diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 01:02:30 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-06 01:02:30 +0000 |
commit | 76cb841cb886eef6b3bee341a2266c76578724ad (patch) | |
tree | f5892e5ba6cc11949952a6ce4ecbe6d516d6ce58 /drivers/thermal/qcom | |
parent | Initial commit. (diff) | |
download | linux-76cb841cb886eef6b3bee341a2266c76578724ad.tar.xz linux-76cb841cb886eef6b3bee341a2266c76578724ad.zip |
Adding upstream version 4.19.249.upstream/4.19.249upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/thermal/qcom')
-rw-r--r-- | drivers/thermal/qcom/Kconfig | 11 | ||||
-rw-r--r-- | drivers/thermal/qcom/Makefile | 2 | ||||
-rw-r--r-- | drivers/thermal/qcom/tsens-8916.c | 113 | ||||
-rw-r--r-- | drivers/thermal/qcom/tsens-8960.c | 292 | ||||
-rw-r--r-- | drivers/thermal/qcom/tsens-8974.c | 244 | ||||
-rw-r--r-- | drivers/thermal/qcom/tsens-common.c | 154 | ||||
-rw-r--r-- | drivers/thermal/qcom/tsens-v2.c | 77 | ||||
-rw-r--r-- | drivers/thermal/qcom/tsens.c | 210 | ||||
-rw-r--r-- | drivers/thermal/qcom/tsens.h | 96 |
9 files changed, 1199 insertions, 0 deletions
diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig new file mode 100644 index 000000000..be32e5abc --- /dev/null +++ b/drivers/thermal/qcom/Kconfig @@ -0,0 +1,11 @@ +config QCOM_TSENS + tristate "Qualcomm TSENS Temperature Alarm" + depends on THERMAL + depends on QCOM_QFPROM + depends on ARCH_QCOM || COMPILE_TEST + help + This enables the thermal sysfs driver for the TSENS device. It shows + up in Sysfs as a thermal zone with multiple trip points. Disabling the + thermal zone device via the mode file results in disabling the sensor. + Also able to set threshold temperature for both hot and cold and update + when a threshold is reached. diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile new file mode 100644 index 000000000..a821929ed --- /dev/null +++ b/drivers/thermal/qcom/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o +qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o diff --git a/drivers/thermal/qcom/tsens-8916.c b/drivers/thermal/qcom/tsens-8916.c new file mode 100644 index 000000000..fdf561b8b --- /dev/null +++ b/drivers/thermal/qcom/tsens-8916.c @@ -0,0 +1,113 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/platform_device.h> +#include "tsens.h" + +/* eeprom layout data for 8916 */ +#define BASE0_MASK 0x0000007f +#define BASE1_MASK 0xfe000000 +#define BASE0_SHIFT 0 +#define BASE1_SHIFT 25 + +#define S0_P1_MASK 0x00000f80 +#define S1_P1_MASK 0x003e0000 +#define S2_P1_MASK 0xf8000000 +#define S3_P1_MASK 0x000003e0 +#define S4_P1_MASK 0x000f8000 + +#define S0_P2_MASK 0x0001f000 +#define S1_P2_MASK 0x07c00000 +#define S2_P2_MASK 0x0000001f +#define S3_P2_MASK 0x00007c00 +#define S4_P2_MASK 0x01f00000 + +#define S0_P1_SHIFT 7 +#define S1_P1_SHIFT 17 +#define S2_P1_SHIFT 27 +#define S3_P1_SHIFT 5 +#define S4_P1_SHIFT 15 + +#define S0_P2_SHIFT 12 +#define S1_P2_SHIFT 22 +#define S2_P2_SHIFT 0 +#define S3_P2_SHIFT 10 +#define S4_P2_SHIFT 20 + +#define CAL_SEL_MASK 0xe0000000 +#define CAL_SEL_SHIFT 29 + +static int calibrate_8916(struct tsens_device *tmdev) +{ + int base0 = 0, base1 = 0, i; + u32 p1[5], p2[5]; + int mode = 0; + u32 *qfprom_cdata, *qfprom_csel; + + qfprom_cdata = (u32 *)qfprom_read(tmdev->dev, "calib"); + if (IS_ERR(qfprom_cdata)) + return PTR_ERR(qfprom_cdata); + + qfprom_csel = (u32 *)qfprom_read(tmdev->dev, "calib_sel"); + if (IS_ERR(qfprom_csel)) + return PTR_ERR(qfprom_csel); + + mode = (qfprom_csel[0] & CAL_SEL_MASK) >> CAL_SEL_SHIFT; + dev_dbg(tmdev->dev, "calibration mode is %d\n", mode); + + switch (mode) { + case TWO_PT_CALIB: + base1 = (qfprom_cdata[1] & BASE1_MASK) >> BASE1_SHIFT; + p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT; + p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT; + p2[2] = (qfprom_cdata[1] & S2_P2_MASK) >> S2_P2_SHIFT; + p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT; + p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT; + for (i = 0; i < tmdev->num_sensors; i++) + p2[i] = ((base1 + p2[i]) << 3); + /* Fall through */ + case ONE_PT_CALIB2: + base0 = (qfprom_cdata[0] & BASE0_MASK); + p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT; + p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT; + p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT; + p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT; + p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT; + for (i = 0; i < tmdev->num_sensors; i++) + p1[i] = (((base0) + p1[i]) << 3); + break; + default: + for (i = 0; i < tmdev->num_sensors; i++) { + p1[i] = 500; + p2[i] = 780; + } + break; + } + + compute_intercept_slope(tmdev, p1, p2, mode); + + return 0; +} + +static const struct tsens_ops ops_8916 = { + .init = init_common, + .calibrate = calibrate_8916, + .get_temp = get_temp_common, +}; + +const struct tsens_data data_8916 = { + .num_sensors = 5, + .ops = &ops_8916, + .hw_ids = (unsigned int []){0, 1, 2, 4, 5 }, +}; diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c new file mode 100644 index 000000000..0451277d3 --- /dev/null +++ b/drivers/thermal/qcom/tsens-8960.c @@ -0,0 +1,292 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/regmap.h> +#include <linux/thermal.h> +#include "tsens.h" + +#define CAL_MDEGC 30000 + +#define CONFIG_ADDR 0x3640 +#define CONFIG_ADDR_8660 0x3620 +/* CONFIG_ADDR bitmasks */ +#define CONFIG 0x9b +#define CONFIG_MASK 0xf +#define CONFIG_8660 1 +#define CONFIG_SHIFT_8660 28 +#define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660) + +#define STATUS_CNTL_ADDR_8064 0x3660 +#define CNTL_ADDR 0x3620 +/* CNTL_ADDR bitmasks */ +#define EN BIT(0) +#define SW_RST BIT(1) +#define SENSOR0_EN BIT(3) +#define SLP_CLK_ENA BIT(26) +#define SLP_CLK_ENA_8660 BIT(24) +#define MEASURE_PERIOD 1 +#define SENSOR0_SHIFT 3 + +/* INT_STATUS_ADDR bitmasks */ +#define MIN_STATUS_MASK BIT(0) +#define LOWER_STATUS_CLR BIT(1) +#define UPPER_STATUS_CLR BIT(2) +#define MAX_STATUS_MASK BIT(3) + +#define THRESHOLD_ADDR 0x3624 +/* THRESHOLD_ADDR bitmasks */ +#define THRESHOLD_MAX_LIMIT_SHIFT 24 +#define THRESHOLD_MIN_LIMIT_SHIFT 16 +#define THRESHOLD_UPPER_LIMIT_SHIFT 8 +#define THRESHOLD_LOWER_LIMIT_SHIFT 0 + +/* Initial temperature threshold values */ +#define LOWER_LIMIT_TH 0x50 +#define UPPER_LIMIT_TH 0xdf +#define MIN_LIMIT_TH 0x0 +#define MAX_LIMIT_TH 0xff + +#define S0_STATUS_ADDR 0x3628 +#define INT_STATUS_ADDR 0x363c +#define TRDY_MASK BIT(7) +#define TIMEOUT_US 100 + +static int suspend_8960(struct tsens_device *tmdev) +{ + int ret; + unsigned int mask; + struct regmap *map = tmdev->map; + + ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->ctx.threshold); + if (ret) + return ret; + + ret = regmap_read(map, CNTL_ADDR, &tmdev->ctx.control); + if (ret) + return ret; + + if (tmdev->num_sensors > 1) + mask = SLP_CLK_ENA | EN; + else + mask = SLP_CLK_ENA_8660 | EN; + + ret = regmap_update_bits(map, CNTL_ADDR, mask, 0); + if (ret) + return ret; + + return 0; +} + +static int resume_8960(struct tsens_device *tmdev) +{ + int ret; + struct regmap *map = tmdev->map; + + ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST); + if (ret) + return ret; + + /* + * Separate CONFIG restore is not needed only for 8660 as + * config is part of CTRL Addr and its restored as such + */ + if (tmdev->num_sensors > 1) { + ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG); + if (ret) + return ret; + } + + ret = regmap_write(map, THRESHOLD_ADDR, tmdev->ctx.threshold); + if (ret) + return ret; + + ret = regmap_write(map, CNTL_ADDR, tmdev->ctx.control); + if (ret) + return