SA1110 GPIO, then you should + acknowledge the SA1110 IRQ each time you re-read the SA1111 IRQ status. + +6. For any child which doesn't have its own IRQ enable/disable controls + (eg, SMC9196), the handler must mask or acknowledge the parent IRQ + while the child handler is called, and the child handler should be the + "simple" handler (not "edge" nor "level"). After the handler completes, + the parent IRQ should be unmasked, and the status of all children must + be re-checked for pending events. (see the Neponset IRQ handler for + details). + +7. fixup_irq() is gone, as is arch/arm/mach-*/include/mach/irq.h + +Please note that this will not solve all problems - some of them are +hardware based. Mixing level-based and edge-based IRQs on the same +parent signal (eg neponset) is one such area where a software based +solution can't provide the full answer to low IRQ latency. + diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README new file mode 100644 index 000000000..56ada27c5 --- /dev/null +++ b/Documentation/arm/Marvell/README @@ -0,0 +1,395 @@ +ARM Marvell SoCs +================ + +This document lists all the ARM Marvell SoCs that are currently +supported in mainline by the Linux kernel. As the Marvell families of +SoCs are large and complex, it is hard to understand where the support +for a particular SoC is available in the Linux kernel. This document +tries to help in understanding where those SoCs are supported, and to +match them with their corresponding public datasheet, when available. + +Orion family +------------ + + Flavors: + 88F5082 + 88F5181 + 88F5181L + 88F5182 + Datasheet : http://www.embeddedarm.com/documentation/third-party/MV88F5182-datasheet.pdf + Programmer's User Guide : http://www.embeddedarm.com/documentation/third-party/MV88F5182-opensource-manual.pdf + User Manual : http://www.embeddedarm.com/documentation/third-party/MV88F5182-usermanual.pdf + 88F5281 + Datasheet : http://www.ocmodshop.com/images/reviews/networking/qnap_ts409u/marvel_88f5281_data_sheet.pdf + 88F6183 + Core: Feroceon 88fr331 (88f51xx) or 88fr531-vd (88f52xx) ARMv5 compatible + Linux kernel mach directory: arch/arm/mach-orion5x + Linux kernel plat directory: arch/arm/plat-orion + +Kirkwood family +--------------- + + Flavors: + 88F6282 a.k.a Armada 300 + Product Brief : http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf + 88F6283 a.k.a Armada 310 + Product Brief : http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf + 88F6190 + Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6190-003_WEB.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf + 88F6192 + Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6192-003_ver1.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf + 88F6182 + 88F6180 + Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6180-003_ver1.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6180_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf + 88F6281 + Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6281-004_ver1.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6281_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf + Homepage: http://www.marvell.com/embedded-processors/kirkwood/ + Core: Feroceon 88fr131 ARMv5 compatible + Linux kernel mach directory: arch/arm/mach-mvebu + Linux kernel plat directory: none + +Discovery family +---------------- + + Flavors: + MV78100 + Product Brief : http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78100-003_WEB.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78100_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf + MV78200 + Product Brief : http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78200-002_WEB.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78200_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf + MV76100 + Not supported by the Linux kernel. + + Core: Feroceon 88fr571-vd ARMv5 compatible + + Linux kernel mach directory: arch/arm/mach-mv78xx0 + Linux kernel plat directory: arch/arm/plat-orion + +EBU Armada family +----------------- + + Armada 370 Flavors: + 88F6710 + 88F6707 + 88F6W11 + Product Brief: http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf + Hardware Spec: http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-datasheet.pdf + Functional Spec: http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-FunctionalSpec-datasheet.pdf + Core: Sheeva ARMv7 compatible PJ4B + + Armada 375 Flavors: + 88F6720 + Product Brief: http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA_375_SoC-01_product_brief.pdf + Core: ARM Cortex-A9 + + Armada 38x Flavors: + 88F6810 Armada 380 + 88F6820 Armada 385 + 88F6828 Armada 388 + Product infos: http://www.marvell.com/embedded-processors/armada-38x/ + Functional Spec: https://marvellcorp.wufoo.com/forms/marvell-armada-38x-functional-specifications/ + Core: ARM Cortex-A9 + + Armada 39x Flavors: + 88F6920 Armada 390 + 88F6928 Armada 398 + Product infos: http://www.marvell.com/embedded-processors/armada-39x/ + Core: ARM Cortex-A9 + + Armada XP Flavors: + MV78230 + MV78260 + MV78460 + NOTE: not to be confused with the non-SMP 78xx0 SoCs + Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf + Functional Spec: http://www.marvell.com/embedded-processors/armada-xp/assets/ARMADA-XP-Functional-SpecDatasheet.pdf + Hardware Specs: + http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78230_OS.PDF + http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78260_OS.PDF + http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78460_OS.PDF + Core: Sheeva ARMv7 compatible Dual-core or Quad-core PJ4B-MP + + Linux kernel mach directory: arch/arm/mach-mvebu + Linux kernel plat directory: none + +EBU Armada family ARMv8 +----------------------- + + Armada 3710/3720 Flavors: + 88F3710 + 88F3720 + Core: ARM Cortex A53 (ARMv8) + + Homepage: http://www.marvell.com/embedded-processors/armada-3700/ + Product Brief: http://www.marvell.com/embedded-processors/assets/PB-88F3700-FNL.pdf + Device tree files: arch/arm64/boot/dts/marvell/armada-37* + + Armada 7K Flavors: + 88F7020 (AP806 Dual + one CP110) + 88F7040 (AP806 Quad + one CP110) + Core: ARM Cortex A72 + + Homepage: http://www.marvell.com/embedded-processors/armada-70xx/ + Product Brief: http://www.marvell.com/embedded-processors/assets/Armada7020PB-Jan2016.pdf + http://www.marvell.com/embedded-processors/assets/Armada7040PB-Jan2016.pdf + Device tree files: arch/arm64/boot/dts/marvell/armada-70* + + Armada 8K Flavors: + 88F8020 (AP806 Dual + two CP110) + 88F8040 (AP806 Quad + two CP110) + Core: ARM Cortex A72 + + Homepage: http://www.marvell.com/embedded-processors/armada-80xx/ + Product Brief: http://www.marvell.com/embedded-processors/assets/Armada8020PB-Jan2016.pdf + http://www.marvell.com/embedded-processors/assets/Armada8040PB-Jan2016.pdf + Device tree files: arch/arm64/boot/dts/marvell/armada-80* + +Avanta family +------------- + + Flavors: + 88F6510 + 88F6530P + 88F6550 + 88F6560 + Homepage : http://www.marvell.com/broadband/ + Product Brief: http://www.marvell.com/broadband/assets/Marvell_Avanta_88F6510_305_060-001_product_brief.pdf + No public datasheet available. + + Core: ARMv5 compatible + + Linux kernel mach directory: no code in mainline yet, planned for the future + Linux kernel plat directory: no code in mainline yet, planned for the future + +Storage family +-------------- + + Armada SP: + 88RC1580 + Product infos: http://www.marvell.com/storage/armada-sp/ + Core: Sheeva ARMv7 comatible Quad-core PJ4C + (not supported in upstream Linux kernel) + +Dove family (application processor) +----------------------------------- + + Flavors: + 88AP510 a.k.a Armada 510 + Product Brief : http://www.marvell.com/application-processors/armada-500/assets/Marvell_Armada510_SoC.pdf + Hardware Spec : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Hardware-Spec.pdf + Functional Spec : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Functional-Spec.pdf + Homepage: http://www.marvell.com/application-processors/armada-500/ + Core: ARMv7 compatible + + Directory: arch/arm/mach-mvebu (DT enabled platforms) + arch/arm/mach-dove (non-DT enabled platforms) + +PXA 2xx/3xx/93x/95x family +-------------------------- + + Flavors: + PXA21x, PXA25x, PXA26x + Application processor only + Core: ARMv5 XScale1 core + PXA270, PXA271, PXA272 + Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_pb.pdf + Design guide : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_design_guide.pdf + Developers manual : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_dev_man.pdf + Specification : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_emts.pdf + Specification update : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_spec_update.pdf + Application processor only + Core: ARMv5 XScale2 core + PXA300, PXA310, PXA320 + PXA 300 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA300_PB_R4.pdf + PXA 310 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA310_PB_R4.pdf + PXA 320 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA320_PB_R4.pdf + Design guide : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Design_Guide.pdf + Developers manual : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Developers_Manual.zip + Specifications : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_EMTS.pdf + Specification Update : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Spec_Update.zip + Reference Manual : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_TavorP_BootROM_Ref_Manual.pdf + Application processor only + Core: ARMv5 XScale3 core + PXA930, PXA935 + Application processor with Communication processor + Core: ARMv5 XScale3 core + PXA955 + Application processor with Communication processor + Core: ARMv7 compatible Sheeva PJ4 core + + Comments: + + * This line of SoCs originates from the XScale family developed by + Intel and acquired by Marvell in ~2006. The PXA21x, PXA25x, + PXA26x, PXA27x, PXA3xx and PXA93x were developed by Intel, while + the later PXA95x were developed by Marvell. + + * Due to their XScale origin, these SoCs have virtually nothing in + common with the other (Kirkwood, Dove, etc.) families of Marvell + SoCs, except with the MMP/MMP2 family of SoCs. + + Linux kernel mach directory: arch/arm/mach-pxa + Linux kernel plat directory: arch/arm/plat-pxa + +MMP/MMP2/MMP3 family (communication processor) +----------------------------------------- + + Flavors: + PXA168, a.k.a Armada 168 + Homepage : http://www.marvell.com/application-processors/armada-100/armada-168.jsp + Product brief : http://www.marvell.com/application-processors/armada-100/assets/pxa_168_pb.pdf + Hardware manual : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_datasheet.pdf + Software manual : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_software_manual.pdf + Specification update : http://www.marvell.com/application-processors/armada-100/assets/ARMADA16x_Spec_update.pdf + Boot ROM manual : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_ref_manual.pdf + App node package : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_app_note_package.pdf + Application processor only + Core: ARMv5 compatible Marvell PJ1 88sv331 (Mohawk) + PXA910/PXA920 + Homepage : http://www.marvell.com/communication-processors/pxa910/ + Product Brief : http://www.marvell.com/communication-processors/pxa910/assets/Marvell_PXA910_Platform-001_PB_final.pdf + Application processor with Communication processor + Core: ARMv5 compatible Marvell PJ1 88sv331 (Mohawk) + PXA688, a.k.a. MMP2, a.k.a Armada 610 + Product Brief : http://www.marvell.com/application-processors/armada-600/assets/armada610_pb.pdf + Application processor only + Core: ARMv7 compatible Sheeva PJ4 88sv581x core + PXA2128, a.k.a. MMP3 (OLPC XO4, Linux support not upstream) + Product Brief : http://www.marvell.com/application-processors/armada/pxa2128/assets/Marvell-ARMADA-PXA2128-SoC-PB.pdf + Application processor only + Core: Dual-core ARMv7 compatible Sheeva PJ4C core + PXA960/PXA968/PXA978 (Linux support not upstream) + Application processor with Communication Processor + Core: ARMv7 compatible Sheeva PJ4 core + PXA986/PXA988 (Linux support not upstream) + Application processor with Communication Processor + Core: Dual-core ARMv7 compatible Sheeva PJ4B-MP core + PXA1088/PXA1920 (Linux support not upstream) + Application processor with Communication Processor + Core: quad-core ARMv7 Cortex-A7 + PXA1908/PXA1928/PXA1936 + Application processor with Communication Processor + Core: multi-core ARMv8 Cortex-A53 + + Comments: + + * This line of SoCs originates from the XScale family developed by + Intel and acquired by Marvell in ~2006. All the processors of + this MMP/MMP2 family were developed by Marvell. + + * Due to their XScale origin, these SoCs have virtually nothing in + common with the other (Kirkwood, Dove, etc.) families of Marvell + SoCs, except with the PXA family of SoCs listed above. + + Linux kernel mach directory: arch/arm/mach-mmp + Linux kernel plat directory: arch/arm/plat-pxa + +Berlin family (Multimedia Solutions) +------------------------------------- + + Flavors: + 88DE3010, Armada 1000 (no Linux support) + Core: Marvell PJ1 (ARMv5TE), Dual-core + Product Brief: http://www.marvell.com.cn/digital-entertainment/assets/armada_1000_pb.pdf + 88DE3005, Armada 1500 Mini + Design name: BG2CD + Core: ARM Cortex-A9, PL310 L2CC + 88DE3006, Armada 1500 Mini Plus + Design name: BG2CDP + Core: Dual Core ARM Cortex-A7 + 88DE3100, Armada 1500 + Design name: BG2 + Core: Marvell PJ4B-MP (ARMv7), Tauros3 L2CC + 88DE3114, Armada 1500 Pro + Design name: BG2Q + Core: Quad Core ARM Cortex-A9, PL310 L2CC + 88DE3214, Armada 1500 Pro 4K + Design name: BG3 + Core: ARM Cortex-A15, CA15 integrated L2CC + 88DE3218, ARMADA 1500 Ultra + Core: ARM Cortex-A53 + + Homepage: https://www.synaptics.com/products/multimedia-solutions + Directory: arch/arm/mach-berlin + + Comments: + + * This line of SoCs is based on Marvell Sheeva or ARM Cortex CPUs + with Synopsys DesignWare (IRQ, GPIO, Timers, ...) and PXA IP (SDHCI, USB, ETH, ...). + + * The Berlin family was acquired by Synaptics from Marvell in 2017. + +CPU Cores +--------- + +The XScale cores were designed by Intel, and shipped by Marvell in the older +PXA processors. Feroceon is a Marvell designed core that developed in-house, +and that evolved into Sheeva. The XScale and Feroceon cores were phased out +over time and replaced with Sheeva cores in later products, which subsequently +got replaced with licensed ARM Cortex-A cores. + + XScale 1 + CPUID 0x69052xxx + ARMv5, iWMMXt + XScale 2 + CPUID 0x69054xxx + ARMv5, iWMMXt + XScale 3 + CPUID 0x69056xxx or 0x69056xxx + ARMv5, iWMMXt + Feroceon-1850 88fr331 "Mohawk" + CPUID 0x5615331x or 0x41xx926x + ARMv5TE, single issue + Feroceon-2850 88fr531-vd "Jolteon" + CPUID 0x5605531x or 0x41xx926x + ARMv5TE, VFP, dual-issue + Feroceon 88fr571-vd "Jolteon" + CPUID 0x5615571x + ARMv5TE, VFP, dual-issue + Feroceon 88fr131 "Mohawk-D" + CPUID 0x5625131x + ARMv5TE, single-issue in-order + Sheeva PJ1 88sv331 "Mohawk" + CPUID 0x561584xx + ARMv5, single-issue iWMMXt v2 + Sheeva PJ4 88sv581x "Flareon" + CPUID 0x560f581x + ARMv7, idivt, optional iWMMXt v2 + Sheeva PJ4B 88sv581x + CPUID 0x561f581x + ARMv7, idivt, optional iWMMXt v2 + Sheeva PJ4B-MP / PJ4C + CPUID 0x562f584x + ARMv7, idivt/idiva, LPAE, optional iWMMXt v2 and/or NEON + +Long-term plans +--------------- + + * Unify the mach-dove/, mach-mv78xx0/, mach-orion5x/ into the + mach-mvebu/ to support all SoCs from the Marvell EBU (Engineering + Business Unit) in a single mach-<foo> directory. The plat-orion/ + would therefore disappear. + + * Unify the mach-mmp/ and mach-pxa/ into the same mach-pxa + directory. The plat-pxa/ would therefore disappear. + +Credits +------- + + Maen Suleiman <maen@marvell.com> + Lior Amsalem <alior@marvell.com> + Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + Andrew Lunn <andrew@lunn.ch> + Nicolas Pitre <nico@fluxnic.net> + Eric Miao <eric.y.miao@gmail.com> diff --git a/Documentation/arm/Microchip/README b/Documentation/arm/Microchip/README new file mode 100644 index 000000000..a366f37d3 --- /dev/null +++ b/Documentation/arm/Microchip/README @@ -0,0 +1,169 @@ +ARM Microchip SoCs (aka AT91) +============================= + + +Introduction +------------ +This document gives useful information about the ARM Microchip SoCs that are +currently supported in Linux Mainline (you know, the one on kernel.org). + +It is important to note that the Microchip (previously Atmel) ARM-based MPU +product line is historically named "AT91" or "at91" throughout the Linux kernel +development process even if this product prefix has completely disappeared from +the official Microchip product name. Anyway, files, directories, git trees, +git branches/tags and email subject always contain this "at91" sub-string. + + +AT91 SoCs +--------- +Documentation and detailed datasheet for each product are available on +the Microchip website: http://www.microchip.com. + + Flavors: + * ARM 920 based SoC + - at91rm9200 + + Datasheet + http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-1768-32-bit-ARM920T-Embedded-Microprocessor-AT91RM9200_Datasheet.pdf + + * ARM 926 based SoCs + - at91sam9260 + + Datasheet + http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6221-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9260_Datasheet.pdf + + - at91sam9xe + + Datasheet + http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6254-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9XE_Datasheet.pdf + + - at91sam9261 + + Datasheet + http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6062-ARM926EJ-S-Microprocessor-SAM9261_Datasheet.pdf + + - at91sam9263 + + Datasheet + http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6249-32-bit-ARM926EJ-S-Embedded-Microprocessor-SAM9263_Datasheet.pdf + + - at91sam9rl + + Datasheet + http://ww1.microchip.com/downloads/en/DeviceDoc/doc6289.pdf + + - at91sam9g20 + + Datasheet + http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001516A.pdf + + - at91sam9g45 family + - at91sam9g45 + - at91sam9g46 + - at91sam9m10 + - at91sam9m11 (device superset) + + Datasheet + http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-6437-32-bit-ARM926-Embedded-Microprocessor-SAM9M11_Datasheet.pdf + + - at91sam9x5 family (aka "The 5 series") + - at91sam9g15 + - at91sam9g25 + - at91sam9g35 + - at91sam9x25 + - at91sam9x35 + + Datasheet (can be considered as covering the whole family) + http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11055-32-bit-ARM926EJ-S-Microcontroller-SAM9X35_Datasheet.pdf + + - at91sam9n12 + + Datasheet + http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001517A.pdf + + * ARM Cortex-A5 based SoCs + - sama5d3 family + - sama5d31 + - sama5d33 + - sama5d34 + - sama5d35 + - sama5d36 (device superset) + + Datasheet + http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-11121-32-bit-Cortex-A5-Microcontroller-SAMA5D3_Datasheet.pdf + + * ARM Cortex-A5 + NEON based SoCs + - sama5d4 family + - sama5d41 + - sama5d42 + - sama5d43 + - sama5d44 (device superset) + + Datasheet + http://ww1.microchip.com/downloads/en/DeviceDoc/60001525A.pdf + + - sama5d2 family + - sama5d21 + - sama5d22 + - sama5d23 + - sama5d24 + - sama5d26 + - sama5d27 (device superset) + - sama5d28 (device superset + environmental monitors) + + Datasheet + http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001476B.pdf + + * ARM Cortex-M7 MCUs + - sams70 family + - sams70j19 + - sams70j20 + - sams70j21 + - sams70n19 + - sams70n20 + - sams70n21 + - sams70q19 + - sams70q20 + - sams70q21 + + - samv70 family + - samv70j19 + - samv70j20 + - samv70n19 + - samv70n20 + - samv70q19 + - samv70q20 + + - samv71 family + - samv71j19 + - samv71j20 + - samv71j21 + - samv71n19 + - samv71n20 + - samv71n21 + - samv71q19 + - samv71q20 + - samv71q21 + + + Datasheet + http://ww1.microchip.com/downloads/en/DeviceDoc/60001527A.pdf + + +Linux kernel information +------------------------ +Linux kernel mach directory: arch/arm/mach-at91 +MAINTAINERS entry is: "ARM/Microchip (AT91) SoC support" + + +Device Tree for AT91 SoCs and boards +------------------------------------ +All AT91 SoCs are converted to Device Tree. Since Linux 3.19, these products +must use this method to boot the Linux kernel. + +Work In Progress statement: +Device Tree files and Device Tree bindings that apply to AT91 SoCs and boards are +considered as "Unstable". To be completely clear, any at91 binding can change at +any time. So, be sure to use a Device Tree Binary and a Kernel Image generated from +the same source tree. +Please refer to the Documentation/devicetree/bindings/ABI.txt file for a +definition of a "Stable" binding/ABI. +This statement will be removed by AT91 MAINTAINERS when appropriate. + +Naming conventions and best practice: +- SoCs Device Tree Source Include files are named after the official name of + the product (at91sam9g20.dtsi or sama5d33.dtsi for instance). +- Device Tree Source Include files (.dtsi) are used to collect common nodes that can be + shared across SoCs or boards (sama5d3.dtsi or at91sam9x5cm.dtsi for instance). + When collecting nodes for a particular peripheral or topic, the identifier have to + be placed at the end of the file name, separated with a "_" (at91sam9x5_can.dtsi + or sama5d3_gmac.dtsi for example). +- board Device Tree Source files (.dts) are prefixed by the string "at91-" so + that they can be identified easily. Note that some files are historical exceptions + to this rule (sama5d3[13456]ek.dts, usb_a9g20.dts or animeo_ip.dts for example). diff --git a/Documentation/arm/Netwinder b/Documentation/arm/Netwinder new file mode 100644 index 000000000..f1b457fbd --- /dev/null +++ b/Documentation/arm/Netwinder @@ -0,0 +1,78 @@ +NetWinder specific documentation +================================ + +The NetWinder is a small low-power computer, primarily designed +to run Linux. It is based around the StrongARM RISC processor, +DC21285 PCI bridge, with PC-type hardware glued around it. + +Port usage +========== + +Min - Max Description +--------------------------- +0x0000 - 0x000f DMA1 +0x0020 - 0x0021 PIC1 +0x0060 - 0x006f Keyboard +0x0070 - 0x007f RTC +0x0080 - 0x0087 DMA1 +0x0088 - 0x008f DMA2 +0x00a0 - 0x00a3 PIC2 +0x00c0 - 0x00df DMA2 +0x0180 - 0x0187 IRDA +0x01f0 - 0x01f6 ide0 +0x0201 Game port +0x0203 RWA010 configuration read +0x0220 - ? SoundBlaster +0x0250 - ? WaveArtist +0x0279 RWA010 configuration index +0x02f8 - 0x02ff Serial ttyS1 +0x0300 - 0x031f Ether10 +0x0338 GPIO1 +0x033a GPIO2 +0x0370 - 0x0371 W83977F configuration registers +0x0388 - ? AdLib +0x03c0 - 0x03df VGA +0x03f6 ide0 +0x03f8 - 0x03ff Serial ttyS0 +0x0400 - 0x0408 DC21143 +0x0480 - 0x0487 DMA1 +0x0488 - 0x048f DMA2 +0x0a79 RWA010 configuration write +0xe800 - 0xe80f ide0/ide1 BM DMA + + +Interrupt usage +=============== + +IRQ type Description +--------------------------- + 0 ISA 100Hz timer + 1 ISA Keyboard + 2 ISA cascade + 3 ISA Serial ttyS1 + 4 ISA Serial ttyS0 + 5 ISA PS/2 mouse + 6 ISA IRDA + 7 ISA Printer + 8 ISA RTC alarm + 9 ISA +10 ISA GP10 (Orange reset button) +11 ISA +12 ISA WaveArtist +13 ISA +14 ISA hda1 +15 ISA + +DMA usage +========= + +DMA type Description +--------------------------- + 0 ISA IRDA + 1 ISA + 2 ISA cascade + 3 ISA WaveArtist + 4 ISA + 5 ISA + 6 ISA + 7 ISA WaveArtist diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS new file mode 100644 index 000000000..4484e0212 --- /dev/null +++ b/Documentation/arm/OMAP/DSS @@ -0,0 +1,362 @@ +OMAP2/3 Display Subsystem +------------------------- + +This is an almost total rewrite of the OMAP FB driver in drivers/video/omap +(let's call it DSS1). The main differences between DSS1 and DSS2 are DSI, +TV-out and multiple display support, but there are lots of small improvements +also. + +The DSS2 driver (omapdss module) is in arch/arm/plat-omap/dss/, and the FB, +panel and controller drivers are in drivers/video/omap2/. DSS1 and DSS2 live +currently side by side, you can choose which one to use. + +Features +-------- + +Working and tested features include: + +- MIPI DPI (parallel) output +- MIPI DSI output in command mode +- MIPI DBI (RFBI) output +- SDI output +- TV output +- All pieces can be compiled as a module or inside kernel +- Use DISPC to update any of the outputs +- Use CPU to update RFBI or DSI output +- OMAP DISPC planes +- RGB16, RGB24 packed, RGB24 unpacked +- YUV2, UYVY +- Scaling +- Adjusting DSS FCK to find a good pixel clock +- Use DSI DPLL to create DSS FCK + +Tested boards include: +- OMAP3 SDP board +- Beagle board +- N810 + +omapdss driver +-------------- + +The DSS driver does not itself have any support for Linux framebuffer, V4L or +such like the current ones, but it has an internal kernel API that upper level +drivers can use. + +The DSS driver models OMAP's overlays, overlay managers and displays in a +flexible way to enable non-common multi-display configuration. In addition to +modelling the hardware overlays, omapdss supports virtual overlays and overlay +managers. These can be used when updating a display with CPU or system DMA. + +omapdss driver support for audio +-------------------------------- +There exist several display technologies and standards that support audio as +well. Hence, it is relevant to update the DSS device driver to provide an audio +interface that may be used by an audio driver or any other driver interested in +the functionality. + +The audio_enable function is intended to prepare the relevant +IP for playback (e.g., enabling an audio FIFO, taking in/out of reset +some IP, enabling companion chips, etc). It is intended to be called before +audio_start. The audio_disable function performs the reverse operation and is +intended to be called after audio_stop. + +While a given DSS device driver may support audio, it is possible that for +certain configurations audio is not supported (e.g., an HDMI display using a +VESA video timing). The audio_supported function is intended to query whether +the current configuration of the display supports audio. + +The audio_config function is intended to configure all the relevant audio +parameters of the display. In order to make the function independent of any +specific DSS device driver, a struct omap_dss_audio is defined. Its purpose +is to contain all the required parameters for audio configuration. At the +moment, such structure contains pointers to IEC-60958 channel status word +and CEA-861 audio infoframe structures. This should be enough to support +HDMI and DisplayPort, as both are based on CEA-861 and IEC-60958. + +The audio_enable/disable, audio_config and audio_supported functions could be +implemented as functions that may sleep. Hence, they should not be called +while holding a spinlock or a readlock. + +The audio_start/audio_stop function is intended to effectively start/stop audio +playback after the configuration has taken place. These functions are designed +to be used in an atomic context. Hence, audio_start should return quickly and be +called only after all the needed resources for audio playback (audio FIFOs, +DMA channels, companion chips, etc) have been enabled to begin data transfers. +audio_stop is designed to only stop the audio transfers. The resources used +for playback are released using audio_disable. + +The enum omap_dss_audio_state may be used to help the implementations of +the interface to keep track of the audio state. The initial state is _DISABLED; +then, the state transitions to _CONFIGURED, and then, when it is ready to +play audio, to _ENABLED. The state _PLAYING is used when the audio is being +rendered. + + +Panel and controller drivers +---------------------------- + +The drivers implement panel or controller specific functionality and are not +usually visible to users except through omapfb driver. They register +themselves to the DSS driver. + +omapfb driver +------------- + +The omapfb driver implements arbitrary number of standard linux framebuffers. +These framebuffers can be routed flexibly to any overlays, thus allowing very +dynamic display architecture. + +The driver exports some omapfb specific ioctls, which are compatible with the +ioctls in the old driver. + +The rest of the non standard features are exported via sysfs. Whether the final +implementation will use sysfs, or ioctls, is still open. + +V4L2 drivers +------------ + +V4L2 is being implemented in TI. + +From omapdss point of view the V4L2 drivers should be similar to framebuffer +driver. + +Architecture +-------------------- + +Some clarification what the different components do: + + - Framebuffer is a memory area inside OMAP's SRAM/SDRAM that contains the + pixel data for the image. Framebuffer has width and height and color + depth. + - Overlay defines where the pixels are read from and where they go on the + screen. The overlay may be smaller than framebuffer, thus displaying only + part of the framebuffer. The position of the overlay may be changed if + the overlay is smaller than the display. + - Overlay manager combines the overlays in to one image and feeds them to + display. + - Display is the actual physical display device. + +A framebuffer can be connected to multiple overlays to show the same pixel data +on all of the overlays. Note that in this case the overlay input sizes must be +the same, but, in case of video overlays, the output size can be different. Any +framebuffer can be connected to any overlay. + +An overlay can be connected to one overlay manager. Also DISPC overlays can be +connected only to DISPC overlay managers, and virtual overlays can be only +connected to virtual overlays. + +An overlay manager can be connected to one display. There are certain +restrictions which kinds of displays an overlay manager can be connected: + + - DISPC TV overlay manager can be only connected to TV display. + - Virtual overlay managers can only be connected to DBI or DSI displays. + - DISPC LCD overlay manager can be connected to all displays, except TV + display. + +Sysfs +----- +The sysfs interface is mainly used for testing. I don't think sysfs +interface is the best for this in the final version, but I don't quite know +what would be the best interfaces for these things. + +The sysfs interface is divided to two parts: DSS and FB. + +/sys/class/graphics/fb? directory: +mirror 0=off, 1=on +rotate Rotation 0-3 for 0, 90, 180, 270 degrees +rotate_type 0 = DMA rotation, 1 = VRFB rotation +overlays List of overlay numbers to which framebuffer pixels go +phys_addr Physical address of the framebuffer +virt_addr Virtual address of the framebuffer +size Size of the framebuffer + +/sys/devices/platform/omapdss/overlay? directory: +enabled 0=off, 1=on +input_size width,height (ie. the framebuffer size) +manager Destination overlay manager name +name +output_size width,height +position x,y +screen_width width +global_alpha global alpha 0-255 0=transparent 255=opaque + +/sys/devices/platform/omapdss/manager? directory: +display Destination display +name +alpha_blending_enabled 0=off, 1=on +trans_key_enabled 0=off, 1=on +trans_key_type gfx-destination, video-source +trans_key_value transparency color key (RGB24) +default_color default background color (RGB24) + +/sys/devices/platform/omapdss/display? directory: +ctrl_name Controller name +mirror 0=off, 1=on +update_mode 0=off, 1=auto, 2=manual +enabled 0=off, 1=on +name +rotate Rotation 0-3 for 0, 90, 180, 270 degrees +timings Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw) + When writing, two special timings are accepted for tv-out: + "pal" and "ntsc" +panel_name +tear_elim Tearing elimination 0=off, 1=on +output_type Output type (video encoder only): "composite" or "svideo" + +There are also some debugfs files at <debugfs>/omapdss/ which show information +about clocks and registers. + +Examples +-------- + +The following definitions have been made for the examples below: + +ovl0=/sys/devices/platform/omapdss/overlay0 +ovl1=/sys/devices/platform/omapdss/overlay1 +ovl2=/sys/devices/platform/omapdss/overlay2 + +mgr0=/sys/devices/platform/omapdss/manager0 +mgr1=/sys/devices/platform/omapdss/manager1 + +lcd=/sys/devices/platform/omapdss/display0 +dvi=/sys/devices/platform/omapdss/display1 +tv=/sys/devices/platform/omapdss/display2 + +fb0=/sys/class/graphics/fb0 +fb1=/sys/class/graphics/fb1 +fb2=/sys/class/graphics/fb2 + +Default setup on OMAP3 SDP +-------------------------- + +Here's the default setup on OMAP3 SDP board. All planes go to LCD. DVI +and TV-out are not in use. The columns from left to right are: +framebuffers, overlays, overlay managers, displays. Framebuffers are +handled by omapfb, and the rest by the DSS. + +FB0 --- GFX -\ DVI +FB1 --- VID1 --+- LCD ---- LCD +FB2 --- VID2 -/ TV ----- TV + +Example: Switch from LCD to DVI +---------------------- + +w=`cat $dvi/timings | cut -d "," -f 2 | cut -d "/" -f 1` +h=`cat $dvi/timings | cut -d "," -f 3 | cut -d "/" -f 1` + +echo "0" > $lcd/enabled +echo "" > $mgr0/display +fbset -fb /dev/fb0 -xres $w -yres $h -vxres $w -vyres $h +# at this point you have to switch the dvi/lcd dip-switch from the omap board +echo "dvi" > $mgr0/display +echo "1" > $dvi/enabled + +After this the configuration looks like: + +FB0 --- GFX -\ -- DVI +FB1 --- VID1 --+- LCD -/ LCD +FB2 --- VID2 -/ TV ----- TV + +Example: Clone GFX overlay to LCD and TV +------------------------------- + +w=`cat $tv/timings | cut -d "," -f 2 | cut -d "/" -f 1` +h=`cat $tv/timings | cut -d "," -f 3 | cut -d "/" -f 1` + +echo "0" > $ovl0/enabled +echo "0" > $ovl1/enabled + +echo "" > $fb1/overlays +echo "0,1" > $fb0/overlays + +echo "$w,$h" > $ovl1/output_size +echo "tv" > $ovl1/manager + +echo "1" > $ovl0/enabled +echo "1" > $ovl1/enabled + +echo "1" > $tv/enabled + +After this the configuration looks like (only relevant parts shown): + +FB0 +-- GFX ---- LCD ---- LCD + \- VID1 ---- TV ---- TV + +Misc notes +---------- + +OMAP FB allocates the framebuffer memory using the standard dma allocator. You +can enable Contiguous Memory Allocator (CONFIG_CMA) to improve the dma +allocator, and if CMA is enabled, you use "cma=" kernel parameter to increase +the global memory area for CMA. + +Using DSI DPLL to generate pixel clock it is possible produce the pixel clock +of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI. + +Rotation and mirroring currently only supports RGB565 and RGB8888 modes. VRFB +does not support mirroring. + +VRFB rotation requires much more memory than non-rotated framebuffer, so you +probably need to increase your vram setting before using VRFB rotation. Also, +many applications may not work with VRFB if they do not pay attention to all +framebuffer parameters. + +Kernel boot arguments +--------------------- + +omapfb.mode=<display>:<mode>[,...] + - Default video mode for specified displays. For example, + "dvi:800x400MR-24@60". See drivers/video/modedb.c. + There are also two special modes: "pal" and "ntsc" that + can be used to tv out. + +omapfb.vram=<fbnum>:<size>[@<physaddr>][,...] + - VRAM allocated for a framebuffer. Normally omapfb allocates vram + depending on the display size. With this you can manually allocate + more or define the physical address of each framebuffer. For example, + "1:4M" to allocate 4M for fb1. + +omapfb.debug=<y|n> + - Enable debug printing. You have to have OMAPFB debug support enabled + in kernel config. + +omapfb.test=<y|n> + - Draw test pattern to framebuffer whenever framebuffer settings change. + You need to have OMAPFB debug support enabled in kernel config. + +omapfb.vrfb=<y|n> + - Use VRFB rotation for all framebuffers. + +omapfb.rotate=<angle> + - Default rotation applied to all framebuffers. + 0 - 0 degree rotation + 1 - 90 degree rotation + 2 - 180 degree rotation + 3 - 270 degree rotation + +omapfb.mirror=<y|n> + - Default mirror for all framebuffers. Only works with DMA rotation. + +omapdss.def_disp=<display> + - Name of default display, to which all overlays will be connected. + Common examples are "lcd" or "tv". + +omapdss.debug=<y|n> + - Enable debug printing. You have to have DSS debug support enabled in + kernel config. + +TODO +---- + +DSS locking + +Error checking +- Lots of checks are missing or implemented just as BUG() + +System DMA update for DSI +- Can be used for RGB16 and RGB24P modes. Probably not for RGB24U (how + to skip the empty byte?) + +OMAP1 support +- Not sure if needed + diff --git a/Documentation/arm/OMAP/README b/Documentation/arm/OMAP/README new file mode 100644 index 000000000..90c6c57d6 --- /dev/null +++ b/Documentation/arm/OMAP/README @@ -0,0 +1,11 @@ +This file contains documentation for running mainline +kernel on omaps. + +KERNEL NEW DEPENDENCIES +v4.3+ Update is needed for custom .config files to make sure + CONFIG_REGULATOR_PBIAS is enabled for MMC1 to work + properly. + +v4.18+ Update is needed for custom .config files to make sure + CONFIG_MMC_SDHCI_OMAP is enabled for all MMC instances + to work in DRA7 and K2G based boards. diff --git a/Documentation/arm/OMAP/omap_pm b/Documentation/arm/OMAP/omap_pm new file mode 100644 index 000000000..4ae915a9f --- /dev/null +++ b/Documentation/arm/OMAP/omap_pm @@ -0,0 +1,154 @@ + +The OMAP PM interface +===================== + +This document describes the temporary OMAP PM interface. Driver +authors use these functions to communicate minimum latency or +throughput constraints to the kernel power management code. +Over time, the intention is to merge features from the OMAP PM +interface into the Linux PM QoS code. + +Drivers need to express PM parameters which: + +- support the range of power management parameters present in the TI SRF; + +- separate the drivers from the underlying PM parameter + implementation, whether it is the TI SRF or Linux PM QoS or Linux + latency framework or something else; + +- specify PM parameters in terms of fundamental units, such as + latency and throughput, rather than units which are specific to OMAP + or to particular OMAP variants; + +- allow drivers which are shared with other architectures (e.g., + DaVinci) to add these constraints in a way which won't affect non-OMAP + systems, + +- can be implemented immediately with minimal disruption of other + architectures. + + +This document proposes the OMAP PM interface, including the following +five power management functions for driver code: + +1. Set the maximum MPU wakeup latency: + (*pdata->set_max_mpu_wakeup_lat)(struct device *dev, unsigned long t) + +2. Set the maximum device wakeup latency: + (*pdata->set_max_dev_wakeup_lat)(struct device *dev, unsigned long t) + +3. Set the maximum system DMA transfer start latency (CORE pwrdm): + (*pdata->set_max_sdma_lat)(struct device *dev, long t) + +4. Set the minimum bus throughput needed by a device: + (*pdata->set_min_bus_tput)(struct device *dev, u8 agent_id, unsigned long r) + +5. Return the number of times the device has lost context + (*pdata->get_dev_context_loss_count)(struct device *dev) + + +Further documentation for all OMAP PM interface functions can be +found in arch/arm/plat-omap/include/mach/omap-pm.h. + + +The OMAP PM layer is intended to be temporary +--------------------------------------------- + +The intention is that eventually the Linux PM QoS layer should support +the range of power management features present in OMAP3. As this +happens, existing drivers using the OMAP PM interface can be modified +to use the Linux PM QoS code; and the OMAP PM interface can disappear. + + +Driver usage of the OMAP PM functions +------------------------------------- + +As the 'pdata' in the above examples indicates, these functions are +exposed to drivers through function pointers in driver .platform_data +structures. The function pointers are initialized by the board-*.c +files to point to the corresponding OMAP PM functions: +.set_max_dev_wakeup_lat will point to +omap_pm_set_max_dev_wakeup_lat(), etc. Other architectures which do +not support these functions should leave these function pointers set +to NULL. Drivers should use the following idiom: + + if (pdata->set_max_dev_wakeup_lat) + (*pdata->set_max_dev_wakeup_lat)(dev, t); + +The most common usage of these functions will probably be to specify +the maximum time from when an interrupt occurs, to when the device +becomes accessible. To accomplish this, driver writers should use the +set_max_mpu_wakeup_lat() function to constrain the MPU wakeup +latency, and the set_max_dev_wakeup_lat() function to constrain the +device wakeup latency (from clk_enable() to accessibility). For +example, + + /* Limit MPU wakeup latency */ + if (pdata->set_max_mpu_wakeup_lat) + (*pdata->set_max_mpu_wakeup_lat)(dev, tc); + + /* Limit device powerdomain wakeup latency */ + if (pdata->set_max_dev_wakeup_lat) + (*pdata->set_max_dev_wakeup_lat)(dev, td); + + /* total wakeup latency in this example: (tc + td) */ + +The PM parameters can be overwritten by calling the function again +with the new value. The settings can be removed by calling the +function with a t argument of -1 (except in the case of +set_max_bus_tput(), which should be called with an r argument of 0). + +The fifth function above, omap_pm_get_dev_context_loss_count(), +is intended as an optimization to allow drivers to determine whether the +device has lost its internal context. If context has been lost, the +driver must restore its internal context before proceeding. + + +Other specialized interface functions +------------------------------------- + +The five functions listed above are intended to be usable by any +device driver. DSPBridge and CPUFreq have a few special requirements. +DSPBridge expresses target DSP performance levels in terms of OPP IDs. +CPUFreq expresses target MPU performance levels in terms of MPU +frequency. The OMAP PM interface contains functions for these +specialized cases to convert that input information (OPPs/MPU +frequency) into the form that the underlying power management +implementation needs: + +6. (*pdata->dsp_get_opp_table)(void) + +7. (*pdata->dsp_set_min_opp)(u8 opp_id) + +8. (*pdata->dsp_get_opp)(void) + +9. (*pdata->cpu_get_freq_table)(void) + +10. (*pdata->cpu_set_freq)(unsigned long f) + +11. (*pdata->cpu_get_freq)(void) + +Customizing OPP for platform +============================ +Defining CONFIG_PM should enable OPP layer for the silicon +and the registration of OPP table should take place automatically. +However, in special cases, the default OPP table may need to be +tweaked, for e.g.: + * enable default OPPs which are disabled by default, but which + could be enabled on a platform + * Disable an unsupported OPP on the platform + * Define and add a custom opp table entry +in these cases, the board file needs to do additional steps as follows: +arch/arm/mach-omapx/board-xyz.c + #include "pm.h" + .... + static void __init omap_xyz_init_irq(void) + { + .... + /* Initialize the default table */ + omapx_opp_init(); + /* Do customization to the defaults */ + .... + } +NOTE: omapx_opp_init will be omap3_opp_init or as required +based on the omap family. diff --git a/Documentation/arm/Porting b/Documentation/arm/Porting new file mode 100644 index 000000000..a49223393 --- /dev/null +++ b/Documentation/arm/Porting @@ -0,0 +1,135 @@ +Taken from list archive at http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2001-July/004064.html + +Initial definitions +------------------- + +The following symbol definitions rely on you knowing the translation that +__virt_to_phys() does for your machine. This macro converts the passed +virtual address to a physical address. Normally, it is simply: + + phys = virt - PAGE_OFFSET + PHYS_OFFSET + + +Decompressor Symbols +-------------------- + +ZTEXTADDR + Start address of decompressor. There's no point in talking about + virtual or physical addresses here, since the MMU will be off at + the time when you call the decompressor code. You normally call + the kernel at this address to start it booting. This doesn't have + to be located in RAM, it can be in flash or other read-only or + read-write addressable medium. + +ZBSSADDR + Start address of zero-initialised work area for the decompressor. + This must be pointing at RAM. The decompressor will zero initialise + this for you. Again, the MMU will be off. + +ZRELADDR + This is the address where the decompressed kernel will be written, + and eventually executed. The following constraint must be valid: + + __virt_to_phys(TEXTADDR) == ZRELADDR + + The initial part of the kernel is carefully coded to be position + independent. + +INITRD_PHYS + Physical address to place the initial RAM disk. Only relevant if + you are using the bootpImage stuff (which only works on the old + struct param_struct). + +INITRD_VIRT + Virtual address of the initial RAM disk. The following constraint + must be valid: + + __virt_to_phys(INITRD_VIRT) == INITRD_PHYS + +PARAMS_PHYS + Physical address of the struct param_struct or tag list, giving the + kernel various parameters about its execution environment. + + +Kernel Symbols +-------------- + +PHYS_OFFSET + Physical start address of the first bank of RAM. + +PAGE_OFFSET + Virtual start address of the first bank of RAM. During the kernel + boot phase, virtual address PAGE_OFFSET will be mapped to physical + address PHYS_OFFSET, along with any other mappings you supply. + This should be the same value as TASK_SIZE. + +TASK_SIZE + The maximum size of a user process in bytes. Since user space + always starts at zero, this is the maximum address that a user + process can access+1. The user space stack grows down from this + address. + + Any virtual address below TASK_SIZE is deemed to be user process + area, and therefore managed dynamically on a process by process + basis by the kernel. I'll call this the user segment. + + Anything above TASK_SIZE is common to all processes. I'll call + this the kernel segment. + + (In other words, you can't put IO mappings below TASK_SIZE, and + hence PAGE_OFFSET). + +TEXTADDR + Virtual start address of kernel, normally PAGE_OFFSET + 0x8000. + This is where the kernel image ends up. With the latest kernels, + it must be located at 32768 bytes into a 128MB region. Previous + kernels placed a restriction of 256MB here. + +DATAADDR + Virtual address for the kernel data segment. Must not be defined + when using the decompressor. + +VMALLOC_START +VMALLOC_END + Virtual addresses bounding the vmalloc() area. There must not be + any static mappings in this area; vmalloc will overwrite them. + The addresses must also be in the kernel segment (see above). + Normally, the vmalloc() area starts VMALLOC_OFFSET bytes above the + last virtual RAM address (found using variable high_memory). + +VMALLOC_OFFSET + Offset normally incorporated into VMALLOC_START to provide a hole + between virtual RAM and the vmalloc area. We do this to allow + out of bounds memory accesses (eg, something writing off the end + of the mapped memory map) to be caught. Normally set to 8MB. + +Architecture Specific Macros +---------------------------- + +BOOT_MEM(pram,pio,vio) + `pram' specifies the physical start address of RAM. Must always + be present, and should be the same as PHYS_OFFSET. + + `pio' is the physical address of an 8MB region containing IO for + use with the debugging macros in arch/arm/kernel/debug-armv.S. + + `vio' is the virtual address of the 8MB debugging region. + + It is expected that the debugging region will be re-initialised + by the architecture specific code later in the code (via the + MAPIO function). + +BOOT_PARAMS + Same as, and see PARAMS_PHYS. + +FIXUP(func) + Machine specific fixups, run before memory subsystems have been + initialised. + +MAPIO(func) + Machine specific function to map IO areas (including the debug + region above). + +INITIRQ(func) + Machine specific function to initialise interrupts. + diff --git a/Documentation/arm/README b/Documentation/arm/README new file mode 100644 index 000000000..9d1e5b2c9 --- /dev/null +++ b/Documentation/arm/README @@ -0,0 +1,204 @@ + ARM Linux 2.6 + ============= + + Please check <ftp://ftp.arm.linux.org.uk/pub/armlinux> for + updates. + +Compilation of kernel +--------------------- + + In order to compile ARM Linux, you will need a compiler capable of + generating ARM ELF code with GNU extensions. GCC 3.3 is known to be + a good compiler. Fortunately, you needn't guess. The kernel will report + an error if your compiler is a recognized offender. + + To build ARM Linux natively, you shouldn't have to alter the ARCH = line + in the top level Makefile. However, if you don't have the ARM Linux ELF + tools installed as default, then you should change the CROSS_COMPILE + line as detailed below. + + If you wish to cross-compile, then alter the following lines in the top + level make file: + + ARCH = <whatever> + with + ARCH = arm + + and + + CROSS_COMPILE= + to + CROSS_COMPILE=<your-path-to-your-compiler-without-gcc> + eg. + CROSS_COMPILE=arm-linux- + + Do a 'make config', followed by 'make Image' to build the kernel + (arch/arm/boot/Image). A compressed image can be built by doing a + 'make zImage' instead of 'make Image'. + + +Bug reports etc +--------------- + + Please send patches to the patch system. For more information, see + http://www.arm.linux.org.uk/developer/patches/info.php Always include some + explanation as to what the patch does and why it is needed. + + Bug reports should be sent to linux-arm-kernel@lists.arm.linux.org.uk, + or submitted through the web form at + http://www.arm.linux.org.uk/developer/ + + When sending bug reports, please ensure that they contain all relevant + information, eg. the kernel messages that were printed before/during + the problem, what you were doing, etc. + + +Include files +------------- + + Several new include directories have been created under include/asm-arm, + which are there to reduce the clutter in the top-level directory. These + directories, and their purpose is listed below: + + arch-* machine/platform specific header files + hardware driver-internal ARM specific data structures/definitions + mach descriptions of generic ARM to specific machine interfaces + proc-* processor dependent header files (currently only two + categories) + + +Machine/Platform support +------------------------ + + The ARM tree contains support for a lot of different machine types. To + continue supporting these differences, it has become necessary to split + machine-specific parts by directory. For this, the machine category is + used to select which directories and files get included (we will use + $(MACHINE) to refer to the category) + + To this end, we now have arch/arm/mach-$(MACHINE) directories which are + designed to house the non-driver files for a particular machine (eg, PCI, + memory management, architecture definitions etc). For all future + machines, there should be a corresponding arch/arm/mach-$(MACHINE)/include/mach + directory. + + +Modules +------- + + Although modularisation is supported (and required for the FP emulator), + each module on an ARM2/ARM250/ARM3 machine when is loaded will take + memory up to the next 32k boundary due to the size of the pages. + Therefore, is modularisation on these machines really worth it? + + However, ARM6 and up machines allow modules to take multiples of 4k, and + as such Acorn RiscPCs and other architectures using these processors can + make good use of modularisation. + + +ADFS Image files +---------------- + + You can access image files on your ADFS partitions by mounting the ADFS + partition, and then using the loopback device driver. You must have + losetup installed. + + Please note that the PCEmulator DOS partitions have a partition table at + the start, and as such, you will have to give '-o offset' to losetup. + + +Request to developers +--------------------- + + When writing device drivers which include a separate assembler file, please + include it in with the C file, and not the arch/arm/lib directory. This + allows the driver to be compiled as a loadable module without requiring + half the code to be compiled into the kernel image. + + In general, try to avoid using assembler unless it is really necessary. It + makes drivers far less easy to port to other hardware. + + +ST506 hard drives +----------------- + + The ST506 hard drive controllers seem to be working fine (if a little + slowly). At the moment they will only work off the controllers on an + A4x0's motherboard, but for it to work off a Podule just requires + someone with a podule to add the addresses for the IRQ mask and the + HDC base to the source. + + As of 31/3/96 it works with two drives (you should get the ADFS + *configure harddrive set to 2). I've got an internal 20MB and a great + big external 5.25" FH 64MB drive (who could ever want more :-) ). + + I've just got 240K/s off it (a dd with bs=128k); thats about half of what + RiscOS gets; but it's a heck of a lot better than the 50K/s I was getting + last week :-) + + Known bug: Drive data errors can cause a hang; including cases where + the controller has fixed the error using ECC. (Possibly ONLY + in that case...hmm). + + +1772 Floppy +----------- + This also seems to work OK, but hasn't been stressed much lately. It + hasn't got any code for disc change detection in there at the moment which + could be a bit of a problem! Suggestions on the correct way to do this + are welcome. + + +CONFIG_MACH_ and CONFIG_ARCH_ +----------------------------- + A change was made in 2003 to the macro names for new machines. + Historically, CONFIG_ARCH_ was used for the bonafide architecture, + e.g. SA1100, as well as implementations of the architecture, + e.g. Assabet. It was decided to change the implementation macros + to read CONFIG_MACH_ for clarity. Moreover, a retroactive fixup has + not been made because it would complicate patching. + + Previous registrations may be found online. + + <http://www.arm.linux.org.uk/developer/machines/> + +Kernel entry (head.S) +-------------------------- + The initial entry into the kernel is via head.S, which uses machine + independent code. The machine is selected by the value of 'r1' on + entry, which must be kept unique. + + Due to the large number of machines which the ARM port of Linux provides + for, we have a method to manage this which ensures that we don't end up + duplicating large amounts of code. + + We group machine (or platform) support code into machine classes. A + class typically based around one or more system on a chip devices, and + acts as a natural container around the actual implementations. These + classes are given directories - arch/arm/mach-<class> and + arch/arm/mach-<class> - which contain the source files to/include/mach + support the machine class. This directories also contain any machine + specific supporting code. + + For example, the SA1100 class is based upon the SA1100 and SA1110 SoC + devices, and contains the code to support the way the on-board and off- + board devices are used, or the device is setup, and provides that + machine specific "personality." + + For platforms that support device tree (DT), the machine selection is + controlled at runtime by passing the device tree blob to the kernel. At + compile-time, support for the machine type must be selected. This allows for + a single multiplatform kernel build to be used for several machine types. + + For platforms that do not use device tree, this machine selection is + controlled by the machine type ID, which acts both as a run-time and a + compile-time code selection method. You can register a new machine via the + web site at: + + <http://www.arm.linux.org.uk/developer/machines/> + + Note: Please do not register a machine type for DT-only platforms. If your + platform is DT-only, you do not need a registered machine type. + +--- +Russell King (15/03/2004) diff --git a/Documentation/arm/SA1100/ADSBitsy b/Documentation/arm/SA1100/ADSBitsy new file mode 100644 index 000000000..f9f62e8c0 --- /dev/null +++ b/Documentation/arm/SA1100/ADSBitsy @@ -0,0 +1,43 @@ +ADS Bitsy Single Board Computer +(It is different from Bitsy(iPAQ) of Compaq) + +For more details, contact Applied Data Systems or see +http://www.applieddata.net/products.html + +The Linux support for this product has been provided by +Woojung Huh <whuh@applieddata.net> + +Use 'make adsbitsy_config' before any 'make config'. +This will set up defaults for ADS Bitsy support. + +The kernel zImage is linked to be loaded and executed at 0xc0400000. + +Linux can be used with the ADS BootLoader that ships with the +newer rev boards. See their documentation on how to load Linux. + +Supported peripherals: +- SA1100 LCD frame buffer (8/16bpp...sort of) +- SA1111 USB Master +- SA1100 serial port +- pcmcia, compact flash +- touchscreen(ucb1200) +- console on LCD screen +- serial ports (ttyS[0-2]) + - ttyS0 is default for serial console + +To do: +- everything else! :-) + +Notes: + +- The flash on board is divided into 3 partitions. + You should be careful to use flash on board. + Its partition is different from GraphicsClient Plus and GraphicsMaster + +- 16bpp mode requires a different cable than what ships with the board. + Contact ADS or look through the manual to wire your own. Currently, + if you compile with 16bit mode support and switch into a lower bpp + mode, the timing is off so the image is corrupted. This will be + fixed soon. + +Any contribution can be sent to nico@fluxnic.net and will be greatly welcome! diff --git a/Documentation/arm/SA1100/Assabet b/Documentation/arm/SA1100/Assabet new file mode 100644 index 000000000..e08a6739e --- /dev/null +++ b/Documentation/arm/SA1100/Assabet @@ -0,0 +1,300 @@ +The Intel Assabet (SA-1110 evaluation) board +============================================ + +Please see: +http://developer.intel.com + +Also some notes from John G Dorsey <jd5q@andrew.cmu.edu>: +http://www.cs.cmu.edu/~wearable/software/assabet.html + + +Building the kernel +------------------- + +To build the kernel with current defaults: + + make assabet_config + make oldconfig + make zImage + +The resulting kernel image should be available in linux/arch/arm/boot/zImage. + + +Installing a bootloader +----------------------- + +A couple of bootloaders able to boot Linux on Assabet are available: + +BLOB (http://www.lartmaker.nl/lartware/blob/) + + BLOB is a bootloader used within the LART project. Some contributed + patches were merged into BLOB to add support for Assabet. + +Compaq's Bootldr + John Dorsey's patch for Assabet support +(http://www.handhelds.org/Compaq/bootldr.html) +(http://www.wearablegroup.org/software/bootldr/) + + Bootldr is the bootloader developed by Compaq for the iPAQ Pocket PC. + John Dorsey has produced add-on patches to add support for Assabet and + the JFFS filesystem. + +RedBoot (http://sources.redhat.com/redboot/) + + RedBoot is a bootloader developed by Red Hat based on the eCos RTOS + hardware abstraction layer. It supports Assabet amongst many other + hardware platforms. + +RedBoot is currently the recommended choice since it's the only one to have +networking support, and is the most actively maintained. + +Brief examples on how to boot Linux with RedBoot are shown below. But first +you need to have RedBoot installed in your flash memory. A known to work +precompiled RedBoot binary is available from the following location: + +ftp://ftp.netwinder.org/users/n/nico/ +ftp://ftp.arm.linux.org.uk/pub/linux/arm/people/nico/ +ftp://ftp.handhelds.org/pub/linux/arm/sa-1100-patches/ + +Look for redboot-assabet*.tgz. Some installation infos are provided in +redboot-assabet*.txt. + + +Initial RedBoot configuration +----------------------------- + +The commands used here are explained in The RedBoot User's Guide available +on-line at http://sources.redhat.com/ecos/docs.html. +Please refer to it for explanations. + +If you have a CF network card (my Assabet kit contained a CF+ LP-E from +Socket Communications Inc.), you should strongly consider using it for TFTP +file transfers. You must insert it before RedBoot runs since it can't detect +it dynamically. + +To initialize the flash directory: + + fis init -f + +To initialize the non-volatile settings, like whether you want to use BOOTP or +a static IP address, etc, use this command: + + fconfig -i + + +Writing a kernel image into flash +--------------------------------- + +First, the kernel image must be loaded into RAM. If you have the zImage file +available on a TFTP server: + + load zImage -r -b 0x100000 + +If you rather want to use Y-Modem upload over the serial port: + + load -m ymodem -r -b 0x100000 + +To write it to flash: + + fis create "Linux kernel" -b 0x100000 -l 0xc0000 + + +Booting the kernel +------------------ + +The kernel still requires a filesystem to boot. A ramdisk image can be loaded +as follows: + + load ramdisk_image.gz -r -b 0x800000 + +Again, Y-Modem upload can be used instead of TFTP by replacing the file name +by '-y ymodem'. + +Now the kernel can be retrieved from flash like this: + + fis load "Linux kernel" + +or loaded as described previously. To boot the kernel: + + exec -b 0x100000 -l 0xc0000 + +The ramdisk image could be stored into flash as well, but there are better +solutions for on-flash filesystems as mentioned below. + + +Using JFFS2 +----------- + +Using JFFS2 (the Second Journalling Flash File System) is probably the most +convenient way to store a writable filesystem into flash. JFFS2 is used in +conjunction with the MTD layer which is responsible for low-level flash +management. More information on the Linux MTD can be found on-line at: +http://www.linux-mtd.infradead.org/. A JFFS howto with some infos about +creating JFFS/JFFS2 images is available from the same site. + +For instance, a sample JFFS2 image can be retrieved from the same FTP sites +mentioned below for the precompiled RedBoot image. + +To load this file: + + load sample_img.jffs2 -r -b 0x100000 + +The result should look like: + +RedBoot> load sample_img.jffs2 -r -b 0x100000 +Raw file loaded 0x00100000-0x00377424 + +Now we must know the size of the unallocated flash: + + fis free + +Result: + +RedBoot> fis free + 0x500E0000 .. 