Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 56 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
new file mode 100644
index 000000000..a688520dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
@@ -0,0 +1,56 @@
+* Altera Arria10 Development Kit System Resource Chip
+
+Required parent device properties:
+- compatible		: "altr,a10sr"
+- spi-max-frequency	: Maximum SPI frequency.
+- reg			: The SPI Chip Select address for the Arria10
+			  System Resource chip
+- interrupts		: The interrupt line the device is connected to.
+- interrupt-controller	: Marks the device node as an interrupt controller.
+- #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
+			    The first cell is the IRQ number.
+			    The second cell is the flags, encoded as trigger
+			    masks from ../interrupt-controller/interrupts.txt.
+
+The A10SR consists of these sub-devices:
+
+Device                   Description
+------                   ----------
+a10sr_gpio               GPIO Controller
+a10sr_rst                Reset Controller
+
+Arria10 GPIO
+Required Properties:
+- compatible        : Should be "altr,a10sr-gpio"
+- gpio-controller   : Marks the device node as a GPIO Controller.
+- #gpio-cells       : Should be two.  The first cell is the pin number and
+                      the second cell is used to specify flags.
+                      See ../gpio/gpio.txt for more information.
+
+Arria10 Peripheral PHY Reset
+Required Properties:
+- compatible        : Should be "altr,a10sr-reset"
+- #reset-cells      : Should be one.
+
+Example:
+
+        resource-manager@0 {
+		compatible = "altr,a10sr";
+		reg = <0>;
+		spi-max-frequency = <100000>;
+		interrupt-parent = <&portb>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		a10sr_gpio: gpio-controller {
+			compatible = "altr,a10sr-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		a10sr_rst: reset-controller {
+			compatible = "altr,a10sr-reset";
+			#reset-cells = <1>;
+		};
+	};