diff options
| author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 01:02:30 +0000 |
|---|---|---|
| committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 01:02:30 +0000 |
| commit | 76cb841cb886eef6b3bee341a2266c76578724ad (patch) | |
| tree | f5892e5ba6cc11949952a6ce4ecbe6d516d6ce58 /Documentation/devicetree/bindings/leds | |
| parent | Initial commit. (diff) | |
| download | linux-76cb841cb886eef6b3bee341a2266c76578724ad.tar.xz linux-76cb841cb886eef6b3bee341a2266c76578724ad.zip | |
Adding upstream version 4.19.249.upstream/4.19.249upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/leds')
42 files changed, 2570 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/leds/ams,as3645a.txt b/Documentation/devicetree/bindings/leds/ams,as3645a.txt new file mode 100644 index 000000000..fdc40e354 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/ams,as3645a.txt @@ -0,0 +1,79 @@ +Analog devices AS3645A device tree bindings + +The AS3645A flash LED controller can drive two LEDs, one high current +flash LED and one indicator LED. The high current flash LED can be +used in torch mode as well. + +Ranges below noted as [a, b] are closed ranges between a and b, i.e. a +and b are included in the range. + +Please also see common.txt in the same directory. + + +Required properties +=================== + +compatible : Must be "ams,as3645a". +reg : The I2C address of the device. Typically 0x30. +#address-cells : 1 +#size-cells : 0 + + +Required properties of the flash child node (0) +=============================================== + +reg: 0 +flash-timeout-us: Flash timeout in microseconds. The value must be in + the range [100000, 850000] and divisible by 50000. +flash-max-microamp: Maximum flash current in microamperes. Has to be + in the range between [200000, 500000] and + divisible by 20000. +led-max-microamp: Maximum torch (assist) current in microamperes. The + value must be in the range between [20000, 160000] and + divisible by 20000. +ams,input-max-microamp: Maximum flash controller input current. The + value must be in the range [1250000, 2000000] + and divisible by 50000. + + +Optional properties of the flash child node +=========================================== + +label : The label of the flash LED. + + +Required properties of the indicator child node (1) +=================================================== + +reg: 1 +led-max-microamp: Maximum indicator current. The allowed values are + 2500, 5000, 7500 and 10000. + +Optional properties of the indicator child node +=============================================== + +label : The label of the indicator LED. + + +Example +======= + + as3645a@30 { + #address-cells: 1 + #size-cells: 0 + reg = <0x30>; + compatible = "ams,as3645a"; + flash@0 { + reg = <0x0>; + flash-timeout-us = <150000>; + flash-max-microamp = <320000>; + led-max-microamp = <60000>; + ams,input-max-microamp = <1750000>; + label = "as3645a:flash"; + }; + indicator@1 { + reg = <0x1>; + led-max-microamp = <10000>; + label = "as3645a:indicator"; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/88pm860x.txt b/Documentation/devicetree/bindings/leds/backlight/88pm860x.txt new file mode 100644 index 000000000..261df2799 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/88pm860x.txt @@ -0,0 +1,15 @@ +88pm860x-backlight bindings + +Optional properties: + - marvell,88pm860x-iset: Current supplies on backlight device. + - marvell,88pm860x-pwm: PWM frequency on backlight device. + +Example: + + backlights { + backlight-0 { + marvell,88pm860x-iset = <4>; + marvell,88pm860x-pwm = <3>; + }; + backlight-2 { + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt new file mode 100644 index 000000000..230abdefd --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt @@ -0,0 +1,33 @@ +Binding for ArcticSand arc2c0608 LED driver + +Required properties: +- compatible: should be "arc,arc2c0608" +- reg: slave address + +Optional properties: +- default-brightness: brightness value on boot, value from: 0-4095 +- label: The name of the backlight device + See Documentation/devicetree/bindings/leds/common.txt +- led-sources: List of enabled channels from 0 to 5. + See Documentation/devicetree/bindings/leds/common.txt + +- arc,led-config-0: setting for register ILED_CONFIG_0 +- arc,led-config-1: setting for register ILED_CONFIG_1 +- arc,dim-freq: PWM mode frequence setting (bits [3:0] used) +- arc,comp-config: setting for register CONFIG_COMP +- arc,filter-config: setting for register FILTER_CONFIG +- arc,trim-config: setting for register IMAXTUNE + +Note: Optional properties not specified will default to values in IC EPROM + +Example: + +arc2c0608@30 { + compatible = "arc,arc2c0608"; + reg = <0x30>; + default-brightness = <500>; + label = "lcd-backlight"; + linux,default-trigger = "backlight"; + led-sources = <0 1 2 5>; +}; + diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt new file mode 100644 index 000000000..321be6640 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt @@ -0,0 +1,16 @@ +gpio-backlight bindings + +Required properties: + - compatible: "gpio-backlight" + - gpios: describes the gpio that is used for enabling/disabling the backlight. + refer to bindings/gpio/gpio.txt for more details. + +Optional properties: + - default-on: enable the backlight at boot. + +Example: + backlight { + compatible = "gpio-backlight"; + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; + default-on; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt b/Documentation/devicetree/bindings/leds/backlight/lp855x.txt new file mode 100644 index 000000000..88f56641f --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/lp855x.txt @@ -0,0 +1,72 @@ +lp855x bindings + +Required properties: + - compatible: "ti,lp8550", "ti,lp8551", "ti,lp8552", "ti,lp8553", + "ti,lp8555", "ti,lp8556", "ti,lp8557" + - reg: I2C slave address (u8) + - dev-ctrl: Value of DEVICE CONTROL register (u8). It depends on the device. + +Optional properties: + - bl-name: Backlight device name (string) + - init-brt: Initial value of backlight brightness (u8) + - pwm-period: PWM period value. Set only PWM input mode used (u32) + - rom-addr: Register address of ROM area to be updated (u8) + - rom-val: Register value to be updated (u8) + - power-supply: Regulator which controls the 3V rail + - enable-supply: Regulator which controls the EN/VDDIO input + +Example: + + /* LP8555 */ + backlight@2c { + compatible = "ti,lp8555"; + reg = <0x2c>; + + dev-ctrl = /bits/ 8 <0x00>; + pwm-period = <10000>; + + /* 4V OV, 4 output LED0 string enabled */ + rom_14h { + rom-addr = /bits/ 8 <0x14>; + rom-val = /bits/ 8 <0xcf>; + }; + + /* Heavy smoothing, 24ms ramp time step */ + rom_15h { + rom-addr = /bits/ 8 <0x15>; + rom-val = /bits/ 8 <0xc7>; + }; + + /* 4 output LED1 string enabled */ + rom_19h { + rom-addr = /bits/ 8 <0x19>; + rom-val = /bits/ 8 <0x0f>; + }; + }; + + /* LP8556 */ + backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + + bl-name = "lcd-bl"; + dev-ctrl = /bits/ 8 <0x85>; + init-brt = /bits/ 8 <0x10>; + }; + + /* LP8557 */ + backlight@2c { + compatible = "ti,lp8557"; + reg = <0x2c>; + enable-supply = <&backlight_vddio>; + power-supply = <&backlight_vdd>; + + dev-ctrl = /bits/ 8 <0x41>; + init-brt = /bits/ 8 <0x0a>; + + /* 4V OV, 4 output LED string enabled */ + rom_14h { + rom-addr = /bits/ 8 <0x14>; + rom-val = /bits/ 8 <0xcf>; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt new file mode 100644 index 000000000..b4cffdaa4 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt @@ -0,0 +1,10 @@ +88pm860x-backlight bindings + +Optional properties: + - maxim,max8925-dual-string: whether support dual string + +Example: + + backlights { + maxim,max8925-dual-string = <0>; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt b/Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt new file mode 100644 index 000000000..e5b294daf --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt @@ -0,0 +1,42 @@ +Binding for Qualcomm PM8941 WLED driver + +Required properties: +- compatible: should be "qcom,pm8941-wled" +- reg: slave address + +Optional properties: +- default-brightness: brightness value on boot, value from: 0-4095 + default: 2048 +- label: The name of the backlight device +- qcom,cs-out: bool; enable current sink output +- qcom,cabc: bool; enable content adaptive backlight control +- qcom,ext-gen: bool; use externally generated modulator signal to dim +- qcom,current-limit: mA; per-string current limit; value from 0 to 25 + default: 20mA +- qcom,current-boost-limit: mA; boost current limit; one of: + 105, 385, 525, 805, 980, 1260, 1400, 1680 + default: 805mA +- qcom,switching-freq: kHz; switching frequency; one of: + 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, + 1600, 1920, 2400, 3200, 4800, 9600, + default: 1600kHz +- qcom,ovp: V; Over-voltage protection limit; one of: + 27, 29, 32, 35 + default: 29V +- qcom,num-strings: #; number of led strings attached; value from 1 to 3 + default: 2 + +Example: + +pm8941-wled@d800 { + compatible = "qcom,pm8941-wled"; + reg = <0xd800>; + label = "backlight"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; +}; diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt new file mode 100644 index 000000000..64fa2fbd9 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt @@ -0,0 +1,61 @@ +pwm-backlight bindings + +Required properties: + - compatible: "pwm-backlight" + - pwms: OF device-tree PWM specification (see PWM binding[0]) + - power-supply: regulator for supply voltage + +Optional properties: + - pwm-names: a list of names for the PWM devices specified in the + "pwms" property (see PWM binding[0]) + - enable-gpios: contains a single GPIO specifier for the GPIO which enables + and disables the backlight (see GPIO binding[1]) + - post-pwm-on-delay-ms: Delay in ms between setting an initial (non-zero) PWM + and enabling the backlight using GPIO. + - pwm-off-delay-ms: Delay in ms between disabling the backlight using GPIO + and setting PWM value to 0. + - brightness-levels: Array of distinct brightness levels. Typically these + are in the range from 0 to 255, but any range starting at + 0 will do. The actual brightness level (PWM duty cycle) + will be interpolated from these values. 