Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

172 files changed, 58487 insertions, 0 deletions

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
new file mode 100644
index 000000000..92fdc7dc2
--- /dev/null
+++ b/drivers/watchdog/Kconfig
@@ -0,0 +1,2018 @@
+
+#
+# Watchdog device configuration
+#
+
+menuconfig WATCHDOG
+	bool "Watchdog Timer Support"
+	---help---
+	  If you say Y here (and to one of the following options) and create a
+	  character special file /dev/watchdog with major number 10 and minor
+	  number 130 using mknod ("man mknod"), you will get a watchdog, i.e.:
+	  subsequently opening the file and then failing to write to it for
+	  longer than 1 minute will result in rebooting the machine. This
+	  could be useful for a networked machine that needs to come back
+	  on-line as fast as possible after a lock-up. There's both a watchdog
+	  implementation entirely in software (which can sometimes fail to
+	  reboot the machine) and a driver for hardware watchdog boards, which
+	  are more robust and can also keep track of the temperature inside
+	  your computer. For details, read
+	  <file:Documentation/watchdog/watchdog-api.txt> in the kernel source.
+
+	  The watchdog is usually used together with the watchdog daemon
+	  which is available from
+	  <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can
+	  also monitor NFS connections and can reboot the machine when the process
+	  table is full.
+
+	  If unsure, say N.
+
+if WATCHDOG
+
+config WATCHDOG_CORE
+	bool "WatchDog Timer Driver Core"
+	---help---
+	  Say Y here if you want to use the new watchdog timer driver core.
+	  This driver provides a framework for all watchdog timer drivers
+	  and gives them the /dev/watchdog interface (and later also the
+	  sysfs interface).
+
+config WATCHDOG_NOWAYOUT
+	bool "Disable watchdog shutdown on close"
+	help
+	  The default watchdog behaviour (which you get if you say N here) is
+	  to stop the timer if the process managing it closes the file
+	  /dev/watchdog. It's always remotely possible that this process might
+	  get killed. If you say Y here, the watchdog cannot be stopped once
+	  it has been started.
+
+config WATCHDOG_HANDLE_BOOT_ENABLED
+	bool "Update boot-enabled watchdog until userspace takes over"
+	default y
+	help
+	  The default watchdog behaviour (which you get if you say Y here) is
+	  to ping watchdog devices that were enabled before the driver has
+	  been loaded until control is taken over from userspace using the
+	  /dev/watchdog file. If you say N here, the kernel will not update
+	  the watchdog on its own. Thus if your userspace does not start fast
+	  enough your device will reboot.
+
+config WATCHDOG_SYSFS
+	bool "Read different watchdog information through sysfs"
+	help
+	  Say Y here if you want to enable watchdog device status read through
+	  sysfs attributes.
+
+#
+# General Watchdog drivers
+#
+
+comment "Watchdog Device Drivers"
+
+# Architecture Independent
+
+config SOFT_WATCHDOG
+	tristate "Software watchdog"
+	select WATCHDOG_CORE
+	help
+	  A software monitoring watchdog. This will fail to reboot your system
+	  from some situations that the hardware watchdog will recover
+	  from. Equally it's a lot cheaper to install.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called softdog.
+
+config SOFT_WATCHDOG_PRETIMEOUT
+	bool "Software watchdog pretimeout governor support"
+	depends on SOFT_WATCHDOG && WATCHDOG_PRETIMEOUT_GOV
+	help
+	  Enable this if you want to use pretimeout governors with the software
+	  watchdog. Be aware that governors might affect the watchdog because it
+	  is purely software, e.g. the panic governor will stall it!
+
+config DA9052_WATCHDOG
+	tristate "Dialog DA9052 Watchdog"
+	depends on PMIC_DA9052 || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Support for the watchdog in the DA9052 PMIC. Watchdog trigger
+	  cause system reset.
+
+	  Say Y here to include support for the DA9052 watchdog.
+	  Alternatively say M to compile the driver as a module,
+	  which will be called da9052_wdt.
+
+config DA9055_WATCHDOG
+	tristate "Dialog Semiconductor DA9055 Watchdog"
+	depends on MFD_DA9055 || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  If you say yes here you get support for watchdog on the Dialog
+	  Semiconductor DA9055 PMIC.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called da9055_wdt.
+
+config DA9063_WATCHDOG
+	tristate "Dialog DA9063 Watchdog"
+	depends on MFD_DA9063 || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Support for the watchdog in the DA9063 PMIC.
+
+	  This driver can be built as a module. The module name is da9063_wdt.
+
+config DA9062_WATCHDOG
+	tristate "Dialog DA9062/61 Watchdog"
+	depends on MFD_DA9062 || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Support for the watchdog in the DA9062 and DA9061 PMICs.
+
+	  This driver can be built as a module. The module name is da9062_wdt.
+
+config GPIO_WATCHDOG
+	tristate "Watchdog device controlled through GPIO-line"
+	depends on OF_GPIO
+	select WATCHDOG_CORE
+	help
+	  If you say yes here you get support for watchdog device
+	  controlled through GPIO-line.
+
+config GPIO_WATCHDOG_ARCH_INITCALL
+	bool "Register the watchdog as early as possible"
+	depends on GPIO_WATCHDOG=y
+	help
+	  In some situations, the default initcall level (module_init)
+	  in not early enough in the boot process to avoid the watchdog
+	  to be triggered.
+	  If you say yes here, the initcall level would be raised to
+	  arch_initcall.
+	  If in doubt, say N.
+
+config MENF21BMC_WATCHDOG
+	tristate "MEN 14F021P00 BMC Watchdog"
+	depends on MFD_MENF21BMC || COMPILE_TEST
+	depends on I2C
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support for the MEN 14F021P00 BMC Watchdog.
+
+	  This driver can also be built as a module. If so the module
+	  will be called menf21bmc_wdt.
+
+config MENZ069_WATCHDOG
+	tristate "MEN 16Z069 Watchdog"
+	depends on MCB
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support for the MEN 16Z069 Watchdog.
+
+	  This driver can also be built as a module. If so the module
+	  will be called menz069_wdt.
+
+config TANGOX_WATCHDOG
+	tristate "Sigma Designs SMP86xx/SMP87xx watchdog"
+	select WATCHDOG_CORE
+	depends on ARCH_TANGO || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Support for the watchdog in Sigma Designs SMP86xx (tango3)
+	  and SMP87xx (tango4) family chips.
+
+	  This driver can be built as a module. The module name is tangox_wdt.
+
+config WDAT_WDT
+	tristate "ACPI Watchdog Action Table (WDAT)"
+	depends on ACPI
+	select WATCHDOG_CORE
+	select ACPI_WATCHDOG
+	help
+	  This driver adds support for systems with ACPI Watchdog Action
+	  Table (WDAT) table. Servers typically have this but it can be
+	  found on some desktop machines as well. This driver will take
+	  over the native iTCO watchdog driver found on many Intel CPUs.
+
+	  To compile this driver as module, choose M here: the module will
+	  be called wdat_wdt.
+
+config WM831X_WATCHDOG
+	tristate "WM831x watchdog"
+	depends on MFD_WM831X
+	select WATCHDOG_CORE
+	help
+	  Support for the watchdog in the WM831x AudioPlus PMICs.  When
+	  the watchdog triggers the system will be reset.
+
+config WM8350_WATCHDOG
+	tristate "WM8350 watchdog"
+	depends on MFD_WM8350
+	select WATCHDOG_CORE
+	help
+	  Support for the watchdog in the WM8350 AudioPlus PMIC.  When
+	  the watchdog triggers the system will be reset.
+
+config XILINX_WATCHDOG
+	tristate "Xilinx Watchdog timer"
+	depends on HAS_IOMEM
+	select WATCHDOG_CORE
+	help
+	  Watchdog driver for the xps_timebase_wdt ip core.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called of_xilinx_wdt.
+
+config ZIIRAVE_WATCHDOG
+	tristate "Zodiac RAVE Watchdog Timer"
+	depends on I2C
+	select WATCHDOG_CORE
+	help
+	  Watchdog driver for the Zodiac Aerospace RAVE Switch Watchdog
+	  Processor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ziirave_wdt.
+
+config RAVE_SP_WATCHDOG
+	tristate "RAVE SP Watchdog timer"
+	depends on RAVE_SP_CORE
+	depends on NVMEM || !NVMEM
+	select WATCHDOG_CORE
+	help
+	  Support for the watchdog on RAVE SP device.
+
+# ALPHA Architecture
+
+# ARM Architecture
+
+config ARM_SP805_WATCHDOG
+	tristate "ARM SP805 Watchdog"
+	depends on (ARM || ARM64 || COMPILE_TEST) && ARM_AMBA
+	select WATCHDOG_CORE
+	help
+	  ARM Primecell SP805 Watchdog timer. This will reboot your system when
+	  the timeout is reached.
+
+config ARM_SBSA_WATCHDOG
+	tristate "ARM SBSA Generic Watchdog"
+	depends on ARM64
+	depends on ARM_ARCH_TIMER
+	select WATCHDOG_CORE
+	help
+	  ARM SBSA Generic Watchdog has two stage timeouts:
+	  the first signal (WS0) is for alerting the system by interrupt,
+	  the second one (WS1) is a real hardware reset.
+	  More details: ARM DEN0029B - Server Base System Architecture (SBSA)
+
+	  This driver can operate ARM SBSA Generic Watchdog as a single stage
+	  or a two stages watchdog, it depends on the module parameter "action".
+
+	  Note: the maximum timeout in the two stages mode is half of that in
+	  the single stage mode.
+
+	  To compile this driver as module, choose M here: The module
+	  will be called sbsa_gwdt.
+
+config ASM9260_WATCHDOG
+	tristate "Alphascale ASM9260 watchdog"
+	depends on MACH_ASM9260 || COMPILE_TEST
+	depends on OF
+	select WATCHDOG_CORE
+	select RESET_CONTROLLER
+	help
+	  Watchdog timer embedded into Alphascale asm9260 chips. This will reboot your
+	  system when the timeout is reached.
+
+config AT91RM9200_WATCHDOG
+	tristate "AT91RM9200 watchdog"
+	depends on (SOC_AT91RM9200 && MFD_SYSCON) || COMPILE_TEST
+	help
+	  Watchdog timer embedded into AT91RM9200 chips. This will reboot your
+	  system when the timeout is reached.
+
+config AT91SAM9X_WATCHDOG
+	tristate "AT91SAM9X / AT91CAP9 watchdog"
+	depends on ARCH_AT91 || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
+	  reboot your system when the timeout is reached.
+
+config SAMA5D4_WATCHDOG
+	tristate "Atmel SAMA5D4 Watchdog Timer"
+	depends on ARCH_AT91 || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Atmel SAMA5D4 watchdog timer is embedded into SAMA5D4 chips.
+	  Its Watchdog Timer Mode Register can be written more than once.
+	  This will reboot your system when the timeout is reached.
+
+config CADENCE_WATCHDOG
+	tristate "Cadence Watchdog Timer"
+	depends on HAS_IOMEM
+	select WATCHDOG_CORE
+	help
+	  Say Y here if you want to include support for the watchdog
+	  timer in the Xilinx Zynq.
+
+config 21285_WATCHDOG
+	tristate "DC21285 watchdog"
+	depends on FOOTBRIDGE
+	help
+	  The Intel Footbridge chip contains a built-in watchdog circuit. Say Y
+	  here if you wish to use this. Alternatively say M to compile the
+	  driver as a module, which will be called wdt285.
+
+	  This driver does not work on all machines. In particular, early CATS
+	  boards have hardware problems that will cause the machine to simply
+	  lock up if the watchdog fires.
+
+	  "If in doubt, leave it out" - say N.
+
+config 977_WATCHDOG
+	tristate "NetWinder WB83C977 watchdog"
+	depends on (FOOTBRIDGE && ARCH_NETWINDER) || (ARM && COMPILE_TEST)
+	help
+	  Say Y here to include support for the WB977 watchdog included in
+	  NetWinder machines. Alternatively say M to compile the driver as
+	  a module, which will be called wdt977.
+
+	  Not sure? It's safe to say N.
+
+config FTWDT010_WATCHDOG
+	tristate "Faraday Technology FTWDT010 watchdog"
+	depends on ARM || COMPILE_TEST
+	select WATCHDOG_CORE
+	default ARCH_GEMINI
+	help
+	  Say Y here if to include support for the Faraday Technology
+	  FTWDT010 watchdog timer embedded in the Cortina Systems Gemini
+	  family of devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ftwdt010_wdt.
+
+config IXP4XX_WATCHDOG
+	tristate "IXP4xx Watchdog"
+	depends on ARCH_IXP4XX
+	help
+	  Say Y here if to include support for the watchdog timer
+	  in the Intel IXP4xx network processors. This driver can
+	  be built as a module by choosing M. The module will
+	  be called ixp4xx_wdt.
+
+	  Note: The internal IXP4xx watchdog does a soft CPU reset
+	  which doesn't reset any peripherals. There are circumstances
+	  where the watchdog will fail to reset the board correctly
+	  (e.g., if the boot ROM is in an unreadable state).
+
+	  Say N if you are unsure.
+
+config KS8695_WATCHDOG
+	tristate "KS8695 watchdog"
+	depends on ARCH_KS8695
+	help
+	  Watchdog timer embedded into KS8695 processor. This will reboot your
+	  system when the timeout is reached.
+
+config HAVE_S3C2410_WATCHDOG
+	bool
+	help
+	  This will include watchdog timer support for Samsung SoCs. If
+	  you want to include watchdog support for any machine, kindly
+	  select this in the respective mach-XXXX/Kconfig file.
+
+config S3C2410_WATCHDOG
+	tristate "S3C2410 Watchdog"
+	depends on HAVE_S3C2410_WATCHDOG || COMPILE_TEST
+	select WATCHDOG_CORE
+	select MFD_SYSCON if ARCH_EXYNOS
+	help
+	  Watchdog timer block in the Samsung SoCs. This will reboot
+	  the system when the timer expires with the watchdog enabled.
+
+	  The driver is limited by the speed of the system's PCLK
+	  signal, so with reasonably fast systems (PCLK around 50-66MHz)
+	  then watchdog intervals of over approximately 20seconds are
+	  unavailable.
+
+	  The driver can be built as a module by choosing M, and will
+	  be called s3c2410_wdt
+
+config SA1100_WATCHDOG
+	tristate "SA1100/PXA2xx watchdog"
+	depends on ARCH_SA1100 || ARCH_PXA
+	help
+	  Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
+	  reboot your system when timeout is reached.
+
+	  NOTE: once enabled, this timer cannot be disabled.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sa1100_wdt.
+
+config DW_WATCHDOG
+	tristate "Synopsys DesignWare watchdog"
+	depends on HAS_IOMEM
+	select WATCHDOG_CORE
+	help
+	  Say Y here if to include support for the Synopsys DesignWare
+	  watchdog timer found in many chips.
+	  To compile this driver as a module, choose M here: the
+	  module will be called dw_wdt.
+
+config EP93XX_WATCHDOG
+	tristate "EP93xx Watchdog"
+	depends on ARCH_EP93XX || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Say Y here if to include support for the watchdog timer
+	  embedded in the Cirrus Logic EP93xx family of devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ep93xx_wdt.
+
+config OMAP_WATCHDOG
+	tristate "OMAP Watchdog"
+	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog.  Say 'Y'
+	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
+
+config PNX4008_WATCHDOG
+	tristate "LPC32XX Watchdog"
+	depends on ARCH_LPC32XX
+	select WATCHDOG_CORE
+	help
+	  Say Y here if to include support for the watchdog timer
+	  in the LPC32XX processor.
+	  This driver can be built as a module by choosing M. The module
+	  will be called pnx4008_wdt.
+
+	  Say N if you are unsure.
+
+config IOP_WATCHDOG
+	tristate "IOP Watchdog"
+	depends on ARCH_IOP13XX
+	select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X)
+	help
+	  Say Y here if to include support for the watchdog timer
+	  in the Intel IOP3XX & IOP13XX I/O Processors.  This driver can
+	  be built as a module by choosing M. The module will
+	  be called iop_wdt.
+
+	  Note: The IOP13XX watchdog does an Internal Bus Reset which will
+	  affect both cores and the peripherals of the IOP.  The ATU-X
+	  and/or ATUe configuration registers will remain intact, but if
+	  operating as an Root Complex and/or Central Resource, the PCI-X
+	  and/or PCIe busses will also be reset.  THIS IS A VERY BIG HAMMER.
+
+config DAVINCI_WATCHDOG
+	tristate "DaVinci watchdog"
+	depends on ARCH_DAVINCI || ARCH_KEYSTONE || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Say Y here if to include support for the watchdog timer
+	  in the DaVinci DM644x/DM646x or Keystone processors.
+	  To compile this driver as a module, choose M here: the
+	  module will be called davinci_wdt.
+
+	  NOTE: once enabled, this timer cannot be disabled.
+	  Say N if you are unsure.
+
+config ORION_WATCHDOG
+	tristate "Orion watchdog"
+	depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || (COMPILE_TEST && !ARCH_EBSA110)
+	depends on ARM
+	select WATCHDOG_CORE
+	help
+	  Say Y here if to include support for the watchdog timer
+	  in the Marvell Orion5x and Kirkwood ARM SoCs.
+	  To compile this driver as a module, choose M here: the
+	  module will be called orion_wdt.
+
+config RN5T618_WATCHDOG
+	tristate "Ricoh RN5T618 watchdog"
+	depends on MFD_RN5T618 || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  If you say yes here you get support for watchdog on the Ricoh
+	  RN5T618 PMIC.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called rn5t618_wdt.
+
+config SUNXI_WATCHDOG
+	tristate "Allwinner SoCs watchdog support"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support for the watchdog timer
+	  in Allwinner SoCs.
+	  To compile this driver as a module, choose M here: the
+	  module will be called sunxi_wdt.
+
+config COH901327_WATCHDOG
+	bool "ST-Ericsson COH 901 327 watchdog"
+	depends on ARCH_U300 || (ARM && COMMON_CLK && COMPILE_TEST)
+	default y if MACH_U300
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include Watchdog timer support for the
+	  watchdog embedded into the ST-Ericsson U300 series platforms.
+	  This watchdog is used to reset the system and thus cannot be
+	  compiled as a module.
+
+config NPCM7XX_WATCHDOG
+	bool "Nuvoton NPCM750 watchdog"
+	depends on ARCH_NPCM || COMPILE_TEST
+	default y if ARCH_NPCM750
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include Watchdog timer support for the
+	  watchdog embedded into the NPCM7xx.
+	  This watchdog is used to reset the system and thus cannot be
+	  compiled as a module.
+
+config TWL4030_WATCHDOG
+	tristate "TWL4030 Watchdog"
+	depends on TWL4030_CORE
+	select WATCHDOG_CORE
+	help
+	  Support for TI TWL4030 watchdog.  Say 'Y' here to enable the
+	  watchdog timer support for TWL4030 chips.
+
+config STMP3XXX_RTC_WATCHDOG
+	tristate "Freescale STMP3XXX & i.MX23/28 watchdog"
+	depends on RTC_DRV_STMP || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support for the watchdog timer inside
+	  the RTC for the STMP37XX/378X or i.MX23/28 SoC.
+	  To compile this driver as a module, choose M here: the
+	  module will be called stmp3xxx_rtc_wdt.
+
+config NUC900_WATCHDOG
+	tristate "Nuvoton NUC900 watchdog"
+	depends on ARCH_W90X900 || COMPILE_TEST
+	help
+	  Say Y here if to include support for the watchdog timer
+	  for the Nuvoton NUC900 series SoCs.
+	  To compile this driver as a module, choose M here: the
+	  module will be called nuc900_wdt.
+
+config TS4800_WATCHDOG
+	tristate "TS-4800 Watchdog"
+	depends on HAS_IOMEM && OF
+	depends on SOC_IMX51 || COMPILE_TEST
+	select WATCHDOG_CORE
+	select MFD_SYSCON
+	help
+	  Technologic Systems TS-4800 has watchdog timer implemented in
+	  an external FPGA. Say Y here if you want to support for the
+	  watchdog timer on TS-4800 board.
+
+config TS72XX_WATCHDOG
+	tristate "TS-72XX SBC Watchdog"
+	depends on MACH_TS72XX || COMPILE_TEST
+	help
+	  Technologic Systems TS-7200, TS-7250 and TS-7260 boards have
+	  watchdog timer implemented in a external CPLD chip. Say Y here
+	  if you want to support for the watchdog timer on TS-72XX boards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ts72xx_wdt.
+
+config MAX63XX_WATCHDOG
+	tristate "Max63xx watchdog"
+	depends on HAS_IOMEM
+	select WATCHDOG_CORE
+	help
+	  Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
+
+config MAX77620_WATCHDOG
+	tristate "Maxim Max77620 Watchdog Timer"
+	depends on MFD_MAX77620 || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	 This is the driver for the Max77620 watchdog timer.
+	 Say 'Y' here to enable the watchdog timer support for
+	 MAX77620 chips. To compile this driver as a module,
+	 choose M here: the module will be called max77620_wdt.
+
+config IMX2_WDT
+	tristate "IMX2+ Watchdog"
+	depends on ARCH_MXC || ARCH_LAYERSCAPE || COMPILE_TEST
+	select REGMAP_MMIO
+	select WATCHDOG_CORE
+	help
+	  This is the driver for the hardware watchdog
+	  on the Freescale IMX2 and later processors.
+	  If you have one of these processors and wish to have
+	  watchdog support enabled, say Y, otherwise say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called imx2_wdt.
+
+config UX500_WATCHDOG
+	tristate "ST-Ericsson Ux500 watchdog"
+	depends on MFD_DB8500_PRCMU
+	select WATCHDOG_CORE
+	default y
+	help
+	  Say Y here to include Watchdog timer support for the watchdog
+	  existing in the prcmu of ST-Ericsson Ux500 series platforms.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ux500_wdt.
+
+config RETU_WATCHDOG
+	tristate "Retu watchdog"
+	depends on MFD_RETU
+	select WATCHDOG_CORE
+	help
+	  Retu watchdog driver for Nokia Internet Tablets (770, N800,
+	  N810). At least on N800 the watchdog cannot be disabled, so
+	  this driver is essential and you should enable it.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called retu_wdt.
+
+config MOXART_WDT
+	tristate "MOXART watchdog"
+	depends on ARCH_MOXART || COMPILE_TEST
+	help
+	  Say Y here to include Watchdog timer support for the watchdog
+	  existing on the MOXA ART SoC series platforms.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called moxart_wdt.
+
+config SIRFSOC_WATCHDOG
+	tristate "SiRFSOC watchdog"
+	depends on HAS_IOMEM
+	depends on ARCH_SIRF || COMPILE_TEST
+	select WATCHDOG_CORE
+	default y
+	help
+	  Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When
+	  the watchdog triggers the system will be reset.
+
+config ST_LPC_WATCHDOG
+	tristate "STMicroelectronics LPC Watchdog"
+	depends on ARCH_STI || COMPILE_TEST
+	depends on OF
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include STMicroelectronics Low Power Controller
+	  (LPC) based Watchdog timer support.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called st_lpc_wdt.
+
+config TEGRA_WATCHDOG
+	tristate "Tegra watchdog"
+	depends on (ARCH_TEGRA || COMPILE_TEST) && HAS_IOMEM
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support for the watchdog timer
+	  embedded in NVIDIA Tegra SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tegra_wdt.
+
+config QCOM_WDT
+	tristate "QCOM watchdog"
+	depends on HAS_IOMEM
+	depends on ARCH_QCOM || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include Watchdog timer support for the watchdog found
+	  on QCOM chipsets.  Currently supported targets are the MSM8960,
+	  APQ8064, and IPQ8064.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called qcom_wdt.
+
+config MESON_GXBB_WATCHDOG
+	tristate "Amlogic Meson GXBB SoCs watchdog support"
+	depends on ARCH_MESON || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support for the watchdog timer
+	  in Amlogic Meson GXBB SoCs.
+	  To compile this driver as a module, choose M here: the
+	  module will be called meson_gxbb_wdt.
+
+config MESON_WATCHDOG
+	tristate "Amlogic Meson SoCs watchdog support"
+	depends on ARCH_MESON || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support for the watchdog timer
+	  in Amlogic Meson SoCs.
+	  To compile this driver as a module, choose M here: the
+	  module will be called meson_wdt.
+
+config MEDIATEK_WATCHDOG
+	tristate "Mediatek SoCs watchdog support"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support for the watchdog timer
+	  in Mediatek SoCs.
+	  To compile this driver as a module, choose M here: the
+	  module will be called mtk_wdt.
+
+config DIGICOLOR_WATCHDOG
+	tristate "Conexant Digicolor SoCs watchdog support"
+	depends on ARCH_DIGICOLOR || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support for the watchdog timer
+	  in Conexant Digicolor SoCs.
+	  To compile this driver as a module, choose M here: the
+	  module will be called digicolor_wdt.
+
+config LPC18XX_WATCHDOG
+	tristate "LPC18xx/43xx Watchdog"
+	depends on ARCH_LPC18XX || COMPILE_TEST
+	depends on HAS_IOMEM
+	select WATCHDOG_CORE
+	help
+	  Say Y here if to include support for the watchdog timer
+	  in NXP LPC SoCs family, which includes LPC18xx/LPC43xx
+	  processors.
+	  To compile this driver as a module, choose M here: the
+	  module will be called lpc18xx_wdt.
+
+config ATLAS7_WATCHDOG
+	tristate "CSRatlas7 watchdog"
+	depends on ARCH_ATLAS7 || COMPILE_TEST
+	help
+	  Say Y here to include Watchdog timer support for the watchdog
+	  existing on the CSRatlas7 series platforms.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called atlas7_wdt.
+
+config RENESAS_WDT
+	tristate "Renesas WDT Watchdog"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  This driver adds watchdog support for the integrated watchdogs in the
+	  Renesas R-Car and other SH-Mobile SoCs (usually named RWDT or SWDT).
+
+config RENESAS_RZAWDT
+	tristate "Renesas RZ/A WDT Watchdog"
+	depends on ARCH_RENESAS || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  This driver adds watchdog support for the integrated watchdogs in the
+	  Renesas RZ/A SoCs. These watchdogs can be used to reset a system.
+
+config ASPEED_WATCHDOG
+	tristate "Aspeed BMC watchdog support"
+	depends on ARCH_ASPEED || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support for the watchdog timer
+	  in Aspeed BMC SoCs.
+
+	  This driver is required to reboot the SoC.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called aspeed_wdt.
+
+config ZX2967_WATCHDOG
+	tristate "ZTE zx2967 SoCs watchdog support"
+	depends on ARCH_ZX
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support for the watchdog timer
+	  in ZTE zx2967 SoCs.
+	  To compile this driver as a module, choose M here: the
+	  module will be called zx2967_wdt.
+
+config STM32_WATCHDOG
+	tristate "STM32 Independent WatchDoG (IWDG) support"
+	depends on ARCH_STM32
+	select WATCHDOG_CORE
+	default y
+	help
+	  Say Y here to include support for the watchdog timer
+	  in stm32 SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stm32_iwdg.
+
+config UNIPHIER_WATCHDOG
+	tristate "UniPhier watchdog support"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on OF && MFD_SYSCON
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support watchdog timer embedded
+	  into the UniPhier system.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called uniphier_wdt.
+
+config RTD119X_WATCHDOG
+	bool "Realtek RTD119x/RTD129x watchdog support"
+	depends on ARCH_REALTEK || COMPILE_TEST
+	depends on OF
+	select WATCHDOG_CORE
+	default ARCH_REALTEK
+	help
+	  Say Y here to include support for the watchdog timer in
+	  Realtek RTD1295 SoCs.
+
+config SPRD_WATCHDOG
+	tristate "Spreadtrum watchdog support"
+	depends on ARCH_SPRD || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include watchdog timer supported
+	  by Spreadtrum system.
+
+# X86 (i386 + ia64 + x86_64) Architecture
+
+config ACQUIRE_WDT
+	tristate "Acquire SBC Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog on Single Board
+	  Computers produced by Acquire Inc (and others). This watchdog
+	  simply watches your kernel to make sure it doesn't freeze, and if
+	  it does, it reboots your computer after a certain amount of time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called acquirewdt.
+
+	  Most people will say N.
+
+config ADVANTECH_WDT
+	tristate "Advantech SBC Watchdog Timer"
+	depends on X86
+	help
+	  If you are configuring a Linux kernel for the Advantech single-board
+	  computer, say `Y' here to support its built-in watchdog timer
+	  feature. More information can be found at
+	  <http://www.advantech.com.tw/products/>
+
+config ALIM1535_WDT
+	tristate "ALi M1535 PMU Watchdog Timer"
+	depends on X86 && PCI
+	---help---
+	  This is the driver for the hardware watchdog on the ALi M1535 PMU.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called alim1535_wdt.
+
+	  Most people will say N.
+
+config ALIM7101_WDT
+	tristate "ALi M7101 PMU Computer Watchdog"
+	depends on PCI
+	help
+	  This is the driver for the hardware watchdog on the ALi M7101 PMU
+	  as used in the x86 Cobalt servers and also found in some
+	  SPARC Netra servers too.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called alim7101_wdt.
+
+	  Most people will say N.
+
+config EBC_C384_WDT
+	tristate "WinSystems EBC-C384 Watchdog Timer"
+	depends on X86
+	select ISA_BUS_API
+	select WATCHDOG_CORE
+	help
+	  Enables watchdog timer support for the watchdog timer on the
+	  WinSystems EBC-C384 motherboard. The timeout may be configured via
+	  the timeout module parameter.
+
+config F71808E_WDT
+	tristate "Fintek F718xx, F818xx Super I/O Watchdog"
+	depends on X86
+	help
+	  This is the driver for the hardware watchdog on the Fintek F71808E,
+	  F71862FG, F71868, F71869, F71882FG, F71889FG, F81865 and F81866
+	  Super I/O controllers.
+
+	  You can compile this driver directly into the kernel, or use
+	  it as a module.  The module will be called f71808e_wdt.
+
+config SP5100_TCO
+	tristate "AMD/ATI SP5100 TCO Timer/Watchdog"
+	depends on X86 && PCI
+	select WATCHDOG_CORE
+	---help---
+	  Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO
+	  (Total Cost of Ownership) timer is a watchdog timer that will reboot
+	  the machine after its expiration. The expiration time can be
+	  configured with the "heartbeat" parameter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sp5100_tco.
+
+config GEODE_WDT
+	tristate "AMD Geode CS5535/CS5536 Watchdog"
+	depends on CS5535_MFGPT
+	help
+	  This driver enables a watchdog capability built into the
+	  CS5535/CS5536 companion chips for the AMD Geode GX and LX
+	  processors.  This watchdog watches your kernel to make sure
+	  it doesn't freeze, and if it does, it reboots your computer after
+	  a certain amount of time.
+
+	  You can compile this driver directly into the kernel, or use
+	  it as a module.  The module will be called geodewdt.
+
+config SC520_WDT
+	tristate "AMD Elan SC520 processor Watchdog"
+	depends on MELAN || COMPILE_TEST
+	help
+	  This is the driver for the hardware watchdog built in to the
+	  AMD "Elan" SC520 microcomputer commonly used in embedded systems.
+	  This watchdog simply watches your kernel to make sure it doesn't
+	  freeze, and if it does, it reboots your computer after a certain
+	  amount of time.
+
+	  You can compile this driver directly into the kernel, or use
+	  it as a module.  The module will be called sc520_wdt.
+
+config SBC_FITPC2_WATCHDOG
+	tristate "Compulab SBC-FITPC2 watchdog"
+	depends on X86
+	---help---
+	  This is the driver for the built-in watchdog timer on the fit-PC2,
+	  fit-PC2i, CM-iAM single-board computers made by Compulab.
+
+	  It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
+	  When "Watchdog Timer Value" enabled one can set 31-255 s operational range.
+
+	  Entering BIOS setup temporary disables watchdog operation regardless to current state,
+	  so system will not be restarted while user in BIOS setup.
+
+	  Once watchdog was enabled the system will be restarted every
+	  "Watchdog Timer Value" period, so to prevent it user can restart or
+	  disable the watchdog.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sbc_fitpc2_wdt.
+
+	  Most people will say N.
+
+config EUROTECH_WDT
+	tristate "Eurotech CPU-1220/1410 Watchdog Timer"
+	depends on X86
+	help
+	  Enable support for the watchdog timer on the Eurotech CPU-1220 and
+	  CPU-1410 cards.  These are PC/104 SBCs. Spec sheets and product
+	  information are at <http://www.eurotech.it/>.
+
+config IB700_WDT
+	tristate "IB700 SBC Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog on the IB700 Single
+	  Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
+	  simply watches your kernel to make sure it doesn't freeze, and if
+	  it does, it reboots your computer after a certain amount of time.
+
+	  This driver is like the WDT501 driver but for slightly different hardware.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ib700wdt.
+
+	  Most people will say N.
+
+config IBMASR
+	tristate "IBM Automatic Server Restart"
+	depends on X86
+	help
+	  This is the driver for the IBM Automatic Server Restart watchdog
+	  timer built-in into some eServer xSeries machines.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ibmasr.
+
+config WAFER_WDT
+	tristate "ICP Single Board Computer Watchdog Timer"
+	depends on X86
+	help
+	  This is a driver for the hardware watchdog on the ICP Single
+	  Board Computer. This driver is working on (at least) the following
+	  IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wafer5823wdt.
+
+config I6300ESB_WDT
+	tristate "Intel 6300ESB Timer/Watchdog"
+	depends on PCI
+	select WATCHDOG_CORE
+	---help---
+	  Hardware driver for the watchdog timer built into the Intel
+	  6300ESB controller hub.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called i6300esb.
+
+config IE6XX_WDT
+	tristate "Intel Atom E6xx Watchdog"
+	depends on X86 && PCI
+	select WATCHDOG_CORE
+	select MFD_CORE
+	select LPC_SCH
+	---help---
+	  Hardware driver for the watchdog timer built into the Intel
+	  Atom E6XX (TunnelCreek) processor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ie6xx_wdt.
+
+config INTEL_SCU_WATCHDOG
+	bool "Intel SCU Watchdog for Mobile Platforms"
+	depends on X86_INTEL_MID
+	---help---
+	  Hardware driver for the watchdog time built into the Intel SCU
+	  for Intel Mobile Platforms.
+
+	  To compile this driver as a module, choose M here.
+
+config INTEL_MID_WATCHDOG
+	tristate "Intel MID Watchdog Timer"
+	depends on X86_INTEL_MID
+	select WATCHDOG_CORE
+	---help---
+	  Watchdog timer driver built into the Intel SCU for Intel MID
+	  Platforms.
+
+	  This driver currently supports only the watchdog evolution
+	  implementation in SCU, available for Merrifield generation.
+
+	  To compile this driver as a module, choose M here.
+
+config ITCO_WDT
+	tristate "Intel TCO Timer/Watchdog"
+	depends on (X86 || IA64) && PCI
+	select WATCHDOG_CORE
+	depends on I2C || I2C=n
+	select LPC_ICH if !EXPERT
+	select I2C_I801 if !EXPERT && I2C
+	---help---
+	  Hardware driver for the intel TCO timer based watchdog devices.
+	  These drivers are included in the Intel 82801 I/O Controller
+	  Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
+	  controller hub.
+
+	  The TCO (Total Cost of Ownership) timer is a watchdog timer
+	  that will reboot the machine after its second expiration. The
+	  expiration time can be configured with the "heartbeat" parameter.
+
+	  On some motherboards the driver may fail to reset the chipset's
+	  NO_REBOOT flag which prevents the watchdog from rebooting the
+	  machine. If this is the case you will get a kernel message like
+	  "failed to reset NO_REBOOT flag, reboot disabled by hardware".
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called iTCO_wdt.
+
+config ITCO_VENDOR_SUPPORT
+	bool "Intel TCO Timer/Watchdog Specific Vendor Support"
+	depends on ITCO_WDT
+	---help---
+	  Add vendor specific support to the intel TCO timer based watchdog
+	  devices. At this moment we only have additional support for some
+	  SuperMicro Inc. motherboards.
+
+config IT8712F_WDT
+	tristate "IT8712F (Smart Guardian) Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the built-in watchdog timer on the IT8712F
+	  Super I/0 chipset used on many motherboards.
+
+	  If the driver does not work, then make sure that the game port in
+	  the BIOS is enabled.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called it8712f_wdt.
+
+config IT87_WDT
+	tristate "IT87 Watchdog Timer"
+	depends on X86
+	select WATCHDOG_CORE
+	---help---
+	  This is the driver for the hardware watchdog on the ITE IT8607,
+	  IT8620, IT8622, IT8625, IT8628, IT8655, IT8665, IT8686, IT8702,
+	  IT8712, IT8716, IT8718, IT8720, IT8721, IT8726, IT8728, and
+	  IT8783 Super I/O chips.
+
+	  This watchdog simply watches your kernel to make sure it doesn't
+	  freeze, and if it does, it reboots your computer after a certain
+	  amount of time.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called it87_wdt.
+
+config HP_WATCHDOG
+	tristate "HP ProLiant iLO2+ Hardware Watchdog Timer"
+	select WATCHDOG_CORE
+	depends on X86 && PCI
+	help
+	  A software monitoring watchdog and NMI sourcing driver. This driver
+	  will detect lockups and provide a stack trace. This is a driver that
+	  will only load on an HP ProLiant system with a minimum of iLO2 support.
+	  To compile this driver as a module, choose M here: the module will be
+	  called hpwdt.
+
+config KEMPLD_WDT
+	tristate "Kontron COM Watchdog Timer"
+	depends on MFD_KEMPLD
+	select WATCHDOG_CORE
+	help
+	  Support for the PLD watchdog on some Kontron ETX and COMexpress
+	  (ETXexpress) modules
+
+	  This driver can also be built as a module. If so, the module will be
+	  called kempld_wdt.
+
+config HPWDT_NMI_DECODING
+	bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer"
+	depends on HP_WATCHDOG
+	default y
+	help
+	  When an NMI occurs this feature will make the necessary BIOS calls to
+	  log the cause of the NMI.
+
+config SC1200_WDT
+	tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
+	depends on X86
+	help
+	  This is a driver for National Semiconductor PC87307/PC97307 hardware
+	  watchdog cards as found on the SC1200. This watchdog is mainly used
+	  for power management purposes and can be used to power down the device
+	  during inactivity periods (includes interrupt activity monitoring).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sc1200wdt.
+
+	  Most people will say N.
+
+config SCx200_WDT
+	tristate "National Semiconductor SCx200 Watchdog"
+	depends on SCx200 && PCI
+	help
+	  Enable the built-in watchdog timer support on the National
+	  Semiconductor SCx200 processors.
+
+	  If compiled as a module, it will be called scx200_wdt.
+
+config PC87413_WDT
+	tristate "NS PC87413 watchdog"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog on the PC87413 chipset
+	  This watchdog simply watches your kernel to make sure it doesn't
+	  freeze, and if it does, it reboots your computer after a certain
+	  amount of time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pc87413_wdt.
+
+	  Most people will say N.
+
+config NV_TCO
+	tristate "nVidia TCO Timer/Watchdog"
+	depends on X86 && PCI
+	---help---
+	  Hardware driver for the TCO timer built into the nVidia Hub family
+	  (such as the MCP51).  The TCO (Total Cost of Ownership) timer is a
+	  watchdog timer that will reboot the machine after its second
+	  expiration. The expiration time can be configured with the
+	  "heartbeat" parameter.
+
+	  On some motherboards the driver may fail to reset the chipset's
+	  NO_REBOOT flag which prevents the watchdog from rebooting the
+	  machine. If this is the case you will get a kernel message like
+	  "failed to reset NO_REBOOT flag, reboot disabled by hardware".
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nv_tco.
+
+config RDC321X_WDT
+	tristate "RDC R-321x SoC watchdog"
+	depends on X86_RDC321X || COMPILE_TEST
+	depends on PCI
+	help
+	  This is the driver for the built in hardware watchdog
+	  in the RDC R-321x SoC.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rdc321x_wdt.
+
+config 60XX_WDT
+	tristate "SBC-60XX Watchdog Timer"
+	depends on X86
+	help
+	  This driver can be used with the watchdog timer found on some
+	  single board computers, namely the 6010 PII based computer.
+	  It may well work with other cards.  It reads port 0x443 to enable
+	  and re-set the watchdog timer, and reads port 0x45 to disable
+	  the watchdog.  If you have a card that behave in similar ways,
+	  you can probably make this driver work with your card as well.
+
+	  You can compile this driver directly into the kernel, or use
+	  it as a module.  The module will be called sbc60xxwdt.
+
+config SBC8360_WDT
+	tristate "SBC8360 Watchdog Timer"
+	depends on X86_32
+	---help---
+
+	  This is the driver for the hardware watchdog on the SBC8360 Single
+	  Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sbc8360.
+
+	  Most people will say N.
+
+config SBC7240_WDT
+	tristate "SBC Nano 7240 Watchdog Timer"
+	depends on X86_32 && !UML
+	---help---
+	  This is the driver for the hardware watchdog found on the IEI
+	  single board computers EPIC Nano 7240 (and likely others). This
+	  watchdog simply watches your kernel to make sure it doesn't freeze,
+	  and if it does, it reboots your computer after a certain amount of
+	  time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sbc7240_wdt.
+
+config CPU5_WDT
+	tristate "SMA CPU5 Watchdog"
+	depends on X86
+	---help---
+	  TBD.
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpu5wdt.
+
+config SMSC_SCH311X_WDT
+	tristate "SMSC SCH311X Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog timer on the
+	  SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset
+	  (LPC IO with 8042 KBC, Reset Generation, HWM and multiple
+	  serial ports).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sch311x_wdt.
+
+config SMSC37B787_WDT
+	tristate "Winbond SMsC37B787 Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog component on the
+	  Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
+	  from Vision Systems and maybe others.
+
+	  This watchdog simply watches your kernel to make sure it doesn't
+	  freeze, and if it does, it reboots your computer after a certain
+	  amount of time.
+
+	  Usually a userspace daemon will notify the kernel WDT driver that
+	  userspace is still alive, at regular intervals.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called smsc37b787_wdt.
+
+	  Most people will say N.
+
+config VIA_WDT
+	tristate "VIA Watchdog Timer"
+	depends on X86 && PCI
+	select WATCHDOG_CORE
+	---help---
+	This is the driver for the hardware watchdog timer on VIA
+	southbridge chipset CX700, VX800/VX820 or VX855/VX875.
+
+	To compile this driver as a module, choose M here; the module
+	will be called via_wdt.
+
+	Most people will say N.
+
+config W83627HF_WDT
+	tristate "Watchdog timer for W83627HF/W83627DHG and compatibles"
+	depends on X86
+	select WATCHDOG_CORE
+	---help---
+	  This is the driver for the hardware watchdog on the following
+	  Super I/O chips.
+		W83627DHG/DHG-P/EHF/EHG/F/G/HF/S/SF/THF/UHG/UG
+		W83637HF
+		W83667HG/HG-B
+		W83687THF
+		W83697HF
+		W83697UG
+		NCT6775
+		NCT6776
+		NCT6779
+		NCT6791
+		NCT6792
+		NCT6102D/04D/06D
+
+	  This watchdog simply watches your kernel to make sure it doesn't
+	  freeze, and if it does, it reboots your computer after a certain
+	  amount of time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called w83627hf_wdt.
+
+	  Most people will say N.
+
+config W83877F_WDT
+	tristate "W83877F (EMACS) Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog on the W83877F chipset
+	  as used in EMACS PC-104 motherboards (and likely others).  This
+	  watchdog simply watches your kernel to make sure it doesn't freeze,
+	  and if it does, it reboots your computer after a certain amount of
+	  time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called w83877f_wdt.
+
+	  Most people will say N.
+
+config W83977F_WDT
+	tristate "W83977F (PCM-5335) Watchdog Timer"
+	depends on X86
+	---help---
+	  This is the driver for the hardware watchdog on the W83977F I/O chip
+	  as used in AAEON's PCM-5335 SBC (and likely others).  This
+	  watchdog simply watches your kernel to make sure it doesn't freeze,
+	  and if it does, it reboots your computer after a certain amount of
+	  time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called w83977f_wdt.
+
+config MACHZ_WDT
+	tristate "ZF MachZ Watchdog"
+	depends on X86
+	---help---
+	  If you are using a ZF Micro MachZ processor, say Y here, otherwise
+	  N.  This is the driver for the watchdog timer built-in on that
+	  processor using ZF-Logic interface.  This watchdog simply watches
+	  your kernel to make sure it doesn't freeze, and if it does, it
+	  reboots your computer after a certain amount of time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called machzwd.
+
+config SBC_EPX_C3_WATCHDOG
+	tristate "Winsystems SBC EPX-C3 watchdog"
+	depends on X86
+	---help---
+	  This is the driver for the built-in watchdog timer on the EPX-C3
+	  Single-board computer made by Winsystems, Inc.
+
+	  *Note*: This hardware watchdog is not probeable and thus there
+	  is no way to know if writing to its IO address will corrupt
+	  your system or have any real effect.  The only way to be sure
+	  that this driver does what you want is to make sure you
+	  are running it on an EPX-C3 from Winsystems with the watchdog
+	  timer at IO address 0x1ee and 0x1ef.  It will write to both those
+	  IO ports.  Basically, the assumption is made that if you compile
+	  this driver into your kernel and/or load it as a module, that you
+	  know what you are doing and that you are in fact running on an
+	  EPX-C3 board!
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sbc_epx_c3.
+
+config INTEL_MEI_WDT
+	tristate "Intel MEI iAMT Watchdog"
+	depends on INTEL_MEI && X86
+	select WATCHDOG_CORE
+	---help---
+	  A device driver for the Intel MEI iAMT watchdog.
+
+	  The Intel AMT Watchdog is an OS Health (Hang/Crash) watchdog.
+	  Whenever the OS hangs or crashes, iAMT will send an event
+	  to any subscriber to this event. The watchdog doesn't reset the
+	  the platform.
+
+	  To compile this driver as a module, choose M here:
+	  the module will be called mei_wdt.
+
+config NI903X_WDT
+	tristate "NI 903x/913x Watchdog"
+	depends on X86 && ACPI
+	select WATCHDOG_CORE
+	---help---
+	  This is the driver for the watchdog timer on the National Instruments
+	  903x/913x real-time controllers.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ni903x_wdt.
+
+config NIC7018_WDT
+	tristate "NIC7018 Watchdog"
+	depends on X86 && ACPI
+	select WATCHDOG_CORE
+	---help---
+	  Support for National Instruments NIC7018 Watchdog.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called nic7018_wdt.
+
+# M68K Architecture
+
+config M54xx_WATCHDOG
+	tristate "MCF54xx watchdog support"
+	depends on M548x
+	help
+	  To compile this driver as a module, choose M here: the
+	  module will be called m54xx_wdt.
+
+# MicroBlaze Architecture
+
+# MIPS Architecture
+
+config ATH79_WDT
+	tristate "Atheros AR71XX/AR724X/AR913X hardware watchdog"
+	depends on ATH79 || (ARM && COMPILE_TEST)
+	help
+	  Hardware driver for the built-in watchdog timer on the Atheros
+	  AR71XX/AR724X/AR913X SoCs.
+
+config BCM47XX_WDT
+	tristate "Broadcom BCM47xx Watchdog Timer"
+	depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Hardware driver for the Broadcom BCM47xx Watchdog Timer.
+
+config RC32434_WDT
+	tristate "IDT RC32434 SoC Watchdog Timer"
+	depends on MIKROTIK_RB532
+	help
+	  Hardware driver for the IDT RC32434 SoC built-in
+	  watchdog timer.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rc32434_wdt.
+
+config INDYDOG
+	tristate "Indy/I2 Hardware Watchdog"
+	depends on SGI_HAS_INDYDOG
+	help
+	  Hardware driver for the Indy's/I2's watchdog. This is a
+	  watchdog timer that will reboot the machine after a 60 second
+	  timer expired and no process has written to /dev/watchdog during
+	  that time.
+
+config JZ4740_WDT
+	tristate "Ingenic jz4740 SoC hardware watchdog"
+	depends on MACH_JZ4740 || MACH_JZ4780
+	select WATCHDOG_CORE
+	help
+	  Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs.
+
+config WDT_MTX1
+	tristate "MTX-1 Hardware Watchdog"
+	depends on MIPS_MTX1 || (MIPS && COMPILE_TEST)
+	help
+	  Hardware driver for the MTX-1 boards. This is a watchdog timer that
+	  will reboot the machine after a 100 seconds timer expired.
+
+config PNX833X_WDT
+	tristate "PNX833x Hardware Watchdog"
+	depends on SOC_PNX8335
+	depends on BROKEN
+	help
+	  Hardware driver for the PNX833x's watchdog. This is a
+	  watchdog timer that will reboot the machine after a programmable
+	  timer has expired and no process has written to /dev/watchdog during
+	  that time.
+
+config SIBYTE_WDOG
+	tristate "Sibyte SoC hardware watchdog"
+	depends on CPU_SB1 || (MIPS && COMPILE_TEST)
+	help
+	  Watchdog driver for the built in watchdog hardware in Sibyte
+	  SoC processors.  There are apparently two watchdog timers
+	  on such processors; this driver supports only the first one,
+	  because currently Linux only supports exporting one watchdog
+	  to userspace.
+
+	  To compile this driver as a loadable module, choose M here.
+	  The module will be called sb_wdog.
+
+config AR7_WDT
+	tristate "TI AR7 Watchdog Timer"
+	depends on AR7 || (MIPS && 32BIT && COMPILE_TEST)
+	help
+	  Hardware driver for the TI AR7 Watchdog Timer.
+
+config TXX9_WDT
+	tristate "Toshiba TXx9 Watchdog Timer"
+	depends on CPU_TX39XX || CPU_TX49XX || (MIPS && COMPILE_TEST)
+	select WATCHDOG_CORE
+	help
+	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+
+config OCTEON_WDT
+	tristate "Cavium OCTEON SOC family Watchdog Timer"
+	depends on CAVIUM_OCTEON_SOC
+	default y
+	select WATCHDOG_CORE
+	select EXPORT_UASM if OCTEON_WDT = m
+	help
+	  Hardware driver for OCTEON's on chip watchdog timer.
+	  Enables the watchdog for all cores running Linux. It
+	  installs a NMI handler and pokes the watchdog based on an
+	  interrupt.  On first expiration of the watchdog, the
+	  interrupt handler pokes it.  The second expiration causes an
+	  NMI that prints a message. The third expiration causes a
+	  global soft reset.
+
+	  When userspace has /dev/watchdog open, no poking is done
+	  from the first interrupt, it is then only poked when the
+	  device is written.
+
+config BCM63XX_WDT
+	tristate "Broadcom BCM63xx hardware watchdog"
+	depends on BCM63XX
+	help
+	  Watchdog driver for the built in watchdog hardware in Broadcom
+	  BCM63xx SoC.
+
+	  To compile this driver as a loadable module, choose M here.
+	  The module will be called bcm63xx_wdt.
+
+config BCM2835_WDT
+	tristate "Broadcom BCM2835 hardware watchdog"
+	depends on ARCH_BCM2835 || (OF && COMPILE_TEST)
+	select WATCHDOG_CORE
+	help
+	  Watchdog driver for the built in watchdog hardware in Broadcom
+	  BCM2835 SoC.
+
+	  To compile this driver as a loadable module, choose M here.
+	  The module will be called bcm2835_wdt.
+
+config BCM_KONA_WDT
+	tristate "BCM Kona Watchdog"
+	depends on ARCH_BCM_MOBILE || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Support for the watchdog timer on the following Broadcom BCM281xx
+	  family, which includes BCM11130, BCM11140, BCM11351, BCM28145 and
+	  BCM28155 variants.
+
+	  Say 'Y' or 'M' here to enable the driver. The module will be called
+	  bcm_kona_wdt.
+
+config BCM_KONA_WDT_DEBUG
+	bool "DEBUGFS support for BCM Kona Watchdog"
+	depends on BCM_KONA_WDT || COMPILE_TEST
+	help
+	  If enabled, adds /sys/kernel/debug/bcm_kona_wdt/info which provides
+	  access to the driver's internal data structures as well as watchdog
+	  timer hardware registres.
+
+	  If in doubt, say 'N'.
+
+config BCM7038_WDT
+	tristate "BCM7038 Watchdog"
+	select WATCHDOG_CORE
+	depends on HAS_IOMEM
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+	help
+	 Watchdog driver for the built-in hardware in Broadcom 7038 and
+	 later SoCs used in set-top boxes.  BCM7038 was made public
+	 during the 2004 CES, and since then, many Broadcom chips use this
+	 watchdog block, including some cable modem chips.
+
+config IMGPDC_WDT
+	tristate "Imagination Technologies PDC Watchdog Timer"
+	depends on HAS_IOMEM
+	depends on MIPS || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  Driver for Imagination Technologies PowerDown Controller
+	  Watchdog Timer.
+
+	  To compile this driver as a loadable module, choose M here.
+	  The module will be called imgpdc_wdt.
+
+config LANTIQ_WDT
+	tristate "Lantiq SoC watchdog"
+	depends on LANTIQ
+	help
+	  Hardware driver for the Lantiq SoC Watchdog Timer.
+
+config LOONGSON1_WDT
+	tristate "Loongson1 SoC hardware watchdog"
+	depends on MACH_LOONGSON32
+	select WATCHDOG_CORE
+	help
+	  Hardware driver for the Loongson1 SoC Watchdog Timer.
+
+config RALINK_WDT
+	tristate "Ralink SoC watchdog"
+	select WATCHDOG_CORE
+	depends on RALINK
+	help
+	  Hardware driver for the Ralink SoC Watchdog Timer.
+
+config MT7621_WDT
+	tristate "Mediatek SoC watchdog"
+	select WATCHDOG_CORE
+	depends on SOC_MT7620 || SOC_MT7621
+	help
+	  Hardware driver for the Mediatek/Ralink MT7621/8 SoC Watchdog Timer.
+
+config PIC32_WDT
+	tristate "Microchip PIC32 hardware watchdog"
+	select WATCHDOG_CORE
+	depends on MACH_PIC32 || (MIPS && COMPILE_TEST)
+	help
+	  Watchdog driver for the built in watchdog hardware in a PIC32.
+
+	  Configuration bits must be set appropriately for the watchdog to be
+	  controlled by this driver.
+
+	  To compile this driver as a loadable module, choose M here.
+	  The module will be called pic32-wdt.
+
+config PIC32_DMT
+	tristate "Microchip PIC32 Deadman Timer"
+	select WATCHDOG_CORE
+	depends on MACH_PIC32 || (MIPS && COMPILE_TEST)
+	help
+	  Watchdog driver for PIC32 instruction fetch counting timer. This specific
+	  timer is typically be used in misson critical and safety critical
+	  applications, where any single failure of the software functionality
+	  and sequencing must be detected.
+
+	  To compile this driver as a loadable module, choose M here.
+	  The module will be called pic32-dmt.
+
+# PARISC Architecture
+
+# POWERPC Architecture
+
+config GEF_WDT
+	tristate "GE Watchdog Timer"
+	depends on GE_FPGA
+	---help---
+	  Watchdog timer found in a number of GE single board computers.
+
+config MPC5200_WDT
+	bool "MPC52xx Watchdog Timer"
+	depends on PPC_MPC52xx || COMPILE_TEST
+	help
+	  Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog.
+
+config 8xxx_WDT
+	tristate "MPC8xxx Platform Watchdog Timer"
+	depends on PPC_8xx || PPC_83xx || PPC_86xx || PPC_MPC512x
+	select WATCHDOG_CORE
+	help
+	  This driver is for a SoC level watchdog that exists on some
+	  Freescale PowerPC processors. So far this driver supports:
+	  - MPC8xx watchdogs
+	  - MPC83xx watchdogs
+	  - MPC86xx watchdogs
+
+	  For BookE processors (MPC85xx) use the BOOKE_WDT driver instead.
+
+config MV64X60_WDT
+	tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
+	depends on MV64X60 || COMPILE_TEST
+
+config PIKA_WDT
+	tristate "PIKA FPGA Watchdog"
+	depends on WARP || (PPC64 && COMPILE_TEST)
+	default y
+	help
+	  This enables the watchdog in the PIKA FPGA. Currently used on
+	  the Warp platform.
+
+config BOOKE_WDT
+	tristate "PowerPC Book-E Watchdog Timer"
+	depends on BOOKE || 4xx
+	select WATCHDOG_CORE
+	---help---
+	  Watchdog driver for PowerPC Book-E chips, such as the Freescale
+	  MPC85xx SOCs and the IBM PowerPC 440.
+
+	  Please see Documentation/watchdog/watchdog-api.txt for
+	  more information.
+
+config BOOKE_WDT_DEFAULT_TIMEOUT
+	int "PowerPC Book-E Watchdog Timer Default Timeout"
+	depends on BOOKE_WDT
+	default 38 if PPC_FSL_BOOK3E
+	range 0 63 if PPC_FSL_BOOK3E
+	default 3 if !PPC_FSL_BOOK3E
+	range 0 3 if !PPC_FSL_BOOK3E
+	help
+	  Select the default watchdog timer period to be used by the PowerPC
+	  Book-E watchdog driver.  A watchdog "event" occurs when the bit
+	  position represented by this number transitions from zero to one.
+
+	  For Freescale Book-E processors, this is a number between 0 and 63.
+	  For other Book-E processors, this is a number between 0 and 3.
+
+	  The value can be overridden by the wdt_period command-line parameter.
+
+config MEN_A21_WDT
+	tristate "MEN A21 VME CPU Carrier Board Watchdog Timer"
+	select WATCHDOG_CORE
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  Watchdog driver for MEN A21 VMEbus CPU Carrier Boards.
+
+	  The driver can also be built as a module. If so, the module will be
+	  called mena21_wdt.
+
+	  If unsure select N here.
+
+# PPC64 Architecture
+
+config WATCHDOG_RTAS
+	tristate "RTAS watchdog"
+	depends on PPC_RTAS
+	help
+	  This driver adds watchdog support for the RTAS watchdog.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called wdrtas.
+
+# S390 Architecture
+
+config DIAG288_WATCHDOG
+	tristate "System z diag288 Watchdog"
+	depends on S390
+	select WATCHDOG_CORE
+	help
+	  IBM s/390 and zSeries machines running under z/VM 5.1 or later
+	  provide a virtual watchdog timer to their guest that cause a
+	  user define Control Program command to be executed after a
+	  timeout.
+	  LPAR provides a very similar interface. This driver handles
+	  both.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called diag288_wdt.
+
+# SUPERH (sh + sh64) Architecture
+
+config SH_WDT
+	tristate "SuperH Watchdog"
+	depends on SUPERH && (CPU_SH3 || CPU_SH4 || COMPILE_TEST)
+	select WATCHDOG_CORE
+	help
+	  This driver adds watchdog support for the integrated watchdog in the
+	  SuperH processors. If you have one of these processors and wish
+	  to have watchdog support enabled, say Y, otherwise say N.
+
+	  As a side note, saying Y here will automatically boost HZ to 1000
+	  so that the timer has a chance to clear the overflow counter. On
+	  slower systems (such as the SH-2 and SH-3) this will likely yield
+	  some performance issues. As such, the WDT should be avoided here
+	  unless it is absolutely necessary.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called shwdt.
+
+# SPARC Architecture
+
+# SPARC64 Architecture
+
+config WATCHDOG_CP1XXX
+	tristate "CP1XXX Hardware Watchdog support"
+	depends on SPARC64 && PCI
+	---help---
+	  This is the driver for the hardware watchdog timers present on
+	  Sun Microsystems CompactPCI models CP1400 and CP1500.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cpwatchdog.
+
+	  If you do not have a CompactPCI model CP1400 or CP1500, or
+	  another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
+	  you should say N to this option.
+
+config WATCHDOG_RIO
+	tristate "RIO Hardware Watchdog support"
+	depends on SPARC64 && PCI
+	help
+	  Say Y here to support the hardware watchdog capability on Sun RIO
+	  machines.  The watchdog timeout period is normally one minute but
+	  can be changed with a boot-time parameter.
+
+config WATCHDOG_SUN4V
+	tristate "Sun4v Watchdog support"
+	select WATCHDOG_CORE
+	depends on SPARC64
+	help
+	  Say Y here to support the hypervisor watchdog capability embedded
+	  in the SPARC sun4v architecture.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called sun4v_wdt.
+
+# XTENSA Architecture
+
+# Xen Architecture
+
+config XEN_WDT
+	tristate "Xen Watchdog support"
+	depends on XEN
+	select WATCHDOG_CORE
+	help
+	  Say Y here to support the hypervisor watchdog capability provided
+	  by Xen 4.0 and newer.  The watchdog timeout period is normally one
+	  minute but can be changed with a boot-time parameter.
+
+config UML_WATCHDOG
+	tristate "UML watchdog"
+	depends on UML || COMPILE_TEST
+
+#
+# ISA-based Watchdog Cards
+#
+
+comment "ISA-based Watchdog Cards"
+	depends on ISA
+
+config PCWATCHDOG
+	tristate "Berkshire Products ISA-PC Watchdog"
+	depends on ISA
+	---help---
+	  This is the driver for the Berkshire Products ISA-PC Watchdog card.
+	  This card simply watches your kernel to make sure it doesn't freeze,
+	  and if it does, it reboots your computer after a certain amount of
+	  time. This driver is like the WDT501 driver but for different
+	  hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC
+	  watchdog cards can be ordered from <http://www.berkprod.com/>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcwd.
+
+	  Most people will say N.
+
+config MIXCOMWD
+	tristate "Mixcom Watchdog"
+	depends on ISA
+	---help---
+	  This is a driver for the Mixcom hardware watchdog cards.  This
+	  watchdog simply watches your kernel to make sure it doesn't freeze,
+	  and if it does, it reboots your computer after a certain amount of
+	  time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mixcomwd.
+
+	  Most people will say N.
+
+config WDT
+	tristate "WDT Watchdog timer"
+	depends on ISA
+	---help---
+	  If you have a WDT500P or WDT501P watchdog board, say Y here,
+	  otherwise N. It is not possible to probe for this board, which means
+	  that you have to inform the kernel about the IO port and IRQ that
+	  is needed (you can do this via the io and irq parameters)
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wdt.
+
+#
+# PCI-based Watchdog Cards
+#
+
+comment "PCI-based Watchdog Cards"
+	depends on PCI
+
+config PCIPCWATCHDOG
+	tristate "Berkshire Products PCI-PC Watchdog"
+	depends on PCI
+	---help---
+	  This is the driver for the Berkshire Products PCI-PC Watchdog card.
+	  This card simply watches your kernel to make sure it doesn't freeze,
+	  and if it does, it reboots your computer after a certain amount of
+	  time. The card can also monitor the internal temperature of the PC.
+	  More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcwd_pci.
+
+	  Most people will say N.
+
+config WDTPCI
+	tristate "PCI-WDT500/501 Watchdog timer"
+	depends on PCI
+	---help---
+	  If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
+
+	  If you have a PCI-WDT501 watchdog board then you can enable the
+	  temperature sensor by setting the type parameter to 501.
+
+	  If you want to enable the Fan Tachometer on the PCI-WDT501, then you
+	  can do this via the tachometer parameter. Only do this if you have a
+	  fan tachometer actually set up.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wdt_pci.
+
+#
+# USB-based Watchdog Cards
+#
+
+comment "USB-based Watchdog Cards"
+	depends on USB
+
+config USBPCWATCHDOG
+	tristate "Berkshire Products USB-PC Watchdog"
+	depends on USB
+	---help---
+	  This is the driver for the Berkshire Products USB-PC Watchdog card.
+	  This card simply watches your kernel to make sure it doesn't freeze,
+	  and if it does, it reboots your computer after a certain amount of
+	  time. The card can also monitor the internal temperature of the PC.
+	  More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcwd_usb.
+
+	  Most people will say N.
+
+comment "Watchdog Pretimeout Governors"
+
+config WATCHDOG_PRETIMEOUT_GOV
+	bool "Enable watchdog pretimeout governors"
+	depends on WATCHDOG_CORE
+	help
+	  The option allows to select watchdog pretimeout governors.
+
+if WATCHDOG_PRETIMEOUT_GOV
+
+choice
+	prompt "Default Watchdog Pretimeout Governor"
+	default WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC
+	help
+	  This option selects a default watchdog pretimeout governor.
+	  The governor takes its action, if a watchdog is capable
+	  to report a pretimeout event.
+
+config WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP
+	bool "noop"
+	select WATCHDOG_PRETIMEOUT_GOV_NOOP
+	help
+	  Use noop watchdog pretimeout governor by default. If noop
+	  governor is selected by a user, write a short message to
+	  the kernel log buffer and don't do any system changes.
+
+config WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC
+	bool "panic"
+	select WATCHDOG_PRETIMEOUT_GOV_PANIC
+	help
+	  Use panic watchdog pretimeout governor by default, if
+	  a watchdog pretimeout event happens, consider that
+	  a watchdog feeder is dead and reboot is unavoidable.
+
+endchoice
+
+config WATCHDOG_PRETIMEOUT_GOV_NOOP
+	tristate "Noop watchdog pretimeout governor"
+	help
+	  Noop watchdog pretimeout governor, only an informational
+	  message is added to kernel log buffer.
+
+config WATCHDOG_PRETIMEOUT_GOV_PANIC
+	tristate "Panic watchdog pretimeout governor"
+	help
+	  Panic watchdog pretimeout governor, on watchdog pretimeout
+	  event put the kernel into panic.
+
+endif # WATCHDOG_PRETIMEOUT_GOV
+
+endif # WATCHDOG
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
new file mode 100644
index 000000000..bf92e7bf9
--- /dev/null
+++ b/drivers/watchdog/Makefile
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the WatchDog device drivers.
+#
+
+# The WatchDog Timer Driver Core.
+obj-$(CONFIG_WATCHDOG_CORE)	+= watchdog.o
+
+watchdog-objs	+= watchdog_core.o watchdog_dev.o
+
+watchdog-$(CONFIG_WATCHDOG_PRETIMEOUT_GOV)	+= watchdog_pretimeout.o
+
+obj-$(CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP)	+= pretimeout_noop.o
+obj-$(CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC)	+= pretimeout_panic.o
+
+# Only one watchdog can succeed. We probe the ISA/PCI/USB based
+# watchdog-cards first, then the architecture specific watchdog
+# drivers and then the architecture independent "softdog" driver.
+# This means that if your ISA/PCI/USB card isn't detected that
+# you can fall back to an architecture specific driver and if
+# that also fails then you can fall back to the software watchdog
+# to give you some cover.
+
+# ISA-based Watchdog Cards
+obj-$(CONFIG_PCWATCHDOG) += pcwd.o
+obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
+obj-$(CONFIG_WDT) += wdt.o
+
+# PCI-based Watchdog Cards
+obj-$(CONFIG_PCIPCWATCHDOG) += pcwd_pci.o
+obj-$(CONFIG_WDTPCI) += wdt_pci.o
+
+# USB-based Watchdog Cards
+obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
+
+# ALPHA Architecture
+
+# ARM Architecture
+obj-$(CONFIG_ARM_SP805_WATCHDOG) += sp805_wdt.o
+obj-$(CONFIG_ARM_SBSA_WATCHDOG) += sbsa_gwdt.o
+obj-$(CONFIG_ASM9260_WATCHDOG) += asm9260_wdt.o
+obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
+obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o
+obj-$(CONFIG_CADENCE_WATCHDOG) += cadence_wdt.o
+obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
+obj-$(CONFIG_TWL4030_WATCHDOG) += twl4030_wdt.o
+obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
+obj-$(CONFIG_977_WATCHDOG) += wdt977.o
+obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
+obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o
+obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o
+obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o
+obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o
+obj-$(CONFIG_SAMA5D4_WATCHDOG) += sama5d4_wdt.o
+obj-$(CONFIG_DW_WATCHDOG) += dw_wdt.o
+obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
+obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
+obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
+obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
+obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
+obj-$(CONFIG_SUNXI_WATCHDOG) += sunxi_wdt.o
+obj-$(CONFIG_RN5T618_WATCHDOG) += rn5t618_wdt.o
+obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
+obj-$(CONFIG_NPCM7XX_WATCHDOG) += npcm_wdt.o
+obj-$(CONFIG_STMP3XXX_RTC_WATCHDOG) += stmp3xxx_rtc_wdt.o
+obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
+obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o
+obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
+obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
+obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
+obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
+obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
+obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o
+obj-$(CONFIG_SIRFSOC_WATCHDOG) += sirfsoc_wdt.o
+obj-$(CONFIG_ST_LPC_WATCHDOG) += st_lpc_wdt.o
+obj-$(CONFIG_QCOM_WDT) += qcom-wdt.o
+obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o
+obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
+obj-$(CONFIG_MESON_GXBB_WATCHDOG) += meson_gxbb_wdt.o
+obj-$(CONFIG_MESON_WATCHDOG) += meson_wdt.o
+obj-$(CONFIG_MEDIATEK_WATCHDOG) += mtk_wdt.o
+obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o
+obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o
+obj-$(CONFIG_BCM7038_WDT) += bcm7038_wdt.o
+obj-$(CONFIG_ATLAS7_WATCHDOG) += atlas7_wdt.o
+obj-$(CONFIG_RENESAS_WDT) += renesas_wdt.o
+obj-$(CONFIG_RENESAS_RZAWDT) += rza_wdt.o
+obj-$(CONFIG_ASPEED_WATCHDOG) += aspeed_wdt.o
+obj-$(CONFIG_ZX2967_WATCHDOG) += zx2967_wdt.o
+obj-$(CONFIG_STM32_WATCHDOG) += stm32_iwdg.o
+obj-$(CONFIG_UNIPHIER_WATCHDOG) += uniphier_wdt.o
+obj-$(CONFIG_RTD119X_WATCHDOG) += rtd119x_wdt.o
+obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
+
+# X86 (i386 + ia64 + x86_64) Architecture
+obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
+obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
+obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o
+obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
+obj-$(CONFIG_EBC_C384_WDT) += ebc-c384_wdt.o
+obj-$(CONFIG_F71808E_WDT) += f71808e_wdt.o
+obj-$(CONFIG_SP5100_TCO) += sp5100_tco.o
+obj-$(CONFIG_GEODE_WDT) += geodewdt.o
+obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
+obj-$(CONFIG_SBC_FITPC2_WATCHDOG) += sbc_fitpc2_wdt.o
+obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
+obj-$(CONFIG_IB700_WDT) += ib700wdt.o
+obj-$(CONFIG_IBMASR) += ibmasr.o
+obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
+obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
+obj-$(CONFIG_IE6XX_WDT) += ie6xx_wdt.o
+obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o
+ifeq ($(CONFIG_ITCO_VENDOR_SUPPORT),y)
+obj-$(CONFIG_ITCO_WDT) += iTCO_vendor_support.o
+endif
+obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o
+obj-$(CONFIG_IT87_WDT) += it87_wdt.o
+obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o
+obj-$(CONFIG_KEMPLD_WDT) += kempld_wdt.o
+obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
+obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
+obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o
+obj-$(CONFIG_NV_TCO) += nv_tco.o
+obj-$(CONFIG_RDC321X_WDT) += rdc321x_wdt.o
+obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
+obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
+obj-$(CONFIG_SBC7240_WDT) += sbc7240_wdt.o
+obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
+obj-$(CONFIG_SMSC_SCH311X_WDT) += sch311x_wdt.o
+obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o
+obj-$(CONFIG_VIA_WDT) += via_wdt.o
+obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
+obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
+obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o
+obj-$(CONFIG_MACHZ_WDT) += machzwd.o
+obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o
+obj-$(CONFIG_INTEL_SCU_WATCHDOG) += intel_scu_watchdog.o
+obj-$(CONFIG_INTEL_MID_WATCHDOG) += intel-mid_wdt.o
+obj-$(CONFIG_INTEL_MEI_WDT) += mei_wdt.o
+obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o
+obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o
+
+# M68K Architecture
+obj-$(CONFIG_M54xx_WATCHDOG) += m54xx_wdt.o
+
+# MicroBlaze Architecture
+obj-$(CONFIG_XILINX_WATCHDOG) += of_xilinx_wdt.o
+
+# MIPS Architecture
+obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o
+obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o
+obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
+obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
+obj-$(CONFIG_INDYDOG) += indydog.o
+obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
+obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
+obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
+obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
+octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
+obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
+obj-$(CONFIG_LOONGSON1_WDT) += loongson1_wdt.o
+obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
+obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o
+obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
+obj-$(CONFIG_PIC32_WDT) += pic32-wdt.o
+obj-$(CONFIG_PIC32_DMT) += pic32-dmt.o
+
+# PARISC Architecture
+
+# POWERPC Architecture
+obj-$(CONFIG_GEF_WDT) += gef_wdt.o
+obj-$(CONFIG_8xxx_WDT) += mpc8xxx_wdt.o
+obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o
+obj-$(CONFIG_PIKA_WDT) += pika_wdt.o
+obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
+obj-$(CONFIG_MEN_A21_WDT) += mena21_wdt.o
+
+# PPC64 Architecture
+obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
+
+# S390 Architecture
+obj-$(CONFIG_DIAG288_WATCHDOG) += diag288_wdt.o
+
+# SUPERH (sh + sh64) Architecture
+obj-$(CONFIG_SH_WDT) += shwdt.o
+
+# SPARC Architecture
+
+# SPARC64 Architecture
+
+obj-$(CONFIG_WATCHDOG_RIO)		+= riowd.o
+obj-$(CONFIG_WATCHDOG_CP1XXX)		+= cpwd.o
+obj-$(CONFIG_WATCHDOG_SUN4V)		+= sun4v_wdt.o
+
+# XTENSA Architecture
+
+# Xen
+obj-$(CONFIG_XEN_WDT) += xen_wdt.o
+
+# Architecture Independent
+obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
+obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
+obj-$(CONFIG_DA9062_WATCHDOG) += da9062_wdt.o
+obj-$(CONFIG_DA9063_WATCHDOG) += da9063_wdt.o
+obj-$(CONFIG_GPIO_WATCHDOG)	+= gpio_wdt.o
+obj-$(CONFIG_TANGOX_WATCHDOG) += tangox_wdt.o
+obj-$(CONFIG_WDAT_WDT) += wdat_wdt.o
+obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
+obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
+obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
+obj-$(CONFIG_MAX77620_WATCHDOG) += max77620_wdt.o
+obj-$(CONFIG_ZIIRAVE_WATCHDOG) += ziirave_wdt.o
+obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
+obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o
+obj-$(CONFIG_MENZ069_WATCHDOG) += menz69_wdt.o
+obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o
diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c
new file mode 100644
index 000000000..d6210d946
--- /dev/null
+++ b/drivers/watchdog/acquirewdt.c
@@ -0,0 +1,334 @@
+/*
+ *	Acquire Single Board Computer Watchdog Timer driver
+ *
+ *	Based on wdt.c. Original copyright messages:
+ *
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ *	warranty for any of this software. This material is provided
+ *	"AS-IS" and at no charge.
+ *
+ *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ *	14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
+ *	    Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
+ *	    Can't add timeout - driver doesn't allow changing value
+ */
+
+/*
+ *	Theory of Operation:
+ *		The Watch-Dog Timer is provided to ensure that standalone
+ *		Systems can always recover from catastrophic conditions that
+ *		caused the CPU to crash. This condition may have occurred by
+ *		external EMI or a software bug. When the CPU stops working
+ *		correctly, hardware on the board will either perform a hardware
+ *		reset (cold boot) or a non-maskable interrupt (NMI) to bring the
+ *		system back to a known state.
+ *
+ *		The Watch-Dog Timer is controlled by two I/O Ports.
+ *		  443 hex	- Read	- Enable or refresh the Watch-Dog Timer
+ *		  043 hex	- Read	- Disable the Watch-Dog Timer
+ *
+ *		To enable the Watch-Dog Timer, a read from I/O port 443h must
+ *		be performed. This will enable and activate the countdown timer
+ *		which will eventually time out and either reset the CPU or cause
+ *		an NMI depending on the setting of a jumper. To ensure that this
+ *		reset condition does not occur, the Watch-Dog Timer must be
+ *		periodically refreshed by reading the same I/O port 443h.
+ *		The Watch-Dog Timer is disabled by reading I/O port 043h.
+ *
+ *		The Watch-Dog Timer Time-Out Period is set via jumpers.
+ *		It can be 1, 2, 10, 20, 110 or 220 seconds.
+ */
+
+/*
+ *	Includes, defines, variables, module parameters, ...
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+/* Includes */
+#include <linux/module.h>		/* For module specific items */
+#include <linux/moduleparam.h>		/* For new moduleparam's */
+#include <linux/types.h>		/* For standard types (like size_t) */
+#include <linux/errno.h>		/* For the -ENODEV/... values */
+#include <linux/kernel.h>		/* For printk/panic/... */
+#include <linux/miscdevice.h>		/* For struct miscdevice */
+#include <linux/watchdog.h>		/* For the watchdog specific items */
+#include <linux/fs.h>			/* For file operations */
+#include <linux/ioport.h>		/* For io-port access */
+#include <linux/platform_device.h>	/* For platform_driver framework */
+#include <linux/init.h>			/* For __init/__exit/... */
+#include <linux/uaccess.h>		/* For copy_to_user/put_user/... */
+#include <linux/io.h>			/* For inb/outb/... */
+
+/* Module information */
+#define DRV_NAME "acquirewdt"
+#define WATCHDOG_NAME "Acquire WDT"
+/* There is no way to see what the correct time-out period is */
+#define WATCHDOG_HEARTBEAT 0
+
+/* internal variables */
+/* the watchdog platform device */
+static struct platform_device *acq_platform_device;
+static unsigned long acq_is_open;
+static char expect_close;
+
+/* module parameters */
+/* You must set this - there is no sane way to probe for this board. */
+static int wdt_stop = 0x43;
+module_param(wdt_stop, int, 0);
+MODULE_PARM_DESC(wdt_stop, "Acquire WDT 'stop' io port (default 0x43)");
+
+/* You must set this - there is no sane way to probe for this board. */
+static int wdt_start = 0x443;
+module_param(wdt_start, int, 0);
+MODULE_PARM_DESC(wdt_start, "Acquire WDT 'start' io port (default 0x443)");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/*
+ *	Watchdog Operations
+ */
+
+static void acq_keepalive(void)
+{
+	/* Write a watchdog value */
+	inb_p(wdt_start);
+}
+
+static void acq_stop(void)
+{
+	/* Turn the card off */
+	inb_p(wdt_stop);
+}
+
+/*
+ *	/dev/watchdog handling
+ */
+
+static ssize_t acq_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
+{
+	/* See if we got the magic character 'V' and reload the timer */
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+			/* note: just in case someone wrote the magic character
+			   five months ago... */
+			expect_close = 0;
+			/* scan to see whether or not we got the
+			   magic character */
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+		/* Well, anyhow someone wrote to us, we should
+				return that favour */
+		acq_keepalive();
+	}
+	return count;
+}
+
+static long acq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	int options, retval = -EINVAL;
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+		.firmware_version = 1,
+		.identity = WATCHDOG_NAME,
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_SETOPTIONS:
+	{
+		if (get_user(options, p))
+			return -EFAULT;
+		if (options & WDIOS_DISABLECARD) {
+			acq_stop();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			acq_keepalive();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		acq_keepalive();
+		return 0;
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(WATCHDOG_HEARTBEAT, p);
+
+	default:
+		return -ENOTTY;
+	}
+}
+
+static int acq_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &acq_is_open))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	/* Activate */
+	acq_keepalive();
+	return nonseekable_open(inode, file);
+}
+
+static int acq_close(struct inode *inode, struct file *file)
+{
+	if (expect_close == 42) {
+		acq_stop();
+	} else {
+		pr_crit("Unexpected close, not stopping watchdog!\n");
+		acq_keepalive();
+	}
+	clear_bit(0, &acq_is_open);
+	expect_close = 0;
+	return 0;
+}
+
+/*
+ *	Kernel Interfaces
+ */
+
+static const struct file_operations acq_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= acq_write,
+	.unlocked_ioctl	= acq_ioctl,
+	.open		= acq_open,
+	.release	= acq_close,
+};
+
+static struct miscdevice acq_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &acq_fops,
+};
+
+/*
+ *	Init & exit routines
+ */
+
+static int __init acq_probe(struct platform_device *dev)
+{
+	int ret;
+
+	if (wdt_stop != wdt_start) {
+		if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) {
+			pr_err("I/O address 0x%04x already in use\n", wdt_stop);
+			ret = -EIO;
+			goto out;
+		}
+	}
+
+	if (!request_region(wdt_start, 1, WATCHDOG_NAME)) {
+		pr_err("I/O address 0x%04x already in use\n", wdt_start);
+		ret = -EIO;
+		goto unreg_stop;
+	}
+	ret = misc_register(&acq_miscdev);
+	if (ret != 0) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, ret);
+		goto unreg_regions;
+	}
+	pr_info("initialized. (nowayout=%d)\n", nowayout);
+
+	return 0;
+unreg_regions:
+	release_region(wdt_start, 1);
+unreg_stop:
+	if (wdt_stop != wdt_start)
+		release_region(wdt_stop, 1);
+out:
+	return ret;
+}
+
+static int acq_remove(struct platform_device *dev)
+{
+	misc_deregister(&acq_miscdev);
+	release_region(wdt_start, 1);
+	if (wdt_stop != wdt_start)
+		release_region(wdt_stop, 1);
+
+	return 0;
+}
+
+static void acq_shutdown(struct platform_device *dev)
+{
+	/* Turn the WDT off if we have a soft shutdown */
+	acq_stop();
+}
+
+static struct platform_driver acquirewdt_driver = {
+	.remove		= acq_remove,
+	.shutdown	= acq_shutdown,
+	.driver		= {
+		.name	= DRV_NAME,
+	},
+};
+
+static int __init acq_init(void)
+{
+	int err;
+
+	pr_info("WDT driver for Acquire single board computer initialising\n");
+
+	acq_platform_device = platform_device_register_simple(DRV_NAME,
+								-1, NULL, 0);
+	if (IS_ERR(acq_platform_device))
+		return PTR_ERR(acq_platform_device);
+
+	err = platform_driver_probe(&acquirewdt_driver, acq_probe);
+	if (err)
+		goto unreg_platform_device;
+	return 0;
+
+unreg_platform_device:
+	platform_device_unregister(acq_platform_device);
+	return err;
+}
+
+static void __exit acq_exit(void)
+{
+	platform_device_unregister(acq_platform_device);
+	platform_driver_unregister(&acquirewdt_driver);
+	pr_info("Watchdog Module Unloaded\n");
+}
+
+module_init(acq_init);
+module_exit(acq_exit);
+
+MODULE_AUTHOR("David Woodhouse");
+MODULE_DESCRIPTION("Acquire Inc. Single Board Computer Watchdog Timer driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c
new file mode 100644
index 000000000..f61944369
--- /dev/null
+++ b/drivers/watchdog/advantechwdt.c
@@ -0,0 +1,343 @@
+/*
+ *	Advantech Single Board Computer WDT driver
+ *
+ *	(c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
+ *
+ *	Based on acquirewdt.c which is based on wdt.c.
+ *	Original copyright messages:
+ *
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ *	warranty for any of this software. This material is provided
+ *	"AS-IS" and at no charge.
+ *
+ *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ *	14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
+ *	    Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
+ *
+ *	16-Oct-2002 Rob Radez <rob@osinvestor.com>
+ *	    Clean up ioctls, clean up init + exit, add expect close support,
+ *	    add wdt_start and wdt_stop as parameters.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+
+#define DRV_NAME "advantechwdt"
+#define WATCHDOG_NAME "Advantech WDT"
+#define WATCHDOG_TIMEOUT 60		/* 60 sec default timeout */
+
+/* the watchdog platform device */
+static struct platform_device *advwdt_platform_device;
+static unsigned long advwdt_is_open;
+static char adv_expect_close;
+
+/*
+ *	You must set these - there is no sane way to probe for this board.
+ *
+ *	To enable or restart, write the timeout value in seconds (1 to 63)
+ *	to I/O port wdt_start.  To disable, read I/O port wdt_stop.
+ *	Both are 0x443 for most boards (tested on a PCA-6276VE-00B1), but
+ *	check your manual (at least the PCA-6159 seems to be different -
+ *	the manual says wdt_stop is 0x43, not 0x443).
+ *	(0x43 is also a write-only control register for the 8254 timer!)
+ */
+
+static int wdt_stop = 0x443;
+module_param(wdt_stop, int, 0);
+MODULE_PARM_DESC(wdt_stop, "Advantech WDT 'stop' io port (default 0x443)");
+
+static int wdt_start = 0x443;
+module_param(wdt_start, int, 0);
+MODULE_PARM_DESC(wdt_start, "Advantech WDT 'start' io port (default 0x443)");
+
+static int timeout = WATCHDOG_TIMEOUT;	/* in seconds */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. 1<= timeout <=63, default="
+		__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/*
+ *	Watchdog Operations
+ */
+
+static void advwdt_ping(void)
+{
+	/* Write a watchdog value */
+	outb_p(timeout, wdt_start);
+}
+
+static void advwdt_disable(void)
+{
+	inb_p(wdt_stop);
+}
+
+static int advwdt_set_heartbeat(int t)
+{
+	if (t < 1 || t > 63)
+		return -EINVAL;
+	timeout = t;
+	return 0;
+}
+
+/*
+ *	/dev/watchdog handling
+ */
+
+static ssize_t advwdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
+{
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+
+			adv_expect_close = 0;
+
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					adv_expect_close = 42;
+			}
+		}
+		advwdt_ping();
+	}
+	return count;
+}
+
+static long advwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	int new_timeout;
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING |
+			   WDIOF_SETTIMEOUT |
+			   WDIOF_MAGICCLOSE,
+		.firmware_version = 1,
+		.identity = WATCHDOG_NAME,
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_SETOPTIONS:
+	{
+		int options, retval = -EINVAL;
+
+		if (get_user(options, p))
+			return -EFAULT;
+		if (options & WDIOS_DISABLECARD) {
+			advwdt_disable();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			advwdt_ping();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		advwdt_ping();
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		if (advwdt_set_heartbeat(new_timeout))
+			return -EINVAL;
+		advwdt_ping();
+		/* fall through */
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+static int advwdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &advwdt_is_open))
+		return -EBUSY;
+	/*
+	 *	Activate
+	 */
+
+	advwdt_ping();
+	return nonseekable_open(inode, file);
+}
+
+static int advwdt_close(struct inode *inode, struct file *file)
+{
+	if (adv_expect_close == 42) {
+		advwdt_disable();
+	} else {
+		pr_crit("Unexpected close, not stopping watchdog!\n");
+		advwdt_ping();
+	}
+	clear_bit(0, &advwdt_is_open);
+	adv_expect_close = 0;
+	return 0;
+}
+
+/*
+ *	Kernel Interfaces
+ */
+
+static const struct file_operations advwdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= advwdt_write,
+	.unlocked_ioctl	= advwdt_ioctl,
+	.open		= advwdt_open,
+	.release	= advwdt_close,
+};
+
+static struct miscdevice advwdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &advwdt_fops,
+};
+
+/*
+ *	Init & exit routines
+ */
+
+static int __init advwdt_probe(struct platform_device *dev)
+{
+	int ret;
+
+	if (wdt_stop != wdt_start) {
+		if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) {
+			pr_err("I/O address 0x%04x already in use\n",
+			       wdt_stop);
+			ret = -EIO;
+			goto out;
+		}
+	}
+
+	if (!request_region(wdt_start, 1, WATCHDOG_NAME)) {
+		pr_err("I/O address 0x%04x already in use\n", wdt_start);
+		ret = -EIO;
+		goto unreg_stop;
+	}
+
+	/* Check that the heartbeat value is within it's range ;
+	 * if not reset to the default */
+	if (advwdt_set_heartbeat(timeout)) {
+		advwdt_set_heartbeat(WATCHDOG_TIMEOUT);
+		pr_info("timeout value must be 1<=x<=63, using %d\n", timeout);
+	}
+
+	ret = misc_register(&advwdt_miscdev);
+	if (ret != 0) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, ret);
+		goto unreg_regions;
+	}
+	pr_info("initialized. timeout=%d sec (nowayout=%d)\n",
+		timeout, nowayout);
+out:
+	return ret;
+unreg_regions:
+	release_region(wdt_start, 1);
+unreg_stop:
+	if (wdt_stop != wdt_start)
+		release_region(wdt_stop, 1);
+	goto out;
+}
+
+static int advwdt_remove(struct platform_device *dev)
+{
+	misc_deregister(&advwdt_miscdev);
+	release_region(wdt_start, 1);
+	if (wdt_stop != wdt_start)
+		release_region(wdt_stop, 1);
+
+	return 0;
+}
+
+static void advwdt_shutdown(struct platform_device *dev)
+{
+	/* Turn the WDT off if we have a soft shutdown */
+	advwdt_disable();
+}
+
+static struct platform_driver advwdt_driver = {
+	.remove		= advwdt_remove,
+	.shutdown	= advwdt_shutdown,
+	.driver		= {
+		.name	= DRV_NAME,
+	},
+};
+
+static int __init advwdt_init(void)
+{
+	int err;
+
+	pr_info("WDT driver for Advantech single board computer initialising\n");
+
+	advwdt_platform_device = platform_device_register_simple(DRV_NAME,
+								-1, NULL, 0);
+	if (IS_ERR(advwdt_platform_device))
+		return PTR_ERR(advwdt_platform_device);
+
+	err = platform_driver_probe(&advwdt_driver, advwdt_probe);
+	if (err)
+		goto unreg_platform_device;
+
+	return 0;
+
+unreg_platform_device:
+	platform_device_unregister(advwdt_platform_device);
+	return err;
+}
+
+static void __exit advwdt_exit(void)
+{
+	platform_device_unregister(advwdt_platform_device);
+	platform_driver_unregister(&advwdt_driver);
+	pr_info("Watchdog Module Unloaded\n");
+}
+
+module_init(advwdt_init);
+module_exit(advwdt_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marek Michalkiewicz <marekm@linux.org.pl>");
+MODULE_DESCRIPTION("Advantech Single Board Computer WDT driver");
diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c
new file mode 100644
index 000000000..60f0c2eb8
--- /dev/null
+++ b/drivers/watchdog/alim1535_wdt.c
@@ -0,0 +1,454 @@
+/*
+ *	Watchdog for the 7101 PMU version found in the ALi M1535 chipsets
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/ioport.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/pci.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+#define WATCHDOG_NAME "ALi_M1535"
+#define WATCHDOG_TIMEOUT 60	/* 60 sec default timeout */
+
+/* internal variables */
+static unsigned long ali_is_open;
+static char ali_expect_release;
+static struct pci_dev *ali_pci;
+static u32 ali_timeout_bits;		/* stores the computed timeout */
+static DEFINE_SPINLOCK(ali_lock);	/* Guards the hardware */
+
+/* module parameters */
+static int timeout = WATCHDOG_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+		"Watchdog timeout in seconds. (0 < timeout < 18000, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/*
+ *	ali_start	-	start watchdog countdown
+ *
+ *	Starts the timer running providing the timer has a counter
+ *	configuration set.
+ */
+
+static void ali_start(void)
+{
+	u32 val;
+
+	spin_lock(&ali_lock);
+
+	pci_read_config_dword(ali_pci, 0xCC, &val);
+	val &= ~0x3F;	/* Mask count */
+	val |= (1 << 25) | ali_timeout_bits;
+	pci_write_config_dword(ali_pci, 0xCC, val);
+
+	spin_unlock(&ali_lock);
+}
+
+/*
+ *	ali_stop	-	stop the timer countdown
+ *
+ *	Stop the ALi watchdog countdown
+ */
+
+static void ali_stop(void)
+{
+	u32 val;
+
+	spin_lock(&ali_lock);
+
+	pci_read_config_dword(ali_pci, 0xCC, &val);
+	val &= ~0x3F;		/* Mask count to zero (disabled) */
+	val &= ~(1 << 25);	/* and for safety mask the reset enable */
+	pci_write_config_dword(ali_pci, 0xCC, val);
+
+	spin_unlock(&ali_lock);
+}
+
+/*
+ *	ali_keepalive	-	send a keepalive to the watchdog
+ *
+ *	Send a keepalive to the timer (actually we restart the timer).
+ */
+
+static void ali_keepalive(void)
+{
+	ali_start();
+}
+
+/*
+ *	ali_settimer	-	compute the timer reload value
+ *	@t: time in seconds
+ *
+ *	Computes the timeout values needed
+ */
+
+static int ali_settimer(int t)
+{
+	if (t < 0)
+		return -EINVAL;
+	else if (t < 60)
+		ali_timeout_bits = t|(1 << 6);
+	else if (t < 3600)
+		ali_timeout_bits = (t / 60)|(1 << 7);
+	else if (t < 18000)
+		ali_timeout_bits = (t / 300)|(1 << 6)|(1 << 7);
+	else
+		return -EINVAL;
+
+	timeout = t;
+	return 0;
+}
+
+/*
+ *	/dev/watchdog handling
+ */
+
+/*
+ *	ali_write	-	writes to ALi watchdog
+ *	@file: file from VFS
+ *	@data: user address of data
+ *	@len: length of data
+ *	@ppos: pointer to the file offset
+ *
+ *	Handle a write to the ALi watchdog. Writing to the file pings
+ *	the watchdog and resets it. Writing the magic 'V' sequence allows
+ *	the next close to turn off the watchdog.
+ */
+
+static ssize_t ali_write(struct file *file, const char __user *data,
+						size_t len, loff_t *ppos)
+{
+	/* See if we got the magic character 'V' and reload the timer */
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			/* note: just in case someone wrote the
+			   magic character five months ago... */
+			ali_expect_release = 0;
+
+			/* scan to see whether or not we got
+			   the magic character */
+			for (i = 0; i != len; i++) {
+				char c;
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					ali_expect_release = 42;
+			}
+		}
+
+		/* someone wrote to us, we should reload the timer */
+		ali_start();
+	}
+	return len;
+}
+
+/*
+ *	ali_ioctl	-	handle watchdog ioctls
+ *	@file: VFS file pointer
+ *	@cmd: ioctl number
+ *	@arg: arguments to the ioctl
+ *
+ *	Handle the watchdog ioctls supported by the ALi driver. Really
+ *	we want an extension to enable irq ack monitoring and the like
+ */
+
+static long ali_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static const struct watchdog_info ident = {
+		.options =		WDIOF_KEEPALIVEPING |
+					WDIOF_SETTIMEOUT |
+					WDIOF_MAGICCLOSE,
+		.firmware_version =	0,
+		.identity =		"ALi M1535 WatchDog Timer",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+	{
+		int new_options, retval = -EINVAL;
+
+		if (get_user(new_options, p))
+			return -EFAULT;
+		if (new_options & WDIOS_DISABLECARD) {
+			ali_stop();
+			retval = 0;
+		}
+		if (new_options & WDIOS_ENABLECARD) {
+			ali_start();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		ali_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		if (ali_settimer(new_timeout))
+			return -EINVAL;
+		ali_keepalive();
+	}
+		/* fall through */
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
+	}
+}
+
+/*
+ *	ali_open	-	handle open of ali watchdog
+ *	@inode: inode from VFS
+ *	@file: file from VFS
+ *
+ *	Open the ALi watchdog device. Ensure only one person opens it
+ *	at a time. Also start the watchdog running.
+ */
+
+static int ali_open(struct inode *inode, struct file *file)
+{
+	/* /dev/watchdog can only be opened once */
+	if (test_and_set_bit(0, &ali_is_open))
+		return -EBUSY;
+
+	/* Activate */
+	ali_start();
+	return nonseekable_open(inode, file);
+}
+
+/*
+ *	ali_release	-	close an ALi watchdog
+ *	@inode: inode from VFS
+ *	@file: file from VFS
+ *
+ *	Close the ALi watchdog device. Actual shutdown of the timer
+ *	only occurs if the magic sequence has been set.
+ */
+
+static int ali_release(struct inode *inode, struct file *file)
+{
+	/*
+	 *      Shut off the timer.
+	 */
+	if (ali_expect_release == 42)
+		ali_stop();
+	else {
+		pr_crit("Unexpected close, not stopping watchdog!\n");
+		ali_keepalive();
+	}
+	clear_bit(0, &ali_is_open);
+	ali_expect_release = 0;
+	return 0;
+}
+
+/*
+ *	ali_notify_sys	-	System down notifier
+ *
+ *	Notifier for system down
+ */
+
+
+static int ali_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		ali_stop();		/* Turn the WDT off */
+	return NOTIFY_DONE;
+}
+
+/*
+ *	Data for PCI driver interface
+ *
+ *	This data only exists for exporting the supported
+ *	PCI ids via MODULE_DEVICE_TABLE.  We do not actually
+ *	register a pci_driver, because someone else might one day
+ *	want to register another driver on the same PCI id.
+ */
+
+static const struct pci_device_id ali_pci_tbl[] __used = {
+	{ PCI_VENDOR_ID_AL, 0x1533, PCI_ANY_ID, PCI_ANY_ID,},
+	{ PCI_VENDOR_ID_AL, 0x1535, PCI_ANY_ID, PCI_ANY_ID,},
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, ali_pci_tbl);
+
+/*
+ *	ali_find_watchdog	-	find a 1535 and 7101
+ *
+ *	Scans the PCI hardware for a 1535 series bridge and matching 7101
+ *	watchdog device. This may be overtight but it is better to be safe
+ */
+
+static int __init ali_find_watchdog(void)
+{
+	struct pci_dev *pdev;
+	u32 wdog;
+
+	/* Check for a 1533/1535 series bridge */
+	pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x1535, NULL);
+	if (pdev == NULL)
+		pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x1533, NULL);
+	if (pdev == NULL)
+		return -ENODEV;
+	pci_dev_put(pdev);
+
+	/* Check for the a 7101 PMU */
+	pdev = pci_get_device(PCI_VENDOR_ID_AL, 0x7101, NULL);
+	if (pdev == NULL)
+		return -ENODEV;
+
+	if (pci_enable_device(pdev)) {
+		pci_dev_put(pdev);
+		return -EIO;
+	}
+
+	ali_pci = pdev;
+
+	/*
+	 *	Initialize the timer bits
+	 */
+	pci_read_config_dword(pdev, 0xCC, &wdog);
+
+	/* Timer bits */
+	wdog &= ~0x3F;
+	/* Issued events */
+	wdog &= ~((1 << 27)|(1 << 26)|(1 << 25)|(1 << 24));
+	/* No monitor bits */
+	wdog &= ~((1 << 16)|(1 << 13)|(1 << 12)|(1 << 11)|(1 << 10)|(1 << 9));
+
+	pci_write_config_dword(pdev, 0xCC, wdog);
+
+	return 0;
+}
+
+/*
+ *	Kernel Interfaces
+ */
+
+static const struct file_operations ali_fops = {
+	.owner		=	THIS_MODULE,
+	.llseek		=	no_llseek,
+	.write		=	ali_write,
+	.unlocked_ioctl =	ali_ioctl,
+	.open		=	ali_open,
+	.release	=	ali_release,
+};
+
+static struct miscdevice ali_miscdev = {
+	.minor =	WATCHDOG_MINOR,
+	.name =		"watchdog",
+	.fops =		&ali_fops,
+};
+
+static struct notifier_block ali_notifier = {
+	.notifier_call =	ali_notify_sys,
+};
+
+/*
+ *	watchdog_init	-	module initialiser
+ *
+ *	Scan for a suitable watchdog and if so initialize it. Return an error
+ *	if we cannot, the error causes the module to unload
+ */
+
+static int __init watchdog_init(void)
+{
+	int ret;
+
+	/* Check whether or not the hardware watchdog is there */
+	if (ali_find_watchdog() != 0)
+		return -ENODEV;
+
+	/* Check that the timeout value is within it's range;
+	   if not reset to the default */
+	if (timeout < 1 || timeout >= 18000) {
+		timeout = WATCHDOG_TIMEOUT;
+		pr_info("timeout value must be 0 < timeout < 18000, using %d\n",
+			timeout);
+	}
+
+	/* Calculate the watchdog's timeout */
+	ali_settimer(timeout);
+
+	ret = register_reboot_notifier(&ali_notifier);
+	if (ret != 0) {
+		pr_err("cannot register reboot notifier (err=%d)\n", ret);
+		goto out;
+	}
+
+	ret = misc_register(&ali_miscdev);
+	if (ret != 0) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, ret);
+		goto unreg_reboot;
+	}
+
+	pr_info("initialized. timeout=%d sec (nowayout=%d)\n",
+		timeout, nowayout);
+
+out:
+	return ret;
+unreg_reboot:
+	unregister_reboot_notifier(&ali_notifier);
+	goto out;
+}
+
+/*
+ *	watchdog_exit	-	module de-initialiser
+ *
+ *	Called while unloading a successfully installed watchdog module.
+ */
+
+static void __exit watchdog_exit(void)
+{
+	/* Stop the timer before we leave */
+	ali_stop();
+
+	/* Deregister */
+	misc_deregister(&ali_miscdev);
+	unregister_reboot_notifier(&ali_notifier);
+	pci_dev_put(ali_pci);
+}
+
+module_init(watchdog_init);
+module_exit(watchdog_exit);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("ALi M1535 PMU Watchdog Timer driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/alim7101_wdt.c b/drivers/watchdog/alim7101_wdt.c
new file mode 100644
index 000000000..12f7ea62d
--- /dev/null
+++ b/drivers/watchdog/alim7101_wdt.c
@@ -0,0 +1,449 @@
+/*
+ *	ALi M7101 PMU Computer Watchdog Timer driver
+ *
+ *	Based on w83877f_wdt.c by Scott Jennings <linuxdrivers@oro.net>
+ *	and the Cobalt kernel WDT timer driver by Tim Hockin
+ *	                                      <thockin@cobaltnet.com>
+ *
+ *	(c)2002 Steve Hill <steve@navaho.co.uk>
+ *
+ *  This WDT driver is different from most other Linux WDT
+ *  drivers in that the driver will ping the watchdog by itself,
+ *  because this particular WDT has a very short timeout (1.6
+ *  seconds) and it would be insane to count on any userspace
+ *  daemon always getting scheduled within that time frame.
+ *
+ *  Additions:
+ *   Aug 23, 2004 - Added use_gpio module parameter for use on revision a1d PMUs
+ *                  found on very old cobalt hardware.
+ *                  -- Mike Waychison <michael.waychison@sun.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/ioport.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+
+#define WDT_ENABLE 0x9C
+#define WDT_DISABLE 0x8C
+
+#define ALI_7101_WDT    0x92
+#define ALI_7101_GPIO   0x7D
+#define ALI_7101_GPIO_O 0x7E
+#define ALI_WDT_ARM     0x01
+
+/*
+ * We're going to use a 1 second timeout.
+ * If we reset the watchdog every ~250ms we should be safe.  */
+
+#define WDT_INTERVAL (HZ/4+1)
+
+/*
+ * We must not require too good response from the userspace daemon.
+ * Here we require the userspace daemon to send us a heartbeat
+ * char to /dev/watchdog every 30 seconds.
+ */
+
+#define WATCHDOG_TIMEOUT 30            /* 30 sec default timeout */
+/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */
+static int timeout = WATCHDOG_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+		"Watchdog timeout in seconds. (1<=timeout<=3600, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+
+static int use_gpio; /* Use the pic (for a1d revision alim7101) */
+module_param(use_gpio, int, 0);
+MODULE_PARM_DESC(use_gpio,
+		"Use the gpio watchdog (required by old cobalt boards).");
+
+static void wdt_timer_ping(struct timer_list *);
+static DEFINE_TIMER(timer, wdt_timer_ping);
+static unsigned long next_heartbeat;
+static unsigned long wdt_is_open;
+static char wdt_expect_close;
+static struct pci_dev *alim7101_pmu;
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/*
+ *	Whack the dog
+ */
+
+static void wdt_timer_ping(struct timer_list *unused)
+{
+	/* If we got a heartbeat pulse within the WDT_US_INTERVAL
+	 * we agree to ping the WDT
+	 */
+	char tmp;
+
+	if (time_before(jiffies, next_heartbeat)) {
+		/* Ping the WDT (this is actually a disarm/arm sequence) */
+		pci_read_config_byte(alim7101_pmu, 0x92, &tmp);
+		pci_write_config_byte(alim7101_pmu,
+					ALI_7101_WDT, (tmp & ~ALI_WDT_ARM));
+		pci_write_config_byte(alim7101_pmu,
+					ALI_7101_WDT, (tmp | ALI_WDT_ARM));
+		if (use_gpio) {
+			pci_read_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, &tmp);
+			pci_write_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, tmp | 0x20);
+			pci_write_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, tmp & ~0x20);
+		}
+	} else {
+		pr_warn("Heartbeat lost! Will not ping the watchdog\n");
+	}
+	/* Re-set the timer interval */
+	mod_timer(&timer, jiffies + WDT_INTERVAL);
+}
+
+/*
+ * Utility routines
+ */
+
+static void wdt_change(int writeval)
+{
+	char tmp;
+
+	pci_read_config_byte(alim7101_pmu, ALI_7101_WDT, &tmp);
+	if (writeval == WDT_ENABLE) {
+		pci_write_config_byte(alim7101_pmu,
+					ALI_7101_WDT, (tmp | ALI_WDT_ARM));
+		if (use_gpio) {
+			pci_read_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, &tmp);
+			pci_write_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, tmp & ~0x20);
+		}
+
+	} else {
+		pci_write_config_byte(alim7101_pmu,
+					ALI_7101_WDT, (tmp & ~ALI_WDT_ARM));
+		if (use_gpio) {
+			pci_read_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, &tmp);
+			pci_write_config_byte(alim7101_pmu,
+					ALI_7101_GPIO_O, tmp | 0x20);
+		}
+	}
+}
+
+static void wdt_startup(void)
+{
+	next_heartbeat = jiffies + (timeout * HZ);
+
+	/* We must enable before we kick off the timer in case the timer
+	   occurs as we ping it */
+
+	wdt_change(WDT_ENABLE);
+
+	/* Start the timer */
+	mod_timer(&timer, jiffies + WDT_INTERVAL);
+
+	pr_info("Watchdog timer is now enabled\n");
+}
+
+static void wdt_turnoff(void)
+{
+	/* Stop the timer */
+	del_timer_sync(&timer);
+	wdt_change(WDT_DISABLE);
+	pr_info("Watchdog timer is now disabled...\n");
+}
+
+static void wdt_keepalive(void)
+{
+	/* user land ping */
+	next_heartbeat = jiffies + (timeout * HZ);
+}
+
+/*
+ * /dev/watchdog handling
+ */
+
+static ssize_t fop_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
+{
+	/* See if we got the magic character 'V' and reload the timer */
+	if (count) {
+		if (!nowayout) {
+			size_t ofs;
+
+			/* note: just in case someone wrote the magic character
+			 * five months ago... */
+			wdt_expect_close = 0;
+
+			/* now scan */
+			for (ofs = 0; ofs != count; ofs++) {
+				char c;
+				if (get_user(c, buf + ofs))
+					return -EFAULT;
+				if (c == 'V')
+					wdt_expect_close = 42;
+			}
+		}
+		/* someone wrote to us, we should restart timer */
+		wdt_keepalive();
+	}
+	return count;
+}
+
+static int fop_open(struct inode *inode, struct file *file)
+{
+	/* Just in case we're already talking to someone... */
+	if (test_and_set_bit(0, &wdt_is_open))
+		return -EBUSY;
+	/* Good, fire up the show */
+	wdt_startup();
+	return nonseekable_open(inode, file);
+}
+
+static int fop_close(struct inode *inode, struct file *file)
+{
+	if (wdt_expect_close == 42)
+		wdt_turnoff();
+	else {
+		/* wim: shouldn't there be a: del_timer(&timer); */
+		pr_crit("device file closed unexpectedly. Will not stop the WDT!\n");
+	}
+	clear_bit(0, &wdt_is_open);
+	wdt_expect_close = 0;
+	return 0;
+}
+
+static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
+							| WDIOF_MAGICCLOSE,
+		.firmware_version = 1,
+		.identity = "ALiM7101",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+	{
+		int new_options, retval = -EINVAL;
+
+		if (get_user(new_options, p))
+			return -EFAULT;
+		if (new_options & WDIOS_DISABLECARD) {
+			wdt_turnoff();
+			retval = 0;
+		}
+		if (new_options & WDIOS_ENABLECARD) {
+			wdt_startup();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
+
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		/* arbitrary upper limit */
+		if (new_timeout < 1 || new_timeout > 3600)
+			return -EINVAL;
+		timeout = new_timeout;
+		wdt_keepalive();
+		/* Fall through */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static const struct file_operations wdt_fops = {
+	.owner		=	THIS_MODULE,
+	.llseek		=	no_llseek,
+	.write		=	fop_write,
+	.open		=	fop_open,
+	.release	=	fop_close,
+	.unlocked_ioctl	=	fop_ioctl,
+};
+
+static struct miscdevice wdt_miscdev = {
+	.minor	=	WATCHDOG_MINOR,
+	.name	=	"watchdog",
+	.fops	=	&wdt_fops,
+};
+
+static int wdt_restart_handle(struct notifier_block *this, unsigned long mode,
+			      void *cmd)
+{
+	/*
+	 * Cobalt devices have no way of rebooting themselves other
+	 * than getting the watchdog to pull reset, so we restart the
+	 * watchdog on reboot with no heartbeat.