ret; + + return 0; +} + +static int enable_8960(struct tsens_device *tmdev, int id) +{ + int ret; + u32 reg, mask; + + ret = regmap_read(tmdev->map, CNTL_ADDR, ®); + if (ret) + return ret; + + mask = BIT(id + SENSOR0_SHIFT); + ret = regmap_write(tmdev->map, CNTL_ADDR, reg | SW_RST); + if (ret) + return ret; + + if (tmdev->num_sensors > 1) + reg |= mask | SLP_CLK_ENA | EN; + else + reg |= mask | SLP_CLK_ENA_8660 | EN; + + ret = regmap_write(tmdev->map, CNTL_ADDR, reg); + if (ret) + return ret; + + return 0; +} + +static void disable_8960(struct tsens_device *tmdev) +{ + int ret; + u32 reg_cntl; + u32 mask; + + mask = GENMASK(tmdev->num_sensors - 1, 0); + mask <<= SENSOR0_SHIFT; + mask |= EN; + + ret = regmap_read(tmdev->map, CNTL_ADDR, ®_cntl); + if (ret) + return; + + reg_cntl &= ~mask; + + if (tmdev->num_sensors > 1) + reg_cntl &= ~SLP_CLK_ENA; + else + reg_cntl &= ~SLP_CLK_ENA_8660; + + regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); +} + +static int init_8960(struct tsens_device *tmdev) +{ + int ret, i; + u32 reg_cntl; + + tmdev->map = dev_get_regmap(tmdev->dev, NULL); + if (!tmdev->map) + return -ENODEV; + + /* + * The status registers for each sensor are discontiguous + * because some SoCs have 5 sensors while others have more + * but the control registers stay in the same place, i.e + * directly after the first 5 status registers. + */ + for (i = 0; i < tmdev->num_sensors; i++) { + if (i >= 5) + tmdev->sensor[i].status = S0_STATUS_ADDR + 40; + tmdev->sensor[i].status += i * 4; + } + + reg_cntl = SW_RST; + ret = regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl); + if (ret) + return ret; + + if (tmdev->num_sensors > 1) { + reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18); + reg_cntl &= ~SW_RST; + ret = regmap_update_bits(tmdev->map, CONFIG_ADDR, + CONFIG_MASK, CONFIG); + } else { + reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16); + reg_cntl &= ~CONFIG_MASK_8660; + reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660; + } + + reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT; + ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); + if (ret) + return ret; + + reg_cntl |= EN; + ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); + if (ret) + return ret; + + return 0; +} + +static int calibrate_8960(struct tsens_device *tmdev) +{ + int i; + char *data; + + ssize_t num_read = tmdev->num_sensors; + struct tsens_sensor *s = tmdev->sensor; + + data = qfprom_read(tmdev->dev, "calib"); + if (IS_ERR(data)) + data = qfprom_read(tmdev->dev, "calib_backup"); + if (IS_ERR(data)) + return PTR_ERR(data); + + for (i = 0; i < num_read; i++, s++) + s->offset = data[i]; + + return 0; +} + +/* Temperature on y axis and ADC-code on x-axis */ +static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s) +{ + int slope, offset; + + slope = thermal_zone_get_slope(s->tzd); + offset = CAL_MDEGC - slope * s->offset; + + return adc_code * slope + offset; +} + +static int get_temp_8960(struct tsens_device *tmdev, int id, int *temp) +{ + int ret; + u32 code, trdy; + const struct tsens_sensor *s = &tmdev->sensor[id]; + unsigned long timeout; + + timeout = jiffies + usecs_to_jiffies(TIMEOUT_US); + do { + ret = regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy); + if (ret) + return ret; + if (!