Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 159 insertions, 0 deletions

diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c
new file mode 100644
index 000000000..8131e0ffe
--- /dev/null
+++ b/arch/mips/pci/fixup-malta.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/mips-boards/piix4.h>
+
+/* PCI interrupt pins */
+#define PCIA		1
+#define PCIB		2
+#define PCIC		3
+#define PCID		4
+
+/* This table is filled in by interrogating the PIIX4 chip */
+static char pci_irq[5] = {
+};
+
+static char irq_tab[][5] = {
+	/*	INTA	INTB	INTC	INTD */
+	{0,	0,	0,	0,	0 },	/*  0: GT64120 PCI bridge */
+	{0,	0,	0,	0,	0 },	/*  1: Unused */
+	{0,	0,	0,	0,	0 },	/*  2: Unused */
+	{0,	0,	0,	0,	0 },	/*  3: Unused */
+	{0,	0,	0,	0,	0 },	/*  4: Unused */
+	{0,	0,	0,	0,	0 },	/*  5: Unused */
+	{0,	0,	0,	0,	0 },	/*  6: Unused */
+	{0,	0,	0,	0,	0 },	/*  7: Unused */
+	{0,	0,	0,	0,	0 },	/*  8: Unused */
+	{0,	0,	0,	0,	0 },	/*  9: Unused */
+	{0,	0,	0,	0,	PCID }, /* 10: PIIX4 USB */
+	{0,	PCIB,	0,	0,	0 },	/* 11: AMD 79C973 Ethernet */
+	{0,	PCIC,	0,	0,	0 },	/* 12: Crystal 4281 Sound */
+	{0,	0,	0,	0,	0 },	/* 13: Unused */
+	{0,	0,	0,	0,	0 },	/* 14: Unused */
+	{0,	0,	0,	0,	0 },	/* 15: Unused */
+	{0,	0,	0,	0,	0 },	/* 16: Unused */
+	{0,	0,	0,	0,	0 },	/* 17: Bonito/SOC-it PCI Bridge*/
+	{0,	PCIA,	PCIB,	PCIC,	PCID }, /* 18: PCI Slot 1 */
+	{0,	PCIB,	PCIC,	PCID,	PCIA }, /* 19: PCI Slot 2 */
+	{0,	PCIC,	PCID,	PCIA,	PCIB }, /* 20: PCI Slot 3 */
+	{0,	PCID,	PCIA,	PCIB,	PCIC }	/* 21: PCI Slot 4 */
+};
+
+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int virq;
+	virq = irq_tab[slot][pin];
+	return pci_irq[virq];
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+static void malta_piix_func3_base_fixup(struct pci_dev *dev)
+{
+	/* Set a sane PM I/O base address */
+	pci_write_config_word(dev, PIIX4_FUNC3_PMBA, 0x1000);
+
+	/* Enable access to the PM I/O region */
+	pci_write_config_byte(dev, PIIX4_FUNC3_PMREGMISC,
+			      PIIX4_FUNC3_PMREGMISC_EN);
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3,
+			malta_piix_func3_base_fixup);
+
+static void malta_piix_func0_fixup(struct pci_dev *pdev)
+{
+	unsigned char reg_val;
+	u32 reg_val32;
+	u16 reg_val16;
+	/* PIIX PIRQC[A:D] irq mappings */
+	static int piixirqmap[PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MAX] = {
+		0,  0,	0,  3,
+		4,  5,	6,  7,
+		0,  9, 10, 11,
+		12, 0, 14, 15
+	};
+	int i;
+
+	/* Interrogate PIIX4 to get PCI IRQ mapping */
+	for (i = 0; i <= 3; i++) {
+		pci_read_config_byte(pdev, PIIX4_FUNC0_PIRQRC+i, &reg_val);
+		if (reg_val & PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_DISABLE)
+			pci_irq[PCIA+i] = 0;	/* Disabled */
+		else
+			pci_irq[PCIA+i] = piixirqmap[reg_val &
+				PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MASK];
+	}
+
+	/* Done by YAMON 2.00 onwards */
+	if (PCI_SLOT(pdev->devfn) == 10) {
+		/*
+		 * Set top of main memory accessible by ISA or DMA
+		 * devices to 16 Mb.
+		 */
+		pci_read_config_byte(pdev, PIIX4_FUNC0_TOM, &reg_val);
+		pci_write_config_byte(pdev, PIIX4_FUNC0_TOM, reg_val |
+				PIIX4_FUNC0_TOM_TOP_OF_MEMORY_MASK);
+	}
+
+	/* Mux SERIRQ to its pin */
+	pci_read_config_dword(pdev, PIIX4_FUNC0_GENCFG, &reg_val32);
+	pci_write_config_dword(pdev, PIIX4_FUNC0_GENCFG,
+			       reg_val32 | PIIX4_FUNC0_GENCFG_SERIRQ);
+
+	/* Enable SERIRQ */
+	pci_read_config_byte(pdev, PIIX4_FUNC0_SERIRQC, &reg_val);
+	reg_val |= PIIX4_FUNC0_SERIRQC_EN | PIIX4_FUNC0_SERIRQC_CONT;
+	pci_write_config_byte(pdev, PIIX4_FUNC0_SERIRQC, reg_val);
+
+	/* Enable response to special cycles */
+	pci_read_config_word(pdev, PCI_COMMAND, &reg_val16);
+	pci_write_config_word(pdev, PCI_COMMAND,
+			      reg_val16 | PCI_COMMAND_SPECIAL);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
+	 malta_piix_func0_fixup);
+
+static void malta_piix_func1_fixup(struct pci_dev *pdev)
+{
+	unsigned char reg_val;
+
+	/* Done by YAMON 2.02 onwards */
+	if (PCI_SLOT(pdev->devfn) == 10) {
+		/*
+		 * IDE Decode enable.
+		 */
+		pci_read_config_byte(pdev, PIIX4_FUNC1_IDETIM_PRIMARY_HI,
+			&reg_val);
+		pci_write_config_byte(pdev, PIIX4_FUNC1_IDETIM_PRIMARY_HI,
+			reg_val|PIIX4_FUNC1_IDETIM_PRIMARY_HI_IDE_DECODE_EN);
+		pci_read_config_byte(pdev, PIIX4_FUNC1_IDETIM_SECONDARY_HI,
+			&reg_val);
+		pci_write_config_byte(pdev, PIIX4_FUNC1_IDETIM_SECONDARY_HI,
+			reg_val|PIIX4_FUNC1_IDETIM_SECONDARY_HI_IDE_DECODE_EN);
+	}
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB,
+	 malta_piix_func1_fixup);
+
+/* Enable PCI 2.1 compatibility in PIIX4 */
+static void quirk_dlcsetup(struct pci_dev *dev)
+{
+	u8 odlc, ndlc;
+
+	(void) pci_read_config_byte(dev, PIIX4_FUNC0_DLC, &odlc);
+	/* Enable passive releases and delayed transaction */
+	ndlc = odlc | PIIX4_FUNC0_DLC_USBPR_EN |
+		      PIIX4_FUNC0_DLC_PASSIVE_RELEASE_EN |
+		      PIIX4_FUNC0_DLC_DELAYED_TRANSACTION_EN;
+	(void) pci_write_config_byte(dev, PIIX4_FUNC0_DLC, ndlc);
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
+	quirk_dlcsetup);