+	 */
+	wdt_change(WDT_ENABLE);
+
+	/* loop until the watchdog fires */
+	while (true)
+		;
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block wdt_restart_handler = {
+	.notifier_call = wdt_restart_handle,
+	.priority = 128,
+};
+
+/*
+ *	Notifier for system down
+ */
+
+static int wdt_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		wdt_turnoff();
+
+	return NOTIFY_DONE;
+}
+
+/*
+ *	The WDT needs to learn about soft shutdowns in order to
+ *	turn the timebomb registers off.
+ */
+
+static struct notifier_block wdt_notifier = {
+	.notifier_call = wdt_notify_sys,
+};
+
+static void __exit alim7101_wdt_unload(void)
+{
+	wdt_turnoff();
+	/* Deregister */
+	misc_deregister(&wdt_miscdev);
+	unregister_reboot_notifier(&wdt_notifier);
+	unregister_restart_handler(&wdt_restart_handler);
+	pci_dev_put(alim7101_pmu);
+}
+
+static int __init alim7101_wdt_init(void)
+{
+	int rc = -EBUSY;
+	struct pci_dev *ali1543_south;
+	char tmp;
+
+	pr_info("Steve Hill <steve@navaho.co.uk>\n");
+	alim7101_pmu = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101,
+		NULL);
+	if (!alim7101_pmu) {
+		pr_info("ALi M7101 PMU not present - WDT not set\n");
+		return -EBUSY;
+	}
+
+	/* Set the WDT in the PMU to 1 second */
+	pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, 0x02);
+
+	ali1543_south = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533,
+		NULL);
+	if (!ali1543_south) {
+		pr_info("ALi 1543 South-Bridge not present - WDT not set\n");
+		goto err_out;
+	}
+	pci_read_config_byte(ali1543_south, 0x5e, &tmp);
+	pci_dev_put(ali1543_south);
+	if ((tmp & 0x1e) == 0x00) {
+		if (!use_gpio) {
+			pr_info("Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.\n");
+			goto err_out;
+		}
+		nowayout = 1;
+	} else if ((tmp & 0x1e) != 0x12 && (tmp & 0x1e) != 0x00) {
+		pr_info("ALi 1543 South-Bridge does not have the correct revision number (???1001?) - WDT not set\n");
+		goto err_out;
+	}
+
+	if (timeout < 1 || timeout > 3600) {
+		/* arbitrary upper limit */
+		timeout = WATCHDOG_TIMEOUT;
+		pr_info("timeout value must be 1 <= x <= 3600, using %d\n",
+			timeout);
+	}
+
+	rc = register_reboot_notifier(&wdt_notifier);
+	if (rc) {
+		pr_err("cannot register reboot notifier (err=%d)\n", rc);
+		goto err_out;
+	}
+
+	rc = register_restart_handler(&wdt_restart_handler);
+	if (rc) {
+		pr_err("cannot register restart handler (err=%d)\n", rc);
+		goto err_out_reboot;
+	}
+
+	rc = misc_register(&wdt_miscdev);
+	if (rc) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       wdt_miscdev.minor, rc);
+		goto err_out_restart;
+	}
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	pr_info("WDT driver for ALi M7101 initialised. timeout=%d sec (nowayout=%d)\n",
+		timeout, nowayout);
+	return 0;
+
+err_out_restart:
+	unregister_restart_handler(&wdt_restart_handler);
+err_out_reboot:
+	unregister_reboot_notifier(&wdt_notifier);
+err_out:
+	pci_dev_put(alim7101_pmu);
+	return rc;
+}
+
+module_init(alim7101_wdt_init);
+module_exit(alim7101_wdt_unload);
+
+static const struct pci_device_id alim7101_pci_tbl[] __used = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pci, alim7101_pci_tbl);
+
+MODULE_AUTHOR("Steve Hill");
+MODULE_DESCRIPTION("ALi M7101 PMU Computer Watchdog Timer driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c
new file mode 100644
index 000000000..ee1ab12ab
--- /dev/null
+++ b/drivers/watchdog/ar7_wdt.c
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * drivers/watchdog/ar7_wdt.c
+ *
+ * Copyright (C) 2007 Nicolas Thill <nico@openwrt.org>
+ * Copyright (c) 2005 Enrik Berkhan <Enrik.Berkhan@akk.org>
+ *
+ * Some code taken from:
+ * National Semiconductor SCx200 Watchdog support
+ * Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+
+#include <asm/addrspace.h>
+#include <asm/mach-ar7/ar7.h>
+
+#define LONGNAME "TI AR7 Watchdog Timer"
+
+MODULE_AUTHOR("Nicolas Thill <nico@openwrt.org>");
+MODULE_DESCRIPTION(LONGNAME);
+MODULE_LICENSE("GPL");
+
+static int margin = 60;
+module_param(margin, int, 0);
+MODULE_PARM_DESC(margin, "Watchdog margin in seconds");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
+
+#define READ_REG(x) readl((void __iomem *)&(x))
+#define WRITE_REG(x, v) writel((v), (void __iomem *)&(x))
+
+struct ar7_wdt {
+	u32 kick_lock;
+	u32 kick;
+	u32 change_lock;
+	u32 change;
+	u32 disable_lock;
+	u32 disable;
+	u32 prescale_lock;
+	u32 prescale;
+};
+
+static unsigned long wdt_is_open;
+static unsigned expect_close;
+static DEFINE_SPINLOCK(wdt_lock);
+
+/* XXX currently fixed, allows max margin ~68.72 secs */
+#define prescale_value 0xffff
+
+/* Resource of the WDT registers */
+static struct resource *ar7_regs_wdt;
+/* Pointer to the remapped WDT IO space */
+static struct ar7_wdt *ar7_wdt;
+
+static struct clk *vbus_clk;
+
+static void ar7_wdt_kick(u32 value)
+{
+	WRITE_REG(ar7_wdt->kick_lock, 0x5555);
+	if ((READ_REG(ar7_wdt->kick_lock) & 3) == 1) {
+		WRITE_REG(ar7_wdt->kick_lock, 0xaaaa);
+		if ((READ_REG(ar7_wdt->kick_lock) & 3) == 3) {
+			WRITE_REG(ar7_wdt->kick, value);
+			return;
+		}
+	}
+	pr_err("failed to unlock WDT kick reg\n");
+}
+
+static void ar7_wdt_prescale(u32 value)
+{
+	WRITE_REG(ar7_wdt->prescale_lock, 0x5a5a);
+	if ((READ_REG(ar7_wdt->prescale_lock) & 3) == 1) {
+		WRITE_REG(ar7_wdt->prescale_lock, 0xa5a5);
+		if ((READ_REG(ar7_wdt->prescale_lock) & 3) == 3) {
+			WRITE_REG(ar7_wdt->prescale, value);
+			return;
+		}
+	}
+	pr_err("failed to unlock WDT prescale reg\n");
+}
+
+static void ar7_wdt_change(u32 value)
+{
+	WRITE_REG(ar7_wdt->change_lock, 0x6666);
+	if ((READ_REG(ar7_wdt->change_lock) & 3) == 1) {
+		WRITE_REG(ar7_wdt->change_lock, 0xbbbb);
+		if ((READ_REG(ar7_wdt->change_lock) & 3) == 3) {
+			WRITE_REG(ar7_wdt->change, value);
+			return;
+		}
+	}
+	pr_err("failed to unlock WDT change reg\n");
+}
+
+static void ar7_wdt_disable(u32 value)
+{
+	WRITE_REG(ar7_wdt->disable_lock, 0x7777);
+	if ((READ_REG(ar7_wdt->disable_lock) & 3) == 1) {
+		WRITE_REG(ar7_wdt->disable_lock, 0xcccc);
+		if ((READ_REG(ar7_wdt->disable_lock) & 3) == 2) {
+			WRITE_REG(ar7_wdt->disable_lock, 0xdddd);
+			if ((READ_REG(ar7_wdt->disable_lock) & 3) == 3) {
+				WRITE_REG(ar7_wdt->disable, value);
+				return;
+			}
+		}
+	}
+	pr_err("failed to unlock WDT disable reg\n");
+}
+
+static void ar7_wdt_update_margin(int new_margin)
+{
+	u32 change;
+	u32 vbus_rate;
+
+	vbus_rate = clk_get_rate(vbus_clk);
+	change = new_margin * (vbus_rate / prescale_value);
+	if (change < 1)
+		change = 1;
+	if (change > 0xffff)
+		change = 0xffff;
+	ar7_wdt_change(change);
+	margin = change * prescale_value / vbus_rate;
+	pr_info("timer margin %d seconds (prescale %d, change %d, freq %d)\n",
+		margin, prescale_value, change, vbus_rate);
+}
+
+static void ar7_wdt_enable_wdt(void)
+{
+	pr_debug("enabling watchdog timer\n");
+	ar7_wdt_disable(1);
+	ar7_wdt_kick(1);
+}
+
+static void ar7_wdt_disable_wdt(void)
+{
+	pr_debug("disabling watchdog timer\n");
+	ar7_wdt_disable(0);
+}
+
+static int ar7_wdt_open(struct inode *inode, struct file *file)
+{
+	/* only allow one at a time */
+	if (test_and_set_bit(0, &wdt_is_open))
+		return -EBUSY;
+	ar7_wdt_enable_wdt();
+	expect_close = 0;
+
+	return nonseekable_open(inode, file);
+}
+
+static int ar7_wdt_release(struct inode *inode, struct file *file)
+{
+	if (!expect_close)
+		pr_warn("watchdog device closed unexpectedly, will not disable the watchdog timer\n");
+	else if (!nowayout)
+		ar7_wdt_disable_wdt();
+	clear_bit(0, &wdt_is_open);
+	return 0;
+}
+
+static ssize_t ar7_wdt_write(struct file *file, const char *data,
+			     size_t len, loff_t *ppos)
+{
+	/* check for a magic close character */
+	if (len) {
+		size_t i;
+
+		spin_lock(&wdt_lock);
+		ar7_wdt_kick(1);
+		spin_unlock(&wdt_lock);
+
+		expect_close = 0;
+		for (i = 0; i < len; ++i) {
+			char c;
+			if (get_user(c, data + i))
+				return -EFAULT;
+			if (c == 'V')
+				expect_close = 1;
+		}
+
+	}
+	return len;
+}
+
+static long ar7_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
+{
+	static const struct watchdog_info ident = {
+		.identity = LONGNAME,
+		.firmware_version = 1,
+		.options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+						WDIOF_MAGICCLOSE),
+	};
+	int new_margin;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user((struct watchdog_info *)arg, &ident,
+				sizeof(ident)))
+			return -EFAULT;
+		return 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		if (put_user(0, (int *)arg))
+			return -EFAULT;
+		return 0;
+	case WDIOC_KEEPALIVE:
+		ar7_wdt_kick(1);
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_margin, (int *)arg))
+			return -EFAULT;
+		if (new_margin < 1)
+			return -EINVAL;
+
+		spin_lock(&wdt_lock);
+		ar7_wdt_update_margin(new_margin);
+		ar7_wdt_kick(1);
+		spin_unlock(&wdt_lock);
+
+	case WDIOC_GETTIMEOUT:
+		if (put_user(margin, (int *)arg))
+			return -EFAULT;
+		return 0;
+	default:
+		return -ENOTTY;
+	}
+}
+
+static const struct file_operations ar7_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.write		= ar7_wdt_write,
+	.unlocked_ioctl	= ar7_wdt_ioctl,
+	.open		= ar7_wdt_open,
+	.release	= ar7_wdt_release,
+	.llseek		= no_llseek,
+};
+
+static struct miscdevice ar7_wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &ar7_wdt_fops,
+};
+
+static int ar7_wdt_probe(struct platform_device *pdev)
+{
+	int rc;
+
+	ar7_regs_wdt =
+		platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
+	ar7_wdt = devm_ioremap_resource(&pdev->dev, ar7_regs_wdt);
+	if (IS_ERR(ar7_wdt))
+		return PTR_ERR(ar7_wdt);
+
+	vbus_clk = clk_get(NULL, "vbus");
+	if (IS_ERR(vbus_clk)) {
+		pr_err("could not get vbus clock\n");
+		return PTR_ERR(vbus_clk);
+	}
+
+	ar7_wdt_disable_wdt();
+	ar7_wdt_prescale(prescale_value);
+	ar7_wdt_update_margin(margin);
+
+	rc = misc_register(&ar7_wdt_miscdev);
+	if (rc) {
+		pr_err("unable to register misc device\n");
+		goto out;
+	}
+	return 0;
+
+out:
+	clk_put(vbus_clk);
+	vbus_clk = NULL;
+	return rc;
+}
+
+static int ar7_wdt_remove(struct platform_device *pdev)
+{
+	misc_deregister(&ar7_wdt_miscdev);
+	clk_put(vbus_clk);
+	vbus_clk = NULL;
+	return 0;
+}
+
+static void ar7_wdt_shutdown(struct platform_device *pdev)
+{
+	if (!nowayout)
+		ar7_wdt_disable_wdt();
+}
+
+static struct platform_driver ar7_wdt_driver = {
+	.probe = ar7_wdt_probe,
+	.remove = ar7_wdt_remove,
+	.shutdown = ar7_wdt_shutdown,
+	.driver = {
+		.name = "ar7_wdt",
+	},
+};
+
+module_platform_driver(ar7_wdt_driver);
diff --git a/drivers/watchdog/asm9260_wdt.c b/drivers/watchdog/asm9260_wdt.c
new file mode 100644
index 000000000..2cf56b459
--- /dev/null
+++ b/drivers/watchdog/asm9260_wdt.c
@@ -0,0 +1,394 @@
+/*
+ * Watchdog driver for Alphascale ASM9260.
+ *
+ * Copyright (c) 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/watchdog.h>
+
+#define CLOCK_FREQ	1000000
+
+/* Watchdog Mode register */
+#define HW_WDMOD			0x00
+/* Wake interrupt. Set by HW, can't be cleared. */
+#define BM_MOD_WDINT			BIT(3)
+/* This bit set if timeout reached. Cleared by SW. */
+#define BM_MOD_WDTOF			BIT(2)
+/* HW Reset on timeout */
+#define BM_MOD_WDRESET			BIT(1)
+/* WD enable */
+#define BM_MOD_WDEN			BIT(0)
+
+/*
+ * Watchdog Timer Constant register
+ * Minimal value is 0xff, the meaning of this value
+ * depends on used clock: T = WDCLK * (0xff + 1) * 4
+ */
+#define HW_WDTC				0x04
+#define BM_WDTC_MAX(freq)		(0x7fffffff / (freq))
+
+/* Watchdog Feed register */
+#define HW_WDFEED			0x08
+
+/* Watchdog Timer Value register */
+#define HW_WDTV				0x0c
+
+#define ASM9260_WDT_DEFAULT_TIMEOUT	30
+
+enum asm9260_wdt_mode {
+	HW_RESET,
+	SW_RESET,
+	DEBUG,
+};
+
+struct asm9260_wdt_priv {
+	struct device		*dev;
+	struct watchdog_device	wdd;
+	struct clk		*clk;
+	struct clk		*clk_ahb;
+	struct reset_control	*rst;
+
+	void __iomem		*iobase;
+	int			irq;
+	unsigned long		wdt_freq;
+	enum asm9260_wdt_mode	mode;
+};
+
+static int asm9260_wdt_feed(struct watchdog_device *wdd)
+{
+	struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+	iowrite32(0xaa, priv->iobase + HW_WDFEED);
+	iowrite32(0x55, priv->iobase + HW_WDFEED);
+
+	return 0;
+}
+
+static unsigned int asm9260_wdt_gettimeleft(struct watchdog_device *wdd)
+{
+	struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd);
+	u32 counter;
+
+	counter = ioread32(priv->iobase + HW_WDTV);
+
+	return counter / priv->wdt_freq;
+}
+
+static int asm9260_wdt_updatetimeout(struct watchdog_device *wdd)
+{
+	struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd);
+	u32 counter;
+
+	counter = wdd->timeout * priv->wdt_freq;
+
+	iowrite32(counter, priv->iobase + HW_WDTC);
+
+	return 0;
+}
+
+static int asm9260_wdt_enable(struct watchdog_device *wdd)
+{
+	struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd);
+	u32 mode = 0;
+
+	if (priv->mode == HW_RESET)
+		mode = BM_MOD_WDRESET;
+
+	iowrite32(BM_MOD_WDEN | mode, priv->iobase + HW_WDMOD);
+
+	asm9260_wdt_updatetimeout(wdd);
+
+	asm9260_wdt_feed(wdd);
+
+	return 0;
+}
+
+static int asm9260_wdt_disable(struct watchdog_device *wdd)
+{
+	struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+	/* The only way to disable WD is to reset it. */
+	reset_control_assert(priv->rst);
+	reset_control_deassert(priv->rst);
+
+	return 0;
+}
+
+static int asm9260_wdt_settimeout(struct watchdog_device *wdd, unsigned int to)
+{
+	wdd->timeout = to;
+	asm9260_wdt_updatetimeout(wdd);
+
+	return 0;
+}
+
+static void asm9260_wdt_sys_reset(struct asm9260_wdt_priv *priv)
+{
+	/* init WD if it was not started */
+
+	iowrite32(BM_MOD_WDEN | BM_MOD_WDRESET, priv->iobase + HW_WDMOD);
+
+	iowrite32(0xff, priv->iobase + HW_WDTC);
+	/* first pass correct sequence */
+	asm9260_wdt_feed(&priv->wdd);
+	/*
+	 * Then write wrong pattern to the feed to trigger reset
+	 * ASAP.
+	 */
+	iowrite32(0xff, priv->iobase + HW_WDFEED);
+
+	mdelay(1000);
+}
+
+static irqreturn_t asm9260_wdt_irq(int irq, void *devid)
+{
+	struct asm9260_wdt_priv *priv = devid;
+	u32 stat;
+
+	stat = ioread32(priv->iobase + HW_WDMOD);
+	if (!(stat & BM_MOD_WDINT))
+		return IRQ_NONE;
+
+	if (priv->mode == DEBUG) {
+		dev_info(priv->dev, "Watchdog Timeout. Do nothing.\n");
+	} else {
+		dev_info(priv->dev, "Watchdog Timeout. Doing SW Reset.\n");
+		asm9260_wdt_sys_reset(priv);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int asm9260_restart(struct watchdog_device *wdd, unsigned long action,
+			   void *data)
+{
+	struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+	asm9260_wdt_sys_reset(priv);
+
+	return 0;
+}
+
+static const struct watchdog_info asm9260_wdt_ident = {
+	.options          =     WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING
+				| WDIOF_MAGICCLOSE,
+	.identity         =	"Alphascale asm9260 Watchdog",
+};
+
+static const struct watchdog_ops asm9260_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= asm9260_wdt_enable,
+	.stop		= asm9260_wdt_disable,
+	.get_timeleft	= asm9260_wdt_gettimeleft,
+	.ping		= asm9260_wdt_feed,
+	.set_timeout	= asm9260_wdt_settimeout,
+	.restart	= asm9260_restart,
+};
+
+static int asm9260_wdt_get_dt_clks(struct asm9260_wdt_priv *priv)
+{
+	int err;
+	unsigned long clk;
+
+	priv->clk = devm_clk_get(priv->dev, "mod");
+	if (IS_ERR(priv->clk)) {
+		dev_err(priv->dev, "Failed to get \"mod\" clk\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	/* configure AHB clock */
+	priv->clk_ahb = devm_clk_get(priv->dev, "ahb");
+	if (IS_ERR(priv->clk_ahb)) {
+		dev_err(priv->dev, "Failed to get \"ahb\" clk\n");
+		return PTR_ERR(priv->clk_ahb);
+	}
+
+	err = clk_prepare_enable(priv->clk_ahb);
+	if (err) {
+		dev_err(priv->dev, "Failed to enable ahb_clk!\n");
+		return err;
+	}
+
+	err = clk_set_rate(priv->clk, CLOCK_FREQ);
+	if (err) {
+		clk_disable_unprepare(priv->clk_ahb);
+		dev_err(priv->dev, "Failed to set rate!\n");
+		return err;
+	}
+
+	err = clk_prepare_enable(priv->clk);
+	if (err) {
+		clk_disable_unprepare(priv->clk_ahb);
+		dev_err(priv->dev, "Failed to enable clk!\n");
+		return err;
+	}
+
+	/* wdt has internal divider */
+	clk = clk_get_rate(priv->clk);
+	if (!clk) {
+		clk_disable_unprepare(priv->clk);
+		clk_disable_unprepare(priv->clk_ahb);
+		dev_err(priv->dev, "Failed, clk is 0!\n");
+		return -EINVAL;
+	}
+
+	priv->wdt_freq = clk / 2;
+
+	return 0;
+}
+
+static void asm9260_wdt_get_dt_mode(struct asm9260_wdt_priv *priv)
+{
+	const char *tmp;
+	int ret;
+
+	/* default mode */
+	priv->mode = HW_RESET;
+
+	ret = of_property_read_string(priv->dev->of_node,
+				      "alphascale,mode", &tmp);
+	if (ret < 0)
+		return;
+
+	if (!strcmp(tmp, "hw"))
+		priv->mode = HW_RESET;
+	else if (!strcmp(tmp, "sw"))
+		priv->mode = SW_RESET;
+	else if (!strcmp(tmp, "debug"))
+		priv->mode = DEBUG;
+	else
+		dev_warn(priv->dev, "unknown reset-type: %s. Using default \"hw\" mode.",
+			 tmp);
+}
+
+static int asm9260_wdt_probe(struct platform_device *pdev)
+{
+	struct asm9260_wdt_priv *priv;
+	struct watchdog_device *wdd;
+	struct resource *res;
+	int ret;
+	const char * const mode_name[] = { "hw", "sw", "debug", };
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct asm9260_wdt_priv),
+			    GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->iobase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->iobase))
+		return PTR_ERR(priv->iobase);
+
+	priv->rst = devm_reset_control_get_exclusive(&pdev->dev, "wdt_rst");
+	if (IS_ERR(priv->rst))
+		return PTR_ERR(priv->rst);
+
+	ret = asm9260_wdt_get_dt_clks(priv);
+	if (ret)
+		return ret;
+
+	wdd = &priv->wdd;
+	wdd->info = &asm9260_wdt_ident;
+	wdd->ops = &asm9260_wdt_ops;
+	wdd->min_timeout = 1;
+	wdd->max_timeout = BM_WDTC_MAX(priv->wdt_freq);
+	wdd->parent = &pdev->dev;
+
+	watchdog_set_drvdata(wdd, priv);
+
+	/*
+	 * If 'timeout-sec' unspecified in devicetree, assume a 30 second
+	 * default, unless the max timeout is less than 30 seconds, then use
+	 * the max instead.
+	 */
+	wdd->timeout = ASM9260_WDT_DEFAULT_TIMEOUT;
+	watchdog_init_timeout(wdd, 0, &pdev->dev);
+
+	asm9260_wdt_get_dt_mode(priv);
+
+	if (priv->mode != HW_RESET)
+		priv->irq = platform_get_irq(pdev, 0);
+
+	if (priv->irq > 0) {
+		/*
+		 * Not all supported platforms specify an interrupt for the
+		 * watchdog, so let's make it optional.
+		 */
+		ret = devm_request_irq(&pdev->dev, priv->irq,
+				       asm9260_wdt_irq, 0, pdev->name, priv);
+		if (ret < 0)
+			dev_warn(&pdev->dev, "failed to request IRQ\n");
+	}
+
+	watchdog_set_restart_priority(wdd, 128);
+
+	ret = watchdog_register_device(wdd);
+	if (ret)
+		goto clk_off;
+
+	platform_set_drvdata(pdev, priv);
+
+	dev_info(&pdev->dev, "Watchdog enabled (timeout: %d sec, mode: %s)\n",
+		 wdd->timeout, mode_name[priv->mode]);
+	return 0;
+
+clk_off:
+	clk_disable_unprepare(priv->clk);
+	clk_disable_unprepare(priv->clk_ahb);
+	return ret;
+}
+
+static void asm9260_wdt_shutdown(struct platform_device *pdev)
+{
+	struct asm9260_wdt_priv *priv = platform_get_drvdata(pdev);
+
+	asm9260_wdt_disable(&priv->wdd);
+}
+
+static int asm9260_wdt_remove(struct platform_device *pdev)
+{
+	struct asm9260_wdt_priv *priv = platform_get_drvdata(pdev);
+
+	asm9260_wdt_disable(&priv->wdd);
+
+	watchdog_unregister_device(&priv->wdd);
+
+	clk_disable_unprepare(priv->clk);
+	clk_disable_unprepare(priv->clk_ahb);
+
+	return 0;
+}
+
+static const struct of_device_id asm9260_wdt_of_match[] = {
+	{ .compatible = "alphascale,asm9260-wdt"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, asm9260_wdt_of_match);
+
+static struct platform_driver asm9260_wdt_driver = {
+	.driver = {
+		.name = "asm9260-wdt",
+		.of_match_table	= asm9260_wdt_of_match,
+	},
+	.probe = asm9260_wdt_probe,
+	.remove = asm9260_wdt_remove,
+	.shutdown = asm9260_wdt_shutdown,
+};
+module_platform_driver(asm9260_wdt_driver);
+
+MODULE_DESCRIPTION("asm9260 WatchDog Timer Driver");
+MODULE_AUTHOR("Oleksij Rempel <linux@rempel-privat.de>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
new file mode 100644
index 000000000..814041d4e
--- /dev/null
+++ b/drivers/watchdog/aspeed_wdt.c
@@ -0,0 +1,353 @@
+/*
+ * Copyright 2016 IBM Corporation
+ *
+ * Joel Stanley <joel@jms.id.au>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+struct aspeed_wdt {
+	struct watchdog_device	wdd;
+	void __iomem		*base;
+	u32			ctrl;
+};
+
+struct aspeed_wdt_config {
+	u32 ext_pulse_width_mask;
+};
+
+static const struct aspeed_wdt_config ast2400_config = {
+	.ext_pulse_width_mask = 0xff,
+};
+
+static const struct aspeed_wdt_config ast2500_config = {
+	.ext_pulse_width_mask = 0xfffff,
+};
+
+static const struct of_device_id aspeed_wdt_of_table[] = {
+	{ .compatible = "aspeed,ast2400-wdt", .data = &ast2400_config },
+	{ .compatible = "aspeed,ast2500-wdt", .data = &ast2500_config },
+	{ .compatible = "aspeed,ast2600-wdt", .data = &ast2500_config },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table);
+
+#define WDT_STATUS		0x00
+#define WDT_RELOAD_VALUE	0x04
+#define WDT_RESTART		0x08
+#define WDT_CTRL		0x0C
+#define   WDT_CTRL_BOOT_SECONDARY	BIT(7)
+#define   WDT_CTRL_RESET_MODE_SOC	(0x00 << 5)
+#define   WDT_CTRL_RESET_MODE_FULL_CHIP	(0x01 << 5)
+#define   WDT_CTRL_RESET_MODE_ARM_CPU	(0x10 << 5)
+#define   WDT_CTRL_1MHZ_CLK		BIT(4)
+#define   WDT_CTRL_WDT_EXT		BIT(3)
+#define   WDT_CTRL_WDT_INTR		BIT(2)
+#define   WDT_CTRL_RESET_SYSTEM		BIT(1)
+#define   WDT_CTRL_ENABLE		BIT(0)
+#define WDT_TIMEOUT_STATUS	0x10
+#define   WDT_TIMEOUT_STATUS_BOOT_SECONDARY	BIT(1)
+
+/*
+ * WDT_RESET_WIDTH controls the characteristics of the external pulse (if
+ * enabled), specifically:
+ *
+ * * Pulse duration
+ * * Drive mode: push-pull vs open-drain
+ * * Polarity: Active high or active low
+ *
+ * Pulse duration configuration is available on both the AST2400 and AST2500,
+ * though the field changes between SoCs:
+ *
+ * AST2400: Bits 7:0
+ * AST2500: Bits 19:0
+ *
+ * This difference is captured in struct aspeed_wdt_config.
+ *
+ * The AST2500 exposes the drive mode and polarity options, but not in a
+ * regular fashion. For read purposes, bit 31 represents active high or low,
+ * and bit 30 represents push-pull or open-drain. With respect to write, magic
+ * values need to be written to the top byte to change the state of the drive
+ * mode and polarity bits. Any other value written to the top byte has no
+ * effect on the state of the drive mode or polarity bits. However, the pulse
+ * width value must be preserved (as desired) if written.
+ */
+#define WDT_RESET_WIDTH		0x18
+#define   WDT_RESET_WIDTH_ACTIVE_HIGH	BIT(31)
+#define     WDT_ACTIVE_HIGH_MAGIC	(0xA5 << 24)
+#define     WDT_ACTIVE_LOW_MAGIC	(0x5A << 24)
+#define   WDT_RESET_WIDTH_PUSH_PULL	BIT(30)
+#define     WDT_PUSH_PULL_MAGIC		(0xA8 << 24)
+#define     WDT_OPEN_DRAIN_MAGIC	(0x8A << 24)
+
+#define WDT_RESTART_MAGIC	0x4755
+
+/* 32 bits at 1MHz, in milliseconds */
+#define WDT_MAX_TIMEOUT_MS	4294967
+#define WDT_DEFAULT_TIMEOUT	30
+#define WDT_RATE_1MHZ		1000000
+
+static struct aspeed_wdt *to_aspeed_wdt(struct watchdog_device *wdd)
+{
+	return container_of(wdd, struct aspeed_wdt, wdd);
+}
+
+static void aspeed_wdt_enable(struct aspeed_wdt *wdt, int count)
+{
+	wdt->ctrl |= WDT_CTRL_ENABLE;
+
+	writel(0, wdt->base + WDT_CTRL);
+	writel(count, wdt->base + WDT_RELOAD_VALUE);
+	writel(WDT_RESTART_MAGIC, wdt->base + WDT_RESTART);
+	writel(wdt->ctrl, wdt->base + WDT_CTRL);
+}
+
+static int aspeed_wdt_start(struct watchdog_device *wdd)
+{
+	struct aspeed_wdt *wdt = to_aspeed_wdt(wdd);
+
+	aspeed_wdt_enable(wdt, wdd->timeout * WDT_RATE_1MHZ);
+
+	return 0;
+}
+
+static int aspeed_wdt_stop(struct watchdog_device *wdd)
+{
+	struct aspeed_wdt *wdt = to_aspeed_wdt(wdd);
+
+	wdt->ctrl &= ~WDT_CTRL_ENABLE;
+	writel(wdt->ctrl, wdt->base + WDT_CTRL);
+
+	return 0;
+}
+
+static int aspeed_wdt_ping(struct watchdog_device *wdd)
+{
+	struct aspeed_wdt *wdt = to_aspeed_wdt(wdd);
+
+	writel(WDT_RESTART_MAGIC, wdt->base + WDT_RESTART);
+
+	return 0;
+}
+
+static int aspeed_wdt_set_timeout(struct watchdog_device *wdd,
+				  unsigned int timeout)
+{
+	struct aspeed_wdt *wdt = to_aspeed_wdt(wdd);
+	u32 actual;
+
+	wdd->timeout = timeout;
+
+	actual = min(timeout, wdd->max_hw_heartbeat_ms / 1000);
+
+	writel(actual * WDT_RATE_1MHZ, wdt->base + WDT_RELOAD_VALUE);
+	writel(WDT_RESTART_MAGIC, wdt->base + WDT_RESTART);
+
+	return 0;
+}
+
+static int aspeed_wdt_restart(struct watchdog_device *wdd,
+			      unsigned long action, void *data)
+{
+	struct aspeed_wdt *wdt = to_aspeed_wdt(wdd);
+
+	wdt->ctrl &= ~WDT_CTRL_BOOT_SECONDARY;
+	aspeed_wdt_enable(wdt, 128 * WDT_RATE_1MHZ / 1000);
+
+	mdelay(1000);
+
+	return 0;
+}
+
+static const struct watchdog_ops aspeed_wdt_ops = {
+	.start		= aspeed_wdt_start,
+	.stop		= aspeed_wdt_stop,
+	.ping		= aspeed_wdt_ping,
+	.set_timeout	= aspeed_wdt_set_timeout,
+	.restart	= aspeed_wdt_restart,
+	.owner		= THIS_MODULE,
+};
+
+static const struct watchdog_info aspeed_wdt_info = {
+	.options	= WDIOF_KEEPALIVEPING
+			| WDIOF_MAGICCLOSE
+			| WDIOF_SETTIMEOUT,
+	.identity	= KBUILD_MODNAME,
+};
+
+static int aspeed_wdt_probe(struct platform_device *pdev)
+{
+	const struct aspeed_wdt_config *config;
+	const struct of_device_id *ofdid;
+	struct aspeed_wdt *wdt;
+	struct resource *res;
+	struct device_node *np;
+	const char *reset_type;
+	u32 duration;
+	u32 status;
+	int ret;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(wdt->base))
+		return PTR_ERR(wdt->base);
+
+	wdt->wdd.info = &aspeed_wdt_info;
+	wdt->wdd.ops = &aspeed_wdt_ops;
+	wdt->wdd.max_hw_heartbeat_ms = WDT_MAX_TIMEOUT_MS;
+	wdt->wdd.parent = &pdev->dev;
+
+	wdt->wdd.timeout = WDT_DEFAULT_TIMEOUT;
+	watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev);
+
+	np = pdev->dev.of_node;
+
+	ofdid = of_match_node(aspeed_wdt_of_table, np);
+	if (!ofdid)
+		return -EINVAL;
+	config = ofdid->data;
+
+	/*
+	 * On clock rates:
+	 *  - ast2400 wdt can run at PCLK, or 1MHz
+	 *  - ast2500 only runs at 1MHz, hard coding bit 4 to 1
+	 *  - ast2600 always runs at 1MHz
+	 *
+	 * Set the ast2400 to run at 1MHz as it simplifies the driver.
+	 */
+	if (of_device_is_compatible(np, "aspeed,ast2400-wdt"))
+		wdt->ctrl = WDT_CTRL_1MHZ_CLK;
+
+	/*
+	 * Control reset on a per-device basis to ensure the
+	 * host is not affected by a BMC reboot
+	 */
+	ret = of_property_read_string(np, "aspeed,reset-type", &reset_type);
+	if (ret) {
+		wdt->ctrl |= WDT_CTRL_RESET_MODE_SOC | WDT_CTRL_RESET_SYSTEM;
+	} else {
+		if (!strcmp(reset_type, "cpu"))
+			wdt->ctrl |= WDT_CTRL_RESET_MODE_ARM_CPU |
+				     WDT_CTRL_RESET_SYSTEM;
+		else if (!strcmp(reset_type, "soc"))
+			wdt->ctrl |= WDT_CTRL_RESET_MODE_SOC |
+				     WDT_CTRL_RESET_SYSTEM;
+		else if (!strcmp(reset_type, "system"))
+			wdt->ctrl |= WDT_CTRL_RESET_MODE_FULL_CHIP |
+				     WDT_CTRL_RESET_SYSTEM;
+		else if (strcmp(reset_type, "none"))
+			return -EINVAL;
+	}
+	if (of_property_read_bool(np, "aspeed,external-signal"))
+		wdt->ctrl |= WDT_CTRL_WDT_EXT;
+	if (of_property_read_bool(np, "aspeed,alt-boot"))
+		wdt->ctrl |= WDT_CTRL_BOOT_SECONDARY;
+
+	if (readl(wdt->base + WDT_CTRL) & WDT_CTRL_ENABLE)  {
+		/*
+		 * The watchdog is running, but invoke aspeed_wdt_start() to
+		 * write wdt->ctrl to WDT_CTRL to ensure the watchdog's
+		 * configuration conforms to the driver's expectations.
+		 * Primarily, ensure we're using the 1MHz clock source.
+		 */
+		aspeed_wdt_start(&wdt->wdd);
+		set_bit(WDOG_HW_RUNNING, &wdt->wdd.status);
+	}
+
+	if ((of_device_is_compatible(np, "aspeed,ast2500-wdt")) ||
+		(of_device_is_compatible(np, "aspeed,ast2600-wdt"))) {
+		u32 reg = readl(wdt->base + WDT_RESET_WIDTH);
+
+		reg &= config->ext_pulse_width_mask;
+		if (of_property_read_bool(np, "aspeed,ext-push-pull"))
+			reg |= WDT_PUSH_PULL_MAGIC;
+		else
+			reg |= WDT_OPEN_DRAIN_MAGIC;
+
+		writel(reg, wdt->base + WDT_RESET_WIDTH);
+
+		reg &= config->ext_pulse_width_mask;
+		if (of_property_read_bool(np, "aspeed,ext-active-high"))
+			reg |= WDT_ACTIVE_HIGH_MAGIC;
+		else
+			reg |= WDT_ACTIVE_LOW_MAGIC;
+
+		writel(reg, wdt->base + WDT_RESET_WIDTH);
+	}
+
+	if (!of_property_read_u32(np, "aspeed,ext-pulse-duration", &duration)) {
+		u32 max_duration = config->ext_pulse_width_mask + 1;
+
+		if (duration == 0 || duration > max_duration) {
+			dev_err(&pdev->dev, "Invalid pulse duration: %uus\n",
+					duration);
+			duration = max(1U, min(max_duration, duration));
+			dev_info(&pdev->dev, "Pulse duration set to %uus\n",
+					duration);
+		}
+
+		/*
+		 * The watchdog is always configured with a 1MHz source, so
+		 * there is no need to scale the microsecond value. However we
+		 * need to offset it - from the datasheet:
+		 *
+		 * "This register decides the asserting duration of wdt_ext and
+		 * wdt_rstarm signal. The default value is 0xFF. It means the
+		 * default asserting duration of wdt_ext and wdt_rstarm is
+		 * 256us."
+		 *
+		 * This implies a value of 0 gives a 1us pulse.
+		 */
+		writel(duration - 1, wdt->base + WDT_RESET_WIDTH);
+	}
+
+	status = readl(wdt->base + WDT_TIMEOUT_STATUS);
+	if (status & WDT_TIMEOUT_STATUS_BOOT_SECONDARY)
+		wdt->wdd.bootstatus = WDIOF_CARDRESET;
+
+	ret = devm_watchdog_register_device(&pdev->dev, &wdt->wdd);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver aspeed_watchdog_driver = {
+	.probe = aspeed_wdt_probe,
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = of_match_ptr(aspeed_wdt_of_table),
+	},
+};
+
+static int __init aspeed_wdt_init(void)
+{
+	return platform_driver_register(&aspeed_watchdog_driver);
+}
+arch_initcall(aspeed_wdt_init);
+
+static void __exit aspeed_wdt_exit(void)
+{
+	platform_driver_unregister(&aspeed_watchdog_driver);
+}
+module_exit(aspeed_wdt_exit);
+
+MODULE_DESCRIPTION("Aspeed Watchdog Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
new file mode 100644
index 000000000..b45fc0aee
--- /dev/null
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -0,0 +1,342 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Watchdog driver for Atmel AT91RM9200 (Thunder)
+ *
+ *  Copyright (C) 2003 SAN People (Pty) Ltd
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-st.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <linux/uaccess.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#define WDT_DEFAULT_TIME	5	/* seconds */
+#define WDT_MAX_TIME		256	/* seconds */
+
+static int wdt_time = WDT_DEFAULT_TIME;
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static struct regmap *regmap_st;
+
+module_param(wdt_time, int, 0);
+MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
+				__MODULE_STRING(WDT_DEFAULT_TIME) ")");
+
+#ifdef CONFIG_WATCHDOG_NOWAYOUT
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+#endif
+
+
+static unsigned long at91wdt_busy;
+
+/* ......................................................................... */
+
+static int at91rm9200_restart(struct notifier_block *this,
+					unsigned long mode, void *cmd)
+{
+	/*
+	 * Perform a hardware reset with the use of the Watchdog timer.
+	 */
+	regmap_write(regmap_st, AT91_ST_WDMR,
+		     AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
+	regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
+
+	mdelay(2000);
+
+	pr_emerg("Unable to restart system\n");
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block at91rm9200_restart_nb = {
+	.notifier_call = at91rm9200_restart,
+	.priority = 192,
+};
+
+/*
+ * Disable the watchdog.
+ */
+static inline void at91_wdt_stop(void)
+{
+	regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN);
+}
+
+/*
+ * Enable and reset the watchdog.
+ */
+static inline void at91_wdt_start(void)
+{
+	regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
+				(((65536 * wdt_time) >> 8) & AT91_ST_WDV));
+	regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
+}
+
+/*
+ * Reload the watchdog timer.  (ie, pat the watchdog)
+ */
+static inline void at91_wdt_reload(void)
+{
+	regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
+}
+
+/* ......................................................................... */
+
+/*
+ * Watchdog device is opened, and watchdog starts running.
+ */
+static int at91_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &at91wdt_busy))
+		return -EBUSY;
+
+	at91_wdt_start();
+	return nonseekable_open(inode, file);
+}
+
+/*
+ * Close the watchdog device.
+ * If CONFIG_WATCHDOG_NOWAYOUT is NOT defined then the watchdog is also
+ *  disabled.
+ */
+static int at91_wdt_close(struct inode *inode, struct file *file)
+{
+	/* Disable the watchdog when file is closed */
+	if (!nowayout)
+		at91_wdt_stop();
+
+	clear_bit(0, &at91wdt_busy);
+	return 0;
+}
+
+/*
+ * Change the watchdog time interval.
+ */
+static int at91_wdt_settimeout(int new_time)
+{
+	/*
+	 * All counting occurs at SLOW_CLOCK / 128 = 256 Hz
+	 *
+	 * Since WDV is a 16-bit counter, the maximum period is
+	 * 65536 / 256 = 256 seconds.
+	 */
+	if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
+		return -EINVAL;
+
+	/* Set new watchdog time. It will be used when
+	   at91_wdt_start() is called. */
+	wdt_time = new_time;
+	return 0;
+}
+
+static const struct watchdog_info at91_wdt_info = {
+	.identity	= "at91 watchdog",
+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+};
+
+/*
+ * Handle commands from user-space.
+ */
+static long at91_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int new_value;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &at91_wdt_info,
+				sizeof(at91_wdt_info)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+		if (get_user(new_value, p))
+			return -EFAULT;
+		if (new_value & WDIOS_DISABLECARD)
+			at91_wdt_stop();
+		if (new_value & WDIOS_ENABLECARD)
+			at91_wdt_start();
+		return 0;
+	case WDIOC_KEEPALIVE:
+		at91_wdt_reload();	/* pat the watchdog */
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_value, p))
+			return -EFAULT;
+		if (at91_wdt_settimeout(new_value))
+			return -EINVAL;
+		/* Enable new time value */
+		at91_wdt_start();
+		/* Return current value */
+		return put_user(wdt_time, p);
+	case WDIOC_GETTIMEOUT:
+		return put_user(wdt_time, p);
+	default:
+		return -ENOTTY;
+	}
+}
+
+/*
+ * Pat the watchdog whenever device is written to.
+ */
+static ssize_t at91_wdt_write(struct file *file, const char *data,
+						size_t len, loff_t *ppos)
+{
+	at91_wdt_reload();		/* pat the watchdog */
+	return len;
+}
+
+/* ......................................................................... */
+
+static const struct file_operations at91wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.unlocked_ioctl	= at91_wdt_ioctl,
+	.open		= at91_wdt_open,
+	.release	= at91_wdt_close,
+	.write		= at91_wdt_write,
+};
+
+static struct miscdevice at91wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &at91wdt_fops,
+};
+
+static int at91wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device *parent;
+	int res;
+
+	if (at91wdt_miscdev.parent)
+		return -EBUSY;
+	at91wdt_miscdev.parent = &pdev->dev;
+
+	parent = dev->parent;
+	if (!parent) {
+		dev_err(dev, "no parent\n");
+		return -ENODEV;
+	}
+
+	regmap_st = syscon_node_to_regmap(parent->of_node);
+	if (IS_ERR(regmap_st))
+		return -ENODEV;
+
+	res = misc_register(&at91wdt_miscdev);
+	if (res)
+		return res;
+
+	res = register_restart_handler(&at91rm9200_restart_nb);
+	if (res)
+		dev_warn(dev, "failed to register restart handler\n");
+
+	pr_info("AT91 Watchdog Timer enabled (%d seconds%s)\n",
+		wdt_time, nowayout ? ", nowayout" : "");
+	return 0;
+}
+
+static int at91wdt_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int res;
+
+	res = unregister_restart_handler(&at91rm9200_restart_nb);
+	if (res)
+		dev_warn(dev, "failed to unregister restart handler\n");
+
+	misc_deregister(&at91wdt_miscdev);
+	at91wdt_miscdev.parent = NULL;
+
+	return res;
+}
+
+static void at91wdt_shutdown(struct platform_device *pdev)
+{
+	at91_wdt_stop();
+}
+
+#ifdef CONFIG_PM
+
+static int at91wdt_suspend(struct platform_device *pdev, pm_message_t message)
+{
+	at91_wdt_stop();
+	return 0;
+}
+
+static int at91wdt_resume(struct platform_device *pdev)
+{
+	if (at91wdt_busy)
+		at91_wdt_start();
+	return 0;
+}
+
+#else
+#define at91wdt_suspend NULL
+#define at91wdt_resume	NULL
+#endif
+
+static const struct of_device_id at91_wdt_dt_ids[] = {
+	{ .compatible = "atmel,at91rm9200-wdt" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, at91_wdt_dt_ids);
+
+static struct platform_driver at91wdt_driver = {
+	.probe		= at91wdt_probe,
+	.remove		= at91wdt_remove,
+	.shutdown	= at91wdt_shutdown,
+	.suspend	= at91wdt_suspend,
+	.resume		= at91wdt_resume,
+	.driver		= {
+		.name	= "atmel_st_watchdog",
+		.of_match_table = at91_wdt_dt_ids,
+	},
+};
+
+static int __init at91_wdt_init(void)
+{
+	/* Check that the heartbeat value is within range;
+	   if not reset to the default */
+	if (at91_wdt_settimeout(wdt_time)) {
+		at91_wdt_settimeout(WDT_DEFAULT_TIME);
+		pr_info("wdt_time value must be 1 <= wdt_time <= 256, using %d\n",
+			wdt_time);
+	}
+
+	return platform_driver_register(&at91wdt_driver);
+}
+
+static void __exit at91_wdt_exit(void)
+{
+	platform_driver_unregister(&at91wdt_driver);
+}
+
+module_init(at91_wdt_init);
+module_exit(at91_wdt_exit);
+
+MODULE_AUTHOR("Andrew Victor");
+MODULE_DESCRIPTION("Watchdog driver for Atmel AT91RM9200");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:atmel_st_watchdog");
diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
new file mode 100644
index 000000000..f4050a229
--- /dev/null
+++ b/drivers/watchdog/at91sam9_wdt.c
@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Watchdog driver for Atmel AT91SAM9x processors.
+ *
+ * Copyright (C) 2008 Renaud CERRATO r.cerrato@til-technologies.fr
+ *
+ */
+
+/*
+ * The Watchdog Timer Mode Register can be only written to once. If the
+ * timeout need to be set from Linux, be sure that the bootstrap or the
+ * bootloader doesn't write to this register.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
+#include <linux/bitops.h>
+#include <linux/uaccess.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+
+#include "at91sam9_wdt.h"
+
+#define DRV_NAME "AT91SAM9 Watchdog"
+
+#define wdt_read(wdt, field) \
+	readl_relaxed((wdt)->base + (field))
+#define wdt_write(wtd, field, val) \
+	writel_relaxed((val), (wdt)->base + (field))
+
+/* AT91SAM9 watchdog runs a 12bit counter @ 256Hz,
+ * use this to convert a watchdog
+ * value from/to milliseconds.
+ */
+#define ticks_to_hz_rounddown(t)	((((t) + 1) * HZ) >> 8)
+#define ticks_to_hz_roundup(t)		(((((t) + 1) * HZ) + 255) >> 8)
+#define ticks_to_secs(t)		(((t) + 1) >> 8)
+#define secs_to_ticks(s)		((s) ? (((s) << 8) - 1) : 0)
+
+#define WDT_MR_RESET	0x3FFF2FFF
+
+/* Watchdog max counter value in ticks */
+#define WDT_COUNTER_MAX_TICKS	0xFFF
+
+/* Watchdog max delta/value in secs */
+#define WDT_COUNTER_MAX_SECS	ticks_to_secs(WDT_COUNTER_MAX_TICKS)
+
+/* Hardware timeout in seconds */
+#define WDT_HW_TIMEOUT 2
+
+/* Timer heartbeat (500ms) */
+#define WDT_TIMEOUT	(HZ/2)
+
+/* User land timeout */
+#define WDT_HEARTBEAT 15
+static int heartbeat;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
+	"(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+	"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+#define to_wdt(wdd) container_of(wdd, struct at91wdt, wdd)
+struct at91wdt {
+	struct watchdog_device wdd;
+	void __iomem *base;
+	unsigned long next_heartbeat;	/* the next_heartbeat for the timer */
+	struct timer_list timer;	/* The timer that pings the watchdog */
+	u32 mr;
+	u32 mr_mask;
+	unsigned long heartbeat;	/* WDT heartbeat in jiffies */
+	bool nowayout;
+	unsigned int irq;
+	struct clk *sclk;
+};
+
+/* ......................................................................... */
+
+static irqreturn_t wdt_interrupt(int irq, void *dev_id)
+{
+	struct at91wdt *wdt = (struct at91wdt *)dev_id;
+
+	if (wdt_read(wdt, AT91_WDT_SR)) {
+		pr_crit("at91sam9 WDT software reset\n");
+		emergency_restart();
+		pr_crit("Reboot didn't ?????\n");
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Reload the watchdog timer.  (ie, pat the watchdog)
+ */
+static inline void at91_wdt_reset(struct at91wdt *wdt)
+{
+	wdt_write(wdt, AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT);
+}
+
+/*
+ * Timer tick
+ */
+static void at91_ping(struct timer_list *t)
+{
+	struct at91wdt *wdt = from_timer(wdt, t, timer);
+	if (time_before(jiffies, wdt->next_heartbeat) ||
+	    !watchdog_active(&wdt->wdd)) {
+		at91_wdt_reset(wdt);
+		mod_timer(&wdt->timer, jiffies + wdt->heartbeat);
+	} else {
+		pr_crit("I will reset your machine !\n");
+	}
+}
+
+static int at91_wdt_start(struct watchdog_device *wdd)
+{
+	struct at91wdt *wdt = to_wdt(wdd);
+	/* calculate when the next userspace timeout will be */
+	wdt->next_heartbeat = jiffies + wdd->timeout * HZ;
+	return 0;
+}
+
+static int at91_wdt_stop(struct watchdog_device *wdd)
+{
+	/* The watchdog timer hardware can not be stopped... */
+	return 0;
+}
+
+static int at91_wdt_set_timeout(struct watchdog_device *wdd, unsigned int new_timeout)
+{
+	wdd->timeout = new_timeout;
+	return at91_wdt_start(wdd);
+}
+
+static int at91_wdt_init(struct platform_device *pdev, struct at91wdt *wdt)
+{
+	u32 tmp;
+	u32 delta;
+	u32 value;
+	int err;
+	u32 mask = wdt->mr_mask;
+	unsigned long min_heartbeat = 1;
+	unsigned long max_heartbeat;
+	struct device *dev = &pdev->dev;
+
+	tmp = wdt_read(wdt, AT91_WDT_MR);
+	if ((tmp & mask) != (wdt->mr & mask)) {
+		if (tmp == WDT_MR_RESET) {
+			wdt_write(wdt, AT91_WDT_MR, wdt->mr);
+			tmp = wdt_read(wdt, AT91_WDT_MR);
+		}
+	}
+
+	if (tmp & AT91_WDT_WDDIS) {
+		if (wdt->mr & AT91_WDT_WDDIS)
+			return 0;
+		dev_err(dev, "watchdog is disabled\n");
+		return -EINVAL;
+	}
+
+	value = tmp & AT91_WDT_WDV;
+	delta = (tmp & AT91_WDT_WDD) >> 16;
+
+	if (delta < value)
+		min_heartbeat = ticks_to_hz_roundup(value - delta);
+
+	max_heartbeat = ticks_to_hz_rounddown(value);
+	if (!max_heartbeat) {
+		dev_err(dev,
+			"heartbeat is too small for the system to handle it correctly\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Try to reset the watchdog counter 4 or 2 times more often than
+	 * actually requested, to avoid spurious watchdog reset.
+	 * If this is not possible because of the min_heartbeat value, reset
+	 * it at the min_heartbeat period.
+	 */
+	if ((max_heartbeat / 4) >= min_heartbeat)
+		wdt->heartbeat = max_heartbeat / 4;
+	else if ((max_heartbeat / 2) >= min_heartbeat)
+		wdt->heartbeat = max_heartbeat / 2;
+	else
+		wdt->heartbeat = min_heartbeat;
+
+	if (max_heartbeat < min_heartbeat + 4)
+		dev_warn(dev,
+			 "min heartbeat and max heartbeat might be too close for the system to handle it correctly\n");
+
+	if ((tmp & AT91_WDT_WDFIEN) && wdt->irq) {
+		err = request_irq(wdt->irq, wdt_interrupt,
+				  IRQF_SHARED | IRQF_IRQPOLL |
+				  IRQF_NO_SUSPEND,
+				  pdev->name, wdt);
+		if (err)
+			return err;
+	}
+
+	if ((tmp & wdt->mr_mask) != (wdt->mr & wdt->mr_mask))
+		dev_warn(dev,
+			 "watchdog already configured differently (mr = %x expecting %x)\n",
+			 tmp & wdt->mr_mask, wdt->mr & wdt->mr_mask);
+
+	timer_setup(&wdt->timer, at91_ping, 0);
+
+	/*
+	 * Use min_heartbeat the first time to avoid spurious watchdog reset:
+	 * we don't know for how long the watchdog counter is running, and
+	 *  - resetting it right now might trigger a watchdog fault reset
+	 *  - waiting for heartbeat time might lead to a watchdog timeout
+	 *    reset
+	 */
+	mod_timer(&wdt->timer, jiffies + min_heartbeat);
+
+	/* Try to set timeout from device tree first */
+	if (watchdog_init_timeout(&wdt->wdd, 0, dev))
+		watchdog_init_timeout(&wdt->wdd, heartbeat, dev);
+	watchdog_set_nowayout(&wdt->wdd, wdt->nowayout);
+	err = watchdog_register_device(&wdt->wdd);
+	if (err)
+		goto out_stop_timer;
+
+	wdt->next_heartbeat = jiffies + wdt->wdd.timeout * HZ;
+
+	return 0;
+
+out_stop_timer:
+	del_timer(&wdt->timer);
+	return err;
+}
+
+/* ......................................................................... */
+
+static const struct watchdog_info at91_wdt_info = {
+	.identity	= DRV_NAME,
+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+						WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops at91_wdt_ops = {
+	.owner =	THIS_MODULE,
+	.start =	at91_wdt_start,
+	.stop =		at91_wdt_stop,
+	.set_timeout =	at91_wdt_set_timeout,
+};
+
+#if defined(CONFIG_OF)
+static int of_at91wdt_init(struct device_node *np, struct at91wdt *wdt)
+{
+	u32 min = 0;
+	u32 max = WDT_COUNTER_MAX_SECS;
+	const char *tmp;
+
+	/* Get the interrupts property */
+	wdt->irq = irq_of_parse_and_map(np, 0);
+	if (!wdt->irq)
+		dev_warn(wdt->wdd.parent, "failed to get IRQ from DT\n");
+
+	if (!of_property_read_u32_index(np, "atmel,max-heartbeat-sec", 0,
+					&max)) {
+		if (!max || max > WDT_COUNTER_MAX_SECS)
+			max = WDT_COUNTER_MAX_SECS;
+
+		if (!of_property_read_u32_index(np, "atmel,min-heartbeat-sec",
+						0, &min)) {
+			if (min >= max)
+				min = max - 1;
+		}
+	}
+
+	min = secs_to_ticks(min);
+	max = secs_to_ticks(max);
+
+	wdt->mr_mask = 0x3FFFFFFF;
+	wdt->mr = 0;
+	if (!of_property_read_string(np, "atmel,watchdog-type", &tmp) &&
+	    !strcmp(tmp, "software")) {
+		wdt->mr |= AT91_WDT_WDFIEN;
+		wdt->mr_mask &= ~AT91_WDT_WDRPROC;
+	} else {
+		wdt->mr |= AT91_WDT_WDRSTEN;
+	}
+
+	if (!of_property_read_string(np, "atmel,reset-type", &tmp) &&
+	    !strcmp(tmp, "proc"))
+		wdt->mr |= AT91_WDT_WDRPROC;
+
+	if (of_property_read_bool(np, "atmel,disable")) {
+		wdt->mr |= AT91_WDT_WDDIS;
+		wdt->mr_mask &= AT91_WDT_WDDIS;
+	}
+
+	if (of_property_read_bool(np, "atmel,idle-halt"))
+		wdt->mr |= AT91_WDT_WDIDLEHLT;
+
+	if (of_property_read_bool(np, "atmel,dbg-halt"))
+		wdt->mr |= AT91_WDT_WDDBGHLT;
+
+	wdt->mr |= max | ((max - min) << 16);
+
+	return 0;
+}
+#else
+static inline int of_at91wdt_init(struct device_node *np, struct at91wdt *wdt)
+{
+	return 0;
+}
+#endif
+
+static int __init at91wdt_probe(struct platform_device *pdev)
+{
+	struct resource	*r;
+	int err;
+	struct at91wdt *wdt;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdt->mr = (WDT_HW_TIMEOUT * 256) | AT91_WDT_WDRSTEN | AT91_WDT_WDD |
+		  AT91_WDT_WDDBGHLT | AT91_WDT_WDIDLEHLT;
+	wdt->mr_mask = 0x3FFFFFFF;
+	wdt->nowayout = nowayout;
+	wdt->wdd.parent = &pdev->dev;
+	wdt->wdd.info = &at91_wdt_info;
+	wdt->wdd.ops = &at91_wdt_ops;
+	wdt->wdd.timeout = WDT_HEARTBEAT;
+	wdt->wdd.min_timeout = 1;
+	wdt->wdd.max_timeout = 0xFFFF;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(wdt->base))
+		return PTR_ERR(wdt->base);
+
+	wdt->sclk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(wdt->sclk))
+		return PTR_ERR(wdt->sclk);
+
+	err = clk_prepare_enable(wdt->sclk);
+	if (err) {
+		dev_err(&pdev->dev, "Could not enable slow clock\n");
+		return err;
+	}
+
+	if (pdev->dev.of_node) {
+		err = of_at91wdt_init(pdev->dev.of_node, wdt);
+		if (err)
+			goto err_clk;
+	}
+
+	err = at91_wdt_init(pdev, wdt);
+	if (err)
+		goto err_clk;
+
+	platform_set_drvdata(pdev, wdt);
+
+	pr_info("enabled (heartbeat=%d sec, nowayout=%d)\n",
+		wdt->wdd.timeout, wdt->nowayout);
+
+	return 0;
+
+err_clk:
+	clk_disable_unprepare(wdt->sclk);
+
+	return err;
+}
+
+static int __exit at91wdt_remove(struct platform_device *pdev)
+{
+	struct at91wdt *wdt = platform_get_drvdata(pdev);
+	watchdog_unregister_device(&wdt->wdd);
+
+	pr_warn("I quit now, hardware will probably reboot!\n");
+	del_timer(&wdt->timer);
+	clk_disable_unprepare(wdt->sclk);
+
+	return 0;
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id at91_wdt_dt_ids[] = {
+	{ .compatible = "atmel,at91sam9260-wdt" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, at91_wdt_dt_ids);
+#endif
+
+static struct platform_driver at91wdt_driver = {
+	.remove		= __exit_p(at91wdt_remove),
+	.driver		= {
+		.name	= "at91_wdt",
+		.of_match_table = of_match_ptr(at91_wdt_dt_ids),
+	},
+};
+
+module_platform_driver_probe(at91wdt_driver, at91wdt_probe);
+
+MODULE_AUTHOR("Renaud CERRATO <r.cerrato@til-technologies.fr>");
+MODULE_DESCRIPTION("Watchdog driver for Atmel AT91SAM9x processors");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/at91sam9_wdt.h b/drivers/watchdog/at91sam9_wdt.h
new file mode 100644
index 000000000..390941c65
--- /dev/null
+++ b/drivers/watchdog/at91sam9_wdt.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * drivers/watchdog/at91sam9_wdt.h
+ *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * Watchdog Timer (WDT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ */
+
+#ifndef AT91_WDT_H
+#define AT91_WDT_H
+
+#define AT91_WDT_CR		0x00			/* Watchdog Control Register */
+#define		AT91_WDT_WDRSTT		(1    << 0)		/* Restart */
+#define		AT91_WDT_KEY		(0xa5 << 24)		/* KEY Password */
+
+#define AT91_WDT_MR		0x04			/* Watchdog Mode Register */
+#define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
+#define			AT91_WDT_SET_WDV(x)	((x) & AT91_WDT_WDV)
+#define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
+#define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
+#define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
+#define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
+#define		AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
+#define			AT91_WDT_SET_WDD(x)	(((x) << 16) & AT91_WDT_WDD)
+#define		AT91_WDT_WDDBGHLT	(1     << 28)		/* Debug Halt */
+#define		AT91_WDT_WDIDLEHLT	(1     << 29)		/* Idle Halt */
+
+#define AT91_WDT_SR		0x08			/* Watchdog Status Register */
+#define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
+#define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
+
+#endif
diff --git a/drivers/watchdog/ath79_wdt.c b/drivers/watchdog/ath79_wdt.c
new file mode 100644
index 000000000..e2209bf5f
--- /dev/null
+++ b/drivers/watchdog/ath79_wdt.c
@@ -0,0 +1,340 @@
+/*
+ * Atheros AR71XX/AR724X/AR913X built-in hardware watchdog timer.
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This driver was based on: drivers/watchdog/ixp4xx_wdt.c
+ *	Author: Deepak Saxena <dsaxena@plexity.net>
+ *	Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * which again was based on sa1100 driver,
+ *	Copyright (C) 2000 Oleg Drokin <green@crimea.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/uaccess.h>
+
+#define DRIVER_NAME	"ath79-wdt"
+
+#define WDT_TIMEOUT	15	/* seconds */
+
+#define WDOG_REG_CTRL		0x00
+#define WDOG_REG_TIMER		0x04
+
+#define WDOG_CTRL_LAST_RESET	BIT(31)
+#define WDOG_CTRL_ACTION_MASK	3
+#define WDOG_CTRL_ACTION_NONE	0	/* no action */
+#define WDOG_CTRL_ACTION_GPI	1	/* general purpose interrupt */
+#define WDOG_CTRL_ACTION_NMI	2	/* NMI */
+#define WDOG_CTRL_ACTION_FCR	3	/* full chip reset */
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+			   "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int timeout = WDT_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds "
+			  "(default=" __MODULE_STRING(WDT_TIMEOUT) "s)");
+
+static unsigned long wdt_flags;
+
+#define WDT_FLAGS_BUSY		0
+#define WDT_FLAGS_EXPECT_CLOSE	1
+
+static struct clk *wdt_clk;
+static unsigned long wdt_freq;
+static int boot_status;
+static int max_timeout;
+static void __iomem *wdt_base;
+
+static inline void ath79_wdt_wr(unsigned reg, u32 val)
+{
+	iowrite32(val, wdt_base + reg);
+}
+
+static inline u32 ath79_wdt_rr(unsigned reg)
+{
+	return ioread32(wdt_base + reg);
+}
+
+static inline void ath79_wdt_keepalive(void)
+{
+	ath79_wdt_wr(WDOG_REG_TIMER, wdt_freq * timeout);
+	/* flush write */
+	ath79_wdt_rr(WDOG_REG_TIMER);
+}
+
+static inline void ath79_wdt_enable(void)
+{
+	ath79_wdt_keepalive();
+
+	/*
+	 * Updating the TIMER register requires a few microseconds
+	 * on the AR934x SoCs at least. Use a small delay to ensure
+	 * that the TIMER register is updated within the hardware
+	 * before enabling the watchdog.
+	 */
+	udelay(2);
+
+	ath79_wdt_wr(WDOG_REG_CTRL, WDOG_CTRL_ACTION_FCR);
+	/* flush write */
+	ath79_wdt_rr(WDOG_REG_CTRL);
+}
+
+static inline void ath79_wdt_disable(void)
+{
+	ath79_wdt_wr(WDOG_REG_CTRL, WDOG_CTRL_ACTION_NONE);
+	/* flush write */
+	ath79_wdt_rr(WDOG_REG_CTRL);
+}
+
+static int ath79_wdt_set_timeout(int val)
+{
+	if (val < 1 || val > max_timeout)
+		return -EINVAL;
+
+	timeout = val;
+	ath79_wdt_keepalive();
+
+	return 0;
+}
+
+static int ath79_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(WDT_FLAGS_BUSY, &wdt_flags))
+		return -EBUSY;
+
+	clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags);
+	ath79_wdt_enable();
+
+	return nonseekable_open(inode, file);
+}
+
+static int ath79_wdt_release(struct inode *inode, struct file *file)
+{
+	if (test_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags))
+		ath79_wdt_disable();
+	else {
+		pr_crit("device closed unexpectedly, watchdog timer will not stop!\n");
+		ath79_wdt_keepalive();
+	}
+
+	clear_bit(WDT_FLAGS_BUSY, &wdt_flags);
+	clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags);
+
+	return 0;
+}
+
+static ssize_t ath79_wdt_write(struct file *file, const char *data,
+				size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			clear_bit(WDT_FLAGS_EXPECT_CLOSE, &wdt_flags);
+
+			for (i = 0; i != len; i++) {
+				char c;
+
+				if (get_user(c, data + i))
+					return -EFAULT;
+
+				if (c == 'V')
+					set_bit(WDT_FLAGS_EXPECT_CLOSE,
+						&wdt_flags);
+			}
+		}
+
+		ath79_wdt_keepalive();
+	}
+
+	return len;
+}
+
+static const struct watchdog_info ath79_wdt_info = {
+	.options		= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+				  WDIOF_MAGICCLOSE | WDIOF_CARDRESET,
+	.firmware_version	= 0,
+	.identity		= "ATH79 watchdog",
+};
+
+static long ath79_wdt_ioctl(struct file *file, unsigned int cmd,
+			    unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int err;
+	int t;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		err = copy_to_user(argp, &ath79_wdt_info,
+				   sizeof(ath79_wdt_info)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETSTATUS:
+		err = put_user(0, p);
+		break;
+
+	case WDIOC_GETBOOTSTATUS:
+		err = put_user(boot_status, p);
+		break;
+
+	case WDIOC_KEEPALIVE:
+		ath79_wdt_keepalive();
+		err = 0;
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		err = get_user(t, p);
+		if (err)
+			break;
+
+		err = ath79_wdt_set_timeout(t);
+		if (err)
+			break;
+
+		/* fallthrough */
+	case WDIOC_GETTIMEOUT:
+		err = put_user(timeout, p);
+		break;
+
+	default:
+		err = -ENOTTY;
+		break;
+	}
+
+	return err;
+}
+
+static const struct file_operations ath79_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= ath79_wdt_write,
+	.unlocked_ioctl	= ath79_wdt_ioctl,
+	.open		= ath79_wdt_open,
+	.release	= ath79_wdt_release,
+};
+
+static struct miscdevice ath79_wdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &ath79_wdt_fops,
+};
+
+static int ath79_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	u32 ctrl;
+	int err;
+
+	if (wdt_base)
+		return -EBUSY;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(wdt_base))
+		return PTR_ERR(wdt_base);
+
+	wdt_clk = devm_clk_get(&pdev->dev, "wdt");
+	if (IS_ERR(wdt_clk))
+		return PTR_ERR(wdt_clk);
+
+	err = clk_prepare_enable(wdt_clk);
+	if (err)
+		return err;
+
+	wdt_freq = clk_get_rate(wdt_clk);
+	if (!wdt_freq) {
+		err = -EINVAL;
+		goto err_clk_disable;
+	}
+
+	max_timeout = (0xfffffffful / wdt_freq);
+	if (timeout < 1 || timeout > max_timeout) {
+		timeout = max_timeout;
+		dev_info(&pdev->dev,
+			"timeout value must be 0 < timeout < %d, using %d\n",
+			max_timeout, timeout);
+	}
+
+	ctrl = ath79_wdt_rr(WDOG_REG_CTRL);
+	boot_status = (ctrl & WDOG_CTRL_LAST_RESET) ? WDIOF_CARDRESET : 0;
+
+	err = misc_register(&ath79_wdt_miscdev);
+	if (err) {
+		dev_err(&pdev->dev,
+			"unable to register misc device, err=%d\n", err);
+		goto err_clk_disable;
+	}
+
+	return 0;
+
+err_clk_disable:
+	clk_disable_unprepare(wdt_clk);
+	return err;
+}
+
+static int ath79_wdt_remove(struct platform_device *pdev)
+{
+	misc_deregister(&ath79_wdt_miscdev);
+	clk_disable_unprepare(wdt_clk);
+	return 0;
+}
+
+static void ath97_wdt_shutdown(struct platform_device *pdev)
+{
+	ath79_wdt_disable();
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id ath79_wdt_match[] = {
+	{ .compatible = "qca,ar7130-wdt" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ath79_wdt_match);
+#endif
+
+static struct platform_driver ath79_wdt_driver = {
+	.probe		= ath79_wdt_probe,
+	.remove		= ath79_wdt_remove,
+	.shutdown	= ath97_wdt_shutdown,
+	.driver		= {
+		.name	= DRIVER_NAME,
+		.of_match_table = of_match_ptr(ath79_wdt_match),
+	},
+};
+
+module_platform_driver(ath79_wdt_driver);
+
+MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X hardware watchdog driver");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org");
+MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/watchdog/atlas7_wdt.c b/drivers/watchdog/atlas7_wdt.c
new file mode 100644
index 000000000..4abdcabd8
--- /dev/null
+++ b/drivers/watchdog/atlas7_wdt.c
@@ -0,0 +1,247 @@
+/*
+ * Watchdog driver for CSR Atlas7
+ *
+ * Copyright (c) 2015 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define ATLAS7_TIMER_WDT_INDEX		5
+#define ATLAS7_WDT_DEFAULT_TIMEOUT	20
+
+#define ATLAS7_WDT_CNT_CTRL	(0 + 4 * ATLAS7_TIMER_WDT_INDEX)
+#define ATLAS7_WDT_CNT_MATCH	(0x18 + 4 * ATLAS7_TIMER_WDT_INDEX)
+#define ATLAS7_WDT_CNT		(0x48 +  4 * ATLAS7_TIMER_WDT_INDEX)
+#define ATLAS7_WDT_CNT_EN	(BIT(0) | BIT(1))
+#define ATLAS7_WDT_EN		0x64
+
+static unsigned int timeout = ATLAS7_WDT_DEFAULT_TIMEOUT;
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+module_param(timeout, uint, 0);
+module_param(nowayout, bool, 0);
+
+MODULE_PARM_DESC(timeout, "Default watchdog timeout (in seconds)");
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+			__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct atlas7_wdog {
+	struct device *dev;
+	void __iomem *base;
+	unsigned long tick_rate;
+	struct clk *clk;
+};
+
+static unsigned int atlas7_wdt_gettimeleft(struct watchdog_device *wdd)
+{
+	struct atlas7_wdog *wdt = watchdog_get_drvdata(wdd);
+	u32 counter, match, delta;
+
+	counter = readl(wdt->base + ATLAS7_WDT_CNT);
+	match = readl(wdt->base + ATLAS7_WDT_CNT_MATCH);
+	delta = match - counter;
+
+	return  delta / wdt->tick_rate;
+}
+
+static int atlas7_wdt_ping(struct watchdog_device *wdd)
+{
+	struct atlas7_wdog *wdt = watchdog_get_drvdata(wdd);
+	u32 counter, match, delta;
+
+	counter = readl(wdt->base + ATLAS7_WDT_CNT);
+	delta = wdd->timeout * wdt->tick_rate;
+	match = counter + delta;
+
+	writel(match, wdt->base + ATLAS7_WDT_CNT_MATCH);
+
+	return 0;
+}
+
+static int atlas7_wdt_enable(struct watchdog_device *wdd)
+{
+	struct atlas7_wdog *wdt = watchdog_get_drvdata(wdd);
+
+	atlas7_wdt_ping(wdd);
+
+	writel(readl(wdt->base + ATLAS7_WDT_CNT_CTRL) | ATLAS7_WDT_CNT_EN,
+	      wdt->base + ATLAS7_WDT_CNT_CTRL);
+	writel(1, wdt->base + ATLAS7_WDT_EN);
+
+	return 0;
+}
+
+static int atlas7_wdt_disable(struct watchdog_device *wdd)
+{
+	struct atlas7_wdog *wdt = watchdog_get_drvdata(wdd);
+
+	writel(0, wdt->base + ATLAS7_WDT_EN);
+	writel(readl(wdt->base + ATLAS7_WDT_CNT_CTRL) & ~ATLAS7_WDT_CNT_EN,
+	      wdt->base + ATLAS7_WDT_CNT_CTRL);
+
+	return 0;
+}
+
+static int atlas7_wdt_settimeout(struct watchdog_device *wdd, unsigned int to)
+{
+	wdd->timeout = to;
+
+	return 0;
+}
+
+#define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
+
+static const struct watchdog_info atlas7_wdt_ident = {
+	.options = OPTIONS,
+	.firmware_version = 0,
+	.identity = "atlas7 Watchdog",
+};
+
+static const struct watchdog_ops atlas7_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = atlas7_wdt_enable,
+	.stop = atlas7_wdt_disable,
+	.get_timeleft = atlas7_wdt_gettimeleft,
+	.ping = atlas7_wdt_ping,
+	.set_timeout = atlas7_wdt_settimeout,
+};
+
+static struct watchdog_device atlas7_wdd = {
+	.info = &atlas7_wdt_ident,
+	.ops = &atlas7_wdt_ops,
+	.timeout = ATLAS7_WDT_DEFAULT_TIMEOUT,
+};
+
+static const struct of_device_id atlas7_wdt_ids[] = {
+	{ .compatible = "sirf,atlas7-tick"},
+	{}
+};
+
+static int atlas7_wdt_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct atlas7_wdog *wdt;
+	struct resource *res;
+	struct clk *clk;
+	int ret;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(wdt->base))
+		return PTR_ERR(wdt->base);
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "clk enable failed\n");
+		goto err;
+	}
+
+	/* disable watchdog hardware */
+	writel(0, wdt->base + ATLAS7_WDT_CNT_CTRL);
+
+	wdt->tick_rate = clk_get_rate(clk);
+	if (!wdt->tick_rate) {
+		ret = -EINVAL;
+		goto err1;
+	}
+
+	wdt->clk = clk;
+	atlas7_wdd.min_timeout = 1;
+	atlas7_wdd.max_timeout = UINT_MAX / wdt->tick_rate;
+
+	watchdog_init_timeout(&atlas7_wdd, 0, &pdev->dev);
+	watchdog_set_nowayout(&atlas7_wdd, nowayout);
+
+	watchdog_set_drvdata(&atlas7_wdd, wdt);
+	platform_set_drvdata(pdev, &atlas7_wdd);
+
+	ret = watchdog_register_device(&atlas7_wdd);
+	if (ret)
+		goto err1;
+
+	return 0;
+
+err1:
+	clk_disable_unprepare(clk);
+err:
+	clk_put(clk);
+	return ret;
+}
+
+static void atlas7_wdt_shutdown(struct platform_device *pdev)
+{
+	struct watchdog_device *wdd = platform_get_drvdata(pdev);
+	struct atlas7_wdog *wdt = watchdog_get_drvdata(wdd);
+
+	atlas7_wdt_disable(wdd);
+	clk_disable_unprepare(wdt->clk);
+}
+
+static int atlas7_wdt_remove(struct platform_device *pdev)
+{
+	struct watchdog_device *wdd = platform_get_drvdata(pdev);
+	struct atlas7_wdog *wdt = watchdog_get_drvdata(wdd);
+
+	atlas7_wdt_shutdown(pdev);
+	clk_put(wdt->clk);
+	return 0;
+}
+
+static int __maybe_unused atlas7_wdt_suspend(struct device *dev)
+{
+	/*
+	 * NOTE:timer controller registers settings are saved
+	 * and restored back by the timer-atlas7.c
+	 */
+	return 0;
+}
+
+static int __maybe_unused atlas7_wdt_resume(struct device *dev)
+{
+	struct watchdog_device *wdd = dev_get_drvdata(dev);
+
+	/*
+	 * NOTE: Since timer controller registers settings are saved
+	 * and restored back by the timer-atlas7.c, so we need not
+	 * update WD settings except refreshing timeout.
+	 */
+	atlas7_wdt_ping(wdd);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(atlas7_wdt_pm_ops,
+		atlas7_wdt_suspend, atlas7_wdt_resume);
+
+MODULE_DEVICE_TABLE(of, atlas7_wdt_ids);
+
+static struct platform_driver atlas7_wdt_driver = {
+	.driver = {
+		.name = "atlas7-wdt",
+		.pm = &atlas7_wdt_pm_ops,
+		.of_match_table	= atlas7_wdt_ids,
+	},
+	.probe = atlas7_wdt_probe,
+	.remove = atlas7_wdt_remove,
+	.shutdown = atlas7_wdt_shutdown,
+};
+module_platform_driver(atlas7_wdt_driver);
+
+MODULE_DESCRIPTION("CSRatlas7 watchdog driver");
+MODULE_AUTHOR("Guo Zeng <Guo.Zeng@csr.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:atlas7-wdt");
diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c
new file mode 100644
index 000000000..e6c27b71b
--- /dev/null
+++ b/drivers/watchdog/bcm2835_wdt.c
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Watchdog driver for Broadcom BCM2835
+ *
+ * "bcm2708_wdog" driver written by Luke Diamand that was obtained from
+ * branch "rpi-3.6.y" of git://github.com/raspberrypi/linux.git was used
+ * as a hardware reference for the Broadcom BCM2835 watchdog timer.
+ *
+ * Copyright (C) 2013 Lubomir Rintel <lkundrak@v3.sk>
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#define PM_RSTC				0x1c
+#define PM_RSTS				0x20
+#define PM_WDOG				0x24
+
+#define PM_PASSWORD			0x5a000000
+
+#define PM_WDOG_TIME_SET		0x000fffff
+#define PM_RSTC_WRCFG_CLR		0xffffffcf
+#define PM_RSTS_HADWRH_SET		0x00000040
+#define PM_RSTC_WRCFG_SET		0x00000030
+#define PM_RSTC_WRCFG_FULL_RESET	0x00000020
+#define PM_RSTC_RESET			0x00000102
+
+/*
+ * The Raspberry Pi firmware uses the RSTS register to know which partition
+ * to boot from. The partition value is spread into bits 0, 2, 4, 6, 8, 10.
+ * Partition 63 is a special partition used by the firmware to indicate halt.
+ */
+#define PM_RSTS_RASPBERRYPI_HALT	0x555
+
+#define SECS_TO_WDOG_TICKS(x) ((x) << 16)
+#define WDOG_TICKS_TO_SECS(x) ((x) >> 16)
+
+struct bcm2835_wdt {
+	void __iomem		*base;
+	spinlock_t		lock;
+};
+
+static unsigned int heartbeat;
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+static bool bcm2835_wdt_is_running(struct bcm2835_wdt *wdt)
+{
+	uint32_t cur;
+
+	cur = readl(wdt->base + PM_RSTC);
+
+	return !!(cur & PM_RSTC_WRCFG_FULL_RESET);
+}
+
+static int bcm2835_wdt_start(struct watchdog_device *wdog)
+{
+	struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
+	uint32_t cur;
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdt->lock, flags);
+
+	writel_relaxed(PM_PASSWORD | (SECS_TO_WDOG_TICKS(wdog->timeout) &
+				PM_WDOG_TIME_SET), wdt->base + PM_WDOG);
+	cur = readl_relaxed(wdt->base + PM_RSTC);
+	writel_relaxed(PM_PASSWORD | (cur & PM_RSTC_WRCFG_CLR) |
+		  PM_RSTC_WRCFG_FULL_RESET, wdt->base + PM_RSTC);
+
+	spin_unlock_irqrestore(&wdt->lock, flags);
+
+	return 0;
+}
+
+static int bcm2835_wdt_stop(struct watchdog_device *wdog)
+{
+	struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
+
+	writel_relaxed(PM_PASSWORD | PM_RSTC_RESET, wdt->base + PM_RSTC);
+	return 0;
+}
+
+static unsigned int bcm2835_wdt_get_timeleft(struct watchdog_device *wdog)
+{
+	struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
+
+	uint32_t ret = readl_relaxed(wdt->base + PM_WDOG);
+	return WDOG_TICKS_TO_SECS(ret & PM_WDOG_TIME_SET);
+}
+
+static void __bcm2835_restart(struct bcm2835_wdt *wdt)
+{
+	u32 val;
+
+	/* use a timeout of 10 ticks (~150us) */
+	writel_relaxed(10 | PM_PASSWORD, wdt->base + PM_WDOG);
+	val = readl_relaxed(wdt->base + PM_RSTC);
+	val &= PM_RSTC_WRCFG_CLR;
+	val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET;
+	writel_relaxed(val, wdt->base + PM_RSTC);
+
+	/* No sleeping, possibly atomic. */
+	mdelay(1);
+}
+
+static int bcm2835_restart(struct watchdog_device *wdog,
+			   unsigned long action, void *data)
+{
+	struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
+
+	__bcm2835_restart(wdt);
+
+	return 0;
+}
+
+static const struct watchdog_ops bcm2835_wdt_ops = {
+	.owner =	THIS_MODULE,
+	.start =	bcm2835_wdt_start,
+	.stop =		bcm2835_wdt_stop,
+	.get_timeleft =	bcm2835_wdt_get_timeleft,
+	.restart =	bcm2835_restart,
+};
+
+static const struct watchdog_info bcm2835_wdt_info = {
+	.options =	WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
+			WDIOF_KEEPALIVEPING,
+	.identity =	"Broadcom BCM2835 Watchdog timer",
+};
+
+static struct watchdog_device bcm2835_wdt_wdd = {
+	.info =		&bcm2835_wdt_info,
+	.ops =		&bcm2835_wdt_ops,
+	.min_timeout =	1,
+	.max_timeout =	WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET),
+	.timeout =	WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET),
+};
+
+/*
+ * We can't really power off, but if we do the normal reset scheme, and
+ * indicate to bootcode.bin not to reboot, then most of the chip will be
+ * powered off.
+ */
+static void bcm2835_power_off(void)
+{
+	struct device_node *np =
+		of_find_compatible_node(NULL, NULL, "brcm,bcm2835-pm-wdt");
+	struct platform_device *pdev = of_find_device_by_node(np);
+	struct bcm2835_wdt *wdt = platform_get_drvdata(pdev);
+	u32 val;
+
+	/*
+	 * We set the watchdog hard reset bit here to distinguish this reset
+	 * from the normal (full) reset. bootcode.bin will not reboot after a
+	 * hard reset.
+	 */
+	val = readl_relaxed(wdt->base + PM_RSTS);
+	val |= PM_PASSWORD | PM_RSTS_RASPBERRYPI_HALT;
+	writel_relaxed(val, wdt->base + PM_RSTS);
+
+	/* Continue with normal reset mechanism */
+	__bcm2835_restart(wdt);
+}
+
+static int bcm2835_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct bcm2835_wdt *wdt;
+	int err;
+
+	wdt = devm_kzalloc(dev, sizeof(struct bcm2835_wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, wdt);
+
+	spin_lock_init(&wdt->lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(wdt->base))
+		return PTR_ERR(wdt->base);
+
+	watchdog_set_drvdata(&bcm2835_wdt_wdd, wdt);
+	watchdog_init_timeout(&bcm2835_wdt_wdd, heartbeat, dev);
+	watchdog_set_nowayout(&bcm2835_wdt_wdd, nowayout);
+	bcm2835_wdt_wdd.parent = dev;
+	if (bcm2835_wdt_is_running(wdt)) {
+		/*
+		 * The currently active timeout value (set by the
+		 * bootloader) may be different from the module
+		 * heartbeat parameter or the value in device
+		 * tree. But we just need to set WDOG_HW_RUNNING,
+		 * because then the framework will "immediately" ping
+		 * the device, updating the timeout.
+		 */
+		set_bit(WDOG_HW_RUNNING, &bcm2835_wdt_wdd.status);
+	}
+
+	watchdog_set_restart_priority(&bcm2835_wdt_wdd, 128);
+
+	watchdog_stop_on_reboot(&bcm2835_wdt_wdd);
+	err = devm_watchdog_register_device(dev, &bcm2835_wdt_wdd);
+	if (err) {
+		dev_err(dev, "Failed to register watchdog device");
+		return err;
+	}
+
+	if (pm_power_off == NULL)
+		pm_power_off = bcm2835_power_off;
+
+	dev_info(dev, "Broadcom BCM2835 watchdog timer");
+	return 0;
+}
+
+static int bcm2835_wdt_remove(struct platform_device *pdev)
+{
+	if (pm_power_off == bcm2835_power_off)
+		pm_power_off = NULL;
+
+	return 0;
+}
+
+static const struct of_device_id bcm2835_wdt_of_match[] = {
+	{ .compatible = "brcm,bcm2835-pm-wdt", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm2835_wdt_of_match);
+
+static struct platform_driver bcm2835_wdt_driver = {
+	.probe		= bcm2835_wdt_probe,
+	.remove		= bcm2835_wdt_remove,
+	.driver = {
+		.name =		"bcm2835-wdt",
+		.of_match_table = bcm2835_wdt_of_match,
+	},
+};
+module_platform_driver(bcm2835_wdt_driver);
+
+module_param(heartbeat, uint, 0);
+MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+MODULE_ALIAS("platform:bcm2835-wdt");
+MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
+MODULE_DESCRIPTION("Driver for Broadcom BCM2835 watchdog timer");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/bcm47xx_wdt.c b/drivers/watchdog/bcm47xx_wdt.c
new file mode 100644
index 000000000..05425c1df
--- /dev/null
+++ b/drivers/watchdog/bcm47xx_wdt.c
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Watchdog driver for Broadcom BCM47XX
+ *
+ *  Copyright (C) 2008 Aleksandar Radovanovic <biblbroks@sezampro.rs>
+ *  Copyright (C) 2009 Matthieu CASTET <castet.matthieu@free.fr>
+ *  Copyright (C) 2012-2013 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bcm47xx_wdt.h>
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+
+#define DRV_NAME		"bcm47xx_wdt"
+
+#define WDT_DEFAULT_TIME	30	/* seconds */
+#define WDT_SOFTTIMER_MAX	255	/* seconds */
+#define WDT_SOFTTIMER_THRESHOLD	60	/* seconds */
+
+static int timeout = WDT_DEFAULT_TIME;
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog time in seconds. (default="
+				__MODULE_STRING(WDT_DEFAULT_TIME) ")");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static inline struct bcm47xx_wdt *bcm47xx_wdt_get(struct watchdog_device *wdd)
+{
+	return container_of(wdd, struct bcm47xx_wdt, wdd);
+}
+
+static int bcm47xx_wdt_hard_keepalive(struct watchdog_device *wdd)
+{
+	struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd);
+
+	wdt->timer_set_ms(wdt, wdd->timeout * 1000);
+
+	return 0;
+}
+
+static int bcm47xx_wdt_hard_start(struct watchdog_device *wdd)
+{
+	return 0;
+}
+
+static int bcm47xx_wdt_hard_stop(struct watchdog_device *wdd)
+{
+	struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd);
+
+	wdt->timer_set(wdt, 0);
+
+	return 0;
+}
+
+static int bcm47xx_wdt_hard_set_timeout(struct watchdog_device *wdd,
+					unsigned int new_time)
+{
+	struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd);
+	u32 max_timer = wdt->max_timer_ms;
+
+	if (new_time < 1 || new_time > max_timer / 1000) {
+		pr_warn("timeout value must be 1<=x<=%d, using %d\n",
+			max_timer / 1000, new_time);
+		return -EINVAL;
+	}
+
+	wdd->timeout = new_time;
+	return 0;
+}
+
+static int bcm47xx_wdt_restart(struct watchdog_device *wdd,
+			       unsigned long action, void *data)
+{
+	struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd);
+
+	wdt->timer_set(wdt, 1);
+
+	return 0;
+}
+
+static const struct watchdog_ops bcm47xx_wdt_hard_ops = {
+	.owner		= THIS_MODULE,
+	.start		= bcm47xx_wdt_hard_start,
+	.stop		= bcm47xx_wdt_hard_stop,
+	.ping		= bcm47xx_wdt_hard_keepalive,
+	.set_timeout	= bcm47xx_wdt_hard_set_timeout,
+	.restart        = bcm47xx_wdt_restart,
+};
+
+static void bcm47xx_wdt_soft_timer_tick(struct timer_list *t)
+{
+	struct bcm47xx_wdt *wdt = from_timer(wdt, t, soft_timer);
+	u32 next_tick = min(wdt->wdd.timeout * 1000, wdt->max_timer_ms);
+
+	if (!atomic_dec_and_test(&wdt->soft_ticks)) {
+		wdt->timer_set_ms(wdt, next_tick);
+		mod_timer(&wdt->soft_timer, jiffies + HZ);
+	} else {
+		pr_crit("Watchdog will fire soon!!!\n");
+	}
+}
+
+static int bcm47xx_wdt_soft_keepalive(struct watchdog_device *wdd)
+{
+	struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd);
+
+	atomic_set(&wdt->soft_ticks, wdd->timeout);
+
+	return 0;
+}
+
+static int bcm47xx_wdt_soft_start(struct watchdog_device *wdd)
+{
+	struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd);
+
+	bcm47xx_wdt_soft_keepalive(wdd);
+	bcm47xx_wdt_soft_timer_tick(&wdt->soft_timer);
+
+	return 0;
+}
+
+static int bcm47xx_wdt_soft_stop(struct watchdog_device *wdd)
+{
+	struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd);
+
+	del_timer_sync(&wdt->soft_timer);
+	wdt->timer_set(wdt, 0);
+
+	return 0;
+}
+
+static int bcm47xx_wdt_soft_set_timeout(struct watchdog_device *wdd,
+					unsigned int new_time)
+{
+	if (new_time < 1 || new_time > WDT_SOFTTIMER_MAX) {
+		pr_warn("timeout value must be 1<=x<=%d, using %d\n",
+			WDT_SOFTTIMER_MAX, new_time);
+		return -EINVAL;
+	}
+
+	wdd->timeout = new_time;
+	return 0;
+}
+
+static const struct watchdog_info bcm47xx_wdt_info = {
+	.identity	= DRV_NAME,
+	.options	= WDIOF_SETTIMEOUT |
+				WDIOF_KEEPALIVEPING |
+				WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops bcm47xx_wdt_soft_ops = {
+	.owner		= THIS_MODULE,
+	.start		= bcm47xx_wdt_soft_start,
+	.stop		= bcm47xx_wdt_soft_stop,
+	.ping		= bcm47xx_wdt_soft_keepalive,
+	.set_timeout	= bcm47xx_wdt_soft_set_timeout,
+	.restart        = bcm47xx_wdt_restart,
+};
+
+static int bcm47xx_wdt_probe(struct platform_device *pdev)
+{
+	int ret;
+	bool soft;
+	struct bcm47xx_wdt *wdt = dev_get_platdata(&pdev->dev);
+
+	if (!wdt)
+		return -ENXIO;
+
+	soft = wdt->max_timer_ms < WDT_SOFTTIMER_THRESHOLD * 1000;
+
+	if (soft) {
+		wdt->wdd.ops = &bcm47xx_wdt_soft_ops;
+		timer_setup(&wdt->soft_timer, bcm47xx_wdt_soft_timer_tick, 0);
+	} else {
+		wdt->wdd.ops = &bcm47xx_wdt_hard_ops;
+	}
+
+	wdt->wdd.info = &bcm47xx_wdt_info;
+	wdt->wdd.timeout = WDT_DEFAULT_TIME;
+	wdt->wdd.parent = &pdev->dev;
+	ret = wdt->wdd.ops->set_timeout(&wdt->wdd, timeout);
+	if (ret)
+		goto err_timer;
+	watchdog_set_nowayout(&wdt->wdd, nowayout);
+	watchdog_set_restart_priority(&wdt->wdd, 64);
+	watchdog_stop_on_reboot(&wdt->wdd);
+
+	ret = watchdog_register_device(&wdt->wdd);
+	if (ret)
+		goto err_timer;
+
+	dev_info(&pdev->dev, "BCM47xx Watchdog Timer enabled (%d seconds%s%s)\n",
+		timeout, nowayout ? ", nowayout" : "",
+		soft ? ", Software Timer" : "");
+	return 0;
+
+err_timer:
+	if (soft)
+		del_timer_sync(&wdt->soft_timer);
+
+	return ret;
+}
+
+static int bcm47xx_wdt_remove(struct platform_device *pdev)
+{
+	struct bcm47xx_wdt *wdt = dev_get_platdata(&pdev->dev);
+
+	watchdog_unregister_device(&wdt->wdd);
+
+	return 0;
+}
+
+static struct platform_driver bcm47xx_wdt_driver = {
+	.driver		= {
+		.name	= "bcm47xx-wdt",
+	},
+	.probe		= bcm47xx_wdt_probe,
+	.remove		= bcm47xx_wdt_remove,
+};
+
+module_platform_driver(bcm47xx_wdt_driver);
+
+MODULE_AUTHOR("Aleksandar Radovanovic");
+MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>");
+MODULE_DESCRIPTION("Watchdog driver for Broadcom BCM47xx");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/bcm63xx_wdt.c b/drivers/watchdog/bcm63xx_wdt.c
new file mode 100644
index 000000000..d3c1113e7
--- /dev/null
+++ b/drivers/watchdog/bcm63xx_wdt.c
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Broadcom BCM63xx SoC watchdog driver
+ *
+ *  Copyright (C) 2007, Miguel Gaio <miguel.gaio@efixo.com>
+ *  Copyright (C) 2008, Florian Fainelli <florian@openwrt.org>
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/resource.h>
+#include <linux/platform_device.h>
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_timer.h>
+
+#define PFX KBUILD_MODNAME
+
+#define WDT_HZ		50000000 /* Fclk */
+#define WDT_DEFAULT_TIME	30      /* seconds */
+#define WDT_MAX_TIME		256     /* seconds */
+
+static struct {
+	void __iomem *regs;
+	struct timer_list timer;
+	unsigned long inuse;
+	atomic_t ticks;
+} bcm63xx_wdt_device;
+
+static int expect_close;
+
+static int wdt_time = WDT_DEFAULT_TIME;
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/* HW functions */
+static void bcm63xx_wdt_hw_start(void)
+{
+	bcm_writel(0xfffffffe, bcm63xx_wdt_device.regs + WDT_DEFVAL_REG);
+	bcm_writel(WDT_START_1, bcm63xx_wdt_device.regs + WDT_CTL_REG);
+	bcm_writel(WDT_START_2, bcm63xx_wdt_device.regs + WDT_CTL_REG);
+}
+
+static void bcm63xx_wdt_hw_stop(void)
+{
+	bcm_writel(WDT_STOP_1, bcm63xx_wdt_device.regs + WDT_CTL_REG);
+	bcm_writel(WDT_STOP_2, bcm63xx_wdt_device.regs + WDT_CTL_REG);
+}
+
+static void bcm63xx_wdt_isr(void *data)
+{
+	struct pt_regs *regs = get_irq_regs();
+
+	die(PFX " fire", regs);
+}
+
+static void bcm63xx_timer_tick(struct timer_list *unused)
+{
+	if (!atomic_dec_and_test(&bcm63xx_wdt_device.ticks)) {
+		bcm63xx_wdt_hw_start();
+		mod_timer(&bcm63xx_wdt_device.timer, jiffies + HZ);
+	} else
+		pr_crit("watchdog will restart system\n");
+}
+
+static void bcm63xx_wdt_pet(void)
+{
+	atomic_set(&bcm63xx_wdt_device.ticks, wdt_time);
+}
+
+static void bcm63xx_wdt_start(void)
+{
+	bcm63xx_wdt_pet();
+	bcm63xx_timer_tick(0);
+}
+
+static void bcm63xx_wdt_pause(void)
+{
+	del_timer_sync(&bcm63xx_wdt_device.timer);
+	bcm63xx_wdt_hw_stop();
+}
+
+static int bcm63xx_wdt_settimeout(int new_time)
+{
+	if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
+		return -EINVAL;
+
+	wdt_time = new_time;
+
+	return 0;
+}
+
+static int bcm63xx_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &bcm63xx_wdt_device.inuse))
+		return -EBUSY;
+
+	bcm63xx_wdt_start();
+	return nonseekable_open(inode, file);
+}
+
+static int bcm63xx_wdt_release(struct inode *inode, struct file *file)
+{
+	if (expect_close == 42)
+		bcm63xx_wdt_pause();
+	else {
+		pr_crit("Unexpected close, not stopping watchdog!\n");
+		bcm63xx_wdt_start();
+	}
+	clear_bit(0, &bcm63xx_wdt_device.inuse);
+	expect_close = 0;
+	return 0;
+}
+
+static ssize_t bcm63xx_wdt_write(struct file *file, const char *data,
+				size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			expect_close = 0;
+
+			for (i = 0; i != len; i++) {
+				char c;
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+		bcm63xx_wdt_pet();
+	}
+	return len;
+}
+
+static struct watchdog_info bcm63xx_wdt_info = {
+	.identity       = PFX,
+	.options        = WDIOF_SETTIMEOUT |
+				WDIOF_KEEPALIVEPING |
+				WDIOF_MAGICCLOSE,
+};
+
+
+static long bcm63xx_wdt_ioctl(struct file *file, unsigned int cmd,
+				unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int new_value, retval = -EINVAL;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &bcm63xx_wdt_info,
+			sizeof(bcm63xx_wdt_info)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_SETOPTIONS:
+		if (get_user(new_value, p))
+			return -EFAULT;
+
+		if (new_value & WDIOS_DISABLECARD) {
+			bcm63xx_wdt_pause();
+			retval = 0;
+		}
+		if (new_value & WDIOS_ENABLECARD) {
+			bcm63xx_wdt_start();
+			retval = 0;
+		}
+
+		return retval;
+
+	case WDIOC_KEEPALIVE:
+		bcm63xx_wdt_pet();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_value, p))
+			return -EFAULT;
+
+		if (bcm63xx_wdt_settimeout(new_value))
+			return -EINVAL;
+
+		bcm63xx_wdt_pet();
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(wdt_time, p);
+
+	default:
+		return -ENOTTY;
+
+	}
+}
+
+static const struct file_operations bcm63xx_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= bcm63xx_wdt_write,
+	.unlocked_ioctl	= bcm63xx_wdt_ioctl,
+	.open		= bcm63xx_wdt_open,
+	.release	= bcm63xx_wdt_release,
+};
+
+static struct miscdevice bcm63xx_wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &bcm63xx_wdt_fops,
+};
+
+
+static int bcm63xx_wdt_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct resource *r;
+
+	timer_setup(&bcm63xx_wdt_device.timer, bcm63xx_timer_tick, 0);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "failed to get resources\n");
+		return -ENODEV;
+	}
+
+	bcm63xx_wdt_device.regs = devm_ioremap_nocache(&pdev->dev, r->start,
+							resource_size(r));
+	if (!bcm63xx_wdt_device.regs) {
+		dev_err(&pdev->dev, "failed to remap I/O resources\n");
+		return -ENXIO;
+	}
+
+	ret = bcm63xx_timer_register(TIMER_WDT_ID, bcm63xx_wdt_isr, NULL);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to register wdt timer isr\n");
+		return ret;
+	}
+
+	if (bcm63xx_wdt_settimeout(wdt_time)) {
+		bcm63xx_wdt_settimeout(WDT_DEFAULT_TIME);
+		dev_info(&pdev->dev,
+			": wdt_time value must be 1 <= wdt_time <= 256, using %d\n",
+			wdt_time);
+	}
+
+	ret = misc_register(&bcm63xx_wdt_miscdev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to register watchdog device\n");
+		goto unregister_timer;
+	}
+
+	dev_info(&pdev->dev, " started, timer margin: %d sec\n",
+						WDT_DEFAULT_TIME);
+
+	return 0;
+
+unregister_timer:
+	bcm63xx_timer_unregister(TIMER_WDT_ID);
+	return ret;
+}
+
+static int bcm63xx_wdt_remove(struct platform_device *pdev)
+{
+	if (!nowayout)
+		bcm63xx_wdt_pause();
+
+	misc_deregister(&bcm63xx_wdt_miscdev);
+	bcm63xx_timer_unregister(TIMER_WDT_ID);
+	return 0;
+}
+
+static void bcm63xx_wdt_shutdown(struct platform_device *pdev)
+{
+	bcm63xx_wdt_pause();
+}
+
+static struct platform_driver bcm63xx_wdt_driver = {
+	.probe	= bcm63xx_wdt_probe,
+	.remove = bcm63xx_wdt_remove,
+	.shutdown = bcm63xx_wdt_shutdown,
+	.driver = {
+		.name = "bcm63xx-wdt",
+	}
+};
+
+module_platform_driver(bcm63xx_wdt_driver);
+
+MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>");
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("Driver for the Broadcom BCM63xx SoC watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:bcm63xx-wdt");
diff --git a/drivers/watchdog/bcm7038_wdt.c b/drivers/watchdog/bcm7038_wdt.c
new file mode 100644
index 000000000..ce3f646e8
--- /dev/null
+++ b/drivers/watchdog/bcm7038_wdt.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/watchdog.h>
+
+#define WDT_START_1		0xff00
+#define WDT_START_2		0x00ff
+#define WDT_STOP_1		0xee00
+#define WDT_STOP_2		0x00ee
+
+#define WDT_TIMEOUT_REG		0x0
+#define WDT_CMD_REG		0x4
+
+#define WDT_MIN_TIMEOUT		1 /* seconds */
+#define WDT_DEFAULT_TIMEOUT	30 /* seconds */
+#define WDT_DEFAULT_RATE	27000000
+
+struct bcm7038_watchdog {
+	void __iomem		*base;
+	struct watchdog_device	wdd;
+	u32			rate;
+	struct clk		*clk;
+};
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+static void bcm7038_wdt_set_timeout_reg(struct watchdog_device *wdog)
+{
+	struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
+	u32 timeout;
+
+	timeout = wdt->rate * wdog->timeout;
+
+	writel(timeout, wdt->base + WDT_TIMEOUT_REG);
+}
+
+static int bcm7038_wdt_ping(struct watchdog_device *wdog)
+{
+	struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
+
+	writel(WDT_START_1, wdt->base + WDT_CMD_REG);
+	writel(WDT_START_2, wdt->base + WDT_CMD_REG);
+
+	return 0;
+}
+
+static int bcm7038_wdt_start(struct watchdog_device *wdog)
+{
+	bcm7038_wdt_set_timeout_reg(wdog);
+	bcm7038_wdt_ping(wdog);
+
+	return 0;
+}
+
+static int bcm7038_wdt_stop(struct watchdog_device *wdog)
+{
+	struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
+
+	writel(WDT_STOP_1, wdt->base + WDT_CMD_REG);
+	writel(WDT_STOP_2, wdt->base + WDT_CMD_REG);
+
+	return 0;
+}
+
+static int bcm7038_wdt_set_timeout(struct watchdog_device *wdog,
+				   unsigned int t)
+{
+	/* Can't modify timeout value if watchdog timer is running */
+	bcm7038_wdt_stop(wdog);
+	wdog->timeout = t;
+	bcm7038_wdt_start(wdog);
+
+	return 0;
+}
+
+static unsigned int bcm7038_wdt_get_timeleft(struct watchdog_device *wdog)
+{
+	struct bcm7038_watchdog *wdt = watchdog_get_drvdata(wdog);
+	u32 time_left;
+
+	time_left = readl(wdt->base + WDT_CMD_REG);
+
+	return time_left / wdt->rate;
+}
+
+static const struct watchdog_info bcm7038_wdt_info = {
+	.identity	= "Broadcom BCM7038 Watchdog Timer",
+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+				WDIOF_MAGICCLOSE
+};
+
+static const struct watchdog_ops bcm7038_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= bcm7038_wdt_start,
+	.stop		= bcm7038_wdt_stop,
+	.set_timeout	= bcm7038_wdt_set_timeout,
+	.get_timeleft	= bcm7038_wdt_get_timeleft,
+};
+
+static int bcm7038_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct bcm7038_watchdog *wdt;
+	struct resource *res;
+	int err;
+
+	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, wdt);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(wdt->base))
+		return PTR_ERR(wdt->base);
+
+	wdt->clk = devm_clk_get(dev, NULL);
+	/* If unable to get clock, use default frequency */
+	if (!IS_ERR(wdt->clk)) {
+		err = clk_prepare_enable(wdt->clk);
+		if (err)
+			return err;
+		wdt->rate = clk_get_rate(wdt->clk);
+		/* Prevent divide-by-zero exception */
+		if (!wdt->rate)
+			wdt->rate = WDT_DEFAULT_RATE;
+	} else {
+		wdt->rate = WDT_DEFAULT_RATE;
+		wdt->clk = NULL;
+	}
+
+	wdt->wdd.info		= &bcm7038_wdt_info;
+	wdt->wdd.ops		= &bcm7038_wdt_ops;
+	wdt->wdd.min_timeout	= WDT_MIN_TIMEOUT;
+	wdt->wdd.timeout	= WDT_DEFAULT_TIMEOUT;
+	wdt->wdd.max_timeout	= 0xffffffff / wdt->rate;
+	wdt->wdd.parent		= dev;
+	watchdog_set_drvdata(&wdt->wdd, wdt);
+
+	err = watchdog_register_device(&wdt->wdd);
+	if (err) {
+		dev_err(dev, "Failed to register watchdog device\n");
+		clk_disable_unprepare(wdt->clk);
+		return err;
+	}
+
+	dev_info(dev, "Registered BCM7038 Watchdog\n");
+
+	return 0;
+}
+
+static int bcm7038_wdt_remove(struct platform_device *pdev)
+{
+	struct bcm7038_watchdog *wdt = platform_get_drvdata(pdev);
+
+	if (!nowayout)
+		bcm7038_wdt_stop(&wdt->wdd);
+
+	watchdog_unregister_device(&wdt->wdd);
+	clk_disable_unprepare(wdt->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int bcm7038_wdt_suspend(struct device *dev)
+{
+	struct bcm7038_watchdog *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->wdd))
+		return bcm7038_wdt_stop(&wdt->wdd);
+
+	return 0;
+}
+
+static int bcm7038_wdt_resume(struct device *dev)
+{
+	struct bcm7038_watchdog *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->wdd))
+		return bcm7038_wdt_start(&wdt->wdd);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(bcm7038_wdt_pm_ops, bcm7038_wdt_suspend,
+			 bcm7038_wdt_resume);
+
+static void bcm7038_wdt_shutdown(struct platform_device *pdev)
+{
+	struct bcm7038_watchdog *wdt = platform_get_drvdata(pdev);
+
+	if (watchdog_active(&wdt->wdd))
+		bcm7038_wdt_stop(&wdt->wdd);
+}
+
+static const struct of_device_id bcm7038_wdt_match[] = {
+	{ .compatible = "brcm,bcm7038-wdt" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm7038_wdt_match);
+
+static struct platform_driver bcm7038_wdt_driver = {
+	.probe		= bcm7038_wdt_probe,
+	.remove		= bcm7038_wdt_remove,
+	.shutdown	= bcm7038_wdt_shutdown,
+	.driver		= {
+		.name		= "bcm7038-wdt",
+		.of_match_table	= bcm7038_wdt_match,
+		.pm		= &bcm7038_wdt_pm_ops,
+	}
+};
+module_platform_driver(bcm7038_wdt_driver);
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for Broadcom 7038 SoCs Watchdog");
+MODULE_AUTHOR("Justin Chen");
diff --git a/drivers/watchdog/bcm_kona_wdt.c b/drivers/watchdog/bcm_kona_wdt.c
new file mode 100644
index 000000000..1462be9e6
--- /dev/null
+++ b/drivers/watchdog/bcm_kona_wdt.c
@@ -0,0 +1,367 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ */
+
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define SECWDOG_CTRL_REG		0x00000000
+#define SECWDOG_COUNT_REG		0x00000004
+
+#define SECWDOG_RESERVED_MASK		0x1dffffff
+#define SECWDOG_WD_LOAD_FLAG		0x10000000
+#define SECWDOG_EN_MASK			0x08000000
+#define SECWDOG_SRSTEN_MASK		0x04000000
+#define SECWDOG_RES_MASK		0x00f00000
+#define SECWDOG_COUNT_MASK		0x000fffff
+
+#define SECWDOG_MAX_COUNT		SECWDOG_COUNT_MASK
+#define SECWDOG_CLKS_SHIFT		20
+#define SECWDOG_MAX_RES			15
+#define SECWDOG_DEFAULT_RESOLUTION	4
+#define SECWDOG_MAX_TRY			1000
+
+#define SECS_TO_TICKS(x, w)		((x) << (w)->resolution)
+#define TICKS_TO_SECS(x, w)		((x) >> (w)->resolution)
+
+#define BCM_KONA_WDT_NAME		"bcm_kona_wdt"
+
+struct bcm_kona_wdt {
+	void __iomem *base;
+	/*
+	 * One watchdog tick is 1/(2^resolution) seconds. Resolution can take
+	 * the values 0-15, meaning one tick can be 1s to 30.52us. Our default
+	 * resolution of 4 means one tick is 62.5ms.
