Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 123 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/iio/health/afe4403.txt b/Documentation/devicetree/bindings/iio/health/afe4403.txt
new file mode 100644
index 000000000..8e412054d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/afe4403.txt
@@ -0,0 +1,33 @@
+Texas Instruments AFE4403 Heart rate and Pulse Oximeter
+
+Required properties:
+ - compatible		: Should be "ti,afe4403".
+ - reg			: SPI chip select address of device.
+ - tx-supply		: Regulator supply to transmitting LEDs.
+ - interrupts		: The interrupt line the device ADC_RDY pin is
+			  connected to. For details refer to,
+			  ../../interrupt-controller/interrupts.txt.
+
+Optional properties:
+ - reset-gpios		: GPIO used to reset the device.
+			  For details refer to, ../../gpio/gpio.txt.
+
+For other required and optional properties of SPI slave nodes
+please refer to ../../spi/spi-bus.txt.
+
+Example:
+
+&spi0 {
+	heart_mon@0 {
+		compatible = "ti,afe4403";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		tx-supply = <&vbat>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+
+		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/iio/health/afe4404.txt b/Documentation/devicetree/bindings/iio/health/afe4404.txt
new file mode 100644
index 000000000..0b52830a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/afe4404.txt
@@ -0,0 +1,29 @@
+Texas Instruments AFE4404 Heart rate and Pulse Oximeter
+
+Required properties:
+ - compatible		: Should be "ti,afe4404".
+ - reg			: I2C address of the device.
+ - tx-supply		: Regulator supply to transmitting LEDs.
+ - interrupts		: The interrupt line the device ADC_RDY pin is
+			  connected to. For details refer to,
+			  ../interrupt-controller/interrupts.txt.
+
+Optional properties:
+ - reset-gpios		: GPIO used to reset the device.
+			  For details refer to, ../gpio/gpio.txt.
+
+Example:
+
+&i2c2 {
+	heart_mon@58 {
+		compatible = "ti,afe4404";
+		reg = <0x58>;
+
+		tx-supply = <&vbat>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+
+		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/iio/health/max30100.txt b/Documentation/devicetree/bindings/iio/health/max30100.txt
new file mode 100644
index 000000000..0054908a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/max30100.txt
@@ -0,0 +1,28 @@
+Maxim MAX30100 heart rate and pulse oximeter sensor
+
+* https://datasheets.maximintegrated.com/en/ds/MAX30100.pdf
+
+Required properties:
+  - compatible: must be "maxim,max30100"
+  - reg: the I2C address of the sensor
+  - interrupts: the sole interrupt generated by the device
+
+  Refer to interrupt-controller/interrupts.txt for generic
+  interrupt client node bindings.
+
+Optional properties:
+  - maxim,led-current-microamp: configuration for LED current in microamperes
+    while the engine is running. First indexed value is the configuration for
+    the RED LED, and second value is for the IR LED.
+
+    Refer to the datasheet for the allowed current values.
+
+Example:
+
+max30100@57 {
+	compatible = "maxim,max30100";
+	reg = <0x57>;
+	maxim,led-current-microamp = <24000 50000>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <16 2>;
+};
diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt
new file mode 100644
index 000000000..7ef7ae40a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/health/max30102.txt
@@ -0,0 +1,33 @@
+Maxim MAX30102 heart rate and pulse oximeter sensor
+Maxim MAX30105 optical particle-sensing module
+
+* https://datasheets.maximintegrated.com/en/ds/MAX30102.pdf
+* https://datasheets.maximintegrated.com/en/ds/MAX30105.pdf
+
+Required properties:
+  - compatible: must be "maxim,max30102" or "maxim,max30105"
+  - reg: the I2C address of the sensor
+  - interrupts: the sole interrupt generated by the device
+
+  Refer to interrupt-controller/interrupts.txt for generic
+  interrupt client node bindings.
+
+Optional properties:
+  - maxim,red-led-current-microamp: configuration for red LED current
+  - maxim,ir-led-current-microamp: configuration for IR LED current
+  - maxim,green-led-current-microamp: configuration for green LED current
+    (max30105 only)
+
+    Note that each step is approximately 200 microamps, ranging from 0 uA to
+    50800 uA.
+
+Example:
+
+max30102@57 {
+	compatible = "maxim,max30102";
+	reg = <0x57>;
+	maxim,red-led-current-microamp = <7000>;
+	maxim,ir-led-current-microamp = <7000>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <16 2>;
+};