Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1279 insertions, 0 deletions

diff --git a/arch/x86/events/intel/lbr.c b/arch/x86/events/intel/lbr.c
new file mode 100644
index 000000000..c88ed3958
--- /dev/null
+++ b/arch/x86/events/intel/lbr.c
@@ -0,0 +1,1279 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/perf_event.h>
+#include <linux/types.h>
+
+#include <asm/perf_event.h>
+#include <asm/msr.h>
+#include <asm/insn.h>
+
+#include "../perf_event.h"
+
+enum {
+	LBR_FORMAT_32		= 0x00,
+	LBR_FORMAT_LIP		= 0x01,
+	LBR_FORMAT_EIP		= 0x02,
+	LBR_FORMAT_EIP_FLAGS	= 0x03,
+	LBR_FORMAT_EIP_FLAGS2	= 0x04,
+	LBR_FORMAT_INFO		= 0x05,
+	LBR_FORMAT_TIME		= 0x06,
+	LBR_FORMAT_MAX_KNOWN    = LBR_FORMAT_TIME,
+};
+
+static const enum {
+	LBR_EIP_FLAGS		= 1,
+	LBR_TSX			= 2,
+} lbr_desc[LBR_FORMAT_MAX_KNOWN + 1] = {
+	[LBR_FORMAT_EIP_FLAGS]  = LBR_EIP_FLAGS,
+	[LBR_FORMAT_EIP_FLAGS2] = LBR_EIP_FLAGS | LBR_TSX,
+};
+
+/*
+ * Intel LBR_SELECT bits
+ * Intel Vol3a, April 2011, Section 16.7 Table 16-10
+ *
+ * Hardware branch filter (not available on all CPUs)
+ */
+#define LBR_KERNEL_BIT		0 /* do not capture at ring0 */
+#define LBR_USER_BIT		1 /* do not capture at ring > 0 */
+#define LBR_JCC_BIT		2 /* do not capture conditional branches */
+#define LBR_REL_CALL_BIT	3 /* do not capture relative calls */
+#define LBR_IND_CALL_BIT	4 /* do not capture indirect calls */
+#define LBR_RETURN_BIT		5 /* do not capture near returns */
+#define LBR_IND_JMP_BIT		6 /* do not capture indirect jumps */
+#define LBR_REL_JMP_BIT		7 /* do not capture relative jumps */
+#define LBR_FAR_BIT		8 /* do not capture far branches */
+#define LBR_CALL_STACK_BIT	9 /* enable call stack */
+
+/*
+ * Following bit only exists in Linux; we mask it out before writing it to
+ * the actual MSR. But it helps the constraint perf code to understand
+ * that this is a separate configuration.
+ */
+#define LBR_NO_INFO_BIT	       63 /* don't read LBR_INFO. */
+
+#define LBR_KERNEL	(1 << LBR_KERNEL_BIT)
+#define LBR_USER	(1 << LBR_USER_BIT)
+#define LBR_JCC		(1 << LBR_JCC_BIT)
+#define LBR_REL_CALL	(1 << LBR_REL_CALL_BIT)
+#define LBR_IND_CALL	(1 << LBR_IND_CALL_BIT)
+#define LBR_RETURN	(1 << LBR_RETURN_BIT)
+#define LBR_REL_JMP	(1 << LBR_REL_JMP_BIT)
+#define LBR_IND_JMP	(1 << LBR_IND_JMP_BIT)
+#define LBR_FAR		(1 << LBR_FAR_BIT)
+#define LBR_CALL_STACK	(1 << LBR_CALL_STACK_BIT)
+#define LBR_NO_INFO	(1ULL << LBR_NO_INFO_BIT)
+
+#define LBR_PLM (LBR_KERNEL | LBR_USER)
+
+#define LBR_SEL_MASK	0x3ff	/* valid bits in LBR_SELECT */
+#define LBR_NOT_SUPP	-1	/* LBR filter not supported */
+#define LBR_IGN		0	/* ignored */
+
+#define LBR_ANY		 \
+	(LBR_JCC	|\
+	 LBR_REL_CALL	|\
+	 LBR_IND_CALL	|\
+	 LBR_RETURN	|\
+	 LBR_REL_JMP	|\
+	 LBR_IND_JMP	|\
+	 LBR_FAR)
+
+#define LBR_FROM_FLAG_MISPRED	BIT_ULL(63)
+#define LBR_FROM_FLAG_IN_TX	BIT_ULL(62)
+#define LBR_FROM_FLAG_ABORT	BIT_ULL(61)
+
+#define LBR_FROM_SIGNEXT_2MSB	(BIT_ULL(60) | BIT_ULL(59))
+
+/*
+ * x86control flow change classification
+ * x86control flow changes include branches, interrupts, traps, faults
+ */
+enum {
+	X86_BR_NONE		= 0,      /* unknown */
+
+	X86_BR_USER		= 1 << 0, /* branch target is user */
+	X86_BR_KERNEL		= 1 << 1, /* branch target is kernel */
+
+	X86_BR_CALL		= 1 << 2, /* call */
+	X86_BR_RET		= 1 << 3, /* return */
+	X86_BR_SYSCALL		= 1 << 4, /* syscall */
+	X86_BR_SYSRET		= 1 << 5, /* syscall return */
+	X86_BR_INT		= 1 << 6, /* sw interrupt */
+	X86_BR_IRET		= 1 << 7, /* return from interrupt */
+	X86_BR_JCC		= 1 << 8, /* conditional */
+	X86_BR_JMP		= 1 << 9, /* jump */
+	X86_BR_IRQ		= 1 << 10,/* hw interrupt or trap or fault */
+	X86_BR_IND_CALL		= 1 << 11,/* indirect calls */
+	X86_BR_ABORT		= 1 << 12,/* transaction abort */
+	X86_BR_IN_TX		= 1 << 13,/* in transaction */
+	X86_BR_NO_TX		= 1 << 14,/* not in transaction */
+	X86_BR_ZERO_CALL	= 1 << 15,/* zero length call */
+	X86_BR_CALL_STACK	= 1 << 16,/* call stack */
+	X86_BR_IND_JMP		= 1 << 17,/* indirect jump */
+
+	X86_BR_TYPE_SAVE	= 1 << 18,/* indicate to save branch type */
+
+};
+
+#define X86_BR_PLM (X86_BR_USER | X86_BR_KERNEL)
+#define X86_BR_ANYTX (X86_BR_NO_TX | X86_BR_IN_TX)
+
+#define X86_BR_ANY       \
+	(X86_BR_CALL    |\
+	 X86_BR_RET     |\
+	 X86_BR_SYSCALL |\
+	 X86_BR_SYSRET  |\
+	 X86_BR_INT     |\
+	 X86_BR_IRET    |\
+	 X86_BR_JCC     |\
+	 X86_BR_JMP	 |\
+	 X86_BR_IRQ	 |\
+	 X86_BR_ABORT	 |\
+	 X86_BR_IND_CALL |\
+	 X86_BR_IND_JMP  |\
+	 X86_BR_ZERO_CALL)
+
+#define X86_BR_ALL (X86_BR_PLM | X86_BR_ANY)
+
+#define X86_BR_ANY_CALL		 \
+	(X86_BR_CALL		|\
+	 X86_BR_IND_CALL	|\
+	 X86_BR_ZERO_CALL	|\
+	 X86_BR_SYSCALL		|\
+	 X86_BR_IRQ		|\
+	 X86_BR_INT)
+
+static void intel_pmu_lbr_filter(struct cpu_hw_events *cpuc);
+
+/*
+ * We only support LBR implementations that have FREEZE_LBRS_ON_PMI
+ * otherwise it becomes near impossible to get a reliable stack.
