Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 301 insertions, 0 deletions

diff --git a/arch/riscv/include/asm/io.h b/arch/riscv/include/asm/io.h
new file mode 100644
index 000000000..b269451e7
--- /dev/null
+++ b/arch/riscv/include/asm/io.h
@@ -0,0 +1,301 @@
+/*
+ * {read,write}{b,w,l,q} based on arch/arm64/include/asm/io.h
+ *   which was based on arch/arm/include/io.h
+ *
+ * Copyright (C) 1996-2000 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ * Copyright (C) 2014 Regents of the University of California
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ */
+
+#ifndef _ASM_RISCV_IO_H
+#define _ASM_RISCV_IO_H
+
+#include <linux/types.h>
+
+extern void __iomem *ioremap(phys_addr_t offset, unsigned long size);
+
+/*
+ * The RISC-V ISA doesn't yet specify how to query or modify PMAs, so we can't
+ * change the properties of memory regions.  This should be fixed by the
+ * upcoming platform spec.
+ */
+#define ioremap_nocache(addr, size) ioremap((addr), (size))
+#define ioremap_wc(addr, size) ioremap((addr), (size))
+#define ioremap_wt(addr, size) ioremap((addr), (size))
+
+extern void iounmap(volatile void __iomem *addr);
+
+/* Generic IO read/write.  These perform native-endian accesses. */
+#define __raw_writeb __raw_writeb
+static inline void __raw_writeb(u8 val, volatile void __iomem *addr)
+{
+	asm volatile("sb %0, 0(%1)" : : "r" (val), "r" (addr));
+}
+
+#define __raw_writew __raw_writew
+static inline void __raw_writew(u16 val, volatile void __iomem *addr)
+{
+	asm volatile("sh %0, 0(%1)" : : "r" (val), "r" (addr));
+}
+
+#define __raw_writel __raw_writel
+static inline void __raw_writel(u32 val, volatile void __iomem *addr)
+{
+	asm volatile("sw %0, 0(%1)" : : "r" (val), "r" (addr));
+}
+
+#ifdef CONFIG_64BIT
+#define __raw_writeq __raw_writeq
+static inline void __raw_writeq(u64 val, volatile void __iomem *addr)
+{
+	asm volatile("sd %0, 0(%1)" : : "r" (val), "r" (addr));
+}
+#endif
+
+#define __raw_readb __raw_readb
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	u8 val;
+
+	asm volatile("lb %0, 0(%1)" : "=r" (val) : "r" (addr));
+	return val;
+}
+
+#define __raw_readw __raw_readw
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	u16 val;
+
+	asm volatile("lh %0, 0(%1)" : "=r" (val) : "r" (addr));
+	return val;
+}
+
+#define __raw_readl __raw_readl
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	u32 val;
+
+	asm volatile("lw %0, 0(%1)" : "=r" (val) : "r" (addr));
+	return val;
+}
+
+#ifdef CONFIG_64BIT
+#define __raw_readq __raw_readq
+static inline u64 __raw_readq(const volatile void __iomem *addr)
+{
+	u64 val;
+
+	asm volatile("ld %0, 0(%1)" : "=r" (val) : "r" (addr));
+	return val;
+}
+#endif
+
+/*
+ * FIXME: I'm flip-flopping on whether or not we should keep this or enforce
+ * the ordering with I/O on spinlocks like PowerPC does.  The worry is that
+ * drivers won't get this correct, but I also don't want to introduce a fence
+ * into the lock code that otherwise only uses AMOs (and is essentially defined
+ * by the ISA to be correct).   For now I'm leaving this here: "o,w" is
+ * sufficient to ensure that all writes to the device have completed before the
+ * write to the spinlock is allowed to commit.  I surmised this from reading
+ * "ACQUIRES VS I/O ACCESSES" in memory-barriers.txt.
+ */
+#define mmiowb()	__asm__ __volatile__ ("fence o,w" : : : "memory");
+
+/*
+ * Unordered I/O memory access primitives.  These are even more relaxed than
+ * the relaxed versions, as they don't even order accesses between successive
+ * operations to the I/O regions.
+ */
+#define readb_cpu(c)		({ u8  __r = __raw_readb(c); __r; })
+#define readw_cpu(c)		({ u16 __r = le16_to_cpu((__force __le16)__raw_readw(c)); __r; })
+#define readl_cpu(c)		({ u32 __r = le32_to_cpu((__force __le32)__raw_readl(c)); __r; })
+
+#define writeb_cpu(v,c)		((void)__raw_writeb((v),(c)))
+#define writew_cpu(v,c)		((void)__raw_writew((__force u16)cpu_to_le16(v),(c)))
+#define writel_cpu(v,c)		((void)__raw_writel((__force u32)cpu_to_le32(v),(c)))
+
+#ifdef CONFIG_64BIT
+#define readq_cpu(c)		({ u64 __r = le64_to_cpu((__force __le64)__raw_readq(c)); __r; })
+#define writeq_cpu(v,c)		((void)__raw_writeq((__force u64)cpu_to_le64(v),(c)))
+#endif
+
+/*
+ * Relaxed I/O memory access primitives. These follow the Device memory
+ * ordering rules but do not guarantee any ordering relative to Normal memory
+ * accesses.  These are defined to order the indicated access (either a read or
+ * write) with all other I/O memory accesses. Since the platform specification
+ * defines that all I/O regions are strongly ordered on channel 2, no explicit
+ * fences are required to enforce this ordering.