(trdy & TRDY_MASK)) + continue; + ret = regmap_read(tmdev->map, s->status, &code); + if (ret) + return ret; + *temp = code_to_mdegC(code, s); + return 0; + } while (time_before(jiffies, timeout)); + + return -ETIMEDOUT; +} + +static const struct tsens_ops ops_8960 = { + .init = init_8960, + .calibrate = calibrate_8960, + .get_temp = get_temp_8960, + .enable = enable_8960, + .disable = disable_8960, + .suspend = suspend_8960, + .resume = resume_8960, +}; + +const struct tsens_data data_8960 = { + .num_sensors = 11, + .ops = &ops_8960, +}; diff --git a/drivers/thermal/qcom/tsens-8974.c b/drivers/thermal/qcom/tsens-8974.c new file mode 100644 index 000000000..9baf77e8c --- /dev/null +++ b/drivers/thermal/qcom/tsens-8974.c @@ -0,0 +1,244 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/platform_device.h> +#include "tsens.h" + +/* eeprom layout data for 8974 */ +#define BASE1_MASK 0xff +#define S0_P1_MASK 0x3f00 +#define S1_P1_MASK 0xfc000 +#define S2_P1_MASK 0x3f00000 +#define S3_P1_MASK 0xfc000000 +#define S4_P1_MASK 0x3f +#define S5_P1_MASK 0xfc0 +#define S6_P1_MASK 0x3f000 +#define S7_P1_MASK 0xfc0000 +#define S8_P1_MASK 0x3f000000 +#define S8_P1_MASK_BKP 0x3f +#define S9_P1_MASK 0x3f +#define S9_P1_MASK_BKP 0xfc0 +#define S10_P1_MASK 0xfc0 +#define S10_P1_MASK_BKP 0x3f000 +#define CAL_SEL_0_1 0xc0000000 +#define CAL_SEL_2 0x40000000 +#define CAL_SEL_SHIFT 30 +#define CAL_SEL_SHIFT_2 28 + +#define S0_P1_SHIFT 8 +#define S1_P1_SHIFT 14 +#define S2_P1_SHIFT 20 +#define S3_P1_SHIFT 26 +#define S5_P1_SHIFT 6 +#define S6_P1_SHIFT 12 +#define S7_P1_SHIFT 18 +#define S8_P1_SHIFT 24 +#define S9_P1_BKP_SHIFT 6 +#define S10_P1_SHIFT 6 +#define S10_P1_BKP_SHIFT 12 + +#define BASE2_SHIFT 12 +#define BASE2_BKP_SHIFT 18 +#define S0_P2_SHIFT 20 +#define S0_P2_BKP_SHIFT 26 +#define S1_P2_SHIFT 26 +#define S2_P2_BKP_SHIFT 6 +#define S3_P2_SHIFT 6 +#define S3_P2_BKP_SHIFT 12 +#define S4_P2_SHIFT 12 +#define S4_P2_BKP_SHIFT 18 +#define S5_P2_SHIFT 18 +#define S5_P2_BKP_SHIFT 24 +#define S6_P2_SHIFT 24 +#define S7_P2_BKP_SHIFT 6 +#define S8_P2_SHIFT 6 +#define S8_P2_BKP_SHIFT 12 +#define S9_P2_SHIFT 12 +#define S9_P2_BKP_SHIFT 18 +#define S10_P2_SHIFT 18 +#define S10_P2_BKP_SHIFT 24 + +#define BASE2_MASK 0xff000 +#define BASE2_BKP_MASK 0xfc0000 +#define S0_P2_MASK 0x3f00000 +#define S0_P2_BKP_MASK 0xfc000000 +#define S1_P2_MASK 0xfc000000 +#define S1_P2_BKP_MASK 0x3f +#define S2_P2_MASK 0x3f +#define S2_P2_BKP_MASK 0xfc0 +#define S3_P2_MASK 0xfc0 +#define S3_P2_BKP_MASK 0x3f000 +#define S4_P2_MASK 0x3f000 +#define S4_P2_BKP_MASK 0xfc0000 +#define S5_P2_MASK 0xfc0000 +#define S5_P2_BKP_MASK 0x3f000000 +#define S6_P2_MASK 0x3f000000 +#define S6_P2_BKP_MASK 0x3f +#define S7_P2_MASK 0x3f +#define S7_P2_BKP_MASK 0xfc0 +#define S8_P2_MASK 0xfc0 +#define S8_P2_BKP_MASK 0x3f000 +#define S9_P2_MASK 0x3f000 +#define S9_P2_BKP_MASK 0xfc0000 +#define S10_P2_MASK 0xfc0000 +#define S10_P2_BKP_MASK 0x3f000000 + +#define BKP_SEL 0x3 +#define BKP_REDUN_SEL 0xe0000000 +#define BKP_REDUN_SHIFT 29 + +#define BIT_APPEND 0x3 + +static int calibrate_8974(struct tsens_device *tmdev) +{ + int base1 = 0, base2 = 0, i; + u32 p1[11], p2[11]; + int mode = 0; + u32 *calib, *bkp; + u32 calib_redun_sel; + + calib = (u32 *)qfprom_read(tmdev->dev, "calib"); + if (IS_ERR(calib)) + return PTR_ERR(calib); + + bkp = (u32 *)qfprom_read(tmdev->dev, "calib_backup"); + if (IS_ERR(bkp)) + return PTR_ERR(bkp); + + calib_redun_sel = bkp[1] & BKP_REDUN_SEL; + calib_redun_sel >>= BKP_REDUN_SHIFT; + + if (calib_redun_sel == BKP_SEL) { + mode = (calib[4] & CAL_SEL_0_1) >> CAL_SEL_SHIFT; + mode |= (calib[5] & CAL_SEL_2) >> CAL_SEL_SHIFT_2; + + switch (mode) { + case TWO_PT_CALIB: + base2 = (bkp[2] & BASE2_BKP_MASK) >> BASE2_BKP_SHIFT; + p2[0] = (bkp[2] & S0_P2_BKP_MASK) >> S0_P2_BKP_SHIFT; + p2[1] = (bkp[3] & S1_P2_BKP_MASK); + p2[2] = (bkp[3] & S2_P2_BKP_MASK) >> S2_P2_BKP_SHIFT; + p2[3] = (bkp[3] & S3_P2_BKP_MASK) >> S3_P2_BKP_SHIFT; + p2[4] = (bkp[3] & S4_P2_BKP_MASK) >> S4_P2_BKP_SHIFT; + p2[5] = (calib[4] & S5_P2_BKP_MASK) >> S5_P2_BKP_SHIFT; + p2[6] = (calib[5] & S6_P2_BKP_MASK); + p2[7] = (calib[5] & S7_P2_BKP_MASK) >> S7_P2_BKP_SHIFT; + p2[8] = (calib[5] & S8_P2_BKP_MASK) >> S8_P2_BKP_SHIFT; + p2[9] = (calib[5] & S9_P2_BKP_MASK) >> S9_P2_BKP_SHIFT; + p2[10] = (calib[5] & S10_P2_BKP_MASK) >> S10_P2_BKP_SHIFT; + /* Fall