+ */
+
+static void __intel_pmu_lbr_enable(bool pmi)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	u64 debugctl, lbr_select = 0, orig_debugctl;
+
+	/*
+	 * No need to unfreeze manually, as v4 can do that as part
+	 * of the GLOBAL_STATUS ack.
+	 */
+	if (pmi && x86_pmu.version >= 4)
+		return;
+
+	/*
+	 * No need to reprogram LBR_SELECT in a PMI, as it
+	 * did not change.
+	 */
+	if (cpuc->lbr_sel)
+		lbr_select = cpuc->lbr_sel->config & x86_pmu.lbr_sel_mask;
+	if (!pmi && cpuc->lbr_sel)
+		wrmsrl(MSR_LBR_SELECT, lbr_select);
+
+	rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
+	orig_debugctl = debugctl;
+	debugctl |= DEBUGCTLMSR_LBR;
+	/*
+	 * LBR callstack does not work well with FREEZE_LBRS_ON_PMI.
+	 * If FREEZE_LBRS_ON_PMI is set, PMI near call/return instructions
+	 * may cause superfluous increase/decrease of LBR_TOS.
+	 */
+	if (!(lbr_select & LBR_CALL_STACK))
+		debugctl |= DEBUGCTLMSR_FREEZE_LBRS_ON_PMI;
+	if (orig_debugctl != debugctl)
+		wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
+}
+
+static void __intel_pmu_lbr_disable(void)
+{
+	u64 debugctl;
+
+	rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
+	debugctl &= ~(DEBUGCTLMSR_LBR | DEBUGCTLMSR_FREEZE_LBRS_ON_PMI);
+	wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
+}
+
+static void intel_pmu_lbr_reset_32(void)
+{
+	int i;
+
+	for (i = 0; i < x86_pmu.lbr_nr; i++)
+		wrmsrl(x86_pmu.lbr_from + i, 0);
+}
+
+static void intel_pmu_lbr_reset_64(void)
+{
+	int i;
+
+	for (i = 0; i < x86_pmu.lbr_nr; i++) {
+		wrmsrl(x86_pmu.lbr_from + i, 0);
+		wrmsrl(x86_pmu.lbr_to   + i, 0);
+		if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_INFO)
+			wrmsrl(MSR_LBR_INFO_0 + i, 0);
+	}
+}
+
+void intel_pmu_lbr_reset(void)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	if (!x86_pmu.lbr_nr)
+		return;
+
+	if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_32)
+		intel_pmu_lbr_reset_32();
+	else
+		intel_pmu_lbr_reset_64();
+
+	cpuc->last_task_ctx = NULL;
+	cpuc->last_log_id = 0;
+}
+
+/*
+ * TOS = most recently recorded branch
+ */
+static inline u64 intel_pmu_lbr_tos(void)
+{
+	u64 tos;
+
+	rdmsrl(x86_pmu.lbr_tos, tos);
+	return tos;
+}
+
+enum {
+	LBR_NONE,
+	LBR_VALID,
+};
+
+/*
+ * For formats with LBR_TSX flags (e.g. LBR_FORMAT_EIP_FLAGS2), bits 61:62 in
+ * MSR_LAST_BRANCH_FROM_x are the TSX flags when TSX is supported, but when
+ * TSX is not supported they have no consistent behavior:
+ *
+ *   - For wrmsr(), bits 61:62 are considered part of the sign extension.
+ *   - For HW updates (branch captures) bits 61:62 are always OFF and are not
+ *     part of the sign extension.
+ *
+ * Therefore, if:
+ *
+ *   1) LBR has TSX format
+ *   2) CPU has no TSX support enabled
+ *
+ * ... then any value passed to wrmsr() must be sign extended to 63 bits and any
+ * value from rdmsr() must be converted to have a 61 bits sign extension,
+ * ignoring the TSX flags.
+ */
+static inline bool lbr_from_signext_quirk_needed(void)
+{
+	int lbr_format = x86_pmu.intel_cap.lbr_format;
+	bool tsx_support = boot_cpu_has(X86_FEATURE_HLE) ||
+			   boot_cpu_has(X86_FEATURE_RTM);
+
+	return !tsx_support && (lbr_desc[lbr_format] & LBR_TSX);
+}
+
+DEFINE_STATIC_KEY_FALSE(lbr_from_quirk_key);
+
+/* If quirk is enabled, ensure sign extension is 63 bits: */
+inline u64 lbr_from_signext_quirk_wr(u64 val)
+{
+	if (static_branch_unlikely(&lbr_from_quirk_key)) {
+		/*
+		 * Sign extend into bits 61:62 while preserving bit 63.
+		 *
+		 * Quirk is enabled when TSX is disabled. Therefore TSX bits
+		 * in val are always OFF and must be changed to be sign
+		 * extension bits. Since bits 59:60 are guaranteed to be
+		 * part of the sign extension bits, we can just copy them
+		 * to 61:62.
