Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 219 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt
new file mode 100644
index 000000000..401831973
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt
@@ -0,0 +1,219 @@
+System Control and Power Interface (SCPI) Message Protocol
+----------------------------------------------------------
+
+Firmware implementing the SCPI described in ARM document number ARM DUI 0922B
+("ARM Compute Subsystem SCP: Message Interface Protocols")[0] can be used
+by Linux to initiate various system control and power operations.
+
+Required properties:
+
+- compatible : should be
+	* "arm,scpi" : For implementations complying to SCPI v1.0 or above
+	* "arm,scpi-pre-1.0" : For implementations complying to all
+		unversioned releases prior to SCPI v1.0
+- mboxes: List of phandle and mailbox channel specifiers
+	  All the channels reserved by remote SCP firmware for use by
+	  SCPI message protocol should be specified in any order
+- shmem : List of phandle pointing to the shared memory(SHM) area between the
+	  processors using these mailboxes for IPC, one for each mailbox
+	  SHM can be any memory reserved for the purpose of this communication
+	  between the processors.
+
+See Documentation/devicetree/bindings/mailbox/mailbox.txt
+for more details about the generic mailbox controller and
+client driver bindings.
+
+Clock bindings for the clocks based on SCPI Message Protocol
+------------------------------------------------------------
+
+This binding uses the common clock binding[1].
+
+Container Node
+==============
+Required properties:
+- compatible : should be "arm,scpi-clocks"
+	       All the clocks provided by SCP firmware via SCPI message
+	       protocol much be listed as sub-nodes under this node.
+
+Sub-nodes
+=========
+Required properties:
+- compatible : shall include one of the following
+	"arm,scpi-dvfs-clocks" - all the clocks that are variable and index based.
+		These clocks don't provide an entire range of values between the
+		limits but only discrete points within the range. The firmware
+		provides the mapping for each such operating frequency and the
+		index associated with it. The firmware also manages the
+		voltage scaling appropriately with the clock scaling.
+	"arm,scpi-variable-clocks" - all the clocks that are variable and provide full
+		range within the specified range. The firmware provides the
+		range of values within a specified range.
+
+Other required properties for all clocks(all from common clock binding):
+- #clock-cells : Should be 1. Contains the Clock ID value used by SCPI commands.
+- clock-output-names : shall be the corresponding names of the outputs.
+- clock-indices: The identifying number for the clocks(i.e.clock_id) in the
+	node. It can be non linear and hence provide the mapping of identifiers
+	into the clock-output-names array.
+
+SRAM and Shared Memory for SCPI
+-------------------------------
+
+A small area of SRAM is reserved for SCPI communication between application
+processors and SCP.
+
+The properties should follow the generic mmio-sram description found in [3]
+
+Each sub-node represents the reserved area for SCPI.
+
+Required sub-node properties:
+- reg : The base offset and size of the reserved area with the SRAM
+- compatible : should be "arm,scp-shmem" for Non-secure SRAM based
+	       shared memory
+
+Sensor bindings for the sensors based on SCPI Message Protocol
+--------------------------------------------------------------
+SCPI provides an API to access the various sensors on the SoC.
+
+Required properties:
+- compatible : should be "arm,scpi-sensors".
+- #thermal-sensor-cells: should be set to 1. This property follows the
+			 thermal device tree bindings[2].
+
+			 Valid cell values are raw identifiers (Sensor ID)
+			 as used by the firmware. Refer to  platform details
+			 for your implementation for the IDs to use.
+
+Power domain bindings for the power domains based on SCPI Message Protocol
+------------------------------------------------------------
+
+This binding uses the generic power domain binding[4].
+
+PM domain providers
+===================
+
+Required properties:
+ - #power-domain-cells : Should be 1. Contains the device or the power
+			 domain ID value used by SCPI commands.
+ - num-domains: Total number of power domains provided by SCPI. This is
+		needed as the SCPI message protocol lacks a mechanism to
+		query this information at runtime.