0x503C0000 + +The values above may be different depending on the size of the filesystem and +the type of flash. See their usage below as an example and take care of +substituting yours appropriately. + +We must determine some values: + +size of unallocated flash: 0x503c0000 - 0x500e0000 = 0x2e0000 +size of the filesystem image: 0x00377424 - 0x00100000 = 0x277424 + +We want to fit the filesystem image of course, but we also want to give it all +the remaining flash space as well. To write it: + + fis unlock -f 0x500E0000 -l 0x2e0000 + fis erase -f 0x500E0000 -l 0x2e0000 + fis write -b 0x100000 -l 0x277424 -f 0x500E0000 + fis create "JFFS2" -n -f 0x500E0000 -l 0x2e0000 + +Now the filesystem is associated to a MTD "partition" once Linux has discovered +what they are in the boot process. From Redboot, the 'fis list' command +displays them: + +RedBoot> fis list +Name FLASH addr Mem addr Length Entry point +RedBoot 0x50000000 0x50000000 0x00020000 0x00000000 +RedBoot config 0x503C0000 0x503C0000 0x00020000 0x00000000 +FIS directory 0x503E0000 0x503E0000 0x00020000 0x00000000 +Linux kernel 0x50020000 0x00100000 0x000C0000 0x00000000 +JFFS2 0x500E0000 0x500E0000 0x002E0000 0x00000000 + +However Linux should display something like: + +SA1100 flash: probing 32-bit flash bus +SA1100 flash: Found 2 x16 devices at 0x0 in 32-bit mode +Using RedBoot partition definition +Creating 5 MTD partitions on "SA1100 flash": +0x00000000-0x00020000 : "RedBoot" +0x00020000-0x000e0000 : "Linux kernel" +0x000e0000-0x003c0000 : "JFFS2" +0x003c0000-0x003e0000 : "RedBoot config" +0x003e0000-0x00400000 : "FIS directory" + +What's important here is the position of the partition we are interested in, +which is the third one. Within Linux, this correspond to /dev/mtdblock2. +Therefore to boot Linux with the kernel and its root filesystem in flash, we +need this RedBoot command: + + fis load "Linux kernel" + exec -b 0x100000 -l 0xc0000 -c "root=/dev/mtdblock2" + +Of course other filesystems than JFFS might be used, like cramfs for example. +You might want to boot with a root filesystem over NFS, etc. It is also +possible, and sometimes more convenient, to flash a filesystem directly from +within Linux while booted from a ramdisk or NFS. The Linux MTD repository has +many tools to deal with flash memory as well, to erase it for example. JFFS2 +can then be mounted directly on a freshly erased partition and files can be +copied over directly. Etc... + + +RedBoot scripting +----------------- + +All the commands above aren't so useful if they have to be typed in every +time the Assabet is rebooted. Therefore it's possible to automate the boot +process using RedBoot's scripting capability. + +For example, I use this to boot Linux with both the kernel and the ramdisk +images retrieved from a TFTP server on the network: + +RedBoot> fconfig +Run script at boot: false true +Boot script: +Enter script, terminate with empty line +>> load zImage -r -b 0x100000 +>> load ramdisk_ks.gz -r -b 0x800000 +>> exec -b 0x100000 -l 0xc0000 +>> +Boot script timeout (1000ms resolution): 3 +Use BOOTP for network configuration: true +GDB connection port: 9000 +Network debug at boot time: false +Update RedBoot non-volatile configuration - are you sure (y/n)? y + +Then, rebooting the Assabet is just a matter of waiting for the login prompt. + + + +Nicolas Pitre +nico@fluxnic.net +June 12, 2001 + + +Status of peripherals in -rmk tree (updated 14/10/2001) +------------------------------------------------------- + +Assabet: + Serial ports: + Radio: TX, RX, CTS, DSR, DCD, RI + PM: Not tested. + COM: TX, RX, CTS, DSR, DCD, RTS, DTR, PM + PM: Not tested. + I2C: Implemented, not fully tested. + L3: Fully tested, pass. + PM: Not tested. + + Video: + LCD: Fully tested. PM + (LCD doesn't like being blanked with + neponset connected) + Video out: Not fully + + Audio: + UDA1341: + Playback: Fully tested, pass. + Record: Implemented, not tested. + PM: Not tested. + + UCB1200: + Audio play: Implemented, not heavily tested. + Audio rec: Implemented, not heavily tested. + Telco audio play: Implemented, not heavily tested. + Telco audio rec: Implemented, not heavily tested. + POTS control: No + Touchscreen: Yes + PM: Not tested. + + Other: + PCMCIA: + LPE: Fully tested, pass. + USB: No + IRDA: + SIR: Fully tested, pass. + FIR: Fully tested, pass. + PM: Not tested. + +Neponset: + Serial ports: + COM1,2: TX, RX, CTS, DSR, DCD, RTS, DTR + PM: Not tested. + USB: Implemented, not heavily tested. + PCMCIA: Implemented, not heavily tested. + PM: Not tested. + CF: Implemented, not heavily tested. + PM: Not tested. + +More stuff can be found in the -np (Nicolas Pitre's) tree. + diff --git a/Documentation/arm/SA1100/Brutus b/Documentation/arm/SA1100/Brutus new file mode 100644 index 000000000..6a3aa95e9 --- /dev/null +++ b/Documentation/arm/SA1100/Brutus @@ -0,0 +1,66 @@ +Brutus is an evaluation platform for the SA1100 manufactured by Intel. +For more details, see: + +http://developer.intel.com + +To compile for Brutus, you must issue the following commands: + + make brutus_config + make config + [accept all the defaults] + make zImage + +The resulting kernel will end up in linux/arch/arm/boot/zImage. This file +must be loaded at 0xc0008000 in Brutus's memory and execution started at +0xc0008000 as well with the value of registers r0 = 0 and r1 = 16 upon +entry. + +But prior to execute the kernel, a ramdisk image must also be loaded in +memory. Use memory address 0xd8000000 for this. Note that the file +containing the (compressed) ramdisk image must not exceed 4 MB. + +Typically, you'll need angelboot to load the kernel. +The following angelboot.opt file should be used: + +----- begin angelboot.opt ----- +base 0xc0008000 +entry 0xc0008000 +r0 0x00000000 +r1 0x00000010 +device /dev/ttyS0 +options "9600 8N1" +baud 115200 +otherfile ramdisk_img.gz +otherbase 0xd8000000 +----- end angelboot.opt ----- + +Then load the kernel and ramdisk with: + + angelboot -f angelboot.opt zImage + +The first Brutus serial port (assumed to be linked to /dev/ttyS0 on your +host PC) is used by angel to load the kernel and ramdisk image. The serial +console is provided through the second Brutus serial port. To access it, +you may use minicom configured with /dev/ttyS1, 9600 baud, 8N1, no flow +control. + +Currently supported: + - RS232 serial ports + - audio output + - LCD screen + - keyboard + +The actual Brutus support may not be complete without extra patches. +If such patches exist, they should be found from +ftp.netwinder.org/users/n/nico. + +A full PCMCIA support is still missing, although it's possible to hack +some drivers in order to drive already inserted cards at boot time with +little modifications. + +Any contribution is welcome. + +Please send patches to nico@fluxnic.net + +Have Fun ! + diff --git a/Documentation/arm/SA1100/CERF b/Documentation/arm/SA1100/CERF new file mode 100644 index 000000000..b3d845301 --- /dev/null +++ b/Documentation/arm/SA1100/CERF @@ -0,0 +1,29 @@ +*** The StrongARM version of the CerfBoard/Cube has been discontinued *** + +The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board +that measures approximately 2" square. It includes an Ethernet +controller, an RS232-compatible serial port, a USB function port, and +one CompactFlash+ slot on the back. Pictures can be found at the +Intrinsyc website, http://www.intrinsyc.com. + +This document describes the support in the Linux kernel for the +Intrinsyc CerfBoard. + +Supported in this version: + - CompactFlash+ slot (select PCMCIA in General Setup and any options + that may be required) + - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in + Network Devices) + - Serial ports with a serial console (hardcoded to 38400 8N1) + +In order to get this kernel onto your Cerf, you need a server that runs +both BOOTP and TFTP. Detailed instructions should have come with your +evaluation kit on how to use the bootloader. This series of commands +will suffice: + + make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig + make ARCH=arm CROSS_COMPILE=arm-linux- zImage + make ARCH=arm CROSS_COMPILE=arm-linux- modules + cp arch/arm/boot/zImage <TFTP directory> + +support@intrinsyc.com diff --git a/Documentation/arm/SA1100/FreeBird b/Documentation/arm/SA1100/FreeBird new file mode 100644 index 000000000..ab9193663 --- /dev/null +++ b/Documentation/arm/SA1100/FreeBird @@ -0,0 +1,21 @@ +Freebird-1.1 is produced by Legend(C), Inc. +http://web.archive.org/web/*/http://www.legend.com.cn +and software/linux maintained by Coventive(C), Inc. +(http://www.coventive.com) + +Based on the Nicolas's strongarm kernel tree. + +=============================================================== +Maintainer: + +Chester Kuo <chester@coventive.com> + <chester@linux.org.tw> + +Author : +Tim wu <timwu@coventive.com> +CIH <cih@coventive.com> +Eric Peng <ericpeng@coventive.com> +Jeff Lee <jeff_lee@coventive.com> +Allen Cheng +Tony Liu <tonyliu@coventive.com> + diff --git a/Documentation/arm/SA1100/GraphicsClient b/Documentation/arm/SA1100/GraphicsClient new file mode 100644 index 000000000..867bb3594 --- /dev/null +++ b/Documentation/arm/SA1100/GraphicsClient @@ -0,0 +1,98 @@ +ADS GraphicsClient Plus Single Board Computer + +For more details, contact Applied Data Systems or see +http://www.applieddata.net/products.html + +The original Linux support for this product has been provided by +Nicolas Pitre <nico@fluxnic.net>. Continued development work by +Woojung Huh <whuh@applieddata.net> + +It's currently possible to mount a root filesystem via NFS providing a +complete Linux environment. Otherwise a ramdisk image may be used. The +board supports MTD/JFFS, so you could also mount something on there. + +Use 'make graphicsclient_config' before any 'make config'. This will set up +defaults for GraphicsClient Plus support. + +The kernel zImage is linked to be loaded and executed at 0xc0200000. +Also the following registers should have the specified values upon entry: + + r0 = 0 + r1 = 29 (this is the GraphicsClient architecture number) + +Linux can be used with the ADS BootLoader that ships with the +newer rev boards. See their documentation on how to load Linux. +Angel is not available for the GraphicsClient Plus AFAIK. + +There is a board known as just the GraphicsClient that ADS used to +produce but has end of lifed. This code will not work on the older +board with the ADS bootloader, but should still work with Angel, +as outlined below. In any case, if you're planning on deploying +something en masse, you should probably get the newer board. + +If using Angel on the older boards, here is a typical angel.opt option file +if the kernel is loaded through the Angel Debug Monitor: + +----- begin angelboot.opt ----- +base 0xc0200000 +entry 0xc0200000 +r0 0x00000000 +r1 0x0000001d +device /dev/ttyS1 +options "38400 8N1" +baud 115200 +#otherfile ramdisk.gz +#otherbase 0xc0800000 +exec minicom +----- end angelboot.opt ----- + +Then the kernel (and ramdisk if otherfile/otherbase lines above are +uncommented) would be loaded with: + + angelboot -f angelboot.opt zImage + +Here it is assumed that the board is connected to ttyS1 on your PC +and that minicom is preconfigured with /dev/ttyS1, 38400 baud, 8N1, no flow +control by default. + +If any other bootloader is used, ensure it accomplish the same, especially +for r0/r1 register values before jumping into the kernel. + + +Supported peripherals: +- SA1100 LCD frame buffer (8/16bpp...sort of) +- on-board SMC 92C96 ethernet NIC +- SA1100 serial port +- flash memory access (MTD/JFFS) +- pcmcia +- touchscreen(ucb1200) +- ps/2 keyboard +- console on LCD screen +- serial ports (ttyS[0-2]) + - ttyS0 is default for serial console +- Smart I/O (ADC, keypad, digital inputs, etc) + See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation + and example user space code. ps/2 keybd is multiplexed through this driver + +To do: +- UCB1200 audio with new ucb_generic layer +- everything else! :-) + +Notes: + +- The flash on board is divided into 3 partitions. mtd0 is where + the ADS boot ROM and zImage is stored. It's been marked as + read-only to keep you from blasting over the bootloader. :) mtd1 is + for the ramdisk.gz image. mtd2 is user flash space and can be + utilized for either JFFS or if you're feeling crazy, running ext2 + on top of it. If you're not using the ADS bootloader, you're + welcome to blast over the mtd1 partition also. + +- 16bpp mode requires a different cable than what ships with the board. + Contact ADS or look through the manual to wire your own. Currently, + if you compile with 16bit mode support and switch into a lower bpp + mode, the timing is off so the image is corrupted. This will be + fixed soon. + +Any contribution can be sent to nico@fluxnic.net and will be greatly welcome! + diff --git a/Documentation/arm/SA1100/GraphicsMaster b/Documentation/arm/SA1100/GraphicsMaster new file mode 100644 index 000000000..9145088a0 --- /dev/null +++ b/Documentation/arm/SA1100/GraphicsMaster @@ -0,0 +1,53 @@ +ADS GraphicsMaster Single Board Computer + +For more details, contact Applied Data Systems or see +http://www.applieddata.net/products.html + +The original Linux support for this product has been provided by +Nicolas Pitre <nico@fluxnic.net>. Continued development work by +Woojung Huh <whuh@applieddata.net> + +Use 'make graphicsmaster_config' before any 'make config'. +This will set up defaults for GraphicsMaster support. + +The kernel zImage is linked to be loaded and executed at 0xc0400000. + +Linux can be used with the ADS BootLoader that ships with the +newer rev boards. See their documentation on how to load Linux. + +Supported peripherals: +- SA1100 LCD frame buffer (8/16bpp...sort of) +- SA1111 USB Master +- on-board SMC 92C96 ethernet NIC +- SA1100 serial port +- flash memory access (MTD/JFFS) +- pcmcia, compact flash +- touchscreen(ucb1200) +- ps/2 keyboard +- console on LCD screen +- serial ports (ttyS[0-2]) + - ttyS0 is default for serial console +- Smart I/O (ADC, keypad, digital inputs, etc) + See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation + and example user space code. ps/2 keybd is multiplexed through this driver + +To do: +- everything else! :-) + +Notes: + +- The flash on board is divided into 3 partitions. mtd0 is where + the zImage is stored. It's been marked as read-only to keep you + from blasting over the bootloader. :) mtd1 is + for the ramdisk.gz image. mtd2 is user flash space and can be + utilized for either JFFS or if you're feeling crazy, running ext2 + on top of it. If you're not using the ADS bootloader, you're + welcome to blast over the mtd1 partition also. + +- 16bpp mode requires a different cable than what ships with the board. + Contact ADS or look through the manual to wire your own. Currently, + if you compile with 16bit mode support and switch into a lower bpp + mode, the timing is off so the image is corrupted. This will be + fixed soon. + +Any contribution can be sent to nico@fluxnic.net and will be greatly welcome! diff --git a/Documentation/arm/SA1100/HUW_WEBPANEL b/Documentation/arm/SA1100/HUW_WEBPANEL new file mode 100644 index 000000000..fd56b48d4 --- /dev/null +++ b/Documentation/arm/SA1100/HUW_WEBPANEL @@ -0,0 +1,17 @@ +The HUW_WEBPANEL is a product of the german company Hoeft & Wessel AG + +If you want more information, please visit +http://www.hoeft-wessel.de + +To build the kernel: + make huw_webpanel_config + make oldconfig + [accept all defaults] + make zImage + +Mostly of the work is done by: +Roman Jordan jor@hoeft-wessel.de +Christoph Schulz schu@hoeft-wessel.de + +2000/12/18/ + diff --git a/Documentation/arm/SA1100/Itsy b/Documentation/arm/SA1100/Itsy new file mode 100644 index 000000000..44b94997f --- /dev/null +++ b/Documentation/arm/SA1100/Itsy @@ -0,0 +1,39 @@ +Itsy is a research project done by the Western Research Lab, and Systems +Research Center in Palo Alto, CA. The Itsy project is one of several +research projects at Compaq that are related to pocket computing. + +For more information, see: + + http://www.hpl.hp.com/downloads/crl/itsy/ + +Notes on initial 2.4 Itsy support (8/27/2000) : +The port was done on an Itsy version 1.5 machine with a daughtercard with +64 Meg of DRAM and 32 Meg of Flash. The initial work includes support for +serial console (to see what you're doing). No other devices have been +enabled. + +To build, do a "make menuconfig" (or xmenuconfig) and select Itsy support. +Disable Flash and LCD support. and then do a make zImage. +Finally, you will need to cd to arch/arm/boot/tools and execute a make there +to build the params-itsy program used to boot the kernel. + +In order to install the port of 2.4 to the itsy, You will need to set the +configuration parameters in the monitor as follows: +Arg 1:0x08340000, Arg2: 0xC0000000, Arg3:18 (0x12), Arg4:0 +Make sure the start-routine address is set to 0x00060000. + +Next, flash the params-itsy program to 0x00060000 ("p 1 0x00060000" in the +flash menu) Flash the kernel in arch/arm/boot/zImage into 0x08340000 +("p 1 0x00340000"). Finally flash an initial ramdisk into 0xC8000000 +("p 2 0x0") We used ramdisk-2-30.gz from the 0.11 version directory on +handhelds.org. + +The serial connection we established was at: + 8-bit data, no parity, 1 stop bit(s), 115200.00 b/s. in the monitor, in the +params-itsy program, and in the kernel itself. This can be changed, but +not easily. The monitor parameters are easily changed, the params program +setup is assembly outl's, and the kernel is a configuration item specific to +the itsy. (i.e. grep for CONFIG_SA1100_ITSY and you'll find where it is.) + + +This should get you a properly booting 2.4 kernel on the itsy. diff --git a/Documentation/arm/SA1100/LART b/Documentation/arm/SA1100/LART new file mode 100644 index 000000000..6d412b685 --- /dev/null +++ b/Documentation/arm/SA1100/LART @@ -0,0 +1,14 @@ +Linux Advanced Radio Terminal (LART) +------------------------------------ + +The LART is a small (7.5 x 10cm) SA-1100 board, designed for embedded +applications. It has 32 MB DRAM, 4MB Flash ROM, double RS232 and all +other StrongARM-gadgets. Almost all SA signals are directly accessible +through a number of connectors. The powersupply accepts voltages +between 3.5V and 16V and is overdimensioned to support a range of +daughterboards. A quad Ethernet / IDE / PS2 / sound daughterboard +is under development, with plenty of others in different stages of +planning. + +The hardware designs for this board have been released under an open license; +see the LART page at http://www.lartmaker.nl/ for more information. diff --git a/Documentation/arm/SA1100/PLEB b/Documentation/arm/SA1100/PLEB new file mode 100644 index 000000000..b9c8a631a --- /dev/null +++ b/Documentation/arm/SA1100/PLEB @@ -0,0 +1,11 @@ +The PLEB project was started as a student initiative at the School of +Computer Science and Engineering, University of New South Wales to make a +pocket computer capable of running the Linux Kernel. + +PLEB support has yet to be fully integrated. + +For more information, see: + + http://www.cse.unsw.edu.au + + diff --git a/Documentation/arm/SA1100/Pangolin b/Documentation/arm/SA1100/Pangolin new file mode 100644 index 000000000..077a6120e --- /dev/null +++ b/Documentation/arm/SA1100/Pangolin @@ -0,0 +1,23 @@ +Pangolin is a StrongARM 1110-based evaluation platform produced +by Dialogue Technology (http://www.dialogue.com.tw/). +It has EISA slots for ease of configuration with SDRAM/Flash +memory card, USB/Serial/Audio card, Compact Flash card, +PCMCIA/IDE card and TFT-LCD card. + +To compile for Pangolin, you must issue the following commands: + + make pangolin_config + make oldconfig + make zImage + +Supported peripherals: +- SA1110 serial port (UART1/UART2/UART3) +- flash memory access +- compact flash driver +- UDA1341 sound driver +- SA1100 LCD controller for 800x600 16bpp TFT-LCD +- MQ-200 driver for 800x600 16bpp TFT-LCD +- Penmount(touch panel) driver +- PCMCIA driver +- SMC91C94 LAN driver +- IDE driver (experimental) diff --git a/Documentation/arm/SA1100/Tifon b/Documentation/arm/SA1100/Tifon new file mode 100644 index 000000000..dd1934d9c --- /dev/null +++ b/Documentation/arm/SA1100/Tifon @@ -0,0 +1,7 @@ +Tifon +----- + +More info has to come... + +Contact: Peter Danielsson <peter.danielsson@era-t.ericsson.se> + diff --git a/Documentation/arm/SA1100/Yopy b/Documentation/arm/SA1100/Yopy new file mode 100644 index 000000000..e14f16d83 --- /dev/null +++ b/Documentation/arm/SA1100/Yopy @@ -0,0 +1,2 @@ +See http://www.yopydeveloper.org for more. + diff --git a/Documentation/arm/SA1100/empeg b/Documentation/arm/SA1100/empeg new file mode 100644 index 000000000..4ece4849a --- /dev/null +++ b/Documentation/arm/SA1100/empeg @@ -0,0 +1,2 @@ +See ../empeg/README + diff --git a/Documentation/arm/SA1100/nanoEngine b/Documentation/arm/SA1100/nanoEngine new file mode 100644 index 000000000..48a7934f9 --- /dev/null +++ b/Documentation/arm/SA1100/nanoEngine @@ -0,0 +1,11 @@ +nanoEngine +---------- + +"nanoEngine" is a SA1110 based single board computer from +Bright Star Engineering Inc. See www.brightstareng.com/arm +for more info. +(Ref: Stuart Adams <sja@brightstareng.com>) + +Also visit Larry Doolittle's "Linux for the nanoEngine" site: +http://www.brightstareng.com/arm/nanoeng.htm + diff --git a/Documentation/arm/SA1100/serial_UART b/Documentation/arm/SA1100/serial_UART new file mode 100644 index 000000000..a63966f1d --- /dev/null +++ b/Documentation/arm/SA1100/serial_UART @@ -0,0 +1,47 @@ +The SA1100 serial port had its major/minor numbers officially assigned: + +> Date: Sun, 24 Sep 2000 21:40:27 -0700 +> From: H. Peter Anvin <hpa@transmeta.com> +> To: Nicolas Pitre <nico@CAM.ORG> +> Cc: Device List Maintainer <device@lanana.org> +> Subject: Re: device +> +> Okay. Note that device numbers 204 and 205 are used for "low density +> serial devices", so you will have a range of minors on those majors (the +> tty device layer handles this just fine, so you don't have to worry about +> doing anything special.) +> +> So your assignments are: +> +> 204 char Low-density serial ports +> 5 = /dev/ttySA0 SA1100 builtin serial port 0 +> 6 = /dev/ttySA1 SA1100 builtin serial port 1 +> 7 = /dev/ttySA2 SA1100 builtin serial port 2 +> +> 205 char Low-density serial ports (alternate device) +> 5 = /dev/cusa0 Callout device for ttySA0 +> 6 = /dev/cusa1 Callout device for ttySA1 +> 7 = /dev/cusa2 Callout device for ttySA2 +> + +You must create those inodes in /dev on the root filesystem used +by your SA1100-based device: + + mknod ttySA0 c 204 5 + mknod ttySA1 c 204 6 + mknod ttySA2 c 204 7 + mknod cusa0 c 205 5 + mknod cusa1 c 205 6 + mknod cusa2 c 205 7 + +In addition to the creation of the appropriate device nodes above, you +must ensure your user space applications make use of the correct device +name. The classic example is the content of the /etc/inittab file where +you might have a getty process started on ttyS0. In this case: + +- replace occurrences of ttyS0 with ttySA0, ttyS1 with ttySA1, etc. + +- don't forget to add 'ttySA0', 'console', or the appropriate tty name + in /etc/securetty for root to be allowed to login as well. + + diff --git a/Documentation/arm/SH-Mobile/.gitignore b/Documentation/arm/SH-Mobile/.gitignore new file mode 100644 index 000000000..c928dbf3c --- /dev/null +++ b/Documentation/arm/SH-Mobile/.gitignore @@ -0,0 +1 @@ +vrl4 diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt new file mode 100644 index 000000000..1b049be6c --- /dev/null +++ b/Documentation/arm/SPEAr/overview.txt @@ -0,0 +1,63 @@ + SPEAr ARM Linux Overview + ========================== + +Introduction +------------ + + SPEAr (Structured Processor Enhanced Architecture). + weblink : http://www.st.com/spear + + The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are + supported by the 'spear' platform of ARM Linux. Currently SPEAr1310, + SPEAr1340, SPEAr300, SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. + + Hierarchy in SPEAr is as follows: + + SPEAr (Platform) + - SPEAr3XX (3XX SOC series, based on ARM9) + - SPEAr300 (SOC) + - SPEAr300 Evaluation Board + - SPEAr310 (SOC) + - SPEAr310 Evaluation Board + - SPEAr320 (SOC) + - SPEAr320 Evaluation Board + - SPEAr6XX (6XX SOC series, based on ARM9) + - SPEAr600 (SOC) + - SPEAr600 Evaluation Board + - SPEAr13XX (13XX SOC series, based on ARM CORTEXA9) + - SPEAr1310 (SOC) + - SPEAr1310 Evaluation Board + - SPEAr1340 (SOC) + - SPEAr1340 Evaluation Board + + Configuration + ------------- + + A generic configuration is provided for each machine, and can be used as the + default by + make spear13xx_defconfig + make spear3xx_defconfig + make spear6xx_defconfig + + Layout + ------ + + The common files for multiple machine families (SPEAr3xx, SPEAr6xx and + SPEAr13xx) are located in the platform code contained in arch/arm/plat-spear + with headers in plat/. + + Each machine series have a directory with name arch/arm/mach-spear followed by + series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx. + + Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c, for + spear6xx is mach-spear6xx/spear6xx.c and for spear13xx family is + mach-spear13xx/spear13xx.c. mach-spear* also contain soc/machine specific + files, like spear1310.c, spear1340.c spear300.c, spear310.c, spear320.c and + spear600.c. mach-spear* doesn't contains board specific files as they fully + support Flattened Device Tree. + + + Document Author + --------------- + + Viresh Kumar <vireshk@kernel.org>, (c) 2010-2012 ST Microelectronics diff --git a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt new file mode 100644 index 000000000..fa968aa99 --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt @@ -0,0 +1,75 @@ + S3C24XX CPUfreq support + ======================= + +Introduction +------------ + + The S3C24XX series support a number of power saving systems, such as + the ability to change the core, memory and peripheral operating + frequencies. The core control is exported via the CPUFreq driver + which has a number of different manual or automatic controls over the + rate the core is running at. + + There are two forms of the driver depending on the specific CPU and + how the clocks are arranged. The first implementation used as single + PLL to feed the ARM, memory and peripherals via a series of dividers + and muxes and this is the implementation that is documented here. A + newer version where there is a separate PLL and clock divider for the + ARM core is available as a separate driver. + + +Layout +------ + + The code core manages the CPU specific drivers, any data that they + need to register and the interface to the generic drivers/cpufreq + system. Each CPU registers a driver to control the PLL, clock dividers + and anything else associated with it. Any board that wants to use this + framework needs to supply at least basic details of what is required. + + The core registers with drivers/cpufreq at init time if all the data + necessary has been