+		 */
+		val |= (LBR_FROM_SIGNEXT_2MSB & val) << 2;
+	}
+	return val;
+}
+
+/*
+ * If quirk is needed, ensure sign extension is 61 bits:
+ */
+static u64 lbr_from_signext_quirk_rd(u64 val)
+{
+	if (static_branch_unlikely(&lbr_from_quirk_key)) {
+		/*
+		 * Quirk is on when TSX is not enabled. Therefore TSX
+		 * flags must be read as OFF.
+		 */
+		val &= ~(LBR_FROM_FLAG_IN_TX | LBR_FROM_FLAG_ABORT);
+	}
+	return val;
+}
+
+static inline void wrlbr_from(unsigned int idx, u64 val)
+{
+	val = lbr_from_signext_quirk_wr(val);
+	wrmsrl(x86_pmu.lbr_from + idx, val);
+}
+
+static inline void wrlbr_to(unsigned int idx, u64 val)
+{
+	wrmsrl(x86_pmu.lbr_to + idx, val);
+}
+
+static inline u64 rdlbr_from(unsigned int idx)
+{
+	u64 val;
+
+	rdmsrl(x86_pmu.lbr_from + idx, val);
+
+	return lbr_from_signext_quirk_rd(val);
+}
+
+static inline u64 rdlbr_to(unsigned int idx)
+{
+	u64 val;
+
+	rdmsrl(x86_pmu.lbr_to + idx, val);
+
+	return val;
+}
+
+static void __intel_pmu_lbr_restore(struct x86_perf_task_context *task_ctx)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	int i;
+	unsigned lbr_idx, mask;
+	u64 tos;
+
+	if (task_ctx->lbr_callstack_users == 0 ||
+	    task_ctx->lbr_stack_state == LBR_NONE) {
+		intel_pmu_lbr_reset();
+		return;
+	}
+
+	tos = task_ctx->tos;
+	/*
+	 * Does not restore the LBR registers, if
+	 * - No one else touched them, and
+	 * - Did not enter C6
+	 */
+	if ((task_ctx == cpuc->last_task_ctx) &&
+	    (task_ctx->log_id == cpuc->last_log_id) &&
+	    rdlbr_from(tos)) {
+		task_ctx->lbr_stack_state = LBR_NONE;
+		return;
+	}
+
+	mask = x86_pmu.lbr_nr - 1;
+	for (i = 0; i < task_ctx->valid_lbrs; i++) {
+		lbr_idx = (tos - i) & mask;
+		wrlbr_from(lbr_idx, task_ctx->lbr_from[i]);
+		wrlbr_to  (lbr_idx, task_ctx->lbr_to[i]);
+
+		if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_INFO)
+			wrmsrl(MSR_LBR_INFO_0 + lbr_idx, task_ctx->lbr_info[i]);
+	}
+
+	for (; i < x86_pmu.lbr_nr; i++) {
+		lbr_idx = (tos - i) & mask;
+		wrlbr_from(lbr_idx, 0);
+		wrlbr_to(lbr_idx, 0);
+		if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_INFO)
+			wrmsrl(MSR_LBR_INFO_0 + lbr_idx, 0);
+	}
+
+	wrmsrl(x86_pmu.lbr_tos, tos);
+	task_ctx->lbr_stack_state = LBR_NONE;
+}
+
+static void __intel_pmu_lbr_save(struct x86_perf_task_context *task_ctx)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	unsigned lbr_idx, mask;
+	u64 tos, from;
+	int i;
+
+	if (task_ctx->lbr_callstack_users == 0) {
+		task_ctx->lbr_stack_state = LBR_NONE;
+		return;
+	}
+
+	mask = x86_pmu.lbr_nr - 1;
+	tos = intel_pmu_lbr_tos();
+	for (i = 0; i < x86_pmu.lbr_nr; i++) {
+		lbr_idx = (tos - i) & mask;
+		from = rdlbr_from(lbr_idx);
+		if (!from)
+			break;
+		task_ctx->lbr_from[i] = from;
+		task_ctx->lbr_to[i]   = rdlbr_to(lbr_idx);
+		if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_INFO)
+			rdmsrl(MSR_LBR_INFO_0 + lbr_idx, task_ctx->lbr_info[i]);
+	}
+	task_ctx->valid_lbrs = i;
+	task_ctx->tos = tos;
+	task_ctx->lbr_stack_state = LBR_VALID;
+
+	cpuc->last_task_ctx = task_ctx;
+	cpuc->last_log_id = ++task_ctx->log_id;
+}
+
+void intel_pmu_lbr_sched_task(struct perf_event_context *ctx, bool sched_in)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct x86_perf_task_context *task_ctx;
+
+	if (!cpuc->lbr_users)
+		return;
+
+	/*
+	 * If LBR callstack feature is enabled and the stack was saved when
+	 * the task was scheduled out, restore the stack. Otherwise flush
+	 * the LBR stack.
+	 */
+	task_ctx = ctx ? ctx->task_ctx_data : NULL;
+	if (task_ctx) {
+		if (sched_in)
+			__intel_pmu_lbr_restore(task_ctx);
+		else
+			__intel_pmu_lbr_save(task_ctx);
+		return;
+	}
+
+	/*
+	 * Since a context switch can flip the address space and LBR entries
+	 * are not tagged with an identifier, we need to wipe the LBR, even for
+	 * per-cpu events. You simply cannot resolve the branches from the old
+	 * address space.
+	 */
+	if (sched_in)
+		intel_pmu_lbr_reset();
+}
+
+static inline bool branch_user_callstack(unsigned br_sel)
+{
+	return (br_sel & X86_BR_USER) && (br_sel & X86_BR_CALL_STACK);
+}
+
+void intel_pmu_lbr_add(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct x86_perf_task_context *task_ctx;
+
+	if (!x86_pmu.lbr_nr)
+		return;
+
+	cpuc->br_sel = event->hw.branch_reg.reg;
+
+	if (branch_user_callstack(cpuc->br_sel) && event->ctx->task_ctx_data) {
+		task_ctx = event->ctx->task_ctx_data;
+		task_ctx->lbr_callstack_users++;
+	}
+
+	/*
+	 * Request pmu::sched_task() callback, which will fire inside the
+	 * regular perf event scheduling, so that call will:
+	 *
+	 *  - restore or wipe; when LBR-callstack,
+	 *  - wipe; otherwise,
+	 *
+	 * when this is from __perf_event_task_sched_in().
+	 *
+	 * However, if this is from perf_install_in_context(), no such callback
+	 * will follow and we'll need to reset the LBR here if this is the
+	 * first LBR event.
