Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 53 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
new file mode 100644
index 000000000..062ebb14c
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt
@@ -0,0 +1,53 @@
+TI Real Time Clock
+
+Required properties:
+- compatible:
+	- "ti,da830-rtc"  - for RTC IP used similar to that on DA8xx SoC family.
+	- "ti,am3352-rtc" - for RTC IP used similar to that on AM335x SoC family.
+			    This RTC IP has special WAKE-EN Register to enable
+			    Wakeup generation for event Alarm. It can also be
+			    used to control an external PMIC via the
+			    pmic_power_en pin.
+	- "ti,am4372-rtc" - for RTC IP used similar to that on AM437X SoC family.
+- reg: Address range of rtc register set
+- interrupts: rtc timer, alarm interrupts in order
+
+Optional properties:
+- system-power-controller: whether the rtc is controlling the system power
+  through pmic_power_en
+- clocks: Any internal or external clocks feeding in to rtc
+- clock-names: Corresponding names of the clocks
+- pinctrl-0: a phandle pointing to the pin settings for the device
+- pinctrl-names: should be "default"
+
+Optional subnodes:
+- generic pinctrl node
+
+Required pinctrl subnodes properties:
+- pins - Names of ext_wakeup pins to configure
+
+Optional pinctrl subnodes properties:
+- input-enable - Enables ext_wakeup
+- ti,active-high - Set input active high (by default active low)
+
+Example:
+
+rtc@1c23000 {
+	compatible = "ti,da830-rtc";
+	reg = <0x23000 0x1000>;
+	interrupts = <19
+		      19>;
+	interrupt-parent = <&intc>;
+	system-power-controller;
+	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
+	clock-names = "ext-clk", "int-clk";
+
+	pinctrl-0 = <&ext_wakeup>;
+	pinctrl-names = "default";
+
+	ext_wakeup: ext-wakeup {
+		pins = "ext_wakeup0";
+		input-enable;
+		ti,active-high;
+	};
+};