Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 906 insertions, 0 deletions

diff --git a/drivers/infiniband/hw/qib/qib_diag.c b/drivers/infiniband/hw/qib/qib_diag.c
new file mode 100644
index 000000000..11da796dd
--- /dev/null
+++ b/drivers/infiniband/hw/qib/qib_diag.c
@@ -0,0 +1,906 @@
+/*
+ * Copyright (c) 2012 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * This file contains support for diagnostic functions.  It is accessed by
+ * opening the qib_diag device, normally minor number 129.  Diagnostic use
+ * of the QLogic_IB chip may render the chip or board unusable until the
+ * driver is unloaded, or in some cases, until the system is rebooted.
+ *
+ * Accesses to the chip through this interface are not similar to going
+ * through the /sys/bus/pci resource mmap interface.
+ */
+
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/poll.h>
+#include <linux/vmalloc.h>
+#include <linux/export.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+
+#include "qib.h"
+#include "qib_common.h"
+
+#undef pr_fmt
+#define pr_fmt(fmt) QIB_DRV_NAME ": " fmt
+
+/*
+ * Each client that opens the diag device must read then write
+ * offset 0, to prevent lossage from random cat or od. diag_state
+ * sequences this "handshake".
+ */
+enum diag_state { UNUSED = 0, OPENED, INIT, READY };
+
+/* State for an individual client. PID so children cannot abuse handshake */
+static struct qib_diag_client {
+	struct qib_diag_client *next;
+	struct qib_devdata *dd;
+	pid_t pid;
+	enum diag_state state;
+} *client_pool;
+
+/*
+ * Get a client struct. Recycled if possible, else kmalloc.
+ * Must be called with qib_mutex held
+ */
+static struct qib_diag_client *get_client(struct qib_devdata *dd)
+{
+	struct qib_diag_client *dc;
+
+	dc = client_pool;
+	if (dc)
+		/* got from pool remove it and use */
+		client_pool = dc->next;
+	else
+		/* None in pool, alloc and init */
+		dc = kmalloc(sizeof(*dc), GFP_KERNEL);
+
+	if (dc) {
+		dc->next = NULL;
+		dc->dd = dd;
+		dc->pid = current->pid;
+		dc->state = OPENED;
+	}
+	return dc;
+}
+
+/*
+ * Return to pool. Must be called with qib_mutex held
+ */
+static void return_client(struct qib_diag_client *dc)
+{
+	struct qib_devdata *dd = dc->dd;
+	struct qib_diag_client *tdc, *rdc;
+
+	rdc = NULL;
+	if (dc == dd->diag_client) {
+		dd->diag_client = dc->next;
+		rdc = dc;
+	} else {
+		tdc = dc->dd->diag_client;
+		while (tdc) {
+			if (dc == tdc->next) {
+				tdc->next = dc->next;
+				rdc = dc;
+				break;
+			}
+			tdc = tdc->next;
+		}
+	}
+	if (rdc) {
+		rdc->state = UNUSED;
+		rdc->dd = NULL;
+		rdc->pid = 0;
+		rdc->next = client_pool;
+		client_pool = rdc;
+	}
+}
+
+static int qib_diag_open(struct inode *in, struct file *fp);
+static int qib_diag_release(struct inode *in, struct file *fp);
+static ssize_t qib_diag_read(struct file *fp, char __user *data,
+			     size_t count, loff_t *off);
+static ssize_t qib_diag_write(struct file *fp, const char __user *data,
+			      size_t count, loff_t *off);
+
+static const struct file_operations diag_file_ops = {
+	.owner = THIS_MODULE,
+	.write = qib_diag_write,
+	.read = qib_diag_read,
+	.open = qib_diag_open,
+	.release = qib_diag_release,
+	.llseek = default_llseek,
+};
+
+static atomic_t diagpkt_count = ATOMIC_INIT(0);
+static struct cdev *diagpkt_cdev;
+static struct device *diagpkt_device;
+
+static ssize_t qib_diagpkt_write(struct file *fp, const char __user *data,
+				 size_t count, loff_t *off);
+
+static const struct file_operations diagpkt_file_ops = {
