diff options
| author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 01:02:30 +0000 |
|---|---|---|
| committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 01:02:30 +0000 |
| commit | 76cb841cb886eef6b3bee341a2266c76578724ad (patch) | |
| tree | f5892e5ba6cc11949952a6ce4ecbe6d516d6ce58 /drivers/mtd/nand/raw/qcom_nandc.c | |
| parent | Initial commit. (diff) | |
| download | linux-76cb841cb886eef6b3bee341a2266c76578724ad.tar.xz linux-76cb841cb886eef6b3bee341a2266c76578724ad.zip | |
Adding upstream version 4.19.249.upstream/4.19.249upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/mtd/nand/raw/qcom_nandc.c')
| -rw-r--r-- | drivers/mtd/nand/raw/qcom_nandc.c | 3069 |
1 files changed, 3069 insertions, 0 deletions
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c new file mode 100644 index 000000000..c64b408f0 --- /dev/null +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -0,0 +1,3069 @@ +/* + * Copyright (c) 2016, The Linux Foundation. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/clk.h> +#include <linux/slab.h> +#include <linux/bitops.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/module.h> +#include <linux/mtd/rawnand.h> +#include <linux/mtd/partitions.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/delay.h> +#include <linux/dma/qcom_bam_dma.h> + +/* NANDc reg offsets */ +#define NAND_FLASH_CMD 0x00 +#define NAND_ADDR0 0x04 +#define NAND_ADDR1 0x08 +#define NAND_FLASH_CHIP_SELECT 0x0c +#define NAND_EXEC_CMD 0x10 +#define NAND_FLASH_STATUS 0x14 +#define NAND_BUFFER_STATUS 0x18 +#define NAND_DEV0_CFG0 0x20 +#define NAND_DEV0_CFG1 0x24 +#define NAND_DEV0_ECC_CFG 0x28 +#define NAND_DEV1_ECC_CFG 0x2c +#define NAND_DEV1_CFG0 0x30 +#define NAND_DEV1_CFG1 0x34 +#define NAND_READ_ID 0x40 +#define NAND_READ_STATUS 0x44 +#define NAND_DEV_CMD0 0xa0 +#define NAND_DEV_CMD1 0xa4 +#define NAND_DEV_CMD2 0xa8 +#define NAND_DEV_CMD_VLD 0xac +#define SFLASHC_BURST_CFG 0xe0 +#define NAND_ERASED_CW_DETECT_CFG 0xe8 +#define NAND_ERASED_CW_DETECT_STATUS 0xec +#define NAND_EBI2_ECC_BUF_CFG 0xf0 +#define FLASH_BUF_ACC 0x100 + +#define NAND_CTRL 0xf00 +#define NAND_VERSION 0xf08 +#define NAND_READ_LOCATION_0 0xf20 +#define NAND_READ_LOCATION_1 0xf24 +#define NAND_READ_LOCATION_2 0xf28 +#define NAND_READ_LOCATION_3 0xf2c + +/* dummy register offsets, used by write_reg_dma */ +#define NAND_DEV_CMD1_RESTORE 0xdead +#define NAND_DEV_CMD_VLD_RESTORE 0xbeef + +/* NAND_FLASH_CMD bits */ +#define PAGE_ACC BIT(4) +#define LAST_PAGE BIT(5) + +/* NAND_FLASH_CHIP_SELECT bits */ +#define NAND_DEV_SEL 0 +#define DM_EN BIT(2) + +/* NAND_FLASH_STATUS bits */ +#define FS_OP_ERR BIT(4) +#define FS_READY_BSY_N BIT(5) +#define FS_MPU_ERR BIT(8) +#define FS_DEVICE_STS_ERR BIT(16) +#define FS_DEVICE_WP BIT(23) + +/* NAND_BUFFER_STATUS bits */ +#define BS_UNCORRECTABLE_BIT BIT(8) +#define BS_CORRECTABLE_ERR_MSK 0x1f + +/* NAND_DEVn_CFG0 bits */ +#define DISABLE_STATUS_AFTER_WRITE 4 +#define CW_PER_PAGE 6 +#define UD_SIZE_BYTES 9 +#define ECC_PARITY_SIZE_BYTES_RS 19 +#define SPARE_SIZE_BYTES 23 +#define NUM_ADDR_CYCLES 27 +#define STATUS_BFR_READ 30 +#define SET_RD_MODE_AFTER_STATUS 31 + +/* NAND_DEVn_CFG0 bits */ +#define DEV0_CFG1_ECC_DISABLE 0 +#define WIDE_FLASH 1 +#define NAND_RECOVERY_CYCLES 2 +#define CS_ACTIVE_BSY 5 +#define BAD_BLOCK_BYTE_NUM 6 +#define BAD_BLOCK_IN_SPARE_AREA 16 +#define WR_RD_BSY_GAP 17 +#define ENABLE_BCH_ECC 27 + +/* NAND_DEV0_ECC_CFG bits */ +#define ECC_CFG_ECC_DISABLE 0 +#define ECC_SW_RESET 1 +#define ECC_MODE 4 +#define ECC_PARITY_SIZE_BYTES_BCH 8 +#define ECC_NUM_DATA_BYTES 16 +#define ECC_FORCE_CLK_OPEN 30 + +/* NAND_DEV_CMD1 bits */ +#define READ_ADDR 0 + +/* NAND_DEV_CMD_VLD bits */ +#define READ_START_VLD BIT(0) +#define READ_STOP_VLD BIT(1) +#define WRITE_START_VLD BIT(2) +#define ERASE_START_VLD BIT(3) +#define SEQ_READ_START_VLD BIT(4) + +/* NAND_EBI2_ECC_BUF_CFG bits */ +#define NUM_STEPS 0 + +/* NAND_ERASED_CW_DETECT_CFG bits */ +#define ERASED_CW_ECC_MASK 1 +#define AUTO_DETECT_RES 0 +#define MASK_ECC (1 << ERASED_CW_ECC_MASK) +#define RESET_ERASED_DET (1 << AUTO_DETECT_RES) +#define ACTIVE_ERASED_DET (0 << AUTO_DETECT_RES) +#define CLR_ERASED_PAGE_DET (RESET_ERASED_DET | MASK_ECC) +#define SET_ERASED_PAGE_DET (ACTIVE_ERASED_DET | MASK_ECC) + +/* NAND_ERASED_CW_DETECT_STATUS bits */ +#define PAGE_ALL_ERASED BIT(7) +#define CODEWORD_ALL_ERASED BIT(6) +#define PAGE_ERASED BIT(5) +#define CODEWORD_ERASED BIT(4) +#define ERASED_PAGE (PAGE_ALL_ERASED | PAGE_ERASED) +#define ERASED_CW (CODEWORD_ALL_ERASED | CODEWORD_ERASED) + +/* NAND_READ_LOCATION_n bits */ +#define READ_LOCATION_OFFSET 0 +#define READ_LOCATION_SIZE 16 +#define READ_LOCATION_LAST 31 + +/* Version Mask */ +#define NAND_VERSION_MAJOR_MASK 0xf0000000 +#define NAND_VERSION_MAJOR_SHIFT 28 +#define NAND_VERSION_MINOR_MASK 0x0fff0000 +#define NAND_VERSION_MINOR_SHIFT 16 + +/* NAND OP_CMDs */ +#define OP_PAGE_READ 0x2 +#define OP_PAGE_READ_WITH_ECC 0x3 +#define OP_PAGE_READ_WITH_ECC_SPARE 0x4 +#define OP_PROGRAM_PAGE 0x6 +#define OP_PAGE_PROGRAM_WITH_ECC 0x7 +#define OP_PROGRAM_PAGE_SPARE 0x9 +#define OP_BLOCK_ERASE 0xa +#define OP_FETCH_ID 0xb +#define OP_RESET_DEVICE 0xd + +/* Default Value for NAND_DEV_CMD_VLD */ +#define NAND_DEV_CMD_VLD_VAL (READ_START_VLD | WRITE_START_VLD | \ + ERASE_START_VLD | SEQ_READ_START_VLD) + +/* NAND_CTRL bits */ +#define BAM_MODE_EN BIT(0) + +/* + * the NAND controller performs reads/writes with ECC in 516 byte chunks. + * the driver calls the chunks 'step' or 'codeword' interchangeably + */ +#define NANDC_STEP_SIZE 512 + +/* + * the largest page size we support is 8K, this will have 16 steps/codewords + * of 512 bytes each + */ +#define MAX_NUM_STEPS (SZ_8K / NANDC_STEP_SIZE) + +/* we read at most 3 registers per codeword scan */ +#define MAX_REG_RD (3 * MAX_NUM_STEPS) + +/* ECC modes supported by the controller */ +#define ECC_NONE BIT(0) +#define ECC_RS_4BIT BIT(1) +#define ECC_BCH_4BIT BIT(2) +#define ECC_BCH_8BIT BIT(3) + +#define nandc_set_read_loc(nandc, reg, offset, size, is_last) \ +nandc_set_reg(nandc, NAND_READ_LOCATION_##reg, \ + ((offset) << READ_LOCATION_OFFSET) | \ + ((size) << READ_LOCATION_SIZE) | \ + ((is_last) << READ_LOCATION_LAST)) + +/* + * Returns the actual register address for all NAND_DEV_ registers + * (i.e. NAND_DEV_CMD0, NAND_DEV_CMD1, NAND_DEV_CMD2 and NAND_DEV_CMD_VLD) + */ +#define dev_cmd_reg_addr(nandc, reg) ((nandc)->props->dev_cmd_reg_start + (reg)) + +/* Returns the NAND register physical address */ +#define nandc_reg_phys(chip, offset) ((chip)->base_phys + (offset)) + +/* Returns the dma address for reg read buffer */ +#define reg_buf_dma_addr(chip, vaddr) \ + ((chip)->reg_read_dma + \ + ((uint8_t *)(vaddr) - (uint8_t *)(chip)->reg_read_buf)) + +#define QPIC_PER_CW_CMD_ELEMENTS 32 +#define QPIC_PER_CW_CMD_SGL 32 +#define QPIC_PER_CW_DATA_SGL 8 + +#define QPIC_NAND_COMPLETION_TIMEOUT msecs_to_jiffies(2000) + +/* + * Flags used in DMA descriptor preparation helper functions + * (i.e. read_reg_dma/write_reg_dma/read_data_dma/write_data_dma) + */ +/* Don't set the EOT in current tx BAM sgl */ +#define NAND_BAM_NO_EOT BIT(0) +/* Set the NWD flag in current BAM sgl */ +#define NAND_BAM_NWD BIT(1) +/* Finish writing in the current BAM sgl and start writing in another BAM sgl */ +#define NAND_BAM_NEXT_SGL BIT(2) +/* + * Erased codeword status is being used two times in single transfer so this + * flag will determine the current value of erased codeword status register + */ +#define NAND_ERASED_CW_SET BIT(4) + +/* + * This data type corresponds to the BAM transaction which will be used for all + * NAND transfers. + * @bam_ce - the array of BAM command elements + * @cmd_sgl - sgl for NAND BAM command pipe + * @data_sgl - sgl for NAND BAM consumer/producer pipe + * @bam_ce_pos - the index in bam_ce which is available for next sgl + * @bam_ce_start - the index in bam_ce which marks the start position ce + * for current sgl. It will be used for size calculation + * for current sgl + * @cmd_sgl_pos - current index in command sgl. + * @cmd_sgl_start - start index in command sgl. + * @tx_sgl_pos - current index in data sgl for tx. + * @tx_sgl_start - start index in data sgl for tx. + * @rx_sgl_pos - current index in data sgl for rx. + * @rx_sgl_start - start index in data sgl for rx. + * @wait_second_completion - wait for second DMA desc completion before making + * the NAND transfer completion. + * @txn_done - completion for NAND transfer. + * @last_data_desc - last DMA desc in data channel (tx/rx). + * @last_cmd_desc - last DMA desc in command channel. + */ +struct bam_transaction { + struct bam_cmd_element *bam_ce; + struct scatterlist *cmd_sgl; + struct scatterlist *data_sgl; + u32 bam_ce_pos; + u32 bam_ce_start; + u32 cmd_sgl_pos; + u32 cmd_sgl_start; + u32 tx_sgl_pos; + u32 tx_sgl_start; + u32 rx_sgl_pos; + u32 rx_sgl_start; + bool wait_second_completion; + struct completion txn_done; + struct dma_async_tx_descriptor *last_data_desc; + struct dma_async_tx_descriptor *last_cmd_desc; +}; + +/* + * This data type corresponds to the nand dma descriptor + * @list - list for desc_info + * @dir - DMA transfer direction + * @adm_sgl - sgl which will be used for single sgl dma descriptor. Only used by + * ADM + * @bam_sgl - sgl which will be used for dma descriptor. Only used by BAM + * @sgl_cnt - number of SGL in bam_sgl. Only used by BAM + * @dma_desc - low level DMA engine descriptor + */ +struct desc_info { + struct list_head node; + + enum dma_data_direction dir; + union { + struct scatterlist adm_sgl; + struct { + struct scatterlist *bam_sgl; + int sgl_cnt; + }; + }; + struct dma_async_tx_descriptor *dma_desc; +}; + +/* + * holds the current register values that we want to write. acts as a contiguous + * chunk of memory which we use to write the controller registers through DMA. + */ +struct nandc_regs { + __le32 cmd; + __le32 addr0; + __le32 addr1; + __le32 chip_sel; + __le32 exec; + + __le32 cfg0; + __le32 cfg1; + __le32 ecc_bch_cfg; + + __le32 clrflashstatus; + __le32 clrreadstatus; + + __le32 cmd1; + __le32 vld; + + __le32 orig_cmd1; + __le32 orig_vld; + + __le32 ecc_buf_cfg; + __le32 read_location0; + __le32 read_location1; + __le32 read_location2; + __le32 read_location3; + + __le32 erased_cw_detect_cfg_clr; + __le32 erased_cw_detect_cfg_set; +}; + +/* + * NAND controller data struct + * + * @controller: base controller structure + * @host_list: list containing all the chips attached to the + * controller + * @dev: parent device + * @base: MMIO base + * @base_phys: physical base address of controller registers + * @base_dma: dma base address