Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 246 insertions, 0 deletions

diff --git a/drivers/infiniband/hw/hfi1/qsfp.h b/drivers/infiniband/hw/hfi1/qsfp.h
new file mode 100644
index 000000000..36cf52359
--- /dev/null
+++ b/drivers/infiniband/hw/hfi1/qsfp.h
@@ -0,0 +1,246 @@
+/*
+ * Copyright(c) 2015, 2016 Intel Corporation.
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+/* QSFP support common definitions, for hfi driver */
+
+#define QSFP_DEV 0xA0
+#define QSFP_PWR_LAG_MSEC 2000
+#define QSFP_MODPRS_LAG_MSEC 20
+/* 128 byte pages, per SFF 8636 rev 2.4 */
+#define QSFP_MAX_NUM_PAGES	5
+
+/*
+ * Below are masks for QSFP pins.  Pins are the same for HFI0 and HFI1.
+ * _N means asserted low
+ */
+#define QSFP_HFI0_I2CCLK    BIT(0)
+#define QSFP_HFI0_I2CDAT    BIT(1)
+#define QSFP_HFI0_RESET_N   BIT(2)
+#define QSFP_HFI0_INT_N	    BIT(3)
+#define QSFP_HFI0_MODPRST_N BIT(4)
+
+/* QSFP is paged at 256 bytes */
+#define QSFP_PAGESIZE 256
+/* Reads/writes cannot cross 128 byte boundaries */
+#define QSFP_RW_BOUNDARY 128
+
+/* number of bytes in i2c offset for QSFP devices */
+#define __QSFP_OFFSET_SIZE 1                           /* num address bytes */
+#define QSFP_OFFSET_SIZE (__QSFP_OFFSET_SIZE << 8)     /* shifted value */
+
+/* Defined fields that Intel requires of qualified cables */
+/* Byte 0 is Identifier, not checked */
+/* Byte 1 is reserved "status MSB" */
+#define QSFP_MONITOR_VAL_START 22
+#define QSFP_MONITOR_VAL_END 81
+#define QSFP_MONITOR_RANGE (QSFP_MONITOR_VAL_END - QSFP_MONITOR_VAL_START + 1)
+#define QSFP_TX_CTRL_BYTE_OFFS 86
+#define QSFP_PWR_CTRL_BYTE_OFFS 93
+#define QSFP_CDR_CTRL_BYTE_OFFS 98
+
+#define QSFP_PAGE_SELECT_BYTE_OFFS 127
+/* Byte 128 is Identifier: must be 0x0c for QSFP, or 0x0d for QSFP+ */
+#define QSFP_MOD_ID_OFFS 128
+/*
+ * Byte 129 is "Extended Identifier".
+ * For bits [7:6]: 0:1.5W, 1:2.0W, 2:2.5W, 3:3.5W
+ * For bits [1:0]: 0:Unused, 1:4W, 2:4.5W, 3:5W
+ */
+#define QSFP_MOD_PWR_OFFS 129
+/* Byte 130 is Connector type. Not Intel req'd */
+/* Bytes 131..138 are Transceiver types, bit maps for various tech, none IB */
+/* Byte 139 is encoding. code 0x01 is 8b10b. Not Intel req'd */
+/* byte 140 is nominal bit-rate, in units of 100Mbits/sec */
+#define QSFP_NOM_BIT_RATE_100_OFFS 140
+/* Byte 141 is Extended Rate Select. Not Intel req'd */
+/* Bytes 142..145 are lengths for various fiber types. Not Intel req'd */
+/* Byte 146 is length for Copper. Units of 1 meter */
+#define QSFP_MOD_LEN_OFFS 146
+/*
+ * Byte 147 is Device technology. D0..3 not Intel req'd
+ * D4..7 select from 15 choices, translated by table:
+ */
+#define QSFP_MOD_TECH_OFFS 147
+extern const char *const hfi1_qsfp_devtech[16];
+/* Active Equalization includes fiber, copper full EQ, and copper near Eq */
+#define QSFP_IS_ACTIVE(tech) ((0xA2FF >> ((tech) >> 4)) & 1)
+/* Active Equalization includes fiber, copper full EQ, and copper far Eq */
+#define QSFP_IS_ACTIVE_FAR(tech) ((0x32FF >> ((tech) >> 4)) & 1)
+/* Attenuation should be valid for copper other than full/near Eq */
+#define QSFP_HAS_ATTEN(tech) ((0x4D00 >> ((tech) >> 4)) & 1)
+/* Length is only valid if technology is "copper" */
+#define QSFP_IS_CU(tech) ((0xED00 >> ((tech) >> 4)) & 1)
+#define QSFP_TECH_1490 9
+
+#define QSFP_OUI(oui) (((unsigned)oui[0] << 16) | ((unsigned)oui[1] << 8) | \
+			oui[2])
+#define QSFP_OUI_AMPHENOL 0x415048
+#define QSFP_OUI_FINISAR  0x009065
+#define QSFP_OUI_GORE     0x002177
+
+/* Bytes 148..163 are Vendor Name, Left-justified Blank-filled */
+#define QSFP_VEND_OFFS 148
+#define QSFP_VEND_LEN 16
+/* Byte 164 is IB Extended transceiver codes Bits D0..3 are SDR,DDR,QDR,EDR */
+#define QSFP_IBXCV_OFFS 164
+/* Bytes 165..167 are Vendor OUI number */
+#define QSFP_VOUI_OFFS 165
+#define QSFP_VOUI_LEN 3
+/* Bytes 168..183 are Vendor Part Number, string */
+#define QSFP_PN_OFFS 168
+#define QSFP_PN_LEN 16