0 means a 0% duty + cycle (darkest/off), while the last value in the array + represents a 100% duty cycle (brightest). + - default-brightness-level: The default brightness level (index into the + array defined by the "brightness-levels" property). + - num-interpolated-steps: Number of interpolated steps between each value + of brightness-levels table. This way a high + resolution pwm duty cycle can be used without + having to list out every possible value in the + brightness-level array. + +[0]: Documentation/devicetree/bindings/pwm/pwm.txt +[1]: Documentation/devicetree/bindings/gpio/gpio.txt + +Example: + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 5000000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + + power-supply = <&vdd_bl_reg>; + enable-gpios = <&gpio 58 0>; + post-pwm-on-delay-ms = <10>; + pwm-off-delay-ms = <10>; + }; + +Example using num-interpolation-steps: + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 5000000>; + + brightness-levels = <0 2048 4096 8192 16384 65535>; + num-interpolated-steps = <2048>; + default-brightness-level = <4096>; + + power-supply = <&vdd_bl_reg>; + enable-gpios = <&gpio 58 0>; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/sky81452-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/sky81452-backlight.txt new file mode 100644 index 000000000..8bf2940f5 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/sky81452-backlight.txt @@ -0,0 +1,29 @@ +SKY81452-backlight bindings + +Required properties: +- compatible : Must be "skyworks,sky81452-backlight" + +Optional properties: +- name : Name of backlight device. Default is 'lcd-backlight'. +- gpios : GPIO to use to EN pin. + See Documentation/devicetree/bindings/gpio/gpio.txt +- led-sources : List of enabled channels from 0 to 5. + See Documentation/devicetree/bindings/leds/common.txt +- skyworks,ignore-pwm : Ignore both PWM input +- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming. +- skyworks,phase-shift : Enable phase shift mode +- skyworks,short-detection-threshold-volt + : It should be one of 4, 5, 6 and 7V. +- skyworks,current-limit-mA + : It should be 2300mA or 2750mA. + +Example: + + backlight { + compatible = "skyworks,sky81452-backlight"; + name = "pwm-backlight"; + led-sources = <0 1 2 5>; + skyworks,ignore-pwm; + skyworks,phase-shift; + skyworks,current-limit-mA = <2300>; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt new file mode 100644 index 000000000..5fb9279ac --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt @@ -0,0 +1,27 @@ +TPS65217 family of regulators + +The TPS65217 chip contains a boost converter and current sinks which can be +used to drive LEDs for use as backlights. + +Required properties: +- compatible: "ti,tps65217" +- reg: I2C slave address +- backlight: node for specifying WLED1 and WLED2 lines in TPS65217 +- isel: selection bit, valid values: 1 for ISEL1 (low-level) and 2 for ISEL2 (high-level) +- fdim: PWM dimming frequency, valid values: 100, 200, 500, 1000 +- default-brightness: valid values: 0-100 + +Each regulator is defined using the standard binding for regulators. + +Example: + + tps: tps@24 { + reg = <0x24>; + compatible = "ti,tps65217"; + backlight { + isel = <1>; /* 1 - ISET1, 2 ISET2 */ + fdim = <100>; /* TPS65217_BL_FDIM_100HZ */ + default-brightness = <50>; + }; + }; + diff --git a/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt new file mode 100644 index 000000000..ff5c92138 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt @@ -0,0 +1,23 @@ +Zodiac Inflight Innovations RAVE Supervisory Processor Backlight Bindings + +RAVE SP backlight device is a "MFD cell" device corresponding to +backlight functionality of RAVE Supervisory Processor. It is expected +that its Device Tree node is specified as a child of the node +corresponding to the parent RAVE SP device (as documented in +Documentation/devicetree/bindings/mfd/zii,rave-sp.txt) + +Required properties: + +- compatible: Should be "zii,rave-sp-backlight" + +Example: + + rave-sp { + compatible = "zii,rave-sp-rdu1"; + current-speed = <38400>; + + backlight { + compatible = "zii,rave-sp-backlight"; + }; + } + diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt new file mode 100644 index 000000000..aa1399814 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/common.txt @@ -0,0 +1,115 @@ +* Common leds properties. + +LED and flash LED devices provide the same basic functionality as current +regulators, but extended with LED and flash LED specific features like +blinking patterns, flash timeout, flash faults and external flash strobe mode. + +Many LED devices expose more than one current output that can be connected +to one or more discrete LED component. Since the arrangement of connections +can influence the way of the LED device initialization, the LED components +have to be tightly coupled with the LED device binding. They are represented +by child nodes of the parent LED device binding. + +Optional properties for child nodes: +- led-sources : List of device current outputs the LED is connected to. The + outputs are identified by the numbers that must be defined + in the LED device binding documentation. +- label : The label for this LED. If omitted, the label is taken from the node + name (excluding the unit address). It has to uniquely identify + a device, i.e. no other LED class device can be assigned the same + label. + +- default-state : The initial state of the LED. Valid values are "on", "off", + and "keep". If the LED is already on or off and the default-state property is + set the to same value, then no glitch should be produced where the LED + momentarily turns off (or on). The "keep" setting will keep the LED at + whatever its current state is, without producing a glitch. The default is + off if this property is not present. + +- linux,default-trigger : This parameter, if present, is a + string defining the trigger assigned to the LED. Current triggers are: + "backlight" - LED will act as a back-light, controlled by the framebuffer + system + "default-on" - LED will turn on (but for leds-gpio see "default-state" + property in Documentation/devicetree/bindings/leds/leds-gpio.txt) + "heartbeat" - LED "double" flashes at a load average based rate + "disk-activity" - LED indicates disk activity + "ide-disk" - LED indicates IDE disk activity (deprecated), + in new implementations use "disk-activity" + "timer" - LED flashes at a fixed, configurable rate + +- led-max-microamp : Maximum LED supply current in microamperes. This property + can be made mandatory for the board configurations + introducing a risk of hardware damage in case an excessive + current is set. + For flash LED controllers with configurable current this + property is mandatory for the LEDs in the non-flash modes + (e.g. torch or indicator). + +- panic-indicator : This property specifies that the LED should be used, + if at all possible, as a panic indicator. + +- trigger-sources : List of devices which should be used as a source triggering + this LED activity. Some LEDs can be related to a specific + device and should somehow indicate its state. E.g. USB 2.0 + LED may react to device(s) in a USB 2.0 port(s). + Another common example is switch or router with multiple + Ethernet ports each of them having its own LED assigned + (assuming they are not hardwired). In such cases this + property should contain phandle(s) of related source + device(s). + In many cases LED can be related to more than one device + (e.g. one USB LED vs. multiple USB ports). Each source + should be represented by a node in the device tree and be + referenced by a phandle and a set of phandle arguments. A + length of arguments should be specified by the + #trigger-source-cells property in the source node. + +Required properties for flash LED child nodes: +- flash-max-microamp : Maximum flash LED supply current in microamperes. +- flash-max-timeout-us : Maximum timeout in microseconds after which the flash + LED is turned off. + +For controllers that have no configurable current the flash-max-microamp +property can be omitted. +For controllers that have no configurable timeout the flash-max-timeout-us +property can be omitted. + +* Trigger source providers + +Each trigger source should be represented by a device tree node. It may be e.g. +a USB port or an Ethernet device. + +Required properties for trigger source: +- #trigger-source-cells : Number of cells in a source trigger. Typically 0 