Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 257 insertions, 0 deletions

diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
new file mode 100644
index 000000000..20a09fe79
--- /dev/null
+++ b/drivers/spi/spi-dw.h
@@ -0,0 +1,257 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef DW_SPI_HEADER_H
+#define DW_SPI_HEADER_H
+
+#include <linux/io.h>
+#include <linux/scatterlist.h>
+#include <linux/gpio.h>
+
+/* Register offsets */
+#define DW_SPI_CTRL0			0x00
+#define DW_SPI_CTRL1			0x04
+#define DW_SPI_SSIENR			0x08
+#define DW_SPI_MWCR			0x0c
+#define DW_SPI_SER			0x10
+#define DW_SPI_BAUDR			0x14
+#define DW_SPI_TXFLTR			0x18
+#define DW_SPI_RXFLTR			0x1c
+#define DW_SPI_TXFLR			0x20
+#define DW_SPI_RXFLR			0x24
+#define DW_SPI_SR			0x28
+#define DW_SPI_IMR			0x2c
+#define DW_SPI_ISR			0x30
+#define DW_SPI_RISR			0x34
+#define DW_SPI_TXOICR			0x38
+#define DW_SPI_RXOICR			0x3c
+#define DW_SPI_RXUICR			0x40
+#define DW_SPI_MSTICR			0x44
+#define DW_SPI_ICR			0x48
+#define DW_SPI_DMACR			0x4c
+#define DW_SPI_DMATDLR			0x50
+#define DW_SPI_DMARDLR			0x54
+#define DW_SPI_IDR			0x58
+#define DW_SPI_VERSION			0x5c
+#define DW_SPI_DR			0x60
+
+/* Bit fields in CTRLR0 */
+#define SPI_DFS_OFFSET			0
+
+#define SPI_FRF_OFFSET			4
+#define SPI_FRF_SPI			0x0
+#define SPI_FRF_SSP			0x1
+#define SPI_FRF_MICROWIRE		0x2
+#define SPI_FRF_RESV			0x3
+
+#define SPI_MODE_OFFSET			6
+#define SPI_SCPH_OFFSET			6
+#define SPI_SCOL_OFFSET			7
+
+#define SPI_TMOD_OFFSET			8
+#define SPI_TMOD_MASK			(0x3 << SPI_TMOD_OFFSET)
+#define	SPI_TMOD_TR			0x0		/* xmit & recv */
+#define SPI_TMOD_TO			0x1		/* xmit only */
+#define SPI_TMOD_RO			0x2		/* recv only */
+#define SPI_TMOD_EPROMREAD		0x3		/* eeprom read mode */
+
+#define SPI_SLVOE_OFFSET		10
+#define SPI_SRL_OFFSET			11
+#define SPI_CFS_OFFSET			12
+
+/* Bit fields in SR, 7 bits */
+#define SR_MASK				0x7f		/* cover 7 bits */
+#define SR_BUSY				(1 << 0)
+#define SR_TF_NOT_FULL			(1 << 1)
+#define SR_TF_EMPT			(1 << 2)
+#define SR_RF_NOT_EMPT			(1 << 3)
+#define SR_RF_FULL			(1 << 4)
+#define SR_TX_ERR			(1 << 5)
+#define SR_DCOL				(1 << 6)
+
+/* Bit fields in ISR, IMR, RISR, 7 bits */
+#define SPI_INT_TXEI			(1 << 0)
+#define SPI_INT_TXOI			(1 << 1)
+#define SPI_INT_RXUI			(1 << 2)
+#define SPI_INT_RXOI			(1 << 3)
+#define SPI_INT_RXFI			(1 << 4)
+#define SPI_INT_MSTI			(1 << 5)
+
+/* Bit fields in DMACR */
+#define SPI_DMA_RDMAE			(1 << 0)
+#define SPI_DMA_TDMAE			(1 << 1)
+
+/* TX RX interrupt level threshold, max can be 256 */
+#define SPI_INT_THRESHOLD		32
+
+enum dw_ssi_type {
+	SSI_MOTO_SPI = 0,
+	SSI_TI_SSP,
+	SSI_NS_MICROWIRE,
+};
+
+struct dw_spi;
+struct dw_spi_dma_ops {
+	int (*dma_init)(struct dw_spi *dws);
+	void (*dma_exit)(struct dw_spi *dws);
+	int (*dma_setup)(struct dw_spi *dws, struct spi_transfer *xfer);
+	bool (*can_dma)(struct spi_controller *master, struct spi_device *spi,
+			struct spi_transfer *xfer);
+	int (*dma_transfer)(struct dw_spi *dws, struct spi_transfer *xfer);
+	void (*dma_stop)(struct dw_spi *dws);
+};
+
+struct dw_spi {
+	struct spi_controller	*master;
+	enum dw_ssi_type	type;
+
+	void __iomem		*regs;
+	unsigned long		paddr;
+	int			irq;
+	u32			fifo_len;	/* depth of the FIFO buffer */
+	u32			max_freq;	/* max bus freq supported */
+
+	u32			reg_io_width;	/* DR I/O width in bytes */
+	u16			bus_num;
+	u16			num_cs;		/* supported slave numbers */
+	void (*set_cs)(struct spi_device *spi, bool enable);
+
+	/* Current message transfer state info */
