Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

10 files changed, 1141 insertions, 0 deletions

diff --git a/arch/mips/sgi-ip32/Makefile b/arch/mips/sgi-ip32/Makefile
new file mode 100644
index 000000000..4745cd94d
--- /dev/null
+++ b/arch/mips/sgi-ip32/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the SGI specific kernel interface routines
+# under Linux.
+#
+
+obj-y	+= ip32-berr.o ip32-irq.o ip32-platform.o ip32-setup.o ip32-reset.o \
+	   crime.o ip32-memory.o ip32-dma.o
diff --git a/arch/mips/sgi-ip32/Platform b/arch/mips/sgi-ip32/Platform
new file mode 100644
index 000000000..0fea556f3
--- /dev/null
+++ b/arch/mips/sgi-ip32/Platform
@@ -0,0 +1,11 @@
+#
+# SGI-IP32 (O2)
+#
+# Set the load address to >= 80069000 if you want to leave space for symmon,
+# 0xffffffff80004000 for production kernels.  Note that the value must be aligned to
+# a multiple of the kernel stack size or the handling of the current variable
+# will break.
+#
+platform-$(CONFIG_SGI_IP32)	+= sgi-ip32/
+cflags-$(CONFIG_SGI_IP32)	+= -I$(srctree)/arch/mips/include/asm/mach-ip32
+load-$(CONFIG_SGI_IP32)		+= 0xffffffff80004000
diff --git a/arch/mips/sgi-ip32/crime.c b/arch/mips/sgi-ip32/crime.c
new file mode 100644
index 000000000..a8e0c776c
--- /dev/null
+++ b/arch/mips/sgi-ip32/crime.c
@@ -0,0 +1,103 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001, 2003 Keith M Wesolowski
+ * Copyright (C) 2005 Ilya A. Volynets <ilya@total-knowledge.com>
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/export.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/page.h>
+#include <asm/ip32/crime.h>
+#include <asm/ip32/mace.h>
+
+struct sgi_crime __iomem *crime;
+struct sgi_mace __iomem *mace;
+
+EXPORT_SYMBOL_GPL(mace);
+
+void __init crime_init(void)
+{
+	unsigned int id, rev;
+	const int field = 2 * sizeof(unsigned long);
+
+	set_io_port_base((unsigned long) ioremap(MACEPCI_LOW_IO, 0x2000000));
+	crime = ioremap(CRIME_BASE, sizeof(struct sgi_crime));
+	mace = ioremap(MACE_BASE, sizeof(struct sgi_mace));
+
+	id = crime->id;
+	rev = id & CRIME_ID_REV;
+	id = (id & CRIME_ID_IDBITS) >> 4;
+	printk(KERN_INFO "CRIME id %1x rev %d at 0x%0*lx\n",
+	       id, rev, field, (unsigned long) CRIME_BASE);
+}
+
+irqreturn_t crime_memerr_intr(unsigned int irq, void *dev_id)
+{
+	unsigned long stat, addr;
+	int fatal = 0;
+
+	stat = crime->mem_error_stat & CRIME_MEM_ERROR_STAT_MASK;
+	addr = crime->mem_error_addr & CRIME_MEM_ERROR_ADDR_MASK;
+
+	printk("CRIME memory error at 0x%08lx ST 0x%08lx<", addr, stat);
+
+	if (stat & CRIME_MEM_ERROR_INV)
+		printk("INV,");
+	if (stat & CRIME_MEM_ERROR_ECC) {
+		unsigned long ecc_syn =
+			crime->mem_ecc_syn & CRIME_MEM_ERROR_ECC_SYN_MASK;
+		unsigned long ecc_gen =
+			crime->mem_ecc_chk & CRIME_MEM_ERROR_ECC_CHK_MASK;
+		printk("ECC,SYN=0x%08lx,GEN=0x%08lx,", ecc_syn, ecc_gen);
+	}
+	if (stat & CRIME_MEM_ERROR_MULTIPLE) {
+		fatal = 1;
+		printk("MULTIPLE,");
+	}
+	if (stat & CRIME_MEM_ERROR_HARD_ERR) {
+		fatal = 1;
+		printk("HARD,");
+	}
+	if (stat & CRIME_MEM_ERROR_SOFT_ERR)
+		printk("SOFT,");
+	if (stat & CRIME_MEM_ERROR_CPU_ACCESS)
+		printk("CPU,");
+	if (stat & CRIME_MEM_ERROR_VICE_ACCESS)
+		printk("VICE,");
+	if (stat & CRIME_MEM_ERROR_GBE_ACCESS)
+		printk("GBE,");
+	if (stat & CRIME_MEM_ERROR_RE_ACCESS)
+		printk("RE,REID=0x%02lx,", (stat & CRIME_MEM_ERROR_RE_ID)>>8);
+	if (stat & CRIME_MEM_ERROR_MACE_ACCESS)
+		printk("MACE,MACEID=0x%02lx,", stat & CRIME_MEM_ERROR_MACE_ID);