for + nodes of simple trigger sources (e.g. a specific USB + port). + +* Examples + +gpio-leds { + compatible = "gpio-leds"; + + system-status { + label = "Status"; + linux,default-trigger = "heartbeat"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + + usb { + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + }; +}; + +max77693-led { + compatible = "maxim,max77693-led"; + + camera-flash { + label = "Flash"; + led-sources = <0>, <1>; + led-max-microamp = <50000>; + flash-max-microamp = <320000>; + flash-max-timeout-us = <500000>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt new file mode 100644 index 000000000..cbe8dfd29 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt @@ -0,0 +1,14 @@ +Device tree bindings for IR LED connected through gpio pin which is used as +remote controller transmitter. + +Required properties: + - compatible: should be "gpio-ir-tx". + - gpios : Should specify the IR LED GPIO, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. Active low LEDs + should be indicated using flags in the GPIO specifier. + +Example: + irled@0 { + compatible = "gpio-ir-tx"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt new file mode 100644 index 000000000..66e5672c2 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt @@ -0,0 +1,13 @@ +Device tree bindings for IR LED connected through pwm pin which is used as +remote controller transmitter. + +Required properties: + - compatible: should be "pwm-ir-tx". + - pwms : PWM property to point to the PWM device (phandle)/port (id) + and to specify the period time to be used: <&phandle id period_ns>; + +Example: + irled { + compatible = "pwm-ir-tx"; + pwms = <&pwm0 0 10000000>; + }; diff --git a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt new file mode 100644 index 000000000..896b6997c --- /dev/null +++ b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt @@ -0,0 +1,29 @@ +Device tree bindings for IR LED connected through SPI bus which is used as +remote controller. + +The IR LED switch is connected to the MOSI line of the SPI device and the data +are delivered thourgh that. + +Required properties: + - compatible: should be "ir-spi-led". + +Optional properties: + - duty-cycle: 8 bit balue that represents the percentage of one period + in which the signal is active. It can be 50, 60, 70, 75, 80 or 90. + - led-active-low: boolean value that specifies whether the output is + negated with a NOT gate. + - power-supply: specifies the power source. It can either be a regulator + or a gpio which enables a regulator, i.e. a regulator-fixed as + described in + Documentation/devicetree/bindings/regulator/fixed-regulator.txt + +Example: + + irled@0 { + compatible = "ir-spi-led"; + reg = <0x0>; + spi-max-frequency = <5000000>; + power-supply = <&vdd_led>; + led-active-low; + duty-cycle = /bits/ 8 <60>; + }; diff --git a/Documentation/devicetree/bindings/leds/leds-aat1290.txt b/Documentation/devicetree/bindings/leds/leds-aat1290.txt new file mode 100644 index 000000000..85c0c5861 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-aat1290.txt @@ -0,0 +1,73 @@ +* Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs + +The device is controlled through two pins: FL_EN and EN_SET. The pins when, +asserted high, enable flash strobe and movie mode (max 1/2 of flash current) +respectively. In order to add a capability of selecting the strobe signal source +(e.g. CPU or camera sensor) there is an additional switch required, independent +of the flash chip. The switch is controlled with pin control. + +Required properties: + +- compatible : Must be "skyworks,aat1290". +- flen-gpios : Must be device tree identifier of the flash device FL_EN pin. +- enset-gpios : Must be device tree identifier of the flash device EN_SET pin. + +Optional properties: +- pinctrl-names : Must contain entries: "default", "host", "isp". Entries + "default" and "host" must refer to the same pin configuration + node, which sets the host as a strobe signal provider. Entry + "isp" must refer to the pin configuration node, which sets the + ISP as a strobe signal provider. + +A discrete LED element connected to the device must be represented by a child +node - see Documentation/devicetree/bindings/leds/common.txt. + +Required properties of the LED child node: +- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt + Maximum flash LED supply current can be calculated using + following formula: I = 1A * 162kohm / Rset. +- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt + Maximum flash timeout can be calculated using following + formula: T = 8.82 * 10^9 * Ct. + +Optional properties of the LED child node: +- label : see Documentation/devicetree/bindings/leds/common.txt + +Example (by Ct = 220nF, Rset = 160kohm and exynos4412-trats2 board with +a switch that allows for routing strobe signal either from the host or from +the camera sensor): + +#include "exynos4412.dtsi" + +aat1290 { + compatible = "skyworks,aat1290"; + flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>; + enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default", "host", "isp"; + pinctrl-0 = <&camera_flash_host>; + pinctrl-1 = <&camera_flash_host>; + pinctrl-2 = <&camera_flash_isp>; + + camera_flash: flash-led { + label = "aat1290-flash"; + led-max-microamp = <520833>; + flash-max-microamp = <1012500>; + flash-max-timeout-us = <1940000>; + }; +}; + +&pinctrl_0 { + camera_flash_host: camera-flash-host { + samsung,pins = "gpj1-0"; + samsung,pin-function = <1>; + samsung,pin-val = <0>; + }; + + camera_flash_isp: camera-flash-isp { + samsung,pins = "gpj1-0"; + samsung,pin-function = <1>; + samsung,pin-val = <1>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt new file mode 100644 index 000000000..ccebce597 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt @@ -0,0 +1,319 @@ +LEDs connected to Broadcom BCM6328 controller + +This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268. +In these SoCs it's possible to control LEDs both as GPIOs or by hardware. +However, on some devices there are Serial LEDs (LEDs connected to a 74x164 +controller), which can either be controlled by software (exporting the 74x164 +as spi-gpio. See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or +by hardware using this driver. +Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and +exporting the 74x164 as spi-gpio prevents those LEDs to be hardware +controlled, so the only chance to keep them working is by using this driver. + +BCM6328 LED controller has a HWDIS register, which controls whether a LED +should be controlled by a hardware signal instead of the MODE register value, +with 0 meaning hardware control enabled and 1 hardware control disabled. This +is usually 1:1 for hardware to LED signals, but through the activity/link +registers you have some limited control over rerouting the LEDs (as +explained later in brcm,link-signal-sources). Even if a LED is hardware +controlled you are still able to make it blink or light it up if it isn't, +but you can't turn it off if the hardware decides to light it up. For this +reason, hardware controlled LEDs aren't registered as LED class devices. + +Required properties: + - compatible : should be "brcm,bcm6328-leds". + - #address-cells : must be 1. + - #size-cells : must be 0. + - reg : BCM6328 LED controller address and size. + +Optional properties: + - brcm,serial-leds : Boolean, enables Serial LEDs. + Default : false + - brcm,serial-mux : Boolean, enables Serial LEDs multiplexing. + Default : false + - brcm,serial-clk-low : Boolean, makes clock signal active low. + Default : false + - brcm,serial-dat-low : Boolean, makes data signal active low. + Default : false + - brcm,serial-shift-inv : Boolean, inverts Serial LEDs shift direction. + Default : false + +Each LED is represented as a sub-node of the brcm,bcm6328-leds device. + +LED sub-node required properties: + - reg : LED pin number (only LEDs 0 to 23 are valid). + +LED sub-node optional properties: + a) Optional properties for sub-nodes related to software controlled LEDs: + - label : see Documentation/devicetree/bindings/leds/common.txt + - active-low : Boolean, makes LED active low. + Default : false + - default-state : see + Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : see + Documentation/devicetree/bindings/leds/common.txt + + b) Optional properties for sub-nodes related to hardware controlled LEDs: + - brcm,hardware-controlled : Boolean, makes this LED hardware controlled. + Default : false + - brcm,link-signal-sources : An array of hardware link + signal sources. Up to four link hardware signals can get muxed into + these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may + be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs + 4 to 7. A signal can be muxed to more than one LED, and one LED can + have more than one source signal. + - brcm,activity-signal-sources : An array of hardware activity + signal sources. Up to four activity hardware signals can get muxed into + these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may + be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs + 4 to 7. A signal can be muxed to more than one LED, and one LED can + have more than one source signal. + +Examples: +Scenario 1 : BCM6328 with 4 EPHY LEDs + leds0: led-controller@10000800 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10000800 