+	 *
+	 * The watchdog counter is 20 bits. Depending on resolution, the maximum
+	 * counter value of 0xfffff expires after about 12 days (resolution 0)
+	 * down to only 32s (resolution 15). The default resolution of 4 gives
+	 * us a maximum of about 18 hours and 12 minutes before the watchdog
+	 * times out.
+	 */
+	int resolution;
+	spinlock_t lock;
+#ifdef CONFIG_BCM_KONA_WDT_DEBUG
+	unsigned long busy_count;
+	struct dentry *debugfs;
+#endif
+};
+
+static int secure_register_read(struct bcm_kona_wdt *wdt, uint32_t offset)
+{
+	uint32_t val;
+	unsigned count = 0;
+
+	/*
+	 * If the WD_LOAD_FLAG is set, the watchdog counter field is being
+	 * updated in hardware. Once the WD timer is updated in hardware, it
+	 * gets cleared.
+	 */
+	do {
+		if (unlikely(count > 1))
+			udelay(5);
+		val = readl_relaxed(wdt->base + offset);
+		count++;
+	} while ((val & SECWDOG_WD_LOAD_FLAG) && count < SECWDOG_MAX_TRY);
+
+#ifdef CONFIG_BCM_KONA_WDT_DEBUG
+	/* Remember the maximum number iterations due to WD_LOAD_FLAG */
+	if (count > wdt->busy_count)
+		wdt->busy_count = count;
+#endif
+
+	/* This is the only place we return a negative value. */
+	if (val & SECWDOG_WD_LOAD_FLAG)
+		return -ETIMEDOUT;
+
+	/* We always mask out reserved bits. */
+	val &= SECWDOG_RESERVED_MASK;
+
+	return val;
+}
+
+#ifdef CONFIG_BCM_KONA_WDT_DEBUG
+
+static int bcm_kona_wdt_dbg_show(struct seq_file *s, void *data)
+{
+	int ctl_val, cur_val;
+	unsigned long flags;
+	struct bcm_kona_wdt *wdt = s->private;
+
+	if (!wdt) {
+		seq_puts(s, "No device pointer\n");
+		return 0;
+	}
+
+	spin_lock_irqsave(&wdt->lock, flags);
+	ctl_val = secure_register_read(wdt, SECWDOG_CTRL_REG);
+	cur_val = secure_register_read(wdt, SECWDOG_COUNT_REG);
+	spin_unlock_irqrestore(&wdt->lock, flags);
+
+	if (ctl_val < 0 || cur_val < 0) {
+		seq_puts(s, "Error accessing hardware\n");
+	} else {
+		int ctl, cur, ctl_sec, cur_sec, res;
+
+		ctl = ctl_val & SECWDOG_COUNT_MASK;
+		res = (ctl_val & SECWDOG_RES_MASK) >> SECWDOG_CLKS_SHIFT;
+		cur = cur_val & SECWDOG_COUNT_MASK;
+		ctl_sec = TICKS_TO_SECS(ctl, wdt);
+		cur_sec = TICKS_TO_SECS(cur, wdt);
+		seq_printf(s,
+			   "Resolution: %d / %d\n"
+			   "Control: %d s / %d (%#x) ticks\n"
+			   "Current: %d s / %d (%#x) ticks\n"
+			   "Busy count: %lu\n",
+			   res, wdt->resolution,
+			   ctl_sec, ctl, ctl,
+			   cur_sec, cur, cur,
+			   wdt->busy_count);
+	}
+
+	return 0;
+}
+
+static int bcm_kona_dbg_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, bcm_kona_wdt_dbg_show, inode->i_private);
+}
+
+static const struct file_operations bcm_kona_dbg_operations = {
+	.open		= bcm_kona_dbg_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void bcm_kona_wdt_debug_init(struct platform_device *pdev)
+{
+	struct dentry *dir;
+	struct bcm_kona_wdt *wdt = platform_get_drvdata(pdev);
+
+	if (!wdt)
+		return;
+
+	wdt->debugfs = NULL;
+
+	dir = debugfs_create_dir(BCM_KONA_WDT_NAME, NULL);
+	if (IS_ERR_OR_NULL(dir))
+		return;
+
+	if (debugfs_create_file("info", S_IFREG | S_IRUGO, dir, wdt,
+				&bcm_kona_dbg_operations))
+		wdt->debugfs = dir;
+	else
+		debugfs_remove_recursive(dir);
+}
+
+static void bcm_kona_wdt_debug_exit(struct platform_device *pdev)
+{
+	struct bcm_kona_wdt *wdt = platform_get_drvdata(pdev);
+
+	if (wdt && wdt->debugfs) {
+		debugfs_remove_recursive(wdt->debugfs);
+		wdt->debugfs = NULL;
+	}
+}
+
+#else
+
+static void bcm_kona_wdt_debug_init(struct platform_device *pdev) {}
+static void bcm_kona_wdt_debug_exit(struct platform_device *pdev) {}
+
+#endif /* CONFIG_BCM_KONA_WDT_DEBUG */
+
+static int bcm_kona_wdt_ctrl_reg_modify(struct bcm_kona_wdt *wdt,
+					unsigned mask, unsigned newval)
+{
+	int val;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&wdt->lock, flags);
+
+	val = secure_register_read(wdt, SECWDOG_CTRL_REG);
+	if (val < 0) {
+		ret = val;
+	} else {
+		val &= ~mask;
+		val |= newval;
+		writel_relaxed(val, wdt->base + SECWDOG_CTRL_REG);
+	}
+
+	spin_unlock_irqrestore(&wdt->lock, flags);
+
+	return ret;
+}
+
+static int bcm_kona_wdt_set_resolution_reg(struct bcm_kona_wdt *wdt)
+{
+	if (wdt->resolution > SECWDOG_MAX_RES)
+		return -EINVAL;
+
+	return bcm_kona_wdt_ctrl_reg_modify(wdt, SECWDOG_RES_MASK,
+					wdt->resolution << SECWDOG_CLKS_SHIFT);
+}
+
+static int bcm_kona_wdt_set_timeout_reg(struct watchdog_device *wdog,
+					unsigned watchdog_flags)
+{
+	struct bcm_kona_wdt *wdt = watchdog_get_drvdata(wdog);
+
+	return bcm_kona_wdt_ctrl_reg_modify(wdt, SECWDOG_COUNT_MASK,
+					SECS_TO_TICKS(wdog->timeout, wdt) |
+					watchdog_flags);
+}
+
+static int bcm_kona_wdt_set_timeout(struct watchdog_device *wdog,
+	unsigned int t)
+{
+	wdog->timeout = t;
+	return 0;
+}
+
+static unsigned int bcm_kona_wdt_get_timeleft(struct watchdog_device *wdog)
+{
+	struct bcm_kona_wdt *wdt = watchdog_get_drvdata(wdog);
+	int val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdt->lock, flags);
+	val = secure_register_read(wdt, SECWDOG_COUNT_REG);
+	spin_unlock_irqrestore(&wdt->lock, flags);
+
+	if (val < 0)
+		return val;
+
+	return TICKS_TO_SECS(val & SECWDOG_COUNT_MASK, wdt);
+}
+
+static int bcm_kona_wdt_start(struct watchdog_device *wdog)
+{
+	return bcm_kona_wdt_set_timeout_reg(wdog,
+					SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK);
+}
+
+static int bcm_kona_wdt_stop(struct watchdog_device *wdog)
+{
+	struct bcm_kona_wdt *wdt = watchdog_get_drvdata(wdog);
+
+	return bcm_kona_wdt_ctrl_reg_modify(wdt, SECWDOG_EN_MASK |
+					    SECWDOG_SRSTEN_MASK, 0);
+}
+
+static const struct watchdog_ops bcm_kona_wdt_ops = {
+	.owner =	THIS_MODULE,
+	.start =	bcm_kona_wdt_start,
+	.stop =		bcm_kona_wdt_stop,
+	.set_timeout =	bcm_kona_wdt_set_timeout,
+	.get_timeleft =	bcm_kona_wdt_get_timeleft,
+};
+
+static const struct watchdog_info bcm_kona_wdt_info = {
+	.options =	WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
+			WDIOF_KEEPALIVEPING,
+	.identity =	"Broadcom Kona Watchdog Timer",
+};
+
+static struct watchdog_device bcm_kona_wdt_wdd = {
+	.info =		&bcm_kona_wdt_info,
+	.ops =		&bcm_kona_wdt_ops,
+	.min_timeout =	1,
+	.max_timeout =	SECWDOG_MAX_COUNT >> SECWDOG_DEFAULT_RESOLUTION,
+	.timeout =	SECWDOG_MAX_COUNT >> SECWDOG_DEFAULT_RESOLUTION,
+};
+
+static void bcm_kona_wdt_shutdown(struct platform_device *pdev)
+{
+	bcm_kona_wdt_stop(&bcm_kona_wdt_wdd);
+}
+
+static int bcm_kona_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct bcm_kona_wdt *wdt;
+	struct resource *res;
+	int ret;
+
+	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	spin_lock_init(&wdt->lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(wdt->base))
+		return -ENODEV;
+
+	wdt->resolution = SECWDOG_DEFAULT_RESOLUTION;
+	ret = bcm_kona_wdt_set_resolution_reg(wdt);
+	if (ret) {
+		dev_err(dev, "Failed to set resolution (error: %d)", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, wdt);
+	watchdog_set_drvdata(&bcm_kona_wdt_wdd, wdt);
+	bcm_kona_wdt_wdd.parent = &pdev->dev;
+
+	ret = bcm_kona_wdt_set_timeout_reg(&bcm_kona_wdt_wdd, 0);
+	if (ret) {
+		dev_err(dev, "Failed set watchdog timeout");
+		return ret;
+	}
+
+	ret = watchdog_register_device(&bcm_kona_wdt_wdd);
+	if (ret) {
+		dev_err(dev, "Failed to register watchdog device");
+		return ret;
+	}
+
+	bcm_kona_wdt_debug_init(pdev);
+	dev_dbg(dev, "Broadcom Kona Watchdog Timer");
+
+	return 0;
+}
+
+static int bcm_kona_wdt_remove(struct platform_device *pdev)
+{
+	bcm_kona_wdt_debug_exit(pdev);
+	bcm_kona_wdt_shutdown(pdev);
+	watchdog_unregister_device(&bcm_kona_wdt_wdd);
+	dev_dbg(&pdev->dev, "Watchdog driver disabled");
+
+	return 0;
+}
+
+static const struct of_device_id bcm_kona_wdt_of_match[] = {
+	{ .compatible = "brcm,kona-wdt", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm_kona_wdt_of_match);
+
+static struct platform_driver bcm_kona_wdt_driver = {
+	.driver = {
+			.name = BCM_KONA_WDT_NAME,
+			.of_match_table = bcm_kona_wdt_of_match,
+		  },
+	.probe = bcm_kona_wdt_probe,
+	.remove = bcm_kona_wdt_remove,
+	.shutdown = bcm_kona_wdt_shutdown,
+};
+
+module_platform_driver(bcm_kona_wdt_driver);
+
+MODULE_ALIAS("platform:" BCM_KONA_WDT_NAME);
+MODULE_AUTHOR("Markus Mayer <mmayer@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom Kona Watchdog Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
new file mode 100644
index 000000000..3ad1e44be
--- /dev/null
+++ b/drivers/watchdog/booke_wdt.c
@@ -0,0 +1,243 @@
+/*
+ * Watchdog timer for PowerPC Book-E systems
+ *
+ * Author: Matthew McClintock
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * Copyright 2005, 2008, 2010-2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/watchdog.h>
+
+#include <asm/reg_booke.h>
+#include <asm/time.h>
+#include <asm/div64.h>
+
+/* If the kernel parameter wdt=1, the watchdog will be enabled at boot.
+ * Also, the wdt_period sets the watchdog timer period timeout.
+ * For E500 cpus the wdt_period sets which bit changing from 0->1 will
+ * trigger a watchog timeout. This watchdog timeout will occur 3 times, the
+ * first time nothing will happen, the second time a watchdog exception will
+ * occur, and the final time the board will reset.
+ */
+
+
+#ifdef	CONFIG_PPC_FSL_BOOK3E
+#define WDTP(x)		((((x)&0x3)<<30)|(((x)&0x3c)<<15))
+#define WDTP_MASK	(WDTP(0x3f))
+#else
+#define WDTP(x)		(TCR_WP(x))
+#define WDTP_MASK	(TCR_WP_MASK)
+#endif
+
+static bool booke_wdt_enabled;
+module_param(booke_wdt_enabled, bool, 0);
+static int  booke_wdt_period = CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT;
+module_param(booke_wdt_period, int, 0);
+
+#ifdef CONFIG_PPC_FSL_BOOK3E
+
+/* For the specified period, determine the number of seconds
+ * corresponding to the reset time.  There will be a watchdog
+ * exception at approximately 3/5 of this time.
+ *
+ * The formula to calculate this is given by:
+ * 2.5 * (2^(63-period+1)) / timebase_freq
+ *
+ * In order to simplify things, we assume that period is
+ * at least 1.  This will still result in a very long timeout.
+ */
+static unsigned long long period_to_sec(unsigned int period)
+{
+	unsigned long long tmp = 1ULL << (64 - period);
+	unsigned long tmp2 = ppc_tb_freq;
+
+	/* tmp may be a very large number and we don't want to overflow,
+	 * so divide the timebase freq instead of multiplying tmp
+	 */
+	tmp2 = tmp2 / 5 * 2;
+
+	do_div(tmp, tmp2);
+	return tmp;
+}
+
+/*
+ * This procedure will find the highest period which will give a timeout
+ * greater than the one required. e.g. for a bus speed of 66666666 and
+ * and a parameter of 2 secs, then this procedure will return a value of 38.
+ */
+static unsigned int sec_to_period(unsigned int secs)
+{
+	unsigned int period;
+	for (period = 63; period > 0; period--) {
+		if (period_to_sec(period) >= secs)
+			return period;
+	}
+	return 0;
+}
+
+#define MAX_WDT_TIMEOUT		period_to_sec(1)
+
+#else /* CONFIG_PPC_FSL_BOOK3E */
+
+static unsigned long long period_to_sec(unsigned int period)
+{
+	return period;
+}
+
+static unsigned int sec_to_period(unsigned int secs)
+{
+	return secs;
+}
+
+#define MAX_WDT_TIMEOUT		3	/* from Kconfig */
+
+#endif /* !CONFIG_PPC_FSL_BOOK3E */
+
+static void __booke_wdt_set(void *data)
+{
+	u32 val;
+	struct watchdog_device *wdog = data;
+
+	val = mfspr(SPRN_TCR);
+	val &= ~WDTP_MASK;
+	val |= WDTP(sec_to_period(wdog->timeout));
+
+	mtspr(SPRN_TCR, val);
+}
+
+static void booke_wdt_set(void *data)
+{
+	on_each_cpu(__booke_wdt_set, data, 0);
+}
+
+static void __booke_wdt_ping(void *data)
+{
+	mtspr(SPRN_TSR, TSR_ENW|TSR_WIS);
+}
+
+static int booke_wdt_ping(struct watchdog_device *wdog)
+{
+	on_each_cpu(__booke_wdt_ping, NULL, 0);
+
+	return 0;
+}
+
+static void __booke_wdt_enable(void *data)
+{
+	u32 val;
+	struct watchdog_device *wdog = data;
+
+	/* clear status before enabling watchdog */
+	__booke_wdt_ping(NULL);
+	val = mfspr(SPRN_TCR);
+	val &= ~WDTP_MASK;
+	val |= (TCR_WIE|TCR_WRC(WRC_CHIP)|WDTP(sec_to_period(wdog->timeout)));
+
+	mtspr(SPRN_TCR, val);
+}
+
+/**
+ * booke_wdt_disable - disable the watchdog on the given CPU
+ *
+ * This function is called on each CPU.  It disables the watchdog on that CPU.
+ *
+ * TCR[WRC] cannot be changed once it has been set to non-zero, but we can
+ * effectively disable the watchdog by setting its period to the maximum value.
+ */
+static void __booke_wdt_disable(void *data)
+{
+	u32 val;
+
+	val = mfspr(SPRN_TCR);
+	val &= ~(TCR_WIE | WDTP_MASK);
+	mtspr(SPRN_TCR, val);
+
+	/* clear status to make sure nothing is pending */
+	__booke_wdt_ping(NULL);
+
+}
+
+static int booke_wdt_start(struct watchdog_device *wdog)
+{
+	on_each_cpu(__booke_wdt_enable, wdog, 0);
+	pr_debug("watchdog enabled (timeout = %u sec)\n", wdog->timeout);
+
+	return 0;
+}
+
+static int booke_wdt_stop(struct watchdog_device *wdog)
+{
+	on_each_cpu(__booke_wdt_disable, NULL, 0);
+	pr_debug("watchdog disabled\n");
+
+	return 0;
+}
+
+static int booke_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				 unsigned int timeout)
+{
+	wdt_dev->timeout = timeout;
+	booke_wdt_set(wdt_dev);
+
+	return 0;
+}
+
+static struct watchdog_info booke_wdt_info __ro_after_init = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.identity = "PowerPC Book-E Watchdog",
+};
+
+static const struct watchdog_ops booke_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = booke_wdt_start,
+	.stop = booke_wdt_stop,
+	.ping = booke_wdt_ping,
+	.set_timeout = booke_wdt_set_timeout,
+};
+
+static struct watchdog_device booke_wdt_dev = {
+	.info = &booke_wdt_info,
+	.ops = &booke_wdt_ops,
+	.min_timeout = 1,
+};
+
+static void __exit booke_wdt_exit(void)
+{
+	watchdog_unregister_device(&booke_wdt_dev);
+}
+
+static int __init booke_wdt_init(void)
+{
+	int ret = 0;
+	bool nowayout = WATCHDOG_NOWAYOUT;
+
+	pr_info("powerpc book-e watchdog driver loaded\n");
+	booke_wdt_info.firmware_version = cur_cpu_spec->pvr_value;
+	booke_wdt_set_timeout(&booke_wdt_dev,
+			      period_to_sec(booke_wdt_period));
+	watchdog_set_nowayout(&booke_wdt_dev, nowayout);
+	booke_wdt_dev.max_timeout = MAX_WDT_TIMEOUT;
+	if (booke_wdt_enabled)
+		booke_wdt_start(&booke_wdt_dev);
+
+	ret = watchdog_register_device(&booke_wdt_dev);
+
+	return ret;
+}
+
+module_init(booke_wdt_init);
+module_exit(booke_wdt_exit);
+
+MODULE_ALIAS("booke_wdt");
+MODULE_DESCRIPTION("PowerPC Book-E watchdog driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/cadence_wdt.c b/drivers/watchdog/cadence_wdt.c
new file mode 100644
index 000000000..c3924356d
--- /dev/null
+++ b/drivers/watchdog/cadence_wdt.c
@@ -0,0 +1,478 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Cadence WDT driver - Used by Xilinx Zynq
+ *
+ * Copyright (C) 2010 - 2014 Xilinx, Inc.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define CDNS_WDT_DEFAULT_TIMEOUT	10
+/* Supports 1 - 516 sec */
+#define CDNS_WDT_MIN_TIMEOUT	1
+#define CDNS_WDT_MAX_TIMEOUT	516
+
+/* Restart key */
+#define CDNS_WDT_RESTART_KEY 0x00001999
+
+/* Counter register access key */
+#define CDNS_WDT_REGISTER_ACCESS_KEY 0x00920000
+
+/* Counter value divisor */
+#define CDNS_WDT_COUNTER_VALUE_DIVISOR 0x1000
+
+/* Clock prescaler value and selection */
+#define CDNS_WDT_PRESCALE_64	64
+#define CDNS_WDT_PRESCALE_512	512
+#define CDNS_WDT_PRESCALE_4096	4096
+#define CDNS_WDT_PRESCALE_SELECT_64	1
+#define CDNS_WDT_PRESCALE_SELECT_512	2
+#define CDNS_WDT_PRESCALE_SELECT_4096	3
+
+/* Input clock frequency */
+#define CDNS_WDT_CLK_10MHZ	10000000
+#define CDNS_WDT_CLK_75MHZ	75000000
+
+/* Counter maximum value */
+#define CDNS_WDT_COUNTER_MAX 0xFFF
+
+static int wdt_timeout;
+static int nowayout = WATCHDOG_NOWAYOUT;
+
+module_param(wdt_timeout, int, 0644);
+MODULE_PARM_DESC(wdt_timeout,
+		 "Watchdog time in seconds. (default="
+		 __MODULE_STRING(CDNS_WDT_DEFAULT_TIMEOUT) ")");
+
+module_param(nowayout, int, 0644);
+MODULE_PARM_DESC(nowayout,
+		 "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/**
+ * struct cdns_wdt - Watchdog device structure
+ * @regs: baseaddress of device
+ * @rst: reset flag
+ * @clk: struct clk * of a clock source
+ * @prescaler: for saving prescaler value
+ * @ctrl_clksel: counter clock prescaler selection
+ * @io_lock: spinlock for IO register access
+ * @cdns_wdt_device: watchdog device structure
+ *
+ * Structure containing parameters specific to cadence watchdog.
+ */
+struct cdns_wdt {
+	void __iomem		*regs;
+	bool			rst;
+	struct clk		*clk;
+	u32			prescaler;
+	u32			ctrl_clksel;
+	spinlock_t		io_lock;
+	struct watchdog_device	cdns_wdt_device;
+};
+
+/* Write access to Registers */
+static inline void cdns_wdt_writereg(struct cdns_wdt *wdt, u32 offset, u32 val)
+{
+	writel_relaxed(val, wdt->regs + offset);
+}
+
+/*************************Register Map**************************************/
+
+/* Register Offsets for the WDT */
+#define CDNS_WDT_ZMR_OFFSET	0x0	/* Zero Mode Register */
+#define CDNS_WDT_CCR_OFFSET	0x4	/* Counter Control Register */
+#define CDNS_WDT_RESTART_OFFSET	0x8	/* Restart Register */
+#define CDNS_WDT_SR_OFFSET	0xC	/* Status Register */
+
+/*
+ * Zero Mode Register - This register controls how the time out is indicated
+ * and also contains the access code to allow writes to the register (0xABC).
+ */
+#define CDNS_WDT_ZMR_WDEN_MASK	0x00000001 /* Enable the WDT */
+#define CDNS_WDT_ZMR_RSTEN_MASK	0x00000002 /* Enable the reset output */
+#define CDNS_WDT_ZMR_IRQEN_MASK	0x00000004 /* Enable IRQ output */
+#define CDNS_WDT_ZMR_RSTLEN_16	0x00000030 /* Reset pulse of 16 pclk cycles */
+#define CDNS_WDT_ZMR_ZKEY_VAL	0x00ABC000 /* Access key, 0xABC << 12 */
+/*
+ * Counter Control register - This register controls how fast the timer runs
+ * and the reset value and also contains the access code to allow writes to
+ * the register.
+ */
+#define CDNS_WDT_CCR_CRV_MASK	0x00003FFC /* Counter reset value */
+
+/**
+ * cdns_wdt_stop - Stop the watchdog.
+ *
+ * @wdd: watchdog device
+ *
+ * Read the contents of the ZMR register, clear the WDEN bit
+ * in the register and set the access key for successful write.
+ *
+ * Return: always 0
+ */
+static int cdns_wdt_stop(struct watchdog_device *wdd)
+{
+	struct cdns_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	spin_lock(&wdt->io_lock);
+	cdns_wdt_writereg(wdt, CDNS_WDT_ZMR_OFFSET,
+			  CDNS_WDT_ZMR_ZKEY_VAL & (~CDNS_WDT_ZMR_WDEN_MASK));
+	spin_unlock(&wdt->io_lock);
+
+	return 0;
+}
+
+/**
+ * cdns_wdt_reload - Reload the watchdog timer (i.e. pat the watchdog).
+ *
+ * @wdd: watchdog device
+ *
+ * Write the restart key value (0x00001999) to the restart register.
+ *
+ * Return: always 0
+ */
+static int cdns_wdt_reload(struct watchdog_device *wdd)
+{
+	struct cdns_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	spin_lock(&wdt->io_lock);
+	cdns_wdt_writereg(wdt, CDNS_WDT_RESTART_OFFSET,
+			  CDNS_WDT_RESTART_KEY);
+	spin_unlock(&wdt->io_lock);
+
+	return 0;
+}
+
+/**
+ * cdns_wdt_start - Enable and start the watchdog.
+ *
+ * @wdd: watchdog device
+ *
+ * The counter value is calculated according to the formula:
+ *		calculated count = (timeout * clock) / prescaler + 1.
+ * The calculated count is divided by 0x1000 to obtain the field value
+ * to write to counter control register.
+ * Clears the contents of prescaler and counter reset value. Sets the
+ * prescaler to 4096 and the calculated count and access key
+ * to write to CCR Register.
+ * Sets the WDT (WDEN bit) and either the Reset signal(RSTEN bit)
+ * or Interrupt signal(IRQEN) with a specified cycles and the access
+ * key to write to ZMR Register.
+ *
+ * Return: always 0
+ */
+static int cdns_wdt_start(struct watchdog_device *wdd)
+{
+	struct cdns_wdt *wdt = watchdog_get_drvdata(wdd);
+	unsigned int data = 0;
+	unsigned short count;
+	unsigned long clock_f = clk_get_rate(wdt->clk);
+
+	/*
+	 * Counter value divisor to obtain the value of
+	 * counter reset to be written to control register.
+	 */
+	count = (wdd->timeout * (clock_f / wdt->prescaler)) /
+		 CDNS_WDT_COUNTER_VALUE_DIVISOR + 1;
+
+	if (count > CDNS_WDT_COUNTER_MAX)
+		count = CDNS_WDT_COUNTER_MAX;
+
+	spin_lock(&wdt->io_lock);
+	cdns_wdt_writereg(wdt, CDNS_WDT_ZMR_OFFSET,
+			  CDNS_WDT_ZMR_ZKEY_VAL);
+
+	count = (count << 2) & CDNS_WDT_CCR_CRV_MASK;
+
+	/* Write counter access key first to be able write to register */
+	data = count | CDNS_WDT_REGISTER_ACCESS_KEY | wdt->ctrl_clksel;
+	cdns_wdt_writereg(wdt, CDNS_WDT_CCR_OFFSET, data);
+	data = CDNS_WDT_ZMR_WDEN_MASK | CDNS_WDT_ZMR_RSTLEN_16 |
+	       CDNS_WDT_ZMR_ZKEY_VAL;
+
+	/* Reset on timeout if specified in device tree. */
+	if (wdt->rst) {
+		data |= CDNS_WDT_ZMR_RSTEN_MASK;
+		data &= ~CDNS_WDT_ZMR_IRQEN_MASK;
+	} else {
+		data &= ~CDNS_WDT_ZMR_RSTEN_MASK;
+		data |= CDNS_WDT_ZMR_IRQEN_MASK;
+	}
+	cdns_wdt_writereg(wdt, CDNS_WDT_ZMR_OFFSET, data);
+	cdns_wdt_writereg(wdt, CDNS_WDT_RESTART_OFFSET,
+			  CDNS_WDT_RESTART_KEY);
+	spin_unlock(&wdt->io_lock);
+
+	return 0;
+}
+
+/**
+ * cdns_wdt_settimeout - Set a new timeout value for the watchdog device.
+ *
+ * @wdd: watchdog device
+ * @new_time: new timeout value that needs to be set
+ * Return: 0 on success
+ *
+ * Update the watchdog_device timeout with new value which is used when
+ * cdns_wdt_start is called.
+ */
+static int cdns_wdt_settimeout(struct watchdog_device *wdd,
+			       unsigned int new_time)
+{
+	wdd->timeout = new_time;
+
+	return cdns_wdt_start(wdd);
+}
+
+/**
+ * cdns_wdt_irq_handler - Notifies of watchdog timeout.
+ *
+ * @irq: interrupt number
+ * @dev_id: pointer to a platform device structure
+ * Return: IRQ_HANDLED
+ *
+ * The handler is invoked when the watchdog times out and a
+ * reset on timeout has not been enabled.
+ */
+static irqreturn_t cdns_wdt_irq_handler(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+
+	dev_info(&pdev->dev,
+		 "Watchdog timed out. Internal reset not enabled\n");
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Info structure used to indicate the features supported by the device
+ * to the upper layers. This is defined in watchdog.h header file.
+ */
+static const struct watchdog_info cdns_wdt_info = {
+	.identity	= "cdns_wdt watchdog",
+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+			  WDIOF_MAGICCLOSE,
+};
+
+/* Watchdog Core Ops */
+static const struct watchdog_ops cdns_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = cdns_wdt_start,
+	.stop = cdns_wdt_stop,
+	.ping = cdns_wdt_reload,
+	.set_timeout = cdns_wdt_settimeout,
+};
+
+/************************Platform Operations*****************************/
+/**
+ * cdns_wdt_probe - Probe call for the device.
+ *
+ * @pdev: handle to the platform device structure.
+ * Return: 0 on success, negative error otherwise.
+ *
+ * It does all the memory allocation and registration for the device.
+ */
+static int cdns_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	int ret, irq;
+	unsigned long clock_f;
+	struct cdns_wdt *wdt;
+	struct watchdog_device *cdns_wdt_device;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	cdns_wdt_device = &wdt->cdns_wdt_device;
+	cdns_wdt_device->info = &cdns_wdt_info;
+	cdns_wdt_device->ops = &cdns_wdt_ops;
+	cdns_wdt_device->timeout = CDNS_WDT_DEFAULT_TIMEOUT;
+	cdns_wdt_device->min_timeout = CDNS_WDT_MIN_TIMEOUT;
+	cdns_wdt_device->max_timeout = CDNS_WDT_MAX_TIMEOUT;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(wdt->regs))
+		return PTR_ERR(wdt->regs);
+
+	/* Register the interrupt */
+	wdt->rst = of_property_read_bool(pdev->dev.of_node, "reset-on-timeout");
+	irq = platform_get_irq(pdev, 0);
+	if (!wdt->rst && irq >= 0) {
+		ret = devm_request_irq(&pdev->dev, irq, cdns_wdt_irq_handler, 0,
+				       pdev->name, pdev);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"cannot register interrupt handler err=%d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	/* Initialize the members of cdns_wdt structure */
+	cdns_wdt_device->parent = &pdev->dev;
+
+	ret = watchdog_init_timeout(cdns_wdt_device, wdt_timeout, &pdev->dev);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to set timeout value\n");
+		return ret;
+	}
+
+	watchdog_set_nowayout(cdns_wdt_device, nowayout);
+	watchdog_stop_on_reboot(cdns_wdt_device);
+	watchdog_set_drvdata(cdns_wdt_device, wdt);
+
+	wdt->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(wdt->clk)) {
+		dev_err(&pdev->dev, "input clock not found\n");
+		ret = PTR_ERR(wdt->clk);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(wdt->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to enable clock\n");
+		return ret;
+	}
+
+	clock_f = clk_get_rate(wdt->clk);
+	if (clock_f <= CDNS_WDT_CLK_75MHZ) {
+		wdt->prescaler = CDNS_WDT_PRESCALE_512;
+		wdt->ctrl_clksel = CDNS_WDT_PRESCALE_SELECT_512;
+	} else {
+		wdt->prescaler = CDNS_WDT_PRESCALE_4096;
+		wdt->ctrl_clksel = CDNS_WDT_PRESCALE_SELECT_4096;
+	}
+
+	spin_lock_init(&wdt->io_lock);
+
+	ret = watchdog_register_device(cdns_wdt_device);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register wdt device\n");
+		goto err_clk_disable;
+	}
+	platform_set_drvdata(pdev, wdt);
+
+	dev_info(&pdev->dev, "Xilinx Watchdog Timer at %p with timeout %ds%s\n",
+		 wdt->regs, cdns_wdt_device->timeout,
+		 nowayout ? ", nowayout" : "");
+
+	return 0;
+
+err_clk_disable:
+	clk_disable_unprepare(wdt->clk);
+
+	return ret;
+}
+
+/**
+ * cdns_wdt_remove - Probe call for the device.
+ *
+ * @pdev: handle to the platform device structure.
+ * Return: 0 on success, otherwise negative error.
+ *
+ * Unregister the device after releasing the resources.
+ */
+static int cdns_wdt_remove(struct platform_device *pdev)
+{
+	struct cdns_wdt *wdt = platform_get_drvdata(pdev);
+
+	cdns_wdt_stop(&wdt->cdns_wdt_device);
+	watchdog_unregister_device(&wdt->cdns_wdt_device);
+	clk_disable_unprepare(wdt->clk);
+
+	return 0;
+}
+
+/**
+ * cdns_wdt_shutdown - Stop the device.
+ *
+ * @pdev: handle to the platform structure.
+ *
+ */
+static void cdns_wdt_shutdown(struct platform_device *pdev)
+{
+	struct cdns_wdt *wdt = platform_get_drvdata(pdev);
+
+	cdns_wdt_stop(&wdt->cdns_wdt_device);
+	clk_disable_unprepare(wdt->clk);
+}
+
+/**
+ * cdns_wdt_suspend - Stop the device.
+ *
+ * @dev: handle to the device structure.
+ * Return: 0 always.
+ */
+static int __maybe_unused cdns_wdt_suspend(struct device *dev)
+{
+	struct cdns_wdt *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->cdns_wdt_device)) {
+		cdns_wdt_stop(&wdt->cdns_wdt_device);
+		clk_disable_unprepare(wdt->clk);
+	}
+
+	return 0;
+}
+
+/**
+ * cdns_wdt_resume - Resume the device.
+ *
+ * @dev: handle to the device structure.
+ * Return: 0 on success, errno otherwise.
+ */
+static int __maybe_unused cdns_wdt_resume(struct device *dev)
+{
+	int ret;
+	struct cdns_wdt *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->cdns_wdt_device)) {
+		ret = clk_prepare_enable(wdt->clk);
+		if (ret) {
+			dev_err(dev, "unable to enable clock\n");
+			return ret;
+		}
+		cdns_wdt_start(&wdt->cdns_wdt_device);
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(cdns_wdt_pm_ops, cdns_wdt_suspend, cdns_wdt_resume);
+
+static const struct of_device_id cdns_wdt_of_match[] = {
+	{ .compatible = "cdns,wdt-r1p2", },
+	{ /* end of table */ }
+};
+MODULE_DEVICE_TABLE(of, cdns_wdt_of_match);
+
+/* Driver Structure */
+static struct platform_driver cdns_wdt_driver = {
+	.probe		= cdns_wdt_probe,
+	.remove		= cdns_wdt_remove,
+	.shutdown	= cdns_wdt_shutdown,
+	.driver		= {
+		.name	= "cdns-wdt",
+		.of_match_table = cdns_wdt_of_match,
+		.pm	= &cdns_wdt_pm_ops,
+	},
+};
+
+module_platform_driver(cdns_wdt_driver);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Watchdog driver for Cadence WDT");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
new file mode 100644
index 000000000..f29d1edc5
--- /dev/null
+++ b/drivers/watchdog/coh901327_wdt.c
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * coh901327_wdt.c
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * Watchdog driver for the ST-Ericsson AB COH 901 327 IP core
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+
+#define DRV_NAME "WDOG COH 901 327"
+
+/*
+ * COH 901 327 register definitions
+ */
+
+/* WDOG_FEED Register 32bit (-/W) */
+#define U300_WDOG_FR							0x00
+#define U300_WDOG_FR_FEED_RESTART_TIMER					0xFEEDU
+/* WDOG_TIMEOUT Register 32bit (R/W) */
+#define U300_WDOG_TR							0x04
+#define U300_WDOG_TR_TIMEOUT_MASK					0x7FFFU
+/* WDOG_DISABLE1 Register 32bit (-/W) */
+#define U300_WDOG_D1R							0x08
+#define U300_WDOG_D1R_DISABLE1_DISABLE_TIMER				0x2BADU
+/* WDOG_DISABLE2 Register 32bit (R/W) */
+#define U300_WDOG_D2R							0x0C
+#define U300_WDOG_D2R_DISABLE2_DISABLE_TIMER				0xCAFEU
+#define U300_WDOG_D2R_DISABLE_STATUS_DISABLED				0xDABEU
+#define U300_WDOG_D2R_DISABLE_STATUS_ENABLED				0x0000U
+/* WDOG_STATUS Register 32bit (R/W) */
+#define U300_WDOG_SR							0x10
+#define U300_WDOG_SR_STATUS_TIMED_OUT					0xCFE8U
+#define U300_WDOG_SR_STATUS_NORMAL					0x0000U
+#define U300_WDOG_SR_RESET_STATUS_RESET					0xE8B4U
+/* WDOG_COUNT Register 32bit (R/-) */
+#define U300_WDOG_CR							0x14
+#define U300_WDOG_CR_VALID_IND						0x8000U
+#define U300_WDOG_CR_VALID_STABLE					0x0000U
+#define U300_WDOG_CR_COUNT_VALUE_MASK					0x7FFFU
+/* WDOG_JTAGOVR Register 32bit (R/W) */
+#define U300_WDOG_JOR							0x18
+#define U300_WDOG_JOR_JTAG_MODE_IND					0x0002U
+#define U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE				0x0001U
+/* WDOG_RESTART Register 32bit (-/W) */
+#define U300_WDOG_RR							0x1C
+#define U300_WDOG_RR_RESTART_VALUE_RESUME				0xACEDU
+/* WDOG_IRQ_EVENT Register 32bit (R/W) */
+#define U300_WDOG_IER							0x20
+#define U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND				0x0001U
+#define U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE				0x0001U
+/* WDOG_IRQ_MASK Register 32bit (R/W) */
+#define U300_WDOG_IMR							0x24
+#define U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE				0x0001U
+/* WDOG_IRQ_FORCE Register 32bit (R/W) */
+#define U300_WDOG_IFR							0x28
+#define U300_WDOG_IFR_WILL_BARK_IRQ_FORCE_ENABLE			0x0001U
+
+/* Default timeout in seconds = 1 minute */
+#define U300_WDOG_DEFAULT_TIMEOUT					60
+
+static unsigned int margin;
+static int irq;
+static void __iomem *virtbase;
+static struct device *parent;
+
+static struct clk *clk;
+
+/*
+ * Enabling and disabling functions.
+ */
+static void coh901327_enable(u16 timeout)
+{
+	u16 val;
+	unsigned long freq;
+	unsigned long delay_ns;
+
+	/* Restart timer if it is disabled */
+	val = readw(virtbase + U300_WDOG_D2R);
+	if (val == U300_WDOG_D2R_DISABLE_STATUS_DISABLED)
+		writew(U300_WDOG_RR_RESTART_VALUE_RESUME,
+		       virtbase + U300_WDOG_RR);
+	/* Acknowledge any pending interrupt so it doesn't just fire off */
+	writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
+	       virtbase + U300_WDOG_IER);
+	/*
+	 * The interrupt is cleared in the 32 kHz clock domain.
+	 * Wait 3 32 kHz cycles for it to take effect
+	 */
+	freq = clk_get_rate(clk);
+	delay_ns = DIV_ROUND_UP(1000000000, freq); /* Freq to ns and round up */
+	delay_ns = 3 * delay_ns; /* Wait 3 cycles */
+	ndelay(delay_ns);
+	/* Enable the watchdog interrupt */
+	writew(U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE, virtbase + U300_WDOG_IMR);
+	/* Activate the watchdog timer */
+	writew(timeout, virtbase + U300_WDOG_TR);
+	/* Start the watchdog timer */
+	writew(U300_WDOG_FR_FEED_RESTART_TIMER, virtbase + U300_WDOG_FR);
+	/*
+	 * Extra read so that this change propagate in the watchdog.
+	 */
+	(void) readw(virtbase + U300_WDOG_CR);
+	val = readw(virtbase + U300_WDOG_D2R);
+	if (val != U300_WDOG_D2R_DISABLE_STATUS_ENABLED)
+		dev_err(parent,
+			"%s(): watchdog not enabled! D2R value %04x\n",
+			__func__, val);
+}
+
+static void coh901327_disable(void)
+{
+	u16 val;
+
+	/* Disable the watchdog interrupt if it is active */
+	writew(0x0000U, virtbase + U300_WDOG_IMR);
+	/* If the watchdog is currently enabled, attempt to disable it */
+	val = readw(virtbase + U300_WDOG_D2R);
+	if (val != U300_WDOG_D2R_DISABLE_STATUS_DISABLED) {
+		writew(U300_WDOG_D1R_DISABLE1_DISABLE_TIMER,
+		       virtbase + U300_WDOG_D1R);
+		writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER,
+		       virtbase + U300_WDOG_D2R);
+		/* Write this twice (else problems occur) */
+		writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER,
+		       virtbase + U300_WDOG_D2R);
+	}
+	val = readw(virtbase + U300_WDOG_D2R);
+	if (val != U300_WDOG_D2R_DISABLE_STATUS_DISABLED)
+		dev_err(parent,
+			"%s(): watchdog not disabled! D2R value %04x\n",
+			__func__, val);
+}
+
+static int coh901327_start(struct watchdog_device *wdt_dev)
+{
+	coh901327_enable(wdt_dev->timeout * 100);
+	return 0;
+}
+
+static int coh901327_stop(struct watchdog_device *wdt_dev)
+{
+	coh901327_disable();
+	return 0;
+}
+
+static int coh901327_ping(struct watchdog_device *wdd)
+{
+	/* Feed the watchdog */
+	writew(U300_WDOG_FR_FEED_RESTART_TIMER,
+	       virtbase + U300_WDOG_FR);
+	return 0;
+}
+
+static int coh901327_settimeout(struct watchdog_device *wdt_dev,
+				unsigned int time)
+{
+	wdt_dev->timeout = time;
+	/* Set new timeout value */
+	writew(time * 100, virtbase + U300_WDOG_TR);
+	/* Feed the dog */
+	writew(U300_WDOG_FR_FEED_RESTART_TIMER,
+	       virtbase + U300_WDOG_FR);
+	return 0;
+}
+
+static unsigned int coh901327_gettimeleft(struct watchdog_device *wdt_dev)
+{
+	u16 val;
+
+	/* Read repeatedly until the value is stable! */
+	val = readw(virtbase + U300_WDOG_CR);
+	while (val & U300_WDOG_CR_VALID_IND)
+		val = readw(virtbase + U300_WDOG_CR);
+	val &= U300_WDOG_CR_COUNT_VALUE_MASK;
+	if (val != 0)
+		val /= 100;
+
+	return val;
+}
+
+/*
+ * This interrupt occurs 10 ms before the watchdog WILL bark.
+ */
+static irqreturn_t coh901327_interrupt(int irq, void *data)
+{
+	u16 val;
+
+	/*
+	 * Ack IRQ? If this occurs we're FUBAR anyway, so
+	 * just acknowledge, disable the interrupt and await the imminent end.
+	 * If you at some point need a host of callbacks to be called
+	 * when the system is about to watchdog-reset, add them here!
+	 *
+	 * NOTE: on future versions of this IP-block, it will be possible
+	 * to prevent a watchdog reset by feeding the watchdog at this
+	 * point.
+	 */
+	val = readw(virtbase + U300_WDOG_IER);
+	if (val == U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND)
+		writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
+		       virtbase + U300_WDOG_IER);
+	writew(0x0000U, virtbase + U300_WDOG_IMR);
+	dev_crit(parent, "watchdog is barking!\n");
+	return IRQ_HANDLED;
+}
+
+static const struct watchdog_info coh901327_ident = {
+	.options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.identity = DRV_NAME,
+};
+
+static const struct watchdog_ops coh901327_ops = {
+	.owner = THIS_MODULE,
+	.start = coh901327_start,
+	.stop = coh901327_stop,
+	.ping = coh901327_ping,
+	.set_timeout = coh901327_settimeout,
+	.get_timeleft = coh901327_gettimeleft,
+};
+
+static struct watchdog_device coh901327_wdt = {
+	.info = &coh901327_ident,
+	.ops = &coh901327_ops,
+	/*
+	 * Max timeout is 327 since the 10ms
+	 * timeout register is max
+	 * 0x7FFF = 327670ms ~= 327s.
+	 */
+	.min_timeout = 1,
+	.max_timeout = 327,
+	.timeout = U300_WDOG_DEFAULT_TIMEOUT,
+};
+
+static int __exit coh901327_remove(struct platform_device *pdev)
+{
+	watchdog_unregister_device(&coh901327_wdt);
+	coh901327_disable();
+	free_irq(irq, pdev);
+	clk_disable_unprepare(clk);
+	clk_put(clk);
+	return 0;
+}
+
+static int __init coh901327_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int ret;
+	u16 val;
+	struct resource *res;
+
+	parent = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	virtbase = devm_ioremap_resource(dev, res);
+	if (IS_ERR(virtbase))
+		return PTR_ERR(virtbase);
+
+	clk = clk_get(dev, NULL);
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		dev_err(dev, "could not get clock\n");
+		return ret;
+	}
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		dev_err(dev, "could not prepare and enable clock\n");
+		goto out_no_clk_enable;
+	}
+
+	val = readw(virtbase + U300_WDOG_SR);
+	switch (val) {
+	case U300_WDOG_SR_STATUS_TIMED_OUT:
+		dev_info(dev, "watchdog timed out since last chip reset!\n");
+		coh901327_wdt.bootstatus |= WDIOF_CARDRESET;
+		/* Status will be cleared below */
+		break;
+	case U300_WDOG_SR_STATUS_NORMAL:
+		dev_info(dev, "in normal status, no timeouts have occurred.\n");
+		break;
+	default:
+		dev_info(dev, "contains an illegal status code (%08x)\n", val);
+		break;
+	}
+
+	val = readw(virtbase + U300_WDOG_D2R);
+	switch (val) {
+	case U300_WDOG_D2R_DISABLE_STATUS_DISABLED:
+		dev_info(dev, "currently disabled.\n");
+		break;
+	case U300_WDOG_D2R_DISABLE_STATUS_ENABLED:
+		dev_info(dev, "currently enabled! (disabling it now)\n");
+		coh901327_disable();
+		break;
+	default:
+		dev_err(dev, "contains an illegal enable/disable code (%08x)\n",
+			val);
+		break;
+	}
+
+	/* Reset the watchdog */
+	writew(U300_WDOG_SR_RESET_STATUS_RESET, virtbase + U300_WDOG_SR);
+
+	irq = platform_get_irq(pdev, 0);
+	if (request_irq(irq, coh901327_interrupt, 0,
+			DRV_NAME " Bark", pdev)) {
+		ret = -EIO;
+		goto out_no_irq;
+	}
+
+	watchdog_init_timeout(&coh901327_wdt, margin, dev);
+
+	coh901327_wdt.parent = dev;
+	ret = watchdog_register_device(&coh901327_wdt);
+	if (ret)
+		goto out_no_wdog;
+
+	dev_info(dev, "initialized. (timeout=%d sec)\n",
+			coh901327_wdt.timeout);
+	return 0;
+
+out_no_wdog:
+	free_irq(irq, pdev);
+out_no_irq:
+	clk_disable_unprepare(clk);
+out_no_clk_enable:
+	clk_put(clk);
+	return ret;
+}
+
+#ifdef CONFIG_PM
+
+static u16 wdogenablestore;
+static u16 irqmaskstore;
+
+static int coh901327_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	irqmaskstore = readw(virtbase + U300_WDOG_IMR) & 0x0001U;
+	wdogenablestore = readw(virtbase + U300_WDOG_D2R);
+	/* If watchdog is on, disable it here and now */
+	if (wdogenablestore == U300_WDOG_D2R_DISABLE_STATUS_ENABLED)
+		coh901327_disable();
+	return 0;
+}
+
+static int coh901327_resume(struct platform_device *pdev)
+{
+	/* Restore the watchdog interrupt */
+	writew(irqmaskstore, virtbase + U300_WDOG_IMR);
+	if (wdogenablestore == U300_WDOG_D2R_DISABLE_STATUS_ENABLED) {
+		/* Restart the watchdog timer */
+		writew(U300_WDOG_RR_RESTART_VALUE_RESUME,
+		       virtbase + U300_WDOG_RR);
+		writew(U300_WDOG_FR_FEED_RESTART_TIMER,
+		       virtbase + U300_WDOG_FR);
+	}
+	return 0;
+}
+#else
+#define coh901327_suspend NULL
+#define coh901327_resume  NULL
+#endif
+
+/*
+ * Mistreating the watchdog is the only way to perform a software reset of the
+ * system on EMP platforms. So we implement this and export a symbol for it.
+ */
+void coh901327_watchdog_reset(void)
+{
+	/* Enable even if on JTAG too */
+	writew(U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE,
+	       virtbase + U300_WDOG_JOR);
+	/*
+	 * Timeout = 5s, we have to wait for the watchdog reset to
+	 * actually take place: the watchdog will be reloaded with the
+	 * default value immediately, so we HAVE to reboot and get back
+	 * into the kernel in 30s, or the device will reboot again!
+	 * The boot loader will typically deactivate the watchdog, so we
+	 * need time enough for the boot loader to get to the point of
+	 * deactivating the watchdog before it is shut down by it.
+	 *
+	 * NOTE: on future versions of the watchdog, this restriction is
+	 * gone: the watchdog will be reloaded with a default value (1 min)
+	 * instead of last value, and you can conveniently set the watchdog
+	 * timeout to 10ms (value = 1) without any problems.
+	 */
+	coh901327_enable(500);
+	/* Return and await doom */
+}
+
+static const struct of_device_id coh901327_dt_match[] = {
+	{ .compatible = "stericsson,coh901327" },
+	{},
+};
+
+static struct platform_driver coh901327_driver = {
+	.driver = {
+		.name	= "coh901327_wdog",
+		.of_match_table = coh901327_dt_match,
+	},
+	.remove		= __exit_p(coh901327_remove),
+	.suspend	= coh901327_suspend,
+	.resume		= coh901327_resume,
+};
+
+module_platform_driver_probe(coh901327_driver, coh901327_probe);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("COH 901 327 Watchdog");
+
+module_param(margin, uint, 0);
+MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:coh901327-watchdog");
diff --git a/drivers/watchdog/cpu5wdt.c b/drivers/watchdog/cpu5wdt.c
new file mode 100644
index 000000000..6cfb102c3
--- /dev/null
+++ b/drivers/watchdog/cpu5wdt.c
@@ -0,0 +1,299 @@
+/*
+ * sma cpu5 watchdog driver
+ *
+ * Copyright (C) 2003 Heiko Ronsdorf <hero@ihg.uni-duisburg.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+
+/* adjustable parameters */
+
+static int verbose;
+static int port = 0x91;
+static int ticks = 10000;
+static DEFINE_SPINLOCK(cpu5wdt_lock);
+
+#define PFX			"cpu5wdt: "
+
+#define CPU5WDT_EXTENT          0x0A
+
+#define CPU5WDT_STATUS_REG      0x00
+#define CPU5WDT_TIME_A_REG      0x02
+#define CPU5WDT_TIME_B_REG      0x03
+#define CPU5WDT_MODE_REG        0x04
+#define CPU5WDT_TRIGGER_REG     0x07
+#define CPU5WDT_ENABLE_REG      0x08
+#define CPU5WDT_RESET_REG       0x09
+
+#define CPU5WDT_INTERVAL	(HZ/10+1)
+
+/* some device data */
+
+static struct {
+	struct completion stop;
+	int running;
+	struct timer_list timer;
+	int queue;
+	int default_ticks;
+	unsigned long inuse;
+} cpu5wdt_device;
+
+/* generic helper functions */
+
+static void cpu5wdt_trigger(struct timer_list *unused)
+{
+	if (verbose > 2)
+		pr_debug("trigger at %i ticks\n", ticks);
+
+	if (cpu5wdt_device.running)
+		ticks--;
+
+	spin_lock(&cpu5wdt_lock);
+	/* keep watchdog alive */
+	outb(1, port + CPU5WDT_TRIGGER_REG);
+
+	/* requeue?? */
+	if (cpu5wdt_device.queue && ticks)
+		mod_timer(&cpu5wdt_device.timer, jiffies + CPU5WDT_INTERVAL);
+	else {
+		/* ticks doesn't matter anyway */
+		complete(&cpu5wdt_device.stop);
+	}
+	spin_unlock(&cpu5wdt_lock);
+
+}
+
+static void cpu5wdt_reset(void)
+{
+	ticks = cpu5wdt_device.default_ticks;
+
+	if (verbose)
+		pr_debug("reset (%i ticks)\n", (int) ticks);
+
+}
+
+static void cpu5wdt_start(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpu5wdt_lock, flags);
+	if (!cpu5wdt_device.queue) {
+		cpu5wdt_device.queue = 1;
+		outb(0, port + CPU5WDT_TIME_A_REG);
+		outb(0, port + CPU5WDT_TIME_B_REG);
+		outb(1, port + CPU5WDT_MODE_REG);
+		outb(0, port + CPU5WDT_RESET_REG);
+		outb(0, port + CPU5WDT_ENABLE_REG);
+		mod_timer(&cpu5wdt_device.timer, jiffies + CPU5WDT_INTERVAL);
+	}
+	/* if process dies, counter is not decremented */
+	cpu5wdt_device.running++;
+	spin_unlock_irqrestore(&cpu5wdt_lock, flags);
+}
+
+static int cpu5wdt_stop(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&cpu5wdt_lock, flags);
+	if (cpu5wdt_device.running)
+		cpu5wdt_device.running = 0;
+	ticks = cpu5wdt_device.default_ticks;
+	spin_unlock_irqrestore(&cpu5wdt_lock, flags);
+	if (verbose)
+		pr_crit("stop not possible\n");
+	return -EIO;
+}
+
+/* filesystem operations */
+
+static int cpu5wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &cpu5wdt_device.inuse))
+		return -EBUSY;
+	return nonseekable_open(inode, file);
+}
+
+static int cpu5wdt_release(struct inode *inode, struct file *file)
+{
+	clear_bit(0, &cpu5wdt_device.inuse);
+	return 0;
+}
+
+static long cpu5wdt_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	unsigned int value;
+	static const struct watchdog_info ident = {
+		.options = WDIOF_CARDRESET,
+		.identity = "CPU5 WDT",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+	case WDIOC_GETSTATUS:
+		value = inb(port + CPU5WDT_STATUS_REG);
+		value = (value >> 2) & 1;
+		return put_user(value, p);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+		if (get_user(value, p))
+			return -EFAULT;
+		if (value & WDIOS_ENABLECARD)
+			cpu5wdt_start();
+		if (value & WDIOS_DISABLECARD)
+			cpu5wdt_stop();
+		break;
+	case WDIOC_KEEPALIVE:
+		cpu5wdt_reset();
+		break;
+	default:
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+static ssize_t cpu5wdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
+{
+	if (!count)
+		return -EIO;
+	cpu5wdt_reset();
+	return count;
+}
+
+static const struct file_operations cpu5wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.unlocked_ioctl	= cpu5wdt_ioctl,
+	.open		= cpu5wdt_open,
+	.write		= cpu5wdt_write,
+	.release	= cpu5wdt_release,
+};
+
+static struct miscdevice cpu5wdt_misc = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &cpu5wdt_fops,
+};
+
+/* init/exit function */
+
+static int cpu5wdt_init(void)
+{
+	unsigned int val;
+	int err;
+
+	if (verbose)
+		pr_debug("port=0x%x, verbose=%i\n", port, verbose);
+
+	init_completion(&cpu5wdt_device.stop);
+	cpu5wdt_device.queue = 0;
+	timer_setup(&cpu5wdt_device.timer, cpu5wdt_trigger, 0);
+	cpu5wdt_device.default_ticks = ticks;
+
+	if (!request_region(port, CPU5WDT_EXTENT, PFX)) {
+		pr_err("request_region failed\n");
+		err = -EBUSY;
+		goto no_port;
+	}
+
+	/* watchdog reboot? */
+	val = inb(port + CPU5WDT_STATUS_REG);
+	val = (val >> 2) & 1;
+	if (!val)
+		pr_info("sorry, was my fault\n");
+
+	err = misc_register(&cpu5wdt_misc);
+	if (err < 0) {
+		pr_err("misc_register failed\n");
+		goto no_misc;
+	}
+
+
+	pr_info("init success\n");
+	return 0;
+
+no_misc:
+	release_region(port, CPU5WDT_EXTENT);
+no_port:
+	return err;
+}
+
+static int cpu5wdt_init_module(void)
+{
+	return cpu5wdt_init();
+}
+
+static void cpu5wdt_exit(void)
+{
+	if (cpu5wdt_device.queue) {
+		cpu5wdt_device.queue = 0;
+		wait_for_completion(&cpu5wdt_device.stop);
+		del_timer(&cpu5wdt_device.timer);
+	}
+
+	misc_deregister(&cpu5wdt_misc);
+
+	release_region(port, CPU5WDT_EXTENT);
+
+}
+
+static void cpu5wdt_exit_module(void)
+{
+	cpu5wdt_exit();
+}
+
+/* module entry points */
+
+module_init(cpu5wdt_init_module);
+module_exit(cpu5wdt_exit_module);
+
+MODULE_AUTHOR("Heiko Ronsdorf <hero@ihg.uni-duisburg.de>");
+MODULE_DESCRIPTION("sma cpu5 watchdog driver");
+MODULE_SUPPORTED_DEVICE("sma cpu5 watchdog");
+MODULE_LICENSE("GPL");
+
+module_param_hw(port, int, ioport, 0);
+MODULE_PARM_DESC(port, "base address of watchdog card, default is 0x91");
+
+module_param(verbose, int, 0);
+MODULE_PARM_DESC(verbose, "be verbose, default is 0 (no)");
+
+module_param(ticks, int, 0);
+MODULE_PARM_DESC(ticks, "count down ticks, default is 10000");
diff --git a/drivers/watchdog/cpwd.c b/drivers/watchdog/cpwd.c
new file mode 100644
index 000000000..aee0b25cf
--- /dev/null
+++ b/drivers/watchdog/cpwd.c
@@ -0,0 +1,677 @@
+/* cpwd.c - driver implementation for hardware watchdog
+ * timers found on Sun Microsystems CP1400 and CP1500 boards.
+ *
+ * This device supports both the generic Linux watchdog
+ * interface and Solaris-compatible ioctls as best it is
+ * able.
+ *
+ * NOTE:	CP1400 systems appear to have a defective intr_mask
+ *			register on the PLD, preventing the disabling of
+ *			timer interrupts.  We use a timer to periodically
+ *			reset 'stopped' watchdogs on affected platforms.
+ *
+ * Copyright (c) 2000 Eric Brower (ebrower@usa.net)
+ * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/major.h>
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/uaccess.h>
+
+#include <asm/irq.h>
+#include <asm/watchdog.h>
+
+#define DRIVER_NAME	"cpwd"
+
+#define WD_OBPNAME	"watchdog"
+#define WD_BADMODEL	"SUNW,501-5336"
+#define WD_BTIMEOUT	(jiffies + (HZ * 1000))
+#define WD_BLIMIT	0xFFFF
+
+#define WD0_MINOR	212
+#define WD1_MINOR	213
+#define WD2_MINOR	214
+
+/* Internal driver definitions.  */
+#define WD0_ID			0
+#define WD1_ID			1
+#define WD2_ID			2
+#define WD_NUMDEVS		3
+
+#define WD_INTR_OFF		0
+#define WD_INTR_ON		1
+
+#define WD_STAT_INIT	0x01	/* Watchdog timer is initialized	*/
+#define WD_STAT_BSTOP	0x02	/* Watchdog timer is brokenstopped	*/
+#define WD_STAT_SVCD	0x04	/* Watchdog interrupt occurred		*/
+
+/* Register value definitions
+ */
+#define WD0_INTR_MASK	0x01	/* Watchdog device interrupt masks	*/
+#define WD1_INTR_MASK	0x02
+#define WD2_INTR_MASK	0x04
+
+#define WD_S_RUNNING	0x01	/* Watchdog device status running	*/
+#define WD_S_EXPIRED	0x02	/* Watchdog device status expired	*/
+
+struct cpwd {
+	void __iomem	*regs;
+	spinlock_t	lock;
+
+	unsigned int	irq;
+
+	unsigned long	timeout;
+	bool		enabled;
+	bool		reboot;
+	bool		broken;
+	bool		initialized;
+
+	struct {
+		struct miscdevice	misc;
+		void __iomem		*regs;
+		u8			intr_mask;
+		u8			runstatus;
+		u16			timeout;
+	} devs[WD_NUMDEVS];
+};
+
+static DEFINE_MUTEX(cpwd_mutex);
+static struct cpwd *cpwd_device;
+
+/* Sun uses Altera PLD EPF8820ATC144-4
+ * providing three hardware watchdogs:
+ *
+ * 1) RIC - sends an interrupt when triggered
+ * 2) XIR - asserts XIR_B_RESET when triggered, resets CPU
+ * 3) POR - asserts POR_B_RESET when triggered, resets CPU, backplane, board
+ *
+ *** Timer register block definition (struct wd_timer_regblk)
+ *
+ * dcntr and limit registers (halfword access):
+ * -------------------
+ * | 15 | ...| 1 | 0 |
+ * -------------------
+ * |-  counter val  -|
+ * -------------------
+ * dcntr -	Current 16-bit downcounter value.
+ *			When downcounter reaches '0' watchdog expires.
+ *			Reading this register resets downcounter with
+ *			'limit' value.
+ * limit -	16-bit countdown value in 1/10th second increments.
+ *			Writing this register begins countdown with input value.
+ *			Reading from this register does not affect counter.
+ * NOTES:	After watchdog reset, dcntr and limit contain '1'
+ *
+ * status register (byte access):
+ * ---------------------------
+ * | 7 | ... | 2 |  1  |  0  |
+ * --------------+------------
+ * |-   UNUSED  -| EXP | RUN |
+ * ---------------------------
+ * status-	Bit 0 - Watchdog is running
+ *			Bit 1 - Watchdog has expired
+ *
+ *** PLD register block definition (struct wd_pld_regblk)
+ *
+ * intr_mask register (byte access):
+ * ---------------------------------
+ * | 7 | ... | 3 |  2  |  1  |  0  |
+ * +-------------+------------------
+ * |-   UNUSED  -| WD3 | WD2 | WD1 |
+ * ---------------------------------
+ * WD3 -  1 == Interrupt disabled for watchdog 3
+ * WD2 -  1 == Interrupt disabled for watchdog 2
+ * WD1 -  1 == Interrupt disabled for watchdog 1
+ *
+ * pld_status register (byte access):
+ * UNKNOWN, MAGICAL MYSTERY REGISTER
+ *
+ */
+#define WD_TIMER_REGSZ	16
+#define WD0_OFF		0
+#define WD1_OFF		(WD_TIMER_REGSZ * 1)
+#define WD2_OFF		(WD_TIMER_REGSZ * 2)
+#define PLD_OFF		(WD_TIMER_REGSZ * 3)
+
+#define WD_DCNTR	0x00
+#define WD_LIMIT	0x04
+#define WD_STATUS	0x08
+
+#define PLD_IMASK	(PLD_OFF + 0x00)
+#define PLD_STATUS	(PLD_OFF + 0x04)
+
+static struct timer_list cpwd_timer;
+
+static int wd0_timeout;
+static int wd1_timeout;
+static int wd2_timeout;
+
+module_param(wd0_timeout, int, 0);
+MODULE_PARM_DESC(wd0_timeout, "Default watchdog0 timeout in 1/10secs");
+module_param(wd1_timeout, int, 0);
+MODULE_PARM_DESC(wd1_timeout, "Default watchdog1 timeout in 1/10secs");
+module_param(wd2_timeout, int, 0);
+MODULE_PARM_DESC(wd2_timeout, "Default watchdog2 timeout in 1/10secs");
+
+MODULE_AUTHOR("Eric Brower <ebrower@usa.net>");
+MODULE_DESCRIPTION("Hardware watchdog driver for Sun Microsystems CP1400/1500");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("watchdog");
+
+static void cpwd_writew(u16 val, void __iomem *addr)
+{
+	writew(cpu_to_le16(val), addr);
+}
+static u16 cpwd_readw(void __iomem *addr)
+{
+	u16 val = readw(addr);
+
+	return le16_to_cpu(val);
+}
+
+static void cpwd_writeb(u8 val, void __iomem *addr)
+{
+	writeb(val, addr);
+}
+
+static u8 cpwd_readb(void __iomem *addr)
+{
+	return readb(addr);
+}
+
+/* Enable or disable watchdog interrupts
+ * Because of the CP1400 defect this should only be
+ * called during initialzation or by wd_[start|stop]timer()
+ *
+ * index	- sub-device index, or -1 for 'all'
+ * enable	- non-zero to enable interrupts, zero to disable
+ */
+static void cpwd_toggleintr(struct cpwd *p, int index, int enable)
+{
+	unsigned char curregs = cpwd_readb(p->regs + PLD_IMASK);
+	unsigned char setregs =
+		(index == -1) ?
+		(WD0_INTR_MASK | WD1_INTR_MASK | WD2_INTR_MASK) :
+		(p->devs[index].intr_mask);
+
+	if (enable == WD_INTR_ON)
+		curregs &= ~setregs;
+	else
+		curregs |= setregs;
+
+	cpwd_writeb(curregs, p->regs + PLD_IMASK);
+}
+
+/* Restarts timer with maximum limit value and
+ * does not unset 'brokenstop' value.
+ */
+static void cpwd_resetbrokentimer(struct cpwd *p, int index)
+{
+	cpwd_toggleintr(p, index, WD_INTR_ON);
+	cpwd_writew(WD_BLIMIT, p->devs[index].regs + WD_LIMIT);
+}
+
+/* Timer method called to reset stopped watchdogs--
+ * because of the PLD bug on CP1400, we cannot mask
+ * interrupts within the PLD so me must continually
+ * reset the timers ad infinitum.
+ */
+static void cpwd_brokentimer(struct timer_list *unused)
+{
+	struct cpwd *p = cpwd_device;
+	int id, tripped = 0;
+
+	/* kill a running timer instance, in case we
+	 * were called directly instead of by kernel timer
+	 */
+	if (timer_pending(&cpwd_timer))
+		del_timer(&cpwd_timer);
+
+	for (id = 0; id < WD_NUMDEVS; id++) {
+		if (p->devs[id].runstatus & WD_STAT_BSTOP) {
+			++tripped;
+			cpwd_resetbrokentimer(p, id);
+		}
+	}
+
+	if (tripped) {
+		/* there is at least one timer brokenstopped-- reschedule */
+		cpwd_timer.expires = WD_BTIMEOUT;
+		add_timer(&cpwd_timer);
+	}
+}
+
+/* Reset countdown timer with 'limit' value and continue countdown.
+ * This will not start a stopped timer.
+ */
+static void cpwd_pingtimer(struct cpwd *p, int index)
+{
+	if (cpwd_readb(p->devs[index].regs + WD_STATUS) & WD_S_RUNNING)
+		cpwd_readw(p->devs[index].regs + WD_DCNTR);
+}
+
+/* Stop a running watchdog timer-- the timer actually keeps
+ * running, but the interrupt is masked so that no action is
+ * taken upon expiration.
+ */
+static void cpwd_stoptimer(struct cpwd *p, int index)
+{
+	if (cpwd_readb(p->devs[index].regs + WD_STATUS) & WD_S_RUNNING) {
+		cpwd_toggleintr(p, index, WD_INTR_OFF);
+
+		if (p->broken) {
+			p->devs[index].runstatus |= WD_STAT_BSTOP;
+			cpwd_brokentimer(NULL);
+		}
+	}
+}
+
+/* Start a watchdog timer with the specified limit value
+ * If the watchdog is running, it will be restarted with
+ * the provided limit value.
+ *
+ * This function will enable interrupts on the specified
+ * watchdog.
+ */
+static void cpwd_starttimer(struct cpwd *p, int index)
+{
+	if (p->broken)
+		p->devs[index].runstatus &= ~WD_STAT_BSTOP;
+
+	p->devs[index].runstatus &= ~WD_STAT_SVCD;
+
+	cpwd_writew(p->devs[index].timeout, p->devs[index].regs + WD_LIMIT);
+	cpwd_toggleintr(p, index, WD_INTR_ON);
+}
+
+static int cpwd_getstatus(struct cpwd *p, int index)
+{
+	unsigned char stat = cpwd_readb(p->devs[index].regs + WD_STATUS);
+	unsigned char intr = cpwd_readb(p->devs[index].regs + PLD_IMASK);
+	unsigned char ret  = WD_STOPPED;
+
+	/* determine STOPPED */
+	if (!stat)
+		return ret;
+
+	/* determine EXPIRED vs FREERUN vs RUNNING */
+	else if (WD_S_EXPIRED & stat) {
+		ret = WD_EXPIRED;
+	} else if (WD_S_RUNNING & stat) {
+		if (intr & p->devs[index].intr_mask) {
+			ret = WD_FREERUN;
+		} else {
+			/* Fudge WD_EXPIRED status for defective CP1400--
+			 * IF timer is running
+			 *	AND brokenstop is set
+			 *	AND an interrupt has been serviced
+			 * we are WD_EXPIRED.
+			 *
+			 * IF timer is running
+			 *	AND brokenstop is set
+			 *	AND no interrupt has been serviced
+			 * we are WD_FREERUN.
+			 */
+			if (p->broken &&
+			    (p->devs[index].runstatus & WD_STAT_BSTOP)) {
+				if (p->devs[index].runstatus & WD_STAT_SVCD) {
+					ret = WD_EXPIRED;
+				} else {
+					/* we could as well pretend
+					 * we are expired */
+					ret = WD_FREERUN;
+				}
+			} else {
+				ret = WD_RUNNING;
+			}
+		}
+	}
+
+	/* determine SERVICED */
+	if (p->devs[index].runstatus & WD_STAT_SVCD)
+		ret |= WD_SERVICED;
+
+	return ret;
+}
+
+static irqreturn_t cpwd_interrupt(int irq, void *dev_id)
+{
+	struct cpwd *p = dev_id;
+
+	/* Only WD0 will interrupt-- others are NMI and we won't
+	 * see them here....
+	 */
+	spin_lock_irq(&p->lock);
+
+	cpwd_stoptimer(p, WD0_ID);
+	p->devs[WD0_ID].runstatus |=  WD_STAT_SVCD;
+
+	spin_unlock_irq(&p->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int cpwd_open(struct inode *inode, struct file *f)
+{
+	struct cpwd *p = cpwd_device;
+
+	mutex_lock(&cpwd_mutex);
+	switch (iminor(inode)) {
+	case WD0_MINOR:
+	case WD1_MINOR:
+	case WD2_MINOR:
+		break;
+
+	default:
+		mutex_unlock(&cpwd_mutex);
+		return -ENODEV;
+	}
+
+	/* Register IRQ on first open of device */
+	if (!p->initialized) {
+		if (request_irq(p->irq, &cpwd_interrupt,
+				IRQF_SHARED, DRIVER_NAME, p)) {
+			pr_err("Cannot register IRQ %d\n", p->irq);
+			mutex_unlock(&cpwd_mutex);
+			return -EBUSY;
+		}
+		p->initialized = true;
+	}
+
+	mutex_unlock(&cpwd_mutex);
+
+	return nonseekable_open(inode, f);
+}
+
+static int cpwd_release(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+static long cpwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	static const struct watchdog_info info = {
+		.options		= WDIOF_SETTIMEOUT,
+		.firmware_version	= 1,
+		.identity		= DRIVER_NAME,
+	};
+	void __user *argp = (void __user *)arg;
+	struct inode *inode = file_inode(file);
+	int index = iminor(inode) - WD0_MINOR;
+	struct cpwd *p = cpwd_device;
+	int setopt = 0;
+
+	switch (cmd) {
+	/* Generic Linux IOCTLs */
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &info, sizeof(struct watchdog_info)))
+			return -EFAULT;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		if (put_user(0, (int __user *)argp))
+			return -EFAULT;
+		break;
+
+	case WDIOC_KEEPALIVE:
+		cpwd_pingtimer(p, index);
+		break;
+
+	case WDIOC_SETOPTIONS:
+		if (copy_from_user(&setopt, argp, sizeof(unsigned int)))
+			return -EFAULT;
+
+		if (setopt & WDIOS_DISABLECARD) {
+			if (p->enabled)
+				return -EINVAL;
+			cpwd_stoptimer(p, index);
+		} else if (setopt & WDIOS_ENABLECARD) {
+			cpwd_starttimer(p, index);
+		} else {
+			return -EINVAL;
+		}
+		break;
+
+	/* Solaris-compatible IOCTLs */
+	case WIOCGSTAT:
+		setopt = cpwd_getstatus(p, index);
+		if (copy_to_user(argp, &setopt, sizeof(unsigned int)))
+			return -EFAULT;
+		break;
+
+	case WIOCSTART:
+		cpwd_starttimer(p, index);
+		break;
+
+	case WIOCSTOP:
+		if (p->enabled)
+			return -EINVAL;
+
+		cpwd_stoptimer(p, index);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static long cpwd_compat_ioctl(struct file *file, unsigned int cmd,
+			      unsigned long arg)
+{
+	int rval = -ENOIOCTLCMD;
+
+	switch (cmd) {
+	/* solaris ioctls are specific to this driver */
+	case WIOCSTART:
+	case WIOCSTOP:
+	case WIOCGSTAT:
+		mutex_lock(&cpwd_mutex);
+		rval = cpwd_ioctl(file, cmd, arg);
+		mutex_unlock(&cpwd_mutex);
+		break;
+
+	/* everything else is handled by the generic compat layer */
+	default:
+		break;
+	}
+
+	return rval;
+}
+
+static ssize_t cpwd_write(struct file *file, const char __user *buf,
+			  size_t count, loff_t *ppos)
+{
+	struct inode *inode = file_inode(file);
+	struct cpwd *p = cpwd_device;
+	int index = iminor(inode);
+
+	if (count) {
+		cpwd_pingtimer(p, index);
+		return 1;
+	}
+
+	return 0;
+}
+
+static ssize_t cpwd_read(struct file *file, char __user *buffer,
+			 size_t count, loff_t *ppos)
+{
+	return -EINVAL;
+}
+
+static const struct file_operations cpwd_fops = {
+	.owner =		THIS_MODULE,
+	.unlocked_ioctl =	cpwd_ioctl,
+	.compat_ioctl =		cpwd_compat_ioctl,
+	.open =			cpwd_open,
+	.write =		cpwd_write,
+	.read =			cpwd_read,
+	.release =		cpwd_release,
+	.llseek =		no_llseek,
+};
+
+static int cpwd_probe(struct platform_device *op)
+{
+	struct device_node *options;
+	const char *str_prop;
+	const void *prop_val;
+	int i, err = -EINVAL;
+	struct cpwd *p;
+
+	if (cpwd_device)
+		return -EINVAL;
+
+	p = devm_kzalloc(&op->dev, sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	p->irq = op->archdata.irqs[0];
+
+	spin_lock_init(&p->lock);
+
+	p->regs = of_ioremap(&op->resource[0], 0,
+			     4 * WD_TIMER_REGSZ, DRIVER_NAME);
+	if (!p->regs) {
+		pr_err("Unable to map registers\n");
+		return -ENOMEM;
+	}
+
+	options = of_find_node_by_path("/options");
+	if (!options) {
+		err = -ENODEV;
+		pr_err("Unable to find /options node\n");
+		goto out_iounmap;
+	}
+
+	prop_val = of_get_property(options, "watchdog-enable?", NULL);
+	p->enabled = (prop_val ? true : false);
+
+	prop_val = of_get_property(options, "watchdog-reboot?", NULL);
+	p->reboot = (prop_val ? true : false);
+
+	str_prop = of_get_property(options, "watchdog-timeout", NULL);
+	if (str_prop)
+		p->timeout = simple_strtoul(str_prop, NULL, 10);
+
+	/* CP1400s seem to have broken PLD implementations-- the
+	 * interrupt_mask register cannot be written, so no timer
+	 * interrupts can be masked within the PLD.
+	 */
+	str_prop = of_get_property(op->dev.of_node, "model", NULL);
+	p->broken = (str_prop && !strcmp(str_prop, WD_BADMODEL));
+
+	if (!p->enabled)
+		cpwd_toggleintr(p, -1, WD_INTR_OFF);
+
+	for (i = 0; i < WD_NUMDEVS; i++) {
+		static const char *cpwd_names[] = { "RIC", "XIR", "POR" };
+		static int *parms[] = { &wd0_timeout,
+					&wd1_timeout,
+					&wd2_timeout };
+		struct miscdevice *mp = &p->devs[i].misc;
+
+		mp->minor = WD0_MINOR + i;
+		mp->name = cpwd_names[i];
+		mp->fops = &cpwd_fops;
+
+		p->devs[i].regs = p->regs + (i * WD_TIMER_REGSZ);
+		p->devs[i].intr_mask = (WD0_INTR_MASK << i);
+		p->devs[i].runstatus &= ~WD_STAT_BSTOP;
+		p->devs[i].runstatus |= WD_STAT_INIT;
+		p->devs[i].timeout = p->timeout;
+		if (*parms[i])
+			p->devs[i].timeout = *parms[i];
+
+		err = misc_register(&p->devs[i].misc);
+		if (err) {
+			pr_err("Could not register misc device for dev %d\n",
+			       i);
+			goto out_unregister;
+		}
+	}
+
+	if (p->broken) {
+		timer_setup(&cpwd_timer, cpwd_brokentimer, 0);
+		cpwd_timer.expires	= WD_BTIMEOUT;
+
+		pr_info("PLD defect workaround enabled for model %s\n",
+			WD_BADMODEL);
+	}
+
+	platform_set_drvdata(op, p);
+	cpwd_device = p;
+	return 0;
+
+out_unregister:
+	for (i--; i >= 0; i--)
+		misc_deregister(&p->devs[i].misc);
+
+out_iounmap:
+	of_iounmap(&op->resource[0], p->regs, 4 * WD_TIMER_REGSZ);
+
+	return err;
+}
+
+static int cpwd_remove(struct platform_device *op)
+{
+	struct cpwd *p = platform_get_drvdata(op);
+	int i;
+
+	for (i = 0; i < WD_NUMDEVS; i++) {
+		misc_deregister(&p->devs[i].misc);
+
+		if (!p->enabled) {
+			cpwd_stoptimer(p, i);
+			if (p->devs[i].runstatus & WD_STAT_BSTOP)
+				cpwd_resetbrokentimer(p, i);
+		}
+	}
+
+	if (p->broken)
+		del_timer_sync(&cpwd_timer);
+
+	if (p->initialized)
+		free_irq(p->irq, p);
+
+	of_iounmap(&op->resource[0], p->regs, 4 * WD_TIMER_REGSZ);
+
+	cpwd_device = NULL;
+
+	return 0;
+}
+
+static const struct of_device_id cpwd_match[] = {
+	{
+		.name = "watchdog",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, cpwd_match);
+
+static struct platform_driver cpwd_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = cpwd_match,
+	},
+	.probe		= cpwd_probe,
+	.remove		= cpwd_remove,
+};
+
+module_platform_driver(cpwd_driver);
diff --git a/drivers/watchdog/da9052_wdt.c b/drivers/watchdog/da9052_wdt.c
new file mode 100644
index 000000000..e263bad99
--- /dev/null
+++ b/drivers/watchdog/da9052_wdt.c
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * System monitoring driver for DA9052 PMICs.
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: Anthony Olech <Anthony.Olech@diasemi.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+#include <linux/time.h>
+#include <linux/watchdog.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+
+#include <linux/mfd/da9052/reg.h>
+#include <linux/mfd/da9052/da9052.h>
+
+#define DA9052_DEF_TIMEOUT	4
+#define DA9052_TWDMIN		256
+
+struct da9052_wdt_data {
+	struct watchdog_device wdt;
+	struct da9052 *da9052;
+	unsigned long jpast;
+};
+
+static const struct {
+	u8 reg_val;
+	int time;  /* Seconds */
+} da9052_wdt_maps[] = {
+	{ 1, 2 },
+	{ 2, 4 },
+	{ 3, 8 },
+	{ 4, 16 },
+	{ 5, 32 },
+	{ 5, 33 },  /* Actual time  32.768s so included both 32s and 33s */
+	{ 6, 65 },
+	{ 6, 66 },  /* Actual time 65.536s so include both, 65s and 66s */
+	{ 7, 131 },
+};
+
+
+static int da9052_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				  unsigned int timeout)
+{
+	struct da9052_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
+	struct da9052 *da9052 = driver_data->da9052;
+	int ret, i;
+
+	/*
+	 * Disable the Watchdog timer before setting
+	 * new time out.
+	 */
+	ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
+				DA9052_CONTROLD_TWDSCALE, 0);
+	if (ret < 0) {
+		dev_err(da9052->dev, "Failed to disable watchdog bit, %d\n",
+			ret);
+		return ret;
+	}
+	if (timeout) {
+		/*
+		 * To change the timeout, da9052 needs to
+		 * be disabled for at least 150 us.
+		 */
+		udelay(150);
+
+		/* Set the desired timeout */
+		for (i = 0; i < ARRAY_SIZE(da9052_wdt_maps); i++)
+			if (da9052_wdt_maps[i].time == timeout)
+				break;
+
+		if (i == ARRAY_SIZE(da9052_wdt_maps))
+			ret = -EINVAL;
+		else
+			ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
+						DA9052_CONTROLD_TWDSCALE,
+						da9052_wdt_maps[i].reg_val);
+		if (ret < 0) {
+			dev_err(da9052->dev,
+				"Failed to update timescale bit, %d\n", ret);
+			return ret;
+		}
+
+		wdt_dev->timeout = timeout;
+		driver_data->jpast = jiffies;
+	}
+
+	return 0;
+}
+
+static int da9052_wdt_start(struct watchdog_device *wdt_dev)
+{
+	return da9052_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
+}
+
+static int da9052_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	return da9052_wdt_set_timeout(wdt_dev, 0);
+}
+
+static int da9052_wdt_ping(struct watchdog_device *wdt_dev)
+{
+	struct da9052_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
+	struct da9052 *da9052 = driver_data->da9052;
+	unsigned long msec, jnow = jiffies;
+	int ret;
+
+	/*
+	 * We have a minimum time for watchdog window called TWDMIN. A write
+	 * to the watchdog before this elapsed time should cause an error.
+	 */
+	msec = (jnow - driver_data->jpast) * 1000/HZ;
+	if (msec < DA9052_TWDMIN)
+		mdelay(msec);
+
+	/* Reset the watchdog timer */
+	ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
+				DA9052_CONTROLD_WATCHDOG, 1 << 7);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * FIXME: Reset the watchdog core, in general PMIC
+	 * is supposed to do this
+	 */
+	return da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
+				 DA9052_CONTROLD_WATCHDOG, 0 << 7);
+}
+
+static const struct watchdog_info da9052_wdt_info = {
+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.identity	= "DA9052 Watchdog",
+};
+
+static const struct watchdog_ops da9052_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = da9052_wdt_start,
+	.stop = da9052_wdt_stop,
+	.ping = da9052_wdt_ping,
+	.set_timeout = da9052_wdt_set_timeout,
+};
+
+
+static int da9052_wdt_probe(struct platform_device *pdev)
+{
+	struct da9052 *da9052 = dev_get_drvdata(pdev->dev.parent);
+	struct da9052_wdt_data *driver_data;
+	struct watchdog_device *da9052_wdt;
+	int ret;
+
+	driver_data = devm_kzalloc(&pdev->dev, sizeof(*driver_data),
+				   GFP_KERNEL);
+	if (!driver_data)
+		return -ENOMEM;
+	driver_data->da9052 = da9052;
+
+	da9052_wdt = &driver_data->wdt;
+
+	da9052_wdt->timeout = DA9052_DEF_TIMEOUT;
+	da9052_wdt->info = &da9052_wdt_info;
+	da9052_wdt->ops = &da9052_wdt_ops;
+	da9052_wdt->parent = &pdev->dev;
+	watchdog_set_drvdata(da9052_wdt, driver_data);
+
+	ret = da9052_reg_update(da9052, DA9052_CONTROL_D_REG,
+				DA9052_CONTROLD_TWDSCALE, 0);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to disable watchdog bits, %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = devm_watchdog_register_device(&pdev->dev, &driver_data->wdt);
+	if (ret != 0) {
+		dev_err(da9052->dev, "watchdog_register_device() failed: %d\n",
+			ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static struct platform_driver da9052_wdt_driver = {
+	.probe = da9052_wdt_probe,
+	.driver = {
+		.name	= "da9052-watchdog",
+	},
+};
+
+module_platform_driver(da9052_wdt_driver);
+
+MODULE_AUTHOR("Anthony Olech <Anthony.Olech@diasemi.com>");
+MODULE_DESCRIPTION("DA9052 SM Device Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9052-watchdog");
diff --git a/drivers/watchdog/da9055_wdt.c b/drivers/watchdog/da9055_wdt.c
new file mode 100644
index 000000000..26a5b2984
--- /dev/null
+++ b/drivers/watchdog/da9055_wdt.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * System monitoring driver for DA9055 PMICs.
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/delay.h>
+
+#include <linux/mfd/da9055/core.h>
+#include <linux/mfd/da9055/reg.h>
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		 "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+#define DA9055_DEF_TIMEOUT	4
+#define DA9055_TWDMIN		256
+
+struct da9055_wdt_data {
+	struct watchdog_device wdt;
+	struct da9055 *da9055;
+};
+
+static const struct {
+	u8 reg_val;
+	int user_time;  /* In seconds */
+} da9055_wdt_maps[] = {
+	{ 0, 0 },
+	{ 1, 2 },
+	{ 2, 4 },
+	{ 3, 8 },
+	{ 4, 16 },
+	{ 5, 32 },
+	{ 5, 33 },  /* Actual time  32.768s so included both 32s and 33s */
+	{ 6, 65 },
+	{ 6, 66 },  /* Actual time 65.536s so include both, 65s and 66s */
+	{ 7, 131 },
+};
+
+static int da9055_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				  unsigned int timeout)
+{
+	struct da9055_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
+	struct da9055 *da9055 = driver_data->da9055;
+	int ret, i;
+
+	for (i = 0; i < ARRAY_SIZE(da9055_wdt_maps); i++)
+		if (da9055_wdt_maps[i].user_time == timeout)
+			break;
+
+	if (i == ARRAY_SIZE(da9055_wdt_maps))
+		ret = -EINVAL;
+	else
+		ret = da9055_reg_update(da9055, DA9055_REG_CONTROL_B,
+					DA9055_TWDSCALE_MASK,
+					da9055_wdt_maps[i].reg_val <<
+					DA9055_TWDSCALE_SHIFT);
+	if (ret < 0) {
+		dev_err(da9055->dev,
+			"Failed to update timescale bit, %d\n", ret);
+		return ret;
+	}
+
+	wdt_dev->timeout = timeout;
+
+	return 0;
+}
+
+static int da9055_wdt_ping(struct watchdog_device *wdt_dev)
+{
+	struct da9055_wdt_data *driver_data = watchdog_get_drvdata(wdt_dev);
+	struct da9055 *da9055 = driver_data->da9055;
+
+	/*
+	 * We have a minimum time for watchdog window called TWDMIN. A write
+	 * to the watchdog before this elapsed time will cause an error.
+	 */
+	mdelay(DA9055_TWDMIN);
+
+	/* Reset the watchdog timer */
+	return da9055_reg_update(da9055, DA9055_REG_CONTROL_E,
+				 DA9055_WATCHDOG_MASK, 1);
+}
+
+static int da9055_wdt_start(struct watchdog_device *wdt_dev)
+{
+	return da9055_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
+}
+
+static int da9055_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	return da9055_wdt_set_timeout(wdt_dev, 0);
+}
+
+static const struct watchdog_info da9055_wdt_info = {
+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.identity	= "DA9055 Watchdog",
+};
+
+static const struct watchdog_ops da9055_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = da9055_wdt_start,
+	.stop = da9055_wdt_stop,
+	.ping = da9055_wdt_ping,
+	.set_timeout = da9055_wdt_set_timeout,
+};
+
+static int da9055_wdt_probe(struct platform_device *pdev)
+{
+	struct da9055 *da9055 = dev_get_drvdata(pdev->dev.parent);
+	struct da9055_wdt_data *driver_data;
+	struct watchdog_device *da9055_wdt;
+	int ret;
+
+	driver_data = devm_kzalloc(&pdev->dev, sizeof(*driver_data),
+				   GFP_KERNEL);
+	if (!driver_data)
+		return -ENOMEM;
+
+	driver_data->da9055 = da9055;
+
+	da9055_wdt = &driver_data->wdt;
+
+	da9055_wdt->timeout = DA9055_DEF_TIMEOUT;
+	da9055_wdt->info = &da9055_wdt_info;
+	da9055_wdt->ops = &da9055_wdt_ops;
+	da9055_wdt->parent = &pdev->dev;
+	watchdog_set_nowayout(da9055_wdt, nowayout);
+	watchdog_set_drvdata(da9055_wdt, driver_data);
+
+	ret = da9055_wdt_stop(da9055_wdt);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to stop watchdog, %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_watchdog_register_device(&pdev->dev, &driver_data->wdt);
+	if (ret != 0)
+		dev_err(da9055->dev, "watchdog_register_device() failed: %d\n",
+			ret);
+
+	return ret;
+}
+
+static struct platform_driver da9055_wdt_driver = {
+	.probe = da9055_wdt_probe,
+	.driver = {
+		.name	= "da9055-watchdog",
+	},
+};
+
+module_platform_driver(da9055_wdt_driver);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("DA9055 watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9055-watchdog");
diff --git a/drivers/watchdog/da9062_wdt.c b/drivers/watchdog/da9062_wdt.c
new file mode 100644
index 000000000..132d45d00
--- /dev/null
+++ b/drivers/watchdog/da9062_wdt.c
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Watchdog device driver for DA9062 and DA9061 PMICs
+ * Copyright (C) 2015  Dialog Semiconductor Ltd.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/mfd/da9062/registers.h>
+#include <linux/mfd/da9062/core.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+
+static const unsigned int wdt_timeout[] = { 0, 2, 4, 8, 16, 32, 65, 131 };
+#define DA9062_TWDSCALE_DISABLE		0
+#define DA9062_TWDSCALE_MIN		1
+#define DA9062_TWDSCALE_MAX		(ARRAY_SIZE(wdt_timeout) - 1)
+#define DA9062_WDT_MIN_TIMEOUT		wdt_timeout[DA9062_TWDSCALE_MIN]
+#define DA9062_WDT_MAX_TIMEOUT		wdt_timeout[DA9062_TWDSCALE_MAX]
+#define DA9062_WDG_DEFAULT_TIMEOUT	wdt_timeout[DA9062_TWDSCALE_MAX-1]
+#define DA9062_RESET_PROTECTION_MS	300
+
+struct da9062_watchdog {
+	struct da9062 *hw;
+	struct watchdog_device wdtdev;
+};
+
+static unsigned int da9062_wdt_timeout_to_sel(unsigned int secs)
+{
+	unsigned int i;
+
+	for (i = DA9062_TWDSCALE_MIN; i <= DA9062_TWDSCALE_MAX; i++) {
+		if (wdt_timeout[i] >= secs)
+			return i;
+	}
+
+	return DA9062_TWDSCALE_MAX;
+}
+
+static int da9062_reset_watchdog_timer(struct da9062_watchdog *wdt)
+{
+	int ret;
+
+	ret = regmap_update_bits(wdt->hw->regmap,
+			   DA9062AA_CONTROL_F,
+			   DA9062AA_WATCHDOG_MASK,
+			   DA9062AA_WATCHDOG_MASK);
+
+	return ret;
+}
+
+static int da9062_wdt_update_timeout_register(struct da9062_watchdog *wdt,
+					      unsigned int regval)
+{
+	struct da9062 *chip = wdt->hw;
+
+	regmap_update_bits(chip->regmap,
+				  DA9062AA_CONTROL_D,
+				  DA9062AA_TWDSCALE_MASK,
+				  DA9062_TWDSCALE_DISABLE);
+
+	usleep_range(150, 300);
+
+	return regmap_update_bits(chip->regmap,
+				  DA9062AA_CONTROL_D,
+				  DA9062AA_TWDSCALE_MASK,
+				  regval);
+}
+
+static int da9062_wdt_start(struct watchdog_device *wdd)
+{
+	struct da9062_watchdog *wdt = watchdog_get_drvdata(wdd);
+	unsigned int selector;
+	int ret;
+
+	selector = da9062_wdt_timeout_to_sel(wdt->wdtdev.timeout);
+	ret = da9062_wdt_update_timeout_register(wdt, selector);
+	if (ret)
+		dev_err(wdt->hw->dev, "Watchdog failed to start (err = %d)\n",
+			ret);
+
+	return ret;
+}
+
+static int da9062_wdt_stop(struct watchdog_device *wdd)
+{
+	struct da9062_watchdog *wdt = watchdog_get_drvdata(wdd);
+	int ret;
+
+	ret = regmap_update_bits(wdt->hw->regmap,
+				 DA9062AA_CONTROL_D,
+				 DA9062AA_TWDSCALE_MASK,
+				 DA9062_TWDSCALE_DISABLE);
+	if (ret)
+		dev_err(wdt->hw->dev, "Watchdog failed to stop (err = %d)\n",
+			ret);
+
+	return ret;
+}
+
+static int da9062_wdt_ping(struct watchdog_device *wdd)
+{
+	struct da9062_watchdog *wdt = watchdog_get_drvdata(wdd);
+	int ret;
+
+	ret = da9062_reset_watchdog_timer(wdt);
+	if (ret)
+		dev_err(wdt->hw->dev, "Failed to ping the watchdog (err = %d)\n",
+			ret);
+
+	return ret;
+}
+
+static int da9062_wdt_set_timeout(struct watchdog_device *wdd,
+				  unsigned int timeout)
+{
+	struct da9062_watchdog *wdt = watchdog_get_drvdata(wdd);
+	unsigned int selector;
+	int ret;
+
+	selector = da9062_wdt_timeout_to_sel(timeout);
+	ret = da9062_wdt_update_timeout_register(wdt, selector);
+	if (ret)
+		dev_err(wdt->hw->dev, "Failed to set watchdog timeout (err = %d)\n",
+			ret);
+	else
+		wdd->timeout = wdt_timeout[selector];
+
+	return ret;
+}
+
+static int da9062_wdt_restart(struct watchdog_device *wdd, unsigned long action,
+			      void *data)
+{
+	struct da9062_watchdog *wdt = watchdog_get_drvdata(wdd);
+	int ret;
+
+	ret = regmap_write(wdt->hw->regmap,
+			   DA9062AA_CONTROL_F,
+			   DA9062AA_SHUTDOWN_MASK);
+	if (ret)
+		dev_alert(wdt->hw->dev, "Failed to shutdown (err = %d)\n",
+			  ret);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	return ret;
+}
+
+static const struct watchdog_info da9062_watchdog_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.identity = "DA9062 WDT",
+};
+
+static const struct watchdog_ops da9062_watchdog_ops = {
+	.owner = THIS_MODULE,
+	.start = da9062_wdt_start,
+	.stop = da9062_wdt_stop,
+	.ping = da9062_wdt_ping,
+	.set_timeout = da9062_wdt_set_timeout,
+	.restart = da9062_wdt_restart,
+};
+
+static const struct of_device_id da9062_compatible_id_table[] = {
+	{ .compatible = "dlg,da9062-watchdog", },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, da9062_compatible_id_table);
+
+static int da9062_wdt_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct da9062 *chip;
+	struct da9062_watchdog *wdt;
+
+	chip = dev_get_drvdata(pdev->dev.parent);
+	if (!chip)
+		return -EINVAL;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdt->hw = chip;
+
+	wdt->wdtdev.info = &da9062_watchdog_info;
+	wdt->wdtdev.ops = &da9062_watchdog_ops;
+	wdt->wdtdev.min_timeout = DA9062_WDT_MIN_TIMEOUT;
+	wdt->wdtdev.max_timeout = DA9062_WDT_MAX_TIMEOUT;
+	wdt->wdtdev.min_hw_heartbeat_ms = DA9062_RESET_PROTECTION_MS;
+	wdt->wdtdev.timeout = DA9062_WDG_DEFAULT_TIMEOUT;
+	wdt->wdtdev.status = WATCHDOG_NOWAYOUT_INIT_STATUS;
+	wdt->wdtdev.parent = &pdev->dev;
+
+	watchdog_set_restart_priority(&wdt->wdtdev, 128);
+
+	watchdog_set_drvdata(&wdt->wdtdev, wdt);
+
+	ret = devm_watchdog_register_device(&pdev->dev, &wdt->wdtdev);
+	if (ret < 0) {
+		dev_err(wdt->hw->dev,
+			"watchdog registration failed (%d)\n", ret);
+		return ret;
+	}
+
+	return da9062_wdt_ping(&wdt->wdtdev);
+}
+
+static struct platform_driver da9062_wdt_driver = {
+	.probe = da9062_wdt_probe,
+	.driver = {
+		.name = "da9062-watchdog",
+		.of_match_table = da9062_compatible_id_table,
+	},
+};
+module_platform_driver(da9062_wdt_driver);
+
+MODULE_AUTHOR("S Twiss <stwiss.opensource@diasemi.com>");
+MODULE_DESCRIPTION("WDT device driver for Dialog DA9062 and DA9061");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9062-watchdog");
diff --git a/drivers/watchdog/da9063_wdt.c b/drivers/watchdog/da9063_wdt.c
new file mode 100644
index 000000000..384dca16a
--- /dev/null
+++ b/drivers/watchdog/da9063_wdt.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Watchdog driver for DA9063 PMICs.
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: Mariusz Wojtasik <mariusz.wojtasik@diasemi.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mfd/da9063/registers.h>
+#include <linux/mfd/da9063/core.h>
+#include <linux/regmap.h>
+
+/*
+ * Watchdog selector to timeout in seconds.
+ *   0: WDT disabled;
+ *   others: timeout = 2048 ms * 2^(TWDSCALE-1).
+ */
+static const unsigned int wdt_timeout[] = { 0, 2, 4, 8, 16, 32, 65, 131 };
+#define DA9063_TWDSCALE_DISABLE		0
+#define DA9063_TWDSCALE_MIN		1
+#define DA9063_TWDSCALE_MAX		(ARRAY_SIZE(wdt_timeout) - 1)
+#define DA9063_WDT_MIN_TIMEOUT		wdt_timeout[DA9063_TWDSCALE_MIN]
+#define DA9063_WDT_MAX_TIMEOUT		wdt_timeout[DA9063_TWDSCALE_MAX]
+#define DA9063_WDG_TIMEOUT		wdt_timeout[3]
+#define DA9063_RESET_PROTECTION_MS	256
+
+static unsigned int da9063_wdt_timeout_to_sel(unsigned int secs)
+{
+	unsigned int i;
+
+	for (i = DA9063_TWDSCALE_MIN; i <= DA9063_TWDSCALE_MAX; i++) {
+		if (wdt_timeout[i] >= secs)
+			return i;
+	}
+
+	return DA9063_TWDSCALE_MAX;
+}
+
+/*
+ * Return 0 if watchdog is disabled, else non zero.
+ */
+static unsigned int da9063_wdt_is_running(struct da9063 *da9063)
+{
+	unsigned int val;
+
+	regmap_read(da9063->regmap, DA9063_REG_CONTROL_D, &val);
+
+	return val & DA9063_TWDSCALE_MASK;
+}
+
+static int da9063_wdt_disable_timer(struct da9063 *da9063)
+{
+	return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D,
+				  DA9063_TWDSCALE_MASK,
+				  DA9063_TWDSCALE_DISABLE);
+}
+
+static int
+da9063_wdt_update_timeout(struct da9063 *da9063, unsigned int timeout)
+{
+	unsigned int regval;
+	int ret;
+
+	/*
+	 * The watchdog triggers a reboot if a timeout value is already
+	 * programmed because the timeout value combines two functions
+	 * in one: indicating the counter limit and starting the watchdog.
+	 * The watchdog must be disabled to be able to change the timeout
+	 * value if the watchdog is already running. Then we can set the
+	 * new timeout value which enables the watchdog again.
+	 */
+	ret = da9063_wdt_disable_timer(da9063);
+	if (ret)
+		return ret;
+
+	usleep_range(150, 300);
+	regval = da9063_wdt_timeout_to_sel(timeout);
+
+	return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D,
+				  DA9063_TWDSCALE_MASK, regval);
+}
+
+static int da9063_wdt_start(struct watchdog_device *wdd)
+{
+	struct da9063 *da9063 = watchdog_get_drvdata(wdd);
+	int ret;
+
+	ret = da9063_wdt_update_timeout(da9063, wdd->timeout);
+	if (ret)
+		dev_err(da9063->dev, "Watchdog failed to start (err = %d)\n",
+			ret);
+
+	return ret;
+}
+
+static int da9063_wdt_stop(struct watchdog_device *wdd)
+{
+	struct da9063 *da9063 = watchdog_get_drvdata(wdd);
+	int ret;
+
+	ret = da9063_wdt_disable_timer(da9063);
+	if (ret)
+		dev_alert(da9063->dev, "Watchdog failed to stop (err = %d)\n",
+			  ret);
+
+	return ret;
+}
+
+static int da9063_wdt_ping(struct watchdog_device *wdd)
+{
+	struct da9063 *da9063 = watchdog_get_drvdata(wdd);
+	int ret;
+
+	ret = regmap_write(da9063->regmap, DA9063_REG_CONTROL_F,
+			   DA9063_WATCHDOG);
+	if (ret)
+		dev_alert(da9063->dev, "Failed to ping the watchdog (err = %d)\n",
+			  ret);
+
+	return ret;
+}
+
+static int da9063_wdt_set_timeout(struct watchdog_device *wdd,
+				  unsigned int timeout)
+{
+	struct da9063 *da9063 = watchdog_get_drvdata(wdd);
+	int ret = 0;
+
+	/*
+	 * There are two cases when a set_timeout() will be called:
+	 * 1. The watchdog is off and someone wants to set the timeout for the
+	 *    further use.
+	 * 2. The watchdog is already running and a new timeout value should be
+	 *    set.
+	 *
+	 * The watchdog can't store a timeout value not equal zero without
+	 * enabling the watchdog, so the timeout must be buffered by the driver.