+	 *
+	 * The problem is, we cannot tell these cases apart... but we can
+	 * exclude the biggest chunk of cases by looking at
+	 * event->total_time_running. An event that has accrued runtime cannot
+	 * be 'new'. Conversely, a new event can get installed through the
+	 * context switch path for the first time.
+	 */
+	perf_sched_cb_inc(event->ctx->pmu);
+	if (!cpuc->lbr_users++ && !event->total_time_running)
+		intel_pmu_lbr_reset();
+}
+
+void intel_pmu_lbr_del(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct x86_perf_task_context *task_ctx;
+
+	if (!x86_pmu.lbr_nr)
+		return;
+
+	if (branch_user_callstack(cpuc->br_sel) &&
+	    event->ctx->task_ctx_data) {
+		task_ctx = event->ctx->task_ctx_data;
+		task_ctx->lbr_callstack_users--;
+	}
+
+	cpuc->lbr_users--;
+	WARN_ON_ONCE(cpuc->lbr_users < 0);
+	perf_sched_cb_dec(event->ctx->pmu);
+}
+
+void intel_pmu_lbr_enable_all(bool pmi)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	if (cpuc->lbr_users)
+		__intel_pmu_lbr_enable(pmi);
+}
+
+void intel_pmu_lbr_disable_all(void)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	if (cpuc->lbr_users)
+		__intel_pmu_lbr_disable();
+}
+
+static void intel_pmu_lbr_read_32(struct cpu_hw_events *cpuc)
+{
+	unsigned long mask = x86_pmu.lbr_nr - 1;
+	u64 tos = intel_pmu_lbr_tos();
+	int i;
+
+	for (i = 0; i < x86_pmu.lbr_nr; i++) {
+		unsigned long lbr_idx = (tos - i) & mask;
+		union {
+			struct {
+				u32 from;
+				u32 to;
+			};
+			u64     lbr;
+		} msr_lastbranch;
+
+		rdmsrl(x86_pmu.lbr_from + lbr_idx, msr_lastbranch.lbr);
+
+		cpuc->lbr_entries[i].from	= msr_lastbranch.from;
+		cpuc->lbr_entries[i].to		= msr_lastbranch.to;
+		cpuc->lbr_entries[i].mispred	= 0;
+		cpuc->lbr_entries[i].predicted	= 0;
+		cpuc->lbr_entries[i].in_tx	= 0;
+		cpuc->lbr_entries[i].abort	= 0;
+		cpuc->lbr_entries[i].cycles	= 0;
+		cpuc->lbr_entries[i].type	= 0;
+		cpuc->lbr_entries[i].reserved	= 0;
+	}
+	cpuc->lbr_stack.nr = i;
+}
+
+/*
+ * Due to lack of segmentation in Linux the effective address (offset)
+ * is the same as the linear address, allowing us to merge the LIP and EIP
+ * LBR formats.
+ */
+static void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc)
+{
+	bool need_info = false, call_stack = false;
+	unsigned long mask = x86_pmu.lbr_nr - 1;
+	int lbr_format = x86_pmu.intel_cap.lbr_format;
+	u64 tos = intel_pmu_lbr_tos();
+	int i;
+	int out = 0;
+	int num = x86_pmu.lbr_nr;
+
+	if (cpuc->lbr_sel) {
+		need_info = !(cpuc->lbr_sel->config & LBR_NO_INFO);
+		if (cpuc->lbr_sel->config & LBR_CALL_STACK)
+			call_stack = true;
+	}
+
+	for (i = 0; i < num; i++) {
+		unsigned long lbr_idx = (tos - i) & mask;
+		u64 from, to, mis = 0, pred = 0, in_tx = 0, abort = 0;
+		int skip = 0;
+		u16 cycles = 0;
+		int lbr_flags = lbr_desc[lbr_format];
+
+		from = rdlbr_from(lbr_idx);
+		to   = rdlbr_to(lbr_idx);
+
+		/*
+		 * Read LBR call stack entries
+		 * until invalid entry (0s) is detected.
+		 */
+		if (call_stack && !from)
+			break;
+
+		if (lbr_format == LBR_FORMAT_INFO && need_info) {
+			u64 info;
+
+			rdmsrl(MSR_LBR_INFO_0 + lbr_idx, info);
+			mis = !!(info & LBR_INFO_MISPRED);
+			pred = !mis;
+			in_tx = !!(info & LBR_INFO_IN_TX);
+			abort = !!(info & LBR_INFO_ABORT);
+			cycles = (info & LBR_INFO_CYCLES);
+		}
+
+		if (lbr_format == LBR_FORMAT_TIME) {
+			mis = !!(from & LBR_FROM_FLAG_MISPRED);
+			pred = !mis;
+			skip = 1;
+			cycles = ((to >> 48) & LBR_INFO_CYCLES);
+
+			to = (u64)((((s64)to) << 16) >> 16);
+		}
+
+		if (lbr_flags & LBR_EIP_FLAGS) {
+			mis = !!(from & LBR_FROM_FLAG_MISPRED);
+			pred = !mis;
+			skip = 1;
+		}
+		if (lbr_flags & LBR_TSX) {
+			in_tx = !!(from & LBR_FROM_FLAG_IN_TX);
+			abort = !!(from & LBR_FROM_FLAG_ABORT);
+			skip = 3;
+		}
+		from = (u64)((((s64)from) << skip) >> skip);
+
+		/*
+		 * Some CPUs report duplicated abort records,
+		 * with the second entry not having an abort bit set.
+		 * Skip them here. This loop runs backwards,
+		 * so we need to undo the previous record.
+		 * If the abort just happened outside the window
+		 * the extra entry cannot be removed.
