diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 01:02:30 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 01:02:30 +0000 |
commit | 76cb841cb886eef6b3bee341a2266c76578724ad (patch) | |
tree | f5892e5ba6cc11949952a6ce4ecbe6d516d6ce58 /drivers/iio/temperature/mlx90614.c | |
parent | Initial commit. (diff) | |
download | linux-upstream.tar.xz linux-upstream.zip |
Adding upstream version 4.19.249.upstream/4.19.249upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | drivers/iio/temperature/mlx90614.c | 665 |
1 files changed, 665 insertions, 0 deletions
diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c new file mode 100644 index 000000000..13a4cec64 --- /dev/null +++ b/drivers/iio/temperature/mlx90614.c @@ -0,0 +1,665 @@ +/* + * mlx90614.c - Support for Melexis MLX90614 contactless IR temperature sensor + * + * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net> + * Copyright (c) 2015 Essensium NV + * Copyright (c) 2015 Melexis + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * Driver for the Melexis MLX90614 I2C 16-bit IR thermopile sensor + * + * (7-bit I2C slave address 0x5a, 100KHz bus speed only!) + * + * To wake up from sleep mode, the SDA line must be held low while SCL is high + * for at least 33ms. This is achieved with an extra GPIO that can be connected + * directly to the SDA line. In normal operation, the GPIO is set as input and + * will not interfere in I2C communication. While the GPIO is driven low, the + * i2c adapter is locked since it cannot be used by other clients. The SCL line + * always has a pull-up so we do not need an extra GPIO to drive it high. If + * the "wakeup" GPIO is not given, power management will be disabled. + * + */ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/jiffies.h> +#include <linux/gpio/consumer.h> +#include <linux/pm_runtime.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define MLX90614_OP_RAM 0x00 +#define MLX90614_OP_EEPROM 0x20 +#define MLX90614_OP_SLEEP 0xff + +/* RAM offsets with 16-bit data, MSB first */ +#define MLX90614_RAW1 (MLX90614_OP_RAM | 0x04) /* raw data IR channel 1 */ +#define MLX90614_RAW2 (MLX90614_OP_RAM | 0x05) /* raw data IR channel 2 */ +#define MLX90614_TA (MLX90614_OP_RAM | 0x06) /* ambient temperature */ +#define MLX90614_TOBJ1 (MLX90614_OP_RAM | 0x07) /* object 1 temperature */ +#define MLX90614_TOBJ2 (MLX90614_OP_RAM | 0x08) /* object 2 temperature */ + +/* EEPROM offsets with 16-bit data, MSB first */ +#define MLX90614_EMISSIVITY (MLX90614_OP_EEPROM | 0x04) /* emissivity correction coefficient */ +#define MLX90614_CONFIG (MLX90614_OP_EEPROM | 0x05) /* configuration register */ + +/* Control bits in configuration register */ +#define MLX90614_CONFIG_IIR_SHIFT 0 /* IIR coefficient */ +#define MLX90614_CONFIG_IIR_MASK (0x7 << MLX90614_CONFIG_IIR_SHIFT) +#define MLX90614_CONFIG_DUAL_SHIFT 6 /* single (0) or dual (1) IR sensor */ +#define MLX90614_CONFIG_DUAL_MASK (1 << MLX90614_CONFIG_DUAL_SHIFT) +#define MLX90614_CONFIG_FIR_SHIFT 8 /* FIR coefficient */ +#define MLX90614_CONFIG_FIR_MASK (0x7 << MLX90614_CONFIG_FIR_SHIFT) +#define MLX90614_CONFIG_GAIN_SHIFT 11 /* gain */ +#define MLX90614_CONFIG_GAIN_MASK (0x7 << MLX90614_CONFIG_GAIN_SHIFT) + +/* Timings (in ms) */ +#define MLX90614_TIMING_EEPROM 20 /* time for EEPROM write/erase to complete */ +#define MLX90614_TIMING_WAKEUP 34 /* time to hold SDA low for wake-up */ +#define MLX90614_TIMING_STARTUP 250 /* time before first data after wake-up */ + +#define MLX90614_AUTOSLEEP_DELAY 5000 /* default autosleep delay */ + +/* Magic constants */ +#define MLX90614_CONST_OFFSET_DEC -13657 /* decimal