Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 627 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
new file mode 100644
index 000000000..9b41d77aa
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -0,0 +1,627 @@
+/*
+ * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "msm8996.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include "apq8096-db820c-pins.dtsi"
+#include "apq8096-db820c-pmic-pins.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC      = not connected (pin out but not routed from the chip to
+ *                   anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC    = Low Speed External Connector
+ *         P HSEC  = Primary High Speed External Connector
+ *         S HSEC  = Secondary High Speed External Connector
+ *         J14     = Camera Connector
+ *         TP      = Test Points
+ *
+ * Line names are taken from the schematic "DragonBoard 820c",
+ * drawing no: LM25-P2751-1
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+
+/ {
+	aliases {
+		serial0 = &blsp2_uart1;
+		serial1 = &blsp2_uart2;
+		serial2 = &blsp1_uart1;
+		i2c0	= &blsp1_i2c2;
+		i2c1	= &blsp2_i2c1;
+		i2c2	= &blsp2_i2c0;
+		spi0	= &blsp1_spi0;
+		spi1	= &blsp2_spi5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		divclk4: divclk4 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "divclk4";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&divclk4_pin_a>;
+		};
+	};
+
+	soc {
+		serial@7570000 {
+			label = "BT-UART";
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart1_default>;
+			pinctrl-1 = <&blsp1_uart1_sleep>;
+
+			bluetooth {
+				compatible = "qcom,qca6174-bt";
+
+				/* bt_disable_n gpio */
+				enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+
+				clocks = <&divclk4>;
+			};
+		};
+
+		serial@75b0000 {
+			label = "LS-UART1";
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart1_2pins_default>;
+			pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
+		};
+
+		serial@75b1000 {
+			label = "LS-UART0";
+			status = "disabled";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart2_4pins_default>;
+			pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
+		};
+
+		i2c@7577000 {
+		/* On Low speed expansion */
+			label = "LS-I2C0";
+			status = "okay";
+		};
+
+		i2c@75b6000 {
+		/* On Low speed expansion */
+			label = "LS-I2C1";
+			status = "okay";
+		};
+
+		spi@7575000 {
+		/* On Low speed expansion */
+			label = "LS-SPI0";
+			status = "okay";
+		};
+
+		i2c@75b5000 {
+		/* On High speed expansion */
+			label = "HS-I2C2";
+			status = "okay";
+		};
+
+		spi@75ba000{
+		/* On High speed expansion */
+			label = "HS-SPI1";
+			status = "okay";
+		};
+
+		sdhci@74a4900 {
+		/* External SD card */
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+			cd-gpios = <&msmgpio 38 0x1>;
+			vmmc-supply = <&pm8994_l21>;
+			vqmmc-supply = <&pm8994_l13>;
+			status = "okay";
+		};
+
+		phy@627000 {
+			status = "okay";
+		};
+
+		ufshc@624000 {
+			status = "okay";
+		};
+
+		pinctrl@1010000 {
+			gpio-line-names =
+				"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
+				"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
+				"[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
+				"[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
+				"[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
+				"[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
+				"[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
+				"[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
+				"GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
+				"TP93", /* GPIO_9 */
+				"GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
+				"[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
+				"NC", /* GPIO_12 */
+				"[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
+				"[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
+				"[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
+				"TP99", /* GPIO_16 */
+				"[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
+				"[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
+				"[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
+				"[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
+				"FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
+				"FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
+				"GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
+				"GPIO-D", /* GPIO_24, LSEC pin 26 */
+				"GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
+				"GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
+				"BLSP6_I2C_SDA", /* GPIO_27 */
+				"BLSP6_I2C_SCL", /* GPIO_28 */
+				"GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
+				"GPIO30", /* GPIO_30, S HSEC pin 4 */
+				"HDMI_CEC", /* GPIO_31 */
+				"HDMI_DDC_CLOCK", /* GPIO_32 */
+				"HDMI_DDC_DATA", /* GPIO_33 */
+				"HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
+				"PCIE0_RST_N", /* GPIO_35 */
