Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 49 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/leds/tca6507.txt b/Documentation/devicetree/bindings/leds/tca6507.txt
new file mode 100644
index 000000000..bad910279
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/tca6507.txt
@@ -0,0 +1,49 @@
+LEDs connected to tca6507
+
+Required properties:
+- compatible : should be : "ti,tca6507".
+- #address-cells: must be 1
+- #size-cells: must be 0
+- reg: typically 0x45.
+
+Optional properties:
+- gpio-controller: allows lines to be used as output-only GPIOs.
+- #gpio-cells: if present, must not be 0.
+
+Each led is represented as a sub-node of the ti,tca6507 device.
+
+LED sub-node properties:
+- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
+- reg : number of LED line (could be from 0 to 6)
+- linux,default-trigger : (optional)
+   see Documentation/devicetree/bindings/leds/common.txt
+- compatible: either "led" (the default) or "gpio".
+
+Examples:
+
+tca6507@45 {
+	compatible = "ti,tca6507";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x45>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	led0: red-aux@0 {
+		label = "red:aux";
+		reg = <0x0>;
+	};
+
+	led1: green-aux@1 {
+		label = "green:aux";
+		reg = <0x5>;
+		linux,default-trigger = "default-on";
+	};
+
+	wifi-reset@6 {
+		reg = <0x6>;
+		compatible = "gpio";
+	};
+};
+