Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 91 insertions, 0 deletions

diff --git a/Documentation/sound/cards/joystick.rst b/Documentation/sound/cards/joystick.rst
new file mode 100644
index 000000000..488946fc1
--- /dev/null
+++ b/Documentation/sound/cards/joystick.rst
@@ -0,0 +1,91 @@
+=======================================
+Analog Joystick Support on ALSA Drivers
+=======================================
+
+Oct. 14, 2003
+
+Takashi Iwai <tiwai@suse.de>
+
+General
+-------
+
+First of all, you need to enable GAMEPORT support on Linux kernel for
+using a joystick with the ALSA driver.  For the details of gameport
+support, refer to Documentation/input/joydev/joystick.rst.
+
+The joystick support of ALSA drivers is different between ISA and PCI
+cards.  In the case of ISA (PnP) cards, it's usually handled by the
+independent module (ns558).  Meanwhile, the ALSA PCI drivers have the
+built-in gameport support.  Hence, when the ALSA PCI driver is built
+in the kernel, CONFIG_GAMEPORT must be 'y', too.  Otherwise, the
+gameport support on that card will be (silently) disabled.
+
+Some adapter modules probe the physical connection of the device at
+the load time.  It'd be safer to plug in the joystick device before
+loading the module.
+
+
+PCI Cards
+---------
+
+For PCI cards, the joystick is enabled when the appropriate module
+option is specified.  Some drivers don't need options, and the
+joystick support is always enabled.  In the former ALSA version, there
+was a dynamic control API for the joystick activation.  It was
+changed, however, to the static module options because of the system
+stability and the resource management.
+
+The following PCI drivers support the joystick natively.
+
+==============	=============	============================================
+Driver		Module Option	Available Values
+==============	=============	============================================
+als4000		joystick_port	0 = disable (default), 1 = auto-detect,
+	                        manual: any address (e.g. 0x200)
+au88x0		N/A		N/A
+azf3328		joystick	0 = disable, 1 = enable, -1 = auto (default)
+ens1370		joystick	0 = disable (default), 1 = enable
+ens1371		joystick_port	0 = disable (default), 1 = auto-detect,
+	                        manual: 0x200, 0x208, 0x210, 0x218
+cmipci		joystick_port	0 = disable (default), 1 = auto-detect,
+	                        manual: any address (e.g. 0x200)
+cs4281		N/A		N/A
+cs46xx		N/A		N/A
+es1938		N/A		N/A
+es1968		joystick	0 = disable (default), 1 = enable
+sonicvibes	N/A		N/A
+trident		N/A		N/A
+via82xx [#f1]_	joystick	0 = disable (default), 1 = enable
+ymfpci		joystick_port	0 = disable (default), 1 = auto-detect,
+	                        manual: 0x201, 0x202, 0x204, 0x205 [#f2]_
+==============	=============	============================================
+
+.. [#f1] VIA686A/B only
+.. [#f2] With YMF744/754 chips, the port address can be chosen arbitrarily
+
+The following drivers don't support gameport natively, but there are
+additional modules.  Load the corresponding module to add the gameport
+support.
+
+=======	=================
+Driver	Additional Module
+=======	=================
+emu10k1	emu10k1-gp
+fm801	fm801-gp
+=======	=================
+
+Note: the "pcigame" and "cs461x" modules are for the OSS drivers only.
+These ALSA drivers (cs46xx, trident and au88x0) have the
+built-in gameport support.
+
+As mentioned above, ALSA PCI drivers have the built-in gameport
+support, so you don't have to load ns558 module.  Just load "joydev"
+and the appropriate adapter module (e.g. "analog").
+
+
+ISA Cards
+---------
+
+ALSA ISA drivers don't have the built-in gameport support.
+Instead, you need to load "ns558" module in addition to "joydev" and
+the adapter module (e.g. "analog").