diff options
| author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 01:02:30 +0000 |
|---|---|---|
| committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 01:02:30 +0000 |
| commit | 76cb841cb886eef6b3bee341a2266c76578724ad (patch) | |
| tree | f5892e5ba6cc11949952a6ce4ecbe6d516d6ce58 /Documentation/devicetree/bindings/mmc | |
| parent | Initial commit. (diff) | |
| download | linux-76cb841cb886eef6b3bee341a2266c76578724ad.tar.xz linux-76cb841cb886eef6b3bee341a2266c76578724ad.zip | |
Adding upstream version 4.19.249.upstream/4.19.249upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/mmc')
59 files changed, 2891 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt new file mode 100644 index 000000000..13e70409e --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt @@ -0,0 +1,35 @@ +Amlogic SD / eMMC controller for S905/GXBB family SoCs + +The MMC 5.1 compliant host controller on Amlogic provides the +interface for SD, eMMC and SDIO devices. + +This file documents the properties in addition to those available in +the MMC core bindings, documented by mmc.txt. + +Required properties: +- compatible : contains one of: + - "amlogic,meson-gx-mmc" + - "amlogic,meson-gxbb-mmc" + - "amlogic,meson-gxl-mmc" + - "amlogic,meson-gxm-mmc" + - "amlogic,meson-axg-mmc" +- clocks : A list of phandle + clock-specifier pairs for the clocks listed in clock-names. +- clock-names: Should contain the following: + "core" - Main peripheral bus clock + "clkin0" - Parent clock of internal mux + "clkin1" - Other parent clock of internal mux + The driver has an internal mux clock which switches between clkin0 and clkin1 depending on the + clock rate requested by the MMC core. +- resets : phandle of the internal reset line + +Example: + + sd_emmc_a: mmc@70000 { + compatible = "amlogic,meson-gxbb-mmc"; + reg = <0x0 0x70000 0x0 0x2000>; + interrupts = < GIC_SPI 216 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_SD_EMMC_A>, <&xtal>, <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + pinctrl-0 = <&emmc_pins>; + resets = <&reset RESET_SD_EMMC_A>; + }; diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt new file mode 100644 index 000000000..8765c605e --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt @@ -0,0 +1,54 @@ +* Amlogic Meson6, Meson8 and Meson8b SDIO/MMC controller + +The highspeed MMC host controller on Amlogic SoCs provides an interface +for MMC, SD, SDIO and SDHC types of memory cards. + +Supported maximum speeds are the ones of the eMMC standard 4.41 as well +as the speed of SD standard 2.0. + +The hardware provides an internal "mux" which allows up to three slots +to be controlled. Only one slot can be accessed at a time. + +Required properties: + - compatible : must be one of + - "amlogic,meson8-sdio" + - "amlogic,meson8b-sdio" + along with the generic "amlogic,meson-mx-sdio" + - reg : mmc controller base registers + - interrupts : mmc controller interrupt + - #address-cells : must be 1 + - size-cells : must be 0 + - clocks : phandle to clock providers + - clock-names : must contain "core" and "clkin" + +Required child nodes: +A node for each slot provided by the MMC controller is required. +NOTE: due to a driver limitation currently only one slot (= child node) + is supported! + +Required properties on each child node (= slot): + - compatible : must be "mmc-slot" (see mmc.txt within this directory) + - reg : the slot (or "port") ID + +Optional properties on each child node (= slot): + - bus-width : must be 1 or 4 (8-bit bus is not supported) + - for cd and all other additional generic mmc parameters + please refer to mmc.txt within this directory + +Examples: + mmc@c1108c20 { + compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio"; + reg = <0xc1108c20 0x20>; + interrupts = <0 28 1>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; + clock-names = "core", "clkin"; + + slot@1 { + compatible = "mmc-slot"; + reg = <1>; + + bus-width = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt new file mode 100644 index 000000000..f6ddba31c --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt @@ -0,0 +1,77 @@ +Device Tree Bindings for the Arasan SDHCI Controller + + The bindings follow the mmc[1], clock[2], interrupt[3] and phy[4] bindings. + Only deviations are documented here. + + [1] Documentation/devicetree/bindings/mmc/mmc.txt + [2] Documentation/devicetree/bindings/clock/clock-bindings.txt + [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + [4] Documentation/devicetree/bindings/phy/phy-bindings.txt + +Required Properties: + - compatible: Compatibility string. One of: + - "arasan,sdhci-8.9a": generic Arasan SDHCI 8.9a PHY + - "arasan,sdhci-4.9a": generic Arasan SDHCI 4.9a PHY + - "arasan,sdhci-5.1": generic Arasan SDHCI 5.1 PHY + - "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1": rk3399 eMMC PHY + For this device it is strongly suggested to include arasan,soc-ctl-syscon. + - reg: From mmc bindings: Register location and length. + - clocks: From clock bindings: Handles to clock inputs. + - clock-names: From clock bindings: Tuple including "clk_xin" and "clk_ahb" + - interrupts: Interrupt specifier + +Required Properties for "arasan,sdhci-5.1": + - phys: From PHY bindings: Phandle for the Generic PHY for arasan. + - phy-names: MUST be "phy_arasan". + +Optional Properties: + - arasan,soc-ctl-syscon: A phandle to a syscon device (see ../mfd/syscon.txt) + used to access core corecfg registers. Offsets of registers in this + syscon are determined based on the main compatible string for the device. + - clock-output-names: If specified, this will be the name of the card clock + which will be exposed by this device. Required if #clock-cells is + specified. + - #clock-cells: If specified this should be the value <0>. With this property + in place we will export a clock representing the Card Clock. This clock + is expected to be consumed by our PHY. You must also specify + - xlnx,fails-without-test-cd: when present, the controller doesn't work when + the CD line is not connected properly, and the line is not connected + properly. Test mode can be used to force the controller to function. + - xlnx,int-clock-stable-broken: when present, the controller always reports + that the internal clock is stable even when it is not. + +Example: + sdhci@e0100000 { + compatible = "arasan,sdhci-8.9a"; + reg = <0xe0100000 0x1000>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&clkc 21>, <&clkc 32>; + interrupt-parent = <&gic>; + interrupts = <0 24 4>; + } ; + + sdhci@e2800000 { + compatible = "arasan,sdhci-5.1"; + reg = <0xe2800000 0x1000>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&cru 8>, <&cru 18>; + interrupt-parent = <&gic>; + interrupts = <0 24 4>; + phys = <&emmc_phy>; + phy-names = "phy_arasan"; + } ; + + sdhci: sdhci@fe330000 { + compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1"; + reg = <0x0 0xfe330000 0x0 0x10000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>; + clock-names = "clk_xin", "clk_ahb"; + arasan,soc-ctl-syscon = <&grf>; + assigned-clocks = <&cru SCLK_EMMC>; + assigned-clock-rates = <200000000>; + clock-output-names = "emmc_cardclock"; + phys = <&emmc_phy>; + phy-names = "phy_arasan"; + #clock-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt new file mode 100644 index 000000000..07ad02075 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt @@ -0,0 +1,73 @@ +* Atmel High Speed MultiMedia Card Interface + +This controller on atmel products provides an interface for MMC, SD and SDIO +types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the atmel-mci driver. + +1) MCI node + +Required properties: +- compatible: should be "atmel,hsmci" +- #address-cells: should be one. The cell is the slot id. +- #size-cells: should be zero. +- at least one slot node +- clock-names: tuple listing input clock names. + Required elements: "mci_clk" +- clocks: phandles to input clocks. + +The node contains child nodes for each slot that the platform uses + +Example MCI node: + +mmc0: mmc@f0008000 { + compatible = "atmel,hsmci"; + reg = <0xf0008000 0x600>; + interrupts = <12 4>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "mci_clk"; + clocks = <&mci0_clk>; + + [ child node definitions...] +}; + +2) slot nodes + +Required properties: +- reg: should contain the slot id. +- bus-width: number of data lines connected to the controller + +Optional properties: +- cd-gpios: specify GPIOs for card detection +- cd-inverted: invert the value of external card detect gpio line +- wp-gpios: specify GPIOs for write protection + +Example slot node: + +slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 15 0> + cd-inverted; +}; + +Example full MCI node: +mmc0: mmc@f0008000 { + compatible = "atmel,hsmci"; + reg = <0xf0008000 0x600>; + interrupts = <12 4>; + #address-cells = <1>; + #size-cells = <0>; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 15 0> + cd-inverted; + }; + slot@1 { + reg = <1>; + bus-width = <4>; + }; +}; diff --git a/Documentation/devicetree/bindings/mmc/bluefield-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/bluefield-dw-mshc.txt new file mode 100644 index 000000000..b0f0999ea --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/bluefield-dw-mshc.txt @@ -0,0 +1,29 @@ +* Mellanox Bluefield SoC specific extensions to the Synopsys Designware + Mobile Storage Host Controller + +Read synopsys-dw-mshc.txt for more details + +The Synopsys designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents +differences between the core Synopsys dw mshc controller properties described +by synopsys-dw-mshc.txt and the properties used by the Mellanox Bluefield SoC +specific extensions to the Synopsys Designware Mobile Storage Host Controller. + +Required Properties: + +* compatible: should be one of the following. + - "mellanox,bluefield-dw-mshc": for controllers with Mellanox Bluefield SoC + specific extensions. + +Example: + + /* Mellanox Bluefield SoC MMC */ + mmc@6008000 { + compatible = "mellanox,bluefield-dw-mshc"; + reg = <0x6008000 0x400>; + interrupts = <32>; + fifo-depth = <0x100>; + clock-frequency = <24000000>; + bus-width = <8>; + cap-mmc-highspeed; + }; diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt new file mode 100644 index 000000000..d876580ae --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt @@ -0,0 +1,23 @@ +Broadcom BCM2835 SDHOST controller + +This file documents differences between the core properties described +by mmc.txt and the properties that represent the BCM2835 controller. + +Required properties: +- compatible: Should be "brcm,bcm2835-sdhost". +- clocks: The clock feeding the SDHOST controller. + +Optional properties: +- dmas: DMA channel for read and write. + See Documentation/devicetree/bindings/dma/dma.txt for details + +Example: + +sdhost: mmc@7e202000 { + compatible = "brcm,bcm2835-sdhost"; + reg = <0x7e202000 0x100>; + interrupts = <2 24>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + dmas = <&dma 13>; + dma-names = "rx-tx"; +}; diff --git a/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt new file mode 100644 index 000000000..7f5dd83f5 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/brcm,kona-sdhci.txt @@ -0,0 +1,21 @@ +Broadcom BCM281xx SDHCI + +This file documents differences between the core properties in mmc.txt +and the properties present in the bcm281xx SDHCI + +Required properties: +- compatible : Should be "brcm,kona-sdhci" +- DEPRECATED: compatible : Should be "bcm,kona-sdhci" +- clocks: phandle + clock specifier pair of the external clock + +Refer to clocks/clock-bindings.txt for generic clock consumer properties. + +Example: + +sdio2: sdio@3f1a0000 { + compatible = "brcm,kona-sdhci"; + reg = <0x3f1a0000 0x10000>; + clocks = <&sdio3_clk>; + interrupts = <0x0 74 0x4>; +}; + diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt new file mode 100644 index 000000000..733b64a4d --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt @@ -0,0 +1,38 @@ +* BROADCOM BRCMSTB/BMIPS SDHCI Controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-brcmstb driver. + +NOTE: The driver disables all UHS speed modes by default and depends +on Device Tree properties to enable them for SoC/Board combinations +that support them. + +Required properties: +- compatible: should be one of the following + - "brcm,bcm7425-sdhci" + - "brcm,bcm7445-sdhci" + +Refer to clocks/clock-bindings.txt for generic clock consumer properties. + +Example: + + sdhci@f03e0100 { + compatible = "brcm,bcm7425-sdhci"; + reg = <0xf03e0000 0x100>; + interrupts = <0x0 0x26 0x0>; + sdhci,auto-cmd12; + clocks = <&sw_sdio>; + sd-uhs-sdr50; + sd-uhs-ddr50; + }; + + sdhci@f03e0300 { + non-removable; + bus-width = <0x8>; + compatible = "brcm,bcm7425-sdhci"; + reg = <0xf03e0200 0x100>; + interrupts = <0x0 0x27 0x0>; + sdhci,auto-cmd12; + clocks = <sw_sdio>; + mmc-hs200-1_8v; + }; diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt new file mode 100644 index 000000000..fa90d253d --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-iproc.txt @@ -0,0 +1,35 @@ +Broadcom IPROC SDHCI controller + +This file documents differences between the core properties described +by mmc.txt and the properties that represent the IPROC SDHCI controller. + +Required properties: +- compatible : Should be one of the following + "brcm,bcm2835-sdhci" + "brcm,sdhci-iproc-cygnus" + "brcm,sdhci-iproc" + +Use brcm2835-sdhci for Rasperry PI. + +Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers +restricted to 32bit host accesses to SDHCI registers. + +Use sdhci-iproc for Broadcom SDHCI Controllers that allow standard +8, 16, 32-bit host access to SDHCI register. + +- clocks : The clock feeding the SDHCI controller. + +Optional properties: + - sdhci,auto-cmd12: specifies that controller should use auto CMD12. + +Example: + +sdhci0: sdhci@18041000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x18041000 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>; + bus-width = <4>; + sdhci,auto-cmd12; + no-1-8-v; +}; diff --git a/Documentation/devicetree/bindings/mmc/cavium-mmc.txt b/Documentation/devicetree/bindings/mmc/cavium-mmc.txt new file mode 100644 index 000000000..1433e6201 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/cavium-mmc.txt @@ -0,0 +1,57 @@ +* Cavium Octeon & ThunderX MMC controller + +The highspeed MMC host controller on Caviums SoCs provides an interface +for MMC and SD types of memory cards. + +Supported maximum speeds are the ones of the eMMC standard 4.41 as well +as the speed of SD standard 4.0. Only 3.3 Volt is supported. + +Required properties: + - compatible : should be one of: + cavium,octeon-6130-mmc + cavium,octeon-7890-mmc + cavium,thunder-8190-mmc + cavium,thunder-8390-mmc + mmc-slot + - reg : mmc controller base registers + - clocks : phandle + +Optional properties: + - for cd, bus-width and additional generic mmc parameters + please refer to mmc.txt within this directory + - cavium,cmd-clk-skew : number of coprocessor clocks before sampling command + - cavium,dat-clk-skew : number of coprocessor clocks before sampling data + +Deprecated properties: +- spi-max-frequency : use max-frequency instead +- cavium,bus-max-width : use bus-width instead +- power-gpios : use vmmc-supply instead +- cavium,octeon-6130-mmc-slot : use mmc-slot instead + +Examples: + mmc_1_4: mmc@1,4 { + compatible = "cavium,thunder-8390-mmc"; + reg = <0x0c00 0 0 0 0>; /* DEVFN = 0x0c (1:4) */ + #address-cells = <1>; + #size-cells = <0>; + clocks = <&sclk>; + + mmc-slot@0 { + compatible = "mmc-slot"; + reg = <0>; + vmmc-supply = <&mmc_supply_3v3>; + max-frequency = <42000000>; + bus-width = <4>; + cap-sd-highspeed; + }; + + mmc-slot@1 { + compatible = "mmc-slot"; + reg = <1>; + vmmc-supply = <&mmc_supply_3v3>; + max-frequency = <42000000>; + bus-width = <8>; + cap-mmc-highspeed; + non-removable; + }; + }; diff --git a/Documentation/devicetree/bindings/mmc/davinci_mmc.txt b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt new file mode 100644 index 000000000..516fb0143 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt @@ -0,0 +1,32 @@ +* TI Highspeed MMC host controller for DaVinci + +The Highspeed MMC Host Controller on TI DaVinci family +provides an interface for MMC, SD and SDIO types of memory cards. + +This file documents the properties used by the davinci_mmc driver. + +Required properties: +- compatible: + Should be "ti,da830-mmc": for da830, da850, dm365 + Should be "ti,dm355-mmc": for dm355, dm644x + +Optional properties: +- bus-width: Number of data lines, can be <1>, <4>, or <8>, default <1> +- max-frequency: Maximum operating clock frequency, default 25MHz. +- dmas: List of DMA specifiers with the controller specific format + as described in the generic DMA client binding. A tx and rx + specifier is required. +- dma-names: RX and TX DMA request names. These strings correspond + 1:1 with the DMA specifiers listed in dmas. + +Example: +mmc0: mmc@1c40000 { + compatible = "ti,da830-mmc", + reg = <0x40000 0x1000>; + interrupts = <16>; + bus-width = <4>; + max-frequency = <50000000>; + dmas = <&edma 16 + &edma 17>; + dma-names = "rx", "tx"; +}; diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt new file mode 100644 index 000000000..0419a63f7 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -0,0 +1,92 @@ +* Samsung Exynos specific extensions to the Synopsys Designware Mobile + Storage Host Controller + +The Synopsys designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents +differences between the core Synopsys dw mshc controller properties described +by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific +extensions to the Synopsys Designware Mobile Storage Host Controller. + +Required Properties: + +* compatible: should be + - "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210 + specific extensions. + - "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412 + specific extensions. + - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250 + specific extensions. + - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420 + specific extensions. + - "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7 + specific extensions. + - "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7 + specific extensions having an SMU. + +* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface + unit (ciu) clock. This property is applicable only for Exynos5 SoC's and + ignored for Exynos4 SoC's. The valid range of divider value is 0 to 7. + +* samsung,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value + in transmit mode and CIU clock phase shift value in receive mode for single + data rate mode operation. Refer notes below for the order of the cells and the + valid values. + +* samsung,dw-mshc-ddr-timing: Specifies the value of CUI clock phase shift value + in transmit mode and CIU clock phase shift value in receive mode for double + data rate mode operation. Refer notes below for the order of the cells and the + valid values. +* samsung,dw-mshc-hs400-timing: Specifies the value of CIU TX and RX clock phase + shift value for hs400 mode operation. + + Notes for the sdr-timing and ddr-timing values: + + The order of the cells should be + - First Cell: CIU clock phase shift value for tx mode. + - Second Cell: CIU clock phase shift value for rx mode. + + Valid values for SDR and DDR CIU clock timing for Exynos5250: + - valid value for tx phase shift and rx phase shift is 0 to 7. + - when CIU clock divider value is set to 3, all possible 8 phase shift + values can be used. + - if CIU clock divider value is 0 (that is divide by 1), both tx and rx + phase shift clocks should be 0. + +* samsung,read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode + (Latency value for delay line in Read path) + +Required properties for a slot (Deprecated - Recommend to use one slot per host): + +* gpios: specifies a list of gpios used for command, clock and data bus. The + first gpio is the command line and the second gpio is the clock line. The + rest of the gpios (depending on the bus-width property) are the data lines in + no particular order. The format of the gpio specifier depends on the gpio + controller. +(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt) + +Example: + + The MSHC controller node can be split into two portions, SoC specific and + board specific portions as listed below. + + dwmmc0@12200000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc0@12200000 { + cap-mmc-highspeed; + cap-sd-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; + bus-width = <8>; + }; diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt new file mode 100644 index 000000000..99c5cf850 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt @@ -0,0 +1,51 @@ +* Freescale Enhanced Secure Digital Host Controller (eSDHC) + +The Enhanced Secure Digital Host Controller provides an interface +for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the sdhci-esdhc driver. + +Required properties: + - compatible : should be "fsl,esdhc", or "fsl,<chip>-esdhc". + Possible compatibles for PowerPC: + "fsl,mpc8536-esdhc" + "fsl,mpc8378-esdhc" + "fsl,p2020-esdhc" + "fsl,p4080-esdhc" + "fsl,t1040-esdhc" + "fsl,t4240-esdhc" + Possible compatibles for ARM: + "fsl,ls1012a-esdhc" + "fsl,ls1088a-esdhc" + "fsl,ls1043a-esdhc" + "fsl,ls1046a-esdhc" + "fsl,ls2080a-esdhc" + - clock-frequency : specifies eSDHC base clock frequency. + +Optional properties: + - sdhci,wp-inverted : specifies that eSDHC controller reports + inverted write-protect state; New devices should use the generic + "wp-inverted" property. + - sdhci,1-bit-only : specifies that a controller can only handle + 1-bit data transfers. New devices should use the generic + "bus-width = <1>" property. + - sdhci,auto-cmd12: specifies that a controller can only handle auto + CMD12. + - voltage-ranges : two cells are required, first cell specifies minimum + slot voltage (mV), second cell specifies maximum slot voltage (mV). + Several ranges could be specified. + - little-endian : If the host controller is little-endian mode, specify + this property. The default endian mode is big-endian. + +Example: + +sdhci@2e000 { + compatible = "fsl,mpc8378-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + voltage-ranges = <3300 3300>; +}; diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt new file mode 100644 index 000000000..3e29050ec --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -0,0 +1,54 @@ +* Freescale Enhanced Secure Digital Host Controller (eSDHC) for i.MX + +The Enhanced Secure Digital Host Controller on Freescale i.MX family +provides an interface for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the sdhci-esdhc-imx driver. + +Required properties: +- compatible : Should be "fsl,<chip>-esdhc", the supported chips include + "fsl,imx25-esdhc" + "fsl,imx35-esdhc" + "fsl,imx51-esdhc" + "fsl,imx53-esdhc" + "fsl,imx6q-usdhc" + "fsl,imx6sl-usdhc" + "fsl,imx6sx-usdhc" + "fsl,imx7d-usdhc" + +Optional properties: +- fsl,wp-controller : Indicate to use controller internal write protection +- fsl,delay-line : Specify the number of delay cells for override mode. + This is used to set the clock delay for DLL(Delay Line) on override mode + to select a proper data sampling window in case the clock quality is not good + due to signal path is too long on the board. Please refer to eSDHC/uSDHC + chapter, DLL (Delay Line) section in RM for details. +- voltage-ranges : Specify the voltage range in case there are software + transparent level shifters on the outputs of the controller. Two cells are + required, first cell specifies minimum slot voltage (mV), second cell + specifies maximum slot voltage (mV). Several ranges could be specified. +- fsl,tuning-start-tap: Specify the start dealy cell point when send first CMD19 + in tuning procedure. +- fsl,tuning-step: Specify the increasing delay cell steps in tuning procedure. + The uSDHC use one delay cell as default increasing step to do tuning process. + This property allows user to change the tuning step to more than one delay + cells which is useful for some special boards or cards when the default + tuning step can't find the proper delay window within limited tuning retries. + +Examples: + +esdhc@70004000 { + compatible = "fsl,imx51-esdhc"; + reg = <0x70004000 0x4000>; + interrupts = <1>; + fsl,wp-controller; +}; + +esdhc@70008000 { + compatible = "fsl,imx51-esdhc"; + reg = <0x70008000 0x4000>; + interrupts = <2>; + cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */ + wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */ +}; diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt new file mode 100644 index 000000000..184ccffe2 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.txt @@ -0,0 +1,23 @@ +* Freescale Secure Digital Host Controller for i.MX2/3 series + +This file documents differences to the properties defined in mmc.txt. + +Required properties: +- compatible : Should be "fsl,<chip>-mmc", chip can be imx21 or imx31 + +Optional properties: +- dmas: One DMA phandle with arguments as defined by the devicetree bindings + of the used DMA controller. +- dma-names: Has to be "rx-tx". + +Example: + +sdhci1: sdhci@10014000 { + compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; + reg = <0x10014000 0x1000>; + interrupts = <11>; + dmas = <&dma 7>; + dma-names = "rx-tx"; + bus-width = <4>; + cd-gpios = <&gpio3 29>; +}; diff --git a/Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt new file mode 100644 index 000000000..a0693b714 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/hi3798cv200-dw-mshc.txt @@ -0,0 +1,40 @@ +* Hisilicon Hi3798CV200 specific extensions to the Synopsys Designware Mobile + Storage Host Controller + +Read synopsys-dw-mshc.txt for more details + +The Synopsys designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents +differences between the core Synopsys dw mshc controller properties described +by synopsys-dw-mshc.txt and the properties used by the Hisilicon Hi3798CV200 +specific extensions to the Synopsys Designware Mobile Storage Host Controller. + +Required Properties: +- compatible: Should contain "hisilicon,hi3798cv200-dw-mshc". +- clocks: A list of phandle + clock-specifier pairs for the clocks listed + in clock-names. +- clock-names: Should contain the following: + "ciu" - The ciu clock described in synopsys-dw-mshc.txt. + "biu" - The biu clock described in synopsys-dw-mshc.txt. + "ciu-sample" - Hi3798CV200 extended phase clock for ciu sampling. + "ciu-drive" - Hi3798CV200 extended phase clock for ciu driving. + +Example: + + emmc: mmc@9830000 { + compatible = "hisilicon,hi3798cv200-dw-mshc"; + reg = <0x9830000 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HISTB_MMC_CIU_CLK>, + <&crg HISTB_MMC_BIU_CLK>, + <&crg HISTB_MMC_SAMPLE_CLK>, + <&crg HISTB_MMC_DRV_CLK>; + clock-names = "ciu", "biu", "ciu-sample", "ciu-drive"; + fifo-depth = <256>; + clock-frequency = <200000000>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + bus-width = <8>; + }; diff --git a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt new file mode 100644 index 000000000..c54e577ee --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt @@ -0,0 +1,28 @@ +* Imagination specific extensions to the Synopsys Designware Mobile Storage + Host Controller + +The Synopsys designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents +differences between the core Synopsys dw mshc controller properties described +by synopsys-dw-mshc.txt and the properties used by the Imagination specific +extensions to the Synopsys Designware Mobile Storage Host Controller. + +Required Properties: + +* compatible: should be + - "img,pistachio-dw-mshc": for Pistachio SoCs + +Example: + + mmc@18142000 { + compatible = "img,pistachio-dw-mshc"; + reg = <0x18142000 0x400>; + interrupts = <GIC_SHARED 39 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&system_clk>, <&sdhost_clk>; + clock-names = "biu", "ciu"; + + fifo-depth = <0x20>; + bus-width = <4>; + disable-wp; + }; diff --git a/Documentation/devicetree/bindings/mmc/jz4740.txt b/Documentation/devicetree/bindings/mmc/jz4740.txt new file mode 100644 index 000000000..7cd8c432d --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/jz4740.txt @@ -0,0 +1,38 @@ +* Ingenic JZ47xx MMC controllers + +This file documents the device tree properties used for the MMC controller in +Ingenic JZ4740/JZ4780 SoCs. These are in addition to the core MMC properties +described in mmc.txt. + +Required properties: +- compatible: Should be one of the following: + - "ingenic,jz4740-mmc" for the JZ4740 + - "ingenic,jz4780-mmc" for the JZ4780 +- reg: Should contain the MMC controller registers location and length. +- interrupts: Should contain the interrupt specifier of the MMC controller. +- clocks: Clock for the MMC controller. + +Optional properties: +- dmas: List of DMA specifiers with the controller specific format + as described in the generic DMA client binding. A tx and rx + specifier is required. +- dma-names: RX and TX DMA request names. + Should be "rx" and "tx", in that order. + +For additional details on DMA client bindings see ../dma/dma.txt. + +Example: + +mmc0: mmc@13450000 { + compatible = "ingenic,jz4780-mmc"; + reg = <0x13450000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <37>; + + clocks = <&cgu JZ4780_CLK_MSC0>; + clock-names = "mmc"; + + dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>, <&dma JZ4780_DMA_MSC0_TX 0xffffffff>; + dma-names = "rx", "tx"; +}; diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt new file mode 100644 index 000000000..07242d141 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt @@ -0,0 +1,71 @@ +* Hisilicon specific extensions to the Synopsys Designware Mobile + Storage Host Controller + +Read synopsys-dw-mshc.txt for more details + +The Synopsys designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents +differences between the core Synopsys dw mshc controller properties described +by synopsys-dw-mshc.txt and the properties used by the Hisilicon specific +extensions to the Synopsys Designware Mobile Storage Host Controller. + +Required Properties: + +* compatible: should be one of the following. + - "hisilicon,hi3660-dw-mshc": for controllers with hi3660 specific extensions. + - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extensions. + - "hisilicon,hi6220-dw-mshc": for controllers with hi6220 specific extensions. + +Optional Properties: +- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral. + +Example: + + /* for Hi3620 */ + + /* SoC portion */ + dwmmc_0: dwmmc0@fcd03000 { + compatible = "hisilicon,hi4511-dw-mshc"; + reg = <0xfcd03000 0x1000>; + interrupts = <0 16 4>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mmc_clock HI3620_SD_CIUCLK>, <&clock HI3620_DDRC_PER_CLK>; + clock-names = "ciu", "biu"; + }; + + /* Board portion */ + dwmmc0@fcd03000 { + vmmc-supply = <&ldo12>; + fifo-depth = <0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>; + bus-width = <4>; + disable-wp; + cd-gpios = <&gpio10 3 0>; + cap-mmc-highspeed; + cap-sd-highspeed; + }; + + /* for Hi6220 */ + + dwmmc_1: dwmmc1@f723e000 { + compatible = "hisilicon,hi6220-dw-mshc"; + bus-width = <0x4>; + disable-wp; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + card-detect-delay = <200>; + hisilicon,peripheral-syscon = <&ao_ctrl>; + reg = <0x0 0xf723e000 0x0 0x1000>; + interrupts = <0x0 0x49 0x4>; + clocks = <&clock_sys HI6220_MMC1_CIUCLK>, <&clock_sys HI6220_MMC1_CLK>; + clock-names = "ciu", "biu"; + cd-gpios = <&gpio1 0 1>; + pinctrl-names = "default", "idle"; + pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>; + pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>; + vqmmc-supply = <&ldo7>; + vmmc-supply = <&ldo10>; + }; diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt new file mode 100644 index 000000000..ed1456f5c --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt @@ -0,0 +1,172 @@ +Marvell Xenon SDHCI Controller device tree bindings +This file documents differences between the core mmc properties +described by mmc.txt and the properties used by the Xenon implementation. + +Multiple SDHCs might be put into a single Xenon IP, to save size and cost. +Each SDHC is independent and owns independent resources, such as register sets, +clock and PHY. +Each SDHC should have an independent device tree node. + +Required Properties: +- compatible: should be one of the following + - "marvell,armada-3700-sdhci": For controllers on Armada-3700 SoC. + Must provide a second register area and marvell,pad-type. + - "marvell,armada-ap806-sdhci": For controllers on Armada AP806. + - "marvell,armada-cp110-sdhci": For controllers on Armada CP110. + +- clocks: + Array of clocks required for SDHC. + Require at least input clock for Xenon IP core. For Armada AP806 and + CP110, the AXI clock is also mandatory. + +- clock-names: + Array of names corresponding to clocks property. + The input clock for Xenon IP core should be named as "core". + The input clock for the AXI bus must be named as "axi". + +- reg: + * For "marvell,armada-3700-sdhci", two register areas. + The first one for Xenon IP register. The second one for the Armada 3700 SoC + PHY PAD Voltage Control register. + Please follow the examples with compatible "marvell,armada-3700-sdhci" + in below. + Please also check property marvell,pad-type in below. + + * For other compatible strings, one register area for Xenon IP. + +Optional Properties: +- marvell,xenon-sdhc-id: + Indicate the corresponding bit index of current SDHC in + SDHC System Operation Control Register Bit[7:0]. + Set/clear the corresponding bit to enable/disable current SDHC. + If Xenon IP contains only one SDHC, this property is optional. + +- marvell,xenon-phy-type: + Xenon support multiple types of PHYs. + To select eMMC 5.1 PHY, set: + marvell,xenon-phy-type = "emmc 5.1 phy" + eMMC 5.1 PHY is the default choice if this property is not provided. + To select eMMC 5.0 PHY, set: + marvell,xenon-phy-type = "emmc 5.0 phy" + + All those types of PHYs can support eMMC, SD and SDIO. + Please note that this property only presents the type of PHY. + It doesn't stand for the entire SDHC type or property. + For example, "emmc 5.1 phy" doesn't mean that this Xenon SDHC only + supports eMMC 5.1. + +- marvell,xenon-phy-znr: + Set PHY ZNR value. + Only available for eMMC PHY. + Valid range = [0:0x1F]. + ZNR is set as 0xF by default if this property is not provided. + +- marvell,xenon-phy-zpr: + Set PHY ZPR value. + Only available for eMMC PHY. + Valid range = [0:0x1F]. + ZPR is set as 0xF by default if this property is not provided. + +- marvell,xenon-phy-nr-success-tun: + Set the number of required consecutive successful sampling points + used to identify a valid sampling window, in tuning process. + Valid range = [1:7]. + Set as 0x4 by default if this property is not provided. + +- marvell,xenon-phy-tun-step-divider: + Set the divider for calculating TUN_STEP. + Set as 64 by default if this property is not provided. + +- marvell,xenon-phy-slow-mode: + If this property is selected, transfers will bypass PHY. + Only available when bus frequency lower than 55MHz in SDR mode. + Disabled by default. Please only try this property if timing issues + always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25, + SD Default Speed and HS mode and eMMC legacy speed mode. + +- marvell,xenon-tun-count: + Xenon SDHC SoC usually doesn't provide re-tuning counter in + Capabilities Register 3 Bit[11:8]. + This property provides the re-tuning counter. + If this property is not set, default re-tuning counter will + be set as 0x9 in driver. + +- marvell,pad-type: + Type of Armada 3700 SoC PHY PAD Voltage Controller register. + Only valid when "marvell,armada-3700-sdhci" is selected. + Two types: "sd" and "fixed-1-8v". + If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning and is + switched to 1.8V when later in higher speed mode. + If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for eMMC. + Please follow the examples with compatible "marvell,armada-3700-sdhci" + in below. + +Example: +- For eMMC: + + sdhci@aa0000 { + compatible = "marvell,armada-ap806-sdhci"; + reg = <0xaa0000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH> + clocks = <&emmc_clk>,<&axi_clk>; + clock-names = "core", "axi"; + bus-width = <4>; + marvell,xenon-phy-slow-mode; + marvell,xenon-tun-count = <11>; + non-removable; + no-sd; + no-sdio; + + /* Vmmc and Vqmmc are both fixed */ + }; + +- For SD/SDIO: + + sdhci@ab0000 { + compatible = "marvell,armada-cp110-sdhci"; + reg = <0xab0000 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH> + vqmmc-supply = <&sd_vqmmc_regulator>; + vmmc-supply = <&sd_vmmc_regulator>; + clocks = <&sdclk>, <&axi_clk>; + clock-names = "core", "axi"; + bus-width = <4>; + marvell,xenon-tun-count = <9>; + }; + +- For eMMC with compatible "marvell,armada-3700-sdhci": + + sdhci@aa0000 { + compatible = "marvell,armada-3700-sdhci"; + reg = <0xaa0000 0x1000>, + <phy_addr 0x4>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH> + clocks = <&emmcclk>; + clock-names = "core"; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + non-removable; + no-sd; + no-sdio; + + /* Vmmc and Vqmmc are both fixed */ + + marvell,pad-type = "fixed-1-8v"; + }; + +- For SD/SDIO with compatible "marvell,armada-3700-sdhci": + + sdhci@ab0000 { + compatible = "marvell,armada-3700-sdhci"; + reg = <0xab0000 0x1000>, + <phy_addr 0x4>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH> + vqmmc-supply = <&sd_regulator>; + /* Vmmc is fixed */ + clocks = <&sdclk>; + clock-names = "core"; + bus-width = <4>; + + marvell,pad-type = "sd"; + }; diff --git a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt new file mode 100644 index 000000000..f064528ef --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt @@ -0,0 +1,29 @@ +* Microchip PIC32 SDHCI Controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-pic32 driver. + +Required properties: +- compatible: Should be "microchip,pic32mzda-sdhci" +- interrupts: Should contain interrupt +- clock-names: Should be "base_clk", "sys_clk". + See: Documentation/devicetree/bindings/resource-names.txt +- clocks: Phandle to the clock. + See: Documentation/devicetree/bindings/clock/clock-bindings.txt +- pinctrl-names: A pinctrl state names "default" must be defined. +- pinctrl-0: Phandle referencing pin configuration of the SDHCI controller. + See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + +Example: + + sdhci@1f8ec000 { + compatible = "microchip,pic32mzda-sdhci"; + reg = <0x1f8ec000 0x100>; + interrupts = <191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rootclk REF4CLK>, <&rootclk PB5CLK>; + clock-names = "base_clk", "sys_clk"; + bus-width = <4>; + cap-sd-highspeed; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhc1>; + }; diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.txt b/Documentation/devicetree/bindings/mmc/mmc-card.txt new file mode 100644 index 000000000..8d2d71758 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc-card.txt @@ -0,0 +1,30 @@ +mmc-card / eMMC bindings +------------------------ + +This documents describes the devicetree bindings for a mmc-host controller +child node describing a mmc-card / an eMMC, see "Use of Function subnodes" +in mmc.txt + +Required properties: +-compatible : Must be "mmc-card" +-reg : Must be <0> + +Optional properties: +-broken-hpi : Use this to indicate that the mmc-card has a broken hpi + implementation, and that hpi should not be used + +Example: + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + + mmccard: mmccard@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt new file mode 100644 index 000000000..3d965d57e --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt @@ -0,0 +1,25 @@ +* The simple eMMC hardware reset provider + +The purpose of this driver is to perform standard eMMC hw reset +procedure, as described