Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 479 insertions, 0 deletions

diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c
new file mode 100644
index 000000000..c01767a04
--- /dev/null
+++ b/arch/sparc/kernel/sun4m_irq.c
@@ -0,0 +1,479 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * sun4m irq support
+ *
+ *  djhr: Hacked out of irq.c into a CPU dependent version.
+ *
+ *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *  Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
+ *  Copyright (C) 1995 Pete A. Zaitcev (zaitcev@yahoo.com)
+ *  Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk)
+ */
+
+#include <linux/slab.h>
+#include <linux/sched/debug.h>
+
+#include <asm/timer.h>
+#include <asm/traps.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/cacheflush.h>
+
+#include "irq.h"
+#include "kernel.h"
+
+/* Sample sun4m IRQ layout:
+ *
+ * 0x22 - Power
+ * 0x24 - ESP SCSI
+ * 0x26 - Lance ethernet
+ * 0x2b - Floppy
+ * 0x2c - Zilog uart
+ * 0x32 - SBUS level 0
+ * 0x33 - Parallel port, SBUS level 1
+ * 0x35 - SBUS level 2
+ * 0x37 - SBUS level 3
+ * 0x39 - Audio, Graphics card, SBUS level 4
+ * 0x3b - SBUS level 5
+ * 0x3d - SBUS level 6
+ *
+ * Each interrupt source has a mask bit in the interrupt registers.
+ * When the mask bit is set, this blocks interrupt deliver.  So you
+ * clear the bit to enable the interrupt.
+ *
+ * Interrupts numbered less than 0x10 are software triggered interrupts
+ * and unused by Linux.
+ *
+ * Interrupt level assignment on sun4m:
+ *
+ *	level		source
+ * ------------------------------------------------------------
+ *	  1		softint-1
+ *	  2		softint-2, VME/SBUS level 1
+ *	  3		softint-3, VME/SBUS level 2
+ *	  4		softint-4, onboard SCSI
+ *	  5		softint-5, VME/SBUS level 3
+ *	  6		softint-6, onboard ETHERNET
+ *	  7		softint-7, VME/SBUS level 4
+ *	  8		softint-8, onboard VIDEO
+ *	  9		softint-9, VME/SBUS level 5, Module Interrupt
+ *	 10		softint-10, system counter/timer
+ *	 11		softint-11, VME/SBUS level 6, Floppy
+ *	 12		softint-12, Keyboard/Mouse, Serial
+ *	 13		softint-13, VME/SBUS level 7, ISDN Audio
+ *	 14		softint-14, per-processor counter/timer
+ *	 15		softint-15, Asynchronous Errors (broadcast)
+ *
+ * Each interrupt source is masked distinctly in the sun4m interrupt
+ * registers.  The PIL level alone is therefore ambiguous, since multiple
+ * interrupt sources map to a single PIL.
+ *
+ * This ambiguity is resolved in the 'intr' property for device nodes
+ * in the OF device tree.  Each 'intr' property entry is composed of
+ * two 32-bit words.  The first word is the IRQ priority value, which
+ * is what we're intersted in.  The second word is the IRQ vector, which
+ * is unused.
+ *
+ * The low 4 bits of the IRQ priority indicate the PIL, and the upper
+ * 4 bits indicate onboard vs. SBUS leveled vs. VME leveled.  0x20
+ * means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled.
+ *
+ * For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI
+ * whereas a value of 0x33 is SBUS level 2.  Here are some sample
+ * 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and
+ * Tadpole S3 GX systems.
