Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 238 insertions, 0 deletions

diff --git a/Documentation/sound/designs/procfile.rst b/Documentation/sound/designs/procfile.rst
new file mode 100644
index 000000000..29a466851
--- /dev/null
+++ b/Documentation/sound/designs/procfile.rst
@@ -0,0 +1,238 @@
+==========================
+Proc Files of ALSA Drivers
+==========================
+
+Takashi Iwai <tiwai@suse.de>
+
+General
+=======
+
+ALSA has its own proc tree, /proc/asound.  Many useful information are
+found in this tree.  When you encounter a problem and need debugging,
+check the files listed in the following sections.
+
+Each card has its subtree cardX, where X is from 0 to 7. The
+card-specific files are stored in the ``card*`` subdirectories.
+
+
+Global Information
+==================
+
+cards
+	Shows the list of currently configured ALSA drivers,
+	index, the id string, short and long descriptions.
+
+version
+	Shows the version string and compile date.
+
+modules
+	Lists the module of each card
+
+devices
+	Lists the ALSA native device mappings.
+
+meminfo
+	Shows the status of allocated pages via ALSA drivers.
+	Appears only when ``CONFIG_SND_DEBUG=y``.
+
+hwdep
+	Lists the currently available hwdep devices in format of
+	``<card>-<device>: <name>``
+
+pcm
+	Lists the currently available PCM devices in format of
+	``<card>-<device>: <id>: <name> : <sub-streams>``
+
+timer
+	Lists the currently available timer devices
+
+
+oss/devices
+	Lists the OSS device mappings.
+
+oss/sndstat
+	Provides the output compatible with /dev/sndstat.
+	You can symlink this to /dev/sndstat.
+
+
+Card Specific Files
+===================
+
+The card-specific files are found in ``/proc/asound/card*`` directories.
+Some drivers (e.g. cmipci) have their own proc entries for the
+register dump, etc (e.g. ``/proc/asound/card*/cmipci`` shows the register
+dump).  These files would be really helpful for debugging.
+
+When PCM devices are available on this card, you can see directories
+like pcm0p or pcm1c.  They hold the PCM information for each PCM
+stream.  The number after ``pcm`` is the PCM device number from 0, and
+the last ``p`` or ``c`` means playback or capture direction.  The files in
+this subtree is described later.
+
+The status of MIDI I/O is found in ``midi*`` files.  It shows the device
+name and the received/transmitted bytes through the MIDI device.
+
+When the card is equipped with AC97 codecs, there are ``codec97#*``
+subdirectories (described later).
+
+When the OSS mixer emulation is enabled (and the module is loaded),
+oss_mixer file appears here, too.  This shows the current mapping of
+OSS mixer elements to the ALSA control elements.  You can change the
+mapping by writing to this device.  Read OSS-Emulation.txt for
+details.
+
+
+PCM Proc Files
+==============
+
+``card*/pcm*/info``
+	The general information of this PCM device: card #, device #,
+	substreams, etc.
+
+``card*/pcm*/xrun_debug``
+	This file appears when ``CONFIG_SND_DEBUG=y`` and
+	``CONFIG_PCM_XRUN_DEBUG=y``.
+	This shows the status of xrun (= buffer overrun/xrun) and
+	invalid PCM position debug/check of ALSA PCM middle layer.
+	It takes an integer value, can be changed by writing to this
+	file, such as::
+
+		 # echo 5 > /proc/asound/card0/pcm0p/xrun_debug
+
+	The value consists of the following bit flags:
+
+	* bit 0 = Enable XRUN/jiffies debug messages
+	* bit 1 = Show stack trace at XRUN / jiffies check
+	* bit 2 = Enable additional jiffies check
+
+	When the bit 0 is set, the driver will show the messages to
+	kernel log when an xrun is detected.  The debug message is
+	shown also when the invalid H/W pointer is detected at the
+	update of periods (usually called from the interrupt
+	handler).
+
+	When the bit 1 is set, the driver will show the stack trace
+	additionally.  This may help the debugging.
+
+	Since 2.6.30, this option can enable the hwptr check using
+	jiffies.  This detects spontaneous invalid pointer callback
+	values, but can be lead to too much corrections for a (mostly
+	buggy) hardware that doesn't give smooth pointer updates.
+	This feature is enabled via the bit 2.
+
+``card*/pcm*/sub*/info``
+	The general information of this PCM sub-stream.
+
+``card*/pcm*/sub*/status``
+	The current status of this PCM sub-stream, elapsed time,
+	H/W position, etc.
+
+``card*/pcm*/sub*/hw_params``
+	The hardware parameters set for this sub-stream.
+
+``card*/pcm*/sub*/sw_params``
+	The soft parameters set for this sub-stream.
+
+``card*/pcm*/sub*/prealloc``
+	The buffer pre-allocation information.
+
+``card*/pcm*/sub*/xrun_injection``
+	Triggers an XRUN to the running stream when any value is
+	written to this proc file.  Used for fault injection.
+	This entry is write-only.
+
+AC97 Codec Information
+======================
+
+``card*/codec97#*/ac97#?-?``
+	Shows the general information of this AC97 codec chip, such as
+	name, capabilities, set up.
+
+``card*/codec97#0/ac97#?-?+regs``
+	Shows the AC97 register dump.  Useful for debugging.
+
+	When CONFIG_SND_DEBUG is enabled, you can write to this file for
+	changing an AC97 register directly.  Pass two hex numbers.
+	For example,
+
+::
+
+	# echo 02 9f1f > /proc/asound/card0/codec97#0/ac97#0-0+regs
+
+
+USB Audio Streams
+=================
+
+``card*/stream*``
+	Shows the assignment and the current status of each audio stream
+	of the given card.  This information is very useful for debugging.
+
+
+HD-Audio Codecs
+===============
+
+``card*/codec#*``
+	Shows the general codec information and the attribute of each
+	widget node.
+
+``card*/eld#*``
+	Available for HDMI or DisplayPort interfaces.
+	Shows ELD(EDID Like Data) info retrieved from the attached HDMI sink,
+	and describes its audio capabilities and configurations.
+
+	Some ELD fields may be modified by doing ``echo name hex_value > eld#*``.
+	Only do this if you are sure the HDMI sink provided value is wrong.
+	And if that makes your HDMI audio work, please report to us so that we
+	can fix it in future kernel releases.
+
+
+Sequencer Information
+=====================
+
+seq/drivers
+	Lists the currently available ALSA sequencer drivers.
+
+seq/clients
+	Shows the list of currently available sequencer clients and
+	ports.  The connection status and the running status are shown
+	in this file, too.
+
+seq/queues
+	Lists the currently allocated/running sequencer queues.
+
+seq/timer
+	Lists the currently allocated/running sequencer timers.
+
+seq/oss
+	Lists the OSS-compatible sequencer stuffs.
+
+
+Help For Debugging?
+===================
+
+When the problem is related with PCM, first try to turn on xrun_debug
+mode.  This will give you the kernel messages when and where xrun
+happened.
+
+If it's really a bug, report it with the following information:
+
+- the name of the driver/card, show in ``/proc/asound/cards``
+- the register dump, if available (e.g. ``card*/cmipci``)
+
+when it's a PCM problem,
+
+- set-up of PCM, shown in hw_parms, sw_params, and status in the PCM
+  sub-stream directory
+
+when it's a mixer problem,
+
+- AC97 proc files, ``codec97#*/*`` files
+
+for USB audio/midi,
+
+- output of ``lsusb -v``
+- ``stream*`` files in card directory
+
+
+The ALSA bug-tracking system is found at:
+https://bugtrack.alsa-project.org/alsa-bug/