by Jedec 4.4 specification. This procedure is +performed just after MMC core enabled power to the given mmc host (to +fix possible issues if bootloader has left eMMC card in initialized or +unknown state), and before performing complete system reboot (also in +case of emergency reboot call). The latter is needed on boards, which +doesn't have hardware reset logic connected to emmc card and (limited or +broken) ROM bootloaders are unable to read second stage from the emmc +card if the card is left in unknown or already initialized state. + +Required properties: +- compatible : contains "mmc-pwrseq-emmc". +- reset-gpios : contains a GPIO specifier. The reset GPIO is asserted + and then deasserted to perform eMMC card reset. To perform + reset procedure as described in Jedec 4.4 specification, the + gpio line should be defined as GPIO_ACTIVE_LOW. + +Example: + + sdhci0_pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + } diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt new file mode 100644 index 000000000..22e9340e4 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt @@ -0,0 +1,16 @@ +* Marvell SD8787 power sequence provider + +Required properties: +- compatible: must be "mmc-pwrseq-sd8787". +- powerdown-gpios: contains a power down GPIO specifier with the + default active state +- reset-gpios: contains a reset GPIO specifier with the default + active state + +Example: + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-sd8787"; + powerdown-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; + reset-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>; + } diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt new file mode 100644 index 000000000..9029b45b8 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt @@ -0,0 +1,31 @@ +* The simple MMC power sequence provider + +The purpose of the simple MMC power sequence provider is to supports a set of +common properties between various SOC designs. It thus enables us to use the +same provider for several SOC designs. + +Required properties: +- compatible : contains "mmc-pwrseq-simple". + +Optional properties: +- reset-gpios : contains a list of GPIO specifiers. The reset GPIOs are asserted + at initialization and prior we start the power up procedure of the card. + They will be de-asserted right after the power has been provided to the + card. +- clocks : Must contain an entry for the entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entry: + "ext_clock" (External clock provided to the card). +- post-power-on-delay-ms : Delay in ms after powering the card and + de-asserting the reset-gpios (if any) +- power-off-delay-us : Delay in us after asserting the reset-gpios (if any) + during power off of the card. + +Example: + + sdhci0_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + clocks = <&clk_32768_ck>; + clock-names = "ext_clock"; + } diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt new file mode 100644 index 000000000..75486cca8 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt @@ -0,0 +1,29 @@ +MMC/SD/SDIO slot directly connected to a SPI bus + +This file documents differences between the core properties described +by mmc.txt and the properties used by the mmc_spi driver. + +Required properties: +- spi-max-frequency : maximum frequency for this device (Hz). +- voltage-ranges : two cells are required, first cell specifies minimum + slot voltage (mV), second cell specifies maximum slot voltage (mV). + Several ranges could be specified. + +Optional properties: +- gpios : may specify GPIOs in this order: Card-Detect GPIO, + Write-Protect GPIO. Note that this does not follow the + binding from mmc.txt, for historical reasons. + +Example: + + mmc-slot@0 { + compatible = "fsl,mpc8323rdb-mmc-slot", + "mmc-spi-slot"; + reg = <0>; + gpios = <&qe_pio_d 14 1 + &qe_pio_d 15 0>; + voltage-ranges = <3300 3300>; + spi-max-frequency = <50000000>; + interrupts = <42>; + interrupt-parent = <&PIC>; + }; diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt new file mode 100644 index 000000000..c269dbe38 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -0,0 +1,177 @@ +These properties are common to multiple MMC host controllers. Any host +that requires the respective functionality should implement them using +these definitions. + +Interpreted by the OF core: +- reg: Registers location and length. +- interrupts: Interrupts used by the MMC controller. + +Card detection: +If no property below is supplied, host native card detect is used. +Only one of the properties in this section should be supplied: + - broken-cd: There is no card detection available; polling must be used. + - cd-gpios: Specify GPIOs for card detection, see gpio binding + - non-removable: non-removable slot (like eMMC); assume always present. + +Optional properties: +- bus-width: Number of data lines, can be <1>, <4>, or <8>. The default + will be <1> if the property is absent. +- wp-gpios: Specify GPIOs for write protection, see gpio binding +- cd-inverted: when present, polarity on the CD line is inverted. See the note + below for the case, when a GPIO is used for the CD line +- cd-debounce-delay-ms: Set delay time before detecting card after card insert interrupt. + It's only valid when cd-gpios is present. +- wp-inverted: when present, polarity on the WP line is inverted. See the note + below for the case, when a GPIO is used for the WP line +- disable-wp: When set no physical WP line is present. This property should + only be specified when the controller has a dedicated write-protect + detection logic. If a GPIO is always used for the write-protect detection + logic it is sufficient to not specify wp-gpios property in the absence of a WP + line. +- max-frequency: maximum operating clock frequency +- no-1-8-v: when present, denotes that 1.8v card voltage is not supported on + this system, even if the controller claims it is. +- cap-sd-highspeed: SD high-speed timing is supported +- cap-mmc-highspeed: MMC high-speed timing is supported +- sd-uhs-sdr12: SD UHS SDR12 speed is supported +- sd-uhs-sdr25: SD UHS SDR25 speed is supported +- sd-uhs-sdr50: SD UHS SDR50 speed is supported +- sd-uhs-sdr104: SD UHS SDR104 speed is supported +- sd-uhs-ddr50: SD UHS DDR50 speed is supported +- cap-power-off-card: powering off the card is safe +- cap-mmc-hw-reset: eMMC hardware reset is supported +- cap-sdio-irq: enable SDIO IRQ signalling on this interface +- full-pwr-cycle: full power cycle of the card is supported +- mmc-ddr-3_3v: eMMC high-speed DDR mode(3.3V I/O) is supported +- mmc-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported +- mmc-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported +- mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported +- mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported +- mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported +- mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported +- mmc-hs400-enhanced-strobe: eMMC HS400 enhanced strobe mode is supported +- dsr: Value the card's (optional) Driver Stage Register (DSR) should be + programmed with. Valid range: [0 .. 0xffff]. +- no-sdio: controller is limited to send sdio cmd during initialization +- no-sd: controller is limited to send sd cmd during initialization +- no-mmc: controller is limited to send mmc cmd during initialization +- fixed-emmc-driver-type: for non-removable eMMC, enforce this driver type. + The value <n> is the driver type as specified in the eMMC specification + (table 206 in spec version 5.1). +- post-power-on-delay-ms : It was invented for MMC pwrseq-simple which could + be referred to mmc-pwrseq-simple.txt. But now it's reused as a tunable delay + waiting for I/O signalling and card power supply to be stable, regardless of + whether pwrseq-simple is used. Default to 10ms if no available. +- supports-cqe : The presence of this property indicates that the corresponding + MMC host controller supports HW command queue feature. +- disable-cqe-dcmd: This property indicates that the MMC controller's command + queue engine (CQE) does not support direct commands (DCMDs). + +*NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line +polarity properties, we have to fix the meaning of the "normal" and "inverted" +line levels. We choose to follow the SDHCI standard, which specifies both those +lines as "active low." Therefore, using the "cd-inverted" property means, that +the CD line is active high, i.e. it is high, when a card is inserted. Similar +logic applies to the "wp-inverted" property. + +CD and WP lines can be implemented on the hardware in one of two ways: as GPIOs, +specified in cd-gpios and wp-gpios properties, or as dedicated pins. Polarity of +dedicated pins can be specified, using *-inverted properties. GPIO polarity can +also be specified using the GPIO_ACTIVE_LOW flag. This creates an ambiguity +in the latter case. We choose to use the XOR logic for GPIO CD and WP lines. +This means, the two properties are "superimposed," for example leaving the +GPIO_ACTIVE_LOW flag clear and specifying the respective *-inverted property +property results in a double-inversion and actually means the "normal" line +polarity is in effect. + +Optional SDIO properties: +- keep-power-in-suspend: Preserves card power during a suspend/resume cycle +- wakeup-source: Enables wake up of host system on SDIO IRQ assertion + (Legacy property supported: "enable-sdio-wakeup") + +MMC power +--------- + +Controllers may implement power control from both the connected cards and +the IO signaling (for example to change to high-speed 1.8V signalling). If +the system supports this, then the following two properties should point +to valid regulator nodes: + +- vqmmc-supply: supply node for IO line power +- vmmc-supply: supply node for card's power + + +MMC power sequences: +-------------------- + +System on chip designs may specify a specific MMC power sequence. To +successfully detect an (e)MMC/SD/SDIO card, that power sequence must be +maintained while initializing the card. + +Optional property: +- mmc-pwrseq: phandle to the MMC power sequence node. See "mmc-pwrseq-*" + for documentation of MMC power sequence bindings. + + +Use of Function subnodes +------------------------ + +On embedded systems the cards connected to a host may need additional +properties. These can be specified in subnodes to the host controller node. +The subnodes are identified by the standard 'reg' property. +Which information exactly can be specified depends on the bindings for the +SDIO function driver for the subnode, as specified by the compatible string. + +Required host node properties when using function subnodes: +- #address-cells: should be one. The cell is the slot id. +- #size-cells: should be zero. + +Required function subnode properties: +- reg: Must contain the SDIO function number of the function this subnode + describes. A value of 0 denotes the memory SD function, values from + 1 to 7 denote the SDIO functions. + +Optional function subnode properties: +- compatible: name of SDIO function following generic names recommended practice + + +Examples +-------- + +Basic example: + +sdhci@ab000000 { + compatible = "sdhci"; + reg = <0xab000000 0x200>; + interrupts = <23>; + bus-width = <4>; + cd-gpios = <&gpio 69 0>; + cd-inverted; + wp-gpios = <&gpio 70 0>; + max-frequency = <50000000>; + keep-power-in-suspend; + wakeup-source; + mmc-pwrseq = <&sdhci0_pwrseq> +} + +Example with sdio function subnode: + +mmc3: mmc@1c12000 { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&sdhci0_pwrseq> + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm43xx-fmac"; + interrupt-parent = <&pio>; + interrupts = <10 8>; /* PH10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt new file mode 100644 index 000000000..03796cf2d --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmci.txt @@ -0,0 +1,61 @@ +* ARM PrimeCell MultiMedia Card Interface (MMCI) PL180/1 + +The ARM PrimeCell MMCI PL180 and PL181 provides an interface for +reading and writing to MultiMedia and SD cards alike. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the mmci driver. Using "st" as +the prefix for a property, indicates support by the ST Micro variant. + +Required properties: +- compatible : contains "arm,pl18x", "arm,primecell". +- vmmc-supply : phandle to the regulator device tree node, mentioned + as the VCC/VDD supply in the eMMC/SD specs. + +Optional properties: +- arm,primecell-periphid : contains the PrimeCell Peripheral ID, it overrides + the ID provided by the HW +- vqmmc-supply : phandle to the regulator device tree node, mentioned + as the VCCQ/VDD_IO supply in the eMMC/SD specs. +- st,sig-dir-dat0 : bus signal direction pin used for DAT[0]. +- st,sig-dir-dat2 : bus signal direction pin used for DAT[2]. +- st,sig-dir-dat31 : bus signal direction pin used for DAT[3] and DAT[1]. +- st,sig-dir-dat74 : bus signal direction pin used for DAT[4] to DAT[7]. +- st,sig-dir-cmd : cmd signal direction pin used for CMD. +- st,sig-pin-fbclk : feedback clock signal pin used. + +Deprecated properties: +- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable. +- mmc-cap-sd-highspeed : indicates whether SD is high speed capable. + +Example: + +sdi0_per1@80126000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80126000 0x1000>; + interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; + + dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */ + <&dma 29 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + + clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>; + clock-names = "sdi", "apb_pclk"; + + max-frequency = <100000000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + cd-gpios = <&gpio2 31 0x4>; // 95 + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-cmd; + st,sig-pin-fbclk; + + vmmc-supply = <&ab8500_ldo_aux3_reg>; + vqmmc-supply = <&vmmci>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdi0_default_mode>; + pinctrl-1 = <&sdi0_sleep_mode>; +}; diff --git a/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt b/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt new file mode 100644 index 000000000..b63819149 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/moxa,moxart-mmc.txt @@ -0,0 +1,30 @@ +MOXA ART MMC Host Controller Interface + + Inherits from mmc binding[1]. + + [1] Documentation/devicetree/bindings/mmc/mmc.txt + +Required properties: + +- compatible : Must be "moxa,moxart-mmc" or "faraday,ftsdc010" +- reg : Should contain registers location and length +- interrupts : Should contain the interrupt number +- clocks : Should contain phandle for the clock feeding the MMC controller + +Optional properties: + +- dmas : Should contain two DMA channels, line request number must be 5 for + both channels +- dma-names : Must be "tx", "rx" + +Example: + + mmc: mmc@98e00000 { + compatible = "moxa,moxart-mmc"; + reg = <0x98e00000 0x5C>; + interrupts = <5 0>; + clocks = <&clk_apb>; + dmas = <&dma 5>, + <&dma 5>; + dma-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt new file mode 100644 index 000000000..f33467a54 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt @@ -0,0 +1,68 @@ +* MTK MMC controller + +The MTK MSDC can act as a MMC controller +to support MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties in mmc.txt +and the properties used by the msdc driver. + +Required properties: +- compatible: value should be either of the following. + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 + "mediatek,mt7622-mmc": for MT7622 SoC + "mediatek,mt7623-mmc", "mediatek,mt2701-mmc": for MT7623 SoC + +- reg: physical base address of the controller and length +- interrupts: Should contain MSDC interrupt number +- clocks: Should contain phandle for the clock feeding the MMC controller +- clock-names: Should contain the following: + "source" - source clock (required) + "hclk" - HCLK which used for host (required) + "source_cg" - independent source clock gate (required for MT2712) +- pinctrl-names: should be "default", "state_uhs" +- pinctrl-0: should contain default/high speed pin ctrl +- pinctrl-1: should contain uhs mode pin ctrl +- vmmc-supply: power to the Core +- vqmmc-supply: power to the IO + +Optional properties: +- assigned-clocks: PLL of the source clock +- assigned-clock-parents: parent of source clock, used for HS400 mode to get 400Mhz source clock +- hs400-ds-delay: HS400 DS delay setting +- mediatek,hs200-cmd-int-delay: HS200 command internal delay setting. + This field has total 32 stages. + The value is an integer from 0 to 31. +- mediatek,hs400-cmd-int-delay: HS400 command internal delay setting + This field has total 32 stages. + The value is an integer from 0 to 31. +- mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection + If present,HS400 command responses are sampled on rising edges. + If not present,HS400 command responses are sampled on falling edges. +- mediatek,latch-ck: Some SoCs do not support enhance_rx, need set correct latch-ck to avoid data crc + error caused by stop clock(fifo full) + Valid range = [0:0x7]. if not present, default value is 0. + applied to compatible "mediatek,mt2701-mmc". + +Examples: +mmc0: mmc@11230000 { + compatible = "mediatek,mt8173-mmc", "mediatek,mt8135-mmc"; + reg = <0 0x11230000 0 0x108>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>; + vmmc-supply = <&mt6397_vemc_3v3_reg>; + vqmmc-supply = <&mt6397_vio18_reg>; + clocks = <&pericfg CLK_PERI_MSDC30_0>, + <&topckgen CLK_TOP_MSDC50_0_H_SEL>; + clock-names = "source", "hclk"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + hs400-ds-delay = <0x14015>; + mediatek,hs200-cmd-int-delay = <26>; + mediatek,hs400-cmd-int-delay = <14>; + mediatek,hs400-cmd-resp-sel-rising; +}; diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt new file mode 100644 index 000000000..515addc20 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt @@ -0,0 +1,27 @@ +* Freescale MXS MMC controller + +The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller +to support MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties in mmc.txt +and the properties used by the mxsmmc driver. + +Required properties: +- compatible: Should be "fsl,<chip>-mmc". The supported chips include + imx23 and imx28. +- interrupts: Should contain ERROR interrupt number +- dmas: DMA specifier, consisting of a phandle to DMA controller node + and SSP DMA channel ID. + Refer to dma.txt and fsl-mxs-dma.txt for details. +- dma-names: Must be "rx-tx". + +Examples: + +ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + reg = <0x80010000 2000>; + interrupts = <96>; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + bus-width = <8>; +}; diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt new file mode 100644 index 000000000..9bce57862 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt @@ -0,0 +1,40 @@ +* NVIDIA Tegra Secure Digital Host Controller + +This controller on Tegra family SoCs provides an interface for MMC, SD, +and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the sdhci-tegra driver. + +Required properties: +- compatible : should be one of: + - "nvidia,tegra20-sdhci": for Tegra20 + - "nvidia,tegra30-sdhci": for Tegra30 + - "nvidia,tegra114-sdhci": for Tegra114 + - "nvidia,tegra124-sdhci": for Tegra124 and Tegra132 + - "nvidia,tegra210-sdhci": for Tegra210 + - "nvidia,tegra186-sdhci": for Tegra186 +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - sdhci + +Optional properties: +- power-gpios : Specify GPIOs for power control + +Example: + +sdhci@c8000200 { + compatible = "nvidia,tegra20-sdhci"; + reg = <0xc8000200 0x200>; + interrupts = <47>; + clocks = <&tegra_car 14>; + resets = <&tegra_car 14>; + reset-names = "sdhci"; + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ + bus-width = <8>; +}; diff --git a/Documentation/devicetree/bindings/mmc/orion-sdio.txt b/Documentation/devicetree/bindings/mmc/orion-sdio.txt new file mode 100644 index 000000000..10f0818a3 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/orion-sdio.txt @@ -0,0 +1,16 @@ +* Marvell orion-sdio controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the orion-sdio driver. + +- compatible: Should be "marvell,orion-sdio" +- clocks: reference to the clock of the SDIO interface + +Example: + + mvsdio@d00d4000 { + compatible = "marvell,orion-sdio"; + reg = <0xd00d4000 0x200>; + interrupts = <54>; + clocks = <&gateclk 17>; + }; diff --git a/Documentation/devicetree/bindings/mmc/pxa-mmc.txt b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt new file mode 100644 index 000000000..5f5c2bec2 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt @@ -0,0 +1,25 @@ +* PXA MMC drivers + +Driver bindings for the PXA MCI (MMC/SDIO) interfaces + +Required properties: +- compatible: Should be "marvell,pxa-mmc". +- vmmc-supply: A regulator for VMMC + +Optional properties: +- marvell,detect-delay-ms: sets the detection delay timeout in ms. + +In addition to the properties described in this docuent, the details +described in mmc.txt are supported. + +Examples: + +mmc0: mmc@41100000 { + compatible = "marvell,pxa-mmc"; + reg = <0x41100000 0x1000>; + interrupts = <23>; + vmmc-supply = <&mmc_regulator>; + cd-gpios = <&gpio 23 0>; + wp-gpios = <&gpio 24 0>; +}; + diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt new file mode 100644 index 000000000..5ff1e12c6 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt @@ -0,0 +1,50 @@ +* Renesas Multi Media Card Interface (MMCIF) Controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the MMCIF device. + + +Required properties: + +- compatible: should be "renesas,mmcif-<soctype>", "renesas,sh-mmcif" as a + fallback. Examples with <soctype> are: + - "renesas,mmcif-r7s72100" for the MMCIF found in r7s72100 SoCs + - "renesas,mmcif-r8a73a4" for the MMCIF found in r8a73a4 SoCs + - "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs + - "renesas,mmcif-r8a7743" for the MMCIF found in r8a7743 SoCs + - "renesas,mmcif-r8a7745" for the MMCIF found in r8a7745 SoCs + - "renesas,mmcif-r8a7778" for the MMCIF found in r8a7778 SoCs + - "renesas,mmcif-r8a7790" for the MMCIF found in r8a7790 SoCs + - "renesas,mmcif-r8a7791" for the MMCIF found in r8a7791 SoCs + - "renesas,mmcif-r8a7793" for the MMCIF found in r8a7793 SoCs + - "renesas,mmcif-r8a7794" for the MMCIF found in r8a7794 SoCs + - "renesas,mmcif-sh73a0" for the MMCIF found in sh73a0 SoCs + +- interrupts: Some SoCs have only 1 shared interrupt, while others have either + 2 or 3 individual interrupts (error, int, card detect). Below is the number + of interrupts for each SoC: + 1: r8a73a4, r8a7743, r8a7745, r8a7778, r8a7790, r8a7791, r8a7793, r8a7794 + 2: r8a7740, sh73a0 + 3: r7s72100 + +- clocks: reference to the functional clock + +- dmas: reference to the DMA channels, one per channel name listed in the + dma-names property. +- dma-names: must contain "tx" for the transmit DMA channel and "rx" for the + receive DMA channel. +- max-frequency: Maximum operating clock frequency, driver uses default clock + frequency if it is not set. + + +Example: R8A7790 (R-Car H2) MMCIF0 + + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; + dma-names = "tx", "rx"; + max-frequency = <97500000>; + }; diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt new file mode 100644 index 000000000..6f629b12b --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt @@ -0,0 +1,49 @@ +* Rockchip specific extensions to the Synopsys Designware Mobile + Storage Host Controller + +The Synopsys designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents +differences between the core Synopsys dw mshc controller properties described +by synopsys-dw-mshc.txt and the properties used by the Rockchip specific +extensions to the Synopsys Designware Mobile Storage Host Controller. + +Required Properties: + +* compatible: should be + - "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following, + before RK3288 + - "rockchip,rk3288-dw-mshc": for Rockchip RK3288 + - "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RV1108 + - "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip PX30 + - "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036 + - "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK322x + - "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3328 + - "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368 + - "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399 + +Optional Properties: +* clocks: from common clock binding: if ciu-drive and ciu-sample are + specified in clock-names, should contain handles to these clocks. + +* clock-names: Apart from the clock-names described in synopsys-dw-mshc.txt + two more clocks "ciu-drive" and "ciu-sample" are supported. They are used + to control the clock phases, "ciu-sample" is required for tuning high- + speed modes. + +* rockchip,default-sample-phase: The default phase to set ciu-sample at + probing, low speeds or in case where all phases work at tuning time. + If not specified 0 deg will be used. + +* rockchip,desired-num-phases: The desired number of times that the host + execute tuning when needed. If not specified, the host will do tuning + for 360 times, namely tuning for each degree. + +Example: + + rkdwmmc0@12200000 { + compatible = "rockchip,rk3288-dw-mshc"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt new file mode 100644 index 000000000..5f68feb9f --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt @@ -0,0 +1,42 @@ +* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings + +Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface +with external MMC, SD and SDIO storage mediums. + +This file documents differences between the core mmc properties described by +mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller +implementation. + +Required SoC Specific Properties: +- compatible: should be one of the following + - "samsung,s3c2410-sdi": for controllers compatible with s3c2410 + - "samsung,s3c2412-sdi": for controllers compatible with s3c2412 + - "samsung,s3c2440-sdi": for controllers compatible with s3c2440 +- reg: register location and length +- interrupts: mmc controller interrupt +- clocks: Should reference the controller clock +- clock-names: Should contain "sdi" + +Required Board Specific Properties: +- pinctrl-0: Should specify pin control groups used for this controller. +- pinctrl-names: Should contain only one value - "default". + +Optional Properties: +- bus-width: number of data lines (see mmc.txt) +- cd-gpios: gpio for card detection (see mmc.txt) +- wp-gpios: gpio for write protection (see mmc.txt) + +Example: + + mmc0: mmc@5a000000 { + compatible = "samsung,s3c2440-sdi"; + pinctrl-names = "default"; + pinctrl-0 = <&sdi_pins>; + reg = <0x5a000000 0x100000>; + interrupts = <0 0 21 3>; + clocks = <&clocks PCLK_SDI>; + clock-names = "sdi"; + bus-width = <4>; + cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>; + wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>; + }; diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt new file mode 100644 index 000000000..42e0a9afa --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt @@ -0,0 +1,32 @@ +* Samsung's SDHCI Controller device tree bindings + +Samsung's SDHCI controller is used as a connectivity interface with external +MMC, SD and eMMC storage mediums. This file documents differences between the +core mmc properties described by mmc.txt and the properties used by the +Samsung implementation of the SDHCI controller. + +Required SoC Specific Properties: +- compatible: should be one of the following + - "samsung,s3c6410-sdhci": For controllers compatible with s3c6410 sdhci + controller. + - "samsung,exynos4210-sdhci": For controllers compatible with Exynos4 sdhci + controller. + +Required Board Specific Properties: +- pinctrl-0: Should specify pin control groups used for this controller. +- pinctrl-names: Should contain only one value - "default". + +Example: + sdhci@12530000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12530000 0x100>; + interrupts = <0 75 0>; + bus-width = <4>; + cd-gpios = <&gpk2 2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>; + }; + + Note: This example shows both SoC specific and board specific properties + in a single device node. The properties can be actually be separated + into SoC specific node and board specific node. diff --git a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt new file mode 100644 index 000000000..1b662d717 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt @@ -0,0 +1,21 @@ +* Atmel SDHCI controller + +This file documents the differences between the core properties in +Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the +sdhci-of-at91 driver. + +Required properties: +- compatible: Must be "atmel,sama5d2-sdhci". +- clocks: Phandlers to the clocks. +- clock-names: Must be "hclock", "multclk", "baseclk"; + + +Example: + +sdmmc0: sdio-host@a0000000 { + compatible = "atmel,sama5d2-sdhci"; + reg = <0xa0000000 0x300>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>; + clock-names = "hclock", "multclk", "baseclk"; +}; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt new file mode 100644 index 000000000..fa423c277 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt @@ -0,0 +1,80 @@ +* Cadence SD/SDIO/eMMC Host Controller + +Required properties: +- compatible: should be one of the following: + "cdns,sd4hc" - default of the IP + "socionext,uniphier-sd4hc" - for Socionext UniPhier SoCs +- reg: offset and length of the register set for the device. +- interrupts: a single interrupt specifier. +- clocks: phandle to the input clock. + +Optional properties: +For eMMC configuration, supported speed modes are not indicated by the SDHCI +Capabilities Register. Instead, the following properties should be specified +if supported. See mmc.txt for details. +- mmc-ddr-1_8v +- mmc-ddr-1_2v +- mmc-hs200-1_8v +- mmc-hs200-1_2v +- mmc-hs400-1_8v +- mmc-hs400-1_2v + +Some PHY delays can be configured by following properties. +PHY DLL input delays: +They are used to delay the data valid window, and align the window +to sampling clock. The delay starts from 5ns (for delay parameter equal to 0) +and it is increased by 2.5ns in each step. +- cdns,phy-input-delay-sd-highspeed: + Value of the delay in the input path for SD high-speed timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-legacy: + Value of the delay in the input path for legacy timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-sd-uhs-sdr12: + Value of the delay in the input path for SD UHS SDR12 timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-sd-uhs-sdr25: + Value of the delay in the input path for SD UHS SDR25 timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-sd-uhs-sdr50: + Value of the delay in the input path for SD UHS SDR50 timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-sd-uhs-ddr50: + Value of the delay in the input path for SD UHS DDR50 timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-mmc-highspeed: + Value of the delay in the input path for MMC high-speed timing + Valid range = [0:0x1F]. +- cdns,phy-input-delay-mmc-ddr: + Value of the delay in the input path for eMMC high-speed DDR timing + Valid range = [0:0x1F]. + +PHY DLL clock delays: +Each delay property represents the fraction of the clock period. +The approximate delay value will be +(<delay property value>/128)*sdmclk_clock_period. +- cdns,phy-dll-delay-sdclk: + Value of the delay introduced on the sdclk output + for all modes except HS200, HS400 and HS400_ES. + Valid range = [0:0x7F]. +- cdns,phy-dll-delay-sdclk-hsmmc: + Value of the delay introduced on the sdclk output + for HS200, HS400 and HS400_ES speed modes. + Valid range = [0:0x7F]. +- cdns,phy-dll-delay-strobe: + Value of the delay introduced on the dat_strobe input + used in HS400 / HS400_ES speed modes. + Valid range = [0:0x7F]. + +Example: + emmc: sdhci@5a000000 { + compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; + reg = <0x5a000000 0x400>; + interrupts = <0 78 4>; + clocks = <&clk 4>; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cdns,phy-dll-delay-sdclk = <0>; + }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-dove.txt b/Documentation/devicetree/bindings/mmc/sdhci-dove.txt new file mode 100644 index 000000000..ae9aab9ab --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-dove.txt @@ -0,0 +1,14 @@ +* Marvell sdhci-dove controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers. + +- compatible: Should be "marvell,dove-sdhci". + +Example: + +sdio0: sdio@92000 { + compatible = "marvell,dove-sdhci"; + reg = <0x92000 0x100>; + interrupts = <35>; +}; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt new file mode 100644 index 000000000..3ee9263ad --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt @@ -0,0 +1,32 @@ +* Fujitsu SDHCI controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci_f_sdh30 driver. + +Required properties: +- compatible: "fujitsu,mb86s70-sdhci-3.0" +- clocks: Must contain an entry for each entry in clock-names. It is a + list of phandles and clock-specifier pairs. + See ../clocks/clock-bindings.txt for details. +- clock-names: Should contain the following two entries: + "iface" - clock used for sdhci interface + "core" - core clock for sdhci controller + +Optional properties: +- vqmmc-supply: phandle to the regulator device tree node, mentioned + as the VCCQ/VDD_IO supply in the eMMC/SD specs. +- fujitsu,cmd-dat-delay-select: boolean property indicating that this host + requires the CMD_DAT_DELAY control to be enabled. + +Example: + + sdhci1: mmc@36600000 { + compatible = "fujitsu,mb86s70-sdhci-3.0"; + reg = <0 0x36600000 0x1000>; + interrupts = <0 172 0x4>, + <0 173 0x4>; + bus-width = <4>; + vqmmc-supply = <&vccq_sdhci1>; + clocks = <&clock 2 2 0>, <&clock 2 3 0>; + clock-names = "iface", "core"; + }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt new file mode 100644 index 000000000..502b3b851 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt @@ -0,0 +1,63 @@ +* Qualcomm SDHCI controller (sdhci-msm) + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-msm driver. + +Required properties: +- compatible: Should contain: + "qcom,sdhci-msm-v4" for sdcc versions less than 5.0 + "qcom,sdhci-msm-v5" for sdcc versions >= 5.0 + For SDCC version 5.0.0, MCI registers are removed from SDCC + interface and some registers are moved to HC. New compatible + string is added to support this change - "qcom,sdhci-msm-v5". +- reg: Base address and length of the register in the following order: + - Host controller register map (required) + - SD Core register map (required) +- interrupts: Should contain an interrupt-specifiers for the interrupts: + - Host controller interrupt (required) +- pinctrl-names: Should contain only one value - "default". +- pinctrl-0: Should specify pin control groups used for this controller. +- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names. +- clock-names: Should contain the following: + "iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required) + "core" - SDC MMC clock (MCLK) (required) + "bus" - SDCC bus voter clock (optional) + "xo" - TCXO clock (optional) + "cal" - reference clock for RCLK delay calibration (optional) + "sleep" - sleep clock for RCLK delay calibration (optional) + +Example: + + sdhc_1: sdhci@f9824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + interrupts = <0 123 0>; + bus-width = <8>; + non-removable; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>; + + clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + }; + + sdhc_2: sdhci@f98a4900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + interrupts = <0 125 0>; + bus-width = <4>; + cd-gpios = <&msmgpio 62 0x1>; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>; + + clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; + clock-names = "core", "iface"; + }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt b/Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt new file mode 100644 index 000000000..ee4253b33 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-of-dwcmshc.txt @@ -0,0 +1,20 @@ +* Synopsys DesignWare Cores Mobile Storage Host Controller + +Required properties: +- compatible: should be one of the following: + "snps,dwcmshc-sdhci" +- reg: offset and length of the register set for the device. +- interrupts: a single interrupt specifier. +- clocks: Array of clocks required for SDHCI; requires at least one for + core clock. +- clock-names: Array of names corresponding to clocks property; shall be + "core" for core clock and "bus" for optional bus clock. + +Example: + sdhci2: sdhci@aa0000 { + compatible = "snps,dwcmshc-sdhci"; + reg = <0xaa0000 0x1000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&emmcclk>; + bus-width = <8>; + } diff --git a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt new file mode 100644 index 000000000..393848c21 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt @@ -0,0 +1,23 @@ +* TI OMAP SDHCI Controller + +Refer to mmc.txt for standard MMC bindings. + +Required properties: +- compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers + Should be "ti,k2g-sdhci" for K2G +- ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1 + (Not required for K2G). +- pinctrl-names: Should be subset of "default", "hs", "sdr12", "sdr25", "sdr50", + "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104", + "ddr_1_8v-rev11", "ddr_1_8v" or "ddr_3_3v", "hs200_1_8v-rev11", + "hs200_1_8v", +- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt + +Example: + mmc1: mmc@4809c000 { + compatible = "ti,dra7-sdhci"; + reg = <0x4809c000 0x400>; + ti,hwmods = "mmc1"; + bus-width = <4>; + vmmc-supply = <&vmmc>; /* phandle to regulator node */ + }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt new file mode 100644 index 000000000..3d1b449d6 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt @@ -0,0 +1,50 @@ +* Marvell sdhci-pxa v2/v3 controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers. + +Required properties: +- compatible: Should be "mrvl,pxav2-mmc", "mrvl,pxav3-mmc" or + "marvell,armada-380-sdhci". +- reg: + * for "mrvl,pxav2-mmc" and "mrvl,pxav3-mmc", one register area for + the SDHCI registers. + + * for "marvell,armada-380-sdhci", three register areas. The first + one for the SDHCI registers themselves, the second one for the + AXI/Mbus bridge registers of the SDHCI unit, the third one for the + SDIO3 Configuration register +- reg names: should be "sdhci", "mbus", "conf-sdio3". only mandatory + for "marvell,armada-380-sdhci" +- clocks: Array of clocks required for SDHCI; requires at least one for + I/O clock. +- clock-names: Array of names corresponding to clocks property; shall be + "io" for I/O clock and "core" for optional core clock. + +Optional properties: +- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning. + +Example: + +sdhci@d4280800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4280800 0x800>; + bus-width = <8>; + interrupts = <27>; + clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>; + clock-names = "io", "core"; + non-removable; + mrvl,clk-delay-cycles = <31>; +}; + +sdhci@d8000 { + compatible = "marvell,armada-380-sdhci"; + reg-names = "sdhci", "mbus", "conf-sdio3"; + reg = <0xd8000 0x1000>, + <0xdc000 0x100>; + <0x18454 0x4>; + interrupts = <0 25 0x4>; + clocks = <&gateclk 17>; + clock-names = "io"; + mrvl,clk-delay-cycles = <0x1F>; +}; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-sirf.txt b/Documentation/devicetree/bindings/mmc/sdhci-sirf.txt new file mode 100644 index 000000000..dd6ed464b --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-sirf.txt @@ -0,0 +1,18 @@ +* SiRFprimII/marco/atlas6 SDHCI Controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-sirf driver. + +Required properties: +- compatible: sirf,prima2-sdhc + +Optional properties: +- cd-gpios: card detect