of controller registers + * @core_clk: controller clock + * @aon_clk: another controller clock + * + * @chan: dma channel + * @cmd_crci: ADM DMA CRCI for command flow control + * @data_crci: ADM DMA CRCI for data flow control + * @desc_list: DMA descriptor list (list of desc_infos) + * + * @data_buffer: our local DMA buffer for page read/writes, + * used when we can't use the buffer provided + * by upper layers directly + * @buf_size/count/start: markers for chip->read_buf/write_buf functions + * @reg_read_buf: local buffer for reading back registers via DMA + * @reg_read_dma: contains dma address for register read buffer + * @reg_read_pos: marker for data read in reg_read_buf + * + * @regs: a contiguous chunk of memory for DMA register + * writes. contains the register values to be + * written to controller + * @cmd1/vld: some fixed controller register values + * @props: properties of current NAND controller, + * initialized via DT match data + * @max_cwperpage: maximum QPIC codewords required. calculated + * from all connected NAND devices pagesize + */ +struct qcom_nand_controller { + struct nand_controller controller; + struct list_head host_list; + + struct device *dev; + + void __iomem *base; + phys_addr_t base_phys; + dma_addr_t base_dma; + + struct clk *core_clk; + struct clk *aon_clk; + + union { + /* will be used only by QPIC for BAM DMA */ + struct { + struct dma_chan *tx_chan; + struct dma_chan *rx_chan; + struct dma_chan *cmd_chan; + }; + + /* will be used only by EBI2 for ADM DMA */ + struct { + struct dma_chan *chan; + unsigned int cmd_crci; + unsigned int data_crci; + }; + }; + + struct list_head desc_list; + struct bam_transaction *bam_txn; + + u8 *data_buffer; + int buf_size; + int buf_count; + int buf_start; + unsigned int max_cwperpage; + + __le32 *reg_read_buf; + dma_addr_t reg_read_dma; + int reg_read_pos; + + struct nandc_regs *regs; + + u32 cmd1, vld; + const struct qcom_nandc_props *props; +}; + +/* + * NAND chip structure + * + * @chip: base NAND chip structure + * @node: list node to add itself to host_list in + * qcom_nand_controller + * + * @cs: chip select value for this chip + * @cw_size: the number of bytes in a single step/codeword + * of a page, consisting of all data, ecc, spare + * and reserved bytes + * @cw_data: the number of bytes within a codeword protected + * by ECC + * @use_ecc: request the controller to use ECC for the + * upcoming read/write + * @bch_enabled: flag to tell whether BCH ECC mode is used + * @ecc_bytes_hw: ECC bytes used by controller hardware for this + * chip + * @status: value to be returned if NAND_CMD_STATUS command + * is executed + * @last_command: keeps track of last command on this chip. used + * for reading correct status + * + * @cfg0, cfg1, cfg0_raw..: NANDc register configurations needed for + * ecc/non-ecc mode for the current nand flash + * device + */ +struct qcom_nand_host { + struct nand_chip chip; + struct list_head node; + + int cs; + int cw_size; + int cw_data; + bool use_ecc; + bool bch_enabled; + int ecc_bytes_hw; + int spare_bytes; + int bbm_size; + u8 status; + int last_command; + + u32 cfg0, cfg1; + u32 cfg0_raw, cfg1_raw; + u32 ecc_buf_cfg; + u32 ecc_bch_cfg; + u32 clrflashstatus; + u32 clrreadstatus; +}; + +/* + * This data type corresponds to the NAND controller properties which varies + * among different NAND controllers. + * @ecc_modes - ecc mode for NAND + * @is_bam - whether NAND controller is using BAM + * @is_qpic - whether NAND CTRL is part of qpic IP + * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset + */ +struct qcom_nandc_props { + u32 ecc_modes; + bool is_bam; + bool is_qpic; + u32 dev_cmd_reg_start; +}; + +/* Frees the BAM transaction memory */ +static void free_bam_transaction(struct qcom_nand_controller *nandc) +{ + struct bam_transaction *bam_txn = nandc->bam_txn; + + devm_kfree(nandc->dev, bam_txn); +} + +/* Allocates and Initializes the BAM transaction */ +static struct bam_transaction * +alloc_bam_transaction(struct qcom_nand_controller *nandc) +{ + struct bam_transaction *bam_txn; + size_t bam_txn_size; + unsigned int num_cw = nandc->max_cwperpage; + void *bam_txn_buf; + + bam_txn_size = + sizeof(*bam_txn) + num_cw * + ((sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS) + + (sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL) + + (sizeof(*bam_txn->data_sgl) * QPIC_PER_CW_DATA_SGL)); + + bam_txn_buf = devm_kzalloc(nandc->dev, bam_txn_size, GFP_KERNEL); + if (!bam_txn_buf) + return NULL; + + bam_txn = bam_txn_buf; + bam_txn_buf += sizeof(*bam_txn); + + bam_txn->bam_ce = bam_txn_buf; + bam_txn_buf += + sizeof(*bam_txn->bam_ce) * QPIC_PER_CW_CMD_ELEMENTS * num_cw; + + bam_txn->cmd_sgl = bam_txn_buf; + bam_txn_buf += + sizeof(*bam_txn->cmd_sgl) * QPIC_PER_CW_CMD_SGL * num_cw; + + bam_txn->data_sgl = bam_txn_buf; + + init_completion(&bam_txn->txn_done); + + return bam_txn; +} + +/* Clears the BAM transaction indexes */ +static void clear_bam_transaction(struct qcom_nand_controller *nandc) +{ + struct bam_transaction *bam_txn = nandc->bam_txn; + + if (!nandc->props->is_bam) + return; + + bam_txn->bam_ce_pos = 0; + bam_txn->bam_ce_start = 0; + bam_txn->cmd_sgl_pos = 0; + bam_txn->cmd_sgl_start = 0; + bam_txn->tx_sgl_pos = 0; + bam_txn->tx_sgl_start = 0; + bam_txn->rx_sgl_pos = 0; + bam_txn->rx_sgl_start = 0; + bam_txn->last_data_desc = NULL; + bam_txn->wait_second_completion = false; + + sg_init_table(bam_txn->cmd_sgl, nandc->max_cwperpage * + QPIC_PER_CW_CMD_SGL); + sg_init_table(bam_txn->data_sgl, nandc->max_cwperpage * + QPIC_PER_CW_DATA_SGL); + + reinit_completion(&bam_txn->txn_done); +} + +/* Callback for DMA descriptor completion */ +static void qpic_bam_dma_done(void *data) +{ + struct bam_transaction *bam_txn = data; + + /* + * In case of data transfer with NAND, 2 callbacks will be generated. + * One for command channel and another one for data channel. + * If current transaction has data descriptors + * (i.e. wait_second_completion is true), then set this to false + * and wait for second DMA descriptor completion. + */ + if (bam_txn->wait_second_completion) + bam_txn->wait_second_completion = false; + else + complete(&bam_txn->txn_done); +} + +static inline struct qcom_nand_host *to_qcom_nand_host(struct nand_chip *chip) +{ + return container_of(chip, struct qcom_nand_host, chip); +} + +static inline struct qcom_nand_controller * +get_qcom_nand_controller(struct nand_chip *chip) +{ + return container_of(chip->controller, struct qcom_nand_controller, + controller); +} + +static inline u32 nandc_read(struct qcom_nand_controller *nandc, int offset) +{ + return ioread32(nandc->base + offset); +} + +static inline void nandc_write(struct qcom_nand_controller *nandc, int offset, + u32 val) +{ + iowrite32(val, nandc->base + offset); +} + +static inline void nandc_read_buffer_sync(struct qcom_nand_controller *nandc, + bool is_cpu) +{ + if (!nandc->props->is_bam) + return; + + if (is_cpu) + dma_sync_single_for_cpu(nandc->dev, nandc->reg_read_dma, + MAX_REG_RD * + sizeof(*nandc->reg_read_buf), + DMA_FROM_DEVICE); + else + dma_sync_single_for_device(nandc->dev, nandc->reg_read_dma, + MAX_REG_RD * + sizeof(*nandc->reg_read_buf), + DMA_FROM_DEVICE); +} + +static __le32 *offset_to_nandc_reg(struct nandc_regs *regs, int offset) +{ + switch (offset) { + case NAND_FLASH_CMD: + return ®s->cmd; + case NAND_ADDR0: + return ®s->addr0; + case NAND_ADDR1: + return ®s->addr1; + case NAND_FLASH_CHIP_SELECT: + return ®s->chip_sel; + case NAND_EXEC_CMD: + return ®s->exec; + case NAND_FLASH_STATUS: + return ®s->clrflashstatus; + case NAND_DEV0_CFG0: + return ®s->cfg0; + case NAND_DEV0_CFG1: + return ®s->cfg1; + case NAND_DEV0_ECC_CFG: + return ®s->ecc_bch_cfg; + case NAND_READ_STATUS: + return ®s->clrreadstatus; + case NAND_DEV_CMD1: + return ®s->cmd1; + case NAND_DEV_CMD1_RESTORE: + return ®s->orig_cmd1; + case NAND_DEV_CMD_VLD: + return ®s->vld; + case NAND_DEV_CMD_VLD_RESTORE: + return ®s->orig_vld; + case NAND_EBI2_ECC_BUF_CFG: + return ®s->ecc_buf_cfg; + case NAND_READ_LOCATION_0: + return ®s->read_location0; + case NAND_READ_LOCATION_1: + return ®s->read_location1; + case NAND_READ_LOCATION_2: + return ®s->read_location2; + case NAND_READ_LOCATION_3: + return ®s->read_location3; + default: + return NULL; + } +} + +static void nandc_set_reg(struct qcom_nand_controller *nandc, int offset, + u32 val) +{ + struct nandc_regs *regs = nandc->regs; + __le32 *reg; + + reg = offset_to_nandc_reg(regs, offset); + + if (reg) + *reg = cpu_to_le32(val); +} + +/* helper to configure address register values */ +static void set_address(struct qcom_nand_host *host, u16 column, int page) +{ + struct nand_chip *chip = &host->chip; + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + + if (chip->options & NAND_BUSWIDTH_16) + column >>= 1; + + nandc_set_reg(nandc, NAND_ADDR0, page << 16 | column); + nandc_set_reg(nandc, NAND_ADDR1, page >> 16 & 0xff); +} + +/* + * update_rw_regs: set up read/write register values, these will be + * written to the NAND controller registers via DMA + * + * @num_cw: number of steps for the read/write operation + * @read: read or write operation + */ +static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read) +{ + struct nand_chip *chip = &host->chip; + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + u32 cmd, cfg0, cfg1, ecc_bch_cfg; + + if (read) { + if (host->use_ecc) + cmd = OP_PAGE_READ_WITH_ECC | PAGE_ACC | LAST_PAGE; + else + cmd = OP_PAGE_READ | PAGE_ACC | LAST_PAGE; + } else { + cmd = OP_PROGRAM_PAGE | PAGE_ACC | LAST_PAGE; + } + + if (host->use_ecc) { + cfg0 = (host->cfg0 & ~(7U << CW_PER_PAGE)) | + (num_cw - 1) << CW_PER_PAGE; + + cfg1 = host->cfg1; + ecc_bch_cfg = host->ecc_bch_cfg; + } else { + cfg0 = (host->cfg0_raw & ~(7U << CW_PER_PAGE)) | + (num_cw - 1) << CW_PER_PAGE; + + cfg1 = host->cfg1_raw; + ecc_bch_cfg = 1 << ECC_CFG_ECC_DISABLE; + } + + nandc_set_reg(nandc, NAND_FLASH_CMD, cmd); + nandc_set_reg(nandc, NAND_DEV0_CFG0, cfg0); + nandc_set_reg(nandc, NAND_DEV0_CFG1, cfg1); + nandc_set_reg(nandc, NAND_DEV0_ECC_CFG, ecc_bch_cfg); + nandc_set_reg(nandc, NAND_EBI2_ECC_BUF_CFG, host->ecc_buf_cfg); + nandc_set_reg(nandc, NAND_FLASH_STATUS, host->clrflashstatus); + nandc_set_reg(nandc, NAND_READ_STATUS, host->clrreadstatus); + nandc_set_reg(nandc, NAND_EXEC_CMD, 1); + + if (read) + nandc_set_read_loc(nandc, 0, 0, host->use_ecc ? + host->cw_data : host->cw_size, 1); +} + +/* + * Maps the scatter gather list for DMA transfer and forms the DMA descriptor + * for BAM. This descriptor will be added in the NAND DMA descriptor queue + * which will be submitted to DMA