Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 169 insertions, 0 deletions

diff --git a/arch/mips/include/asm/octeon/cvmx-config.h b/arch/mips/include/asm/octeon/cvmx-config.h
new file mode 100644
index 000000000..a8c358c02
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-config.h
@@ -0,0 +1,169 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __CVMX_CONFIG_H__
+#define __CVMX_CONFIG_H__
+
+/************************* Config Specific Defines ************************/
+#define CVMX_LLM_NUM_PORTS 1
+#define CVMX_NULL_POINTER_PROTECT 1
+#define CVMX_ENABLE_DEBUG_PRINTS 1
+/* PKO queues per port for interface 0 (ports 0-15) */
+#define CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 1
+/* PKO queues per port for interface 1 (ports 16-31) */
+#define CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 1
+/* Limit on the number of PKO ports enabled for interface 0 */
+#define CVMX_PKO_MAX_PORTS_INTERFACE0 CVMX_HELPER_PKO_MAX_PORTS_INTERFACE0
+/* Limit on the number of PKO ports enabled for interface 1 */
+#define CVMX_PKO_MAX_PORTS_INTERFACE1 CVMX_HELPER_PKO_MAX_PORTS_INTERFACE1
+/* PKO queues per port for PCI (ports 32-35) */
+#define CVMX_PKO_QUEUES_PER_PORT_PCI 1
+/* PKO queues per port for Loop devices (ports 36-39) */
+#define CVMX_PKO_QUEUES_PER_PORT_LOOP 1
+
+/************************* FPA allocation *********************************/
+/* Pool sizes in bytes, must be multiple of a cache line */
+#define CVMX_FPA_POOL_0_SIZE (16 * CVMX_CACHE_LINE_SIZE)
+#define CVMX_FPA_POOL_1_SIZE (1 * CVMX_CACHE_LINE_SIZE)
+#define CVMX_FPA_POOL_2_SIZE (8 * CVMX_CACHE_LINE_SIZE)
+#define CVMX_FPA_POOL_3_SIZE (0 * CVMX_CACHE_LINE_SIZE)
+#define CVMX_FPA_POOL_4_SIZE (0 * CVMX_CACHE_LINE_SIZE)
+#define CVMX_FPA_POOL_5_SIZE (0 * CVMX_CACHE_LINE_SIZE)
+#define CVMX_FPA_POOL_6_SIZE (0 * CVMX_CACHE_LINE_SIZE)
+#define CVMX_FPA_POOL_7_SIZE (0 * CVMX_CACHE_LINE_SIZE)
+
+/* Pools in use */
+/* Packet buffers */
+#define CVMX_FPA_PACKET_POOL		    (0)
+#define CVMX_FPA_PACKET_POOL_SIZE	    CVMX_FPA_POOL_0_SIZE
+/* Work queue entries */
+#define CVMX_FPA_WQE_POOL		    (1)
+#define CVMX_FPA_WQE_POOL_SIZE		    CVMX_FPA_POOL_1_SIZE
+/* PKO queue command buffers */
+#define CVMX_FPA_OUTPUT_BUFFER_POOL	    (2)
+#define CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE    CVMX_FPA_POOL_2_SIZE
+
+/*************************  FAU allocation ********************************/
+/* The fetch and add registers are allocated here.  They are arranged
+ * in order of descending size so that all alignment constraints are
+ * automatically met.  The enums are linked so that the following enum
+ * continues allocating where the previous one left off, so the
+ * numbering within each enum always starts with zero.	The macros
+ * take care of the address increment size, so the values entered
+ * always increase by 1.  FAU registers are accessed with byte
+ * addresses.
+ */
+
+#define CVMX_FAU_REG_64_ADDR(x) ((x << 3) + CVMX_FAU_REG_64_START)
+typedef enum {
+	CVMX_FAU_REG_64_START	= 0,
+	CVMX_FAU_REG_64_END	= CVMX_FAU_REG_64_ADDR(0),
+} cvmx_fau_reg_64_t;
+
+#define CVMX_FAU_REG_32_ADDR(x) ((x << 2) + CVMX_FAU_REG_32_START)
+typedef enum {
+	CVMX_FAU_REG_32_START	= CVMX_FAU_REG_64_END,
+	CVMX_FAU_REG_32_END	= CVMX_FAU_REG_32_ADDR(0),
+} cvmx_fau_reg_32_t;
+
+#define CVMX_FAU_REG_16_ADDR(x) ((x << 1) + CVMX_FAU_REG_16_START)
+typedef enum {
+	CVMX_FAU_REG_16_START	= CVMX_FAU_REG_32_END,
+	CVMX_FAU_REG_16_END	= CVMX_FAU_REG_16_ADDR(0),
+} cvmx_fau_reg_16_t;
+
+#define CVMX_FAU_REG_8_ADDR(x) ((x) + CVMX_FAU_REG_8_START)
+typedef enum {
+	CVMX_FAU_REG_8_START	= CVMX_FAU_REG_16_END,
+	CVMX_FAU_REG_8_END	= CVMX_FAU_REG_8_ADDR(0),
+} cvmx_fau_reg_8_t;
+
+/*
+ * The name CVMX_FAU_REG_AVAIL_BASE is provided to indicate the first
+ * available FAU address that is not allocated in cvmx-config.h. This
+ * is 64 bit aligned.