+		 */
+		if (abort && x86_pmu.lbr_double_abort && out > 0)
+			out--;
+
+		cpuc->lbr_entries[out].from	 = from;
+		cpuc->lbr_entries[out].to	 = to;
+		cpuc->lbr_entries[out].mispred	 = mis;
+		cpuc->lbr_entries[out].predicted = pred;
+		cpuc->lbr_entries[out].in_tx	 = in_tx;
+		cpuc->lbr_entries[out].abort	 = abort;
+		cpuc->lbr_entries[out].cycles	 = cycles;
+		cpuc->lbr_entries[out].type	 = 0;
+		cpuc->lbr_entries[out].reserved	 = 0;
+		out++;
+	}
+	cpuc->lbr_stack.nr = out;
+}
+
+void intel_pmu_lbr_read(void)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	if (!cpuc->lbr_users)
+		return;
+
+	if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_32)
+		intel_pmu_lbr_read_32(cpuc);
+	else
+		intel_pmu_lbr_read_64(cpuc);
+
+	intel_pmu_lbr_filter(cpuc);
+}
+
+/*
+ * SW filter is used:
+ * - in case there is no HW filter
+ * - in case the HW filter has errata or limitations
+ */
+static int intel_pmu_setup_sw_lbr_filter(struct perf_event *event)
+{
+	u64 br_type = event->attr.branch_sample_type;
+	int mask = 0;
+
+	if (br_type & PERF_SAMPLE_BRANCH_USER)
+		mask |= X86_BR_USER;
+
+	if (br_type & PERF_SAMPLE_BRANCH_KERNEL)
+		mask |= X86_BR_KERNEL;
+
+	/* we ignore BRANCH_HV here */
+
+	if (br_type & PERF_SAMPLE_BRANCH_ANY)
+		mask |= X86_BR_ANY;
+
+	if (br_type & PERF_SAMPLE_BRANCH_ANY_CALL)
+		mask |= X86_BR_ANY_CALL;
+
+	if (br_type & PERF_SAMPLE_BRANCH_ANY_RETURN)
+		mask |= X86_BR_RET | X86_BR_IRET | X86_BR_SYSRET;
+
+	if (br_type & PERF_SAMPLE_BRANCH_IND_CALL)
+		mask |= X86_BR_IND_CALL;
+
+	if (br_type & PERF_SAMPLE_BRANCH_ABORT_TX)
+		mask |= X86_BR_ABORT;
+
+	if (br_type & PERF_SAMPLE_BRANCH_IN_TX)
+		mask |= X86_BR_IN_TX;
+
+	if (br_type & PERF_SAMPLE_BRANCH_NO_TX)
+		mask |= X86_BR_NO_TX;
+
+	if (br_type & PERF_SAMPLE_BRANCH_COND)
+		mask |= X86_BR_JCC;
+
+	if (br_type & PERF_SAMPLE_BRANCH_CALL_STACK) {
+		if (!x86_pmu_has_lbr_callstack())
+			return -EOPNOTSUPP;
+		if (mask & ~(X86_BR_USER | X86_BR_KERNEL))
+			return -EINVAL;
+		mask |= X86_BR_CALL | X86_BR_IND_CALL | X86_BR_RET |
+			X86_BR_CALL_STACK;
+	}
+
+	if (br_type & PERF_SAMPLE_BRANCH_IND_JUMP)
+		mask |= X86_BR_IND_JMP;
+
+	if (br_type & PERF_SAMPLE_BRANCH_CALL)
+		mask |= X86_BR_CALL | X86_BR_ZERO_CALL;
+
+	if (br_type & PERF_SAMPLE_BRANCH_TYPE_SAVE)
+		mask |= X86_BR_TYPE_SAVE;
+
+	/*
+	 * stash actual user request into reg, it may
+	 * be used by fixup code for some CPU
+	 */
+	event->hw.branch_reg.reg = mask;
+	return 0;
+}
+
+/*
+ * setup the HW LBR filter
+ * Used only when available, may not be enough to disambiguate
+ * all branches, may need the help of the SW filter
+ */
+static int intel_pmu_setup_hw_lbr_filter(struct perf_event *event)
+{
+	struct hw_perf_event_extra *reg;
+	u64 br_type = event->attr.branch_sample_type;
+	u64 mask = 0, v;
+	int i;
+
+	for (i = 0; i < PERF_SAMPLE_BRANCH_MAX_SHIFT; i++) {
+		if (!(br_type & (1ULL << i)))
+			continue;
+
+		v = x86_pmu.lbr_sel_map[i];
+		if (v == LBR_NOT_SUPP)
+			return -EOPNOTSUPP;
+
+		if (v != LBR_IGN)
+			mask |= v;
+	}
+
+	reg = &event->hw.branch_reg;
+	reg->idx = EXTRA_REG_LBR;
+
+	/*
+	 * The first 9 bits (LBR_SEL_MASK) in LBR_SELECT operate
+	 * in suppress mode. So LBR_SELECT should be set to
+	 * (~mask & LBR_SEL_MASK) | (mask & ~LBR_SEL_MASK)
+	 * But the 10th bit LBR_CALL_STACK does not operate
+	 * in suppress mode.
+	 */
+	reg->config = mask ^ (x86_pmu.lbr_sel_mask & ~LBR_CALL_STACK);
+
+	if ((br_type & PERF_SAMPLE_BRANCH_NO_CYCLES) &&
+	    (br_type & PERF_SAMPLE_BRANCH_NO_FLAGS) &&
+	    (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_INFO))
+		reg->config |= LBR_NO_INFO;
+
+	return 0;
+}
+
+int intel_pmu_setup_lbr_filter(struct perf_event *event)
+{
+	int ret = 0;
+
+	/*
+	 * no LBR on this PMU
+	 */
+	if (!x86_pmu.lbr_nr)
+		return -EOPNOTSUPP;
+
+	/*
+	 * setup SW LBR filter
+	 */
+	ret = intel_pmu_setup_sw_lbr_filter(event);
+	if (ret)
+		return ret;
+
+	/*
+	 * setup HW LBR filter, if any
+	 */
+	if (x86_pmu.lbr_sel_map)
+		ret = intel_pmu_setup_hw_lbr_filter(event);
+
+	return ret;
+}
+
+/*
+ * return the type of control flow change at address "from"
+ * instruction is not necessarily a branch (in case of interrupt).
+ *
+ * The branch type returned also includes the priv level of the
+ * target of the control flow change (X86_BR_USER, X86_BR_KERNEL).
+ *
+ * If a branch type is unknown OR the instruction cannot be
+ * decoded (e.g., text page not present), then X86_BR_NONE is
+ * returned.