+
+	crime->mem_error_stat = 0;
+
+	if (fatal) {
+		printk("FATAL>\n");
+		panic("Fatal memory error.");
+	} else
+		printk("NONFATAL>\n");
+
+	return IRQ_HANDLED;
+}
+
+irqreturn_t crime_cpuerr_intr(unsigned int irq, void *dev_id)
+{
+	unsigned long stat = crime->cpu_error_stat & CRIME_CPU_ERROR_MASK;
+	unsigned long addr = crime->cpu_error_addr & CRIME_CPU_ERROR_ADDR_MASK;
+
+	addr <<= 2;
+	printk("CRIME CPU error at 0x%09lx status 0x%08lx\n", addr, stat);
+	crime->cpu_error_stat = 0;
+
+	return IRQ_HANDLED;
+}
diff --git a/arch/mips/sgi-ip32/ip32-berr.c b/arch/mips/sgi-ip32/ip32-berr.c
new file mode 100644
index 000000000..c1f12a9cf
--- /dev/null
+++ b/arch/mips/sgi-ip32/ip32-berr.c
@@ -0,0 +1,38 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1999, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 by Silicon Graphics
+ * Copyright (C) 2002  Maciej W. Rozycki
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/sched/signal.h>
+#include <asm/traps.h>
+#include <linux/uaccess.h>
+#include <asm/addrspace.h>
+#include <asm/ptrace.h>
+#include <asm/tlbdebug.h>
+
+static int ip32_be_handler(struct pt_regs *regs, int is_fixup)
+{
+	int data = regs->cp0_cause & 4;
+
+	if (is_fixup)
+		return MIPS_BE_FIXUP;
+
+	printk("Got %cbe at 0x%lx\n", data ? 'd' : 'i', regs->cp0_epc);
+	show_regs(regs);
+	dump_tlb_all();
+	while(1);
+	force_sig(SIGBUS, current);
+}
+
+void __init ip32_be_init(void)
+{
+	board_be_handler = ip32_be_handler;
+}
diff --git a/arch/mips/sgi-ip32/ip32-dma.c b/arch/mips/sgi-ip32/ip32-dma.c
new file mode 100644
index 000000000..fa7b17cb5
--- /dev/null
+++ b/arch/mips/sgi-ip32/ip32-dma.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/dma-direct.h>
+#include <asm/ip32/crime.h>
+
+/*
+ * Few notes.
+ * 1. CPU sees memory as two chunks: 0-256M@0x0, and the rest @0x40000000+256M
+ * 2. PCI sees memory as one big chunk @0x0 (or we could use 0x40000000 for
+ *    native-endian)
+ * 3. All other devices see memory as one big chunk at 0x40000000
+ * 4. Non-PCI devices will pass NULL as struct device*
+ *
+ * Thus we translate differently, depending on device.
+ */
+
+#define RAM_OFFSET_MASK 0x3fffffffUL
+
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	dma_addr_t dma_addr = paddr & RAM_OFFSET_MASK;
+
+	if (!dev)
+		dma_addr += CRIME_HI_MEM_BASE;
+	return dma_addr;
+}
+
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
+{
+	phys_addr_t paddr = dma_addr & RAM_OFFSET_MASK;
+
+	if (dma_addr >= 256*1024*1024)
+		paddr += CRIME_HI_MEM_BASE;
+	return paddr;
+}
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
new file mode 100644
index 000000000..a6a0ff7f5
--- /dev/null
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -0,0 +1,505 @@
+/*
+ * Code to handle IP32 IRQs
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Harald Koerfgen
+ * Copyright (C) 2001 Keith M Wesolowski
+ */
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/random.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/signal.h>
+#include <asm/time.h>
+#include <asm/ip32/crime.h>
+#include <asm/ip32/mace.h>
+#include <asm/ip32/ip32_ints.h>
+
+/* issue a PIO read to make sure no PIO writes are pending */
+static inline void flush_crime_bus(void)
+{
+	crime->control;
+}
+
+static inline void flush_mace_bus(void)
+{
+	mace->perif.ctrl.misc;
+}
+
+/*
+ * O2 irq map
+ *
+ * IP0 -> software (ignored)
+ * IP1 -> software (ignored)
+ * IP2 -> (irq0) C crime 1.1 all interrupts; crime 1.5 ???
