Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 64 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
new file mode 100644
index 000000000..0ffe65a31
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
@@ -0,0 +1,64 @@
+
+* Marvell MV64XXX I2C controller
+
+Required properties :
+
+ - reg             : Offset and length of the register set for the device
+ - compatible      : Should be either:
+                     - "allwinner,sun4i-a10-i2c"
+                     - "allwinner,sun6i-a31-i2c"
+                     - "marvell,mv64xxx-i2c"
+                     - "marvell,mv78230-i2c"
+                     - "marvell,mv78230-a0-i2c"
+                       * Note: Only use "marvell,mv78230-a0-i2c" for a
+                         very rare, initial version of the SoC which
+                         had broken offload support.  Linux
+                         auto-detects this and sets it appropriately.
+ - interrupts      : The interrupt number
+
+Optional properties :
+
+ - clock-frequency : Desired I2C bus clock frequency in Hz. If not set the
+default frequency is 100kHz
+
+ - resets          : phandle to the parent reset controller. Mandatory
+                     whenever you're using the "allwinner,sun6i-a31-i2c"
+                     compatible.
+
+ - clocks:	   : pointers to the reference clocks for this device, the
+		     first one is the one used for the clock on the i2c bus,
+		     the second one is the clock used to acces the registers
+		     of the controller
+
+ - clock-names	   : names of used clocks, mandatory if the second clock is
+		     used, the name must be "core", and "reg" (the latter is
+		     only for Armada 7K/8K).
+
+Examples:
+
+	i2c@11000 {
+		compatible = "marvell,mv64xxx-i2c";
+		reg = <0x11000 0x20>;
+		interrupts = <29>;
+		clock-frequency = <100000>;
+	};
+
+For the Armada XP:
+
+	i2c@11000 {
+		compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+		reg = <0x11000 0x100>;
+		interrupts = <29>;
+		clock-frequency = <100000>;
+	};
+
+For the Armada 7040:
+
+	i2c@701000 {
+		compatible = "marvell,mv78230-i2c";
+		reg = <0x701000 0x20>;
+		interrupts = <29>;
+		clock-frequency = <100000>;
+		clock-names = "core", "reg";
+		clocks = <&core_clock>, <&reg_clock>;
+	};