+	 */
+	if (watchdog_active(wdd))
+		ret = da9063_wdt_update_timeout(da9063, timeout);
+
+	if (ret)
+		dev_err(da9063->dev, "Failed to set watchdog timeout (err = %d)\n",
+			ret);
+	else
+		wdd->timeout = wdt_timeout[da9063_wdt_timeout_to_sel(timeout)];
+
+	return ret;
+}
+
+static int da9063_wdt_restart(struct watchdog_device *wdd, unsigned long action,
+			      void *data)
+{
+	struct da9063 *da9063 = watchdog_get_drvdata(wdd);
+	int ret;
+
+	ret = regmap_write(da9063->regmap, DA9063_REG_CONTROL_F,
+			   DA9063_SHUTDOWN);
+	if (ret)
+		dev_alert(da9063->dev, "Failed to shutdown (err = %d)\n",
+			  ret);
+
+	return ret;
+}
+
+static const struct watchdog_info da9063_watchdog_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.identity = "DA9063 Watchdog",
+};
+
+static const struct watchdog_ops da9063_watchdog_ops = {
+	.owner = THIS_MODULE,
+	.start = da9063_wdt_start,
+	.stop = da9063_wdt_stop,
+	.ping = da9063_wdt_ping,
+	.set_timeout = da9063_wdt_set_timeout,
+	.restart = da9063_wdt_restart,
+};
+
+static int da9063_wdt_probe(struct platform_device *pdev)
+{
+	struct da9063 *da9063;
+	struct watchdog_device *wdd;
+
+	if (!pdev->dev.parent)
+		return -EINVAL;
+
+	da9063 = dev_get_drvdata(pdev->dev.parent);
+	if (!da9063)
+		return -EINVAL;
+
+	wdd = devm_kzalloc(&pdev->dev, sizeof(*wdd), GFP_KERNEL);
+	if (!wdd)
+		return -ENOMEM;
+
+	wdd->info = &da9063_watchdog_info;
+	wdd->ops = &da9063_watchdog_ops;
+	wdd->min_timeout = DA9063_WDT_MIN_TIMEOUT;
+	wdd->max_timeout = DA9063_WDT_MAX_TIMEOUT;
+	wdd->min_hw_heartbeat_ms = DA9063_RESET_PROTECTION_MS;
+	wdd->timeout = DA9063_WDG_TIMEOUT;
+	wdd->parent = &pdev->dev;
+
+	wdd->status = WATCHDOG_NOWAYOUT_INIT_STATUS;
+
+	watchdog_set_restart_priority(wdd, 128);
+
+	watchdog_set_drvdata(wdd, da9063);
+
+	/* Change the timeout to the default value if the watchdog is running */
+	if (da9063_wdt_is_running(da9063)) {
+		da9063_wdt_update_timeout(da9063, DA9063_WDG_TIMEOUT);
+		set_bit(WDOG_HW_RUNNING, &wdd->status);
+	}
+
+	return devm_watchdog_register_device(&pdev->dev, wdd);
+}
+
+static struct platform_driver da9063_wdt_driver = {
+	.probe = da9063_wdt_probe,
+	.driver = {
+		.name = DA9063_DRVNAME_WATCHDOG,
+	},
+};
+module_platform_driver(da9063_wdt_driver);
+
+MODULE_AUTHOR("Mariusz Wojtasik <mariusz.wojtasik@diasemi.com>");
+MODULE_DESCRIPTION("Watchdog driver for Dialog DA9063");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DA9063_DRVNAME_WATCHDOG);
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
new file mode 100644
index 000000000..ebb85d60b
--- /dev/null
+++ b/drivers/watchdog/davinci_wdt.c
@@ -0,0 +1,296 @@
+/*
+ * drivers/char/watchdog/davinci_wdt.c
+ *
+ * Watchdog driver for DaVinci DM644x/DM646x processors
+ *
+ * Copyright (C) 2006-2013 Texas Instruments.
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/mod_devicetable.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#define MODULE_NAME "DAVINCI-WDT: "
+
+#define DEFAULT_HEARTBEAT 60
+#define MAX_HEARTBEAT     600	/* really the max margin is 264/27MHz*/
+
+/* Timer register set definition */
+#define PID12	(0x0)
+#define EMUMGT	(0x4)
+#define TIM12	(0x10)
+#define TIM34	(0x14)
+#define PRD12	(0x18)
+#define PRD34	(0x1C)
+#define TCR	(0x20)
+#define TGCR	(0x24)
+#define WDTCR	(0x28)
+
+/* TCR bit definitions */
+#define ENAMODE12_DISABLED	(0 << 6)
+#define ENAMODE12_ONESHOT	(1 << 6)
+#define ENAMODE12_PERIODIC	(2 << 6)
+
+/* TGCR bit definitions */
+#define TIM12RS_UNRESET		(1 << 0)
+#define TIM34RS_UNRESET		(1 << 1)
+#define TIMMODE_64BIT_WDOG      (2 << 2)
+
+/* WDTCR bit definitions */
+#define WDEN			(1 << 14)
+#define WDFLAG			(1 << 15)
+#define WDKEY_SEQ0		(0xa5c6 << 16)
+#define WDKEY_SEQ1		(0xda7e << 16)
+
+static int heartbeat;
+
+/*
+ * struct to hold data for each WDT device
+ * @base - base io address of WD device
+ * @clk - source clock of WDT
+ * @wdd - hold watchdog device as is in WDT core
+ */
+struct davinci_wdt_device {
+	void __iomem		*base;
+	struct clk		*clk;
+	struct watchdog_device	wdd;
+};
+
+static int davinci_wdt_start(struct watchdog_device *wdd)
+{
+	u32 tgcr;
+	u32 timer_margin;
+	unsigned long wdt_freq;
+	struct davinci_wdt_device *davinci_wdt = watchdog_get_drvdata(wdd);
+
+	wdt_freq = clk_get_rate(davinci_wdt->clk);
+
+	/* disable, internal clock source */
+	iowrite32(0, davinci_wdt->base + TCR);
+	/* reset timer, set mode to 64-bit watchdog, and unreset */
+	iowrite32(0, davinci_wdt->base + TGCR);
+	tgcr = TIMMODE_64BIT_WDOG | TIM12RS_UNRESET | TIM34RS_UNRESET;
+	iowrite32(tgcr, davinci_wdt->base + TGCR);
+	/* clear counter regs */
+	iowrite32(0, davinci_wdt->base + TIM12);
+	iowrite32(0, davinci_wdt->base + TIM34);
+	/* set timeout period */
+	timer_margin = (((u64)wdd->timeout * wdt_freq) & 0xffffffff);
+	iowrite32(timer_margin, davinci_wdt->base + PRD12);
+	timer_margin = (((u64)wdd->timeout * wdt_freq) >> 32);
+	iowrite32(timer_margin, davinci_wdt->base + PRD34);
+	/* enable run continuously */
+	iowrite32(ENAMODE12_PERIODIC, davinci_wdt->base + TCR);
+	/* Once the WDT is in pre-active state write to
+	 * TIM12, TIM34, PRD12, PRD34, TCR, TGCR, WDTCR are
+	 * write protected (except for the WDKEY field)
+	 */
+	/* put watchdog in pre-active state */
+	iowrite32(WDKEY_SEQ0 | WDEN, davinci_wdt->base + WDTCR);
+	/* put watchdog in active state */
+	iowrite32(WDKEY_SEQ1 | WDEN, davinci_wdt->base + WDTCR);
+	return 0;
+}
+
+static int davinci_wdt_ping(struct watchdog_device *wdd)
+{
+	struct davinci_wdt_device *davinci_wdt = watchdog_get_drvdata(wdd);
+
+	/* put watchdog in service state */
+	iowrite32(WDKEY_SEQ0, davinci_wdt->base + WDTCR);
+	/* put watchdog in active state */
+	iowrite32(WDKEY_SEQ1, davinci_wdt->base + WDTCR);
+	return 0;
+}
+
+static unsigned int davinci_wdt_get_timeleft(struct watchdog_device *wdd)
+{
+	u64 timer_counter;
+	unsigned long freq;
+	u32 val;
+	struct davinci_wdt_device *davinci_wdt = watchdog_get_drvdata(wdd);
+
+	/* if timeout has occured then return 0 */
+	val = ioread32(davinci_wdt->base + WDTCR);
+	if (val & WDFLAG)
+		return 0;
+
+	freq = clk_get_rate(davinci_wdt->clk);
+
+	if (!freq)
+		return 0;
+
+	timer_counter = ioread32(davinci_wdt->base + TIM12);
+	timer_counter |= ((u64)ioread32(davinci_wdt->base + TIM34) << 32);
+
+	do_div(timer_counter, freq);
+
+	return wdd->timeout - timer_counter;
+}
+
+static int davinci_wdt_restart(struct watchdog_device *wdd,
+			       unsigned long action, void *data)
+{
+	struct davinci_wdt_device *davinci_wdt = watchdog_get_drvdata(wdd);
+	u32 tgcr, wdtcr;
+
+	/* disable, internal clock source */
+	iowrite32(0, davinci_wdt->base + TCR);
+
+	/* reset timer, set mode to 64-bit watchdog, and unreset */
+	tgcr = 0;
+	iowrite32(tgcr, davinci_wdt->base + TGCR);
+	tgcr = TIMMODE_64BIT_WDOG | TIM12RS_UNRESET | TIM34RS_UNRESET;
+	iowrite32(tgcr, davinci_wdt->base + TGCR);
+
+	/* clear counter and period regs */
+	iowrite32(0, davinci_wdt->base + TIM12);
+	iowrite32(0, davinci_wdt->base + TIM34);
+	iowrite32(0, davinci_wdt->base + PRD12);
+	iowrite32(0, davinci_wdt->base + PRD34);
+
+	/* put watchdog in pre-active state */
+	wdtcr = WDKEY_SEQ0 | WDEN;
+	iowrite32(wdtcr, davinci_wdt->base + WDTCR);
+
+	/* put watchdog in active state */
+	wdtcr = WDKEY_SEQ1 | WDEN;
+	iowrite32(wdtcr, davinci_wdt->base + WDTCR);
+
+	/* write an invalid value to the WDKEY field to trigger a restart */
+	wdtcr = 0x00004000;
+	iowrite32(wdtcr, davinci_wdt->base + WDTCR);
+
+	return 0;
+}
+
+static const struct watchdog_info davinci_wdt_info = {
+	.options = WDIOF_KEEPALIVEPING,
+	.identity = "DaVinci/Keystone Watchdog",
+};
+
+static const struct watchdog_ops davinci_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= davinci_wdt_start,
+	.stop		= davinci_wdt_ping,
+	.ping		= davinci_wdt_ping,
+	.get_timeleft	= davinci_wdt_get_timeleft,
+	.restart	= davinci_wdt_restart,
+};
+
+static int davinci_wdt_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct device *dev = &pdev->dev;
+	struct resource  *wdt_mem;
+	struct watchdog_device *wdd;
+	struct davinci_wdt_device *davinci_wdt;
+
+	davinci_wdt = devm_kzalloc(dev, sizeof(*davinci_wdt), GFP_KERNEL);
+	if (!davinci_wdt)
+		return -ENOMEM;
+
+	davinci_wdt->clk = devm_clk_get(dev, NULL);
+
+	if (IS_ERR(davinci_wdt->clk)) {
+		if (PTR_ERR(davinci_wdt->clk) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "failed to get clock node\n");
+		return PTR_ERR(davinci_wdt->clk);
+	}
+
+	ret = clk_prepare_enable(davinci_wdt->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to prepare clock\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, davinci_wdt);
+
+	wdd			= &davinci_wdt->wdd;
+	wdd->info		= &davinci_wdt_info;
+	wdd->ops		= &davinci_wdt_ops;
+	wdd->min_timeout	= 1;
+	wdd->max_timeout	= MAX_HEARTBEAT;
+	wdd->timeout		= DEFAULT_HEARTBEAT;
+	wdd->parent		= &pdev->dev;
+
+	watchdog_init_timeout(wdd, heartbeat, dev);
+
+	dev_info(dev, "heartbeat %d sec\n", wdd->timeout);
+
+	watchdog_set_drvdata(wdd, davinci_wdt);
+	watchdog_set_nowayout(wdd, 1);
+	watchdog_set_restart_priority(wdd, 128);
+
+	wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	davinci_wdt->base = devm_ioremap_resource(dev, wdt_mem);
+	if (IS_ERR(davinci_wdt->base)) {
+		ret = PTR_ERR(davinci_wdt->base);
+		goto err_clk_disable;
+	}
+
+	ret = watchdog_register_device(wdd);
+	if (ret) {
+		dev_err(dev, "cannot register watchdog device\n");
+		goto err_clk_disable;
+	}
+
+	return 0;
+
+err_clk_disable:
+	clk_disable_unprepare(davinci_wdt->clk);
+
+	return ret;
+}
+
+static int davinci_wdt_remove(struct platform_device *pdev)
+{
+	struct davinci_wdt_device *davinci_wdt = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&davinci_wdt->wdd);
+	clk_disable_unprepare(davinci_wdt->clk);
+
+	return 0;
+}
+
+static const struct of_device_id davinci_wdt_of_match[] = {
+	{ .compatible = "ti,davinci-wdt", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, davinci_wdt_of_match);
+
+static struct platform_driver platform_wdt_driver = {
+	.driver = {
+		.name = "davinci-wdt",
+		.of_match_table = davinci_wdt_of_match,
+	},
+	.probe = davinci_wdt_probe,
+	.remove = davinci_wdt_remove,
+};
+
+module_platform_driver(platform_wdt_driver);
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("DaVinci Watchdog Driver");
+
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat,
+		 "Watchdog heartbeat period in seconds from 1 to "
+		 __MODULE_STRING(MAX_HEARTBEAT) ", default "
+		 __MODULE_STRING(DEFAULT_HEARTBEAT));
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:davinci-wdt");
diff --git a/drivers/watchdog/diag288_wdt.c b/drivers/watchdog/diag288_wdt.c
new file mode 100644
index 000000000..806a04a67
--- /dev/null
+++ b/drivers/watchdog/diag288_wdt.c
@@ -0,0 +1,316 @@
+/*
+ * Watchdog driver for z/VM and LPAR using the diag 288 interface.
+ *
+ * Under z/VM, expiration of the watchdog will send a "system restart" command
+ * to CP.
+ *
+ * The command can be altered using the module parameter "cmd". This is
+ * not recommended because it's only supported on z/VM but not whith LPAR.
+ *
+ * On LPAR, the watchdog will always trigger a system restart. the module
+ * paramter cmd is meaningless here.
+ *
+ *
+ * Copyright IBM Corp. 2004, 2013
+ * Author(s): Arnd Bergmann (arndb@de.ibm.com)
+ *	      Philipp Hachtmann (phacht@de.ibm.com)
+ *
+ */
+
+#define KMSG_COMPONENT "diag288_wdt"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/suspend.h>
+#include <asm/ebcdic.h>
+#include <asm/diag.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#define MAX_CMDLEN 240
+#define DEFAULT_CMD "SYSTEM RESTART"
+
+#define MIN_INTERVAL 15     /* Minimal time supported by diag88 */
+#define MAX_INTERVAL 3600   /* One hour should be enough - pure estimation */
+
+#define WDT_DEFAULT_TIMEOUT 30
+
+/* Function codes - init, change, cancel */
+#define WDT_FUNC_INIT 0
+#define WDT_FUNC_CHANGE 1
+#define WDT_FUNC_CANCEL 2
+#define WDT_FUNC_CONCEAL 0x80000000
+
+/* Action codes for LPAR watchdog */
+#define LPARWDT_RESTART 0
+
+static char wdt_cmd[MAX_CMDLEN] = DEFAULT_CMD;
+static bool conceal_on;
+static bool nowayout_info = WATCHDOG_NOWAYOUT;
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Arnd Bergmann <arndb@de.ibm.com>");
+MODULE_AUTHOR("Philipp Hachtmann <phacht@de.ibm.com>");
+
+MODULE_DESCRIPTION("System z diag288  Watchdog Timer");
+
+module_param_string(cmd, wdt_cmd, MAX_CMDLEN, 0644);
+MODULE_PARM_DESC(cmd, "CP command that is run when the watchdog triggers (z/VM only)");
+
+module_param_named(conceal, conceal_on, bool, 0644);
+MODULE_PARM_DESC(conceal, "Enable the CONCEAL CP option while the watchdog is active (z/VM only)");
+
+module_param_named(nowayout, nowayout_info, bool, 0444);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default = CONFIG_WATCHDOG_NOWAYOUT)");
+
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("vmwatchdog");
+
+static int __diag288(unsigned int func, unsigned int timeout,
+		     unsigned long action, unsigned int len)
+{
+	register unsigned long __func asm("2") = func;
+	register unsigned long __timeout asm("3") = timeout;
+	register unsigned long __action asm("4") = action;
+	register unsigned long __len asm("5") = len;
+	int err;
+
+	err = -EINVAL;
+	asm volatile(
+		"	diag	%1, %3, 0x288\n"
+		"0:	la	%0, 0\n"
+		"1:\n"
+		EX_TABLE(0b, 1b)
+		: "+d" (err) : "d"(__func), "d"(__timeout),
+		  "d"(__action), "d"(__len) : "1", "cc");
+	return err;
+}
+
+static int __diag288_vm(unsigned int  func, unsigned int timeout,
+			char *cmd, size_t len)
+{
+	diag_stat_inc(DIAG_STAT_X288);
+	return __diag288(func, timeout, virt_to_phys(cmd), len);
+}
+
+static int __diag288_lpar(unsigned int func, unsigned int timeout,
+			  unsigned long action)
+{
+	diag_stat_inc(DIAG_STAT_X288);
+	return __diag288(func, timeout, action, 0);
+}
+
+static unsigned long wdt_status;
+
+#define DIAG_WDOG_BUSY	0
+
+static int wdt_start(struct watchdog_device *dev)
+{
+	char *ebc_cmd;
+	size_t len;
+	int ret;
+	unsigned int func;
+
+	if (test_and_set_bit(DIAG_WDOG_BUSY, &wdt_status))
+		return -EBUSY;
+
+	ret = -ENODEV;
+
+	if (MACHINE_IS_VM) {
+		ebc_cmd = kmalloc(MAX_CMDLEN, GFP_KERNEL);
+		if (!ebc_cmd) {
+			clear_bit(DIAG_WDOG_BUSY, &wdt_status);
+			return -ENOMEM;
+		}
+		len = strlcpy(ebc_cmd, wdt_cmd, MAX_CMDLEN);
+		ASCEBC(ebc_cmd, MAX_CMDLEN);
+		EBC_TOUPPER(ebc_cmd, MAX_CMDLEN);
+
+		func = conceal_on ? (WDT_FUNC_INIT | WDT_FUNC_CONCEAL)
+			: WDT_FUNC_INIT;
+		ret = __diag288_vm(func, dev->timeout, ebc_cmd, len);
+		WARN_ON(ret != 0);
+		kfree(ebc_cmd);
+	} else {
+		ret = __diag288_lpar(WDT_FUNC_INIT,
+				     dev->timeout, LPARWDT_RESTART);
+	}
+
+	if (ret) {
+		pr_err("The watchdog cannot be activated\n");
+		clear_bit(DIAG_WDOG_BUSY, &wdt_status);
+		return ret;
+	}
+	return 0;
+}
+
+static int wdt_stop(struct watchdog_device *dev)
+{
+	int ret;
+
+	diag_stat_inc(DIAG_STAT_X288);
+	ret = __diag288(WDT_FUNC_CANCEL, 0, 0, 0);
+
+	clear_bit(DIAG_WDOG_BUSY, &wdt_status);
+
+	return ret;
+}
+
+static int wdt_ping(struct watchdog_device *dev)
+{
+	char *ebc_cmd;
+	size_t len;
+	int ret;
+	unsigned int func;
+
+	ret = -ENODEV;
+
+	if (MACHINE_IS_VM) {
+		ebc_cmd = kmalloc(MAX_CMDLEN, GFP_KERNEL);
+		if (!ebc_cmd)
+			return -ENOMEM;
+		len = strlcpy(ebc_cmd, wdt_cmd, MAX_CMDLEN);
+		ASCEBC(ebc_cmd, MAX_CMDLEN);
+		EBC_TOUPPER(ebc_cmd, MAX_CMDLEN);
+
+		/*
+		 * It seems to be ok to z/VM to use the init function to
+		 * retrigger the watchdog. On LPAR WDT_FUNC_CHANGE must
+		 * be used when the watchdog is running.
+		 */
+		func = conceal_on ? (WDT_FUNC_INIT | WDT_FUNC_CONCEAL)
+			: WDT_FUNC_INIT;
+
+		ret = __diag288_vm(func, dev->timeout, ebc_cmd, len);
+		WARN_ON(ret != 0);
+		kfree(ebc_cmd);
+	} else {
+		ret = __diag288_lpar(WDT_FUNC_CHANGE, dev->timeout, 0);
+	}
+
+	if (ret)
+		pr_err("The watchdog timer cannot be started or reset\n");
+	return ret;
+}
+
+static int wdt_set_timeout(struct watchdog_device * dev, unsigned int new_to)
+{
+	dev->timeout = new_to;
+	return wdt_ping(dev);
+}
+
+static const struct watchdog_ops wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = wdt_start,
+	.stop = wdt_stop,
+	.ping = wdt_ping,
+	.set_timeout = wdt_set_timeout,
+};
+
+static const struct watchdog_info wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.firmware_version = 0,
+	.identity = "z Watchdog",
+};
+
+static struct watchdog_device wdt_dev = {
+	.parent = NULL,
+	.info = &wdt_info,
+	.ops = &wdt_ops,
+	.bootstatus = 0,
+	.timeout = WDT_DEFAULT_TIMEOUT,
+	.min_timeout = MIN_INTERVAL,
+	.max_timeout = MAX_INTERVAL,
+};
+
+/*
+ * It makes no sense to go into suspend while the watchdog is running.
+ * Depending on the memory size, the watchdog might trigger, while we
+ * are still saving the memory.
+ */
+static int wdt_suspend(void)
+{
+	if (test_and_set_bit(DIAG_WDOG_BUSY, &wdt_status)) {
+		pr_err("Linux cannot be suspended while the watchdog is in use\n");
+		return notifier_from_errno(-EBUSY);
+	}
+	return NOTIFY_DONE;
+}
+
+static int wdt_resume(void)
+{
+	clear_bit(DIAG_WDOG_BUSY, &wdt_status);
+	return NOTIFY_DONE;
+}
+
+static int wdt_power_event(struct notifier_block *this, unsigned long event,
+			   void *ptr)
+{
+	switch (event) {
+	case PM_POST_HIBERNATION:
+	case PM_POST_SUSPEND:
+		return wdt_resume();
+	case PM_HIBERNATION_PREPARE:
+	case PM_SUSPEND_PREPARE:
+		return wdt_suspend();
+	default:
+		return NOTIFY_DONE;
+	}
+}
+
+static struct notifier_block wdt_power_notifier = {
+	.notifier_call = wdt_power_event,
+};
+
+static int __init diag288_init(void)
+{
+	int ret;
+	char ebc_begin[] = {
+		194, 197, 199, 201, 213
+	};
+
+	watchdog_set_nowayout(&wdt_dev, nowayout_info);
+
+	if (MACHINE_IS_VM) {
+		if (__diag288_vm(WDT_FUNC_INIT, 15,
+				 ebc_begin, sizeof(ebc_begin)) != 0) {
+			pr_err("The watchdog cannot be initialized\n");
+			return -EINVAL;
+		}
+	} else {
+		if (__diag288_lpar(WDT_FUNC_INIT, 30, LPARWDT_RESTART)) {
+			pr_err("The watchdog cannot be initialized\n");
+			return -EINVAL;
+		}
+	}
+
+	if (__diag288_lpar(WDT_FUNC_CANCEL, 0, 0)) {
+		pr_err("The watchdog cannot be deactivated\n");
+		return -EINVAL;
+	}
+
+	ret = register_pm_notifier(&wdt_power_notifier);
+	if (ret)
+		return ret;
+
+	ret = watchdog_register_device(&wdt_dev);
+	if (ret)
+		unregister_pm_notifier(&wdt_power_notifier);
+
+	return ret;
+}
+
+static void __exit diag288_exit(void)
+{
+	watchdog_unregister_device(&wdt_dev);
+	unregister_pm_notifier(&wdt_power_notifier);
+}
+
+module_init(diag288_init);
+module_exit(diag288_exit);
diff --git a/drivers/watchdog/digicolor_wdt.c b/drivers/watchdog/digicolor_wdt.c
new file mode 100644
index 000000000..a9e11df15
--- /dev/null
+++ b/drivers/watchdog/digicolor_wdt.c
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Watchdog driver for Conexant Digicolor
+ *
+ * Copyright (C) 2015 Paradox Innovation Ltd.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+
+#define TIMER_A_CONTROL		0
+#define TIMER_A_COUNT		4
+
+#define TIMER_A_ENABLE_COUNT	BIT(0)
+#define TIMER_A_ENABLE_WATCHDOG	BIT(1)
+
+struct dc_wdt {
+	void __iomem		*base;
+	struct clk		*clk;
+	spinlock_t		lock;
+};
+
+static unsigned timeout;
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds");
+
+static void dc_wdt_set(struct dc_wdt *wdt, u32 ticks)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdt->lock, flags);
+
+	writel_relaxed(0, wdt->base + TIMER_A_CONTROL);
+	writel_relaxed(ticks, wdt->base + TIMER_A_COUNT);
+	writel_relaxed(TIMER_A_ENABLE_COUNT | TIMER_A_ENABLE_WATCHDOG,
+		       wdt->base + TIMER_A_CONTROL);
+
+	spin_unlock_irqrestore(&wdt->lock, flags);
+}
+
+static int dc_wdt_restart(struct watchdog_device *wdog, unsigned long action,
+			  void *data)
+{
+	struct dc_wdt *wdt = watchdog_get_drvdata(wdog);
+
+	dc_wdt_set(wdt, 1);
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	return 0;
+}
+
+static int dc_wdt_start(struct watchdog_device *wdog)
+{
+	struct dc_wdt *wdt = watchdog_get_drvdata(wdog);
+
+	dc_wdt_set(wdt, wdog->timeout * clk_get_rate(wdt->clk));
+
+	return 0;
+}
+
+static int dc_wdt_stop(struct watchdog_device *wdog)
+{
+	struct dc_wdt *wdt = watchdog_get_drvdata(wdog);
+
+	writel_relaxed(0, wdt->base + TIMER_A_CONTROL);
+
+	return 0;
+}
+
+static int dc_wdt_set_timeout(struct watchdog_device *wdog, unsigned int t)
+{
+	struct dc_wdt *wdt = watchdog_get_drvdata(wdog);
+
+	dc_wdt_set(wdt, t * clk_get_rate(wdt->clk));
+	wdog->timeout = t;
+
+	return 0;
+}
+
+static unsigned int dc_wdt_get_timeleft(struct watchdog_device *wdog)
+{
+	struct dc_wdt *wdt = watchdog_get_drvdata(wdog);
+	uint32_t count = readl_relaxed(wdt->base + TIMER_A_COUNT);
+
+	return count / clk_get_rate(wdt->clk);
+}
+
+static const struct watchdog_ops dc_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= dc_wdt_start,
+	.stop		= dc_wdt_stop,
+	.set_timeout	= dc_wdt_set_timeout,
+	.get_timeleft	= dc_wdt_get_timeleft,
+	.restart        = dc_wdt_restart,
+};
+
+static const struct watchdog_info dc_wdt_info = {
+	.options	= WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE
+			| WDIOF_KEEPALIVEPING,
+	.identity	= "Conexant Digicolor Watchdog",
+};
+
+static struct watchdog_device dc_wdt_wdd = {
+	.info		= &dc_wdt_info,
+	.ops		= &dc_wdt_ops,
+	.min_timeout	= 1,
+};
+
+static int dc_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct dc_wdt *wdt;
+	int ret;
+
+	wdt = devm_kzalloc(dev, sizeof(struct dc_wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(wdt->base))
+		return PTR_ERR(wdt->base);
+
+	wdt->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(wdt->clk))
+		return PTR_ERR(wdt->clk);
+	dc_wdt_wdd.max_timeout = U32_MAX / clk_get_rate(wdt->clk);
+	dc_wdt_wdd.timeout = dc_wdt_wdd.max_timeout;
+	dc_wdt_wdd.parent = dev;
+
+	spin_lock_init(&wdt->lock);
+
+	watchdog_set_drvdata(&dc_wdt_wdd, wdt);
+	watchdog_set_restart_priority(&dc_wdt_wdd, 128);
+	watchdog_init_timeout(&dc_wdt_wdd, timeout, dev);
+	watchdog_stop_on_reboot(&dc_wdt_wdd);
+	ret = devm_watchdog_register_device(dev, &dc_wdt_wdd);
+	if (ret) {
+		dev_err(dev, "Failed to register watchdog device");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id dc_wdt_of_match[] = {
+	{ .compatible = "cnxt,cx92755-wdt", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, dc_wdt_of_match);
+
+static struct platform_driver dc_wdt_driver = {
+	.probe		= dc_wdt_probe,
+	.driver = {
+		.name =		"digicolor-wdt",
+		.of_match_table = dc_wdt_of_match,
+	},
+};
+module_platform_driver(dc_wdt_driver);
+
+MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
+MODULE_DESCRIPTION("Driver for Conexant Digicolor watchdog timer");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/dw_wdt.c b/drivers/watchdog/dw_wdt.c
new file mode 100644
index 000000000..501aebb5b
--- /dev/null
+++ b/drivers/watchdog/dw_wdt.c
@@ -0,0 +1,350 @@
+/*
+ * Copyright 2010-2011 Picochip Ltd., Jamie Iles
+ * http://www.picochip.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This file implements a driver for the Synopsys DesignWare watchdog device
+ * in the many subsystems. The watchdog has 16 different timeout periods
+ * and these are a function of the input clock frequency.
+ *
+ * The DesignWare watchdog cannot be stopped once it has been started so we
+ * do not implement a stop function. The watchdog core will continue to send
+ * heartbeat requests after the watchdog device has been closed.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/of.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/watchdog.h>
+
+#define WDOG_CONTROL_REG_OFFSET		    0x00
+#define WDOG_CONTROL_REG_WDT_EN_MASK	    0x01
+#define WDOG_CONTROL_REG_RESP_MODE_MASK	    0x02
+#define WDOG_TIMEOUT_RANGE_REG_OFFSET	    0x04
+#define WDOG_TIMEOUT_RANGE_TOPINIT_SHIFT    4
+#define WDOG_CURRENT_COUNT_REG_OFFSET	    0x08
+#define WDOG_COUNTER_RESTART_REG_OFFSET     0x0c
+#define WDOG_COUNTER_RESTART_KICK_VALUE	    0x76
+
+/* The maximum TOP (timeout period) value that can be set in the watchdog. */
+#define DW_WDT_MAX_TOP		15
+
+#define DW_WDT_DEFAULT_SECONDS	30
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+		 "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct dw_wdt {
+	void __iomem		*regs;
+	struct clk		*clk;
+	unsigned long		rate;
+	struct watchdog_device	wdd;
+	struct reset_control	*rst;
+	/* Save/restore */
+	u32			control;
+	u32			timeout;
+};
+
+#define to_dw_wdt(wdd)	container_of(wdd, struct dw_wdt, wdd)
+
+static inline int dw_wdt_is_enabled(struct dw_wdt *dw_wdt)
+{
+	return readl(dw_wdt->regs + WDOG_CONTROL_REG_OFFSET) &
+		WDOG_CONTROL_REG_WDT_EN_MASK;
+}
+
+static inline int dw_wdt_top_in_seconds(struct dw_wdt *dw_wdt, unsigned top)
+{
+	/*
+	 * There are 16 possible timeout values in 0..15 where the number of
+	 * cycles is 2 ^ (16 + i) and the watchdog counts down.
+	 */
+	return (1U << (16 + top)) / dw_wdt->rate;
+}
+
+static int dw_wdt_get_top(struct dw_wdt *dw_wdt)
+{
+	int top = readl(dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET) & 0xF;
+
+	return dw_wdt_top_in_seconds(dw_wdt, top);
+}
+
+static int dw_wdt_ping(struct watchdog_device *wdd)
+{
+	struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
+
+	writel(WDOG_COUNTER_RESTART_KICK_VALUE, dw_wdt->regs +
+	       WDOG_COUNTER_RESTART_REG_OFFSET);
+
+	return 0;
+}
+
+static int dw_wdt_set_timeout(struct watchdog_device *wdd, unsigned int top_s)
+{
+	struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
+	int i, top_val = DW_WDT_MAX_TOP;
+
+	/*
+	 * Iterate over the timeout values until we find the closest match. We
+	 * always look for >=.
+	 */
+	for (i = 0; i <= DW_WDT_MAX_TOP; ++i)
+		if (dw_wdt_top_in_seconds(dw_wdt, i) >= top_s) {
+			top_val = i;
+			break;
+		}
+
+	/*
+	 * Set the new value in the watchdog.  Some versions of dw_wdt
+	 * have have TOPINIT in the TIMEOUT_RANGE register (as per
+	 * CP_WDT_DUAL_TOP in WDT_COMP_PARAMS_1).  On those we
+	 * effectively get a pat of the watchdog right here.
+	 */
+	writel(top_val | top_val << WDOG_TIMEOUT_RANGE_TOPINIT_SHIFT,
+	       dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
+
+	wdd->timeout = dw_wdt_top_in_seconds(dw_wdt, top_val);
+
+	return 0;
+}
+
+static void dw_wdt_arm_system_reset(struct dw_wdt *dw_wdt)
+{
+	u32 val = readl(dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
+
+	/* Disable interrupt mode; always perform system reset. */
+	val &= ~WDOG_CONTROL_REG_RESP_MODE_MASK;
+	/* Enable watchdog. */
+	val |= WDOG_CONTROL_REG_WDT_EN_MASK;
+	writel(val, dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
+}
+
+static int dw_wdt_start(struct watchdog_device *wdd)
+{
+	struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
+
+	dw_wdt_set_timeout(wdd, wdd->timeout);
+	dw_wdt_arm_system_reset(dw_wdt);
+
+	return 0;
+}
+
+static int dw_wdt_stop(struct watchdog_device *wdd)
+{
+	struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
+
+	if (!dw_wdt->rst) {
+		set_bit(WDOG_HW_RUNNING, &wdd->status);
+		return 0;
+	}
+
+	reset_control_assert(dw_wdt->rst);
+	reset_control_deassert(dw_wdt->rst);
+
+	return 0;
+}
+
+static int dw_wdt_restart(struct watchdog_device *wdd,
+			  unsigned long action, void *data)
+{
+	struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
+
+	writel(0, dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
+	if (dw_wdt_is_enabled(dw_wdt))
+		writel(WDOG_COUNTER_RESTART_KICK_VALUE,
+		       dw_wdt->regs + WDOG_COUNTER_RESTART_REG_OFFSET);
+	else
+		dw_wdt_arm_system_reset(dw_wdt);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	return 0;
+}
+
+static unsigned int dw_wdt_get_timeleft(struct watchdog_device *wdd)
+{
+	struct dw_wdt *dw_wdt = to_dw_wdt(wdd);
+
+	return readl(dw_wdt->regs + WDOG_CURRENT_COUNT_REG_OFFSET) /
+		dw_wdt->rate;
+}
+
+static const struct watchdog_info dw_wdt_ident = {
+	.options	= WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+			  WDIOF_MAGICCLOSE,
+	.identity	= "Synopsys DesignWare Watchdog",
+};
+
+static const struct watchdog_ops dw_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= dw_wdt_start,
+	.stop		= dw_wdt_stop,
+	.ping		= dw_wdt_ping,
+	.set_timeout	= dw_wdt_set_timeout,
+	.get_timeleft	= dw_wdt_get_timeleft,
+	.restart	= dw_wdt_restart,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int dw_wdt_suspend(struct device *dev)
+{
+	struct dw_wdt *dw_wdt = dev_get_drvdata(dev);
+
+	dw_wdt->control = readl(dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
+	dw_wdt->timeout = readl(dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
+
+	clk_disable_unprepare(dw_wdt->clk);
+
+	return 0;
+}
+
+static int dw_wdt_resume(struct device *dev)
+{
+	struct dw_wdt *dw_wdt = dev_get_drvdata(dev);
+	int err = clk_prepare_enable(dw_wdt->clk);
+
+	if (err)
+		return err;
+
+	writel(dw_wdt->timeout, dw_wdt->regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
+	writel(dw_wdt->control, dw_wdt->regs + WDOG_CONTROL_REG_OFFSET);
+
+	dw_wdt_ping(&dw_wdt->wdd);
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(dw_wdt_pm_ops, dw_wdt_suspend, dw_wdt_resume);
+
+static int dw_wdt_drv_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct watchdog_device *wdd;
+	struct dw_wdt *dw_wdt;
+	struct resource *mem;
+	int ret;
+
+	dw_wdt = devm_kzalloc(dev, sizeof(*dw_wdt), GFP_KERNEL);
+	if (!dw_wdt)
+		return -ENOMEM;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dw_wdt->regs = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(dw_wdt->regs))
+		return PTR_ERR(dw_wdt->regs);
+
+	dw_wdt->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(dw_wdt->clk))
+		return PTR_ERR(dw_wdt->clk);
+
+	ret = clk_prepare_enable(dw_wdt->clk);
+	if (ret)
+		return ret;
+
+	dw_wdt->rate = clk_get_rate(dw_wdt->clk);
+	if (dw_wdt->rate == 0) {
+		ret = -EINVAL;
+		goto out_disable_clk;
+	}
+
+	dw_wdt->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
+	if (IS_ERR(dw_wdt->rst)) {
+		ret = PTR_ERR(dw_wdt->rst);
+		goto out_disable_clk;
+	}
+
+	reset_control_deassert(dw_wdt->rst);
+
+	wdd = &dw_wdt->wdd;
+	wdd->info = &dw_wdt_ident;
+	wdd->ops = &dw_wdt_ops;
+	wdd->min_timeout = 1;
+	wdd->max_hw_heartbeat_ms =
+		dw_wdt_top_in_seconds(dw_wdt, DW_WDT_MAX_TOP) * 1000;
+	wdd->parent = dev;
+
+	watchdog_set_drvdata(wdd, dw_wdt);
+	watchdog_set_nowayout(wdd, nowayout);
+	watchdog_init_timeout(wdd, 0, dev);
+
+	/*
+	 * If the watchdog is already running, use its already configured
+	 * timeout. Otherwise use the default or the value provided through
+	 * devicetree.
+	 */
+	if (dw_wdt_is_enabled(dw_wdt)) {
+		wdd->timeout = dw_wdt_get_top(dw_wdt);
+		set_bit(WDOG_HW_RUNNING, &wdd->status);
+	} else {
+		wdd->timeout = DW_WDT_DEFAULT_SECONDS;
+		watchdog_init_timeout(wdd, 0, dev);
+	}
+
+	platform_set_drvdata(pdev, dw_wdt);
+
+	watchdog_set_restart_priority(wdd, 128);
+
+	ret = watchdog_register_device(wdd);
+	if (ret)
+		goto out_disable_clk;
+
+	return 0;
+
+out_disable_clk:
+	clk_disable_unprepare(dw_wdt->clk);
+	return ret;
+}
+
+static int dw_wdt_drv_remove(struct platform_device *pdev)
+{
+	struct dw_wdt *dw_wdt = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&dw_wdt->wdd);
+	reset_control_assert(dw_wdt->rst);
+	clk_disable_unprepare(dw_wdt->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id dw_wdt_of_match[] = {
+	{ .compatible = "snps,dw-wdt", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, dw_wdt_of_match);
+#endif
+
+static struct platform_driver dw_wdt_driver = {
+	.probe		= dw_wdt_drv_probe,
+	.remove		= dw_wdt_drv_remove,
+	.driver		= {
+		.name	= "dw_wdt",
+		.of_match_table = of_match_ptr(dw_wdt_of_match),
+		.pm	= &dw_wdt_pm_ops,
+	},
+};
+
+module_platform_driver(dw_wdt_driver);
+
+MODULE_AUTHOR("Jamie Iles");
+MODULE_DESCRIPTION("Synopsys DesignWare Watchdog Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/ebc-c384_wdt.c b/drivers/watchdog/ebc-c384_wdt.c
new file mode 100644
index 000000000..4c4c8ce78
--- /dev/null
+++ b/drivers/watchdog/ebc-c384_wdt.c
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Watchdog timer driver for the WinSystems EBC-C384
+ * Copyright (C) 2016 William Breathitt Gray
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+#include <linux/device.h>
+#include <linux/dmi.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/isa.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+#define MODULE_NAME		"ebc-c384_wdt"
+#define WATCHDOG_TIMEOUT	60
+/*
+ * The timeout value in minutes must fit in a single byte when sent to the
+ * watchdog timer; the maximum timeout possible is 15300 (255 * 60) seconds.
+ */
+#define WATCHDOG_MAX_TIMEOUT	15300
+#define BASE_ADDR		0x564
+#define ADDR_EXTENT		5
+#define CFG_ADDR		(BASE_ADDR + 1)
+#define PET_ADDR		(BASE_ADDR + 2)
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static unsigned timeout;
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default="
+	__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+
+static int ebc_c384_wdt_start(struct watchdog_device *wdev)
+{
+	unsigned t = wdev->timeout;
+
+	/* resolution is in minutes for timeouts greater than 255 seconds */
+	if (t > 255)
+		t = DIV_ROUND_UP(t, 60);
+
+	outb(t, PET_ADDR);
+
+	return 0;
+}
+
+static int ebc_c384_wdt_stop(struct watchdog_device *wdev)
+{
+	outb(0x00, PET_ADDR);
+
+	return 0;
+}
+
+static int ebc_c384_wdt_set_timeout(struct watchdog_device *wdev, unsigned t)
+{
+	/* resolution is in minutes for timeouts greater than 255 seconds */
+	if (t > 255) {
+		/* round second resolution up to minute granularity */
+		wdev->timeout = roundup(t, 60);
+
+		/* set watchdog timer for minutes */
+		outb(0x00, CFG_ADDR);
+	} else {
+		wdev->timeout = t;
+
+		/* set watchdog timer for seconds */
+		outb(0x80, CFG_ADDR);
+	}
+
+	return 0;
+}
+
+static const struct watchdog_ops ebc_c384_wdt_ops = {
+	.start = ebc_c384_wdt_start,
+	.stop = ebc_c384_wdt_stop,
+	.set_timeout = ebc_c384_wdt_set_timeout
+};
+
+static const struct watchdog_info ebc_c384_wdt_info = {
+	.options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT,
+	.identity = MODULE_NAME
+};
+
+static int ebc_c384_wdt_probe(struct device *dev, unsigned int id)
+{
+	struct watchdog_device *wdd;
+
+	if (!devm_request_region(dev, BASE_ADDR, ADDR_EXTENT, dev_name(dev))) {
+		dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
+			BASE_ADDR, BASE_ADDR + ADDR_EXTENT);
+		return -EBUSY;
+	}
+
+	wdd = devm_kzalloc(dev, sizeof(*wdd), GFP_KERNEL);
+	if (!wdd)
+		return -ENOMEM;
+
+	wdd->info = &ebc_c384_wdt_info;
+	wdd->ops = &ebc_c384_wdt_ops;
+	wdd->timeout = WATCHDOG_TIMEOUT;
+	wdd->min_timeout = 1;
+	wdd->max_timeout = WATCHDOG_MAX_TIMEOUT;
+
+	watchdog_set_nowayout(wdd, nowayout);
+
+	if (watchdog_init_timeout(wdd, timeout, dev))
+		dev_warn(dev, "Invalid timeout (%u seconds), using default (%u seconds)\n",
+			timeout, WATCHDOG_TIMEOUT);
+
+	return devm_watchdog_register_device(dev, wdd);
+}
+
+static struct isa_driver ebc_c384_wdt_driver = {
+	.probe = ebc_c384_wdt_probe,
+	.driver = {
+		.name = MODULE_NAME
+	},
+};
+
+static int __init ebc_c384_wdt_init(void)
+{
+	if (!dmi_match(DMI_BOARD_NAME, "EBC-C384 SBC"))
+		return -ENODEV;
+
+	return isa_register_driver(&ebc_c384_wdt_driver, 1);
+}
+
+static void __exit ebc_c384_wdt_exit(void)
+{
+	isa_unregister_driver(&ebc_c384_wdt_driver);
+}
+
+module_init(ebc_c384_wdt_init);
+module_exit(ebc_c384_wdt_exit);
+
+MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
+MODULE_DESCRIPTION("WinSystems EBC-C384 watchdog timer driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("isa:" MODULE_NAME);
diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c
new file mode 100644
index 000000000..f9b14e6ef
--- /dev/null
+++ b/drivers/watchdog/ep93xx_wdt.c
@@ -0,0 +1,147 @@
+/*
+ * Watchdog driver for Cirrus Logic EP93xx family of devices.
+ *
+ * Copyright (c) 2004 Ray Lehtiniemi
+ * Copyright (c) 2006 Tower Technologies
+ * Based on ep93xx driver, bits from alim7101_wdt.c
+ *
+ * Authors: Ray Lehtiniemi <rayl@mail.com>,
+ *	Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * Copyright (c) 2012 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *	Convert to a platform device and use the watchdog framework API
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This watchdog fires after 250msec, which is a too short interval
+ * for us to rely on the user space daemon alone. So we ping the
+ * wdt each ~200msec and eventually stop doing it if the user space
+ * daemon dies.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <linux/io.h>
+
+/* default timeout (secs) */
+#define WDT_TIMEOUT 30
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
+
+static unsigned int timeout;
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds.");
+
+#define EP93XX_WATCHDOG		0x00
+#define EP93XX_WDSTATUS		0x04
+
+struct ep93xx_wdt_priv {
+	void __iomem *mmio;
+	struct watchdog_device wdd;
+};
+
+static int ep93xx_wdt_start(struct watchdog_device *wdd)
+{
+	struct ep93xx_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+	writel(0xaaaa, priv->mmio + EP93XX_WATCHDOG);
+
+	return 0;
+}
+
+static int ep93xx_wdt_stop(struct watchdog_device *wdd)
+{
+	struct ep93xx_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+	writel(0xaa55, priv->mmio + EP93XX_WATCHDOG);
+
+	return 0;
+}
+
+static int ep93xx_wdt_ping(struct watchdog_device *wdd)
+{
+	struct ep93xx_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+	writel(0x5555, priv->mmio + EP93XX_WATCHDOG);
+
+	return 0;
+}
+
+static const struct watchdog_info ep93xx_wdt_ident = {
+	.options	= WDIOF_CARDRESET |
+			  WDIOF_SETTIMEOUT |
+			  WDIOF_MAGICCLOSE |
+			  WDIOF_KEEPALIVEPING,
+	.identity	= "EP93xx Watchdog",
+};
+
+static const struct watchdog_ops ep93xx_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= ep93xx_wdt_start,
+	.stop		= ep93xx_wdt_stop,
+	.ping		= ep93xx_wdt_ping,
+};
+
+static int ep93xx_wdt_probe(struct platform_device *pdev)
+{
+	struct ep93xx_wdt_priv *priv;
+	struct watchdog_device *wdd;
+	struct resource *res;
+	unsigned long val;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->mmio = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->mmio))
+		return PTR_ERR(priv->mmio);
+
+	val = readl(priv->mmio + EP93XX_WATCHDOG);
+
+	wdd = &priv->wdd;
+	wdd->bootstatus = (val & 0x01) ? WDIOF_CARDRESET : 0;
+	wdd->info = &ep93xx_wdt_ident;
+	wdd->ops = &ep93xx_wdt_ops;
+	wdd->min_timeout = 1;
+	wdd->max_hw_heartbeat_ms = 200;
+	wdd->parent = &pdev->dev;
+
+	watchdog_set_nowayout(wdd, nowayout);
+
+	wdd->timeout = WDT_TIMEOUT;
+	watchdog_init_timeout(wdd, timeout, &pdev->dev);
+
+	watchdog_set_drvdata(wdd, priv);
+
+	ret = devm_watchdog_register_device(&pdev->dev, wdd);
+	if (ret)
+		return ret;
+
+	dev_info(&pdev->dev, "EP93XX watchdog driver %s\n",
+		(val & 0x08) ? " (nCS1 disable detected)" : "");
+
+	return 0;
+}
+
+static struct platform_driver ep93xx_wdt_driver = {
+	.driver		= {
+		.name	= "ep93xx-wdt",
+	},
+	.probe		= ep93xx_wdt_probe,
+};
+
+module_platform_driver(ep93xx_wdt_driver);
+
+MODULE_AUTHOR("Ray Lehtiniemi <rayl@mail.com>");
+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>");
+MODULE_DESCRIPTION("EP93xx Watchdog");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c
new file mode 100644
index 000000000..47f77a6fd
--- /dev/null
+++ b/drivers/watchdog/eurotechwdt.c
@@ -0,0 +1,479 @@
+/*
+ *	Eurotech CPU-1220/1410/1420 on board WDT driver
+ *
+ *	(c) Copyright 2001 Ascensit <support@ascensit.com>
+ *	(c) Copyright 2001 Rodolfo Giometti <giometti@ascensit.com>
+ *	(c) Copyright 2002 Rob Radez <rob@osinvestor.com>
+ *
+ *	Based on wdt.c.
+ *	Original copyright messages:
+ *
+ *	(c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ *	warranty for any of this software. This material is provided
+ *	"AS-IS" and at no charge.
+ *
+ *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>*
+ */
+
+/* Changelog:
+ *
+ * 2001 - Rodolfo Giometti
+ *	Initial release
+ *
+ * 2002/04/25 - Rob Radez
+ *	clean up #includes
+ *	clean up locking
+ *	make __setup param unique
+ *	proper options in watchdog_info
+ *	add WDIOC_GETSTATUS and WDIOC_SETOPTIONS ioctls
+ *	add expect_close support
+ *
+ * 2002.05.30 - Joel Becker <joel.becker@oracle.com>
+ *	Added Matt Domsch's nowayout module option.
+ */
+
+/*
+ *	The eurotech CPU-1220/1410/1420's watchdog is a part
+ *	of the on-board SUPER I/O device SMSC FDC 37B782.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+
+static unsigned long eurwdt_is_open;
+static int eurwdt_timeout;
+static char eur_expect_close;
+static DEFINE_SPINLOCK(eurwdt_lock);
+
+/*
+ * You must set these - there is no sane way to probe for this board.
+ */
+
+static int io = 0x3f0;
+static int irq = 10;
+static char *ev = "int";
+
+#define WDT_TIMEOUT		60                /* 1 minute */
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/*
+ * Some symbolic names
+ */
+
+#define WDT_CTRL_REG		0x30
+#define WDT_OUTPIN_CFG		0xe2
+#define WDT_EVENT_INT		0x00
+#define WDT_EVENT_REBOOT	0x08
+#define WDT_UNIT_SEL		0xf1
+#define WDT_UNIT_SECS		0x80
+#define WDT_TIMEOUT_VAL		0xf2
+#define WDT_TIMER_CFG		0xf3
+
+
+module_param_hw(io, int, ioport, 0);
+MODULE_PARM_DESC(io, "Eurotech WDT io port (default=0x3f0)");
+module_param_hw(irq, int, irq, 0);
+MODULE_PARM_DESC(irq, "Eurotech WDT irq (default=10)");
+module_param(ev, charp, 0);
+MODULE_PARM_DESC(ev, "Eurotech WDT event type (default is `int')");
+
+
+/*
+ * Programming support
+ */
+
+static inline void eurwdt_write_reg(u8 index, u8 data)
+{
+	outb(index, io);
+	outb(data, io+1);
+}
+
+static inline void eurwdt_lock_chip(void)
+{
+	outb(0xaa, io);
+}
+
+static inline void eurwdt_unlock_chip(void)
+{
+	outb(0x55, io);
+	eurwdt_write_reg(0x07, 0x08);	/* set the logical device */
+}
+
+static inline void eurwdt_set_timeout(int timeout)
+{
+	eurwdt_write_reg(WDT_TIMEOUT_VAL, (u8) timeout);
+}
+
+static inline void eurwdt_disable_timer(void)
+{
+	eurwdt_set_timeout(0);
+}
+
+static void eurwdt_activate_timer(void)
+{
+	eurwdt_disable_timer();
+	eurwdt_write_reg(WDT_CTRL_REG, 0x01);	/* activate the WDT */
+	eurwdt_write_reg(WDT_OUTPIN_CFG,
+		!strcmp("int", ev) ? WDT_EVENT_INT : WDT_EVENT_REBOOT);
+
+	/* Setting interrupt line */
+	if (irq == 2 || irq > 15 || irq < 0) {
+		pr_err("invalid irq number\n");
+		irq = 0;	/* if invalid we disable interrupt */
+	}
+	if (irq == 0)
+		pr_info("interrupt disabled\n");
+
+	eurwdt_write_reg(WDT_TIMER_CFG, irq << 4);
+
+	eurwdt_write_reg(WDT_UNIT_SEL, WDT_UNIT_SECS);	/* we use seconds */
+	eurwdt_set_timeout(0);	/* the default timeout */
+}
+
+
+/*
+ * Kernel methods.
+ */
+
+static irqreturn_t eurwdt_interrupt(int irq, void *dev_id)
+{
+	pr_crit("timeout WDT timeout\n");
+
+#ifdef ONLY_TESTING
+	pr_crit("Would Reboot\n");
+#else
+	pr_crit("Initiating system reboot\n");
+	emergency_restart();
+#endif
+	return IRQ_HANDLED;
+}
+
+
+/**
+ * eurwdt_ping:
+ *
+ * Reload counter one with the watchdog timeout.
+ */
+
+static void eurwdt_ping(void)
+{
+	/* Write the watchdog default value */
+	eurwdt_set_timeout(eurwdt_timeout);
+}
+
+/**
+ * eurwdt_write:
+ * @file: file handle to the watchdog
+ * @buf: buffer to write (unused as data does not matter here
+ * @count: count of bytes
+ * @ppos: pointer to the position to write. No seeks allowed
+ *
+ * A write to a watchdog device is defined as a keepalive signal. Any
+ * write of data will do, as we we don't define content meaning.
+ */
+
+static ssize_t eurwdt_write(struct file *file, const char __user *buf,
+size_t count, loff_t *ppos)
+{
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+
+			eur_expect_close = 0;
+
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					eur_expect_close = 42;
+			}
+		}
+		spin_lock(&eurwdt_lock);
+		eurwdt_ping();	/* the default timeout */
+		spin_unlock(&eurwdt_lock);
+	}
+	return count;
+}
+
+/**
+ * eurwdt_ioctl:
+ * @file: file handle to the device
+ * @cmd: watchdog command
+ * @arg: argument pointer
+ *
+ * The watchdog API defines a common set of functions for all watchdogs
+ * according to their available features.
+ */
+
+static long eurwdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static const struct watchdog_info ident = {
+		.options	  = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
+							| WDIOF_MAGICCLOSE,
+		.firmware_version = 1,
+		.identity	  = "WDT Eurotech CPU-1220/1410",
+	};
+
+	int time;
+	int options, retval = -EINVAL;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_SETOPTIONS:
+		if (get_user(options, p))
+			return -EFAULT;
+		spin_lock(&eurwdt_lock);
+		if (options & WDIOS_DISABLECARD) {
+			eurwdt_disable_timer();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			eurwdt_activate_timer();
+			eurwdt_ping();
+			retval = 0;
+		}
+		spin_unlock(&eurwdt_lock);
+		return retval;
+
+	case WDIOC_KEEPALIVE:
+		spin_lock(&eurwdt_lock);
+		eurwdt_ping();
+		spin_unlock(&eurwdt_lock);
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (copy_from_user(&time, p, sizeof(int)))
+			return -EFAULT;
+
+		/* Sanity check */
+		if (time < 0 || time > 255)
+			return -EINVAL;
+
+		spin_lock(&eurwdt_lock);
+		eurwdt_timeout = time;
+		eurwdt_set_timeout(time);
+		spin_unlock(&eurwdt_lock);
+		/* fall through */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(eurwdt_timeout, p);
+
+	default:
+		return -ENOTTY;
+	}
+}
+
+/**
+ * eurwdt_open:
+ * @inode: inode of device
+ * @file: file handle to device
+ *
+ * The misc device has been opened. The watchdog device is single
+ * open and on opening we load the counter.
+ */
+
+static int eurwdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &eurwdt_is_open))
+		return -EBUSY;
+	eurwdt_timeout = WDT_TIMEOUT;	/* initial timeout */
+	/* Activate the WDT */
+	eurwdt_activate_timer();
+	return nonseekable_open(inode, file);
+}
+
+/**
+ * eurwdt_release:
+ * @inode: inode to board
+ * @file: file handle to board
+ *
+ * The watchdog has a configurable API. There is a religious dispute
+ * between people who want their watchdog to be able to shut down and
+ * those who want to be sure if the watchdog manager dies the machine
+ * reboots. In the former case we disable the counters, in the latter
+ * case you have to open it again very soon.
+ */
+
+static int eurwdt_release(struct inode *inode, struct file *file)
+{
+	if (eur_expect_close == 42)
+		eurwdt_disable_timer();
+	else {
+		pr_crit("Unexpected close, not stopping watchdog!\n");
+		eurwdt_ping();
+	}
+	clear_bit(0, &eurwdt_is_open);
+	eur_expect_close = 0;
+	return 0;
+}
+
+/**
+ * eurwdt_notify_sys:
+ * @this: our notifier block
+ * @code: the event being reported
+ * @unused: unused
+ *
+ * Our notifier is called on system shutdowns. We want to turn the card
+ * off at reboot otherwise the machine will reboot again during memory
+ * test or worse yet during the following fsck. This would suck, in fact
+ * trust me - if it happens it does suck.
+ */
+
+static int eurwdt_notify_sys(struct notifier_block *this, unsigned long code,
+	void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		eurwdt_disable_timer();	/* Turn the card off */
+
+	return NOTIFY_DONE;
+}
+
+/*
+ * Kernel Interfaces
+ */
+
+
+static const struct file_operations eurwdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= eurwdt_write,
+	.unlocked_ioctl	= eurwdt_ioctl,
+	.open		= eurwdt_open,
+	.release	= eurwdt_release,
+};
+
+static struct miscdevice eurwdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &eurwdt_fops,
+};
+
+/*
+ * The WDT card needs to learn about soft shutdowns in order to
+ * turn the timebomb registers off.
+ */
+
+static struct notifier_block eurwdt_notifier = {
+	.notifier_call = eurwdt_notify_sys,
+};
+
+/**
+ * cleanup_module:
+ *
+ * Unload the watchdog. You cannot do this with any file handles open.
+ * If your watchdog is set to continue ticking on close and you unload
+ * it, well it keeps ticking. We won't get the interrupt but the board
+ * will not touch PC memory so all is fine. You just have to load a new
+ * module in 60 seconds or reboot.
+ */
+
+static void __exit eurwdt_exit(void)
+{
+	eurwdt_lock_chip();
+
+	misc_deregister(&eurwdt_miscdev);
+
+	unregister_reboot_notifier(&eurwdt_notifier);
+	release_region(io, 2);
+	free_irq(irq, NULL);
+}
+
+/**
+ * eurwdt_init:
+ *
+ * Set up the WDT watchdog board. After grabbing the resources
+ * we require we need also to unlock the device.
+ * The open() function will actually kick the board off.
+ */
+
+static int __init eurwdt_init(void)
+{
+	int ret;
+
+	ret = request_irq(irq, eurwdt_interrupt, 0, "eurwdt", NULL);
+	if (ret) {
+		pr_err("IRQ %d is not free\n", irq);
+		goto out;
+	}
+
+	if (!request_region(io, 2, "eurwdt")) {
+		pr_err("IO %X is not free\n", io);
+		ret = -EBUSY;
+		goto outirq;
+	}
+
+	ret = register_reboot_notifier(&eurwdt_notifier);
+	if (ret) {
+		pr_err("can't register reboot notifier (err=%d)\n", ret);
+		goto outreg;
+	}
+
+	ret = misc_register(&eurwdt_miscdev);
+	if (ret) {
+		pr_err("can't misc_register on minor=%d\n", WATCHDOG_MINOR);
+		goto outreboot;
+	}
+
+	eurwdt_unlock_chip();
+
+	ret = 0;
+	pr_info("Eurotech WDT driver 0.01 at %X (Interrupt %d) - timeout event: %s\n",
+		io, irq, (!strcmp("int", ev) ? "int" : "reboot"));
+
+out:
+	return ret;
+
+outreboot:
+	unregister_reboot_notifier(&eurwdt_notifier);
+
+outreg:
+	release_region(io, 2);
+
+outirq:
+	free_irq(irq, NULL);
+	goto out;
+}
+
+module_init(eurwdt_init);
+module_exit(eurwdt_exit);
+
+MODULE_AUTHOR("Rodolfo Giometti");
+MODULE_DESCRIPTION("Driver for Eurotech CPU-1220/1410 on board watchdog");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c
new file mode 100644
index 000000000..6b751d1aa
--- /dev/null
+++ b/drivers/watchdog/f71808e_wdt.c
@@ -0,0 +1,885 @@
+/***************************************************************************
+ *   Copyright (C) 2006 by Hans Edgington <hans@edgington.nl>              *
+ *   Copyright (C) 2007-2009 Hans de Goede <hdegoede@redhat.com>           *
+ *   Copyright (C) 2010 Giel van Schijndel <me@mortis.eu>                  *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program; if not, write to the                         *
+ *   Free Software Foundation, Inc.,                                       *
+ *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ ***************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+
+#define DRVNAME "f71808e_wdt"
+
+#define SIO_F71808FG_LD_WDT	0x07	/* Watchdog timer logical device */
+#define SIO_UNLOCK_KEY		0x87	/* Key to enable Super-I/O */
+#define SIO_LOCK_KEY		0xAA	/* Key to disable Super-I/O */
+
+#define SIO_REG_LDSEL		0x07	/* Logical device select */
+#define SIO_REG_DEVID		0x20	/* Device ID (2 bytes) */
+#define SIO_REG_DEVREV		0x22	/* Device revision */
+#define SIO_REG_MANID		0x23	/* Fintek ID (2 bytes) */
+#define SIO_REG_ROM_ADDR_SEL	0x27	/* ROM address select */
+#define SIO_F81866_REG_PORT_SEL	0x27	/* F81866 Multi-Function Register */
+#define SIO_REG_MFUNCT1		0x29	/* Multi function select 1 */
+#define SIO_REG_MFUNCT2		0x2a	/* Multi function select 2 */
+#define SIO_REG_MFUNCT3		0x2b	/* Multi function select 3 */
+#define SIO_F81866_REG_GPIO1	0x2c	/* F81866 GPIO1 Enable Register */
+#define SIO_REG_ENABLE		0x30	/* Logical device enable */
+#define SIO_REG_ADDR		0x60	/* Logical device address (2 bytes) */
+
+#define SIO_FINTEK_ID		0x1934	/* Manufacturers ID */
+#define SIO_F71808_ID		0x0901	/* Chipset ID */
+#define SIO_F71858_ID		0x0507	/* Chipset ID */
+#define SIO_F71862_ID		0x0601	/* Chipset ID */
+#define SIO_F71868_ID		0x1106	/* Chipset ID */
+#define SIO_F71869_ID		0x0814	/* Chipset ID */
+#define SIO_F71869A_ID		0x1007	/* Chipset ID */
+#define SIO_F71882_ID		0x0541	/* Chipset ID */
+#define SIO_F71889_ID		0x0723	/* Chipset ID */
+#define SIO_F81865_ID		0x0704	/* Chipset ID */
+#define SIO_F81866_ID		0x1010	/* Chipset ID */
+
+#define F71808FG_REG_WDO_CONF		0xf0
+#define F71808FG_REG_WDT_CONF		0xf5
+#define F71808FG_REG_WD_TIME		0xf6
+
+#define F71808FG_FLAG_WDOUT_EN		7
+
+#define F71808FG_FLAG_WDTMOUT_STS	6
+#define F71808FG_FLAG_WD_EN		5
+#define F71808FG_FLAG_WD_PULSE		4
+#define F71808FG_FLAG_WD_UNIT		3
+
+#define F81865_REG_WDO_CONF		0xfa
+#define F81865_FLAG_WDOUT_EN		0
+
+/* Default values */
+#define WATCHDOG_TIMEOUT	60	/* 1 minute default timeout */
+#define WATCHDOG_MAX_TIMEOUT	(60 * 255)
+#define WATCHDOG_PULSE_WIDTH	125	/* 125 ms, default pulse width for
+					   watchdog signal */
+#define WATCHDOG_F71862FG_PIN	63	/* default watchdog reset output
+					   pin number 63 */
+
+static unsigned short force_id;
+module_param(force_id, ushort, 0);
+MODULE_PARM_DESC(force_id, "Override the detected device ID");
+
+static const int max_timeout = WATCHDOG_MAX_TIMEOUT;
+static int timeout = WATCHDOG_TIMEOUT;	/* default timeout in seconds */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. 1<= timeout <="
+			__MODULE_STRING(WATCHDOG_MAX_TIMEOUT) " (default="
+			__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+
+static unsigned int pulse_width = WATCHDOG_PULSE_WIDTH;
+module_param(pulse_width, uint, 0);
+MODULE_PARM_DESC(pulse_width,
+	"Watchdog signal pulse width. 0(=level), 1, 25, 30, 125, 150, 5000 or 6000 ms"
+			" (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")");
+
+static unsigned int f71862fg_pin = WATCHDOG_F71862FG_PIN;
+module_param(f71862fg_pin, uint, 0);
+MODULE_PARM_DESC(f71862fg_pin,
+	"Watchdog f71862fg reset output pin configuration. Choose pin 56 or 63"
+			" (default=" __MODULE_STRING(WATCHDOG_F71862FG_PIN)")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0444);
+MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
+
+static unsigned int start_withtimeout;
+module_param(start_withtimeout, uint, 0);
+MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with"
+	" given initial timeout. Zero (default) disables this feature.");
+
+enum chips { f71808fg, f71858fg, f71862fg, f71868, f71869, f71882fg, f71889fg,
+	     f81865, f81866};
+
+static const char *f71808e_names[] = {
+	"f71808fg",
+	"f71858fg",
+	"f71862fg",
+	"f71868",
+	"f71869",
+	"f71882fg",
+	"f71889fg",
+	"f81865",
+	"f81866",
+};
+
+/* Super-I/O Function prototypes */
+static inline int superio_inb(int base, int reg);
+static inline int superio_inw(int base, int reg);
+static inline void superio_outb(int base, int reg, u8 val);
+static inline void superio_set_bit(int base, int reg, int bit);
+static inline void superio_clear_bit(int base, int reg, int bit);
+static inline int superio_enter(int base);
+static inline void superio_select(int base, int ld);
+static inline void superio_exit(int base);
+
+struct watchdog_data {
+	unsigned short	sioaddr;
+	enum chips	type;
+	unsigned long	opened;
+	struct mutex	lock;
+	char		expect_close;
+	struct watchdog_info ident;
+
+	unsigned short	timeout;
+	u8		timer_val;	/* content for the wd_time register */
+	char		minutes_mode;
+	u8		pulse_val;	/* pulse width flag */
+	char		pulse_mode;	/* enable pulse output mode? */
+	char		caused_reboot;	/* last reboot was by the watchdog */
+};
+
+static struct watchdog_data watchdog = {
+	.lock = __MUTEX_INITIALIZER(watchdog.lock),
+};
+
+/* Super I/O functions */
+static inline int superio_inb(int base, int reg)
+{
+	outb(reg, base);
+	return inb(base + 1);
+}
+
+static int superio_inw(int base, int reg)
+{
+	int val;
+	val  = superio_inb(base, reg) << 8;
+	val |= superio_inb(base, reg + 1);
+	return val;
+}
+
+static inline void superio_outb(int base, int reg, u8 val)
+{
+	outb(reg, base);
+	outb(val, base + 1);
+}
+
+static inline void superio_set_bit(int base, int reg, int bit)
+{
+	unsigned long val = superio_inb(base, reg);
+	__set_bit(bit, &val);
+	superio_outb(base, reg, val);
+}
+
+static inline void superio_clear_bit(int base, int reg, int bit)
+{
+	unsigned long val = superio_inb(base, reg);
+	__clear_bit(bit, &val);
+	superio_outb(base, reg, val);
+}
+
+static inline int superio_enter(int base)
+{
+	/* Don't step on other drivers' I/O space by accident */
+	if (!request_muxed_region(base, 2, DRVNAME)) {
+		pr_err("I/O address 0x%04x already in use\n", (int)base);
+		return -EBUSY;
+	}
+
+	/* according to the datasheet the key must be sent twice! */
+	outb(SIO_UNLOCK_KEY, base);
+	outb(SIO_UNLOCK_KEY, base);
+
+	return 0;
+}
+
+static inline void superio_select(int base, int ld)
+{
+	outb(SIO_REG_LDSEL, base);
+	outb(ld, base + 1);
+}
+
+static inline void superio_exit(int base)
+{
+	outb(SIO_LOCK_KEY, base);
+	release_region(base, 2);
+}
+
+static int watchdog_set_timeout(int timeout)
+{
+	if (timeout <= 0
+	 || timeout >  max_timeout) {
+		pr_err("watchdog timeout out of range\n");
+		return -EINVAL;
+	}
+
+	mutex_lock(&watchdog.lock);
+
+	if (timeout > 0xff) {
+		watchdog.timer_val = DIV_ROUND_UP(timeout, 60);
+		watchdog.minutes_mode = true;
+		timeout = watchdog.timer_val * 60;
+	} else {
+		watchdog.timer_val = timeout;
+		watchdog.minutes_mode = false;
+	}
+
+	watchdog.timeout = timeout;
+
+	mutex_unlock(&watchdog.lock);
+
+	return 0;
+}
+
+static int watchdog_set_pulse_width(unsigned int pw)
+{
+	int err = 0;
+	unsigned int t1 = 25, t2 = 125, t3 = 5000;
+
+	if (watchdog.type == f71868) {
+		t1 = 30;
+		t2 = 150;
+		t3 = 6000;
+	}
+
+	mutex_lock(&watchdog.lock);
+
+	if        (pw <=  1) {
+		watchdog.pulse_val = 0;
+	} else if (pw <= t1) {
+		watchdog.pulse_val = 1;
+	} else if (pw <= t2) {
+		watchdog.pulse_val = 2;
+	} else if (pw <= t3) {
+		watchdog.pulse_val = 3;
+	} else {
+		pr_err("pulse width out of range\n");
+		err = -EINVAL;
+		goto exit_unlock;
+	}
+
+	watchdog.pulse_mode = pw;
+
+exit_unlock:
+	mutex_unlock(&watchdog.lock);
+	return err;
+}
+
+static int watchdog_keepalive(void)
+{
+	int err = 0;
+
+	mutex_lock(&watchdog.lock);
+	err = superio_enter(watchdog.sioaddr);
+	if (err)
+		goto exit_unlock;
+	superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+
+	if (watchdog.minutes_mode)
+		/* select minutes for timer units */
+		superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+				F71808FG_FLAG_WD_UNIT);
+	else
+		/* select seconds for timer units */
+		superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+				F71808FG_FLAG_WD_UNIT);
+
+	/* Set timer value */
+	superio_outb(watchdog.sioaddr, F71808FG_REG_WD_TIME,
+			   watchdog.timer_val);
+
+	superio_exit(watchdog.sioaddr);
+
+exit_unlock:
+	mutex_unlock(&watchdog.lock);
+	return err;
+}
+
+static int f71862fg_pin_configure(unsigned short ioaddr)
+{
+	/* When ioaddr is non-zero the calling function has to take care of
+	   mutex handling and superio preparation! */
+
+	if (f71862fg_pin == 63) {
+		if (ioaddr) {
+			/* SPI must be disabled first to use this pin! */
+			superio_clear_bit(ioaddr, SIO_REG_ROM_ADDR_SEL, 6);
+			superio_set_bit(ioaddr, SIO_REG_MFUNCT3, 4);
+		}
+	} else if (f71862fg_pin == 56) {
+		if (ioaddr)
+			superio_set_bit(ioaddr, SIO_REG_MFUNCT1, 1);
+	} else {
+		pr_err("Invalid argument f71862fg_pin=%d\n", f71862fg_pin);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int watchdog_start(void)
+{
+	/* Make sure we don't die as soon as the watchdog is enabled below */
+	int err = watchdog_keepalive();
+	if (err)
+		return err;
+
+	mutex_lock(&watchdog.lock);
+	err = superio_enter(watchdog.sioaddr);
+	if (err)
+		goto exit_unlock;
+	superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+
+	/* Watchdog pin configuration */
+	switch (watchdog.type) {
+	case f71808fg:
+		/* Set pin 21 to GPIO23/WDTRST#, then to WDTRST# */
+		superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT2, 3);
+		superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT3, 3);
+		break;
+
+	case f71862fg:
+		err = f71862fg_pin_configure(watchdog.sioaddr);
+		if (err)
+			goto exit_superio;
+		break;
+
+	case f71868:
+	case f71869:
+		/* GPIO14 --> WDTRST# */
+		superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT1, 4);
+		break;
+
+	case f71882fg:
+		/* Set pin 56 to WDTRST# */
+		superio_set_bit(watchdog.sioaddr, SIO_REG_MFUNCT1, 1);
+		break;
+
+	case f71889fg:
+		/* set pin 40 to WDTRST# */
+		superio_outb(watchdog.sioaddr, SIO_REG_MFUNCT3,
+			superio_inb(watchdog.sioaddr, SIO_REG_MFUNCT3) & 0xcf);
+		break;
+
+	case f81865:
+		/* Set pin 70 to WDTRST# */
+		superio_clear_bit(watchdog.sioaddr, SIO_REG_MFUNCT3, 5);
+		break;
+
+	case f81866:
+		/* Set pin 70 to WDTRST# */
+		superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL,
+				  BIT(3) | BIT(0));
+		superio_set_bit(watchdog.sioaddr, SIO_F81866_REG_PORT_SEL,
+				BIT(2));
+		/*
+		 * GPIO1 Control Register when 27h BIT3:2 = 01 & BIT0 = 0.
+		 * The PIN 70(GPIO15/WDTRST) is controlled by 2Ch:
+		 *     BIT5: 0 -> WDTRST#
+		 *           1 -> GPIO15
+		 */
+		superio_clear_bit(watchdog.sioaddr, SIO_F81866_REG_GPIO1,
+				  BIT(5));
+		break;
+
+	default:
+		/*
+		 * 'default' label to shut up the compiler and catch
+		 * programmer errors
+		 */
+		err = -ENODEV;
+		goto exit_superio;
+	}
+
+	superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+	superio_set_bit(watchdog.sioaddr, SIO_REG_ENABLE, 0);
+
+	if (watchdog.type == f81865 || watchdog.type == f81866)
+		superio_set_bit(watchdog.sioaddr, F81865_REG_WDO_CONF,
+				F81865_FLAG_WDOUT_EN);
+	else
+		superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDO_CONF,
+				F71808FG_FLAG_WDOUT_EN);
+
+	superio_set_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+			F71808FG_FLAG_WD_EN);
+
+	if (watchdog.pulse_mode) {
+		/* Select "pulse" output mode with given duration */
+		u8 wdt_conf = superio_inb(watchdog.sioaddr,
+				F71808FG_REG_WDT_CONF);
+
+		/* Set WD_PSWIDTH bits (1:0) */
+		wdt_conf = (wdt_conf & 0xfc) | (watchdog.pulse_val & 0x03);
+		/* Set WD_PULSE to "pulse" mode */
+		wdt_conf |= BIT(F71808FG_FLAG_WD_PULSE);
+
+		superio_outb(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+				wdt_conf);
+	} else {
+		/* Select "level" output mode */
+		superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+				F71808FG_FLAG_WD_PULSE);
+	}
+
+exit_superio:
+	superio_exit(watchdog.sioaddr);
+exit_unlock:
+	mutex_unlock(&watchdog.lock);
+
+	return err;
+}
+
+static int watchdog_stop(void)
+{
+	int err = 0;
+
+	mutex_lock(&watchdog.lock);
+	err = superio_enter(watchdog.sioaddr);
+	if (err)
+		goto exit_unlock;
+	superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+
+	superio_clear_bit(watchdog.sioaddr, F71808FG_REG_WDT_CONF,
+			F71808FG_FLAG_WD_EN);
+
+	superio_exit(watchdog.sioaddr);
+
+exit_unlock:
+	mutex_unlock(&watchdog.lock);
+
+	return err;
+}
+
+static int watchdog_get_status(void)
+{
+	int status = 0;
+
+	mutex_lock(&watchdog.lock);
+	status = (watchdog.caused_reboot) ? WDIOF_CARDRESET : 0;
+	mutex_unlock(&watchdog.lock);
+
+	return status;
+}
+
+static bool watchdog_is_running(void)
+{
+	/*
+	 * if we fail to determine the watchdog's status assume it to be
+	 * running to be on the safe side
+	 */
+	bool is_running = true;
+
+	mutex_lock(&watchdog.lock);
+	if (superio_enter(watchdog.sioaddr))
+		goto exit_unlock;
+	superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+
+	is_running = (superio_inb(watchdog.sioaddr, SIO_REG_ENABLE) & BIT(0))
+		&& (superio_inb(watchdog.sioaddr, F71808FG_REG_WDT_CONF)
+			& BIT(F71808FG_FLAG_WD_EN));
+
+	superio_exit(watchdog.sioaddr);
+
+exit_unlock:
+	mutex_unlock(&watchdog.lock);
+	return is_running;
+}
+
+/* /dev/watchdog api */
+
+static int watchdog_open(struct inode *inode, struct file *file)
+{
+	int err;
+
+	/* If the watchdog is alive we don't need to start it again */
+	if (test_and_set_bit(0, &watchdog.opened))
+		return -EBUSY;
+
+	err = watchdog_start();
+	if (err) {
+		clear_bit(0, &watchdog.opened);
+		return err;
+	}
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	watchdog.expect_close = 0;
+	return nonseekable_open(inode, file);
+}
+
+static int watchdog_release(struct inode *inode, struct file *file)
+{
+	clear_bit(0, &watchdog.opened);
+
+	if (!watchdog.expect_close) {
+		watchdog_keepalive();
+		pr_crit("Unexpected close, not stopping watchdog!\n");
+	} else if (!nowayout) {
+		watchdog_stop();
+	}
+	return 0;
+}
+
+/*
+ *      watchdog_write:
+ *      @file: file handle to the watchdog
+ *      @buf: buffer to write
+ *      @count: count of bytes
+ *      @ppos: pointer to the position to write. No seeks allowed
+ *
+ *      A write to a watchdog device is defined as a keepalive signal. Any
+ *      write of data will do, as we we don't define content meaning.
+ */
+
+static ssize_t watchdog_write(struct file *file, const char __user *buf,
+			    size_t count, loff_t *ppos)
+{
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			bool expect_close = false;
+
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = true;
+			}
+
+			/* Properly order writes across fork()ed processes */
+			mutex_lock(&watchdog.lock);
+			watchdog.expect_close = expect_close;
+			mutex_unlock(&watchdog.lock);
+		}
+
+		/* someone wrote to us, we should restart timer */
+		watchdog_keepalive();
+	}
+	return count;
+}
+
+/*
+ *      watchdog_ioctl:
+ *      @inode: inode of the device
+ *      @file: file handle to the device
+ *      @cmd: watchdog command
+ *      @arg: argument pointer
+ *
+ *      The watchdog API defines a common set of functions for all watchdogs
+ *      according to their available features.
+ */
+static long watchdog_ioctl(struct file *file, unsigned int cmd,
+	unsigned long arg)
+{
+	int status;
+	int new_options;
+	int new_timeout;
+	union {
+		struct watchdog_info __user *ident;
+		int __user *i;
+	} uarg;
+
+	uarg.i = (int __user *)arg;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(uarg.ident, &watchdog.ident,
+			sizeof(watchdog.ident)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+		status = watchdog_get_status();
+		if (status < 0)
+			return status;
+		return put_user(status, uarg.i);
+
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, uarg.i);
+
+	case WDIOC_SETOPTIONS:
+		if (get_user(new_options, uarg.i))
+			return -EFAULT;
+
+		if (new_options & WDIOS_DISABLECARD)
+			watchdog_stop();
+
+		if (new_options & WDIOS_ENABLECARD)
+			return watchdog_start();
+		/* fall through */
+
+	case WDIOC_KEEPALIVE:
+		watchdog_keepalive();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, uarg.i))
+			return -EFAULT;
+
+		if (watchdog_set_timeout(new_timeout))
+			return -EINVAL;
+
+		watchdog_keepalive();
+		/* fall through */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(watchdog.timeout, uarg.i);
+
+	default:
+		return -ENOTTY;
+
+	}
+}
+
+static int watchdog_notify_sys(struct notifier_block *this, unsigned long code,
+	void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		watchdog_stop();
+	return NOTIFY_DONE;
+}
+
+static const struct file_operations watchdog_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.open		= watchdog_open,
+	.release	= watchdog_release,
+	.write		= watchdog_write,
+	.unlocked_ioctl	= watchdog_ioctl,
+};
+
+static struct miscdevice watchdog_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &watchdog_fops,
+};
+
+static struct notifier_block watchdog_notifier = {
+	.notifier_call = watchdog_notify_sys,
+};
+
+static int __init watchdog_init(int sioaddr)
+{
+	int wdt_conf, err = 0;
+
+	/* No need to lock watchdog.lock here because no entry points
+	 * into the module have been registered yet.
+	 */
+	watchdog.sioaddr = sioaddr;
+	watchdog.ident.options = WDIOF_MAGICCLOSE
+				| WDIOF_KEEPALIVEPING
+				| WDIOF_CARDRESET;
+
+	snprintf(watchdog.ident.identity,
+		sizeof(watchdog.ident.identity), "%s watchdog",
+		f71808e_names[watchdog.type]);
+
+	err = superio_enter(sioaddr);
+	if (err)
+		return err;
+	superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+
+	wdt_conf = superio_inb(sioaddr, F71808FG_REG_WDT_CONF);
+	watchdog.caused_reboot = wdt_conf & BIT(F71808FG_FLAG_WDTMOUT_STS);
+
+	/*
+	 * We don't want WDTMOUT_STS to stick around till regular reboot.
+	 * Write 1 to the bit to clear it to zero.
+	 */
+	superio_outb(sioaddr, F71808FG_REG_WDT_CONF,
+		     wdt_conf | BIT(F71808FG_FLAG_WDTMOUT_STS));
+
+	superio_exit(sioaddr);
+
+	err = watchdog_set_timeout(timeout);
+	if (err)
+		return err;
+	err = watchdog_set_pulse_width(pulse_width);
+	if (err)
+		return err;
+
+	err = register_reboot_notifier(&watchdog_notifier);
+	if (err)
+		return err;
+
+	err = misc_register(&watchdog_miscdev);
+	if (err) {
+		pr_err("cannot register miscdev on minor=%d\n",
+		       watchdog_miscdev.minor);
+		goto exit_reboot;
+	}
+
+	if (start_withtimeout) {
+		if (start_withtimeout <= 0
+		 || start_withtimeout >  max_timeout) {
+			pr_err("starting timeout out of range\n");
+			err = -EINVAL;
+			goto exit_miscdev;
+		}
+
+		err = watchdog_start();
+		if (err) {
+			pr_err("cannot start watchdog timer\n");
+			goto exit_miscdev;
+		}
+
+		mutex_lock(&watchdog.lock);
+		err = superio_enter(sioaddr);
+		if (err)
+			goto exit_unlock;
+		superio_select(watchdog.sioaddr, SIO_F71808FG_LD_WDT);
+
+		if (start_withtimeout > 0xff) {
+			/* select minutes for timer units */
+			superio_set_bit(sioaddr, F71808FG_REG_WDT_CONF,
+				F71808FG_FLAG_WD_UNIT);
+			superio_outb(sioaddr, F71808FG_REG_WD_TIME,
+				DIV_ROUND_UP(start_withtimeout, 60));
+		} else {
+			/* select seconds for timer units */
+			superio_clear_bit(sioaddr, F71808FG_REG_WDT_CONF,
+				F71808FG_FLAG_WD_UNIT);
+			superio_outb(sioaddr, F71808FG_REG_WD_TIME,
+				start_withtimeout);
+		}
+
+		superio_exit(sioaddr);
+		mutex_unlock(&watchdog.lock);
+
+		if (nowayout)
+			__module_get(THIS_MODULE);
+
+		pr_info("watchdog started with initial timeout of %u sec\n",
+			start_withtimeout);
+	}
+
+	return 0;
+
+exit_unlock:
+	mutex_unlock(&watchdog.lock);
+exit_miscdev:
+	misc_deregister(&watchdog_miscdev);
+exit_reboot:
+	unregister_reboot_notifier(&watchdog_notifier);
+
+	return err;
+}
+
+static int __init f71808e_find(int sioaddr)
+{
+	u16 devid;
+	int err = superio_enter(sioaddr);
+	if (err)
+		return err;
+
+	devid = superio_inw(sioaddr, SIO_REG_MANID);
+	if (devid != SIO_FINTEK_ID) {
+		pr_debug("Not a Fintek device\n");
+		err = -ENODEV;
+		goto exit;
+	}
+
+	devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID);
+	switch (devid) {
+	case SIO_F71808_ID:
+		watchdog.type = f71808fg;
+		break;
+	case SIO_F71862_ID:
+		watchdog.type = f71862fg;
+		err = f71862fg_pin_configure(0); /* validate module parameter */
+		break;
+	case SIO_F71868_ID:
+		watchdog.type = f71868;
+		break;
+	case SIO_F71869_ID:
+	case SIO_F71869A_ID:
+		watchdog.type = f71869;
+		break;
+	case SIO_F71882_ID:
+		watchdog.type = f71882fg;
+		break;
+	case SIO_F71889_ID:
+		watchdog.type = f71889fg;
+		break;
+	case SIO_F71858_ID:
+		/* Confirmed (by datasheet) not to have a watchdog. */
+		err = -ENODEV;
+		goto exit;
+	case SIO_F81865_ID:
+		watchdog.type = f81865;
+		break;
+	case SIO_F81866_ID:
+		watchdog.type = f81866;
+		break;
+	default:
+		pr_info("Unrecognized Fintek device: %04x\n",
+			(unsigned int)devid);
+		err = -ENODEV;
+		goto exit;
+	}
+
+	pr_info("Found %s watchdog chip, revision %d\n",
+		f71808e_names[watchdog.type],
+		(int)superio_inb(sioaddr, SIO_REG_DEVREV));
+exit:
+	superio_exit(sioaddr);
+	return err;
+}
+
+static int __init f71808e_init(void)
+{
+	static const unsigned short addrs[] = { 0x2e, 0x4e };
+	int err = -ENODEV;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(addrs); i++) {
+		err = f71808e_find(addrs[i]);
+		if (err == 0)
+			break;
+	}
+	if (i == ARRAY_SIZE(addrs))
+		return err;
+
+	return watchdog_init(addrs[i]);
+}
+
+static void __exit f71808e_exit(void)
+{
+	if (watchdog_is_running()) {
+		pr_warn("Watchdog timer still running, stopping it\n");
+		watchdog_stop();
+	}
+	misc_deregister(&watchdog_miscdev);
+	unregister_reboot_notifier(&watchdog_notifier);
+}
+
+MODULE_DESCRIPTION("F71808E Watchdog Driver");
+MODULE_AUTHOR("Giel van Schijndel <me@mortis.eu>");
+MODULE_LICENSE("GPL");
+
+module_init(f71808e_init);
+module_exit(f71808e_exit);
diff --git a/drivers/watchdog/ftwdt010_wdt.c b/drivers/watchdog/ftwdt010_wdt.c
new file mode 100644
index 000000000..a9c2912ee
--- /dev/null
+++ b/drivers/watchdog/ftwdt010_wdt.c
@@ -0,0 +1,236 @@
+/*
+ * Watchdog driver for Faraday Technology FTWDT010
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Inspired by the out-of-tree drivers from OpenWRT:
+ * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/watchdog.h>
+
+#define FTWDT010_WDCOUNTER	0x0
+#define FTWDT010_WDLOAD		0x4
+#define FTWDT010_WDRESTART	0x8
+#define FTWDT010_WDCR		0xC
+
+#define WDRESTART_MAGIC		0x5AB9
+
+#define WDCR_CLOCK_5MHZ		BIT(4)
+#define WDCR_WDEXT		BIT(3)
+#define WDCR_WDINTR		BIT(2)
+#define WDCR_SYS_RST		BIT(1)
+#define WDCR_ENABLE		BIT(0)
+
+#define WDT_CLOCK		5000000		/* 5 MHz */
+
+struct ftwdt010_wdt {
+	struct watchdog_device	wdd;
+	struct device		*dev;
+	void __iomem		*base;
+	bool			has_irq;
+};
+
+static inline
+struct ftwdt010_wdt *to_ftwdt010_wdt(struct watchdog_device *wdd)
+{
+	return container_of(wdd, struct ftwdt010_wdt, wdd);
+}
+
+static int ftwdt010_wdt_start(struct watchdog_device *wdd)
+{
+	struct ftwdt010_wdt *gwdt = to_ftwdt010_wdt(wdd);
+	u32 enable;
+
+	writel(wdd->timeout * WDT_CLOCK, gwdt->base + FTWDT010_WDLOAD);
+	writel(WDRESTART_MAGIC, gwdt->base + FTWDT010_WDRESTART);
+	/* set clock before enabling */
+	enable = WDCR_CLOCK_5MHZ | WDCR_SYS_RST;
+	writel(enable, gwdt->base + FTWDT010_WDCR);
+	if (gwdt->has_irq)
+		enable |= WDCR_WDINTR;
+	enable |= WDCR_ENABLE;
+	writel(enable, gwdt->base + FTWDT010_WDCR);
+
+	return 0;
+}
+
+static int ftwdt010_wdt_stop(struct watchdog_device *wdd)
+{
+	struct ftwdt010_wdt *gwdt = to_ftwdt010_wdt(wdd);
+
+	writel(0, gwdt->base + FTWDT010_WDCR);
+
+	return 0;
+}
+
+static int ftwdt010_wdt_ping(struct watchdog_device *wdd)
+{
+	struct ftwdt010_wdt *gwdt = to_ftwdt010_wdt(wdd);
+
+	writel(WDRESTART_MAGIC, gwdt->base + FTWDT010_WDRESTART);
+
+	return 0;
+}
+
+static int ftwdt010_wdt_set_timeout(struct watchdog_device *wdd,
+				  unsigned int timeout)
+{
+	wdd->timeout = timeout;
+	if (watchdog_active(wdd))
+		ftwdt010_wdt_start(wdd);
+
+	return 0;
+}
+
+static irqreturn_t ftwdt010_wdt_interrupt(int irq, void *data)
+{
+	struct ftwdt010_wdt *gwdt = data;
+
+	watchdog_notify_pretimeout(&gwdt->wdd);
+
+	return IRQ_HANDLED;
+}
+
+static const struct watchdog_ops ftwdt010_wdt_ops = {
+	.start		= ftwdt010_wdt_start,
+	.stop		= ftwdt010_wdt_stop,
+	.ping		= ftwdt010_wdt_ping,
+	.set_timeout	= ftwdt010_wdt_set_timeout,
+	.owner		= THIS_MODULE,
+};
+
+static const struct watchdog_info ftwdt010_wdt_info = {
+	.options	= WDIOF_KEEPALIVEPING
+			| WDIOF_MAGICCLOSE
+			| WDIOF_SETTIMEOUT,
+	.identity	= KBUILD_MODNAME,
+};
+
+
+static int ftwdt010_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct ftwdt010_wdt *gwdt;
+	unsigned int reg;
+	int irq;
+	int ret;
+
+	gwdt = devm_kzalloc(dev, sizeof(*gwdt), GFP_KERNEL);
+	if (!gwdt)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	gwdt->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(gwdt->base))
+		return PTR_ERR(gwdt->base);
+
+	gwdt->dev = dev;
+	gwdt->wdd.info = &ftwdt010_wdt_info;
+	gwdt->wdd.ops = &ftwdt010_wdt_ops;
+	gwdt->wdd.min_timeout = 1;
+	gwdt->wdd.max_timeout = 0xFFFFFFFF / WDT_CLOCK;
+	gwdt->wdd.parent = dev;
+
+	/*
+	 * If 'timeout-sec' unspecified in devicetree, assume a 13 second
+	 * default.
+	 */
+	gwdt->wdd.timeout = 13U;
+	watchdog_init_timeout(&gwdt->wdd, 0, dev);
+
+	reg = readw(gwdt->base + FTWDT010_WDCR);
+	if (reg & WDCR_ENABLE) {
+		/* Watchdog was enabled by the bootloader, disable it. */
+		reg &= ~WDCR_ENABLE;
+		writel(reg, gwdt->base + FTWDT010_WDCR);
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq) {
+		ret = devm_request_irq(dev, irq, ftwdt010_wdt_interrupt, 0,
+				       "watchdog bark", gwdt);
+		if (ret)
+			return ret;
+		gwdt->has_irq = true;
+	}
+
+	ret = devm_watchdog_register_device(dev, &gwdt->wdd);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register watchdog\n");
+		return ret;
+	}
+
+	/* Set up platform driver data */
+	platform_set_drvdata(pdev, gwdt);
+	dev_info(dev, "FTWDT010 watchdog driver enabled\n");
+
+	return 0;
+}
+
+static int __maybe_unused ftwdt010_wdt_suspend(struct device *dev)
+{
+	struct ftwdt010_wdt *gwdt = dev_get_drvdata(dev);
+	unsigned int reg;
+
+	reg = readw(gwdt->base + FTWDT010_WDCR);
+	reg &= ~WDCR_ENABLE;
+	writel(reg, gwdt->base + FTWDT010_WDCR);
+
+	return 0;
+}
+
+static int __maybe_unused ftwdt010_wdt_resume(struct device *dev)
+{
+	struct ftwdt010_wdt *gwdt = dev_get_drvdata(dev);
+	unsigned int reg;
+
+	if (watchdog_active(&gwdt->wdd)) {
+		reg = readw(gwdt->base + FTWDT010_WDCR);
+		reg |= WDCR_ENABLE;
+		writel(reg, gwdt->base + FTWDT010_WDCR);
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops ftwdt010_wdt_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(ftwdt010_wdt_suspend,
+				ftwdt010_wdt_resume)
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id ftwdt010_wdt_match[] = {
+	{ .compatible = "faraday,ftwdt010" },
+	{ .compatible = "cortina,gemini-watchdog" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ftwdt010_wdt_match);
+#endif
+
+static struct platform_driver ftwdt010_wdt_driver = {
+	.probe		= ftwdt010_wdt_probe,
+	.driver		= {
+		.name	= "ftwdt010-wdt",
+		.of_match_table = of_match_ptr(ftwdt010_wdt_match),
+		.pm = &ftwdt010_wdt_dev_pm_ops,
+	},
+};
+module_platform_driver(ftwdt010_wdt_driver);
+MODULE_AUTHOR("Linus Walleij");
+MODULE_DESCRIPTION("Watchdog driver for Faraday Technology FTWDT010");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
new file mode 100644
index 000000000..006e23480
--- /dev/null
+++ b/drivers/watchdog/gef_wdt.c
@@ -0,0 +1,334 @@
+/*
+ * GE watchdog userspace interface
+ *
+ * Author:  Martyn Welch <martyn.welch@ge.com>
+ *
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: mv64x60_wdt.c (MV64X60 watchdog userspace interface)
+ *   Author: James Chapman <jchapman@katalix.com>
+ */
+
+/* TODO:
+ * This driver does not provide support for the hardwares capability of sending
+ * an interrupt at a programmable threshold.
+ *
+ * This driver currently can only support 1 watchdog - there are 2 in the
+ * hardware that this driver supports. Thus one could be configured as a
+ * process-based watchdog (via /dev/watchdog), the second (using the interrupt
+ * capabilities) a kernel-based watchdog.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <sysdev/fsl_soc.h>
+
+/*
+ * The watchdog configuration register contains a pair of 2-bit fields,
+ *   1.  a reload field, bits 27-26, which triggers a reload of
+ *       the countdown register, and
+ *   2.  an enable field, bits 25-24, which toggles between
+ *       enabling and disabling the watchdog timer.
+ * Bit 31 is a read-only field which indicates whether the
+ * watchdog timer is currently enabled.
+ *
+ * The low 24 bits contain the timer reload value.
+ */
+#define GEF_WDC_ENABLE_SHIFT	24
+#define GEF_WDC_SERVICE_SHIFT	26
+#define GEF_WDC_ENABLED_SHIFT	31
+
+#define GEF_WDC_ENABLED_TRUE	1
+#define GEF_WDC_ENABLED_FALSE	0
+
+/* Flags bits */
+#define GEF_WDOG_FLAG_OPENED	0
+
+static unsigned long wdt_flags;
+static int wdt_status;
+static void __iomem *gef_wdt_regs;
+static int gef_wdt_timeout;
+static int gef_wdt_count;
+static unsigned int bus_clk;
+static char expect_close;
+static DEFINE_SPINLOCK(gef_wdt_spinlock);
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+
+static int gef_wdt_toggle_wdc(int enabled_predicate, int field_shift)
+{
+	u32 data;
+	u32 enabled;
+	int ret = 0;
+
+	spin_lock(&gef_wdt_spinlock);
+	data = ioread32be(gef_wdt_regs);
+	enabled = (data >> GEF_WDC_ENABLED_SHIFT) & 1;
+
+	/* only toggle the requested field if enabled state matches predicate */
+	if ((enabled ^ enabled_predicate) == 0) {
+		/* We write a 1, then a 2 -- to the appropriate field */
+		data = (1 << field_shift) | gef_wdt_count;
+		iowrite32be(data, gef_wdt_regs);
+
+		data = (2 << field_shift) | gef_wdt_count;
+		iowrite32be(data, gef_wdt_regs);
+		ret = 1;
+	}
+	spin_unlock(&gef_wdt_spinlock);
+
+	return ret;
+}
+
+static void gef_wdt_service(void)
+{
+	gef_wdt_toggle_wdc(GEF_WDC_ENABLED_TRUE,
+		GEF_WDC_SERVICE_SHIFT);
+}
+
+static void gef_wdt_handler_enable(void)
+{
+	if (gef_wdt_toggle_wdc(GEF_WDC_ENABLED_FALSE,
+				   GEF_WDC_ENABLE_SHIFT)) {
+		gef_wdt_service();
+		pr_notice("watchdog activated\n");
+	}
+}
+
+static void gef_wdt_handler_disable(void)
+{
+	if (gef_wdt_toggle_wdc(GEF_WDC_ENABLED_TRUE,
+				   GEF_WDC_ENABLE_SHIFT))
+		pr_notice("watchdog deactivated\n");
+}
+
+static void gef_wdt_set_timeout(unsigned int timeout)
+{
+	/* maximum bus cycle count is 0xFFFFFFFF */
+	if (timeout > 0xFFFFFFFF / bus_clk)
+		timeout = 0xFFFFFFFF / bus_clk;
+
+	/* Register only holds upper 24 bits, bit shifted into lower 24 */
+	gef_wdt_count = (timeout * bus_clk) >> 8;
+	gef_wdt_timeout = timeout;
+}
+
+
+static ssize_t gef_wdt_write(struct file *file, const char __user *data,
+				 size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			expect_close = 0;
+
+			for (i = 0; i != len; i++) {
+				char c;
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+		gef_wdt_service();
+	}
+
+	return len;
+}
+
+static long gef_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	int timeout;
+	int options;
+	void __user *argp = (void __user *)arg;
+	static const struct watchdog_info info = {
+		.options =	WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
+				WDIOF_KEEPALIVEPING,
+		.firmware_version = 0,
+		.identity = "GE watchdog",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &info, sizeof(info)))
+			return -EFAULT;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		if (put_user(wdt_status, (int __user *)argp))
+			return -EFAULT;
+		wdt_status &= ~WDIOF_KEEPALIVEPING;
+		break;
+
+	case WDIOC_SETOPTIONS:
+		if (get_user(options, (int __user *)argp))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD)
+			gef_wdt_handler_disable();
+
+		if (options & WDIOS_ENABLECARD)
+			gef_wdt_handler_enable();
+		break;
+
+	case WDIOC_KEEPALIVE:
+		gef_wdt_service();
+		wdt_status |= WDIOF_KEEPALIVEPING;
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(timeout, (int __user *)argp))
+			return -EFAULT;
+		gef_wdt_set_timeout(timeout);
+		/* Fall through */
+
+	case WDIOC_GETTIMEOUT:
+		if (put_user(gef_wdt_timeout, (int __user *)argp))
+			return -EFAULT;
+		break;
+
+	default:
+		return -ENOTTY;
+	}
+
+	return 0;
+}
+
+static int gef_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(GEF_WDOG_FLAG_OPENED, &wdt_flags))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	gef_wdt_handler_enable();
+
+	return nonseekable_open(inode, file);
+}
+
+static int gef_wdt_release(struct inode *inode, struct file *file)
+{
+	if (expect_close == 42)
+		gef_wdt_handler_disable();
+	else {
+		pr_crit("unexpected close, not stopping timer!\n");
+		gef_wdt_service();
+	}
+	expect_close = 0;
+
+	clear_bit(GEF_WDOG_FLAG_OPENED, &wdt_flags);
+
+	return 0;
+}
+
+static const struct file_operations gef_wdt_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = gef_wdt_write,
+	.unlocked_ioctl = gef_wdt_ioctl,
+	.open = gef_wdt_open,
+	.release = gef_wdt_release,
+};
+
+static struct miscdevice gef_wdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &gef_wdt_fops,
+};
+
+
+static int gef_wdt_probe(struct platform_device *dev)
+{
+	int timeout = 10;
+	u32 freq;
+
+	bus_clk = 133; /* in MHz */
+
+	freq = fsl_get_sys_freq();
+	if (freq != -1)
+		bus_clk = freq;
+
+	/* Map devices registers into memory */
+	gef_wdt_regs = of_iomap(dev->dev.of_node, 0);
+	if (gef_wdt_regs == NULL)
+		return -ENOMEM;
+
+	gef_wdt_set_timeout(timeout);
+
+	gef_wdt_handler_disable();	/* in case timer was already running */
+
+	return misc_register(&gef_wdt_miscdev);
+}
+
+static int gef_wdt_remove(struct platform_device *dev)
+{
+	misc_deregister(&gef_wdt_miscdev);
+
+	gef_wdt_handler_disable();
+
+	iounmap(gef_wdt_regs);
+
+	return 0;
+}
+
+static const struct of_device_id gef_wdt_ids[] = {
+	{
+		.compatible = "gef,fpga-wdt",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, gef_wdt_ids);
+
+static struct platform_driver gef_wdt_driver = {
+	.driver = {
+		.name = "gef_wdt",
+		.of_match_table = gef_wdt_ids,
+	},
+	.probe		= gef_wdt_probe,
+	.remove		= gef_wdt_remove,
+};
+
+static int __init gef_wdt_init(void)
+{
+	pr_info("GE watchdog driver\n");
+	return platform_driver_register(&gef_wdt_driver);
+}
+
+static void __exit gef_wdt_exit(void)
+{
+	platform_driver_unregister(&gef_wdt_driver);
+}
+
+module_init(gef_wdt_init);
+module_exit(gef_wdt_exit);
+
+MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>");
+MODULE_DESCRIPTION("GE watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gef_wdt");
diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c
new file mode 100644
index 000000000..88e01238f
--- /dev/null
+++ b/drivers/watchdog/geodewdt.c
@@ -0,0 +1,295 @@
+/* Watchdog timer for machines with the CS5535/CS5536 companion chip
+ *
+ * Copyright (C) 2006-2007, Advanced Micro Devices, Inc.