+ *
+ * esp:		0x24	onboard ESP SCSI
+ * le:		0x26	onboard Lance ETHERNET
+ * p9100:	0x32	SBUS level 1 P9100 video
+ * bpp:		0x33	SBUS level 2 BPP parallel port device
+ * DBRI:	0x39	SBUS level 5 DBRI ISDN audio
+ * SUNW,leo:	0x39	SBUS level 5 LEO video
+ * pcmcia:	0x3b	SBUS level 6 PCMCIA controller
+ * uctrl:	0x3b	SBUS level 6 UCTRL device
+ * modem:	0x3d	SBUS level 7 MODEM
+ * zs:		0x2c	onboard keyboard/mouse/serial
+ * floppy:	0x2b	onboard Floppy
+ * power:	0x22	onboard power device (XXX unknown mask bit XXX)
+ */
+
+
+/* Code in entry.S needs to get at these register mappings.  */
+struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS];
+struct sun4m_irq_global __iomem *sun4m_irq_global;
+
+struct sun4m_handler_data {
+	bool    percpu;
+	long    mask;
+};
+
+/* Dave Redman (djhr@tadpole.co.uk)
+ * The sun4m interrupt registers.
+ */
+#define SUN4M_INT_ENABLE	0x80000000
+#define SUN4M_INT_E14		0x00000080
+#define SUN4M_INT_E10		0x00080000
+
+#define	SUN4M_INT_MASKALL	0x80000000	  /* mask all interrupts */
+#define	SUN4M_INT_MODULE_ERR	0x40000000	  /* module error */
+#define	SUN4M_INT_M2S_WRITE_ERR	0x20000000	  /* write buffer error */
+#define	SUN4M_INT_ECC_ERR	0x10000000	  /* ecc memory error */
+#define	SUN4M_INT_VME_ERR	0x08000000	  /* vme async error */
+#define	SUN4M_INT_FLOPPY	0x00400000	  /* floppy disk */
+#define	SUN4M_INT_MODULE	0x00200000	  /* module interrupt */
+#define	SUN4M_INT_VIDEO		0x00100000	  /* onboard video */
+#define	SUN4M_INT_REALTIME	0x00080000	  /* system timer */
+#define	SUN4M_INT_SCSI		0x00040000	  /* onboard scsi */
+#define	SUN4M_INT_AUDIO		0x00020000	  /* audio/isdn */
+#define	SUN4M_INT_ETHERNET	0x00010000	  /* onboard ethernet */
+#define	SUN4M_INT_SERIAL	0x00008000	  /* serial ports */
+#define	SUN4M_INT_KBDMS		0x00004000	  /* keyboard/mouse */
+#define	SUN4M_INT_SBUSBITS	0x00003F80	  /* sbus int bits */
+#define	SUN4M_INT_VMEBITS	0x0000007F	  /* vme int bits */
+
+#define	SUN4M_INT_ERROR		(SUN4M_INT_MODULE_ERR |    \
+				 SUN4M_INT_M2S_WRITE_ERR | \
+				 SUN4M_INT_ECC_ERR |       \
+				 SUN4M_INT_VME_ERR)
+
+#define SUN4M_INT_SBUS(x)	(1 << (x+7))
+#define SUN4M_INT_VME(x)	(1 << (x))
+
+/* Interrupt levels used by OBP */
+#define	OBP_INT_LEVEL_SOFT	0x10
+#define	OBP_INT_LEVEL_ONBOARD	0x20
+#define	OBP_INT_LEVEL_SBUS	0x30
+#define	OBP_INT_LEVEL_VME	0x40
+
+#define SUN4M_TIMER_IRQ         (OBP_INT_LEVEL_ONBOARD | 10)
+#define SUN4M_PROFILE_IRQ       (OBP_INT_LEVEL_ONBOARD | 14)
+
+static unsigned long sun4m_imask[0x50] = {
+	/* 0x00 - SMP */
+	0,  SUN4M_SOFT_INT(1),
+	SUN4M_SOFT_INT(2),  SUN4M_SOFT_INT(3),
+	SUN4M_SOFT_INT(4),  SUN4M_SOFT_INT(5),
+	SUN4M_SOFT_INT(6),  SUN4M_SOFT_INT(7),
+	SUN4M_SOFT_INT(8),  SUN4M_SOFT_INT(9),
+	SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
+	SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
+	SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