through */ + case ONE_PT_CALIB: + case ONE_PT_CALIB2: + base1 = bkp[0] & BASE1_MASK; + p1[0] = (bkp[0] & S0_P1_MASK) >> S0_P1_SHIFT; + p1[1] = (bkp[0] & S1_P1_MASK) >> S1_P1_SHIFT; + p1[2] = (bkp[0] & S2_P1_MASK) >> S2_P1_SHIFT; + p1[3] = (bkp[0] & S3_P1_MASK) >> S3_P1_SHIFT; + p1[4] = (bkp[1] & S4_P1_MASK); + p1[5] = (bkp[1] & S5_P1_MASK) >> S5_P1_SHIFT; + p1[6] = (bkp[1] & S6_P1_MASK) >> S6_P1_SHIFT; + p1[7] = (bkp[1] & S7_P1_MASK) >> S7_P1_SHIFT; + p1[8] = (bkp[2] & S8_P1_MASK_BKP) >> S8_P1_SHIFT; + p1[9] = (bkp[2] & S9_P1_MASK_BKP) >> S9_P1_BKP_SHIFT; + p1[10] = (bkp[2] & S10_P1_MASK_BKP) >> S10_P1_BKP_SHIFT; + break; + } + } else { + mode = (calib[1] & CAL_SEL_0_1) >> CAL_SEL_SHIFT; + mode |= (calib[3] & CAL_SEL_2) >> CAL_SEL_SHIFT_2; + + switch (mode) { + case TWO_PT_CALIB: + base2 = (calib[2] & BASE2_MASK) >> BASE2_SHIFT; + p2[0] = (calib[2] & S0_P2_MASK) >> S0_P2_SHIFT; + p2[1] = (calib[2] & S1_P2_MASK) >> S1_P2_SHIFT; + p2[2] = (calib[3] & S2_P2_MASK); + p2[3] = (calib[3] & S3_P2_MASK) >> S3_P2_SHIFT; + p2[4] = (calib[3] & S4_P2_MASK) >> S4_P2_SHIFT; + p2[5] = (calib[3] & S5_P2_MASK) >> S5_P2_SHIFT; + p2[6] = (calib[3] & S6_P2_MASK) >> S6_P2_SHIFT; + p2[7] = (calib[4] & S7_P2_MASK); + p2[8] = (calib[4] & S8_P2_MASK) >> S8_P2_SHIFT; + p2[9] = (calib[4] & S9_P2_MASK) >> S9_P2_SHIFT; + p2[10] = (calib[4] & S10_P2_MASK) >> S10_P2_SHIFT; + /* Fall through */ + case ONE_PT_CALIB: + case ONE_PT_CALIB2: + base1 = calib[0] & BASE1_MASK; + p1[0] = (calib[0] & S0_P1_MASK) >> S0_P1_SHIFT; + p1[1] = (calib[0] & S1_P1_MASK) >> S1_P1_SHIFT; + p1[2] = (calib[0] & S2_P1_MASK) >> S2_P1_SHIFT; + p1[3] = (calib[0] & S3_P1_MASK) >> S3_P1_SHIFT; + p1[4] = (calib[1] & S4_P1_MASK); + p1[5] = (calib[1] & S5_P1_MASK) >> S5_P1_SHIFT; + p1[6] = (calib[1] & S6_P1_MASK) >> S6_P1_SHIFT; + p1[7] = (calib[1] & S7_P1_MASK) >> S7_P1_SHIFT; + p1[8] = (calib[1] & S8_P1_MASK) >> S8_P1_SHIFT; + p1[9] = (calib[2] & S9_P1_MASK); + p1[10] = (calib[2] & S10_P1_MASK) >> S10_P1_SHIFT; + break; + } + } + + switch (mode) { + case ONE_PT_CALIB: + for (i = 0; i < tmdev->num_sensors; i++) + p1[i] += (base1 << 2) | BIT_APPEND; + break; + case TWO_PT_CALIB: + for (i = 0; i < tmdev->num_sensors; i++) { + p2[i] += base2; + p2[i] <<= 2; + p2[i] |= BIT_APPEND; + } + /* Fall through */ + case ONE_PT_CALIB2: + for (i = 0; i < tmdev->num_sensors; i++) { + p1[i] += base1; + p1[i] <<= 2; + p1[i] |= BIT_APPEND; + } + break; + default: + for (i = 0; i < tmdev->num_sensors; i++) + p2[i] = 780; + p1[0] = 502; + p1[1] = 509; + p1[2] = 503; + p1[3] = 509; + p1[4] = 505; + p1[5] = 509; + p1[6] = 507; + p1[7] = 510; + p1[8] = 508; + p1[9] = 509; + p1[10] = 508; + break; + } + + compute_intercept_slope(tmdev, p1, p2, mode); + + return 0; +} + +static const struct tsens_ops ops_8974 = { + .init = init_common, + .calibrate = calibrate_8974, + .get_temp = get_temp_common, +}; + +const struct tsens_data data_8974 = { + .num_sensors = 11, + .ops = &ops_8974, +}; diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c new file mode 100644 index 000000000..6207d8d92 --- /dev/null +++ b/drivers/thermal/qcom/tsens-common.c @@ -0,0 +1,154 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/nvmem-consumer.