Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 789 insertions, 0 deletions

diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
new file mode 100644
index 000000000..f5b1ea2d6
--- /dev/null
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -0,0 +1,789 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * General Purpose functions for the global management of the
+ * Communication Processor Module.
+ * Copyright (c) 1997 Dan error_act (dmalek@jlc.net)
+ *
+ * In addition to the individual control of the communication
+ * channels, there are a few functions that globally affect the
+ * communication processor.
+ *
+ * Buffer descriptors must be allocated from the dual ported memory
+ * space.  The allocator for that is here.  When the communication
+ * process is reset, we reclaim the memory available.  There is
+ * currently no deallocator for this memory.
+ * The amount of space available is platform dependent.  On the
+ * MBX, the EPPC software loads additional microcode into the
+ * communication processor, and uses some of the DP ram for this
+ * purpose.  Current, the first 512 bytes and the last 256 bytes of
+ * memory are used.  Right now I am conservative and only use the
+ * memory that can never be used for microcode.  If there are
+ * applications that require more DP ram, we can expand the boundaries
+ * but then we have to be careful of any downloaded microcode.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/8xx_immap.h>
+#include <asm/cpm1.h>
+#include <asm/io.h>
+#include <asm/rheap.h>
+#include <asm/prom.h>
+#include <asm/cpm.h>
+
+#include <asm/fs_pd.h>
+
+#ifdef CONFIG_8xx_GPIO
+#include <linux/of_gpio.h>
+#endif
+
+#define CPM_MAP_SIZE    (0x4000)
+
+cpm8xx_t __iomem *cpmp;  /* Pointer to comm processor space */
+immap_t __iomem *mpc8xx_immr;
+static cpic8xx_t __iomem *cpic_reg;
+
+static struct irq_domain *cpm_pic_host;
+
+static void cpm_mask_irq(struct irq_data *d)
+{
+	unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);
+
+	clrbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec));
+}
+
+static void cpm_unmask_irq(struct irq_data *d)
+{
+	unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);
+
+	setbits32(&cpic_reg->cpic_cimr, (1 << cpm_vec));
+}
+
+static void cpm_end_irq(struct irq_data *d)
+{
+	unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);
+
+	out_be32(&cpic_reg->cpic_cisr, (1 << cpm_vec));
+}
+
+static struct irq_chip cpm_pic = {
+	.name = "CPM PIC",
+	.irq_mask = cpm_mask_irq,
+	.irq_unmask = cpm_unmask_irq,
+	.irq_eoi = cpm_end_irq,
+};
+
+int cpm_get_irq(void)
+{
+	int cpm_vec;
+
+	/* Get the vector by setting the ACK bit and then reading
+	 * the register.
+	 */
+	out_be16(&cpic_reg->cpic_civr, 1);
+	cpm_vec = in_be16(&cpic_reg->cpic_civr);
+	cpm_vec >>= 11;
+
+	return irq_linear_revmap(cpm_pic_host, cpm_vec);
+}
+
+static int cpm_pic_host_map(struct irq_domain *h, unsigned int virq,
+			  irq_hw_number_t hw)
+{
+	pr_debug("cpm_pic_host_map(%d, 0x%lx)\n", virq, hw);
+
+	irq_set_status_flags(virq, IRQ_LEVEL);
+	irq_set_chip_and_handler(virq, &cpm_pic, handle_fasteoi_irq);
+	return 0;
+}
+
+/* The CPM can generate the error interrupt when there is a race condition
+ * between generating and masking interrupts.  All we have to do is ACK it
+ * and return.  This is a no-op function so we don't need any special
+ * tests in the interrupt handler.