+ */
+/* FIXME: These are now the same as asm-generic */
+#define __io_rbr()		do {} while (0)
+#define __io_rar()		do {} while (0)
+#define __io_rbw()		do {} while (0)
+#define __io_raw()		do {} while (0)
+
+#define readb_relaxed(c)	({ u8  __v; __io_rbr(); __v = readb_cpu(c); __io_rar(); __v; })
+#define readw_relaxed(c)	({ u16 __v; __io_rbr(); __v = readw_cpu(c); __io_rar(); __v; })
+#define readl_relaxed(c)	({ u32 __v; __io_rbr(); __v = readl_cpu(c); __io_rar(); __v; })
+
+#define writeb_relaxed(v,c)	({ __io_rbw(); writeb_cpu((v),(c)); __io_raw(); })
+#define writew_relaxed(v,c)	({ __io_rbw(); writew_cpu((v),(c)); __io_raw(); })
+#define writel_relaxed(v,c)	({ __io_rbw(); writel_cpu((v),(c)); __io_raw(); })
+
+#ifdef CONFIG_64BIT
+#define readq_relaxed(c)	({ u64 __v; __io_rbr(); __v = readq_cpu(c); __io_rar(); __v; })
+#define writeq_relaxed(v,c)	({ __io_rbw(); writeq_cpu((v),(c)); __io_raw(); })
+#endif
+
+/*
+ * I/O memory access primitives. Reads are ordered relative to any
+ * following Normal memory access. Writes are ordered relative to any prior
+ * Normal memory access.  The memory barriers here are necessary as RISC-V
+ * doesn't define any ordering between the memory space and the I/O space.
+ */
+#define __io_br()	do {} while (0)
+#define __io_ar()	__asm__ __volatile__ ("fence i,r" : : : "memory");
+#define __io_bw()	__asm__ __volatile__ ("fence w,o" : : : "memory");
+#define __io_aw()	do {} while (0)
+
+#define readb(c)	({ u8  __v; __io_br(); __v = readb_cpu(c); __io_ar(); __v; })
+#define readw(c)	({ u16 __v; __io_br(); __v = readw_cpu(c); __io_ar(); __v; })
+#define readl(c)	({ u32 __v; __io_br(); __v = readl_cpu(c); __io_ar(); __v; })
+
+#define writeb(v,c)	({ __io_bw(); writeb_cpu((v),(c)); __io_aw(); })
+#define writew(v,c)	({ __io_bw(); writew_cpu((v),(c)); __io_aw(); })
+#define writel(v,c)	({ __io_bw(); writel_cpu((v),(c)); __io_aw(); })
+
+#ifdef CONFIG_64BIT
+#define readq(c)	({ u64 __v; __io_br(); __v = readq_cpu(c); __io_ar(); __v; })
+#define writeq(v,c)	({ __io_bw(); writeq_cpu((v),(c)); __io_aw(); })
+#endif
+
+/*
+ * Emulation routines for the port-mapped IO space used by some PCI drivers.
+ * These are defined as being "fully synchronous", but also "not guaranteed to
+ * be fully ordered with respect to other memory and I/O operations".  We're
+ * going to be on the safe side here and just make them:
+ *  - Fully ordered WRT each other, by bracketing them with two fences.  The
+ *    outer set contains both I/O so inX is ordered with outX, while the inner just
+ *    needs the type of the access (I for inX and O for outX).
+ *  - Ordered in the same manner as readX/writeX WRT memory by subsuming their
+ *    fences.
+ *  - Ordered WRT timer reads, so udelay and friends don't get elided by the
+ *    implementation.
+ * Note that there is no way to actually enforce that outX is a non-posted
+ * operation on RISC-V, but hopefully the timer ordering constraint is
+ * sufficient to ensure this works sanely on controllers that support I/O
+ * writes.