+ * IP3 -> (irq1) X unknown
+ * IP4 -> (irq2) X unknown
+ * IP5 -> (irq3) X unknown
+ * IP6 -> (irq4) X unknown
+ * IP7 -> (irq5) 7 CPU count/compare timer (system timer)
+ *
+ * crime: (C)
+ *
+ * CRIME_INT_STAT 31:0:
+ *
+ * 0  ->  8  Video in 1
+ * 1  ->  9 Video in 2
+ * 2  -> 10  Video out
+ * 3  -> 11  Mace ethernet
+ * 4  -> S  SuperIO sub-interrupt
+ * 5  -> M  Miscellaneous sub-interrupt
+ * 6  -> A  Audio sub-interrupt
+ * 7  -> 15  PCI bridge errors
+ * 8  -> 16  PCI SCSI aic7xxx 0
+ * 9  -> 17 PCI SCSI aic7xxx 1
+ * 10 -> 18 PCI slot 0
+ * 11 -> 19 unused (PCI slot 1)
+ * 12 -> 20 unused (PCI slot 2)
+ * 13 -> 21 unused (PCI shared 0)
+ * 14 -> 22 unused (PCI shared 1)
+ * 15 -> 23 unused (PCI shared 2)
+ * 16 -> 24 GBE0 (E)
+ * 17 -> 25 GBE1 (E)
+ * 18 -> 26 GBE2 (E)
+ * 19 -> 27 GBE3 (E)
+ * 20 -> 28 CPU errors
+ * 21 -> 29 Memory errors
+ * 22 -> 30 RE empty edge (E)
+ * 23 -> 31 RE full edge (E)
+ * 24 -> 32 RE idle edge (E)
+ * 25 -> 33 RE empty level
+ * 26 -> 34 RE full level
+ * 27 -> 35 RE idle level
+ * 28 -> 36 unused (software 0) (E)
+ * 29 -> 37 unused (software 1) (E)
+ * 30 -> 38 unused (software 2) - crime 1.5 CPU SysCorError (E)
+ * 31 -> 39 VICE
+ *
+ * S, M, A: Use the MACE ISA interrupt register
+ * MACE_ISA_INT_STAT 31:0
+ *
+ * 0-7 -> 40-47 Audio
+ * 8 -> 48 RTC
+ * 9 -> 49 Keyboard
+ * 10 -> X Keyboard polled
+ * 11 -> 51 Mouse
+ * 12 -> X Mouse polled
+ * 13-15 -> 53-55 Count/compare timers
+ * 16-19 -> 56-59 Parallel (16 E)
+ * 20-25 -> 60-62 Serial 1 (22 E)
+ * 26-31 -> 66-71 Serial 2 (28 E)
+ *
+ * Note that this means IRQs 12-14, 50, and 52 do not exist.  This is a
+ * different IRQ map than IRIX uses, but that's OK as Linux irq handling
+ * is quite different anyway.
+ */
+
+/* Some initial interrupts to set up */
+extern irqreturn_t crime_memerr_intr(int irq, void *dev_id);
+extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
+
+static struct irqaction memerr_irq = {
+	.handler = crime_memerr_intr,
+	.name = "CRIME memory error",
+};
+
+static struct irqaction cpuerr_irq = {
+	.handler = crime_cpuerr_intr,
+	.name = "CRIME CPU error",
+};
+
+/*
+ * This is for pure CRIME interrupts - ie not MACE.  The advantage?
+ * We get to split the register in half and do faster lookups.
+ */
+
+static uint64_t crime_mask;
+
+static inline void crime_enable_irq(struct irq_data *d)
+{
+	unsigned int bit = d->irq - CRIME_IRQ_BASE;
+
+	crime_mask |= 1 << bit;
+	crime->imask = crime_mask;
+}
+
+static inline void crime_disable_irq(struct irq_data *d)
+{
+	unsigned int bit = d->irq - CRIME_IRQ_BASE;
+
+	crime_mask &= ~(1 << bit);
+	crime->imask = crime_mask;
+	flush_crime_bus();
+}
+
+static struct irq_chip crime_level_interrupt = {
+	.name		= "IP32 CRIME",
+	.irq_mask	= crime_disable_irq,
+	.irq_unmask	= crime_enable_irq,
+};
+
+static void crime_edge_mask_and_ack_irq(struct irq_data *d)
+{
+	unsigned int bit = d->irq - CRIME_IRQ_BASE;
+	uint64_t crime_int;
+
+	/* Edge triggered interrupts must be cleared. */
+	crime_int = crime->hard_int;
+	crime_int &= ~(1 << bit);
+	crime->hard_int = crime_int;
+
+	crime_disable_irq(d);
+}
+
+static struct irq_chip crime_edge_interrupt = {
+	.name		= "IP32 CRIME",
+	.irq_ack	= crime_edge_mask_and_ack_irq,
+	.irq_mask	= crime_disable_irq,
+	.irq_mask_ack	= crime_edge_mask_and_ack_irq,
+	.irq_unmask	= crime_enable_irq,
+};
+
+/*
+ * This is for MACE PCI interrupts.  We can decrease bus traffic by masking
+ * as close to the source as possible.	This also means we can take the
+ * next chunk of the CRIME register in one piece.
+ */
+
+static unsigned long macepci_mask;
+
+static void enable_macepci_irq(struct irq_data *d)
+{
+	macepci_mask |= MACEPCI_CONTROL_INT(d->irq - MACEPCI_SCSI0_IRQ);
+	mace->pci.control = macepci_mask;
+	crime_mask |= 1 << (d->irq - CRIME_IRQ_BASE);
+	crime->imask = crime_mask;
+}
+
+static void disable_macepci_irq(struct irq_data *d)
+{
+	crime_mask &= ~(1 << (d->irq - CRIME_IRQ_BASE));
+	crime->imask = crime_mask;
+	flush_crime_bus();
+	macepci_mask &= ~MACEPCI_CONTROL_INT(d->irq - MACEPCI_SCSI0_IRQ);
+	mace->pci.control = macepci_mask;
+	flush_mace_bus();
+}
+
+static struct irq_chip ip32_macepci_interrupt = {
+	.name = "IP32 MACE PCI",
+	.irq_mask = disable_macepci_irq,
+	.irq_unmask = enable_macepci_irq,
+};
+
+/* This is used for MACE ISA interrupts.  That means bits 4-6 in the
+ * CRIME register.