+	/* 0x10 - soft */
+	0,  SUN4M_SOFT_INT(1),
+	SUN4M_SOFT_INT(2),  SUN4M_SOFT_INT(3),
+	SUN4M_SOFT_INT(4),  SUN4M_SOFT_INT(5),
+	SUN4M_SOFT_INT(6),  SUN4M_SOFT_INT(7),
+	SUN4M_SOFT_INT(8),  SUN4M_SOFT_INT(9),
+	SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
+	SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
+	SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
+	/* 0x20 - onboard */
+	0, 0, 0, 0,
+	SUN4M_INT_SCSI,  0, SUN4M_INT_ETHERNET, 0,
+	SUN4M_INT_VIDEO, SUN4M_INT_MODULE,
+	SUN4M_INT_REALTIME, SUN4M_INT_FLOPPY,
+	(SUN4M_INT_SERIAL | SUN4M_INT_KBDMS),
+	SUN4M_INT_AUDIO, SUN4M_INT_E14, SUN4M_INT_MODULE_ERR,
+	/* 0x30 - sbus */
+	0, 0, SUN4M_INT_SBUS(0), SUN4M_INT_SBUS(1),
+	0, SUN4M_INT_SBUS(2), 0, SUN4M_INT_SBUS(3),
+	0, SUN4M_INT_SBUS(4), 0, SUN4M_INT_SBUS(5),
+	0, SUN4M_INT_SBUS(6), 0, 0,
+	/* 0x40 - vme */
+	0, 0, SUN4M_INT_VME(0), SUN4M_INT_VME(1),
+	0, SUN4M_INT_VME(2), 0, SUN4M_INT_VME(3),
+	0, SUN4M_INT_VME(4), 0, SUN4M_INT_VME(5),
+	0, SUN4M_INT_VME(6), 0, 0
+};
+
+static void sun4m_mask_irq(struct irq_data *data)
+{
+	struct sun4m_handler_data *handler_data;
+	int cpu = smp_processor_id();
+
+	handler_data = irq_data_get_irq_handler_data(data);
+	if (handler_data->mask) {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		if (handler_data->percpu) {
+			sbus_writel(handler_data->mask, &sun4m_irq_percpu[cpu]->set);
+		} else {
+			sbus_writel(handler_data->mask, &sun4m_irq_global->mask_set);
+		}
+		local_irq_restore(flags);
+	}
+}
+
+static void sun4m_unmask_irq(struct irq_data *data)
+{
+	struct sun4m_handler_data *handler_data;
+	int cpu = smp_processor_id();
+
+	handler_data = irq_data_get_irq_handler_data(data);
+	if (handler_data->mask) {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		if (handler_data->percpu) {
+			sbus_writel(handler_data->mask, &sun4m_irq_percpu[cpu]->clear);
+		} else {
+			sbus_writel(handler_data->mask, &sun4m_irq_global->mask_clear);
+		}
+		local_irq_restore(flags);
+	}
+}
+
+static unsigned int sun4m_startup_irq(struct irq_data *data)
+{
+	irq_link(data->irq);
+	sun4m_unmask_irq(data);
+	return 0;
+}
+
+static void sun4m_shutdown_irq(struct irq_data *data)
+{
+	sun4m_mask_irq(data);
+	irq_unlink(data->irq);
+}
+
+static struct irq_chip sun4m_irq = {
+	.name		= "sun4m",
+	.irq_startup	= sun4m_startup_irq,
+	.irq_shutdown	= sun4m_shutdown_irq,
+	.irq_mask	= sun4m_mask_irq,
+	.irq_unmask	= sun4m_unmask_irq,
+};
+
+
+static unsigned int sun4m_build_device_irq(struct platform_device *op,
+					   unsigned int real_irq)
+{
+	struct sun4m_handler_data *handler_data;
+	unsigned int irq;
+	unsigned int pil;
+
+	if (real_irq >= OBP_INT_LEVEL_VME) {
+		prom_printf("Bogus sun4m IRQ %u\n", real_irq);
+		prom_halt();
+	}
+	pil = (real_irq & 0xf);
+	irq = irq_alloc(real_irq, pil);
+
+	if (irq == 0)
+		goto out;
+
+	handler_data = irq_get_handler_data(irq);
+	if (unlikely(handler_data))
+		goto out;
+