gpio, with zero flags. + +Example: + + sd0: sdhci@56000000 { + compatible = "sirf,prima2-sdhc"; + reg = <0xcd000000 0x100000>; + cd-gpios = <&gpio 6 0>; + }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-spear.txt b/Documentation/devicetree/bindings/mmc/sdhci-spear.txt new file mode 100644 index 000000000..fd3643e7e --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-spear.txt @@ -0,0 +1,18 @@ +* SPEAr SDHCI Controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-spear driver. + +Required properties: +- compatible: "st,spear300-sdhci" + +Optional properties: +- cd-gpios: card detect gpio, with zero flags. + +Example: + + sdhci@fc000000 { + compatible = "st,spear300-sdhci"; + reg = <0xfc000000 0x1000>; + cd-gpios = <&gpio0 6 0>; + }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt new file mode 100644 index 000000000..ccf82b4ee --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt @@ -0,0 +1,110 @@ +* STMicroelectronics sdhci-st MMC/SD controller + +This file documents the differences between the core properties in +Documentation/devicetree/bindings/mmc/mmc.txt and the properties +used by the sdhci-st driver. + +Required properties: +- compatible: Must be "st,sdhci" and it can be compatible to "st,sdhci-stih407" + to set the internal glue logic used for configuring the MMC + subsystem (mmcss) inside the FlashSS (available in STiH407 SoC + family). + +- clock-names: Should be "mmc" and "icn". (NB: The latter is not compulsory) + See: Documentation/devicetree/bindings/resource-names.txt +- clocks: Phandle to the clock. + See: Documentation/devicetree/bindings/clock/clock-bindings.txt + +- interrupts: One mmc interrupt should be described here. +- interrupt-names: Should be "mmcirq". + +- pinctrl-names: A pinctrl state names "default" must be defined. +- pinctrl-0: Phandle referencing pin configuration of the sd/emmc controller. + See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + +- reg: This must provide the host controller base address and it can also + contain the FlashSS Top register for TX/RX delay used by the driver + to configure DLL inside the flashSS, if so reg-names must also be + specified. + +Optional properties: +- reg-names: Should be "mmc" and "top-mmc-delay". "top-mmc-delay" is optional + for eMMC on stih407 family silicon to configure DLL inside FlashSS. + +- non-removable: Non-removable slot. Also used for configuring mmcss in STiH407 SoC + family. + See: Documentation/devicetree/bindings/mmc/mmc.txt. + +- bus-width: Number of data lines. + See: Documentation/devicetree/bindings/mmc/mmc.txt. + +- max-frequency: Can be 200MHz, 100MHz or 50MHz (default) and used for + configuring the CCONFIG3 in the mmcss. + See: Documentation/devicetree/bindings/mmc/mmc.txt. + +- resets: Phandle and reset specifier pair to softreset line of HC IP. + See: Documentation/devicetree/bindings/reset/reset.txt + +- vqmmc-supply: Phandle to the regulator dt node, mentioned as the vcc/vdd + supply in eMMC/SD specs. + +- sd-uhs-sdr50: To enable the SDR50 in the mmcss. + See: Documentation/devicetree/bindings/mmc/mmc.txt. + +- sd-uhs-sdr104: To enable the SDR104 in the mmcss. + See: Documentation/devicetree/bindings/mmc/mmc.txt. + +- sd-uhs-ddr50: To enable the DDR50 in the mmcss. + See: Documentation/devicetree/bindings/mmc/mmc.txt. + +Example: + +/* Example stih416e eMMC configuration */ + +mmc0: sdhci@fe81e000 { + compatible = "st,sdhci"; + reg = <0xfe81e000 0x1000>; + interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0>; + clock-names = "mmc"; + clocks = <&clk_s_a1_ls 1>; + bus-width = <8> + +/* Example SD stih407 family configuration */ + +mmc1: sdhci@9080000 { + compatible = "st,sdhci-stih407", "st,sdhci"; + reg = <0x09080000 0x7ff>; + reg-names = "mmc"; + interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd1>; + clock-names = "mmc"; + clocks = <&clk_s_c0_flexgen CLK_MMC_1>; + resets = <&softreset STIH407_MMC1_SOFTRESET>; + bus-width = <4>; +}; + +/* Example eMMC stih407 family configuration */ + +mmc0: sdhci@9060000 { + compatible = "st,sdhci-stih407", "st,sdhci"; + reg = <0x09060000 0x7ff>, <0x9061008 0x20>; + reg-names = "mmc", "top-mmc-delay"; + interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0>; + clock-names = "mmc"; + clocks = <&clk_s_c0_flexgen CLK_MMC_0>; + vqmmc-supply = <&vmmc_reg>; + max-frequency = <200000000>; + bus-width = <8>; + non-removable; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; +}; diff --git a/Documentation/devicetree/bindings/mmc/sdhci.txt b/Documentation/devicetree/bindings/mmc/sdhci.txt new file mode 100644 index 000000000..0e9923a64 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci.txt @@ -0,0 +1,13 @@ +The properties specific for SD host controllers. For properties shared by MMC +host controllers refer to the mmc[1] bindings. + + [1] Documentation/devicetree/bindings/mmc/mmc.txt + +Optional properties: +- sdhci-caps-mask: The sdhci capabilities register is incorrect. This 64bit + property corresponds to the bits in the sdhci capability register. If the bit + is on in the mask then the bit is incorrect in the register and should be + turned off, before applying sdhci-caps. +- sdhci-caps: The sdhci capabilities register is incorrect. This 64bit + property corresponds to the bits in the sdhci capability register. If the + bit is on in the property then the bit should be turned on. diff --git a/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt new file mode 100644 index 000000000..4897bea7e --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt @@ -0,0 +1,23 @@ +* Altera SOCFPGA specific extensions to the Synopsys Designware Mobile + Storage Host Controller + +The Synopsys designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents +differences between the core Synopsys dw mshc controller properties described +by synopsys-dw-mshc.txt and the properties used by the Altera SOCFPGA specific +extensions to the Synopsys Designware Mobile Storage Host Controller. + +Required Properties: + +* compatible: should be + - "altr,socfpga-dw-mshc": for Altera's SOCFPGA platform + +Example: + + mmc: dwmmc0@ff704000 { + compatible = "altr,socfpga-dw-mshc"; + reg = <0xff704000 0x1000>; + interrupts = <0 129 4>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt new file mode 100644 index 000000000..e9cb3ec5e --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt @@ -0,0 +1,52 @@ +* Allwinner sunxi MMC controller + +The highspeed MMC host controller on Allwinner SoCs provides an interface +for MMC, SD and SDIO types of memory cards. + +Supported maximum speeds are the ones of the eMMC standard 4.5 as well +as the speed of SD standard 3.0. +Absolute maximum transfer rate is 200MB/s + +Required properties: + - compatible : should be one of: + * "allwinner,sun4i-a10-mmc" + * "allwinner,sun5i-a13-mmc" + * "allwinner,sun7i-a20-mmc" + * "allwinner,sun8i-a83t-emmc" + * "allwinner,sun9i-a80-mmc" + * "allwinner,sun50i-a64-emmc" + * "allwinner,sun50i-a64-mmc" + * "allwinner,sun50i-h6-emmc", "allwinner.sun50i-a64-emmc" + * "allwinner,sun50i-h6-mmc", "allwinner.sun50i-a64-mmc" + - reg : mmc controller base registers + - clocks : a list with 4 phandle + clock specifier pairs + - clock-names : must contain "ahb", "mmc", "output" and "sample" + - interrupts : mmc controller interrupt + +Optional properties: + - resets : phandle + reset specifier pair + - reset-names : must contain "ahb" + - for cd, bus-width and additional generic mmc parameters + please refer to mmc.txt within this directory + +Examples: + - Within .dtsi: + mmc0: mmc@1c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>, <&mmc0_output_clk>, <&mmc0_sample_clk>; + clock-names = "ahb", "mod", "output", "sample"; + interrupts = <0 32 4>; + status = "disabled"; + }; + + - Within dts: + mmc0: mmc@1c0f000 { + pinctrl-names = "default", "default"; + pinctrl-0 = <&mmc0_pins_a>; + pinctrl-1 = <&mmc0_cd_pin_reference_design>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt new file mode 100644 index 000000000..7e5e427a2 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -0,0 +1,141 @@ +* Synopsys Designware Mobile Storage Host Controller + +The Synopsys designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents +differences between the core mmc properties described by mmc.txt and the +properties used by the Synopsys Designware Mobile Storage Host Controller. + +Required Properties: + +* compatible: should be + - snps,dw-mshc: for controllers compliant with synopsys dw-mshc. +* #address-cells: should be 1. +* #size-cells: should be 0. + +# Slots (DEPRECATED): The slot specific information are contained within + child-nodes with each child-node representing a supported slot. There should + be atleast one child node representing a card slot. The name of the child node + representing the slot is recommended to be slot@n where n is the unique number + of the slot connected to the controller. The following are optional properties + which can be included in the slot child node. + + * reg: specifies the physical slot number. The valid values of this + property is 0 to (num-slots -1), where num-slots is the value + specified by the num-slots property. + + * bus-width: as documented in mmc core bindings. + + * wp-gpios: specifies the write protect gpio line. The format of the + gpio specifier depends on the gpio controller. If a GPIO is not used + for write-protect, this property is optional. + + * disable-wp: If the wp-gpios property isn't present then (by default) + we'd assume that the write protect is hooked up directly to the + controller's special purpose write protect line (accessible via + the WRTPRT register). However, it's possible that we simply don't + want write protect. In that case specify 'disable-wp'. + NOTE: This property is not required for slots known to always + connect to eMMC or SDIO cards. + +Optional properties: + +* resets: phandle + reset specifier pair, intended to represent hardware + reset signal present internally in some host controller IC designs. + See Documentation/devicetree/bindings/reset/reset.txt for details. + +* reset-names: request name for using "resets" property. Must be "reset". + (It will be used together with "resets" property.) + +* clocks: from common clock binding: handle to biu and ciu clocks for the + bus interface unit clock and the card interface unit clock. + +* clock-names: from common clock binding: Shall be "biu" and "ciu". + If the biu clock is missing we'll simply skip enabling it. If the + ciu clock is missing we'll just assume that the clock is running at + clock-frequency. It is an error to omit both the ciu clock and the + clock-frequency. + +* clock-frequency: should be the frequency (in Hz) of the ciu clock. If this + is specified and the ciu clock is specified then we'll try to set the ciu + clock to this at probe time. + +* fifo-depth: The maximum size of the tx/rx fifo's. If this property is not + specified, the default value of the fifo size is determined from the + controller registers. + +* card-detect-delay: Delay in milli-seconds before detecting card after card + insert event. The default value is 0. + +* data-addr: Override fifo address with value provided by DT. The default FIFO reg + offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A) by + driver. If the controller does not follow this rule, please use this property + to set fifo address in device tree. + +* fifo-watermark-aligned: Data done irq is expected if data length is less than + watermark in PIO mode. But fifo watermark is requested to be aligned with data + length in some SoC so that TX/RX irq can be generated with data done irq. Add this + watermark quirk to mark this requirement and force fifo watermark setting + accordingly. + +* vmmc-supply: The phandle to the regulator to use for vmmc. If this is + specified we'll defer probe until we can find this regulator. + +* dmas: List of DMA specifiers with the controller specific format as described + in the generic DMA client binding. Refer to dma.txt for details. + +* dma-names: request names for generic DMA client binding. Must be "rx-tx". + Refer to dma.txt for details. + +Aliases: + +- All the MSHC controller nodes should be represented in the aliases node using + the following format 'mshc{n}' where n is a unique number for the alias. + +Example: + +The MSHC controller node can be split into two portions, SoC specific and +board specific portions as listed below. + + dwmmc0@12200000 { + compatible = "snps,dw-mshc"; + clocks = <&clock 351>, <&clock 132>; + clock-names = "biu", "ciu"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + data-addr = <0x200>; + fifo-watermark-aligned; + resets = <&rst 20>; + reset-names = "reset"; + }; + +[board specific internal DMA resources] + + dwmmc0@12200000 { + clock-frequency = <400000000>; + clock-freq-min-max = <400000 200000000>; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + vmmc-supply = <&buck8>; + bus-width = <8>; + cap-mmc-highspeed; + cap-sd-highspeed; + }; + +[board specific generic DMA request binding] + + dwmmc0@12200000 { + clock-frequency = <400000000>; + clock-freq-min-max = <400000 200000000>; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + vmmc-supply = <&buck8>; + bus-width = <8>; + cap-mmc-highspeed; + cap-sd-highspeed; + dmas = <&pdma 12>; + dma-names = "rx-tx"; + }; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt new file mode 100644 index 000000000..19f5508a7 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -0,0 +1,134 @@ +* TI Highspeed MMC host controller for OMAP and 66AK2G family. + +The Highspeed MMC Host Controller on TI OMAP and 66AK2G family +provides an interface for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the omap_hsmmc driver. + +Required properties: +-------------------- +- compatible: + Should be "ti,omap2-hsmmc", for OMAP2 controllers + Should be "ti,omap3-hsmmc", for OMAP3 controllers + Should be "ti,omap3-pre-es3-hsmmc" for OMAP3 controllers pre ES3.0 + Should be "ti,omap4-hsmmc", for OMAP4 controllers + Should be "ti,am33xx-hsmmc", for AM335x controllers + Should be "ti,k2g-hsmmc", "ti,omap4-hsmmc" for 66AK2G controllers. + +SoC specific required properties: +--------------------------------- +The following are mandatory properties for OMAPs, AM33xx and AM43xx SoCs only: +- ti,hwmods: Must be "mmc<n>", n is controller instance starting 1. + +The following are mandatory properties for 66AK2G SoCs only: +- power-domains:Should contain a phandle to a PM domain provider node + and an args specifier containing the MMC device id + value. This property is as per the binding, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt +- clocks: Must contain an entry for each entry in clock-names. Should + be defined as per the he appropriate clock bindings consumer + usage in Documentation/devicetree/bindings/clock/ti,sci-clk.txt +- clock-names: Shall be "fck" for the functional clock, + and "mmchsdb_fck" for the debounce clock. + + +Optional properties: +-------------------- +- ti,dual-volt: boolean, supports dual voltage cards +- <supply-name>-supply: phandle to the regulator device tree node + "supply-name" examples are "vmmc", + "vmmc_aux"(deprecated)/"vqmmc" etc +- ti,non-removable: non-removable slot (like eMMC) +- ti,needs-special-reset: Requires a special softreset sequence +- ti,needs-special-hs-handling: HSMMC IP needs special setting + for handling High Speed +- dmas: List of DMA specifiers with the controller specific + format as described in the generic DMA client + binding. A tx and rx specifier is required. +- dma-names: List of DMA request names. These strings correspond + 1:1 with the DMA specifiers listed in dmas. + The string naming is to be "rx" and "tx" for + RX and TX DMA requests, respectively. + +Examples: + +[hwmod populated DMA resources] + + mmc1: mmc@4809c000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + ti,hwmods = "mmc1"; + ti,dual-volt; + bus-width = <4>; + vmmc-supply = <&vmmc>; /* phandle to regulator node */ + ti,non-removable; + }; + +[generic DMA request binding] + + mmc1: mmc@4809c000 { + compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + ti,hwmods = "mmc1"; + ti,dual-volt; + bus-width = <4>; + vmmc-supply = <&vmmc>; /* phandle to regulator node */ + ti,non-removable; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; + }; + +[workaround for missing swakeup on am33xx] + +This SOC is missing the swakeup line, it will not detect SDIO irq +while in suspend. + + ------ + | PRCM | + ------ + ^ | + swakeup | | fclk + | v + ------ ------- ----- + | card | -- CIRQ --> | hsmmc | -- IRQ --> | CPU | + ------ ------- ----- + +In suspend the fclk is off and the module is disfunctional. Even register reads +will fail. A small logic in the host will request fclk restore, when an +external event is detected. Once the clock is restored, the host detects the +event normally. Since am33xx doesn't have this line it never wakes from +suspend. + +The workaround is to reconfigure the dat1 line as a GPIO upon suspend. To make +this work, we need to set the named pinctrl states "default" and "idle". +Prepare idle to remux dat1 as a gpio, and default to remux it back as sdio +dat1. The MMC driver will then toggle between idle and default state during +runtime. + +In summary: +1. select matching 'compatible' section, see example below. +2. specify pinctrl states "default" and "idle", "sleep" is optional. +3. specify the gpio irq used for detecting sdio irq in suspend + +If configuration is incomplete, a warning message is emitted "falling back to +polling". Also check the "sdio irq mode" in /sys/kernel/debug/mmc0/regs. Mind +not every application needs SDIO irq, e.g. MMC cards. + + mmc1: mmc@48060100 { + compatible = "ti,am33xx-hsmmc"; + ... + pinctrl-names = "default", "idle", "sleep" + pinctrl-0 = <&mmc1_pins>; + pinctrl-1 = <&mmc1_idle>; + pinctrl-2 = <&mmc1_sleep>; + ... + interrupts-extended = <&intc 64 &gpio2 28 GPIO_ACTIVE_LOW>; + }; + + mmc1_idle : pinmux_cirq_pin { + pinctrl-single,pins = < + 0x0f8 0x3f /* GPIO2_28 */ + >; + }; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap.txt b/Documentation/devicetree/bindings/mmc/ti-omap.txt new file mode 100644 index 000000000..8de579969 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/ti-omap.txt @@ -0,0 +1,54 @@ +* TI MMC host controller for OMAP1 and 2420 + +The MMC Host Controller on TI OMAP1 and 2420 family provides +an interface for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the omap mmc driver. + +Note that this driver will not work with omap2430 or later omaps, +please see the omap hsmmc driver for the current omaps. + +Required properties: +- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers +- ti,hwmods: For 2420, must be "msdi<n>", where n is controller + instance starting 1 + +Examples: + + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + +* TI MMC host controller for OMAP1 and 2420 + +The MMC Host Controller on TI OMAP1 and 2420 family provides +an interface for MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the omap mmc driver. + +Note that this driver will not work with omap2430 or later omaps, +please see the omap hsmmc driver for the current omaps. + +Required properties: +- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers +- ti,hwmods: For 2420, must be "msdi<n>", where n is controller + instance starting 1 + +Examples: + + msdi1: mmc@4809c000 { + compatible = "ti,omap2420-mmc"; + ti,hwmods = "msdi1"; + reg = <0x4809c000 0x80>; + interrupts = <83>; + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; + }; + diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt new file mode 100644 index 000000000..c434200d1 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt @@ -0,0 +1,112 @@ +* Toshiba Mobile IO SD/MMC controller + +The tmio-mmc driver doesn't probe its devices actively, instead its binding to +devices is managed by either MFD drivers or by the sh_mobile_sdhi platform +driver. Those drivers supply the tmio-mmc driver with platform data, that either +describe hardware capabilities, known to them, or are obtained by them from +their own platform data or from their DT information. In the latter case all +compulsory and any optional properties, common to all SD/MMC drivers, as +described in mmc.txt, can be used. Additionally the following tmio_mmc-specific +optional bindings can be used. + +Required properties: +- compatible: should contain one or more of the following: + "renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC + "renesas,sdhi-r7s72100" - SDHI IP on R7S72100 SoC + "renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC + "renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC + "renesas,sdhi-r8a7743" - SDHI IP on R8A7743 SoC + "renesas,sdhi-r8a7745" - SDHI IP on R8A7745 SoC + "renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC + "renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC + "renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC + "renesas,sdhi-r8a7791" - SDHI IP on R8A7791 SoC + "renesas,sdhi-r8a7792" - SDHI IP on R8A7792 SoC + "renesas,sdhi-r8a7793" - SDHI IP on R8A7793 SoC + "renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC + "renesas,sdhi-r8a7795" - SDHI IP on R8A7795 SoC + "renesas,sdhi-r8a7796" - SDHI IP on R8A7796 SoC + "renesas,sdhi-r8a77965" - SDHI IP on R8A77965 SoC + "renesas,sdhi-r8a77980" - SDHI IP on R8A77980 SoC + "renesas,sdhi-r8a77990" - SDHI IP on R8A77990 SoC + "renesas,sdhi-r8a77995" - SDHI IP on R8A77995 SoC + "renesas,sdhi-shmobile" - a generic sh-mobile SDHI controller + "renesas,rcar-gen1-sdhi" - a generic R-Car Gen1 SDHI controller + "renesas,rcar-gen2-sdhi" - a generic R-Car Gen2 or RZ/G1 + SDHI controller + "renesas,rcar-gen3-sdhi" - a generic R-Car Gen3 SDHI controller + + + When compatible with the generic version, nodes must list + the SoC-specific version corresponding to the platform + first followed by the generic version. + +- clocks: Most controllers only have 1 clock source per channel. However, on + some variations of this controller, the internal card detection + logic that exists in this controller is sectioned off to be run by a + separate second clock source to allow the main core clock to be turned + off to save power. + If 2 clocks are specified by the hardware, you must name them as + "core" and "cd". If the controller only has 1 clock, naming is not + required. + Devices which have more than 1 clock are listed below: + 2: R7S72100 + +Optional properties: +- pinctrl-names: should be "default", "state_uhs" +- pinctrl-0: should contain default/high speed pin ctrl +- pinctrl-1: should contain uhs mode pin ctrl + +Example: R8A7790 (R-Car H2) SDHI controller nodes + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0 0xee100000 0 0x328>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 314>; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0 0xee120000 0 0x328>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + dmas = <&dmac0 0xc9>, <&dmac0 0xca>, + <&dmac1 0xc9>, <&dmac1 0xca>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 313>; + }; + + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 312>; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0 0xee160000 0 0x100>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 311>; + }; diff --git a/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt new file mode 100644 index 000000000..6d1b7971d --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt @@ -0,0 +1,39 @@ +* Renesas usdhi6rol0 SD/SDIO host controller + +Required properties: + +- compatible: must be + "renesas,usdhi6rol0" +- interrupts: 3 interrupts, named "card detect", "data" and "SDIO" must be + specified +- clocks: a clock binding for the IMCLK input + +Optional properties: + +- vmmc-supply: a phandle of a regulator, supplying Vcc to the card +- vqmmc-supply: a phandle of a regulator, supplying VccQ to the card +- pinctrl-names: Can contain a "default" entry and a "state_uhs" + entry. The state_uhs entry is used together with the default + entry when the board requires distinct settings for UHS speeds. + +- pinctrl-N: One property for each name listed in pinctrl-names, see + ../pinctrl/pinctrl-bindings.txt. + +Additionally any standard mmc bindings from mmc.txt can be used. + +Example: + +sd0: sd@ab000000 { + compatible = "renesas,usdhi6rol0"; + reg = <0xab000000 0x200>; + interrupts = <0 23 0x4 + 0 24 0x4 + 0 25 0x4>; + interrupt-names = "card detect", "data", "SDIO"; + bus-width = <4>; + max-frequency = <50000000>; + cap-power-off-card; + clocks = <&imclk>; + vmmc-supply = <&vcc_sd0>; + vqmmc-supply = <&vccq_sd0>; +}; diff --git a/Documentation/devicetree/bindings/mmc/vt8500-sdmmc.txt b/Documentation/devicetree/bindings/mmc/vt8500-sdmmc.txt new file mode 100644 index 000000000..d7fb6abb3 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/vt8500-sdmmc.txt @@ -0,0 +1,23 @@ +* Wondermedia WM8505/WM8650 SD/MMC Host Controller + +This file documents differences between the core properties described +by mmc.txt and the properties used by the wmt-sdmmc driver. + +Required properties: +- compatible: Should be "wm,wm8505-sdhc". +- interrupts: Two interrupts are required - regular irq and dma irq. + +Optional properties: +- sdon-inverted: SD_ON bit is inverted on the controller + +Examples: + +sdhc@d800a000 { + compatible = "wm,wm8505-sdhc"; + reg = <0xd800a000 0x1000>; + interrupts = <20 21>; + clocks = <&sdhc>; + bus-width = <4>; + sdon-inverted; +}; + diff --git a/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt new file mode 100644 index 000000000..0f59bd536 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt @@ -0,0 +1,31 @@ +* ZTE specific extensions to the Synopsys Designware Mobile Storage + Host Controller + +The Synopsys designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents +differences between the core Synopsys dw mshc controller properties described +by synopsys-dw-mshc.txt and the properties used by the ZTE specific +extensions to the Synopsys Designware Mobile Storage Host Controller. + +Required Properties: + +* compatible: should be + - "zte,zx296718-dw-mshc": for ZX SoCs + +Example: + + mmc1: mmc@1110000 { + compatible = "zte,zx296718-dw-mshc"; + reg = <0x01110000 0x1000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + fifo-depth = <32>; + data-addr = <0x200>; + fifo-watermark-aligned; + bus-width = <4>; + clock-frequency = <50000000>; + clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>; + clock-names = "biu", "ciu"; + max-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + }; |