+ */
+
+#define MACEISA_AUDIO_INT	(MACEISA_AUDIO_SW_INT |		\
+				 MACEISA_AUDIO_SC_INT |		\
+				 MACEISA_AUDIO1_DMAT_INT |	\
+				 MACEISA_AUDIO1_OF_INT |	\
+				 MACEISA_AUDIO2_DMAT_INT |	\
+				 MACEISA_AUDIO2_MERR_INT |	\
+				 MACEISA_AUDIO3_DMAT_INT |	\
+				 MACEISA_AUDIO3_MERR_INT)
+#define MACEISA_MISC_INT	(MACEISA_RTC_INT |		\
+				 MACEISA_KEYB_INT |		\
+				 MACEISA_KEYB_POLL_INT |	\
+				 MACEISA_MOUSE_INT |		\
+				 MACEISA_MOUSE_POLL_INT |	\
+				 MACEISA_TIMER0_INT |		\
+				 MACEISA_TIMER1_INT |		\
+				 MACEISA_TIMER2_INT)
+#define MACEISA_SUPERIO_INT	(MACEISA_PARALLEL_INT |		\
+				 MACEISA_PAR_CTXA_INT |		\
+				 MACEISA_PAR_CTXB_INT |		\
+				 MACEISA_PAR_MERR_INT |		\
+				 MACEISA_SERIAL1_INT |		\
+				 MACEISA_SERIAL1_TDMAT_INT |	\
+				 MACEISA_SERIAL1_TDMAPR_INT |	\
+				 MACEISA_SERIAL1_TDMAME_INT |	\
+				 MACEISA_SERIAL1_RDMAT_INT |	\
+				 MACEISA_SERIAL1_RDMAOR_INT |	\
+				 MACEISA_SERIAL2_INT |		\
+				 MACEISA_SERIAL2_TDMAT_INT |	\
+				 MACEISA_SERIAL2_TDMAPR_INT |	\
+				 MACEISA_SERIAL2_TDMAME_INT |	\
+				 MACEISA_SERIAL2_RDMAT_INT |	\
+				 MACEISA_SERIAL2_RDMAOR_INT)
+
+static unsigned long maceisa_mask;
+
+static void enable_maceisa_irq(struct irq_data *d)
+{
+	unsigned int crime_int = 0;
+
+	pr_debug("maceisa enable: %u\n", d->irq);
+
+	switch (d->irq) {
+	case MACEISA_AUDIO_SW_IRQ ... MACEISA_AUDIO3_MERR_IRQ:
+		crime_int = MACE_AUDIO_INT;
+		break;
+	case MACEISA_RTC_IRQ ... MACEISA_TIMER2_IRQ:
+		crime_int = MACE_MISC_INT;
+		break;
+	case MACEISA_PARALLEL_IRQ ... MACEISA_SERIAL2_RDMAOR_IRQ:
+		crime_int = MACE_SUPERIO_INT;
+		break;
+	}
+	pr_debug("crime_int %08x enabled\n", crime_int);
+	crime_mask |= crime_int;
+	crime->imask = crime_mask;
+	maceisa_mask |= 1 << (d->irq - MACEISA_AUDIO_SW_IRQ);
+	mace->perif.ctrl.imask = maceisa_mask;
+}
+
+static void disable_maceisa_irq(struct irq_data *d)
+{
+	unsigned int crime_int = 0;
+
+	maceisa_mask &= ~(1 << (d->irq - MACEISA_AUDIO_SW_IRQ));
+	if (!(maceisa_mask & MACEISA_AUDIO_INT))
+		crime_int |= MACE_AUDIO_INT;
+	if (!(maceisa_mask & MACEISA_MISC_INT))
+		crime_int |= MACE_MISC_INT;
+	if (!(maceisa_mask & MACEISA_SUPERIO_INT))
+		crime_int |= MACE_SUPERIO_INT;
+	crime_mask &= ~crime_int;
+	crime->imask = crime_mask;
+	flush_crime_bus();
+	mace->perif.ctrl.imask = maceisa_mask;
+	flush_mace_bus();
+}
+
+static void mask_and_ack_maceisa_irq(struct irq_data *d)
+{
+	unsigned long mace_int;
+
+	/* edge triggered */
+	mace_int = mace->perif.ctrl.istat;
+	mace_int &= ~(1 << (d->irq - MACEISA_AUDIO_SW_IRQ));
+	mace->perif.ctrl.istat = mace_int;
+
+	disable_maceisa_irq(d);
+}
+
+static struct irq_chip ip32_maceisa_level_interrupt = {
+	.name		= "IP32 MACE ISA",
+	.irq_mask	= disable_maceisa_irq,
+	.irq_unmask	= enable_maceisa_irq,
+};
+
+static struct irq_chip ip32_maceisa_edge_interrupt = {
+	.name		= "IP32 MACE ISA",
+	.irq_ack	= mask_and_ack_maceisa_irq,
+	.irq_mask	= disable_maceisa_irq,
+	.irq_mask_ack	= mask_and_ack_maceisa_irq,
+	.irq_unmask	= enable_maceisa_irq,
+};
+
+/* This is used for regular non-ISA, non-PCI MACE interrupts.  That means
+ * bits 0-3 and 7 in the CRIME register.