+				"PCIE0_CLKREQ_N", /* GPIO_36 */
+				"PCIE0_WAKE", /* GPIO_37 */
+				"SD_CARD_DET_N", /* GPIO_38 */
+				"TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
+				"W_DISABLE_N", /* GPIO_40 */
+				"[BLSP9_UART_TX]", /* GPIO_41 */
+				"[BLSP9_UART_RX]", /* GPIO_42 */
+				"[BLSP2_UART_CTS_N]", /* GPIO_43 */
+				"[BLSP2_UART_RFR_N]", /* GPIO_44 */
+				"[BLSP3_UART_TX]", /* GPIO_45 */
+				"[BLSP3_UART_RX]", /* GPIO_46 */
+				"[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
+				"[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
+				"[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
+				"[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
+				"[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
+				"[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
+				"[CODEC_INT1_N]", /* GPIO_53 */
+				"[CODEC_INT2_N]", /* GPIO_54 */
+				"[BLSP7_I2C_SDA]", /* GPIO_55 */
+				"[BLSP7_I2C_SCL]", /* GPIO_56 */
+				"MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
+				"[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
+				"[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
+				"[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
+				"[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
+				"GPIO-E", /* GPIO_62, LSEC pin 27 */
+				"TP87", /* GPIO_63 */
+				"[CODEC_RST_N]", /* GPIO_64 */
+				"[PCM1_CLK]", /* GPIO_65 */
+				"[PCM1_SYNC]", /* GPIO_66 */
+				"[PCM1_DIN]", /* GPIO_67 */
+				"[PCM1_DOUT]", /* GPIO_68 */
+				"AUDIO_REF_CLK", /* GPIO_69 */
+				"SLIMBUS_CLK", /* GPIO_70 */
+				"SLIMBUS_DATA0", /* GPIO_71 */
+				"SLIMBUS_DATA1", /* GPIO_72 */
+				"NC", /* GPIO_73 */
+				"NC", /* GPIO_74 */
+				"NC", /* GPIO_75 */
+				"NC", /* GPIO_76 */
+				"TP94", /* GPIO_77 */
+				"NC", /* GPIO_78 */
+				"TP95", /* GPIO_79 */
+				"GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
+				"TP88", /* GPIO_81 */
+				"TP89", /* GPIO_82 */
+				"TP90", /* GPIO_83 */
+				"TP91", /* GPIO_84 */
+				"[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
+				"[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
+				"[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
+				"[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
+				"TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
+				"TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
+				"TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
+				"NC", /* GPIO_92 */
+				"TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
+				"TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
+				"TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
+				"TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
+				"NC", /* GPIO_97 */
+				"CAM1_STANDBY_N", /* GPIO_98 */
+				"NC", /* GPIO_99 */
+				"NC", /* GPIO_100 */
+				"[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
+				"BOOT_CONFIG1", /* GPIO_102 */
+				"USB_HUB_RESET", /* GPIO_103 */
+				"CAM1_RST_N", /* GPIO_104 */
+				"NC", /* GPIO_105 */
+				"NC", /* GPIO_106 */
+				"NC", /* GPIO_107 */
+				"NC", /* GPIO_108 */
+				"NC", /* GPIO_109 */
+				"NC", /* GPIO_110 */
+				"NC", /* GPIO_111 */
+				"NC", /* GPIO_112 */
+				"PMI8994_BUA", /* GPIO_113 */
+				"PCIE2_RST_N", /* GPIO_114 */
+				"PCIE2_CLKREQ_N", /* GPIO_115 */
+				"PCIE2_WAKE", /* GPIO_116 */
+				"SSC_IRQ_0", /* GPIO_117 */
+				"SSC_IRQ_1", /* GPIO_118 */
+				"SSC_IRQ_2", /* GPIO_119 */
+				"NC", /* GPIO_120 */
+				"GPIO121", /* GPIO_121, S HSEC pin 2 */
+				"NC", /* GPIO_122 */
+				"SSC_IRQ_6", /* GPIO_123 */
+				"SSC_IRQ_7", /* GPIO_124 */
+				"GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
+				"BOOT_CONFIG5", /* GPIO_126 */
+				"NC", /* GPIO_127 */
+				"NC", /* GPIO_128 */
+				"BOOT_CONFIG7", /* GPIO_129 */
+				"PCIE1_RST_N", /* GPIO_130 */
+				"PCIE1_CLKREQ_N", /* GPIO_131 */
+				"PCIE1_WAKE", /* GPIO_132 */
+				"GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
+				"NC", /* GPIO_134 */
+				"NC", /* GPIO_135 */
+				"BOOT_CONFIG8", /* GPIO_136 */
+				"NC", /* GPIO_137 */
+				"NC", /* GPIO_138 */
+				"GPS_SSBI2", /* GPIO_139 */
+				"GPS_SSBI1", /* GPIO_140 */
+				"NC", /* GPIO_141 */
+				"NC", /* GPIO_142 */
+				"NC", /* GPIO_143 */
+				"BOOT_CONFIG6", /* GPIO_144 */
+				"NC", /* GPIO_145 */
+				"NC", /* GPIO_146 */
+				"NC", /* GPIO_147 */
+				"NC", /* GPIO_148 */
+				"NC"; /* GPIO_149 */
+		};
+
+		qcom,spmi@400f000 {
+			pmic@0 {
+				gpios@c000 {
+					gpio-line-names =
+						"NC",
+						"KEY_VOLP_N",
+						"NC",
+						"BL1_PWM",
+						"GPIO-F", /* BL0_PWM, LSEC pin 28 */
+						"BL1_EN",
+						"NC",
+						"WLAN_EN",
+						"NC",
+						"NC",
+						"NC",
+						"NC",
+						"NC",
+						"NC",
+						"DIVCLK1",
+						"DIVCLK2",
+						"DIVCLK3",
+						"DIVCLK4",
+						"BT_EN",
+						"PMIC_SLB",
+						"PMIC_BUA",
+						"USB_VBUS_DET";
+				};
+
+				mpps@a000 {
+					gpio-line-names =
+						"VDDPX_BIAS",
+						"WIFI_LED",
+						"NC",