+	size_t			len;
+	void			*tx;
+	void			*tx_end;
+	spinlock_t		buf_lock;
+	void			*rx;
+	void			*rx_end;
+	int			dma_mapped;
+	u8			n_bytes;	/* current is a 1/2 bytes op */
+	u32			dma_width;
+	irqreturn_t		(*transfer_handler)(struct dw_spi *dws);
+	u32			current_freq;	/* frequency in hz */
+
+	/* DMA info */
+	int			dma_inited;
+	struct dma_chan		*txchan;
+	struct dma_chan		*rxchan;
+	unsigned long		dma_chan_busy;
+	dma_addr_t		dma_addr; /* phy address of the Data register */
+	const struct dw_spi_dma_ops *dma_ops;
+	void			*dma_tx;
+	void			*dma_rx;
+
+	/* Bus interface info */
+	void			*priv;
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debugfs;
+#endif
+};
+
+static inline u32 dw_readl(struct dw_spi *dws, u32 offset)
+{
+	return __raw_readl(dws->regs + offset);
+}
+
+static inline u16 dw_readw(struct dw_spi *dws, u32 offset)
+{
+	return __raw_readw(dws->regs + offset);
+}
+
+static inline void dw_writel(struct dw_spi *dws, u32 offset, u32 val)
+{
+	__raw_writel(val, dws->regs + offset);
+}
+
+static inline void dw_writew(struct dw_spi *dws, u32 offset, u16 val)
+{
+	__raw_writew(val, dws->regs + offset);
+}
+
+static inline u32 dw_read_io_reg(struct dw_spi *dws, u32 offset)
+{
+	switch (dws->reg_io_width) {
+	case 2:
+		return dw_readw(dws, offset);
+	case 4:
+	default:
+		return dw_readl(dws, offset);
+	}
+}
+
+static inline void dw_write_io_reg(struct dw_spi *dws, u32 offset, u32 val)
+{
+	switch (dws->reg_io_width) {
+	case 2:
+		dw_writew(dws, offset, val);
+		break;
+	case 4:
+	default:
+		dw_writel(dws, offset, val);
+		break;
+	}
+}
+
+static inline void spi_enable_chip(struct dw_spi *dws, int enable)
+{
+	dw_writel(dws, DW_SPI_SSIENR, (enable ? 1 : 0));
+}
+
+static inline void spi_set_clk(struct dw_spi *dws, u16 div)
+{
+	dw_writel(dws, DW_SPI_BAUDR, div);
+}
+
+/* Disable IRQ bits */
+static inline void spi_mask_intr(struct dw_spi *dws, u32 mask)
+{
+	u32 new_mask;
+
+	new_mask = dw_readl(dws, DW_SPI_IMR) & ~mask;
+	dw_writel(dws, DW_SPI_IMR, new_mask);
+}
+
+/* Enable IRQ bits */
+static inline void spi_umask_intr(struct dw_spi *dws, u32 mask)
+{
+	u32 new_mask;
+
+	new_mask = dw_readl(dws, DW_SPI_IMR) | mask;
+	dw_writel(dws, DW_SPI_IMR, new_mask);
+}
+
+/*
+ * This does disable the SPI controller, interrupts, and re-enable the
+ * controller back. Transmit and receive FIFO buffers are cleared when the
+ * device is disabled.
+ */
+static inline void spi_reset_chip(struct dw_spi *dws)
+{
+	spi_enable_chip(dws, 0);
+	spi_mask_intr(dws, 0xff);
+	spi_enable_chip(dws, 1);
+}
+
+static inline void spi_shutdown_chip(struct dw_spi *dws)
+{
+	spi_enable_chip(dws, 0);
+	spi_set_clk(dws, 0);
+}
+
+/*
+ * Each SPI slave device to work with dw_api controller should
+ * has such a structure claiming its working mode (poll or PIO/DMA),
+ * which can be save in the "controller_data" member of the
+ * struct spi_device.
+ */
+struct dw_spi_chip {
+	u8 poll_mode;	/* 1 for controller polling mode */
+	u8 type;	/* SPI/SSP/MicroWire */
+	void (*cs_control)(u32 command);
+};
+
+extern void dw_spi_set_cs(struct spi_device *spi, bool enable);
+extern int dw_spi_add_host(struct device *dev, struct dw_spi *dws);
+extern void dw_spi_remove_host(struct dw_spi *dws);
+extern int dw_spi_suspend_host(struct dw_spi *dws);
+extern int dw_spi_resume_host(struct dw_spi *dws);
+
+/* platform related setup */
+extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */
+#endif /* DW_SPI_HEADER_H */