Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 102 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/sound/da7218.txt b/Documentation/devicetree/bindings/sound/da7218.txt
new file mode 100644
index 000000000..2cf30899b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/da7218.txt
@@ -0,0 +1,102 @@
+Dialog Semiconductor DA7218 Audio Codec bindings
+
+DA7218 is an audio codec with HP detect feature.
+
+======
+
+Required properties:
+- compatible : Should be "dlg,da7217" or "dlg,da7218"
+- reg: Specifies the I2C slave address
+
+- VDD-supply: VDD power supply for the device
+- VDDMIC-supply: VDDMIC power supply for the device
+- VDDIO-supply: VDDIO power supply for the device
+  (See Documentation/devicetree/bindings/regulator/regulator.txt for further
+   information relating to regulators)
+
+Optional properties:
+- interrupts: IRQ line info for DA7218 chip.
+  (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
+   further information relating to interrupt properties)
+- interrupt-names : Name associated with interrupt line. Should be "wakeup" if
+  interrupt is to be used to wake system, otherwise "irq" should be used.
+- wakeup-source: Flag to indicate this device can wake system (suspend/resume).
+
+- clocks : phandle and clock specifier for codec MCLK.
+- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
+
+- dlg,micbias1-lvl-millivolt : Voltage (mV) for Mic Bias 1
+	[<1200>, <1600>, <1800>, <2000>, <2200>, <2400>, <2600>, <2800>, <3000>]
+- dlg,micbias2-lvl-millivolt : Voltage (mV) for Mic Bias 2
+	[<1200>, <1600>, <1800>, <2000>, <2200>, <2400>, <2600>, <2800>, <3000>]
+- dlg,mic1-amp-in-sel : Mic1 input source type
+	["diff", "se_p", "se_n"]
+- dlg,mic2-amp-in-sel : Mic2 input source type
+	["diff", "se_p", "se_n"]
+- dlg,dmic1-data-sel : DMIC1 channel select based on clock edge.
+	["lrise_rfall", "lfall_rrise"]
+- dlg,dmic1-samplephase : When to sample audio from DMIC1.
+	["on_clkedge", "between_clkedge"]
+- dlg,dmic1-clkrate-hz : DMic1 clock frequency (Hz).
+	[<1500000>, <3000000>]
+- dlg,dmic2-data-sel : DMic2 channel select based on clock edge.
+	["lrise_rfall", "lfall_rrise"]
+- dlg,dmic2-samplephase : When to sample audio from DMic2.
+	["on_clkedge", "between_clkedge"]
+- dlg,dmic2-clkrate-hz : DMic2 clock frequency (Hz).
+	[<1500000>, <3000000>]
+- dlg,hp-diff-single-supply : Boolean flag, use single supply for HP
+			      (DA7217 only)
+
+======
+
+Optional Child node - 'da7218_hpldet' (DA7218 only):
+
+Optional properties:
+- dlg,jack-rate-us : Time between jack detect measurements (us)
+	[<5>, <10>, <20>, <40>, <80>, <160>, <320>, <640>]
+- dlg,jack-debounce : Number of debounce measurements taken for jack detect
+	[<0>, <2>, <3>, <4>]
+- dlg,jack-threshold-pct : Threshold level for jack detection (% of VDD)
+	[<84>, <88>, <92>, <96>]
+- dlg,comp-inv : Boolean flag, invert comparator output
+- dlg,hyst : Boolean flag, enable hysteresis
+- dlg,discharge : Boolean flag, auto discharge of Mic Bias on jack removal
+
+======
+
+Example:
+
+	codec: da7218@1a {
+		compatible = "dlg,da7218";
+		reg = <0x1a>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+
+		VDD-supply = <&reg_audio>;
+		VDDMIC-supply = <&reg_audio>;
+		VDDIO-supply = <&reg_audio>;
+
+		clocks = <&clks 201>;
+		clock-names = "mclk";
+
+		dlg,micbias1-lvl-millivolt = <2600>;
+		dlg,micbias2-lvl-millivolt = <2600>;
+		dlg,mic1-amp-in-sel = "diff";
+		dlg,mic2-amp-in-sel = "diff";
+
+		dlg,dmic1-data-sel = "lrise_rfall";
+		dlg,dmic1-samplephase = "on_clkedge";
+		dlg,dmic1-clkrate-hz = <3000000>;
+		dlg,dmic2-data-sel = "lrise_rfall";
+		dlg,dmic2-samplephase = "on_clkedge";
+		dlg,dmic2-clkrate-hz = <3000000>;
+
+		da7218_hpldet {
+			dlg,jack-rate-us = <40>;
+			dlg,jack-debounce = <2>;
+			dlg,jack-threshold-pct = <84>;
+			dlg,hyst;
+		};
+	};