+						"BT_LED",
+						"PM_MPP05",
+						"PM_MPP06",
+						"PM_MPP07",
+						"NC";
+				};
+			};
+
+			pmic@2 {
+				gpios@c000 {
+					gpio-line-names =
+						"NC",
+						"SPKR_AMP_EN1",
+						"SPKR_AMP_EN2",
+						"TP61",
+						"NC",
+						"USB2_VBUS_DET",
+						"NC",
+						"NC",
+						"NC",
+						"NC";
+				};
+			};
+		};
+
+		phy@34000 {
+			status = "okay";
+		};
+
+		phy@7410000 {
+			status = "okay";
+		};
+
+		phy@7411000 {
+			status = "okay";
+		};
+
+		phy@7412000 {
+			status = "okay";
+		};
+
+		usb@6a00000 {
+			status = "okay";
+
+			dwc3@6a00000 {
+				extcon = <&usb3_id>;
+				dr_mode = "otg";
+			};
+		};
+
+		usb3_id: usb3-id {
+			compatible = "linux,extcon-usb-gpio";
+			id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb3_vbus_det_gpio>;
+		};
+
+		usb@7600000 {
+			status = "okay";
+
+			dwc3@7600000 {
+				extcon = <&usb2_id>;
+				dr_mode = "otg";
+				maximum-speed = "high-speed";
+			};
+		};
+
+		usb2_id: usb2-id {
+			compatible = "linux,extcon-usb-gpio";
+			id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb2_vbus_det_gpio>;
+		};
+
+		wlan_en: wlan-en-1-8v {
+			pinctrl-names = "default";
+			pinctrl-0 = <&wlan_en_gpios>;
+			compatible = "regulator-fixed";
+			regulator-name = "wlan-en-regulator";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+
+			gpio = <&pm8994_gpios 8 0>;
+
+			/* WLAN card specific delay */
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
+
+		agnoc@0 {
+			pcie@600000 {
+				status = "okay";
+				perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+				vddpe-3v3-supply = <&wlan_en>;
+			};
+
+			pcie@608000 {
+				status = "okay";
+				perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
+			};
+
+			pcie@610000 {
+				status = "okay";
+				perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
+			};
+		};
+	};
+
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_up_gpio>;
+
+		button@0 {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	rpm-glink {
+		rpm_requests {
+			pm8994-regulators {
+				vdd_l1-supply = <&pm8994_s3>;
+				vdd_l2_l26_l28-supply = <&pm8994_s3>;
+				vdd_l3_l11-supply = <&pm8994_s3>;
+				vdd_l4_l27_l31-supply = <&pm8994_s3>;
+				vdd_l5_l7-supply = <&pm8994_s5>;
+				vdd_l14_l15-supply = <&pm8994_s5>;
+				vdd_l20_l21-supply = <&pm8994_s5>;
+				vdd_l25-supply = <&pm8994_s3>;
+
+				s3 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+				};
+
+				/**
+				 * 1.8v required on LS expansion
+				 * for mezzanine boards
+				 */
+				s4 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+				s5 {
+					regulator-min-microvolt = <2150000>;
+					regulator-max-microvolt = <2150000>;
+				};
+				s7 {
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <800000>;
+				};
+
+				l1 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+				};
+				l2 {
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+				};
+				l3 {
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <850000>;
+				};
+				l4 {
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+				};
+				l6 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+				l8 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+				l9 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+				l10 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+				l11 {
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+				};
+				l12 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+				l13 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2950000>;
+				};
+				l14 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+				l15 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+				l16 {
+					regulator-min-microvolt = <2700000>;
+					regulator-max-microvolt = <2700000>;
+				};
+				l17 {
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
+				};
+				l18 {
+					regulator-min-microvolt = <2700000>;
+					regulator-max-microvolt = <2900000>;
+				};
+				l19 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+				};
+				l20 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					regulator-allow-set-load;
+				};
+				l21 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					regulator-allow-set-load;
+					regulator-system-load = <200000>;
+				};
+				l22 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+				l23 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+				l24 {
+					regulator-min-microvolt = <3075000>;
+					regulator-max-microvolt = <3075000>;
+				};
+				l25 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-allow-set-load;
+				};
+				l27 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+				};
+				l28 {
+					regulator-min-microvolt = <925000>;
+					regulator-max-microvolt = <925000>;
+					regulator-allow-set-load;
+				};
+				l29 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+				l30 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+				l32 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+};