+	handler_data = kzalloc(sizeof(struct sun4m_handler_data), GFP_ATOMIC);
+	if (unlikely(!handler_data)) {
+		prom_printf("IRQ: kzalloc(sun4m_handler_data) failed.\n");
+		prom_halt();
+	}
+
+	handler_data->mask = sun4m_imask[real_irq];
+	handler_data->percpu = real_irq < OBP_INT_LEVEL_ONBOARD;
+	irq_set_chip_and_handler_name(irq, &sun4m_irq,
+	                              handle_level_irq, "level");
+	irq_set_handler_data(irq, handler_data);
+
+out:
+	return irq;
+}
+
+struct sun4m_timer_percpu {
+	u32		l14_limit;
+	u32		l14_count;
+	u32		l14_limit_noclear;
+	u32		user_timer_start_stop;
+};
+
+static struct sun4m_timer_percpu __iomem *timers_percpu[SUN4M_NCPUS];
+
+struct sun4m_timer_global {
+	u32		l10_limit;
+	u32		l10_count;
+	u32		l10_limit_noclear;
+	u32		reserved;
+	u32		timer_config;
+};
+
+static struct sun4m_timer_global __iomem *timers_global;
+
+static void sun4m_clear_clock_irq(void)
+{
+	sbus_readl(&timers_global->l10_limit);
+}
+
+void sun4m_nmi(struct pt_regs *regs)
+{
+	unsigned long afsr, afar, si;
+
+	printk(KERN_ERR "Aieee: sun4m NMI received!\n");
+	/* XXX HyperSparc hack XXX */
+	__asm__ __volatile__("mov 0x500, %%g1\n\t"
+			     "lda [%%g1] 0x4, %0\n\t"
+			     "mov 0x600, %%g1\n\t"
+			     "lda [%%g1] 0x4, %1\n\t" :
+			     "=r" (afsr), "=r" (afar));
+	printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar);
+	si = sbus_readl(&sun4m_irq_global->pending);
+	printk(KERN_ERR "si=%08lx\n", si);
+	if (si & SUN4M_INT_MODULE_ERR)
+		printk(KERN_ERR "Module async error\n");
+	if (si & SUN4M_INT_M2S_WRITE_ERR)
+		printk(KERN_ERR "MBus/SBus async error\n");
+	if (si & SUN4M_INT_ECC_ERR)
+		printk(KERN_ERR "ECC memory error\n");
+	if (si & SUN4M_INT_VME_ERR)
+		printk(KERN_ERR "VME async error\n");
+	printk(KERN_ERR "you lose buddy boy...\n");
+	show_regs(regs);
+	prom_halt();
+}
+
+void sun4m_unmask_profile_irq(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	sbus_writel(sun4m_imask[SUN4M_PROFILE_IRQ], &sun4m_irq_global->mask_clear);
+	local_irq_restore(flags);
+}
+
+void sun4m_clear_profile_irq(int cpu)
+{
+	sbus_readl(&timers_percpu[cpu]->l14_limit);
+}
+
+static void sun4m_load_profile_irq(int cpu, unsigned int limit)
+{
+	unsigned int value = limit ? timer_value(limit) : 0;
+	sbus_writel(value, &timers_percpu[cpu]->l14_limit);
+}
+
+static void __init sun4m_init_timers(void)
+{
+	struct device_node *dp = of_find_node_by_name(NULL, "counter");
+	int i, err, len, num_cpu_timers;
+	unsigned int irq;
+	const u32 *addr;
+
+	if (!dp) {
+		printk(KERN_ERR "sun4m_init_timers: No 'counter' node.\n");
+		return;
+	}
+
+	addr = of_get_property(dp, "address", &len);
+	of_node_put(dp);
+	if (!addr) {
+		printk(KERN_ERR "sun4m_init_timers: No 'address' prop.\n");
+		return;
+	}
+
+	num_cpu_timers = (len / sizeof(u32)) - 1;
+	for (i = 0; i < num_cpu_timers; i++) {
+		timers_percpu[i] = (void __iomem *)
+			(unsigned long) addr[i];
+	}