+ */
+
+static void enable_mace_irq(struct irq_data *d)
+{
+	unsigned int bit = d->irq - CRIME_IRQ_BASE;
+
+	crime_mask |= (1 << bit);
+	crime->imask = crime_mask;
+}
+
+static void disable_mace_irq(struct irq_data *d)
+{
+	unsigned int bit = d->irq - CRIME_IRQ_BASE;
+
+	crime_mask &= ~(1 << bit);
+	crime->imask = crime_mask;
+	flush_crime_bus();
+}
+
+static struct irq_chip ip32_mace_interrupt = {
+	.name = "IP32 MACE",
+	.irq_mask = disable_mace_irq,
+	.irq_unmask = enable_mace_irq,
+};
+
+static void ip32_unknown_interrupt(void)
+{
+	printk("Unknown interrupt occurred!\n");
+	printk("cp0_status: %08x\n", read_c0_status());
+	printk("cp0_cause: %08x\n", read_c0_cause());
+	printk("CRIME intr mask: %016lx\n", crime->imask);
+	printk("CRIME intr status: %016lx\n", crime->istat);
+	printk("CRIME hardware intr register: %016lx\n", crime->hard_int);
+	printk("MACE ISA intr mask: %08lx\n", mace->perif.ctrl.imask);
+	printk("MACE ISA intr status: %08lx\n", mace->perif.ctrl.istat);
+	printk("MACE PCI control register: %08x\n", mace->pci.control);
+
+	printk("Register dump:\n");
+	show_regs(get_irq_regs());
+
+	printk("Please mail this report to linux-mips@linux-mips.org\n");
+	printk("Spinning...");
+	while(1) ;
+}
+
+/* CRIME 1.1 appears to deliver all interrupts to this one pin. */
+/* change this to loop over all edge-triggered irqs, exception masked out ones */
+static void ip32_irq0(void)
+{
+	uint64_t crime_int;
+	int irq = 0;
+
+	/*
+	 * Sanity check interrupt numbering enum.
+	 * MACE got 32 interrupts and there are 32 MACE ISA interrupts daisy
+	 * chained.
+	 */
+	BUILD_BUG_ON(CRIME_VICE_IRQ - MACE_VID_IN1_IRQ != 31);
+	BUILD_BUG_ON(MACEISA_SERIAL2_RDMAOR_IRQ - MACEISA_AUDIO_SW_IRQ != 31);
+
+	crime_int = crime->istat & crime_mask;
+
+	/* crime sometime delivers spurious interrupts, ignore them */
+	if (unlikely(crime_int == 0))
+		return;
+
+	irq = MACE_VID_IN1_IRQ + __ffs(crime_int);
+
+	if (crime_int & CRIME_MACEISA_INT_MASK) {
+		unsigned long mace_int = mace->perif.ctrl.istat;
+		irq = __ffs(mace_int & maceisa_mask) + MACEISA_AUDIO_SW_IRQ;
+	}
+
+	pr_debug("*irq %u*\n", irq);
+	do_IRQ(irq);
+}
+
+static void ip32_irq1(void)
+{
+	ip32_unknown_interrupt();
+}
+
+static void ip32_irq2(void)
+{
+	ip32_unknown_interrupt();
+}
+
+static void ip32_irq3(void)
+{
+	ip32_unknown_interrupt();
+}
+
+static void ip32_irq4(void)
+{
+	ip32_unknown_interrupt();
+}
+
+static void ip32_irq5(void)
+{
+	do_IRQ(MIPS_CPU_IRQ_BASE + 7);
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause();
+
+	if (likely(pending & IE_IRQ0))
+		ip32_irq0();
+	else if (unlikely(pending & IE_IRQ1))
+		ip32_irq1();
+	else if (unlikely(pending & IE_IRQ2))
+		ip32_irq2();
+	else if (unlikely(pending & IE_IRQ3))
+		ip32_irq3();
+	else if (unlikely(pending & IE_IRQ4))
+		ip32_irq4();
+	else if (likely(pending & IE_IRQ5))
+		ip32_irq5();
+}
+
+void __init arch_init_irq(void)
+{
+	unsigned int irq;
+
+	/* Install our interrupt handler, then clear and disable all
+	 * CRIME and MACE interrupts. */
+	crime->imask = 0;
+	crime->hard_int = 0;
+	crime->soft_int = 0;
+	mace->perif.ctrl.istat = 0;
+	mace->perif.ctrl.imask = 0;
+
+	mips_cpu_irq_init();
+	for (irq = CRIME_IRQ_BASE; irq <= IP32_IRQ_MAX; irq++) {
+		switch (irq) {
+		case MACE_VID_IN1_IRQ ... MACE_PCI_BRIDGE_IRQ:
+			irq_set_chip_and_handler_name(irq,
+						      &ip32_mace_interrupt,
+						      handle_level_irq,
+						      "level");
+			break;
+
+		case MACEPCI_SCSI0_IRQ ...  MACEPCI_SHARED2_IRQ:
+			irq_set_chip_and_handler_name(irq,
+						      &ip32_macepci_interrupt,
+						      handle_level_irq,
+						      "level");
+			break;
+
+		case CRIME_CPUERR_IRQ:
+		case CRIME_MEMERR_IRQ:
+			irq_set_chip_and_handler_name(irq,
+						      &crime_level_interrupt,