0x24>; + + alarm_red@2 { + reg = <2>; + active-low; + label = "red:alarm"; + }; + inet_green@3 { + reg = <3>; + active-low; + label = "green:inet"; + }; + power_green@4 { + reg = <4>; + active-low; + label = "green:power"; + default-state = "on"; + }; + ephy0_spd@17 { + reg = <17>; + brcm,hardware-controlled; + }; + ephy1_spd@18 { + reg = <18>; + brcm,hardware-controlled; + }; + ephy2_spd@19 { + reg = <19>; + brcm,hardware-controlled; + }; + ephy3_spd@20 { + reg = <20>; + brcm,hardware-controlled; + }; + }; + +Scenario 2 : BCM63268 with Serial/GPHY0 LEDs + leds0: led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + brcm,serial-leds; + brcm,serial-dat-low; + brcm,serial-shift-inv; + + gphy0_spd0@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0>; + }; + gphy0_spd1@1 { + reg = <1>; + brcm,hardware-controlled; + brcm,link-signal-sources = <1>; + }; + inet_red@2 { + reg = <2>; + active-low; + label = "red:inet"; + }; + dsl_green@3 { + reg = <3>; + active-low; + label = "green:dsl"; + }; + usb_green@4 { + reg = <4>; + active-low; + label = "green:usb"; + }; + wps_green@7 { + reg = <7>; + active-low; + label = "green:wps"; + }; + inet_green@8 { + reg = <8>; + active-low; + label = "green:inet"; + }; + ephy0_act@9 { + reg = <9>; + brcm,hardware-controlled; + }; + ephy1_act@10 { + reg = <10>; + brcm,hardware-controlled; + }; + ephy2_act@11 { + reg = <11>; + brcm,hardware-controlled; + }; + gphy0_act@12 { + reg = <12>; + brcm,hardware-controlled; + }; + ephy0_spd@13 { + reg = <13>; + brcm,hardware-controlled; + }; + ephy1_spd@14 { + reg = <14>; + brcm,hardware-controlled; + }; + ephy2_spd@15 { + reg = <15>; + brcm,hardware-controlled; + }; + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; + +Scenario 3 : BCM6362 with 1 LED for each EPHY + leds0: led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + + usb@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0>; + brcm,activity-signal-sources = <0>; + /* USB link/activity routed to USB LED */ + }; + inet@1 { + reg = <1>; + brcm,hardware-controlled; + brcm,activity-signal-sources = <1>; + /* INET activity routed to INET LED */ + }; + ephy0@4 { + reg = <4>; + brcm,hardware-controlled; + brcm,link-signal-sources = <4>; + /* EPHY0 link routed to EPHY0 LED */ + }; + ephy1@5 { + reg = <5>; + brcm,hardware-controlled; + brcm,link-signal-sources = <5>; + /* EPHY1 link routed to EPHY1 LED */ + }; + ephy2@6 { + reg = <6>; + brcm,hardware-controlled; + brcm,link-signal-sources = <6>; + /* EPHY2 link routed to EPHY2 LED */ + }; + ephy3@7 { + reg = <7>; + brcm,hardware-controlled; + brcm,link-signal-sources = <7>; + /* EPHY3 link routed to EPHY3 LED */ + }; + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; + +Scenario 4 : BCM6362 with 1 LED for all EPHYs + leds0: led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + + usb@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0 1>; + brcm,activity-signal-sources = <0 1>; + /* USB/INET link/activity routed to USB LED */ + }; + ephy@4 { + reg = <4>; + brcm,hardware-controlled; + brcm,link-signal-sources = <4 5 6 7>; + /* EPHY0/1/2/3 link routed to EPHY0 LED */ + }; + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; + +Scenario 5 : BCM6362 with EPHY LEDs swapped + leds0: led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + + usb@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0>; + brcm,activity-signal-sources = <0 1>; + /* USB link/act and INET act routed to USB LED */ + }; + ephy0@4 { + reg = <4>; + brcm,hardware-controlled; + brcm,link-signal-sources = <7>; + /* EPHY3 link routed to EPHY0 LED */ + }; + ephy1@5 { + reg = <5>; + brcm,hardware-controlled; + brcm,link-signal-sources = <6>; + /* EPHY2 link routed to EPHY1 LED */ + }; + ephy2@6 { + reg = <6>; + brcm,hardware-controlled; + brcm,link-signal-sources = <5>; + /* EPHY1 link routed to EPHY2 LED */ + }; + ephy3@7 { + reg = <7>; + brcm,hardware-controlled; + brcm,link-signal-sources = <4>; + /* EPHY0 link routed to EPHY3 LED */ + }; + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt new file mode 100644 index 000000000..da5708e7b --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt @@ -0,0 +1,145 @@ +LEDs connected to Broadcom BCM6358 controller + +This controller is present on BCM6358 and BCM6368. +In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller), +which can either be controlled by software (exporting the 74x164 as spi-gpio. +See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or +by hardware using this driver. + +Required properties: + - compatible : should be "brcm,bcm6358-leds". + - #address-cells : must be 1. + - #size-cells : must be 0. + - reg : BCM6358 LED controller address and size. + +Optional properties: + - brcm,clk-div : SCK signal divider. Possible values are 1, 2, 4 and 8. + Default : 1 + - brcm,clk-dat-low : Boolean, makes clock and data signals active low. + Default : false + +Each LED is represented as a sub-node of the brcm,bcm6358-leds device. + +LED sub-node required properties: + - reg : LED pin number (only LEDs 0 to 31 are valid). + +LED sub-node optional properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + - active-low : Boolean, makes LED active low. + Default : false + - default-state : see + Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : see + Documentation/devicetree/bindings/leds/common.txt + +Examples: +Scenario 1 : BCM6358 + leds0: led-controller@fffe00d0 { + compatible = "brcm,bcm6358-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfffe00d0 0x8>; + + alarm_white { + reg = <0>; + active-low; + label = "white:alarm"; + }; + tv_white { + reg = <2>; + active-low; + label = "white:tv"; + }; + tel_white { + reg = <3>; + active-low; + label = "white:tel"; + }; + adsl_white { + reg = <4>; + active-low; + label = "white:adsl"; + }; + }; + +Scenario 2 : BCM6368 + leds0: led-controller@100000d0 { + compatible = "brcm,bcm6358-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x100000d0 0x8>; + brcm,pol-low; + brcm,clk-div = <4>; + + power_red { + reg = <0>; + active-low; + label = "red:power"; + }; + power_green { + reg = <1>; + active-low; + label = "green:power"; + default-state = "on"; + }; + power_blue { + reg = <2>; + label = "blue:power"; + }; + broadband_red { + reg = <3>; + active-low; + label = "red:broadband"; + }; + broadband_green { + reg = <4>; + label = "green:broadband"; + }; + broadband_blue { + reg = <5>; + active-low; + label = "blue:broadband"; + }; + wireless_red { + reg = <6>; + active-low; + label = "red:wireless"; + }; + wireless_green { + reg = <7>; + active-low; + label = "green:wireless"; + }; + wireless_blue { + reg = <8>; + label = "blue:wireless"; + }; + phone_red { + reg = <9>; + active-low; + label = "red:phone"; + }; + phone_green { + reg = <10>; + active-low; + label = "green:phone"; + }; + phone_blue { + reg = <11>; + label = "blue:phone"; + }; + upgrading_red { + reg = <12>; + active-low; + label = "red:upgrading"; + }; + upgrading_green { + reg = <13>; + active-low; + label = "green:upgrading"; + }; + upgrading_blue { + reg = <14>; + label = "blue:upgrading"; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/leds-cpcap.txt b/Documentation/devicetree/bindings/leds/leds-cpcap.txt new file mode 100644 index 000000000..ebf7cdc7f --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-cpcap.txt @@ -0,0 +1,29 @@ +Motorola CPCAP PMIC LEDs +------------------------ + +This module is part of the CPCAP. For more details about the whole +chip see Documentation/devicetree/bindings/mfd/motorola-cpcap.txt. + +Requires node properties: +- compatible: should be one of + * "motorola,cpcap-led-mdl" (Main Display Lighting) + * "motorola,cpcap-led-kl" (Keyboard Lighting) + * "motorola,cpcap-led-adl" (Aux Display Lighting) + * "motorola,cpcap-led-red" (Red Triode) + * "motorola,cpcap-led-green" (Green Triode) + * "motorola,cpcap-led-blue" (Blue Triode) + * "motorola,cpcap-led-cf" (Camera Flash) + * "motorola,cpcap-led-bt" (Bluetooth) + * "motorola,cpcap-led-cp" (Camera Privacy LED) +- label: see Documentation/devicetree/bindings/leds/common.txt +- vdd-supply: A phandle to the regulator powering the LED + +Example: + +&cpcap { + cpcap_led_red: red-led { + compatible = "motorola,cpcap-led-red"; + label = "cpcap:red"; + vdd-supply = <&sw5>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-cr0014114.txt b/Documentation/devicetree/bindings/leds/leds-cr0014114.txt new file mode 100644 index 000000000..4255b19ad --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-cr0014114.txt @@ -0,0 +1,54 @@ +Crane Merchandising System - cr0014114 LED driver +------------------------------------------------- + +This LED Board is widely used in vending machines produced +by Crane Merchandising Systems. + +Required properties: +- compatible: "crane,cr0014114" + +Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt +apply. In particular, "reg" and "spi-max-frequency" properties must be given. + +LED sub-node properties: +- label : + see Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt + +Example +------- + +led-controller@0 { + compatible = "crane,cr0014114"; + reg = <0>; + spi-max-frequency = <50000>; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "red:coin"; + }; + led@1 { + reg = <1>; + label = "green:coin"; + }; + led@2 { + reg = <2>; + label = "blue:coin"; + }; + led@3 { + reg = <3>; + label = "red:bill"; + }; + led@4 { + reg = <4>; + label = "green:bill"; + }; + led@5 { + reg = <5>; + label = "blue:bill"; + }; + ... +}; diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt new file mode 100644 index 000000000..a48dda268 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt @@ -0,0 +1,66 @@ +LEDs connected to GPIO lines + +Required properties: +- compatible : should be "gpio-leds". + +Each LED is represented as a sub-node of the gpio-leds device. Each +node's name represents the name of the corresponding LED. + +LED sub-node properties: +- gpios : Should specify the LED's GPIO, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. Active low LEDs should be + indicated using flags in the GPIO specifier. +- label : (optional) + see Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt +- default-state: (optional) The initial state of the LED. + see Documentation/devicetree/bindings/leds/common.txt +- retain-state-suspended: (optional) The suspend state can be retained.Such + as charge-led gpio. +- retain-state-shutdown: (optional) Retain the state of the LED on shutdown. + Useful in BMC systems, for example when the BMC is rebooted while the host + remains up. +- panic-indicator : (optional) + see Documentation/devicetree/bindings/leds/common.txt + +Examples: + +#include <dt-bindings/gpio/gpio.h> + +leds { + compatible = "gpio-leds"; + hdd { + label = "Disk Activity"; + gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + }; + + fault { + gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>; + /* Keep LED on if BIOS detected hardware fault */ + default-state = "keep"; + }; +}; + +run-control { + compatible = "gpio-leds"; + red { + gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + green { + gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; +}; + +leds { + compatible = "gpio-leds"; + + charger-led { + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "max8903-charger-charging"; + retain-state-suspended; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt b/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt new file mode 100644 index 000000000..fc2603484 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt @@ -0,0 +1,59 @@ +LEDs connected to is31fl319x LED controller chip + +Required properties: +- compatible : Should be any of + "issi,is31fl3190" + "issi,is31fl3191" + "issi,is31fl3193" + "issi,is31fl3196" + "issi,is31fl3199" + "si-en,sn3199". +- #address-cells: Must be 1. +- #size-cells: Must be 0. +- reg: 0x64, 0x65, 0x66, or 0x67. + +Optional properties: +- audio-gain-db : audio gain selection for external analog modulation input. + Valid values: 0 - 21, step by 3 (rounded down) + Default: 0 + +Each led is represented as a sub-node of the issi,is31fl319x device. +There can be less leds subnodes than the chip can support but not more. + +Required led sub-node properties: +- reg : number of LED line + Valid values: 1 - number of leds supported by the chip variant. + +Optional led sub-node properties: +- label : see Documentation/devicetree/bindings/leds/common.txt. +- linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt. +- led-max-microamp : (optional) + Valid values: 5000 - 40000, step by 5000 (rounded down) + Default: 20000 (20 mA) + Note: a driver will take the lowest of all led limits since the + chip has a single global setting. The lowest value will be chosen + due to the PWM specificity, where lower brightness is achieved + by reducing the dury-cycle of pulses and not the current, which + will always have its peak value equal to led-max-microamp. + +Examples: + +fancy_leds: leds@65 { + compatible = "issi,is31fl3196"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x65>; + + red_aux: led@1 { + label = "red:aux"; + reg = <1>; + led-max-microamp = <10000>; + }; + + green_power: led@5 { + label = "green:power"; + reg = <5>; + linux,default-trigger = "default-on"; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt b/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt new file mode 100644 index 000000000..926c21179 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt @@ -0,0 +1,52 @@ +Binding for ISSI IS31FL32xx and Si-En SN32xx LED Drivers + +The IS31FL32xx/SN32xx family of LED drivers are I2C devices with multiple +constant-current channels, each with independent 256-level PWM control. +Each LED is represented as a sub-node of the device. + +Required properties: +- compatible: one of + issi,is31fl3236 + issi,is31fl3235 + issi,is31fl3218 + issi,is31fl3216 + si-en,sn3218 + si-en,sn3216 +- reg: I2C slave address +- address-cells : must be 1 +- size-cells : must be 0 + +LED sub-node properties: +- reg : LED channel number (1..N) +- label : (optional) + see Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt + + +Example: + +is31fl3236: led-controller@3c { + compatible = "issi,is31fl3236"; + reg = <0x3c>; + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + label = "EB:blue:usr0"; + }; + led@2 { + reg = <2>; + label = "EB:blue:usr1"; + }; + ... + led@36 { + reg = <36>; + label = "EB:blue:usr35"; + }; +}; + +For more product information please see the links below: +http://www.issi.com/US/product-analog-fxled-driver.shtml +http://www.si-en.com/product.asp?parentid=890 diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt new file mode 100644 index 000000000..853737452 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt @@ -0,0 +1,50 @@ +* Kinetic Technologies - KTD2692 Flash LED Driver + +KTD2692 is the ideal power solution for high-power flash LEDs. +It uses ExpressWire single-wire programming for maximum flexibility. + +The ExpressWire interface through CTRL pin can control LED on/off and +enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current, +Flash timeout, LVP(low voltage protection). + +Also, When the AUX pin is pulled high while CTRL pin is high, +LED current will be ramped up to the flash-mode current level. + +Required properties: +- compatible : Should be "kinetic,ktd2692". +- ctrl-gpios : Specifier of the GPIO connected to CTRL pin. +- aux-gpios : Specifier of the GPIO connected to AUX pin. + +Optional properties: +- vin-supply : "vin" LED supply (2.7V to 5.5V). + See Documentation/devicetree/bindings/regulator/regulator.txt + +A discrete LED element connected to the device must be represented by a child +node - See Documentation/devicetree/bindings/leds/common.txt + +Required properties for flash LED child nodes: + See Documentation/devicetree/bindings/leds/common.txt +- led-max-microamp : Minimum Threshold for Timer protection + is defined internally (Maximum 300mA). +- flash-max-microamp : Flash LED maximum current + Formula : I(mA) = 15000 / Rset. +- flash-max-timeout-us : Flash LED maximum timeout. + +Optional properties for flash LED child nodes: +- label : See Documentation/devicetree/bindings/leds/common.txt + +Example: + +ktd2692 { + compatible = "kinetic,ktd2692"; + ctrl-gpios = <&gpc0 1 0>; + aux-gpios = <&gpc0 2 0>; + vin-supply = <&vbat>; + + flash-led { + label = "ktd2692-flash"; + led-max-microamp = <300000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1835000>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-lm3601x.txt b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt new file mode 100644 index 000000000..a88b2c41e --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt @@ -0,0 +1,45 @@ +* Texas Instruments - lm3601x Single-LED Flash Driver + +The LM3601X are ultra-small LED flash drivers that +provide a high level of adjustability. + +Required properties: + - compatible : Can be one of the following + "ti,lm36010" + "ti,lm36011" + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 + +Required child properties: + - reg : 0 - Indicates a IR mode + 1 - Indicates a Torch (white LED) mode + +Required properties for flash LED child nodes: + See Documentation/devicetree/bindings/leds/common.txt + - flash-max-microamp : Range from 11mA - 1.5A + - flash-max-timeout-us : Range from 40ms - 1600ms + - led-max-microamp : Range from 2.4mA - 376mA + +Optional child properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + +Example: +led-controller@64 { + compatible = "ti,lm36010"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x64>; + + led@0 { + reg = <1>; + label = "white:torch"; + led-max-microamp = <376000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1600000>; + }; +} + +For more product information please see the links below: +http://www.ti.com/product/LM36010 +http://www.ti.com/product/LM36011 diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt new file mode 100644 index 000000000..08b352840 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt @@ -0,0 +1,52 @@ +* Texas Instruments - LM3692x Highly Efficient White LED Driver + +The LM3692x is an ultra-compact, highly efficient, +white-LED driver designed for LCD display backlighting. + +The main difference between the LM36922 and LM36923 is the number of +LED strings it supports. The LM36922 supports two strings while the LM36923 +supports three strings. + +Required properties: + - compatible: + "ti,lm36922" + "ti,lm36923" + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 + +Optional properties: + - enable-gpios : gpio pin to enable/disable the device. + - vled-supply : LED supply + +Required child properties: + - reg : 0 - Will enable all LED sync