+ * Copyright (C) 2009  Andres Salomon <dilinger@collabora.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/uaccess.h>
+
+#include <linux/cs5535.h>
+
+#define GEODEWDT_HZ 500
+#define GEODEWDT_SCALE 6
+#define GEODEWDT_MAX_SECONDS 131
+
+#define WDT_FLAGS_OPEN 1
+#define WDT_FLAGS_ORPHAN 2
+
+#define DRV_NAME "geodewdt"
+#define WATCHDOG_NAME "Geode GX/LX WDT"
+#define WATCHDOG_TIMEOUT 60
+
+static int timeout = WATCHDOG_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. 1<= timeout <=131, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static struct platform_device *geodewdt_platform_device;
+static unsigned long wdt_flags;
+static struct cs5535_mfgpt_timer *wdt_timer;
+static int safe_close;
+
+static void geodewdt_ping(void)
+{
+	/* Stop the counter */
+	cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0);
+
+	/* Reset the counter */
+	cs5535_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0);
+
+	/* Enable the counter */
+	cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN);
+}
+
+static void geodewdt_disable(void)
+{
+	cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0);
+	cs5535_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0);
+}
+
+static int geodewdt_set_heartbeat(int val)
+{
+	if (val < 1 || val > GEODEWDT_MAX_SECONDS)
+		return -EINVAL;
+
+	cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0);
+	cs5535_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, val * GEODEWDT_HZ);
+	cs5535_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0);
+	cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN);
+
+	timeout = val;
+	return 0;
+}
+
+static int geodewdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(WDT_FLAGS_OPEN, &wdt_flags))
+		return -EBUSY;
+
+	if (!test_and_clear_bit(WDT_FLAGS_ORPHAN, &wdt_flags))
+		__module_get(THIS_MODULE);
+
+	geodewdt_ping();
+	return nonseekable_open(inode, file);
+}
+
+static int geodewdt_release(struct inode *inode, struct file *file)
+{
+	if (safe_close) {
+		geodewdt_disable();
+		module_put(THIS_MODULE);
+	} else {
+		pr_crit("Unexpected close - watchdog is not stopping\n");
+		geodewdt_ping();
+
+		set_bit(WDT_FLAGS_ORPHAN, &wdt_flags);
+	}
+
+	clear_bit(WDT_FLAGS_OPEN, &wdt_flags);
+	safe_close = 0;
+	return 0;
+}
+
+static ssize_t geodewdt_write(struct file *file, const char __user *data,
+				size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+			safe_close = 0;
+
+			for (i = 0; i != len; i++) {
+				char c;
+
+				if (get_user(c, data + i))
+					return -EFAULT;
+
+				if (c == 'V')
+					safe_close = 1;
+			}
+		}
+
+		geodewdt_ping();
+	}
+	return len;
+}
+
+static long geodewdt_ioctl(struct file *file, unsigned int cmd,
+				unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int interval;
+
+	static const struct watchdog_info ident = {
+		.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING
+		| WDIOF_MAGICCLOSE,
+		.firmware_version =     1,
+		.identity =             WATCHDOG_NAME,
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident,
+				    sizeof(ident)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_SETOPTIONS:
+	{
+		int options, ret = -EINVAL;
+
+		if (get_user(options, p))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD) {
+			geodewdt_disable();
+			ret = 0;
+		}
+
+		if (options & WDIOS_ENABLECARD) {
+			geodewdt_ping();
+			ret = 0;
+		}
+
+		return ret;
+	}
+	case WDIOC_KEEPALIVE:
+		geodewdt_ping();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(interval, p))
+			return -EFAULT;
+
+		if (geodewdt_set_heartbeat(interval))
+			return -EINVAL;
+	/* Fall through */
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+
+	default:
+		return -ENOTTY;
+	}
+
+	return 0;
+}
+
+static const struct file_operations geodewdt_fops = {
+	.owner          = THIS_MODULE,
+	.llseek         = no_llseek,
+	.write          = geodewdt_write,
+	.unlocked_ioctl = geodewdt_ioctl,
+	.open           = geodewdt_open,
+	.release        = geodewdt_release,
+};
+
+static struct miscdevice geodewdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &geodewdt_fops,
+};
+
+static int __init geodewdt_probe(struct platform_device *dev)
+{
+	int ret;
+
+	wdt_timer = cs5535_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING);
+	if (!wdt_timer) {
+		pr_err("No timers were available\n");
+		return -ENODEV;
+	}
+
+	/* Set up the timer */
+
+	cs5535_mfgpt_write(wdt_timer, MFGPT_REG_SETUP,
+			  GEODEWDT_SCALE | (3 << 8));
+
+	/* Set up comparator 2 to reset when the event fires */
+	cs5535_mfgpt_toggle_event(wdt_timer, MFGPT_CMP2, MFGPT_EVENT_RESET, 1);
+
+	/* Set up the initial timeout */
+
+	cs5535_mfgpt_write(wdt_timer, MFGPT_REG_CMP2,
+		timeout * GEODEWDT_HZ);
+
+	ret = misc_register(&geodewdt_miscdev);
+
+	return ret;
+}
+
+static int geodewdt_remove(struct platform_device *dev)
+{
+	misc_deregister(&geodewdt_miscdev);
+	return 0;
+}
+
+static void geodewdt_shutdown(struct platform_device *dev)
+{
+	geodewdt_disable();
+}
+
+static struct platform_driver geodewdt_driver = {
+	.remove		= geodewdt_remove,
+	.shutdown	= geodewdt_shutdown,
+	.driver		= {
+		.name	= DRV_NAME,
+	},
+};
+
+static int __init geodewdt_init(void)
+{
+	int ret;
+
+	geodewdt_platform_device = platform_device_register_simple(DRV_NAME,
+								-1, NULL, 0);
+	if (IS_ERR(geodewdt_platform_device))
+		return PTR_ERR(geodewdt_platform_device);
+
+	ret = platform_driver_probe(&geodewdt_driver, geodewdt_probe);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	platform_device_unregister(geodewdt_platform_device);
+	return ret;
+}
+
+static void __exit geodewdt_exit(void)
+{
+	platform_device_unregister(geodewdt_platform_device);
+	platform_driver_unregister(&geodewdt_driver);
+}
+
+module_init(geodewdt_init);
+module_exit(geodewdt_exit);
+
+MODULE_AUTHOR("Advanced Micro Devices, Inc");
+MODULE_DESCRIPTION("Geode GX/LX Watchdog Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/gpio_wdt.c b/drivers/watchdog/gpio_wdt.c
new file mode 100644
index 000000000..ea77cae03
--- /dev/null
+++ b/drivers/watchdog/gpio_wdt.c
@@ -0,0 +1,205 @@
+/*
+ * Driver for watchdog device controlled through GPIO-line
+ *
+ * Author: 2013, Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define SOFT_TIMEOUT_MIN	1
+#define SOFT_TIMEOUT_DEF	60
+
+enum {
+	HW_ALGO_TOGGLE,
+	HW_ALGO_LEVEL,
+};
+
+struct gpio_wdt_priv {
+	struct gpio_desc	*gpiod;
+	bool			state;
+	bool			always_running;
+	unsigned int		hw_algo;
+	struct watchdog_device	wdd;
+};
+
+static void gpio_wdt_disable(struct gpio_wdt_priv *priv)
+{
+	/* Eternal ping */
+	gpiod_set_value_cansleep(priv->gpiod, 1);
+
+	/* Put GPIO back to tristate */
+	if (priv->hw_algo == HW_ALGO_TOGGLE)
+		gpiod_direction_input(priv->gpiod);
+}
+
+static int gpio_wdt_ping(struct watchdog_device *wdd)
+{
+	struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+	switch (priv->hw_algo) {
+	case HW_ALGO_TOGGLE:
+		/* Toggle output pin */
+		priv->state = !priv->state;
+		gpiod_set_value_cansleep(priv->gpiod, priv->state);
+		break;
+	case HW_ALGO_LEVEL:
+		/* Pulse */
+		gpiod_set_value_cansleep(priv->gpiod, 1);
+		udelay(1);
+		gpiod_set_value_cansleep(priv->gpiod, 0);
+		break;
+	}
+	return 0;
+}
+
+static int gpio_wdt_start(struct watchdog_device *wdd)
+{
+	struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+	priv->state = 0;
+	gpiod_direction_output(priv->gpiod, priv->state);
+
+	set_bit(WDOG_HW_RUNNING, &wdd->status);
+
+	return gpio_wdt_ping(wdd);
+}
+
+static int gpio_wdt_stop(struct watchdog_device *wdd)
+{
+	struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+	if (!priv->always_running) {
+		gpio_wdt_disable(priv);
+	} else {
+		set_bit(WDOG_HW_RUNNING, &wdd->status);
+	}
+
+	return 0;
+}
+
+static const struct watchdog_info gpio_wdt_ident = {
+	.options	= WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING |
+			  WDIOF_SETTIMEOUT,
+	.identity	= "GPIO Watchdog",
+};
+
+static const struct watchdog_ops gpio_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= gpio_wdt_start,
+	.stop		= gpio_wdt_stop,
+	.ping		= gpio_wdt_ping,
+};
+
+static int gpio_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct gpio_wdt_priv *priv;
+	enum gpiod_flags gflags;
+	unsigned int hw_margin;
+	const char *algo;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+
+	ret = of_property_read_string(np, "hw_algo", &algo);
+	if (ret)
+		return ret;
+	if (!strcmp(algo, "toggle")) {
+		priv->hw_algo = HW_ALGO_TOGGLE;
+		gflags = GPIOD_IN;
+	} else if (!strcmp(algo, "level")) {
+		priv->hw_algo = HW_ALGO_LEVEL;
+		gflags = GPIOD_OUT_LOW;
+	} else {
+		return -EINVAL;
+	}
+
+	priv->gpiod = devm_gpiod_get(dev, NULL, gflags);
+	if (IS_ERR(priv->gpiod))
+		return PTR_ERR(priv->gpiod);
+
+	ret = of_property_read_u32(np,
+				   "hw_margin_ms", &hw_margin);
+	if (ret)
+		return ret;
+	/* Disallow values lower than 2 and higher than 65535 ms */
+	if (hw_margin < 2 || hw_margin > 65535)
+		return -EINVAL;
+
+	priv->always_running = of_property_read_bool(np,
+						     "always-running");
+
+	watchdog_set_drvdata(&priv->wdd, priv);
+
+	priv->wdd.info		= &gpio_wdt_ident;
+	priv->wdd.ops		= &gpio_wdt_ops;
+	priv->wdd.min_timeout	= SOFT_TIMEOUT_MIN;
+	priv->wdd.max_hw_heartbeat_ms = hw_margin;
+	priv->wdd.parent	= dev;
+	priv->wdd.timeout	= SOFT_TIMEOUT_DEF;
+
+	watchdog_init_timeout(&priv->wdd, 0, &pdev->dev);
+
+	watchdog_stop_on_reboot(&priv->wdd);
+
+	if (priv->always_running)
+		gpio_wdt_start(&priv->wdd);
+
+	ret = watchdog_register_device(&priv->wdd);
+
+	return ret;
+}
+
+static int gpio_wdt_remove(struct platform_device *pdev)
+{
+	struct gpio_wdt_priv *priv = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&priv->wdd);
+
+	return 0;
+}
+
+static const struct of_device_id gpio_wdt_dt_ids[] = {
+	{ .compatible = "linux,wdt-gpio", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gpio_wdt_dt_ids);
+
+static struct platform_driver gpio_wdt_driver = {
+	.driver	= {
+		.name		= "gpio-wdt",
+		.of_match_table	= gpio_wdt_dt_ids,
+	},
+	.probe	= gpio_wdt_probe,
+	.remove	= gpio_wdt_remove,
+};
+
+#ifdef CONFIG_GPIO_WATCHDOG_ARCH_INITCALL
+static int __init gpio_wdt_init(void)
+{
+	return platform_driver_register(&gpio_wdt_driver);
+}
+arch_initcall(gpio_wdt_init);
+#else
+module_platform_driver(gpio_wdt_driver);
+#endif
+
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("GPIO Watchdog");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
new file mode 100644
index 000000000..9dc62a461
--- /dev/null
+++ b/drivers/watchdog/hpwdt.c
@@ -0,0 +1,376 @@
+/*
+ *	HPE WatchDog Driver
+ *	based on
+ *
+ *	SoftDog	0.05:	A Software Watchdog Device
+ *
+ *	(c) Copyright 2018 Hewlett Packard Enterprise Development LP
+ *	Thomas Mingarelli <thomas.mingarelli@hpe.com>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	version 2 as published by the Free Software Foundation
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <asm/nmi.h>
+
+#define HPWDT_VERSION			"2.0.0"
+#define SECS_TO_TICKS(secs)		((secs) * 1000 / 128)
+#define TICKS_TO_SECS(ticks)		((ticks) * 128 / 1000)
+#define HPWDT_MAX_TIMER			TICKS_TO_SECS(65535)
+#define DEFAULT_MARGIN			30
+#define PRETIMEOUT_SEC			9
+
+static bool ilo5;
+static unsigned int soft_margin = DEFAULT_MARGIN;	/* in seconds */
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static bool pretimeout = IS_ENABLED(CONFIG_HPWDT_NMI_DECODING);
+
+static void __iomem *pci_mem_addr;		/* the PCI-memory address */
+static unsigned long __iomem *hpwdt_nmistat;
+static unsigned long __iomem *hpwdt_timer_reg;
+static unsigned long __iomem *hpwdt_timer_con;
+
+static const struct pci_device_id hpwdt_devices[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB203) },	/* iLO2 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3306) },	/* iLO3 */
+	{0},			/* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, hpwdt_devices);
+
+
+/*
+ *	Watchdog operations
+ */
+static int hpwdt_start(struct watchdog_device *wdd)
+{
+	int control = 0x81 | (pretimeout ? 0x4 : 0);
+	int reload = SECS_TO_TICKS(wdd->timeout);
+
+	dev_dbg(wdd->parent, "start watchdog 0x%08x:0x%02x\n", reload, control);
+	iowrite16(reload, hpwdt_timer_reg);
+	iowrite8(control, hpwdt_timer_con);
+
+	return 0;
+}
+
+static void hpwdt_stop(void)
+{
+	unsigned long data;
+
+	pr_debug("stop  watchdog\n");
+
+	data = ioread8(hpwdt_timer_con);
+	data &= 0xFE;
+	iowrite8(data, hpwdt_timer_con);
+}
+
+static int hpwdt_stop_core(struct watchdog_device *wdd)
+{
+	hpwdt_stop();
+
+	return 0;
+}
+
+static int hpwdt_ping(struct watchdog_device *wdd)
+{
+	int reload = SECS_TO_TICKS(wdd->timeout);
+
+	dev_dbg(wdd->parent, "ping  watchdog 0x%08x\n", reload);
+	iowrite16(reload, hpwdt_timer_reg);
+
+	return 0;
+}
+
+static unsigned int hpwdt_gettimeleft(struct watchdog_device *wdd)
+{
+	return TICKS_TO_SECS(ioread16(hpwdt_timer_reg));
+}
+
+static int hpwdt_settimeout(struct watchdog_device *wdd, unsigned int val)
+{
+	dev_dbg(wdd->parent, "set_timeout = %d\n", val);
+
+	wdd->timeout = val;
+	if (val <= wdd->pretimeout) {
+		dev_dbg(wdd->parent, "pretimeout < timeout. Setting to zero\n");
+		wdd->pretimeout = 0;
+		pretimeout = 0;
+		if (watchdog_active(wdd))
+			hpwdt_start(wdd);
+	}
+	hpwdt_ping(wdd);
+
+	return 0;
+}
+
+#ifdef CONFIG_HPWDT_NMI_DECODING
+static int hpwdt_set_pretimeout(struct watchdog_device *wdd, unsigned int req)
+{
+	unsigned int val = 0;
+
+	dev_dbg(wdd->parent, "set_pretimeout = %d\n", req);
+	if (req) {
+		val = PRETIMEOUT_SEC;
+		if (val >= wdd->timeout)
+			return -EINVAL;
+	}
+
+	if (val != req)
+		dev_dbg(wdd->parent, "Rounding pretimeout to: %d\n", val);
+
+	wdd->pretimeout = val;
+	pretimeout = !!val;
+
+	if (watchdog_active(wdd))
+		hpwdt_start(wdd);
+
+	return 0;
+}
+
+static int hpwdt_my_nmi(void)
+{
+	return ioread8(hpwdt_nmistat) & 0x6;
+}
+
+/*
+ *	NMI Handler
+ */
+static int hpwdt_pretimeout(unsigned int ulReason, struct pt_regs *regs)
+{
+	unsigned int mynmi = hpwdt_my_nmi();
+	static char panic_msg[] =
+		"00: An NMI occurred. Depending on your system the reason "
+		"for the NMI is logged in any one of the following resources:\n"
+		"1. Integrated Management Log (IML)\n"
+		"2. OA Syslog\n"
+		"3. OA Forward Progress Log\n"
+		"4. iLO Event Log";
+
+	if (ilo5 && ulReason == NMI_UNKNOWN && !mynmi)
+		return NMI_DONE;
+
+	if (ilo5 && !pretimeout)
+		return NMI_DONE;
+
+	hpwdt_stop();
+
+	hex_byte_pack(panic_msg, mynmi);
+	nmi_panic(regs, panic_msg);
+
+	return NMI_HANDLED;
+}
+#endif /* CONFIG_HPWDT_NMI_DECODING */
+
+
+static const struct watchdog_info ident = {
+	.options = WDIOF_PRETIMEOUT    |
+		   WDIOF_SETTIMEOUT    |
+		   WDIOF_KEEPALIVEPING |
+		   WDIOF_MAGICCLOSE,
+	.identity = "HPE iLO2+ HW Watchdog Timer",
+};
+
+/*
+ *	Kernel interfaces
+ */
+
+static const struct watchdog_ops hpwdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= hpwdt_start,
+	.stop		= hpwdt_stop_core,
+	.ping		= hpwdt_ping,
+	.set_timeout	= hpwdt_settimeout,
+	.get_timeleft	= hpwdt_gettimeleft,
+#ifdef CONFIG_HPWDT_NMI_DECODING
+	.set_pretimeout	= hpwdt_set_pretimeout,
+#endif
+};
+
+static struct watchdog_device hpwdt_dev = {
+	.info		= &ident,
+	.ops		= &hpwdt_ops,
+	.min_timeout	= 1,
+	.max_timeout	= HPWDT_MAX_TIMER,
+	.timeout	= DEFAULT_MARGIN,
+#ifdef CONFIG_HPWDT_NMI_DECODING
+	.pretimeout	= PRETIMEOUT_SEC,
+#endif
+};
+
+
+/*
+ *	Init & Exit
+ */
+
+static int hpwdt_init_nmi_decoding(struct pci_dev *dev)
+{
+#ifdef CONFIG_HPWDT_NMI_DECODING
+	int retval;
+	/*
+	 * Only one function can register for NMI_UNKNOWN
+	 */
+	retval = register_nmi_handler(NMI_UNKNOWN, hpwdt_pretimeout, 0, "hpwdt");
+	if (retval)
+		goto error;
+	retval = register_nmi_handler(NMI_SERR, hpwdt_pretimeout, 0, "hpwdt");
+	if (retval)
+		goto error1;
+	retval = register_nmi_handler(NMI_IO_CHECK, hpwdt_pretimeout, 0, "hpwdt");
+	if (retval)
+		goto error2;
+
+	dev_info(&dev->dev,
+		"HPE Watchdog Timer Driver: NMI decoding initialized\n");
+
+	return 0;
+
+error2:
+	unregister_nmi_handler(NMI_SERR, "hpwdt");
+error1:
+	unregister_nmi_handler(NMI_UNKNOWN, "hpwdt");
+error:
+	dev_warn(&dev->dev,
+		"Unable to register a die notifier (err=%d).\n",
+		retval);
+	return retval;
+#endif	/* CONFIG_HPWDT_NMI_DECODING */
+	return 0;
+}
+
+static void hpwdt_exit_nmi_decoding(void)
+{
+#ifdef CONFIG_HPWDT_NMI_DECODING
+	unregister_nmi_handler(NMI_UNKNOWN, "hpwdt");
+	unregister_nmi_handler(NMI_SERR, "hpwdt");
+	unregister_nmi_handler(NMI_IO_CHECK, "hpwdt");
+#endif
+}
+
+static int hpwdt_init_one(struct pci_dev *dev,
+					const struct pci_device_id *ent)
+{
+	int retval;
+
+	/*
+	 * First let's find out if we are on an iLO2+ server. We will
+	 * not run on a legacy ASM box.
+	 * So we only support the G5 ProLiant servers and higher.
+	 */
+	if (dev->subsystem_vendor != PCI_VENDOR_ID_HP &&
+	    dev->subsystem_vendor != PCI_VENDOR_ID_HP_3PAR) {
+		dev_warn(&dev->dev,
+			"This server does not have an iLO2+ ASIC.\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Ignore all auxilary iLO devices with the following PCI ID
+	 */
+	if (dev->subsystem_vendor == PCI_VENDOR_ID_HP &&
+	    dev->subsystem_device == 0x1979)
+		return -ENODEV;
+
+	if (pci_enable_device(dev)) {
+		dev_warn(&dev->dev,
+			"Not possible to enable PCI Device: 0x%x:0x%x.\n",
+			ent->vendor, ent->device);
+		return -ENODEV;
+	}
+
+	pci_mem_addr = pci_iomap(dev, 1, 0x80);
+	if (!pci_mem_addr) {
+		dev_warn(&dev->dev,
+			"Unable to detect the iLO2+ server memory.\n");
+		retval = -ENOMEM;
+		goto error_pci_iomap;
+	}
+	hpwdt_nmistat	= pci_mem_addr + 0x6e;
+	hpwdt_timer_reg = pci_mem_addr + 0x70;
+	hpwdt_timer_con = pci_mem_addr + 0x72;
+
+	/* Make sure that timer is disabled until /dev/watchdog is opened */
+	hpwdt_stop();
+
+	/* Initialize NMI Decoding functionality */
+	retval = hpwdt_init_nmi_decoding(dev);
+	if (retval != 0)
+		goto error_init_nmi_decoding;
+
+	watchdog_set_nowayout(&hpwdt_dev, nowayout);
+	if (watchdog_init_timeout(&hpwdt_dev, soft_margin, NULL))
+		dev_warn(&dev->dev, "Invalid soft_margin: %d.\n", soft_margin);
+
+	hpwdt_dev.parent = &dev->dev;
+	retval = watchdog_register_device(&hpwdt_dev);
+	if (retval < 0) {
+		dev_err(&dev->dev, "watchdog register failed: %d.\n", retval);
+		goto error_wd_register;
+	}
+
+	dev_info(&dev->dev, "HPE Watchdog Timer Driver: %s"
+			", timer margin: %d seconds (nowayout=%d).\n",
+			HPWDT_VERSION, hpwdt_dev.timeout, nowayout);
+
+	if (dev->subsystem_vendor == PCI_VENDOR_ID_HP_3PAR)
+		ilo5 = true;
+
+	return 0;
+
+error_wd_register:
+	hpwdt_exit_nmi_decoding();
+error_init_nmi_decoding:
+	pci_iounmap(dev, pci_mem_addr);
+error_pci_iomap:
+	pci_disable_device(dev);
+	return retval;
+}
+
+static void hpwdt_exit(struct pci_dev *dev)
+{
+	if (!nowayout)
+		hpwdt_stop();
+
+	watchdog_unregister_device(&hpwdt_dev);
+	hpwdt_exit_nmi_decoding();
+	pci_iounmap(dev, pci_mem_addr);
+	pci_disable_device(dev);
+}
+
+static struct pci_driver hpwdt_driver = {
+	.name = "hpwdt",
+	.id_table = hpwdt_devices,
+	.probe = hpwdt_init_one,
+	.remove = hpwdt_exit,
+};
+
+MODULE_AUTHOR("Tom Mingarelli");
+MODULE_DESCRIPTION("hpe watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(HPWDT_VERSION);
+
+module_param(soft_margin, int, 0);
+MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+#ifdef CONFIG_HPWDT_NMI_DECODING
+module_param(pretimeout, bool, 0);
+MODULE_PARM_DESC(pretimeout, "Watchdog pretimeout enabled");
+#endif
+
+module_pci_driver(hpwdt_driver);
diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c
new file mode 100644
index 000000000..950c71a8b
--- /dev/null
+++ b/drivers/watchdog/i6300esb.c
@@ -0,0 +1,363 @@
+/*
+ *	i6300esb:	Watchdog timer driver for Intel 6300ESB chipset
+ *
+ *	(c) Copyright 2004 Google Inc.
+ *	(c) Copyright 2005 David Härdeman <david@2gen.com>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	based on i810-tco.c which is in turn based on softdog.c
+ *
+ *	The timer is implemented in the following I/O controller hubs:
+ *	(See the intel documentation on http://developer.intel.com.)
+ *	6300ESB chip : document number 300641-004
+ *
+ *  2004YYZZ Ross Biro
+ *	Initial version 0.01
+ *  2004YYZZ Ross Biro
+ *	Version 0.02
+ *  20050210 David Härdeman <david@2gen.com>
+ *	Ported driver to kernel 2.6
+ *  20171016 Radu Rendec <rrendec@arista.com>
+ *	Change driver to use the watchdog subsystem
+ *	Add support for multiple 6300ESB devices
+ */
+
+/*
+ *      Includes, defines, variables, module parameters, ...
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+/* Module and version information */
+#define ESB_MODULE_NAME "i6300ESB timer"
+
+/* PCI configuration registers */
+#define ESB_CONFIG_REG  0x60            /* Config register                   */
+#define ESB_LOCK_REG    0x68            /* WDT lock register                 */
+
+/* Memory mapped registers */
+#define ESB_TIMER1_REG(w) ((w)->base + 0x00)/* Timer1 value after each reset */
+#define ESB_TIMER2_REG(w) ((w)->base + 0x04)/* Timer2 value after each reset */
+#define ESB_GINTSR_REG(w) ((w)->base + 0x08)/* General Interrupt Status Reg  */
+#define ESB_RELOAD_REG(w) ((w)->base + 0x0c)/* Reload register               */
+
+/* Lock register bits */
+#define ESB_WDT_FUNC    (0x01 << 2)   /* Watchdog functionality            */
+#define ESB_WDT_ENABLE  (0x01 << 1)   /* Enable WDT                        */
+#define ESB_WDT_LOCK    (0x01 << 0)   /* Lock (nowayout)                   */
+
+/* Config register bits */
+#define ESB_WDT_REBOOT  (0x01 << 5)   /* Enable reboot on timeout          */
+#define ESB_WDT_FREQ    (0x01 << 2)   /* Decrement frequency               */
+#define ESB_WDT_INTTYPE (0x03 << 0)   /* Interrupt type on timer1 timeout  */
+
+/* Reload register bits */
+#define ESB_WDT_TIMEOUT (0x01 << 9)    /* Watchdog timed out                */
+#define ESB_WDT_RELOAD  (0x01 << 8)    /* prevent timeout                   */
+
+/* Magic constants */
+#define ESB_UNLOCK1     0x80            /* Step 1 to unlock reset registers  */
+#define ESB_UNLOCK2     0x86            /* Step 2 to unlock reset registers  */
+
+/* module parameters */
+/* 30 sec default heartbeat (1 < heartbeat < 2*1023) */
+#define ESB_HEARTBEAT_MIN	1
+#define ESB_HEARTBEAT_MAX	2046
+#define ESB_HEARTBEAT_DEFAULT	30
+#define ESB_HEARTBEAT_RANGE __MODULE_STRING(ESB_HEARTBEAT_MIN) \
+	"<heartbeat<" __MODULE_STRING(ESB_HEARTBEAT_MAX)
+static int heartbeat; /* in seconds */
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat,
+	"Watchdog heartbeat in seconds. (" ESB_HEARTBEAT_RANGE
+	", default=" __MODULE_STRING(ESB_HEARTBEAT_DEFAULT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/* internal variables */
+struct esb_dev {
+	struct watchdog_device wdd;
+	void __iomem *base;
+	struct pci_dev *pdev;
+};
+
+#define to_esb_dev(wptr) container_of(wptr, struct esb_dev, wdd)
+
+/*
+ * Some i6300ESB specific functions
+ */
+
+/*
+ * Prepare for reloading the timer by unlocking the proper registers.
+ * This is performed by first writing 0x80 followed by 0x86 to the
+ * reload register. After this the appropriate registers can be written
+ * to once before they need to be unlocked again.
+ */
+static inline void esb_unlock_registers(struct esb_dev *edev)
+{
+	writew(ESB_UNLOCK1, ESB_RELOAD_REG(edev));
+	writew(ESB_UNLOCK2, ESB_RELOAD_REG(edev));
+}
+
+static int esb_timer_start(struct watchdog_device *wdd)
+{
+	struct esb_dev *edev = to_esb_dev(wdd);
+	int _wdd_nowayout = test_bit(WDOG_NO_WAY_OUT, &wdd->status);
+	u8 val;
+
+	esb_unlock_registers(edev);
+	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG(edev));
+	/* Enable or Enable + Lock? */
+	val = ESB_WDT_ENABLE | (_wdd_nowayout ? ESB_WDT_LOCK : 0x00);
+	pci_write_config_byte(edev->pdev, ESB_LOCK_REG, val);
+	return 0;
+}
+
+static int esb_timer_stop(struct watchdog_device *wdd)
+{
+	struct esb_dev *edev = to_esb_dev(wdd);
+	u8 val;
+
+	/* First, reset timers as suggested by the docs */
+	esb_unlock_registers(edev);
+	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG(edev));
+	/* Then disable the WDT */
+	pci_write_config_byte(edev->pdev, ESB_LOCK_REG, 0x0);
+	pci_read_config_byte(edev->pdev, ESB_LOCK_REG, &val);
+
+	/* Returns 0 if the timer was disabled, non-zero otherwise */
+	return val & ESB_WDT_ENABLE;
+}
+
+static int esb_timer_keepalive(struct watchdog_device *wdd)
+{
+	struct esb_dev *edev = to_esb_dev(wdd);
+
+	esb_unlock_registers(edev);
+	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG(edev));
+	/* FIXME: Do we need to flush anything here? */
+	return 0;
+}
+
+static int esb_timer_set_heartbeat(struct watchdog_device *wdd,
+		unsigned int time)
+{
+	struct esb_dev *edev = to_esb_dev(wdd);
+	u32 val;
+
+	/* We shift by 9, so if we are passed a value of 1 sec,
+	 * val will be 1 << 9 = 512, then write that to two
+	 * timers => 2 * 512 = 1024 (which is decremented at 1KHz)
+	 */
+	val = time << 9;
+
+	/* Write timer 1 */
+	esb_unlock_registers(edev);
+	writel(val, ESB_TIMER1_REG(edev));
+
+	/* Write timer 2 */
+	esb_unlock_registers(edev);
+	writel(val, ESB_TIMER2_REG(edev));
+
+	/* Reload */
+	esb_unlock_registers(edev);
+	writew(ESB_WDT_RELOAD, ESB_RELOAD_REG(edev));
+
+	/* FIXME: Do we need to flush everything out? */
+
+	/* Done */
+	wdd->timeout = time;
+	return 0;
+}
+
+/*
+ * Watchdog Subsystem Interfaces
+ */
+
+static struct watchdog_info esb_info = {
+	.identity = ESB_MODULE_NAME,
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops esb_ops = {
+	.owner = THIS_MODULE,
+	.start = esb_timer_start,
+	.stop = esb_timer_stop,
+	.set_timeout = esb_timer_set_heartbeat,
+	.ping = esb_timer_keepalive,
+};
+
+/*
+ * Data for PCI driver interface
+ */
+static const struct pci_device_id esb_pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
+	{ 0, },                 /* End of list */
+};
+MODULE_DEVICE_TABLE(pci, esb_pci_tbl);
+
+/*
+ *      Init & exit routines
+ */
+
+static unsigned char esb_getdevice(struct esb_dev *edev)
+{
+	if (pci_enable_device(edev->pdev)) {
+		dev_err(&edev->pdev->dev, "failed to enable device\n");
+		goto err_devput;
+	}
+
+	if (pci_request_region(edev->pdev, 0, ESB_MODULE_NAME)) {
+		dev_err(&edev->pdev->dev, "failed to request region\n");
+		goto err_disable;
+	}
+
+	edev->base = pci_ioremap_bar(edev->pdev, 0);
+	if (edev->base == NULL) {
+		/* Something's wrong here, BASEADDR has to be set */
+		dev_err(&edev->pdev->dev, "failed to get BASEADDR\n");
+		goto err_release;
+	}
+
+	/* Done */
+	dev_set_drvdata(&edev->pdev->dev, edev);
+	return 1;
+
+err_release:
+	pci_release_region(edev->pdev, 0);
+err_disable:
+	pci_disable_device(edev->pdev);
+err_devput:
+	return 0;
+}
+
+static void esb_initdevice(struct esb_dev *edev)
+{
+	u8 val1;
+	u16 val2;
+
+	/*
+	 * Config register:
+	 * Bit    5 : 0 = Enable WDT_OUTPUT
+	 * Bit    2 : 0 = set the timer frequency to the PCI clock
+	 * divided by 2^15 (approx 1KHz).
+	 * Bits 1:0 : 11 = WDT_INT_TYPE Disabled.
+	 * The watchdog has two timers, it can be setup so that the
+	 * expiry of timer1 results in an interrupt and the expiry of
+	 * timer2 results in a reboot. We set it to not generate
+	 * any interrupts as there is not much we can do with it
+	 * right now.
+	 */
+	pci_write_config_word(edev->pdev, ESB_CONFIG_REG, 0x0003);
+
+	/* Check that the WDT isn't already locked */
+	pci_read_config_byte(edev->pdev, ESB_LOCK_REG, &val1);
+	if (val1 & ESB_WDT_LOCK)
+		dev_warn(&edev->pdev->dev, "nowayout already set\n");
+
+	/* Set the timer to watchdog mode and disable it for now */
+	pci_write_config_byte(edev->pdev, ESB_LOCK_REG, 0x00);
+
+	/* Check if the watchdog was previously triggered */
+	esb_unlock_registers(edev);
+	val2 = readw(ESB_RELOAD_REG(edev));
+	if (val2 & ESB_WDT_TIMEOUT)
+		edev->wdd.bootstatus = WDIOF_CARDRESET;
+
+	/* Reset WDT_TIMEOUT flag and timers */
+	esb_unlock_registers(edev);
+	writew((ESB_WDT_TIMEOUT | ESB_WDT_RELOAD), ESB_RELOAD_REG(edev));
+
+	/* And set the correct timeout value */
+	esb_timer_set_heartbeat(&edev->wdd, edev->wdd.timeout);
+}
+
+static int esb_probe(struct pci_dev *pdev,
+		const struct pci_device_id *ent)
+{
+	struct esb_dev *edev;
+	int ret;
+
+	edev = devm_kzalloc(&pdev->dev, sizeof(*edev), GFP_KERNEL);
+	if (!edev)
+		return -ENOMEM;
+
+	/* Check whether or not the hardware watchdog is there */
+	edev->pdev = pdev;
+	if (!esb_getdevice(edev))
+		return -ENODEV;
+
+	/* Initialize the watchdog and make sure it does not run */
+	edev->wdd.info = &esb_info;
+	edev->wdd.ops = &esb_ops;
+	edev->wdd.min_timeout = ESB_HEARTBEAT_MIN;
+	edev->wdd.max_timeout = ESB_HEARTBEAT_MAX;
+	edev->wdd.timeout = ESB_HEARTBEAT_DEFAULT;
+	if (watchdog_init_timeout(&edev->wdd, heartbeat, NULL))
+		dev_info(&pdev->dev,
+			"heartbeat value must be " ESB_HEARTBEAT_RANGE
+			", using %u\n", edev->wdd.timeout);
+	watchdog_set_nowayout(&edev->wdd, nowayout);
+	watchdog_stop_on_reboot(&edev->wdd);
+	watchdog_stop_on_unregister(&edev->wdd);
+	esb_initdevice(edev);
+
+	/* Register the watchdog so that userspace has access to it */
+	ret = watchdog_register_device(&edev->wdd);
+	if (ret != 0) {
+		dev_err(&pdev->dev,
+			"cannot register watchdog device (err=%d)\n", ret);
+		goto err_unmap;
+	}
+	dev_info(&pdev->dev,
+		"initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
+		edev->base, edev->wdd.timeout, nowayout);
+	return 0;
+
+err_unmap:
+	iounmap(edev->base);
+	pci_release_region(edev->pdev, 0);
+	pci_disable_device(edev->pdev);
+	return ret;
+}
+
+static void esb_remove(struct pci_dev *pdev)
+{
+	struct esb_dev *edev = dev_get_drvdata(&pdev->dev);
+
+	watchdog_unregister_device(&edev->wdd);
+	iounmap(edev->base);
+	pci_release_region(edev->pdev, 0);
+	pci_disable_device(edev->pdev);
+}
+
+static struct pci_driver esb_driver = {
+	.name		= ESB_MODULE_NAME,
+	.id_table	= esb_pci_tbl,
+	.probe          = esb_probe,
+	.remove         = esb_remove,
+};
+
+module_pci_driver(esb_driver);
+
+MODULE_AUTHOR("Ross Biro and David Härdeman");
+MODULE_DESCRIPTION("Watchdog driver for Intel 6300ESB chipsets");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/iTCO_vendor.h b/drivers/watchdog/iTCO_vendor.h
new file mode 100644
index 000000000..7b82a7c6e
--- /dev/null
+++ b/drivers/watchdog/iTCO_vendor.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* iTCO Vendor Specific Support hooks */
+#ifdef CONFIG_ITCO_VENDOR_SUPPORT
+extern void iTCO_vendor_pre_start(struct resource *, unsigned int);
+extern void iTCO_vendor_pre_stop(struct resource *);
+extern void iTCO_vendor_pre_keepalive(struct resource *, unsigned int);
+extern void iTCO_vendor_pre_set_heartbeat(unsigned int);
+extern int iTCO_vendor_check_noreboot_on(void);
+#else
+#define iTCO_vendor_pre_start(acpibase, heartbeat)	{}
+#define iTCO_vendor_pre_stop(acpibase)			{}
+#define iTCO_vendor_pre_keepalive(acpibase, heartbeat)	{}
+#define iTCO_vendor_pre_set_heartbeat(heartbeat)	{}
+#define iTCO_vendor_check_noreboot_on()			1
+				/* 1=check noreboot; 0=don't check */
+#endif
diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c
new file mode 100644
index 000000000..b6b2f90b5
--- /dev/null
+++ b/drivers/watchdog/iTCO_vendor_support.c
@@ -0,0 +1,371 @@
+/*
+ *	intel TCO vendor specific watchdog driver support
+ *
+ *	(c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
+ *	provide warranty for any of this software. This material is
+ *	provided "AS-IS" and at no charge.
+ */
+
+/*
+ *	Includes, defines, variables, module parameters, ...
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+/* Module and version information */
+#define DRV_NAME	"iTCO_vendor_support"
+#define DRV_VERSION	"1.04"
+
+/* Includes */
+#include <linux/module.h>		/* For module specific items */
+#include <linux/moduleparam.h>		/* For new moduleparam's */
+#include <linux/types.h>		/* For standard types (like size_t) */
+#include <linux/errno.h>		/* For the -ENODEV/... values */
+#include <linux/kernel.h>		/* For printk/panic/... */
+#include <linux/init.h>			/* For __init/__exit/... */
+#include <linux/ioport.h>		/* For io-port access */
+#include <linux/io.h>			/* For inb/outb/... */
+
+#include "iTCO_vendor.h"
+
+/* List of vendor support modes */
+/* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */
+#define SUPERMICRO_OLD_BOARD	1
+/* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */
+#define SUPERMICRO_NEW_BOARD	2
+/* Broken BIOS */
+#define BROKEN_BIOS		911
+
+static int vendorsupport;
+module_param(vendorsupport, int, 0);
+MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default="
+			"0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+, "
+							"911=Broken SMI BIOS");
+
+/*
+ *	Vendor Specific Support
+ */
+
+/*
+ *	Vendor Support: 1
+ *	Board: Super Micro Computer Inc. 370SSE+-OEM1/P3TSSE
+ *	iTCO chipset: ICH2
+ *
+ *	Code contributed by: R. Seretny <lkpatches@paypc.com>
+ *	Documentation obtained by R. Seretny from SuperMicro Technical Support
+ *
+ *	To enable Watchdog function:
+ *	    BIOS setup -> Power -> TCO Logic SMI Enable -> Within5Minutes
+ *	    This setting enables SMI to clear the watchdog expired flag.
+ *	    If BIOS or CPU fail which may cause SMI hang, then system will
+ *	    reboot. When application starts to use watchdog function,
+ *	    application has to take over the control from SMI.
+ *
+ *	    For P3TSSE, J36 jumper needs to be removed to enable the Watchdog
+ *	    function.
+ *
+ *	    Note: The system will reboot when Expire Flag is set TWICE.
+ *	    So, if the watchdog timer is 20 seconds, then the maximum hang
+ *	    time is about 40 seconds, and the minimum hang time is about
+ *	    20.6 seconds.
+ */
+
+static void supermicro_old_pre_start(struct resource *smires)
+{
+	unsigned long val32;
+
+	/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+	val32 = inl(smires->start);
+	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
+	outl(val32, smires->start);	/* Needed to activate watchdog */
+}
+
+static void supermicro_old_pre_stop(struct resource *smires)
+{
+	unsigned long val32;
+
+	/* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
+	val32 = inl(smires->start);
+	val32 |= 0x00002000;	/* Turn on SMI clearing watchdog */
+	outl(val32, smires->start);	/* Needed to deactivate watchdog */
+}
+
+/*
+ *	Vendor Support: 2
+ *	Board: Super Micro Computer Inc. P4SBx, P4DPx
+ *	iTCO chipset: ICH4
+ *
+ *	Code contributed by: R. Seretny <lkpatches@paypc.com>
+ *	Documentation obtained by R. Seretny from SuperMicro Technical Support
+ *
+ *	To enable Watchdog function:
+ *	 1. BIOS
+ *	  For P4SBx:
+ *	  BIOS setup -> Advanced -> Integrated Peripherals -> Watch Dog Feature
+ *	  For P4DPx:
+ *	  BIOS setup -> Advanced -> I/O Device Configuration -> Watch Dog
+ *	 This setting enables or disables Watchdog function. When enabled, the
+ *	 default watchdog timer is set to be 5 minutes (about 4m35s). It is
+ *	 enough to load and run the OS. The application (service or driver) has
+ *	 to take over the control once OS is running up and before watchdog
+ *	 expires.
+ *
+ *	 2. JUMPER
+ *	  For P4SBx: JP39
+ *	  For P4DPx: JP37
+ *	  This jumper is used for safety.  Closed is enabled. This jumper
+ *	  prevents user enables watchdog in BIOS by accident.
+ *
+ *	 To enable Watch Dog function, both BIOS and JUMPER must be enabled.
+ *
+ *	The documentation lists motherboards P4SBx and P4DPx series as of
+ *	20-March-2002. However, this code works flawlessly with much newer
+ *	motherboards, such as my X6DHR-8G2 (SuperServer 6014H-82).
+ *
+ *	The original iTCO driver as written does not actually reset the
+ *	watchdog timer on these machines, as a result they reboot after five
+ *	minutes.
+ *
+ *	NOTE: You may leave the Watchdog function disabled in the SuperMicro
+ *	BIOS to avoid a "boot-race"... This driver will enable watchdog
+ *	functionality even if it's disabled in the BIOS once the /dev/watchdog
+ *	file is opened.
+ */
+
+/* I/O Port's */
+#define SM_REGINDEX	0x2e	/* SuperMicro ICH4+ Register Index */
+#define SM_DATAIO	0x2f	/* SuperMicro ICH4+ Register Data I/O */
+
+/* Control Register's */
+#define SM_CTLPAGESW	0x07	/* SuperMicro ICH4+ Control Page Switch */
+#define SM_CTLPAGE	0x08	/* SuperMicro ICH4+ Control Page Num */
+
+#define SM_WATCHENABLE	0x30	/* Watchdog enable: Bit 0: 0=off, 1=on */
+
+#define SM_WATCHPAGE	0x87	/* Watchdog unlock control page */
+
+#define SM_ENDWATCH	0xAA	/* Watchdog lock control page */
+
+#define SM_COUNTMODE	0xf5	/* Watchdog count mode select */
+				/* (Bit 3: 0 = seconds, 1 = minutes */
+
+#define SM_WATCHTIMER	0xf6	/* 8-bits, Watchdog timer counter (RW) */
+
+#define SM_RESETCONTROL	0xf7	/* Watchdog reset control */
+				/* Bit 6: timer is reset by kbd interrupt */
+				/* Bit 7: timer is reset by mouse interrupt */
+
+static void supermicro_new_unlock_watchdog(void)
+{
+	/* Write 0x87 to port 0x2e twice */
+	outb(SM_WATCHPAGE, SM_REGINDEX);
+	outb(SM_WATCHPAGE, SM_REGINDEX);
+	/* Switch to watchdog control page */
+	outb(SM_CTLPAGESW, SM_REGINDEX);
+	outb(SM_CTLPAGE, SM_DATAIO);
+}
+
+static void supermicro_new_lock_watchdog(void)
+{
+	outb(SM_ENDWATCH, SM_REGINDEX);
+}
+
+static void supermicro_new_pre_start(unsigned int heartbeat)
+{
+	unsigned int val;
+
+	supermicro_new_unlock_watchdog();
+
+	/* Watchdog timer setting needs to be in seconds*/
+	outb(SM_COUNTMODE, SM_REGINDEX);
+	val = inb(SM_DATAIO);
+	val &= 0xF7;
+	outb(val, SM_DATAIO);
+
+	/* Write heartbeat interval to WDOG */
+	outb(SM_WATCHTIMER, SM_REGINDEX);
+	outb((heartbeat & 255), SM_DATAIO);
+
+	/* Make sure keyboard/mouse interrupts don't interfere */
+	outb(SM_RESETCONTROL, SM_REGINDEX);
+	val = inb(SM_DATAIO);
+	val &= 0x3f;
+	outb(val, SM_DATAIO);
+
+	/* enable watchdog by setting bit 0 of Watchdog Enable to 1 */
+	outb(SM_WATCHENABLE, SM_REGINDEX);
+	val = inb(SM_DATAIO);
+	val |= 0x01;
+	outb(val, SM_DATAIO);
+
+	supermicro_new_lock_watchdog();
+}
+
+static void supermicro_new_pre_stop(void)
+{
+	unsigned int val;
+
+	supermicro_new_unlock_watchdog();
+
+	/* disable watchdog by setting bit 0 of Watchdog Enable to 0 */
+	outb(SM_WATCHENABLE, SM_REGINDEX);
+	val = inb(SM_DATAIO);
+	val &= 0xFE;
+	outb(val, SM_DATAIO);
+
+	supermicro_new_lock_watchdog();
+}
+
+static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat)
+{
+	supermicro_new_unlock_watchdog();
+
+	/* reset watchdog timeout to heartveat value */
+	outb(SM_WATCHTIMER, SM_REGINDEX);
+	outb((heartbeat & 255), SM_DATAIO);
+
+	supermicro_new_lock_watchdog();
+}
+
+/*
+ *	Vendor Support: 911
+ *	Board: Some Intel ICHx based motherboards
+ *	iTCO chipset: ICH7+
+ *
+ *	Some Intel motherboards have a broken BIOS implementation: i.e.
+ *	the SMI handler clear's the TIMEOUT bit in the TC01_STS register
+ *	and does not reload the time. Thus the TCO watchdog does not reboot
+ *	the system.
+ *
+ *	These are the conclusions of Andriy Gapon <avg@icyb.net.ua> after
+ *	debugging: the SMI handler is quite simple - it tests value in
+ *	TCO1_CNT against 0x800, i.e. checks TCO_TMR_HLT. If the bit is set
+ *	the handler goes into an infinite loop, apparently to allow the
+ *	second timeout and reboot. Otherwise it simply clears TIMEOUT bit
+ *	in TCO1_STS and that's it.
+ *	So the logic seems to be reversed, because it is hard to see how
+ *	TIMEOUT can get set to 1 and SMI generated when TCO_TMR_HLT is set
+ *	(other than a transitional effect).
+ *
+ *	The only fix found to get the motherboard(s) to reboot is to put
+ *	the glb_smi_en bit to 0. This is a dirty hack that bypasses the
+ *	broken code by disabling Global SMI.
+ *
+ *	WARNING: globally disabling SMI could possibly lead to dramatic
+ *	problems, especially on laptops! I.e. various ACPI things where
+ *	SMI is used for communication between OS and firmware.
+ *
+ *	Don't use this fix if you don't need to!!!
+ */
+
+static void broken_bios_start(struct resource *smires)
+{
+	unsigned long val32;
+
+	val32 = inl(smires->start);
+	/* Bit 13: TCO_EN     -> 0 = Disables TCO logic generating an SMI#
+	   Bit  0: GBL_SMI_EN -> 0 = No SMI# will be generated by ICH. */
+	val32 &= 0xffffdffe;
+	outl(val32, smires->start);
+}
+
+static void broken_bios_stop(struct resource *smires)
+{
+	unsigned long val32;
+
+	val32 = inl(smires->start);
+	/* Bit 13: TCO_EN     -> 1 = Enables TCO logic generating an SMI#
+	   Bit  0: GBL_SMI_EN -> 1 = Turn global SMI on again. */
+	val32 |= 0x00002001;
+	outl(val32, smires->start);
+}
+
+/*
+ *	Generic Support Functions
+ */
+
+void iTCO_vendor_pre_start(struct resource *smires,
+			   unsigned int heartbeat)
+{
+	switch (vendorsupport) {
+	case SUPERMICRO_OLD_BOARD:
+		supermicro_old_pre_start(smires);
+		break;
+	case SUPERMICRO_NEW_BOARD:
+		supermicro_new_pre_start(heartbeat);
+		break;
+	case BROKEN_BIOS:
+		broken_bios_start(smires);
+		break;
+	}
+}
+EXPORT_SYMBOL(iTCO_vendor_pre_start);
+
+void iTCO_vendor_pre_stop(struct resource *smires)
+{
+	switch (vendorsupport) {
+	case SUPERMICRO_OLD_BOARD:
+		supermicro_old_pre_stop(smires);
+		break;
+	case SUPERMICRO_NEW_BOARD:
+		supermicro_new_pre_stop();
+		break;
+	case BROKEN_BIOS:
+		broken_bios_stop(smires);
+		break;
+	}
+}
+EXPORT_SYMBOL(iTCO_vendor_pre_stop);
+
+void iTCO_vendor_pre_keepalive(struct resource *smires, unsigned int heartbeat)
+{
+	if (vendorsupport == SUPERMICRO_NEW_BOARD)
+		supermicro_new_pre_set_heartbeat(heartbeat);
+}
+EXPORT_SYMBOL(iTCO_vendor_pre_keepalive);
+
+void iTCO_vendor_pre_set_heartbeat(unsigned int heartbeat)
+{
+	if (vendorsupport == SUPERMICRO_NEW_BOARD)
+		supermicro_new_pre_set_heartbeat(heartbeat);
+}
+EXPORT_SYMBOL(iTCO_vendor_pre_set_heartbeat);
+
+int iTCO_vendor_check_noreboot_on(void)
+{
+	switch (vendorsupport) {
+	case SUPERMICRO_OLD_BOARD:
+		return 0;
+	default:
+		return 1;
+	}
+}
+EXPORT_SYMBOL(iTCO_vendor_check_noreboot_on);
+
+static int __init iTCO_vendor_init_module(void)
+{
+	pr_info("vendor-support=%d\n", vendorsupport);
+	return 0;
+}
+
+static void __exit iTCO_vendor_exit_module(void)
+{
+	pr_info("Module Unloaded\n");
+}
+
+module_init(iTCO_vendor_init_module);
+module_exit(iTCO_vendor_exit_module);
+
+MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>, "
+		"R. Seretny <lkpatches@paypc.com>");
+MODULE_DESCRIPTION("Intel TCO Vendor Specific WatchDog Timer Driver Support");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
new file mode 100644
index 000000000..347f0389b
--- /dev/null
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -0,0 +1,654 @@
+/*
+ *	intel TCO Watchdog Driver
+ *
+ *	(c) Copyright 2006-2011 Wim Van Sebroeck <wim@iguana.be>.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
+ *	provide warranty for any of this software. This material is
+ *	provided "AS-IS" and at no charge.
+ *
+ *	The TCO watchdog is implemented in the following I/O controller hubs:
+ *	(See the intel documentation on http://developer.intel.com.)
+ *	document number 290655-003, 290677-014: 82801AA (ICH), 82801AB (ICHO)
+ *	document number 290687-002, 298242-027: 82801BA (ICH2)
+ *	document number 290733-003, 290739-013: 82801CA (ICH3-S)
+ *	document number 290716-001, 290718-007: 82801CAM (ICH3-M)
+ *	document number 290744-001, 290745-025: 82801DB (ICH4)
+ *	document number 252337-001, 252663-008: 82801DBM (ICH4-M)
+ *	document number 273599-001, 273645-002: 82801E (C-ICH)
+ *	document number 252516-001, 252517-028: 82801EB (ICH5), 82801ER (ICH5R)
+ *	document number 300641-004, 300884-013: 6300ESB
+ *	document number 301473-002, 301474-026: 82801F (ICH6)
+ *	document number 313082-001, 313075-006: 631xESB, 632xESB
+ *	document number 307013-003, 307014-024: 82801G (ICH7)
+ *	document number 322896-001, 322897-001: NM10
+ *	document number 313056-003, 313057-017: 82801H (ICH8)
+ *	document number 316972-004, 316973-012: 82801I (ICH9)
+ *	document number 319973-002, 319974-002: 82801J (ICH10)
+ *	document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH)
+ *	document number 320066-003, 320257-008: EP80597 (IICH)
+ *	document number 324645-001, 324646-001: Cougar Point (CPT)
+ *	document number TBD                   : Patsburg (PBG)
+ *	document number TBD                   : DH89xxCC
+ *	document number TBD                   : Panther Point
+ *	document number TBD                   : Lynx Point
+ *	document number TBD                   : Lynx Point-LP
+ */
+
+/*
+ *	Includes, defines, variables, module parameters, ...
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+/* Module and version information */
+#define DRV_NAME	"iTCO_wdt"
+#define DRV_VERSION	"1.11"
+
+/* Includes */
+#include <linux/acpi.h>			/* For ACPI support */
+#include <linux/module.h>		/* For module specific items */
+#include <linux/moduleparam.h>		/* For new moduleparam's */
+#include <linux/types.h>		/* For standard types (like size_t) */
+#include <linux/errno.h>		/* For the -ENODEV/... values */
+#include <linux/kernel.h>		/* For printk/panic/... */
+#include <linux/watchdog.h>		/* For the watchdog specific items */
+#include <linux/init.h>			/* For __init/__exit/... */
+#include <linux/fs.h>			/* For file operations */
+#include <linux/platform_device.h>	/* For platform_driver framework */
+#include <linux/pci.h>			/* For pci functions */
+#include <linux/ioport.h>		/* For io-port access */
+#include <linux/spinlock.h>		/* For spin_lock/spin_unlock/... */
+#include <linux/uaccess.h>		/* For copy_to_user/put_user/... */
+#include <linux/io.h>			/* For inb/outb/... */
+#include <linux/platform_data/itco_wdt.h>
+
+#include "iTCO_vendor.h"
+
+/* Address definitions for the TCO */
+/* TCO base address */
+#define TCOBASE(p)	((p)->tco_res->start)
+/* SMI Control and Enable Register */
+#define SMI_EN(p)	((p)->smi_res->start)
+
+#define TCO_RLD(p)	(TCOBASE(p) + 0x00) /* TCO Timer Reload/Curr. Value */
+#define TCOv1_TMR(p)	(TCOBASE(p) + 0x01) /* TCOv1 Timer Initial Value*/
+#define TCO_DAT_IN(p)	(TCOBASE(p) + 0x02) /* TCO Data In Register	*/
+#define TCO_DAT_OUT(p)	(TCOBASE(p) + 0x03) /* TCO Data Out Register	*/
+#define TCO1_STS(p)	(TCOBASE(p) + 0x04) /* TCO1 Status Register	*/
+#define TCO2_STS(p)	(TCOBASE(p) + 0x06) /* TCO2 Status Register	*/
+#define TCO1_CNT(p)	(TCOBASE(p) + 0x08) /* TCO1 Control Register	*/
+#define TCO2_CNT(p)	(TCOBASE(p) + 0x0a) /* TCO2 Control Register	*/
+#define TCOv2_TMR(p)	(TCOBASE(p) + 0x12) /* TCOv2 Timer Initial Value*/
+
+/* internal variables */
+struct iTCO_wdt_private {
+	struct watchdog_device wddev;
+
+	/* TCO version/generation */
+	unsigned int iTCO_version;
+	struct resource *tco_res;
+	struct resource *smi_res;
+	/*
+	 * NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2),
+	 * or memory-mapped PMC register bit 4 (TCO version 3).
+	 */
+	struct resource *gcs_pmc_res;
+	unsigned long __iomem *gcs_pmc;
+	/* the lock for io operations */
+	spinlock_t io_lock;
+	/* the PCI-device */
+	struct pci_dev *pci_dev;
+	/* whether or not the watchdog has been suspended */
+	bool suspended;
+	/* no reboot API private data */
+	void *no_reboot_priv;
+	/* no reboot update function pointer */
+	int (*update_no_reboot_bit)(void *p, bool set);
+};
+
+/* module parameters */
+#define WATCHDOG_TIMEOUT 30	/* 30 sec default heartbeat */
+static int heartbeat = WATCHDOG_TIMEOUT;  /* in seconds */
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog timeout in seconds. "
+	"5..76 (TCO v1) or 3..614 (TCO v2), default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int turn_SMI_watchdog_clear_off = 1;
+module_param(turn_SMI_watchdog_clear_off, int, 0);
+MODULE_PARM_DESC(turn_SMI_watchdog_clear_off,
+	"Turn off SMI clearing watchdog (depends on TCO-version)(default=1)");
+
+/*
+ * Some TCO specific functions
+ */
+
+/*
+ * The iTCO v1 and v2's internal timer is stored as ticks which decrement
+ * every 0.6 seconds.  v3's internal timer is stored as seconds (some
+ * datasheets incorrectly state 0.6 seconds).
+ */
+static inline unsigned int seconds_to_ticks(struct iTCO_wdt_private *p,
+					    int secs)
+{
+	return p->iTCO_version == 3 ? secs : (secs * 10) / 6;
+}
+
+static inline unsigned int ticks_to_seconds(struct iTCO_wdt_private *p,
+					    int ticks)
+{
+	return p->iTCO_version == 3 ? ticks : (ticks * 6) / 10;
+}
+
+static inline u32 no_reboot_bit(struct iTCO_wdt_private *p)
+{
+	u32 enable_bit;
+
+	switch (p->iTCO_version) {
+	case 5:
+	case 3:
+		enable_bit = 0x00000010;
+		break;
+	case 2:
+		enable_bit = 0x00000020;
+		break;
+	case 4:
+	case 1:
+	default:
+		enable_bit = 0x00000002;
+		break;
+	}
+
+	return enable_bit;
+}
+
+static int update_no_reboot_bit_def(void *priv, bool set)
+{
+	return 0;
+}
+
+static int update_no_reboot_bit_pci(void *priv, bool set)
+{
+	struct iTCO_wdt_private *p = priv;
+	u32 val32 = 0, newval32 = 0;
+
+	pci_read_config_dword(p->pci_dev, 0xd4, &val32);
+	if (set)
+		val32 |= no_reboot_bit(p);
+	else
+		val32 &= ~no_reboot_bit(p);
+	pci_write_config_dword(p->pci_dev, 0xd4, val32);
+	pci_read_config_dword(p->pci_dev, 0xd4, &newval32);
+
+	/* make sure the update is successful */
+	if (val32 != newval32)
+		return -EIO;
+
+	return 0;
+}
+
+static int update_no_reboot_bit_mem(void *priv, bool set)
+{
+	struct iTCO_wdt_private *p = priv;
+	u32 val32 = 0, newval32 = 0;
+
+	val32 = readl(p->gcs_pmc);
+	if (set)
+		val32 |= no_reboot_bit(p);
+	else
+		val32 &= ~no_reboot_bit(p);
+	writel(val32, p->gcs_pmc);
+	newval32 = readl(p->gcs_pmc);
+
+	/* make sure the update is successful */
+	if (val32 != newval32)
+		return -EIO;
+
+	return 0;
+}
+
+static void iTCO_wdt_no_reboot_bit_setup(struct iTCO_wdt_private *p,
+		struct itco_wdt_platform_data *pdata)
+{
+	if (pdata->update_no_reboot_bit) {
+		p->update_no_reboot_bit = pdata->update_no_reboot_bit;
+		p->no_reboot_priv = pdata->no_reboot_priv;
+		return;
+	}
+
+	if (p->iTCO_version >= 2)
+		p->update_no_reboot_bit = update_no_reboot_bit_mem;
+	else if (p->iTCO_version == 1)
+		p->update_no_reboot_bit = update_no_reboot_bit_pci;
+	else
+		p->update_no_reboot_bit = update_no_reboot_bit_def;
+
+	p->no_reboot_priv = p;
+}
+
+static int iTCO_wdt_start(struct watchdog_device *wd_dev)
+{
+	struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev);
+	unsigned int val;
+
+	spin_lock(&p->io_lock);
+
+	iTCO_vendor_pre_start(p->smi_res, wd_dev->timeout);
+
+	/* disable chipset's NO_REBOOT bit */
+	if (p->update_no_reboot_bit(p->no_reboot_priv, false)) {
+		spin_unlock(&p->io_lock);
+		pr_err("failed to reset NO_REBOOT flag, reboot disabled by hardware/BIOS\n");
+		return -EIO;
+	}
+
+	/* Force the timer to its reload value by writing to the TCO_RLD
+	   register */
+	if (p->iTCO_version >= 2)
+		outw(0x01, TCO_RLD(p));
+	else if (p->iTCO_version == 1)
+		outb(0x01, TCO_RLD(p));
+
+	/* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */
+	val = inw(TCO1_CNT(p));
+	val &= 0xf7ff;
+	outw(val, TCO1_CNT(p));
+	val = inw(TCO1_CNT(p));
+	spin_unlock(&p->io_lock);
+
+	if (val & 0x0800)
+		return -1;
+	return 0;
+}
+
+static int iTCO_wdt_stop(struct watchdog_device *wd_dev)
+{
+	struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev);
+	unsigned int val;
+
+	spin_lock(&p->io_lock);
+
+	iTCO_vendor_pre_stop(p->smi_res);
+
+	/* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */
+	val = inw(TCO1_CNT(p));
+	val |= 0x0800;
+	outw(val, TCO1_CNT(p));
+	val = inw(TCO1_CNT(p));
+
+	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
+	p->update_no_reboot_bit(p->no_reboot_priv, true);
+
+	spin_unlock(&p->io_lock);
+
+	if ((val & 0x0800) == 0)
+		return -1;
+	return 0;
+}
+
+static int iTCO_wdt_ping(struct watchdog_device *wd_dev)
+{
+	struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev);
+
+	spin_lock(&p->io_lock);
+
+	iTCO_vendor_pre_keepalive(p->smi_res, wd_dev->timeout);
+
+	/* Reload the timer by writing to the TCO Timer Counter register */
+	if (p->iTCO_version >= 2) {
+		outw(0x01, TCO_RLD(p));
+	} else if (p->iTCO_version == 1) {
+		/* Reset the timeout status bit so that the timer
+		 * needs to count down twice again before rebooting */
+		outw(0x0008, TCO1_STS(p));	/* write 1 to clear bit */
+
+		outb(0x01, TCO_RLD(p));
+	}
+
+	spin_unlock(&p->io_lock);
+	return 0;
+}
+
+static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t)
+{
+	struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev);
+	unsigned int val16;
+	unsigned char val8;
+	unsigned int tmrval;
+
+	tmrval = seconds_to_ticks(p, t);
+
+	/* For TCO v1 the timer counts down twice before rebooting */
+	if (p->iTCO_version == 1)
+		tmrval /= 2;
+
+	/* from the specs: */
+	/* "Values of 0h-3h are ignored and should not be attempted" */
+	if (tmrval < 0x04)
+		return -EINVAL;
+	if ((p->iTCO_version >= 2 && tmrval > 0x3ff) ||
+	    (p->iTCO_version == 1 && tmrval > 0x03f))
+		return -EINVAL;
+
+	iTCO_vendor_pre_set_heartbeat(tmrval);
+
+	/* Write new heartbeat to watchdog */
+	if (p->iTCO_version >= 2) {
+		spin_lock(&p->io_lock);
+		val16 = inw(TCOv2_TMR(p));
+		val16 &= 0xfc00;
+		val16 |= tmrval;
+		outw(val16, TCOv2_TMR(p));
+		val16 = inw(TCOv2_TMR(p));
+		spin_unlock(&p->io_lock);
+
+		if ((val16 & 0x3ff) != tmrval)
+			return -EINVAL;
+	} else if (p->iTCO_version == 1) {
+		spin_lock(&p->io_lock);
+		val8 = inb(TCOv1_TMR(p));
+		val8 &= 0xc0;
+		val8 |= (tmrval & 0xff);
+		outb(val8, TCOv1_TMR(p));
+		val8 = inb(TCOv1_TMR(p));
+		spin_unlock(&p->io_lock);
+
+		if ((val8 & 0x3f) != tmrval)
+			return -EINVAL;
+	}
+
+	wd_dev->timeout = t;
+	return 0;
+}
+
+static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev)
+{
+	struct iTCO_wdt_private *p = watchdog_get_drvdata(wd_dev);
+	unsigned int val16;
+	unsigned char val8;
+	unsigned int time_left = 0;
+
+	/* read the TCO Timer */
+	if (p->iTCO_version >= 2) {
+		spin_lock(&p->io_lock);
+		val16 = inw(TCO_RLD(p));
+		val16 &= 0x3ff;
+		spin_unlock(&p->io_lock);
+
+		time_left = ticks_to_seconds(p, val16);
+	} else if (p->iTCO_version == 1) {
+		spin_lock(&p->io_lock);
+		val8 = inb(TCO_RLD(p));
+		val8 &= 0x3f;
+		if (!(inw(TCO1_STS(p)) & 0x0008))
+			val8 += (inb(TCOv1_TMR(p)) & 0x3f);
+		spin_unlock(&p->io_lock);
+
+		time_left = ticks_to_seconds(p, val8);
+	}
+	return time_left;
+}
+
+/*
+ *	Kernel Interfaces
+ */
+
+static const struct watchdog_info ident = {
+	.options =		WDIOF_SETTIMEOUT |
+				WDIOF_KEEPALIVEPING |
+				WDIOF_MAGICCLOSE,
+	.firmware_version =	0,
+	.identity =		DRV_NAME,
+};
+
+static const struct watchdog_ops iTCO_wdt_ops = {
+	.owner =		THIS_MODULE,
+	.start =		iTCO_wdt_start,
+	.stop =			iTCO_wdt_stop,
+	.ping =			iTCO_wdt_ping,
+	.set_timeout =		iTCO_wdt_set_timeout,
+	.get_timeleft =		iTCO_wdt_get_timeleft,
+};
+
+/*
+ *	Init & exit routines
+ */
+
+static int iTCO_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct itco_wdt_platform_data *pdata = dev_get_platdata(dev);
+	struct iTCO_wdt_private *p;
+	unsigned long val32;
+	int ret;
+
+	if (!pdata)
+		return -ENODEV;
+
+	p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	spin_lock_init(&p->io_lock);
+
+	p->tco_res = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_IO_TCO);
+	if (!p->tco_res)
+		return -ENODEV;
+
+	p->smi_res = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_IO_SMI);
+	if (!p->smi_res)
+		return -ENODEV;
+
+	p->iTCO_version = pdata->version;
+	p->pci_dev = to_pci_dev(dev->parent);
+
+	iTCO_wdt_no_reboot_bit_setup(p, pdata);
+
+	/*
+	 * Get the Memory-Mapped GCS or PMC register, we need it for the
+	 * NO_REBOOT flag (TCO v2 and v3).
+	 */
+	if (p->iTCO_version >= 2 && !pdata->update_no_reboot_bit) {
+		p->gcs_pmc_res = platform_get_resource(pdev,
+						       IORESOURCE_MEM,
+						       ICH_RES_MEM_GCS_PMC);
+		p->gcs_pmc = devm_ioremap_resource(dev, p->gcs_pmc_res);
+		if (IS_ERR(p->gcs_pmc))
+			return PTR_ERR(p->gcs_pmc);
+	}
+
+	/* Check chipset's NO_REBOOT bit */
+	if (p->update_no_reboot_bit(p->no_reboot_priv, false) &&
+	    iTCO_vendor_check_noreboot_on()) {
+		pr_info("unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n");
+		return -ENODEV;	/* Cannot reset NO_REBOOT bit */
+	}
+
+	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
+	p->update_no_reboot_bit(p->no_reboot_priv, true);
+
+	/* The TCO logic uses the TCO_EN bit in the SMI_EN register */
+	if (!devm_request_region(dev, p->smi_res->start,
+				 resource_size(p->smi_res),
+				 pdev->name)) {
+		pr_err("I/O address 0x%04llx already in use, device disabled\n",
+		       (u64)SMI_EN(p));
+		return -EBUSY;
+	}
+	if (turn_SMI_watchdog_clear_off >= p->iTCO_version) {
+		/*
+		 * Bit 13: TCO_EN -> 0
+		 * Disables TCO logic generating an SMI#
+		 */
+		val32 = inl(SMI_EN(p));
+		val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
+		outl(val32, SMI_EN(p));
+	}
+
+	if (!devm_request_region(dev, p->tco_res->start,
+				 resource_size(p->tco_res),
+				 pdev->name)) {
+		pr_err("I/O address 0x%04llx already in use, device disabled\n",
+		       (u64)TCOBASE(p));
+		return -EBUSY;
+	}
+
+	pr_info("Found a %s TCO device (Version=%d, TCOBASE=0x%04llx)\n",
+		pdata->name, pdata->version, (u64)TCOBASE(p));
+
+	/* Clear out the (probably old) status */
+	switch (p->iTCO_version) {
+	case 5:
+	case 4:
+		outw(0x0008, TCO1_STS(p)); /* Clear the Time Out Status bit */
+		outw(0x0002, TCO2_STS(p)); /* Clear SECOND_TO_STS bit */
+		break;
+	case 3:
+		outl(0x20008, TCO1_STS(p));
+		break;
+	case 2:
+	case 1:
+	default:
+		outw(0x0008, TCO1_STS(p)); /* Clear the Time Out Status bit */
+		outw(0x0002, TCO2_STS(p)); /* Clear SECOND_TO_STS bit */
+		outw(0x0004, TCO2_STS(p)); /* Clear BOOT_STS bit */
+		break;
+	}
+
+	p->wddev.info =	&ident,
+	p->wddev.ops = &iTCO_wdt_ops,
+	p->wddev.bootstatus = 0;
+	p->wddev.timeout = WATCHDOG_TIMEOUT;
+	watchdog_set_nowayout(&p->wddev, nowayout);
+	p->wddev.parent = dev;
+
+	watchdog_set_drvdata(&p->wddev, p);
+	platform_set_drvdata(pdev, p);
+
+	/* Make sure the watchdog is not running */
+	iTCO_wdt_stop(&p->wddev);
+
+	/* Check that the heartbeat value is within it's range;
+	   if not reset to the default */
+	if (iTCO_wdt_set_timeout(&p->wddev, heartbeat)) {
+		iTCO_wdt_set_timeout(&p->wddev, WATCHDOG_TIMEOUT);
+		pr_info("timeout value out of range, using %d\n",
+			WATCHDOG_TIMEOUT);
+	}
+
+	watchdog_stop_on_reboot(&p->wddev);
+	ret = devm_watchdog_register_device(dev, &p->wddev);
+	if (ret != 0) {
+		pr_err("cannot register watchdog device (err=%d)\n", ret);
+		return ret;
+	}
+
+	pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n",
+		heartbeat, nowayout);
+
+	return 0;
+}
+
+static int iTCO_wdt_remove(struct platform_device *pdev)
+{
+	struct iTCO_wdt_private *p = platform_get_drvdata(pdev);
+
+	/* Stop the timer before we leave */
+	if (!nowayout)
+		iTCO_wdt_stop(&p->wddev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+/*
+ * Suspend-to-idle requires this, because it stops the ticks and timekeeping, so
+ * the watchdog cannot be pinged while in that state.  In ACPI sleep states the
+ * watchdog is stopped by the platform firmware.
+ */
+
+#ifdef CONFIG_ACPI
+static inline bool need_suspend(void)
+{
+	return acpi_target_system_state() == ACPI_STATE_S0;
+}
+#else
+static inline bool need_suspend(void) { return true; }
+#endif
+
+static int iTCO_wdt_suspend_noirq(struct device *dev)
+{
+	struct iTCO_wdt_private *p = dev_get_drvdata(dev);
+	int ret = 0;
+
+	p->suspended = false;
+	if (watchdog_active(&p->wddev) && need_suspend()) {
+		ret = iTCO_wdt_stop(&p->wddev);
+		if (!ret)
+			p->suspended = true;
+	}
+	return ret;
+}
+
+static int iTCO_wdt_resume_noirq(struct device *dev)
+{
+	struct iTCO_wdt_private *p = dev_get_drvdata(dev);
+
+	if (p->suspended)
+		iTCO_wdt_start(&p->wddev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops iTCO_wdt_pm = {
+	.suspend_noirq = iTCO_wdt_suspend_noirq,
+	.resume_noirq = iTCO_wdt_resume_noirq,
+};
+
+#define ITCO_WDT_PM_OPS	(&iTCO_wdt_pm)
+#else
+#define ITCO_WDT_PM_OPS	NULL
+#endif /* CONFIG_PM_SLEEP */
+
+static struct platform_driver iTCO_wdt_driver = {
+	.probe          = iTCO_wdt_probe,
+	.remove         = iTCO_wdt_remove,
+	.driver         = {
+		.name   = DRV_NAME,
+		.pm     = ITCO_WDT_PM_OPS,
+	},
+};
+
+static int __init iTCO_wdt_init_module(void)
+{
+	pr_info("Intel TCO WatchDog Timer Driver v%s\n", DRV_VERSION);
+
+	return platform_driver_register(&iTCO_wdt_driver);
+}
+
+static void __exit iTCO_wdt_cleanup_module(void)
+{
+	platform_driver_unregister(&iTCO_wdt_driver);
+	pr_info("Watchdog Module Unloaded\n");
+}
+
+module_init(iTCO_wdt_init_module);
+module_exit(iTCO_wdt_cleanup_module);
+
+MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>");
+MODULE_DESCRIPTION("Intel TCO WatchDog Timer Driver");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c
new file mode 100644
index 000000000..cc262284a
--- /dev/null
+++ b/drivers/watchdog/ib700wdt.c
@@ -0,0 +1,382 @@
+/*
+ *	IB700 Single Board Computer WDT driver
+ *
+ *	(c) Copyright 2001 Charles Howes <chowes@vsol.net>
+ *
+ *	Based on advantechwdt.c which is based on acquirewdt.c which
+ *	is based on wdt.c.
+ *
+ *	(c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
+ *
+ *	Based on acquirewdt.c which is based on wdt.c.
+ *	Original copyright messages:
+ *
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ *	warranty for any of this software. This material is provided
+ *	"AS-IS" and at no charge.
+ *
+ *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ *	14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
+ *	     Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
+ *	     Added timeout module option to override default
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/ioport.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+
+static struct platform_device *ibwdt_platform_device;
+static unsigned long ibwdt_is_open;
+static DEFINE_SPINLOCK(ibwdt_lock);
+static char expect_close;
+
+/* Module information */
+#define DRV_NAME "ib700wdt"
+
+/*
+ *
+ * Watchdog Timer Configuration
+ *
+ * The function of the watchdog timer is to reset the system
+ * automatically and is defined at I/O port 0443H.  To enable the
+ * watchdog timer and allow the system to reset, write I/O port 0443H.
+ * To disable the timer, write I/O port 0441H for the system to stop the
+ * watchdog function.  The timer has a tolerance of 20% for its
+ * intervals.
+ *
+ * The following describes how the timer should be programmed.
+ *
+ * Enabling Watchdog:
+ * MOV AX,000FH (Choose the values from 0 to F)
+ * MOV DX,0443H
+ * OUT DX,AX
+ *
+ * Disabling Watchdog:
+ * MOV AX,000FH (Any value is fine.)
+ * MOV DX,0441H
+ * OUT DX,AX
+ *
+ * Watchdog timer control table:
+ * Level   Value  Time/sec | Level Value Time/sec
+ *   1       F       0     |   9     7      16
+ *   2       E       2     |   10    6      18
+ *   3       D       4     |   11    5      20
+ *   4       C       6     |   12    4      22
+ *   5       B       8     |   13    3      24
+ *   6       A       10    |   14    2      26
+ *   7       9       12    |   15    1      28
+ *   8       8       14    |   16    0      30
+ *
+ */
+
+#define WDT_STOP 0x441
+#define WDT_START 0x443
+
+/* Default timeout */
+#define WATCHDOG_TIMEOUT 30		/* 30 seconds +/- 20% */
+static int timeout = WATCHDOG_TIMEOUT;	/* in seconds */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. 0<= timeout <=30, default="
+		__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+
+/*
+ *	Watchdog Operations
+ */
+
+static void ibwdt_ping(void)
+{
+	int wd_margin = 15 - ((timeout + 1) / 2);
+
+	spin_lock(&ibwdt_lock);
+
+	/* Write a watchdog value */
+	outb_p(wd_margin, WDT_START);
+
+	spin_unlock(&ibwdt_lock);
+}
+
+static void ibwdt_disable(void)
+{
+	spin_lock(&ibwdt_lock);
+	outb_p(0, WDT_STOP);
+	spin_unlock(&ibwdt_lock);
+}
+
+static int ibwdt_set_heartbeat(int t)
+{
+	if (t < 0 || t > 30)
+		return -EINVAL;
+
+	timeout = t;
+	return 0;
+}
+
+/*
+ *	/dev/watchdog handling
+ */
+
+static ssize_t ibwdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
+{
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			expect_close = 0;
+
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+		ibwdt_ping();
+	}
+	return count;
+}
+
+static long ibwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	int new_margin;
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
+							| WDIOF_MAGICCLOSE,
+		.firmware_version = 1,
+		.identity = "IB700 WDT",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_SETOPTIONS:
+	{
+		int options, retval = -EINVAL;
+
+		if (get_user(options, p))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD) {
+			ibwdt_disable();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			ibwdt_ping();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		ibwdt_ping();
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_margin, p))
+			return -EFAULT;
+		if (ibwdt_set_heartbeat(new_margin))
+			return -EINVAL;
+		ibwdt_ping();
+		/* fall through */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+
+	default:
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+static int ibwdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &ibwdt_is_open))
+		return -EBUSY;
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	/* Activate */
+	ibwdt_ping();
+	return nonseekable_open(inode, file);
+}
+
+static int ibwdt_close(struct inode *inode, struct file *file)
+{
+	if (expect_close == 42) {
+		ibwdt_disable();
+	} else {
+		pr_crit("WDT device closed unexpectedly.  WDT will not stop!\n");
+		ibwdt_ping();
+	}
+	clear_bit(0, &ibwdt_is_open);
+	expect_close = 0;
+	return 0;
+}
+
+/*
+ *	Kernel Interfaces
+ */
+
+static const struct file_operations ibwdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= ibwdt_write,
+	.unlocked_ioctl	= ibwdt_ioctl,
+	.open		= ibwdt_open,
+	.release	= ibwdt_close,
+};
+
+static struct miscdevice ibwdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &ibwdt_fops,
+};
+
+/*
+ *	Init & exit routines
+ */
+
+static int __init ibwdt_probe(struct platform_device *dev)
+{
+	int res;
+
+#if WDT_START != WDT_STOP
+	if (!request_region(WDT_STOP, 1, "IB700 WDT")) {
+		pr_err("STOP method I/O %X is not available\n", WDT_STOP);
+		res = -EIO;
+		goto out_nostopreg;
+	}
+#endif
+
+	if (!request_region(WDT_START, 1, "IB700 WDT")) {
+		pr_err("START method I/O %X is not available\n", WDT_START);
+		res = -EIO;
+		goto out_nostartreg;
+	}
+
+	/* Check that the heartbeat value is within it's range ;
+	 * if not reset to the default */
+	if (ibwdt_set_heartbeat(timeout)) {
+		ibwdt_set_heartbeat(WATCHDOG_TIMEOUT);
+		pr_info("timeout value must be 0<=x<=30, using %d\n", timeout);
+	}
+
+	res = misc_register(&ibwdt_miscdev);
+	if (res) {
+		pr_err("failed to register misc device\n");
+		goto out_nomisc;
+	}
+	return 0;
+
+out_nomisc:
+	release_region(WDT_START, 1);
+out_nostartreg:
+#if WDT_START != WDT_STOP
+	release_region(WDT_STOP, 1);
+#endif
+out_nostopreg:
+	return res;
+}
+
+static int ibwdt_remove(struct platform_device *dev)
+{
+	misc_deregister(&ibwdt_miscdev);
+	release_region(WDT_START, 1);
+#if WDT_START != WDT_STOP
+	release_region(WDT_STOP, 1);
+#endif
+	return 0;
+}
+
+static void ibwdt_shutdown(struct platform_device *dev)
+{
+	/* Turn the WDT off if we have a soft shutdown */
+	ibwdt_disable();
+}
+
+static struct platform_driver ibwdt_driver = {
+	.remove		= ibwdt_remove,
+	.shutdown	= ibwdt_shutdown,
+	.driver		= {
+		.name	= DRV_NAME,
+	},
+};
+
+static int __init ibwdt_init(void)
+{
+	int err;
+
+	pr_info("WDT driver for IB700 single board computer initialising\n");
+
+	ibwdt_platform_device = platform_device_register_simple(DRV_NAME,
+								-1, NULL, 0);
+	if (IS_ERR(ibwdt_platform_device))
+		return PTR_ERR(ibwdt_platform_device);
+
+	err = platform_driver_probe(&ibwdt_driver, ibwdt_probe);
+	if (err)
+		goto unreg_platform_device;
+
+	return 0;
+
+unreg_platform_device:
+	platform_device_unregister(ibwdt_platform_device);
+	return err;
+}
+
+static void __exit ibwdt_exit(void)
+{
+	platform_device_unregister(ibwdt_platform_device);
+	platform_driver_unregister(&ibwdt_driver);
+	pr_info("Watchdog Module Unloaded\n");
+}
+
+module_init(ibwdt_init);
+module_exit(ibwdt_exit);
+
+MODULE_AUTHOR("Charles Howes <chowes@vsol.net>");
+MODULE_DESCRIPTION("IB700 SBC watchdog driver");
+MODULE_LICENSE("GPL");
+
+/* end of ib700wdt.c */
diff --git a/drivers/watchdog/ibmasr.c b/drivers/watchdog/ibmasr.c
new file mode 100644
index 000000000..366b0474f
--- /dev/null
+++ b/drivers/watchdog/ibmasr.c
@@ -0,0 +1,421 @@
+/*
+ * IBM Automatic Server Restart driver.
+ *
+ * Copyright (c) 2005 Andrey Panin <pazke@donpac.ru>
+ *
+ * Based on driver written by Pete Reynolds.
+ * Copyright (c) IBM Corporation, 1998-2004.
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU Public License, incorporated herein by reference.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/timer.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/dmi.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+
+enum {
+	ASMTYPE_UNKNOWN,
+	ASMTYPE_TOPAZ,
+	ASMTYPE_JASPER,
+	ASMTYPE_PEARL,
+	ASMTYPE_JUNIPER,
+	ASMTYPE_SPRUCE,
+};
+
+#define TOPAZ_ASR_REG_OFFSET	4
+#define TOPAZ_ASR_TOGGLE	0x40
+#define TOPAZ_ASR_DISABLE	0x80
+
+/* PEARL ASR S/W REGISTER SUPERIO PORT ADDRESSES */
+#define PEARL_BASE	0xe04
+#define PEARL_WRITE	0xe06
+#define PEARL_READ	0xe07
+
+#define PEARL_ASR_DISABLE_MASK	0x80	/* bit 7: disable = 1, enable = 0 */
+#define PEARL_ASR_TOGGLE_MASK	0x40	/* bit 6: 0, then 1, then 0 */
+
+/* JASPER OFFSET FROM SIO BASE ADDR TO ASR S/W REGISTERS. */
+#define JASPER_ASR_REG_OFFSET	0x38
+
+#define JASPER_ASR_DISABLE_MASK	0x01	/* bit 0: disable = 1, enable = 0 */
+#define JASPER_ASR_TOGGLE_MASK	0x02	/* bit 1: 0, then 1, then 0 */
+
+#define JUNIPER_BASE_ADDRESS	0x54b	/* Base address of Juniper ASR */
+#define JUNIPER_ASR_DISABLE_MASK 0x01	/* bit 0: disable = 1 enable = 0 */
+#define JUNIPER_ASR_TOGGLE_MASK	0x02	/* bit 1: 0, then 1, then 0 */
+
+#define SPRUCE_BASE_ADDRESS	0x118e	/* Base address of Spruce ASR */
+#define SPRUCE_ASR_DISABLE_MASK	0x01	/* bit 1: disable = 1 enable = 0 */
+#define SPRUCE_ASR_TOGGLE_MASK	0x02	/* bit 0: 0, then 1, then 0 */
+
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+static unsigned long asr_is_open;
+static char asr_expect_close;
+
+static unsigned int asr_type, asr_base, asr_length;
+static unsigned int asr_read_addr, asr_write_addr;
+static unsigned char asr_toggle_mask, asr_disable_mask;
+static DEFINE_SPINLOCK(asr_lock);
+
+static void __asr_toggle(void)
+{
+	unsigned char reg;
+
+	reg = inb(asr_read_addr);
+
+	outb(reg & ~asr_toggle_mask, asr_write_addr);
+	reg = inb(asr_read_addr);
+
+	outb(reg | asr_toggle_mask, asr_write_addr);
+	reg = inb(asr_read_addr);
+
+	outb(reg & ~asr_toggle_mask, asr_write_addr);
+	reg = inb(asr_read_addr);
+}
+
+static void asr_toggle(void)
+{
+	spin_lock(&asr_lock);
+	__asr_toggle();
+	spin_unlock(&asr_lock);
+}
+
+static void asr_enable(void)
+{
+	unsigned char reg;
+
+	spin_lock(&asr_lock);
+	if (asr_type == ASMTYPE_TOPAZ) {
+		/* asr_write_addr == asr_read_addr */
+		reg = inb(asr_read_addr);
+		outb(reg & ~(TOPAZ_ASR_TOGGLE | TOPAZ_ASR_DISABLE),
+		     asr_read_addr);
+	} else {
+		/*
+		 * First make sure the hardware timer is reset by toggling
+		 * ASR hardware timer line.
+		 */
+		__asr_toggle();
+
+		reg = inb(asr_read_addr);
+		outb(reg & ~asr_disable_mask, asr_write_addr);
+	}
+	reg = inb(asr_read_addr);
+	spin_unlock(&asr_lock);
+}
+
+static void asr_disable(void)
+{
+	unsigned char reg;
+
+	spin_lock(&asr_lock);
+	reg = inb(asr_read_addr);
+
+	if (asr_type == ASMTYPE_TOPAZ)
+		/* asr_write_addr == asr_read_addr */
+		outb(reg | TOPAZ_ASR_TOGGLE | TOPAZ_ASR_DISABLE,
+		     asr_read_addr);
+	else {
+		outb(reg | asr_toggle_mask, asr_write_addr);
+		reg = inb(asr_read_addr);
+
+		outb(reg | asr_disable_mask, asr_write_addr);
+	}
+	reg = inb(asr_read_addr);
+	spin_unlock(&asr_lock);
+}
+
+static int __init asr_get_base_address(void)
+{
+	unsigned char low, high;
+	const char *type = "";
+
+	asr_length = 1;
+
+	switch (asr_type) {
+	case ASMTYPE_TOPAZ:
+		/* SELECT SuperIO CHIP FOR QUERYING
+		   (WRITE 0x07 TO BOTH 0x2E and 0x2F) */
+		outb(0x07, 0x2e);
+		outb(0x07, 0x2f);
+
+		/* SELECT AND READ THE HIGH-NIBBLE OF THE GPIO BASE ADDRESS */
+		outb(0x60, 0x2e);
+		high = inb(0x2f);
+
+		/* SELECT AND READ THE LOW-NIBBLE OF THE GPIO BASE ADDRESS */
+		outb(0x61, 0x2e);
+		low = inb(0x2f);
+
+		asr_base = (high << 16) | low;
+		asr_read_addr = asr_write_addr =
+			asr_base + TOPAZ_ASR_REG_OFFSET;
+		asr_length = 5;
+
+		break;
+
+	case ASMTYPE_JASPER:
+		type = "Jaspers ";
+#if 0
+		u32 r;
+		/* Suggested fix */
+		pdev = pci_get_bus_and_slot(0, DEVFN(0x1f, 0));
+		if (pdev == NULL)
+			return -ENODEV;
+		pci_read_config_dword(pdev, 0x58, &r);
+		asr_base = r & 0xFFFE;
+		pci_dev_put(pdev);
+#else
+		/* FIXME: need to use pci_config_lock here,
+		   but it's not exported */
+
+/*		spin_lock_irqsave(&pci_config_lock, flags);*/
+
+		/* Select the SuperIO chip in the PCI I/O port register */
+		outl(0x8000f858, 0xcf8);
+
+		/* BUS 0, Slot 1F, fnc 0, offset 58 */
+
+		/*
+		 * Read the base address for the SuperIO chip.
+		 * Only the lower 16 bits are valid, but the address is word
+		 * aligned so the last bit must be masked off.
+		 */
+		asr_base = inl(0xcfc) & 0xfffe;
+
+/*		spin_unlock_irqrestore(&pci_config_lock, flags);*/
+#endif
+		asr_read_addr = asr_write_addr =
+			asr_base + JASPER_ASR_REG_OFFSET;
+		asr_toggle_mask = JASPER_ASR_TOGGLE_MASK;
+		asr_disable_mask = JASPER_ASR_DISABLE_MASK;
+		asr_length = JASPER_ASR_REG_OFFSET + 1;
+
+		break;
+
+	case ASMTYPE_PEARL:
+		type = "Pearls ";
+		asr_base = PEARL_BASE;
+		asr_read_addr = PEARL_READ;
+		asr_write_addr = PEARL_WRITE;
+		asr_toggle_mask = PEARL_ASR_TOGGLE_MASK;
+		asr_disable_mask = PEARL_ASR_DISABLE_MASK;
+		asr_length = 4;
+		break;
+
+	case ASMTYPE_JUNIPER:
+		type = "Junipers ";
+		asr_base = JUNIPER_BASE_ADDRESS;
+		asr_read_addr = asr_write_addr = asr_base;
+		asr_toggle_mask = JUNIPER_ASR_TOGGLE_MASK;
+		asr_disable_mask = JUNIPER_ASR_DISABLE_MASK;
+		break;
+
+	case ASMTYPE_SPRUCE:
+		type = "Spruce's ";
+		asr_base = SPRUCE_BASE_ADDRESS;
+		asr_read_addr = asr_write_addr = asr_base;
+		asr_toggle_mask = SPRUCE_ASR_TOGGLE_MASK;
+		asr_disable_mask = SPRUCE_ASR_DISABLE_MASK;
+		break;
+	}
+
+	if (!request_region(asr_base, asr_length, "ibmasr")) {
+		pr_err("address %#x already in use\n", asr_base);
+		return -EBUSY;
+	}
+
+	pr_info("found %sASR @ addr %#x\n", type, asr_base);
+
+	return 0;
+}
+
+
+static ssize_t asr_write(struct file *file, const char __user *buf,
+			 size_t count, loff_t *ppos)
+{
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			asr_expect_close = 0;
+
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					asr_expect_close = 42;
+			}
+		}
+		asr_toggle();
+	}
+	return count;
+}
+
+static long asr_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	static const struct watchdog_info ident = {
+		.options =	WDIOF_KEEPALIVEPING |
+				WDIOF_MAGICCLOSE,
+		.identity =	"IBM ASR",
+	};
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int heartbeat;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+	{
+		int new_options, retval = -EINVAL;
+		if (get_user(new_options, p))
+			return -EFAULT;
+		if (new_options & WDIOS_DISABLECARD) {
+			asr_disable();
+			retval = 0;
+		}
+		if (new_options & WDIOS_ENABLECARD) {
+			asr_enable();
+			asr_toggle();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		asr_toggle();
+		return 0;
+	/*
+	 * The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT
+	 * and WDIOC_GETTIMEOUT always returns 256.
+	 */
+	case WDIOC_GETTIMEOUT:
+		heartbeat = 256;
+		return put_user(heartbeat, p);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static int asr_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &asr_is_open))
+		return -EBUSY;
+
+	asr_toggle();
+	asr_enable();
+
+	return nonseekable_open(inode, file);
+}
+
+static int asr_release(struct inode *inode, struct file *file)
+{
+	if (asr_expect_close == 42)
+		asr_disable();
+	else {
+		pr_crit("unexpected close, not stopping watchdog!\n");
+		asr_toggle();
+	}
+	clear_bit(0, &asr_is_open);
+	asr_expect_close = 0;
+	return 0;
+}
+
+static const struct file_operations asr_fops = {
+	.owner =		THIS_MODULE,
+	.llseek =		no_llseek,
+	.write =		asr_write,
+	.unlocked_ioctl =	asr_ioctl,
+	.open =			asr_open,
+	.release =		asr_release,
+};
+
+static struct miscdevice asr_miscdev = {
+	.minor =	WATCHDOG_MINOR,
+	.name =		"watchdog",
+	.fops =		&asr_fops,
+};
+
+
+struct ibmasr_id {
+	const char *desc;
+	int type;
+};
+
+static struct ibmasr_id ibmasr_id_table[] __initdata = {
+	{ "IBM Automatic Server Restart - eserver xSeries 220", ASMTYPE_TOPAZ },
+	{ "IBM Automatic Server Restart - Machine Type 8673", ASMTYPE_PEARL },
+	{ "IBM Automatic Server Restart - Machine Type 8480", ASMTYPE_JASPER },
+	{ "IBM Automatic Server Restart - Machine Type 8482", ASMTYPE_JUNIPER },
+	{ "IBM Automatic Server Restart - Machine Type 8648", ASMTYPE_SPRUCE },
+	{ NULL }
+};
+
+static int __init ibmasr_init(void)
+{
+	struct ibmasr_id *id;
+	int rc;
+
+	for (id = ibmasr_id_table; id->desc; id++) {
+		if (dmi_find_device(DMI_DEV_TYPE_OTHER, id->desc, NULL)) {
+			asr_type = id->type;
+			break;
+		}
+	}
+
+	if (!asr_type)
+		return -ENODEV;
+
+	rc = asr_get_base_address();
+	if (rc)
+		return rc;
+
+	rc = misc_register(&asr_miscdev);
+	if (rc < 0) {
+		release_region(asr_base, asr_length);
+		pr_err("failed to register misc device\n");
+		return rc;
+	}
+
+	return 0;
+}
+
+static void __exit ibmasr_exit(void)
+{
+	if (!nowayout)
+		asr_disable();
+
+	misc_deregister(&asr_miscdev);
+
+	release_region(asr_base, asr_length);
+}
+
+module_init(ibmasr_init);
+module_exit(ibmasr_exit);
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+MODULE_DESCRIPTION("IBM Automatic Server Restart driver");
+MODULE_AUTHOR("Andrey Panin");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/ie6xx_wdt.c b/drivers/watchdog/ie6xx_wdt.c
new file mode 100644
index 000000000..78c2541f5
--- /dev/null
+++ b/drivers/watchdog/ie6xx_wdt.c
@@ -0,0 +1,346 @@
+/*
+ *      Intel Atom E6xx Watchdog driver
+ *
+ *      Copyright (C) 2011 Alexander Stein
+ *                <alexander.stein@systec-electronic.com>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of version 2 of the GNU General
+ *      Public License as published by the Free Software Foundation.
+ *
+ *      This program is distributed in the hope that it will be
+ *      useful, but WITHOUT ANY WARRANTY; without even the implied
+ *      warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ *      PURPOSE.  See the GNU General Public License for more details.
+ *      You should have received a copy of the GNU General Public
+ *      License along with this program; if not, write to the Free
+ *      Software Foundation, Inc., 59 Temple Place - Suite 330,
+ *      Boston, MA  02111-1307, USA.
+ *      The full GNU General Public License is included in this
+ *      distribution in the file called COPYING.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/spinlock.h>
+
+#define DRIVER_NAME "ie6xx_wdt"
+
+#define PV1	0x00
+#define PV2	0x04
+
+#define RR0	0x0c
+#define RR1	0x0d
+#define WDT_RELOAD	0x01
+#define WDT_TOUT	0x02
+
+#define WDTCR	0x10
+#define WDT_PRE_SEL	0x04
+#define WDT_RESET_SEL	0x08
+#define WDT_RESET_EN	0x10
+#define WDT_TOUT_EN	0x20
+
+#define DCR	0x14
+
+#define WDTLR	0x18
+#define WDT_LOCK	0x01
+#define WDT_ENABLE	0x02
+#define WDT_TOUT_CNF	0x03
+
+#define MIN_TIME	1
+#define MAX_TIME	(10 * 60) /* 10 minutes */
+#define DEFAULT_TIME	60
+
+static unsigned int timeout = DEFAULT_TIME;
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout,
+		"Default Watchdog timer setting ("
+		__MODULE_STRING(DEFAULT_TIME) "s)."
+		"The range is from 1 to 600");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static u8 resetmode = 0x10;
+module_param(resetmode, byte, 0);
+MODULE_PARM_DESC(resetmode,
+	"Resetmode bits: 0x08 warm reset (cold reset otherwise), "
+	"0x10 reset enable, 0x20 disable toggle GPIO[4] (default=0x10)");
+
+static struct {
+	unsigned short sch_wdtba;
+	struct spinlock unlock_sequence;
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debugfs;
+#endif
+} ie6xx_wdt_data;
+
+/*
+ * This is needed to write to preload and reload registers
+ * struct ie6xx_wdt_data.unlock_sequence must be used
+ * to prevent sequence interrupts
+ */
+static void ie6xx_wdt_unlock_registers(void)
+{
+	outb(0x80, ie6xx_wdt_data.sch_wdtba + RR0);
+	outb(0x86, ie6xx_wdt_data.sch_wdtba + RR0);
+}
+
+static int ie6xx_wdt_ping(struct watchdog_device *wdd)
+{
+	spin_lock(&ie6xx_wdt_data.unlock_sequence);
+	ie6xx_wdt_unlock_registers();
+	outb(WDT_RELOAD, ie6xx_wdt_data.sch_wdtba + RR1);
+	spin_unlock(&ie6xx_wdt_data.unlock_sequence);
+	return 0;
+}
+
+static int ie6xx_wdt_set_timeout(struct watchdog_device *wdd, unsigned int t)
+{
+	u32 preload;
+	u64 clock;
+	u8 wdtcr;
+
+	/* Watchdog clock is PCI Clock (33MHz) */
+	clock = 33000000;
+	/* and the preload value is loaded into [34:15] of the down counter */
+	preload = (t * clock) >> 15;
+	/*
+	 * Manual states preload must be one less.
+	 * Does not wrap as t is at least 1
+	 */
+	preload -= 1;
+
+	spin_lock(&ie6xx_wdt_data.unlock_sequence);
+
+	/* Set ResetMode & Enable prescaler for range 10ms to 10 min */
+	wdtcr = resetmode & 0x38;
+	outb(wdtcr, ie6xx_wdt_data.sch_wdtba + WDTCR);
+
+	ie6xx_wdt_unlock_registers();
+	outl(0, ie6xx_wdt_data.sch_wdtba + PV1);
+
+	ie6xx_wdt_unlock_registers();
+	outl(preload, ie6xx_wdt_data.sch_wdtba + PV2);
+
+	ie6xx_wdt_unlock_registers();
+	outb(WDT_RELOAD | WDT_TOUT, ie6xx_wdt_data.sch_wdtba + RR1);
+
+	spin_unlock(&ie6xx_wdt_data.unlock_sequence);
+
+	wdd->timeout = t;
+	return 0;
+}
+
+static int ie6xx_wdt_start(struct watchdog_device *wdd)
+{
+	ie6xx_wdt_set_timeout(wdd, wdd->timeout);
+
+	/* Enable the watchdog timer */
+	spin_lock(&ie6xx_wdt_data.unlock_sequence);
+	outb(WDT_ENABLE, ie6xx_wdt_data.sch_wdtba + WDTLR);
+	spin_unlock(&ie6xx_wdt_data.unlock_sequence);
+
+	return 0;
+}
+
+static int ie6xx_wdt_stop(struct watchdog_device *wdd)
+{
+	if (inb(ie6xx_wdt_data.sch_wdtba + WDTLR) & WDT_LOCK)
+		return -1;
+
+	/* Disable the watchdog timer */
+	spin_lock(&ie6xx_wdt_data.unlock_sequence);
+	outb(0, ie6xx_wdt_data.sch_wdtba + WDTLR);
+	spin_unlock(&ie6xx_wdt_data.unlock_sequence);
+
+	return 0;
+}
+
+static const struct watchdog_info ie6xx_wdt_info = {
+	.identity =	"Intel Atom E6xx Watchdog",
+	.options =	WDIOF_SETTIMEOUT |
+			WDIOF_MAGICCLOSE |
+			WDIOF_KEEPALIVEPING,
+};
+
+static const struct watchdog_ops ie6xx_wdt_ops = {
+	.owner =	THIS_MODULE,
+	.start =	ie6xx_wdt_start,
+	.stop =		ie6xx_wdt_stop,
+	.ping =		ie6xx_wdt_ping,
+	.set_timeout =	ie6xx_wdt_set_timeout,
+};
+
+static struct watchdog_device ie6xx_wdt_dev = {
+	.info =		&ie6xx_wdt_info,
+	.ops =		&ie6xx_wdt_ops,
+	.min_timeout =	MIN_TIME,
+	.max_timeout =	MAX_TIME,
+};
+
+#ifdef CONFIG_DEBUG_FS
+
+static int ie6xx_wdt_dbg_show(struct seq_file *s, void *unused)
+{
+	seq_printf(s, "PV1   = 0x%08x\n",
+		inl(ie6xx_wdt_data.sch_wdtba + PV1));
+	seq_printf(s, "PV2   = 0x%08x\n",
+		inl(ie6xx_wdt_data.sch_wdtba + PV2));
+	seq_printf(s, "RR    = 0x%08x\n",
+		inw(ie6xx_wdt_data.sch_wdtba + RR0));
+	seq_printf(s, "WDTCR = 0x%08x\n",
+		inw(ie6xx_wdt_data.sch_wdtba + WDTCR));
+	seq_printf(s, "DCR   = 0x%08x\n",
+		inl(ie6xx_wdt_data.sch_wdtba + DCR));
+	seq_printf(s, "WDTLR = 0x%08x\n",
+		inw(ie6xx_wdt_data.sch_wdtba + WDTLR));
+
+	seq_printf(s, "\n");
+	return 0;
+}
+
+static int ie6xx_wdt_dbg_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ie6xx_wdt_dbg_show, NULL);
+}
+
+static const struct file_operations ie6xx_wdt_dbg_operations = {
+	.open		= ie6xx_wdt_dbg_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void ie6xx_wdt_debugfs_init(void)
+{
+	/* /sys/kernel/debug/ie6xx_wdt */
+	ie6xx_wdt_data.debugfs = debugfs_create_file("ie6xx_wdt",
+		S_IFREG | S_IRUGO, NULL, NULL, &ie6xx_wdt_dbg_operations);
+}
+
+static void ie6xx_wdt_debugfs_exit(void)
+{
+	debugfs_remove(ie6xx_wdt_data.debugfs);
+}
+
+#else
+static void ie6xx_wdt_debugfs_init(void)
+{
+}
+
+static void ie6xx_wdt_debugfs_exit(void)
+{
+}
+#endif
+
+static int ie6xx_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	u8 wdtlr;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!res)
+		return -ENODEV;
+
+	if (!request_region(res->start, resource_size(res), pdev->name)) {
+		dev_err(&pdev->dev, "Watchdog region 0x%llx already in use!\n",
+			(u64)res->start);
+		return -EBUSY;
+	}
+
+	ie6xx_wdt_data.sch_wdtba = res->start;
+	dev_dbg(&pdev->dev, "WDT = 0x%X\n", ie6xx_wdt_data.sch_wdtba);
+
+	ie6xx_wdt_dev.timeout = timeout;
+	watchdog_set_nowayout(&ie6xx_wdt_dev, nowayout);
+	ie6xx_wdt_dev.parent = &pdev->dev;
+
+	spin_lock_init(&ie6xx_wdt_data.unlock_sequence);
+
+	wdtlr = inb(ie6xx_wdt_data.sch_wdtba + WDTLR);
+	if (wdtlr & WDT_LOCK)
+		dev_warn(&pdev->dev,
+			"Watchdog Timer is Locked (Reg=0x%x)\n", wdtlr);
+
+	ie6xx_wdt_debugfs_init();
+
+	ret = watchdog_register_device(&ie6xx_wdt_dev);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Watchdog timer: cannot register device (err =%d)\n",
+									ret);
+		goto misc_register_error;
+	}
+
+	return 0;
+
+misc_register_error:
+	ie6xx_wdt_debugfs_exit();
+	release_region(res->start, resource_size(res));
+	ie6xx_wdt_data.sch_wdtba = 0;
+	return ret;
+}
+
+static int ie6xx_wdt_remove(struct platform_device *pdev)
+{
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	ie6xx_wdt_stop(NULL);
+	watchdog_unregister_device(&ie6xx_wdt_dev);
+	ie6xx_wdt_debugfs_exit();
+	release_region(res->start, resource_size(res));
+	ie6xx_wdt_data.sch_wdtba = 0;
+
+	return 0;
+}
+
+static struct platform_driver ie6xx_wdt_driver = {
+	.probe		= ie6xx_wdt_probe,
+	.remove		= ie6xx_wdt_remove,
+	.driver		= {
+		.name	= DRIVER_NAME,
+	},
+};
+
+static int __init ie6xx_wdt_init(void)
+{
+	/* Check boot parameters to verify that their initial values */
+	/* are in range. */
+	if ((timeout < MIN_TIME) ||
+	    (timeout > MAX_TIME)) {
+		pr_err("Watchdog timer: value of timeout %d (dec) "
+		  "is out of range from %d to %d (dec)\n",
+		  timeout, MIN_TIME, MAX_TIME);
+		return -EINVAL;
+	}
+
+	return platform_driver_register(&ie6xx_wdt_driver);
+}
+
+static void __exit ie6xx_wdt_exit(void)
+{
+	platform_driver_unregister(&ie6xx_wdt_driver);
+}
+
+late_initcall(ie6xx_wdt_init);
+module_exit(ie6xx_wdt_exit);
+
+MODULE_AUTHOR("Alexander Stein <alexander.stein@systec-electronic.com>");
+MODULE_DESCRIPTION("Intel Atom E6xx Watchdog Device Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/watchdog/imgpdc_wdt.c b/drivers/watchdog/imgpdc_wdt.c
new file mode 100644
index 000000000..a3134ffa5
--- /dev/null
+++ b/drivers/watchdog/imgpdc_wdt.c
@@ -0,0 +1,340 @@
+/*
+ * Imagination Technologies PowerDown Controller Watchdog Timer.
+ *
+ * Copyright (c) 2014 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * Based on drivers/watchdog/sunxi_wdt.c Copyright (c) 2013 Carlo Caione
+ *                                                     2012 Henrik Nordstrom
+ *
+ * Notes
+ * -----
+ * The timeout value is rounded to the next power of two clock cycles.
+ * This is configured using the PDC_WDT_CONFIG register, according to this
+ * formula:
+ *
+ *     timeout = 2^(delay + 1) clock cycles
+ *
+ * Where 'delay' is the value written in PDC_WDT_CONFIG register.
+ *
+ * Therefore, the hardware only allows to program watchdog timeouts, expressed
+ * as a power of two number of watchdog clock cycles. The current implementation
+ * guarantees that the actual watchdog timeout will be _at least_ the value
+ * programmed in the imgpdg_wdt driver.
+ *
+ * The following table shows how the user-configured timeout relates
+ * to the actual hardware timeout (watchdog clock @ 40000 Hz):
+ *
+ * input timeout | WD_DELAY | actual timeout
+ * -----------------------------------
+ *      10       |   18     |  13 seconds
+ *      20       |   19     |  26 seconds
+ *      30       |   20     |  52 seconds
+ *      60       |   21     |  104 seconds
+ *
+ * Albeit coarse, this granularity would suffice most watchdog uses.