+ */
+static irqreturn_t cpm_error_interrupt(int irq, void *dev)
+{
+	return IRQ_HANDLED;
+}
+
+static struct irqaction cpm_error_irqaction = {
+	.handler = cpm_error_interrupt,
+	.flags = IRQF_NO_THREAD,
+	.name = "error",
+};
+
+static const struct irq_domain_ops cpm_pic_host_ops = {
+	.map = cpm_pic_host_map,
+};
+
+unsigned int cpm_pic_init(void)
+{
+	struct device_node *np = NULL;
+	struct resource res;
+	unsigned int sirq = 0, hwirq, eirq;
+	int ret;
+
+	pr_debug("cpm_pic_init\n");
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,cpm1-pic");
+	if (np == NULL)
+		np = of_find_compatible_node(NULL, "cpm-pic", "CPM");
+	if (np == NULL) {
+		printk(KERN_ERR "CPM PIC init: can not find cpm-pic node\n");
+		return sirq;
+	}
+
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret)
+		goto end;
+
+	cpic_reg = ioremap(res.start, resource_size(&res));
+	if (cpic_reg == NULL)
+		goto end;
+
+	sirq = irq_of_parse_and_map(np, 0);
+	if (!sirq)
+		goto end;
+
+	/* Initialize the CPM interrupt controller. */
+	hwirq = (unsigned int)virq_to_hw(sirq);
+	out_be32(&cpic_reg->cpic_cicr,
+	    (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
+		((hwirq/2) << 13) | CICR_HP_MASK);
+
+	out_be32(&cpic_reg->cpic_cimr, 0);
+
+	cpm_pic_host = irq_domain_add_linear(np, 64, &cpm_pic_host_ops, NULL);
+	if (cpm_pic_host == NULL) {
+		printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
+		sirq = 0;
+		goto end;
+	}
+
+	/* Install our own error handler. */
+	np = of_find_compatible_node(NULL, NULL, "fsl,cpm1");
+	if (np == NULL)
+		np = of_find_node_by_type(NULL, "cpm");
+	if (np == NULL) {
+		printk(KERN_ERR "CPM PIC init: can not find cpm node\n");
+		goto end;
+	}
+
+	eirq = irq_of_parse_and_map(np, 0);
+	if (!eirq)
+		goto end;
+
+	if (setup_irq(eirq, &cpm_error_irqaction))
+		printk(KERN_ERR "Could not allocate CPM error IRQ!");
+
+	setbits32(&cpic_reg->cpic_cicr, CICR_IEN);
+
+end:
+	of_node_put(np);
+	return sirq;
+}
+
+void __init cpm_reset(void)
+{
+	sysconf8xx_t __iomem *siu_conf;
+
+	mpc8xx_immr = ioremap(get_immrbase(), 0x4000);
+	if (!mpc8xx_immr) {
+		printk(KERN_CRIT "Could not map IMMR\n");
+		return;
+	}
+
+	cpmp = &mpc8xx_immr->im_cpm;
+
+#ifndef CONFIG_PPC_EARLY_DEBUG_CPM
+	/* Perform a reset.
+	*/
+	out_be16(&cpmp->cp_cpcr, CPM_CR_RST | CPM_CR_FLG);
+
+	/* Wait for it.
+	*/
+	while (in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG);
+#endif
+
+#ifdef CONFIG_UCODE_PATCH
+	cpm_load_patch(cpmp);
+#endif
+
+	/* Set SDMA Bus Request priority 5.
+	 * On 860T, this also enables FEC priority 6.  I am not sure
+	 * this is what we really want for some applications, but the
+	 * manual recommends it.
+	 * Bit 25, FAM can also be set to use FEC aggressive mode (860T).
+	 */
+	siu_conf = immr_map(im_siu_conf);
+	if ((mfspr(SPRN_IMMR) & 0xffff) == 0x0900) /* MPC885 */
+		out_be32(&siu_conf->sc_sdcr, 0x40);
+	else
+		out_be32(&siu_conf->sc_sdcr, 1);
+	immr_unmap(siu_conf);
+}
+
+static DEFINE_SPINLOCK(cmd_lock);
+
+#define MAX_CR_CMD_LOOPS        10000
+
+int cpm_command(u32 command, u8 opcode)
+{
+	int i, ret;
+	unsigned long flags;
+
+	if (command & 0xffffff0f)
+		return -EINVAL;
+
+	spin_lock_irqsave(&cmd_lock, flags);
+
+	ret = 0;
+	out_be16(&cpmp->cp_cpcr, command | CPM_CR_FLG | (opcode << 8));
+	for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
+		if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
+			goto out;
+
+	printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
+	ret = -EIO;
+out:
+	spin_unlock_irqrestore(&cmd_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(cpm_command);
+
+/* Set a baud rate generator.  This needs lots of work.  There are
+ * four BRGs, any of which can be wired to any channel.
+ * The internal baud rate clock is the system clock divided by 16.
+ * This assumes the baudrate is 16x oversampled by the uart.
+ */
+#define BRG_INT_CLK		(get_brgfreq())
+#define BRG_UART_CLK		(BRG_INT_CLK/16)
+#define BRG_UART_CLK_DIV16	(BRG_UART_CLK/16)
+
+void
+cpm_setbrg(uint brg, uint rate)
+{
+	u32 __iomem *bp;
+
+	/* This is good enough to get SMCs running.....