+						      handle_level_irq,
+						      "level");
+			break;
+
+		case CRIME_GBE0_IRQ ... CRIME_GBE3_IRQ:
+		case CRIME_RE_EMPTY_E_IRQ ... CRIME_RE_IDLE_E_IRQ:
+		case CRIME_SOFT0_IRQ ... CRIME_SOFT2_IRQ:
+		case CRIME_VICE_IRQ:
+			irq_set_chip_and_handler_name(irq,
+						      &crime_edge_interrupt,
+						      handle_edge_irq,
+						      "edge");
+			break;
+
+		case MACEISA_PARALLEL_IRQ:
+		case MACEISA_SERIAL1_TDMAPR_IRQ:
+		case MACEISA_SERIAL2_TDMAPR_IRQ:
+			irq_set_chip_and_handler_name(irq,
+						      &ip32_maceisa_edge_interrupt,
+						      handle_edge_irq,
+						      "edge");
+			break;
+
+		default:
+			irq_set_chip_and_handler_name(irq,
+						      &ip32_maceisa_level_interrupt,
+						      handle_level_irq,
+						      "level");
+			break;
+		}
+	}
+	setup_irq(CRIME_MEMERR_IRQ, &memerr_irq);
+	setup_irq(CRIME_CPUERR_IRQ, &cpuerr_irq);
+
+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5)
+	change_c0_status(ST0_IM, ALLINTS);
+}
diff --git a/arch/mips/sgi-ip32/ip32-memory.c b/arch/mips/sgi-ip32/ip32-memory.c
new file mode 100644
index 000000000..828ce131c
--- /dev/null
+++ b/arch/mips/sgi-ip32/ip32-memory.c
@@ -0,0 +1,48 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Keith M Wesolowski
+ * Copyright (C) 2005 Ilya A. Volynets (Total Knowledge)
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+
+#include <asm/ip32/crime.h>
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+
+extern void crime_init(void);
+
+void __init prom_meminit(void)
+{
+	u64 base, size;
+	int bank;
+
+	crime_init();
+
+	for (bank=0; bank < CRIME_MAXBANKS; bank++) {
+		u64 bankctl = crime->bank_ctrl[bank];
+		base = (bankctl & CRIME_MEM_BANK_CONTROL_ADDR) << 25;
+		if (bank != 0 && base == 0)
+			continue;
+		size = (bankctl & CRIME_MEM_BANK_CONTROL_SDRAM_SIZE) ? 128 : 32;
+		size <<= 20;
+		if (base + size > (256 << 20))
+			base += CRIME_HI_MEM_BASE;
+
+		printk("CRIME MC: bank %u base 0x%016Lx size %LuMiB\n",
+			bank, base, size >> 20);
+		add_memory_region(base, size, BOOT_MEM_RAM);
+	}
+}
+
+
+void __init prom_free_prom_memory(void)
+{
+}
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
new file mode 100644
index 000000000..5a2a82148
--- /dev/null
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -0,0 +1,138 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/rtc/ds1685.h>
+
+#include <asm/ip32/mace.h>
+#include <asm/ip32/ip32_ints.h>
+
+extern void ip32_prepare_poweroff(void);
+
+#define MACEISA_SERIAL1_OFFS   offsetof(struct sgi_mace, isa.serial1)
+#define MACEISA_SERIAL2_OFFS   offsetof(struct sgi_mace, isa.serial2)
+
+#define MACE_PORT(offset,_irq)						\
+{									\
+	.mapbase	= MACE_BASE + offset,				\
+	.irq		= _irq,						\
+	.uartclk	= 1843200,					\
+	.iotype		= UPIO_MEM,					\
+	.flags		= UPF_SKIP_TEST|UPF_IOREMAP,			\
+	.regshift	= 8,						\
+}
+
+static struct plat_serial8250_port uart8250_data[] = {
+	MACE_PORT(MACEISA_SERIAL1_OFFS, MACEISA_SERIAL1_IRQ),
+	MACE_PORT(MACEISA_SERIAL2_OFFS, MACEISA_SERIAL2_IRQ),
+	{ },
+};
+
+static struct platform_device uart8250_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= uart8250_data,
+	},
+};
+
+static int __init uart8250_init(void)
+{
+	return platform_device_register(&uart8250_device);
+}
+
+device_initcall(uart8250_init);
+
+static __init int meth_devinit(void)
+{
+	struct platform_device *pd;
+	int ret;
+
+	pd = platform_device_alloc("meth", -1);
+	if (!pd)
+		return -ENOMEM;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		platform_device_put(pd);
+
+	return ret;
+}
+
+device_initcall(meth_devinit);
+
+static __init int sgio2audio_devinit(void)
+{
+	struct platform_device *pd;
+	int ret;
+
+	pd = platform_device_alloc("sgio2audio", -1);
+	if (!pd)