+ * If the platform allows it, the user should be able to change the watchdog
+ * clock rate and achieve a finer timeout granularity.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/watchdog.h>
+
+/* registers */
+#define PDC_WDT_SOFT_RESET		0x00
+#define PDC_WDT_CONFIG			0x04
+  #define PDC_WDT_CONFIG_ENABLE		BIT(31)
+  #define PDC_WDT_CONFIG_DELAY_MASK	0x1f
+
+#define PDC_WDT_TICKLE1			0x08
+#define PDC_WDT_TICKLE1_MAGIC		0xabcd1234
+#define PDC_WDT_TICKLE2			0x0c
+#define PDC_WDT_TICKLE2_MAGIC		0x4321dcba
+
+#define PDC_WDT_TICKLE_STATUS_MASK	0x7
+#define PDC_WDT_TICKLE_STATUS_SHIFT	0
+#define PDC_WDT_TICKLE_STATUS_HRESET	0x0  /* Hard reset */
+#define PDC_WDT_TICKLE_STATUS_TIMEOUT	0x1  /* Timeout */
+#define PDC_WDT_TICKLE_STATUS_TICKLE	0x2  /* Tickled incorrectly */
+#define PDC_WDT_TICKLE_STATUS_SRESET	0x3  /* Soft reset */
+#define PDC_WDT_TICKLE_STATUS_USER	0x4  /* User reset */
+
+/* Timeout values are in seconds */
+#define PDC_WDT_MIN_TIMEOUT		1
+#define PDC_WDT_DEF_TIMEOUT		64
+
+static int heartbeat;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds "
+	"(default=" __MODULE_STRING(PDC_WDT_DEF_TIMEOUT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+	"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct pdc_wdt_dev {
+	struct watchdog_device wdt_dev;
+	struct clk *wdt_clk;
+	struct clk *sys_clk;
+	void __iomem *base;
+};
+
+static int pdc_wdt_keepalive(struct watchdog_device *wdt_dev)
+{
+	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
+
+	writel(PDC_WDT_TICKLE1_MAGIC, wdt->base + PDC_WDT_TICKLE1);
+	writel(PDC_WDT_TICKLE2_MAGIC, wdt->base + PDC_WDT_TICKLE2);
+
+	return 0;
+}
+
+static int pdc_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	unsigned int val;
+	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
+
+	val = readl(wdt->base + PDC_WDT_CONFIG);
+	val &= ~PDC_WDT_CONFIG_ENABLE;
+	writel(val, wdt->base + PDC_WDT_CONFIG);
+
+	/* Must tickle to finish the stop */
+	pdc_wdt_keepalive(wdt_dev);
+
+	return 0;
+}
+
+static void __pdc_wdt_set_timeout(struct pdc_wdt_dev *wdt)
+{
+	unsigned long clk_rate = clk_get_rate(wdt->wdt_clk);
+	unsigned int val;
+
+	val = readl(wdt->base + PDC_WDT_CONFIG) & ~PDC_WDT_CONFIG_DELAY_MASK;
+	val |= order_base_2(wdt->wdt_dev.timeout * clk_rate) - 1;
+	writel(val, wdt->base + PDC_WDT_CONFIG);
+}
+
+static int pdc_wdt_set_timeout(struct watchdog_device *wdt_dev,
+			       unsigned int new_timeout)
+{
+	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
+
+	wdt->wdt_dev.timeout = new_timeout;
+
+	__pdc_wdt_set_timeout(wdt);
+
+	return 0;
+}
+
+/* Start the watchdog timer (delay should already be set) */
+static int pdc_wdt_start(struct watchdog_device *wdt_dev)
+{
+	unsigned int val;
+	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
+
+	__pdc_wdt_set_timeout(wdt);
+
+	val = readl(wdt->base + PDC_WDT_CONFIG);
+	val |= PDC_WDT_CONFIG_ENABLE;
+	writel(val, wdt->base + PDC_WDT_CONFIG);
+
+	return 0;
+}
+
+static int pdc_wdt_restart(struct watchdog_device *wdt_dev,
+			   unsigned long action, void *data)
+{
+	struct pdc_wdt_dev *wdt = watchdog_get_drvdata(wdt_dev);
+
+	/* Assert SOFT_RESET */
+	writel(0x1, wdt->base + PDC_WDT_SOFT_RESET);
+
+	return 0;
+}
+
+static const struct watchdog_info pdc_wdt_info = {
+	.identity	= "IMG PDC Watchdog",
+	.options	= WDIOF_SETTIMEOUT |
+			  WDIOF_KEEPALIVEPING |
+			  WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops pdc_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= pdc_wdt_start,
+	.stop		= pdc_wdt_stop,
+	.ping		= pdc_wdt_keepalive,
+	.set_timeout	= pdc_wdt_set_timeout,
+	.restart        = pdc_wdt_restart,
+};
+
+static int pdc_wdt_probe(struct platform_device *pdev)
+{
+	u64 div;
+	int ret, val;
+	unsigned long clk_rate;
+	struct resource *res;
+	struct pdc_wdt_dev *pdc_wdt;
+
+	pdc_wdt = devm_kzalloc(&pdev->dev, sizeof(*pdc_wdt), GFP_KERNEL);
+	if (!pdc_wdt)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pdc_wdt->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pdc_wdt->base))
+		return PTR_ERR(pdc_wdt->base);
+
+	pdc_wdt->sys_clk = devm_clk_get(&pdev->dev, "sys");
+	if (IS_ERR(pdc_wdt->sys_clk)) {
+		dev_err(&pdev->dev, "failed to get the sys clock\n");
+		return PTR_ERR(pdc_wdt->sys_clk);
+	}
+
+	pdc_wdt->wdt_clk = devm_clk_get(&pdev->dev, "wdt");
+	if (IS_ERR(pdc_wdt->wdt_clk)) {
+		dev_err(&pdev->dev, "failed to get the wdt clock\n");
+		return PTR_ERR(pdc_wdt->wdt_clk);
+	}
+
+	ret = clk_prepare_enable(pdc_wdt->sys_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "could not prepare or enable sys clock\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(pdc_wdt->wdt_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "could not prepare or enable wdt clock\n");
+		goto disable_sys_clk;
+	}
+
+	/* We use the clock rate to calculate the max timeout */
+	clk_rate = clk_get_rate(pdc_wdt->wdt_clk);
+	if (clk_rate == 0) {
+		dev_err(&pdev->dev, "failed to get clock rate\n");
+		ret = -EINVAL;
+		goto disable_wdt_clk;
+	}
+
+	if (order_base_2(clk_rate) > PDC_WDT_CONFIG_DELAY_MASK + 1) {
+		dev_err(&pdev->dev, "invalid clock rate\n");
+		ret = -EINVAL;
+		goto disable_wdt_clk;
+	}
+
+	if (order_base_2(clk_rate) == 0)
+		pdc_wdt->wdt_dev.min_timeout = PDC_WDT_MIN_TIMEOUT + 1;
+	else
+		pdc_wdt->wdt_dev.min_timeout = PDC_WDT_MIN_TIMEOUT;
+
+	pdc_wdt->wdt_dev.info = &pdc_wdt_info;
+	pdc_wdt->wdt_dev.ops = &pdc_wdt_ops;
+
+	div = 1ULL << (PDC_WDT_CONFIG_DELAY_MASK + 1);
+	do_div(div, clk_rate);
+	pdc_wdt->wdt_dev.max_timeout = div;
+	pdc_wdt->wdt_dev.timeout = PDC_WDT_DEF_TIMEOUT;
+	pdc_wdt->wdt_dev.parent = &pdev->dev;
+	watchdog_set_drvdata(&pdc_wdt->wdt_dev, pdc_wdt);
+
+	watchdog_init_timeout(&pdc_wdt->wdt_dev, heartbeat, &pdev->dev);
+
+	pdc_wdt_stop(&pdc_wdt->wdt_dev);
+
+	/* Find what caused the last reset */
+	val = readl(pdc_wdt->base + PDC_WDT_TICKLE1);
+	val = (val & PDC_WDT_TICKLE_STATUS_MASK) >> PDC_WDT_TICKLE_STATUS_SHIFT;
+	switch (val) {
+	case PDC_WDT_TICKLE_STATUS_TICKLE:
+	case PDC_WDT_TICKLE_STATUS_TIMEOUT:
+		pdc_wdt->wdt_dev.bootstatus |= WDIOF_CARDRESET;
+		dev_info(&pdev->dev,
+			 "watchdog module last reset due to timeout\n");
+		break;
+	case PDC_WDT_TICKLE_STATUS_HRESET:
+		dev_info(&pdev->dev,
+			 "watchdog module last reset due to hard reset\n");
+		break;
+	case PDC_WDT_TICKLE_STATUS_SRESET:
+		dev_info(&pdev->dev,
+			 "watchdog module last reset due to soft reset\n");
+		break;
+	case PDC_WDT_TICKLE_STATUS_USER:
+		dev_info(&pdev->dev,
+			 "watchdog module last reset due to user reset\n");
+		break;
+	default:
+		dev_info(&pdev->dev,
+			 "contains an illegal status code (%08x)\n", val);
+		break;
+	}
+
+	watchdog_set_nowayout(&pdc_wdt->wdt_dev, nowayout);
+	watchdog_set_restart_priority(&pdc_wdt->wdt_dev, 128);
+
+	platform_set_drvdata(pdev, pdc_wdt);
+
+	ret = watchdog_register_device(&pdc_wdt->wdt_dev);
+	if (ret)
+		goto disable_wdt_clk;
+
+	return 0;
+
+disable_wdt_clk:
+	clk_disable_unprepare(pdc_wdt->wdt_clk);
+disable_sys_clk:
+	clk_disable_unprepare(pdc_wdt->sys_clk);
+	return ret;
+}
+
+static void pdc_wdt_shutdown(struct platform_device *pdev)
+{
+	struct pdc_wdt_dev *pdc_wdt = platform_get_drvdata(pdev);
+
+	pdc_wdt_stop(&pdc_wdt->wdt_dev);
+}
+
+static int pdc_wdt_remove(struct platform_device *pdev)
+{
+	struct pdc_wdt_dev *pdc_wdt = platform_get_drvdata(pdev);
+
+	pdc_wdt_stop(&pdc_wdt->wdt_dev);
+	watchdog_unregister_device(&pdc_wdt->wdt_dev);
+	clk_disable_unprepare(pdc_wdt->wdt_clk);
+	clk_disable_unprepare(pdc_wdt->sys_clk);
+
+	return 0;
+}
+
+static const struct of_device_id pdc_wdt_match[] = {
+	{ .compatible = "img,pdc-wdt" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, pdc_wdt_match);
+
+static struct platform_driver pdc_wdt_driver = {
+	.driver = {
+		.name = "imgpdc-wdt",
+		.of_match_table	= pdc_wdt_match,
+	},
+	.probe = pdc_wdt_probe,
+	.remove = pdc_wdt_remove,
+	.shutdown = pdc_wdt_shutdown,
+};
+module_platform_driver(pdc_wdt_driver);
+
+MODULE_AUTHOR("Jude Abraham <Jude.Abraham@imgtec.com>");
+MODULE_AUTHOR("Naidu Tellapati <Naidu.Tellapati@imgtec.com>");
+MODULE_DESCRIPTION("Imagination Technologies PDC Watchdog Timer Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
new file mode 100644
index 000000000..9f3123b04
--- /dev/null
+++ b/drivers/watchdog/imx2_wdt.c
@@ -0,0 +1,440 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Watchdog driver for IMX2 and later processors
+ *
+ *  Copyright (C) 2010 Wolfram Sang, Pengutronix e.K. <w.sang@pengutronix.de>
+ *  Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * some parts adapted by similar drivers from Darius Augulis and Vladimir
+ * Zapolskiy, additional improvements by Wim Van Sebroeck.
+ *
+ * NOTE: MX1 has a slightly different Watchdog than MX2 and later:
+ *
+ *			MX1:		MX2+:
+ *			----		-----
+ * Registers:		32-bit		16-bit
+ * Stopable timer:	Yes		No
+ * Need to enable clk:	No		Yes
+ * Halt on suspend:	Manual		Can be automatic
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/watchdog.h>
+
+#define DRIVER_NAME "imx2-wdt"
+
+#define IMX2_WDT_WCR		0x00		/* Control Register */
+#define IMX2_WDT_WCR_WT		(0xFF << 8)	/* -> Watchdog Timeout Field */
+#define IMX2_WDT_WCR_WDA	BIT(5)		/* -> External Reset WDOG_B */
+#define IMX2_WDT_WCR_SRS	BIT(4)		/* -> Software Reset Signal */
+#define IMX2_WDT_WCR_WRE	BIT(3)		/* -> WDOG Reset Enable */
+#define IMX2_WDT_WCR_WDE	BIT(2)		/* -> Watchdog Enable */
+#define IMX2_WDT_WCR_WDZST	BIT(0)		/* -> Watchdog timer Suspend */
+
+#define IMX2_WDT_WSR		0x02		/* Service Register */
+#define IMX2_WDT_SEQ1		0x5555		/* -> service sequence 1 */
+#define IMX2_WDT_SEQ2		0xAAAA		/* -> service sequence 2 */
+
+#define IMX2_WDT_WRSR		0x04		/* Reset Status Register */
+#define IMX2_WDT_WRSR_TOUT	BIT(1)		/* -> Reset due to Timeout */
+
+#define IMX2_WDT_WICR		0x06		/* Interrupt Control Register */
+#define IMX2_WDT_WICR_WIE	BIT(15)		/* -> Interrupt Enable */
+#define IMX2_WDT_WICR_WTIS	BIT(14)		/* -> Interrupt Status */
+#define IMX2_WDT_WICR_WICT	0xFF		/* -> Interrupt Count Timeout */
+
+#define IMX2_WDT_WMCR		0x08		/* Misc Register */
+
+#define IMX2_WDT_MAX_TIME	128U
+#define IMX2_WDT_DEFAULT_TIME	60		/* in seconds */
+
+#define WDOG_SEC_TO_COUNT(s)	((s * 2 - 1) << 8)
+
+struct imx2_wdt_device {
+	struct clk *clk;
+	struct regmap *regmap;
+	struct watchdog_device wdog;
+	bool ext_reset;
+};
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+
+static unsigned timeout;
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default="
+				__MODULE_STRING(IMX2_WDT_DEFAULT_TIME) ")");
+
+static const struct watchdog_info imx2_wdt_info = {
+	.identity = "imx2+ watchdog",
+	.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_info imx2_wdt_pretimeout_info = {
+	.identity = "imx2+ watchdog",
+	.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
+		   WDIOF_PRETIMEOUT,
+};
+
+static int imx2_wdt_restart(struct watchdog_device *wdog, unsigned long action,
+			    void *data)
+{
+	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
+	unsigned int wcr_enable = IMX2_WDT_WCR_WDE;
+
+	/* Use internal reset or external - not both */
+	if (wdev->ext_reset)
+		wcr_enable |= IMX2_WDT_WCR_SRS; /* do not assert int reset */
+	else
+		wcr_enable |= IMX2_WDT_WCR_WDA; /* do not assert ext-reset */
+
+	/* Assert SRS signal */
+	regmap_write(wdev->regmap, IMX2_WDT_WCR, wcr_enable);
+	/*
+	 * Due to imx6q errata ERR004346 (WDOG: WDOG SRS bit requires to be
+	 * written twice), we add another two writes to ensure there must be at
+	 * least two writes happen in the same one 32kHz clock period.  We save
+	 * the target check here, since the writes shouldn't be a huge burden
+	 * for other platforms.
+	 */
+	regmap_write(wdev->regmap, IMX2_WDT_WCR, wcr_enable);
+	regmap_write(wdev->regmap, IMX2_WDT_WCR, wcr_enable);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	return 0;
+}
+
+static inline void imx2_wdt_setup(struct watchdog_device *wdog)
+{
+	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
+	u32 val;
+
+	regmap_read(wdev->regmap, IMX2_WDT_WCR, &val);
+
+	/* Suspend timer in low power mode, write once-only */
+	val |= IMX2_WDT_WCR_WDZST;
+	/* Strip the old watchdog Time-Out value */
+	val &= ~IMX2_WDT_WCR_WT;
+	/* Generate internal chip-level reset if WDOG times out */
+	if (!wdev->ext_reset)
+		val &= ~IMX2_WDT_WCR_WRE;
+	/* Or if external-reset assert WDOG_B reset only on time-out */
+	else
+		val |= IMX2_WDT_WCR_WRE;
+	/* Keep Watchdog Disabled */
+	val &= ~IMX2_WDT_WCR_WDE;
+	/* Set the watchdog's Time-Out value */
+	val |= WDOG_SEC_TO_COUNT(wdog->timeout);
+
+	regmap_write(wdev->regmap, IMX2_WDT_WCR, val);
+
+	/* enable the watchdog */
+	val |= IMX2_WDT_WCR_WDE;
+	regmap_write(wdev->regmap, IMX2_WDT_WCR, val);
+}
+
+static inline bool imx2_wdt_is_running(struct imx2_wdt_device *wdev)
+{
+	u32 val;
+
+	regmap_read(wdev->regmap, IMX2_WDT_WCR, &val);
+
+	return val & IMX2_WDT_WCR_WDE;
+}
+
+static int imx2_wdt_ping(struct watchdog_device *wdog)
+{
+	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
+
+	regmap_write(wdev->regmap, IMX2_WDT_WSR, IMX2_WDT_SEQ1);
+	regmap_write(wdev->regmap, IMX2_WDT_WSR, IMX2_WDT_SEQ2);
+	return 0;
+}
+
+static void __imx2_wdt_set_timeout(struct watchdog_device *wdog,
+				   unsigned int new_timeout)
+{
+	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
+
+	regmap_update_bits(wdev->regmap, IMX2_WDT_WCR, IMX2_WDT_WCR_WT,
+			   WDOG_SEC_TO_COUNT(new_timeout));
+}
+
+static int imx2_wdt_set_timeout(struct watchdog_device *wdog,
+				unsigned int new_timeout)
+{
+	unsigned int actual;
+
+	actual = min(new_timeout, IMX2_WDT_MAX_TIME);
+	__imx2_wdt_set_timeout(wdog, actual);
+	wdog->timeout = new_timeout;
+	return 0;
+}
+
+static int imx2_wdt_set_pretimeout(struct watchdog_device *wdog,
+				   unsigned int new_pretimeout)
+{
+	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
+
+	if (new_pretimeout >= IMX2_WDT_MAX_TIME)
+		return -EINVAL;
+
+	wdog->pretimeout = new_pretimeout;
+
+	regmap_update_bits(wdev->regmap, IMX2_WDT_WICR,
+			   IMX2_WDT_WICR_WIE | IMX2_WDT_WICR_WICT,
+			   IMX2_WDT_WICR_WIE | (new_pretimeout << 1));
+	return 0;
+}
+
+static irqreturn_t imx2_wdt_isr(int irq, void *wdog_arg)
+{
+	struct watchdog_device *wdog = wdog_arg;
+	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
+
+	regmap_write_bits(wdev->regmap, IMX2_WDT_WICR,
+			  IMX2_WDT_WICR_WTIS, IMX2_WDT_WICR_WTIS);
+
+	watchdog_notify_pretimeout(wdog);
+
+	return IRQ_HANDLED;
+}
+
+static int imx2_wdt_start(struct watchdog_device *wdog)
+{
+	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
+
+	if (imx2_wdt_is_running(wdev))
+		imx2_wdt_set_timeout(wdog, wdog->timeout);
+	else
+		imx2_wdt_setup(wdog);
+
+	set_bit(WDOG_HW_RUNNING, &wdog->status);
+
+	return imx2_wdt_ping(wdog);
+}
+
+static const struct watchdog_ops imx2_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = imx2_wdt_start,
+	.ping = imx2_wdt_ping,
+	.set_timeout = imx2_wdt_set_timeout,
+	.set_pretimeout = imx2_wdt_set_pretimeout,
+	.restart = imx2_wdt_restart,
+};
+
+static const struct regmap_config imx2_wdt_regmap_config = {
+	.reg_bits = 16,
+	.reg_stride = 2,
+	.val_bits = 16,
+	.max_register = 0x8,
+};
+
+static int __init imx2_wdt_probe(struct platform_device *pdev)
+{
+	struct imx2_wdt_device *wdev;
+	struct watchdog_device *wdog;
+	struct resource *res;
+	void __iomem *base;
+	int ret;
+	u32 val;
+
+	wdev = devm_kzalloc(&pdev->dev, sizeof(*wdev), GFP_KERNEL);
+	if (!wdev)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	wdev->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
+						 &imx2_wdt_regmap_config);
+	if (IS_ERR(wdev->regmap)) {
+		dev_err(&pdev->dev, "regmap init failed\n");
+		return PTR_ERR(wdev->regmap);
+	}
+
+	wdev->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(wdev->clk)) {
+		dev_err(&pdev->dev, "can't get Watchdog clock\n");
+		return PTR_ERR(wdev->clk);
+	}
+
+	wdog			= &wdev->wdog;
+	wdog->info		= &imx2_wdt_info;
+	wdog->ops		= &imx2_wdt_ops;
+	wdog->min_timeout	= 1;
+	wdog->timeout		= IMX2_WDT_DEFAULT_TIME;
+	wdog->max_hw_heartbeat_ms = IMX2_WDT_MAX_TIME * 1000;
+	wdog->parent		= &pdev->dev;
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret > 0)
+		if (!devm_request_irq(&pdev->dev, ret, imx2_wdt_isr, 0,
+				      dev_name(&pdev->dev), wdog))
+			wdog->info = &imx2_wdt_pretimeout_info;
+
+	ret = clk_prepare_enable(wdev->clk);
+	if (ret)
+		return ret;
+
+	regmap_read(wdev->regmap, IMX2_WDT_WRSR, &val);
+	wdog->bootstatus = val & IMX2_WDT_WRSR_TOUT ? WDIOF_CARDRESET : 0;
+
+	wdev->ext_reset = of_property_read_bool(pdev->dev.of_node,
+						"fsl,ext-reset-output");
+	platform_set_drvdata(pdev, wdog);
+	watchdog_set_drvdata(wdog, wdev);
+	watchdog_set_nowayout(wdog, nowayout);
+	watchdog_set_restart_priority(wdog, 128);
+	watchdog_init_timeout(wdog, timeout, &pdev->dev);
+
+	if (imx2_wdt_is_running(wdev)) {
+		imx2_wdt_set_timeout(wdog, wdog->timeout);
+		set_bit(WDOG_HW_RUNNING, &wdog->status);
+	}
+
+	/*
+	 * Disable the watchdog power down counter at boot. Otherwise the power
+	 * down counter will pull down the #WDOG interrupt line for one clock
+	 * cycle.
+	 */
+	regmap_write(wdev->regmap, IMX2_WDT_WMCR, 0);
+
+	ret = watchdog_register_device(wdog);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot register watchdog device\n");
+		goto disable_clk;
+	}
+
+	dev_info(&pdev->dev, "timeout %d sec (nowayout=%d)\n",
+		 wdog->timeout, nowayout);
+
+	return 0;
+
+disable_clk:
+	clk_disable_unprepare(wdev->clk);
+	return ret;
+}
+
+static int __exit imx2_wdt_remove(struct platform_device *pdev)
+{
+	struct watchdog_device *wdog = platform_get_drvdata(pdev);
+	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
+
+	watchdog_unregister_device(wdog);
+
+	if (imx2_wdt_is_running(wdev)) {
+		imx2_wdt_ping(wdog);
+		dev_crit(&pdev->dev, "Device removed: Expect reboot!\n");
+	}
+	return 0;
+}
+
+static void imx2_wdt_shutdown(struct platform_device *pdev)
+{
+	struct watchdog_device *wdog = platform_get_drvdata(pdev);
+	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
+
+	if (imx2_wdt_is_running(wdev)) {
+		/*
+		 * We are running, configure max timeout before reboot
+		 * will take place.
+		 */
+		imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME);
+		imx2_wdt_ping(wdog);
+		dev_crit(&pdev->dev, "Device shutdown: Expect reboot!\n");
+	}
+}
+
+#ifdef CONFIG_PM_SLEEP
+/* Disable watchdog if it is active or non-active but still running */
+static int imx2_wdt_suspend(struct device *dev)
+{
+	struct watchdog_device *wdog = dev_get_drvdata(dev);
+	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
+
+	/* The watchdog IP block is running */
+	if (imx2_wdt_is_running(wdev)) {
+		/*
+		 * Don't update wdog->timeout, we'll restore the current value
+		 * during resume.
+		 */
+		__imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME);
+		imx2_wdt_ping(wdog);
+	}
+
+	clk_disable_unprepare(wdev->clk);
+
+	return 0;
+}
+
+/* Enable watchdog and configure it if necessary */
+static int imx2_wdt_resume(struct device *dev)
+{
+	struct watchdog_device *wdog = dev_get_drvdata(dev);
+	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
+	int ret;
+
+	ret = clk_prepare_enable(wdev->clk);
+	if (ret)
+		return ret;
+
+	if (watchdog_active(wdog) && !imx2_wdt_is_running(wdev)) {
+		/*
+		 * If the watchdog is still active and resumes
+		 * from deep sleep state, need to restart the
+		 * watchdog again.
+		 */
+		imx2_wdt_setup(wdog);
+	}
+	if (imx2_wdt_is_running(wdev)) {
+		imx2_wdt_set_timeout(wdog, wdog->timeout);
+		imx2_wdt_ping(wdog);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(imx2_wdt_pm_ops, imx2_wdt_suspend,
+			 imx2_wdt_resume);
+
+static const struct of_device_id imx2_wdt_dt_ids[] = {
+	{ .compatible = "fsl,imx21-wdt", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx2_wdt_dt_ids);
+
+static struct platform_driver imx2_wdt_driver = {
+	.remove		= __exit_p(imx2_wdt_remove),
+	.shutdown	= imx2_wdt_shutdown,
+	.driver		= {
+		.name	= DRIVER_NAME,
+		.pm     = &imx2_wdt_pm_ops,
+		.of_match_table = imx2_wdt_dt_ids,
+	},
+};
+
+module_platform_driver_probe(imx2_wdt_driver, imx2_wdt_probe);
+
+MODULE_AUTHOR("Wolfram Sang");
+MODULE_DESCRIPTION("Watchdog driver for IMX2 and later");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/watchdog/indydog.c b/drivers/watchdog/indydog.c
new file mode 100644
index 000000000..5d20cdd30
--- /dev/null
+++ b/drivers/watchdog/indydog.c
@@ -0,0 +1,207 @@
+/*
+ *	IndyDog	0.3	A Hardware Watchdog Device for SGI IP22
+ *
+ *	(c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>,
+ *						All Rights Reserved.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	based on softdog.c by Alan Cox <alan@lxorguk.ukuu.org.uk>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/uaccess.h>
+#include <asm/sgi/mc.h>
+
+static unsigned long indydog_alive;
+static DEFINE_SPINLOCK(indydog_lock);
+
+#define WATCHDOG_TIMEOUT 30		/* 30 sec default timeout */
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static void indydog_start(void)
+{
+	spin_lock(&indydog_lock);
+	sgimc->cpuctrl0 |= SGIMC_CCTRL0_WDOG;
+	spin_unlock(&indydog_lock);
+}
+
+static void indydog_stop(void)
+{
+	spin_lock(&indydog_lock);
+	sgimc->cpuctrl0 &= ~SGIMC_CCTRL0_WDOG;
+	spin_unlock(&indydog_lock);
+
+	pr_info("Stopped watchdog timer\n");
+}
+
+static void indydog_ping(void)
+{
+	sgimc->watchdogt = 0;
+}
+
+/*
+ *	Allow only one person to hold it open
+ */
+static int indydog_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &indydog_alive))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	/* Activate timer */
+	indydog_start();
+	indydog_ping();
+
+	pr_info("Started watchdog timer\n");
+
+	return nonseekable_open(inode, file);
+}
+
+static int indydog_release(struct inode *inode, struct file *file)
+{
+	/* Shut off the timer.
+	 * Lock it in if it's a module and we defined ...NOWAYOUT */
+	if (!nowayout)
+		indydog_stop();		/* Turn the WDT off */
+	clear_bit(0, &indydog_alive);
+	return 0;
+}
+
+static ssize_t indydog_write(struct file *file, const char *data,
+						size_t len, loff_t *ppos)
+{
+	/* Refresh the timer. */
+	if (len)
+		indydog_ping();
+	return len;
+}
+
+static long indydog_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	int options, retval = -EINVAL;
+	static const struct watchdog_info ident = {
+		.options		= WDIOF_KEEPALIVEPING,
+		.firmware_version	= 0,
+		.identity		= "Hardware Watchdog for SGI IP22",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user((struct watchdog_info *)arg,
+				 &ident, sizeof(ident)))
+			return -EFAULT;
+		return 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, (int *)arg);
+	case WDIOC_SETOPTIONS:
+	{
+		if (get_user(options, (int *)arg))
+			return -EFAULT;
+		if (options & WDIOS_DISABLECARD) {
+			indydog_stop();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			indydog_start();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		indydog_ping();
+		return 0;
+	case WDIOC_GETTIMEOUT:
+		return put_user(WATCHDOG_TIMEOUT, (int *)arg);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static int indydog_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		indydog_stop();		/* Turn the WDT off */
+
+	return NOTIFY_DONE;
+}
+
+static const struct file_operations indydog_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= indydog_write,
+	.unlocked_ioctl	= indydog_ioctl,
+	.open		= indydog_open,
+	.release	= indydog_release,
+};
+
+static struct miscdevice indydog_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &indydog_fops,
+};
+
+static struct notifier_block indydog_notifier = {
+	.notifier_call = indydog_notify_sys,
+};
+
+static int __init watchdog_init(void)
+{
+	int ret;
+
+	ret = register_reboot_notifier(&indydog_notifier);
+	if (ret) {
+		pr_err("cannot register reboot notifier (err=%d)\n", ret);
+		return ret;
+	}
+
+	ret = misc_register(&indydog_miscdev);
+	if (ret) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, ret);
+		unregister_reboot_notifier(&indydog_notifier);
+		return ret;
+	}
+
+	pr_info("Hardware Watchdog Timer for SGI IP22: 0.3\n");
+
+	return 0;
+}
+
+static void __exit watchdog_exit(void)
+{
+	misc_deregister(&indydog_miscdev);
+	unregister_reboot_notifier(&indydog_notifier);
+}
+
+module_init(watchdog_init);
+module_exit(watchdog_exit);
+
+MODULE_AUTHOR("Guido Guenther <agx@sigxcpu.org>");
+MODULE_DESCRIPTION("Hardware Watchdog Device for SGI IP22");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/intel-mid_wdt.c b/drivers/watchdog/intel-mid_wdt.c
new file mode 100644
index 000000000..72c108a12
--- /dev/null
+++ b/drivers/watchdog/intel-mid_wdt.c
@@ -0,0 +1,188 @@
+/*
+ *      intel-mid_wdt: generic Intel MID SCU watchdog driver
+ *
+ *      Platforms supported so far:
+ *      - Merrifield only
+ *
+ *      Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *      Contact: David Cohen <david.a.cohen@linux.intel.com>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of version 2 of the GNU General
+ *      Public License as published by the Free Software Foundation.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/nmi.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/platform_data/intel-mid_wdt.h>
+
+#include <asm/intel_scu_ipc.h>
+#include <asm/intel-mid.h>
+
+#define IPC_WATCHDOG 0xf8
+
+#define MID_WDT_PRETIMEOUT		15
+#define MID_WDT_TIMEOUT_MIN		(1 + MID_WDT_PRETIMEOUT)
+#define MID_WDT_TIMEOUT_MAX		170
+#define MID_WDT_DEFAULT_TIMEOUT		90
+
+/* SCU watchdog messages */
+enum {
+	SCU_WATCHDOG_START = 0,
+	SCU_WATCHDOG_STOP,
+	SCU_WATCHDOG_KEEPALIVE,
+};
+
+static inline int wdt_command(int sub, u32 *in, int inlen)
+{
+	return intel_scu_ipc_command(IPC_WATCHDOG, sub, in, inlen, NULL, 0);
+}
+
+static int wdt_start(struct watchdog_device *wd)
+{
+	struct device *dev = watchdog_get_drvdata(wd);
+	int ret, in_size;
+	int timeout = wd->timeout;
+	struct ipc_wd_start {
+		u32 pretimeout;
+		u32 timeout;
+	} ipc_wd_start = { timeout - MID_WDT_PRETIMEOUT, timeout };
+
+	/*
+	 * SCU expects the input size for watchdog IPC to
+	 * be based on 4 bytes
+	 */
+	in_size = DIV_ROUND_UP(sizeof(ipc_wd_start), 4);
+
+	ret = wdt_command(SCU_WATCHDOG_START, (u32 *)&ipc_wd_start, in_size);
+	if (ret)
+		dev_crit(dev, "error starting watchdog: %d\n", ret);
+
+	return ret;
+}
+
+static int wdt_ping(struct watchdog_device *wd)
+{
+	struct device *dev = watchdog_get_drvdata(wd);
+	int ret;
+
+	ret = wdt_command(SCU_WATCHDOG_KEEPALIVE, NULL, 0);
+	if (ret)
+		dev_crit(dev, "Error executing keepalive: %d\n", ret);
+
+	return ret;
+}
+
+static int wdt_stop(struct watchdog_device *wd)
+{
+	struct device *dev = watchdog_get_drvdata(wd);
+	int ret;
+
+	ret = wdt_command(SCU_WATCHDOG_STOP, NULL, 0);
+	if (ret)
+		dev_crit(dev, "Error stopping watchdog: %d\n", ret);
+
+	return ret;
+}
+
+static irqreturn_t mid_wdt_irq(int irq, void *dev_id)
+{
+	panic("Kernel Watchdog");
+
+	/* This code should not be reached */
+	return IRQ_HANDLED;
+}
+
+static const struct watchdog_info mid_wdt_info = {
+	.identity = "Intel MID SCU watchdog",
+	.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops mid_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = wdt_start,
+	.stop = wdt_stop,
+	.ping = wdt_ping,
+};
+
+static int mid_wdt_probe(struct platform_device *pdev)
+{
+	struct watchdog_device *wdt_dev;
+	struct intel_mid_wdt_pdata *pdata = pdev->dev.platform_data;
+	int ret;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		return -EINVAL;
+	}
+
+	if (pdata->probe) {
+		ret = pdata->probe(pdev);
+		if (ret)
+			return ret;
+	}
+
+	wdt_dev = devm_kzalloc(&pdev->dev, sizeof(*wdt_dev), GFP_KERNEL);
+	if (!wdt_dev)
+		return -ENOMEM;
+
+	wdt_dev->info = &mid_wdt_info;
+	wdt_dev->ops = &mid_wdt_ops;
+	wdt_dev->min_timeout = MID_WDT_TIMEOUT_MIN;
+	wdt_dev->max_timeout = MID_WDT_TIMEOUT_MAX;
+	wdt_dev->timeout = MID_WDT_DEFAULT_TIMEOUT;
+	wdt_dev->parent = &pdev->dev;
+
+	watchdog_set_drvdata(wdt_dev, &pdev->dev);
+
+	ret = devm_request_irq(&pdev->dev, pdata->irq, mid_wdt_irq,
+			       IRQF_SHARED | IRQF_NO_SUSPEND, "watchdog",
+			       wdt_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "error requesting warning irq %d\n",
+			pdata->irq);
+		return ret;
+	}
+
+	/*
+	 * The firmware followed by U-Boot leaves the watchdog running
+	 * with the default threshold which may vary. When we get here
+	 * we should make a decision to prevent any side effects before
+	 * user space daemon will take care of it. The best option,
+	 * taking into consideration that there is no way to read values
+	 * back from hardware, is to enforce watchdog being run with
+	 * deterministic values.
+	 */
+	ret = wdt_start(wdt_dev);
+	if (ret)
+		return ret;
+
+	/* Make sure the watchdog is serviced */
+	set_bit(WDOG_HW_RUNNING, &wdt_dev->status);
+
+	ret = devm_watchdog_register_device(&pdev->dev, wdt_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "error registering watchdog device\n");
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "Intel MID watchdog device probed\n");
+
+	return 0;
+}
+
+static struct platform_driver mid_wdt_driver = {
+	.probe		= mid_wdt_probe,
+	.driver		= {
+		.name	= "intel_mid_wdt",
+	},
+};
+
+module_platform_driver(mid_wdt_driver);
+
+MODULE_AUTHOR("David Cohen <david.a.cohen@linux.intel.com>");
+MODULE_DESCRIPTION("Watchdog Driver for Intel MID platform");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/intel_scu_watchdog.c b/drivers/watchdog/intel_scu_watchdog.c
new file mode 100644
index 000000000..0caab6241
--- /dev/null
+++ b/drivers/watchdog/intel_scu_watchdog.c
@@ -0,0 +1,565 @@
+/*
+ *      Intel_SCU 0.2:  An Intel SCU IOH Based Watchdog Device
+ *			for Intel part #(s):
+ *				- AF82MP20 PCH
+ *
+ *      Copyright (C) 2009-2010 Intel Corporation. All rights reserved.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of version 2 of the GNU General
+ *      Public License as published by the Free Software Foundation.
+ *
+ *      This program is distributed in the hope that it will be
+ *      useful, but WITHOUT ANY WARRANTY; without even the implied
+ *      warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ *      PURPOSE.  See the GNU General Public License for more details.
+ *      You should have received a copy of the GNU General Public
+ *      License along with this program; if not, write to the Free
+ *      Software Foundation, Inc., 59 Temple Place - Suite 330,
+ *      Boston, MA  02111-1307, USA.
+ *      The full GNU General Public License is included in this
+ *      distribution in the file called COPYING.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/compiler.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/sfi.h>
+#include <asm/irq.h>
+#include <linux/atomic.h>
+#include <asm/intel_scu_ipc.h>
+#include <asm/apb_timer.h>
+#include <asm/intel-mid.h>
+
+#include "intel_scu_watchdog.h"
+
+/* Bounds number of times we will retry loading time count */
+/* This retry is a work around for a silicon bug.	   */
+#define MAX_RETRY 16
+
+#define IPC_SET_WATCHDOG_TIMER	0xF8
+
+static int timer_margin = DEFAULT_SOFT_TO_HARD_MARGIN;
+module_param(timer_margin, int, 0);
+MODULE_PARM_DESC(timer_margin,
+		"Watchdog timer margin"
+		"Time between interrupt and resetting the system"
+		"The range is from 1 to 160"
+		"This is the time for all keep alives to arrive");
+
+static int timer_set = DEFAULT_TIME;
+module_param(timer_set, int, 0);
+MODULE_PARM_DESC(timer_set,
+		"Default Watchdog timer setting"
+		"Complete cycle time"
+		"The range is from 1 to 170"
+		"This is the time for all keep alives to arrive");
+
+/* After watchdog device is closed, check force_boot. If:
+ * force_boot == 0, then force boot on next watchdog interrupt after close,
+ * force_boot == 1, then force boot immediately when device is closed.
+ */
+static int force_boot;
+module_param(force_boot, int, 0);
+MODULE_PARM_DESC(force_boot,
+		"A value of 1 means that the driver will reboot"
+		"the system immediately if the /dev/watchdog device is closed"
+		"A value of 0 means that when /dev/watchdog device is closed"
+		"the watchdog timer will be refreshed for one more interval"
+		"of length: timer_set. At the end of this interval, the"
+		"watchdog timer will reset the system."
+		);
+
+/* there is only one device in the system now; this can be made into
+ * an array in the future if we have more than one device */
+
+static struct intel_scu_watchdog_dev watchdog_device;
+
+/* Forces restart, if force_reboot is set */
+static void watchdog_fire(void)
+{
+	if (force_boot) {
+		pr_crit("Initiating system reboot\n");
+		emergency_restart();
+		pr_crit("Reboot didn't ?????\n");
+	}
+
+	else {
+		pr_crit("Immediate Reboot Disabled\n");
+		pr_crit("System will reset when watchdog timer times out!\n");
+	}
+}
+
+static int check_timer_margin(int new_margin)
+{
+	if ((new_margin < MIN_TIME_CYCLE) ||
+	    (new_margin > MAX_TIME - timer_set)) {
+		pr_debug("value of new_margin %d is out of the range %d to %d\n",
+			 new_margin, MIN_TIME_CYCLE, MAX_TIME - timer_set);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/*
+ * IPC operations
+ */
+static int watchdog_set_ipc(int soft_threshold, int threshold)
+{
+	u32	*ipc_wbuf;
+	u8	 cbuf[16] = { '\0' };
+	int	 ipc_ret = 0;
+
+	ipc_wbuf = (u32 *)&cbuf;
+	ipc_wbuf[0] = soft_threshold;
+	ipc_wbuf[1] = threshold;
+
+	ipc_ret = intel_scu_ipc_command(
+			IPC_SET_WATCHDOG_TIMER,
+			0,
+			ipc_wbuf,
+			2,
+			NULL,
+			0);
+
+	if (ipc_ret != 0)
+		pr_err("Error setting SCU watchdog timer: %x\n", ipc_ret);
+
+	return ipc_ret;
+};
+
+/*
+ *      Intel_SCU operations
+ */
+
+/* timer interrupt handler */
+static irqreturn_t watchdog_timer_interrupt(int irq, void *dev_id)
+{
+	int int_status;
+	int_status = ioread32(watchdog_device.timer_interrupt_status_addr);
+
+	pr_debug("irq, int_status: %x\n", int_status);
+
+	if (int_status != 0)
+		return IRQ_NONE;
+
+	/* has the timer been started? If not, then this is spurious */
+	if (watchdog_device.timer_started == 0) {
+		pr_debug("spurious interrupt received\n");
+		return IRQ_HANDLED;
+	}
+
+	/* temporarily disable the timer */
+	iowrite32(0x00000002, watchdog_device.timer_control_addr);
+
+	/* set the timer to the threshold */
+	iowrite32(watchdog_device.threshold,
+		  watchdog_device.timer_load_count_addr);
+
+	/* allow the timer to run */
+	iowrite32(0x00000003, watchdog_device.timer_control_addr);
+
+	return IRQ_HANDLED;
+}
+
+static int intel_scu_keepalive(void)
+{
+
+	/* read eoi register - clears interrupt */
+	ioread32(watchdog_device.timer_clear_interrupt_addr);
+
+	/* temporarily disable the timer */
+	iowrite32(0x00000002, watchdog_device.timer_control_addr);
+
+	/* set the timer to the soft_threshold */
+	iowrite32(watchdog_device.soft_threshold,
+		  watchdog_device.timer_load_count_addr);
+
+	/* allow the timer to run */
+	iowrite32(0x00000003, watchdog_device.timer_control_addr);
+
+	return 0;
+}
+
+static int intel_scu_stop(void)
+{
+	iowrite32(0, watchdog_device.timer_control_addr);
+	return 0;
+}
+
+static int intel_scu_set_heartbeat(u32 t)
+{
+	int			 ipc_ret;
+	int			 retry_count;
+	u32			 soft_value;
+	u32			 hw_value;
+
+	watchdog_device.timer_set = t;
+	watchdog_device.threshold =
+		timer_margin * watchdog_device.timer_tbl_ptr->freq_hz;
+	watchdog_device.soft_threshold =
+		(watchdog_device.timer_set - timer_margin)
+		* watchdog_device.timer_tbl_ptr->freq_hz;
+
+	pr_debug("set_heartbeat: timer freq is %d\n",
+		 watchdog_device.timer_tbl_ptr->freq_hz);
+	pr_debug("set_heartbeat: timer_set is %x (hex)\n",
+		 watchdog_device.timer_set);
+	pr_debug("set_hearbeat: timer_margin is %x (hex)\n", timer_margin);
+	pr_debug("set_heartbeat: threshold is %x (hex)\n",
+		 watchdog_device.threshold);
+	pr_debug("set_heartbeat: soft_threshold is %x (hex)\n",
+		 watchdog_device.soft_threshold);
+
+	/* Adjust thresholds by FREQ_ADJUSTMENT factor, to make the */
+	/* watchdog timing come out right. */
+	watchdog_device.threshold =
+		watchdog_device.threshold / FREQ_ADJUSTMENT;
+	watchdog_device.soft_threshold =
+		watchdog_device.soft_threshold / FREQ_ADJUSTMENT;
+
+	/* temporarily disable the timer */
+	iowrite32(0x00000002, watchdog_device.timer_control_addr);
+
+	/* send the threshold and soft_threshold via IPC to the processor */
+	ipc_ret = watchdog_set_ipc(watchdog_device.soft_threshold,
+				   watchdog_device.threshold);
+
+	if (ipc_ret != 0) {
+		/* Make sure the watchdog timer is stopped */
+		intel_scu_stop();
+		return ipc_ret;
+	}
+
+	/* Soft Threshold set loop. Early versions of silicon did */
+	/* not always set this count correctly.  This loop checks */
+	/* the value and retries if it was not set correctly.     */
+
+	retry_count = 0;
+	soft_value = watchdog_device.soft_threshold & 0xFFFF0000;
+	do {
+
+		/* Make sure timer is stopped */
+		intel_scu_stop();
+
+		if (MAX_RETRY < retry_count++) {
+			/* Unable to set timer value */
+			pr_err("Unable to set timer\n");
+			return -ENODEV;
+		}
+
+		/* set the timer to the soft threshold */
+		iowrite32(watchdog_device.soft_threshold,
+			watchdog_device.timer_load_count_addr);
+
+		/* read count value before starting timer */
+		ioread32(watchdog_device.timer_load_count_addr);
+
+		/* Start the timer */
+		iowrite32(0x00000003, watchdog_device.timer_control_addr);
+
+		/* read the value the time loaded into its count reg */
+		hw_value = ioread32(watchdog_device.timer_load_count_addr);
+		hw_value = hw_value & 0xFFFF0000;
+
+
+	} while (soft_value != hw_value);
+
+	watchdog_device.timer_started = 1;
+
+	return 0;
+}
+
+/*
+ * /dev/watchdog handling
+ */
+
+static int intel_scu_open(struct inode *inode, struct file *file)
+{
+
+	/* Set flag to indicate that watchdog device is open */
+	if (test_and_set_bit(0, &watchdog_device.driver_open))
+		return -EBUSY;
+
+	/* Check for reopen of driver. Reopens are not allowed */
+	if (watchdog_device.driver_closed)
+		return -EPERM;
+
+	return nonseekable_open(inode, file);
+}
+
+static int intel_scu_release(struct inode *inode, struct file *file)
+{
+	/*
+	 * This watchdog should not be closed, after the timer
+	 * is started with the WDIPC_SETTIMEOUT ioctl
+	 * If force_boot is set watchdog_fire() will cause an
+	 * immediate reset. If force_boot is not set, the watchdog
+	 * timer is refreshed for one more interval. At the end
+	 * of that interval, the watchdog timer will reset the system.
+	 */
+
+	if (!test_and_clear_bit(0, &watchdog_device.driver_open)) {
+		pr_debug("intel_scu_release, without open\n");
+		return -ENOTTY;
+	}
+
+	if (!watchdog_device.timer_started) {
+		/* Just close, since timer has not been started */
+		pr_debug("closed, without starting timer\n");
+		return 0;
+	}
+
+	pr_crit("Unexpected close of /dev/watchdog!\n");
+
+	/* Since the timer was started, prevent future reopens */
+	watchdog_device.driver_closed = 1;
+
+	/* Refresh the timer for one more interval */
+	intel_scu_keepalive();
+
+	/* Reboot system (if force_boot is set) */
+	watchdog_fire();
+
+	/* We should only reach this point if force_boot is not set */
+	return 0;
+}
+
+static ssize_t intel_scu_write(struct file *file,
+			      char const *data,
+			      size_t len,
+			      loff_t *ppos)
+{
+
+	if (watchdog_device.timer_started)
+		/* Watchdog already started, keep it alive */
+		intel_scu_keepalive();
+	else
+		/* Start watchdog with timer value set by init */
+		intel_scu_set_heartbeat(watchdog_device.timer_set);
+
+	return len;
+}
+
+static long intel_scu_ioctl(struct file *file,
+			   unsigned int cmd,
+			   unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	u32 __user *p = argp;
+	u32 new_margin;
+
+
+	static const struct watchdog_info ident = {
+		.options =          WDIOF_SETTIMEOUT
+				    | WDIOF_KEEPALIVEPING,
+		.firmware_version = 0,  /* @todo Get from SCU via
+						 ipc_get_scu_fw_version()? */
+		.identity =         "Intel_SCU IOH Watchdog"  /* len < 32 */
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp,
+				    &ident,
+				    sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		intel_scu_keepalive();
+
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_margin, p))
+			return -EFAULT;
+
+		if (check_timer_margin(new_margin))
+			return -EINVAL;
+
+		if (intel_scu_set_heartbeat(new_margin))
+			return -EINVAL;
+		return 0;
+	case WDIOC_GETTIMEOUT:
+		return put_user(watchdog_device.soft_threshold, p);
+
+	default:
+		return -ENOTTY;
+	}
+}
+
+/*
+ *      Notifier for system down
+ */
+static int intel_scu_notify_sys(struct notifier_block *this,
+			       unsigned long code,
+			       void *another_unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		/* Turn off the watchdog timer. */
+		intel_scu_stop();
+	return NOTIFY_DONE;
+}
+
+/*
+ *      Kernel Interfaces
+ */
+static const struct file_operations intel_scu_fops = {
+	.owner          = THIS_MODULE,
+	.llseek         = no_llseek,
+	.write          = intel_scu_write,
+	.unlocked_ioctl = intel_scu_ioctl,
+	.open           = intel_scu_open,
+	.release        = intel_scu_release,
+};
+
+static int __init intel_scu_watchdog_init(void)
+{
+	int ret;
+	u32 __iomem *tmp_addr;
+
+	/*
+	 * We don't really need to check this as the SFI timer get will fail
+	 * but if we do so we can exit with a clearer reason and no noise.
+	 *
+	 * If it isn't an intel MID device then it doesn't have this watchdog
+	 */
+	if (!intel_mid_identify_cpu())
+		return -ENODEV;
+
+	/* Check boot parameters to verify that their initial values */
+	/* are in range. */
+	/* Check value of timer_set boot parameter */
+	if ((timer_set < MIN_TIME_CYCLE) ||
+	    (timer_set > MAX_TIME - MIN_TIME_CYCLE)) {
+		pr_err("value of timer_set %x (hex) is out of range from %x to %x (hex)\n",
+		       timer_set, MIN_TIME_CYCLE, MAX_TIME - MIN_TIME_CYCLE);
+		return -EINVAL;
+	}
+
+	/* Check value of timer_margin boot parameter */
+	if (check_timer_margin(timer_margin))
+		return -EINVAL;
+
+	watchdog_device.timer_tbl_ptr = sfi_get_mtmr(sfi_mtimer_num-1);
+
+	if (watchdog_device.timer_tbl_ptr == NULL) {
+		pr_debug("timer is not available\n");
+		return -ENODEV;
+	}
+	/* make sure the timer exists */
+	if (watchdog_device.timer_tbl_ptr->phys_addr == 0) {
+		pr_debug("timer %d does not have valid physical memory\n",
+			 sfi_mtimer_num);
+		return -ENODEV;
+	}
+
+	if (watchdog_device.timer_tbl_ptr->irq == 0) {
+		pr_debug("timer %d invalid irq\n", sfi_mtimer_num);
+		return -ENODEV;
+	}
+
+	tmp_addr = ioremap_nocache(watchdog_device.timer_tbl_ptr->phys_addr,
+			20);
+
+	if (tmp_addr == NULL) {
+		pr_debug("timer unable to ioremap\n");
+		return -ENOMEM;
+	}
+
+	watchdog_device.timer_load_count_addr = tmp_addr++;
+	watchdog_device.timer_current_value_addr = tmp_addr++;
+	watchdog_device.timer_control_addr = tmp_addr++;
+	watchdog_device.timer_clear_interrupt_addr = tmp_addr++;
+	watchdog_device.timer_interrupt_status_addr = tmp_addr++;
+
+	/* Set the default time values in device structure */
+
+	watchdog_device.timer_set = timer_set;
+	watchdog_device.threshold =
+		timer_margin * watchdog_device.timer_tbl_ptr->freq_hz;
+	watchdog_device.soft_threshold =
+		(watchdog_device.timer_set - timer_margin)
+		* watchdog_device.timer_tbl_ptr->freq_hz;
+
+
+	watchdog_device.intel_scu_notifier.notifier_call =
+		intel_scu_notify_sys;
+
+	ret = register_reboot_notifier(&watchdog_device.intel_scu_notifier);
+	if (ret) {
+		pr_err("cannot register notifier %d)\n", ret);
+		goto register_reboot_error;
+	}
+
+	watchdog_device.miscdev.minor = WATCHDOG_MINOR;
+	watchdog_device.miscdev.name = "watchdog";
+	watchdog_device.miscdev.fops = &intel_scu_fops;
+
+	ret = misc_register(&watchdog_device.miscdev);
+	if (ret) {
+		pr_err("cannot register miscdev %d err =%d\n",
+		       WATCHDOG_MINOR, ret);
+		goto misc_register_error;
+	}
+
+	ret = request_irq((unsigned int)watchdog_device.timer_tbl_ptr->irq,
+		watchdog_timer_interrupt,
+		IRQF_SHARED, "watchdog",
+		&watchdog_device.timer_load_count_addr);
+	if (ret) {
+		pr_err("error requesting irq %d\n", ret);
+		goto request_irq_error;
+	}
+	/* Make sure timer is disabled before returning */
+	intel_scu_stop();
+	return 0;
+
+/* error cleanup */
+
+request_irq_error:
+	misc_deregister(&watchdog_device.miscdev);
+misc_register_error:
+	unregister_reboot_notifier(&watchdog_device.intel_scu_notifier);
+register_reboot_error:
+	intel_scu_stop();
+	iounmap(watchdog_device.timer_load_count_addr);
+	return ret;
+}
+
+static void __exit intel_scu_watchdog_exit(void)
+{
+
+	misc_deregister(&watchdog_device.miscdev);
+	unregister_reboot_notifier(&watchdog_device.intel_scu_notifier);
+	/* disable the timer */
+	iowrite32(0x00000002, watchdog_device.timer_control_addr);
+	iounmap(watchdog_device.timer_load_count_addr);
+}
+
+late_initcall(intel_scu_watchdog_init);
+module_exit(intel_scu_watchdog_exit);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_DESCRIPTION("Intel SCU Watchdog Device Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(WDT_VER);
diff --git a/drivers/watchdog/intel_scu_watchdog.h b/drivers/watchdog/intel_scu_watchdog.h
new file mode 100644
index 000000000..f3ac608de
--- /dev/null
+++ b/drivers/watchdog/intel_scu_watchdog.h
@@ -0,0 +1,65 @@
+/*
+ *      Intel_SCU 0.2:  An Intel SCU IOH Based Watchdog Device
+ *			for Intel part #(s):
+ *				- AF82MP20 PCH
+ *
+ *      Copyright (C) 2009-2010 Intel Corporation. All rights reserved.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of version 2 of the GNU General
+ *      Public License as published by the Free Software Foundation.
+ *
+ *      This program is distributed in the hope that it will be
+ *      useful, but WITHOUT ANY WARRANTY; without even the implied
+ *      warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ *      PURPOSE.  See the GNU General Public License for more details.
+ *      You should have received a copy of the GNU General Public
+ *      License along with this program; if not, write to the Free
+ *      Software Foundation, Inc., 59 Temple Place - Suite 330,
+ *      Boston, MA  02111-1307, USA.
+ *      The full GNU General Public License is included in this
+ *      distribution in the file called COPYING.
+ *
+ */
+
+#ifndef __INTEL_SCU_WATCHDOG_H
+#define __INTEL_SCU_WATCHDOG_H
+
+#define WDT_VER "0.3"
+
+/* minimum time between interrupts */
+#define MIN_TIME_CYCLE 1
+
+/* Time from warning to reboot is 2 seconds */
+#define DEFAULT_SOFT_TO_HARD_MARGIN 2
+
+#define MAX_TIME 170
+
+#define DEFAULT_TIME 5
+
+#define MAX_SOFT_TO_HARD_MARGIN (MAX_TIME-MIN_TIME_CYCLE)
+
+/* Ajustment to clock tick frequency to make timing come out right */
+#define FREQ_ADJUSTMENT 8
+
+struct intel_scu_watchdog_dev {
+	ulong driver_open;
+	ulong driver_closed;
+	u32 timer_started;
+	u32 timer_set;
+	u32 threshold;
+	u32 soft_threshold;
+	u32 __iomem *timer_load_count_addr;
+	u32 __iomem *timer_current_value_addr;
+	u32 __iomem *timer_control_addr;
+	u32 __iomem *timer_clear_interrupt_addr;
+	u32 __iomem *timer_interrupt_status_addr;
+	struct sfi_timer_table_entry *timer_tbl_ptr;
+	struct notifier_block intel_scu_notifier;
+	struct miscdevice miscdev;
+};
+
+extern int sfi_mtimer_num;
+
+/* extern struct sfi_timer_table_entry *sfi_get_mtmr(int hint); */
+#endif /* __INTEL_SCU_WATCHDOG_H */
diff --git a/drivers/watchdog/iop_wdt.c b/drivers/watchdog/iop_wdt.c
new file mode 100644
index 000000000..b16013ffa
--- /dev/null
+++ b/drivers/watchdog/iop_wdt.c
@@ -0,0 +1,261 @@
+/*
+ * drivers/char/watchdog/iop_wdt.c
+ *
+ * WDT driver for Intel I/O Processors
+ * Copyright (C) 2005, Intel Corporation.
+ *
+ * Based on ixp4xx driver, Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ *	Curt E Bruns <curt.e.bruns@intel.com>
+ *	Peter Milne <peter.milne@d-tacq.com>
+ *	Dan Williams <dan.j.williams@intel.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/uaccess.h>
+#include <mach/hardware.h>
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static unsigned long wdt_status;
+static unsigned long boot_status;
+static DEFINE_SPINLOCK(wdt_lock);
+
+#define WDT_IN_USE		0
+#define WDT_OK_TO_CLOSE		1
+#define WDT_ENABLED		2
+
+static unsigned long iop_watchdog_timeout(void)
+{
+	return (0xffffffffUL / get_iop_tick_rate());
+}
+
+/**
+ * wdt_supports_disable - determine if we are accessing a iop13xx watchdog
+ * or iop3xx by whether it has a disable command
+ */
+static int wdt_supports_disable(void)
+{
+	int can_disable;
+
+	if (IOP_WDTCR_EN_ARM != IOP_WDTCR_DIS_ARM)
+		can_disable = 1;
+	else
+		can_disable = 0;
+
+	return can_disable;
+}
+
+static void wdt_enable(void)
+{
+	/* Arm and enable the Timer to starting counting down from 0xFFFF.FFFF
+	 * Takes approx. 10.7s to timeout
+	 */
+	spin_lock(&wdt_lock);
+	write_wdtcr(IOP_WDTCR_EN_ARM);
+	write_wdtcr(IOP_WDTCR_EN);
+	spin_unlock(&wdt_lock);
+}
+
+/* returns 0 if the timer was successfully disabled */
+static int wdt_disable(void)
+{
+	/* Stop Counting */
+	if (wdt_supports_disable()) {
+		spin_lock(&wdt_lock);
+		write_wdtcr(IOP_WDTCR_DIS_ARM);
+		write_wdtcr(IOP_WDTCR_DIS);
+		clear_bit(WDT_ENABLED, &wdt_status);
+		spin_unlock(&wdt_lock);
+		pr_info("Disabled\n");
+		return 0;
+	} else
+		return 1;
+}
+
+static int iop_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
+		return -EBUSY;
+
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+	wdt_enable();
+	set_bit(WDT_ENABLED, &wdt_status);
+	return nonseekable_open(inode, file);
+}
+
+static ssize_t iop_wdt_write(struct file *file, const char *data, size_t len,
+		  loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+			for (i = 0; i != len; i++) {
+				char c;
+
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					set_bit(WDT_OK_TO_CLOSE, &wdt_status);
+			}
+		}
+		wdt_enable();
+	}
+	return len;
+}
+
+static const struct watchdog_info ident = {
+	.options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+	.identity = "iop watchdog",
+};
+
+static long iop_wdt_ioctl(struct file *file,
+				unsigned int cmd, unsigned long arg)
+{
+	int options;
+	int ret = -ENOTTY;
+	int __user *argp = (int __user *)arg;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			ret = -EFAULT;
+		else
+			ret = 0;
+		break;
+
+	case WDIOC_GETSTATUS:
+		ret = put_user(0, argp);
+		break;
+
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(boot_status, argp);
+		break;
+
+	case WDIOC_SETOPTIONS:
+		if (get_user(options, (int *)arg))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD) {
+			if (!nowayout) {
+				if (wdt_disable() == 0) {
+					set_bit(WDT_OK_TO_CLOSE, &wdt_status);
+					ret = 0;
+				} else
+					ret = -ENXIO;
+			} else
+				ret = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			wdt_enable();
+			ret = 0;
+		}
+		break;
+
+	case WDIOC_KEEPALIVE:
+		wdt_enable();
+		ret = 0;
+		break;
+
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(iop_watchdog_timeout(), argp);
+		break;
+	}
+	return ret;
+}
+
+static int iop_wdt_release(struct inode *inode, struct file *file)
+{
+	int state = 1;
+	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
+		if (test_bit(WDT_ENABLED, &wdt_status))
+			state = wdt_disable();
+
+	/* if the timer is not disabled reload and notify that we are still
+	 * going down
+	 */
+	if (state != 0) {
+		wdt_enable();
+		pr_crit("Device closed unexpectedly - reset in %lu seconds\n",
+			iop_watchdog_timeout());
+	}
+
+	clear_bit(WDT_IN_USE, &wdt_status);
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+	return 0;
+}
+
+static const struct file_operations iop_wdt_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = iop_wdt_write,
+	.unlocked_ioctl = iop_wdt_ioctl,
+	.open = iop_wdt_open,
+	.release = iop_wdt_release,
+};
+
+static struct miscdevice iop_wdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &iop_wdt_fops,
+};
+
+static int __init iop_wdt_init(void)
+{
+	int ret;
+
+	/* check if the reset was caused by the watchdog timer */
+	boot_status = (read_rcsr() & IOP_RCSR_WDT) ? WDIOF_CARDRESET : 0;
+
+	/* Configure Watchdog Timeout to cause an Internal Bus (IB) Reset
+	 * NOTE: An IB Reset will Reset both cores in the IOP342
+	 */
+	write_wdtsr(IOP13XX_WDTCR_IB_RESET);
+
+	/* Register after we have the device set up so we cannot race
+	   with an open */
+	ret = misc_register(&iop_wdt_miscdev);
+	if (ret == 0)
+		pr_info("timeout %lu sec\n", iop_watchdog_timeout());
+
+	return ret;
+}
+
+static void __exit iop_wdt_exit(void)
+{
+	misc_deregister(&iop_wdt_miscdev);
+}
+
+module_init(iop_wdt_init);
+module_exit(iop_wdt_exit);
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
+
+MODULE_AUTHOR("Curt E Bruns <curt.e.bruns@intel.com>");
+MODULE_DESCRIPTION("iop watchdog timer driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c
new file mode 100644
index 000000000..41b3979a9
--- /dev/null
+++ b/drivers/watchdog/it8712f_wdt.c
@@ -0,0 +1,454 @@
+/*
+ *	IT8712F "Smart Guardian" Watchdog support
+ *
+ *	Copyright (c) 2006-2007 Jorge Boncompte - DTI2 <jorge@dti2.net>
+ *
+ *	Based on info and code taken from:
+ *
+ *	drivers/char/watchdog/scx200_wdt.c
+ *	drivers/hwmon/it87.c
+ *	IT8712F EC-LPC I/O Preliminary Specification 0.8.2
+ *	IT8712F EC-LPC I/O Preliminary Specification 0.9.3
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation; either version 2 of the
+ *	License, or (at your option) any later version.
+ *
+ *	The author(s) of this software shall not be held liable for damages
+ *	of any nature resulting due to the use of this software. This
+ *	software is provided AS-IS with no warranties.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/fs.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+
+#define DEBUG
+#define NAME "it8712f_wdt"
+
+MODULE_AUTHOR("Jorge Boncompte - DTI2 <jorge@dti2.net>");
+MODULE_DESCRIPTION("IT8712F Watchdog Driver");
+MODULE_LICENSE("GPL");
+
+static int max_units = 255;
+static int margin = 60;		/* in seconds */
+module_param(margin, int, 0);
+MODULE_PARM_DESC(margin, "Watchdog margin in seconds");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
+
+static unsigned long wdt_open;
+static unsigned expect_close;
+static unsigned char revision;
+
+/* Dog Food address - We use the game port address */
+static unsigned short address;
+
+#define	REG		0x2e	/* The register to read/write */
+#define	VAL		0x2f	/* The value to read/write */
+
+#define	LDN		0x07	/* Register: Logical device select */
+#define	DEVID		0x20	/* Register: Device ID */
+#define	DEVREV		0x22	/* Register: Device Revision */
+#define ACT_REG		0x30	/* LDN Register: Activation */
+#define BASE_REG	0x60	/* LDN Register: Base address */
+
+#define IT8712F_DEVID	0x8712
+
+#define LDN_GPIO	0x07	/* GPIO and Watch Dog Timer */
+#define LDN_GAME	0x09	/* Game Port */
+
+#define WDT_CONTROL	0x71	/* WDT Register: Control */
+#define WDT_CONFIG	0x72	/* WDT Register: Configuration */
+#define WDT_TIMEOUT	0x73	/* WDT Register: Timeout Value */
+
+#define WDT_RESET_GAME	0x10	/* Reset timer on read or write to game port */
+#define WDT_RESET_KBD	0x20	/* Reset timer on keyboard interrupt */
+#define WDT_RESET_MOUSE	0x40	/* Reset timer on mouse interrupt */
+#define WDT_RESET_CIR	0x80	/* Reset timer on consumer IR interrupt */
+
+#define WDT_UNIT_SEC	0x80	/* If 0 in MINUTES */
+
+#define WDT_OUT_PWROK	0x10	/* Pulse PWROK on timeout */
+#define WDT_OUT_KRST	0x40	/* Pulse reset on timeout */
+
+static int wdt_control_reg = WDT_RESET_GAME;
+module_param(wdt_control_reg, int, 0);
+MODULE_PARM_DESC(wdt_control_reg, "Value to write to watchdog control "
+		"register. The default WDT_RESET_GAME resets the timer on "
+		"game port reads that this driver generates. You can also "
+		"use KBD, MOUSE or CIR if you have some external way to "
+		"generate those interrupts.");
+
+static int superio_inb(int reg)
+{
+	outb(reg, REG);
+	return inb(VAL);
+}
+
+static void superio_outb(int val, int reg)
+{
+	outb(reg, REG);
+	outb(val, VAL);
+}
+
+static int superio_inw(int reg)
+{
+	int val;
+	outb(reg++, REG);
+	val = inb(VAL) << 8;
+	outb(reg, REG);
+	val |= inb(VAL);
+	return val;
+}
+
+static inline void superio_select(int ldn)
+{
+	outb(LDN, REG);
+	outb(ldn, VAL);
+}
+
+static inline int superio_enter(void)
+{
+	/*
+	 * Try to reserve REG and REG + 1 for exclusive access.
+	 */
+	if (!request_muxed_region(REG, 2, NAME))
+		return -EBUSY;
+
+	outb(0x87, REG);
+	outb(0x01, REG);
+	outb(0x55, REG);
+	outb(0x55, REG);
+	return 0;
+}
+
+static inline void superio_exit(void)
+{
+	outb(0x02, REG);
+	outb(0x02, VAL);
+	release_region(REG, 2);
+}
+
+static inline void it8712f_wdt_ping(void)
+{
+	if (wdt_control_reg & WDT_RESET_GAME)
+		inb(address);
+}
+
+static void it8712f_wdt_update_margin(void)
+{
+	int config = WDT_OUT_KRST | WDT_OUT_PWROK;
+	int units = margin;
+
+	/* Switch to minutes precision if the configured margin
+	 * value does not fit within the register width.
+	 */
+	if (units <= max_units) {
+		config |= WDT_UNIT_SEC; /* else UNIT is MINUTES */
+		pr_info("timer margin %d seconds\n", units);
+	} else {
+		units /= 60;
+		pr_info("timer margin %d minutes\n", units);
+	}
+	superio_outb(config, WDT_CONFIG);
+
+	if (revision >= 0x08)
+		superio_outb(units >> 8, WDT_TIMEOUT + 1);
+	superio_outb(units, WDT_TIMEOUT);
+}
+
+static int it8712f_wdt_get_status(void)
+{
+	if (superio_inb(WDT_CONTROL) & 0x01)
+		return WDIOF_CARDRESET;
+	else
+		return 0;
+}
+
+static int it8712f_wdt_enable(void)
+{
+	int ret = superio_enter();
+	if (ret)
+		return ret;
+
+	pr_debug("enabling watchdog timer\n");
+	superio_select(LDN_GPIO);
+
+	superio_outb(wdt_control_reg, WDT_CONTROL);
+
+	it8712f_wdt_update_margin();
+
+	superio_exit();
+
+	it8712f_wdt_ping();
+
+	return 0;
+}
+
+static int it8712f_wdt_disable(void)
+{
+	int ret = superio_enter();
+	if (ret)
+		return ret;
+
+	pr_debug("disabling watchdog timer\n");
+	superio_select(LDN_GPIO);
+
+	superio_outb(0, WDT_CONFIG);
+	superio_outb(0, WDT_CONTROL);
+	if (revision >= 0x08)
+		superio_outb(0, WDT_TIMEOUT + 1);
+	superio_outb(0, WDT_TIMEOUT);
+
+	superio_exit();
+	return 0;
+}
+
+static int it8712f_wdt_notify(struct notifier_block *this,
+		    unsigned long code, void *unused)
+{
+	if (code == SYS_HALT || code == SYS_POWER_OFF)
+		if (!nowayout)
+			it8712f_wdt_disable();
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block it8712f_wdt_notifier = {
+	.notifier_call = it8712f_wdt_notify,
+};
+
+static ssize_t it8712f_wdt_write(struct file *file, const char __user *data,
+					size_t len, loff_t *ppos)
+{
+	/* check for a magic close character */
+	if (len) {
+		size_t i;
+
+		it8712f_wdt_ping();
+
+		expect_close = 0;
+		for (i = 0; i < len; ++i) {
+			char c;
+			if (get_user(c, data + i))
+				return -EFAULT;
+			if (c == 'V')
+				expect_close = 42;
+		}
+	}
+
+	return len;
+}
+
+static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static const struct watchdog_info ident = {
+		.identity = "IT8712F Watchdog",
+		.firmware_version = 1,
+		.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+						WDIOF_MAGICCLOSE,
+	};
+	int value;
+	int ret;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		return 0;
+	case WDIOC_GETSTATUS:
+		ret = superio_enter();
+		if (ret)
+			return ret;
+		superio_select(LDN_GPIO);
+
+		value = it8712f_wdt_get_status();
+
+		superio_exit();
+
+		return put_user(value, p);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		it8712f_wdt_ping();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(value, p))
+			return -EFAULT;
+		if (value < 1)
+			return -EINVAL;
+		if (value > (max_units * 60))
+			return -EINVAL;
+		margin = value;
+		ret = superio_enter();
+		if (ret)
+			return ret;
+		superio_select(LDN_GPIO);
+
+		it8712f_wdt_update_margin();
+
+		superio_exit();
+		it8712f_wdt_ping();
+		/* Fall through */
+	case WDIOC_GETTIMEOUT:
+		if (put_user(margin, p))
+			return -EFAULT;
+		return 0;
+	default:
+		return -ENOTTY;
+	}
+}
+
+static int it8712f_wdt_open(struct inode *inode, struct file *file)
+{
+	int ret;
+	/* only allow one at a time */
+	if (test_and_set_bit(0, &wdt_open))
+		return -EBUSY;
+
+	ret = it8712f_wdt_enable();
+	if (ret)
+		return ret;
+	return nonseekable_open(inode, file);
+}
+
+static int it8712f_wdt_release(struct inode *inode, struct file *file)
+{
+	if (expect_close != 42) {
+		pr_warn("watchdog device closed unexpectedly, will not disable the watchdog timer\n");
+	} else if (!nowayout) {
+		if (it8712f_wdt_disable())
+			pr_warn("Watchdog disable failed\n");
+	}
+	expect_close = 0;
+	clear_bit(0, &wdt_open);
+
+	return 0;
+}
+
+static const struct file_operations it8712f_wdt_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = it8712f_wdt_write,
+	.unlocked_ioctl = it8712f_wdt_ioctl,
+	.open = it8712f_wdt_open,
+	.release = it8712f_wdt_release,
+};
+
+static struct miscdevice it8712f_wdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &it8712f_wdt_fops,
+};
+
+static int __init it8712f_wdt_find(unsigned short *address)
+{
+	int err = -ENODEV;
+	int chip_type;
+	int ret = superio_enter();
+	if (ret)
+		return ret;
+
+	chip_type = superio_inw(DEVID);
+	if (chip_type != IT8712F_DEVID)
+		goto exit;
+
+	superio_select(LDN_GAME);
+	superio_outb(1, ACT_REG);
+	if (!(superio_inb(ACT_REG) & 0x01)) {
+		pr_err("Device not activated, skipping\n");
+		goto exit;
+	}
+
+	*address = superio_inw(BASE_REG);
+	if (*address == 0) {
+		pr_err("Base address not set, skipping\n");
+		goto exit;
+	}
+
+	err = 0;
+	revision = superio_inb(DEVREV) & 0x0f;
+
+	/* Later revisions have 16-bit values per datasheet 0.9.1 */
+	if (revision >= 0x08)
+		max_units = 65535;
+
+	if (margin > (max_units * 60))
+		margin = (max_units * 60);
+
+	pr_info("Found IT%04xF chip revision %d - using DogFood address 0x%x\n",
+		chip_type, revision, *address);
+
+exit:
+	superio_exit();
+	return err;
+}
+
+static int __init it8712f_wdt_init(void)
+{
+	int err = 0;
+
+	if (it8712f_wdt_find(&address))
+		return -ENODEV;
+
+	if (!request_region(address, 1, "IT8712F Watchdog")) {
+		pr_warn("watchdog I/O region busy\n");
+		return -EBUSY;
+	}
+
+	err = it8712f_wdt_disable();
+	if (err) {
+		pr_err("unable to disable watchdog timer\n");
+		goto out;
+	}
+
+	err = register_reboot_notifier(&it8712f_wdt_notifier);
+	if (err) {
+		pr_err("unable to register reboot notifier\n");
+		goto out;
+	}
+
+	err = misc_register(&it8712f_wdt_miscdev);
+	if (err) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, err);
+		goto reboot_out;
+	}
+
+	return 0;
+
+
+reboot_out:
+	unregister_reboot_notifier(&it8712f_wdt_notifier);
+out:
+	release_region(address, 1);
+	return err;
+}
+
+static void __exit it8712f_wdt_exit(void)
+{
+	misc_deregister(&it8712f_wdt_miscdev);
+	unregister_reboot_notifier(&it8712f_wdt_notifier);
+	release_region(address, 1);
+}
+
+module_init(it8712f_wdt_init);
+module_exit(it8712f_wdt_exit);
diff --git a/drivers/watchdog/it87_wdt.c b/drivers/watchdog/it87_wdt.c
new file mode 100644
index 000000000..e96faea24
--- /dev/null
+++ b/drivers/watchdog/it87_wdt.c
@@ -0,0 +1,365 @@
+/*
+ *	Watchdog Timer Driver
+ *	   for ITE IT87xx Environment Control - Low Pin Count Input / Output
+ *
+ *	(c) Copyright 2007  Oliver Schuster <olivers137@aol.com>
+ *
+ *	Based on softdog.c	by Alan Cox,
+ *		 83977f_wdt.c	by Jose Goncalves,
+ *		 it87.c		by Chris Gauthron, Jean Delvare
+ *
+ *	Data-sheets: Publicly available at the ITE website
+ *		    http://www.ite.com.tw/
+ *
+ *	Support of the watchdog timers, which are available on
+ *	IT8607, IT8620, IT8622, IT8625, IT8628, IT8655, IT8665, IT8686,
+ *	IT8702, IT8712, IT8716, IT8718, IT8720, IT8721, IT8726, IT8728,
+ *	and IT8783.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+#define WATCHDOG_NAME		"IT87 WDT"
+
+/* Defaults for Module Parameter */
+#define DEFAULT_TIMEOUT		60
+#define DEFAULT_TESTMODE	0
+#define DEFAULT_NOWAYOUT	WATCHDOG_NOWAYOUT
+
+/* IO Ports */
+#define REG		0x2e
+#define VAL		0x2f
+
+/* Logical device Numbers LDN */
+#define GPIO		0x07
+
+/* Configuration Registers and Functions */
+#define LDNREG		0x07
+#define CHIPID		0x20
+#define CHIPREV		0x22
+
+/* Chip Id numbers */
+#define NO_DEV_ID	0xffff
+#define IT8607_ID	0x8607
+#define IT8620_ID	0x8620
+#define IT8622_ID	0x8622
+#define IT8625_ID	0x8625
+#define IT8628_ID	0x8628
+#define IT8655_ID	0x8655
+#define IT8665_ID	0x8665
+#define IT8686_ID	0x8686
+#define IT8702_ID	0x8702
+#define IT8705_ID	0x8705
+#define IT8712_ID	0x8712
+#define IT8716_ID	0x8716
+#define IT8718_ID	0x8718
+#define IT8720_ID	0x8720
+#define IT8721_ID	0x8721
+#define IT8726_ID	0x8726	/* the data sheet suggest wrongly 0x8716 */
+#define IT8728_ID	0x8728
+#define IT8783_ID	0x8783
+
+/* GPIO Configuration Registers LDN=0x07 */
+#define WDTCTRL		0x71
+#define WDTCFG		0x72
+#define WDTVALLSB	0x73
+#define WDTVALMSB	0x74
+
+/* GPIO Bits WDTCFG */
+#define WDT_TOV1	0x80
+#define WDT_KRST	0x40
+#define WDT_TOVE	0x20
+#define WDT_PWROK	0x10 /* not in it8721 */
+#define WDT_INT_MASK	0x0f
+
+static unsigned int max_units, chip_type;
+
+static unsigned int timeout = DEFAULT_TIMEOUT;
+static int testmode = DEFAULT_TESTMODE;
+static bool nowayout = DEFAULT_NOWAYOUT;
+
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, default="
+		__MODULE_STRING(DEFAULT_TIMEOUT));
+module_param(testmode, int, 0);
+MODULE_PARM_DESC(testmode, "Watchdog test mode (1 = no reboot), default="
+		__MODULE_STRING(DEFAULT_TESTMODE));
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started, default="
+		__MODULE_STRING(WATCHDOG_NOWAYOUT));
+
+/* Superio Chip */
+
+static inline int superio_enter(void)
+{
+	/*
+	 * Try to reserve REG and REG + 1 for exclusive access.
+	 */
+	if (!request_muxed_region(REG, 2, WATCHDOG_NAME))
+		return -EBUSY;
+
+	outb(0x87, REG);
+	outb(0x01, REG);
+	outb(0x55, REG);
+	outb(0x55, REG);
+	return 0;
+}
+
+static inline void superio_exit(void)
+{
+	outb(0x02, REG);
+	outb(0x02, VAL);
+	release_region(REG, 2);
+}
+
+static inline void superio_select(int ldn)
+{
+	outb(LDNREG, REG);
+	outb(ldn, VAL);
+}
+
+static inline int superio_inb(int reg)
+{
+	outb(reg, REG);
+	return inb(VAL);
+}
+
+static inline void superio_outb(int val, int reg)
+{
+	outb(reg, REG);
+	outb(val, VAL);
+}
+
+static inline int superio_inw(int reg)
+{
+	int val;
+	outb(reg++, REG);
+	val = inb(VAL) << 8;
+	outb(reg, REG);
+	val |= inb(VAL);
+	return val;
+}
+
+static inline void superio_outw(int val, int reg)
+{
+	outb(reg++, REG);
+	outb(val >> 8, VAL);
+	outb(reg, REG);
+	outb(val, VAL);
+}
+
+/* Internal function, should be called after superio_select(GPIO) */
+static void _wdt_update_timeout(unsigned int t)
+{
+	unsigned char cfg = WDT_KRST;
+
+	if (testmode)
+		cfg = 0;
+
+	if (t <= max_units)
+		cfg |= WDT_TOV1;
+	else
+		t /= 60;
+
+	if (chip_type != IT8721_ID)
+		cfg |= WDT_PWROK;
+
+	superio_outb(cfg, WDTCFG);
+	superio_outb(t, WDTVALLSB);
+	if (max_units > 255)
+		superio_outb(t >> 8, WDTVALMSB);
+}
+
+static int wdt_update_timeout(unsigned int t)
+{
+	int ret;
+
+	ret = superio_enter();
+	if (ret)
+		return ret;
+
+	superio_select(GPIO);
+	_wdt_update_timeout(t);
+	superio_exit();
+
+	return 0;
+}
+
+static int wdt_round_time(int t)
+{
+	t += 59;
+	t -= t % 60;
+	return t;
+}
+
+/* watchdog timer handling */
+
+static int wdt_start(struct watchdog_device *wdd)
+{
+	return wdt_update_timeout(wdd->timeout);
+}
+
+static int wdt_stop(struct watchdog_device *wdd)
+{
+	return wdt_update_timeout(0);
+}
+
+/**
+ *	wdt_set_timeout - set a new timeout value with watchdog ioctl
+ *	@t: timeout value in seconds
+ *
+ *	The hardware device has a 8 or 16 bit watchdog timer (depends on
+ *	chip version) that can be configured to count seconds or minutes.
+ *
+ *	Used within WDIOC_SETTIMEOUT watchdog device ioctl.
+ */
+
+static int wdt_set_timeout(struct watchdog_device *wdd, unsigned int t)
+{
+	int ret = 0;
+
+	if (t > max_units)
+		t = wdt_round_time(t);
+
+	wdd->timeout = t;
+
+	if (watchdog_hw_running(wdd))
+		ret = wdt_update_timeout(t);
+
+	return ret;
+}
+
+static const struct watchdog_info ident = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+	.firmware_version = 1,
+	.identity = WATCHDOG_NAME,
+};
+
+static const struct watchdog_ops wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = wdt_start,
+	.stop = wdt_stop,
+	.set_timeout = wdt_set_timeout,
+};
+
+static struct watchdog_device wdt_dev = {
+	.info = &ident,
+	.ops = &wdt_ops,
+	.min_timeout = 1,
+};
+
+static int __init it87_wdt_init(void)
+{
+	u8  chip_rev;
+	int rc;
+
+	rc = superio_enter();
+	if (rc)
+		return rc;
+
+	chip_type = superio_inw(CHIPID);
+	chip_rev  = superio_inb(CHIPREV) & 0x0f;
+	superio_exit();
+
+	switch (chip_type) {
+	case IT8702_ID:
+		max_units = 255;
+		break;
+	case IT8712_ID:
+		max_units = (chip_rev < 8) ? 255 : 65535;
+		break;
+	case IT8716_ID:
+	case IT8726_ID:
+		max_units = 65535;
+		break;
+	case IT8607_ID:
+	case IT8620_ID:
+	case IT8622_ID:
+	case IT8625_ID:
+	case IT8628_ID:
+	case IT8655_ID:
+	case IT8665_ID:
+	case IT8686_ID:
+	case IT8718_ID:
+	case IT8720_ID:
+	case IT8721_ID:
+	case IT8728_ID:
+	case IT8783_ID:
+		max_units = 65535;
+		break;
+	case IT8705_ID:
+		pr_err("Unsupported Chip found, Chip %04x Revision %02x\n",
+		       chip_type, chip_rev);
+		return -ENODEV;
+	case NO_DEV_ID:
+		pr_err("no device\n");
+		return -ENODEV;
+	default:
+		pr_err("Unknown Chip found, Chip %04x Revision %04x\n",
+		       chip_type, chip_rev);
+		return -ENODEV;
+	}
+
+	rc = superio_enter();
+	if (rc)
+		return rc;
+
+	superio_select(GPIO);
+	superio_outb(WDT_TOV1, WDTCFG);
+	superio_outb(0x00, WDTCTRL);
+	superio_exit();
+
+	if (timeout < 1 || timeout > max_units * 60) {
+		timeout = DEFAULT_TIMEOUT;
+		pr_warn("Timeout value out of range, use default %d sec\n",
+			DEFAULT_TIMEOUT);
+	}
+
+	if (timeout > max_units)
+		timeout = wdt_round_time(timeout);
+
+	wdt_dev.timeout = timeout;
+	wdt_dev.max_timeout = max_units * 60;
+
+	watchdog_stop_on_reboot(&wdt_dev);
+	rc = watchdog_register_device(&wdt_dev);
+	if (rc) {
+		pr_err("Cannot register watchdog device (err=%d)\n", rc);
+		return rc;
+	}
+
+	pr_info("Chip IT%04x revision %d initialized. timeout=%d sec (nowayout=%d testmode=%d)\n",
+		chip_type, chip_rev, timeout, nowayout, testmode);
+
+	return 0;
+}
+
+static void __exit it87_wdt_exit(void)
+{
+	watchdog_unregister_device(&wdt_dev);
+}
+
+module_init(it87_wdt_init);
+module_exit(it87_wdt_exit);
+
+MODULE_AUTHOR("Oliver Schuster");
+MODULE_DESCRIPTION("Hardware Watchdog Device Driver for IT87xx EC-LPC I/O");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c
new file mode 100644
index 000000000..f20cc53ff
--- /dev/null
+++ b/drivers/watchdog/ixp4xx_wdt.c
@@ -0,0 +1,210 @@
+/*
+ * drivers/char/watchdog/ixp4xx_wdt.c
+ *
+ * Watchdog driver for Intel IXP4xx network processors
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ * Based on sa1100 driver, Copyright (C) 2000 Oleg Drokin <green@crimea.edu>
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/uaccess.h>
+#include <mach/hardware.h>
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static int heartbeat = 60;	/* (secs) Default is 1 minute */
+static unsigned long wdt_status;
+static unsigned long boot_status;
+static DEFINE_SPINLOCK(wdt_lock);
+
+#define WDT_TICK_RATE (IXP4XX_PERIPHERAL_BUS_CLOCK * 1000000UL)
+
+#define	WDT_IN_USE		0
+#define	WDT_OK_TO_CLOSE		1
+
+static void wdt_enable(void)
+{
+	spin_lock(&wdt_lock);
+	*IXP4XX_OSWK = IXP4XX_WDT_KEY;
+	*IXP4XX_OSWE = 0;
+	*IXP4XX_OSWT = WDT_TICK_RATE * heartbeat;
+	*IXP4XX_OSWE = IXP4XX_WDT_COUNT_ENABLE | IXP4XX_WDT_RESET_ENABLE;
+	*IXP4XX_OSWK = 0;
+	spin_unlock(&wdt_lock);
+}
+
+static void wdt_disable(void)
+{
+	spin_lock(&wdt_lock);
+	*IXP4XX_OSWK = IXP4XX_WDT_KEY;
+	*IXP4XX_OSWE = 0;
+	*IXP4XX_OSWK = 0;
+	spin_unlock(&wdt_lock);
+}
+
+static int ixp4xx_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
+		return -EBUSY;
+
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+	wdt_enable();
+	return nonseekable_open(inode, file);
+}
+
+static ssize_t
+ixp4xx_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+			for (i = 0; i != len; i++) {
+				char c;
+
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					set_bit(WDT_OK_TO_CLOSE, &wdt_status);
+			}
+		}
+		wdt_enable();
+	}
+	return len;
+}
+
+static const struct watchdog_info ident = {
+	.options	= WDIOF_CARDRESET | WDIOF_MAGICCLOSE |
+			  WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.identity	= "IXP4xx Watchdog",
+};
+
+
+static long ixp4xx_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	int ret = -ENOTTY;
+	int time;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = copy_to_user((struct watchdog_info *)arg, &ident,
+				   sizeof(ident)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETSTATUS:
+		ret = put_user(0, (int *)arg);
+		break;
+
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(boot_status, (int *)arg);
+		break;
+
+	case WDIOC_KEEPALIVE:
+		wdt_enable();
+		ret = 0;
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		ret = get_user(time, (int *)arg);
+		if (ret)
+			break;
+
+		if (time <= 0 || time > 60) {
+			ret = -EINVAL;
+			break;
+		}
+
+		heartbeat = time;
+		wdt_enable();
+		/* Fall through */
+
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(heartbeat, (int *)arg);
+		break;
+	}
+	return ret;
+}
+
+static int ixp4xx_wdt_release(struct inode *inode, struct file *file)
+{
+	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
+		wdt_disable();
+	else
+		pr_crit("Device closed unexpectedly - timer will not stop\n");
+	clear_bit(WDT_IN_USE, &wdt_status);
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+	return 0;
+}
+
+
+static const struct file_operations ixp4xx_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= ixp4xx_wdt_write,
+	.unlocked_ioctl	= ixp4xx_wdt_ioctl,
+	.open		= ixp4xx_wdt_open,
+	.release	= ixp4xx_wdt_release,
+};
+
+static struct miscdevice ixp4xx_wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &ixp4xx_wdt_fops,
+};
+
+static int __init ixp4xx_wdt_init(void)
+{
+	int ret;
+
+	if (!(read_cpuid_id() & 0xf) && !cpu_is_ixp46x()) {
+		pr_err("Rev. A0 IXP42x CPU detected - watchdog disabled\n");
+
+		return -ENODEV;
+	}
+	boot_status = (*IXP4XX_OSST & IXP4XX_OSST_TIMER_WARM_RESET) ?
+			WDIOF_CARDRESET : 0;
+	ret = misc_register(&ixp4xx_wdt_miscdev);
+	if (ret == 0)
+		pr_info("timer heartbeat %d sec\n", heartbeat);
+	return ret;
+}
+
+static void __exit ixp4xx_wdt_exit(void)
+{
+	misc_deregister(&ixp4xx_wdt_miscdev);
+}
+
+
+module_init(ixp4xx_wdt_init);
+module_exit(ixp4xx_wdt_exit);
+
+MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>");
+MODULE_DESCRIPTION("IXP4xx Network Processor Watchdog");
+
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 60s)");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/jz4740_wdt.c b/drivers/watchdog/jz4740_wdt.c
new file mode 100644
index 000000000..ec4d99a83
--- /dev/null
+++ b/drivers/watchdog/jz4740_wdt.c
@@ -0,0 +1,222 @@
+/*
+ *  Copyright (C) 2010, Paul Cercueil <paul@crapouillou.net>
+ *  JZ4740 Watchdog driver
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under  the terms of the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+
+#include <asm/mach-jz4740/timer.h>
+
+#define JZ_REG_WDT_TIMER_DATA     0x0
+#define JZ_REG_WDT_COUNTER_ENABLE 0x4
+#define JZ_REG_WDT_TIMER_COUNTER  0x8
+#define JZ_REG_WDT_TIMER_CONTROL  0xC
+
+#define JZ_WDT_CLOCK_PCLK 0x1
+#define JZ_WDT_CLOCK_RTC  0x2
+#define JZ_WDT_CLOCK_EXT  0x4
+
+#define JZ_WDT_CLOCK_DIV_SHIFT   3
+
+#define JZ_WDT_CLOCK_DIV_1    (0 << JZ_WDT_CLOCK_DIV_SHIFT)
+#define JZ_WDT_CLOCK_DIV_4    (1 << JZ_WDT_CLOCK_DIV_SHIFT)
+#define JZ_WDT_CLOCK_DIV_16   (2 << JZ_WDT_CLOCK_DIV_SHIFT)
+#define JZ_WDT_CLOCK_DIV_64   (3 << JZ_WDT_CLOCK_DIV_SHIFT)
+#define JZ_WDT_CLOCK_DIV_256  (4 << JZ_WDT_CLOCK_DIV_SHIFT)
+#define JZ_WDT_CLOCK_DIV_1024 (5 << JZ_WDT_CLOCK_DIV_SHIFT)
+
+#define DEFAULT_HEARTBEAT 5
+#define MAX_HEARTBEAT     2048
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		 "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static unsigned int heartbeat = DEFAULT_HEARTBEAT;
+module_param(heartbeat, uint, 0);
+MODULE_PARM_DESC(heartbeat,
+		"Watchdog heartbeat period in seconds from 1 to "
+		__MODULE_STRING(MAX_HEARTBEAT) ", default "
+		__MODULE_STRING(DEFAULT_HEARTBEAT));
+
+struct jz4740_wdt_drvdata {
+	struct watchdog_device wdt;
+	void __iomem *base;
+	struct clk *rtc_clk;
+};
+
+static int jz4740_wdt_ping(struct watchdog_device *wdt_dev)
+{
+	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+
+	writew(0x0, drvdata->base + JZ_REG_WDT_TIMER_COUNTER);
+	return 0;
+}
+
+static int jz4740_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				    unsigned int new_timeout)
+{
+	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+	unsigned int rtc_clk_rate;
+	unsigned int timeout_value;
+	unsigned short clock_div = JZ_WDT_CLOCK_DIV_1;
+
+	rtc_clk_rate = clk_get_rate(drvdata->rtc_clk);
+
+	timeout_value = rtc_clk_rate * new_timeout;
+	while (timeout_value > 0xffff) {
+		if (clock_div == JZ_WDT_CLOCK_DIV_1024) {
+			/* Requested timeout too high;
+			* use highest possible value. */
+			timeout_value = 0xffff;
+			break;
+		}
+		timeout_value >>= 2;
+		clock_div += (1 << JZ_WDT_CLOCK_DIV_SHIFT);
+	}
+
+	writeb(0x0, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE);
+	writew(clock_div, drvdata->base + JZ_REG_WDT_TIMER_CONTROL);
+
+	writew((u16)timeout_value, drvdata->base + JZ_REG_WDT_TIMER_DATA);
+	writew(0x0, drvdata->base + JZ_REG_WDT_TIMER_COUNTER);
+	writew(clock_div | JZ_WDT_CLOCK_RTC,
+		drvdata->base + JZ_REG_WDT_TIMER_CONTROL);
+
+	writeb(0x1, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE);
+
+	wdt_dev->timeout = new_timeout;
+	return 0;
+}
+
+static int jz4740_wdt_start(struct watchdog_device *wdt_dev)
+{
+	jz4740_timer_enable_watchdog();
+	jz4740_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
+
+	return 0;
+}
+
+static int jz4740_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+
+	writeb(0x0, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE);
+	jz4740_timer_disable_watchdog();
+
+	return 0;
+}
+
+static int jz4740_wdt_restart(struct watchdog_device *wdt_dev,
+			      unsigned long action, void *data)
+{
+	wdt_dev->timeout = 0;
+	jz4740_wdt_start(wdt_dev);
+	return 0;
+}
+
+static const struct watchdog_info jz4740_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "jz4740 Watchdog",
+};
+
+static const struct watchdog_ops jz4740_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = jz4740_wdt_start,
+	.stop = jz4740_wdt_stop,
+	.ping = jz4740_wdt_ping,
+	.set_timeout = jz4740_wdt_set_timeout,
+	.restart = jz4740_wdt_restart,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id jz4740_wdt_of_matches[] = {
+	{ .compatible = "ingenic,jz4740-watchdog", },
+	{ .compatible = "ingenic,jz4780-watchdog", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, jz4740_wdt_of_matches);
+#endif
+
+static int jz4740_wdt_probe(struct platform_device *pdev)
+{
+	struct jz4740_wdt_drvdata *drvdata;
+	struct watchdog_device *jz4740_wdt;
+	struct resource	*res;
+	int ret;
+
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct jz4740_wdt_drvdata),
+			       GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
+	if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
+		heartbeat = DEFAULT_HEARTBEAT;
+
+	jz4740_wdt = &drvdata->wdt;
+	jz4740_wdt->info = &jz4740_wdt_info;
+	jz4740_wdt->ops = &jz4740_wdt_ops;
+	jz4740_wdt->timeout = heartbeat;
+	jz4740_wdt->min_timeout = 1;
+	jz4740_wdt->max_timeout = MAX_HEARTBEAT;
+	jz4740_wdt->parent = &pdev->dev;
+	watchdog_set_nowayout(jz4740_wdt, nowayout);
+	watchdog_set_drvdata(jz4740_wdt, drvdata);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	drvdata->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(drvdata->base))
+		return PTR_ERR(drvdata->base);
+
+	drvdata->rtc_clk = devm_clk_get(&pdev->dev, "rtc");
+	if (IS_ERR(drvdata->rtc_clk)) {
+		dev_err(&pdev->dev, "cannot find RTC clock\n");
+		return PTR_ERR(drvdata->rtc_clk);
+	}
+
+	ret = devm_watchdog_register_device(&pdev->dev, &drvdata->wdt);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, drvdata);
+
+	return 0;
+}
+
+static struct platform_driver jz4740_wdt_driver = {
+	.probe = jz4740_wdt_probe,
+	.driver = {
+		.name = "jz4740-wdt",
+		.of_match_table = of_match_ptr(jz4740_wdt_of_matches),
+	},
+};
+
+module_platform_driver(jz4740_wdt_driver);
+
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("jz4740 Watchdog Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:jz4740-wdt");
diff --git a/drivers/watchdog/kempld_wdt.c b/drivers/watchdog/kempld_wdt.c
new file mode 100644
index 000000000..e268add43
--- /dev/null
+++ b/drivers/watchdog/kempld_wdt.c
@@ -0,0 +1,580 @@
+/*
+ * Kontron PLD watchdog driver
+ *
+ * Copyright (c) 2010-2013 Kontron Europe GmbH
+ * Author: Michael Brunner <michael.brunner@kontron.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Note: From the PLD watchdog point of view timeout and pretimeout are
+ *       defined differently than in the kernel.
+ *       First the pretimeout stage runs out before the timeout stage gets
+ *       active.
+ *
+ * Kernel/API:                     P-----| pretimeout
+ *               |-----------------------T timeout
+ * Watchdog:     |-----------------P       pretimeout_stage
+ *                                 |-----T timeout_stage
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/kempld.h>
+
+#define KEMPLD_WDT_STAGE_TIMEOUT(x)	(0x1b + (x) * 4)
+#define KEMPLD_WDT_STAGE_CFG(x)		(0x18 + (x))
+#define STAGE_CFG_GET_PRESCALER(x)	(((x) & 0x30) >> 4)
+#define STAGE_CFG_SET_PRESCALER(x)	(((x) & 0x3) << 4)
+#define STAGE_CFG_PRESCALER_MASK	0x30
+#define STAGE_CFG_ACTION_MASK		0x7
+#define STAGE_CFG_ASSERT		(1 << 3)
+
+#define KEMPLD_WDT_MAX_STAGES		2
+#define KEMPLD_WDT_KICK			0x16
+#define KEMPLD_WDT_CFG			0x17
+#define KEMPLD_WDT_CFG_ENABLE		0x10
+#define KEMPLD_WDT_CFG_ENABLE_LOCK	0x8
+#define KEMPLD_WDT_CFG_GLOBAL_LOCK	0x80
+
+enum {
+	ACTION_NONE = 0,
+	ACTION_RESET,
+	ACTION_NMI,
+	ACTION_SMI,
+	ACTION_SCI,
+	ACTION_DELAY,
+};
+
+enum {
+	STAGE_TIMEOUT = 0,
+	STAGE_PRETIMEOUT,
+};
+
+enum {
+	PRESCALER_21 = 0,
+	PRESCALER_17,
+	PRESCALER_12,
+};
+
+static const u32 kempld_prescaler[] = {
+	[PRESCALER_21] = (1 << 21) - 1,
+	[PRESCALER_17] = (1 << 17) - 1,
+	[PRESCALER_12] = (1 << 12) - 1,
+	0,
+};
+
+struct kempld_wdt_stage {
+	unsigned int	id;
+	u32		mask;
+};
+
+struct kempld_wdt_data {
+	struct kempld_device_data	*pld;
+	struct watchdog_device		wdd;
+	unsigned int			pretimeout;
+	struct kempld_wdt_stage		stage[KEMPLD_WDT_MAX_STAGES];
+#ifdef CONFIG_PM
+	u8				pm_status_store;
+#endif
+};
+
+#define DEFAULT_TIMEOUT		30 /* seconds */
+#define DEFAULT_PRETIMEOUT	0
+
+static unsigned int timeout = DEFAULT_TIMEOUT;
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. (>=0, default="
+	__MODULE_STRING(DEFAULT_TIMEOUT) ")");
+
+static unsigned int pretimeout = DEFAULT_PRETIMEOUT;
+module_param(pretimeout, uint, 0);
+MODULE_PARM_DESC(pretimeout,
+	"Watchdog pretimeout in seconds. (>=0, default="
+	__MODULE_STRING(DEFAULT_PRETIMEOUT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int kempld_wdt_set_stage_action(struct kempld_wdt_data *wdt_data,
+					struct kempld_wdt_stage *stage,
+					u8 action)
+{
+	struct kempld_device_data *pld = wdt_data->pld;
+	u8 stage_cfg;
+
+	if (!stage || !stage->mask)
+		return -EINVAL;
+
+	kempld_get_mutex(pld);
+	stage_cfg = kempld_read8(pld, KEMPLD_WDT_STAGE_CFG(stage->id));
+	stage_cfg &= ~STAGE_CFG_ACTION_MASK;
+	stage_cfg |= (action & STAGE_CFG_ACTION_MASK);
+
+	if (action == ACTION_RESET)
+		stage_cfg |= STAGE_CFG_ASSERT;
+	else
+		stage_cfg &= ~STAGE_CFG_ASSERT;
+
+	kempld_write8(pld, KEMPLD_WDT_STAGE_CFG(stage->id), stage_cfg);
+	kempld_release_mutex(pld);
+
+	return 0;
+}
+
+static int kempld_wdt_set_stage_timeout(struct kempld_wdt_data *wdt_data,
+					struct kempld_wdt_stage *stage,
+					unsigned int timeout)
+{
+	struct kempld_device_data *pld = wdt_data->pld;
+	u32 prescaler;
+	u64 stage_timeout64;
+	u32 stage_timeout;
+	u32 remainder;
+	u8 stage_cfg;
+
+	prescaler = kempld_prescaler[PRESCALER_21];
+
+	if (!stage)
+		return -EINVAL;
+
+	stage_timeout64 = (u64)timeout * pld->pld_clock;
+	remainder = do_div(stage_timeout64, prescaler);
+	if (remainder)
+		stage_timeout64++;
+
+	if (stage_timeout64 > stage->mask)
+		return -EINVAL;
+
+	stage_timeout = stage_timeout64 & stage->mask;
+
+	kempld_get_mutex(pld);
+	stage_cfg = kempld_read8(pld, KEMPLD_WDT_STAGE_CFG(stage->id));
+	stage_cfg &= ~STAGE_CFG_PRESCALER_MASK;
+	stage_cfg |= STAGE_CFG_SET_PRESCALER(PRESCALER_21);
+	kempld_write8(pld, KEMPLD_WDT_STAGE_CFG(stage->id), stage_cfg);
+	kempld_write32(pld, KEMPLD_WDT_STAGE_TIMEOUT(stage->id),
+			stage_timeout);
+	kempld_release_mutex(pld);
+
+	return 0;
+}
+
+/*
+ * kempld_get_mutex must be called prior to calling this function.