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include "tsens.h" + +#define S0_ST_ADDR 0x1030 +#define SN_ADDR_OFFSET 0x4 +#define SN_ST_TEMP_MASK 0x3ff +#define CAL_DEGC_PT1 30 +#define CAL_DEGC_PT2 120 +#define SLOPE_FACTOR 1000 +#define SLOPE_DEFAULT 3200 + +char *qfprom_read(struct device *dev, const char *cname) +{ + struct nvmem_cell *cell; + ssize_t data; + char *ret; + + cell = nvmem_cell_get(dev, cname); + if (IS_ERR(cell)) + return ERR_CAST(cell); + + ret = nvmem_cell_read(cell, &data); + nvmem_cell_put(cell); + + return ret; +} + +/* + * Use this function on devices where slope and offset calculations + * depend on calibration data read from qfprom. On others the slope + * and offset values are derived from tz->tzp->slope and tz->tzp->offset + * resp. + */ +void compute_intercept_slope(struct tsens_device *tmdev, u32 *p1, + u32 *p2, u32 mode) +{ + int i; + int num, den; + + for (i = 0; i < tmdev->num_sensors; i++) { + dev_dbg(tmdev->dev, + "sensor%d - data_point1:%#x data_point2:%#x\n", + i, p1[i], p2[i]); + + tmdev->sensor[i].slope = SLOPE_DEFAULT; + if (mode == TWO_PT_CALIB) { + /* + * slope (m) = adc_code2 - adc_code1 (y2 - y1)/ + * temp_120_degc - temp_30_degc (x2 - x1) + */ + num = p2[i] - p1[i]; + num *= SLOPE_FACTOR; + den = CAL_DEGC_PT2 - CAL_DEGC_PT1; + tmdev->sensor[i].slope = num / den; + } + + tmdev->sensor[i].offset = (p1[i] * SLOPE_FACTOR) - + (CAL_DEGC_PT1 * + tmdev->sensor[i].slope); + dev_dbg(tmdev->dev, "offset:%d\n", tmdev->sensor[i].offset); + } +} + +static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s) +{ + int degc, num, den; + + num = (adc_code * SLOPE_FACTOR) - s->offset; + den = s->slope; + + if (num > 0) + degc = num + (den / 2); + else if (num < 0) + degc = num - (den / 2); + else + degc = num; + + degc /= den; + + return degc; +} + +int get_temp_common(struct tsens_device *tmdev, int id, int *temp) +{ + struct tsens_sensor *s = &tmdev->sensor[id]; + u32 code; + unsigned int status_reg; + int last_temp = 0, ret; + + status_reg = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET; + ret = regmap_read(tmdev->map, status_reg, &code); + if (ret) + return ret; + last_temp = code & SN_ST_TEMP_MASK; + + *temp = code_to_degc(last_temp, s) * 1000; + + return 0; +} + +static const struct regmap_config tsens_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +int __init init_common(struct tsens_device *tmdev) +{ + void __iomem *base; + struct resource *res; + struct platform_device *op = of_find_device_by_node(tmdev->dev->of_node); + + if (!op) + return -EINVAL; + + /* The driver only uses the TM register address space for now */ + if (op->num_resources > 1) { + tmdev->tm_offset = 0; + } else { + /* old DTs where SROT and TM were in a contiguous 2K block */ + tmdev->tm_offset = 0x1000; + } + + res = platform_get_resource(op, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&op->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config); + if (IS_ERR(tmdev->map)) + return PTR_ERR(tmdev->map); + + return 0; +} diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c new file mode 100644 index 000000000..44da02f59 --- /dev/null +++ b/drivers/thermal/qcom/tsens-v2.c @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2018, Linaro Limited + */ + +#include <linux/regmap.h> +#include <linux/bitops.h> +#include "tsens.h" + +#define STATUS_OFFSET 0xa0 +#define LAST_TEMP_MASK 0xfff +#define STATUS_VALID_BIT BIT(21) + +static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp) +{ + struct tsens_sensor *s = &tmdev->sensor[id]; + u32 code; + unsigned int status_reg; + u32 last_temp = 0, last_temp2 = 0, last_temp3 = 0; + int ret; + + status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * 4; + ret = regmap_read(tmdev->map, status_reg, &code); + if (ret) + return ret; + last_temp = code & LAST_TEMP_MASK; + if (code & STATUS_VALID_BIT) + goto done; + + /* Try a second time */ + ret = regmap_read(tmdev->map, status_reg, &code); + if (ret) + return ret; + if (code & STATUS_VALID_BIT) { + last_temp = code & LAST_TEMP_MASK; + goto done; + } else { + last_temp2 = code & LAST_TEMP_MASK; + } + + /* Try a third/last time */ + ret = regmap_read(tmdev->map, status_reg, &code); + if (ret) + return ret; + if (code & STATUS_VALID_BIT) { + last_temp = code & LAST_TEMP_MASK; + goto done; + } else { + last_temp3 = code & LAST_TEMP_MASK; + } + + if (last_temp == last_temp2) + last_temp = last_temp2; + else if (last_temp2 == last_temp3) + last_temp = last_temp3; +done: + /* Convert temperature from deciCelsius to milliCelsius */ + *temp = sign_extend32(last_temp, fls(LAST_TEMP_MASK) - 1) * 100; + + return 0; +} + +static const struct tsens_ops ops_generic_v2 = { + .init = init_common, + .get_temp = get_temp_tsens_v2, +}; + +const struct tsens_data data_tsens_v2 = { + .ops = &ops_generic_v2, +}; + +/* Kept around for backward compatibility with old msm8996.dtsi */ +const struct tsens_data data_8996 = { + .num_sensors = 13, + .ops = &ops_generic_v2, +}; diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c new file mode 100644 index 000000000..b13971328 --- /dev/null +++ b/drivers/thermal/qcom/tsens.c @@ -0,0 +1,210 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/slab.h> +#include <linux/thermal.h> +#include "tsens.h" + +static int tsens_get_temp(void *data, int *temp) +{ + const struct tsens_sensor *s = data; + struct tsens_device *tmdev = s->tmdev; + + return tmdev->ops->get_temp(tmdev, s->id, temp); +} + +static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend) +{ + const struct tsens_sensor *s = p; + struct tsens_device *tmdev = s->tmdev; + + if (tmdev->ops->get_trend) + return tmdev->ops->get_trend(tmdev, s->id, trend); + + return -ENOTSUPP; +} + +static int __maybe_unused tsens_suspend(struct device *dev) +{ + struct tsens_device *tmdev = dev_get_drvdata(dev); + + if (tmdev->ops && tmdev->ops->suspend) + return tmdev->ops->suspend(tmdev); + + return 0; +} + +static int __maybe_unused tsens_resume(struct device *dev) +{ + struct tsens_device *tmdev = dev_get_drvdata(dev); + + if (tmdev->ops && tmdev->ops->resume) + return tmdev->ops->resume(tmdev); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); + +static const struct of_device_id tsens_table[] = { + { + .compatible = "qcom,msm8916-tsens", + .data = &data_8916, + }, { + .compatible = "qcom,msm8974-tsens", + .data = &data_8974, + }, { + .compatible = "qcom,msm8996-tsens", + .data = &data_8996, + }, { + .compatible = "qcom,tsens-v2", + .data = &data_tsens_v2, + }, + {} +}; +MODULE_DEVICE_TABLE(of, tsens_table); + +static const struct thermal_zone_of_device_ops tsens_of_ops = { + .get_temp = tsens_get_temp, + .get_trend = tsens_get_trend, +}; + +static int tsens_register(struct tsens_device *tmdev) +{ + int i; + struct thermal_zone_device *tzd; + u32 *hw_id, n = tmdev->num_sensors; + + hw_id = devm_kcalloc(tmdev->dev, n, sizeof(u32), GFP_KERNEL); + if (!hw_id) + return -ENOMEM; + + for (i = 0; i < tmdev->num_sensors; i++) { + tmdev->sensor[i].tmdev = tmdev; + tmdev->sensor[i].id = i; + tzd = devm_thermal_zone_of_sensor_register(tmdev->dev, i, + &tmdev->sensor[i], + &tsens_of_ops); + if (IS_ERR(tzd)) + continue; + tmdev->sensor[i].tzd = tzd; + if (tmdev->ops->enable) + tmdev->ops->enable(tmdev, i); + } + return 0; +} + +static int tsens_probe(struct platform_device *pdev) +{ + int ret, i; + struct device *dev; + struct device_node *np; + struct tsens_device *tmdev; + const struct tsens_data *data; + const struct of_device_id *id; + u32 num_sensors; + + if (pdev->dev.of_node) + dev = &pdev->dev; + else + dev = pdev->dev.parent; + + np = dev->of_node; + + id = of_match_node(tsens_table, np); + if (id) + data = id->data; + else + data = &data_8960; + + num_sensors = data->num_sensors; + + if (np) + of_property_read_u32(np, "#qcom,sensors", &num_sensors); + + if (num_sensors <= 0) { + dev_err(dev, "invalid number of sensors\n"); + return -EINVAL; + } + + tmdev = devm_kzalloc(dev, + struct_size(tmdev, sensor, num_sensors), + GFP_KERNEL); + if (!tmdev) + return -ENOMEM; + + tmdev->dev = dev; + tmdev->num_sensors = num_sensors; + tmdev->ops = data->ops; + for (i = 0; i < tmdev->num_sensors; i++) { + if (data->hw_ids) + tmdev->sensor[i].hw_id = data->hw_ids[i]; + else + tmdev->sensor[i].hw_id = i; + } + + if (!tmdev->ops || !tmdev->ops->init || !tmdev->ops->get_temp) + return -EINVAL; + + ret = tmdev->ops->init(tmdev); + if (ret < 0) { + dev_err(dev, "tsens init failed\n"); + return ret; + } + + if (tmdev->ops->calibrate) { + ret = tmdev->ops->calibrate(tmdev); + if (ret < 0) { + if (ret != -EPROBE_DEFER) + dev_err(dev, "tsens calibration failed\n"); + return ret; + } + } + + ret = tsens_register(tmdev); + + platform_set_drvdata(pdev, tmdev); + + return ret; +} + +static int tsens_remove(struct platform_device *pdev) +{ + struct tsens_device *tmdev = platform_get_drvdata(pdev); + + if (tmdev->ops->disable) + tmdev->ops->disable(tmdev); + + return 0; +} + +static struct platform_driver tsens_driver = { + .probe = tsens_probe, + .remove = tsens_remove, + .driver = { + .name = "qcom-tsens", + .pm = &tsens_pm_ops, + .of_match_table = tsens_table, + }, +}; +module_platform_driver(tsens_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("QCOM Temperature Sensor driver"); +MODULE_ALIAS("platform:qcom-tsens"); diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h new file mode 100644 index 000000000..14331eb45 --- /dev/null +++ b/drivers/thermal/qcom/tsens.h @@ -0,0 +1,96 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __QCOM_TSENS_H__ +#define __QCOM_TSENS_H__ + +#define ONE_PT_CALIB 0x1 +#define ONE_PT_CALIB2 0x2 +#define TWO_PT_CALIB 0x3 + +#include <linux/thermal.h> + +struct tsens_device; + +struct tsens_sensor { + struct tsens_device *tmdev; + struct thermal_zone_device *tzd; + int offset; + int id; + int hw_id; + int slope; + u32 status; +}; + +/** + * struct tsens_ops - operations as supported by the tsens device + * @init: Function to initialize the tsens device + * @calibrate: Function to calibrate the tsens device + * @get_temp: Function which returns the temp in millidegC + * @enable: Function to enable (clocks/power) tsens device + * @disable: Function to disable the tsens device + * @suspend: Function to suspend the tsens device + * @resume: Function to resume the tsens device + * @get_trend: Function to get the thermal/temp trend + */ +struct tsens_ops { + /* mandatory callbacks */ + int (*init)(struct tsens_device *); + int (*calibrate)(struct tsens_device *); + int (*get_temp)(struct tsens_device *, int, int *); + /* optional callbacks */ + int (*enable)(struct tsens_device *, int); + void (*disable)(struct tsens_device *); + int (*suspend)(struct tsens_device *); + int (*resume)(struct tsens_device *); + int (*get_trend)(struct tsens_device *, int, enum thermal_trend *); +}; + +/** + * struct tsens_data - tsens instance specific data + * @num_sensors: Max number of sensors supported by platform + * @ops: operations the tsens instance supports + * @hw_ids: Subset of sensors ids supported by platform, if not the first n + */ +struct tsens_data { + const u32 num_sensors; + const struct tsens_ops *ops; + unsigned int *hw_ids; +}; + +/* Registers to be saved/restored across a context loss */ +struct tsens_context { + int threshold; + int control; +}; + +struct tsens_device { + struct device *dev; + u32 num_sensors; + struct regmap *map; + u32 tm_offset; + struct tsens_context ctx; + const struct tsens_ops *ops; + struct tsens_sensor sensor[0]; +}; + +char *qfprom_read(struct device *, const char *); +void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32); +int init_common(struct tsens_device *); +int get_temp_common(struct tsens_device *, int, int *); + +/* TSENS v1 targets */ +extern const struct tsens_data data_8916, data_8974, data_8960; +/* TSENS v2 targets */ +extern const struct tsens_data data_8996, data_tsens_v2; + +#endif /* __QCOM_TSENS_H__ */ |