engine. + */ +static int prepare_bam_async_desc(struct qcom_nand_controller *nandc, + struct dma_chan *chan, + unsigned long flags) +{ + struct desc_info *desc; + struct scatterlist *sgl; + unsigned int sgl_cnt; + int ret; + struct bam_transaction *bam_txn = nandc->bam_txn; + enum dma_transfer_direction dir_eng; + struct dma_async_tx_descriptor *dma_desc; + + desc = kzalloc(sizeof(*desc), GFP_KERNEL); + if (!desc) + return -ENOMEM; + + if (chan == nandc->cmd_chan) { + sgl = &bam_txn->cmd_sgl[bam_txn->cmd_sgl_start]; + sgl_cnt = bam_txn->cmd_sgl_pos - bam_txn->cmd_sgl_start; + bam_txn->cmd_sgl_start = bam_txn->cmd_sgl_pos; + dir_eng = DMA_MEM_TO_DEV; + desc->dir = DMA_TO_DEVICE; + } else if (chan == nandc->tx_chan) { + sgl = &bam_txn->data_sgl[bam_txn->tx_sgl_start]; + sgl_cnt = bam_txn->tx_sgl_pos - bam_txn->tx_sgl_start; + bam_txn->tx_sgl_start = bam_txn->tx_sgl_pos; + dir_eng = DMA_MEM_TO_DEV; + desc->dir = DMA_TO_DEVICE; + } else { + sgl = &bam_txn->data_sgl[bam_txn->rx_sgl_start]; + sgl_cnt = bam_txn->rx_sgl_pos - bam_txn->rx_sgl_start; + bam_txn->rx_sgl_start = bam_txn->rx_sgl_pos; + dir_eng = DMA_DEV_TO_MEM; + desc->dir = DMA_FROM_DEVICE; + } + + sg_mark_end(sgl + sgl_cnt - 1); + ret = dma_map_sg(nandc->dev, sgl, sgl_cnt, desc->dir); + if (ret == 0) { + dev_err(nandc->dev, "failure in mapping desc\n"); + kfree(desc); + return -ENOMEM; + } + + desc->sgl_cnt = sgl_cnt; + desc->bam_sgl = sgl; + + dma_desc = dmaengine_prep_slave_sg(chan, sgl, sgl_cnt, dir_eng, + flags); + + if (!dma_desc) { + dev_err(nandc->dev, "failure in prep desc\n"); + dma_unmap_sg(nandc->dev, sgl, sgl_cnt, desc->dir); + kfree(desc); + return -EINVAL; + } + + desc->dma_desc = dma_desc; + + /* update last data/command descriptor */ + if (chan == nandc->cmd_chan) + bam_txn->last_cmd_desc = dma_desc; + else + bam_txn->last_data_desc = dma_desc; + + list_add_tail(&desc->node, &nandc->desc_list); + + return 0; +} + +/* + * Prepares the command descriptor for BAM DMA which will be used for NAND + * register reads and writes. The command descriptor requires the command + * to be formed in command element type so this function uses the command + * element from bam transaction ce array and fills the same with required + * data. A single SGL can contain multiple command elements so + * NAND_BAM_NEXT_SGL will be used for starting the separate SGL + * after the current command element. + */ +static int prep_bam_dma_desc_cmd(struct qcom_nand_controller *nandc, bool read, + int reg_off, const void *vaddr, + int size, unsigned int flags) +{ + int bam_ce_size; + int i, ret; + struct bam_cmd_element *bam_ce_buffer; + struct bam_transaction *bam_txn = nandc->bam_txn; + + bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_pos]; + + /* fill the command desc */ + for (i = 0; i < size; i++) { + if (read) + bam_prep_ce(&bam_ce_buffer[i], + nandc_reg_phys(nandc, reg_off + 4 * i), + BAM_READ_COMMAND, + reg_buf_dma_addr(nandc, + (__le32 *)vaddr + i)); + else + bam_prep_ce_le32(&bam_ce_buffer[i], + nandc_reg_phys(nandc, reg_off + 4 * i), + BAM_WRITE_COMMAND, + *((__le32 *)vaddr + i)); + } + + bam_txn->bam_ce_pos += size; + + /* use the separate sgl after this command */ + if (flags & NAND_BAM_NEXT_SGL) { + bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_start]; + bam_ce_size = (bam_txn->bam_ce_pos - + bam_txn->bam_ce_start) * + sizeof(struct bam_cmd_element); + sg_set_buf(&bam_txn->cmd_sgl[bam_txn->cmd_sgl_pos], + bam_ce_buffer, bam_ce_size); + bam_txn->cmd_sgl_pos++; + bam_txn->bam_ce_start = bam_txn->bam_ce_pos; + + if (flags & NAND_BAM_NWD) { + ret = prepare_bam_async_desc(nandc, nandc->cmd_chan, + DMA_PREP_FENCE | + DMA_PREP_CMD); + if (ret) + return ret; + } + } + + return 0; +} + +/* + * Prepares the data descriptor for BAM DMA which will be used for NAND + * data reads and writes. + */ +static int prep_bam_dma_desc_data(struct qcom_nand_controller *nandc, bool read, + const void *vaddr, + int size, unsigned int flags) +{ + int ret; + struct bam_transaction *bam_txn = nandc->bam_txn; + + if (read) { + sg_set_buf(&bam_txn->data_sgl[bam_txn->rx_sgl_pos], + vaddr, size); + bam_txn->rx_sgl_pos++; + } else { + sg_set_buf(&bam_txn->data_sgl[bam_txn->tx_sgl_pos], + vaddr, size); + bam_txn->tx_sgl_pos++; + + /* + * BAM will only set EOT for DMA_PREP_INTERRUPT so if this flag + * is not set, form the DMA descriptor + */ + if (!(flags & NAND_BAM_NO_EOT)) { + ret = prepare_bam_async_desc(nandc, nandc->tx_chan, + DMA_PREP_INTERRUPT); + if (ret) + return ret; + } + } + + return 0; +} + +static int prep_adm_dma_desc(struct qcom_nand_controller *nandc, bool read, + int reg_off, const void *vaddr, int size, + bool flow_control) +{ + struct desc_info *desc; + struct dma_async_tx_descriptor *dma_desc; + struct scatterlist *sgl; + struct dma_slave_config slave_conf; + enum dma_transfer_direction dir_eng; + int ret; + + desc = kzalloc(sizeof(*desc), GFP_KERNEL); + if (!desc) + return -ENOMEM; + + sgl = &desc->adm_sgl; + + sg_init_one(sgl, vaddr, size); + + if (read) { + dir_eng = DMA_DEV_TO_MEM; + desc->dir = DMA_FROM_DEVICE; + } else { + dir_eng = DMA_MEM_TO_DEV; + desc->dir = DMA_TO_DEVICE; + } + + ret = dma_map_sg(nandc->dev, sgl, 1, desc->dir); + if (ret == 0) { + ret = -ENOMEM; + goto err; + } + + memset(&slave_conf, 0x00, sizeof(slave_conf)); + + slave_conf.device_fc = flow_control; + if (read) { + slave_conf.src_maxburst = 16; + slave_conf.src_addr = nandc->base_dma + reg_off; + slave_conf.slave_id = nandc->data_crci; + } else { + slave_conf.dst_maxburst = 16; + slave_conf.dst_addr = nandc->base_dma + reg_off; + slave_conf.slave_id = nandc->cmd_crci; + } + + ret = dmaengine_slave_config(nandc->chan, &slave_conf); + if (ret) { + dev_err(nandc->dev, "failed to configure dma channel\n"); + goto err; + } + + dma_desc = dmaengine_prep_slave_sg(nandc->chan, sgl, 1, dir_eng, 0); + if (!dma_desc) { + dev_err(nandc->dev, "failed to prepare desc\n"); + ret = -EINVAL; + goto err; + } + + desc->dma_desc = dma_desc; + + list_add_tail(&desc->node, &nandc->desc_list); + + return 0; +err: + kfree(desc); + + return ret; +} + +/* + * read_reg_dma: prepares a descriptor to read a given number of + * contiguous registers to the reg_read_buf pointer + * + * @first: offset of the first register in the contiguous block + * @num_regs: number of registers to read + * @flags: flags to control DMA descriptor preparation + */ +static int read_reg_dma(struct qcom_nand_controller *nandc, int first, + int num_regs, unsigned int flags) +{ + bool flow_control = false; + void *vaddr; + + vaddr = nandc->reg_read_buf + nandc->reg_read_pos; + nandc->reg_read_pos += num_regs; + + if (first == NAND_DEV_CMD_VLD || first == NAND_DEV_CMD1) + first = dev_cmd_reg_addr(nandc, first); + + if (nandc->props->is_bam) + return prep_bam_dma_desc_cmd(nandc, true, first, vaddr, + num_regs, flags); + + if (first == NAND_READ_ID || first == NAND_FLASH_STATUS) + flow_control = true; + + return prep_adm_dma_desc(nandc, true, first, vaddr, + num_regs * sizeof(u32), flow_control); +} + +/* + * write_reg_dma: prepares a descriptor to write a given number of + * contiguous registers + * + * @first: offset of the first register in the contiguous block + * @num_regs: number of registers to write + * @flags: flags to control DMA descriptor preparation + */ +static int write_reg_dma(struct qcom_nand_controller *nandc, int first, + int num_regs, unsigned int flags) +{ + bool flow_control = false; + struct nandc_regs *regs = nandc->regs; + void *vaddr; + + vaddr = offset_to_nandc_reg(regs, first); + + if (first == NAND_ERASED_CW_DETECT_CFG) { + if (flags & NAND_ERASED_CW_SET) + vaddr = ®s->erased_cw_detect_cfg_set; + else + vaddr = ®s->erased_cw_detect_cfg_clr; + } + + if (first == NAND_EXEC_CMD) + flags |= NAND_BAM_NWD; + + if (first == NAND_DEV_CMD1_RESTORE || first == NAND_DEV_CMD1) + first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD1); + + if (first == NAND_DEV_CMD_VLD_RESTORE || first == NAND_DEV_CMD_VLD) + first = dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD); + + if (nandc->props->is_bam) + return prep_bam_dma_desc_cmd(nandc, false, first, vaddr, + num_regs, flags); + + if (first == NAND_FLASH_CMD) + flow_control = true; + + return prep_adm_dma_desc(nandc, false, first, vaddr, + num_regs * sizeof(u32), flow_control); +} + +/* + * read_data_dma: prepares a DMA descriptor to transfer data from the + * controller's internal buffer to the buffer 'vaddr' + * + * @reg_off: offset within the controller's data buffer + * @vaddr: virtual address of the buffer we want to write to + * @size: DMA transaction size in bytes + * @flags: flags to control DMA descriptor preparation + */ +static int read_data_dma(struct qcom_nand_controller *nandc, int reg_off, + const u8 *vaddr, int size, unsigned int flags) +{ + if (nandc->props->is_bam) + return prep_bam_dma_desc_data(nandc, true, vaddr, size, flags); + + return prep_adm_dma_desc(nandc, true, reg_off, vaddr, size, false); +} + +/* + * write_data_dma: prepares a DMA descriptor to transfer data from + * 'vaddr' to the controller's internal buffer + * + * @reg_off: offset within the controller's data buffer + * @vaddr: virtual address of the buffer we want to read from + * @size: DMA transaction size in bytes + * @flags: flags to control DMA descriptor preparation + */ +static int write_data_dma(struct qcom_nand_controller *nandc, int reg_off, + const u8 *vaddr, int size, unsigned int flags) +{ + if (nandc->props->is_bam) + return prep_bam_dma_desc_data(nandc, false, vaddr, size, flags); + + return prep_adm_dma_desc(nandc, false, reg_off, vaddr, size, false); +} + +/* + * Helper to prepare DMA descriptors for configuring registers + * before reading a NAND page. + */ +static void config_nand_page_read(struct qcom_nand_controller *nandc) +{ + write_reg_dma(nandc, NAND_ADDR0, 2, 0); + write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0); + write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0); + write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, 0); + write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, + NAND_ERASED_CW_SET | NAND_BAM_NEXT_SGL); +} + +/* + * Helper to prepare DMA descriptors for configuring registers + * before reading each codeword in NAND page. + */ +static void +config_nand_cw_read(struct qcom_nand_controller *nandc, bool use_ecc) +{ + if (nandc->props->is_bam) + write_reg_dma(nandc, NAND_READ_LOCATION_0, 4, + NAND_BAM_NEXT_SGL); + + write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL); + write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL); + + if (use_ecc) { + read_reg_dma(nandc, NAND_FLASH_STATUS, 