part of the Kelvin offset */ +#define MLX90614_CONST_OFFSET_REM 500000 /* remainder of offset (273.15*50) */ +#define MLX90614_CONST_SCALE 20 /* Scale in milliKelvin (0.02 * 1000) */ +#define MLX90614_CONST_RAW_EMISSIVITY_MAX 65535 /* max value for emissivity */ +#define MLX90614_CONST_EMISSIVITY_RESOLUTION 15259 /* 1/65535 ~ 0.000015259 */ +#define MLX90614_CONST_FIR 0x7 /* Fixed value for FIR part of low pass filter */ + +struct mlx90614_data { + struct i2c_client *client; + struct mutex lock; /* for EEPROM access only */ + struct gpio_desc *wakeup_gpio; /* NULL to disable sleep/wake-up */ + unsigned long ready_timestamp; /* in jiffies */ +}; + +/* Bandwidth values for IIR filtering */ +static const int mlx90614_iir_values[] = {77, 31, 20, 15, 723, 153, 110, 86}; +static IIO_CONST_ATTR(in_temp_object_filter_low_pass_3db_frequency_available, + "0.15 0.20 0.31 0.77 0.86 1.10 1.53 7.23"); + +static struct attribute *mlx90614_attributes[] = { + &iio_const_attr_in_temp_object_filter_low_pass_3db_frequency_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group mlx90614_attr_group = { + .attrs = mlx90614_attributes, +}; + +/* + * Erase an address and write word. + * The mutex must be locked before calling. + */ +static s32 mlx90614_write_word(const struct i2c_client *client, u8 command, + u16 value) +{ + /* + * Note: The mlx90614 requires a PEC on writing but does not send us a + * valid PEC on reading. Hence, we cannot set I2C_CLIENT_PEC in + * i2c_client.flags. As a workaround, we use i2c_smbus_xfer here. + */ + union i2c_smbus_data data; + s32 ret; + + dev_dbg(&client->dev, "Writing 0x%x to address 0x%x", value, command); + + data.word = 0x0000; /* erase command */ + ret = i2c_smbus_xfer(client->adapter, client->addr, + client->flags | I2C_CLIENT_PEC, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_WORD_DATA, &data); + if (ret < 0) + return ret; + + msleep(MLX90614_TIMING_EEPROM); + + data.word = value; /* actual write */ + ret = i2c_smbus_xfer(client->adapter, client->addr, + client->flags | I2C_CLIENT_PEC, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_WORD_DATA, &data); + + msleep(MLX90614_TIMING_EEPROM); + + return ret; +} + +/* + * Find the IIR value inside mlx90614_iir_values array and return its position + * which is equivalent to the bit value in sensor register + */ +static inline s32 mlx90614_iir_search(const struct i2c_client *client, + int value) +{ + int i; + s32 ret; + + for (i = 0; i < ARRAY_SIZE(mlx90614_iir_values); ++i) { + if (value == mlx90614_iir_values[i]) + break; + } + + if (i == ARRAY_SIZE(mlx90614_iir_values)) + return -EINVAL; + + /* + * CONFIG register values must not be changed so + * we must read them before we actually write + * changes + */ + ret = i2c_smbus_read_word_data(client, MLX90614_CONFIG); + if (ret < 0) + return ret; + + ret &= ~MLX90614_CONFIG_FIR_MASK; + ret |= MLX90614_CONST_FIR << MLX90614_CONFIG_FIR_SHIFT; + ret &= ~MLX90614_CONFIG_IIR_MASK; + ret |= i << MLX90614_CONFIG_IIR_SHIFT; + + /* Write changed values */ + ret = mlx90614_write_word(client, MLX90614_CONFIG, ret); + return ret; +} + +#ifdef CONFIG_PM +/* + * If @startup is true, make sure MLX90614_TIMING_STARTUP ms have elapsed since + * the last wake-up. This is normally only needed to get a valid temperature + * reading. EEPROM access does not need such delay. + * Return 0 on success, <0 on error. + */ +static int mlx90614_power_get(struct mlx90614_data *data, bool startup) +{ + unsigned long now; + + if (!data->wakeup_gpio) + return 0; + + pm_runtime_get_sync(&data->client->dev); + + if (startup) { + now = jiffies; + if (time_before(now, data->ready_timestamp) && + msleep_interruptible(jiffies_to_msecs( + data->ready_timestamp - now)) != 0) { + pm_runtime_put_autosuspend(&data->client->dev); + return -EINTR; + } + } + + return 0; +} + +static void mlx90614_power_put(struct mlx90614_data *data) +{ + if (!data->wakeup_gpio) + return; + + pm_runtime_mark_last_busy(&data->client->dev); + pm_runtime_put_autosuspend(&data->client->dev); +} +#else +static inline int mlx90614_power_get(struct mlx90614_data *data, bool startup) +{ + return 0; +} + +static inline void mlx90614_power_put(struct mlx90614_data *data) +{ +} +#endif + +static int mlx90614_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, int *val, + int *val2, long mask) +{ + struct mlx90614_data *data = iio_priv(indio_dev); + u8 cmd; + s32 ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: /* 0.02K / LSB */ + switch (channel->channel2) { + case IIO_MOD_TEMP_AMBIENT: + cmd = MLX90614_TA; + break; + case IIO_MOD_TEMP_OBJECT: + switch (channel->channel) { + case 0: + cmd = MLX90614_TOBJ1; + break; + case 1: + cmd = MLX90614_TOBJ2; + break; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + + ret = mlx90614_power_get(data, true); + if (ret < 0) + return ret; + ret = i2c_smbus_read_word_data(data->client, cmd); + mlx90614_power_put(data); + + if (ret < 0) + return ret; + + /* MSB is an error flag */ + if (ret & 0x8000) + return -EIO; + + *val = ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_OFFSET: + *val = MLX90614_CONST_OFFSET_DEC; + *val2 = MLX90614_CONST_OFFSET_REM; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_SCALE: + *val = MLX90614_CONST_SCALE; + return IIO_VAL_INT; + case IIO_CHAN_INFO_CALIBEMISSIVITY: /* 1/65535 / LSB */ + mlx90614_power_get(data, false); + mutex_lock(&data->lock); + ret = i2c_smbus_read_word_data(data->client, + MLX90614_EMISSIVITY); + mutex_unlock(&data->lock); + mlx90614_power_put(data); + + if (ret < 0) + return ret; + + if (ret == MLX90614_CONST_RAW_EMISSIVITY_MAX) { + *val = 1; + *val2 = 0; + } else { + *val = 0; + *val2 = ret * MLX90614_CONST_EMISSIVITY_RESOLUTION; + } + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: /* IIR setting with + FIR = 1024 */ + mlx90614_power_get(data, false); + mutex_lock(&data->lock); + ret = i2c_smbus_read_word_data(data->client, MLX90614_CONFIG); + mutex_unlock(&data->lock); + mlx90614_power_put(data); + + if (ret < 0) + return ret; + + *val = mlx90614_iir_values[ret & MLX90614_CONFIG_IIR_MASK] / 100; + *val2 = (mlx90614_iir_values[ret & MLX90614_CONFIG_IIR_MASK] % 100) * + 10000; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static int mlx90614_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, int val, + int val2, long mask) +{ + struct mlx90614_data *data = iio_priv(indio_dev); + s32 ret; + + switch (mask) { + case IIO_CHAN_INFO_CALIBEMISSIVITY: /* 1/65535 / LSB */ + if (val < 0 || val2 < 0 || val > 1 || (val == 1 && val2 != 0)) + return -EINVAL; + val = val * MLX90614_CONST_RAW_EMISSIVITY_MAX + + val2 / MLX90614_CONST_EMISSIVITY_RESOLUTION; + + mlx90614_power_get(data, false); + mutex_lock(&data->lock); + ret = mlx90614_write_word(data->client, MLX90614_EMISSIVITY, + val); + mutex_unlock(&data->lock); + mlx90614_power_put(data); + + return ret; + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: /* IIR Filter setting */ + if (val < 0 || val2 < 0) + return -EINVAL; + + mlx90614_power_get(data, false); + mutex_lock(&data->lock); + ret = mlx90614_iir_search(data->client, + val * 100 + val2 / 10000); + mutex_unlock(&data->lock); + mlx90614_power_put(data); + + return ret; + default: + return -EINVAL; + } +} + +static int