+	.owner = THIS_MODULE,
+	.write = qib_diagpkt_write,
+	.llseek = noop_llseek,
+};
+
+int qib_diag_add(struct qib_devdata *dd)
+{
+	char name[16];
+	int ret = 0;
+
+	if (atomic_inc_return(&diagpkt_count) == 1) {
+		ret = qib_cdev_init(QIB_DIAGPKT_MINOR, "ipath_diagpkt",
+				    &diagpkt_file_ops, &diagpkt_cdev,
+				    &diagpkt_device);
+		if (ret)
+			goto done;
+	}
+
+	snprintf(name, sizeof(name), "ipath_diag%d", dd->unit);
+	ret = qib_cdev_init(QIB_DIAG_MINOR_BASE + dd->unit, name,
+			    &diag_file_ops, &dd->diag_cdev,
+			    &dd->diag_device);
+done:
+	return ret;
+}
+
+static void qib_unregister_observers(struct qib_devdata *dd);
+
+void qib_diag_remove(struct qib_devdata *dd)
+{
+	struct qib_diag_client *dc;
+
+	if (atomic_dec_and_test(&diagpkt_count))
+		qib_cdev_cleanup(&diagpkt_cdev, &diagpkt_device);
+
+	qib_cdev_cleanup(&dd->diag_cdev, &dd->diag_device);
+
+	/*
+	 * Return all diag_clients of this device. There should be none,
+	 * as we are "guaranteed" that no clients are still open
+	 */
+	while (dd->diag_client)
+		return_client(dd->diag_client);
+
+	/* Now clean up all unused client structs */
+	while (client_pool) {
+		dc = client_pool;
+		client_pool = dc->next;
+		kfree(dc);
+	}
+	/* Clean up observer list */
+	qib_unregister_observers(dd);
+}
+
+/* qib_remap_ioaddr32 - remap an offset into chip address space to __iomem *
+ *
+ * @dd: the qlogic_ib device
+ * @offs: the offset in chip-space
+ * @cntp: Pointer to max (byte) count for transfer starting at offset
+ * This returns a u32 __iomem * so it can be used for both 64 and 32-bit
+ * mapping. It is needed because with the use of PAT for control of
+ * write-combining, the logically contiguous address-space of the chip
+ * may be split into virtually non-contiguous spaces, with different
+ * attributes, which are them mapped to contiguous physical space
+ * based from the first BAR.
+ *
+ * The code below makes the same assumptions as were made in
+ * init_chip_wc_pat() (qib_init.c), copied here:
+ * Assumes chip address space looks like:
+ *		- kregs + sregs + cregs + uregs (in any order)
+ *		- piobufs (2K and 4K bufs in either order)
+ *	or:
+ *		- kregs + sregs + cregs (in any order)
+ *		- piobufs (2K and 4K bufs in either order)
+ *		- uregs
+ *
+ * If cntp is non-NULL, returns how many bytes from offset can be accessed
+ * Returns 0 if the offset is not mapped.
+ */
+static u32 __iomem *qib_remap_ioaddr32(struct qib_devdata *dd, u32 offset,
+				       u32 *cntp)
+{
+	u32 kreglen;
+	u32 snd_bottom, snd_lim = 0;
+	u32 __iomem *krb32 = (u32 __iomem *)dd->kregbase;
+	u32 __iomem *map = NULL;
+	u32 cnt = 0;
+	u32 tot4k, offs4k;
+
+	/* First, simplest case, offset is within the first map. */
+	kreglen = (dd->kregend - dd->kregbase) * sizeof(u64);
+	if (offset < kreglen) {
+		map = krb32 + (offset / sizeof(u32));
+		cnt = kreglen - offset;
+		goto mapped;
+	}
+
+	/*
+	 * Next check for user regs, the next most common case,
+	 * and a cheap check because if they are not in the first map
+	 * they are last in chip.
+	 */
+	if (dd->userbase) {
+		/* If user regs mapped, they are after send, so set limit. */
+		u32 ulim = (dd->cfgctxts * dd->ureg_align) + dd->uregbase;
+
+		if (!dd->piovl15base)
+			snd_lim = dd->uregbase;
+		krb32 = (u32 __iomem *)dd->userbase;
+		if (offset >= dd->uregbase && offset < ulim) {
+			map = krb32 + (offset - dd->uregbase) / sizeof(u32);
+			cnt = ulim - offset;
+			goto mapped;
+		}
+	}
+
+	/*
+	 * Lastly, check for offset within Send Buffers.