+ */
+static int branch_type(unsigned long from, unsigned long to, int abort)
+{
+	struct insn insn;
+	void *addr;
+	int bytes_read, bytes_left;
+	int ret = X86_BR_NONE;
+	int ext, to_plm, from_plm;
+	u8 buf[MAX_INSN_SIZE];
+	int is64 = 0;
+
+	to_plm = kernel_ip(to) ? X86_BR_KERNEL : X86_BR_USER;
+	from_plm = kernel_ip(from) ? X86_BR_KERNEL : X86_BR_USER;
+
+	/*
+	 * maybe zero if lbr did not fill up after a reset by the time
+	 * we get a PMU interrupt
+	 */
+	if (from == 0 || to == 0)
+		return X86_BR_NONE;
+
+	if (abort)
+		return X86_BR_ABORT | to_plm;
+
+	if (from_plm == X86_BR_USER) {
+		/*
+		 * can happen if measuring at the user level only
+		 * and we interrupt in a kernel thread, e.g., idle.
+		 */
+		if (!current->mm)
+			return X86_BR_NONE;
+
+		/* may fail if text not present */
+		bytes_left = copy_from_user_nmi(buf, (void __user *)from,
+						MAX_INSN_SIZE);
+		bytes_read = MAX_INSN_SIZE - bytes_left;
+		if (!bytes_read)
+			return X86_BR_NONE;
+
+		addr = buf;
+	} else {
+		/*
+		 * The LBR logs any address in the IP, even if the IP just
+		 * faulted. This means userspace can control the from address.
+		 * Ensure we don't blindy read any address by validating it is
+		 * a known text address.
+		 */
+		if (kernel_text_address(from)) {
+			addr = (void *)from;
+			/*
+			 * Assume we can get the maximum possible size
+			 * when grabbing kernel data.  This is not
+			 * _strictly_ true since we could possibly be
+			 * executing up next to a memory hole, but
+			 * it is very unlikely to be a problem.
+			 */
+			bytes_read = MAX_INSN_SIZE;
+		} else {
+			return X86_BR_NONE;
+		}
+	}
+
+	/*
+	 * decoder needs to know the ABI especially
+	 * on 64-bit systems running 32-bit apps
+	 */
+#ifdef CONFIG_X86_64
+	is64 = kernel_ip((unsigned long)addr) || !test_thread_flag(TIF_IA32);
+#endif
+	insn_init(&insn, addr, bytes_read, is64);
+	insn_get_opcode(&insn);
+	if (!insn.opcode.got)
+		return X86_BR_ABORT;
+
+	switch (insn.opcode.bytes[0]) {
+	case 0xf:
+		switch (insn.opcode.bytes[1]) {
+		case 0x05: /* syscall */
+		case 0x34: /* sysenter */
+			ret = X86_BR_SYSCALL;
+			break;
+		case 0x07: /* sysret */
+		case 0x35: /* sysexit */
+			ret = X86_BR_SYSRET;
+			break;
+		case 0x80 ... 0x8f: /* conditional */
+			ret = X86_BR_JCC;
+			break;
+		default:
+			ret = X86_BR_NONE;
+		}
+		break;
+	case 0x70 ... 0x7f: /* conditional */
+		ret = X86_BR_JCC;
+		break;
+	case 0xc2: /* near ret */
+	case 0xc3: /* near ret */
+	case 0xca: /* far ret */
+	case 0xcb: /* far ret */
+		ret = X86_BR_RET;
+		break;
+	case 0xcf: /* iret */
+		ret = X86_BR_IRET;
+		break;
+	case 0xcc ... 0xce: /* int */
+		ret = X86_BR_INT;
+		break;
+	case 0xe8: /* call near rel */
+		insn_get_immediate(&insn);
+		if (insn.immediate1.value == 0) {
+			/* zero length call */
+			ret = X86_BR_ZERO_CALL;
+			break;
+		}
+	case 0x9a: /* call far absolute */
+		ret = X86_BR_CALL;
+		break;
+	case 0xe0 ... 0xe3: /* loop jmp */
+		ret = X86_BR_JCC;
+		break;
+	case 0xe9 ... 0xeb: /* jmp */
+		ret = X86_BR_JMP;
+		break;
+	case 0xff: /* call near absolute, call far absolute ind */
+		insn_get_modrm(&insn);
+		ext = (insn.modrm.bytes[0] >> 3) & 0x7;
+		switch (ext) {
+		case 2: /* near ind call */
+		case 3: /* far ind call */
+			ret = X86_BR_IND_CALL;
+			break;
+		case 4:
+		case 5:
+			ret = X86_BR_IND_JMP;
+			break;
+		}
+		break;
+	default:
+		ret = X86_BR_NONE;
+	}
+	/*
+	 * interrupts, traps, faults (and thus ring transition) may
+	 * occur on any instructions. Thus, to classify them correctly,
+	 * we need to first look at the from and to priv levels. If they
+	 * are different and to is in the kernel, then it indicates
+	 * a ring transition. If the from instruction is not a ring
+	 * transition instr (syscall, systenter, int), then it means
+	 * it was a irq, trap or fault.
+	 *
+	 * we have no way of detecting kernel to kernel faults.
+	 */
+	if (from_plm == X86_BR_USER && to_plm == X86_BR_KERNEL
+	    && ret != X86_BR_SYSCALL && ret != X86_BR_INT)
+		ret = X86_BR_IRQ;
+
+	/*
+	 * branch priv level determined by target as
+	 * is done by HW when LBR_SELECT is implemented
+	 */
+	if (ret != X86_BR_NONE)
+		ret |= to_plm;
+
+	return ret;
+}
+
+#define X86_BR_TYPE_MAP_MAX	16
+
+static int branch_map[X86_BR_TYPE_MAP_MAX] = {
+	PERF_BR_CALL,		/* X86_BR_CALL */
+	PERF_BR_RET,		/* X86_BR_RET */
+	PERF_BR_SYSCALL,	/* X86_BR_SYSCALL */
+	PERF_BR_SYSRET,		/* X86_BR_SYSRET */
+	PERF_BR_UNKNOWN,	/* X86_BR_INT */
+	PERF_BR_UNKNOWN,	/* X86_BR_IRET */
+	PERF_BR_COND,		/* X86_BR_JCC */
+	PERF_BR_UNCOND,		/* X86_BR_JMP */
+	PERF_BR_UNKNOWN,	/* X86_BR_IRQ */
+	PERF_BR_IND_CALL,	/* X86_BR_IND_CALL */
+	PERF_BR_UNKNOWN,	/* X86_BR_ABORT */
+	PERF_BR_UNKNOWN,	/* X86_BR_IN_TX */
+	PERF_BR_UNKNOWN,	/* X86_BR_NO_TX */
+	PERF_BR_CALL,		/* X86_BR_ZERO_CALL */
+	PERF_BR_UNKNOWN,	/* X86_BR_CALL_STACK */
+	PERF_BR_IND,		/* X86_BR_IND_JMP */
+};
+
+static int
+common_branch_type(int type)
+{
+	int i;
+
+	type >>= 2; /* skip X86_BR_USER and X86_BR_KERNEL */
+
+	if (type) {
+		i = __ffs(type);
+		if (i < X86_BR_TYPE_MAP_MAX)
+			return branch_map[i];
+	}
+
+	return PERF_BR_UNKNOWN;
+}
+
+/*
+ * implement actual branch filter based on user demand.
