Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 210 insertions, 0 deletions

diff --git a/drivers/misc/eeprom/max6875.c b/drivers/misc/eeprom/max6875.c
new file mode 100644
index 000000000..fc0cf9a74
--- /dev/null
+++ b/drivers/misc/eeprom/max6875.c
@@ -0,0 +1,210 @@
+/*
+ * max6875.c - driver for MAX6874/MAX6875
+ *
+ * Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
+ *
+ * Based on eeprom.c
+ *
+ * The MAX6875 has a bank of registers and two banks of EEPROM.
+ * Address ranges are defined as follows:
+ *  * 0x0000 - 0x0046 = configuration registers
+ *  * 0x8000 - 0x8046 = configuration EEPROM
+ *  * 0x8100 - 0x82FF = user EEPROM
+ *
+ * This driver makes the user EEPROM available for read.
+ *
+ * The registers & config EEPROM should be accessed via i2c-dev.
+ *
+ * The MAX6875 ignores the lowest address bit, so each chip responds to
+ * two addresses - 0x50/0x51 and 0x52/0x53.
+ *
+ * Note that the MAX6875 uses i2c_smbus_write_byte_data() to set the read
+ * address, so this driver is destructive if loaded for the wrong EEPROM chip.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+
+/* The MAX6875 can only read/write 16 bytes at a time */
+#define SLICE_SIZE			16
+#define SLICE_BITS			4
+
+/* USER EEPROM is at addresses 0x8100 - 0x82FF */
+#define USER_EEPROM_BASE		0x8100
+#define USER_EEPROM_SIZE		0x0200
+#define USER_EEPROM_SLICES		32
+
+/* MAX6875 commands */
+#define MAX6875_CMD_BLK_READ		0x84
+
+/* Each client has this additional data */
+struct max6875_data {
+	struct i2c_client	*fake_client;
+	struct mutex		update_lock;
+
+	u32			valid;
+	u8			data[USER_EEPROM_SIZE];
+	unsigned long		last_updated[USER_EEPROM_SLICES];
+};
+
+static void max6875_update_slice(struct i2c_client *client, int slice)
+{
+	struct max6875_data *data = i2c_get_clientdata(client);
+	int i, j, addr;
+	u8 *buf;
+
+	if (slice >= USER_EEPROM_SLICES)
+		return;
+
+	mutex_lock(&data->update_lock);
+
+	buf = &data->data[slice << SLICE_BITS];
+
+	if (!(data->valid & (1 << slice)) ||
+	    time_after(jiffies, data->last_updated[slice])) {
+
+		dev_dbg(&client->dev, "Starting update of slice %u\n", slice);
+
+		data->valid &= ~(1 << slice);
+
+		addr = USER_EEPROM_BASE + (slice << SLICE_BITS);
+
+		/* select the eeprom address */
+		if (i2c_smbus_write_byte_data(client, addr >> 8, addr & 0xFF)) {
+			dev_err(&client->dev, "address set failed\n");
+			goto exit_up;
+		}
+
+		if (i2c_check_functionality(client->adapter,
+					    I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+			if (i2c_smbus_read_i2c_block_data(client,
+							  MAX6875_CMD_BLK_READ,
+							  SLICE_SIZE,
+							  buf) != SLICE_SIZE) {
+				goto exit_up;
+			}
+		} else {
+			for (i = 0; i < SLICE_SIZE; i++) {
+				j = i2c_smbus_read_byte(client);
+				if (j < 0) {
+					goto exit_up;
+				}
+				buf[i] = j;
+			}
+		}
+		data->last_updated[slice] = jiffies;
+		data->valid |= (1 << slice);
+	}
+exit_up:
+	mutex_unlock(&data->update_lock);
+}
+
+static ssize_t max6875_read(struct file *filp, struct kobject *kobj,
+			    struct bin_attribute *bin_attr,
+			    char *buf, loff_t off, size_t count)
+{
+	struct i2c_client *client = kobj_to_i2c_client(kobj);
+	struct max6875_data *data = i2c_get_clientdata(client);
+	int slice, max_slice;
+
+	/* refresh slices which contain requested bytes */
+	max_slice = (off + count - 1) >> SLICE_BITS;
+	for (slice = (off >> SLICE_BITS); slice <= max_slice; slice++)
+		max6875_update_slice(client, slice);
+
+	memcpy(buf, &data->data[off], count);
+
+	return count;
+}
+
+static const struct bin_attribute user_eeprom_attr = {
+	.attr = {
+		.name = "eeprom",
+		.mode = S_IRUGO,
+	},
+	.size = USER_EEPROM_SIZE,
+	.read = max6875_read,
+};
+
+static int max6875_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct max6875_data *data;
+	int err;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA
+				     | I2C_FUNC_SMBUS_READ_BYTE))
+		return -ENODEV;
+
+	/* Only bind to even addresses */
+	if (client->addr & 1)
+		return -ENODEV;
+
+	data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	/* A fake client is created on the odd address */
+	data->fake_client = i2c_new_dummy(client->adapter, client->addr + 1);
+	if (!data->fake_client) {
+		err = -ENOMEM;
+		goto exit_kfree;
+	}
+
+	/* Init real i2c_client */
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
+
+	err = sysfs_create_bin_file(&client->dev.kobj, &user_eeprom_attr);
+	if (err)
+		goto exit_remove_fake;
+
+	return 0;
+
+exit_remove_fake:
+	i2c_unregister_device(data->fake_client);
+exit_kfree:
+	kfree(data);
+	return err;
+}
+
+static int max6875_remove(struct i2c_client *client)
+{
+	struct max6875_data *data = i2c_get_clientdata(client);
+
+	i2c_unregister_device(data->fake_client);
+
+	sysfs_remove_bin_file(&client->dev.kobj, &user_eeprom_attr);
+	kfree(data);
+
+	return 0;
+}
+
+static const struct i2c_device_id max6875_id[] = {
+	{ "max6875", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max6875_id);
+
+static struct i2c_driver max6875_driver = {
+	.driver = {
+		.name	= "max6875",
+	},
+	.probe		= max6875_probe,
+	.remove		= max6875_remove,
+	.id_table	= max6875_id,
+};
+
+module_i2c_driver(max6875_driver);
+
+MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>");
+MODULE_DESCRIPTION("MAX6875 driver");
+MODULE_LICENSE("GPL");