paths + 1 - Will enable the LED1 sync + 2 - Will enable the LED2 sync + 3 - Will enable the LED3 sync (LM36923 only) + +Optional child properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + +Example: + +led-controller@36 { + compatible = "ti,lm3692x"; + reg = <0x36>; + #address-cells = <1>; + #size-cells = <0>; + + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + vled-supply = <&vbatt>; + + led@0 { + reg = <0>; + label = "white:backlight_cluster"; + linux,default-trigger = "backlight"; + }; +} + +For more product information please see the link below: +http://www.ti.com/lit/ds/snvsa29/snvsa29.pdf diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt new file mode 100644 index 000000000..1b66a413f --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt @@ -0,0 +1,228 @@ +Binding for TI/National Semiconductor LP55xx Led Drivers + +Required properties: +- compatible: one of + national,lp5521 + national,lp5523 + ti,lp55231 + ti,lp5562 + ti,lp8501 + +- reg: I2C slave address +- clock-mode: Input clock mode, (0: automode, 1: internal, 2: external) + +Each child has own specific current settings +- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected) +- max-cur: Maximun current at each led channel. + +Optional properties: +- enable-gpio: GPIO attached to the chip's enable pin +- label: Used for naming LEDs +- pwr-sel: LP8501 specific property. Power selection for output channels. + 0: D1~9 are connected to VDD + 1: D1~6 with VDD, D7~9 with VOUT + 2: D1~6 with VOUT, D7~9 with VDD + 3: D1~9 are connected to VOUT + +Alternatively, each child can have a specific channel name and trigger: +- chan-name (optional): name of channel +- linux,default-trigger (optional): see + Documentation/devicetree/bindings/leds/common.txt + +example 1) LP5521 +3 LED channels, external clock used. Channel names are 'lp5521_pri:channel0', +'lp5521_pri:channel1' and 'lp5521_pri:channel2', with a heartbeat trigger +on channel 0. + +lp5521@32 { + compatible = "national,lp5521"; + reg = <0x32>; + label = "lp5521_pri"; + clock-mode = /bits/ 8 <2>; + + chan0 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + linux,default-trigger = "heartbeat"; + }; + + chan1 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; + + chan2 { + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + }; +}; + +example 2) LP5523 +9 LED channels with specific name. Internal clock used. +The I2C slave address is configurable with ASEL1 and ASEL0 pins. +Available addresses are 32/33/34/35h. + +ASEL1 ASEL0 Address +------------------------- + GND GND 32h + GND VEN 33h + VEN GND 34h + VEN VEN 35h + +lp5523@32 { + compatible = "national,lp5523"; + reg = <0x32>; + clock-mode = /bits/ 8 <1>; + + chan0 { + chan-name = "d1"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan1 { + chan-name = "d2"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan2 { + chan-name = "d3"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan3 { + chan-name = "d4"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan4 { + chan-name = "d5"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan5 { + chan-name = "d6"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan6 { + chan-name = "d7"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan7 { + chan-name = "d8"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan8 { + chan-name = "d9"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; +}; + +example 3) LP5562 +4 channels are defined. + +lp5562@30 { + compatible = "ti,lp5562"; + reg = <0x30>; + clock-mode = /bits/8 <2>; + + chan0 { + chan-name = "R"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + + chan1 { + chan-name = "G"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + + chan2 { + chan-name = "B"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + + chan3 { + chan-name = "W"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; +}; + +example 4) LP8501 +9 channels are defined. The 'pwr-sel' is LP8501 specific property. +Others are same as LP5523. + +lp8501@32 { + compatible = "ti,lp8501"; + reg = <0x32>; + clock-mode = /bits/ 8 <2>; + pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */ + + chan0 { + chan-name = "d1"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan1 { + chan-name = "d2"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan2 { + chan-name = "d3"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan3 { + chan-name = "d4"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan4 { + chan-name = "d5"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan5 { + chan-name = "d6"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan6 { + chan-name = "d7"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan7 { + chan-name = "d8"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + chan8 { + chan-name = "d9"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt new file mode 100644 index 000000000..5f0e892ad --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt @@ -0,0 +1,45 @@ +* Texas Instruments - lp8860 4-Channel LED Driver + +The LP8860-Q1 is an high-efficiency LED +driver with boost controller. It has 4 high-precision +current sinks that can be controlled by a PWM input +signal, a SPI/I2C master, or both. + +Required properties: + - compatible : + "ti,lp8860" + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 + +Optional properties: + - enable-gpios : gpio pin to enable (active high)/disable the device. + - vled-supply : LED supply + +Required child properties: + - reg : 0 + +Optional child properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + +Example: + +led-controller@2d { + compatible = "ti,lp8860"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2d>; + enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + vled-supply = <&vbatt>; + + led@0 { + reg = <0>; + label = "white:backlight"; + linux,default-trigger = "backlight"; + }; +} + +For more product information please see the link below: +http://www.ti.com/product/lp8860-q1 diff --git a/Documentation/devicetree/bindings/leds/leds-lt3593.txt b/Documentation/devicetree/bindings/leds/leds-lt3593.txt new file mode 100644 index 000000000..6b2cabc36 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lt3593.txt @@ -0,0 +1,32 @@ +Bindings for Linear Technologies LT3593 LED controller + +Required properties: +- compatible: Should be "lltc,lt3593". +- lltc,ctrl-gpios: A handle to the GPIO that is connected to the 'CTRL' + pin of the chip. + +The hardware supports only one LED. The properties of this LED are +configured in a sub-node in the device node. + +Optional sub-node properties: +- label: A label for the LED. If none is given, the LED will be + named "lt3595::". +- linux,default-trigger: The default trigger for the LED. + See Documentation/devicetree/bindings/leds/common.txt +- default-state: The initial state of the LED. + See Documentation/devicetree/bindings/leds/common.txt + +If multiple chips of this type are found in a design, each one needs to +be handled by its own device node. + +Example: + +led-controller { + compatible = "lltc,lt3593"; + lltc,ctrl-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + + led { + label = "white:backlight"; + default-state = "on"; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt new file mode 100644 index 000000000..45bf9f7d8 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt @@ -0,0 +1,60 @@ +Device Tree Bindings for LED support on MT6323 PMIC + +MT6323 LED controller is subfunction provided by MT6323 PMIC, so the LED +controllers are defined as the subnode of the function node provided by MT6323 +PMIC controller that is being defined as one kind of Muti-Function Device (MFD) +using shared bus called PMIC wrapper for each subfunction to access remote +MT6323 PMIC hardware. + +For MT6323 MFD bindings see: +Documentation/devicetree/bindings/mfd/mt6397.txt +For MediaTek PMIC wrapper bindings see: +Documentation/devicetree/bindings/soc/mediatek/pwrap.txt + +Required properties: +- compatible : Must be "mediatek,mt6323-led" +- address-cells : Must be 1 +- size-cells : Must be 0 + +Each led is represented as a child node of the mediatek,mt6323-led that +describes the initial behavior for each LED physically and currently only four +LED child nodes can be supported. + +Required properties for the LED child node: +- reg : LED channel number (0..3) + +Optional properties for the LED child node: +- label : See Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger : See Documentation/devicetree/bindings/leds/common.txt +- default-state: See Documentation/devicetree/bindings/leds/common.txt + +Example: + + mt6323: pmic { + compatible = "mediatek,mt6323"; + + ... + + mt6323led: leds { + compatible = "mediatek,mt6323-led"; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + label = "LED0"; + linux,default-trigger = "timer"; + default-state = "on"; + }; + led@1 { + reg = <1>; + label = "LED1"; + default-state = "off"; + }; + led@2 { + reg = <2>; + label = "LED2"; + default-state = "on"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/leds-netxbig.txt b/Documentation/devicetree/bindings/leds/leds-netxbig.txt new file mode 100644 index 000000000..5ef92a26d --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-netxbig.txt @@ -0,0 +1,92 @@ +Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate +boards (Example: 2Big/5Big Network v2, 2Big