+	*/
+	bp = &cpmp->cp_brgc1;
+	bp += brg;
+	/* The BRG has a 12-bit counter.  For really slow baud rates (or
+	 * really fast processors), we may have to further divide by 16.
+	 */
+	if (((BRG_UART_CLK / rate) - 1) < 4096)
+		out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
+	else
+		out_be32(bp, (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) |
+			      CPM_BRG_EN | CPM_BRG_DIV16);
+}
+EXPORT_SYMBOL(cpm_setbrg);
+
+struct cpm_ioport16 {
+	__be16 dir, par, odr_sor, dat, intr;
+	__be16 res[3];
+};
+
+struct cpm_ioport32b {
+	__be32 dir, par, odr, dat;
+};
+
+struct cpm_ioport32e {
+	__be32 dir, par, sor, odr, dat;
+};
+
+static void cpm1_set_pin32(int port, int pin, int flags)
+{
+	struct cpm_ioport32e __iomem *iop;
+	pin = 1 << (31 - pin);
+
+	if (port == CPM_PORTB)
+		iop = (struct cpm_ioport32e __iomem *)
+		      &mpc8xx_immr->im_cpm.cp_pbdir;
+	else
+		iop = (struct cpm_ioport32e __iomem *)
+		      &mpc8xx_immr->im_cpm.cp_pedir;
+
+	if (flags & CPM_PIN_OUTPUT)
+		setbits32(&iop->dir, pin);
+	else
+		clrbits32(&iop->dir, pin);
+
+	if (!(flags & CPM_PIN_GPIO))
+		setbits32(&iop->par, pin);
+	else
+		clrbits32(&iop->par, pin);
+
+	if (port == CPM_PORTB) {
+		if (flags & CPM_PIN_OPENDRAIN)
+			setbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
+		else
+			clrbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
+	}
+
+	if (port == CPM_PORTE) {
+		if (flags & CPM_PIN_SECONDARY)
+			setbits32(&iop->sor, pin);
+		else
+			clrbits32(&iop->sor, pin);
+
+		if (flags & CPM_PIN_OPENDRAIN)
+			setbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
+		else
+			clrbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
+	}
+}
+
+static void cpm1_set_pin16(int port, int pin, int flags)
+{
+	struct cpm_ioport16 __iomem *iop =
+		(struct cpm_ioport16 __iomem *)&mpc8xx_immr->im_ioport;
+
+	pin = 1 << (15 - pin);
+
+	if (port != 0)
+		iop += port - 1;
+
+	if (flags & CPM_PIN_OUTPUT)
+		setbits16(&iop->dir, pin);
+	else
+		clrbits16(&iop->dir, pin);
+
+	if (!(flags & CPM_PIN_GPIO))
+		setbits16(&iop->par, pin);
+	else
+		clrbits16(&iop->par, pin);
+
+	if (port == CPM_PORTA) {
+		if (flags & CPM_PIN_OPENDRAIN)
+			setbits16(&iop->odr_sor, pin);
+		else
+			clrbits16(&iop->odr_sor, pin);
+	}
+	if (port == CPM_PORTC) {
+		if (flags & CPM_PIN_SECONDARY)
+			setbits16(&iop->odr_sor, pin);
+		else
+			clrbits16(&iop->odr_sor, pin);
+		if (flags & CPM_PIN_FALLEDGE)
+			setbits16(&iop->intr, pin);
+		else
+			clrbits16(&iop->intr, pin);
+	}
+}
+
+void cpm1_set_pin(enum cpm_port port, int pin, int flags)
+{
+	if (port == CPM_PORTB || port == CPM_PORTE)
+		cpm1_set_pin32(port, pin, flags);
+	else
+		cpm1_set_pin16(port, pin, flags);
+}
+
+int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
+{
+	int shift;
+	int i, bits = 0;
+	u32 __iomem *reg;
+	u32 mask = 7;
+
+	u8 clk_map[][3] = {
+		{CPM_CLK_SCC1, CPM_BRG1, 0},
+		{CPM_CLK_SCC1, CPM_BRG2, 1},
+		{CPM_CLK_SCC1, CPM_BRG3, 2},
+		{CPM_CLK_SCC1, CPM_BRG4, 3},
+		{CPM_CLK_SCC1, CPM_CLK1, 4},
+		{CPM_CLK_SCC1, CPM_CLK2, 5},
+		{CPM_CLK_SCC1, CPM_CLK3, 6},
+		{CPM_CLK_SCC1, CPM_CLK4, 7},
+
+		{CPM_CLK_SCC2, CPM_BRG1, 0},
+		{CPM_CLK_SCC2, CPM_BRG2, 1},
+		{CPM_CLK_SCC2, CPM_BRG3, 2},
+		{CPM_CLK_SCC2, CPM_BRG4, 3},
+		{CPM_CLK_SCC2, CPM_CLK1, 4},
+		{CPM_CLK_SCC2, CPM_CLK2, 5},
+		{CPM_CLK_SCC2, CPM_CLK3, 6},
+		{CPM_CLK_SCC2, CPM_CLK4, 7},
+