mlx90614_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, + long mask) +{ + switch (mask) { + case IIO_CHAN_INFO_CALIBEMISSIVITY: + return IIO_VAL_INT_PLUS_NANO; + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static const struct iio_chan_spec mlx90614_channels[] = { + { + .type = IIO_TEMP, + .modified = 1, + .channel2 = IIO_MOD_TEMP_AMBIENT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE), + }, + { + .type = IIO_TEMP, + .modified = 1, + .channel2 = IIO_MOD_TEMP_OBJECT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_CALIBEMISSIVITY) | + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE), + }, + { + .type = IIO_TEMP, + .indexed = 1, + .modified = 1, + .channel = 1, + .channel2 = IIO_MOD_TEMP_OBJECT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_CALIBEMISSIVITY) | + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) | + BIT(IIO_CHAN_INFO_SCALE), + }, +}; + +static const struct iio_info mlx90614_info = { + .read_raw = mlx90614_read_raw, + .write_raw = mlx90614_write_raw, + .write_raw_get_fmt = mlx90614_write_raw_get_fmt, + .attrs = &mlx90614_attr_group, +}; + +#ifdef CONFIG_PM +static int mlx90614_sleep(struct mlx90614_data *data) +{ + s32 ret; + + if (!data->wakeup_gpio) { + dev_dbg(&data->client->dev, "Sleep disabled"); + return -ENOSYS; + } + + dev_dbg(&data->client->dev, "Requesting sleep"); + + mutex_lock(&data->lock); + ret = i2c_smbus_xfer(data->client->adapter, data->client->addr, + data->client->flags | I2C_CLIENT_PEC, + I2C_SMBUS_WRITE, MLX90614_OP_SLEEP, + I2C_SMBUS_BYTE, NULL); + mutex_unlock(&data->lock); + + return ret; +} + +static int mlx90614_wakeup(struct mlx90614_data *data) +{ + if (!data->wakeup_gpio) { + dev_dbg(&data->client->dev, "Wake-up disabled"); + return -ENOSYS; + } + + dev_dbg(&data->client->dev, "Requesting wake-up"); + + i2c_lock_bus(data->client->adapter, I2C_LOCK_ROOT_ADAPTER); + gpiod_direction_output(data->wakeup_gpio, 0); + msleep(MLX90614_TIMING_WAKEUP); + gpiod_direction_input(data->wakeup_gpio); + i2c_unlock_bus(data->client->adapter, I2C_LOCK_ROOT_ADAPTER); + + data->ready_timestamp = jiffies + + msecs_to_jiffies(MLX90614_TIMING_STARTUP); + + /* + * Quirk: the i2c controller may get confused right after the + * wake-up signal has been sent. As a workaround, do a dummy read. + * If the read fails, the controller will probably be reset so that + * further reads will work. + */ + i2c_smbus_read_word_data(data->client, MLX90614_CONFIG); + + return 0; +} + +/* Return wake-up GPIO or NULL if sleep functionality should be disabled. */ +static struct gpio_desc *mlx90614_probe_wakeup(struct i2c_client *client) +{ + struct gpio_desc *gpio; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_BYTE)) { + dev_info(&client->dev, + "i2c adapter does not support SMBUS_WRITE_BYTE, sleep disabled"); + return NULL; + } + + gpio = devm_gpiod_get_optional(&client->dev, "wakeup", GPIOD_IN); + + if (IS_ERR(gpio)) { + dev_warn(&client->dev, + "gpio acquisition failed with error %ld, sleep disabled", + PTR_ERR(gpio)); + return NULL; + } else if (!gpio) { + dev_info(&client->dev, + "wakeup-gpio not found, sleep disabled"); + } + + return gpio; +} +#else +static inline int mlx90614_sleep(struct mlx90614_data *data) +{ + return -ENOSYS; +} +static inline int mlx90614_wakeup(struct mlx90614_data *data) +{ + return -ENOSYS; +} +static inline struct gpio_desc *mlx90614_probe_wakeup(struct i2c_client *client) +{ + return NULL; +} +#endif + +/* Return 0 for single sensor, 1 for dual sensor, <0 on error. */ +static int mlx90614_probe_num_ir_sensors(struct i2c_client *client) +{ + s32 ret; + + ret = i2c_smbus_read_word_data(client, MLX90614_CONFIG); + + if (ret < 0) + return ret; + + return (ret & MLX90614_CONFIG_DUAL_MASK) ? 