+ */
+#define CVMX_FAU_REG_AVAIL_BASE ((CVMX_FAU_REG_8_END + 0x7) & (~0x7ULL))
+#define CVMX_FAU_REG_END (2048)
+
+/********************** scratch memory allocation *************************/
+/* Scratchpad memory allocation.  Note that these are byte memory
+ * addresses.  Some uses of scratchpad (IOBDMA for example) require
+ * the use of 8-byte aligned addresses, so proper alignment needs to
+ * be taken into account.
+ */
+/* Generic scratch iobdma area */
+#define CVMX_SCR_SCRATCH	       (0)
+/* First location available after cvmx-config.h allocated region. */
+#define CVMX_SCR_REG_AVAIL_BASE	       (8)
+
+/*
+ * CVMX_HELPER_FIRST_MBUFF_SKIP is the number of bytes to reserve
+ * before the beginning of the packet. If necessary, override the
+ * default here.  See the IPD section of the hardware manual for MBUFF
+ * SKIP details.
+ */
+#define CVMX_HELPER_FIRST_MBUFF_SKIP 184
+
+/*
+ * CVMX_HELPER_NOT_FIRST_MBUFF_SKIP is the number of bytes to reserve
+ * in each chained packet element. If necessary, override the default
+ * here.
+ */
+#define CVMX_HELPER_NOT_FIRST_MBUFF_SKIP 0
+
+/*
+ * CVMX_HELPER_ENABLE_BACK_PRESSURE controls whether back pressure is
+ * enabled for all input ports. This controls if IPD sends
+ * backpressure to all ports if Octeon's FPA pools don't have enough
+ * packet or work queue entries. Even when this is off, it is still
+ * possible to get backpressure from individual hardware ports. When
+ * configuring backpressure, also check
+ * CVMX_HELPER_DISABLE_*_BACKPRESSURE below. If necessary, override
+ * the default here.
+ */
+#define CVMX_HELPER_ENABLE_BACK_PRESSURE 1
+
+/*
+ * CVMX_HELPER_ENABLE_IPD controls if the IPD is enabled in the helper
+ * function. Once it is enabled the hardware starts accepting
+ * packets. You might want to skip the IPD enable if configuration
+ * changes are need from the default helper setup. If necessary,
+ * override the default here.
+ */
+#define CVMX_HELPER_ENABLE_IPD 0
+
+/*
+ * CVMX_HELPER_INPUT_TAG_TYPE selects the type of tag that the IPD assigns
+ * to incoming packets.
+ */
+#define CVMX_HELPER_INPUT_TAG_TYPE CVMX_POW_TAG_TYPE_ORDERED
+
+#define CVMX_ENABLE_PARAMETER_CHECKING 0
+
+/*
+ * The following select which fields are used by the PIP to generate
+ * the tag on INPUT
+ * 0: don't include
+ * 1: include
+ */
+#define CVMX_HELPER_INPUT_TAG_IPV6_SRC_IP	0
+#define CVMX_HELPER_INPUT_TAG_IPV6_DST_IP	0
+#define CVMX_HELPER_INPUT_TAG_IPV6_SRC_PORT	0
+#define CVMX_HELPER_INPUT_TAG_IPV6_DST_PORT	0
+#define CVMX_HELPER_INPUT_TAG_IPV6_NEXT_HEADER	0
+#define CVMX_HELPER_INPUT_TAG_IPV4_SRC_IP	0
+#define CVMX_HELPER_INPUT_TAG_IPV4_DST_IP	0
+#define CVMX_HELPER_INPUT_TAG_IPV4_SRC_PORT	0
+#define CVMX_HELPER_INPUT_TAG_IPV4_DST_PORT	0
+#define CVMX_HELPER_INPUT_TAG_IPV4_PROTOCOL	0
+#define CVMX_HELPER_INPUT_TAG_INPUT_PORT	1
+
+/* Select skip mode for input ports */
+#define CVMX_HELPER_INPUT_PORT_SKIP_MODE	CVMX_PIP_PORT_CFG_MODE_SKIPL2
+
+/*
+ * Force backpressure to be disabled.  This overrides all other
+ * backpressure configuration.
+ */
+#define CVMX_HELPER_DISABLE_RGMII_BACKPRESSURE 0
+
+#endif /* __CVMX_CONFIG_H__ */