+ */
+static unsigned int kempld_wdt_get_timeout(struct kempld_wdt_data *wdt_data,
+						struct kempld_wdt_stage *stage)
+{
+	struct kempld_device_data *pld = wdt_data->pld;
+	unsigned int timeout;
+	u64 stage_timeout;
+	u32 prescaler;
+	u32 remainder;
+	u8 stage_cfg;
+
+	if (!stage->mask)
+		return 0;
+
+	stage_cfg = kempld_read8(pld, KEMPLD_WDT_STAGE_CFG(stage->id));
+	stage_timeout = kempld_read32(pld, KEMPLD_WDT_STAGE_TIMEOUT(stage->id));
+	prescaler = kempld_prescaler[STAGE_CFG_GET_PRESCALER(stage_cfg)];
+
+	stage_timeout = (stage_timeout & stage->mask) * prescaler;
+	remainder = do_div(stage_timeout, pld->pld_clock);
+	if (remainder)
+		stage_timeout++;
+
+	timeout = stage_timeout;
+	WARN_ON_ONCE(timeout != stage_timeout);
+
+	return timeout;
+}
+
+static int kempld_wdt_set_timeout(struct watchdog_device *wdd,
+					unsigned int timeout)
+{
+	struct kempld_wdt_data *wdt_data = watchdog_get_drvdata(wdd);
+	struct kempld_wdt_stage *pretimeout_stage;
+	struct kempld_wdt_stage *timeout_stage;
+	int ret;
+
+	timeout_stage = &wdt_data->stage[STAGE_TIMEOUT];
+	pretimeout_stage = &wdt_data->stage[STAGE_PRETIMEOUT];
+
+	if (pretimeout_stage->mask && wdt_data->pretimeout > 0)
+		timeout = wdt_data->pretimeout;
+
+	ret = kempld_wdt_set_stage_action(wdt_data, timeout_stage,
+						ACTION_RESET);
+	if (ret)
+		return ret;
+	ret = kempld_wdt_set_stage_timeout(wdt_data, timeout_stage,
+						timeout);
+	if (ret)
+		return ret;
+
+	wdd->timeout = timeout;
+	return 0;
+}
+
+static int kempld_wdt_set_pretimeout(struct watchdog_device *wdd,
+					unsigned int pretimeout)
+{
+	struct kempld_wdt_data *wdt_data = watchdog_get_drvdata(wdd);
+	struct kempld_wdt_stage *pretimeout_stage;
+	u8 action = ACTION_NONE;
+	int ret;
+
+	pretimeout_stage = &wdt_data->stage[STAGE_PRETIMEOUT];
+
+	if (!pretimeout_stage->mask)
+		return -ENXIO;
+
+	if (pretimeout > wdd->timeout)
+		return -EINVAL;
+
+	if (pretimeout > 0)
+		action = ACTION_NMI;
+
+	ret = kempld_wdt_set_stage_action(wdt_data, pretimeout_stage,
+						action);
+	if (ret)
+		return ret;
+	ret = kempld_wdt_set_stage_timeout(wdt_data, pretimeout_stage,
+						wdd->timeout - pretimeout);
+	if (ret)
+		return ret;
+
+	wdt_data->pretimeout = pretimeout;
+	return 0;
+}
+
+static void kempld_wdt_update_timeouts(struct kempld_wdt_data *wdt_data)
+{
+	struct kempld_device_data *pld = wdt_data->pld;
+	struct kempld_wdt_stage *pretimeout_stage;
+	struct kempld_wdt_stage *timeout_stage;
+	unsigned int pretimeout, timeout;
+
+	pretimeout_stage = &wdt_data->stage[STAGE_PRETIMEOUT];
+	timeout_stage = &wdt_data->stage[STAGE_TIMEOUT];
+
+	kempld_get_mutex(pld);
+	pretimeout = kempld_wdt_get_timeout(wdt_data, pretimeout_stage);
+	timeout = kempld_wdt_get_timeout(wdt_data, timeout_stage);
+	kempld_release_mutex(pld);
+
+	if (pretimeout)
+		wdt_data->pretimeout = timeout;
+	else
+		wdt_data->pretimeout = 0;
+
+	wdt_data->wdd.timeout = pretimeout + timeout;
+}
+
+static int kempld_wdt_start(struct watchdog_device *wdd)
+{
+	struct kempld_wdt_data *wdt_data = watchdog_get_drvdata(wdd);
+	struct kempld_device_data *pld = wdt_data->pld;
+	u8 status;
+	int ret;
+
+	ret = kempld_wdt_set_timeout(wdd, wdd->timeout);
+	if (ret)
+		return ret;
+
+	kempld_get_mutex(pld);
+	status = kempld_read8(pld, KEMPLD_WDT_CFG);
+	status |= KEMPLD_WDT_CFG_ENABLE;
+	kempld_write8(pld, KEMPLD_WDT_CFG, status);
+	status = kempld_read8(pld, KEMPLD_WDT_CFG);
+	kempld_release_mutex(pld);
+
+	/* Check if the watchdog was enabled */
+	if (!(status & KEMPLD_WDT_CFG_ENABLE))
+		return -EACCES;
+
+	return 0;
+}
+
+static int kempld_wdt_stop(struct watchdog_device *wdd)
+{
+	struct kempld_wdt_data *wdt_data = watchdog_get_drvdata(wdd);
+	struct kempld_device_data *pld = wdt_data->pld;
+	u8 status;
+
+	kempld_get_mutex(pld);
+	status = kempld_read8(pld, KEMPLD_WDT_CFG);
+	status &= ~KEMPLD_WDT_CFG_ENABLE;
+	kempld_write8(pld, KEMPLD_WDT_CFG, status);
+	status = kempld_read8(pld, KEMPLD_WDT_CFG);
+	kempld_release_mutex(pld);
+
+	/* Check if the watchdog was disabled */
+	if (status & KEMPLD_WDT_CFG_ENABLE)
+		return -EACCES;
+
+	return 0;
+}
+
+static int kempld_wdt_keepalive(struct watchdog_device *wdd)
+{
+	struct kempld_wdt_data *wdt_data = watchdog_get_drvdata(wdd);
+	struct kempld_device_data *pld = wdt_data->pld;
+
+	kempld_get_mutex(pld);
+	kempld_write8(pld, KEMPLD_WDT_KICK, 'K');
+	kempld_release_mutex(pld);
+
+	return 0;
+}
+
+static long kempld_wdt_ioctl(struct watchdog_device *wdd, unsigned int cmd,
+				unsigned long arg)
+{
+	struct kempld_wdt_data *wdt_data = watchdog_get_drvdata(wdd);
+	void __user *argp = (void __user *)arg;
+	int ret = -ENOIOCTLCMD;
+	int __user *p = argp;
+	int new_value;
+
+	switch (cmd) {
+	case WDIOC_SETPRETIMEOUT:
+		if (get_user(new_value, p))
+			return -EFAULT;
+		ret = kempld_wdt_set_pretimeout(wdd, new_value);
+		if (ret)
+			return ret;
+		ret = kempld_wdt_keepalive(wdd);
+		break;
+	case WDIOC_GETPRETIMEOUT:
+		ret = put_user(wdt_data->pretimeout, (int __user *)arg);
+		break;
+	}
+
+	return ret;
+}
+
+static int kempld_wdt_probe_stages(struct watchdog_device *wdd)
+{
+	struct kempld_wdt_data *wdt_data = watchdog_get_drvdata(wdd);
+	struct kempld_device_data *pld = wdt_data->pld;
+	struct kempld_wdt_stage *pretimeout_stage;
+	struct kempld_wdt_stage *timeout_stage;
+	u8 index, data, data_orig;
+	u32 mask;
+	int i, j;
+
+	pretimeout_stage = &wdt_data->stage[STAGE_PRETIMEOUT];
+	timeout_stage = &wdt_data->stage[STAGE_TIMEOUT];
+
+	pretimeout_stage->mask = 0;
+	timeout_stage->mask = 0;
+
+	for (i = 0; i < 3; i++) {
+		index = KEMPLD_WDT_STAGE_TIMEOUT(i);
+		mask = 0;
+
+		kempld_get_mutex(pld);
+		/* Probe each byte individually. */
+		for (j = 0; j < 4; j++) {
+			data_orig = kempld_read8(pld, index + j);
+			kempld_write8(pld, index + j, 0x00);
+			data = kempld_read8(pld, index + j);
+			/* A failed write means this byte is reserved */
+			if (data != 0x00)
+				break;
+			kempld_write8(pld, index + j, data_orig);
+			mask |= 0xff << (j * 8);
+		}
+		kempld_release_mutex(pld);
+
+		/* Assign available stages to timeout and pretimeout */
+		if (!timeout_stage->mask) {
+			timeout_stage->mask = mask;
+			timeout_stage->id = i;
+		} else {
+			if (pld->feature_mask & KEMPLD_FEATURE_BIT_NMI) {
+				pretimeout_stage->mask = timeout_stage->mask;
+				timeout_stage->mask = mask;
+				pretimeout_stage->id = timeout_stage->id;
+				timeout_stage->id = i;
+			}
+			break;
+		}
+	}
+
+	if (!timeout_stage->mask)
+		return -ENODEV;
+
+	return 0;
+}
+
+static const struct watchdog_info kempld_wdt_info = {
+	.identity	= "KEMPLD Watchdog",
+	.options	= WDIOF_SETTIMEOUT |
+			WDIOF_KEEPALIVEPING |
+			WDIOF_MAGICCLOSE |
+			WDIOF_PRETIMEOUT
+};
+
+static const struct watchdog_ops kempld_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= kempld_wdt_start,
+	.stop		= kempld_wdt_stop,
+	.ping		= kempld_wdt_keepalive,
+	.set_timeout	= kempld_wdt_set_timeout,
+	.ioctl		= kempld_wdt_ioctl,
+};
+
+static int kempld_wdt_probe(struct platform_device *pdev)
+{
+	struct kempld_device_data *pld = dev_get_drvdata(pdev->dev.parent);
+	struct kempld_wdt_data *wdt_data;
+	struct device *dev = &pdev->dev;
+	struct watchdog_device *wdd;
+	u8 status;
+	int ret = 0;
+
+	wdt_data = devm_kzalloc(dev, sizeof(*wdt_data), GFP_KERNEL);
+	if (!wdt_data)
+		return -ENOMEM;
+
+	wdt_data->pld = pld;
+	wdd = &wdt_data->wdd;
+	wdd->parent = dev;
+
+	kempld_get_mutex(pld);
+	status = kempld_read8(pld, KEMPLD_WDT_CFG);
+	kempld_release_mutex(pld);
+
+	/* Enable nowayout if watchdog is already locked */
+	if (status & (KEMPLD_WDT_CFG_ENABLE_LOCK |
+			KEMPLD_WDT_CFG_GLOBAL_LOCK)) {
+		if (!nowayout)
+			dev_warn(dev,
+				"Forcing nowayout - watchdog lock enabled!\n");
+		nowayout = true;
+	}
+
+	wdd->info = &kempld_wdt_info;
+	wdd->ops = &kempld_wdt_ops;
+
+	watchdog_set_drvdata(wdd, wdt_data);
+	watchdog_set_nowayout(wdd, nowayout);
+
+	ret = kempld_wdt_probe_stages(wdd);
+	if (ret)
+		return ret;
+
+	kempld_wdt_set_timeout(wdd, timeout);
+	kempld_wdt_set_pretimeout(wdd, pretimeout);
+
+	/* Check if watchdog is already enabled */
+	if (status & KEMPLD_WDT_CFG_ENABLE) {
+		/* Get current watchdog settings */
+		kempld_wdt_update_timeouts(wdt_data);
+		dev_info(dev, "Watchdog was already enabled\n");
+	}
+
+	platform_set_drvdata(pdev, wdt_data);
+	ret = watchdog_register_device(wdd);
+	if (ret)
+		return ret;
+
+	dev_info(dev, "Watchdog registered with %ds timeout\n", wdd->timeout);
+
+	return 0;
+}
+
+static void kempld_wdt_shutdown(struct platform_device *pdev)
+{
+	struct kempld_wdt_data *wdt_data = platform_get_drvdata(pdev);
+
+	kempld_wdt_stop(&wdt_data->wdd);
+}
+
+static int kempld_wdt_remove(struct platform_device *pdev)
+{
+	struct kempld_wdt_data *wdt_data = platform_get_drvdata(pdev);
+	struct watchdog_device *wdd = &wdt_data->wdd;
+	int ret = 0;
+
+	if (!nowayout)
+		ret = kempld_wdt_stop(wdd);
+	watchdog_unregister_device(wdd);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM
+/* Disable watchdog if it is active during suspend */
+static int kempld_wdt_suspend(struct platform_device *pdev,
+				pm_message_t message)
+{
+	struct kempld_wdt_data *wdt_data = platform_get_drvdata(pdev);
+	struct kempld_device_data *pld = wdt_data->pld;
+	struct watchdog_device *wdd = &wdt_data->wdd;
+
+	kempld_get_mutex(pld);
+	wdt_data->pm_status_store = kempld_read8(pld, KEMPLD_WDT_CFG);
+	kempld_release_mutex(pld);
+
+	kempld_wdt_update_timeouts(wdt_data);
+
+	if (wdt_data->pm_status_store & KEMPLD_WDT_CFG_ENABLE)
+		return kempld_wdt_stop(wdd);
+
+	return 0;
+}
+
+/* Enable watchdog and configure it if necessary */
+static int kempld_wdt_resume(struct platform_device *pdev)
+{
+	struct kempld_wdt_data *wdt_data = platform_get_drvdata(pdev);
+	struct watchdog_device *wdd = &wdt_data->wdd;
+
+	/*
+	 * If watchdog was stopped before suspend be sure it gets disabled
+	 * again, for the case BIOS has enabled it during resume
+	 */
+	if (wdt_data->pm_status_store & KEMPLD_WDT_CFG_ENABLE)
+		return kempld_wdt_start(wdd);
+	else
+		return kempld_wdt_stop(wdd);
+}
+#else
+#define kempld_wdt_suspend	NULL
+#define kempld_wdt_resume	NULL
+#endif
+
+static struct platform_driver kempld_wdt_driver = {
+	.driver		= {
+		.name	= "kempld-wdt",
+	},
+	.probe		= kempld_wdt_probe,
+	.remove		= kempld_wdt_remove,
+	.shutdown	= kempld_wdt_shutdown,
+	.suspend	= kempld_wdt_suspend,
+	.resume		= kempld_wdt_resume,
+};
+
+module_platform_driver(kempld_wdt_driver);
+
+MODULE_DESCRIPTION("KEM PLD Watchdog Driver");
+MODULE_AUTHOR("Michael Brunner <michael.brunner@kontron.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
new file mode 100644
index 000000000..1e41818a4
--- /dev/null
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -0,0 +1,322 @@
+/*
+ * Watchdog driver for Kendin/Micrel KS8695.
+ *
+ * (C) 2007 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <mach/hardware.h>
+
+#define KS8695_TMR_OFFSET	(0xF0000 + 0xE400)
+#define KS8695_TMR_VA		(KS8695_IO_VA + KS8695_TMR_OFFSET)
+
+/*
+ * Timer registers
+ */
+#define KS8695_TMCON		(0x00)		/* Timer Control Register */
+#define KS8695_T0TC		(0x08)		/* Timer 0 Timeout Count Register */
+#define TMCON_T0EN		(1 << 0)	/* Timer 0 Enable */
+
+/* Timer0 Timeout Counter Register */
+#define T0TC_WATCHDOG		(0xff)		/* Enable watchdog mode */
+
+#define WDT_DEFAULT_TIME	5	/* seconds */
+#define WDT_MAX_TIME		171	/* seconds */
+
+static int wdt_time = WDT_DEFAULT_TIME;
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+module_param(wdt_time, int, 0);
+MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
+					__MODULE_STRING(WDT_DEFAULT_TIME) ")");
+
+#ifdef CONFIG_WATCHDOG_NOWAYOUT
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+#endif
+
+
+static unsigned long ks8695wdt_busy;
+static DEFINE_SPINLOCK(ks8695_lock);
+
+/* ......................................................................... */
+
+/*
+ * Disable the watchdog.
+ */
+static inline void ks8695_wdt_stop(void)
+{
+	unsigned long tmcon;
+
+	spin_lock(&ks8695_lock);
+	/* disable timer0 */
+	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
+	__raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+	spin_unlock(&ks8695_lock);
+}
+
+/*
+ * Enable and reset the watchdog.
+ */
+static inline void ks8695_wdt_start(void)
+{
+	unsigned long tmcon;
+	unsigned long tval = wdt_time * KS8695_CLOCK_RATE;
+
+	spin_lock(&ks8695_lock);
+	/* disable timer0 */
+	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
+	__raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+
+	/* program timer0 */
+	__raw_writel(tval | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
+
+	/* re-enable timer0 */
+	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
+	__raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+	spin_unlock(&ks8695_lock);
+}
+
+/*
+ * Reload the watchdog timer.  (ie, pat the watchdog)
+ */
+static inline void ks8695_wdt_reload(void)
+{
+	unsigned long tmcon;
+
+	spin_lock(&ks8695_lock);
+	/* disable, then re-enable timer0 */
+	tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
+	__raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+	__raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+	spin_unlock(&ks8695_lock);
+}
+
+/*
+ * Change the watchdog time interval.
+ */
+static int ks8695_wdt_settimeout(int new_time)
+{
+	/*
+	 * All counting occurs at KS8695_CLOCK_RATE / 128 = 0.256 Hz
+	 *
+	 * Since WDV is a 16-bit counter, the maximum period is
+	 * 65536 / 0.256 = 256 seconds.
+	 */
+	if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
+		return -EINVAL;
+
+	/* Set new watchdog time. It will be used when
+	   ks8695_wdt_start() is called. */
+	wdt_time = new_time;
+	return 0;
+}
+
+/* ......................................................................... */
+
+/*
+ * Watchdog device is opened, and watchdog starts running.
+ */
+static int ks8695_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &ks8695wdt_busy))
+		return -EBUSY;
+
+	ks8695_wdt_start();
+	return nonseekable_open(inode, file);
+}
+
+/*
+ * Close the watchdog device.
+ * If CONFIG_WATCHDOG_NOWAYOUT is NOT defined then the watchdog is also
+ *  disabled.
+ */
+static int ks8695_wdt_close(struct inode *inode, struct file *file)
+{
+	/* Disable the watchdog when file is closed */
+	if (!nowayout)
+		ks8695_wdt_stop();
+	clear_bit(0, &ks8695wdt_busy);
+	return 0;
+}
+
+static const struct watchdog_info ks8695_wdt_info = {
+	.identity	= "ks8695 watchdog",
+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+};
+
+/*
+ * Handle commands from user-space.
+ */
+static long ks8695_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int new_value;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ks8695_wdt_info,
+					sizeof(ks8695_wdt_info)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+		if (get_user(new_value, p))
+			return -EFAULT;
+		if (new_value & WDIOS_DISABLECARD)
+			ks8695_wdt_stop();
+		if (new_value & WDIOS_ENABLECARD)
+			ks8695_wdt_start();
+		return 0;
+	case WDIOC_KEEPALIVE:
+		ks8695_wdt_reload();	/* pat the watchdog */
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_value, p))
+			return -EFAULT;
+		if (ks8695_wdt_settimeout(new_value))
+			return -EINVAL;
+		/* Enable new time value */
+		ks8695_wdt_start();
+		/* Return current value */
+		return put_user(wdt_time, p);
+	case WDIOC_GETTIMEOUT:
+		return put_user(wdt_time, p);
+	default:
+		return -ENOTTY;
+	}
+}
+
+/*
+ * Pat the watchdog whenever device is written to.
+ */
+static ssize_t ks8695_wdt_write(struct file *file, const char *data,
+						size_t len, loff_t *ppos)
+{
+	ks8695_wdt_reload();		/* pat the watchdog */
+	return len;
+}
+
+/* ......................................................................... */
+
+static const struct file_operations ks8695wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.unlocked_ioctl	= ks8695_wdt_ioctl,
+	.open		= ks8695_wdt_open,
+	.release	= ks8695_wdt_close,
+	.write		= ks8695_wdt_write,
+};
+
+static struct miscdevice ks8695wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &ks8695wdt_fops,
+};
+
+static int ks8695wdt_probe(struct platform_device *pdev)
+{
+	int res;
+
+	if (ks8695wdt_miscdev.parent)
+		return -EBUSY;
+	ks8695wdt_miscdev.parent = &pdev->dev;
+
+	res = misc_register(&ks8695wdt_miscdev);
+	if (res)
+		return res;
+
+	pr_info("KS8695 Watchdog Timer enabled (%d seconds%s)\n",
+		wdt_time, nowayout ? ", nowayout" : "");
+	return 0;
+}
+
+static int ks8695wdt_remove(struct platform_device *pdev)
+{
+	misc_deregister(&ks8695wdt_miscdev);
+	ks8695wdt_miscdev.parent = NULL;
+
+	return 0;
+}
+
+static void ks8695wdt_shutdown(struct platform_device *pdev)
+{
+	ks8695_wdt_stop();
+}
+
+#ifdef CONFIG_PM
+
+static int ks8695wdt_suspend(struct platform_device *pdev, pm_message_t message)
+{
+	ks8695_wdt_stop();
+	return 0;
+}
+
+static int ks8695wdt_resume(struct platform_device *pdev)
+{
+	if (ks8695wdt_busy)
+		ks8695_wdt_start();
+	return 0;
+}
+
+#else
+#define ks8695wdt_suspend NULL
+#define ks8695wdt_resume	NULL
+#endif
+
+static struct platform_driver ks8695wdt_driver = {
+	.probe		= ks8695wdt_probe,
+	.remove		= ks8695wdt_remove,
+	.shutdown	= ks8695wdt_shutdown,
+	.suspend	= ks8695wdt_suspend,
+	.resume		= ks8695wdt_resume,
+	.driver		= {
+		.name	= "ks8695_wdt",
+	},
+};
+
+static int __init ks8695_wdt_init(void)
+{
+	/* Check that the heartbeat value is within range;
+	   if not reset to the default */
+	if (ks8695_wdt_settimeout(wdt_time)) {
+		ks8695_wdt_settimeout(WDT_DEFAULT_TIME);
+		pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i"
+					", using %d\n", wdt_time, WDT_MAX_TIME);
+	}
+	return platform_driver_register(&ks8695wdt_driver);
+}
+
+static void __exit ks8695_wdt_exit(void)
+{
+	platform_driver_unregister(&ks8695wdt_driver);
+}
+
+module_init(ks8695_wdt_init);
+module_exit(ks8695_wdt_exit);
+
+MODULE_AUTHOR("Andrew Victor");
+MODULE_DESCRIPTION("Watchdog driver for KS8695");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ks8695_wdt");
diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c
new file mode 100644
index 000000000..7f43cefa0
--- /dev/null
+++ b/drivers/watchdog/lantiq_wdt.c
@@ -0,0 +1,309 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <john@phrozen.org>
+ *  Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de>
+ *  Based on EP93xx wdt driver
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/of_platform.h>
+#include <linux/uaccess.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#include <lantiq_soc.h>
+
+#define LTQ_XRX_RCU_RST_STAT		0x0014
+#define LTQ_XRX_RCU_RST_STAT_WDT	BIT(31)
+
+/* CPU0 Reset Source Register */
+#define LTQ_FALCON_SYS1_CPU0RS		0x0060
+/* reset cause mask */
+#define LTQ_FALCON_SYS1_CPU0RS_MASK	0x0007
+#define LTQ_FALCON_SYS1_CPU0RS_WDT	0x02
+
+/*
+ * Section 3.4 of the datasheet
+ * The password sequence protects the WDT control register from unintended
+ * write actions, which might cause malfunction of the WDT.
+ *
+ * essentially the following two magic passwords need to be written to allow
+ * IO access to the WDT core
+ */
+#define LTQ_WDT_PW1		0x00BE0000
+#define LTQ_WDT_PW2		0x00DC0000
+
+#define LTQ_WDT_CR		0x0	/* watchdog control register */
+#define LTQ_WDT_SR		0x8	/* watchdog status register */
+
+#define LTQ_WDT_SR_EN		(0x1 << 31)	/* enable bit */
+#define LTQ_WDT_SR_PWD		(0x3 << 26)	/* turn on power */
+#define LTQ_WDT_SR_CLKDIV	(0x3 << 24)	/* turn on clock and set */
+						/* divider to 0x40000 */
+#define LTQ_WDT_DIVIDER		0x40000
+#define LTQ_MAX_TIMEOUT		((1 << 16) - 1)	/* the reload field is 16 bit */
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+static void __iomem *ltq_wdt_membase;
+static unsigned long ltq_io_region_clk_rate;
+
+static unsigned long ltq_wdt_bootstatus;
+static unsigned long ltq_wdt_in_use;
+static int ltq_wdt_timeout = 30;
+static int ltq_wdt_ok_to_close;
+
+static void
+ltq_wdt_enable(void)
+{
+	unsigned long int timeout = ltq_wdt_timeout *
+			(ltq_io_region_clk_rate / LTQ_WDT_DIVIDER) + 0x1000;
+	if (timeout > LTQ_MAX_TIMEOUT)
+		timeout = LTQ_MAX_TIMEOUT;
+
+	/* write the first password magic */
+	ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR);
+	/* write the second magic plus the configuration and new timeout */
+	ltq_w32(LTQ_WDT_SR_EN | LTQ_WDT_SR_PWD | LTQ_WDT_SR_CLKDIV |
+		LTQ_WDT_PW2 | timeout, ltq_wdt_membase + LTQ_WDT_CR);
+}
+
+static void
+ltq_wdt_disable(void)
+{
+	/* write the first password magic */
+	ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR);
+	/*
+	 * write the second password magic with no config
+	 * this turns the watchdog off
+	 */
+	ltq_w32(LTQ_WDT_PW2, ltq_wdt_membase + LTQ_WDT_CR);
+}
+
+static ssize_t
+ltq_wdt_write(struct file *file, const char __user *data,
+		size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			ltq_wdt_ok_to_close = 0;
+			for (i = 0; i != len; i++) {
+				char c;
+
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					ltq_wdt_ok_to_close = 1;
+				else
+					ltq_wdt_ok_to_close = 0;
+			}
+		}
+		ltq_wdt_enable();
+	}
+
+	return len;
+}
+
+static struct watchdog_info ident = {
+	.options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+			WDIOF_CARDRESET,
+	.identity = "ltq_wdt",
+};
+
+static long
+ltq_wdt_ioctl(struct file *file,
+		unsigned int cmd, unsigned long arg)
+{
+	int ret = -ENOTTY;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = copy_to_user((struct watchdog_info __user *)arg, &ident,
+				sizeof(ident)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(ltq_wdt_bootstatus, (int __user *)arg);
+		break;
+
+	case WDIOC_GETSTATUS:
+		ret = put_user(0, (int __user *)arg);
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		ret = get_user(ltq_wdt_timeout, (int __user *)arg);
+		if (!ret)
+			ltq_wdt_enable();
+		/* intentional drop through */
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(ltq_wdt_timeout, (int __user *)arg);
+		break;
+
+	case WDIOC_KEEPALIVE:
+		ltq_wdt_enable();
+		ret = 0;
+		break;
+	}
+	return ret;
+}
+
+static int
+ltq_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &ltq_wdt_in_use))
+		return -EBUSY;
+	ltq_wdt_in_use = 1;
+	ltq_wdt_enable();
+
+	return nonseekable_open(inode, file);
+}
+
+static int
+ltq_wdt_release(struct inode *inode, struct file *file)
+{
+	if (ltq_wdt_ok_to_close)
+		ltq_wdt_disable();
+	else
+		pr_err("watchdog closed without warning\n");
+	ltq_wdt_ok_to_close = 0;
+	clear_bit(0, &ltq_wdt_in_use);
+
+	return 0;
+}
+
+static const struct file_operations ltq_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.write		= ltq_wdt_write,
+	.unlocked_ioctl	= ltq_wdt_ioctl,
+	.open		= ltq_wdt_open,
+	.release	= ltq_wdt_release,
+	.llseek		= no_llseek,
+};
+
+static struct miscdevice ltq_wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &ltq_wdt_fops,
+};
+
+typedef int (*ltq_wdt_bootstatus_set)(struct platform_device *pdev);
+
+static int ltq_wdt_bootstatus_xrx(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct regmap *rcu_regmap;
+	u32 val;
+	int err;
+
+	rcu_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "regmap");
+	if (IS_ERR(rcu_regmap))
+		return PTR_ERR(rcu_regmap);
+
+	err = regmap_read(rcu_regmap, LTQ_XRX_RCU_RST_STAT, &val);
+	if (err)
+		return err;
+
+	if (val & LTQ_XRX_RCU_RST_STAT_WDT)
+		ltq_wdt_bootstatus = WDIOF_CARDRESET;
+
+	return 0;
+}
+
+static int ltq_wdt_bootstatus_falcon(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct regmap *rcu_regmap;
+	u32 val;
+	int err;
+
+	rcu_regmap = syscon_regmap_lookup_by_phandle(dev->of_node,
+						     "lantiq,rcu");
+	if (IS_ERR(rcu_regmap))
+		return PTR_ERR(rcu_regmap);
+
+	err = regmap_read(rcu_regmap, LTQ_FALCON_SYS1_CPU0RS, &val);
+	if (err)
+		return err;
+
+	if ((val & LTQ_FALCON_SYS1_CPU0RS_MASK) == LTQ_FALCON_SYS1_CPU0RS_WDT)
+		ltq_wdt_bootstatus = WDIOF_CARDRESET;
+
+	return 0;
+}
+
+static int
+ltq_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct clk *clk;
+	ltq_wdt_bootstatus_set ltq_wdt_bootstatus_set;
+	int ret;
+
+	ltq_wdt_membase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ltq_wdt_membase))
+		return PTR_ERR(ltq_wdt_membase);
+
+	ltq_wdt_bootstatus_set = of_device_get_match_data(&pdev->dev);
+	if (ltq_wdt_bootstatus_set) {
+		ret = ltq_wdt_bootstatus_set(pdev);
+		if (ret)
+			return ret;
+	}
+
+	/* we do not need to enable the clock as it is always running */
+	clk = clk_get_io();
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Failed to get clock\n");
+		return -ENOENT;
+	}
+	ltq_io_region_clk_rate = clk_get_rate(clk);
+	clk_put(clk);
+
+	dev_info(&pdev->dev, "Init done\n");
+	return misc_register(&ltq_wdt_miscdev);
+}
+
+static int
+ltq_wdt_remove(struct platform_device *pdev)
+{
+	misc_deregister(&ltq_wdt_miscdev);
+
+	return 0;
+}
+
+static const struct of_device_id ltq_wdt_match[] = {
+	{ .compatible = "lantiq,wdt", .data = NULL},
+	{ .compatible = "lantiq,xrx100-wdt", .data = ltq_wdt_bootstatus_xrx },
+	{ .compatible = "lantiq,falcon-wdt", .data = ltq_wdt_bootstatus_falcon },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ltq_wdt_match);
+
+static struct platform_driver ltq_wdt_driver = {
+	.probe = ltq_wdt_probe,
+	.remove = ltq_wdt_remove,
+	.driver = {
+		.name = "wdt",
+		.of_match_table = ltq_wdt_match,
+	},
+};
+
+module_platform_driver(ltq_wdt_driver);
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
+MODULE_DESCRIPTION("Lantiq SoC Watchdog");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/loongson1_wdt.c b/drivers/watchdog/loongson1_wdt.c
new file mode 100644
index 000000000..3aee50c64
--- /dev/null
+++ b/drivers/watchdog/loongson1_wdt.c
@@ -0,0 +1,170 @@
+/*
+ * Copyright (c) 2016 Yang Ling <gnaygnil@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <loongson1.h>
+
+#define DEFAULT_HEARTBEAT	30
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0444);
+
+static unsigned int heartbeat;
+module_param(heartbeat, uint, 0444);
+
+struct ls1x_wdt_drvdata {
+	void __iomem *base;
+	struct clk *clk;
+	unsigned long clk_rate;
+	struct watchdog_device wdt;
+};
+
+static int ls1x_wdt_ping(struct watchdog_device *wdt_dev)
+{
+	struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+
+	writel(0x1, drvdata->base + WDT_SET);
+
+	return 0;
+}
+
+static int ls1x_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				unsigned int timeout)
+{
+	struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+	unsigned int max_hw_heartbeat = wdt_dev->max_hw_heartbeat_ms / 1000;
+	unsigned int counts;
+
+	wdt_dev->timeout = timeout;
+
+	counts = drvdata->clk_rate * min(timeout, max_hw_heartbeat);
+	writel(counts, drvdata->base + WDT_TIMER);
+
+	return 0;
+}
+
+static int ls1x_wdt_start(struct watchdog_device *wdt_dev)
+{
+	struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+
+	writel(0x1, drvdata->base + WDT_EN);
+
+	return 0;
+}
+
+static int ls1x_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct ls1x_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+
+	writel(0x0, drvdata->base + WDT_EN);
+
+	return 0;
+}
+
+static const struct watchdog_info ls1x_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "Loongson1 Watchdog",
+};
+
+static const struct watchdog_ops ls1x_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = ls1x_wdt_start,
+	.stop = ls1x_wdt_stop,
+	.ping = ls1x_wdt_ping,
+	.set_timeout = ls1x_wdt_set_timeout,
+};
+
+static int ls1x_wdt_probe(struct platform_device *pdev)
+{
+	struct ls1x_wdt_drvdata *drvdata;
+	struct watchdog_device *ls1x_wdt;
+	unsigned long clk_rate;
+	struct resource *res;
+	int err;
+
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	drvdata->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(drvdata->base))
+		return PTR_ERR(drvdata->base);
+
+	drvdata->clk = devm_clk_get(&pdev->dev, pdev->name);
+	if (IS_ERR(drvdata->clk))
+		return PTR_ERR(drvdata->clk);
+
+	err = clk_prepare_enable(drvdata->clk);
+	if (err) {
+		dev_err(&pdev->dev, "clk enable failed\n");
+		return err;
+	}
+
+	clk_rate = clk_get_rate(drvdata->clk);
+	if (!clk_rate) {
+		err = -EINVAL;
+		goto err0;
+	}
+	drvdata->clk_rate = clk_rate;
+
+	ls1x_wdt = &drvdata->wdt;
+	ls1x_wdt->info = &ls1x_wdt_info;
+	ls1x_wdt->ops = &ls1x_wdt_ops;
+	ls1x_wdt->timeout = DEFAULT_HEARTBEAT;
+	ls1x_wdt->min_timeout = 1;
+	ls1x_wdt->max_hw_heartbeat_ms = U32_MAX / clk_rate * 1000;
+	ls1x_wdt->parent = &pdev->dev;
+
+	watchdog_init_timeout(ls1x_wdt, heartbeat, &pdev->dev);
+	watchdog_set_nowayout(ls1x_wdt, nowayout);
+	watchdog_set_drvdata(ls1x_wdt, drvdata);
+
+	err = watchdog_register_device(&drvdata->wdt);
+	if (err) {
+		dev_err(&pdev->dev, "failed to register watchdog device\n");
+		goto err0;
+	}
+
+	platform_set_drvdata(pdev, drvdata);
+
+	dev_info(&pdev->dev, "Loongson1 Watchdog driver registered\n");
+
+	return 0;
+err0:
+	clk_disable_unprepare(drvdata->clk);
+	return err;
+}
+
+static int ls1x_wdt_remove(struct platform_device *pdev)
+{
+	struct ls1x_wdt_drvdata *drvdata = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&drvdata->wdt);
+	clk_disable_unprepare(drvdata->clk);
+
+	return 0;
+}
+
+static struct platform_driver ls1x_wdt_driver = {
+	.probe = ls1x_wdt_probe,
+	.remove = ls1x_wdt_remove,
+	.driver = {
+		.name = "ls1x-wdt",
+	},
+};
+
+module_platform_driver(ls1x_wdt_driver);
+
+MODULE_AUTHOR("Yang Ling <gnaygnil@gmail.com>");
+MODULE_DESCRIPTION("Loongson1 Watchdog Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/lpc18xx_wdt.c b/drivers/watchdog/lpc18xx_wdt.c
new file mode 100644
index 000000000..48580b640
--- /dev/null
+++ b/drivers/watchdog/lpc18xx_wdt.c
@@ -0,0 +1,332 @@
+/*
+ * NXP LPC18xx Watchdog Timer (WDT)
+ *
+ * Copyright (c) 2015 Ariel D'Alessandro <ariel@vanguardiasur.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * Notes
+ * -----
+ * The Watchdog consists of a fixed divide-by-4 clock pre-scaler and a 24-bit
+ * counter which decrements on every clock cycle.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+/* Registers */
+#define LPC18XX_WDT_MOD			0x00
+#define LPC18XX_WDT_MOD_WDEN		BIT(0)
+#define LPC18XX_WDT_MOD_WDRESET		BIT(1)
+
+#define LPC18XX_WDT_TC			0x04
+#define LPC18XX_WDT_TC_MIN		0xff
+#define LPC18XX_WDT_TC_MAX		0xffffff
+
+#define LPC18XX_WDT_FEED		0x08
+#define LPC18XX_WDT_FEED_MAGIC1		0xaa
+#define LPC18XX_WDT_FEED_MAGIC2		0x55
+
+#define LPC18XX_WDT_TV			0x0c
+
+/* Clock pre-scaler */
+#define LPC18XX_WDT_CLK_DIV		4
+
+/* Timeout values in seconds */
+#define LPC18XX_WDT_DEF_TIMEOUT		30U
+
+static int heartbeat;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds (default="
+		 __MODULE_STRING(LPC18XX_WDT_DEF_TIMEOUT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct lpc18xx_wdt_dev {
+	struct watchdog_device	wdt_dev;
+	struct clk		*reg_clk;
+	struct clk		*wdt_clk;
+	unsigned long		clk_rate;
+	void __iomem		*base;
+	struct timer_list	timer;
+	spinlock_t		lock;
+};
+
+static int lpc18xx_wdt_feed(struct watchdog_device *wdt_dev)
+{
+	struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev);
+	unsigned long flags;
+
+	/*
+	 * An abort condition will occur if an interrupt happens during the feed
+	 * sequence.
+	 */
+	spin_lock_irqsave(&lpc18xx_wdt->lock, flags);
+	writel(LPC18XX_WDT_FEED_MAGIC1, lpc18xx_wdt->base + LPC18XX_WDT_FEED);
+	writel(LPC18XX_WDT_FEED_MAGIC2, lpc18xx_wdt->base + LPC18XX_WDT_FEED);
+	spin_unlock_irqrestore(&lpc18xx_wdt->lock, flags);
+
+	return 0;
+}
+
+static void lpc18xx_wdt_timer_feed(struct timer_list *t)
+{
+	struct lpc18xx_wdt_dev *lpc18xx_wdt = from_timer(lpc18xx_wdt, t, timer);
+	struct watchdog_device *wdt_dev = &lpc18xx_wdt->wdt_dev;
+
+	lpc18xx_wdt_feed(wdt_dev);
+
+	/* Use safe value (1/2 of real timeout) */
+	mod_timer(&lpc18xx_wdt->timer, jiffies +
+		  msecs_to_jiffies((wdt_dev->timeout * MSEC_PER_SEC) / 2));
+}
+
+/*
+ * Since LPC18xx Watchdog cannot be disabled in hardware, we must keep feeding
+ * it with a timer until userspace watchdog software takes over.
+ */
+static int lpc18xx_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev);
+
+	lpc18xx_wdt_timer_feed(&lpc18xx_wdt->timer);
+
+	return 0;
+}
+
+static void __lpc18xx_wdt_set_timeout(struct lpc18xx_wdt_dev *lpc18xx_wdt)
+{
+	unsigned int val;
+
+	val = DIV_ROUND_UP(lpc18xx_wdt->wdt_dev.timeout * lpc18xx_wdt->clk_rate,
+			   LPC18XX_WDT_CLK_DIV);
+	writel(val, lpc18xx_wdt->base + LPC18XX_WDT_TC);
+}
+
+static int lpc18xx_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				   unsigned int new_timeout)
+{
+	struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev);
+
+	lpc18xx_wdt->wdt_dev.timeout = new_timeout;
+	__lpc18xx_wdt_set_timeout(lpc18xx_wdt);
+
+	return 0;
+}
+
+static unsigned int lpc18xx_wdt_get_timeleft(struct watchdog_device *wdt_dev)
+{
+	struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev);
+	unsigned int val;
+
+	val = readl(lpc18xx_wdt->base + LPC18XX_WDT_TV);
+	return (val * LPC18XX_WDT_CLK_DIV) / lpc18xx_wdt->clk_rate;
+}
+
+static int lpc18xx_wdt_start(struct watchdog_device *wdt_dev)
+{
+	struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev);
+	unsigned int val;
+
+	if (timer_pending(&lpc18xx_wdt->timer))
+		del_timer(&lpc18xx_wdt->timer);
+
+	val = readl(lpc18xx_wdt->base + LPC18XX_WDT_MOD);
+	val |= LPC18XX_WDT_MOD_WDEN;
+	val |= LPC18XX_WDT_MOD_WDRESET;
+	writel(val, lpc18xx_wdt->base + LPC18XX_WDT_MOD);
+
+	/*
+	 * Setting the WDEN bit in the WDMOD register is not sufficient to
+	 * enable the Watchdog. A valid feed sequence must be completed after
+	 * setting WDEN before the Watchdog is capable of generating a reset.
+	 */
+	lpc18xx_wdt_feed(wdt_dev);
+
+	return 0;
+}
+
+static int lpc18xx_wdt_restart(struct watchdog_device *wdt_dev,
+			       unsigned long action, void *data)
+{
+	struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev);
+	unsigned long flags;
+	int val;
+
+	/*
+	 * Incorrect feed sequence causes immediate watchdog reset if enabled.
+	 */
+	spin_lock_irqsave(&lpc18xx_wdt->lock, flags);
+
+	val = readl(lpc18xx_wdt->base + LPC18XX_WDT_MOD);
+	val |= LPC18XX_WDT_MOD_WDEN;
+	val |= LPC18XX_WDT_MOD_WDRESET;
+	writel(val, lpc18xx_wdt->base + LPC18XX_WDT_MOD);
+
+	writel(LPC18XX_WDT_FEED_MAGIC1, lpc18xx_wdt->base + LPC18XX_WDT_FEED);
+	writel(LPC18XX_WDT_FEED_MAGIC2, lpc18xx_wdt->base + LPC18XX_WDT_FEED);
+
+	writel(LPC18XX_WDT_FEED_MAGIC1, lpc18xx_wdt->base + LPC18XX_WDT_FEED);
+	writel(LPC18XX_WDT_FEED_MAGIC1, lpc18xx_wdt->base + LPC18XX_WDT_FEED);
+
+	spin_unlock_irqrestore(&lpc18xx_wdt->lock, flags);
+
+	return 0;
+}
+
+static const struct watchdog_info lpc18xx_wdt_info = {
+	.identity	= "NXP LPC18xx Watchdog",
+	.options	= WDIOF_SETTIMEOUT |
+			  WDIOF_KEEPALIVEPING |
+			  WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops lpc18xx_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= lpc18xx_wdt_start,
+	.stop		= lpc18xx_wdt_stop,
+	.ping		= lpc18xx_wdt_feed,
+	.set_timeout	= lpc18xx_wdt_set_timeout,
+	.get_timeleft	= lpc18xx_wdt_get_timeleft,
+	.restart        = lpc18xx_wdt_restart,
+};
+
+static int lpc18xx_wdt_probe(struct platform_device *pdev)
+{
+	struct lpc18xx_wdt_dev *lpc18xx_wdt;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	int ret;
+
+	lpc18xx_wdt = devm_kzalloc(dev, sizeof(*lpc18xx_wdt), GFP_KERNEL);
+	if (!lpc18xx_wdt)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	lpc18xx_wdt->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(lpc18xx_wdt->base))
+		return PTR_ERR(lpc18xx_wdt->base);
+
+	lpc18xx_wdt->reg_clk = devm_clk_get(dev, "reg");
+	if (IS_ERR(lpc18xx_wdt->reg_clk)) {
+		dev_err(dev, "failed to get the reg clock\n");
+		return PTR_ERR(lpc18xx_wdt->reg_clk);
+	}
+
+	lpc18xx_wdt->wdt_clk = devm_clk_get(dev, "wdtclk");
+	if (IS_ERR(lpc18xx_wdt->wdt_clk)) {
+		dev_err(dev, "failed to get the wdt clock\n");
+		return PTR_ERR(lpc18xx_wdt->wdt_clk);
+	}
+
+	ret = clk_prepare_enable(lpc18xx_wdt->reg_clk);
+	if (ret) {
+		dev_err(dev, "could not prepare or enable sys clock\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(lpc18xx_wdt->wdt_clk);
+	if (ret) {
+		dev_err(dev, "could not prepare or enable wdt clock\n");
+		goto disable_reg_clk;
+	}
+
+	/* We use the clock rate to calculate timeouts */
+	lpc18xx_wdt->clk_rate = clk_get_rate(lpc18xx_wdt->wdt_clk);
+	if (lpc18xx_wdt->clk_rate == 0) {
+		dev_err(dev, "failed to get clock rate\n");
+		ret = -EINVAL;
+		goto disable_wdt_clk;
+	}
+
+	lpc18xx_wdt->wdt_dev.info = &lpc18xx_wdt_info;
+	lpc18xx_wdt->wdt_dev.ops = &lpc18xx_wdt_ops;
+
+	lpc18xx_wdt->wdt_dev.min_timeout = DIV_ROUND_UP(LPC18XX_WDT_TC_MIN *
+				LPC18XX_WDT_CLK_DIV, lpc18xx_wdt->clk_rate);
+
+	lpc18xx_wdt->wdt_dev.max_timeout = (LPC18XX_WDT_TC_MAX *
+				LPC18XX_WDT_CLK_DIV) / lpc18xx_wdt->clk_rate;
+
+	lpc18xx_wdt->wdt_dev.timeout = min(lpc18xx_wdt->wdt_dev.max_timeout,
+					   LPC18XX_WDT_DEF_TIMEOUT);
+
+	spin_lock_init(&lpc18xx_wdt->lock);
+
+	lpc18xx_wdt->wdt_dev.parent = dev;
+	watchdog_set_drvdata(&lpc18xx_wdt->wdt_dev, lpc18xx_wdt);
+
+	watchdog_init_timeout(&lpc18xx_wdt->wdt_dev, heartbeat, dev);
+
+	__lpc18xx_wdt_set_timeout(lpc18xx_wdt);
+
+	timer_setup(&lpc18xx_wdt->timer, lpc18xx_wdt_timer_feed, 0);
+
+	watchdog_set_nowayout(&lpc18xx_wdt->wdt_dev, nowayout);
+	watchdog_set_restart_priority(&lpc18xx_wdt->wdt_dev, 128);
+
+	platform_set_drvdata(pdev, lpc18xx_wdt);
+
+	ret = watchdog_register_device(&lpc18xx_wdt->wdt_dev);
+	if (ret)
+		goto disable_wdt_clk;
+
+	return 0;
+
+disable_wdt_clk:
+	clk_disable_unprepare(lpc18xx_wdt->wdt_clk);
+disable_reg_clk:
+	clk_disable_unprepare(lpc18xx_wdt->reg_clk);
+	return ret;
+}
+
+static void lpc18xx_wdt_shutdown(struct platform_device *pdev)
+{
+	struct lpc18xx_wdt_dev *lpc18xx_wdt = platform_get_drvdata(pdev);
+
+	lpc18xx_wdt_stop(&lpc18xx_wdt->wdt_dev);
+}
+
+static int lpc18xx_wdt_remove(struct platform_device *pdev)
+{
+	struct lpc18xx_wdt_dev *lpc18xx_wdt = platform_get_drvdata(pdev);
+
+	dev_warn(&pdev->dev, "I quit now, hardware will probably reboot!\n");
+	del_timer_sync(&lpc18xx_wdt->timer);
+
+	watchdog_unregister_device(&lpc18xx_wdt->wdt_dev);
+	clk_disable_unprepare(lpc18xx_wdt->wdt_clk);
+	clk_disable_unprepare(lpc18xx_wdt->reg_clk);
+
+	return 0;
+}
+
+static const struct of_device_id lpc18xx_wdt_match[] = {
+	{ .compatible = "nxp,lpc1850-wwdt" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_wdt_match);
+
+static struct platform_driver lpc18xx_wdt_driver = {
+	.driver = {
+		.name = "lpc18xx-wdt",
+		.of_match_table	= lpc18xx_wdt_match,
+	},
+	.probe = lpc18xx_wdt_probe,
+	.remove = lpc18xx_wdt_remove,
+	.shutdown = lpc18xx_wdt_shutdown,
+};
+module_platform_driver(lpc18xx_wdt_driver);
+
+MODULE_AUTHOR("Ariel D'Alessandro <ariel@vanguardiasur.com.ar>");
+MODULE_DESCRIPTION("NXP LPC18xx Watchdog Timer Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/watchdog/m54xx_wdt.c b/drivers/watchdog/m54xx_wdt.c
new file mode 100644
index 000000000..da6fa2b68
--- /dev/null
+++ b/drivers/watchdog/m54xx_wdt.c
@@ -0,0 +1,225 @@
+/*
+ * drivers/watchdog/m54xx_wdt.c
+ *
+ * Watchdog driver for ColdFire MCF547x & MCF548x processors
+ * Copyright 2010 (c) Philippe De Muyter <phdm@macqel.be>
+ *
+ * Adapted from the IXP4xx watchdog driver, which carries these notices:
+ *
+ *  Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ *  Copyright 2004 (c) MontaVista, Software, Inc.
+ *  Based on sa1100 driver, Copyright (C) 2000 Oleg Drokin <green@crimea.edu>
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/uaccess.h>
+
+#include <asm/coldfire.h>
+#include <asm/m54xxsim.h>
+#include <asm/m54xxgpt.h>
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static unsigned int heartbeat = 30;	/* (secs) Default is 0.5 minute */
+static unsigned long wdt_status;
+
+#define	WDT_IN_USE		0
+#define	WDT_OK_TO_CLOSE		1
+
+static void wdt_enable(void)
+{
+	unsigned int gms0;
+
+	/* preserve GPIO usage, if any */
+	gms0 = __raw_readl(MCF_GPT_GMS0);
+	if (gms0 & MCF_GPT_GMS_TMS_GPIO)
+		gms0 &= (MCF_GPT_GMS_TMS_GPIO | MCF_GPT_GMS_GPIO_MASK
+							| MCF_GPT_GMS_OD);
+	else
+		gms0 = MCF_GPT_GMS_TMS_GPIO | MCF_GPT_GMS_OD;
+	__raw_writel(gms0, MCF_GPT_GMS0);
+	__raw_writel(MCF_GPT_GCIR_PRE(heartbeat*(MCF_BUSCLK/0xffff)) |
+			MCF_GPT_GCIR_CNT(0xffff), MCF_GPT_GCIR0);
+	gms0 |= MCF_GPT_GMS_OCPW(0xA5) | MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE;
+	__raw_writel(gms0, MCF_GPT_GMS0);
+}
+
+static void wdt_disable(void)
+{
+	unsigned int gms0;
+
+	/* disable watchdog */
+	gms0 = __raw_readl(MCF_GPT_GMS0);
+	gms0 &= ~(MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE);
+	__raw_writel(gms0, MCF_GPT_GMS0);
+}
+
+static void wdt_keepalive(void)
+{
+	unsigned int gms0;
+
+	gms0 = __raw_readl(MCF_GPT_GMS0);
+	gms0 |= MCF_GPT_GMS_OCPW(0xA5);
+	__raw_writel(gms0, MCF_GPT_GMS0);
+}
+
+static int m54xx_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
+		return -EBUSY;
+
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+	wdt_enable();
+	return nonseekable_open(inode, file);
+}
+
+static ssize_t m54xx_wdt_write(struct file *file, const char *data,
+						size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+			for (i = 0; i != len; i++) {
+				char c;
+
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					set_bit(WDT_OK_TO_CLOSE, &wdt_status);
+			}
+		}
+		wdt_keepalive();
+	}
+	return len;
+}
+
+static const struct watchdog_info ident = {
+	.options	= WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
+				WDIOF_KEEPALIVEPING,
+	.identity	= "Coldfire M54xx Watchdog",
+};
+
+static long m54xx_wdt_ioctl(struct file *file, unsigned int cmd,
+							 unsigned long arg)
+{
+	int ret = -ENOTTY;
+	int time;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = copy_to_user((struct watchdog_info *)arg, &ident,
+				   sizeof(ident)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETSTATUS:
+		ret = put_user(0, (int *)arg);
+		break;
+
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(0, (int *)arg);
+		break;
+
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		ret = 0;
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		ret = get_user(time, (int *)arg);
+		if (ret)
+			break;
+
+		if (time <= 0 || time > 30) {
+			ret = -EINVAL;
+			break;
+		}
+
+		heartbeat = time;
+		wdt_enable();
+		/* Fall through */
+
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(heartbeat, (int *)arg);
+		break;
+	}
+	return ret;
+}
+
+static int m54xx_wdt_release(struct inode *inode, struct file *file)
+{
+	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
+		wdt_disable();
+	else {
+		pr_crit("Device closed unexpectedly - timer will not stop\n");
+		wdt_keepalive();
+	}
+	clear_bit(WDT_IN_USE, &wdt_status);
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+	return 0;
+}
+
+
+static const struct file_operations m54xx_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= m54xx_wdt_write,
+	.unlocked_ioctl	= m54xx_wdt_ioctl,
+	.open		= m54xx_wdt_open,
+	.release	= m54xx_wdt_release,
+};
+
+static struct miscdevice m54xx_wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &m54xx_wdt_fops,
+};
+
+static int __init m54xx_wdt_init(void)
+{
+	if (!request_mem_region(MCF_GPT_GCIR0, 4, "Coldfire M54xx Watchdog")) {
+		pr_warn("I/O region busy\n");
+		return -EBUSY;
+	}
+	pr_info("driver is loaded\n");
+
+	return misc_register(&m54xx_wdt_miscdev);
+}
+
+static void __exit m54xx_wdt_exit(void)
+{
+	misc_deregister(&m54xx_wdt_miscdev);
+	release_mem_region(MCF_GPT_GCIR0, 4);
+}
+
+module_init(m54xx_wdt_init);
+module_exit(m54xx_wdt_exit);
+
+MODULE_AUTHOR("Philippe De Muyter <phdm@macqel.be>");
+MODULE_DESCRIPTION("Coldfire M54xx Watchdog");
+
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 30s)");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c
new file mode 100644
index 000000000..88d823d87
--- /dev/null
+++ b/drivers/watchdog/machzwd.c
@@ -0,0 +1,456 @@
+/*
+ *  MachZ ZF-Logic Watchdog Timer driver for Linux
+ *
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ *  The author does NOT admit liability nor provide warranty for
+ *  any of this software. This material is provided "AS-IS" in
+ *  the hope that it may be useful for others.
+ *
+ *  Author: Fernando Fuganti <fuganti@conectiva.com.br>
+ *
+ *  Based on sbc60xxwdt.c by Jakob Oestergaard
+ *
+ *
+ *  We have two timers (wd#1, wd#2) driven by a 32 KHz clock with the
+ *  following periods:
+ *      wd#1 - 2 seconds;
+ *      wd#2 - 7.2 ms;
+ *  After the expiration of wd#1, it can generate a NMI, SCI, SMI, or
+ *  a system RESET and it starts wd#2 that unconditionally will RESET
+ *  the system when the counter reaches zero.
+ *
+ *  14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
+ *      Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+
+/* ports */
+#define ZF_IOBASE	0x218
+#define INDEX		0x218
+#define DATA_B		0x219
+#define DATA_W		0x21A
+#define DATA_D		0x21A
+
+/* indexes */			/* size */
+#define ZFL_VERSION	0x02	/* 16   */
+#define CONTROL		0x10	/* 16   */
+#define STATUS		0x12	/* 8    */
+#define COUNTER_1	0x0C	/* 16   */
+#define COUNTER_2	0x0E	/* 8    */
+#define PULSE_LEN	0x0F	/* 8    */
+
+/* controls */
+#define ENABLE_WD1	0x0001
+#define ENABLE_WD2	0x0002
+#define RESET_WD1	0x0010
+#define RESET_WD2	0x0020
+#define GEN_SCI		0x0100
+#define GEN_NMI		0x0200
+#define GEN_SMI		0x0400
+#define GEN_RESET	0x0800
+
+
+/* utilities */
+
+#define WD1	0
+#define WD2	1
+
+#define zf_writew(port, data)  { outb(port, INDEX); outw(data, DATA_W); }
+#define zf_writeb(port, data)  { outb(port, INDEX); outb(data, DATA_B); }
+#define zf_get_ZFL_version()   zf_readw(ZFL_VERSION)
+
+
+static unsigned short zf_readw(unsigned char port)
+{
+	outb(port, INDEX);
+	return inw(DATA_W);
+}
+
+
+MODULE_AUTHOR("Fernando Fuganti <fuganti@conectiva.com.br>");
+MODULE_DESCRIPTION("MachZ ZF-Logic Watchdog driver");
+MODULE_LICENSE("GPL");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+#define PFX "machzwd"
+
+static const struct watchdog_info zf_info = {
+	.options		= WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.firmware_version	= 1,
+	.identity		= "ZF-Logic watchdog",
+};
+
+
+/*
+ * action refers to action taken when watchdog resets
+ * 0 = GEN_RESET
+ * 1 = GEN_SMI
+ * 2 = GEN_NMI
+ * 3 = GEN_SCI
+ * defaults to GEN_RESET (0)
+ */
+static int action;
+module_param(action, int, 0);
+MODULE_PARM_DESC(action, "after watchdog resets, generate: "
+				"0 = RESET(*)  1 = SMI  2 = NMI  3 = SCI");
+
+static void zf_ping(struct timer_list *unused);
+
+static int zf_action = GEN_RESET;
+static unsigned long zf_is_open;
+static char zf_expect_close;
+static DEFINE_SPINLOCK(zf_port_lock);
+static DEFINE_TIMER(zf_timer, zf_ping);
+static unsigned long next_heartbeat;
+
+
+/* timeout for user land heart beat (10 seconds) */
+#define ZF_USER_TIMEO (HZ*10)
+
+/* timeout for hardware watchdog (~500ms) */
+#define ZF_HW_TIMEO (HZ/2)
+
+/* number of ticks on WD#1 (driven by a 32KHz clock, 2s) */
+#define ZF_CTIMEOUT 0xffff
+
+#ifndef ZF_DEBUG
+#define dprintk(format, args...)
+#else
+#define dprintk(format, args...)					\
+	pr_debug(":%s:%d: " format, __func__, __LINE__ , ## args)
+#endif
+
+
+static inline void zf_set_status(unsigned char new)
+{
+	zf_writeb(STATUS, new);
+}
+
+
+/* CONTROL register functions */
+
+static inline unsigned short zf_get_control(void)
+{
+	return zf_readw(CONTROL);
+}
+
+static inline void zf_set_control(unsigned short new)
+{
+	zf_writew(CONTROL, new);
+}
+
+
+/* WD#? counter functions */
+/*
+ *	Just set counter value
+ */
+
+static inline void zf_set_timer(unsigned short new, unsigned char n)
+{
+	switch (n) {
+	case WD1:
+		zf_writew(COUNTER_1, new);
+	case WD2:
+		zf_writeb(COUNTER_2, new > 0xff ? 0xff : new);
+	default:
+		return;
+	}
+}
+
+/*
+ * stop hardware timer
+ */
+static void zf_timer_off(void)
+{
+	unsigned int ctrl_reg = 0;
+	unsigned long flags;
+
+	/* stop internal ping */
+	del_timer_sync(&zf_timer);
+
+	spin_lock_irqsave(&zf_port_lock, flags);
+	/* stop watchdog timer */
+	ctrl_reg = zf_get_control();
+	ctrl_reg |= (ENABLE_WD1|ENABLE_WD2);	/* disable wd1 and wd2 */
+	ctrl_reg &= ~(ENABLE_WD1|ENABLE_WD2);
+	zf_set_control(ctrl_reg);
+	spin_unlock_irqrestore(&zf_port_lock, flags);
+
+	pr_info("Watchdog timer is now disabled\n");
+}
+
+
+/*
+ * start hardware timer
+ */
+static void zf_timer_on(void)
+{
+	unsigned int ctrl_reg = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&zf_port_lock, flags);
+
+	zf_writeb(PULSE_LEN, 0xff);
+
+	zf_set_timer(ZF_CTIMEOUT, WD1);
+
+	/* user land ping */
+	next_heartbeat = jiffies + ZF_USER_TIMEO;
+
+	/* start the timer for internal ping */
+	mod_timer(&zf_timer, jiffies + ZF_HW_TIMEO);
+
+	/* start watchdog timer */
+	ctrl_reg = zf_get_control();
+	ctrl_reg |= (ENABLE_WD1|zf_action);
+	zf_set_control(ctrl_reg);
+	spin_unlock_irqrestore(&zf_port_lock, flags);
+
+	pr_info("Watchdog timer is now enabled\n");
+}
+
+
+static void zf_ping(struct timer_list *unused)
+{
+	unsigned int ctrl_reg = 0;
+	unsigned long flags;
+
+	zf_writeb(COUNTER_2, 0xff);
+
+	if (time_before(jiffies, next_heartbeat)) {
+		dprintk("time_before: %ld\n", next_heartbeat - jiffies);
+		/*
+		 * reset event is activated by transition from 0 to 1 on
+		 * RESET_WD1 bit and we assume that it is already zero...
+		 */
+
+		spin_lock_irqsave(&zf_port_lock, flags);
+		ctrl_reg = zf_get_control();
+		ctrl_reg |= RESET_WD1;
+		zf_set_control(ctrl_reg);
+
+		/* ...and nothing changes until here */
+		ctrl_reg &= ~(RESET_WD1);
+		zf_set_control(ctrl_reg);
+		spin_unlock_irqrestore(&zf_port_lock, flags);
+
+		mod_timer(&zf_timer, jiffies + ZF_HW_TIMEO);
+	} else
+		pr_crit("I will reset your machine\n");
+}
+
+static ssize_t zf_write(struct file *file, const char __user *buf, size_t count,
+								loff_t *ppos)
+{
+	/* See if we got the magic character */
+	if (count) {
+		/*
+		 * no need to check for close confirmation
+		 * no way to disable watchdog ;)
+		 */
+		if (!nowayout) {
+			size_t ofs;
+			/*
+			 * note: just in case someone wrote the magic character
+			 * five months ago...
+			 */
+			zf_expect_close = 0;
+
+			/* now scan */
+			for (ofs = 0; ofs != count; ofs++) {
+				char c;
+				if (get_user(c, buf + ofs))
+					return -EFAULT;
+				if (c == 'V') {
+					zf_expect_close = 42;
+					dprintk("zf_expect_close = 42\n");
+				}
+			}
+		}
+
+		/*
+		 * Well, anyhow someone wrote to us,
+		 * we should return that favour
+		 */
+		next_heartbeat = jiffies + ZF_USER_TIMEO;
+		dprintk("user ping at %ld\n", jiffies);
+	}
+	return count;
+}
+
+static long zf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &zf_info, sizeof(zf_info)))
+			return -EFAULT;
+		break;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		zf_ping(0);
+		break;
+	default:
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+static int zf_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &zf_is_open))
+		return -EBUSY;
+	if (nowayout)
+		__module_get(THIS_MODULE);
+	zf_timer_on();
+	return nonseekable_open(inode, file);
+}
+
+static int zf_close(struct inode *inode, struct file *file)
+{
+	if (zf_expect_close == 42)
+		zf_timer_off();
+	else {
+		del_timer(&zf_timer);
+		pr_err("device file closed unexpectedly. Will not stop the WDT!\n");
+	}
+	clear_bit(0, &zf_is_open);
+	zf_expect_close = 0;
+	return 0;
+}
+
+/*
+ * Notifier for system down
+ */
+
+static int zf_notify_sys(struct notifier_block *this, unsigned long code,
+								void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		zf_timer_off();
+	return NOTIFY_DONE;
+}
+
+static const struct file_operations zf_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= zf_write,
+	.unlocked_ioctl = zf_ioctl,
+	.open		= zf_open,
+	.release	= zf_close,
+};
+
+static struct miscdevice zf_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &zf_fops,
+};
+
+
+/*
+ * The device needs to learn about soft shutdowns in order to
+ * turn the timebomb registers off.
+ */
+static struct notifier_block zf_notifier = {
+	.notifier_call = zf_notify_sys,
+};
+
+static void __init zf_show_action(int act)
+{
+	static const char * const str[] = { "RESET", "SMI", "NMI", "SCI" };
+
+	pr_info("Watchdog using action = %s\n", str[act]);
+}
+
+static int __init zf_init(void)
+{
+	int ret;
+
+	pr_info("MachZ ZF-Logic Watchdog driver initializing\n");
+
+	ret = zf_get_ZFL_version();
+	if (!ret || ret == 0xffff) {
+		pr_warn("no ZF-Logic found\n");
+		return -ENODEV;
+	}
+
+	if (action <= 3 && action >= 0)
+		zf_action = zf_action >> action;
+	else
+		action = 0;
+
+	zf_show_action(action);
+
+	if (!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")) {
+		pr_err("cannot reserve I/O ports at %d\n", ZF_IOBASE);
+		ret = -EBUSY;
+		goto no_region;
+	}
+
+	ret = register_reboot_notifier(&zf_notifier);
+	if (ret) {
+		pr_err("can't register reboot notifier (err=%d)\n", ret);
+		goto no_reboot;
+	}
+
+	ret = misc_register(&zf_miscdev);
+	if (ret) {
+		pr_err("can't misc_register on minor=%d\n", WATCHDOG_MINOR);
+		goto no_misc;
+	}
+
+	zf_set_status(0);
+	zf_set_control(0);
+
+	return 0;
+
+no_misc:
+	unregister_reboot_notifier(&zf_notifier);
+no_reboot:
+	release_region(ZF_IOBASE, 3);
+no_region:
+	return ret;
+}
+
+
+static void __exit zf_exit(void)
+{
+	zf_timer_off();
+
+	misc_deregister(&zf_miscdev);
+	unregister_reboot_notifier(&zf_notifier);
+	release_region(ZF_IOBASE, 3);
+}
+
+module_init(zf_init);
+module_exit(zf_exit);
diff --git a/drivers/watchdog/max63xx_wdt.c b/drivers/watchdog/max63xx_wdt.c
new file mode 100644
index 000000000..bf6a06824
--- /dev/null
+++ b/drivers/watchdog/max63xx_wdt.c
@@ -0,0 +1,296 @@
+/*
+ * drivers/char/watchdog/max63xx_wdt.c
+ *
+ * Driver for max63{69,70,71,72,73,74} watchdog timers
+ *
+ * Copyright (C) 2009 Marc Zyngier <maz@misterjones.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This driver assumes the watchdog pins are memory mapped (as it is
+ * the case for the Arcom Zeus). Should it be connected over GPIOs or
+ * another interface, some abstraction will have to be introduced.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/mod_devicetable.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/watchdog.h>
+#include <linux/bitops.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#define DEFAULT_HEARTBEAT 60
+#define MAX_HEARTBEAT     60
+
+static unsigned int heartbeat = DEFAULT_HEARTBEAT;
+static bool nowayout  = WATCHDOG_NOWAYOUT;
+
+/*
+ * Memory mapping: a single byte, 3 first lower bits to select bit 3
+ * to ping the watchdog.
+ */
+#define MAX6369_WDSET	(7 << 0)
+#define MAX6369_WDI	(1 << 3)
+
+#define MAX6369_WDSET_DISABLED	3
+
+static int nodelay;
+
+struct max63xx_wdt {
+	struct watchdog_device wdd;
+	const struct max63xx_timeout *timeout;
+
+	/* memory mapping */
+	void __iomem *base;
+	spinlock_t lock;
+
+	/* WDI and WSET bits write access routines */
+	void (*ping)(struct max63xx_wdt *wdt);
+	void (*set)(struct max63xx_wdt *wdt, u8 set);
+};
+
+/*
+ * The timeout values used are actually the absolute minimum the chip
+ * offers. Typical values on my board are slightly over twice as long
+ * (10s setting ends up with a 25s timeout), and can be up to 3 times
+ * the nominal setting (according to the datasheet). So please take
+ * these values with a grain of salt. Same goes for the initial delay
+ * "feature". Only max6373/74 have a few settings without this initial
+ * delay (selected with the "nodelay" parameter).
+ *
+ * I also decided to remove from the tables any timeout smaller than a
+ * second, as it looked completly overkill...
+ */
+
+/* Timeouts in second */
+struct max63xx_timeout {
+	const u8 wdset;
+	const u8 tdelay;
+	const u8 twd;
+};
+
+static const struct max63xx_timeout max6369_table[] = {
+	{ 5,  1,  1 },
+	{ 6, 10, 10 },
+	{ 7, 60, 60 },
+	{ },
+};
+
+static const struct max63xx_timeout max6371_table[] = {
+	{ 6, 60,  3 },
+	{ 7, 60, 60 },
+	{ },
+};
+
+static const struct max63xx_timeout max6373_table[] = {
+	{ 2, 60,  1 },
+	{ 5,  0,  1 },
+	{ 1,  3,  3 },
+	{ 7, 60, 10 },
+	{ 6,  0, 10 },
+	{ },
+};
+
+static struct max63xx_timeout *
+max63xx_select_timeout(struct max63xx_timeout *table, int value)
+{
+	while (table->twd) {
+		if (value <= table->twd) {
+			if (nodelay && table->tdelay == 0)
+				return table;
+
+			if (!nodelay)
+				return table;
+		}
+
+		table++;
+	}
+
+	return NULL;
+}
+
+static int max63xx_wdt_ping(struct watchdog_device *wdd)
+{
+	struct max63xx_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	wdt->ping(wdt);
+	return 0;
+}
+
+static int max63xx_wdt_start(struct watchdog_device *wdd)
+{
+	struct max63xx_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	wdt->set(wdt, wdt->timeout->wdset);
+
+	/* check for a edge triggered startup */
+	if (wdt->timeout->tdelay == 0)
+		wdt->ping(wdt);
+	return 0;
+}
+
+static int max63xx_wdt_stop(struct watchdog_device *wdd)
+{
+	struct max63xx_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	wdt->set(wdt, MAX6369_WDSET_DISABLED);
+	return 0;
+}
+
+static const struct watchdog_ops max63xx_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = max63xx_wdt_start,
+	.stop = max63xx_wdt_stop,
+	.ping = max63xx_wdt_ping,
+};
+
+static const struct watchdog_info max63xx_wdt_info = {
+	.options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "max63xx Watchdog",
+};
+
+static void max63xx_mmap_ping(struct max63xx_wdt *wdt)
+{
+	u8 val;
+
+	spin_lock(&wdt->lock);
+
+	val = __raw_readb(wdt->base);
+
+	__raw_writeb(val | MAX6369_WDI, wdt->base);
+	__raw_writeb(val & ~MAX6369_WDI, wdt->base);
+
+	spin_unlock(&wdt->lock);
+}
+
+static void max63xx_mmap_set(struct max63xx_wdt *wdt, u8 set)
+{
+	u8 val;
+
+	spin_lock(&wdt->lock);
+
+	val = __raw_readb(wdt->base);
+	val &= ~MAX6369_WDSET;
+	val |= set & MAX6369_WDSET;
+	__raw_writeb(val, wdt->base);
+
+	spin_unlock(&wdt->lock);
+}
+
+static int max63xx_mmap_init(struct platform_device *p, struct max63xx_wdt *wdt)
+{
+	struct resource *mem = platform_get_resource(p, IORESOURCE_MEM, 0);
+
+	wdt->base = devm_ioremap_resource(&p->dev, mem);
+	if (IS_ERR(wdt->base))
+		return PTR_ERR(wdt->base);
+
+	spin_lock_init(&wdt->lock);
+
+	wdt->ping = max63xx_mmap_ping;
+	wdt->set = max63xx_mmap_set;
+	return 0;
+}
+
+static int max63xx_wdt_probe(struct platform_device *pdev)
+{
+	struct max63xx_wdt *wdt;
+	struct max63xx_timeout *table;
+	int err;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	table = (struct max63xx_timeout *)pdev->id_entry->driver_data;
+
+	if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
+		heartbeat = DEFAULT_HEARTBEAT;
+
+	wdt->timeout = max63xx_select_timeout(table, heartbeat);
+	if (!wdt->timeout) {
+		dev_err(&pdev->dev, "unable to satisfy %ds heartbeat request\n",
+			heartbeat);
+		return -EINVAL;
+	}
+
+	err = max63xx_mmap_init(pdev, wdt);
+	if (err)
+		return err;
+
+	platform_set_drvdata(pdev, &wdt->wdd);
+	watchdog_set_drvdata(&wdt->wdd, wdt);
+
+	wdt->wdd.parent = &pdev->dev;
+	wdt->wdd.timeout = wdt->timeout->twd;
+	wdt->wdd.info = &max63xx_wdt_info;
+	wdt->wdd.ops = &max63xx_wdt_ops;
+
+	watchdog_set_nowayout(&wdt->wdd, nowayout);
+
+	err = watchdog_register_device(&wdt->wdd);
+	if (err)
+		return err;
+
+	dev_info(&pdev->dev, "using %ds heartbeat with %ds initial delay\n",
+		 wdt->timeout->twd, wdt->timeout->tdelay);
+	return 0;
+}
+
+static int max63xx_wdt_remove(struct platform_device *pdev)
+{
+	struct watchdog_device *wdd = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(wdd);
+	return 0;
+}
+
+static const struct platform_device_id max63xx_id_table[] = {
+	{ "max6369_wdt", (kernel_ulong_t)max6369_table, },
+	{ "max6370_wdt", (kernel_ulong_t)max6369_table, },
+	{ "max6371_wdt", (kernel_ulong_t)max6371_table, },
+	{ "max6372_wdt", (kernel_ulong_t)max6371_table, },
+	{ "max6373_wdt", (kernel_ulong_t)max6373_table, },
+	{ "max6374_wdt", (kernel_ulong_t)max6373_table, },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, max63xx_id_table);
+
+static struct platform_driver max63xx_wdt_driver = {
+	.probe		= max63xx_wdt_probe,
+	.remove		= max63xx_wdt_remove,
+	.id_table	= max63xx_id_table,
+	.driver		= {
+		.name	= "max63xx_wdt",
+	},
+};
+
+module_platform_driver(max63xx_wdt_driver);
+
+MODULE_AUTHOR("Marc Zyngier <maz@misterjones.org>");
+MODULE_DESCRIPTION("max63xx Watchdog Driver");
+
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat,
+		 "Watchdog heartbeat period in seconds from 1 to "
+		 __MODULE_STRING(MAX_HEARTBEAT) ", default "
+		 __MODULE_STRING(DEFAULT_HEARTBEAT));
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+module_param(nodelay, int, 0);
+MODULE_PARM_DESC(nodelay,
+		 "Force selection of a timeout setting without initial delay "
+		 "(max6373/74 only, default=0)");
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/watchdog/max77620_wdt.c b/drivers/watchdog/max77620_wdt.c
new file mode 100644
index 000000000..70c9cd3ba
--- /dev/null
+++ b/drivers/watchdog/max77620_wdt.c
@@ -0,0 +1,229 @@
+/*
+ * Maxim MAX77620 Watchdog Driver
+ *
+ * Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/mfd/max77620.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/watchdog.h>
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+struct max77620_wdt {
+	struct device			*dev;
+	struct regmap			*rmap;
+	struct watchdog_device		wdt_dev;
+};
+
+static int max77620_wdt_start(struct watchdog_device *wdt_dev)
+{
+	struct max77620_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+
+	return regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL2,
+				  MAX77620_WDTEN, MAX77620_WDTEN);
+}
+
+static int max77620_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct max77620_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+
+	return regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL2,
+				  MAX77620_WDTEN, 0);
+}
+
+static int max77620_wdt_ping(struct watchdog_device *wdt_dev)
+{
+	struct max77620_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+
+	return regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL3,
+				  MAX77620_WDTC_MASK, 0x1);
+}
+
+static int max77620_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				    unsigned int timeout)
+{
+	struct max77620_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+	unsigned int wdt_timeout;
+	u8 regval;
+	int ret;
+
+	switch (timeout) {
+	case 0 ... 2:
+		regval = MAX77620_TWD_2s;
+		wdt_timeout = 2;
+		break;
+
+	case 3 ... 16:
+		regval = MAX77620_TWD_16s;
+		wdt_timeout = 16;
+		break;
+
+	case 17 ... 64:
+		regval = MAX77620_TWD_64s;
+		wdt_timeout = 64;
+		break;
+
+	default:
+		regval = MAX77620_TWD_128s;
+		wdt_timeout = 128;
+		break;
+	}
+
+	ret = regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL3,
+				 MAX77620_WDTC_MASK, 0x1);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL2,
+				 MAX77620_TWD_MASK, regval);
+	if (ret < 0)
+		return ret;
+
+	wdt_dev->timeout = wdt_timeout;
+
+	return 0;
+}
+
+static const struct watchdog_info max77620_wdt_info = {
+	.identity = "max77620-watchdog",
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops max77620_wdt_ops = {
+	.start		= max77620_wdt_start,
+	.stop		= max77620_wdt_stop,
+	.ping		= max77620_wdt_ping,
+	.set_timeout	= max77620_wdt_set_timeout,
+};
+
+static int max77620_wdt_probe(struct platform_device *pdev)
+{
+	struct max77620_wdt *wdt;
+	struct watchdog_device *wdt_dev;
+	unsigned int regval;
+	int ret;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdt->dev = &pdev->dev;
+	wdt->rmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!wdt->rmap) {
+		dev_err(wdt->dev, "Failed to get parent regmap\n");
+		return -ENODEV;
+	}
+
+	wdt_dev = &wdt->wdt_dev;
+	wdt_dev->info = &max77620_wdt_info;
+	wdt_dev->ops = &max77620_wdt_ops;
+	wdt_dev->min_timeout = 2;
+	wdt_dev->max_timeout = 128;
+	wdt_dev->max_hw_heartbeat_ms = 128 * 1000;
+
+	platform_set_drvdata(pdev, wdt);
+
+	/* Enable WD_RST_WK - WDT expire results in a restart */
+	ret = regmap_update_bits(wdt->rmap, MAX77620_REG_ONOFFCNFG2,
+				 MAX77620_ONOFFCNFG2_WD_RST_WK,
+				 MAX77620_ONOFFCNFG2_WD_RST_WK);
+	if (ret < 0) {
+		dev_err(wdt->dev, "Failed to set WD_RST_WK: %d\n", ret);
+		return ret;
+	}
+
+	/* Set WDT clear in OFF and sleep mode */
+	ret = regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL2,
+				 MAX77620_WDTOFFC | MAX77620_WDTSLPC,
+				 MAX77620_WDTOFFC | MAX77620_WDTSLPC);
+	if (ret < 0) {
+		dev_err(wdt->dev, "Failed to set WDT OFF mode: %d\n", ret);
+		return ret;
+	}
+
+	/* Check if WDT running and if yes then set flags properly */
+	ret = regmap_read(wdt->rmap, MAX77620_REG_CNFGGLBL2, &regval);
+	if (ret < 0) {
+		dev_err(wdt->dev, "Failed to read WDT CFG register: %d\n", ret);
+		return ret;
+	}
+
+	switch (regval & MAX77620_TWD_MASK) {
+	case MAX77620_TWD_2s:
+		wdt_dev->timeout = 2;
+		break;
+	case MAX77620_TWD_16s:
+		wdt_dev->timeout = 16;
+		break;
+	case MAX77620_TWD_64s:
+		wdt_dev->timeout = 64;
+		break;
+	default:
+		wdt_dev->timeout = 128;
+		break;
+	}
+
+	if (regval & MAX77620_WDTEN)
+		set_bit(WDOG_HW_RUNNING, &wdt_dev->status);
+
+	watchdog_set_nowayout(wdt_dev, nowayout);
+	watchdog_set_drvdata(wdt_dev, wdt);
+
+	ret = watchdog_register_device(wdt_dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "watchdog registration failed: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int max77620_wdt_remove(struct platform_device *pdev)
+{
+	struct max77620_wdt *wdt = platform_get_drvdata(pdev);
+
+	max77620_wdt_stop(&wdt->wdt_dev);
+	watchdog_unregister_device(&wdt->wdt_dev);
+
+	return 0;
+}
+
+static const struct platform_device_id max77620_wdt_devtype[] = {
+	{ .name = "max77620-watchdog", },
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, max77620_wdt_devtype);
+
+static struct platform_driver max77620_wdt_driver = {
+	.driver	= {
+		.name	= "max77620-watchdog",
+	},
+	.probe	= max77620_wdt_probe,
+	.remove	= max77620_wdt_remove,
+	.id_table = max77620_wdt_devtype,
+};
+
+module_platform_driver(max77620_wdt_driver);
+
+MODULE_DESCRIPTION("Max77620 watchdog timer driver");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+	"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/watchdog/mei_wdt.c b/drivers/watchdog/mei_wdt.c
new file mode 100644
index 000000000..c862dd38b
--- /dev/null
+++ b/drivers/watchdog/mei_wdt.c
@@ -0,0 +1,684 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2015, Intel Corporation.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/debugfs.h>
+#include <linux/completion.h>
+#include <linux/watchdog.h>
+
+#include <linux/uuid.h>
+#include <linux/mei_cl_bus.h>
+
+/*
+ * iAMT Watchdog Device
+ */
+#define INTEL_AMT_WATCHDOG_ID "iamt_wdt"
+
+#define MEI_WDT_DEFAULT_TIMEOUT   120  /* seconds */
+#define MEI_WDT_MIN_TIMEOUT       120  /* seconds */
+#define MEI_WDT_MAX_TIMEOUT     65535  /* seconds */
+
+/* Commands */
+#define MEI_MANAGEMENT_CONTROL 0x02
+
+/* MEI Management Control version number */
+#define MEI_MC_VERSION_NUMBER  0x10
+
+/* Sub Commands */
+#define MEI_MC_START_WD_TIMER_REQ  0x13
+#define MEI_MC_START_WD_TIMER_RES  0x83
+#define   MEI_WDT_STATUS_SUCCESS 0
+#define   MEI_WDT_WDSTATE_NOT_REQUIRED 0x1
+#define MEI_MC_STOP_WD_TIMER_REQ   0x14
+
+/**
+ * enum mei_wdt_state - internal watchdog state
+ *
+ * @MEI_WDT_PROBE: wd in probing stage
+ * @MEI_WDT_IDLE: wd is idle and not opened
+ * @MEI_WDT_START: wd was opened, start was called
+ * @MEI_WDT_RUNNING: wd is expecting keep alive pings
+ * @MEI_WDT_STOPPING: wd is stopping and will move to IDLE
+ * @MEI_WDT_NOT_REQUIRED: wd device is not required
+ */
+enum mei_wdt_state {
+	MEI_WDT_PROBE,
+	MEI_WDT_IDLE,
+	MEI_WDT_START,
+	MEI_WDT_RUNNING,
+	MEI_WDT_STOPPING,
+	MEI_WDT_NOT_REQUIRED,
+};
+
+static const char *mei_wdt_state_str(enum mei_wdt_state state)
+{
+	switch (state) {
+	case MEI_WDT_PROBE:
+		return "PROBE";
+	case MEI_WDT_IDLE:
+		return "IDLE";
+	case MEI_WDT_START:
+		return "START";
+	case MEI_WDT_RUNNING:
+		return "RUNNING";
+	case MEI_WDT_STOPPING:
+		return "STOPPING";
+	case MEI_WDT_NOT_REQUIRED:
+		return "NOT_REQUIRED";
+	default:
+		return "unknown";
+	}
+}
+
+/**
+ * struct mei_wdt - mei watchdog driver
+ * @wdd: watchdog device
+ *
+ * @cldev: mei watchdog client device
+ * @state: watchdog internal state
+ * @resp_required: ping required response
+ * @response: ping response completion
+ * @unregister: unregister worker
+ * @reg_lock: watchdog device registration lock
+ * @timeout: watchdog current timeout
+ *
+ * @dbgfs_dir: debugfs dir entry
+ */
+struct mei_wdt {
+	struct watchdog_device wdd;
+
+	struct mei_cl_device *cldev;
+	enum mei_wdt_state state;
+	bool resp_required;
+	struct completion response;
+	struct work_struct unregister;
+	struct mutex reg_lock;
+	u16 timeout;
+
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+	struct dentry *dbgfs_dir;
+#endif /* CONFIG_DEBUG_FS */
+};
+
+/*
+ * struct mei_mc_hdr - Management Control Command Header
+ *
+ * @command: Management Control (0x2)
+ * @bytecount: Number of bytes in the message beyond this byte
+ * @subcommand: Management Control Subcommand
+ * @versionnumber: Management Control Version (0x10)
+ */
+struct mei_mc_hdr {
+	u8 command;
+	u8 bytecount;
+	u8 subcommand;
+	u8 versionnumber;
+};
+
+/**
+ * struct mei_wdt_start_request watchdog start/ping
+ *
+ * @hdr: Management Control Command Header
+ * @timeout: timeout value
+ * @reserved: reserved (legacy)
+ */
+struct mei_wdt_start_request {
+	struct mei_mc_hdr hdr;
+	u16 timeout;
+	u8 reserved[17];
+} __packed;
+
+/**
+ * struct mei_wdt_start_response watchdog start/ping response
+ *
+ * @hdr: Management Control Command Header
+ * @status: operation status
+ * @wdstate: watchdog status bit mask
+ */
+struct mei_wdt_start_response {
+	struct mei_mc_hdr hdr;
+	u8 status;
+	u8 wdstate;
+} __packed;
+
+/**
+ * struct mei_wdt_stop_request - watchdog stop
+ *
+ * @hdr: Management Control Command Header
+ */
+struct mei_wdt_stop_request {
+	struct mei_mc_hdr hdr;
+} __packed;
+
+/**
+ * mei_wdt_ping - send wd start/ping command
+ *
+ * @wdt: mei watchdog device
+ *
+ * Return: 0 on success,
+ *         negative errno code on failure
+ */
+static int mei_wdt_ping(struct mei_wdt *wdt)
+{
+	struct mei_wdt_start_request req;
+	const size_t req_len = sizeof(req);
+	int ret;
+
+	memset(&req, 0, req_len);
+	req.hdr.command = MEI_MANAGEMENT_CONTROL;
+	req.hdr.bytecount = req_len - offsetof(struct mei_mc_hdr, subcommand);
+	req.hdr.subcommand = MEI_MC_START_WD_TIMER_REQ;
+	req.hdr.versionnumber = MEI_MC_VERSION_NUMBER;
+	req.timeout = wdt->timeout;
+
+	ret = mei_cldev_send(wdt->cldev, (u8 *)&req, req_len);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/**
+ * mei_wdt_stop - send wd stop command
+ *
+ * @wdt: mei watchdog device
+ *
+ * Return: 0 on success,
+ *         negative errno code on failure
+ */
+static int mei_wdt_stop(struct mei_wdt *wdt)
+{
+	struct mei_wdt_stop_request req;
+	const size_t req_len = sizeof(req);
+	int ret;
+
+	memset(&req, 0, req_len);
+	req.hdr.command = MEI_MANAGEMENT_CONTROL;
+	req.hdr.bytecount = req_len - offsetof(struct mei_mc_hdr, subcommand);
+	req.hdr.subcommand = MEI_MC_STOP_WD_TIMER_REQ;
+	req.hdr.versionnumber = MEI_MC_VERSION_NUMBER;
+
+	ret = mei_cldev_send(wdt->cldev, (u8 *)&req, req_len);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/**
+ * mei_wdt_ops_start - wd start command from the watchdog core.
+ *
+ * @wdd: watchdog device
+ *
+ * Return: 0 on success or -ENODEV;
+ */
+static int mei_wdt_ops_start(struct watchdog_device *wdd)
+{
+	struct mei_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	wdt->state = MEI_WDT_START;
+	wdd->timeout = wdt->timeout;
+	return 0;
+}
+
+/**
+ * mei_wdt_ops_stop - wd stop command from the watchdog core.
+ *
+ * @wdd: watchdog device
+ *
+ * Return: 0 if success, negative errno code for failure
+ */
+static int mei_wdt_ops_stop(struct watchdog_device *wdd)
+{
+	struct mei_wdt *wdt = watchdog_get_drvdata(wdd);
+	int ret;
+
+	if (wdt->state != MEI_WDT_RUNNING)
+		return 0;
+
+	wdt->state = MEI_WDT_STOPPING;
+
+	ret = mei_wdt_stop(wdt);
+	if (ret)
+		return ret;
+
+	wdt->state = MEI_WDT_IDLE;
+
+	return 0;
+}
+
+/**
+ * mei_wdt_ops_ping - wd ping command from the watchdog core.
+ *
+ * @wdd: watchdog device
+ *
+ * Return: 0 if success, negative errno code on failure
+ */
+static int mei_wdt_ops_ping(struct watchdog_device *wdd)
+{
+	struct mei_wdt *wdt = watchdog_get_drvdata(wdd);
+	int ret;
+
+	if (wdt->state != MEI_WDT_START && wdt->state != MEI_WDT_RUNNING)
+		return 0;
+
+	if (wdt->resp_required)
+		init_completion(&wdt->response);
+
+	wdt->state = MEI_WDT_RUNNING;
+	ret = mei_wdt_ping(wdt);
+	if (ret)
+		return ret;
+
+	if (wdt->resp_required)
+		ret = wait_for_completion_killable(&wdt->response);
+
+	return ret;
+}
+
+/**
+ * mei_wdt_ops_set_timeout - wd set timeout command from the watchdog core.
+ *
+ * @wdd: watchdog device
+ * @timeout: timeout value to set
+ *
+ * Return: 0 if success, negative errno code for failure
+ */
+static int mei_wdt_ops_set_timeout(struct watchdog_device *wdd,
+				   unsigned int timeout)
+{
+
+	struct mei_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	/* valid value is already checked by the caller */
+	wdt->timeout = timeout;
+	wdd->timeout = timeout;
+
+	return 0;
+}
+
+static const struct watchdog_ops wd_ops = {
+	.owner       = THIS_MODULE,
+	.start       = mei_wdt_ops_start,
+	.stop        = mei_wdt_ops_stop,
+	.ping        = mei_wdt_ops_ping,
+	.set_timeout = mei_wdt_ops_set_timeout,
+};
+
+/* not const as the firmware_version field need to be retrieved */
+static struct watchdog_info wd_info = {
+	.identity = INTEL_AMT_WATCHDOG_ID,
+	.options  = WDIOF_KEEPALIVEPING |
+		    WDIOF_SETTIMEOUT |
+		    WDIOF_ALARMONLY,
+};
+
+/**
+ * __mei_wdt_is_registered - check if wdt is registered
+ *
+ * @wdt: mei watchdog device
+ *
+ * Return: true if the wdt is registered with the watchdog subsystem
+ * Locking: should be called under wdt->reg_lock
+ */
+static inline bool __mei_wdt_is_registered(struct mei_wdt *wdt)
+{
+	return !!watchdog_get_drvdata(&wdt->wdd);
+}
+
+/**
+ * mei_wdt_unregister - unregister from the watchdog subsystem
+ *
+ * @wdt: mei watchdog device
+ */
+static void mei_wdt_unregister(struct mei_wdt *wdt)
+{
+	mutex_lock(&wdt->reg_lock);
+
+	if (__mei_wdt_is_registered(wdt)) {
+		watchdog_unregister_device(&wdt->wdd);
+		watchdog_set_drvdata(&wdt->wdd, NULL);
+		memset(&wdt->wdd, 0, sizeof(wdt->wdd));
+	}
+
+	mutex_unlock(&wdt->reg_lock);
+}
+
+/**
+ * mei_wdt_register - register with the watchdog subsystem
+ *
+ * @wdt: mei watchdog device
+ *
+ * Return: 0 if success, negative errno code for failure
+ */
+static int mei_wdt_register(struct mei_wdt *wdt)
+{
+	struct device *dev;
+	int ret;
+
+	if (!wdt || !wdt->cldev)
+		return -EINVAL;
+
+	dev = &wdt->cldev->dev;
+
+	mutex_lock(&wdt->reg_lock);
+
+	if (__mei_wdt_is_registered(wdt)) {
+		ret = 0;
+		goto out;
+	}
+
+	wdt->wdd.info = &wd_info;
+	wdt->wdd.ops = &wd_ops;
+	wdt->wdd.parent = dev;
+	wdt->wdd.timeout = MEI_WDT_DEFAULT_TIMEOUT;
+	wdt->wdd.min_timeout = MEI_WDT_MIN_TIMEOUT;
+	wdt->wdd.max_timeout = MEI_WDT_MAX_TIMEOUT;
+
+	watchdog_set_drvdata(&wdt->wdd, wdt);
+	watchdog_stop_on_reboot(&wdt->wdd);
+	watchdog_stop_on_unregister(&wdt->wdd);
+
+	ret = watchdog_register_device(&wdt->wdd);
+	if (ret) {
+		dev_err(dev, "unable to register watchdog device = %d.\n", ret);
+		watchdog_set_drvdata(&wdt->wdd, NULL);
+	}
+
+	wdt->state = MEI_WDT_IDLE;
+
+out:
+	mutex_unlock(&wdt->reg_lock);
+	return ret;
+}
+
+static void mei_wdt_unregister_work(struct work_struct *work)
+{
+	struct mei_wdt *wdt = container_of(work, struct mei_wdt, unregister);
+
+	mei_wdt_unregister(wdt);
+}
+
+/**
+ * mei_wdt_rx - callback for data receive
+ *
+ * @cldev: bus device
+ */
+static void mei_wdt_rx(struct mei_cl_device *cldev)
+{
+	struct mei_wdt *wdt = mei_cldev_get_drvdata(cldev);
+	struct mei_wdt_start_response res;
+	const size_t res_len = sizeof(res);
+	int ret;
+
+	ret = mei_cldev_recv(wdt->cldev, (u8 *)&res, res_len);
+	if (ret < 0) {
+		dev_err(&cldev->dev, "failure in recv %d\n", ret);
+		return;
+	}
+
+	/* Empty response can be sent on stop */
+	if (ret == 0)
+		return;
+
+	if (ret < sizeof(struct mei_mc_hdr)) {
+		dev_err(&cldev->dev, "recv small data %d\n", ret);
+		return;
+	}
+
+	if (res.hdr.command != MEI_MANAGEMENT_CONTROL ||
+	    res.hdr.versionnumber != MEI_MC_VERSION_NUMBER) {
+		dev_err(&cldev->dev, "wrong command received\n");
+		return;
+	}
+
+	if (res.hdr.subcommand != MEI_MC_START_WD_TIMER_RES) {
+		dev_warn(&cldev->dev, "unsupported command %d :%s[%d]\n",
+			 res.hdr.subcommand,
+			 mei_wdt_state_str(wdt->state),
+			 wdt->state);
+		return;
+	}
+
+	/* Run the unregistration in a worker as this can be
+	 * run only after ping completion, otherwise the flow will
+	 * deadlock on watchdog core mutex.
+	 */
+	if (wdt->state == MEI_WDT_RUNNING) {
+		if (res.wdstate & MEI_WDT_WDSTATE_NOT_REQUIRED) {
+			wdt->state = MEI_WDT_NOT_REQUIRED;
+			schedule_work(&wdt->unregister);
+		}
+		goto out;
+	}
+
+	if (wdt->state == MEI_WDT_PROBE) {
+		if (res.wdstate & MEI_WDT_WDSTATE_NOT_REQUIRED) {
+			wdt->state = MEI_WDT_NOT_REQUIRED;
+		} else {
+			/* stop the watchdog and register watchdog device */
+			mei_wdt_stop(wdt);
+			mei_wdt_register(wdt);
+		}
+		return;
+	}
+
+	dev_warn(&cldev->dev, "not in correct state %s[%d]\n",
+			 mei_wdt_state_str(wdt->state), wdt->state);
+
+out:
+	if (!completion_done(&wdt->response))
+		complete(&wdt->response);
+}
+
+/*
+ * mei_wdt_notif - callback for event notification
+ *
+ * @cldev: bus device
+ */
+static void mei_wdt_notif(struct mei_cl_device *cldev)
+{
+	struct mei_wdt *wdt = mei_cldev_get_drvdata(cldev);
+
+	if (wdt->state != MEI_WDT_NOT_REQUIRED)
+		return;
+
+	mei_wdt_register(wdt);
+}
+
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+
+static ssize_t mei_dbgfs_read_activation(struct file *file, char __user *ubuf,
+					size_t cnt, loff_t *ppos)
+{
+	struct mei_wdt *wdt = file->private_data;
+	const size_t bufsz = 32;
+	char buf[32];
+	ssize_t pos;
+
+	mutex_lock(&wdt->reg_lock);
+	pos = scnprintf(buf, bufsz, "%s\n",
+		__mei_wdt_is_registered(wdt) ? "activated" : "deactivated");
+	mutex_unlock(&wdt->reg_lock);
+
+	return simple_read_from_buffer(ubuf, cnt, ppos, buf, pos);
+}
+
+static const struct file_operations dbgfs_fops_activation = {
+	.open    = simple_open,
+	.read    = mei_dbgfs_read_activation,
+	.llseek  = generic_file_llseek,
+};
+
+static ssize_t mei_dbgfs_read_state(struct file *file, char __user *ubuf,
+				    size_t cnt, loff_t *ppos)
+{
+	struct mei_wdt *wdt = file->private_data;
+	char buf[32];
+	ssize_t pos;
+
+	pos = scnprintf(buf, sizeof(buf), "state: %s\n",
+			mei_wdt_state_str(wdt->state));
+
+	return simple_read_from_buffer(ubuf, cnt, ppos, buf, pos);
+}
+
+static const struct file_operations dbgfs_fops_state = {
+	.open = simple_open,
+	.read = mei_dbgfs_read_state,
+	.llseek = generic_file_llseek,
+};
+
+static void dbgfs_unregister(struct mei_wdt *wdt)
+{
+	debugfs_remove_recursive(wdt->dbgfs_dir);
+	wdt->dbgfs_dir = NULL;
+}
+
+static int dbgfs_register(struct mei_wdt *wdt)
+{
+	struct dentry *dir, *f;
+
+	dir = debugfs_create_dir(KBUILD_MODNAME, NULL);
+	if (!dir)
+		return -ENOMEM;
+
+	wdt->dbgfs_dir = dir;
+	f = debugfs_create_file("state", S_IRUSR, dir, wdt, &dbgfs_fops_state);
+	if (!f)
+		goto err;
+
+	f = debugfs_create_file("activation",  S_IRUSR,
+				dir, wdt, &dbgfs_fops_activation);
+	if (!f)
+		goto err;
+
+	return 0;
+err:
+	dbgfs_unregister(wdt);
+	return -ENODEV;
+}
+
+#else
+
+static inline void dbgfs_unregister(struct mei_wdt *wdt) {}
+
+static inline int dbgfs_register(struct mei_wdt *wdt)
+{
+	return 0;
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static int mei_wdt_probe(struct mei_cl_device *cldev,
+			 const struct mei_cl_device_id *id)
+{
+	struct mei_wdt *wdt;
+	int ret;
+
+	wdt = kzalloc(sizeof(struct mei_wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdt->timeout = MEI_WDT_DEFAULT_TIMEOUT;
+	wdt->state = MEI_WDT_PROBE;
+	wdt->cldev = cldev;
+	wdt->resp_required = mei_cldev_ver(cldev) > 0x1;
+	mutex_init(&wdt->reg_lock);
+	init_completion(&wdt->response);
+	INIT_WORK(&wdt->unregister, mei_wdt_unregister_work);
+
+	mei_cldev_set_drvdata(cldev, wdt);
+
+	ret = mei_cldev_enable(cldev);
+	if (ret < 0) {
+		dev_err(&cldev->dev, "Could not enable cl device\n");
+		goto err_out;
+	}
+
+	ret = mei_cldev_register_rx_cb(wdt->cldev, mei_wdt_rx);
+	if (ret) {
+		dev_err(&cldev->dev, "Could not reg rx event ret=%d\n", ret);
+		goto err_disable;
+	}
+
+	ret = mei_cldev_register_notif_cb(wdt->cldev, mei_wdt_notif);
+	/* on legacy devices notification is not supported
+	 */
+	if (ret && ret != -EOPNOTSUPP) {
+		dev_err(&cldev->dev, "Could not reg notif event ret=%d\n", ret);
+		goto err_disable;
+	}
+
+	wd_info.firmware_version = mei_cldev_ver(cldev);
+
+	if (wdt->resp_required)
+		ret = mei_wdt_ping(wdt);
+	else
+		ret = mei_wdt_register(wdt);
+
+	if (ret)
+		goto err_disable;
+
+	if (dbgfs_register(wdt))
+		dev_warn(&cldev->dev, "cannot register debugfs\n");
+
+	return 0;
+
+err_disable:
+	mei_cldev_disable(cldev);
+
+err_out:
+	kfree(wdt);
+
+	return ret;
+}
+
+static int mei_wdt_remove(struct mei_cl_device *cldev)
+{
+	struct mei_wdt *wdt = mei_cldev_get_drvdata(cldev);
+
+	/* Free the caller in case of fw initiated or unexpected reset */
+	if (!completion_done(&wdt->response))
+		complete(&wdt->response);
+
+	cancel_work_sync(&wdt->unregister);
+
+	mei_wdt_unregister(wdt);
+
+	mei_cldev_disable(cldev);
+
+	dbgfs_unregister(wdt);
+
+	kfree(wdt);
+
+	return 0;
+}
+
+#define MEI_UUID_WD UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, \
+			    0x89, 0x9D, 0xA9, 0x15, 0x14, 0xCB, 0x32, 0xAB)
+
+static const struct mei_cl_device_id mei_wdt_tbl[] = {
+	{ .uuid = MEI_UUID_WD, .version = MEI_CL_VERSION_ANY },
+	/* required last entry */
+	{ }
+};
+MODULE_DEVICE_TABLE(mei, mei_wdt_tbl);
+
+static struct mei_cl_driver mei_wdt_driver = {
+	.id_table = mei_wdt_tbl,
+	.name = KBUILD_MODNAME,
+
+	.probe = mei_wdt_probe,
+	.remove = mei_wdt_remove,
+};
+
+module_mei_cl_driver(mei_wdt_driver);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Device driver for Intel MEI iAMT watchdog");
diff --git a/drivers/watchdog/mena21_wdt.c b/drivers/watchdog/mena21_wdt.c
new file mode 100644
index 000000000..0be7f50e8
--- /dev/null
+++ b/drivers/watchdog/mena21_wdt.c
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Watchdog driver for the A21 VME CPU Boards
+ *
+ * Copyright (C) 2013 MEN Mikro Elektronik Nuernberg GmbH
+ *
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/uaccess.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+
+#define NUM_GPIOS 6
+
+enum a21_wdt_gpios {
+	GPIO_WD_ENAB,
+	GPIO_WD_FAST,
+	GPIO_WD_TRIG,
+	GPIO_WD_RST0,
+	GPIO_WD_RST1,
+	GPIO_WD_RST2,
+};
+
+struct a21_wdt_drv {
+	struct watchdog_device wdt;
+	unsigned gpios[NUM_GPIOS];
+};
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+			    __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static unsigned int a21_wdt_get_bootstatus(struct a21_wdt_drv *drv)
+{
+	int reset = 0;
+
+	reset |= gpio_get_value(drv->gpios[GPIO_WD_RST0]) ? (1 << 0) : 0;
+	reset |= gpio_get_value(drv->gpios[GPIO_WD_RST1]) ? (1 << 1) : 0;
+	reset |= gpio_get_value(drv->gpios[GPIO_WD_RST2]) ? (1 << 2) : 0;
+
+	return reset;
+}
+
+static int a21_wdt_start(struct watchdog_device *wdt)
+{
+	struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt);
+
+	gpio_set_value(drv->gpios[GPIO_WD_ENAB], 1);
+
+	return 0;
+}
+
+static int a21_wdt_stop(struct watchdog_device *wdt)
+{
+	struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt);
+
+	gpio_set_value(drv->gpios[GPIO_WD_ENAB], 0);
+
+	return 0;
+}
+
+static int a21_wdt_ping(struct watchdog_device *wdt)
+{
+	struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt);
+
+	gpio_set_value(drv->gpios[GPIO_WD_TRIG], 0);
+	ndelay(10);
+	gpio_set_value(drv->gpios[GPIO_WD_TRIG], 1);
+
+	return 0;
+}
+
+static int a21_wdt_set_timeout(struct watchdog_device *wdt,
+			       unsigned int timeout)
+{
+	struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt);
+
+	if (timeout != 1 && timeout != 30) {
+		dev_err(wdt->parent, "Only 1 and 30 allowed as timeout\n");
+		return -EINVAL;
+	}
+
+	if (timeout == 30 && wdt->timeout == 1) {
+		dev_err(wdt->parent,
+			"Transition from fast to slow mode not allowed\n");
+		return -EINVAL;
+	}
+
+	if (timeout == 1)
+		gpio_set_value(drv->gpios[GPIO_WD_FAST], 1);
+	else
+		gpio_set_value(drv->gpios[GPIO_WD_FAST], 0);
+
+	wdt->timeout = timeout;
+
+	return 0;
+}
+
+static const struct watchdog_info a21_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "MEN A21 Watchdog",
+};
+
+static const struct watchdog_ops a21_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = a21_wdt_start,
+	.stop = a21_wdt_stop,
+	.ping = a21_wdt_ping,
+	.set_timeout = a21_wdt_set_timeout,
+};
+
+static struct watchdog_device a21_wdt = {
+	.info = &a21_wdt_info,
+	.ops = &a21_wdt_ops,
+	.min_timeout = 1,
+	.max_timeout = 30,
+};
+
+static int a21_wdt_probe(struct platform_device *pdev)
+{
+	struct device_node *node;
+	struct a21_wdt_drv *drv;
+	unsigned int reset = 0;
+	int num_gpios;
+	int ret;
+	int i;
+
+	drv = devm_kzalloc(&pdev->dev, sizeof(struct a21_wdt_drv), GFP_KERNEL);
+	if (!drv)
+		return -ENOMEM;
+
+	/* Fill GPIO pin array */
+	node = pdev->dev.of_node;
+
+	num_gpios = of_gpio_count(node);
+	if (num_gpios != NUM_GPIOS) {
+		dev_err(&pdev->dev, "gpios DT property wrong, got %d want %d",
+			num_gpios, NUM_GPIOS);
+		return -ENODEV;
+	}
+
+	for (i = 0; i < num_gpios; i++) {
+		int val;
+
+		val = of_get_gpio(node, i);
+		if (val < 0)
+			return val;
+
+		drv->gpios[i] = val;
+	}
+
+	/* Request the used GPIOs */
+	for (i = 0; i < num_gpios; i++) {
+		ret = devm_gpio_request(&pdev->dev, drv->gpios[i],
+					"MEN A21 Watchdog");
+		if (ret)
+			return ret;
+
+		if (i < GPIO_WD_RST0)
+			ret = gpio_direction_output(drv->gpios[i],
+						gpio_get_value(drv->gpios[i]));
+		else		/* GPIO_WD_RST[0..2] are inputs */
+			ret = gpio_direction_input(drv->gpios[i]);
+		if (ret)
+			return ret;
+	}
+
+	watchdog_init_timeout(&a21_wdt, 30, &pdev->dev);
+	watchdog_set_nowayout(&a21_wdt, nowayout);
+	watchdog_set_drvdata(&a21_wdt, drv);
+	a21_wdt.parent = &pdev->dev;
+
+	reset = a21_wdt_get_bootstatus(drv);
+	if (reset == 2)
+		a21_wdt.bootstatus |= WDIOF_EXTERN1;
+	else if (reset == 4)
+		a21_wdt.bootstatus |= WDIOF_CARDRESET;
+	else if (reset == 5)
+		a21_wdt.bootstatus |= WDIOF_POWERUNDER;
+	else if (reset == 7)
+		a21_wdt.bootstatus |= WDIOF_EXTERN2;
+
+	drv->wdt = a21_wdt;
+	dev_set_drvdata(&pdev->dev, drv);
+
+	ret = devm_watchdog_register_device(&pdev->dev, &a21_wdt);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot register watchdog device\n");
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "MEN A21 watchdog timer driver enabled\n");
+
+	return 0;
+}
+
+static void a21_wdt_shutdown(struct platform_device *pdev)
+{
+	struct a21_wdt_drv *drv = dev_get_drvdata(&pdev->dev);
+
+	gpio_set_value(drv->gpios[GPIO_WD_ENAB], 0);
+}
+
+static const struct of_device_id a21_wdt_ids[] = {
+	{ .compatible = "men,a021-wdt" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, a21_wdt_ids);
+
+static struct platform_driver a21_wdt_driver = {
+	.probe = a21_wdt_probe,
+	.shutdown = a21_wdt_shutdown,
+	.driver = {
+		.name = "a21-watchdog",
+		.of_match_table = a21_wdt_ids,
+	},
+};
+
+module_platform_driver(a21_wdt_driver);
+
+MODULE_AUTHOR("MEN Mikro Elektronik");
+MODULE_DESCRIPTION("MEN A21 Watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:a21-watchdog");
diff --git a/drivers/watchdog/menf21bmc_wdt.c b/drivers/watchdog/menf21bmc_wdt.c
new file mode 100644
index 000000000..3aefddebb
--- /dev/null
+++ b/drivers/watchdog/menf21bmc_wdt.c
@@ -0,0 +1,203 @@
+/*
+ *  MEN 14F021P00 Board Management Controller (BMC) Watchdog Driver.
+ *
+ *  Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+
+#define DEVNAME "menf21bmc_wdt"
+
+#define BMC_CMD_WD_ON		0x11
+#define BMC_CMD_WD_OFF		0x12
+#define BMC_CMD_WD_TRIG		0x13
+#define BMC_CMD_WD_TIME		0x14
+#define BMC_CMD_WD_STATE	0x17
+#define BMC_WD_OFF_VAL		0x69
+#define BMC_CMD_RST_RSN		0x92
+
+#define BMC_WD_TIMEOUT_MIN	1	/* in sec */
+#define BMC_WD_TIMEOUT_MAX	6553	/* in sec */
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct menf21bmc_wdt {
+	struct watchdog_device wdt;
+	struct i2c_client *i2c_client;
+};
+
+static int menf21bmc_wdt_set_bootstatus(struct menf21bmc_wdt *data)
+{
+	int rst_rsn;
+
+	rst_rsn = i2c_smbus_read_byte_data(data->i2c_client, BMC_CMD_RST_RSN);
+	if (rst_rsn < 0)
+		return rst_rsn;
+
+	if (rst_rsn == 0x02)
+		data->wdt.bootstatus |= WDIOF_CARDRESET;
+	else if (rst_rsn == 0x05)
+		data->wdt.bootstatus |= WDIOF_EXTERN1;
+	else if (rst_rsn == 0x06)
+		data->wdt.bootstatus |= WDIOF_EXTERN2;
+	else if (rst_rsn == 0x0A)
+		data->wdt.bootstatus |= WDIOF_POWERUNDER;
+
+	return 0;
+}
+
+static int menf21bmc_wdt_start(struct watchdog_device *wdt)
+{
+	struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt);
+
+	return i2c_smbus_write_byte(drv_data->i2c_client, BMC_CMD_WD_ON);
+}
+
+static int menf21bmc_wdt_stop(struct watchdog_device *wdt)
+{
+	struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt);
+
+	return i2c_smbus_write_byte_data(drv_data->i2c_client,
+					 BMC_CMD_WD_OFF, BMC_WD_OFF_VAL);
+}
+
+static int
+menf21bmc_wdt_settimeout(struct watchdog_device *wdt, unsigned int timeout)
+{
+	int ret;
+	struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt);
+
+	/*
+	 *  BMC Watchdog does have a resolution of 100ms.
+	 *  Watchdog API defines the timeout in seconds, so we have to
+	 *  multiply the value.
+	 */
+	ret = i2c_smbus_write_word_data(drv_data->i2c_client,
+					BMC_CMD_WD_TIME, timeout * 10);
+	if (ret < 0)
+		return ret;
+
+	wdt->timeout = timeout;
+
+	return 0;
+}
+
+static int menf21bmc_wdt_ping(struct watchdog_device *wdt)
+{
+	struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt);
+
+	return i2c_smbus_write_byte(drv_data->i2c_client, BMC_CMD_WD_TRIG);
+}
+
+static const struct watchdog_info menf21bmc_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.identity = DEVNAME,
+};
+
+static const struct watchdog_ops menf21bmc_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= menf21bmc_wdt_start,
+	.stop		= menf21bmc_wdt_stop,
+	.ping		= menf21bmc_wdt_ping,
+	.set_timeout	= menf21bmc_wdt_settimeout,
+};
+
+static int menf21bmc_wdt_probe(struct platform_device *pdev)
+{
+	int ret, bmc_timeout;
+	struct menf21bmc_wdt *drv_data;
+	struct i2c_client *i2c_client = to_i2c_client(pdev->dev.parent);
+
+	drv_data = devm_kzalloc(&pdev->dev,
+				sizeof(struct menf21bmc_wdt), GFP_KERNEL);
+	if (!drv_data)
+		return -ENOMEM;
+
+	drv_data->wdt.ops = &menf21bmc_wdt_ops;
+	drv_data->wdt.info = &menf21bmc_wdt_info;
+	drv_data->wdt.min_timeout = BMC_WD_TIMEOUT_MIN;
+	drv_data->wdt.max_timeout = BMC_WD_TIMEOUT_MAX;
+	drv_data->wdt.parent = &pdev->dev;
+	drv_data->i2c_client = i2c_client;
+
+	/*
+	 * Get the current wdt timeout value from the BMC because
+	 * the BMC will save the value set before if the system restarts.
