Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 184 insertions, 0 deletions

diff --git a/drivers/video/fbdev/geode/display_gx.c b/drivers/video/fbdev/geode/display_gx.c
new file mode 100644
index 000000000..f0af911a0
--- /dev/null
+++ b/drivers/video/fbdev/geode/display_gx.c
@@ -0,0 +1,184 @@
+/*
+ * Geode GX display controller.
+ *
+ *   Copyright (C) 2005 Arcom Control Systems Ltd.
+ *
+ *   Portions from AMD's original 2.4 driver:
+ *     Copyright (C) 2004 Advanced Micro Devices, Inc.
+ *
+ *   This program is free software; you can redistribute it and/or modify it
+ *   under the terms of the GNU General Public License as published by * the
+ *   Free Software Foundation; either version 2 of the License, or * (at your
+ *   option) any later version.
+ */
+#include <linux/spinlock.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/div64.h>
+#include <asm/delay.h>
+#include <linux/cs5535.h>
+
+#include "gxfb.h"
+
+unsigned int gx_frame_buffer_size(void)
+{
+	unsigned int val;
+
+	if (!cs5535_has_vsa2()) {
+		uint32_t hi, lo;
+
+		/* The number of pages is (PMAX - PMIN)+1 */
+		rdmsr(MSR_GLIU_P2D_RO0, lo, hi);
+
+		/* PMAX */
+		val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);
+		/* PMIN */
+		val -= (lo & 0x000fffff);
+		val += 1;
+
+		/* The page size is 4k */
+		return (val << 12);
+	}
+
+	/* FB size can be obtained from the VSA II */
+	/* Virtual register class = 0x02 */
+	/* VG_MEM_SIZE(512Kb units) = 0x00 */
+
+	outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
+	outw(VSA_VR_MEM_SIZE, VSA_VRC_INDEX);
+
+	val = (unsigned int)(inw(VSA_VRC_DATA)) & 0xFFl;
+	return (val << 19);
+}
+
+int gx_line_delta(int xres, int bpp)
+{
+	/* Must be a multiple of 8 bytes. */
+	return (xres * (bpp >> 3) + 7) & ~0x7;
+}
+
+void gx_set_mode(struct fb_info *info)
+{
+	struct gxfb_par *par = info->par;
+	u32 gcfg, dcfg;
+	int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
+	int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
+
+	/* Unlock the display controller registers. */
+	write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK);
+
+	gcfg = read_dc(par, DC_GENERAL_CFG);
+	dcfg = read_dc(par, DC_DISPLAY_CFG);
+
+	/* Disable the timing generator. */
+	dcfg &= ~DC_DISPLAY_CFG_TGEN;
+	write_dc(par, DC_DISPLAY_CFG, dcfg);
+
+	/* Wait for pending memory requests before disabling the FIFO load. */
+	udelay(100);
+
+	/* Disable FIFO load and compression. */
+	gcfg &= ~(DC_GENERAL_CFG_DFLE | DC_GENERAL_CFG_CMPE |
+			DC_GENERAL_CFG_DECE);
+	write_dc(par, DC_GENERAL_CFG, gcfg);
+
+	/* Setup DCLK and its divisor. */
+	gx_set_dclk_frequency(info);
+
+	/*
+	 * Setup new mode.
+	 */
+
+	/* Clear all unused feature bits. */
+	gcfg &= DC_GENERAL_CFG_YUVM | DC_GENERAL_CFG_VDSE;
+	dcfg = 0;
+
+	/* Set FIFO priority (default 6/5) and enable. */
+	/* FIXME: increase fifo priority for 1280x1024 and higher modes? */
+	gcfg |= (6 << DC_GENERAL_CFG_DFHPEL_SHIFT) |
+		(5 << DC_GENERAL_CFG_DFHPSL_SHIFT) | DC_GENERAL_CFG_DFLE;
+
+	/* Framebuffer start offset. */
+	write_dc(par, DC_FB_ST_OFFSET, 0);
+
+	/* Line delta and line buffer length. */
+	write_dc(par, DC_GFX_PITCH, info->fix.line_length >> 3);
+	write_dc(par, DC_LINE_SIZE,
+		((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2);
+
+
+	/* Enable graphics and video data and unmask address lines. */
+	dcfg |= DC_DISPLAY_CFG_GDEN | DC_DISPLAY_CFG_VDEN |
+		DC_DISPLAY_CFG_A20M | DC_DISPLAY_CFG_A18M;
+
+	/* Set pixel format. */
+	switch (info->var.bits_per_pixel) {
+	case 8:
+		dcfg |= DC_DISPLAY_CFG_DISP_MODE_8BPP;
+		break;
+	case 16:
+		dcfg |= DC_DISPLAY_CFG_DISP_MODE_16BPP;
+		break;
+	case 32:
+		dcfg |= DC_DISPLAY_CFG_DISP_MODE_24BPP;
+		dcfg |= DC_DISPLAY_CFG_PALB;
+		break;
+	}
+
+	/* Enable timing generator. */
+	dcfg |= DC_DISPLAY_CFG_TGEN;
+
+	/* Horizontal and vertical timings. */
+	hactive = info->var.xres;
+	hblankstart = hactive;
+	hsyncstart = hblankstart + info->var.right_margin;
+	hsyncend =  hsyncstart + info->var.hsync_len;
+	hblankend = hsyncend + info->var.left_margin;
+	htotal = hblankend;
+
+	vactive = info->var.yres;
+	vblankstart = vactive;
+	vsyncstart = vblankstart + info->var.lower_margin;
+	vsyncend =  vsyncstart + info->var.vsync_len;
+	vblankend = vsyncend + info->var.upper_margin;
+	vtotal = vblankend;
+
+	write_dc(par, DC_H_ACTIVE_TIMING, (hactive - 1)    |
+			((htotal - 1) << 16));
+	write_dc(par, DC_H_BLANK_TIMING, (hblankstart - 1) |
+			((hblankend - 1) << 16));
+	write_dc(par, DC_H_SYNC_TIMING, (hsyncstart - 1)   |
+			((hsyncend - 1) << 16));
+
+	write_dc(par, DC_V_ACTIVE_TIMING, (vactive - 1)    |
+			((vtotal - 1) << 16));
+	write_dc(par, DC_V_BLANK_TIMING, (vblankstart - 1) |
+			((vblankend - 1) << 16));
+	write_dc(par, DC_V_SYNC_TIMING, (vsyncstart - 1)   |
+			((vsyncend - 1) << 16));
+
+	/* Write final register values. */
+	write_dc(par, DC_DISPLAY_CFG, dcfg);
+	write_dc(par, DC_GENERAL_CFG, gcfg);
+
+	gx_configure_display(info);
+
+	/* Relock display controller registers */
+	write_dc(par, DC_UNLOCK, DC_UNLOCK_LOCK);
+}
+
+void gx_set_hw_palette_reg(struct fb_info *info, unsigned regno,
+		unsigned red, unsigned green, unsigned blue)
+{
+	struct gxfb_par *par = info->par;
+	int val;
+
+	/* Hardware palette is in RGB 8-8-8 format. */
+	val  = (red   << 8) & 0xff0000;
+	val |= (green)      & 0x00ff00;
+	val |= (blue  >> 8) & 0x0000ff;
+
+	write_dc(par, DC_PAL_ADDRESS, regno);
+	write_dc(par, DC_PAL_DATA, val);
+}