+		return -ENOMEM;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		platform_device_put(pd);
+
+	return ret;
+}
+
+device_initcall(sgio2audio_devinit);
+
+static __init int sgio2btns_devinit(void)
+{
+	return IS_ERR(platform_device_register_simple("sgibtns", -1, NULL, 0));
+}
+
+device_initcall(sgio2btns_devinit);
+
+#define MACE_RTC_RES_START (MACE_BASE + offsetof(struct sgi_mace, isa.rtc))
+#define MACE_RTC_RES_END (MACE_RTC_RES_START + 32767)
+
+static struct resource ip32_rtc_resources[] = {
+	{
+		.start	= MACEISA_RTC_IRQ,
+		.end	= MACEISA_RTC_IRQ,
+		.flags	= IORESOURCE_IRQ
+	}, {
+		.start	= MACE_RTC_RES_START,
+		.end	= MACE_RTC_RES_END,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+/* RTC registers on IP32 are each padded by 256 bytes (0x100). */
+static struct ds1685_rtc_platform_data
+ip32_rtc_platform_data[] = {
+	{
+		.regstep = 0x100,
+		.bcd_mode = true,
+		.no_irq = false,
+		.uie_unsupported = false,
+		.alloc_io_resources = true,
+		.plat_prepare_poweroff = ip32_prepare_poweroff,
+	},
+};
+
+struct platform_device ip32_rtc_device = {
+	.name			= "rtc-ds1685",
+	.id			= -1,
+	.dev			= {
+		.platform_data	= ip32_rtc_platform_data,
+	},
+	.num_resources		= ARRAY_SIZE(ip32_rtc_resources),
+	.resource		= ip32_rtc_resources,
+};
+
+static __init int sgio2_rtc_devinit(void)
+{
+	return platform_device_register(&ip32_rtc_device);
+}
+
+device_initcall(sgio2_rtc_devinit);
diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c
new file mode 100644
index 000000000..20d863734
--- /dev/null
+++ b/arch/mips/sgi-ip32/ip32-reset.c
@@ -0,0 +1,152 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 Keith M Wesolowski
+ * Copyright (C) 2001 Paul Mundt
+ * Copyright (C) 2003 Guido Guenther <agx@sigxcpu.org>
+ */
+
+#include <linux/compiler.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/sched/signal.h>
+#include <linux/notifier.h>
+#include <linux/delay.h>
+#include <linux/rtc/ds1685.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+
+#include <asm/addrspace.h>
+#include <asm/irq.h>
+#include <asm/reboot.h>
+#include <asm/wbflush.h>
+#include <asm/ip32/mace.h>
+#include <asm/ip32/crime.h>
+#include <asm/ip32/ip32_ints.h>
+
+#define POWERDOWN_TIMEOUT	120
+/*
+ * Blink frequency during reboot grace period and when panicked.
+ */
+#define POWERDOWN_FREQ		(HZ / 4)
+#define PANIC_FREQ		(HZ / 8)
+
+extern struct platform_device ip32_rtc_device;
+
+static struct timer_list power_timer, blink_timer;
+static unsigned long blink_timer_timeout;
+static int has_panicked, shutting_down;
+
+static __noreturn void ip32_poweroff(void *data)
+{
+	void (*poweroff_func)(struct platform_device *) =
+		symbol_get(ds1685_rtc_poweroff);
+
+#ifdef CONFIG_MODULES
+	/* If the first __symbol_get failed, our module wasn't loaded. */
+	if (!poweroff_func) {
+		request_module("rtc-ds1685");
+		poweroff_func = symbol_get(ds1685_rtc_poweroff);
+	}
+#endif
+
+	if (!poweroff_func)
+		pr_emerg("RTC not available for power-off.  Spinning forever ...\n");
+	else {
+		(*poweroff_func)((struct platform_device *)data);
+		symbol_put(ds1685_rtc_poweroff);
+	}
+
+	unreachable();
+}
+
+static void ip32_machine_restart(char *cmd) __noreturn;
+static void ip32_machine_restart(char *cmd)
+{
+	msleep(20);
+	crime->control = CRIME_CONTROL_HARD_RESET;
+	unreachable();
+}
+
+static void blink_timeout(struct timer_list *unused)
+{
+	unsigned long led = mace->perif.ctrl.misc ^ MACEISA_LED_RED;
+	mace->perif.ctrl.misc = led;
+	mod_timer(&blink_timer, jiffies + blink_timer_timeout);
+}
+
+static void ip32_machine_halt(void)
+{
+	ip32_poweroff(&ip32_rtc_device);
+}
+
+static void power_timeout(struct timer_list *unused)
+{
+	ip32_poweroff(&ip32_rtc_device);
+}
+
+void ip32_prepare_poweroff(void)
+{
+	if (has_panicked)
+		return;
+