+		{CPM_CLK_SCC3, CPM_BRG1, 0},
+		{CPM_CLK_SCC3, CPM_BRG2, 1},
+		{CPM_CLK_SCC3, CPM_BRG3, 2},
+		{CPM_CLK_SCC3, CPM_BRG4, 3},
+		{CPM_CLK_SCC3, CPM_CLK5, 4},
+		{CPM_CLK_SCC3, CPM_CLK6, 5},
+		{CPM_CLK_SCC3, CPM_CLK7, 6},
+		{CPM_CLK_SCC3, CPM_CLK8, 7},
+
+		{CPM_CLK_SCC4, CPM_BRG1, 0},
+		{CPM_CLK_SCC4, CPM_BRG2, 1},
+		{CPM_CLK_SCC4, CPM_BRG3, 2},
+		{CPM_CLK_SCC4, CPM_BRG4, 3},
+		{CPM_CLK_SCC4, CPM_CLK5, 4},
+		{CPM_CLK_SCC4, CPM_CLK6, 5},
+		{CPM_CLK_SCC4, CPM_CLK7, 6},
+		{CPM_CLK_SCC4, CPM_CLK8, 7},
+
+		{CPM_CLK_SMC1, CPM_BRG1, 0},
+		{CPM_CLK_SMC1, CPM_BRG2, 1},
+		{CPM_CLK_SMC1, CPM_BRG3, 2},
+		{CPM_CLK_SMC1, CPM_BRG4, 3},
+		{CPM_CLK_SMC1, CPM_CLK1, 4},
+		{CPM_CLK_SMC1, CPM_CLK2, 5},
+		{CPM_CLK_SMC1, CPM_CLK3, 6},
+		{CPM_CLK_SMC1, CPM_CLK4, 7},
+
+		{CPM_CLK_SMC2, CPM_BRG1, 0},
+		{CPM_CLK_SMC2, CPM_BRG2, 1},
+		{CPM_CLK_SMC2, CPM_BRG3, 2},
+		{CPM_CLK_SMC2, CPM_BRG4, 3},
+		{CPM_CLK_SMC2, CPM_CLK5, 4},
+		{CPM_CLK_SMC2, CPM_CLK6, 5},
+		{CPM_CLK_SMC2, CPM_CLK7, 6},
+		{CPM_CLK_SMC2, CPM_CLK8, 7},
+	};
+
+	switch (target) {
+	case CPM_CLK_SCC1:
+		reg = &mpc8xx_immr->im_cpm.cp_sicr;
+		shift = 0;
+		break;
+
+	case CPM_CLK_SCC2:
+		reg = &mpc8xx_immr->im_cpm.cp_sicr;
+		shift = 8;
+		break;
+
+	case CPM_CLK_SCC3:
+		reg = &mpc8xx_immr->im_cpm.cp_sicr;
+		shift = 16;
+		break;
+
+	case CPM_CLK_SCC4:
+		reg = &mpc8xx_immr->im_cpm.cp_sicr;
+		shift = 24;
+		break;
+
+	case CPM_CLK_SMC1:
+		reg = &mpc8xx_immr->im_cpm.cp_simode;
+		shift = 12;
+		break;
+
+	case CPM_CLK_SMC2:
+		reg = &mpc8xx_immr->im_cpm.cp_simode;
+		shift = 28;
+		break;
+
+	default:
+		printk(KERN_ERR "cpm1_clock_setup: invalid clock target\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
+		if (clk_map[i][0] == target && clk_map[i][1] == clock) {
+			bits = clk_map[i][2];
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(clk_map)) {
+		printk(KERN_ERR "cpm1_clock_setup: invalid clock combination\n");
+		return -EINVAL;
+	}
+
+	bits <<= shift;
+	mask <<= shift;
+
+	if (reg == &mpc8xx_immr->im_cpm.cp_sicr) {
+		if (mode == CPM_CLK_RTX) {
+			bits |= bits << 3;
+			mask |= mask << 3;
+		} else if (mode == CPM_CLK_RX) {
+			bits <<= 3;
+			mask <<= 3;
+		}
+	}
+
+	out_be32(reg, (in_be32(reg) & ~mask) | bits);
+
+	return 0;
+}
+
+/*
+ * GPIO LIB API implementation
+ */
+#ifdef CONFIG_8xx_GPIO
+
+struct cpm1_gpio16_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u16 cpdata;
+
+	/* IRQ associated with Pins when relevant */
+	int irq[16];
+};
+
+static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm1_gpio16_chip *cpm1_gc =
+		container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+
+	cpm1_gc->cpdata = in_be16(&iop->dat);
+}
+
+static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	u16 pin_mask;
+
+	pin_mask = 1 << (15 - gpio);
+
+	return !!(in_be16(&iop->dat) & pin_mask);
+}
+
+static void __cpm1_gpio16_set(struct of_mm_gpio_chip *mm_gc, u16 pin_mask,
+	int value)
+{
+	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+
+	if (value)
+		cpm1_gc->cpdata |= pin_mask;
+	else
+		cpm1_gc->cpdata &= ~pin_mask;
+
+	out_be16(&iop->dat, cpm1_gc->cpdata);
+}
+
+static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+	unsigned long flags;
+	u16 pin_mask = 1 << (15 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	__cpm1_gpio16_set(mm_gc, pin_mask, value);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio16_to_irq(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+