+/* Bytes 184,185 are Vendor Rev. Left Justified, Blank-filled */
+#define QSFP_REV_OFFS 184
+#define QSFP_REV_LEN 2
+/*
+ * Bytes 186,187 are Wavelength, if Optical. Not Intel req'd
+ *  If copper, they are attenuation in dB:
+ * Byte 186 is at 2.5Gb/sec (SDR), Byte 187 at 5.0Gb/sec (DDR)
+ */
+#define QSFP_ATTEN_OFFS 186
+#define QSFP_ATTEN_LEN 2
+/*
+ * Bytes 188,189 are Wavelength tolerance, if optical
+ * If copper, they are attenuation in dB:
+ * Byte 188 is at 12.5 Gb/s, Byte 189 at 25 Gb/s
+ */
+#define QSFP_CU_ATTEN_7G_OFFS 188
+#define QSFP_CU_ATTEN_12G_OFFS 189
+/* Byte 190 is Max Case Temp. Not Intel req'd */
+/* Byte 191 is LSB of sum of bytes 128..190. Not Intel req'd */
+#define QSFP_CC_OFFS 191
+#define QSFP_EQ_INFO_OFFS 193
+#define QSFP_CDR_INFO_OFFS 194
+/* Bytes 196..211 are Serial Number, String */
+#define QSFP_SN_OFFS 196
+#define QSFP_SN_LEN 16
+/* Bytes 212..219 are date-code YYMMDD (MM==1 for Jan) */
+#define QSFP_DATE_OFFS 212
+#define QSFP_DATE_LEN 6
+/* Bytes 218,219 are optional lot-code, string */
+#define QSFP_LOT_OFFS 218
+#define QSFP_LOT_LEN 2
+/* Bytes 220, 221 indicate monitoring options, Not Intel req'd */
+/* Byte 222 indicates nominal bitrate in units of 250Mbits/sec */
+#define QSFP_NOM_BIT_RATE_250_OFFS 222
+/* Byte 223 is LSB of sum of bytes 192..222 */
+#define QSFP_CC_EXT_OFFS 223
+
+/*
+ * Interrupt flag masks
+ */
+#define QSFP_DATA_NOT_READY		0x01
+
+#define QSFP_HIGH_TEMP_ALARM		0x80
+#define QSFP_LOW_TEMP_ALARM		0x40
+#define QSFP_HIGH_TEMP_WARNING		0x20
+#define QSFP_LOW_TEMP_WARNING		0x10
+
+#define QSFP_HIGH_VCC_ALARM		0x80
+#define QSFP_LOW_VCC_ALARM		0x40
+#define QSFP_HIGH_VCC_WARNING		0x20
+#define QSFP_LOW_VCC_WARNING		0x10
+
+#define QSFP_HIGH_POWER_ALARM		0x88
+#define QSFP_LOW_POWER_ALARM		0x44
+#define QSFP_HIGH_POWER_WARNING		0x22
+#define QSFP_LOW_POWER_WARNING		0x11
+
+#define QSFP_HIGH_BIAS_ALARM		0x88
+#define QSFP_LOW_BIAS_ALARM		0x44
+#define QSFP_HIGH_BIAS_WARNING		0x22
+#define QSFP_LOW_BIAS_WARNING		0x11
+
+#define QSFP_ATTEN_SDR(attenarray) (attenarray[0])
+#define QSFP_ATTEN_DDR(attenarray) (attenarray[1])
+
+/*
+ * struct qsfp_data encapsulates state of QSFP device for one port.
+ * it will be part of port-specific data if a board supports QSFP.
+ *
+ * Since multiple board-types use QSFP, and their pport_data structs
+ * differ (in the chip-specific section), we need a pointer to its head.
+ *
+ * Avoiding premature optimization, we will have one work_struct per port,
+ * and let the qsfp_lock arbitrate access to common resources.
+ *
+ */
+struct qsfp_data {
+	/* Helps to find our way */
+	struct hfi1_pportdata *ppd;
+	struct work_struct qsfp_work;
+	u8 cache[QSFP_MAX_NUM_PAGES * 128];
+	/* protect qsfp data */
+	spinlock_t qsfp_lock;
+	u8 check_interrupt_flags;
+	u8 reset_needed;
+	u8 limiting_active;
+	u8 cache_valid;
+	u8 cache_refresh_required;
+};
+
+int refresh_qsfp_cache(struct hfi1_pportdata *ppd,
+		       struct qsfp_data *cp);
+int get_qsfp_power_class(u8 power_byte);
+int qsfp_mod_present(struct hfi1_pportdata *ppd);
+int get_cable_info(struct hfi1_devdata *dd, u32 port_num, u32 addr,
+		   u32 len, u8 *data);
+
+int i2c_write(struct hfi1_pportdata *ppd, u32 target, int i2c_addr,
+	      int offset, void *bp, int len);
+int i2c_read(struct hfi1_pportdata *ppd, u32 target, int i2c_addr,
+	     int offset, void *bp, int len);
+int qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
+	       int len);
+int qsfp_read(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
+	      int len);
+int one_qsfp_write(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
+		   int len);
+int one_qsfp_read(struct hfi1_pportdata *ppd, u32 target, int addr, void *bp,
+		  int len);
+struct hfi1_asic_data;
+int set_up_i2c(struct hfi1_devdata *dd, struct hfi1_asic_data *ad);
+void clean_up_i2c(struct hfi1_devdata *dd, struct hfi1_asic_data *ad);