NAS). + +Required properties: +- compatible: "lacie,netxbig-leds". +- gpio-ext: Phandle for the gpio-ext bus. + +Optional properties: +- timers: Timer array. Each timer entry is represented by three integers: + Mode (gpio-ext bus), delay_on and delay_off. + +Each LED is represented as a sub-node of the netxbig-leds device. + +Required sub-node properties: +- mode-addr: Mode register address on gpio-ext bus. +- mode-val: Mode to value mapping. Each entry is represented by two integers: + A mode and the corresponding value on the gpio-ext bus. +- bright-addr: Brightness register address on gpio-ext bus. +- max-brightness: Maximum brightness value. + +Optional sub-node properties: +- label: Name for this LED. If omitted, the label is taken from the node name. +- linux,default-trigger: Trigger assigned to the LED. + +Example: + +netxbig-leds { + compatible = "lacie,netxbig-leds"; + + gpio-ext = &gpio_ext; + + timers = <NETXBIG_LED_TIMER1 500 500 + NETXBIG_LED_TIMER2 500 1000>; + + blue-power { + label = "netxbig:blue:power"; + mode-addr = <0>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 1 + NETXBIG_LED_TIMER1 3 + NETXBIG_LED_TIMER2 7>; + bright-addr = <1>; + max-brightness = <7>; + }; + red-power { + label = "netxbig:red:power"; + mode-addr = <0>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <1>; + max-brightness = <7>; + }; + blue-sata0 { + label = "netxbig:blue:sata0"; + mode-addr = <3>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 7 + NETXBIG_LED_SATA 1 + NETXBIG_LED_TIMER1 3>; + bright-addr = <2>; + max-brightness = <7>; + }; + red-sata0 { + label = "netxbig:red:sata0"; + mode-addr = <3>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <2>; + max-brightness = <7>; + }; + blue-sata1 { + label = "netxbig:blue:sata1"; + mode-addr = <4>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 7 + NETXBIG_LED_SATA 1 + NETXBIG_LED_TIMER1 3>; + bright-addr = <2>; + max-brightness = <7>; + }; + red-sata1 { + label = "netxbig:red:sata1"; + mode-addr = <4>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <2>; + max-brightness = <7>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-ns2.txt b/Documentation/devicetree/bindings/leds/leds-ns2.txt new file mode 100644 index 000000000..9f81258a5 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-ns2.txt @@ -0,0 +1,35 @@ +Binding for dual-GPIO LED found on Network Space v2 (and parents). + +Required properties: +- compatible: "lacie,ns2-leds". + +Each LED is represented as a sub-node of the ns2-leds device. + +Required sub-node properties: +- cmd-gpio: Command LED GPIO. See OF device-tree GPIO specification. +- slow-gpio: Slow LED GPIO. See OF device-tree GPIO specification. +- modes-map: A mapping between LED modes (off, on or SATA activity blinking) and + the corresponding cmd-gpio/slow-gpio values. All the GPIO values combinations + should be given in order to avoid having an unknown mode at driver probe time. + +Optional sub-node properties: +- label: Name for this LED. If omitted, the label is taken from the node name. +- linux,default-trigger: Trigger assigned to the LED. + +Example: + +#include <dt-bindings/leds/leds-ns2.h> + +ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + modes-map = <NS_V2_LED_OFF 0 1 + NS_V2_LED_ON 1 0 + NS_V2_LED_ON 0 0 + NS_V2_LED_SATA 1 1>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-pca9532.txt b/Documentation/devicetree/bindings/leds/leds-pca9532.txt new file mode 100644 index 000000000..f769c52e3 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-pca9532.txt @@ -0,0 +1,49 @@ +*NXP - pca9532 PWM LED Driver + +The PCA9532 family is SMBus I/O expander optimized for dimming LEDs. +The PWM support 256 steps. + +Required properties: + - compatible: + "nxp,pca9530" + "nxp,pca9531" + "nxp,pca9532" + "nxp,pca9533" + - reg - I2C slave address + +Each led is represented as a sub-node of the nxp,pca9530. + +Optional sub-node properties: + - label: see Documentation/devicetree/bindings/leds/common.txt + - type: Output configuration, see dt-bindings/leds/leds-pca9532.h (default NONE) + - linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt + - default-state: see Documentation/devicetree/bindings/leds/common.txt + This property is only valid for sub-nodes of type <PCA9532_TYPE_LED>. + +Example: + #include <dt-bindings/leds/leds-pca9532.h> + + leds: pca9530@60 { + compatible = "nxp,pca9530"; + reg = <0x60>; + + red-power { + label = "pca:red:power"; + type = <PCA9532_TYPE_LED>; + }; + green-power { + label = "pca:green:power"; + type = <PCA9532_TYPE_LED>; + }; + kernel-booting { + type = <PCA9532_TYPE_LED>; + default-state = "on"; + }; + sys-stat { + type = <PCA9532_TYPE_LED>; + default-state = "keep"; // don't touch, was set by U-Boot + }; + }; + +For more product information please see the link below: +http://nxp.com/documents/data_sheet/PCA9532.pdf diff --git a/Documentation/devicetree/bindings/leds/leds-pca955x.txt b/Documentation/devicetree/bindings/leds/leds-pca955x.txt new file mode 100644 index 000000000..7984efb76 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-pca955x.txt @@ -0,0 +1,88 @@ +* NXP - pca955x LED driver + +The PCA955x family of chips are I2C LED blinkers whose pins not used +to control LEDs can be used as general purpose I/Os. The GPIO pins can +be input or output, and output pins can also be pulse-width controlled. + +Required properties: +- compatible : should be one of : + "nxp,pca9550" + "nxp,pca9551" + "nxp,pca9552" + "nxp,pca9553" +- #address-cells: must be 1 +- #size-cells: must be 0 +- reg: I2C slave address. depends on the model. + +Optional properties: +- gpio-controller: allows pins to be used as GPIOs. +- #gpio-cells: must be 2. +- gpio-line-names: define the names of the GPIO lines + +LED sub-node properties: +- reg : number of LED line. + from 0 to 1 for the pca9550 + from 0 to 7 for the pca9551 + from 0 to 15 for the pca9552 + from 0 to 3 for the pca9553 +- type: (optional) either + PCA9532_TYPE_NONE + PCA9532_TYPE_LED + PCA9532_TYPE_GPIO + see dt-bindings/leds/leds-pca955x.h (default to LED) +- label : (optional) + see Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt + +Examples: + +pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x60>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "GPIO12", "GPIO13", "GPIO14", "GPIO15"; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + + led@0 { + label = "red:power"; + linux,default-trigger = "default-on"; + reg = <0>; + type = <PCA955X_TYPE_LED>; + }; + led@1 { + label = "green:power"; + reg = <1>; + type = <PCA955X_TYPE_LED>; + }; + led@2 { + label = "pca9552:yellow"; + reg = <2>; + type = <PCA955X_TYPE_LED>; + }; + led@3 { + label = "pca9552:white"; + reg = <3>; + type = <PCA955X_TYPE_LED>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-pm8058.txt b/Documentation/devicetree/bindings/leds/leds-pm8058.txt new file mode 100644 index 000000000..89584c49a --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-pm8058.txt @@ -0,0 +1,67 @@ +Qualcomm PM8058 LED driver + +The Qualcomm PM8058 is a multi-functional device which contains +an LED driver block for up to six LEDs: three normal LEDs, two +"flash" LEDs and one "keypad backlight" LED. The names are +quoted because sometimes these LED drivers are used for wildly +different things than flash or keypad backlight: their names +are more of a suggestion than a hard-wired usecase. + +Hardware-wise the different LEDs support slightly different +output currents. The "flash" LEDs do not need to charge nor +do they support external triggers. They are just powerful LED +drivers. + +The LEDs appear as children to the PM8058 device, with the +proper compatible string. For the PM8058 bindings see: +mfd/qcom-pm8xxx.txt. + +Each LED is represented as a sub-node of the syscon device. Each +node's name represents the name of the corresponding LED. + +LED sub-node properties: + +Required properties: +- compatible: one of + "qcom,pm8058-led" (for the normal LEDs at 0x131, 0x132 and 0x133) + "qcom,pm8058-keypad-led" (for the "keypad" LED at 0x48) + "qcom,pm8058-flash-led" (for the "flash" LEDs at 0x49 and 0xFB) + +Optional properties: +- label: see Documentation/devicetree/bindings/leds/common.txt +- default-state: see Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt + +Example: + +qcom,ssbi@500000 { + pmicintc: pmic@0 { + compatible = "qcom,pm8058"; + led@48 { + compatible = "qcom,pm8058-keypad-led"; + reg = <0x48>; + label = "pm8050:white:keypad"; + default-state = "off"; + }; + led@131 { + compatible = "qcom,pm8058-led"; + reg = <0x131>; + label = "pm8058:red"; + default-state = "off"; + }; + led@132 { + compatible = "qcom,pm8058-led"; + reg = <0x132>; + label = "pm8058:yellow"; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + led@133 { + compatible = "qcom,pm8058-led"; + reg = <0x133>; + label = "pm8058:green"; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-powernv.txt b/Documentation/devicetree/bindings/leds/leds-powernv.txt new file mode 100644 index 000000000..66655690f --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-powernv.txt @@ -0,0 +1,26 @@ +Device Tree binding for LEDs on IBM Power Systems +------------------------------------------------- + +Required properties: +- compatible : Should be "ibm,opal-v3-led". +- led-mode : Should be "lightpath" or "guidinglight". + +Each location