+ */
+#define __io_pbr()	__asm__ __volatile__ ("fence io,i"  : : : "memory");
+#define __io_par()	__asm__ __volatile__ ("fence i,ior" : : : "memory");
+#define __io_pbw()	__asm__ __volatile__ ("fence iow,o" : : : "memory");
+#define __io_paw()	__asm__ __volatile__ ("fence o,io"  : : : "memory");
+
+#define inb(c)		({ u8  __v; __io_pbr(); __v = readb_cpu((void*)(PCI_IOBASE + (c))); __io_par(); __v; })
+#define inw(c)		({ u16 __v; __io_pbr(); __v = readw_cpu((void*)(PCI_IOBASE + (c))); __io_par(); __v; })
+#define inl(c)		({ u32 __v; __io_pbr(); __v = readl_cpu((void*)(PCI_IOBASE + (c))); __io_par(); __v; })
+
+#define outb(v,c)	({ __io_pbw(); writeb_cpu((v),(void*)(PCI_IOBASE + (c))); __io_paw(); })
+#define outw(v,c)	({ __io_pbw(); writew_cpu((v),(void*)(PCI_IOBASE + (c))); __io_paw(); })
+#define outl(v,c)	({ __io_pbw(); writel_cpu((v),(void*)(PCI_IOBASE + (c))); __io_paw(); })
+
+#ifdef CONFIG_64BIT
+#define inq(c)		({ u64 __v; __io_pbr(); __v = readq_cpu((void*)(c)); __io_par(); __v; })
+#define outq(v,c)	({ __io_pbw(); writeq_cpu((v),(void*)(c)); __io_paw(); })
+#endif
+
+/*
+ * Accesses from a single hart to a single I/O address must be ordered.  This
+ * allows us to use the raw read macros, but we still need to fence before and
+ * after the block to ensure ordering WRT other macros.  These are defined to
+ * perform host-endian accesses so we use __raw instead of __cpu.
+ */
+#define __io_reads_ins(port, ctype, len, bfence, afence)			\
+	static inline void __ ## port ## len(const volatile void __iomem *addr,	\
+					     void *buffer,			\
+					     unsigned int count)		\
+	{									\
+		bfence;								\
+		if (count) {							\
+			ctype *buf = buffer;					\
+										\
+			do {							\
+				ctype x = __raw_read ## len(addr);		\
+				*buf++ = x;					\
+			} while (--count);					\
+		}								\
+		afence;								\
+	}
+
+#define __io_writes_outs(port, ctype, len, bfence, afence)			\
+	static inline void __ ## port ## len(volatile void __iomem *addr,	\
+					     const void *buffer,		\
+					     unsigned int count)		\
+	{									\
+		bfence;								\
+		if (count) {							\
+			const ctype *buf = buffer;				\
+										\
+			do {							\
+				__raw_write ## len(*buf++, addr);		\
+			} while (--count);					\
+		}								\
+		afence;								\
+	}
+
+__io_reads_ins(reads,  u8, b, __io_br(), __io_ar())
+__io_reads_ins(reads, u16, w, __io_br(), __io_ar())
+__io_reads_ins(reads, u32, l, __io_br(), __io_ar())
+#define readsb(addr, buffer, count) __readsb(addr, buffer, count)
+#define readsw(addr, buffer, count) __readsw(addr, buffer, count)
+#define readsl(addr, buffer, count) __readsl(addr, buffer, count)
+
+__io_reads_ins(ins,  u8, b, __io_pbr(), __io_par())
+__io_reads_ins(ins, u16, w, __io_pbr(), __io_par())
+__io_reads_ins(ins, u32, l, __io_pbr(), __io_par())
+#define insb(addr, buffer, count) __insb((void __iomem *)(long)addr, buffer, count)
+#define insw(addr, buffer, count) __insw((void __iomem *)(long)addr, buffer, count)
+#define insl(addr, buffer, count) __insl((void __iomem *)(long)addr, buffer, count)
+
+__io_writes_outs(writes,  u8, b, __io_bw(), __io_aw())
+__io_writes_outs(writes, u16, w, __io_bw(), __io_aw())
+__io_writes_outs(writes, u32, l, __io_bw(), __io_aw())
+#define writesb(addr, buffer, count) __writesb(addr, buffer, count)
+#define writesw(addr, buffer, count) __writesw(addr, buffer, count)
+#define writesl(addr, buffer, count) __writesl(addr, buffer, count)
+
+__io_writes_outs(outs,  u8, b, __io_pbw(), __io_paw())
+__io_writes_outs(outs, u16, w, __io_pbw(), __io_paw())
+__io_writes_outs(outs, u32, l, __io_pbw(), __io_paw())
+#define outsb(addr, buffer, count) __outsb((void __iomem *)(long)addr, buffer, count)
+#define outsw(addr, buffer, count) __outsw((void __iomem *)(long)addr, buffer, count)
+#define outsl(addr, buffer, count) __outsl((void __iomem *)(long)addr, buffer, count)
+
+#ifdef CONFIG_64BIT
+__io_reads_ins(reads, u64, q, __io_br(), __io_ar())
+#define readsq(addr, buffer, count) __readsq(addr, buffer, count)
+
+__io_reads_ins(ins, u64, q, __io_pbr(), __io_par())
+#define insq(addr, buffer, count) __insq((void __iomem *)addr, buffer, count)
+
+__io_writes_outs(writes, u64, q, __io_bw(), __io_aw())
+#define writesq(addr, buffer, count) __writesq(addr, buffer, count)
+
+__io_writes_outs(outs, u64, q, __io_pbr(), __io_paw())
+#define outsq(addr, buffer, count) __outsq((void __iomem *)addr, buffer, count)
+#endif
+
+#include <asm-generic/io.h>
+
+#endif /* _ASM_RISCV_IO_H */