+	 * This is gnarly because struct devdata is deliberately vague
+	 * about things like 7322 VL15 buffers, and we are not in
+	 * chip-specific code here, so should not make many assumptions.
+	 * The one we _do_ make is that the only chip that has more sndbufs
+	 * than we admit is the 7322, and it has userregs above that, so
+	 * we know the snd_lim.
+	 */
+	/* Assume 2K buffers are first. */
+	snd_bottom = dd->pio2k_bufbase;
+	if (snd_lim == 0) {
+		u32 tot2k = dd->piobcnt2k * ALIGN(dd->piosize2k, dd->palign);
+
+		snd_lim = snd_bottom + tot2k;
+	}
+	/* If 4k buffers exist, account for them by bumping
+	 * appropriate limit.
+	 */
+	tot4k = dd->piobcnt4k * dd->align4k;
+	offs4k = dd->piobufbase >> 32;
+	if (dd->piobcnt4k) {
+		if (snd_bottom > offs4k)
+			snd_bottom = offs4k;
+		else {
+			/* 4k above 2k. Bump snd_lim, if needed*/
+			if (!dd->userbase || dd->piovl15base)
+				snd_lim = offs4k + tot4k;
+		}
+	}
+	/*
+	 * Judgement call: can we ignore the space between SendBuffs and
+	 * UserRegs, where we would like to see vl15 buffs, but not more?
+	 */
+	if (offset >= snd_bottom && offset < snd_lim) {
+		offset -= snd_bottom;
+		map = (u32 __iomem *)dd->piobase + (offset / sizeof(u32));
+		cnt = snd_lim - offset;
+	}
+
+	if (!map && offs4k && dd->piovl15base) {
+		snd_lim = offs4k + tot4k + 2 * dd->align4k;
+		if (offset >= (offs4k + tot4k) && offset < snd_lim) {
+			map = (u32 __iomem *)dd->piovl15base +
+				((offset - (offs4k + tot4k)) / sizeof(u32));
+			cnt = snd_lim - offset;
+		}
+	}
+
+mapped:
+	if (cntp)
+		*cntp = cnt;
+	return map;
+}
+
+/*
+ * qib_read_umem64 - read a 64-bit quantity from the chip into user space
+ * @dd: the qlogic_ib device
+ * @uaddr: the location to store the data in user memory
+ * @regoffs: the offset from BAR0 (_NOT_ full pointer, anymore)
+ * @count: number of bytes to copy (multiple of 32 bits)
+ *
+ * This function also localizes all chip memory accesses.
+ * The copy should be written such that we read full cacheline packets
+ * from the chip.  This is usually used for a single qword
+ *
+ * NOTE:  This assumes the chip address is 64-bit aligned.
+ */
+static int qib_read_umem64(struct qib_devdata *dd, void __user *uaddr,
+			   u32 regoffs, size_t count)
+{
+	const u64 __iomem *reg_addr;
+	const u64 __iomem *reg_end;
+	u32 limit;
+	int ret;
+
+	reg_addr = (const u64 __iomem *)qib_remap_ioaddr32(dd, regoffs, &limit);
+	if (reg_addr == NULL || limit == 0 || !(dd->flags & QIB_PRESENT)) {
+		ret = -EINVAL;
+		goto bail;
+	}
+	if (count >= limit)
+		count = limit;
+	reg_end = reg_addr + (count / sizeof(u64));
+
+	/* not very efficient, but it works for now */
+	while (reg_addr < reg_end) {
+		u64 data = readq(reg_addr);
+
+		if (copy_to_user(uaddr, &data, sizeof(u64))) {
+			ret = -EFAULT;
+			goto bail;
+		}
+		reg_addr++;
+		uaddr += sizeof(u64);
+	}
+	ret = 0;
+bail:
+	return ret;
+}
+
+/*
+ * qib_write_umem64 - write a 64-bit quantity to the chip from user space
+ * @dd: the qlogic_ib device
+ * @regoffs: the offset from BAR0 (_NOT_ full pointer, anymore)
+ * @uaddr: the source of the data in user memory
+ * @count: the number of bytes to copy (multiple of 32 bits)
+ *
+ * This is usually used for a single qword
+ * NOTE:  This assumes the chip address is 64-bit aligned.