supplied. + + +CPU support +----------- + + The support for each CPU depends on the facilities provided by the + SoC and the driver as each device has different PLL and clock chains + associated with it. + + +Slow Mode +--------- + + The SLOW mode where the PLL is turned off altogether and the + system is fed by the external crystal input is currently not + supported. + + +sysfs +----- + + The core code exports extra information via sysfs in the directory + devices/system/cpu/cpu0/arch-freq. + + +Board Support +------------- + + Each board that wants to use the cpufreq code must register some basic + information with the core driver to provide information about what the + board requires and any restrictions being placed on it. + + The board needs to supply information about whether it needs the IO bank + timings changing, any maximum frequency limits and information about the + SDRAM refresh rate. + + + + +Document Author +--------------- + +Ben Dooks, Copyright 2009 Simtec Electronics +Licensed under GPLv2 diff --git a/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt b/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt new file mode 100644 index 000000000..b87292e05 --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt @@ -0,0 +1,58 @@ + Simtec Electronics EB2410ITX (BAST) + =================================== + + http://www.simtec.co.uk/products/EB2410ITX/ + +Introduction +------------ + + The EB2410ITX is a S3C2410 based development board with a variety of + peripherals and expansion connectors. This board is also known by + the shortened name of Bast. + + +Configuration +------------- + + To set the default configuration, use `make bast_defconfig` which + supports the commonly used features of this board. + + +Support +------- + + Official support information can be found on the Simtec Electronics + website, at the product page http://www.simtec.co.uk/products/EB2410ITX/ + + Useful links: + + - Resources Page http://www.simtec.co.uk/products/EB2410ITX/resources.html + + - Board FAQ at http://www.simtec.co.uk/products/EB2410ITX/faq.html + + - Bootloader info http://www.simtec.co.uk/products/SWABLE/resources.html + and FAQ http://www.simtec.co.uk/products/SWABLE/faq.html + + +MTD +--- + + The NAND and NOR support has been merged from the linux-mtd project. + Any problems, see http://www.linux-mtd.infradead.org/ for more + information or up-to-date versions of linux-mtd. + + +IDE +--- + + Both onboard IDE ports are supported, however there is no support for + changing speed of devices, PIO Mode 4 capable drives should be used. + + +Maintainers +----------- + + This board is maintained by Simtec Electronics. + + +Copyright 2004 Ben Dooks, Simtec Electronics diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt new file mode 100644 index 000000000..0ebd7e224 --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt @@ -0,0 +1,171 @@ + S3C24XX GPIO Control + ==================== + +Introduction +------------ + + The s3c2410 kernel provides an interface to configure and + manipulate the state of the GPIO pins, and find out other + information about them. + + There are a number of conditions attached to the configuration + of the s3c2410 GPIO system, please read the Samsung provided + data-sheet/users manual to find out the complete list. + + See Documentation/arm/Samsung/GPIO.txt for the core implementation. + + +GPIOLIB +------- + + With the event of the GPIOLIB in drivers/gpio, support for some + of the GPIO functions such as reading and writing a pin will + be removed in favour of this common access method. + + Once all the extant drivers have been converted, the functions + listed below will be removed (they may be marked as __deprecated + in the near future). + + The following functions now either have a s3c_ specific variant + or are merged into gpiolib. See the definitions in + arch/arm/plat-samsung/include/plat/gpio-cfg.h: + + s3c2410_gpio_setpin() gpio_set_value() or gpio_direction_output() + s3c2410_gpio_getpin() gpio_get_value() or gpio_direction_input() + s3c2410_gpio_getirq() gpio_to_irq() + s3c2410_gpio_cfgpin() s3c_gpio_cfgpin() + s3c2410_gpio_getcfg() s3c_gpio_getcfg() + s3c2410_gpio_pullup() s3c_gpio_setpull() + + +GPIOLIB conversion +------------------ + +If you need to convert your board or driver to use gpiolib from the phased +out s3c2410 API, then here are some notes on the process. + +1) If your board is exclusively using an GPIO, say to control peripheral + power, then it will require to claim the gpio with gpio_request() before + it can use it. + + It is recommended to check the return value, with at least WARN_ON() + during initialisation. + +2) The s3c2410_gpio_cfgpin() can be directly replaced with s3c_gpio_cfgpin() + as they have the same arguments, and can either take the pin specific + values, or the more generic special-function-number arguments. + +3) s3c2410_gpio_pullup() changes have the problem that whilst the + s3c2410_gpio_pullup(x, 1) can be easily translated to the + s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0) + are not so easy. + + The s3c2410_gpio_pullup(x, 0) case enables the pull-up (or in the case + of some of the devices, a pull-down) and as such the new API distinguishes + between the UP and DOWN case. There is currently no 'just turn on' setting + which may be required if this becomes a problem. + +4) s3c2410_gpio_setpin() can be replaced by gpio_set_value(), the old call + does not implicitly configure the relevant gpio to output. The gpio + direction should be changed before using gpio_set_value(). + +5) s3c2410_gpio_getpin() is replaceable by gpio_get_value() if the pin + has been set to input. It is currently unknown what the behaviour is + when using gpio_get_value() on an output pin (s3c2410_gpio_getpin + would return the value the pin is supposed to be outputting). + +6) s3c2410_gpio_getirq() should be directly replaceable with the + gpio_to_irq() call. + +The s3c2410_gpio and gpio_ calls have always operated on the same gpio +numberspace, so there is no problem with converting the gpio numbering +between the calls. + + +Headers +------- + + See arch/arm/mach-s3c24xx/include/mach/regs-gpio.h for the list + of GPIO pins, and the configuration values for them. This + is included by using #include <mach/regs-gpio.h> + + +PIN Numbers +----------- + + Each pin has an unique number associated with it in regs-gpio.h, + e.g. S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell + the GPIO functions which pin is to be used. + + With the conversion to gpiolib, there is no longer a direct conversion + from gpio pin number to register base address as in earlier kernels. This + is due to the number space required for newer SoCs where the later + GPIOs are not contiguous. + + +Configuring a pin +----------------- + + The following function allows the configuration of a given pin to + be changed. + + void s3c_gpio_cfgpin(unsigned int pin, unsigned int function); + + e.g.: + + s3c_gpio_cfgpin(S3C2410_GPA(0), S3C_GPIO_SFN(1)); + s3c_gpio_cfgpin(S3C2410_GPE(8), S3C_GPIO_SFN(2)); + + which would turn GPA(0) into the lowest Address line A0, and set + GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line. + + +Reading the current configuration +--------------------------------- + + The current configuration of a pin can be read by using standard + gpiolib function: + + s3c_gpio_getcfg(unsigned int pin); + + The return value will be from the same set of values which can be + passed to s3c_gpio_cfgpin(). + + +Configuring a pull-up resistor +------------------------------ + + A large proportion of the GPIO pins on the S3C2410 can have weak + pull-up resistors enabled. This can be configured by the following + function: + + void s3c_gpio_setpull(unsigned int pin, unsigned int to); + + Where the to value is S3C_GPIO_PULL_NONE to set the pull-up off, + and S3C_GPIO_PULL_UP to enable the specified pull-up. Any other + values are currently undefined. + + +Getting and setting the state of a PIN +-------------------------------------- + + These calls are now implemented by the relevant gpiolib calls, convert + your board or driver to use gpiolib. + + +Getting the IRQ number associated with a PIN +-------------------------------------------- + + A standard gpiolib function can map the given pin number to an IRQ + number to pass to the IRQ system. + + int gpio_to_irq(unsigned int pin); + + Note, not all pins have an IRQ. + + +Author +------- + +Ben Dooks, 03 October 2004 +Copyright 2004 Ben Dooks, Simtec Electronics diff --git a/Documentation/arm/Samsung-S3C24XX/H1940.txt b/Documentation/arm/Samsung-S3C24XX/H1940.txt new file mode 100644 index 000000000..b738859b1 --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/H1940.txt @@ -0,0 +1,40 @@ + HP IPAQ H1940 + ============= + +http://www.handhelds.org/projects/h1940.html + +Introduction +------------ + + The HP H1940 is a S3C2410 based handheld device, with + bluetooth connectivity. + + +Support +------- + + A variety of information is available + + handhelds.org project page: + + http://www.handhelds.org/projects/h1940.html + + handhelds.org wiki page: + + http://handhelds.org/moin/moin.cgi/HpIpaqH1940 + + Herbert Pötzl pages: + + http://vserver.13thfloor.at/H1940/ + + +Maintainers +----------- + + This project is being maintained and developed by a variety + of people, including Ben Dooks, Arnaud Patard, and Herbert Pötzl. + + Thanks to the many others who have also provided support. + + +(c) 2005 Ben Dooks diff --git a/Documentation/arm/Samsung-S3C24XX/NAND.txt b/Documentation/arm/Samsung-S3C24XX/NAND.txt new file mode 100644 index 000000000..bc478a340 --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/NAND.txt @@ -0,0 +1,30 @@ + S3C24XX NAND Support + ==================== + +Introduction +------------ + +Small Page NAND +--------------- + +The driver uses a 512 byte (1 page) ECC code for this setup. The +ECC code is not directly compatible with the default kernel ECC +code, so the driver enforces its own OOB layout and ECC parameters + +Large Page NAND +--------------- + +The driver is capable of handling NAND flash with a 2KiB page +size, with support for hardware ECC generation and correction. + +Unlike the 512byte page mode, the driver generates ECC data for +each 256 byte block in an 2KiB page. This means that more than +one error in a page can be rectified. It also means that the +OOB layout remains the default kernel layout for these flashes. + + +Document Author +--------------- + +Ben Dooks, Copyright 2007 Simtec Electronics + diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt new file mode 100644 index 000000000..359587b23 --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt @@ -0,0 +1,318 @@ + S3C24XX ARM Linux Overview + ========================== + + + +Introduction +------------ + + The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported + by the 's3c2410' architecture of ARM Linux. Currently the S3C2410, + S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 and S3C2450 devices + are supported. + + Support for the S3C2400 and S3C24A0 series was never completed and the + corresponding code has been removed after a while. If someone wishes to + revive this effort, partial support can be retrieved from earlier Linux + versions. + + The S3C2416 and S3C2450 devices are very similar and S3C2450 support is + included under the arch/arm/mach-s3c2416 directory. Note, whilst core + support for these SoCs is in, work on some of the extra peripherals + and extra interrupts is still ongoing. + + +Configuration +------------- + + A generic S3C2410 configuration is provided, and can be used as the + default by `make s3c2410_defconfig`. This configuration has support + for all the machines, and the commonly used features on them. + + Certain machines may have their own default configurations as well, + please check the machine specific documentation. + + +Layout +------ + + The core support files are located in the platform code contained in + arch/arm/plat-s3c24xx with headers in include/asm-arm/plat-s3c24xx. + This directory should be kept to items shared between the platform + code (arch/arm/plat-s3c24xx) and the arch/arm/mach-s3c24* code. + + Each cpu has a directory with the support files for it, and the + machines that carry the device. For example S3C2410 is contained + in arch/arm/mach-s3c2410 and S3C2440 in arch/arm/mach-s3c2440 + + Register, kernel and platform data definitions are held in the + arch/arm/mach-s3c2410 directory./include/mach + +arch/arm/plat-s3c24xx: + + Files in here are either common to all the s3c24xx family, + or are common to only some of them with names to indicate this + status. The files that are not common to all are generally named + with the initial cpu they support in the series to ensure a short + name without any possibility of confusion with newer devices. + + As an example, initially s3c244x would cover s3c2440 and s3c2442, but + with the s3c2443 which does not share many of the same drivers in + this directory, the name becomes invalid. We stick to s3c2440-<x> + to indicate a driver that is s3c2440 and s3c2442 compatible. + + This does mean that to find the status of any given SoC, a number + of directories may need to be searched. + + +Machines +-------- + + The currently supported machines are as follows: + + Simtec Electronics EB2410ITX (BAST) + + A general purpose development board, see EB2410ITX.txt for further + details + + Simtec Electronics IM2440D20 (Osiris) + + CPU Module from Simtec Electronics, with a S3C2440A CPU, nand flash + and a PCMCIA controller. + + Samsung SMDK2410 + + Samsung's own development board, geared for PDA work. + + Samsung/Aiji SMDK2412 + + The S3C2412 version of the SMDK2440. + + Samsung/Aiji SMDK2413 + + The S3C2412 version of the SMDK2440. + + Samsung/Meritech SMDK2440 + + The S3C2440 compatible version of the SMDK2440, which has the + option of an S3C2440 or S3C2442 CPU module. + + Thorcom VR1000 + + Custom embedded board + + HP IPAQ 1940 + + Handheld (IPAQ), available in several varieties + + HP iPAQ rx3715 + + S3C2440 based IPAQ, with a number of variations depending on + features shipped. + + Acer N30 + + A S3C2410 based PDA from Acer. There is a Wiki page at + http://handhelds.org/moin/moin.cgi/AcerN30Documentation . + + AML M5900 + + American Microsystems' M5900 + + Nex Vision Nexcoder + Nex Vision Otom + + Two machines by Nex Vision + + +Adding New Machines +------------------- + + The architecture has been designed to support as many machines as can + be configured for it in one kernel build, and any future additions + should keep this in mind before altering items outside of their own + machine files. + + Machine definitions should be kept in linux/arch/arm/mach-s3c2410, + and there are a number of examples that can be looked at. + + Read the kernel patch submission policies as well as the + Documentation/arm directory before submitting patches. The + ARM kernel series is managed by Russell King, and has a patch system + located at http://www.arm.linux.org.uk/developer/patches/ + as well as mailing lists that can be found from the same site. + + As a courtesy, please notify <ben-linux@fluff.org> of any new + machines or other modifications. + + Any large scale modifications, or new drivers should be discussed + on the ARM kernel mailing list (linux-arm-kernel) before being + attempted. See http://www.arm.linux.org.uk/mailinglists/ for the + mailing list information. + + +I2C +--- + + The hardware I2C core in the CPU is supported in single master + mode, and can be configured via platform data. + + +RTC +--- + + Support for the onboard RTC unit, including alarm function. + + This has recently been upgraded to use the new RTC core, + and the module has been renamed to rtc-s3c to fit in with + the new rtc naming scheme. + + +Watchdog +-------- + + The onchip watchdog is available via the standard watchdog + interface. + + +NAND +---- + + The current kernels now have support for the s3c2410 NAND + controller. If there are any problems the latest linux-mtd + code can be found from http://www.linux-mtd.infradead.org/ + + For more information see Documentation/arm/Samsung-S3C24XX/NAND.txt + + +SD/MMC +------ + + The SD/MMC hardware pre S3C2443 is supported in the current + kernel, the driver is drivers/mmc/host/s3cmci.c and supports + 1 and 4 bit SD or MMC cards. + + The SDIO behaviour of this driver has not been fully tested. There is no + current support for hardware SDIO interrupts. + + +Serial +------ + + The s3c2410 serial driver provides support for the internal + serial ports. These devices appear as /dev/ttySAC0 through 3. + + To create device nodes for these, use the following commands + + mknod ttySAC0 c 204 64 + mknod ttySAC1 c 204 65 + mknod ttySAC2 c 204 66 + + +GPIO +---- + + The core contains support for manipulating the GPIO, see the + documentation in GPIO.txt in the same directory as this file. + + Newer kernels carry GPIOLIB, and support is being moved towards + this with some of the older support in line to be removed. + + As of v2.6.34, the move towards using gpiolib support is almost + complete, and very little of the old calls are left. + + See Documentation/arm/Samsung-S3C24XX/GPIO.txt for the S3C24XX specific + support and Documentation/arm/Samsung/GPIO.txt for the core Samsung + implementation. + + +Clock Management +---------------- + + The core provides the interface defined in the header file + include/asm-arm/hardware/clock.h, to allow control over the + various clock units + + +Suspend to RAM +-------------- + + For boards that provide support for suspend to RAM, the + system can be placed into low power suspend. + + See Suspend.txt for more information. + + +SPI +--- + + SPI drivers are available for both the in-built hardware + (although there is no DMA support yet) and a generic + GPIO based solution. + + +LEDs +---- + + There is support for GPIO based LEDs via a platform driver + in the LED subsystem. + + +Platform Data +------------- + + Whenever a device has platform specific data that is specified + on a per-machine basis, care should be taken to ensure the + following: + + 1) that default data is not left in the device to confuse the + driver if a machine does not set it at startup + + 2) the data should (if possible) be marked as __initdata, + to ensure that the data is thrown away if the machine is + not the one currently in use. + + The best way of doing this is to make a function that + kmalloc()s an area of memory, and copies the __initdata + and then sets the relevant device's platform data. Making + the function `__init` takes care of ensuring it is discarded + with the rest of the initialisation code + + static __init void s3c24xx_xxx_set_platdata(struct xxx_data *pd) + { + struct s3c2410_xxx_mach_info *npd; + + npd = kmalloc(sizeof(struct s3c2410_xxx_mach_info), GFP_KERNEL); + if (npd) { + memcpy(npd, pd, sizeof(struct s3c2410_xxx_mach_info)); + s3c_device_xxx.dev.platform_data = npd; + } else { + printk(KERN_ERR "no memory for xxx platform data\n"); + } + } + + Note, since the code is marked as __init, it should not be + exported outside arch/arm/mach-s3c2410/, or exported to + modules via EXPORT_SYMBOL() and related functions. + + +Port Contributors +----------------- + + Ben Dooks (BJD) + Vincent Sanders + Herbert Potzl + Arnaud Patard (RTP) + Roc Wu + Klaus Fetscher + Dimitry Andric + Shannon Holland + Guillaume Gourat (NexVision) + Christer Weinigel (wingel) (Acer N30) + Lucas Correia Villa Real (S3C2400 port) + + +Document Author +--------------- + +Ben Dooks, Copyright 2004-2006 Simtec Electronics diff --git a/Documentation/arm/Samsung-S3C24XX/S3C2412.txt b/Documentation/arm/Samsung-S3C24XX/S3C2412.txt new file mode 100644 index 000000000..dc1fd362d --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/S3C2412.txt @@ -0,0 +1,120 @@ + S3C2412 ARM Linux Overview + ========================== + +Introduction +------------ + + The S3C2412 is part of the S3C24XX range of ARM9 System-on-Chip CPUs + from Samsung. This part has an ARM926-EJS core, capable of running up + to 266MHz (see data-sheet for more information) + + +Clock +----- + + The core clock code provides a set of clocks to the drivers, and allows + for source selection and a number of other features. + + +Power +----- + + No support for suspend/resume to RAM in the current system. + + +DMA +--- + + No current support for DMA. + + +GPIO +---- + + There is support for setting the GPIO to input/output/special function + and reading or writing to them. + + +UART +---- + + The UART hardware is similar to the S3C2440, and is supported by the + s3c2410 driver in the drivers/serial directory. + + +NAND +---- + + The NAND hardware is similar to the S3C2440, and is supported by the + s3c2410 driver in the drivers/mtd/nand/raw directory. + + +USB Host +-------- + + The USB hardware is similar to the S3C2410, with extended clock source + control. The OHCI portion is supported by the ohci-s3c2410 driver, and + the clock control selection is supported by the core clock code. + + +USB Device +---------- + + No current support in the kernel + + +IRQs +---- + + All the standard, and external interrupt sources are supported. The + extra sub-sources are not yet supported. + + +RTC +--- + + The RTC hardware is similar to the S3C2410, and is supported by the + s3c2410-rtc driver. + + +Watchdog +-------- + + The watchdog hardware is the same as the S3C2410, and is supported by + the s3c2410_wdt driver. + + +MMC/SD/SDIO +----------- + + No current support for the MMC/SD/SDIO block. + +IIC +--- + + The IIC hardware is the same as the S3C2410, and is supported by the + i2c-s3c24xx driver. + + +IIS +--- + + No current support for the IIS interface. + + +SPI +--- + + No current support for the SPI interfaces. + + +ATA +--- + + No current support for the on-board ATA block. + + +Document Author +--------------- + +Ben Dooks, Copyright 2006 Simtec Electronics diff --git a/Documentation/arm/Samsung-S3C24XX/S3C2413.txt b/Documentation/arm/Samsung-S3C24XX/S3C2413.txt new file mode 100644 index 000000000..909bdc7dd --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/S3C2413.txt @@ -0,0 +1,21 @@ + S3C2413 ARM Linux Overview + ========================== + +Introduction +------------ + + The S3C2413 is an extended version of the S3C2412, with an camera + interface and mobile DDR memory support. See the S3C2412 support + documentation for more information. + + +Camera Interface +--------------- + + This block is currently not supported. + + +Document Author +--------------- + +Ben Dooks, Copyright 2006 Simtec Electronics diff --git a/Documentation/arm/Samsung-S3C24XX/SMDK2440.txt b/Documentation/arm/Samsung-S3C24XX/SMDK2440.txt new file mode 100644 index 000000000..429390bd4 --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/SMDK2440.txt @@ -0,0 +1,56 @@ + Samsung/Meritech SMDK2440 + ========================= + +Introduction +------------ + + The SMDK2440 is a two part evaluation board for the Samsung S3C2440 + processor. It includes support for LCD, SmartMedia, Audio, SD and + 10MBit Ethernet, and expansion headers for various signals, including + the camera and unused GPIO. + + +Configuration +------------- + + To set the default configuration, use `make smdk2440_defconfig` which + will configure the common features of this board, or use + `make s3c2410_config` to include support for all s3c2410/s3c2440 machines + + +Support +------- + + Ben Dooks' SMDK2440 site at http://www.fluff.org/ben/smdk2440/ which + includes linux based USB download tools. + + Some of the h1940 patches that can be found from the H1940 project + site at http://www.handhelds.org/projects/h1940.html can also be + applied to this board. + + +Peripherals +----------- + + There is no current support for any of the extra peripherals on the + base-board itself. + + +MTD +--- + + The NAND flash should be supported by the in kernel MTD NAND support, + NOR flash will be added later. + + +Maintainers +----------- + + This board is being maintained by Ben Dooks, for more info, see + http://www.fluff.org/ben/smdk2440/ + + Many thanks to Dimitry Andric of TomTom for the loan of the SMDK2440, + and to Simtec Electronics for allowing me time to work on this. + + +(c) 2004 Ben Dooks diff --git a/Documentation/arm/Samsung-S3C24XX/Suspend.txt b/Documentation/arm/Samsung-S3C24XX/Suspend.txt new file mode 100644 index 000000000..1ca63b3e5 --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/Suspend.txt @@ -0,0 +1,137 @@ + S3C24XX Suspend Support + ======================= + + +Introduction +------------ + + The S3C24XX supports a low-power suspend mode, where the SDRAM is kept + in Self-Refresh mode, and all but the essential peripheral blocks are + powered down. For more information on how this works, please look + at the relevant CPU datasheet from Samsung. + + +Requirements +------------ + + 1) A bootloader that can support the necessary resume operation + + 2) Support for at least 1 source for resume + + 3) CONFIG_PM enabled in the kernel + + 4) Any peripherals that are going to be powered down at the same + time require suspend/resume support. + + +Resuming +-------- + + The S3C2410 user manual defines the process of sending the CPU to + sleep and how it resumes. The default behaviour of the Linux code + is to set the GSTATUS3 register to the physical address of the + code to resume Linux operation. + + GSTATUS4 is currently left alone by the sleep code, and is free to + use for any other purposes (for example, the EB2410ITX uses this to + save memory configuration in). + + +Machine Support +--------------- + + The machine specific functions must call the s3c_pm_init() function + to say that its bootloader is capable of resuming. This can be as + simple as adding the following to the machine's definition: + + INITMACHINE(s3c_pm_init) + + A board can do its own setup before calling s3c_pm_init, if it + needs to setup anything else for power management support. + + There is currently no support for over-riding the default method of + saving the resume address, if your board requires it, then contact + the maintainer and discuss what is required. + + Note, the original method of adding an late_initcall() is wrong, + and will end up initialising all compiled machines' pm init! + + The following is an example of code used for testing wakeup from + an falling edge on IRQ_EINT0: + + +static irqreturn_t button_irq(int irq, void *pw) +{ + return IRQ_HANDLED; +} + +statuc void __init machine_init(void) +{ + ... + + request_irq(IRQ_EINT0, button_irq, IRQF_TRIGGER_FALLING, + "button-irq-eint0", NULL); + + enable_irq_wake(IRQ_EINT0); + + s3c_pm_init(); +} + + +Debugging +--------- + + There are several important things to remember when using PM suspend: + + 1) The uart drivers will disable the clocks to the UART blocks when + suspending, which means that use of printascii() or similar direct + access to the UARTs will cause the debug to stop. + + 2) Whilst the pm code itself will attempt to re-enable the UART clocks, + care should be taken that any external clock sources that the UARTs + rely on are still enabled at that point. + + 3) If any debugging is placed in the resume path, then it must have the + relevant clocks and peripherals setup before use (ie, bootloader). + + For example, if you transmit a character from the UART, the baud + rate and uart controls must be setup beforehand. + + +Configuration +------------- + + The S3C2410 specific configuration in `System Type` defines various + aspects of how the S3C2410 suspend and resume support is configured + + `S3C2410 PM Suspend debug` + + This option prints messages to the serial console before and after + the actual suspend, giving detailed information on what is + happening + + + `S3C2410 PM Suspend Memory CRC` + + Allows the entire memory to be checksummed before and after the + suspend to see if there has been any corruption of the contents. + + Note, the time to calculate the CRC is dependent on the CPU speed + and the size of memory. For an 64Mbyte RAM area on an 200MHz + S3C2410, this can take approximately 4 seconds to complete. + + This support requires the CRC32 function to be enabled. + + + `S3C2410 PM Suspend CRC Chunksize (KiB)` + + Defines the size of memory each CRC chunk covers. A smaller value + will mean that the CRC data block will take more memory, but will + identify any faults with better precision + + +Document Author +--------------- + +Ben Dooks, Copyright 2004 Simtec Electronics + diff --git a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt new file mode 100644 index 000000000..f82b1faef --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt @@ -0,0 +1,93 @@ + S3C24XX USB Host support + ======================== + + + +Introduction +------------ + + This document details the S3C2410/S3C2440 in-built OHCI USB host support. + +Configuration +------------- + + Enable at least the following kernel options: + + menuconfig: + + Device Drivers ---> + USB support ---> + <*> Support for Host-side USB + <*> OHCI HCD support + + + .config: + CONFIG_USB + CONFIG_USB_OHCI_HCD + + + Once these options are configured, the standard set of USB device + drivers can be configured and used. + + +Board Support +------------- + + The driver attaches to a platform device, which will need to be + added by the board specific support file in linux/arch/arm/mach-s3c2410, + such as mach-bast.c or mach-smdk2410.c + + The platform device's platform_data field is only needed if the + board implements extra power control or over-current monitoring. + + The OHCI driver does not ensure the state of the S3C2410's MISCCTRL + register, so