Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 183 insertions, 0 deletions

diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h
new file mode 100644
index 000000000..d3eaaf3eb
--- /dev/null
+++ b/drivers/md/raid10.h
@@ -0,0 +1,183 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _RAID10_H
+#define _RAID10_H
+
+/* Note: raid10_info.rdev can be set to NULL asynchronously by
+ * raid10_remove_disk.
+ * There are three safe ways to access raid10_info.rdev.
+ * 1/ when holding mddev->reconfig_mutex
+ * 2/ when resync/recovery/reshape is known to be happening - i.e. in code
+ *    that is called as part of performing resync/recovery/reshape.
+ * 3/ while holding rcu_read_lock(), use rcu_dereference to get the pointer
+ *    and if it is non-NULL, increment rdev->nr_pending before dropping the
+ *    RCU lock.
+ * When .rdev is set to NULL, the nr_pending count checked again and if it has
+ * been incremented, the pointer is put back in .rdev.
+ */
+
+struct raid10_info {
+	struct md_rdev	*rdev, *replacement;
+	sector_t	head_position;
+	int		recovery_disabled;	/* matches
+						 * mddev->recovery_disabled
+						 * when we shouldn't try
+						 * recovering this device.
+						 */
+};
+
+struct r10conf {
+	struct mddev		*mddev;
+	struct raid10_info	*mirrors;
+	struct raid10_info	*mirrors_new, *mirrors_old;
+	spinlock_t		device_lock;
+
+	/* geometry */
+	struct geom {
+		int		raid_disks;
+		int		near_copies;  /* number of copies laid out
+					       * raid0 style */
+		int		far_copies;   /* number of copies laid out
+					       * at large strides across drives
+					       */
+		int		far_offset;   /* far_copies are offset by 1
+					       * stripe instead of many
+					       */
+		sector_t	stride;	      /* distance between far copies.
+					       * This is size / far_copies unless
+					       * far_offset, in which case it is
+					       * 1 stripe.
+					       */
+		int             far_set_size; /* The number of devices in a set,
+					       * where a 'set' are devices that
+					       * contain far/offset copies of
+					       * each other.
+					       */
+		int		chunk_shift; /* shift from chunks to sectors */
+		sector_t	chunk_mask;
+	} prev, geo;
+	int			copies;	      /* near_copies * far_copies.
+					       * must be <= raid_disks
+					       */
+
+	sector_t		dev_sectors;  /* temp copy of
+					       * mddev->dev_sectors */
+	sector_t		reshape_progress;
+	sector_t		reshape_safe;
+	unsigned long		reshape_checkpoint;
+	sector_t		offset_diff;
+
+	struct list_head	retry_list;
+	/* A separate list of r1bio which just need raid_end_bio_io called.
+	 * This mustn't happen for writes which had any errors if the superblock
+	 * needs to be written.
+	 */
+	struct list_head	bio_end_io_list;
+
+	/* queue pending writes and submit them on unplug */
+	struct bio_list		pending_bio_list;
+	int			pending_count;
+
+	spinlock_t		resync_lock;
+	atomic_t		nr_pending;
+	int			nr_waiting;
+	int			nr_queued;
+	int			barrier;
+	int			array_freeze_pending;
+	sector_t		next_resync;
+	int			fullsync;  /* set to 1 if a full sync is needed,
+					    * (fresh device added).
+					    * Cleared when a sync completes.
+					    */
+	int			have_replacement; /* There is at least one
+						   * replacement device.
+						   */
+	wait_queue_head_t	wait_barrier;
+
+	mempool_t		r10bio_pool;
+	mempool_t		r10buf_pool;
+	struct page		*tmppage;
+	struct bio_set		bio_split;
+
+	/* When taking over an array from a different personality, we store
+	 * the new thread here until we fully activate the array.
+	 */
+	struct md_thread	*thread;
+
+	/*
+	 * Keep track of cluster resync window to send to other nodes.
+	 */
+	sector_t		cluster_sync_low;
+	sector_t		cluster_sync_high;
+};
+
+/*
+ * this is our 'private' RAID10 bio.
+ *
+ * it contains information about what kind of IO operations were started
+ * for this RAID10 operation, and about their status:
+ */
+
+struct r10bio {
+	atomic_t		remaining; /* 'have we finished' count,
+					    * used from IRQ handlers
+					    */
+	sector_t		sector;	/* virtual sector number */
+	int			sectors;
+	unsigned long		state;
+	struct mddev		*mddev;
+	/*
+	 * original bio going to /dev/mdx
+	 */
+	struct bio		*master_bio;
+	/*
+	 * if the IO is in READ direction, then this is where we read
+	 */
+	int			read_slot;
+
+	struct list_head	retry_list;
+	/*
+	 * if the IO is in WRITE direction, then multiple bios are used,
+	 * one for each copy.
+	 * When resyncing we also use one for each copy.
+	 * When reconstructing, we use 2 bios, one for read, one for write.
+	 * We choose the number when they are allocated.
+	 * We sometimes need an extra bio to write to the replacement.
+	 */
+	struct r10dev {
+		struct bio	*bio;
+		union {
+			struct bio	*repl_bio; /* used for resync and
+						    * writes */
+			struct md_rdev	*rdev;	   /* used for reads
+						    * (read_slot >= 0) */
+		};
+		sector_t	addr;
+		int		devnum;
+	} devs[0];
+};
+
+/* bits for r10bio.state */
+enum r10bio_state {
+	R10BIO_Uptodate,
+	R10BIO_IsSync,
+	R10BIO_IsRecover,
+	R10BIO_IsReshape,
+	R10BIO_Degraded,
+/* Set ReadError on bios that experience a read error
+ * so that raid10d knows what to do with them.
+ */
+	R10BIO_ReadError,
+/* If a write for this request means we can clear some
+ * known-bad-block records, we set this flag.
+ */
+	R10BIO_MadeGood,
+	R10BIO_WriteError,
+/* During a reshape we might be performing IO on the
+ * 'previous' part of the array, in which case this
+ * flag is set
+ */
+	R10BIO_Previous,
+/* failfast devices did receive failfast requests. */
+	R10BIO_FailFast,
+};
+#endif