2, 0); + read_reg_dma(nandc, NAND_ERASED_CW_DETECT_STATUS, 1, + NAND_BAM_NEXT_SGL); + } else { + read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL); + } +} + +/* + * Helper to prepare dma descriptors to configure registers needed for reading a + * single codeword in page + */ +static void +config_nand_single_cw_page_read(struct qcom_nand_controller *nandc, + bool use_ecc) +{ + config_nand_page_read(nandc); + config_nand_cw_read(nandc, use_ecc); +} + +/* + * Helper to prepare DMA descriptors used to configure registers needed for + * before writing a NAND page. + */ +static void config_nand_page_write(struct qcom_nand_controller *nandc) +{ + write_reg_dma(nandc, NAND_ADDR0, 2, 0); + write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0); + write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, + NAND_BAM_NEXT_SGL); +} + +/* + * Helper to prepare DMA descriptors for configuring registers + * before writing each codeword in NAND page. + */ +static void config_nand_cw_write(struct qcom_nand_controller *nandc) +{ + write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL); + write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL); + + read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL); + + write_reg_dma(nandc, NAND_FLASH_STATUS, 1, 0); + write_reg_dma(nandc, NAND_READ_STATUS, 1, NAND_BAM_NEXT_SGL); +} + +/* + * the following functions are used within chip->cmdfunc() to perform different + * NAND_CMD_* commands + */ + +/* sets up descriptors for NAND_CMD_PARAM */ +static int nandc_param(struct qcom_nand_host *host) +{ + struct nand_chip *chip = &host->chip; + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + + /* + * NAND_CMD_PARAM is called before we know much about the FLASH chip + * in use. we configure the controller to perform a raw read of 512 + * bytes to read onfi params + */ + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_PAGE_READ | PAGE_ACC | LAST_PAGE); + nandc_set_reg(nandc, NAND_ADDR0, 0); + nandc_set_reg(nandc, NAND_ADDR1, 0); + nandc_set_reg(nandc, NAND_DEV0_CFG0, 0 << CW_PER_PAGE + | 512 << UD_SIZE_BYTES + | 5 << NUM_ADDR_CYCLES + | 0 << SPARE_SIZE_BYTES); + nandc_set_reg(nandc, NAND_DEV0_CFG1, 7 << NAND_RECOVERY_CYCLES + | 0 << CS_ACTIVE_BSY + | 17 << BAD_BLOCK_BYTE_NUM + | 1 << BAD_BLOCK_IN_SPARE_AREA + | 2 << WR_RD_BSY_GAP + | 0 << WIDE_FLASH + | 1 << DEV0_CFG1_ECC_DISABLE); + nandc_set_reg(nandc, NAND_EBI2_ECC_BUF_CFG, 1 << ECC_CFG_ECC_DISABLE); + + /* configure CMD1 and VLD for ONFI param probing */ + nandc_set_reg(nandc, NAND_DEV_CMD_VLD, + (nandc->vld & ~READ_START_VLD)); + nandc_set_reg(nandc, NAND_DEV_CMD1, + (nandc->cmd1 & ~(0xFF << READ_ADDR)) + | NAND_CMD_PARAM << READ_ADDR); + + nandc_set_reg(nandc, NAND_EXEC_CMD, 1); + + nandc_set_reg(nandc, NAND_DEV_CMD1_RESTORE, nandc->cmd1); + nandc_set_reg(nandc, NAND_DEV_CMD_VLD_RESTORE, nandc->vld); + nandc_set_read_loc(nandc, 0, 0, 512, 1); + + write_reg_dma(nandc, NAND_DEV_CMD_VLD, 1, 0); + write_reg_dma(nandc, NAND_DEV_CMD1, 1, NAND_BAM_NEXT_SGL); + + nandc->buf_count = 512; + memset(nandc->data_buffer, 0xff, nandc->buf_count); + + config_nand_single_cw_page_read(nandc, false); + + read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, + nandc->buf_count, 0); + + /* restore CMD1 and VLD regs */ + write_reg_dma(nandc, NAND_DEV_CMD1_RESTORE, 1, 0); + write_reg_dma(nandc, NAND_DEV_CMD_VLD_RESTORE, 1, NAND_BAM_NEXT_SGL); + + return 0; +} + +/* sets up descriptors for NAND_CMD_ERASE1 */ +static int erase_block(struct qcom_nand_host *host, int page_addr) +{ + struct nand_chip *chip = &host->chip; + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + + nandc_set_reg(nandc, NAND_FLASH_CMD, + OP_BLOCK_ERASE | PAGE_ACC | LAST_PAGE); + nandc_set_reg(nandc, NAND_ADDR0, page_addr); + nandc_set_reg(nandc, NAND_ADDR1, 0); + nandc_set_reg(nandc, NAND_DEV0_CFG0, + host->cfg0_raw & ~(7 << CW_PER_PAGE)); + nandc_set_reg(nandc, NAND_DEV0_CFG1, host->cfg1_raw); + nandc_set_reg(nandc, NAND_EXEC_CMD, 1); + nandc_set_reg(nandc, NAND_FLASH_STATUS, host->clrflashstatus); + nandc_set_reg(nandc, NAND_READ_STATUS, host->clrreadstatus); + + write_reg_dma(nandc, NAND_FLASH_CMD, 3, NAND_BAM_NEXT_SGL); + write_reg_dma(nandc, NAND_DEV0_CFG0, 2, NAND_BAM_NEXT_SGL); + write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL); + + read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL); + + write_reg_dma(nandc, NAND_FLASH_STATUS, 1, 0); + write_reg_dma(nandc, NAND_READ_STATUS, 1, NAND_BAM_NEXT_SGL); + + return 0; +} + +/* sets up descriptors for NAND_CMD_READID */ +static int read_id(struct qcom_nand_host *host, int column) +{ + struct nand_chip *chip = &host->chip; + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + + if (column == -1) + return 0; + + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_FETCH_ID); + nandc_set_reg(nandc, NAND_ADDR0, column); + nandc_set_reg(nandc, NAND_ADDR1, 0); + nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT, + nandc->props->is_bam ? 0 : DM_EN); + nandc_set_reg(nandc, NAND_EXEC_CMD, 1); + + write_reg_dma(nandc, NAND_FLASH_CMD, 4, NAND_BAM_NEXT_SGL); + write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL); + + read_reg_dma(nandc, NAND_READ_ID, 1, NAND_BAM_NEXT_SGL); + + return 0; +} + +/* sets up descriptors for NAND_CMD_RESET */ +static int reset(struct qcom_nand_host *host) +{ + struct nand_chip *chip = &host->chip; + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_RESET_DEVICE); + nandc_set_reg(nandc, NAND_EXEC_CMD, 1); + + write_reg_dma(nandc, NAND_FLASH_CMD, 1, NAND_BAM_NEXT_SGL); + write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL); + + read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL); + + return 0; +} + +/* helpers to submit/free our list of dma descriptors */ +static int submit_descs(struct qcom_nand_controller *nandc) +{ + struct desc_info *desc; + dma_cookie_t cookie = 0; + struct bam_transaction *bam_txn = nandc->bam_txn; + int r; + + if (nandc->props->is_bam) { + if (bam_txn->rx_sgl_pos > bam_txn->rx_sgl_start) { + r = prepare_bam_async_desc(nandc, nandc->rx_chan, 0); + if (r) + return r; + } + + if (bam_txn->tx_sgl_pos > bam_txn->tx_sgl_start) { + r = prepare_bam_async_desc(nandc, nandc->tx_chan, + DMA_PREP_INTERRUPT); + if (r) + return r; + } + + if (bam_txn->cmd_sgl_pos > bam_txn->cmd_sgl_start) { + r = prepare_bam_async_desc(nandc, nandc->cmd_chan, + DMA_PREP_CMD); + if (r) + return r; + } + } + + list_for_each_entry(desc, &nandc->desc_list, node) + cookie = dmaengine_submit(desc->dma_desc); + + if (nandc->props->is_bam) { + bam_txn->last_cmd_desc->callback = qpic_bam_dma_done; + bam_txn->last_cmd_desc->callback_param = bam_txn; + if (bam_txn->last_data_desc) { + bam_txn->last_data_desc->callback = qpic_bam_dma_done; + bam_txn->last_data_desc->callback_param = bam_txn; + bam_txn->wait_second_completion = true; + } + + dma_async_issue_pending(nandc->tx_chan); + dma_async_issue_pending(nandc->rx_chan); + dma_async_issue_pending(nandc->cmd_chan); + + if (!wait_for_completion_timeout(&bam_txn->txn_done, + QPIC_NAND_COMPLETION_TIMEOUT)) + return -ETIMEDOUT; + } else { + if (dma_sync_wait(nandc->chan, cookie) != DMA_COMPLETE) + return -ETIMEDOUT; + } + + return 0; +} + +static void free_descs(struct qcom_nand_controller *nandc) +{ + struct desc_info *desc, *n; + + list_for_each_entry_safe(desc, n, &nandc->desc_list, node) { + list_del(&desc->node); + + if (nandc->props->is_bam) + dma_unmap_sg(nandc->dev, desc->bam_sgl, + desc->sgl_cnt, desc->dir); + else + dma_unmap_sg(nandc->dev, &desc->adm_sgl, 1, + desc->dir); + + kfree(desc); + } +} + +/* reset the register read buffer for next NAND operation */ +static void clear_read_regs(struct qcom_nand_controller *nandc) +{ + nandc->reg_read_pos = 0; + nandc_read_buffer_sync(nandc, false); +} + +static void pre_command(struct qcom_nand_host *host, int command) +{ + struct nand_chip *chip = &host->chip; + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + + nandc->buf_count = 0; + nandc->buf_start = 0; + host->use_ecc = false; + host->last_command = command; + + clear_read_regs(nandc); + + if (command == NAND_CMD_RESET || command == NAND_CMD_READID || + command == NAND_CMD_PARAM || command == NAND_CMD_ERASE1) + clear_bam_transaction(nandc); +} + +/* + * this is called after NAND_CMD_PAGEPROG and NAND_CMD_ERASE1 to set our + * privately maintained status byte, this status byte can be read after + * NAND_CMD_STATUS is called + */ +static void parse_erase_write_errors(struct qcom_nand_host *host, int command) +{ + struct nand_chip *chip = &host->chip; + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; + int num_cw; + int i; + + num_cw = command == NAND_CMD_PAGEPROG ? ecc->steps : 1; + nandc_read_buffer_sync(nandc, true); + + for (i = 0; i < num_cw; i++) { + u32 flash_status = le32_to_cpu(nandc->reg_read_buf[i]); + + if (flash_status & FS_MPU_ERR) + host->status &= ~NAND_STATUS_WP; + + if (flash_status & FS_OP_ERR || (i == (num_cw - 1) && + (flash_status & + FS_DEVICE_STS_ERR))) + host->status |= NAND_STATUS_FAIL; + } +} + +static void post_command(struct qcom_nand_host *host, int command) +{ + struct nand_chip *chip = &host->chip; + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + + switch (command) { + case NAND_CMD_READID: + nandc_read_buffer_sync(nandc, true); + memcpy(nandc->data_buffer, nandc->reg_read_buf, + nandc->buf_count); + break; + case NAND_CMD_PAGEPROG: + case NAND_CMD_ERASE1: + parse_erase_write_errors(host, command); + break; + default: + break; + } +} + +/* + * Implements chip->cmdfunc. It's only used for a limited set of commands. + * The rest of the commands wouldn't be called by upper layers. For example, + * NAND_CMD_READOOB would never be called because we have our own versions + * of read_oob ops for nand_ecc_ctrl. + */ +static void qcom_nandc_command(struct mtd_info *mtd, unsigned int command, + int column, int page_addr) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct qcom_nand_host *host = to_qcom_nand_host(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + bool wait = false; + int ret = 0; + + pre_command(host, command); + + switch (command) { + case NAND_CMD_RESET: + ret = reset(host); + wait = true; + break; + + case NAND_CMD_READID: + nandc->buf_count = 4; + ret = read_id(host, column); + wait = true; + break; + + case NAND_CMD_PARAM: + ret = nandc_param(host); + wait = true; + break; + + case NAND_CMD_ERASE1: + ret = erase_block(host, page_addr); + wait = true; + break; + + case NAND_CMD_READ0: + /* we read the entire page for now */ + WARN_ON(column != 0); + + host->use_ecc = true; + set_address(host, 