if both ports are to be used for the host, then it is + the board support file's responsibility to ensure that the second + port is configured to be connected to the OHCI core. + + +Platform Data +------------- + + See arch/arm/mach-s3c2410/include/mach/usb-control.h for the + descriptions of the platform device data. An implementation + can be found in linux/arch/arm/mach-s3c2410/usb-simtec.c . + + The `struct s3c2410_hcd_info` contains a pair of functions + that get called to enable over-current detection, and to + control the port power status. + + The ports are numbered 0 and 1. + + power_control: + + Called to enable or disable the power on the port. + + enable_oc: + + Called to enable or disable the over-current monitoring. + This should claim or release the resources being used to + check the power condition on the port, such as an IRQ. + + report_oc: + + The OHCI driver fills this field in for the over-current code + to call when there is a change to the over-current state on + an port. The ports argument is a bitmask of 1 bit per port, + with bit X being 1 for an over-current on port X. + + The function s3c2410_usb_report_oc() has been provided to + ensure this is called correctly. + + port[x]: + + This is struct describes each port, 0 or 1. The platform driver + should set the flags field of each port to S3C_HCDFLG_USED if + the port is enabled. + + + +Document Author +--------------- + +Ben Dooks, Copyright 2005 Simtec Electronics diff --git a/Documentation/arm/Samsung/Bootloader-interface.txt b/Documentation/arm/Samsung/Bootloader-interface.txt new file mode 100644 index 000000000..ed494ac0b --- /dev/null +++ b/Documentation/arm/Samsung/Bootloader-interface.txt @@ -0,0 +1,67 @@ + Interface between kernel and boot loaders on Exynos boards + ========================================================== + +Author: Krzysztof Kozlowski +Date : 6 June 2015 + +The document tries to describe currently used interface between Linux kernel +and boot loaders on Samsung Exynos based boards. This is not a definition +of interface but rather a description of existing state, a reference +for information purpose only. + +In the document "boot loader" means any of following: U-boot, proprietary +SBOOT or any other firmware for ARMv7 and ARMv8 initializing the board before +executing kernel. + + +1. Non-Secure mode + +Address: sysram_ns_base_addr +Offset Value Purpose +============================================================================= +0x08 exynos_cpu_resume_ns, mcpm_entry_point System suspend +0x0c 0x00000bad (Magic cookie) System suspend +0x1c exynos4_secondary_startup Secondary CPU boot +0x1c + 4*cpu exynos4_secondary_startup (Exynos4412) Secondary CPU boot +0x20 0xfcba0d10 (Magic cookie) AFTR +0x24 exynos_cpu_resume_ns AFTR +0x28 + 4*cpu 0x8 (Magic cookie, Exynos3250) AFTR + + +2. Secure mode + +Address: sysram_base_addr +Offset Value Purpose +============================================================================= +0x00 exynos4_secondary_startup Secondary CPU boot +0x04 exynos4_secondary_startup (Exynos542x) Secondary CPU boot +4*cpu exynos4_secondary_startup (Exynos4412) Secondary CPU boot +0x20 exynos_cpu_resume (Exynos4210 r1.0) AFTR +0x24 0xfcba0d10 (Magic cookie, Exynos4210 r1.0) AFTR + +Address: pmu_base_addr +Offset Value Purpose +============================================================================= +0x0800 exynos_cpu_resume AFTR, suspend +0x0800 mcpm_entry_point (Exynos542x with MCPM) AFTR, suspend +0x0804 0xfcba0d10 (Magic cookie) AFTR +0x0804 0x00000bad (Magic cookie) System suspend +0x0814 exynos4_secondary_startup (Exynos4210 r1.1) Secondary CPU boot +0x0818 0xfcba0d10 (Magic cookie, Exynos4210 r1.1) AFTR +0x081C exynos_cpu_resume (Exynos4210 r1.1) AFTR + + +3. Other (regardless of secure/non-secure mode) + +Address: pmu_base_addr +Offset Value Purpose +============================================================================= +0x0908 Non-zero Secondary CPU boot up indicator + on Exynos3250 and Exynos542x + + +4. Glossary + +AFTR - ARM Off Top Running, a low power mode, Cortex cores and many other +modules are power gated, except the TOP modules +MCPM - Multi-Cluster Power Management diff --git a/Documentation/arm/Samsung/GPIO.txt b/Documentation/arm/Samsung/GPIO.txt new file mode 100644 index 000000000..795adfd88 --- /dev/null +++ b/Documentation/arm/Samsung/GPIO.txt @@ -0,0 +1,40 @@ + Samsung GPIO implementation + =========================== + +Introduction +------------ + +This outlines the Samsung GPIO implementation and the architecture +specific calls provided alongside the drivers/gpio core. + + +S3C24XX (Legacy) +---------------- + +See Documentation/arm/Samsung-S3C24XX/GPIO.txt for more information +about these devices. Their implementation has been brought into line +with the core samsung implementation described in this document. + + +GPIOLIB integration +------------------- + +The gpio implementation uses gpiolib as much as possible, only providing +specific calls for the items that require Samsung specific handling, such +as pin special-function or pull resistor control. + +GPIO numbering is synchronised between the Samsung and gpiolib system. + + +PIN configuration +----------------- + +Pin configuration is specific to the Samsung architecture, with each SoC +registering the necessary information for the core gpio configuration +implementation to configure pins as necessary. + +The s3c_gpio_cfgpin() and s3c_gpio_setpull() provide the means for a +driver or machine to change gpio configuration. + +See arch/arm/plat-samsung/include/plat/gpio-cfg.h for more information +on these functions. diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt new file mode 100644 index 000000000..8f7309bad --- /dev/null +++ b/Documentation/arm/Samsung/Overview.txt @@ -0,0 +1,86 @@ + Samsung ARM Linux Overview + ========================== + +Introduction +------------ + + The Samsung range of ARM SoCs spans many similar devices, from the initial + ARM9 through to the newest ARM cores. This document shows an overview of + the current kernel support, how to use it and where to find the code + that supports this. + + The currently supported SoCs are: + + - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list + - S3C64XX: S3C6400 and S3C6410 + - S5PC110 / S5PV210 + + +S3C24XX Systems +--------------- + + There is still documentation in Documnetation/arm/Samsung-S3C24XX/ which + deals with the architecture and drivers specific to these devices. + + See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information + on the implementation details and specific support. + + +Configuration +------------- + + A number of configurations are supplied, as there is no current way of + unifying all the SoCs into one kernel. + + s5pc110_defconfig - S5PC110 specific default configuration + s5pv210_defconfig - S5PV210 specific default configuration + + +Layout +------ + + The directory layout is currently being restructured, and consists of + several platform directories and then the machine specific directories + of the CPUs being built for. + + plat-samsung provides the base for all the implementations, and is the + last in the line of include directories that are processed for the build + specific information. It contains the base clock, GPIO and device definitions + to get the system running. + + plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs. + + plat-s5p is for s5p specific builds, and contains common support for the + S5P specific systems. Not all S5Ps use all the features in this directory + due to differences in the hardware. + + +Layout changes +-------------- + + The old plat-s3c and plat-s5pc1xx directories have been removed, with + support moved to either plat-samsung or plat-s5p as necessary. These moves + where to simplify the include and dependency issues involved with having + so many different platform directories. + + +Port Contributors +----------------- + + Ben Dooks (BJD) + Vincent Sanders + Herbert Potzl + Arnaud Patard (RTP) + Roc Wu + Klaus Fetscher + Dimitry Andric + Shannon Holland + Guillaume Gourat (NexVision) + Christer Weinigel (wingel) (Acer N30) + Lucas Correia Villa Real (S3C2400 port) + + +Document Author +--------------- + +Copyright 2009-2010 Ben Dooks <ben-linux@fluff.org> diff --git a/Documentation/arm/Samsung/clksrc-change-registers.awk b/Documentation/arm/Samsung/clksrc-change-registers.awk new file mode 100755 index 000000000..7be1b8aa7 --- /dev/null +++ b/Documentation/arm/Samsung/clksrc-change-registers.awk @@ -0,0 +1,166 @@ +#!/usr/bin/awk -f +# +# Copyright 2010 Ben Dooks <ben-linux@fluff.org> +# +# Released under GPLv2 + +# example usage +# ./clksrc-change-registers.awk arch/arm/plat-s5pc1xx/include/plat/regs-clock.h < src > dst + +function extract_value(s) +{ + eqat = index(s, "=") + comat = index(s, ",") + return substr(s, eqat+2, (comat-eqat)-2) +} + +function remove_brackets(b) +{ + return substr(b, 2, length(b)-2) +} + +function splitdefine(l, p) +{ + r = split(l, tp) + + p[0] = tp[2] + p[1] = remove_brackets(tp[3]) +} + +function find_length(f) +{ + if (0) + printf "find_length " f "\n" > "/dev/stderr" + + if (f ~ /0x1/) + return 1 + else if (f ~ /0x3/) + return 2 + else if (f ~ /0x7/) + return 3 + else if (f ~ /0xf/) + return 4 + + printf "unknown length " f "\n" > "/dev/stderr" + exit +} + +function find_shift(s) +{ + id = index(s, "<") + if (id <= 0) { + printf "cannot find shift " s "\n" > "/dev/stderr" + exit + } + + return substr(s, id+2) +} + + +BEGIN { + if (ARGC < 2) { + print "too few arguments" > "/dev/stderr" + exit + } + +# read the header file and find the mask values that we will need +# to replace and create an associative array of values + + while (getline line < ARGV[1] > 0) { + if (line ~ /\#define.*_MASK/ && + !(line ~ /USB_SIG_MASK/)) { + splitdefine(line, fields) + name = fields[0] + if (0) + printf "MASK " line "\n" > "/dev/stderr" + dmask[name,0] = find_length(fields[1]) + dmask[name,1] = find_shift(fields[1]) + if (0) + printf "=> '" name "' LENGTH=" dmask[name,0] " SHIFT=" dmask[name,1] "\n" > "/dev/stderr" + } else { + } + } + + delete ARGV[1] +} + +/clksrc_clk.*=.*{/ { + shift="" + mask="" + divshift="" + reg_div="" + reg_src="" + indent=1 + + print $0 + + for(; indent >= 1;) { + if ((getline line) <= 0) { + printf "unexpected end of file" > "/dev/stderr" + exit 1; + } + + if (line ~ /\.shift/) { + shift = extract_value(line) + } else if (line ~ /\.mask/) { + mask = extract_value(line) + } else if (line ~ /\.reg_divider/) { + reg_div = extract_value(line) + } else if (line ~ /\.reg_source/) { + reg_src = extract_value(line) + } else if (line ~ /\.divider_shift/) { + divshift = extract_value(line) + } else if (line ~ /{/) { + indent++ + print line + } else if (line ~ /}/) { + indent-- + + if (indent == 0) { + if (0) { + printf "shift '" shift "' ='" dmask[shift,0] "'\n" > "/dev/stderr" + printf "mask '" mask "'\n" > "/dev/stderr" + printf "dshft '" divshift "'\n" > "/dev/stderr" + printf "rdiv '" reg_div "'\n" > "/dev/stderr" + printf "rsrc '" reg_src "'\n" > "/dev/stderr" + } + + generated = mask + sub(reg_src, reg_div, generated) + + if (0) { + printf "/* rsrc " reg_src " */\n" + printf "/* rdiv " reg_div " */\n" + printf "/* shift " shift " */\n" + printf "/* mask " mask " */\n" + printf "/* generated " generated " */\n" + } + + if (reg_div != "") { + printf "\t.reg_div = { " + printf ".reg = " reg_div ", " + printf ".shift = " dmask[generated,1] ", " + printf ".size = " dmask[generated,0] ", " + printf "},\n" + } + + printf "\t.reg_src = { " + printf ".reg = " reg_src ", " + printf ".shift = " dmask[mask,1] ", " + printf ".size = " dmask[mask,0] ", " + + printf "},\n" + + } + + print line + } else { + print line + } + + if (0) + printf indent ":" line "\n" > "/dev/stderr" + } +} + +// && ! /clksrc_clk.*=.*{/ { print $0 } diff --git a/Documentation/arm/Setup b/Documentation/arm/Setup new file mode 100644 index 000000000..0cb1e64bd --- /dev/null +++ b/Documentation/arm/Setup @@ -0,0 +1,129 @@ +Kernel initialisation parameters on ARM Linux +--------------------------------------------- + +The following document describes the kernel initialisation parameter +structure, otherwise known as 'struct param_struct' which is used +for most ARM Linux architectures. + +This structure is used to pass initialisation parameters from the +kernel loader to the Linux kernel proper, and may be short lived +through the kernel initialisation process. As a general rule, it +should not be referenced outside of arch/arm/kernel/setup.c:setup_arch(). + +There are a lot of parameters listed in there, and they are described +below: + + page_size + + This parameter must be set to the page size of the machine, and + will be checked by the kernel. + + nr_pages + + This is the total number of pages of memory in the system. If + the memory is banked, then this should contain the total number + of pages in the system. + + If the system contains separate VRAM, this value should not + include this information. + + ramdisk_size + + This is now obsolete, and should not be used. + + flags + + Various kernel flags, including: + bit 0 - 1 = mount root read only + bit 1 - unused + bit 2 - 0 = load ramdisk + bit 3 - 0 = prompt for ramdisk + + rootdev + + major/minor number pair of device to mount as the root filesystem. + + video_num_cols + video_num_rows + + These two together describe the character size of the dummy console, + or VGA console character size. They should not be used for any other + purpose. + + It's generally a good idea to set these to be either standard VGA, or + the equivalent character size of your fbcon display. This then allows + all the bootup messages to be displayed correctly. + + video_x + video_y + + This describes the character position of cursor on VGA console, and + is otherwise unused. (should not be used for other console types, and + should not be used for other purposes). + + memc_control_reg + + MEMC chip control register for Acorn Archimedes and Acorn A5000 + based machines. May be used differently by different architectures. + + sounddefault + + Default sound setting on Acorn machines. May be used differently by + different architectures. + + adfsdrives + + Number of ADFS/MFM disks. May be used differently by different + architectures. + + bytes_per_char_h + bytes_per_char_v + + These are now obsolete, and should not be used. + + pages_in_bank[4] + + Number of pages in each bank of the systems memory (used for RiscPC). + This is intended to be used on systems where the physical memory + is non-contiguous from the processors point of view. + + pages_in_vram + + Number of pages in VRAM (used on Acorn RiscPC). This value may also + be used by loaders if the size of the video RAM can't be obtained + from the hardware. + + initrd_start + initrd_size + + This describes the kernel virtual start address and size of the + initial ramdisk. + + rd_start + + Start address in sectors of the ramdisk image on a floppy disk. + + system_rev + + system revision number. + + system_serial_low + system_serial_high + + system 64-bit serial number + + mem_fclk_21285 + + The speed of the external oscillator to the 21285 (footbridge), + which control's the speed of the memory bus, timer & serial port. + Depending upon the speed of the cpu its value can be between + 0-66 MHz. If no params are passed or a value of zero is passed, + then a value of 50 Mhz is the default on 21285 architectures. + + paths[8][128] + + These are now obsolete, and should not be used. + + commandline + + Kernel command line parameters. Details can be found elsewhere. diff --git a/Documentation/arm/VFP/release-notes.txt b/Documentation/arm/VFP/release-notes.txt new file mode 100644 index 000000000..28a279570 --- /dev/null +++ b/Documentation/arm/VFP/release-notes.txt @@ -0,0 +1,55 @@ +Release notes for Linux Kernel VFP support code +----------------------------------------------- + +Date: 20 May 2004 +Author: Russell King + +This is the first release of the Linux Kernel VFP support code. It +provides support for the exceptions bounced from VFP hardware found +on ARM926EJ-S. + +This release has been validated against the SoftFloat-2b library by +John R. Hauser using the TestFloat-2a test suite. Details of this +library and test suite can be found at: + + http://www.jhauser.us/arithmetic/SoftFloat.html + +The operations which have been tested with this package are: + + - fdiv + - fsub + - fadd + - fmul + - fcmp + - fcmpe + - fcvtd + - fcvts + - fsito + - ftosi + - fsqrt + +All the above pass softfloat tests with the following exceptions: + +- fadd/fsub shows some differences in the handling of +0 / -0 results + when input operands differ in signs. +- the handling of underflow exceptions is slightly different. If a + result underflows before rounding, but becomes a normalised number + after rounding, we do not signal an underflow exception. + +Other operations which have been tested by basic assembly-only tests +are: + + - fcpy + - fabs + - fneg + - ftoui + - ftosiz + - ftouiz + +The combination operations have not been tested: + + - fmac + - fnmac + - fmsc + - fnmsc + - fnmul diff --git a/Documentation/arm/cluster-pm-race-avoidance.txt b/Documentation/arm/cluster-pm-race-avoidance.txt new file mode 100644 index 000000000..750b6fc24 --- /dev/null +++ b/Documentation/arm/cluster-pm-race-avoidance.txt @@ -0,0 +1,498 @@ +Cluster-wide Power-up/power-down race avoidance algorithm +========================================================= + +This file documents the algorithm which is used to coordinate CPU and +cluster setup and teardown operations and to manage hardware coherency +controls safely. + +The section "Rationale" explains what the algorithm is for and why it is +needed. "Basic model" explains general concepts using a simplified view +of the system. The other sections explain the actual details of the +algorithm in use. + + +Rationale +--------- + +In a system containing multiple CPUs, it is desirable to have the +ability to turn off individual CPUs when the system is idle, reducing +power consumption and thermal dissipation. + +In a system containing multiple clusters of CPUs, it is also desirable +to have the ability to turn off entire clusters. + +Turning entire clusters off and on is a risky business, because it +involves performing potentially destructive operations affecting a group +of independently running CPUs, while the OS continues to run. This +means that we need some coordination in order to ensure that critical +cluster-level operations are only performed when it is truly safe to do +so. + +Simple locking may not be sufficient to solve this problem, because +mechanisms like Linux spinlocks may rely on coherency mechanisms which +are not immediately enabled when a cluster powers up. Since enabling or +disabling those mechanisms may itself be a non-atomic operation (such as +writing some hardware registers and invalidating large caches), other +methods of coordination are required in order to guarantee safe +power-down and power-up at the cluster level. + +The mechanism presented in this document describes a coherent memory +based protocol for performing the needed coordination. It aims to be as +lightweight as possible, while providing the required safety properties. + + +Basic model +----------- + +Each cluster and CPU is assigned a state, as follows: + + DOWN + COMING_UP + UP + GOING_DOWN + + +---------> UP ----------+ + | v + + COMING_UP GOING_DOWN + + ^ | + +--------- DOWN <--------+ + + +DOWN: The CPU or cluster is not coherent, and is either powered off or + suspended, or is ready to be powered off or suspended. + +COMING_UP: The CPU or cluster has committed to moving to the UP state. + It may be part way through the process of initialisation and + enabling coherency. + +UP: The CPU or cluster is active and coherent at the hardware + level. A CPU in this state is not necessarily being used + actively by the kernel. + +GOING_DOWN: The CPU or cluster has committed to moving to the DOWN + state. It may be part way through the process of teardown and + coherency exit. + + +Each CPU has one of these states assigned to it at any point in time. +The CPU states are described in the "CPU state" section, below. + +Each cluster is also assigned a state, but it is necessary to split the +state value into two parts (the "cluster" state and "inbound" state) and +to introduce additional states in order to avoid races between different +CPUs in the cluster simultaneously modifying the state. The cluster- +level states are described in the "Cluster state" section. + +To help distinguish the CPU states from cluster states in this +discussion, the state names are given a CPU_ prefix for the CPU states, +and a CLUSTER_ or INBOUND_ prefix for the cluster states. + + +CPU state +--------- + +In this algorithm, each individual core in a multi-core processor is +referred to as a "CPU". CPUs are assumed to be single-threaded: +therefore, a CPU can only be doing one thing at a single point in time. + +This means that CPUs fit the basic model closely. + +The algorithm defines the following states for each CPU in the system: + + CPU_DOWN + CPU_COMING_UP + CPU_UP + CPU_GOING_DOWN + + cluster setup and + CPU setup complete policy decision + +-----------> CPU_UP ------------+ + | v + + CPU_COMING_UP CPU_GOING_DOWN + + ^ | + +----------- CPU_DOWN <----------+ + policy decision CPU teardown complete + or hardware event + + +The definitions of the four states correspond closely to the states of +the basic model. + +Transitions between states occur as follows. + +A trigger event (spontaneous) means that the CPU can transition to the +next state as a result of making local progress only, with no +requirement for any external event to happen. + + +CPU_DOWN: + + A CPU reaches the CPU_DOWN state when it is ready for + power-down. On reaching this state, the CPU will typically + power itself down or suspend itself, via a WFI instruction or a + firmware call. + + Next state: CPU_COMING_UP + Conditions: none + + Trigger events: + + a) an explicit hardware power-up operation, resulting + from a policy decision on another CPU; + + b) a hardware event, such as an interrupt. + + +CPU_COMING_UP: + + A CPU cannot start participating in hardware coherency until the + cluster is set up and coherent. If the cluster is not ready, + then the CPU will wait in the CPU_COMING_UP state until the + cluster has been set up. + + Next state: CPU_UP + Conditions: The CPU's parent cluster must be in CLUSTER_UP. + Trigger events: Transition of the parent cluster to CLUSTER_UP. + + Refer to the "Cluster state" section for a description of the + CLUSTER_UP state. + + +CPU_UP: + When a CPU reaches the CPU_UP state, it is safe for the CPU to + start participating in local coherency. + + This is done by jumping to the kernel's CPU resume code. + + Note that the definition of this state is slightly different + from the basic model definition: CPU_UP does not mean that the + CPU is coherent yet, but it does mean that it is safe to resume + the kernel. The kernel handles the rest of the resume + procedure, so the remaining steps are not visible as part of the + race avoidance algorithm. + + The CPU remains in this state until an explicit policy decision + is made to shut down or suspend the CPU. + + Next state: CPU_GOING_DOWN + Conditions: none + Trigger events: explicit policy decision + + +CPU_GOING_DOWN: + + While in this state, the CPU exits coherency, including any + operations required to achieve this (such as cleaning data + caches). + + Next state: CPU_DOWN + Conditions: local CPU teardown complete + Trigger events: (spontaneous) + + +Cluster state +------------- + +A cluster is a group of connected CPUs with some common resources. +Because a cluster contains multiple CPUs, it can be doing multiple +things at the same time. This has some implications. In particular, a +CPU can start up while another CPU is tearing the cluster down. + +In this discussion, the "outbound side" is the view of the cluster state +as seen by a CPU tearing the cluster down. The "inbound side" is the +view of the cluster state as seen by a CPU setting the CPU up. + +In order to enable safe coordination in such situations, it is important +that a CPU which is setting up the cluster can advertise its state +independently of the CPU which is tearing down the cluster. For this +reason, the cluster state is split into two parts: + + "cluster" state: The global state of the cluster; or the state + on the outbound side: + + CLUSTER_DOWN + CLUSTER_UP + CLUSTER_GOING_DOWN + + "inbound" state: The state of the cluster on the inbound side. + + INBOUND_NOT_COMING_UP + INBOUND_COMING_UP + + + The different pairings of these states results in six possible + states for the cluster as a whole: + + CLUSTER_UP + +==========> INBOUND_NOT_COMING_UP -------------+ + # | + | + CLUSTER_UP <----+ | + INBOUND_COMING_UP | v + + ^ CLUSTER_GOING_DOWN CLUSTER_GOING_DOWN + # INBOUND_COMING_UP <=== INBOUND_NOT_COMING_UP + + CLUSTER_DOWN | | + INBOUND_COMING_UP <----+ | + | + ^ | + +=========== CLUSTER_DOWN <------------+ + INBOUND_NOT_COMING_UP + + Transitions -----> can only be made by the outbound CPU, and + only involve changes to the "cluster" state. + + Transitions ===##> can only be made by the inbound CPU, and only + involve changes to the "inbound" state, except where there is no + further transition possible on the outbound side (i.e., the + outbound CPU has put the cluster into the CLUSTER_DOWN state). + + The race avoidance algorithm does not provide a way to determine + which exact CPUs within the cluster play these roles. This must + be decided in advance by some other means. Refer to the section + "Last man and first man selection" for more explanation. + + + CLUSTER_DOWN/INBOUND_NOT_COMING_UP is the only state where the + cluster can actually be powered down. + + The parallelism of the inbound and outbound CPUs is observed by + the existence of two different paths from CLUSTER_GOING_DOWN/ + INBOUND_NOT_COMING_UP (corresponding to GOING_DOWN in the basic + model) to CLUSTER_DOWN/INBOUND_COMING_UP (corresponding to + COMING_UP in the basic model). The second path avoids cluster + teardown completely. + + CLUSTER_UP/INBOUND_COMING_UP is equivalent to UP in the basic + model. The final transition to CLUSTER_UP/INBOUND_NOT_COMING_UP + is trivial and merely resets the state machine ready for the + next cycle. + + Details of the allowable transitions follow. + + The next state in each case is notated + + <cluster state>/<inbound state> (<transitioner>) + + where the <transitioner> is the side on which the transition + can occur; either the inbound or the outbound side. + + +CLUSTER_DOWN/INBOUND_NOT_COMING_UP: + + Next state: CLUSTER_DOWN/INBOUND_COMING_UP (inbound) + Conditions: none + Trigger events: + + a) an explicit hardware power-up operation, resulting + from a policy decision on another CPU; + + b) a hardware event, such as an interrupt. + + +CLUSTER_DOWN/INBOUND_COMING_UP: + + In this state, an inbound CPU sets up the cluster, including + enabling of hardware coherency at the cluster level and any + other operations (such as cache invalidation) which are required + in order to achieve this. + + The purpose of this state is to do sufficient cluster-level + setup to enable other CPUs in the cluster to enter coherency + safely. + + Next state: CLUSTER_UP/INBOUND_COMING_UP (inbound) + Conditions: cluster-level setup and hardware coherency complete + Trigger events: (spontaneous) + + +CLUSTER_UP/INBOUND_COMING_UP: + + Cluster-level setup is complete and hardware coherency is + enabled for the cluster. Other CPUs in the cluster can safely + enter coherency. + + This is a transient state, leading immediately to + CLUSTER_UP/INBOUND_NOT_COMING_UP. All other CPUs on the cluster + should consider treat these two states as equivalent. + + Next state: CLUSTER_UP/INBOUND_NOT_COMING_UP (inbound) + Conditions: none + Trigger events: (spontaneous) + + +CLUSTER_UP/INBOUND_NOT_COMING_UP: + + Cluster-level setup is complete and hardware coherency is + enabled for the cluster. Other CPUs in the cluster can safely + enter coherency. + + The cluster will remain in this state until a policy decision is + made to power the cluster down. + + Next state: CLUSTER_GOING_DOWN/INBOUND_NOT_COMING_UP (outbound) + Conditions: none + Trigger events: policy decision to power down the cluster + + +CLUSTER_GOING_DOWN/INBOUND_NOT_COMING_UP: + + An outbound CPU is tearing the cluster down. The selected CPU + must wait in this state until all CPUs in the cluster are in the + CPU_DOWN state. + + When all CPUs are in the CPU_DOWN state, the cluster can be torn + down, for example by cleaning data caches and exiting + cluster-level coherency. + + To avoid wasteful unnecessary teardown operations, the outbound + should check the inbound cluster state for asynchronous + transitions to INBOUND_COMING_UP. Alternatively, individual + CPUs can be checked for entry into CPU_COMING_UP or CPU_UP. + + + Next states: + + CLUSTER_DOWN/INBOUND_NOT_COMING_UP (outbound) + Conditions: cluster torn down and ready to power off + Trigger events: (spontaneous) + + CLUSTER_GOING_DOWN/INBOUND_COMING_UP (inbound) + Conditions: none + Trigger events: + + a) an explicit hardware power-up operation, + resulting from a policy decision on another + CPU; + + b) a hardware event, such as an interrupt. + + +CLUSTER_GOING_DOWN/INBOUND_COMING_UP: + + The cluster is (or was) being torn down, but another CPU has + come online in the meantime and is trying to set up the cluster + again. + + If the outbound CPU observes this state, it