Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 44 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
new file mode 100644
index 000000000..12ab2f723
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt
@@ -0,0 +1,44 @@
+Tegra SoC SATA AHCI controller
+
+Required properties :
+- compatible : Must be one of:
+  - Tegra124 : "nvidia,tegra124-ahci"
+  - Tegra132 : "nvidia,tegra132-ahci", "nvidia,tegra124-ahci"
+  - Tegra210 : "nvidia,tegra210-ahci"
+- reg : Should contain 2 entries:
+  - AHCI register set (SATA BAR5)
+  - SATA register set
+- interrupts : Defines the interrupt used by SATA
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+  - sata
+  - sata-oob
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - sata
+  - sata-oob
+  - sata-cold
+- phys : Must contain an entry for each entry in phy-names.
+  See ../phy/phy-bindings.txt for details.
+- phy-names : Must include the following entries:
+  - For Tegra124 and Tegra132:
+    - sata-phy : XUSB PADCTL SATA PHY
+- For Tegra124 and Tegra132:
+  - hvdd-supply : Defines the SATA HVDD regulator
+  - vddio-supply : Defines the SATA VDDIO regulator
+  - avdd-supply : Defines the SATA AVDD regulator
+  - target-5v-supply : Defines the SATA 5V power regulator
+  - target-12v-supply : Defines the SATA 12V power regulator
+
+Optional properties:
+- reg :
+  - AUX register set
+- clock-names :
+  - cml1 :
+    cml1 clock should be defined here if the PHY driver
+    doesn't manage them. If it does, they should not be.
+- phy-names :
+  - For T210:
+    - sata-phy