+	return cpm1_gc->irq[gpio] ? : -ENXIO;
+}
+
+static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u16 pin_mask = 1 << (15 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	setbits16(&iop->dir, pin_mask);
+	__cpm1_gpio16_set(mm_gc, pin_mask, val);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+
+	return 0;
+}
+
+static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u16 pin_mask = 1 << (15 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	clrbits16(&iop->dir, pin_mask);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+
+	return 0;
+}
+
+int cpm1_gpiochip_add16(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct cpm1_gpio16_chip *cpm1_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct gpio_chip *gc;
+	u16 mask;
+
+	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+	if (!cpm1_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm1_gc->lock);
+
+	if (!of_property_read_u16(np, "fsl,cpm1-gpio-irq-mask", &mask)) {
+		int i, j;
+
+		for (i = 0, j = 0; i < 16; i++)
+			if (mask & (1 << (15 - i)))
+				cpm1_gc->irq[i] = irq_of_parse_and_map(np, j++);
+	}
+
+	mm_gc = &cpm1_gc->mm_gc;
+	gc = &mm_gc->gc;
+
+	mm_gc->save_regs = cpm1_gpio16_save_regs;
+	gc->ngpio = 16;
+	gc->direction_input = cpm1_gpio16_dir_in;
+	gc->direction_output = cpm1_gpio16_dir_out;
+	gc->get = cpm1_gpio16_get;
+	gc->set = cpm1_gpio16_set;
+	gc->to_irq = cpm1_gpio16_to_irq;
+	gc->parent = dev;
+	gc->owner = THIS_MODULE;
+
+	return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc);
+}
+
+struct cpm1_gpio32_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u32 cpdata;
+};
+
+static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm1_gpio32_chip *cpm1_gc =
+		container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+
+	cpm1_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void __cpm1_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
+	int value)
+{
+	struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+
+	if (value)
+		cpm1_gc->cpdata |= pin_mask;
+	else
+		cpm1_gc->cpdata &= ~pin_mask;
+
+	out_be32(&iop->dat, cpm1_gc->cpdata);
+}
+
+static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	__cpm1_gpio32_set(mm_gc, pin_mask, value);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	setbits32(&iop->dir, pin_mask);
+	__cpm1_gpio32_set(mm_gc, pin_mask, val);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+
+	return 0;
+}
+
+static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	clrbits32(&iop->dir, pin_mask);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+
+	return 0;
+}
+
+int cpm1_gpiochip_add32(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct cpm1_gpio32_chip *cpm1_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct gpio_chip *gc;
+
+	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+	if (!cpm1_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm1_gc->lock);
+
+	mm_gc = &cpm1_gc->mm_gc;
+	gc = &mm_gc->gc;
+
+	mm_gc->save_regs = cpm1_gpio32_save_regs;
+	gc->ngpio = 32;
+	gc->direction_input = cpm1_gpio32_dir_in;
+	gc->direction_output = cpm1_gpio32_dir_out;
+	gc->get = cpm1_gpio32_get;
+	gc->set = cpm1_gpio32_set;
+	gc->parent = dev;
+	gc->owner = THIS_MODULE;
+
+	return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc);
+}
+
+#endif /* CONFIG_8xx_GPIO */