has two choices: + + a) back out of teardown, restoring the cluster to the + CLUSTER_UP state; + + b) finish tearing the cluster down and put the cluster + in the CLUSTER_DOWN state; the inbound CPU will + set up the cluster again from there. + + Choice (a) permits the removal of some latency by avoiding + unnecessary teardown and setup operations in situations where + the cluster is not really going to be powered down. + + + Next states: + + CLUSTER_UP/INBOUND_COMING_UP (outbound) + Conditions: cluster-level setup and hardware + coherency complete + Trigger events: (spontaneous) + + CLUSTER_DOWN/INBOUND_COMING_UP (outbound) + Conditions: cluster torn down and ready to power off + Trigger events: (spontaneous) + + +Last man and First man selection +-------------------------------- + +The CPU which performs cluster tear-down operations on the outbound side +is commonly referred to as the "last man". + +The CPU which performs cluster setup on the inbound side is commonly +referred to as the "first man". + +The race avoidance algorithm documented above does not provide a +mechanism to choose which CPUs should play these roles. + + +Last man: + +When shutting down the cluster, all the CPUs involved are initially +executing Linux and hence coherent. Therefore, ordinary spinlocks can +be used to select a last man safely, before the CPUs become +non-coherent. + + +First man: + +Because CPUs may power up asynchronously in response to external wake-up +events, a dynamic mechanism is needed to make sure that only one CPU +attempts to play the first man role and do the cluster-level +initialisation: any other CPUs must wait for this to complete before +proceeding. + +Cluster-level initialisation may involve actions such as configuring +coherency controls in the bus fabric. + +The current implementation in mcpm_head.S uses a separate mutual exclusion +mechanism to do this arbitration. This mechanism is documented in +detail in vlocks.txt. + + +Features and Limitations +------------------------ + +Implementation: + + The current ARM-based implementation is split between + arch/arm/common/mcpm_head.S (low-level inbound CPU operations) and + arch/arm/common/mcpm_entry.c (everything else): + + __mcpm_cpu_going_down() signals the transition of a CPU to the + CPU_GOING_DOWN state. + + __mcpm_cpu_down() signals the transition of a CPU to the CPU_DOWN + state. + + A CPU transitions to CPU_COMING_UP and then to CPU_UP via the + low-level power-up code in mcpm_head.S. This could + involve CPU-specific setup code, but in the current + implementation it does not. + + __mcpm_outbound_enter_critical() and __mcpm_outbound_leave_critical() + handle transitions from CLUSTER_UP to CLUSTER_GOING_DOWN + and from there to CLUSTER_DOWN or back to CLUSTER_UP (in + the case of an aborted cluster power-down). + + These functions are more complex than the __mcpm_cpu_*() + functions due to the extra inter-CPU coordination which + is needed for safe transitions at the cluster level. + + A cluster transitions from CLUSTER_DOWN back to CLUSTER_UP via + the low-level power-up code in mcpm_head.S. This + typically involves platform-specific setup code, + provided by the platform-specific power_up_setup + function registered via mcpm_sync_init. + +Deep topologies: + + As currently described and implemented, the algorithm does not + support CPU topologies involving more than two levels (i.e., + clusters of clusters are not supported). The algorithm could be + extended by replicating the cluster-level states for the + additional topological levels, and modifying the transition + rules for the intermediate (non-outermost) cluster levels. + + +Colophon +-------- + +Originally created and documented by Dave Martin for Linaro Limited, in +collaboration with Nicolas Pitre and Achin Gupta. + +Copyright (C) 2012-2013 Linaro Limited +Distributed under the terms of Version 2 of the GNU General Public +License, as defined in linux/COPYING. diff --git a/Documentation/arm/firmware.txt b/Documentation/arm/firmware.txt new file mode 100644 index 000000000..7f175dbb4 --- /dev/null +++ b/Documentation/arm/firmware.txt @@ -0,0 +1,70 @@ +Interface for registering and calling firmware-specific operations for ARM. +---- +Written by Tomasz Figa <t.figa@samsung.com> + +Some boards are running with secure firmware running in TrustZone secure +world, which changes the way some things have to be initialized. This makes +a need to provide an interface for such platforms to specify available firmware +operations and call them when needed. + +Firmware operations can be specified by filling in a struct firmware_ops +with appropriate callbacks and then registering it with register_firmware_ops() +function. + + void register_firmware_ops(const struct firmware_ops *ops) + +The ops pointer must be non-NULL. More information about struct firmware_ops +and its members can be found in arch/arm/include/asm/firmware.h header. + +There is a default, empty set of operations provided, so there is no need to +set anything if platform does not require firmware operations. + +To call a firmware operation, a helper macro is provided + + #define call_firmware_op(op, ...) \ + ((firmware_ops->op) ? firmware_ops->op(__VA_ARGS__) : (-ENOSYS)) + +the macro checks if the operation is provided and calls it or otherwise returns +-ENOSYS to signal that given operation is not available (for example, to allow +fallback to legacy operation). + +Example of registering firmware operations: + + /* board file */ + + static int platformX_do_idle(void) + { + /* tell platformX firmware to enter idle */ + return 0; + } + + static int platformX_cpu_boot(int i) + { + /* tell platformX firmware to boot CPU i */ + return 0; + } + + static const struct firmware_ops platformX_firmware_ops = { + .do_idle = exynos_do_idle, + .cpu_boot = exynos_cpu_boot, + /* other operations not available on platformX */ + }; + + /* init_early callback of machine descriptor */ + static void __init board_init_early(void) + { + register_firmware_ops(&platformX_firmware_ops); + } + +Example of using a firmware operation: + + /* some platform code, e.g. SMP initialization */ + + __raw_writel(__pa_symbol(exynos4_secondary_startup), + CPU1_BOOT_REG); + + /* Call Exynos specific smc call */ + if (call_firmware_op(cpu_boot, cpu) == -ENOSYS) + cpu_boot_legacy(...); /* Try legacy way */ + + gic_raise_softirq(cpumask_of(cpu), 1); diff --git a/Documentation/arm/kernel_mode_neon.txt b/Documentation/arm/kernel_mode_neon.txt new file mode 100644 index 000000000..b9e060c5b --- /dev/null +++ b/Documentation/arm/kernel_mode_neon.txt @@ -0,0 +1,121 @@ +Kernel mode NEON +================ + +TL;DR summary +------------- +* Use only NEON instructions, or VFP instructions that don't rely on support + code +* Isolate your NEON code in a separate compilation unit, and compile it with + '-march=armv7-a -mfpu=neon -mfloat-abi=softfp' +* Put kernel_neon_begin() and kernel_neon_end() calls around the calls into your + NEON code +* Don't sleep in your NEON code, and be aware that it will be executed with + preemption disabled + + +Introduction +------------ +It is possible to use NEON instructions (and in some cases, VFP instructions) in +code that runs in kernel mode. However, for performance reasons, the NEON/VFP +register file is not preserved and restored at every context switch or taken +exception like the normal register file is, so some manual intervention is +required. Furthermore, special care is required for code that may sleep [i.e., +may call schedule()], as NEON or VFP instructions will be executed in a +non-preemptible section for reasons outlined below. + + +Lazy preserve and restore +------------------------- +The NEON/VFP register file is managed using lazy preserve (on UP systems) and +lazy restore (on both SMP and UP systems). This means that the register file is +kept 'live', and is only preserved and restored when multiple tasks are +contending for the NEON/VFP unit (or, in the SMP case, when a task migrates to +another core). Lazy restore is implemented by disabling the NEON/VFP unit after +every context switch, resulting in a trap when subsequently a NEON/VFP +instruction is issued, allowing the kernel to step in and perform the restore if +necessary. + +Any use of the NEON/VFP unit in kernel mode should not interfere with this, so +it is required to do an 'eager' preserve of the NEON/VFP register file, and +enable the NEON/VFP unit explicitly so no exceptions are generated on first +subsequent use. This is handled by the function kernel_neon_begin(), which +should be called before any kernel mode NEON or VFP instructions are issued. +Likewise, the NEON/VFP unit should be disabled again after use to make sure user +mode will hit the lazy restore trap upon next use. This is handled by the +function kernel_neon_end(). + + +Interruptions in kernel mode +---------------------------- +For reasons of performance and simplicity, it was decided that there shall be no +preserve/restore mechanism for the kernel mode NEON/VFP register contents. This +implies that interruptions of a kernel mode NEON section can only be allowed if +they are guaranteed not to touch the NEON/VFP registers. For this reason, the +following rules and restrictions apply in the kernel: +* NEON/VFP code is not allowed in interrupt context; +* NEON/VFP code is not allowed to sleep; +* NEON/VFP code is executed with preemption disabled. + +If latency is a concern, it is possible to put back to back calls to +kernel_neon_end() and kernel_neon_begin() in places in your code where none of +the NEON registers are live. (Additional calls to kernel_neon_begin() should be +reasonably cheap if no context switch occurred in the meantime) + + +VFP and support code +-------------------- +Earlier versions of VFP (prior to version 3) rely on software support for things +like IEEE-754 compliant underflow handling etc. When the VFP unit needs such +software assistance, it signals the kernel by raising an undefined instruction +exception. The kernel responds by inspecting the VFP control registers and the +current instruction and arguments, and emulates the instruction in software. + +Such software assistance is currently not implemented for VFP instructions +executed in kernel mode. If such a condition is encountered, the kernel will +fail and generate an OOPS. + + +Separating NEON code from ordinary code +--------------------------------------- +The compiler is not aware of the special significance of kernel_neon_begin() and +kernel_neon_end(), i.e., that it is only allowed to issue NEON/VFP instructions +between calls to these respective functions. Furthermore, GCC may generate NEON +instructions of its own at -O3 level if -mfpu=neon is selected, and even if the +kernel is currently compiled at -O2, future changes may result in NEON/VFP +instructions appearing in unexpected places if no special care is taken. + +Therefore, the recommended and only supported way of using NEON/VFP in the +kernel is by adhering to the following rules: +* isolate the NEON code in a separate compilation unit and compile it with + '-march=armv7-a -mfpu=neon -mfloat-abi=softfp'; +* issue the calls to kernel_neon_begin(), kernel_neon_end() as well as the calls + into the unit containing the NEON code from a compilation unit which is *not* + built with the GCC flag '-mfpu=neon' set. + +As the kernel is compiled with '-msoft-float', the above will guarantee that +both NEON and VFP instructions will only ever appear in designated compilation +units at any optimization level. + + +NEON assembler +-------------- +NEON assembler is supported with no additional caveats as long as the rules +above are followed. + + +NEON code generated by GCC +-------------------------- +The GCC option -ftree-vectorize (implied by -O3) tries to exploit implicit +parallelism, and generates NEON code from ordinary C source code. This is fully +supported as long as the rules above are followed. + + +NEON intrinsics +--------------- +NEON intrinsics are also supported. However, as code using NEON intrinsics +relies on the GCC header <arm_neon.h>, (which #includes <stdint.h>), you should +observe the following in addition to the rules above: +* Compile the unit containing the NEON intrinsics with '-ffreestanding' so GCC + uses its builtin version of <stdint.h> (this is a C99 header which the kernel + does not supply); +* Include <arm_neon.h> last, or at least after <linux/types.h> diff --git a/Documentation/arm/kernel_user_helpers.txt b/Documentation/arm/kernel_user_helpers.txt new file mode 100644 index 000000000..567359471 --- /dev/null +++ b/Documentation/arm/kernel_user_helpers.txt @@ -0,0 +1,267 @@ +Kernel-provided User Helpers +============================ + +These are segment of kernel provided user code reachable from user space +at a fixed address in kernel memory. This is used to provide user space +with some operations which require kernel help because of unimplemented +native feature and/or instructions in many ARM CPUs. The idea is for this +code to be executed directly in user mode for best efficiency but which is +too intimate with the kernel counter part to be left to user libraries. +In fact this code might even differ from one CPU to another depending on +the available instruction set, or whether it is a SMP systems. In other +words, the kernel reserves the right to change this code as needed without +warning. Only the entry points and their results as documented here are +guaranteed to be stable. + +This is different from (but doesn't preclude) a full blown VDSO +implementation, however a VDSO would prevent some assembly tricks with +constants that allows for efficient branching to those code segments. And +since those code segments only use a few cycles before returning to user +code, the overhead of a VDSO indirect far call would add a measurable +overhead to such minimalistic operations. + +User space is expected to bypass those helpers and implement those things +inline (either in the code emitted directly by the compiler, or part of +the implementation of a library call) when optimizing for a recent enough +processor that has the necessary native support, but only if resulting +binaries are already to be incompatible with earlier ARM processors due to +usage of similar native instructions for other things. In other words +don't make binaries unable to run on earlier processors just for the sake +of not using these kernel helpers if your compiled code is not going to +use new instructions for other purpose. + +New helpers may be added over time, so an older kernel may be missing some +helpers present in a newer kernel. For this reason, programs must check +the value of __kuser_helper_version (see below) before assuming that it is +safe to call any particular helper. This check should ideally be +performed only once at process startup time, and execution aborted early +if the required helpers are not provided by the kernel version that +process is running on. + +kuser_helper_version +-------------------- + +Location: 0xffff0ffc + +Reference declaration: + + extern int32_t __kuser_helper_version; + +Definition: + + This field contains the number of helpers being implemented by the + running kernel. User space may read this to determine the availability + of a particular helper. + +Usage example: + +#define __kuser_helper_version (*(int32_t *)0xffff0ffc) + +void check_kuser_version(void) +{ + if (__kuser_helper_version < 2) { + fprintf(stderr, "can't do atomic operations, kernel too old\n"); + abort(); + } +} + +Notes: + + User space may assume that the value of this field never changes + during the lifetime of any single process. This means that this + field can be read once during the initialisation of a library or + startup phase of a program. + +kuser_get_tls +------------- + +Location: 0xffff0fe0 + +Reference prototype: + + void * __kuser_get_tls(void); + +Input: + + lr = return address + +Output: + + r0 = TLS value + +Clobbered registers: + + none + +Definition: + + Get the TLS value as previously set via the __ARM_NR_set_tls syscall. + +Usage example: + +typedef void * (__kuser_get_tls_t)(void); +#define __kuser_get_tls (*(__kuser_get_tls_t *)0xffff0fe0) + +void foo() +{ + void *tls = __kuser_get_tls(); + printf("TLS = %p\n", tls); +} + +Notes: + + - Valid only if __kuser_helper_version >= 1 (from kernel version 2.6.12). + +kuser_cmpxchg +------------- + +Location: 0xffff0fc0 + +Reference prototype: + + int __kuser_cmpxchg(int32_t oldval, int32_t newval, volatile int32_t *ptr); + +Input: + + r0 = oldval + r1 = newval + r2 = ptr + lr = return address + +Output: + + r0 = success code (zero or non-zero) + C flag = set if r0 == 0, clear if r0 != 0 + +Clobbered registers: + + r3, ip, flags + +Definition: + + Atomically store newval in *ptr only if *ptr is equal to oldval. + Return zero if *ptr was changed or non-zero if no exchange happened. + The C flag is also set if *ptr was changed to allow for assembly + optimization in the calling code. + +Usage example: + +typedef int (__kuser_cmpxchg_t)(int oldval, int newval, volatile int *ptr); +#define __kuser_cmpxchg (*(__kuser_cmpxchg_t *)0xffff0fc0) + +int atomic_add(volatile int *ptr, int val) +{ + int old, new; + + do { + old = *ptr; + new = old + val; + } while(__kuser_cmpxchg(old, new, ptr)); + + return new; +} + +Notes: + + - This routine already includes memory barriers as needed. + + - Valid only if __kuser_helper_version >= 2 (from kernel version 2.6.12). + +kuser_memory_barrier +-------------------- + +Location: 0xffff0fa0 + +Reference prototype: + + void __kuser_memory_barrier(void); + +Input: + + lr = return address + +Output: + + none + +Clobbered registers: + + none + +Definition: + + Apply any needed memory barrier to preserve consistency with data modified + manually and __kuser_cmpxchg usage. + +Usage example: + +typedef void (__kuser_dmb_t)(void); +#define __kuser_dmb (*(__kuser_dmb_t *)0xffff0fa0) + +Notes: + + - Valid only if __kuser_helper_version >= 3 (from kernel version 2.6.15). + +kuser_cmpxchg64 +--------------- + +Location: 0xffff0f60 + +Reference prototype: + + int __kuser_cmpxchg64(const int64_t *oldval, + const int64_t *newval, + volatile int64_t *ptr); + +Input: + + r0 = pointer to oldval + r1 = pointer to newval + r2 = pointer to target value + lr = return address + +Output: + + r0 = success code (zero or non-zero) + C flag = set if r0 == 0, clear if r0 != 0 + +Clobbered registers: + + r3, lr, flags + +Definition: + + Atomically store the 64-bit value pointed by *newval in *ptr only if *ptr + is equal to the 64-bit value pointed by *oldval. Return zero if *ptr was + changed or non-zero if no exchange happened. + + The C flag is also set if *ptr was changed to allow for assembly + optimization in the calling code. + +Usage example: + +typedef int (__kuser_cmpxchg64_t)(const int64_t *oldval, + const int64_t *newval, + volatile int64_t *ptr); +#define __kuser_cmpxchg64 (*(__kuser_cmpxchg64_t *)0xffff0f60) + +int64_t atomic_add64(volatile int64_t *ptr, int64_t val) +{ + int64_t old, new; + + do { + old = *ptr; + new = old + val; + } while(__kuser_cmpxchg64(&old, &new, ptr)); + + return new; +} + +Notes: + + - This routine already includes memory barriers as needed. + + - Due to the length of this sequence, this spans 2 conventional kuser + "slots", therefore 0xffff0f80 is not used as a valid entry point. + + - Valid only if __kuser_helper_version >= 5 (from kernel version 3.1). diff --git a/Documentation/arm/keystone/Overview.txt b/Documentation/arm/keystone/Overview.txt new file mode 100644 index 000000000..400c0c270 --- /dev/null +++ b/Documentation/arm/keystone/Overview.txt @@ -0,0 +1,55 @@ + TI Keystone Linux Overview + -------------------------- + +Introduction +------------ +Keystone range of SoCs are based on ARM Cortex-A15 MPCore Processors +and c66x DSP cores. This document describes essential information required +for users to run Linux on Keystone based EVMs from Texas Instruments. + +Following SoCs & EVMs are currently supported:- + +------------ K2HK SoC and EVM -------------------------------------------------- + +a.k.a Keystone 2 Hawking/Kepler SoC +TCI6636K2H & TCI6636K2K: See documentation at + http://www.ti.com/product/tci6638k2k + http://www.ti.com/product/tci6638k2h + +EVM: +http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx + +------------ K2E SoC and EVM --------------------------------------------------- + +a.k.a Keystone 2 Edison SoC +K2E - 66AK2E05: See documentation at + http://www.ti.com/product/66AK2E05/technicaldocuments + +EVM: +https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html + +------------ K2L SoC and EVM --------------------------------------------------- + +a.k.a Keystone 2 Lamarr SoC +K2L - TCI6630K2L: See documentation at + http://www.ti.com/product/TCI6630K2L/technicaldocuments +EVM: +https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html + +Configuration +------------- + +All of the K2 SoCs/EVMs share a common defconfig, keystone_defconfig and same +image is used to boot on individual EVMs. The platform configuration is +specified through DTS. Following are the DTS used:- + K2HK EVM : k2hk-evm.dts + K2E EVM : k2e-evm.dts + K2L EVM : k2l-evm.dts + +The device tree documentation for the keystone machines are located at + Documentation/devicetree/bindings/arm/keystone/keystone.txt + +Document Author +--------------- +Murali Karicheri <m-karicheri2@ti.com> +Copyright 2015 Texas Instruments diff --git a/Documentation/arm/keystone/knav-qmss.txt b/Documentation/arm/keystone/knav-qmss.txt new file mode 100644 index 000000000..fcdb9fd5f --- /dev/null +++ b/Documentation/arm/keystone/knav-qmss.txt @@ -0,0 +1,56 @@ +* Texas Instruments Keystone Navigator Queue Management SubSystem driver + +Driver source code path + drivers/soc/ti/knav_qmss.c + drivers/soc/ti/knav_qmss_acc.c + +The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of +the main hardware sub system which forms the backbone of the Keystone +multi-core Navigator. QMSS consist of queue managers, packed-data structure +processors(PDSP), linking RAM, descriptor pools and infrastructure +Packet DMA. +The Queue Manager is a hardware module that is responsible for accelerating +management of the packet queues. Packets are queued/de-queued by writing or +reading descriptor address to a particular memory mapped location. The PDSPs +perform QMSS related functions like accumulation, QoS, or event management. +Linking RAM registers are used to link the descriptors which are stored in +descriptor RAM. Descriptor RAM is configurable as internal or external memory. +The QMSS driver manages the PDSP setups, linking RAM regions, +queue pool management (allocation, push, pop and notify) and descriptor +pool management. + +knav qmss driver provides a set of APIs to drivers to open/close qmss queues, +allocate descriptor pools, map the descriptors, push/pop to queues etc. For +details of the available APIs, please refers to include/linux/soc/ti/knav_qmss.h + +DT documentation is available at +Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt + +Accumulator QMSS queues using PDSP firmware +============================================ +The QMSS PDSP firmware support accumulator channel that can monitor a single +queue or multiple contiguous queues. drivers/soc/ti/knav_qmss_acc.c is the +driver that interface with the accumulator PDSP. This configures +accumulator channels defined in DTS (example in DT documentation) to monitor +1 or 32 queues per channel. More description on the firmware is available in +CPPI/QMSS Low Level Driver document (docs/CPPI_QMSS_LLD_SDS.pdf) at + git://git.ti.com/keystone-rtos/qmss-lld.git + +k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports upto 48 accumulator +channels. This firmware is available under ti-keystone folder of +firmware.git at + git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git + +To use copy the firmware image to lib/firmware folder of the initramfs or +ubifs file system and provide a sym link to k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin +in the file system and boot up the kernel. User would see + + "firmware file ks2_qmss_pdsp_acc48.bin downloaded for PDSP" + +in the boot up log if loading of firmware to PDSP is successful. + +Use of accumulated queues requires the firmware image to be present in the +file system. The driver doesn't acc queues to the supported queue range if +PDSP is not running in the SoC. The API call fails if there is a queue open +request to an acc queue and PDSP is not running. So make sure to copy firmware +to file system before using these queue types. diff --git a/Documentation/arm/mem_alignment b/Documentation/arm/mem_alignment new file mode 100644 index 000000000..6335fcacb --- /dev/null +++ b/Documentation/arm/mem_alignment @@ -0,0 +1,58 @@ +Too many problems poped up because of unnoticed misaligned memory access in +kernel code lately. Therefore the alignment fixup is now unconditionally +configured in for SA11x0 based targets. According to Alan Cox, this is a +bad idea to configure it out, but Russell King has some good reasons for +doing so on some f***ed up ARM architectures like the EBSA110. However +this is not the case on many design I'm aware of, like all SA11x0 based +ones. + +Of course this is a bad idea to rely on the alignment trap to perform +unaligned memory access in general. If those access are predictable, you +are better to use the macros provided by include/asm/unaligned.h. The +alignment trap can fixup misaligned access for the exception cases, but at +a high performance cost. It better be rare. + +Now for user space applications, it is possible to configure the alignment +trap to SIGBUS any code performing unaligned access (good for debugging bad +code), or even fixup the access by software like for kernel code. The later +mode isn't recommended for performance reasons (just think about the +floating point emulation that works about the same way). Fix your code +instead! + +Please note that randomly changing the behaviour without good thought is +real bad - it changes the behaviour of all unaligned instructions in user +space, and might cause programs to fail unexpectedly. + +To change the alignment trap behavior, simply echo a number into +/proc/cpu/alignment. The number is made up from various bits: + +bit behavior when set +--- ----------------- + +0 A user process performing an unaligned memory access + will cause the kernel to print a message indicating + process name, pid, pc, instruction, address, and the + fault code. + +1 The kernel will attempt to fix up the user process + performing the unaligned access. This is of course + slow (think about the floating point emulator) and + not recommended for production use. + +2 The kernel will send a SIGBUS signal to the user process + performing the unaligned access. + +Note that not all combinations are supported - only values 0 through 5. +(6 and 7 don't make sense). + +For example, the following will turn on the warnings, but without +fixing up or sending SIGBUS signals: + + echo 1 > /proc/cpu/alignment + +You can also read the content of the same file to get statistical +information on unaligned access occurrences plus the current mode of +operation for user space code. + + +Nicolas Pitre, Mar 13, 2001. Modified Russell King, Nov 30, 2001. diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt new file mode 100644 index 000000000..546a39048 --- /dev/null +++ b/Documentation/arm/memory.txt @@ -0,0 +1,88 @@ + Kernel Memory Layout on ARM Linux + + Russell King <rmk@arm.linux.org.uk> + November 17, 2005 (2.6.15) + +This document describes the virtual memory layout which the Linux +kernel uses for ARM processors. It indicates which regions are +free for platforms to use, and which are used by generic code. + +The ARM CPU is capable of addressing a maximum of 4GB virtual memory +space, and this must be shared between user space processes, the +kernel, and hardware devices. + +As the ARM architecture matures, it becomes necessary to reserve +certain regions of VM space for use for new facilities; therefore +this document may reserve more VM space over time. + +Start End Use +-------------------------------------------------------------------------- +ffff8000 ffffffff copy_user_page / clear_user_page use. + For SA11xx and Xscale, this is used to + setup a minicache mapping. + +ffff4000 ffffffff cache aliasing on ARMv6 and later CPUs. + +ffff1000 ffff7fff Reserved. + Platforms must not use this address range. + +ffff0000 ffff0fff CPU vector page. + The CPU vectors are mapped here if the + CPU supports vector relocation (control + register V bit.) + +fffe0000 fffeffff XScale cache flush area. This is used + in proc-xscale.S to flush the whole data + cache. (XScale does not have TCM.) + +fffe8000 fffeffff DTCM mapping area for platforms with + DTCM mounted inside the CPU. + +fffe0000 fffe7fff ITCM mapping area for platforms with + ITCM mounted inside the CPU. + +ffc00000 ffefffff Fixmap mapping region. Addresses provided + by fix_to_virt() will be located here. + +fee00000 feffffff Mapping of PCI I/O space. This is a static + mapping within the vmalloc space. + +VMALLOC_START VMALLOC_END-1 vmalloc() / ioremap() space. + Memory returned by vmalloc/ioremap will + be dynamically placed in this region. + Machine specific static mappings are also + located here through iotable_init(). + VMALLOC_START is based upon the value + of the high_memory variable, and VMALLOC_END + is equal to 0xff800000. + +PAGE_OFFSET high_memory-1 Kernel direct-mapped RAM region. + This maps the platforms RAM, and typically + maps all platform RAM in a 1:1 relationship. + +PKMAP_BASE PAGE_OFFSET-1 Permanent kernel mappings + One way of mapping HIGHMEM pages into kernel + space. + +MODULES_VADDR MODULES_END-1 Kernel module space + Kernel modules inserted via insmod are + placed here using dynamic mappings. + +00001000 TASK_SIZE-1 User space mappings + Per-thread mappings are placed here via + the mmap() system call. + +00000000 00000fff CPU vector page / null pointer trap + CPUs which do not support vector remapping + place their vector page here. NULL pointer + dereferences by both the kernel and user + space are also caught via this mapping. + +Please note that mappings which collide with the above areas may result +in a non-bootable kernel, or may cause the kernel to (eventually) panic +at run time. + +Since future CPUs may impact the kernel mapping layout, user programs +must not access any memory which is not mapped inside their 0x0001000 +to TASK_SIZE address range. If they wish to access these areas, they +must set up their own mappings using open() and mmap(). diff --git a/Documentation/arm/nwfpe/NOTES b/Documentation/arm/nwfpe/NOTES new file mode 100644 index 000000000..40577b5a4 --- /dev/null +++ b/Documentation/arm/nwfpe/NOTES @@ -0,0 +1,29 @@ +There seems to be a problem with exp(double) and our emulator. I haven't +been able to track it down yet. This does not occur with the emulator +supplied by Russell King. + +I also found one oddity in the emulator. I don't think it is serious but +will point it out. The ARM calling conventions require floating point +registers f4-f7 to be preserved over a function call. The compiler quite +often uses an stfe instruction to save f4 on the stack upon entry to a +function, and an ldfe instruction to restore it before returning. + +I was looking at some code, that calculated a double result, stored it in f4 +then made a function call. Upon return from the function call the number in +f4 had been converted to an extended value in the emulator. + +This is a side effect of the stfe instruction. The double in f4 had to be +converted to extended, then stored. If an lfm/sfm combination had been used, +then no conversion would occur. This has performance considerations. The +result from the function call and f4 were used in a multiplication. If the +emulator sees a multiply of a double and extended, it promotes the double to +extended, then does the multiply in extended precision. + +This code will cause this problem: + +double x, y, z; +z = log(x)/log(y); + +The result of log(x) (a double) will be calculated, returned in f0, then +moved to f4 to preserve it over the log(y) call. The division will be done +in extended precision, due to the stfe instruction used to save f4 in log(y). diff --git a/Documentation/arm/nwfpe/README b/Documentation/arm/nwfpe/README new file mode 100644 index 000000000..771871de0 --- /dev/null +++ b/Documentation/arm/nwfpe/README @@ -0,0 +1,70 @@ +This directory contains the version 0.92 test release of the NetWinder +Floating Point Emulator. + +The majority of the code was written by me, Scott Bambrough It is +written in C, with a small number of routines in inline assembler +where required. It was written quickly, with a goal of implementing a +working version of all the floating point instructions the compiler +emits as the first target. I have attempted to be as optimal as +possible, but there remains much room for improvement. + +I have attempted to make the emulator as portable as possible. One of +the problems is with leading underscores on kernel symbols. Elf +kernels have no leading underscores, a.out compiled kernels do. I +have attempted to use the C_SYMBOL_NAME macro wherever this may be +important. + +Another choice I made was in the file structure. I have attempted to +contain all operating system specific code in one module (fpmodule.