code of FRU/Enclosure must be expressed in the +form of a sub-node. + +Required properties for the sub nodes: +- led-types : Supported LED types (attention/identify/fault) provided + in the form of string array. + +Example: + +leds { + compatible = "ibm,opal-v3-led"; + led-mode = "lightpath"; + + U78C9.001.RST0027-P1-C1 { + led-types = "identify", "fault"; + }; + ... + ... +}; diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.txt b/Documentation/devicetree/bindings/leds/leds-pwm.txt new file mode 100644 index 000000000..6c6583c35 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-pwm.txt @@ -0,0 +1,50 @@ +LED connected to PWM + +Required properties: +- compatible : should be "pwm-leds". + +Each LED is represented as a sub-node of the pwm-leds device. Each +node's name represents the name of the corresponding LED. + +LED sub-node properties: +- pwms : PWM property to point to the PWM device (phandle)/port (id) and to + specify the period time to be used: <&phandle id period_ns>; +- pwm-names : (optional) Name to be used by the PWM subsystem for the PWM device + For the pwms and pwm-names property please refer to: + Documentation/devicetree/bindings/pwm/pwm.txt +- max-brightness : Maximum brightness possible for the LED +- active-low : (optional) For PWMs where the LED is wired to supply + rather than ground. +- label : (optional) + see Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt + +Example: + +twl_pwm: pwm { + /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */ + compatible = "ti,twl6030-pwm"; + #pwm-cells = <2>; +}; + +twl_pwmled: pwmled { + /* provides one PWM (id 0 for Charing indicator LED) */ + compatible = "ti,twl6030-pwmled"; + #pwm-cells = <2>; +}; + +pwmleds { + compatible = "pwm-leds"; + kpad { + label = "omap4::keypad"; + pwms = <&twl_pwm 0 7812500>; + max-brightness = <127>; + }; + + charging { + label = "omap4:green:chrg"; + pwms = <&twl_pwmled 0 7812500>; + max-brightness = <255>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt new file mode 100644 index 000000000..dddf84f9c --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt @@ -0,0 +1,41 @@ +LEDs connected to Spreadtrum SC27XX PMIC breathing light controller + +The SC27xx breathing light controller supports to 3 outputs: +red LED, green LED and blue LED. Each LED can work at normal +PWM mode or breath light mode. + +Required properties: +- compatible: Should be "sprd,sc2731-bltc". +- #address-cells: Must be 1. +- #size-cells: Must be 0. +- reg: Specify the controller address. + +Required child properties: +- reg: Port this LED is connected to. + +Optional child properties: +- label: See Documentation/devicetree/bindings/leds/common.txt. + +Examples: + +led-controller@200 { + compatible = "sprd,sc2731-bltc"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x200>; + + led@0 { + label = "red"; + reg = <0x0>; + }; + + led@1 { + label = "green"; + reg = <0x1>; + }; + + led@2 { + label = "blue"; + reg = <0x2>; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt b/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt new file mode 100644 index 000000000..3bbbf7024 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt @@ -0,0 +1,40 @@ +LEDs connected to tlc59116 or tlc59108 + +Required properties +- compatible: should be "ti,tlc59116" or "ti,tlc59108" +- #address-cells: must be 1 +- #size-cells: must be 0 +- reg: typically 0x68 + +Each led is represented as a sub-node of the ti,tlc59116. +See Documentation/devicetree/bindings/leds/common.txt + +LED sub-node properties: +- reg: number of LED line, 0 to 15 or 0 to 7 +- label: (optional) name of LED +- linux,default-trigger : (optional) + +Examples: + +tlc59116@68 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,tlc59116"; + reg = <0x68>; + + wan@0 { + label = "wrt1900ac:amber:wan"; + reg = <0x0>; + }; + + 2g@2 { + label = "wrt1900ac:white:2g"; + reg = <0x2>; + }; + + alive@9 { + label = "wrt1900ac:green:alive"; + reg = <0x9>; + linux,default_trigger = "heartbeat"; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt new file mode 100644 index 000000000..4eee41482 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/pca963x.txt @@ -0,0 +1,52 @@ +LEDs connected to pca9632, pca9633 or pca9634 + +Required properties: +- compatible : should be : "nxp,pca9632", "nxp,pca9633", "nxp,pca9634" or "nxp,pca9635" + +Optional properties: +- nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults + to open-drain, newer chips to totem pole) +- nxp,hw-blink : use hardware blinking instead of software blinking +- nxp,period-scale : In some configurations, the chip blinks faster than expected. + This parameter provides a scaling ratio (fixed point, decimal divided + by 1000) to compensate, e.g. 1300=1.3x and 750=0.75x. +- nxp,inverted-out: invert the polarity of the generated PWM + +Each led is represented as a sub-node of the nxp,pca963x device. + +LED sub-node properties: +- label : (optional) see Documentation/devicetree/bindings/leds/common.txt +- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633, + 0 to 7 in pca9634, or 0 to 15 in pca9635) +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt + +Examples: + +pca9632: pca9632 { + compatible = "nxp,pca9632"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x62>; + + red@0 { + label = "red"; + reg = <0>; + linux,default-trigger = "none"; + }; + green@1 { + label = "green"; + reg = <1>; + linux,default-trigger = "none"; + }; + blue@2 { + label = "blue"; + reg = <2>; + linux,default-trigger = "none"; + }; + unused@3 { + label = "unused"; + reg = <3>; + linux,default-trigger = "none"; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.txt b/Documentation/devicetree/bindings/leds/register-bit-led.txt new file mode 100644 index 000000000..cf1ea403b --- /dev/null +++ b/Documentation/devicetree/bindings/leds/register-bit-led.txt @@ -0,0 +1,94 @@ +Device Tree Bindings for Register Bit LEDs + +Register bit leds are used with syscon multifunctional devices +where single bits in a certain register can turn on/off a +single LED. The register bit LEDs appear as children to the +syscon device, with the proper compatible string. For the +syscon bindings see: +Documentation/devicetree/bindings/mfd/syscon.txt + +Each LED is represented as a sub-node of the syscon device. Each +node's name represents the name of the corresponding LED. + +LED sub-node properties: + +Required properties: +- compatible : must be "register-bit-led" +- offset : register offset to the register controlling this LED +- mask : bit mask for the bit controlling this LED in the register + typically 0x01, 0x02, 0x04 ... + +Optional properties: +- label : (optional) + see Documentation/devicetree/bindings/leds/common.txt +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt +- default-state: (optional) The initial state of the LED + see Documentation/devicetree/bindings/leds/common.txt + +Example: + +syscon: syscon@10000000 { + compatible = "arm,realview-pb1176-syscon", "syscon"; + reg = <0x10000000 0x1000>; + + led@8.0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "versatile:0"; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + led@8.1 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x02>; + label = "versatile:1"; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + led@8.2 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x04>; + label = "versatile:2"; + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + led@8.3 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x08>; + label = "versatile:3"; + default-state = "off"; + }; + led@8.4 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x10>; + label = "versatile:4"; + default-state = "off"; + }; + led@8.5 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x20>; + label = "versatile:5"; + default-state = "off"; + }; + led@8.6 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x40>; + label = "versatile:6"; + default-state = "off"; + }; + led@8.7 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x80>; + label = "versatile:7"; + default-state = "off"; + }; +}; diff --git a/Documentation/devicetree/bindings/leds/tca6507.txt b/Documentation/devicetree/bindings/leds/tca6507.txt new file mode 100644 index 000000000..bad910279 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/tca6507.txt @@ -0,0 +1,49 @@ +LEDs connected to tca6507 + +Required properties: +- compatible : should be : "ti,tca6507". +- #address-cells: must be 1 +- #size-cells: must be 0 +- reg: typically 0x45. + +Optional properties: +- gpio-controller: allows lines to be used as output-only GPIOs. +- #gpio-cells: if present, must not be 0. + +Each led is represented as a sub-node of the ti,tca6507 device. + +LED sub-node properties: +- label : (optional) see Documentation/devicetree/bindings/leds/common.txt +- reg : number of LED line (could be from 0 to 6) +- linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt +- compatible: either "led" (the default) or "gpio". + +Examples: + +tca6507@45 { + compatible = "ti,tca6507"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x45>; + + gpio-controller; + #gpio-cells = <2>; + + led0: red-aux@0 { + label = "red:aux"; + reg = <0x0>; + }; + + led1: green-aux@1 { + label = "green:aux"; + reg = <0x5>; + linux,default-trigger = "default-on"; + }; + + wifi-reset@6 { + reg = <0x6>; + compatible = "gpio"; + }; +}; + |