0, page_addr); + update_rw_regs(host, ecc->steps, true); + break; + + case NAND_CMD_SEQIN: + WARN_ON(column != 0); + set_address(host, 0, page_addr); + break; + + case NAND_CMD_PAGEPROG: + case NAND_CMD_STATUS: + case NAND_CMD_NONE: + default: + break; + } + + if (ret) { + dev_err(nandc->dev, "failure executing command %d\n", + command); + free_descs(nandc); + return; + } + + if (wait) { + ret = submit_descs(nandc); + if (ret) + dev_err(nandc->dev, + "failure submitting descs for command %d\n", + command); + } + + free_descs(nandc); + + post_command(host, command); +} + +/* + * when using BCH ECC, the HW flags an error in NAND_FLASH_STATUS if it read + * an erased CW, and reports an erased CW in NAND_ERASED_CW_DETECT_STATUS. + * + * when using RS ECC, the HW reports the same erros when reading an erased CW, + * but it notifies that it is an erased CW by placing special characters at + * certain offsets in the buffer. + * + * verify if the page is erased or not, and fix up the page for RS ECC by + * replacing the special characters with 0xff. + */ +static bool erased_chunk_check_and_fixup(u8 *data_buf, int data_len) +{ + u8 empty1, empty2; + + /* + * an erased page flags an error in NAND_FLASH_STATUS, check if the page + * is erased by looking for 0x54s at offsets 3 and 175 from the + * beginning of each codeword + */ + + empty1 = data_buf[3]; + empty2 = data_buf[175]; + + /* + * if the erased codework markers, if they exist override them with + * 0xffs + */ + if ((empty1 == 0x54 && empty2 == 0xff) || + (empty1 == 0xff && empty2 == 0x54)) { + data_buf[3] = 0xff; + data_buf[175] = 0xff; + } + + /* + * check if the entire chunk contains 0xffs or not. if it doesn't, then + * restore the original values at the special offsets + */ + if (memchr_inv(data_buf, 0xff, data_len)) { + data_buf[3] = empty1; + data_buf[175] = empty2; + + return false; + } + + return true; +} + +struct read_stats { + __le32 flash; + __le32 buffer; + __le32 erased_cw; +}; + +/* reads back FLASH_STATUS register set by the controller */ +static int check_flash_errors(struct qcom_nand_host *host, int cw_cnt) +{ + struct nand_chip *chip = &host->chip; + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + int i; + + nandc_read_buffer_sync(nandc, true); + + for (i = 0; i < cw_cnt; i++) { + u32 flash = le32_to_cpu(nandc->reg_read_buf[i]); + + if (flash & (FS_OP_ERR | FS_MPU_ERR)) + return -EIO; + } + + return 0; +} + +/* performs raw read for one codeword */ +static int +qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip, + u8 *data_buf, u8 *oob_buf, int page, int cw) +{ + struct qcom_nand_host *host = to_qcom_nand_host(chip); + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; + int data_size1, data_size2, oob_size1, oob_size2; + int ret, reg_off = FLASH_BUF_ACC, read_loc = 0; + + nand_read_page_op(chip, page, 0, NULL, 0); + host->use_ecc = false; + + clear_bam_transaction(nandc); + set_address(host, host->cw_size * cw, page); + update_rw_regs(host, 1, true); + config_nand_page_read(nandc); + + data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1); + oob_size1 = host->bbm_size; + + if (cw == (ecc->steps - 1)) { + data_size2 = ecc->size - data_size1 - + ((ecc->steps - 1) * 4); + oob_size2 = (ecc->steps * 4) + host->ecc_bytes_hw + + host->spare_bytes; + } else { + data_size2 = host->cw_data - data_size1; + oob_size2 = host->ecc_bytes_hw + host->spare_bytes; + } + + if (nandc->props->is_bam) { + nandc_set_read_loc(nandc, 0, read_loc, data_size1, 0); + read_loc += data_size1; + + nandc_set_read_loc(nandc, 1, read_loc, oob_size1, 0); + read_loc += oob_size1; + + nandc_set_read_loc(nandc, 2, read_loc, data_size2, 0); + read_loc += data_size2; + + nandc_set_read_loc(nandc, 3, read_loc, oob_size2, 1); + } + + config_nand_cw_read(nandc, false); + + read_data_dma(nandc, reg_off, data_buf, data_size1, 0); + reg_off += data_size1; + + read_data_dma(nandc, reg_off, oob_buf, oob_size1, 0); + reg_off += oob_size1; + + read_data_dma(nandc, reg_off, data_buf + data_size1, data_size2, 0); + reg_off += data_size2; + + read_data_dma(nandc, reg_off, oob_buf + oob_size1, oob_size2, 0); + + ret = submit_descs(nandc); + free_descs(nandc); + if (ret) { + dev_err(nandc->dev, "failure to read raw cw %d\n", cw); + return ret; + } + + return check_flash_errors(host, 1); +} + +/* + * Bitflips can happen in erased codewords also so this function counts the + * number of 0 in each CW for which ECC engine returns the uncorrectable + * error. The page will be assumed as erased if this count is less than or + * equal to the ecc->strength for each CW. + * + * 1. Both DATA and OOB need to be checked for number of 0. The + * top-level API can be called with only data buf or OOB buf so use + * chip->data_buf if data buf is null and chip->oob_poi if oob buf + * is null for copying the raw bytes. + * 2. Perform raw read for all the CW which has uncorrectable errors. + * 3. For each CW, check the number of 0 in cw_data and usable OOB bytes. + * The BBM and spare bytes bit flip won’t affect the ECC so don’t check + * the number of bitflips in this area. + */ +static int +check_for_erased_page(struct qcom_nand_host *host, u8 *data_buf, + u8 *oob_buf, unsigned long uncorrectable_cws, + int page, unsigned int max_bitflips) +{ + struct nand_chip *chip = &host->chip; + struct mtd_info *mtd = nand_to_mtd(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; + u8 *cw_data_buf, *cw_oob_buf; + int cw, data_size, oob_size, ret = 0; + + if (!data_buf) { + data_buf = chip->data_buf; + chip->pagebuf = -1; + } + + if (!oob_buf) { + oob_buf = chip->oob_poi; + chip->pagebuf = -1; + } + + for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) { + if (cw == (ecc->steps - 1)) { + data_size = ecc->size - ((ecc->steps - 1) * 4); + oob_size = (ecc->steps * 4) + host->ecc_bytes_hw; + } else { + data_size = host->cw_data; + oob_size = host->ecc_bytes_hw; + } + + /* determine starting buffer address for current CW */ + cw_data_buf = data_buf + (cw * host->cw_data); + cw_oob_buf = oob_buf + (cw * ecc->bytes); + + ret = qcom_nandc_read_cw_raw(mtd, chip, cw_data_buf, + cw_oob_buf, page, cw); + if (ret) + return ret; + + /* + * make sure it isn't an erased page reported + * as not-erased by HW because of a few bitflips + */ + ret = nand_check_erased_ecc_chunk(cw_data_buf, data_size, + cw_oob_buf + host->bbm_size, + oob_size, NULL, + 0, ecc->strength); + if (ret < 0) { + mtd->ecc_stats.failed++; + } else { + mtd->ecc_stats.corrected += ret; + max_bitflips = max_t(unsigned int, max_bitflips, ret); + } + } + + return max_bitflips; +} + +/* + * reads back status registers set by the controller to notify page read + * errors. this is equivalent to what 'ecc->correct()' would do. + */ +static int parse_read_errors(struct qcom_nand_host *host, u8 *data_buf, + u8 *oob_buf, int page) +{ + struct nand_chip *chip = &host->chip; + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + struct mtd_info *mtd = nand_to_mtd(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; + unsigned int max_bitflips = 0, uncorrectable_cws = 0; + struct read_stats *buf; + bool flash_op_err = false, erased; + int i; + u8 *data_buf_start = data_buf, *oob_buf_start = oob_buf; + + buf = (struct read_stats *)nandc->reg_read_buf; + nandc_read_buffer_sync(nandc, true); + + for (i = 0; i < ecc->steps; i++, buf++) { + u32 flash, buffer, erased_cw; + int data_len, oob_len; + + if (i == (ecc->steps - 1)) { + data_len = ecc->size - ((ecc->steps - 1) << 2); + oob_len = ecc->steps << 2; + } else { + data_len = host->cw_data; + oob_len = 0; + } + + flash = le32_to_cpu(buf->flash); + buffer = le32_to_cpu(buf->buffer); + erased_cw = le32_to_cpu(buf->erased_cw); + + /* + * Check ECC failure for each codeword. ECC failure can + * happen in either of the following conditions + * 1. If number of bitflips are greater than ECC engine + * capability. + * 2. If this codeword contains all 0xff for which erased + * codeword detection check will be done. + */ + if ((flash & FS_OP_ERR) && (buffer & BS_UNCORRECTABLE_BIT)) { + /* + * For BCH ECC, ignore erased codeword errors, if + * ERASED_CW bits are set. + */ + if (host->bch_enabled) { + erased = (erased_cw & ERASED_CW) == ERASED_CW ? + true : false; + /* + * For RS ECC, HW reports the erased CW by placing + * special characters at certain offsets in the buffer. + * These special characters will be valid only if + * complete page is read i.e. data_buf is not NULL. + */ + } else if (data_buf) { + erased = erased_chunk_check_and_fixup(data_buf, + data_len); + } else { + erased = false; + } + + if (!erased) + uncorrectable_cws |= BIT(i); + /* + * Check if MPU or any other operational error (timeout, + * device failure, etc.) happened for this codeword and + * make flash_op_err true. If flash_op_err is set, then + * EIO will be returned for page read. + */ + } else if (flash & (FS_OP_ERR | FS_MPU_ERR)) { + flash_op_err = true; + /* + * No ECC or operational errors happened. Check the number of + * bits corrected and update the ecc_stats.corrected. + */ + } else { + unsigned int stat; + + stat = buffer & BS_CORRECTABLE_ERR_MSK; + mtd->ecc_stats.corrected += stat; + max_bitflips = max(max_bitflips, stat); + } + + if (data_buf) + data_buf += data_len; + if (oob_buf) + oob_buf += oob_len + ecc->bytes; + } + + if (flash_op_err) + return -EIO; + + if (!uncorrectable_cws) + return max_bitflips; + + return check_for_erased_page(host, data_buf_start, oob_buf_start, + uncorrectable_cws, page, + max_bitflips); +} + +/* + * helper to perform the actual page read operation, used by ecc->read_page(), + * ecc->read_oob() + */ +static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf, + u8 *oob_buf, int page) +{ + struct nand_chip *chip = &host->chip; + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; + u8 *data_buf_start = data_buf, *oob_buf_start = oob_buf; + int i, ret; + + config_nand_page_read(nandc); + + /* queue cmd descs for each codeword */ + for (i = 0; i < ecc->steps; i++) { + int data_size, oob_size; + + if (i == (ecc->steps - 1)) { + data_size = ecc->size - ((ecc->steps - 1) << 2); + oob_size = (ecc->steps << 2) + host->ecc_bytes_hw + + host->spare_bytes; + } else { + data_size = host->cw_data; + oob_size = host->ecc_bytes_hw + host->spare_bytes; + } + + if (nandc->props->is_bam) { + if (data_buf && oob_buf) { + nandc_set_read_loc(nandc, 0, 0, data_size, 0); + nandc_set_read_loc(nandc, 1, data_size, + oob_size, 1); + } else if (data_buf) { + nandc_set_read_loc(nandc, 0, 0, data_size, 1); + } else { + nandc_set_read_loc(nandc, 0, data_size, + oob_size, 1); + } + } + + config_nand_cw_read(nandc, true); + + if (data_buf) + read_data_dma(nandc, FLASH_BUF_ACC, data_buf, + data_size, 0); + + /* + * when ecc is enabled, the controller doesn't read the real + * or dummy bad block markers in each chunk. To maintain a + * consistent layout across RAW and ECC reads, we just + * leave the real/dummy BBM offsets empty (i.e, filled with + * 0xffs) + */ + if (oob_buf) { + int j; + + for (j = 0; j < host->bbm_size; j++) + *oob_buf++ = 0xff; + + read_data_dma(nandc, FLASH_BUF_ACC + data_size, + oob_buf, oob_size, 0); + } + + if (data_buf) + data_buf += data_size; + if (oob_buf) + oob_buf += oob_size; + } + + ret = submit_descs(nandc); + free_descs(nandc); + + if (ret) { + dev_err(nandc->dev, "failure to read page/oob\n"); + return ret; + } + + return parse_read_errors(host, data_buf_start, oob_buf_start, page); +} + +/* + * a helper that copies the last step/codeword of a page (containing free oob) + * into our local buffer + */ +static int copy_last_cw(struct qcom_nand_host *host, int page) +{ + struct nand_chip *chip = &host->chip; + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; + int size; + int ret; + + clear_read_regs(nandc); + + size = host->use_ecc ? host->cw_data : host->cw_size; + + /* prepare a clean read buffer */ + memset(nandc->data_buffer, 0xff, size); + + set_address(host, host->cw_size * (ecc->steps - 1), page); + update_rw_regs(host, 1, true); + + config_nand_single_cw_page_read(nandc, host->use_ecc); + + read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size, 0); + + ret = submit_descs(nandc); + if (ret) + dev_err(nandc->dev, "failed to copy last codeword\n"); + + free_descs(nandc); + + return ret; +} + +/* implements ecc->read_page() */ +static int qcom_nandc_read_page(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) +{ + struct qcom_nand_host *host = to_qcom_nand_host(chip); + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + u8 *data_buf, *oob_buf = NULL; + + nand_read_page_op(chip, page, 0, NULL, 0); + data_buf = buf; + oob_buf = oob_required ? chip->oob_poi : NULL; + + clear_bam_transaction(nandc); + + return read_page_ecc(host, data_buf, oob_buf, page); +} + +/* implements ecc->read_page_raw() */ +static int qcom_nandc_read_page_raw(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t *buf, + int oob_required, int page) +{ + struct qcom_nand_host *host = to_qcom_nand_host(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; + int cw, ret; + u8 *data_buf = buf, *oob_buf = chip->oob_poi; + + for (cw = 0; cw < ecc->steps; cw++) { + ret = qcom_nandc_read_cw_raw(mtd, chip, data_buf, oob_buf, + page, cw); + if (ret) + return ret; + + data_buf += host->cw_data; + oob_buf += ecc->bytes; + } + + return 0; +} + +/* implements ecc->read_oob() */ +static int qcom_nandc_read_oob(struct mtd_info *mtd, struct nand_chip *chip, + int page) +{ + struct qcom_nand_host *host = to_qcom_nand_host(chip); + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; + + clear_read_regs(nandc); + clear_bam_transaction(nandc); + + host->use_ecc = true; + set_address(host, 0, page); + update_rw_regs(host, ecc->steps, true); + + return read_page_ecc(host, NULL, chip->oob_poi, page); +} + +/* implements ecc->write_page() */ +static int qcom_nandc_write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required, int page) +{ + struct qcom_nand_host *host = to_qcom_nand_host(chip); + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; + u8 *data_buf, *oob_buf; + int i, ret; + + nand_prog_page_begin_op(chip, page, 0, NULL, 0); + + clear_read_regs(nandc); + clear_bam_transaction(nandc); + + data_buf = (u8 *)buf; + oob_buf = chip->oob_poi; + + host->use_ecc = true; + update_rw_regs(host, ecc->steps, false); + config_nand_page_write(nandc); + + for (i = 0; i < ecc->steps; i++) { + int data_size, oob_size; + + if (i == (ecc->steps - 1)) { + data_size = ecc->size - ((ecc->steps - 1) << 2); + oob_size = (ecc->steps << 2) + host->ecc_bytes_hw + + host->spare_bytes; + } else { + data_size = host->cw_data; + oob_size = ecc->bytes; + } + + + write_data_dma(nandc, FLASH_BUF_ACC, data_buf, data_size, + i == (ecc->steps - 1) ? NAND_BAM_NO_EOT : 0); + + /* + * when ECC is enabled, we don't really need to write anything + * to oob for the first n - 1 codewords since these oob regions + * just contain ECC bytes that's written by the controller + * itself. For the last codeword, we skip the bbm positions and + * write to the free oob area. + */ + if (i == (ecc->steps - 1)) { + oob_buf += host->bbm_size; + + write_data_dma(nandc, FLASH_BUF_ACC + data_size, + oob_buf, oob_size, 0); + } + + config_nand_cw_write(nandc); + + data_buf += data_size; + oob_buf += oob_size; + } + + ret = submit_descs(nandc); + if (ret) + dev_err(nandc->dev, "failure to write page\n"); + + free_descs(nandc); + + if (!ret) + ret = nand_prog_page_end_op(chip); + + return ret; +} + +/* implements ecc->write_page_raw() */ +static int qcom_nandc_write_page_raw(struct mtd_info *mtd, + struct nand_chip *chip, const uint8_t *buf, + int oob_required, int page) +{ + struct qcom_nand_host *host = to_qcom_nand_host(chip); + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; + u8 *data_buf, *oob_buf; + int i, ret; + + nand_prog_page_begin_op(chip, page, 0, NULL, 0); + clear_read_regs(nandc); + clear_bam_transaction(nandc); + + data_buf = (u8 *)buf; + oob_buf = chip->oob_poi; + + host->use_ecc = false; + update_rw_regs(host, ecc->steps, false); + config_nand_page_write(nandc); + + for (i = 0; i < ecc->steps; i++) { + int data_size1, data_size2, oob_size1, oob_size2; + int reg_off = FLASH_BUF_ACC; + + data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1); + oob_size1 = host->bbm_size; + + if (i == (ecc->steps - 1)) { + data_size2 = ecc->size - data_size1 - + ((ecc->steps - 1) << 2); + oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw + + host->spare_bytes; + } else { + data_size2 = host->cw_data - data_size1; + oob_size2 = host->ecc_bytes_hw + host->spare_bytes; + } + + write_data_dma(nandc, reg_off, data_buf, data_size1, + NAND_BAM_NO_EOT); + reg_off += data_size1; + data_buf += data_size1; + + write_data_dma(nandc, reg_off, oob_buf, oob_size1, + NAND_BAM_NO_EOT); + reg_off += oob_size1; + oob_buf += oob_size1; + + write_data_dma(nandc, reg_off, data_buf, data_size2, + NAND_BAM_NO_EOT); + reg_off += data_size2; + data_buf += data_size2; + + write_data_dma(nandc, reg_off, oob_buf, oob_size2, 0); + oob_buf += oob_size2; + + config_nand_cw_write(nandc); + } + + ret = submit_descs(nandc); + if (ret) + dev_err(nandc->dev, "failure to write raw page\n"); + + free_descs(nandc); + + if (!ret) + ret = nand_prog_page_end_op(chip); + + return ret; +} + +/* + * implements ecc->write_oob() + * + * the NAND controller cannot write only data or only OOB within a codeword + * since ECC is calculated for the combined codeword. So update the OOB from + * chip->oob_poi, and pad the data area with OxFF before writing. + */ +static int qcom_nandc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, + int page) +{ + struct qcom_nand_host *host = to_qcom_nand_host(chip); + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; + u8 *oob = chip->oob_poi; + int data_size, oob_size; + int ret; + + host->use_ecc = true; + clear_bam_transaction(nandc); + + /* calculate the data and oob size for the last codeword/step */ + data_size = ecc->size - ((ecc->steps - 1) << 2); + oob_size = mtd->oobavail; + + memset(nandc->data_buffer, 0xff, host->cw_data); + /* override new oob content to last codeword */ + mtd_ooblayout_get_databytes(mtd, nandc->data_buffer + data_size, oob, + 0, mtd->oobavail); + + set_address(host, host->cw_size * (ecc->steps - 1), page); + update_rw_regs(host, 1, false); + + config_nand_page_write(nandc); + write_data_dma(nandc, FLASH_BUF_ACC, + nandc->data_buffer, data_size + oob_size, 0); + config_nand_cw_write(nandc); + + ret = submit_descs(nandc); + + free_descs(nandc); + + if (ret) { + dev_err(nandc->dev, "failure to write oob\n"); + return -EIO; + } + + return nand_prog_page_end_op(chip); +} + +static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct qcom_nand_host *host = to_qcom_nand_host(chip); + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; + int page, ret, bbpos, bad = 0; + + page = (int)(ofs >> chip->page_shift) & chip->pagemask; + + /* + * configure registers for a raw sub page read, the address is set to + * the beginning of the last codeword, we don't care about reading ecc + * portion of oob. we just want the first few bytes from this codeword + * that contains the BBM + */ + host->use_ecc = false; + + clear_bam_transaction(nandc); + ret = copy_last_cw(host, page); + if (ret) + goto err; + + if (check_flash_errors(host, 1)) { + dev_warn(nandc->dev, "error when trying to read BBM\n"); + goto err; + } + + bbpos = mtd->writesize - host->cw_size * (ecc->steps - 1); + + bad = nandc->data_buffer[bbpos] != 0xff; + + if (chip->options & NAND_BUSWIDTH_16) + bad = bad || (nandc->data_buffer[bbpos + 1] != 0xff); +err: + return bad; +} + +static int qcom_nandc_block_markbad(struct mtd_info *mtd, loff_t ofs) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct qcom_nand_host *host = to_qcom_nand_host(chip); + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; + int page, ret; + + clear_read_regs(nandc); + clear_bam_transaction(nandc); + + /* + * to mark the BBM as bad, we flash the entire last codeword with 0s. + * we don't care about the rest of the content in the codeword since + * we aren't going to use this block again + */ + memset(nandc->data_buffer, 0x00, host->cw_size); + + page = (int)(ofs >> chip->page_shift) & chip->pagemask; + + /* prepare write */ + host->use_ecc = false; + set_address(host, host->cw_size * (ecc->steps - 1), page); + update_rw_regs(host, 1, false); + + config_nand_page_write(nandc); + write_data_dma(nandc, FLASH_BUF_ACC, + nandc->data_buffer, host->cw_size, 0); + config_nand_cw_write(nandc); + + ret = submit_descs(nandc); + + free_descs(nandc); + + if (ret) { + dev_err(nandc->dev, "failure to update BBM\n"); + return -EIO; + } + + return nand_prog_page_end_op(chip); +} + +/* + * the three functions below implement chip->read_byte(), chip->read_buf() + * and chip->write_buf() respectively. these aren't used for + * reading/writing page data, they are used for smaller data like reading + * id, status etc + */ +static uint8_t qcom_nandc_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct qcom_nand_host *host = to_qcom_nand_host(chip); + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + u8 *buf = nandc->data_buffer; + u8 ret = 0x0; + + if (host->last_command == NAND_CMD_STATUS) { + ret = host->status; + + host->status = NAND_STATUS_READY | NAND_STATUS_WP; + + return ret; + } + + if (nandc->buf_start < nandc->buf_count) + ret = buf[nandc->buf_start++]; + + return ret; +} + +static void qcom_nandc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + int real_len = min_t(size_t, len, nandc->buf_count - nandc->buf_start); + + memcpy(buf, nandc->data_buffer + nandc->buf_start, real_len); + nandc->buf_start += real_len; +} + +static void qcom_nandc_write_buf(struct mtd_info *mtd, const uint8_t *buf, + int len) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + int real_len = min_t(size_t, len, nandc->buf_count - nandc->buf_start); + + memcpy(nandc->data_buffer + nandc->buf_start, buf, real_len); + + nandc->buf_start += real_len; +} + +/* we support only one external chip for now */ +static void qcom_nandc_select_chip(struct mtd_info *mtd, int chipnr) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + + if (chipnr <= 0) + return; + + dev_warn(nandc->dev, "invalid chip select\n"); +} + +/* + * NAND controller page layout info + * + * Layout with ECC enabled: + * + * |----------------------| |---------------------------------| + * | xx.......yy| | *********xx.......yy| + * | DATA xx..ECC..yy| | DATA **SPARE**xx..ECC..yy| + * | (516) xx.......yy| | (516-n*4) **(n*4)**xx.......yy| + * | xx.......yy| | *********xx.......yy| + * |----------------------| |---------------------------------| + * codeword 1,2..n-1 codeword n + * <---(528/532 Bytes)--> <-------(528/532 Bytes)---------> + * + * n = Number of codewords in the page + * . = ECC bytes + * * = Spare/free bytes + * x = Unused byte(s) + * y = Reserved byte(s) + * + * 2K page: n = 4, spare = 16 bytes + * 4K page: n = 8, spare = 32 bytes + * 8K page: n = 16, spare = 64 bytes + * + * the qcom nand controller operates at a sub page/codeword level. each + * codeword is 528 and 532 bytes for 4 bit and 8 bit ECC modes respectively. + * the number of ECC bytes vary based on the ECC strength and the bus width. + * + * the first n - 1 codewords contains 516 bytes of user data, the remaining + * 12/16 bytes consist of ECC and reserved data. The nth codeword contains + * both user data and spare(oobavail) bytes that sum up to 516 bytes. + * + * When we access a page with ECC enabled, the reserved bytes(s) are not + * accessible at all. When reading, we fill up these unreadable positions + * with 0xffs. When writing, the controller skips writing the inaccessible + * bytes. + * + * Layout with ECC disabled: + * + * |------------------------------| |---------------------------------------| + * | yy xx.......| | bb *********xx.......| + * | DATA1 yy DATA2 xx..ECC..| | DATA1 bb DATA2 **SPARE**xx..ECC..| + * | (size1) yy (size2) xx.......| | (size1) bb (size2) **(n*4)**xx.......| + * | yy xx.......| | bb *********xx.......| + * |------------------------------| |---------------------------------------| + * codeword 1,2..n-1 codeword n + * <-------(528/532 Bytes)------> <-----------(528/532 Bytes)-----------> + * + * n = Number of codewords in the page + * . = ECC bytes + * * = Spare/free bytes + * x = Unused byte(s) + * y = Dummy Bad Bock byte(s) + * b = Real Bad Block byte(s) + * size1/size2 = function of codeword size and 'n' + * + * when the ECC block is disabled, one reserved byte (or two for 16 bit bus + * width) is now accessible. For the first n - 1 codewords, these are dummy Bad + * Block Markers. In the last codeword, this position contains the real BBM + * + * In order to have a consistent layout between RAW and ECC modes, we assume + * the following OOB layout arrangement: + * + * |-----------| |--------------------| + * |yyxx.......| |bb*********xx.......| + * |yyxx..ECC..| |bb*FREEOOB*xx..ECC..| + * |yyxx.......| |bb*********xx.......| + * |yyxx.......| |bb*********xx.......| + * |-----------| |--------------------| + * first n - 1 nth OOB region + * OOB regions + * + * n = Number of codewords in the page + * . = ECC bytes + * * = FREE OOB bytes + * y = Dummy bad block byte(s) (inaccessible when ECC enabled) + * x = Unused byte(s) + * b = Real bad block byte(s) (inaccessible when ECC enabled) + * + * This layout is read as is when ECC is disabled. When ECC is enabled, the + * inaccessible Bad Block byte(s) are ignored when we write to a page/oob, + * and assumed as 0xffs when we read a page/oob. The ECC, unused and + * dummy/real bad block bytes are grouped as ecc bytes (i.e, ecc->bytes is + * the sum of the three). + */ +static int qcom_nand_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct qcom_nand_host *host = to_qcom_nand_host(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; + + if (section > 1) + return -ERANGE; + + if (!section) { + oobregion->length = (ecc->bytes * (ecc->steps - 1)) + + host->bbm_size; + oobregion->offset = 0; + } else { + oobregion->length = host->ecc_bytes_hw + host->spare_bytes; + oobregion->offset = mtd->oobsize - oobregion->length; + } + + return 0; +} + +static int qcom_nand_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct qcom_nand_host *host = to_qcom_nand_host(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; + + if (section) + return -ERANGE; + + oobregion->length = ecc->steps * 4; + oobregion->offset = ((ecc->steps - 1) * ecc->bytes) + host->bbm_size; + + return 0; +} + +static const struct mtd_ooblayout_ops qcom_nand_ooblayout_ops = { + .ecc = qcom_nand_ooblayout_ecc, + .free = qcom_nand_ooblayout_free, +}; + +static int +qcom_nandc_calc_ecc_bytes(int step_size, int strength) +{ + return strength == 4 ? 12 : 16; +} +NAND_ECC_CAPS_SINGLE(qcom_nandc_ecc_caps, qcom_nandc_calc_ecc_bytes, + NANDC_STEP_SIZE, 4, 8); + +static int qcom_nand_attach_chip(struct nand_chip *chip) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + struct qcom_nand_host *host = to_qcom_nand_host(chip); + struct nand_ecc_ctrl *ecc = &chip->ecc; + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); + int cwperpage, bad_block_byte, ret; + bool wide_bus; + int ecc_mode = 1; + + /* controller only supports 512 bytes data steps */ + ecc->size = NANDC_STEP_SIZE; + wide_bus = chip->options & NAND_BUSWIDTH_16 ? true : false; + cwperpage = mtd->writesize / NANDC_STEP_SIZE; + + /* + * Each CW has 4 available OOB bytes which will be protected with ECC + * so remaining bytes can be used for ECC. + */ + ret = nand_ecc_choose_conf(chip, &qcom_nandc_ecc_caps, + mtd->oobsize - (cwperpage * 4)); + if (ret) { + dev_err(nandc->dev, "No valid ECC settings possible\n"); + return ret; + } + + if (ecc->strength >= 8) { + /* 8 bit ECC defaults to BCH ECC on all platforms */ + host->bch_enabled = true; + ecc_mode = 1; + + if (wide_bus) { + host->ecc_bytes_hw = 14; + host->spare_bytes = 0; + host->bbm_size = 2; + } else { + host->ecc_bytes_hw = 13; + host->spare_bytes = 2; + host->bbm_size = 1; + } + } else { + /* + * if the controller supports BCH for 4 bit ECC, the controller + * uses lesser bytes for ECC. If RS is used, the ECC bytes is + * always 10 bytes + */ + if (nandc->props->ecc_modes & ECC_BCH_4BIT) { + /* BCH */ + host->bch_enabled = true; + ecc_mode = 0; + + if (wide_bus) { + host->ecc_bytes_hw = 8; + host->spare_bytes = 2; + host->bbm_size = 2; + } else { + host->ecc_bytes_hw = 7; + host->spare_bytes = 4; + host->bbm_size = 1; + } + } else { + /* RS */ + host->ecc_bytes_hw = 10; + + if (wide_bus) { + host->spare_bytes = 0; + host->bbm_size = 2; + } else { + host->spare_bytes = 1; + host->bbm_size = 1; + } + } + } + + /* + * we consider ecc->bytes as the sum of all the non-data content in a + * step. It gives us a clean representation of the oob area (even if + * all the bytes aren't used for ECC).It is always 16 bytes for 8 bit + * ECC and 12 bytes for 4 bit ECC + */ + ecc->bytes = host->ecc_bytes_hw + host->spare_bytes + host->bbm_size; + + ecc->read_page = qcom_nandc_read_page; + ecc->read_page_raw = qcom_nandc_read_page_raw; + ecc->read_oob = qcom_nandc_read_oob; + ecc->write_page = qcom_nandc_write_page; + ecc->write_page_raw = qcom_nandc_write_page_raw; + ecc->write_oob = qcom_nandc_write_oob; + + ecc->mode = NAND_ECC_HW; + + mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops); + + nandc->max_cwperpage = max_t(unsigned int, nandc->max_cwperpage, + cwperpage); + + /* + * DATA_UD_BYTES varies based on whether the read/write command protects + * spare data with ECC too. We protect spare data by default, so we set + * it to main + spare data, which are 512 and 4 bytes respectively. + */ + host->cw_data = 516; + + /* + * total bytes in a step, either 528 bytes for 4 bit ECC, or 532 bytes + * for 8 bit ECC + */ + host->cw_size = host->cw_data + ecc->bytes; + bad_block_byte = mtd->writesize - host->cw_size * (cwperpage - 1) + 1; + + host->cfg0 = (cwperpage - 1) << CW_PER_PAGE + | host->cw_data << UD_SIZE_BYTES + | 0 << DISABLE_STATUS_AFTER_WRITE + | 5 << NUM_ADDR_CYCLES + | host->ecc_bytes_hw << ECC_PARITY_SIZE_BYTES_RS + | 0 << STATUS_BFR_READ + | 1 << SET_RD_MODE_AFTER_STATUS + | host->spare_bytes << SPARE_SIZE_BYTES; + + host->cfg1 = 7 << NAND_RECOVERY_CYCLES + | 0 << CS_ACTIVE_BSY + | bad_block_byte << BAD_BLOCK_BYTE_NUM + | 0 << BAD_BLOCK_IN_SPARE_AREA + | 2 << WR_RD_BSY_GAP + | wide_bus << WIDE_FLASH + | host->bch_enabled << ENABLE_BCH_ECC; + + host->cfg0_raw = (cwperpage - 1) << CW_PER_PAGE + | host->cw_size << UD_SIZE_BYTES + | 5 << NUM_ADDR_CYCLES + | 0 << SPARE_SIZE_BYTES; + + host->cfg1_raw = 7 << NAND_RECOVERY_CYCLES + | 0 << CS_ACTIVE_BSY + | 17 << BAD_BLOCK_BYTE_NUM + | 1 << BAD_BLOCK_IN_SPARE_AREA + | 2 << WR_RD_BSY_GAP + | wide_bus << WIDE_FLASH + | 1 << DEV0_CFG1_ECC_DISABLE; + + host->ecc_bch_cfg = !host->bch_enabled << ECC_CFG_ECC_DISABLE + | 0 << ECC_SW_RESET + | host->cw_data << ECC_NUM_DATA_BYTES + | 1 << ECC_FORCE_CLK_OPEN + | ecc_mode << ECC_MODE + | host->ecc_bytes_hw << ECC_PARITY_SIZE_BYTES_BCH; + + host->ecc_buf_cfg = 0x203 << NUM_STEPS; + + host->clrflashstatus = FS_READY_BSY_N; + host->clrreadstatus = 0xc0; + nandc->regs->erased_cw_detect_cfg_clr = + cpu_to_le32(CLR_ERASED_PAGE_DET); + nandc->regs->erased_cw_detect_cfg_set = + cpu_to_le32(SET_ERASED_PAGE_DET); + + dev_dbg(nandc->dev, + "cfg0 %x cfg1 %x ecc_buf_cfg %x ecc_bch cfg %x cw_size %d cw_data %d strength %d parity_bytes %d steps %d\n", + host->cfg0, host->cfg1, host->ecc_buf_cfg, host->ecc_bch_cfg, + host->cw_size, host->cw_data, ecc->strength, ecc->bytes, + cwperpage); + + return 0; +} + +static const struct nand_controller_ops qcom_nandc_ops = { + .attach_chip = qcom_nand_attach_chip, +}; + +static int qcom_nandc_alloc(struct qcom_nand_controller *nandc) +{ + int ret; + + ret = dma_set_coherent_mask(nandc->dev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(nandc->dev, "failed to set DMA mask\n"); + return ret; + } + + /* + * we use the internal buffer for reading ONFI params, reading small + * data like ID and status, and preforming read-copy-write operations + * when writing to a codeword partially. 