+ * Hardware may not exactly satisfy that request, thus
+ * we need to inspect opcodes. Mismatched branches are
+ * discarded. Therefore, the number of branches returned
+ * in PERF_SAMPLE_BRANCH_STACK sample may vary.
+ */
+static void
+intel_pmu_lbr_filter(struct cpu_hw_events *cpuc)
+{
+	u64 from, to;
+	int br_sel = cpuc->br_sel;
+	int i, j, type;
+	bool compress = false;
+
+	/* if sampling all branches, then nothing to filter */
+	if (((br_sel & X86_BR_ALL) == X86_BR_ALL) &&
+	    ((br_sel & X86_BR_TYPE_SAVE) != X86_BR_TYPE_SAVE))
+		return;
+
+	for (i = 0; i < cpuc->lbr_stack.nr; i++) {
+
+		from = cpuc->lbr_entries[i].from;
+		to = cpuc->lbr_entries[i].to;
+
+		type = branch_type(from, to, cpuc->lbr_entries[i].abort);
+		if (type != X86_BR_NONE && (br_sel & X86_BR_ANYTX)) {
+			if (cpuc->lbr_entries[i].in_tx)
+				type |= X86_BR_IN_TX;
+			else
+				type |= X86_BR_NO_TX;
+		}
+
+		/* if type does not correspond, then discard */
+		if (type == X86_BR_NONE || (br_sel & type) != type) {
+			cpuc->lbr_entries[i].from = 0;
+			compress = true;
+		}
+
+		if ((br_sel & X86_BR_TYPE_SAVE) == X86_BR_TYPE_SAVE)
+			cpuc->lbr_entries[i].type = common_branch_type(type);
+	}
+
+	if (!compress)
+		return;
+
+	/* remove all entries with from=0 */
+	for (i = 0; i < cpuc->lbr_stack.nr; ) {
+		if (!cpuc->lbr_entries[i].from) {
+			j = i;
+			while (++j < cpuc->lbr_stack.nr)
+				cpuc->lbr_entries[j-1] = cpuc->lbr_entries[j];
+			cpuc->lbr_stack.nr--;
+			if (!cpuc->lbr_entries[i].from)
+				continue;
+		}
+		i++;
+	}
+}
+
+/*
+ * Map interface branch filters onto LBR filters
+ */
+static const int nhm_lbr_sel_map[PERF_SAMPLE_BRANCH_MAX_SHIFT] = {
+	[PERF_SAMPLE_BRANCH_ANY_SHIFT]		= LBR_ANY,
+	[PERF_SAMPLE_BRANCH_USER_SHIFT]		= LBR_USER,
+	[PERF_SAMPLE_BRANCH_KERNEL_SHIFT]	= LBR_KERNEL,
+	[PERF_SAMPLE_BRANCH_HV_SHIFT]		= LBR_IGN,
+	[PERF_SAMPLE_BRANCH_ANY_RETURN_SHIFT]	= LBR_RETURN | LBR_REL_JMP
+						| LBR_IND_JMP | LBR_FAR,
+	/*
+	 * NHM/WSM erratum: must include REL_JMP+IND_JMP to get CALL branches
+	 */
+	[PERF_SAMPLE_BRANCH_ANY_CALL_SHIFT] =
+	 LBR_REL_CALL | LBR_IND_CALL | LBR_REL_JMP | LBR_IND_JMP | LBR_FAR,
+	/*
+	 * NHM/WSM erratum: must include IND_JMP to capture IND_CALL
+	 */
+	[PERF_SAMPLE_BRANCH_IND_CALL_SHIFT] = LBR_IND_CALL | LBR_IND_JMP,
+	[PERF_SAMPLE_BRANCH_COND_SHIFT]     = LBR_JCC,
+	[PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT] = LBR_IND_JMP,
+};
+
+static const int snb_lbr_sel_map[PERF_SAMPLE_BRANCH_MAX_SHIFT] = {
+	[PERF_SAMPLE_BRANCH_ANY_SHIFT]		= LBR_ANY,
+	[PERF_SAMPLE_BRANCH_USER_SHIFT]		= LBR_USER,
+	[PERF_SAMPLE_BRANCH_KERNEL_SHIFT]	= LBR_KERNEL,
+	[PERF_SAMPLE_BRANCH_HV_SHIFT]		= LBR_IGN,
+	[PERF_SAMPLE_BRANCH_ANY_RETURN_SHIFT]	= LBR_RETURN | LBR_FAR,
+	[PERF_SAMPLE_BRANCH_ANY_CALL_SHIFT]	= LBR_REL_CALL | LBR_IND_CALL
+						| LBR_FAR,
+	[PERF_SAMPLE_BRANCH_IND_CALL_SHIFT]	= LBR_IND_CALL,
+	[PERF_SAMPLE_BRANCH_COND_SHIFT]		= LBR_JCC,
+	[PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT]	= LBR_IND_JMP,
+	[PERF_SAMPLE_BRANCH_CALL_SHIFT]		= LBR_REL_CALL,
+};
+
+static const int hsw_lbr_sel_map[PERF_SAMPLE_BRANCH_MAX_SHIFT] = {
+	[PERF_SAMPLE_BRANCH_ANY_SHIFT]		= LBR_ANY,
+	[PERF_SAMPLE_BRANCH_USER_SHIFT]		= LBR_USER,
+	[PERF_SAMPLE_BRANCH_KERNEL_SHIFT]	= LBR_KERNEL,
+	[PERF_SAMPLE_BRANCH_HV_SHIFT]		= LBR_IGN,
+	[PERF_SAMPLE_BRANCH_ANY_RETURN_SHIFT]	= LBR_RETURN | LBR_FAR,
+	[PERF_SAMPLE_BRANCH_ANY_CALL_SHIFT]	= LBR_REL_CALL | LBR_IND_CALL
+						| LBR_FAR,
+	[PERF_SAMPLE_BRANCH_IND_CALL_SHIFT]	= LBR_IND_CALL,
+	[PERF_SAMPLE_BRANCH_COND_SHIFT]		= LBR_JCC,
+	[PERF_SAMPLE_BRANCH_CALL_STACK_SHIFT]	= LBR_REL_CALL | LBR_IND_CALL
+						| LBR_RETURN | LBR_CALL_STACK,
+	[PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT]	= LBR_IND_JMP,
+	[PERF_SAMPLE_BRANCH_CALL_SHIFT]		= LBR_REL_CALL,
+};
+
+/* core */
+void __init intel_pmu_lbr_init_core(void)
+{
+	x86_pmu.lbr_nr     = 4;
+	x86_pmu.lbr_tos    = MSR_LBR_TOS;
+	x86_pmu.lbr_from   = MSR_LBR_CORE_FROM;
+	x86_pmu.lbr_to     = MSR_LBR_CORE_TO;
+
+	/*
+	 * SW branch filter usage:
+	 * - compensate for lack of HW filter
+	 */
+}
+
+/* nehalem/westmere */
+void __init intel_pmu_lbr_init_nhm(void)
+{
+	x86_pmu.lbr_nr     = 16;
+	x86_pmu.lbr_tos    = MSR_LBR_TOS;
+	x86_pmu.lbr_from   = MSR_LBR_NHM_FROM;
+	x86_pmu.lbr_to     = MSR_LBR_NHM_TO;
+
+	x86_pmu.lbr_sel_mask = LBR_SEL_MASK;
+	x86_pmu.lbr_sel_map  = nhm_lbr_sel_map;
+
+	/*
+	 * SW branch filter usage:
+	 * - workaround LBR_SEL errata (see above)
+	 * - support syscall, sysret capture.