+	if (shutting_down || kill_cad_pid(SIGINT, 1)) {
+		/* No init process or button pressed twice.  */
+		ip32_poweroff(&ip32_rtc_device);
+	}
+
+	shutting_down = 1;
+	blink_timer_timeout = POWERDOWN_FREQ;
+	blink_timeout(&blink_timer);
+
+	timer_setup(&power_timer, power_timeout, 0);
+	power_timer.expires = jiffies + POWERDOWN_TIMEOUT * HZ;
+	add_timer(&power_timer);
+}
+
+static int panic_event(struct notifier_block *this, unsigned long event,
+		       void *ptr)
+{
+	unsigned long led;
+
+	if (has_panicked)
+		return NOTIFY_DONE;
+	has_panicked = 1;
+
+	/* turn off the green LED */
+	led = mace->perif.ctrl.misc | MACEISA_LED_GREEN;
+	mace->perif.ctrl.misc = led;
+
+	blink_timer_timeout = PANIC_FREQ;
+	blink_timeout(&blink_timer);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block panic_block = {
+	.notifier_call = panic_event,
+};
+
+static __init int ip32_reboot_setup(void)
+{
+	/* turn on the green led only */
+	unsigned long led = mace->perif.ctrl.misc;
+	led |= MACEISA_LED_RED;
+	led &= ~MACEISA_LED_GREEN;
+	mace->perif.ctrl.misc = led;
+
+	_machine_restart = ip32_machine_restart;
+	_machine_halt = ip32_machine_halt;
+	pm_power_off = ip32_machine_halt;
+
+	timer_setup(&blink_timer, blink_timeout, 0);
+	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
+
+	return 0;
+}
+
+subsys_initcall(ip32_reboot_setup);
diff --git a/arch/mips/sgi-ip32/ip32-setup.c b/arch/mips/sgi-ip32/ip32-setup.c
new file mode 100644
index 000000000..3abd1465e
--- /dev/null
+++ b/arch/mips/sgi-ip32/ip32-setup.c
@@ -0,0 +1,102 @@
+/*
+ * IP32 basic setup
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000 Harald Koerfgen
+ * Copyright (C) 2002, 2003, 2005 Ilya A. Volynets
+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/param.h>
+#include <linux/sched.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mc146818-time.h>
+#include <asm/mipsregs.h>
+#include <asm/mmu_context.h>
+#include <asm/sgialib.h>
+#include <asm/time.h>
+#include <asm/traps.h>
+#include <asm/io.h>
+#include <asm/ip32/crime.h>
+#include <asm/ip32/mace.h>
+#include <asm/ip32/ip32_ints.h>
+
+extern void ip32_be_init(void);
+extern void crime_init(void);
+
+#ifdef CONFIG_SGI_O2MACE_ETH
+/*
+ * This is taken care of in here 'cause they say using Arc later on is
+ * problematic
+ */
+extern char o2meth_eaddr[8];
+static inline unsigned char str2hexnum(unsigned char c)
+{
+	if (c >= '0' && c <= '9')
+		return c - '0';
+	if (c >= 'a' && c <= 'f')
+		return c - 'a' + 10;
+	return 0; /* foo */
+}
+
+static inline void str2eaddr(unsigned char *ea, unsigned char *str)
+{
+	int i;
+
+	for (i = 0; i < 6; i++) {
+		unsigned char num;
+
+		if(*str == ':')
+			str++;
+		num = str2hexnum(*str++) << 4;
+		num |= (str2hexnum(*str++));
+		ea[i] = num;
+	}
+}
+#endif
+
+/* An arbitrary time; this can be decreased if reliability looks good */
+#define WAIT_MS 10
+
+void __init plat_time_init(void)
+{
+	printk(KERN_INFO "Calibrating system timer... ");
+	write_c0_count(0);
+	crime->timer = 0;
+	while (crime->timer < CRIME_MASTER_FREQ * WAIT_MS / 1000) ;
+	mips_hpt_frequency = read_c0_count() * 1000 / WAIT_MS;
+	printk("%d MHz CPU detected\n", mips_hpt_frequency * 2 / 1000000);
+}
+
+void __init plat_mem_setup(void)
+{
+	board_be_init = ip32_be_init;
+
+#ifdef CONFIG_SGI_O2MACE_ETH
+	{
+		char *mac = ArcGetEnvironmentVariable("eaddr");
+		str2eaddr(o2meth_eaddr, mac);
+	}
+#endif
+
+#if defined(CONFIG_SERIAL_CORE_CONSOLE)
+	{
+		char* con = ArcGetEnvironmentVariable("console");
+		if (con && *con == 'd') {
+			static char options[8] __initdata;
+			char *baud = ArcGetEnvironmentVariable("dbaud");
+			if (baud)
+				strcpy(options, baud);
+			add_preferred_console("ttyS", *(con + 1) == '2' ? 1 : 0,
+					      baud ? options : NULL);
+		}
+	}
+#endif
+}