+ */
+
+static int qib_write_umem64(struct qib_devdata *dd, u32 regoffs,
+			    const void __user *uaddr, size_t count)
+{
+	u64 __iomem *reg_addr;
+	const u64 __iomem *reg_end;
+	u32 limit;
+	int ret;
+
+	reg_addr = (u64 __iomem *)qib_remap_ioaddr32(dd, regoffs, &limit);
+	if (reg_addr == NULL || limit == 0 || !(dd->flags & QIB_PRESENT)) {
+		ret = -EINVAL;
+		goto bail;
+	}
+	if (count >= limit)
+		count = limit;
+	reg_end = reg_addr + (count / sizeof(u64));
+
+	/* not very efficient, but it works for now */
+	while (reg_addr < reg_end) {
+		u64 data;
+
+		if (copy_from_user(&data, uaddr, sizeof(data))) {
+			ret = -EFAULT;
+			goto bail;
+		}
+		writeq(data, reg_addr);
+
+		reg_addr++;
+		uaddr += sizeof(u64);
+	}
+	ret = 0;
+bail:
+	return ret;
+}
+
+/*
+ * qib_read_umem32 - read a 32-bit quantity from the chip into user space
+ * @dd: the qlogic_ib device
+ * @uaddr: the location to store the data in user memory
+ * @regoffs: the offset from BAR0 (_NOT_ full pointer, anymore)
+ * @count: number of bytes to copy
+ *
+ * read 32 bit values, not 64 bit; for memories that only
+ * support 32 bit reads; usually a single dword.
+ */
+static int qib_read_umem32(struct qib_devdata *dd, void __user *uaddr,
+			   u32 regoffs, size_t count)
+{
+	const u32 __iomem *reg_addr;
+	const u32 __iomem *reg_end;
+	u32 limit;
+	int ret;
+
+	reg_addr = qib_remap_ioaddr32(dd, regoffs, &limit);
+	if (reg_addr == NULL || limit == 0 || !(dd->flags & QIB_PRESENT)) {
+		ret = -EINVAL;
+		goto bail;
+	}
+	if (count >= limit)
+		count = limit;
+	reg_end = reg_addr + (count / sizeof(u32));
+
+	/* not very efficient, but it works for now */
+	while (reg_addr < reg_end) {
+		u32 data = readl(reg_addr);
+
+		if (copy_to_user(uaddr, &data, sizeof(data))) {
+			ret = -EFAULT;
+			goto bail;
+		}
+
+		reg_addr++;
+		uaddr += sizeof(u32);
+
+	}
+	ret = 0;
+bail:
+	return ret;
+}
+
+/*
+ * qib_write_umem32 - write a 32-bit quantity to the chip from user space
+ * @dd: the qlogic_ib device
+ * @regoffs: the offset from BAR0 (_NOT_ full pointer, anymore)
+ * @uaddr: the source of the data in user memory
+ * @count: number of bytes to copy
+ *
+ * write 32 bit values, not 64 bit; for memories that only
+ * support 32 bit write; usually a single dword.