+
+PM domain consumers
+===================
+
+Required properties:
+ - power-domains : A phandle and PM domain specifier as defined by bindings of
+                   the power controller specified by phandle.
+
+[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/thermal/thermal.txt
+[3] Documentation/devicetree/bindings/sram/sram.txt
+[4] Documentation/devicetree/bindings/power/power_domain.txt
+
+Example:
+
+sram: sram@50000000 {
+	compatible = "arm,juno-sram-ns", "mmio-sram";
+	reg = <0x0 0x50000000 0x0 0x10000>;
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0 0x0 0x50000000 0x10000>;
+
+	cpu_scp_lpri: scp-shmem@0 {
+		compatible = "arm,juno-scp-shmem";
+		reg = <0x0 0x200>;
+	};
+
+	cpu_scp_hpri: scp-shmem@200 {
+		compatible = "arm,juno-scp-shmem";
+		reg = <0x200 0x200>;
+	};
+};
+
+mailbox: mailbox0@40000000 {
+	....
+	#mbox-cells = <1>;
+};
+
+scpi_protocol: scpi@2e000000 {
+	compatible = "arm,scpi";
+	mboxes = <&mailbox 0 &mailbox 1>;
+	shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+	clocks {
+		compatible = "arm,scpi-clocks";
+
+		scpi_dvfs: scpi_clocks@0 {
+			compatible = "arm,scpi-dvfs-clocks";
+			#clock-cells = <1>;
+			clock-indices = <0>, <1>, <2>;
+			clock-output-names = "atlclk", "aplclk","gpuclk";
+		};
+		scpi_clk: scpi_clocks@3 {
+			compatible = "arm,scpi-variable-clocks";
+			#clock-cells = <1>;
+			clock-indices = <3>, <4>;
+			clock-output-names = "pxlclk0", "pxlclk1";
+		};
+	};
+
+	scpi_sensors0: sensors {
+		compatible = "arm,scpi-sensors";
+		#thermal-sensor-cells = <1>;
+	};
+
+	scpi_devpd: scpi-power-domains {
+		compatible = "arm,scpi-power-domains";
+		num-domains = <2>;
+		#power-domain-cells = <1>;
+	};
+};
+
+cpu@0 {
+	...
+	reg = <0 0>;
+	clocks = <&scpi_dvfs 0>;
+};
+
+hdlcd@7ff60000 {
+	...
+	reg = <0 0x7ff60000 0 0x1000>;
+	clocks = <&scpi_clk 4>;
+	power-domains = <&scpi_devpd 1>;
+};
+
+thermal-zones {
+	soc_thermal {
+		polling-delay-passive = <100>;
+		polling-delay = <1000>;
+
+				/* sensor         ID */
+		thermal-sensors = <&scpi_sensors0 3>;
+		...
+	};
+};
+
+In the above example, the #clock-cells is set to 1 as required.
+scpi_dvfs has 3 output clocks namely: atlclk, aplclk, and gpuclk with 0,
+1 and 2 as clock-indices. scpi_clk has 2 output clocks namely: pxlclk0
+and pxlclk1 with 3 and 4 as clock-indices.
+
+The first consumer in the example is cpu@0 and it has '0' as the clock
+specifier which points to the first entry in the output clocks of
+scpi_dvfs i.e. "atlclk".
+
+Similarly the second example is hdlcd@7ff60000 and it has pxlclk1 as input
+clock. '4' in the clock specifier here points to the second entry
+in the output clocks of scpi_clocks  i.e. "pxlclk1"
+
+The thermal-sensors property in the soc_thermal node uses the
+temperature sensor provided by SCP firmware to setup a thermal
+zone. The ID "3" is the sensor identifier for the temperature sensor
+as used by the firmware.
+
+The num-domains property in scpi-power-domains domain specifies that
+SCPI provides 2 power domains. The hdlcd node uses the power domain with
+domain ID 1.