532 is the maximum possible + * size of a codeword for our nand controller + */ + nandc->buf_size = 532; + + nandc->data_buffer = devm_kzalloc(nandc->dev, nandc->buf_size, + GFP_KERNEL); + if (!nandc->data_buffer) + return -ENOMEM; + + nandc->regs = devm_kzalloc(nandc->dev, sizeof(*nandc->regs), + GFP_KERNEL); + if (!nandc->regs) + return -ENOMEM; + + nandc->reg_read_buf = devm_kcalloc(nandc->dev, + MAX_REG_RD, sizeof(*nandc->reg_read_buf), + GFP_KERNEL); + if (!nandc->reg_read_buf) + return -ENOMEM; + + if (nandc->props->is_bam) { + nandc->reg_read_dma = + dma_map_single(nandc->dev, nandc->reg_read_buf, + MAX_REG_RD * + sizeof(*nandc->reg_read_buf), + DMA_FROM_DEVICE); + if (dma_mapping_error(nandc->dev, nandc->reg_read_dma)) { + dev_err(nandc->dev, "failed to DMA MAP reg buffer\n"); + return -EIO; + } + + nandc->tx_chan = dma_request_slave_channel(nandc->dev, "tx"); + if (!nandc->tx_chan) { + dev_err(nandc->dev, "failed to request tx channel\n"); + return -ENODEV; + } + + nandc->rx_chan = dma_request_slave_channel(nandc->dev, "rx"); + if (!nandc->rx_chan) { + dev_err(nandc->dev, "failed to request rx channel\n"); + return -ENODEV; + } + + nandc->cmd_chan = dma_request_slave_channel(nandc->dev, "cmd"); + if (!nandc->cmd_chan) { + dev_err(nandc->dev, "failed to request cmd channel\n"); + return -ENODEV; + } + + /* + * Initially allocate BAM transaction to read ONFI param page. + * After detecting all the devices, this BAM transaction will + * be freed and the next BAM tranasction will be allocated with + * maximum codeword size + */ + nandc->max_cwperpage = 1; + nandc->bam_txn = alloc_bam_transaction(nandc); + if (!nandc->bam_txn) { + dev_err(nandc->dev, + "failed to allocate bam transaction\n"); + return -ENOMEM; + } + } else { + nandc->chan = dma_request_slave_channel(nandc->dev, "rxtx"); + if (!nandc->chan) { + dev_err(nandc->dev, + "failed to request slave channel\n"); + return -ENODEV; + } + } + + INIT_LIST_HEAD(&nandc->desc_list); + INIT_LIST_HEAD(&nandc->host_list); + + nand_controller_init(&nandc->controller); + nandc->controller.ops = &qcom_nandc_ops; + + return 0; +} + +static void qcom_nandc_unalloc(struct qcom_nand_controller *nandc) +{ + if (nandc->props->is_bam) { + if (!dma_mapping_error(nandc->dev, nandc->reg_read_dma)) + dma_unmap_single(nandc->dev, nandc->reg_read_dma, + MAX_REG_RD * + sizeof(*nandc->reg_read_buf), + DMA_FROM_DEVICE); + + if (nandc->tx_chan) + dma_release_channel(nandc->tx_chan); + + if (nandc->rx_chan) + dma_release_channel(nandc->rx_chan); + + if (nandc->cmd_chan) + dma_release_channel(nandc->cmd_chan); + } else { + if (nandc->chan) + dma_release_channel(nandc->chan); + } +} + +/* one time setup of a few nand controller registers */ +static int qcom_nandc_setup(struct qcom_nand_controller *nandc) +{ + u32 nand_ctrl; + + /* kill onenand */ + if (!nandc->props->is_qpic) + nandc_write(nandc, SFLASHC_BURST_CFG, 0); + nandc_write(nandc, dev_cmd_reg_addr(nandc, NAND_DEV_CMD_VLD), + NAND_DEV_CMD_VLD_VAL); + + /* enable ADM or BAM DMA */ + if (nandc->props->is_bam) { + nand_ctrl = nandc_read(nandc, NAND_CTRL); + nandc_write(nandc, NAND_CTRL, nand_ctrl | BAM_MODE_EN); + } else { + nandc_write(nandc, NAND_FLASH_CHIP_SELECT, DM_EN); + } + + /* save the original values of these registers */ + nandc->cmd1 = nandc_read(nandc, dev_cmd_reg_addr(nandc, NAND_DEV_CMD1)); + nandc->vld = NAND_DEV_CMD_VLD_VAL; + + return 0; +} + +static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc, + struct qcom_nand_host *host, + struct device_node *dn) +{ + struct nand_chip *chip = &host->chip; + struct mtd_info *mtd = nand_to_mtd(chip); + struct device *dev = nandc->dev; + int ret; + + ret = of_property_read_u32(dn, "reg", &host->cs); + if (ret) { + dev_err(dev, "can't get chip-select\n"); + return -ENXIO; + } + + nand_set_flash_node(chip, dn); + mtd->name = devm_kasprintf(dev, GFP_KERNEL, "qcom_nand.%d", host->cs); + if (!mtd->name) + return -ENOMEM; + + mtd->owner = THIS_MODULE; + mtd->dev.parent = dev; + + chip->cmdfunc = qcom_nandc_command; + chip->select_chip = qcom_nandc_select_chip; + chip->read_byte = qcom_nandc_read_byte; + chip->read_buf = qcom_nandc_read_buf; + chip->write_buf = qcom_nandc_write_buf; + chip->set_features = nand_get_set_features_notsupp; + chip->get_features = nand_get_set_features_notsupp; + + /* + * the bad block marker is readable only when we read the last codeword + * of a page with ECC disabled. currently, the nand_base and nand_bbt + * helpers don't allow us to read BB from a nand chip with ECC + * disabled (MTD_OPS_PLACE_OOB is set by default). use the block_bad + * and block_markbad helpers until we permanently switch to using + * MTD_OPS_RAW for all drivers (with the help of badblockbits) + */ + chip->block_bad = qcom_nandc_block_bad; + chip->block_markbad = qcom_nandc_block_markbad; + + chip->controller = &nandc->controller; + chip->options |= NAND_NO_SUBPAGE_WRITE | NAND_USE_BOUNCE_BUFFER | + NAND_SKIP_BBTSCAN; + + /* set up initial status value */ + host->status = NAND_STATUS_READY | NAND_STATUS_WP; + + ret = nand_scan(chip, 1); + if (ret) + return ret; + + if (nandc->props->is_bam) { + free_bam_transaction(nandc); + nandc->bam_txn = alloc_bam_transaction(nandc); + if (!nandc->bam_txn) { + dev_err(nandc->dev, + "failed to allocate bam transaction\n"); + return -ENOMEM; + } + } + + ret = mtd_device_register(mtd, NULL, 0); + if (ret) + nand_cleanup(chip); + + return ret; +} + +static int qcom_probe_nand_devices(struct qcom_nand_controller *nandc) +{ + struct device *dev = nandc->dev; + struct device_node *dn = dev->of_node, *child; + struct qcom_nand_host *host; + int ret = -ENODEV; + + for_each_available_child_of_node(dn, child) { + host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); + if (!host) { + of_node_put(child); + return -ENOMEM; + } + + ret = qcom_nand_host_init_and_register(nandc, host, child); + if (ret) { + devm_kfree(dev, host); + continue; + } + + list_add_tail(&host->node, &nandc->host_list); + } + + return ret; +} + +/* parse custom DT properties here */ +static int qcom_nandc_parse_dt(struct platform_device *pdev) +{ + struct qcom_nand_controller *nandc = platform_get_drvdata(pdev); + struct device_node *np = nandc->dev->of_node; + int ret; + + if (!nandc->props->is_bam) { + ret = of_property_read_u32(np, "qcom,cmd-crci", + &nandc->cmd_crci); + if (ret) { + dev_err(nandc->dev, "command CRCI unspecified\n"); + return ret; + } + + ret = of_property_read_u32(np, "qcom,data-crci", + &nandc->data_crci); + if (ret) { + dev_err(nandc->dev, "data CRCI unspecified\n"); + return ret; + } + } + + return 0; +} + +static int qcom_nandc_probe(struct platform_device *pdev) +{ + struct qcom_nand_controller *nandc; + const void *dev_data; + struct device *dev = &pdev->dev; + struct resource *res; + int ret; + + nandc = devm_kzalloc(&pdev->dev, sizeof(*nandc), GFP_KERNEL); + if (!nandc) + return -ENOMEM; + + platform_set_drvdata(pdev, nandc); + nandc->dev = dev; + + dev_data = of_device_get_match_data(dev); + if (!dev_data) { + dev_err(&pdev->dev, "failed to get device data\n"); + return -ENODEV; + } + + nandc->props = dev_data; + + nandc->core_clk = devm_clk_get(dev, "core"); + if (IS_ERR(nandc->core_clk)) + return PTR_ERR(nandc->core_clk); + + nandc->aon_clk = devm_clk_get(dev, "aon"); + if (IS_ERR(nandc->aon_clk)) + return PTR_ERR(nandc->aon_clk); + + ret = qcom_nandc_parse_dt(pdev); + if (ret) + return ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + nandc->base = devm_ioremap_resource(dev, res); + if (IS_ERR(nandc->base)) + return PTR_ERR(nandc->base); + + nandc->base_phys = res->start; + nandc->base_dma = dma_map_resource(dev, res->start, + resource_size(res), + DMA_BIDIRECTIONAL, 0); + if (!nandc->base_dma) + return -ENXIO; + + ret = clk_prepare_enable(nandc->core_clk); + if (ret) + goto err_core_clk; + + ret = clk_prepare_enable(nandc->aon_clk); + if (ret) + goto err_aon_clk; + + ret = qcom_nandc_alloc(nandc); + if (ret) + goto err_nandc_alloc; + + ret = qcom_nandc_setup(nandc); + if (ret) + goto err_setup; + + ret = qcom_probe_nand_devices(nandc); + if (ret) + goto err_setup; + + return 0; + +err_setup: + qcom_nandc_unalloc(nandc); +err_nandc_alloc: + clk_disable_unprepare(nandc->aon_clk); +err_aon_clk: + clk_disable_unprepare(nandc->core_clk); +err_core_clk: + dma_unmap_resource(dev, res->start, resource_size(res), + DMA_BIDIRECTIONAL, 0); + return ret; +} + +static int qcom_nandc_remove(struct platform_device *pdev) +{ + struct qcom_nand_controller *nandc = platform_get_drvdata(pdev); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct qcom_nand_host *host; + + list_for_each_entry(host, &nandc->host_list, node) + nand_release(&host->chip); + + + qcom_nandc_unalloc(nandc); + + clk_disable_unprepare(nandc->aon_clk); + clk_disable_unprepare(nandc->core_clk); + + dma_unmap_resource(&pdev->dev, nandc->base_dma, resource_size(res), + DMA_BIDIRECTIONAL, 0); + + return 0; +} + +static const struct qcom_nandc_props ipq806x_nandc_props = { + .ecc_modes = (ECC_RS_4BIT | ECC_BCH_8BIT), + .is_bam = false, + .dev_cmd_reg_start = 0x0, +}; + +static const struct qcom_nandc_props ipq4019_nandc_props = { + .ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT), + .is_bam = true, + .is_qpic = true, + .dev_cmd_reg_start = 0x0, +}; + +static const struct qcom_nandc_props ipq8074_nandc_props = { + .ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT), + .is_bam = true, + .is_qpic = true, + .dev_cmd_reg_start = 0x7000, +}; + +/* + * data will hold a struct pointer containing more differences once we support + * more controller variants + */ +static const struct of_device_id qcom_nandc_of_match[] = { + { + .compatible = "qcom,ipq806x-nand", + .data = &ipq806x_nandc_props, + }, + { + .compatible = "qcom,ipq4019-nand", + .data = &ipq4019_nandc_props, + }, + { + .compatible = "qcom,ipq8074-nand", + .data = &ipq8074_nandc_props, + }, + {} +}; +MODULE_DEVICE_TABLE(of, qcom_nandc_of_match); + +static struct platform_driver qcom_nandc_driver = { + .driver = { + .name = "qcom-nandc", + .of_match_table = qcom_nandc_of_match, + }, + .probe = qcom_nandc_probe, + .remove = qcom_nandc_remove, +}; +module_platform_driver(qcom_nandc_driver); + +MODULE_AUTHOR("Archit Taneja <architt@codeaurora.org>"); +MODULE_DESCRIPTION("Qualcomm NAND Controller driver"); +MODULE_LICENSE("GPL v2"); |