+ */
+
+static int qib_write_umem32(struct qib_devdata *dd, u32 regoffs,
+			    const void __user *uaddr, size_t count)
+{
+	u32 __iomem *reg_addr;
+	const u32 __iomem *reg_end;
+	u32 limit;
+	int ret;
+
+	reg_addr = qib_remap_ioaddr32(dd, regoffs, &limit);
+	if (reg_addr == NULL || limit == 0 || !(dd->flags & QIB_PRESENT)) {
+		ret = -EINVAL;
+		goto bail;
+	}
+	if (count >= limit)
+		count = limit;
+	reg_end = reg_addr + (count / sizeof(u32));
+
+	while (reg_addr < reg_end) {
+		u32 data;
+
+		if (copy_from_user(&data, uaddr, sizeof(data))) {
+			ret = -EFAULT;
+			goto bail;
+		}
+		writel(data, reg_addr);
+
+		reg_addr++;
+		uaddr += sizeof(u32);
+	}
+	ret = 0;
+bail:
+	return ret;
+}
+
+static int qib_diag_open(struct inode *in, struct file *fp)
+{
+	int unit = iminor(in) - QIB_DIAG_MINOR_BASE;
+	struct qib_devdata *dd;
+	struct qib_diag_client *dc;
+	int ret;
+
+	mutex_lock(&qib_mutex);
+
+	dd = qib_lookup(unit);
+
+	if (dd == NULL || !(dd->flags & QIB_PRESENT) ||
+	    !dd->kregbase) {
+		ret = -ENODEV;
+		goto bail;
+	}
+
+	dc = get_client(dd);
+	if (!dc) {
+		ret = -ENOMEM;
+		goto bail;
+	}
+	dc->next = dd->diag_client;
+	dd->diag_client = dc;
+	fp->private_data = dc;
+	ret = 0;
+bail:
+	mutex_unlock(&qib_mutex);
+
+	return ret;
+}
+
+/**
+ * qib_diagpkt_write - write an IB packet
+ * @fp: the diag data device file pointer
+ * @data: qib_diag_pkt structure saying where to get the packet
+ * @count: size of data to write
+ * @off: unused by this code
+ */
+static ssize_t qib_diagpkt_write(struct file *fp,
+				 const char __user *data,
+				 size_t count, loff_t *off)
+{
+	u32 __iomem *piobuf;
+	u32 plen, pbufn, maxlen_reserve;
+	struct qib_diag_xpkt dp;
+	u32 *tmpbuf = NULL;
+	struct qib_devdata *dd;
+	struct qib_pportdata *ppd;
+	ssize_t ret = 0;
+
+	if (count != sizeof(dp)) {
+		ret = -EINVAL;
+		goto bail;
+	}
+	if (copy_from_user(&dp, data, sizeof(dp))) {
+		ret = -EFAULT;
+		goto bail;
+	}
+
+	dd = qib_lookup(dp.unit);
+	if (!dd || !(dd->flags & QIB_PRESENT) || !dd->kregbase) {
+		ret = -ENODEV;
+		goto bail;
+	}
+	if (!(dd->flags & QIB_INITTED)) {
+		/* no hardware, freeze, etc. */
+		ret = -ENODEV;
+		goto bail;
+	}
+
+	if (dp.version != _DIAG_XPKT_VERS) {
+		qib_dev_err(dd, "Invalid version %u for diagpkt_write\n",
+			    dp.version);
+		ret = -EINVAL;
+		goto bail;
+	}
+	/* send count must be an exact number of dwords */
+	if (dp.len & 3) {
+		ret = -EINVAL;
+		goto bail;
+	}
+	if (!dp.port || dp.port > dd->num_pports) {
+		ret = -EINVAL;
+		goto bail;
+	}
+	ppd = &dd->pport[dp.port - 1];
+
+	/*
+	 * need total length before first word written, plus 2 Dwords. One Dword
+	 * is for padding so we get the full user data when not aligned on
+	 * a word boundary. The other Dword is to make sure we have room for the
+	 * ICRC which gets tacked on later.
+	 */
+	maxlen_reserve = 2 * sizeof(u32);
+	if (dp.len > ppd->ibmaxlen - maxlen_reserve) {
+		ret = -EINVAL;
+		goto bail;
+	}
+
+	plen = sizeof(u32) + dp.len;
+
+	tmpbuf = vmalloc(plen);
+	if (!tmpbuf) {
+		ret = -ENOMEM;
+		goto bail;
+	}
+
+	if (copy_from_user(tmpbuf,
+			   u64_to_user_ptr(dp.data),
+			   dp.len)) {
+		ret = -EFAULT;
+		goto bail;
+	}
+
+	plen >>= 2;             /* in dwords */
+
+	if (dp.pbc_wd == 0)
+		dp.pbc_wd = plen;
+
+	piobuf = dd->f_getsendbuf(ppd, dp.pbc_wd, &pbufn);
+	if (!piobuf) {
+		ret = -EBUSY;
+		goto bail;
+	}
+	/* disarm it just to be extra sure */
+	dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_BUF(pbufn));
+
+	/* disable header check on pbufn for this packet */
+	dd->f_txchk_change(dd, pbufn, 1, TXCHK_CHG_TYPE_DIS1, NULL);
+
+	writeq(dp.pbc_wd, piobuf);
+	/*
+	 * Copy all but the trigger word, then flush, so it's written
+	 * to chip before trigger word, then write trigger word, then
+	 * flush again, so packet is sent.