*). +All the other files contain emulator specific code. This should allow +others to port the emulator to NetBSD for instance relatively easily. + +The floating point operations are based on SoftFloat Release 2, by +John Hauser. SoftFloat is a software implementation of floating-point +that conforms to the IEC/IEEE Standard for Binary Floating-point +Arithmetic. As many as four formats are supported: single precision, +double precision, extended double precision, and quadruple precision. +All operations required by the standard are implemented, except for +conversions to and from decimal. We use only the single precision, +double precision and extended double precision formats. The port of +SoftFloat to the ARM was done by Phil Blundell, based on an earlier +port of SoftFloat version 1 by Neil Carson for NetBSD/arm32. + +The file README.FPE contains a description of what has been implemented +so far in the emulator. The file TODO contains a information on what +remains to be done, and other ideas for the emulator. + +Bug reports, comments, suggestions should be directed to me at +<scottb@netwinder.org>. General reports of "this program doesn't +work correctly when your emulator is installed" are useful for +determining that bugs still exist; but are virtually useless when +attempting to isolate the problem. Please report them, but don't +expect quick action. Bugs still exist. The problem remains in isolating +which instruction contains the bug. Small programs illustrating a specific +problem are a godsend. + +Legal Notices +------------- + +The NetWinder Floating Point Emulator is free software. Everything Rebel.com +has written is provided under the GNU GPL. See the file COPYING for copying +conditions. Excluded from the above is the SoftFloat code. John Hauser's +legal notice for SoftFloat is included below. + +------------------------------------------------------------------------------- +SoftFloat Legal Notice + +SoftFloat was written by John R. Hauser. This work was made possible in +part by the International Computer Science Institute, located at Suite 600, +1947 Center Street, Berkeley, California 94704. Funding was partially +provided by the National Science Foundation under grant MIP-9311980. The +original version of this code was written as part of a project to build +a fixed-point vector processor in collaboration with the University of +California at Berkeley, overseen by Profs. Nelson Morgan and John Wawrzynek. + +THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort +has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT +TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO +PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY +AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE. +------------------------------------------------------------------------------- diff --git a/Documentation/arm/nwfpe/README.FPE b/Documentation/arm/nwfpe/README.FPE new file mode 100644 index 000000000..26f5d7bb9 --- /dev/null +++ b/Documentation/arm/nwfpe/README.FPE @@ -0,0 +1,156 @@ +The following describes the current state of the NetWinder's floating point +emulator. + +In the following nomenclature is used to describe the floating point +instructions. It follows the conventions in the ARM manual. + +<S|D|E> = <single|double|extended>, no default +{P|M|Z} = {round to +infinity,round to -infinity,round to zero}, + default = round to nearest + +Note: items enclosed in {} are optional. + +Floating Point Coprocessor Data Transfer Instructions (CPDT) +------------------------------------------------------------ + +LDF/STF - load and store floating + +<LDF|STF>{cond}<S|D|E> Fd, Rn +<LDF|STF>{cond}<S|D|E> Fd, [Rn, #<expression>]{!} +<LDF|STF>{cond}<S|D|E> Fd, [Rn], #<expression> + +These instructions are fully implemented. + +LFM/SFM - load and store multiple floating + +Form 1 syntax: +<LFM|SFM>{cond}<S|D|E> Fd, <count>, [Rn] +<LFM|SFM>{cond}<S|D|E> Fd, <count>, [Rn, #<expression>]{!} +<LFM|SFM>{cond}<S|D|E> Fd, <count>, [Rn], #<expression> + +Form 2 syntax: +<LFM|SFM>{cond}<FD,EA> Fd, <count>, [Rn]{!} + +These instructions are fully implemented. They store/load three words +for each floating point register into the memory location given in the +instruction. The format in memory is unlikely to be compatible with +other implementations, in particular the actual hardware. Specific +mention of this is made in the ARM manuals. + +Floating Point Coprocessor Register Transfer Instructions (CPRT) +---------------------------------------------------------------- + +Conversions, read/write status/control register instructions + +FLT{cond}<S,D,E>{P,M,Z} Fn, Rd Convert integer to floating point +FIX{cond}{P,M,Z} Rd, Fn Convert floating point to integer +WFS{cond} Rd Write floating point status register +RFS{cond} Rd Read floating point status register +WFC{cond} Rd Write floating point control register +RFC{cond} Rd Read floating point control register + +FLT/FIX are fully implemented. + +RFS/WFS are fully implemented. + +RFC/WFC are fully implemented. RFC/WFC are supervisor only instructions, and +presently check the CPU mode, and do an invalid instruction trap if not called +from supervisor mode. + +Compare instructions + +CMF{cond} Fn, Fm Compare floating +CMFE{cond} Fn, Fm Compare floating with exception +CNF{cond} Fn, Fm Compare negated floating +CNFE{cond} Fn, Fm Compare negated floating with exception + +These are fully implemented. + +Floating Point Coprocessor Data Instructions (CPDT) +--------------------------------------------------- + +Dyadic operations: + +ADF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - add +SUF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - subtract +RSF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse subtract +MUF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - multiply +DVF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - divide +RDV{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse divide + +These are fully implemented. + +FML{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - fast multiply +FDV{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - fast divide +FRD{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - fast reverse divide + +These are fully implemented as well. They use the same algorithm as the +non-fast versions. Hence, in this implementation their performance is +equivalent to the MUF/DVF/RDV instructions. This is acceptable according +to the ARM manual. The manual notes these are defined only for single +operands, on the actual FPA11 hardware they do not work for double or +extended precision operands. The emulator currently does not check +the requested permissions conditions, and performs the requested operation. + +RMF{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - IEEE remainder + +This is fully implemented. + +Monadic operations: + +MVF{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - move +MNF{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - move negated + +These are fully implemented. + +ABS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - absolute value +SQT{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - square root +RND{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - round + +These are fully implemented. + +URD{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - unnormalized round +NRM{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - normalize + +These are implemented. URD is implemented using the same code as the RND +instruction. Since URD cannot return a unnormalized number, NRM becomes +a NOP. + +Library calls: + +POW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - power +RPW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse power +POL{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - polar angle (arctan2) + +LOG{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base 10 +LGN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base e +EXP{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - exponent +SIN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - sine +COS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - cosine +TAN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - tangent +ASN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arcsine +ACS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arccosine +ATN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arctangent + +These are not implemented. They are not currently issued by the compiler, +and are handled by routines in libc. These are not implemented by the FPA11 +hardware, but are handled by the floating point support code. They should +be implemented in future versions. + +Signalling: + +Signals are implemented. However current ELF kernels produced by Rebel.com +have a bug in them that prevents the module from generating a SIGFPE. This +is caused by a failure to alias fp_current to the kernel variable +current_set[0] correctly. + +The kernel provided with this distribution (vmlinux-nwfpe-0.93) contains +a fix for this problem and also incorporates the current version of the +emulator directly. It is possible to run with no floating point module +loaded with this kernel. It is provided as a demonstration of the +technology and for those who want to do floating point work that depends +on signals. It is not strictly necessary to use the module. + +A module (either the one provided by Russell King, or the one in this +distribution) can be loaded to replace the functionality of the emulator +built into the kernel. diff --git a/Documentation/arm/nwfpe/TODO b/Documentation/arm/nwfpe/TODO new file mode 100644 index 000000000..8027061b6 --- /dev/null +++ b/Documentation/arm/nwfpe/TODO @@ -0,0 +1,67 @@ +TODO LIST +--------- + +POW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - power +RPW{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - reverse power +POL{cond}<S|D|E>{P,M,Z} Fd, Fn, <Fm,#value> - polar angle (arctan2) + +LOG{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base 10 +LGN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - logarithm to base e +EXP{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - exponent +SIN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - sine +COS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - cosine +TAN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - tangent +ASN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arcsine +ACS{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arccosine +ATN{cond}<S|D|E>{P,M,Z} Fd, <Fm,#value> - arctangent + +These are not implemented. They are not currently issued by the compiler, +and are handled by routines in libc. These are not implemented by the FPA11 +hardware, but are handled by the floating point support code. They should +be implemented in future versions. + +There are a couple of ways to approach the implementation of these. One +method would be to use accurate table methods for these routines. I have +a couple of papers by S. Gal from IBM's research labs in Haifa, Israel that +seem to promise extreme accuracy (in the order of 99.8%) and reasonable speed. +These methods are used in GLIBC for some of the transcendental functions. + +Another approach, which I know little about is CORDIC. This stands for +Coordinate Rotation Digital Computer, and is a method of computing +transcendental functions using mostly shifts and adds and a few +multiplications and divisions. The ARM excels at shifts and adds, +so such a method could be promising, but requires more research to +determine if it is feasible. + +Rounding Methods + +The IEEE standard defines 4 rounding modes. Round to nearest is the +default, but rounding to + or - infinity or round to zero are also allowed. +Many architectures allow the rounding mode to be specified by modifying bits +in a control register. Not so with the ARM FPA11 architecture. To change +the rounding mode one must specify it with each instruction. + +This has made porting some benchmarks difficult. It is possible to +introduce such a capability into the emulator. The FPCR contains +bits describing the rounding mode. The emulator could be altered to +examine a flag, which if set forced it to ignore the rounding mode in +the instruction, and use the mode specified in the bits in the FPCR. + +This would require a method of getting/setting the flag, and the bits +in the FPCR. This requires a kernel call in ArmLinux, as WFC/RFC are +supervisor only instructions. If anyone has any ideas or comments I +would like to hear them. + +[NOTE: pulled out from some docs on ARM floating point, specifically + for the Acorn FPE, but not limited to it: + + The floating point control register (FPCR) may only be present in some + implementations: it is there to control the hardware in an implementation- + specific manner, for example to disable the floating point system. The user + mode of the ARM is not permitted to use this register (since the right is + reserved to alter it between implementations) and the WFC and RFC + instructions will trap if tried in user mode. + + Hence, the answer is yes, you could do this, but then you will run a high + risk of becoming isolated if and when hardware FP emulation comes out + -- Russell]. diff --git a/Documentation/arm/pxa/mfp.txt b/Documentation/arm/pxa/mfp.txt new file mode 100644 index 000000000..0b7cab978 --- /dev/null +++ b/Documentation/arm/pxa/mfp.txt @@ -0,0 +1,286 @@ + MFP Configuration for PXA2xx/PXA3xx Processors + + Eric Miao <eric.miao@marvell.com> + +MFP stands for Multi-Function Pin, which is the pin-mux logic on PXA3xx and +later PXA series processors. This document describes the existing MFP API, +and how board/platform driver authors could make use of it. + + Basic Concept +=============== + +Unlike the GPIO alternate function settings on PXA25x and PXA27x, a new MFP +mechanism is introduced from PXA3xx to completely move the pin-mux functions +out of the GPIO controller. In addition to pin-mux configurations, the MFP +also controls the low power state, driving strength, pull-up/down and event +detection of each pin. Below is a diagram of internal connections between +the MFP logic and the remaining SoC peripherals: + + +--------+ + | |--(GPIO19)--+ + | GPIO | | + | |--(GPIO...) | + +--------+ | + | +---------+ + +--------+ +------>| | + | PWM2 |--(PWM_OUT)-------->| MFP | + +--------+ +------>| |-------> to external PAD + | +---->| | + +--------+ | | +-->| | + | SSP2 |---(TXD)----+ | | +---------+ + +--------+ | | + | | + +--------+ | | + | Keypad |--(MKOUT4)----+ | + +--------+ | + | + +--------+ | + | UART2 |---(TXD)--------+ + +--------+ + +NOTE: the external pad is named as MFP_PIN_GPIO19, it doesn't necessarily +mean it's dedicated for GPIO19, only as a hint that internally this pin +can be routed from GPIO19 of the GPIO controller. + +To better understand the change from PXA25x/PXA27x GPIO alternate function +to this new MFP mechanism, here are several key points: + + 1. GPIO controller on PXA3xx is now a dedicated controller, same as other + internal controllers like PWM, SSP and UART, with 128 internal signals + which can be routed to external through one or more MFPs (e.g. GPIO<0> + can be routed through either MFP_PIN_GPIO0 as well as MFP_PIN_GPIO0_2, + see arch/arm/mach-pxa/mfp-pxa300.h) + + 2. Alternate function configuration is removed from this GPIO controller, + the remaining functions are pure GPIO-specific, i.e. + + - GPIO signal level control + - GPIO direction control + - GPIO level change detection + + 3. Low power state for each pin is now controlled by MFP, this means the + PGSRx registers on PXA2xx are now useless on PXA3xx + + 4. Wakeup detection is now controlled by MFP, PWER does not control the + wakeup from GPIO(s) any more, depending on the sleeping state, ADxER + (as defined in pxa3xx-regs.h) controls the wakeup from MFP + +NOTE: with such a clear separation of MFP and GPIO, by GPIO<xx> we normally +mean it is a GPIO signal, and by MFP<xxx> or pin xxx, we mean a physical +pad (or ball). + + MFP API Usage +=============== + +For board code writers, here are some guidelines: + +1. include ONE of the following header files in your <board>.c: + + - #include "mfp-pxa25x.h" + - #include "mfp-pxa27x.h" + - #include "mfp-pxa300.h" + - #include "mfp-pxa320.h" + - #include "mfp-pxa930.h" + + NOTE: only one file in your <board>.c, depending on the processors used, + because pin configuration definitions may conflict in these file (i.e. + same name, different meaning and settings on different processors). E.g. + for zylonite platform, which support both PXA300/PXA310 and PXA320, two + separate files are introduced: zylonite_pxa300.c and zylonite_pxa320.c + (in addition to handle MFP configuration differences, they also handle + the other differences between the two combinations). + + NOTE: PXA300 and PXA310 are almost identical in pin configurations (with + PXA310 supporting some additional ones), thus the difference is actually + covered in a single mfp-pxa300.h. + +2. prepare an array for the initial pin configurations, e.g.: + + static unsigned long mainstone_pin_config[] __initdata = { + /* Chip Select */ + GPIO15_nCS_1, + + /* LCD - 16bpp Active TFT */ + GPIOxx_TFT_LCD_16BPP, + GPIO16_PWM0_OUT, /* Backlight */ + + /* MMC */ + GPIO32_MMC_CLK, + GPIO112_MMC_CMD, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + + ... + + /* GPIO */ + GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, + }; + + a) once the pin configurations are passed to pxa{2xx,3xx}_mfp_config(), + and written to the actual registers, they are useless and may discard, + adding '__initdata' will help save some additional bytes here. + + b) when there is only one possible pin configurations for a component, + some simplified definitions can be used, e.g. GPIOxx_TFT_LCD_16BPP on + PXA25x and PXA27x processors + + c) if by board design, a pin can be configured to wake up the system + from low power state, it can be 'OR'ed with any of: + + WAKEUP_ON_EDGE_BOTH + WAKEUP_ON_EDGE_RISE + WAKEUP_ON_EDGE_FALL + WAKEUP_ON_LEVEL_HIGH - specifically for enabling of keypad GPIOs, + + to indicate that this pin has the capability of wake-up the system, + and on which edge(s). This, however, doesn't necessarily mean the + pin _will_ wakeup the system, it will only when set_irq_wake() is + invoked with the corresponding GPIO IRQ (GPIO_IRQ(xx) or gpio_to_irq()) + and eventually calls gpio_set_wake() for the actual register setting. + + d) although PXA3xx MFP supports edge detection on each pin, the + internal logic will only wakeup the system when those specific bits + in ADxER registers are set, which can be well mapped to the + corresponding peripheral, thus set_irq_wake() can be called with + the peripheral IRQ to enable the wakeup. + + + MFP on PXA3xx +=============== + +Every external I/O pad on PXA3xx (excluding those for special purpose) has +one MFP logic associated, and is controlled by one MFP register (MFPR). + +The MFPR has the following bit definitions (for PXA300/PXA310/PXA320): + + 31 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 + +-------------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ + | RESERVED |PS|PU|PD| DRIVE |SS|SD|SO|EC|EF|ER|--| AF_SEL | + +-------------------------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ + + Bit 3: RESERVED + Bit 4: EDGE_RISE_EN - enable detection of rising edge on this pin + Bit 5: EDGE_FALL_EN - enable detection of falling edge on this pin + Bit 6: EDGE_CLEAR - disable edge detection on this pin + Bit 7: SLEEP_OE_N - enable outputs during low power modes + Bit 8: SLEEP_DATA - output data on the pin during low power modes + Bit 9: SLEEP_SEL - selection control for low power modes signals + Bit 13: PULLDOWN_EN - enable the internal pull-down resistor on this pin + Bit 14: PULLUP_EN - enable the internal pull-up resistor on this pin + Bit 15: PULL_SEL - pull state controlled by selected alternate function + (0) or by PULL{UP,DOWN}_EN bits (1) + + Bit 0 - 2: AF_SEL - alternate function selection, 8 possibilities, from 0-7 + Bit 10-12: DRIVE - drive strength and slew rate + 0b000 - fast 1mA + 0b001 - fast 2mA + 0b002 - fast 3mA + 0b003 - fast 4mA + 0b004 - slow 6mA + 0b005 - fast 6mA + 0b006 - slow 10mA + 0b007 - fast 10mA + + MFP Design for PXA2xx/PXA3xx +============================== + +Due to the difference of pin-mux handling between PXA2xx and PXA3xx, a unified +MFP API is introduced to cover both series of processors. + +The basic idea of this design is to introduce definitions for all possible pin +configurations, these definitions are processor and platform independent, and +the actual API invoked to convert these definitions into register settings and +make them effective there-after. + + Files Involved + -------------- + + - arch/arm/mach-pxa/include/mach/mfp.h + + for + 1. Unified pin definitions - enum constants for all configurable pins + 2. processor-neutral bit definitions for a possible MFP configuration + + - arch/arm/mach-pxa/mfp-pxa3xx.h + + for PXA3xx specific MFPR register bit definitions and PXA3xx common pin + configurations + + - arch/arm/mach-pxa/mfp-pxa2xx.h + + for PXA2xx specific definitions and PXA25x/PXA27x common pin configurations + + - arch/arm/mach-pxa/mfp-pxa25x.h + arch/arm/mach-pxa/mfp-pxa27x.h + arch/arm/mach-pxa/mfp-pxa300.h + arch/arm/mach-pxa/mfp-pxa320.h + arch/arm/mach-pxa/mfp-pxa930.h + + for processor specific definitions + + - arch/arm/mach-pxa/mfp-pxa3xx.c + - arch/arm/mach-pxa/mfp-pxa2xx.c + + for implementation of the pin configuration to take effect for the actual + processor. + + Pin Configuration + ----------------- + + The following comments are copied from mfp.h (see the actual source code + for most updated info) + + /* + * a possible MFP configuration is represented by a 32-bit integer + * + * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum) + * bit 10..12 - Alternate Function Selection + * bit 13..15 - Drive Strength + * bit 16..18 - Low Power Mode State + * bit 19..20 - Low Power Mode Edge Detection + * bit 21..22 - Run Mode Pull State + * + * to facilitate the definition, the following macros are provided + * + * MFP_CFG_DEFAULT - default MFP configuration value, with + * alternate function = 0, + * drive strength = fast 3mA (MFP_DS03X) + * low power mode = default + * edge detection = none + * + * MFP_CFG - default MFPR value with alternate function + * MFP_CFG_DRV - default MFPR value with alternate function and + * pin drive strength + * MFP_CFG_LPM - default MFPR value with alternate function and + * low power mode + * MFP_CFG_X - default MFPR value with alternate function, + * pin drive strength and low power mode + */ + + Examples of pin configurations are: + + #define GPIO94_SSP3_RXD MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT) + + which reads GPIO94 can be configured as SSP3_RXD, with alternate function + selection of 1, driving strength of 0b101, and a float state in low power + modes. + + NOTE: this is the default setting of this pin being configured as SSP3_RXD + which can be modified a bit in board code, though it is not recommended to + do so, simply because this default setting is usually carefully encoded, + and is supposed to work in most cases. + + Register Settings + ----------------- + + Register settings on PXA3xx for a pin configuration is actually very + straight-forward, most bits can be converted directly into MFPR value + in a easier way. Two sets of MFPR values are calculated: the run-time + ones and the low power mode ones, to allow different settings. + + The conversion from a generic pin configuration to the actual register + settings on PXA2xx is a bit complicated: many registers are involved, + including GAFRx, GPDRx, PGSRx, PWER, PKWR, PFER and PRER. Please see + mfp-pxa2xx.c for how the conversion is made. diff --git a/Documentation/arm/sti/overview.txt b/Documentation/arm/sti/overview.txt new file mode 100644 index 000000000..1a4e93d60 --- /dev/null +++ b/Documentation/arm/sti/overview.txt @@ -0,0 +1,33 @@ + STi ARM Linux Overview + ========================== + +Introduction +------------ + + The ST Microelectronics Multimedia and Application Processors range of + CortexA9 System-on-Chip are supported by the 'STi' platform of + ARM Linux. Currently STiH415, STiH416 SOCs are supported with both + B2000 and B2020 Reference boards. + + + configuration + ------------- + + A generic configuration is provided for both STiH415/416, and can be used as the + default by + make stih41x_defconfig + + Layout + ------ + All the files for multiple machine families (STiH415, STiH416, and STiG125) + are located in the platform code contained in arch/arm/mach-sti + + There is a generic board board-dt.c in the mach folder which support + Flattened Device Tree, which means, It works with any compatible board with + Device Trees. + + + Document Author + --------------- + + Srinivas Kandagatla <srinivas.kandagatla@st.com>, (c) 2013 ST Microelectronics diff --git a/Documentation/arm/sti/stih407-overview.txt b/Documentation/arm/sti/stih407-overview.txt new file mode 100644 index 000000000..3343f32f5 --- /dev/null +++ b/Documentation/arm/sti/stih407-overview.txt @@ -0,0 +1,18 @@ + STiH407 Overview + ================ + +Introduction +------------ + + The STiH407 is the new generation of SoC for Multi-HD, AVC set-top boxes + and server/connected client application for satellite, cable, terrestrial + and IP-STB markets. + + Features + - ARM Cortex-A9 1.5 GHz dual core CPU (28nm) + - SATA2, USB 3.0, PCIe, Gbit Ethernet + + Document Author + --------------- + + Maxime Coquelin <maxime.coquelin@st.com>, (c) 2014 ST Microelectronics diff --git a/Documentation/arm/sti/stih415-overview.txt b/Documentation/arm/sti/stih415-overview.txt new file mode 100644 index 000000000..1383e33f2 --- /dev/null +++ b/Documentation/arm/sti/stih415-overview.txt @@ -0,0 +1,12 @@ + STiH415 Overview + ================ + +Introduction +------------ + + The STiH415 is the next generation of HD, AVC set-top box processors + for satellite, cable, terrestrial and IP-STB markets. + + Features + - ARM Cortex-A9 1.0 GHz, dual-core CPU + - SATA2x2,USB 2.0x3, PCIe, Gbit Ethernet MACx2 diff --git a/Documentation/arm/sti/stih416-overview.txt b/Documentation/arm/sti/stih416-overview.txt new file mode 100644 index 000000000..558444c20 --- /dev/null +++ b/Documentation/arm/sti/stih416-overview.txt @@ -0,0 +1,12 @@ + STiH416 Overview + ================ + +Introduction +------------ + + The STiH416 is the next generation of HD, AVC set-top box processors + for satellite, cable, terrestrial and IP-STB markets. + + Features + - ARM Cortex-A9 1.2 GHz dual core CPU + - SATA2x2,USB 2.0x3, PCIe, Gbit Ethernet MACx2 diff --git a/Documentation/arm/sti/stih418-overview.txt b/Documentation/arm/sti/stih418-overview.txt new file mode 100644 index 000000000..1cd8fc806 --- /dev/null +++ b/Documentation/arm/sti/stih418-overview.txt @@ -0,0 +1,20 @@ + STiH418 Overview + ================ + +Introduction +------------ + + The STiH418 is the new generation of SoC for UHDp60 set-top boxes + and server/connected client application for satellite, cable, terrestrial + and IP-STB markets. + + Features + - ARM Cortex-A9 1.5 GHz quad core CPU (28nm) + - SATA2, USB 3.0, PCIe, Gbit Ethernet + - HEVC L5.1 Main 10 + - VP9 + + Document Author + --------------- + + Maxime Coquelin <maxime.coquelin@st.com>, (c) 2015 ST Microelectronics diff --git a/Documentation/arm/stm32/overview.rst b/Documentation/arm/stm32/overview.rst new file mode 100644 index 000000000..85cfc8410 --- /dev/null +++ b/Documentation/arm/stm32/overview.rst @@ -0,0 +1,34 @@ +======================== +STM32 ARM Linux Overview +======================== + +Introduction +------------ + +The STMicroelectronics STM32 family of Cortex-A microprocessors (MPUs) and +Cortex-M microcontrollers (MCUs) are supported by the 'STM32' platform of +ARM Linux. + +Configuration +------------- + +For MCUs, use the provided default configuration: + make stm32_defconfig +For MPUs, use multi_v7 configuration: + make multi_v7_defconfig + +Layout +------ + +All the files for multiple machine families are located in the platform code +contained in arch/arm/mach-stm32 + +There is a generic board board-dt.c in the mach folder which support +Flattened Device Tree, which means, it works with any compatible board with +Device Trees. + +:Authors: + +- Maxime Coquelin <mcoquelin.stm32@gmail.com> +- Ludovic Barre <ludovic.barre@st.com> +- Gerald Baeza <gerald.baeza@st.com> diff --git a/Documentation/arm/stm32/stm32f429-overview.rst b/Documentation/arm/stm32/stm32f429-overview.rst new file mode 100644 index 000000000..18feda97f --- /dev/null +++ b/Documentation/arm/stm32/stm32f429-overview.rst @@ -0,0 +1,26 @@ +STM32F429 Overview +================== + +Introduction +------------ + +The STM32F429 is a Cortex-M4 MCU aimed at various applications. +It features: + +- ARM Cortex-M4 up to 180MHz with FPU +- 2MB internal Flash Memory +- External memory support through FMC controller (PSRAM, SDRAM, NOR, NAND) +- I2C, SPI, SAI, CAN, USB OTG, Ethernet controllers +- LCD controller & Camera interface +- Cryptographic processor + +Resources +--------- + +Datasheet and reference manual are publicly available on ST website (STM32F429_). + +.. _STM32F429: http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806?ecmp=stm32f429-439_pron_pr-ces2014_nov2013 + +:Authors: + +Maxime Coquelin <mcoquelin.stm32@gmail.com> diff --git a/Documentation/arm/stm32/stm32f746-overview.rst b/Documentation/arm/stm32/stm32f746-overview.rst new file mode 100644 index 000000000..b5f4b6ce7 --- /dev/null +++ b/Documentation/arm/stm32/stm32f746-overview.rst @@ -0,0 +1,33 @@ +STM32F746 Overview +================== + +Introduction +------------ + +The STM32F746 is a Cortex-M7 MCU aimed at various applications. +It features: + +- Cortex-M7 core running up to @216MHz +- 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM) +- FMC controller to connect SDRAM, NOR and NAND memories +- Dual mode QSPI +- SD/MMC/SDIO support +- Ethernet controller +- USB OTFG FS & HS controllers +- I2C, SPI, CAN busses support +- Several 16 & 32 bits general purpose timers +- Serial Audio interface +- LCD controller +- HDMI-CEC +- SPDIFRX + +Resources +--------- + +Datasheet and reference manual are publicly available on ST website (STM32F746_). + +.. _STM32F746: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f7-series/stm32f7x6/stm32f746ng.html + +:Authors: + +Alexandre Torgue <alexandre.torgue@st.com> diff --git a/Documentation/arm/stm32/stm32f769-overview.rst b/Documentation/arm/stm32/stm32f769-overview.rst new file mode 100644 index 000000000..228656ced --- /dev/null +++ b/Documentation/arm/stm32/stm32f769-overview.rst @@ -0,0 +1,35 @@ +STM32F769 Overview +================== + +Introduction +------------ + +The STM32F769 is a Cortex-M7 MCU aimed at various applications. +It features: + +- Cortex-M7 core running up to @216MHz +- 2MB internal flash, 512KBytes internal RAM (+4KB of backup SRAM) +- FMC controller to connect SDRAM, NOR and NAND memories +- Dual mode QSPI +- SD/MMC/SDIO support*2 +- Ethernet controller +- USB OTFG FS & HS controllers +- I2C*4, SPI*6, CAN*3 busses support +- Several 16 & 32 bits general purpose timers +- Serial Audio interface*2 +- LCD controller +- HDMI-CEC +- DSI +- SPDIFRX +- MDIO salave interface + +Resources +--------- + +Datasheet and reference manual are publicly available on ST website (STM32F769_). + +.. _STM32F769: http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32-high-performance-mcus/stm32f7-series/stm32f7x9/stm32f769ni.html + +:Authors: + +Alexandre Torgue <alexandre.torgue@st.com> diff --git a/Documentation/arm/stm32/stm32h743-overview.rst b/Documentation/arm/stm32/stm32h743-overview.rst new file mode 100644 index 000000000..3458dc000 --- /dev/null +++ b/Documentation/arm/stm32/stm32h743-overview.rst @@ -0,0 +1,34 @@ +STM32H743 Overview +================== + +Introduction +------------ + +The STM32H743 is a Cortex-M7 MCU aimed at various applications. +It features: + +- Cortex-M7 core running up to @400MHz +- 2MB internal flash, 1MBytes internal RAM +- FMC controller to connect SDRAM, NOR and NAND memories +- Dual mode QSPI +- SD/MMC/SDIO support +- Ethernet controller +- USB OTFG FS & HS controllers +- I2C, SPI, CAN busses support +- Several 16 & 32 bits general purpose timers +- Serial Audio interface +- LCD controller +- HDMI-CEC +- SPDIFRX +- DFSDM + +Resources +--------- + +Datasheet and reference manual are publicly available on ST website (STM32H743_). + +.. _STM32H743: http://www.st.com/en/microcontrollers/stm32h7x3.html?querycriteria=productId=LN2033 + +:Authors: + +Alexandre Torgue <alexandre.torgue@st.com> diff --git a/Documentation/arm/stm32/stm32mp157-overview.rst b/Documentation/arm/stm32/stm32mp157-overview.rst new file mode 100644 index 000000000..62e176d47 --- /dev/null +++ b/Documentation/arm/stm32/stm32mp157-overview.rst @@ -0,0 +1,19 @@ +STM32MP157 Overview +=================== + +Introduction +------------ + +The STM32MP157 is a Cortex-A MPU aimed at various applications. +It features: + +- Dual core Cortex-A7 application core +- 2D/3D image composition with GPU +- Standard memories interface support +- Standard connectivity, widely inherited from the STM32 MCU family +- Comprehensive security support + +:Authors: + +- Ludovic Barre <ludovic.barre@st.com> +- Gerald Baeza <gerald.baeza@st.com> diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README new file mode 100644 index 000000000..f8efc2199 --- /dev/null +++ b/Documentation/arm/sunxi/README @@ -0,0 +1,102 @@ +ARM Allwinner SoCs +================== + +This document lists all the ARM Allwinner SoCs that are currently +supported in mainline by the Linux kernel. This document will also +provide links to documentation and/or datasheet for these SoCs. + +SunXi family +------------ + Linux kernel mach directory: arch/arm/mach-sunxi + + Flavors: + * ARM926 based SoCs + - Allwinner F20 (sun3i) + + Not Supported + + * ARM Cortex-A8 based SoCs + - Allwinner A10 (sun4i) + + Datasheet + http://dl.linux-sunxi.org/A10/A10%20Datasheet%20-%20v1.21%20%282012-04-06%29.pdf + + User Manual + http://dl.linux-sunxi.org/A10/A10%20User%20Manual%20-%20v1.20%20%282012-04-09%2c%20DECRYPTED%29.pdf + + - Allwinner A10s (sun5i) + + Datasheet + http://dl.linux-sunxi.org/A10s/A10s%20Datasheet%20-%20v1.20%20%282012-03-27%29.pdf + + - Allwinner A13 / R8 (sun5i) + + Datasheet + http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf + + User Manual + http://dl.linux-sunxi.org/A13/A13%20User%20Manual%20-%20v1.2%20%282013-01-08%29.pdf + + - Next Thing Co GR8 (sun5i) + + * Single ARM Cortex-A7 based SoCs + - Allwinner V3s (sun8i) + + Datasheet + http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf + + * Dual ARM Cortex-A7 based SoCs + - Allwinner A20 (sun7i) + + User Manual + http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf + + - Allwinner A23 (sun8i) + + Datasheet + http://dl.linux-sunxi.org/A23/A23%20Datasheet%20V1.0%2020130830.pdf + + User Manual + http://dl.linux-sunxi.org/A23/A23%20User%20Manual%20V1.0%2020130830.pdf + + * Quad ARM Cortex-A7 based SoCs + - Allwinner A31 (sun6i) + + Datasheet + http://dl.linux-sunxi.org/A31/A3x_release_document/A31/IC/A31%20datasheet%20V1.3%2020131106.pdf + + User Manual + http://dl.linux-sunxi.org/A31/A3x_release_document/A31/IC/A31%20user%20manual%20V1.1%2020130630.pdf + + - Allwinner A31s (sun6i) + + Datasheet + http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20datasheet%20V1.3%2020131106.pdf + + User Manual + http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20User%20Manual%20%20V1.0%2020130322.pdf + + - Allwinner A33 (sun8i) + + Datasheet + http://dl.linux-sunxi.org/A33/A33%20Datasheet%20release%201.1.pdf + + User Manual + http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf + + - Allwinner H2+ (sun8i) + + No document available now, but is known to be working properly with + H3 drivers and memory map. + + - Allwinner H3 (sun8i) + + Datasheet + http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf + + - Allwinner R40 (sun8i) + + Datasheet + https://github.com/tinalinux/docs/raw/r40-v1.y/R40_Datasheet_V1.0.pdf + + User Manual + https://github.com/tinalinux/docs/raw/r40-v1.y/Allwinner_R40_User_Manual_V1.0.pdf + + * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs + - Allwinner A80 + + Datasheet + http://dl.linux-sunxi.org/A80/A80_Datasheet_Revision_1.0_0404.pdf + + * Octa ARM Cortex-A7 based SoCs + - Allwinner A83T + + Datasheet + https://github.com/allwinner-zh/documents/raw/master/A83T/A83T_Datasheet_v1.3_20150510.pdf + + User Manual + https://github.com/allwinner-zh/documents/raw/master/A83T/A83T_User_Manual_v1.5.1_20150513.pdf + + * Quad ARM Cortex-A53 based SoCs + - Allwinner A64 + + Datasheet + http://dl.linux-sunxi.org/A64/A64_Datasheet_V1.1.pdf + + User Manual + http://dl.linux-sunxi.org/A64/Allwinner%20A64%20User%20Manual%20v1.0.pdf diff --git a/Documentation/arm/sunxi/clocks.txt b/Documentation/arm/sunxi/clocks.txt new file mode 100644 index 000000000..e09a88aa3 --- /dev/null +++ b/Documentation/arm/sunxi/clocks.txt @@ -0,0 +1,56 @@ +Frequently asked questions about the sunxi clock system +======================================================= + +This document contains useful bits of information that people tend to ask +about the sunxi clock system, as well as accompanying ASCII art when adequate. + +Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the + system? + +A: The 24MHz oscillator allows gating to save power. Indeed, if gated + carelessly the system would stop functioning, but with the right + steps, one can gate it and keep the system running. Consider this + simplified suspend example: + + While the system is operational, you would see something like + + 24MHz 32kHz + | + PLL1 + \ + \_ CPU Mux + | + [CPU] + + When you are about to suspend, you switch the CPU Mux to the 32kHz + oscillator: + + 24Mhz 32kHz + | | + PLL1 | + / + CPU Mux _/ + | + [CPU] + + Finally you can gate the main oscillator + + 32kHz + | + | + / + CPU Mux _/ + | + [CPU] + +Q: Were can I learn more about the sunxi clocks? + +A: The linux-sunxi wiki contains a page documenting the clock registers, + you can find it at + + http://linux-sunxi.org/A10/CCM + + The authoritative source for information at this time is the ccmu driver + released by Allwinner, you can find it at + + https://github.com/linux-sunxi/linux-sunxi/tree/sunxi-3.0/arch/arm/mach-sun4i/clock/ccmu diff --git a/Documentation/arm/swp_emulation b/Documentation/arm/swp_emulation new file mode 100644 index 000000000..af903d22f --- /dev/null +++ b/Documentation/arm/swp_emulation @@ -0,0 +1,27 @@ +Software emulation of deprecated SWP instruction (CONFIG_SWP_EMULATE) +--------------------------------------------------------------------- + +ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommeds +moving to the load-locked/store-conditional instructions LDREX and STREX. + +ARMv7 multiprocessing extensions introduce the ability to disable these +instructions, triggering an undefined instruction exception when executed. +Trapped instructions are emulated using an LDREX/STREX or LDREXB/STREXB +sequence. If a memory access fault (an abort) occurs, a segmentation fault is +signalled to the triggering process. + +/proc/cpu/swp_emulation holds some statistics/information, including the PID of +the last process to trigger the emulation to be invocated. For example: +--- +Emulated SWP: 12 +Emulated SWPB: 0 +Aborted SWP{B}: 1 +Last process: 314 +--- + +NOTE: when accessing uncached shared regions, LDREX/STREX rely on an external +transaction monitoring block called a global monitor to maintain update +atomicity. If your system does not implement a global monitor, this option can +cause programs that perform SWP operations to uncached memory to deadlock, as +the STREX operation will always fail. + diff --git a/Documentation/arm/tcm.txt b/Documentation/arm/tcm.txt new file mode 100644 index 000000000..7c15871c1 --- /dev/null +++ b/Documentation/arm/tcm.txt @@ -0,0 +1,155 @@ +ARM TCM (Tightly-Coupled Memory) handling in Linux +---- +Written by Linus Walleij <linus.walleij@stericsson.com> + +Some ARM SoC:s have a so-called TCM (Tightly-Coupled Memory). +This is usually just a few (4-64) KiB of RAM inside the ARM +processor. + +Due to being embedded inside the CPU The TCM has a +Harvard-architecture, so there is an ITCM (instruction TCM) +and a DTCM (data TCM). The DTCM can not contain any +instructions, but the ITCM can actually contain data. +The size of DTCM or ITCM is minimum 4KiB so the typical +minimum configuration is 4KiB ITCM and 4KiB DTCM. + +ARM CPU:s have special registers to read out status, physical +location and size of TCM memories. arch/arm/include/asm/cputype.h +defines a CPUID_TCM register that you can read out from the +system control coprocessor. Documentation from ARM can be found +at http://infocenter.arm.com, search for "TCM Status Register" +to see documents for all CPUs. Reading this register you can +determine if ITCM (bits 1-0) and/or DTCM (bit 17-16) is present +in the machine. + +There is further a TCM region register (search for "TCM Region +Registers" at the ARM site) that can report and modify the location +size of TCM memories at runtime. This is used to read out and modify +TCM location and size. Notice that this is not a MMU table: you +actually move the physical location of the TCM around. At the +place you put it, it will mask any underlying RAM from the +CPU so it is usually wise not to overlap any physical RAM with +the TCM. + +The TCM memory can then be remapped to another address again using +the MMU, but notice that the TCM if often used in situations where +the MMU is turned off. To avoid confusion the current Linux +implementation will map the TCM 1 to 1 from physical to virtual +memory in the location specified by the kernel. Currently Linux +will map ITCM to 0xfffe0000 and on, and DTCM to 0xfffe8000 and +on, supporting a maximum of 32KiB of ITCM and 32KiB of DTCM. + +Newer versions of the region registers also support dividing these +TCMs in two separate banks, so for example an 8KiB ITCM is divided +into two 4KiB banks with its own control registers. The idea is to +be able to lock and hide one of the banks for use by the secure +world (TrustZone). + +TCM is used for a few things: + +- FIQ and other interrupt handlers that need deterministic + timing and cannot wait for cache misses. + +- Idle loops where all external RAM is set to self-refresh + retention mode, so only on-chip RAM is accessible by + the CPU and then we hang inside ITCM waiting for an + interrupt. + +- Other operations which implies shutting off or reconfiguring + the external RAM controller. + +There is an interface for using TCM on the ARM architecture +in <asm/tcm.h>. Using this interface it is possible to: + +- Define the physical address and size of ITCM and DTCM. + +- Tag functions to be compiled into ITCM. + +- Tag data and constants to be allocated to DTCM and ITCM. + +- Have the remaining TCM RAM added to a special + allocation pool with gen_pool_create() and gen_pool_add() + and provice tcm_alloc() and tcm_free() for this + memory. Such a heap is great for things like saving + device state when shutting off device power domains. + +A machine that has TCM memory shall select HAVE_TCM from +arch/arm/Kconfig for itself. Code that needs to use TCM shall +#include <asm/tcm.h> + +Functions to go into itcm can be tagged like this: +int __tcmfunc foo(int bar); + +Since these are marked to become long_calls and you may want +to have functions called locally inside the TCM without +wasting space, there is also the __tcmlocalfunc prefix that +will make the call relative. + +Variables to go into dtcm can be tagged like this: +int __tcmdata foo; + +Constants can be tagged like this: +int __tcmconst foo; + +To put assembler into TCM just use +.section ".tcm.text" or .section ".tcm.data" +respectively. + +Example code: + +#include <asm/tcm.h> + +/* Uninitialized data */ +static u32 __tcmdata tcmvar; +/* Initialized data */ +static u32 __tcmdata tcmassigned = 0x2BADBABEU; +/* Constant */ +static const u32 __tcmconst tcmconst = 0xCAFEBABEU; + +static void __tcmlocalfunc tcm_to_tcm(void) +{ + int i; + for (i = 0; i < 100; i++) + tcmvar ++; +} + +static void __tcmfunc hello_tcm(void) +{ + /* Some abstract code that runs in ITCM */ + int i; + for (i = 0; i < 100; i++) { + tcmvar ++; + } + tcm_to_tcm(); +} + +static void __init test_tcm(void) +{ + u32 *tcmem; + int i; + + hello_tcm(); + printk("Hello TCM executed from ITCM RAM\n"); + + printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar); + tcmvar = 0xDEADBEEFU; + printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar); + + printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned); + + printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst); + + /* Allocate some TCM memory from the pool */ + tcmem = tcm_alloc(20); + if (tcmem) { + printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem); + tcmem[0] = 0xDEADBEEFU; + tcmem[1] = 0x2BADBABEU; + tcmem[2] = 0xCAFEBABEU; + tcmem[3] = 0xDEADBEEFU; + tcmem[4] = 0x2BADBABEU; + for (i = 0; i < 5; i++) + printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]); + tcm_free(tcmem, 20); + } +} diff --git a/Documentation/arm/uefi.txt b/Documentation/arm/uefi.txt new file mode 100644 index 000000000..6543a0ade --- /dev/null +++ b/Documentation/arm/uefi.txt @@ -0,0 +1,60 @@ +UEFI, the Unified Extensible Firmware Interface, is a specification +governing the behaviours of compatible firmware interfaces. It is +maintained by the UEFI Forum - http://www.uefi.org/. + +UEFI is an evolution of its predecessor 'EFI', so the terms EFI and +UEFI are used somewhat interchangeably in this document and associated +source code. As a rule, anything new uses 'UEFI', whereas 'EFI' refers +to legacy code or specifications. + +UEFI support in Linux +===================== +Booting on a platform with firmware compliant with the UEFI specification +makes it possible for the kernel to support additional features: +- UEFI Runtime Services +- Retrieving various configuration information through the standardised + interface of UEFI configuration tables. (ACPI, SMBIOS, ...) + +For actually enabling [U]EFI support, enable: +- CONFIG_EFI=y +- CONFIG_EFI_VARS=y or m + +The implementation depends on receiving information about the UEFI environment +in a Flattened Device Tree (FDT) - so is only available with CONFIG_OF. + +UEFI stub +========= +The "stub" is a feature that extends the Image/zImage into a valid UEFI +PE/COFF executable, including a loader application that makes it possible to +load the kernel directly from the UEFI shell, boot menu, or one of the +lightweight bootloaders like Gummiboot or rEFInd. + +The kernel image built with stub support remains a valid kernel image for +booting in non-UEFI environments. + +UEFI kernel support on ARM +========================== +UEFI kernel support on the ARM architectures (arm and arm64) is only available +when boot is performed through the stub. + +When booting in UEFI mode, the stub deletes any memory nodes from a provided DT. +Instead, the kernel reads the UEFI memory map. + +The stub populates the FDT /chosen node with (and the kernel scans for) the +following parameters: +________________________________________________________________________________ +Name | Size | Description +================================================================================ +linux,uefi-system-table | 64-bit | Physical address of the UEFI System Table. +-------------------------------------------------------------------------------- +linux,uefi-mmap-start | 64-bit | Physical address of the UEFI memory map, + | | populated by the UEFI GetMemoryMap() call. +-------------------------------------------------------------------------------- +linux,uefi-mmap-size | 32-bit | Size in bytes of the UEFI memory map + | | pointed to in previous entry. +-------------------------------------------------------------------------------- +linux,uefi-mmap-desc-size | 32-bit | Size in bytes of each entry in the UEFI + | | memory map. +-------------------------------------------------------------------------------- +linux,uefi-mmap-desc-ver | 32-bit | Version of the mmap descriptor format. +-------------------------------------------------------------------------------- diff --git a/Documentation/arm/vlocks.txt b/Documentation/arm/vlocks.txt new file mode 100644 index 000000000..45731672c --- /dev/null +++ b/Documentation/arm/vlocks.txt @@ -0,0 +1,211 @@ +vlocks for Bare-Metal Mutual Exclusion +====================================== + +Voting Locks, or "vlocks" provide a simple low-level mutual exclusion +mechanism, with reasonable but minimal requirements on the memory +system. + +These are intended to be used to coordinate critical activity among CPUs +which are otherwise non-coherent, in situations where the hardware +provides no other mechanism to support this and ordinary spinlocks +cannot be used. + + +vlocks make use of the atomicity provided by the memory system for +writes to a single memory location. To arbitrate, every CPU "votes for +itself", by storing a unique number to a common memory location. The +final value seen in that memory location when all the votes have been +cast identifies the winner. + +In order to make sure that the election produces an unambiguous result +in finite time, a CPU will only enter the election in the first place if +no winner has been chosen and the election does not appear to have +started yet. + + +Algorithm +--------- + +The easiest way to explain the vlocks algorithm is with some pseudo-code: + + + int currently_voting[NR_CPUS] = { 0, }; + int last_vote = -1; /* no votes yet */ + + bool vlock_trylock(int this_cpu) + { + /* signal our desire to vote */ + currently_voting[this_cpu] = 1; + if (last_vote != -1) { + /* someone already volunteered himself */ + currently_voting[this_cpu] = 0; + return false; /* not ourself */ + } + + /* let's suggest ourself */ + last_vote = this_cpu; + currently_voting[this_cpu] = 0; + + /* then wait until everyone else is done voting */ + for_each_cpu(i) { + while (currently_voting[i] != 0) + /* wait */; + } + + /* result */ + if (last_vote == this_cpu) + return true; /* we won */ + return false; + } + + bool vlock_unlock(void) + { + last_vote = -1; + } + + +The currently_voting[] array provides a way for the CPUs to determine +whether an election is in progress, and plays a role analogous to the +"entering" array in Lamport's bakery algorithm [1]. + +However, once the election has started, the underlying memory system +atomicity is used to pick the winner. This avoids the need for a static +priority rule to act as a tie-breaker, or any counters which could +overflow. + +As long as the last_vote variable is globally visible to all CPUs, it +will contain only one value that won't change once every CPU has cleared +its currently_voting flag. + + +Features and limitations +------------------------ + + * vlocks are not intended to be fair. In the contended case, it is the + _last_ CPU which attempts to get the lock which will be most likely + to win. + + vlocks are therefore best suited to situations where it is necessary + to pick a unique winner, but it does not matter which CPU actually + wins. + + * Like other similar mechanisms, vlocks will not scale well to a large + number of CPUs. + + vlocks can be cascaded in a voting hierarchy to permit better scaling + if necessary, as in the following hypothetical example for 4096 CPUs: + + /* first level: local election */ + my_town = towns[(this_cpu >> 4) & 0xf]; + I_won = vlock_trylock(my_town, this_cpu & 0xf); + if (I_won) { + /* we won the town election, let's go for the state */ + my_state = states[(this_cpu >> 8) & 0xf]; + I_won = vlock_lock(my_state, this_cpu & 0xf)); + if (I_won) { + /* and so on */ + I_won = vlock_lock(the_whole_country, this_cpu & 0xf]; + if (I_won) { + /* ... */ + } + vlock_unlock(the_whole_country); + } + vlock_unlock(my_state); + } + vlock_unlock(my_town); + + +ARM implementation +------------------ + +The current ARM implementation [2] contains some optimisations beyond +the basic algorithm: + + * By packing the members of the currently_voting array close together, + we can read the whole array in one transaction (providing the number + of CPUs potentially contending the lock is small enough). This + reduces the number of round-trips required to external memory. + + In the ARM implementation, this means that we can use a single load + and comparison: + + LDR Rt, [Rn] + CMP Rt, #0 + + ...in place of code equivalent to: + + LDRB Rt, [Rn] + CMP Rt, #0 + LDRBEQ Rt, [Rn, #1] + CMPEQ Rt, #0 + LDRBEQ Rt, [Rn, #2] + CMPEQ Rt, #0 + LDRBEQ Rt, [Rn, #3] + CMPEQ Rt, #0 + + This cuts down on the fast-path latency, as well as potentially + reducing bus contention in contended cases. + + The optimisation relies on the fact that the ARM memory system + guarantees coherency between overlapping memory accesses of + different sizes, similarly to many other architectures. Note that + we do not care which element of currently_voting appears in which + bits of Rt, so there is no need to worry about endianness in this + optimisation. + + If there are too many CPUs to read the currently_voting array in + one transaction then multiple transations are still required. The + implementation uses a simple loop of word-sized loads for this + case. The number of transactions is still fewer than would be + required if bytes were loaded individually. + + + In principle, we could aggregate further by using LDRD or LDM, but + to keep the code simple this was not attempted in the initial + implementation. + + + * vlocks are currently only used to coordinate between CPUs which are + unable to enable their caches yet. This means that the + implementation removes many of the barriers which would be required + when executing the algorithm in cached memory. + + packing of the currently_voting array does not work with cached + memory unless all CPUs contending the lock are cache-coherent, due + to cache writebacks from one CPU clobbering values written by other + CPUs. (Though if all the CPUs are cache-coherent, you should be + probably be using proper spinlocks instead anyway). + + + * The "no votes yet" value used for the last_vote variable is 0 (not + -1 as in the pseudocode). This allows statically-allocated vlocks + to be implicitly initialised to an unlocked state simply by putting + them in .bss. + + An offset is added to each CPU's ID for the purpose of setting this + variable, so that no CPU uses the value 0 for its ID. + + +Colophon +-------- + +Originally created and documented by Dave Martin for Linaro Limited, for +use in ARM-based big.LITTLE platforms, with review and input gratefully +received from Nicolas Pitre and Achin Gupta. Thanks to Nicolas for +grabbing most of this text out of the relevant mail thread and writing +up the pseudocode. + +Copyright (C) 2012-2013 Linaro Limited +Distributed under the terms of Version 2 of the GNU General Public +License, as defined in linux/COPYING. + + +References +---------- + +[1] Lamport, L. "A New Solution of Dijkstra's Concurrent Programming + Problem", Communications of the ACM 17, 8 (August 1974), 453-455. + + https://en.wikipedia.org/wiki/Lamport%27s_bakery_algorithm + +[2] linux/arch/arm/common/vlock.S, www.kernel.org. |