+	timers_global = (void __iomem *)
+		(unsigned long) addr[num_cpu_timers];
+
+	/* Every per-cpu timer works in timer mode */
+	sbus_writel(0x00000000, &timers_global->timer_config);
+
+#ifdef CONFIG_SMP
+	sparc_config.cs_period = SBUS_CLOCK_RATE * 2;  /* 2 seconds */
+	sparc_config.features |= FEAT_L14_ONESHOT;
+#else
+	sparc_config.cs_period = SBUS_CLOCK_RATE / HZ; /* 1/HZ sec  */
+	sparc_config.features |= FEAT_L10_CLOCKEVENT;
+#endif
+	sparc_config.features |= FEAT_L10_CLOCKSOURCE;
+	sbus_writel(timer_value(sparc_config.cs_period),
+	            &timers_global->l10_limit);
+
+	master_l10_counter = &timers_global->l10_count;
+
+	irq = sun4m_build_device_irq(NULL, SUN4M_TIMER_IRQ);
+
+	err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL);
+	if (err) {
+		printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n",
+			err);
+		return;
+	}
+
+	for (i = 0; i < num_cpu_timers; i++)
+		sbus_writel(0, &timers_percpu[i]->l14_limit);
+	if (num_cpu_timers == 4)
+		sbus_writel(SUN4M_INT_E14, &sun4m_irq_global->mask_set);
+
+#ifdef CONFIG_SMP
+	{
+		unsigned long flags;
+		struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
+
+		/* For SMP we use the level 14 ticker, however the bootup code
+		 * has copied the firmware's level 14 vector into the boot cpu's
+		 * trap table, we must fix this now or we get squashed.
+		 */
+		local_irq_save(flags);
+		trap_table->inst_one = lvl14_save[0];
+		trap_table->inst_two = lvl14_save[1];
+		trap_table->inst_three = lvl14_save[2];
+		trap_table->inst_four = lvl14_save[3];
+		local_ops->cache_all();
+		local_irq_restore(flags);
+	}
+#endif
+}
+
+void __init sun4m_init_IRQ(void)
+{
+	struct device_node *dp = of_find_node_by_name(NULL, "interrupt");
+	int len, i, mid, num_cpu_iregs;
+	const u32 *addr;
+
+	if (!dp) {
+		printk(KERN_ERR "sun4m_init_IRQ: No 'interrupt' node.\n");
+		return;
+	}
+
+	addr = of_get_property(dp, "address", &len);
+	of_node_put(dp);
+	if (!addr) {
+		printk(KERN_ERR "sun4m_init_IRQ: No 'address' prop.\n");
+		return;
+	}
+
+	num_cpu_iregs = (len / sizeof(u32)) - 1;
+	for (i = 0; i < num_cpu_iregs; i++) {
+		sun4m_irq_percpu[i] = (void __iomem *)
+			(unsigned long) addr[i];
+	}
+	sun4m_irq_global = (void __iomem *)
+		(unsigned long) addr[num_cpu_iregs];
+
+	local_irq_disable();
+
+	sbus_writel(~SUN4M_INT_MASKALL, &sun4m_irq_global->mask_set);
+	for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++)
+		sbus_writel(~0x17fff, &sun4m_irq_percpu[mid]->clear);
+
+	if (num_cpu_iregs == 4)
+		sbus_writel(0, &sun4m_irq_global->interrupt_target);
+
+	sparc_config.init_timers      = sun4m_init_timers;
+	sparc_config.build_device_irq = sun4m_build_device_irq;
+	sparc_config.clock_rate       = SBUS_CLOCK_RATE;
+	sparc_config.clear_clock_irq  = sun4m_clear_clock_irq;
+	sparc_config.load_profile_irq = sun4m_load_profile_irq;
+
+
+	/* Cannot enable interrupts until OBP ticker is disabled. */
+}