+	 */
+	if (dd->flags & QIB_PIO_FLUSH_WC) {
+		qib_flush_wc();
+		qib_pio_copy(piobuf + 2, tmpbuf, plen - 1);
+		qib_flush_wc();
+		__raw_writel(tmpbuf[plen - 1], piobuf + plen + 1);
+	} else
+		qib_pio_copy(piobuf + 2, tmpbuf, plen);
+
+	if (dd->flags & QIB_USE_SPCL_TRIG) {
+		u32 spcl_off = (pbufn >= dd->piobcnt2k) ? 2047 : 1023;
+
+		qib_flush_wc();
+		__raw_writel(0xaebecede, piobuf + spcl_off);
+	}
+
+	/*
+	 * Ensure buffer is written to the chip, then re-enable
+	 * header checks (if supported by chip).  The txchk
+	 * code will ensure seen by chip before returning.
+	 */
+	qib_flush_wc();
+	qib_sendbuf_done(dd, pbufn);
+	dd->f_txchk_change(dd, pbufn, 1, TXCHK_CHG_TYPE_ENAB1, NULL);
+
+	ret = sizeof(dp);
+
+bail:
+	vfree(tmpbuf);
+	return ret;
+}
+
+static int qib_diag_release(struct inode *in, struct file *fp)
+{
+	mutex_lock(&qib_mutex);
+	return_client(fp->private_data);
+	fp->private_data = NULL;
+	mutex_unlock(&qib_mutex);
+	return 0;
+}
+
+/*
+ * Chip-specific code calls to register its interest in
+ * a specific range.
+ */
+struct diag_observer_list_elt {
+	struct diag_observer_list_elt *next;
+	const struct diag_observer *op;
+};
+
+int qib_register_observer(struct qib_devdata *dd,
+			  const struct diag_observer *op)
+{
+	struct diag_observer_list_elt *olp;
+	unsigned long flags;
+
+	if (!dd || !op)
+		return -EINVAL;
+	olp = vmalloc(sizeof(*olp));
+	if (!olp)
+		return -ENOMEM;
+
+	spin_lock_irqsave(&dd->qib_diag_trans_lock, flags);
+	olp->op = op;
+	olp->next = dd->diag_observer_list;
+	dd->diag_observer_list = olp;
+	spin_unlock_irqrestore(&dd->qib_diag_trans_lock, flags);
+
+	return 0;
+}
+
+/* Remove all registered observers when device is closed */
+static void qib_unregister_observers(struct qib_devdata *dd)
+{
+	struct diag_observer_list_elt *olp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dd->qib_diag_trans_lock, flags);
+	olp = dd->diag_observer_list;
+	while (olp) {
+		/* Pop one observer, let go of lock */
+		dd->diag_observer_list = olp->next;
+		spin_unlock_irqrestore(&dd->qib_diag_trans_lock, flags);
+		vfree(olp);
+		/* try again. */
+		spin_lock_irqsave(&dd->qib_diag_trans_lock, flags);
+		olp = dd->diag_observer_list;
+	}
+	spin_unlock_irqrestore(&dd->qib_diag_trans_lock, flags);
+}
+
+/*
+ * Find the observer, if any, for the specified address. Initial implementation
+ * is simple stack of observers. This must be called with diag transaction
+ * lock held.
+ */
+static const struct diag_observer *diag_get_observer(struct qib_devdata *dd,
+						     u32 addr)
+{
+	struct diag_observer_list_elt *olp;
+	const struct diag_observer *op = NULL;
+
+	olp = dd->diag_observer_list;
+	while (olp) {
+		op = olp->op;
+		if (addr >= op->bottom && addr <= op->top)
+			break;
+		olp = olp->next;
+	}
+	if (!olp)
+		op = NULL;
+
+	return op;
+}
+
+static ssize_t qib_diag_read(struct file *fp, char __user *data,
+			     size_t count, loff_t *off)
+{
+	struct qib_diag_client *dc = fp->private_data;
+	struct qib_devdata *dd = dc->dd;
+	ssize_t ret;
+
+	if (dc->pid != current->pid) {
+		ret = -EPERM;
+		goto bail;
+	}
+
+	if (count == 0)
+		ret = 0;
+	else if ((count % 4) || (*off % 4))
+		/* address or length is not 32-bit aligned, hence invalid */
+		ret = -EINVAL;
+	else if (dc->state < READY && (*off || count != 8))
+		ret = -EINVAL;  /* prevent cat /dev/qib_diag* */
+	else {
+		unsigned long flags;
+		u64 data64 = 0;
+		int use_32;
+		const struct diag_observer *op;
+
+		use_32 = (count % 8) || (*off % 8);
+		ret = -1;
+		spin_lock_irqsave(&dd->qib_diag_trans_lock, flags);
+		/*
+		 * Check for observer on this address range.
