Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 163 insertions, 0 deletions

diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig
new file mode 100644
index 000000000..df35ea191
--- /dev/null
+++ b/arch/arc/plat-hsdk/Kconfig
@@ -0,0 +1,16 @@
+# Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com)
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+
+menuconfig ARC_SOC_HSDK
+	bool "ARC HS Development Kit SOC"
+	depends on ISA_ARCV2
+	select ARC_HAS_ACCL_REGS
+	select ARC_IRQ_NO_AUTOSAVE
+	select CLK_HSDK
+	select RESET_CONTROLLER
+	select RESET_HSDK
+	select MIGHT_HAVE_PCI
diff --git a/arch/arc/plat-hsdk/Makefile b/arch/arc/plat-hsdk/Makefile
new file mode 100644
index 000000000..9a50c511a
--- /dev/null
+++ b/arch/arc/plat-hsdk/Makefile
@@ -0,0 +1,9 @@
+#
+# Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com)
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+#
+
+obj-y := platform.o
diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c
new file mode 100644
index 000000000..2588b8424
--- /dev/null
+++ b/arch/arc/plat-hsdk/platform.c
@@ -0,0 +1,138 @@
+/*
+ * ARC HSDK Platform support code
+ *
+ * Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/arcregs.h>
+#include <asm/io.h>
+#include <asm/mach_desc.h>
+
+#define ARC_CCM_UNUSED_ADDR	0x60000000
+
+static void __init hsdk_init_per_cpu(unsigned int cpu)
+{
+	/*
+	 * By default ICCM is mapped to 0x7z while this area is used for
+	 * kernel virtual mappings, so move it to currently unused area.
+	 */
+	if (cpuinfo_arc700[cpu].iccm.sz)
+		write_aux_reg(ARC_REG_AUX_ICCM, ARC_CCM_UNUSED_ADDR);
+
+	/*
+	 * By default DCCM is mapped to 0x8z while this area is used by kernel,
+	 * so move it to currently unused area.
+	 */
+	if (cpuinfo_arc700[cpu].dccm.sz)
+		write_aux_reg(ARC_REG_AUX_DCCM, ARC_CCM_UNUSED_ADDR);
+}
+
+#define ARC_PERIPHERAL_BASE	0xf0000000
+#define CREG_BASE		(ARC_PERIPHERAL_BASE + 0x1000)
+#define CREG_PAE		(CREG_BASE + 0x180)
+#define CREG_PAE_UPDATE		(CREG_BASE + 0x194)
+
+#define SDIO_BASE		(ARC_PERIPHERAL_BASE + 0xA000)
+#define SDIO_UHS_REG_EXT	(SDIO_BASE + 0x108)
+#define SDIO_UHS_REG_EXT_DIV_2	(2 << 30)
+
+#define HSDK_GPIO_INTC          (ARC_PERIPHERAL_BASE + 0x3000)
+
+static void __init hsdk_enable_gpio_intc_wire(void)
+{
+	/*
+	 * Peripherals on CPU Card are wired to cpu intc via intermediate
+	 * DW APB GPIO blocks (mainly for debouncing)
+	 *
+	 *         ---------------------
+	 *        |  snps,archs-intc  |
+	 *        ---------------------
+	 *                  |
+	 *        ----------------------
+	 *        | snps,archs-idu-intc |
+	 *        ----------------------
+	 *         |   |     |   |    |
+	 *         | [eth] [USB]    [... other peripherals]
+	 *         |
+	 * -------------------
+	 * | snps,dw-apb-intc |
+	 * -------------------
+	 *  |      |   |   |
+	 * [Bt] [HAPS]   [... other peripherals]
+	 *
+	 * Current implementation of "irq-dw-apb-ictl" driver doesn't work well
+	 * with stacked INTCs. In particular problem happens if its master INTC
+	 * not yet instantiated. See discussion here -
+	 * https://lkml.org/lkml/2015/3/4/755
+	 *
+	 * So setup the first gpio block as a passive pass thru and hide it from
+	 * DT hardware topology - connect intc directly to cpu intc
+	 * The GPIO "wire" needs to be init nevertheless (here)
+	 *
+	 * One side adv is that peripheral interrupt handling avoids one nested
+	 * intc ISR hop
+	 *
+	 * According to HSDK User's Manual [1], "Table 2 Interrupt Mapping"
+	 * we have the following GPIO input lines used as sources of interrupt:
+	 * - GPIO[0] - Bluetooth interrupt of RS9113 module
+	 * - GPIO[2] - HAPS interrupt (on HapsTrak 3 connector)
+	 * - GPIO[3] - Audio codec (MAX9880A) interrupt
+	 * - GPIO[8-23] - Available on Arduino and PMOD_x headers
+	 * For now there's no use of Arduino and PMOD_x headers in Linux
+	 * use-case so we only enable lines 0, 2 and 3.
+	 *
+	 * [1] https://github.com/foss-for-synopsys-dwc-arc-processors/ARC-Development-Systems-Forum/wiki/docs/ARC_HSDK_User_Guide.pdf
+	 */
+#define GPIO_INTEN              (HSDK_GPIO_INTC + 0x30)
+#define GPIO_INTMASK            (HSDK_GPIO_INTC + 0x34)
+#define GPIO_INTTYPE_LEVEL      (HSDK_GPIO_INTC + 0x38)
+#define GPIO_INT_POLARITY       (HSDK_GPIO_INTC + 0x3c)
+#define GPIO_INT_CONNECTED_MASK	0x0d
+
+	iowrite32(0xffffffff, (void __iomem *) GPIO_INTMASK);
+	iowrite32(~GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTMASK);
+	iowrite32(0x00000000, (void __iomem *) GPIO_INTTYPE_LEVEL);
+	iowrite32(0xffffffff, (void __iomem *) GPIO_INT_POLARITY);
+	iowrite32(GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTEN);
+}
+
+static void __init hsdk_init_early(void)
+{
+	/*
+	 * PAE remapping for DMA clients does not work due to an RTL bug, so
+	 * CREG_PAE register must be programmed to all zeroes, otherwise it
+	 * will cause problems with DMA to/from peripherals even if PAE40 is
+	 * not used.
+	 */
+
+	/* Default is 1, which means "PAE offset = 4GByte" */
+	writel_relaxed(0, (void __iomem *) CREG_PAE);
+
+	/* Really apply settings made above */
+	writel(1, (void __iomem *) CREG_PAE_UPDATE);
+
+	/*
+	 * Switch SDIO external ciu clock divider from default div-by-8 to
+	 * minimum possible div-by-2.
+	 */
+	iowrite32(SDIO_UHS_REG_EXT_DIV_2, (void __iomem *) SDIO_UHS_REG_EXT);
+
+	hsdk_enable_gpio_intc_wire();
+}
+
+static const char *hsdk_compat[] __initconst = {
+	"snps,hsdk",
+	NULL,
+};
+
+MACHINE_START(SIMULATION, "hsdk")
+	.dt_compat	= hsdk_compat,
+	.init_early     = hsdk_init_early,
+	.init_per_cpu	= hsdk_init_per_cpu,
+MACHINE_END