+	 *   That requires LBR_FAR but that means far
+	 *   jmp need to be filtered out
+	 */
+}
+
+/* sandy bridge */
+void __init intel_pmu_lbr_init_snb(void)
+{
+	x86_pmu.lbr_nr	 = 16;
+	x86_pmu.lbr_tos	 = MSR_LBR_TOS;
+	x86_pmu.lbr_from = MSR_LBR_NHM_FROM;
+	x86_pmu.lbr_to   = MSR_LBR_NHM_TO;
+
+	x86_pmu.lbr_sel_mask = LBR_SEL_MASK;
+	x86_pmu.lbr_sel_map  = snb_lbr_sel_map;
+
+	/*
+	 * SW branch filter usage:
+	 * - support syscall, sysret capture.
+	 *   That requires LBR_FAR but that means far
+	 *   jmp need to be filtered out
+	 */
+}
+
+/* haswell */
+void intel_pmu_lbr_init_hsw(void)
+{
+	x86_pmu.lbr_nr	 = 16;
+	x86_pmu.lbr_tos	 = MSR_LBR_TOS;
+	x86_pmu.lbr_from = MSR_LBR_NHM_FROM;
+	x86_pmu.lbr_to   = MSR_LBR_NHM_TO;
+
+	x86_pmu.lbr_sel_mask = LBR_SEL_MASK;
+	x86_pmu.lbr_sel_map  = hsw_lbr_sel_map;
+
+	if (lbr_from_signext_quirk_needed())
+		static_branch_enable(&lbr_from_quirk_key);
+}
+
+/* skylake */
+__init void intel_pmu_lbr_init_skl(void)
+{
+	x86_pmu.lbr_nr	 = 32;
+	x86_pmu.lbr_tos	 = MSR_LBR_TOS;
+	x86_pmu.lbr_from = MSR_LBR_NHM_FROM;
+	x86_pmu.lbr_to   = MSR_LBR_NHM_TO;
+
+	x86_pmu.lbr_sel_mask = LBR_SEL_MASK;
+	x86_pmu.lbr_sel_map  = hsw_lbr_sel_map;
+
+	/*
+	 * SW branch filter usage:
+	 * - support syscall, sysret capture.
+	 *   That requires LBR_FAR but that means far
+	 *   jmp need to be filtered out
+	 */
+}
+
+/* atom */
+void __init intel_pmu_lbr_init_atom(void)
+{
+	/*
+	 * only models starting at stepping 10 seems
+	 * to have an operational LBR which can freeze
+	 * on PMU interrupt
+	 */
+	if (boot_cpu_data.x86_model == 28
+	    && boot_cpu_data.x86_stepping < 10) {
+		pr_cont("LBR disabled due to erratum");
+		return;
+	}
+
+	x86_pmu.lbr_nr	   = 8;
+	x86_pmu.lbr_tos    = MSR_LBR_TOS;
+	x86_pmu.lbr_from   = MSR_LBR_CORE_FROM;
+	x86_pmu.lbr_to     = MSR_LBR_CORE_TO;
+
+	/*
+	 * SW branch filter usage:
+	 * - compensate for lack of HW filter
+	 */
+}
+
+/* slm */
+void __init intel_pmu_lbr_init_slm(void)
+{
+	x86_pmu.lbr_nr	   = 8;
+	x86_pmu.lbr_tos    = MSR_LBR_TOS;
+	x86_pmu.lbr_from   = MSR_LBR_CORE_FROM;
+	x86_pmu.lbr_to     = MSR_LBR_CORE_TO;
+
+	x86_pmu.lbr_sel_mask = LBR_SEL_MASK;
+	x86_pmu.lbr_sel_map  = nhm_lbr_sel_map;
+
+	/*
+	 * SW branch filter usage:
+	 * - compensate for lack of HW filter
+	 */
+	pr_cont("8-deep LBR, ");
+}
+
+/* Knights Landing */
+void intel_pmu_lbr_init_knl(void)
+{
+	x86_pmu.lbr_nr	   = 8;
+	x86_pmu.lbr_tos    = MSR_LBR_TOS;
+	x86_pmu.lbr_from   = MSR_LBR_NHM_FROM;
+	x86_pmu.lbr_to     = MSR_LBR_NHM_TO;
+
+	x86_pmu.lbr_sel_mask = LBR_SEL_MASK;
+	x86_pmu.lbr_sel_map  = snb_lbr_sel_map;
+
+	/* Knights Landing does have MISPREDICT bit */
+	if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_LIP)
+		x86_pmu.intel_cap.lbr_format = LBR_FORMAT_EIP_FLAGS;
+}