1 : 0; +} + +static int mlx90614_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *indio_dev; + struct mlx90614_data *data; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return -EOPNOTSUPP; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + mutex_init(&data->lock); + data->wakeup_gpio = mlx90614_probe_wakeup(client); + + mlx90614_wakeup(data); + + indio_dev->dev.parent = &client->dev; + indio_dev->name = id->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &mlx90614_info; + + ret = mlx90614_probe_num_ir_sensors(client); + switch (ret) { + case 0: + dev_dbg(&client->dev, "Found single sensor"); + indio_dev->channels = mlx90614_channels; + indio_dev->num_channels = 2; + break; + case 1: + dev_dbg(&client->dev, "Found dual sensor"); + indio_dev->channels = mlx90614_channels; + indio_dev->num_channels = 3; + break; + default: + return ret; + } + + if (data->wakeup_gpio) { + pm_runtime_set_autosuspend_delay(&client->dev, + MLX90614_AUTOSLEEP_DELAY); + pm_runtime_use_autosuspend(&client->dev); + pm_runtime_set_active(&client->dev); + pm_runtime_enable(&client->dev); + } + + return iio_device_register(indio_dev); +} + +static int mlx90614_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct mlx90614_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + + if (data->wakeup_gpio) { + pm_runtime_disable(&client->dev); + if (!pm_runtime_status_suspended(&client->dev)) + mlx90614_sleep(data); + pm_runtime_set_suspended(&client->dev); + } + + return 0; +} + +static const struct i2c_device_id mlx90614_id[] = { + { "mlx90614", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mlx90614_id); + +static const struct of_device_id mlx90614_of_match[] = { + { .compatible = "melexis,mlx90614" }, + { } +}; +MODULE_DEVICE_TABLE(of, mlx90614_of_match); + +#ifdef CONFIG_PM_SLEEP +static int mlx90614_pm_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct mlx90614_data *data = iio_priv(indio_dev); + + if (data->wakeup_gpio && pm_runtime_active(dev)) + return mlx90614_sleep(data); + + return 0; +} + +static int mlx90614_pm_resume(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct mlx90614_data *data = iio_priv(indio_dev); + int err; + + if (data->wakeup_gpio) { + err = mlx90614_wakeup(data); + if (err < 0) + return err; + + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + } + + return 0; +} +#endif + +#ifdef CONFIG_PM +static int mlx90614_pm_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct mlx90614_data *data = iio_priv(indio_dev); + + return mlx90614_sleep(data); +} + +static int mlx90614_pm_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev)); + struct mlx90614_data *data = iio_priv(indio_dev); + + return mlx90614_wakeup(data); +} +#endif + +static const struct dev_pm_ops mlx90614_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(mlx90614_pm_suspend, mlx90614_pm_resume) + SET_RUNTIME_PM_OPS(mlx90614_pm_runtime_suspend, + mlx90614_pm_runtime_resume, NULL) +}; + +static struct i2c_driver mlx90614_driver = { + .driver = { + .name = "mlx90614", + .of_match_table = mlx90614_of_match, + .pm = &mlx90614_pm_ops, + }, + .probe = mlx90614_probe, + .remove = mlx90614_remove, + .id_table = mlx90614_id, +}; +module_i2c_driver(mlx90614_driver); + +MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); +MODULE_AUTHOR("Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com>"); +MODULE_AUTHOR("Crt Mori <cmo@melexis.com>"); +MODULE_DESCRIPTION("Melexis MLX90614 contactless IR temperature sensor driver"); +MODULE_LICENSE("GPL"); |