+		 * we only support a single 32 or 64-bit read
+		 * via observer, currently.
+		 */
+		op = diag_get_observer(dd, *off);
+		if (op) {
+			u32 offset = *off;
+
+			ret = op->hook(dd, op, offset, &data64, 0, use_32);
+		}
+		/*
+		 * We need to release lock before any copy_to_user(),
+		 * whether implicit in qib_read_umem* or explicit below.
+		 */
+		spin_unlock_irqrestore(&dd->qib_diag_trans_lock, flags);
+		if (!op) {
+			if (use_32)
+				/*
+				 * Address or length is not 64-bit aligned;
+				 * do 32-bit rd
+				 */
+				ret = qib_read_umem32(dd, data, (u32) *off,
+						      count);
+			else
+				ret = qib_read_umem64(dd, data, (u32) *off,
+						      count);
+		} else if (ret == count) {
+			/* Below finishes case where observer existed */
+			ret = copy_to_user(data, &data64, use_32 ?
+					   sizeof(u32) : sizeof(u64));
+			if (ret)
+				ret = -EFAULT;
+		}
+	}
+
+	if (ret >= 0) {
+		*off += count;
+		ret = count;
+		if (dc->state == OPENED)
+			dc->state = INIT;
+	}
+bail:
+	return ret;
+}
+
+static ssize_t qib_diag_write(struct file *fp, const char __user *data,
+			      size_t count, loff_t *off)
+{
+	struct qib_diag_client *dc = fp->private_data;
+	struct qib_devdata *dd = dc->dd;
+	ssize_t ret;
+
+	if (dc->pid != current->pid) {
+		ret = -EPERM;
+		goto bail;
+	}
+
+	if (count == 0)
+		ret = 0;
+	else if ((count % 4) || (*off % 4))
+		/* address or length is not 32-bit aligned, hence invalid */
+		ret = -EINVAL;
+	else if (dc->state < READY &&
+		((*off || count != 8) || dc->state != INIT))
+		/* No writes except second-step of init seq */
+		ret = -EINVAL;  /* before any other write allowed */
+	else {
+		unsigned long flags;
+		const struct diag_observer *op = NULL;
+		int use_32 =  (count % 8) || (*off % 8);
+
+		/*
+		 * Check for observer on this address range.
+		 * We only support a single 32 or 64-bit write
+		 * via observer, currently. This helps, because
+		 * we would otherwise have to jump through hoops
+		 * to make "diag transaction" meaningful when we
+		 * cannot do a copy_from_user while holding the lock.
+		 */
+		if (count == 4 || count == 8) {
+			u64 data64;
+			u32 offset = *off;
+
+			ret = copy_from_user(&data64, data, count);
+			if (ret) {
+				ret = -EFAULT;
+				goto bail;
+			}
+			spin_lock_irqsave(&dd->qib_diag_trans_lock, flags);
+			op = diag_get_observer(dd, *off);
+			if (op)
+				ret = op->hook(dd, op, offset, &data64, ~0Ull,
+					       use_32);
+			spin_unlock_irqrestore(&dd->qib_diag_trans_lock, flags);
+		}
+
+		if (!op) {
+			if (use_32)
+				/*
+				 * Address or length is not 64-bit aligned;
+				 * do 32-bit write
+				 */
+				ret = qib_write_umem32(dd, (u32) *off, data,
+						       count);
+			else
+				ret = qib_write_umem64(dd, (u32) *off, data,
+						       count);
+		}
+	}
+
+	if (ret >= 0) {
+		*off += count;
+		ret = count;
+		if (dc->state == INIT)
+			dc->state = READY; /* all read/write OK now */
+	}
+bail:
+	return ret;
+}