Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 184 insertions, 0 deletions

diff --git a/Documentation/scsi/hptiop.txt b/Documentation/scsi/hptiop.txt
new file mode 100644
index 000000000..12ecfd308
--- /dev/null
+++ b/Documentation/scsi/hptiop.txt
@@ -0,0 +1,184 @@
+HIGHPOINT ROCKETRAID 3xxx/4xxx ADAPTER DRIVER (hptiop)
+
+Controller Register Map
+-------------------------
+
+For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2:
+
+     BAR0 offset    Register
+            0x11C5C Link Interface IRQ Set
+            0x11C60 Link Interface IRQ Clear
+
+     BAR2 offset    Register
+            0x10    Inbound Message Register 0
+            0x14    Inbound Message Register 1
+            0x18    Outbound Message Register 0
+            0x1C    Outbound Message Register 1
+            0x20    Inbound Doorbell Register
+            0x24    Inbound Interrupt Status Register
+            0x28    Inbound Interrupt Mask Register
+            0x30    Outbound Interrupt Status Register
+            0x34    Outbound Interrupt Mask Register
+            0x40    Inbound Queue Port
+            0x44    Outbound Queue Port
+
+For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0:
+
+     BAR0 offset    Register
+            0x10    Inbound Message Register 0
+            0x14    Inbound Message Register 1
+            0x18    Outbound Message Register 0
+            0x1C    Outbound Message Register 1
+            0x20    Inbound Doorbell Register
+            0x24    Inbound Interrupt Status Register
+            0x28    Inbound Interrupt Mask Register
+            0x30    Outbound Interrupt Status Register
+            0x34    Outbound Interrupt Mask Register
+            0x40    Inbound Queue Port
+            0x44    Outbound Queue Port
+
+For Marvell not Frey IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1:
+
+     BAR0 offset    Register
+         0x20400    Inbound Doorbell Register
+         0x20404    Inbound Interrupt Mask Register
+         0x20408    Outbound Doorbell Register
+         0x2040C    Outbound Interrupt Mask Register
+
+     BAR1 offset    Register
+             0x0    Inbound Queue Head Pointer
+             0x4    Inbound Queue Tail Pointer
+             0x8    Outbound Queue Head Pointer
+             0xC    Outbound Queue Tail Pointer
+            0x10    Inbound Message Register
+            0x14    Outbound Message Register
+     0x40-0x1040    Inbound Queue
+   0x1040-0x2040    Outbound Queue
+
+For Marvell Frey IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1:
+
+     BAR0 offset    Register
+             0x0    IOP configuration information.
+
+     BAR1 offset    Register
+          0x4000    Inbound List Base Address Low
+          0x4004    Inbound List Base Address High
+          0x4018    Inbound List Write Pointer
+          0x402C    Inbound List Configuration and Control
+          0x4050    Outbound List Base Address Low
+          0x4054    Outbound List Base Address High
+          0x4058    Outbound List Copy Pointer Shadow Base Address Low
+          0x405C    Outbound List Copy Pointer Shadow Base Address High
+          0x4088    Outbound List Interrupt Cause
+          0x408C    Outbound List Interrupt Enable
+         0x1020C    PCIe Function 0 Interrupt Enable
+         0x10400    PCIe Function 0 to CPU Message A
+         0x10420    CPU to PCIe Function 0 Message A
+         0x10480    CPU to PCIe Function 0 Doorbell
+         0x10484    CPU to PCIe Function 0 Doorbell Enable
+
+
+I/O Request Workflow of Not Marvell Frey
+------------------------------------------
+
+All queued requests are handled via inbound/outbound queue port.
+A request packet can be allocated in either IOP or host memory.
+
+To send a request to the controller:
+
+    - Get a free request packet by reading the inbound queue port or
+      allocate a free request in host DMA coherent memory.
+
+      The value returned from the inbound queue port is an offset
+      relative to the IOP BAR0.
+
+      Requests allocated in host memory must be aligned on 32-bytes boundary.
+
+    - Fill the packet.
+
+    - Post the packet to IOP by writing it to inbound queue. For requests
+      allocated in IOP memory, write the offset to inbound queue port. For
+      requests allocated in host memory, write (0x80000000|(bus_addr>>5))
+      to the inbound queue port.
+
+    - The IOP process the request. When the request is completed, it
+      will be put into outbound queue. An outbound interrupt will be
+      generated.
+
+      For requests allocated in IOP memory, the request offset is posted to
+      outbound queue.
+
+      For requests allocated in host memory, (0x80000000|(bus_addr>>5))
+      is posted to the outbound queue. If IOP_REQUEST_FLAG_OUTPUT_CONTEXT
+      flag is set in the request, the low 32-bit context value will be
+      posted instead.
+
+    - The host read the outbound queue and complete the request.
+
+      For requests allocated in IOP memory, the host driver free the request
+      by writing it to the outbound queue.
+
+Non-queued requests (reset/flush etc) can be sent via inbound message
+register 0. An outbound message with the same value indicates the completion
+of an inbound message.
+
+
+I/O Request Workflow of Marvell Frey
+--------------------------------------
+
+All queued requests are handled via inbound/outbound list.
+
+To send a request to the controller:
+
+    - Allocate a free request in host DMA coherent memory.
+
+      Requests allocated in host memory must be aligned on 32-bytes boundary.
+
+    - Fill the request with index of the request in the flag.
+
+      Fill a free inbound list unit with the physical address and the size of
+      the request.
+
+      Set up the inbound list write pointer with the index of previous unit,
+      round to 0 if the index reaches the supported count of requests.
+
+    - Post the inbound list writer pointer to IOP.
+
+    - The IOP process the request. When the request is completed, the flag of
+      the request with or-ed IOPMU_QUEUE_MASK_HOST_BITS will be put into a
+      free outbound list unit and the index of the outbound list unit will be
+      put into the copy pointer shadow register. An outbound interrupt will be
+      generated.
+
+    - The host read the outbound list copy pointer shadow register and compare
+      with previous saved read pointer N. If they are different, the host will
+      read the (N+1)th outbound list unit.
+
+      The host get the index of the request from the (N+1)th outbound list
+      unit and complete the request.
+
+Non-queued requests (reset communication/reset/flush etc) can be sent via PCIe
+Function 0 to CPU Message A register. The CPU to PCIe Function 0 Message register
+with the same value indicates the completion of message.
+
+
+User-level Interface
+---------------------
+
+The driver exposes following sysfs attributes:
+
+     NAME                 R/W    Description
+     driver-version        R     driver version string
+     firmware-version      R     firmware version string
+
+
+-----------------------------------------------------------------------------
+Copyright (C) 2006-2012 HighPoint Technologies, Inc. All Rights Reserved.
+
+  This file is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  linux@highpoint-tech.com
+  http://www.highpoint-tech.com