+	 */
+	bmc_timeout = i2c_smbus_read_word_data(drv_data->i2c_client,
+					       BMC_CMD_WD_TIME);
+	if (bmc_timeout < 0) {
+		dev_err(&pdev->dev, "failed to get current WDT timeout\n");
+		return bmc_timeout;
+	}
+
+	watchdog_init_timeout(&drv_data->wdt, bmc_timeout / 10, &pdev->dev);
+	watchdog_set_nowayout(&drv_data->wdt, nowayout);
+	watchdog_set_drvdata(&drv_data->wdt, drv_data);
+	platform_set_drvdata(pdev, drv_data);
+
+	ret = menf21bmc_wdt_set_bootstatus(drv_data);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to set Watchdog bootstatus\n");
+		return ret;
+	}
+
+	ret = watchdog_register_device(&drv_data->wdt);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register Watchdog device\n");
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "MEN 14F021P00 BMC Watchdog device enabled\n");
+
+	return 0;
+}
+
+static int menf21bmc_wdt_remove(struct platform_device *pdev)
+{
+	struct menf21bmc_wdt *drv_data = platform_get_drvdata(pdev);
+
+	dev_warn(&pdev->dev,
+		 "Unregister MEN 14F021P00 BMC Watchdog device, board may reset\n");
+
+	watchdog_unregister_device(&drv_data->wdt);
+
+	return 0;
+}
+
+static void menf21bmc_wdt_shutdown(struct platform_device *pdev)
+{
+	struct menf21bmc_wdt *drv_data = platform_get_drvdata(pdev);
+
+	i2c_smbus_write_word_data(drv_data->i2c_client,
+				  BMC_CMD_WD_OFF, BMC_WD_OFF_VAL);
+}
+
+static struct  platform_driver menf21bmc_wdt = {
+	.driver		= {
+		.name	= DEVNAME,
+	},
+	.probe		= menf21bmc_wdt_probe,
+	.remove		= menf21bmc_wdt_remove,
+	.shutdown	= menf21bmc_wdt_shutdown,
+};
+
+module_platform_driver(menf21bmc_wdt);
+
+MODULE_DESCRIPTION("MEN 14F021P00 BMC Watchdog driver");
+MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:menf21bmc_wdt");
diff --git a/drivers/watchdog/menz69_wdt.c b/drivers/watchdog/menz69_wdt.c
new file mode 100644
index 000000000..ed18238c5
--- /dev/null
+++ b/drivers/watchdog/menz69_wdt.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Watchdog driver for the MEN z069 IP-Core
+ *
+ * Copyright (C) 2018 Johannes Thumshirn <jth@kernel.org>
+ */
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mcb.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+
+struct men_z069_drv {
+	struct watchdog_device wdt;
+	void __iomem *base;
+	struct resource *mem;
+};
+
+#define MEN_Z069_WTR			0x10
+#define MEN_Z069_WTR_WDEN		BIT(15)
+#define MEN_Z069_WTR_WDET_MASK		0x7fff
+#define MEN_Z069_WVR			0x14
+
+#define MEN_Z069_TIMER_FREQ		500 /* 500 Hz */
+#define MEN_Z069_WDT_COUNTER_MIN	1
+#define MEN_Z069_WDT_COUNTER_MAX	0x7fff
+#define MEN_Z069_DEFAULT_TIMEOUT	30
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+			    __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int men_z069_wdt_start(struct watchdog_device *wdt)
+{
+	struct men_z069_drv *drv = watchdog_get_drvdata(wdt);
+	u16 val;
+
+	val = readw(drv->base + MEN_Z069_WTR);
+	val |= MEN_Z069_WTR_WDEN;
+	writew(val, drv->base + MEN_Z069_WTR);
+
+	return 0;
+}
+
+static int men_z069_wdt_stop(struct watchdog_device *wdt)
+{
+	struct men_z069_drv *drv = watchdog_get_drvdata(wdt);
+	u16 val;
+
+	val = readw(drv->base + MEN_Z069_WTR);
+	val &= ~MEN_Z069_WTR_WDEN;
+	writew(val, drv->base + MEN_Z069_WTR);
+
+	return 0;
+}
+
+static int men_z069_wdt_ping(struct watchdog_device *wdt)
+{
+	struct men_z069_drv *drv = watchdog_get_drvdata(wdt);
+	u16 val;
+
+	/* The watchdog trigger value toggles between 0x5555 and 0xaaaa */
+	val = readw(drv->base + MEN_Z069_WVR);
+	val ^= 0xffff;
+	writew(val, drv->base + MEN_Z069_WVR);
+
+	return 0;
+}
+
+static int men_z069_wdt_set_timeout(struct watchdog_device *wdt,
+				    unsigned int timeout)
+{
+	struct men_z069_drv *drv = watchdog_get_drvdata(wdt);
+	u16 reg, val, ena;
+
+	wdt->timeout = timeout;
+	val = timeout * MEN_Z069_TIMER_FREQ;
+
+	reg = readw(drv->base + MEN_Z069_WVR);
+	ena = reg & MEN_Z069_WTR_WDEN;
+	reg = ena | val;
+	writew(reg, drv->base + MEN_Z069_WTR);
+
+	return 0;
+}
+
+static const struct watchdog_info men_z069_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "MEN z069 Watchdog",
+};
+
+static const struct watchdog_ops men_z069_ops = {
+	.owner = THIS_MODULE,
+	.start = men_z069_wdt_start,
+	.stop = men_z069_wdt_stop,
+	.ping = men_z069_wdt_ping,
+	.set_timeout = men_z069_wdt_set_timeout,
+};
+
+static struct watchdog_device men_z069_wdt = {
+	.info = &men_z069_info,
+	.ops = &men_z069_ops,
+	.timeout = MEN_Z069_DEFAULT_TIMEOUT,
+	.min_timeout = 1,
+	.max_timeout = MEN_Z069_WDT_COUNTER_MAX / MEN_Z069_TIMER_FREQ,
+};
+
+static int men_z069_probe(struct mcb_device *dev,
+			  const struct mcb_device_id *id)
+{
+	struct men_z069_drv *drv;
+	struct resource *mem;
+
+	drv = devm_kzalloc(&dev->dev, sizeof(struct men_z069_drv), GFP_KERNEL);
+	if (!drv)
+		return -ENOMEM;
+
+	mem = mcb_request_mem(dev, "z069-wdt");
+	if (IS_ERR(mem))
+		return PTR_ERR(mem);
+
+	drv->base = devm_ioremap(&dev->dev, mem->start, resource_size(mem));
+	if (drv->base == NULL)
+		goto release_mem;
+
+	drv->mem = mem;
+
+	drv->wdt = men_z069_wdt;
+	watchdog_init_timeout(&drv->wdt, 0, &dev->dev);
+	watchdog_set_nowayout(&drv->wdt, nowayout);
+	watchdog_set_drvdata(&drv->wdt, drv);
+	drv->wdt.parent = &dev->dev;
+	mcb_set_drvdata(dev, drv);
+
+	return watchdog_register_device(&men_z069_wdt);
+
+release_mem:
+	mcb_release_mem(mem);
+	return -ENOMEM;
+}
+
+static void men_z069_remove(struct mcb_device *dev)
+{
+	struct men_z069_drv *drv = mcb_get_drvdata(dev);
+
+	watchdog_unregister_device(&drv->wdt);
+	mcb_release_mem(drv->mem);
+}
+
+static const struct mcb_device_id men_z069_ids[] = {
+	{ .device = 0x45 },
+	{ }
+};
+MODULE_DEVICE_TABLE(mcb, men_z069_ids);
+
+static struct mcb_driver men_z069_driver = {
+	.driver = {
+		.name = "z069-wdt",
+		.owner = THIS_MODULE,
+	},
+	.probe = men_z069_probe,
+	.remove = men_z069_remove,
+	.id_table = men_z069_ids,
+};
+module_mcb_driver(men_z069_driver);
+
+MODULE_AUTHOR("Johannes Thumshirn <jth@kernel.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("mcb:16z069");
diff --git a/drivers/watchdog/meson_gxbb_wdt.c b/drivers/watchdog/meson_gxbb_wdt.c
new file mode 100644
index 000000000..0a6672789
--- /dev/null
+++ b/drivers/watchdog/meson_gxbb_wdt.c
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ */
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+#define DEFAULT_TIMEOUT	30	/* seconds */
+
+#define GXBB_WDT_CTRL_REG			0x0
+#define GXBB_WDT_TCNT_REG			0x8
+#define GXBB_WDT_RSET_REG			0xc
+
+#define GXBB_WDT_CTRL_CLKDIV_EN			BIT(25)
+#define GXBB_WDT_CTRL_CLK_EN			BIT(24)
+#define GXBB_WDT_CTRL_EE_RESET			BIT(21)
+#define GXBB_WDT_CTRL_EN			BIT(18)
+#define GXBB_WDT_CTRL_DIV_MASK			(BIT(18) - 1)
+
+#define GXBB_WDT_TCNT_SETUP_MASK		(BIT(16) - 1)
+#define GXBB_WDT_TCNT_CNT_SHIFT			16
+
+struct meson_gxbb_wdt {
+	void __iomem *reg_base;
+	struct watchdog_device wdt_dev;
+	struct clk *clk;
+};
+
+static int meson_gxbb_wdt_start(struct watchdog_device *wdt_dev)
+{
+	struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev);
+
+	writel(readl(data->reg_base + GXBB_WDT_CTRL_REG) | GXBB_WDT_CTRL_EN,
+	       data->reg_base + GXBB_WDT_CTRL_REG);
+
+	return 0;
+}
+
+static int meson_gxbb_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev);
+
+	writel(readl(data->reg_base + GXBB_WDT_CTRL_REG) & ~GXBB_WDT_CTRL_EN,
+	       data->reg_base + GXBB_WDT_CTRL_REG);
+
+	return 0;
+}
+
+static int meson_gxbb_wdt_ping(struct watchdog_device *wdt_dev)
+{
+	struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev);
+
+	writel(0, data->reg_base + GXBB_WDT_RSET_REG);
+
+	return 0;
+}
+
+static int meson_gxbb_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				      unsigned int timeout)
+{
+	struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev);
+	unsigned long tcnt = timeout * 1000;
+
+	if (tcnt > GXBB_WDT_TCNT_SETUP_MASK)
+		tcnt = GXBB_WDT_TCNT_SETUP_MASK;
+
+	wdt_dev->timeout = timeout;
+
+	meson_gxbb_wdt_ping(wdt_dev);
+
+	writel(tcnt, data->reg_base + GXBB_WDT_TCNT_REG);
+
+	return 0;
+}
+
+static unsigned int meson_gxbb_wdt_get_timeleft(struct watchdog_device *wdt_dev)
+{
+	struct meson_gxbb_wdt *data = watchdog_get_drvdata(wdt_dev);
+	unsigned long reg;
+
+	reg = readl(data->reg_base + GXBB_WDT_TCNT_REG);
+
+	return ((reg & GXBB_WDT_TCNT_SETUP_MASK) -
+		(reg >> GXBB_WDT_TCNT_CNT_SHIFT)) / 1000;
+}
+
+static const struct watchdog_ops meson_gxbb_wdt_ops = {
+	.start = meson_gxbb_wdt_start,
+	.stop = meson_gxbb_wdt_stop,
+	.ping = meson_gxbb_wdt_ping,
+	.set_timeout = meson_gxbb_wdt_set_timeout,
+	.get_timeleft = meson_gxbb_wdt_get_timeleft,
+};
+
+static const struct watchdog_info meson_gxbb_wdt_info = {
+	.identity = "Meson GXBB Watchdog",
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+};
+
+static int __maybe_unused meson_gxbb_wdt_resume(struct device *dev)
+{
+	struct meson_gxbb_wdt *data = dev_get_drvdata(dev);
+
+	if (watchdog_active(&data->wdt_dev))
+		meson_gxbb_wdt_start(&data->wdt_dev);
+
+	return 0;
+}
+
+static int __maybe_unused meson_gxbb_wdt_suspend(struct device *dev)
+{
+	struct meson_gxbb_wdt *data = dev_get_drvdata(dev);
+
+	if (watchdog_active(&data->wdt_dev))
+		meson_gxbb_wdt_stop(&data->wdt_dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops meson_gxbb_wdt_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(meson_gxbb_wdt_suspend, meson_gxbb_wdt_resume)
+};
+
+static const struct of_device_id meson_gxbb_wdt_dt_ids[] = {
+	 { .compatible = "amlogic,meson-gxbb-wdt", },
+	 { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, meson_gxbb_wdt_dt_ids);
+
+static int meson_gxbb_wdt_probe(struct platform_device *pdev)
+{
+	struct meson_gxbb_wdt *data;
+	struct resource *res;
+	int ret;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->reg_base))
+		return PTR_ERR(data->reg_base);
+
+	data->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(data->clk))
+		return PTR_ERR(data->clk);
+
+	ret = clk_prepare_enable(data->clk);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, data);
+
+	data->wdt_dev.parent = &pdev->dev;
+	data->wdt_dev.info = &meson_gxbb_wdt_info;
+	data->wdt_dev.ops = &meson_gxbb_wdt_ops;
+	data->wdt_dev.max_hw_heartbeat_ms = GXBB_WDT_TCNT_SETUP_MASK;
+	data->wdt_dev.min_timeout = 1;
+	data->wdt_dev.timeout = DEFAULT_TIMEOUT;
+	watchdog_set_drvdata(&data->wdt_dev, data);
+
+	/* Setup with 1ms timebase */
+	writel(((clk_get_rate(data->clk) / 1000) & GXBB_WDT_CTRL_DIV_MASK) |
+		GXBB_WDT_CTRL_EE_RESET |
+		GXBB_WDT_CTRL_CLK_EN |
+		GXBB_WDT_CTRL_CLKDIV_EN,
+		data->reg_base + GXBB_WDT_CTRL_REG);
+
+	meson_gxbb_wdt_set_timeout(&data->wdt_dev, data->wdt_dev.timeout);
+
+	ret = watchdog_register_device(&data->wdt_dev);
+	if (ret) {
+		clk_disable_unprepare(data->clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int meson_gxbb_wdt_remove(struct platform_device *pdev)
+{
+	struct meson_gxbb_wdt *data = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&data->wdt_dev);
+
+	clk_disable_unprepare(data->clk);
+
+	return 0;
+}
+
+static void meson_gxbb_wdt_shutdown(struct platform_device *pdev)
+{
+	struct meson_gxbb_wdt *data = platform_get_drvdata(pdev);
+
+	meson_gxbb_wdt_stop(&data->wdt_dev);
+}
+
+static struct platform_driver meson_gxbb_wdt_driver = {
+	.probe	= meson_gxbb_wdt_probe,
+	.remove	= meson_gxbb_wdt_remove,
+	.shutdown = meson_gxbb_wdt_shutdown,
+	.driver = {
+		.name = "meson-gxbb-wdt",
+		.pm = &meson_gxbb_wdt_pm_ops,
+		.of_match_table	= meson_gxbb_wdt_dt_ids,
+	},
+};
+
+module_platform_driver(meson_gxbb_wdt_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Amlogic Meson GXBB Watchdog timer driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/watchdog/meson_wdt.c b/drivers/watchdog/meson_wdt.c
new file mode 100644
index 000000000..cd0275a6c
--- /dev/null
+++ b/drivers/watchdog/meson_wdt.c
@@ -0,0 +1,237 @@
+/*
+ *      Meson Watchdog Driver
+ *
+ *      Copyright (c) 2014 Carlo Caione
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+#define DRV_NAME		"meson_wdt"
+
+#define MESON_WDT_TC		0x00
+#define MESON_WDT_DC_RESET	(3 << 24)
+
+#define MESON_WDT_RESET		0x04
+
+#define MESON_WDT_TIMEOUT	30
+#define MESON_WDT_MIN_TIMEOUT	1
+
+#define MESON_SEC_TO_TC(s, c)	((s) * (c))
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static unsigned int timeout;
+
+struct meson_wdt_data {
+	unsigned int enable;
+	unsigned int terminal_count_mask;
+	unsigned int count_unit;
+};
+
+static struct meson_wdt_data meson6_wdt_data = {
+	.enable			= BIT(22),
+	.terminal_count_mask	= 0x3fffff,
+	.count_unit		= 100000, /* 10 us */
+};
+
+static struct meson_wdt_data meson8b_wdt_data = {
+	.enable			= BIT(19),
+	.terminal_count_mask	= 0xffff,
+	.count_unit		= 7812, /* 128 us */
+};
+
+struct meson_wdt_dev {
+	struct watchdog_device wdt_dev;
+	void __iomem *wdt_base;
+	const struct meson_wdt_data *data;
+};
+
+static int meson_wdt_restart(struct watchdog_device *wdt_dev,
+			     unsigned long action, void *data)
+{
+	struct meson_wdt_dev *meson_wdt = watchdog_get_drvdata(wdt_dev);
+	u32 tc_reboot = MESON_WDT_DC_RESET;
+
+	tc_reboot |= meson_wdt->data->enable;
+
+	while (1) {
+		writel(tc_reboot, meson_wdt->wdt_base + MESON_WDT_TC);
+		mdelay(5);
+	}
+
+	return 0;
+}
+
+static int meson_wdt_ping(struct watchdog_device *wdt_dev)
+{
+	struct meson_wdt_dev *meson_wdt = watchdog_get_drvdata(wdt_dev);
+
+	writel(0, meson_wdt->wdt_base + MESON_WDT_RESET);
+
+	return 0;
+}
+
+static void meson_wdt_change_timeout(struct watchdog_device *wdt_dev,
+				     unsigned int timeout)
+{
+	struct meson_wdt_dev *meson_wdt = watchdog_get_drvdata(wdt_dev);
+	u32 reg;
+
+	reg = readl(meson_wdt->wdt_base + MESON_WDT_TC);
+	reg &= ~meson_wdt->data->terminal_count_mask;
+	reg |= MESON_SEC_TO_TC(timeout, meson_wdt->data->count_unit);
+	writel(reg, meson_wdt->wdt_base + MESON_WDT_TC);
+}
+
+static int meson_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				 unsigned int timeout)
+{
+	wdt_dev->timeout = timeout;
+
+	meson_wdt_change_timeout(wdt_dev, timeout);
+	meson_wdt_ping(wdt_dev);
+
+	return 0;
+}
+
+static int meson_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct meson_wdt_dev *meson_wdt = watchdog_get_drvdata(wdt_dev);
+	u32 reg;
+
+	reg = readl(meson_wdt->wdt_base + MESON_WDT_TC);
+	reg &= ~meson_wdt->data->enable;
+	writel(reg, meson_wdt->wdt_base + MESON_WDT_TC);
+
+	return 0;
+}
+
+static int meson_wdt_start(struct watchdog_device *wdt_dev)
+{
+	struct meson_wdt_dev *meson_wdt = watchdog_get_drvdata(wdt_dev);
+	u32 reg;
+
+	meson_wdt_change_timeout(wdt_dev, meson_wdt->wdt_dev.timeout);
+	meson_wdt_ping(wdt_dev);
+
+	reg = readl(meson_wdt->wdt_base + MESON_WDT_TC);
+	reg |= meson_wdt->data->enable;
+	writel(reg, meson_wdt->wdt_base + MESON_WDT_TC);
+
+	return 0;
+}
+
+static const struct watchdog_info meson_wdt_info = {
+	.identity	= DRV_NAME,
+	.options	= WDIOF_SETTIMEOUT |
+			  WDIOF_KEEPALIVEPING |
+			  WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops meson_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= meson_wdt_start,
+	.stop		= meson_wdt_stop,
+	.ping		= meson_wdt_ping,
+	.set_timeout	= meson_wdt_set_timeout,
+	.restart        = meson_wdt_restart,
+};
+
+static const struct of_device_id meson_wdt_dt_ids[] = {
+	{ .compatible = "amlogic,meson6-wdt", .data = &meson6_wdt_data },
+	{ .compatible = "amlogic,meson8-wdt", .data = &meson6_wdt_data },
+	{ .compatible = "amlogic,meson8b-wdt", .data = &meson8b_wdt_data },
+	{ .compatible = "amlogic,meson8m2-wdt", .data = &meson8b_wdt_data },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, meson_wdt_dt_ids);
+
+static int meson_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct meson_wdt_dev *meson_wdt;
+	const struct of_device_id *of_id;
+	int err;
+
+	meson_wdt = devm_kzalloc(&pdev->dev, sizeof(*meson_wdt), GFP_KERNEL);
+	if (!meson_wdt)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	meson_wdt->wdt_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(meson_wdt->wdt_base))
+		return PTR_ERR(meson_wdt->wdt_base);
+
+	of_id = of_match_device(meson_wdt_dt_ids, &pdev->dev);
+	if (!of_id) {
+		dev_err(&pdev->dev, "Unable to initialize WDT data\n");
+		return -ENODEV;
+	}
+	meson_wdt->data = of_id->data;
+
+	meson_wdt->wdt_dev.parent = &pdev->dev;
+	meson_wdt->wdt_dev.info = &meson_wdt_info;
+	meson_wdt->wdt_dev.ops = &meson_wdt_ops;
+	meson_wdt->wdt_dev.max_timeout =
+		meson_wdt->data->terminal_count_mask / meson_wdt->data->count_unit;
+	meson_wdt->wdt_dev.min_timeout = MESON_WDT_MIN_TIMEOUT;
+	meson_wdt->wdt_dev.timeout = min_t(unsigned int,
+					   MESON_WDT_TIMEOUT,
+					   meson_wdt->wdt_dev.max_timeout);
+
+	watchdog_set_drvdata(&meson_wdt->wdt_dev, meson_wdt);
+
+	watchdog_init_timeout(&meson_wdt->wdt_dev, timeout, &pdev->dev);
+	watchdog_set_nowayout(&meson_wdt->wdt_dev, nowayout);
+	watchdog_set_restart_priority(&meson_wdt->wdt_dev, 128);
+
+	meson_wdt_stop(&meson_wdt->wdt_dev);
+
+	watchdog_stop_on_reboot(&meson_wdt->wdt_dev);
+	err = devm_watchdog_register_device(&pdev->dev, &meson_wdt->wdt_dev);
+	if (err)
+		return err;
+
+	dev_info(&pdev->dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)",
+		 meson_wdt->wdt_dev.timeout, nowayout);
+
+	return 0;
+}
+
+static struct platform_driver meson_wdt_driver = {
+	.probe		= meson_wdt_probe,
+	.driver		= {
+		.name		= DRV_NAME,
+		.of_match_table	= meson_wdt_dt_ids,
+	},
+};
+
+module_platform_driver(meson_wdt_driver);
+
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout, "Watchdog heartbeat in seconds");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		 "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
+MODULE_DESCRIPTION("Meson Watchdog Timer Driver");
diff --git a/drivers/watchdog/mixcomwd.c b/drivers/watchdog/mixcomwd.c
new file mode 100644
index 000000000..3cc07447c
--- /dev/null
+++ b/drivers/watchdog/mixcomwd.c
@@ -0,0 +1,317 @@
+/*
+ * MixCom Watchdog: A Simple Hardware Watchdog Device
+ * Based on Softdog driver by Alan Cox and PC Watchdog driver by Ken Hollis
+ *
+ * Author: Gergely Madarasz <gorgo@itc.hu>
+ *
+ * Copyright (c) 1999 ITConsult-Pro Co. <info@itc.hu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Version 0.1 (99/04/15):
+ *		- first version
+ *
+ * Version 0.2 (99/06/16):
+ *		- added kernel timer watchdog ping after close
+ *		  since the hardware does not support watchdog shutdown
+ *
+ * Version 0.3 (99/06/21):
+ *		- added WDIOC_GETSTATUS and WDIOC_GETSUPPORT ioctl calls
+ *
+ * Version 0.3.1 (99/06/22):
+ *		- allow module removal while internal timer is active,
+ *		  print warning about probable reset
+ *
+ * Version 0.4 (99/11/15):
+ *		- support for one more type board
+ *
+ * Version 0.5 (2001/12/14) Matt Domsch <Matt_Domsch@dell.com>
+ *		- added nowayout module option to override
+ *		  CONFIG_WATCHDOG_NOWAYOUT
+ *
+ * Version 0.6 (2002/04/12): Rob Radez <rob@osinvestor.com>
+ *		- make mixcomwd_opened unsigned,
+ *		  removed lock_kernel/unlock_kernel from mixcomwd_release,
+ *		  modified ioctl a bit to conform to API
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define VERSION "0.6"
+#define WATCHDOG_NAME "mixcomwd"
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/ioport.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+/*
+ * We have two types of cards that can be probed:
+ * 1) The Mixcom cards: these cards can be found at addresses
+ *    0x180, 0x280, 0x380 with an additional offset of 0xc10.
+ *    (Or 0xd90, 0xe90, 0xf90).
+ * 2) The FlashCOM cards: these cards can be set up at
+ *    0x300 -> 0x378, in 0x8 jumps with an offset of 0x04.
+ *    (Or 0x304 -> 0x37c in 0x8 jumps).
+ *    Each card has it's own ID.
+ */
+#define MIXCOM_ID 0x11
+#define FLASHCOM_ID 0x18
+static struct {
+	int ioport;
+	int id;
+} mixcomwd_io_info[] = {
+	/* The Mixcom cards */
+	{0x0d90, MIXCOM_ID},
+	{0x0e90, MIXCOM_ID},
+	{0x0f90, MIXCOM_ID},
+	/* The FlashCOM cards */
+	{0x0304, FLASHCOM_ID},
+	{0x030c, FLASHCOM_ID},
+	{0x0314, FLASHCOM_ID},
+	{0x031c, FLASHCOM_ID},
+	{0x0324, FLASHCOM_ID},
+	{0x032c, FLASHCOM_ID},
+	{0x0334, FLASHCOM_ID},
+	{0x033c, FLASHCOM_ID},
+	{0x0344, FLASHCOM_ID},
+	{0x034c, FLASHCOM_ID},
+	{0x0354, FLASHCOM_ID},
+	{0x035c, FLASHCOM_ID},
+	{0x0364, FLASHCOM_ID},
+	{0x036c, FLASHCOM_ID},
+	{0x0374, FLASHCOM_ID},
+	{0x037c, FLASHCOM_ID},
+	/* The end of the list */
+	{0x0000, 0},
+};
+
+static void mixcomwd_timerfun(struct timer_list *unused);
+
+static unsigned long mixcomwd_opened; /* long req'd for setbit --RR */
+
+static int watchdog_port;
+static int mixcomwd_timer_alive;
+static DEFINE_TIMER(mixcomwd_timer, mixcomwd_timerfun);
+static char expect_close;
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static void mixcomwd_ping(void)
+{
+	outb_p(55, watchdog_port);
+	return;
+}
+
+static void mixcomwd_timerfun(struct timer_list *unused)
+{
+	mixcomwd_ping();
+	mod_timer(&mixcomwd_timer, jiffies + 5 * HZ);
+}
+
+/*
+ *	Allow only one person to hold it open
+ */
+
+static int mixcomwd_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &mixcomwd_opened))
+		return -EBUSY;
+
+	mixcomwd_ping();
+
+	if (nowayout)
+		/*
+		 * fops_get() code via open() has already done
+		 * a try_module_get() so it is safe to do the
+		 * __module_get().
+		 */
+		__module_get(THIS_MODULE);
+	else {
+		if (mixcomwd_timer_alive) {
+			del_timer(&mixcomwd_timer);
+			mixcomwd_timer_alive = 0;
+		}
+	}
+	return nonseekable_open(inode, file);
+}
+
+static int mixcomwd_release(struct inode *inode, struct file *file)
+{
+	if (expect_close == 42) {
+		if (mixcomwd_timer_alive) {
+			pr_err("release called while internal timer alive\n");
+			return -EBUSY;
+		}
+		mixcomwd_timer_alive = 1;
+		mod_timer(&mixcomwd_timer, jiffies + 5 * HZ);
+	} else
+		pr_crit("WDT device closed unexpectedly.  WDT will not stop!\n");
+
+	clear_bit(0, &mixcomwd_opened);
+	expect_close = 0;
+	return 0;
+}
+
+
+static ssize_t mixcomwd_write(struct file *file, const char __user *data,
+						size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			expect_close = 0;
+
+			for (i = 0; i != len; i++) {
+				char c;
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+		mixcomwd_ping();
+	}
+	return len;
+}
+
+static long mixcomwd_ioctl(struct file *file,
+				unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int status;
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+		.firmware_version = 1,
+		.identity = "MixCOM watchdog",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+	case WDIOC_GETSTATUS:
+		status = mixcomwd_opened;
+		if (!nowayout)
+			status |= mixcomwd_timer_alive;
+		return put_user(status, p);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		mixcomwd_ping();
+		break;
+	default:
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+static const struct file_operations mixcomwd_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= mixcomwd_write,
+	.unlocked_ioctl	= mixcomwd_ioctl,
+	.open		= mixcomwd_open,
+	.release	= mixcomwd_release,
+};
+
+static struct miscdevice mixcomwd_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &mixcomwd_fops,
+};
+
+static int __init checkcard(int port, int card_id)
+{
+	int id;
+
+	if (!request_region(port, 1, "MixCOM watchdog"))
+		return 0;
+
+	id = inb_p(port);
+	if (card_id == MIXCOM_ID)
+		id &= 0x3f;
+
+	if (id != card_id) {
+		release_region(port, 1);
+		return 0;
+	}
+	return 1;
+}
+
+static int __init mixcomwd_init(void)
+{
+	int i, ret, found = 0;
+
+	for (i = 0; !found && mixcomwd_io_info[i].ioport != 0; i++) {
+		if (checkcard(mixcomwd_io_info[i].ioport,
+			      mixcomwd_io_info[i].id)) {
+			found = 1;
+			watchdog_port = mixcomwd_io_info[i].ioport;
+		}
+	}
+
+	if (!found) {
+		pr_err("No card detected, or port not available\n");
+		return -ENODEV;
+	}
+
+	ret = misc_register(&mixcomwd_miscdev);
+	if (ret) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, ret);
+		goto error_misc_register_watchdog;
+	}
+
+	pr_info("MixCOM watchdog driver v%s, watchdog port at 0x%3x\n",
+		VERSION, watchdog_port);
+
+	return 0;
+
+error_misc_register_watchdog:
+	release_region(watchdog_port, 1);
+	watchdog_port = 0x0000;
+	return ret;
+}
+
+static void __exit mixcomwd_exit(void)
+{
+	if (!nowayout) {
+		if (mixcomwd_timer_alive) {
+			pr_warn("I quit now, hardware will probably reboot!\n");
+			del_timer_sync(&mixcomwd_timer);
+			mixcomwd_timer_alive = 0;
+		}
+	}
+	misc_deregister(&mixcomwd_miscdev);
+	release_region(watchdog_port, 1);
+}
+
+module_init(mixcomwd_init);
+module_exit(mixcomwd_exit);
+
+MODULE_AUTHOR("Gergely Madarasz <gorgo@itc.hu>");
+MODULE_DESCRIPTION("MixCom Watchdog driver");
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/moxart_wdt.c b/drivers/watchdog/moxart_wdt.c
new file mode 100644
index 000000000..430c3ab84
--- /dev/null
+++ b/drivers/watchdog/moxart_wdt.c
@@ -0,0 +1,179 @@
+/*
+ * MOXA ART SoCs watchdog driver.
+ *
+ * Copyright (C) 2013 Jonas Jensen
+ *
+ * Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/moduleparam.h>
+
+#define REG_COUNT			0x4
+#define REG_MODE			0x8
+#define REG_ENABLE			0xC
+
+struct moxart_wdt_dev {
+	struct watchdog_device dev;
+	void __iomem *base;
+	unsigned int clock_frequency;
+};
+
+static int heartbeat;
+
+static int moxart_wdt_restart(struct watchdog_device *wdt_dev,
+			      unsigned long action, void *data)
+{
+	struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
+
+	writel(1, moxart_wdt->base + REG_COUNT);
+	writel(0x5ab9, moxart_wdt->base + REG_MODE);
+	writel(0x03, moxart_wdt->base + REG_ENABLE);
+
+	return 0;
+}
+
+static int moxart_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
+
+	writel(0, moxart_wdt->base + REG_ENABLE);
+
+	return 0;
+}
+
+static int moxart_wdt_start(struct watchdog_device *wdt_dev)
+{
+	struct moxart_wdt_dev *moxart_wdt = watchdog_get_drvdata(wdt_dev);
+
+	writel(moxart_wdt->clock_frequency * wdt_dev->timeout,
+	       moxart_wdt->base + REG_COUNT);
+	writel(0x5ab9, moxart_wdt->base + REG_MODE);
+	writel(0x03, moxart_wdt->base + REG_ENABLE);
+
+	return 0;
+}
+
+static int moxart_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				  unsigned int timeout)
+{
+	wdt_dev->timeout = timeout;
+
+	return 0;
+}
+
+static const struct watchdog_info moxart_wdt_info = {
+	.identity       = "moxart-wdt",
+	.options        = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+			  WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops moxart_wdt_ops = {
+	.owner          = THIS_MODULE,
+	.start          = moxart_wdt_start,
+	.stop           = moxart_wdt_stop,
+	.set_timeout    = moxart_wdt_set_timeout,
+	.restart        = moxart_wdt_restart,
+};
+
+static int moxart_wdt_probe(struct platform_device *pdev)
+{
+	struct moxart_wdt_dev *moxart_wdt;
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct resource *res;
+	struct clk *clk;
+	int err;
+	unsigned int max_timeout;
+	bool nowayout = WATCHDOG_NOWAYOUT;
+
+	moxart_wdt = devm_kzalloc(dev, sizeof(*moxart_wdt), GFP_KERNEL);
+	if (!moxart_wdt)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, moxart_wdt);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	moxart_wdt->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(moxart_wdt->base))
+		return PTR_ERR(moxart_wdt->base);
+
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk)) {
+		pr_err("%s: of_clk_get failed\n", __func__);
+		return PTR_ERR(clk);
+	}
+
+	moxart_wdt->clock_frequency = clk_get_rate(clk);
+	if (moxart_wdt->clock_frequency == 0) {
+		pr_err("%s: incorrect clock frequency\n", __func__);
+		return -EINVAL;
+	}
+
+	max_timeout = UINT_MAX / moxart_wdt->clock_frequency;
+
+	moxart_wdt->dev.info = &moxart_wdt_info;
+	moxart_wdt->dev.ops = &moxart_wdt_ops;
+	moxart_wdt->dev.timeout = max_timeout;
+	moxart_wdt->dev.min_timeout = 1;
+	moxart_wdt->dev.max_timeout = max_timeout;
+	moxart_wdt->dev.parent = dev;
+
+	watchdog_init_timeout(&moxart_wdt->dev, heartbeat, dev);
+	watchdog_set_nowayout(&moxart_wdt->dev, nowayout);
+	watchdog_set_restart_priority(&moxart_wdt->dev, 128);
+
+	watchdog_set_drvdata(&moxart_wdt->dev, moxart_wdt);
+
+	err = watchdog_register_device(&moxart_wdt->dev);
+	if (err)
+		return err;
+
+	dev_dbg(dev, "Watchdog enabled (heartbeat=%d sec, nowayout=%d)\n",
+		moxart_wdt->dev.timeout, nowayout);
+
+	return 0;
+}
+
+static int moxart_wdt_remove(struct platform_device *pdev)
+{
+	struct moxart_wdt_dev *moxart_wdt = platform_get_drvdata(pdev);
+
+	moxart_wdt_stop(&moxart_wdt->dev);
+
+	return 0;
+}
+
+static const struct of_device_id moxart_watchdog_match[] = {
+	{ .compatible = "moxa,moxart-watchdog" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, moxart_watchdog_match);
+
+static struct platform_driver moxart_wdt_driver = {
+	.probe      = moxart_wdt_probe,
+	.remove     = moxart_wdt_remove,
+	.driver     = {
+		.name		= "moxart-watchdog",
+		.of_match_table	= moxart_watchdog_match,
+	},
+};
+module_platform_driver(moxart_wdt_driver);
+
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds");
+
+MODULE_DESCRIPTION("MOXART watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>");
diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
new file mode 100644
index 000000000..aca2d6323
--- /dev/null
+++ b/drivers/watchdog/mpc8xxx_wdt.c
@@ -0,0 +1,263 @@
+/*
+ * mpc8xxx_wdt.c - MPC8xx/MPC83xx/MPC86xx watchdog userspace interface
+ *
+ * Authors: Dave Updegraff <dave@cray.org>
+ *	    Kumar Gala <galak@kernel.crashing.org>
+ *		Attribution: from 83xx_wst: Florian Schirmer <jolt@tuxbox.org>
+ *				..and from sc520_wdt
+ * Copyright (c) 2008  MontaVista Software, Inc.
+ *                     Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * Note: it appears that you can only actually ENABLE or DISABLE the thing
+ * once after POR. Once enabled, you cannot disable, and vice versa.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <sysdev/fsl_soc.h>
+
+#define WATCHDOG_TIMEOUT 10
+
+struct mpc8xxx_wdt {
+	__be32 res0;
+	__be32 swcrr; /* System watchdog control register */
+#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */
+#define SWCRR_SWF  0x00000008 /* Software Watchdog Freeze (mpc8xx). */
+#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit. */
+#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit.*/
+#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit. */
+	__be32 swcnr; /* System watchdog count register */
+	u8 res1[2];
+	__be16 swsrr; /* System watchdog service register */
+	u8 res2[0xF0];
+};
+
+struct mpc8xxx_wdt_type {
+	int prescaler;
+	bool hw_enabled;
+};
+
+struct mpc8xxx_wdt_ddata {
+	struct mpc8xxx_wdt __iomem *base;
+	struct watchdog_device wdd;
+	spinlock_t lock;
+	u16 swtc;
+};
+
+static u16 timeout;
+module_param(timeout, ushort, 0);
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. (1<timeout<65535, default="
+	__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+
+static bool reset = 1;
+module_param(reset, bool, 0);
+MODULE_PARM_DESC(reset,
+	"Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+		 "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static void mpc8xxx_wdt_keepalive(struct mpc8xxx_wdt_ddata *ddata)
+{
+	/* Ping the WDT */
+	spin_lock(&ddata->lock);
+	out_be16(&ddata->base->swsrr, 0x556c);
+	out_be16(&ddata->base->swsrr, 0xaa39);
+	spin_unlock(&ddata->lock);
+}
+
+static int mpc8xxx_wdt_start(struct watchdog_device *w)
+{
+	struct mpc8xxx_wdt_ddata *ddata =
+		container_of(w, struct mpc8xxx_wdt_ddata, wdd);
+	u32 tmp = in_be32(&ddata->base->swcrr);
+
+	/* Good, fire up the show */
+	tmp &= ~(SWCRR_SWTC | SWCRR_SWF | SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR);
+	tmp |= SWCRR_SWEN | SWCRR_SWPR | (ddata->swtc << 16);
+
+	if (reset)
+		tmp |= SWCRR_SWRI;
+
+	out_be32(&ddata->base->swcrr, tmp);
+
+	tmp = in_be32(&ddata->base->swcrr);
+	if (!(tmp & SWCRR_SWEN))
+		return -EOPNOTSUPP;
+
+	ddata->swtc = tmp >> 16;
+	set_bit(WDOG_HW_RUNNING, &ddata->wdd.status);
+
+	return 0;
+}
+
+static int mpc8xxx_wdt_ping(struct watchdog_device *w)
+{
+	struct mpc8xxx_wdt_ddata *ddata =
+		container_of(w, struct mpc8xxx_wdt_ddata, wdd);
+
+	mpc8xxx_wdt_keepalive(ddata);
+	return 0;
+}
+
+static struct watchdog_info mpc8xxx_wdt_info = {
+	.options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT,
+	.firmware_version = 1,
+	.identity = "MPC8xxx",
+};
+
+static struct watchdog_ops mpc8xxx_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = mpc8xxx_wdt_start,
+	.ping = mpc8xxx_wdt_ping,
+};
+
+static int mpc8xxx_wdt_probe(struct platform_device *ofdev)
+{
+	int ret;
+	struct resource *res;
+	const struct mpc8xxx_wdt_type *wdt_type;
+	struct mpc8xxx_wdt_ddata *ddata;
+	u32 freq = fsl_get_sys_freq();
+	bool enabled;
+
+	wdt_type = of_device_get_match_data(&ofdev->dev);
+	if (!wdt_type)
+		return -EINVAL;
+
+	if (!freq || freq == -1)
+		return -EINVAL;
+
+	ddata = devm_kzalloc(&ofdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
+	ddata->base = devm_ioremap_resource(&ofdev->dev, res);
+	if (IS_ERR(ddata->base))
+		return PTR_ERR(ddata->base);
+
+	enabled = in_be32(&ddata->base->swcrr) & SWCRR_SWEN;
+	if (!enabled && wdt_type->hw_enabled) {
+		pr_info("could not be enabled in software\n");
+		return -ENODEV;
+	}
+
+	spin_lock_init(&ddata->lock);
+
+	ddata->wdd.info = &mpc8xxx_wdt_info,
+	ddata->wdd.ops = &mpc8xxx_wdt_ops,
+
+	ddata->wdd.timeout = WATCHDOG_TIMEOUT;
+	watchdog_init_timeout(&ddata->wdd, timeout, &ofdev->dev);
+
+	watchdog_set_nowayout(&ddata->wdd, nowayout);
+
+	ddata->swtc = min(ddata->wdd.timeout * freq / wdt_type->prescaler,
+			  0xffffU);
+
+	/*
+	 * If the watchdog was previously enabled or we're running on
+	 * MPC8xxx, we should ping the wdt from the kernel until the
+	 * userspace handles it.
+	 */
+	if (enabled)
+		mpc8xxx_wdt_start(&ddata->wdd);
+
+	ddata->wdd.max_hw_heartbeat_ms = (ddata->swtc * wdt_type->prescaler) /
+					 (freq / 1000);
+	ddata->wdd.min_timeout = ddata->wdd.max_hw_heartbeat_ms / 1000;
+	if (ddata->wdd.timeout < ddata->wdd.min_timeout)
+		ddata->wdd.timeout = ddata->wdd.min_timeout;
+
+	ret = watchdog_register_device(&ddata->wdd);
+	if (ret) {
+		pr_err("cannot register watchdog device (err=%d)\n", ret);
+		return ret;
+	}
+
+	pr_info("WDT driver for MPC8xxx initialized. mode:%s timeout=%d sec\n",
+		reset ? "reset" : "interrupt", ddata->wdd.timeout);
+
+	platform_set_drvdata(ofdev, ddata);
+	return 0;
+}
+
+static int mpc8xxx_wdt_remove(struct platform_device *ofdev)
+{
+	struct mpc8xxx_wdt_ddata *ddata = platform_get_drvdata(ofdev);
+
+	pr_crit("Watchdog removed, expect the %s soon!\n",
+		reset ? "reset" : "machine check exception");
+	watchdog_unregister_device(&ddata->wdd);
+
+	return 0;
+}
+
+static const struct of_device_id mpc8xxx_wdt_match[] = {
+	{
+		.compatible = "mpc83xx_wdt",
+		.data = &(struct mpc8xxx_wdt_type) {
+			.prescaler = 0x10000,
+		},
+	},
+	{
+		.compatible = "fsl,mpc8610-wdt",
+		.data = &(struct mpc8xxx_wdt_type) {
+			.prescaler = 0x10000,
+			.hw_enabled = true,
+		},
+	},
+	{
+		.compatible = "fsl,mpc823-wdt",
+		.data = &(struct mpc8xxx_wdt_type) {
+			.prescaler = 0x800,
+			.hw_enabled = true,
+		},
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, mpc8xxx_wdt_match);
+
+static struct platform_driver mpc8xxx_wdt_driver = {
+	.probe		= mpc8xxx_wdt_probe,
+	.remove		= mpc8xxx_wdt_remove,
+	.driver = {
+		.name = "mpc8xxx_wdt",
+		.of_match_table = mpc8xxx_wdt_match,
+	},
+};
+
+static int __init mpc8xxx_wdt_init(void)
+{
+	return platform_driver_register(&mpc8xxx_wdt_driver);
+}
+arch_initcall(mpc8xxx_wdt_init);
+
+static void __exit mpc8xxx_wdt_exit(void)
+{
+	platform_driver_unregister(&mpc8xxx_wdt_driver);
+}
+module_exit(mpc8xxx_wdt_exit);
+
+MODULE_AUTHOR("Dave Updegraff, Kumar Gala");
+MODULE_DESCRIPTION("Driver for watchdog timer in MPC8xx/MPC83xx/MPC86xx "
+		   "uProcessors");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/mt7621_wdt.c b/drivers/watchdog/mt7621_wdt.c
new file mode 100644
index 000000000..81208cd3f
--- /dev/null
+++ b/drivers/watchdog/mt7621_wdt.c
@@ -0,0 +1,194 @@
+/*
+ * Ralink MT7621/MT7628 built-in hardware watchdog timer
+ *
+ * Copyright (C) 2014 John Crispin <john@phrozen.org>
+ *
+ * This driver was based on: drivers/watchdog/rt2880_wdt.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/watchdog.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define SYSC_RSTSTAT			0x38
+#define WDT_RST_CAUSE			BIT(1)
+
+#define RALINK_WDT_TIMEOUT		30
+
+#define TIMER_REG_TMRSTAT		0x00
+#define TIMER_REG_TMR1LOAD		0x24
+#define TIMER_REG_TMR1CTL		0x20
+
+#define TMR1CTL_ENABLE			BIT(7)
+#define TMR1CTL_RESTART			BIT(9)
+#define TMR1CTL_PRESCALE_SHIFT		16
+
+static void __iomem *mt7621_wdt_base;
+static struct reset_control *mt7621_wdt_reset;
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		 "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static inline void rt_wdt_w32(unsigned reg, u32 val)
+{
+	iowrite32(val, mt7621_wdt_base + reg);
+}
+
+static inline u32 rt_wdt_r32(unsigned reg)
+{
+	return ioread32(mt7621_wdt_base + reg);
+}
+
+static int mt7621_wdt_ping(struct watchdog_device *w)
+{
+	rt_wdt_w32(TIMER_REG_TMRSTAT, TMR1CTL_RESTART);
+
+	return 0;
+}
+
+static int mt7621_wdt_set_timeout(struct watchdog_device *w, unsigned int t)
+{
+	w->timeout = t;
+	rt_wdt_w32(TIMER_REG_TMR1LOAD, t * 1000);
+	mt7621_wdt_ping(w);
+
+	return 0;
+}
+
+static int mt7621_wdt_start(struct watchdog_device *w)
+{
+	u32 t;
+
+	/* set the prescaler to 1ms == 1000us */
+	rt_wdt_w32(TIMER_REG_TMR1CTL, 1000 << TMR1CTL_PRESCALE_SHIFT);
+
+	mt7621_wdt_set_timeout(w, w->timeout);
+
+	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
+	t |= TMR1CTL_ENABLE;
+	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
+
+	return 0;
+}
+
+static int mt7621_wdt_stop(struct watchdog_device *w)
+{
+	u32 t;
+
+	mt7621_wdt_ping(w);
+
+	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
+	t &= ~TMR1CTL_ENABLE;
+	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
+
+	return 0;
+}
+
+static int mt7621_wdt_bootcause(void)
+{
+	if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE)
+		return WDIOF_CARDRESET;
+
+	return 0;
+}
+
+static int mt7621_wdt_is_running(struct watchdog_device *w)
+{
+	return !!(rt_wdt_r32(TIMER_REG_TMR1CTL) & TMR1CTL_ENABLE);
+}
+
+static const struct watchdog_info mt7621_wdt_info = {
+	.identity = "Mediatek Watchdog",
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops mt7621_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = mt7621_wdt_start,
+	.stop = mt7621_wdt_stop,
+	.ping = mt7621_wdt_ping,
+	.set_timeout = mt7621_wdt_set_timeout,
+};
+
+static struct watchdog_device mt7621_wdt_dev = {
+	.info = &mt7621_wdt_info,
+	.ops = &mt7621_wdt_ops,
+	.min_timeout = 1,
+	.max_timeout = 0xfffful / 1000,
+};
+
+static int mt7621_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mt7621_wdt_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(mt7621_wdt_base))
+		return PTR_ERR(mt7621_wdt_base);
+
+	mt7621_wdt_reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (!IS_ERR(mt7621_wdt_reset))
+		reset_control_deassert(mt7621_wdt_reset);
+
+	mt7621_wdt_dev.bootstatus = mt7621_wdt_bootcause();
+
+	watchdog_init_timeout(&mt7621_wdt_dev, mt7621_wdt_dev.max_timeout,
+			      &pdev->dev);
+	watchdog_set_nowayout(&mt7621_wdt_dev, nowayout);
+	if (mt7621_wdt_is_running(&mt7621_wdt_dev)) {
+		/*
+		 * Make sure to apply timeout from watchdog core, taking
+		 * the prescaler of this driver here into account (the
+		 * boot loader might be using a different prescaler).
+		 *
+		 * To avoid spurious resets because of different scaling,
+		 * we first disable the watchdog, set the new prescaler
+		 * and timeout, and then re-enable the watchdog.
+		 */
+		mt7621_wdt_stop(&mt7621_wdt_dev);
+		mt7621_wdt_start(&mt7621_wdt_dev);
+		set_bit(WDOG_HW_RUNNING, &mt7621_wdt_dev.status);
+	}
+
+	return devm_watchdog_register_device(&pdev->dev, &mt7621_wdt_dev);
+}
+
+static void mt7621_wdt_shutdown(struct platform_device *pdev)
+{
+	mt7621_wdt_stop(&mt7621_wdt_dev);
+}
+
+static const struct of_device_id mt7621_wdt_match[] = {
+	{ .compatible = "mediatek,mt7621-wdt" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mt7621_wdt_match);
+
+static struct platform_driver mt7621_wdt_driver = {
+	.probe		= mt7621_wdt_probe,
+	.shutdown	= mt7621_wdt_shutdown,
+	.driver		= {
+		.name		= KBUILD_MODNAME,
+		.of_match_table	= mt7621_wdt_match,
+	},
+};
+
+module_platform_driver(mt7621_wdt_driver);
+
+MODULE_DESCRIPTION("MediaTek MT762x hardware watchdog driver");
+MODULE_AUTHOR("John Crispin <john@phrozen.org");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
new file mode 100644
index 000000000..4baf64f21
--- /dev/null
+++ b/drivers/watchdog/mtk_wdt.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Mediatek Watchdog Driver
+ *
+ * Copyright (C) 2014 Matthias Brugger
+ *
+ * Matthias Brugger <matthias.bgg@gmail.com>
+ *
+ * Based on sunxi_wdt.c
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <linux/delay.h>
+
+#define WDT_MAX_TIMEOUT		31
+#define WDT_MIN_TIMEOUT		1
+#define WDT_LENGTH_TIMEOUT(n)	((n) << 5)
+
+#define WDT_LENGTH		0x04
+#define WDT_LENGTH_KEY		0x8
+
+#define WDT_RST			0x08
+#define WDT_RST_RELOAD		0x1971
+
+#define WDT_MODE		0x00
+#define WDT_MODE_EN		(1 << 0)
+#define WDT_MODE_EXT_POL_LOW	(0 << 1)
+#define WDT_MODE_EXT_POL_HIGH	(1 << 1)
+#define WDT_MODE_EXRST_EN	(1 << 2)
+#define WDT_MODE_IRQ_EN		(1 << 3)
+#define WDT_MODE_AUTO_START	(1 << 4)
+#define WDT_MODE_DUAL_EN	(1 << 6)
+#define WDT_MODE_KEY		0x22000000
+
+#define WDT_SWRST		0x14
+#define WDT_SWRST_KEY		0x1209
+
+#define DRV_NAME		"mtk-wdt"
+#define DRV_VERSION		"1.0"
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static unsigned int timeout;
+
+struct mtk_wdt_dev {
+	struct watchdog_device wdt_dev;
+	void __iomem *wdt_base;
+};
+
+static int mtk_wdt_restart(struct watchdog_device *wdt_dev,
+			   unsigned long action, void *data)
+{
+	struct mtk_wdt_dev *mtk_wdt = watchdog_get_drvdata(wdt_dev);
+	void __iomem *wdt_base;
+
+	wdt_base = mtk_wdt->wdt_base;
+
+	while (1) {
+		writel(WDT_SWRST_KEY, wdt_base + WDT_SWRST);
+		mdelay(5);
+	}
+
+	return 0;
+}
+
+static int mtk_wdt_ping(struct watchdog_device *wdt_dev)
+{
+	struct mtk_wdt_dev *mtk_wdt = watchdog_get_drvdata(wdt_dev);
+	void __iomem *wdt_base = mtk_wdt->wdt_base;
+
+	iowrite32(WDT_RST_RELOAD, wdt_base + WDT_RST);
+
+	return 0;
+}
+
+static int mtk_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				unsigned int timeout)
+{
+	struct mtk_wdt_dev *mtk_wdt = watchdog_get_drvdata(wdt_dev);
+	void __iomem *wdt_base = mtk_wdt->wdt_base;
+	u32 reg;
+
+	wdt_dev->timeout = timeout;
+
+	/*
+	 * One bit is the value of 512 ticks
+	 * The clock has 32 KHz
+	 */
+	reg = WDT_LENGTH_TIMEOUT(timeout << 6) | WDT_LENGTH_KEY;
+	iowrite32(reg, wdt_base + WDT_LENGTH);
+
+	mtk_wdt_ping(wdt_dev);
+
+	return 0;
+}
+
+static int mtk_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct mtk_wdt_dev *mtk_wdt = watchdog_get_drvdata(wdt_dev);
+	void __iomem *wdt_base = mtk_wdt->wdt_base;
+	u32 reg;
+
+	reg = readl(wdt_base + WDT_MODE);
+	reg &= ~WDT_MODE_EN;
+	reg |= WDT_MODE_KEY;
+	iowrite32(reg, wdt_base + WDT_MODE);
+
+	return 0;
+}
+
+static int mtk_wdt_start(struct watchdog_device *wdt_dev)
+{
+	u32 reg;
+	struct mtk_wdt_dev *mtk_wdt = watchdog_get_drvdata(wdt_dev);
+	void __iomem *wdt_base = mtk_wdt->wdt_base;
+	int ret;
+
+	ret = mtk_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
+	if (ret < 0)
+		return ret;
+
+	reg = ioread32(wdt_base + WDT_MODE);
+	reg &= ~(WDT_MODE_IRQ_EN | WDT_MODE_DUAL_EN);
+	reg |= (WDT_MODE_EN | WDT_MODE_KEY);
+	iowrite32(reg, wdt_base + WDT_MODE);
+
+	return 0;
+}
+
+static const struct watchdog_info mtk_wdt_info = {
+	.identity	= DRV_NAME,
+	.options	= WDIOF_SETTIMEOUT |
+			  WDIOF_KEEPALIVEPING |
+			  WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops mtk_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= mtk_wdt_start,
+	.stop		= mtk_wdt_stop,
+	.ping		= mtk_wdt_ping,
+	.set_timeout	= mtk_wdt_set_timeout,
+	.restart	= mtk_wdt_restart,
+};
+
+static int mtk_wdt_probe(struct platform_device *pdev)
+{
+	struct mtk_wdt_dev *mtk_wdt;
+	struct resource *res;
+	int err;
+
+	mtk_wdt = devm_kzalloc(&pdev->dev, sizeof(*mtk_wdt), GFP_KERNEL);
+	if (!mtk_wdt)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, mtk_wdt);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mtk_wdt->wdt_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(mtk_wdt->wdt_base))
+		return PTR_ERR(mtk_wdt->wdt_base);
+
+	mtk_wdt->wdt_dev.info = &mtk_wdt_info;
+	mtk_wdt->wdt_dev.ops = &mtk_wdt_ops;
+	mtk_wdt->wdt_dev.timeout = WDT_MAX_TIMEOUT;
+	mtk_wdt->wdt_dev.max_timeout = WDT_MAX_TIMEOUT;
+	mtk_wdt->wdt_dev.min_timeout = WDT_MIN_TIMEOUT;
+	mtk_wdt->wdt_dev.parent = &pdev->dev;
+
+	watchdog_init_timeout(&mtk_wdt->wdt_dev, timeout, &pdev->dev);
+	watchdog_set_nowayout(&mtk_wdt->wdt_dev, nowayout);
+	watchdog_set_restart_priority(&mtk_wdt->wdt_dev, 128);
+
+	watchdog_set_drvdata(&mtk_wdt->wdt_dev, mtk_wdt);
+
+	mtk_wdt_stop(&mtk_wdt->wdt_dev);
+
+	err = watchdog_register_device(&mtk_wdt->wdt_dev);
+	if (unlikely(err))
+		return err;
+
+	dev_info(&pdev->dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n",
+			mtk_wdt->wdt_dev.timeout, nowayout);
+
+	return 0;
+}
+
+static void mtk_wdt_shutdown(struct platform_device *pdev)
+{
+	struct mtk_wdt_dev *mtk_wdt = platform_get_drvdata(pdev);
+
+	if (watchdog_active(&mtk_wdt->wdt_dev))
+		mtk_wdt_stop(&mtk_wdt->wdt_dev);
+}
+
+static int mtk_wdt_remove(struct platform_device *pdev)
+{
+	struct mtk_wdt_dev *mtk_wdt = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&mtk_wdt->wdt_dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mtk_wdt_suspend(struct device *dev)
+{
+	struct mtk_wdt_dev *mtk_wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&mtk_wdt->wdt_dev))
+		mtk_wdt_stop(&mtk_wdt->wdt_dev);
+
+	return 0;
+}
+
+static int mtk_wdt_resume(struct device *dev)
+{
+	struct mtk_wdt_dev *mtk_wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&mtk_wdt->wdt_dev)) {
+		mtk_wdt_start(&mtk_wdt->wdt_dev);
+		mtk_wdt_ping(&mtk_wdt->wdt_dev);
+	}
+
+	return 0;
+}
+#endif
+
+static const struct of_device_id mtk_wdt_dt_ids[] = {
+	{ .compatible = "mediatek,mt6589-wdt" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mtk_wdt_dt_ids);
+
+static const struct dev_pm_ops mtk_wdt_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(mtk_wdt_suspend,
+				mtk_wdt_resume)
+};
+
+static struct platform_driver mtk_wdt_driver = {
+	.probe		= mtk_wdt_probe,
+	.remove		= mtk_wdt_remove,
+	.shutdown	= mtk_wdt_shutdown,
+	.driver		= {
+		.name		= DRV_NAME,
+		.pm		= &mtk_wdt_pm_ops,
+		.of_match_table	= mtk_wdt_dt_ids,
+	},
+};
+
+module_platform_driver(mtk_wdt_driver);
+
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout, "Watchdog heartbeat in seconds");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+			__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Matthias Brugger <matthias.bgg@gmail.com>");
+MODULE_DESCRIPTION("Mediatek WatchDog Timer Driver");
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
new file mode 100644
index 000000000..1fa7d2b32
--- /dev/null
+++ b/drivers/watchdog/mtx-1_wdt.c
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *      Driver for the MTX-1 Watchdog.
+ *
+ *      (C) Copyright 2005 4G Systems <info@4g-systems.biz>,
+ *							All Rights Reserved.
+ *                              http://www.4g-systems.biz
+ *
+ *	(C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
+ *      (c) Copyright 2005    4G Systems <info@4g-systems.biz>
+ *
+ *      Release 0.01.
+ *      Author: Michael Stickel  michael.stickel@4g-systems.biz
+ *
+ *      Release 0.02.
+ *	Author: Florian Fainelli florian@openwrt.org
+ *		use the Linux watchdog/timer APIs
+ *
+ *      The Watchdog is configured to reset the MTX-1
+ *      if it is not triggered for 100 seconds.
+ *      It should not be triggered more often than 1.6 seconds.
+ *
+ *      A timer triggers the watchdog every 5 seconds, until
+ *      it is opened for the first time. After the first open
+ *      it MUST be triggered every 2..95 seconds.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/jiffies.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-au1x00/au1000.h>
+
+#define MTX1_WDT_INTERVAL	(5 * HZ)
+
+static int ticks = 100 * HZ;
+
+static struct {
+	struct completion stop;
+	spinlock_t lock;
+	int running;
+	struct timer_list timer;
+	int queue;
+	int default_ticks;
+	unsigned long inuse;
+	unsigned gpio;
+	unsigned int gstate;
+} mtx1_wdt_device;
+
+static void mtx1_wdt_trigger(struct timer_list *unused)
+{
+	spin_lock(&mtx1_wdt_device.lock);
+	if (mtx1_wdt_device.running)
+		ticks--;
+
+	/* toggle wdt gpio */
+	mtx1_wdt_device.gstate = !mtx1_wdt_device.gstate;
+	gpio_set_value(mtx1_wdt_device.gpio, mtx1_wdt_device.gstate);
+
+	if (mtx1_wdt_device.queue && ticks)
+		mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
+	else
+		complete(&mtx1_wdt_device.stop);
+	spin_unlock(&mtx1_wdt_device.lock);
+}
+
+static void mtx1_wdt_reset(void)
+{
+	ticks = mtx1_wdt_device.default_ticks;
+}
+
+
+static void mtx1_wdt_start(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
+	if (!mtx1_wdt_device.queue) {
+		mtx1_wdt_device.queue = 1;
+		mtx1_wdt_device.gstate = 1;
+		gpio_set_value(mtx1_wdt_device.gpio, 1);
+		mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
+	}
+	mtx1_wdt_device.running++;
+	spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags);
+}
+
+static int mtx1_wdt_stop(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
+	if (mtx1_wdt_device.queue) {
+		mtx1_wdt_device.queue = 0;
+		mtx1_wdt_device.gstate = 0;
+		gpio_set_value(mtx1_wdt_device.gpio, 0);
+	}
+	ticks = mtx1_wdt_device.default_ticks;
+	spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags);
+	return 0;
+}
+
+/* Filesystem functions */
+
+static int mtx1_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &mtx1_wdt_device.inuse))
+		return -EBUSY;
+	return nonseekable_open(inode, file);
+}
+
+
+static int mtx1_wdt_release(struct inode *inode, struct file *file)
+{
+	clear_bit(0, &mtx1_wdt_device.inuse);
+	return 0;
+}
+
+static long mtx1_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = (int __user *)argp;
+	unsigned int value;
+	static const struct watchdog_info ident = {
+		.options = WDIOF_CARDRESET,
+		.identity = "MTX-1 WDT",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		put_user(0, p);
+		break;
+	case WDIOC_SETOPTIONS:
+		if (get_user(value, p))
+			return -EFAULT;
+		if (value & WDIOS_ENABLECARD)
+			mtx1_wdt_start();
+		else if (value & WDIOS_DISABLECARD)
+			mtx1_wdt_stop();
+		else
+			return -EINVAL;
+		return 0;
+	case WDIOC_KEEPALIVE:
+		mtx1_wdt_reset();
+		break;
+	default:
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+
+static ssize_t mtx1_wdt_write(struct file *file, const char *buf,
+						size_t count, loff_t *ppos)
+{
+	if (!count)
+		return -EIO;
+	mtx1_wdt_reset();
+	return count;
+}
+
+static const struct file_operations mtx1_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.unlocked_ioctl	= mtx1_wdt_ioctl,
+	.open		= mtx1_wdt_open,
+	.write		= mtx1_wdt_write,
+	.release	= mtx1_wdt_release,
+};
+
+
+static struct miscdevice mtx1_wdt_misc = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &mtx1_wdt_fops,
+};
+
+
+static int mtx1_wdt_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	mtx1_wdt_device.gpio = pdev->resource[0].start;
+	ret = devm_gpio_request_one(&pdev->dev, mtx1_wdt_device.gpio,
+				GPIOF_OUT_INIT_HIGH, "mtx1-wdt");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to request gpio");
+		return ret;
+	}
+
+	spin_lock_init(&mtx1_wdt_device.lock);
+	init_completion(&mtx1_wdt_device.stop);
+	mtx1_wdt_device.queue = 0;
+	clear_bit(0, &mtx1_wdt_device.inuse);
+	timer_setup(&mtx1_wdt_device.timer, mtx1_wdt_trigger, 0);
+	mtx1_wdt_device.default_ticks = ticks;
+
+	ret = misc_register(&mtx1_wdt_misc);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to register\n");
+		return ret;
+	}
+	mtx1_wdt_start();
+	dev_info(&pdev->dev, "MTX-1 Watchdog driver\n");
+	return 0;
+}
+
+static int mtx1_wdt_remove(struct platform_device *pdev)
+{
+	/* FIXME: do we need to lock this test ? */
+	if (mtx1_wdt_device.queue) {
+		mtx1_wdt_device.queue = 0;
+		wait_for_completion(&mtx1_wdt_device.stop);
+	}
+
+	misc_deregister(&mtx1_wdt_misc);
+	return 0;
+}
+
+static struct platform_driver mtx1_wdt_driver = {
+	.probe = mtx1_wdt_probe,
+	.remove = mtx1_wdt_remove,
+	.driver.name = "mtx1-wdt",
+	.driver.owner = THIS_MODULE,
+};
+
+module_platform_driver(mtx1_wdt_driver);
+
+MODULE_AUTHOR("Michael Stickel, Florian Fainelli");
+MODULE_DESCRIPTION("Driver for the MTX-1 watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mtx1-wdt");
diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c
new file mode 100644
index 000000000..315275d7b
--- /dev/null
+++ b/drivers/watchdog/mv64x60_wdt.c
@@ -0,0 +1,325 @@
+/*
+ * mv64x60_wdt.c - MV64X60 (Marvell Discovery) watchdog userspace interface
+ *
+ * Author: James Chapman <jchapman@katalix.com>
+ *
+ * Platform-specific setup code should configure the dog to generate
+ * interrupt or reset as required.  This code only enables/disables
+ * and services the watchdog.
+ *
+ * Derived from mpc8xx_wdt.c, with the following copyright.
+ *
+ * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+#define MV64x60_WDT_WDC_OFFSET	0
+
+/*
+ * The watchdog configuration register contains a pair of 2-bit fields,
+ *   1.  a reload field, bits 27-26, which triggers a reload of
+ *       the countdown register, and
+ *   2.  an enable field, bits 25-24, which toggles between
+ *       enabling and disabling the watchdog timer.
+ * Bit 31 is a read-only field which indicates whether the
+ * watchdog timer is currently enabled.
+ *
+ * The low 24 bits contain the timer reload value.
+ */
+#define MV64x60_WDC_ENABLE_SHIFT	24
+#define MV64x60_WDC_SERVICE_SHIFT	26
+#define MV64x60_WDC_ENABLED_SHIFT	31
+
+#define MV64x60_WDC_ENABLED_TRUE	1
+#define MV64x60_WDC_ENABLED_FALSE	0
+
+/* Flags bits */
+#define MV64x60_WDOG_FLAG_OPENED	0
+
+static unsigned long wdt_flags;
+static int wdt_status;
+static void __iomem *mv64x60_wdt_regs;
+static int mv64x60_wdt_timeout;
+static int mv64x60_wdt_count;
+static unsigned int bus_clk;
+static char expect_close;
+static DEFINE_SPINLOCK(mv64x60_wdt_spinlock);
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int mv64x60_wdt_toggle_wdc(int enabled_predicate, int field_shift)
+{
+	u32 data;
+	u32 enabled;
+	int ret = 0;
+
+	spin_lock(&mv64x60_wdt_spinlock);
+	data = readl(mv64x60_wdt_regs + MV64x60_WDT_WDC_OFFSET);
+	enabled = (data >> MV64x60_WDC_ENABLED_SHIFT) & 1;
+
+	/* only toggle the requested field if enabled state matches predicate */
+	if ((enabled ^ enabled_predicate) == 0) {
+		/* We write a 1, then a 2 -- to the appropriate field */
+		data = (1 << field_shift) | mv64x60_wdt_count;
+		writel(data, mv64x60_wdt_regs + MV64x60_WDT_WDC_OFFSET);
+
+		data = (2 << field_shift) | mv64x60_wdt_count;
+		writel(data, mv64x60_wdt_regs + MV64x60_WDT_WDC_OFFSET);
+		ret = 1;
+	}
+	spin_unlock(&mv64x60_wdt_spinlock);
+
+	return ret;
+}
+
+static void mv64x60_wdt_service(void)
+{
+	mv64x60_wdt_toggle_wdc(MV64x60_WDC_ENABLED_TRUE,
+			       MV64x60_WDC_SERVICE_SHIFT);
+}
+
+static void mv64x60_wdt_handler_enable(void)
+{
+	if (mv64x60_wdt_toggle_wdc(MV64x60_WDC_ENABLED_FALSE,
+				   MV64x60_WDC_ENABLE_SHIFT)) {
+		mv64x60_wdt_service();
+		pr_notice("watchdog activated\n");
+	}
+}
+
+static void mv64x60_wdt_handler_disable(void)
+{
+	if (mv64x60_wdt_toggle_wdc(MV64x60_WDC_ENABLED_TRUE,
+				   MV64x60_WDC_ENABLE_SHIFT))
+		pr_notice("watchdog deactivated\n");
+}
+
+static void mv64x60_wdt_set_timeout(unsigned int timeout)
+{
+	/* maximum bus cycle count is 0xFFFFFFFF */
+	if (timeout > 0xFFFFFFFF / bus_clk)
+		timeout = 0xFFFFFFFF / bus_clk;
+
+	mv64x60_wdt_count = timeout * bus_clk >> 8;
+	mv64x60_wdt_timeout = timeout;
+}
+
+static int mv64x60_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(MV64x60_WDOG_FLAG_OPENED, &wdt_flags))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	mv64x60_wdt_handler_enable();
+
+	return nonseekable_open(inode, file);
+}
+
+static int mv64x60_wdt_release(struct inode *inode, struct file *file)
+{
+	if (expect_close == 42)
+		mv64x60_wdt_handler_disable();
+	else {
+		pr_crit("unexpected close, not stopping timer!\n");
+		mv64x60_wdt_service();
+	}
+	expect_close = 0;
+
+	clear_bit(MV64x60_WDOG_FLAG_OPENED, &wdt_flags);
+
+	return 0;
+}
+
+static ssize_t mv64x60_wdt_write(struct file *file, const char __user *data,
+				 size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			expect_close = 0;
+
+			for (i = 0; i != len; i++) {
+				char c;
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+		mv64x60_wdt_service();
+	}
+
+	return len;
+}
+
+static long mv64x60_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
+{
+	int timeout;
+	int options;
+	void __user *argp = (void __user *)arg;
+	static const struct watchdog_info info = {
+		.options =	WDIOF_SETTIMEOUT	|
+				WDIOF_MAGICCLOSE	|
+				WDIOF_KEEPALIVEPING,
+		.firmware_version = 0,
+		.identity = "MV64x60 watchdog",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &info, sizeof(info)))
+			return -EFAULT;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		if (put_user(wdt_status, (int __user *)argp))
+			return -EFAULT;
+		wdt_status &= ~WDIOF_KEEPALIVEPING;
+		break;
+
+	case WDIOC_GETTEMP:
+		return -EOPNOTSUPP;
+
+	case WDIOC_SETOPTIONS:
+		if (get_user(options, (int __user *)argp))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD)
+			mv64x60_wdt_handler_disable();
+
+		if (options & WDIOS_ENABLECARD)
+			mv64x60_wdt_handler_enable();
+		break;
+
+	case WDIOC_KEEPALIVE:
+		mv64x60_wdt_service();
+		wdt_status |= WDIOF_KEEPALIVEPING;
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(timeout, (int __user *)argp))
+			return -EFAULT;
+		mv64x60_wdt_set_timeout(timeout);
+		/* Fall through */
+
+	case WDIOC_GETTIMEOUT:
+		if (put_user(mv64x60_wdt_timeout, (int __user *)argp))
+			return -EFAULT;
+		break;
+
+	default:
+		return -ENOTTY;
+	}
+
+	return 0;
+}
+
+static const struct file_operations mv64x60_wdt_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = mv64x60_wdt_write,
+	.unlocked_ioctl = mv64x60_wdt_ioctl,
+	.open = mv64x60_wdt_open,
+	.release = mv64x60_wdt_release,
+};
+
+static struct miscdevice mv64x60_wdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &mv64x60_wdt_fops,
+};
+
+static int mv64x60_wdt_probe(struct platform_device *dev)
+{
+	struct mv64x60_wdt_pdata *pdata = dev_get_platdata(&dev->dev);
+	struct resource *r;
+	int timeout = 10;
+
+	bus_clk = 133;			/* in MHz */
+	if (pdata) {
+		timeout = pdata->timeout;
+		bus_clk = pdata->bus_clk;
+	}
+
+	/* Since bus_clk is truncated MHz, actual frequency could be
+	 * up to 1MHz higher.  Round up, since it's better to time out
+	 * too late than too soon.
+	 */
+	bus_clk++;
+	bus_clk *= 1000000;		/* convert to Hz */
+
+	r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!r)
+		return -ENODEV;
+
+	mv64x60_wdt_regs = devm_ioremap(&dev->dev, r->start, resource_size(r));
+	if (mv64x60_wdt_regs == NULL)
+		return -ENOMEM;
+
+	mv64x60_wdt_set_timeout(timeout);
+
+	mv64x60_wdt_handler_disable();	/* in case timer was already running */
+
+	return misc_register(&mv64x60_wdt_miscdev);
+}
+
+static int mv64x60_wdt_remove(struct platform_device *dev)
+{
+	misc_deregister(&mv64x60_wdt_miscdev);
+
+	mv64x60_wdt_handler_disable();
+
+	return 0;
+}
+
+static struct platform_driver mv64x60_wdt_driver = {
+	.probe = mv64x60_wdt_probe,
+	.remove = mv64x60_wdt_remove,
+	.driver = {
+		.name = MV64x60_WDT_NAME,
+	},
+};
+
+static int __init mv64x60_wdt_init(void)
+{
+	pr_info("MV64x60 watchdog driver\n");
+
+	return platform_driver_register(&mv64x60_wdt_driver);
+}
+
+static void __exit mv64x60_wdt_exit(void)
+{
+	platform_driver_unregister(&mv64x60_wdt_driver);
+}
+
+module_init(mv64x60_wdt_init);
+module_exit(mv64x60_wdt_exit);
+
+MODULE_AUTHOR("James Chapman <jchapman@katalix.com>");
+MODULE_DESCRIPTION("MV64x60 watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" MV64x60_WDT_NAME);
diff --git a/drivers/watchdog/ni903x_wdt.c b/drivers/watchdog/ni903x_wdt.c
new file mode 100644
index 000000000..dc67742e9
--- /dev/null
+++ b/drivers/watchdog/ni903x_wdt.c
@@ -0,0 +1,270 @@
+/*
+ * Copyright (C) 2016 National Instruments Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+
+#define NIWD_CONTROL	0x01
+#define NIWD_COUNTER2	0x02
+#define NIWD_COUNTER1	0x03
+#define NIWD_COUNTER0	0x04
+#define NIWD_SEED2	0x05
+#define NIWD_SEED1	0x06
+#define NIWD_SEED0	0x07
+
+#define NIWD_IO_SIZE	0x08
+
+#define NIWD_CONTROL_MODE		0x80
+#define NIWD_CONTROL_PROC_RESET		0x20
+#define NIWD_CONTROL_PET		0x10
+#define NIWD_CONTROL_RUNNING		0x08
+#define NIWD_CONTROL_CAPTURECOUNTER	0x04
+#define NIWD_CONTROL_RESET		0x02
+#define NIWD_CONTROL_ALARM		0x01
+
+#define NIWD_PERIOD_NS		30720
+#define NIWD_MIN_TIMEOUT	1
+#define NIWD_MAX_TIMEOUT	515
+#define NIWD_DEFAULT_TIMEOUT	60
+
+#define NIWD_NAME		"ni903x_wdt"
+
+struct ni903x_wdt {
+	struct device *dev;
+	u16 io_base;
+	struct watchdog_device wdd;
+};
+
+static unsigned int timeout;
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout,
+		 "Watchdog timeout in seconds. (default="
+		 __MODULE_STRING(NIWD_DEFAULT_TIMEOUT) ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, S_IRUGO);
+MODULE_PARM_DESC(nowayout,
+		 "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static void ni903x_start(struct ni903x_wdt *wdt)
+{
+	u8 control = inb(wdt->io_base + NIWD_CONTROL);
+
+	outb(control | NIWD_CONTROL_RESET, wdt->io_base + NIWD_CONTROL);
+	outb(control | NIWD_CONTROL_PET, wdt->io_base + NIWD_CONTROL);
+}
+
+static int ni903x_wdd_set_timeout(struct watchdog_device *wdd,
+				  unsigned int timeout)
+{
+	struct ni903x_wdt *wdt = watchdog_get_drvdata(wdd);
+	u32 counter = timeout * (1000000000 / NIWD_PERIOD_NS);
+
+	outb(((0x00FF0000 & counter) >> 16), wdt->io_base + NIWD_SEED2);
+	outb(((0x0000FF00 & counter) >> 8), wdt->io_base + NIWD_SEED1);
+	outb((0x000000FF & counter), wdt->io_base + NIWD_SEED0);
+
+	wdd->timeout = timeout;
+
+	return 0;
+}
+
+static unsigned int ni903x_wdd_get_timeleft(struct watchdog_device *wdd)
+{
+	struct ni903x_wdt *wdt = watchdog_get_drvdata(wdd);
+	u8 control, counter0, counter1, counter2;
+	u32 counter;
+
+	control = inb(wdt->io_base + NIWD_CONTROL);
+	control |= NIWD_CONTROL_CAPTURECOUNTER;
+	outb(control, wdt->io_base + NIWD_CONTROL);
+
+	counter2 = inb(wdt->io_base + NIWD_COUNTER2);
+	counter1 = inb(wdt->io_base + NIWD_COUNTER1);
+	counter0 = inb(wdt->io_base + NIWD_COUNTER0);
+
+	counter = (counter2 << 16) | (counter1 << 8) | counter0;
+
+	return counter / (1000000000 / NIWD_PERIOD_NS);
+}
+
+static int ni903x_wdd_ping(struct watchdog_device *wdd)
+{
+	struct ni903x_wdt *wdt = watchdog_get_drvdata(wdd);
+	u8 control;
+
+	control = inb(wdt->io_base + NIWD_CONTROL);
+	outb(control | NIWD_CONTROL_PET, wdt->io_base + NIWD_CONTROL);
+
+	return 0;
+}
+
+static int ni903x_wdd_start(struct watchdog_device *wdd)
+{
+	struct ni903x_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	outb(NIWD_CONTROL_RESET | NIWD_CONTROL_PROC_RESET,
+	     wdt->io_base + NIWD_CONTROL);
+
+	ni903x_wdd_set_timeout(wdd, wdd->timeout);
+	ni903x_start(wdt);
+
+	return 0;
+}
+
+static int ni903x_wdd_stop(struct watchdog_device *wdd)
+{
+	struct ni903x_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	outb(NIWD_CONTROL_RESET, wdt->io_base + NIWD_CONTROL);
+
+	return 0;
+}
+
+static acpi_status ni903x_resources(struct acpi_resource *res, void *data)
+{
+	struct ni903x_wdt *wdt = data;
+	u16 io_size;
+
+	switch (res->type) {
+	case ACPI_RESOURCE_TYPE_IO:
+		if (wdt->io_base != 0) {
+			dev_err(wdt->dev, "too many IO resources\n");
+			return AE_ERROR;
+		}
+
+		wdt->io_base = res->data.io.minimum;
+		io_size = res->data.io.address_length;
+
+		if (io_size < NIWD_IO_SIZE) {
+			dev_err(wdt->dev, "memory region too small\n");
+			return AE_ERROR;
+		}
+
+		if (!devm_request_region(wdt->dev, wdt->io_base, io_size,
+					 NIWD_NAME)) {
+			dev_err(wdt->dev, "failed to get memory region\n");
+			return AE_ERROR;
+		}
+
+		return AE_OK;
+
+	case ACPI_RESOURCE_TYPE_END_TAG:
+	default:
+		/* Ignore unsupported resources, e.g. IRQ */
+		return AE_OK;
+	}
+}
+
+static const struct watchdog_info ni903x_wdd_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "NI Watchdog",
+};
+
+static const struct watchdog_ops ni903x_wdd_ops = {
+	.owner = THIS_MODULE,
+	.start = ni903x_wdd_start,
+	.stop = ni903x_wdd_stop,
+	.ping = ni903x_wdd_ping,
+	.set_timeout = ni903x_wdd_set_timeout,
+	.get_timeleft = ni903x_wdd_get_timeleft,
+};
+
+static int ni903x_acpi_add(struct acpi_device *device)
+{
+	struct device *dev = &device->dev;
+	struct watchdog_device *wdd;
+	struct ni903x_wdt *wdt;
+	acpi_status status;
+	int ret;
+
+	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	device->driver_data = wdt;
+	wdt->dev = dev;
+
+	status = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+				     ni903x_resources, wdt);
+	if (ACPI_FAILURE(status) || wdt->io_base == 0) {
+		dev_err(dev, "failed to get resources\n");
+		return -ENODEV;
+	}
+
+	wdd = &wdt->wdd;
+	wdd->info = &ni903x_wdd_info;
+	wdd->ops = &ni903x_wdd_ops;
+	wdd->min_timeout = NIWD_MIN_TIMEOUT;
+	wdd->max_timeout = NIWD_MAX_TIMEOUT;
+	wdd->timeout = NIWD_DEFAULT_TIMEOUT;
+	wdd->parent = dev;
+	watchdog_set_drvdata(wdd, wdt);
+	watchdog_set_nowayout(wdd, nowayout);
+	ret = watchdog_init_timeout(wdd, timeout, dev);
+	if (ret)
+		dev_err(dev, "unable to set timeout value, using default\n");
+
+	ret = watchdog_register_device(wdd);
+	if (ret) {
+		dev_err(dev, "failed to register watchdog\n");
+		return ret;
+	}
+
+	/* Switch from boot mode to user mode */
+	outb(NIWD_CONTROL_RESET | NIWD_CONTROL_MODE,
+	     wdt->io_base + NIWD_CONTROL);
+
+	dev_dbg(dev, "io_base=0x%04X, timeout=%d, nowayout=%d\n",
+		wdt->io_base, timeout, nowayout);
+
+	return 0;
+}
+
+static int ni903x_acpi_remove(struct acpi_device *device)
+{
+	struct ni903x_wdt *wdt = acpi_driver_data(device);
+
+	ni903x_wdd_stop(&wdt->wdd);
+	watchdog_unregister_device(&wdt->wdd);
+
+	return 0;
+}
+
+static const struct acpi_device_id ni903x_device_ids[] = {
+	{"NIC775C", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, ni903x_device_ids);
+
+static struct acpi_driver ni903x_acpi_driver = {
+	.name = NIWD_NAME,
+	.ids = ni903x_device_ids,
+	.ops = {
+		.add = ni903x_acpi_add,
+		.remove = ni903x_acpi_remove,
+	},
+};
+
+module_acpi_driver(ni903x_acpi_driver);
+
+MODULE_DESCRIPTION("NI 903x Watchdog");
+MODULE_AUTHOR("Jeff Westfahl <jeff.westfahl@ni.com>");
+MODULE_AUTHOR("Kyle Roeschley <kyle.roeschley@ni.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/nic7018_wdt.c b/drivers/watchdog/nic7018_wdt.c
new file mode 100644
index 000000000..dcd265685
--- /dev/null
+++ b/drivers/watchdog/nic7018_wdt.c
@@ -0,0 +1,265 @@
+/*
+ * Copyright (C) 2016 National Instruments Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/acpi.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define LOCK			0xA5
+#define UNLOCK			0x5A
+
+#define WDT_CTRL_RESET_EN	BIT(7)
+#define WDT_RELOAD_PORT_EN	BIT(7)
+
+#define WDT_CTRL		1
+#define WDT_RELOAD_CTRL		2
+#define WDT_PRESET_PRESCALE	4
+#define WDT_REG_LOCK		5
+#define WDT_COUNT		6
+#define WDT_RELOAD_PORT		7
+
+#define WDT_MIN_TIMEOUT		1
+#define WDT_MAX_TIMEOUT		464
+#define WDT_DEFAULT_TIMEOUT	80
+
+#define WDT_MAX_COUNTER		15
+
+static unsigned int timeout;
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout,
+		 "Watchdog timeout in seconds. (default="
+		 __MODULE_STRING(WDT_DEFAULT_TIMEOUT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		 "Watchdog cannot be stopped once started. (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct nic7018_wdt {
+	u16 io_base;
+	u32 period;
+	struct watchdog_device wdd;
+};
+
+struct nic7018_config {
+	u32 period;
+	u8 divider;
+};
+
+static const struct nic7018_config nic7018_configs[] = {
+	{  2, 4 },
+	{ 32, 5 },
+};
+
+static inline u32 nic7018_timeout(u32 period, u8 counter)
+{
+	return period * counter - period / 2;
+}
+
+static const struct nic7018_config *nic7018_get_config(u32 timeout,
+						       u8 *counter)
+{
+	const struct nic7018_config *config;
+	u8 count;
+
+	if (timeout < 30 && timeout != 16) {
+		config = &nic7018_configs[0];
+		count = timeout / 2 + 1;
+	} else {
+		config = &nic7018_configs[1];
+		count = DIV_ROUND_UP(timeout + 16, 32);
+
+		if (count > WDT_MAX_COUNTER)
+			count = WDT_MAX_COUNTER;
+	}
+	*counter = count;
+	return config;
+}
+
+static int nic7018_set_timeout(struct watchdog_device *wdd,
+			       unsigned int timeout)
+{
+	struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd);
+	const struct nic7018_config *config;
+	u8 counter;
+
+	config = nic7018_get_config(timeout, &counter);
+
+	outb(counter << 4 | config->divider,
+	     wdt->io_base + WDT_PRESET_PRESCALE);
+
+	wdd->timeout = nic7018_timeout(config->period, counter);
+	wdt->period = config->period;
+
+	return 0;
+}
+
+static int nic7018_start(struct watchdog_device *wdd)
+{
+	struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd);
+	u8 control;
+
+	nic7018_set_timeout(wdd, wdd->timeout);
+
+	control = inb(wdt->io_base + WDT_RELOAD_CTRL);
+	outb(control | WDT_RELOAD_PORT_EN, wdt->io_base + WDT_RELOAD_CTRL);
+
+	outb(1, wdt->io_base + WDT_RELOAD_PORT);
+
+	control = inb(wdt->io_base + WDT_CTRL);
+	outb(control | WDT_CTRL_RESET_EN, wdt->io_base + WDT_CTRL);
+
+	return 0;
+}
+
+static int nic7018_stop(struct watchdog_device *wdd)
+{
+	struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	outb(0, wdt->io_base + WDT_CTRL);
+	outb(0, wdt->io_base + WDT_RELOAD_CTRL);
+	outb(0xF0, wdt->io_base + WDT_PRESET_PRESCALE);
+
+	return 0;
+}
+
+static int nic7018_ping(struct watchdog_device *wdd)
+{
+	struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	outb(1, wdt->io_base + WDT_RELOAD_PORT);
+
+	return 0;
+}
+
+static unsigned int nic7018_get_timeleft(struct watchdog_device *wdd)
+{
+	struct nic7018_wdt *wdt = watchdog_get_drvdata(wdd);
+	u8 count;
+
+	count = inb(wdt->io_base + WDT_COUNT) & 0xF;
+	if (!count)
+		return 0;
+
+	return nic7018_timeout(wdt->period, count);
+}
+
+static const struct watchdog_info nic7018_wdd_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "NIC7018 Watchdog",
+};
+
+static const struct watchdog_ops nic7018_wdd_ops = {
+	.owner = THIS_MODULE,
+	.start = nic7018_start,
+	.stop = nic7018_stop,
+	.ping = nic7018_ping,
+	.set_timeout = nic7018_set_timeout,
+	.get_timeleft = nic7018_get_timeleft,
+};
+
+static int nic7018_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct watchdog_device *wdd;
+	struct nic7018_wdt *wdt;
+	struct resource *io_rc;
+	int ret;
+
+	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, wdt);
+
+	io_rc = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!io_rc) {
+		dev_err(dev, "missing IO resources\n");
+		return -EINVAL;
+	}
+
+	if (!devm_request_region(dev, io_rc->start, resource_size(io_rc),
+				 KBUILD_MODNAME)) {
+		dev_err(dev, "failed to get IO region\n");
+		return -EBUSY;
+	}
+
+	wdt->io_base = io_rc->start;
+	wdd = &wdt->wdd;
+	wdd->info = &nic7018_wdd_info;
+	wdd->ops = &nic7018_wdd_ops;
+	wdd->min_timeout = WDT_MIN_TIMEOUT;
+	wdd->max_timeout = WDT_MAX_TIMEOUT;
+	wdd->timeout = WDT_DEFAULT_TIMEOUT;
+	wdd->parent = dev;
+
+	watchdog_set_drvdata(wdd, wdt);
+	watchdog_set_nowayout(wdd, nowayout);
+
+	ret = watchdog_init_timeout(wdd, timeout, dev);
+	if (ret)
+		dev_warn(dev, "unable to set timeout value, using default\n");
+
+	/* Unlock WDT register */
+	outb(UNLOCK, wdt->io_base + WDT_REG_LOCK);
+
+	ret = watchdog_register_device(wdd);
+	if (ret) {
+		outb(LOCK, wdt->io_base + WDT_REG_LOCK);
+		dev_err(dev, "failed to register watchdog\n");
+		return ret;
+	}
+
+	dev_dbg(dev, "io_base=0x%04X, timeout=%d, nowayout=%d\n",
+		wdt->io_base, timeout, nowayout);
+	return 0;
+}
+
+static int nic7018_remove(struct platform_device *pdev)
+{
+	struct nic7018_wdt *wdt = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&wdt->wdd);
+
+	/* Lock WDT register */
+	outb(LOCK, wdt->io_base + WDT_REG_LOCK);
+
+	return 0;
+}
+
+static const struct acpi_device_id nic7018_device_ids[] = {
+	{"NIC7018", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, nic7018_device_ids);
+
+static struct platform_driver watchdog_driver = {
+	.probe = nic7018_probe,
+	.remove = nic7018_remove,
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.acpi_match_table = ACPI_PTR(nic7018_device_ids),
+	},
+};
+
+module_platform_driver(watchdog_driver);
+
+MODULE_DESCRIPTION("National Instruments NIC7018 Watchdog driver");
+MODULE_AUTHOR("Hui Chun Ong <hui.chun.ong@ni.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/npcm_wdt.c b/drivers/watchdog/npcm_wdt.c
new file mode 100644
index 000000000..0d4213652
--- /dev/null
+++ b/drivers/watchdog/npcm_wdt.c
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Nuvoton Technology corporation.
+// Copyright (c) 2018 IBM Corp.
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/watchdog.h>
+
+#define NPCM_WTCR	0x1C
+
+#define NPCM_WTCLK	(BIT(10) | BIT(11))	/* Clock divider */
+#define NPCM_WTE	BIT(7)			/* Enable */
+#define NPCM_WTIE	BIT(6)			/* Enable irq */
+#define NPCM_WTIS	(BIT(4) | BIT(5))	/* Interval selection */
+#define NPCM_WTIF	BIT(3)			/* Interrupt flag*/
+#define NPCM_WTRF	BIT(2)			/* Reset flag */
+#define NPCM_WTRE	BIT(1)			/* Reset enable */
+#define NPCM_WTR	BIT(0)			/* Reset counter */
+
+/*
+ * Watchdog timeouts
+ *
+ * 170     msec:    WTCLK=01 WTIS=00     VAL= 0x400
+ * 670     msec:    WTCLK=01 WTIS=01     VAL= 0x410
+ * 1360    msec:    WTCLK=10 WTIS=00     VAL= 0x800
+ * 2700    msec:    WTCLK=01 WTIS=10     VAL= 0x420
+ * 5360    msec:    WTCLK=10 WTIS=01     VAL= 0x810
+ * 10700   msec:    WTCLK=01 WTIS=11     VAL= 0x430
+ * 21600   msec:    WTCLK=10 WTIS=10     VAL= 0x820
+ * 43000   msec:    WTCLK=11 WTIS=00     VAL= 0xC00
+ * 85600   msec:    WTCLK=10 WTIS=11     VAL= 0x830
+ * 172000  msec:    WTCLK=11 WTIS=01     VAL= 0xC10
+ * 687000  msec:    WTCLK=11 WTIS=10     VAL= 0xC20
+ * 2750000 msec:    WTCLK=11 WTIS=11     VAL= 0xC30
+ */
+
+struct npcm_wdt {
+	struct watchdog_device  wdd;
+	void __iomem		*reg;
+};
+
+static inline struct npcm_wdt *to_npcm_wdt(struct watchdog_device *wdd)
+{
+	return container_of(wdd, struct npcm_wdt, wdd);
+}
+
+static int npcm_wdt_ping(struct watchdog_device *wdd)
+{
+	struct npcm_wdt *wdt = to_npcm_wdt(wdd);
+	u32 val;
+
+	val = readl(wdt->reg);
+	writel(val | NPCM_WTR, wdt->reg);
+
+	return 0;
+}
+
+static int npcm_wdt_start(struct watchdog_device *wdd)
+{
+	struct npcm_wdt *wdt = to_npcm_wdt(wdd);
+	u32 val;
+
+	if (wdd->timeout < 2)
+		val = 0x800;
+	else if (wdd->timeout < 3)
+		val = 0x420;
+	else if (wdd->timeout < 6)
+		val = 0x810;
+	else if (wdd->timeout < 11)
+		val = 0x430;
+	else if (wdd->timeout < 22)
+		val = 0x820;
+	else if (wdd->timeout < 44)
+		val = 0xC00;
+	else if (wdd->timeout < 87)
+		val = 0x830;
+	else if (wdd->timeout < 173)
+		val = 0xC10;
+	else if (wdd->timeout < 688)
+		val = 0xC20;
+	else
+		val = 0xC30;
+
+	val |= NPCM_WTRE | NPCM_WTE | NPCM_WTR | NPCM_WTIE;
+
+	writel(val, wdt->reg);
+
+	return 0;
+}
+
+static int npcm_wdt_stop(struct watchdog_device *wdd)
+{
+	struct npcm_wdt *wdt = to_npcm_wdt(wdd);
+
+	writel(0, wdt->reg);
+
+	return 0;
+}
+
+
+static int npcm_wdt_set_timeout(struct watchdog_device *wdd,
+				unsigned int timeout)
+{
+	if (timeout < 2)
+		wdd->timeout = 1;
+	else if (timeout < 3)
+	      wdd->timeout = 2;
+	else if (timeout < 6)
+	      wdd->timeout = 5;
+	else if (timeout < 11)
+	      wdd->timeout = 10;
+	else if (timeout < 22)
+	      wdd->timeout = 21;
+	else if (timeout < 44)
+	      wdd->timeout = 43;
+	else if (timeout < 87)
+	      wdd->timeout = 86;
+	else if (timeout < 173)
+	      wdd->timeout = 172;
+	else if (timeout < 688)
+	      wdd->timeout = 687;
+	else
+	      wdd->timeout = 2750;
+
+	if (watchdog_active(wdd))
+		npcm_wdt_start(wdd);
+
+	return 0;
+}
+
+static irqreturn_t npcm_wdt_interrupt(int irq, void *data)
+{
+	struct npcm_wdt *wdt = data;
+
+	watchdog_notify_pretimeout(&wdt->wdd);
+
+	return IRQ_HANDLED;
+}
+
+static int npcm_wdt_restart(struct watchdog_device *wdd,
+			    unsigned long action, void *data)
+{
+	struct npcm_wdt *wdt = to_npcm_wdt(wdd);
+
+	writel(NPCM_WTR | NPCM_WTRE | NPCM_WTE, wdt->reg);
+	udelay(1000);
+
+	return 0;
+}
+
+static bool npcm_is_running(struct watchdog_device *wdd)
+{
+	struct npcm_wdt *wdt = to_npcm_wdt(wdd);
+
+	return readl(wdt->reg) & NPCM_WTE;
+}
+
+static const struct watchdog_info npcm_wdt_info = {
+	.identity	= KBUILD_MODNAME,
+	.options	= WDIOF_SETTIMEOUT
+			| WDIOF_KEEPALIVEPING
+			| WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops npcm_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = npcm_wdt_start,
+	.stop = npcm_wdt_stop,
+	.ping = npcm_wdt_ping,
+	.set_timeout = npcm_wdt_set_timeout,
+	.restart = npcm_wdt_restart,
+};
+
+static int npcm_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct npcm_wdt *wdt;
+	struct resource *res;
+	int irq;
+	int ret;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->reg = devm_ioremap_resource(dev, res);
+	if (IS_ERR(wdt->reg))
+		return PTR_ERR(wdt->reg);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	wdt->wdd.info = &npcm_wdt_info;
+	wdt->wdd.ops = &npcm_wdt_ops;
+	wdt->wdd.min_timeout = 1;
+	wdt->wdd.max_timeout = 2750;
+	wdt->wdd.parent = dev;
+
+	wdt->wdd.timeout = 86;
+	watchdog_init_timeout(&wdt->wdd, 0, dev);
+
+	/* Ensure timeout is able to be represented by the hardware */
+	npcm_wdt_set_timeout(&wdt->wdd, wdt->wdd.timeout);
+
+	if (npcm_is_running(&wdt->wdd)) {
+		/* Restart with the default or device-tree specified timeout */
+		npcm_wdt_start(&wdt->wdd);
+		set_bit(WDOG_HW_RUNNING, &wdt->wdd.status);
+	}
+
+	ret = devm_request_irq(dev, irq, npcm_wdt_interrupt, 0,
+			       "watchdog", wdt);
+	if (ret)
+		return ret;
+
+	ret = devm_watchdog_register_device(dev, &wdt->wdd);
+	if (ret) {
+		dev_err(dev, "failed to register watchdog\n");
+		return ret;
+	}
+
+	dev_info(dev, "NPCM watchdog driver enabled\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id npcm_wdt_match[] = {
+	{.compatible = "nuvoton,npcm750-wdt"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, npcm_wdt_match);
+#endif
+
+static struct platform_driver npcm_wdt_driver = {
+	.probe		= npcm_wdt_probe,
+	.driver		= {
+		.name	= "npcm-wdt",
+		.of_match_table = of_match_ptr(npcm_wdt_match),
+	},
+};
+module_platform_driver(npcm_wdt_driver);
+
+MODULE_AUTHOR("Joel Stanley");
+MODULE_DESCRIPTION("Watchdog driver for NPCM");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/watchdog/nuc900_wdt.c b/drivers/watchdog/nuc900_wdt.c
new file mode 100644
index 000000000..830bd04ff
--- /dev/null
+++ b/drivers/watchdog/nuc900_wdt.c
@@ -0,0 +1,308 @@
+/*
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <linux/uaccess.h>
+
+#define REG_WTCR		0x1c
+#define WTCLK			(0x01 << 10)
+#define WTE			(0x01 << 7)	/*wdt enable*/
+#define WTIS			(0x03 << 4)
+#define WTIF			(0x01 << 3)
+#define WTRF			(0x01 << 2)
+#define WTRE			(0x01 << 1)
+#define WTR			(0x01 << 0)
+/*
+ * The watchdog time interval can be calculated via following formula:
+ * WTIS		real time interval (formula)
+ * 0x00		((2^ 14 ) * ((external crystal freq) / 256))seconds
+ * 0x01		((2^ 16 ) * ((external crystal freq) / 256))seconds
+ * 0x02		((2^ 18 ) * ((external crystal freq) / 256))seconds
+ * 0x03		((2^ 20 ) * ((external crystal freq) / 256))seconds
+ *
+ * The external crystal freq is 15Mhz in the nuc900 evaluation board.
+ * So 0x00 = +-0.28 seconds, 0x01 = +-1.12 seconds, 0x02 = +-4.48 seconds,
+ * 0x03 = +- 16.92 seconds..
+ */
+#define WDT_HW_TIMEOUT		0x02
+#define WDT_TIMEOUT		(HZ/2)
+#define WDT_HEARTBEAT		15
+
+static int heartbeat = WDT_HEARTBEAT;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
+	"(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+	"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct nuc900_wdt {
+	struct clk	 *wdt_clock;
+	struct platform_device *pdev;
+	void __iomem	 *wdt_base;
+	char		 expect_close;
+	struct timer_list timer;
+	spinlock_t       wdt_lock;
+	unsigned long next_heartbeat;
+};
+
+static unsigned long nuc900wdt_busy;
+static struct nuc900_wdt *nuc900_wdt;
+
+static inline void nuc900_wdt_keepalive(void)
+{
+	unsigned int val;
+
+	spin_lock(&nuc900_wdt->wdt_lock);
+
+	val = __raw_readl(nuc900_wdt->wdt_base + REG_WTCR);
+	val |= (WTR | WTIF);
+	__raw_writel(val, nuc900_wdt->wdt_base + REG_WTCR);
+
+	spin_unlock(&nuc900_wdt->wdt_lock);
+}
+
+static inline void nuc900_wdt_start(void)
+{
+	unsigned int val;
+
+	spin_lock(&nuc900_wdt->wdt_lock);
+
+	val = __raw_readl(nuc900_wdt->wdt_base + REG_WTCR);
+	val |= (WTRE | WTE | WTR | WTCLK | WTIF);
+	val &= ~WTIS;
+	val |= (WDT_HW_TIMEOUT << 0x04);
+	__raw_writel(val, nuc900_wdt->wdt_base + REG_WTCR);
+
+	spin_unlock(&nuc900_wdt->wdt_lock);
+
+	nuc900_wdt->next_heartbeat = jiffies + heartbeat * HZ;
+	mod_timer(&nuc900_wdt->timer, jiffies + WDT_TIMEOUT);
+}
+
+static inline void nuc900_wdt_stop(void)
+{
+	unsigned int val;
+
+	del_timer(&nuc900_wdt->timer);
+
+	spin_lock(&nuc900_wdt->wdt_lock);
+
+	val = __raw_readl(nuc900_wdt->wdt_base + REG_WTCR);
+	val &= ~WTE;
+	__raw_writel(val, nuc900_wdt->wdt_base + REG_WTCR);
+
+	spin_unlock(&nuc900_wdt->wdt_lock);
+}
+
+static inline void nuc900_wdt_ping(void)
+{
+	nuc900_wdt->next_heartbeat = jiffies + heartbeat * HZ;
+}
+
+static int nuc900_wdt_open(struct inode *inode, struct file *file)
+{
+
+	if (test_and_set_bit(0, &nuc900wdt_busy))
+		return -EBUSY;
+
+	nuc900_wdt_start();
+
+	return nonseekable_open(inode, file);
+}
+
+static int nuc900_wdt_close(struct inode *inode, struct file *file)
+{
+	if (nuc900_wdt->expect_close == 42)
+		nuc900_wdt_stop();
+	else {
+		dev_crit(&nuc900_wdt->pdev->dev,
+			"Unexpected close, not stopping watchdog!\n");
+		nuc900_wdt_ping();
+	}
+
+	nuc900_wdt->expect_close = 0;
+	clear_bit(0, &nuc900wdt_busy);
+	return 0;
+}
+
+static const struct watchdog_info nuc900_wdt_info = {
+	.identity	= "nuc900 watchdog",
+	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+						WDIOF_MAGICCLOSE,
+};
+
+static long nuc900_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int new_value;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &nuc900_wdt_info,
+				sizeof(nuc900_wdt_info)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_KEEPALIVE:
+		nuc900_wdt_ping();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_value, p))
+			return -EFAULT;
+
+		heartbeat = new_value;
+		nuc900_wdt_ping();
+
+		return put_user(new_value, p);
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static ssize_t nuc900_wdt_write(struct file *file, const char __user *data,
+						size_t len, loff_t *ppos)
+{
+	if (!len)
+		return 0;
+
+	/* Scan for magic character */
+	if (!nowayout) {
+		size_t i;
+
+		nuc900_wdt->expect_close = 0;
+
+		for (i = 0; i < len; i++) {
+			char c;
+			if (get_user(c, data + i))
+				return -EFAULT;
+			if (c == 'V') {
+				nuc900_wdt->expect_close = 42;
+				break;
+			}
+		}
+	}
+
+	nuc900_wdt_ping();
+	return len;
+}
+
+static void nuc900_wdt_timer_ping(struct timer_list *unused)
+{
+	if (time_before(jiffies, nuc900_wdt->next_heartbeat)) {
+		nuc900_wdt_keepalive();
+		mod_timer(&nuc900_wdt->timer, jiffies + WDT_TIMEOUT);
+	} else
+		dev_warn(&nuc900_wdt->pdev->dev, "Will reset the machine !\n");
+}
+
+static const struct file_operations nuc900wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.unlocked_ioctl	= nuc900_wdt_ioctl,
+	.open		= nuc900_wdt_open,
+	.release	= nuc900_wdt_close,
+	.write		= nuc900_wdt_write,
+};
+
+static struct miscdevice nuc900wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &nuc900wdt_fops,
+};
+
+static int nuc900wdt_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	int ret = 0;
+
+	nuc900_wdt = devm_kzalloc(&pdev->dev, sizeof(*nuc900_wdt),
+				GFP_KERNEL);
+	if (!nuc900_wdt)
+		return -ENOMEM;
+
+	nuc900_wdt->pdev = pdev;
+
+	spin_lock_init(&nuc900_wdt->wdt_lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	nuc900_wdt->wdt_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(nuc900_wdt->wdt_base))
+		return PTR_ERR(nuc900_wdt->wdt_base);
+
+	nuc900_wdt->wdt_clock = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(nuc900_wdt->wdt_clock)) {
+		dev_err(&pdev->dev, "failed to find watchdog clock source\n");
+		return PTR_ERR(nuc900_wdt->wdt_clock);
+	}
+
+	clk_enable(nuc900_wdt->wdt_clock);
+
+	timer_setup(&nuc900_wdt->timer, nuc900_wdt_timer_ping, 0);
+
+	ret = misc_register(&nuc900wdt_miscdev);
+	if (ret) {
+		dev_err(&pdev->dev, "err register miscdev on minor=%d (%d)\n",
+			WATCHDOG_MINOR, ret);
+		goto err_clk;
+	}
+
+	return 0;
+
+err_clk:
+	clk_disable(nuc900_wdt->wdt_clock);
+	return ret;
+}
+
+static int nuc900wdt_remove(struct platform_device *pdev)
+{
+	misc_deregister(&nuc900wdt_miscdev);
+
+	clk_disable(nuc900_wdt->wdt_clock);
+
+	return 0;
+}
+
+static struct platform_driver nuc900wdt_driver = {
+	.probe		= nuc900wdt_probe,
+	.remove		= nuc900wdt_remove,
+	.driver		= {
+		.name	= "nuc900-wdt",
+	},
+};
+
+module_platform_driver(nuc900wdt_driver);
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("Watchdog driver for NUC900");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:nuc900-wdt");
diff --git a/drivers/watchdog/nv_tco.c b/drivers/watchdog/nv_tco.c
new file mode 100644
index 000000000..a0fabf6f9
--- /dev/null
+++ b/drivers/watchdog/nv_tco.c
@@ -0,0 +1,518 @@
+/*
+ *	nv_tco 0.01:	TCO timer driver for NV chipsets
+ *
+ *	(c) Copyright 2005 Google Inc., All Rights Reserved.
+ *
+ *	Based off i8xx_tco.c:
+ *	(c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights
+ *	Reserved.
+ *				http://www.kernelconcepts.de
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	TCO timer driver for NV chipsets
+ *	based on softdog.c by Alan Cox <alan@redhat.com>
+ */
+
+/*
+ *	Includes, defines, variables, module parameters, ...
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+#include "nv_tco.h"
+
+/* Module and version information */
+#define TCO_VERSION "0.01"
+#define TCO_MODULE_NAME "NV_TCO"
+#define TCO_DRIVER_NAME   TCO_MODULE_NAME ", v" TCO_VERSION
+
+/* internal variables */
+static unsigned int tcobase;
+static DEFINE_SPINLOCK(tco_lock);	/* Guards the hardware */
+static unsigned long timer_alive;
+static char tco_expect_close;
+static struct pci_dev *tco_pci;
+
+/* the watchdog platform device */
+static struct platform_device *nv_tco_platform_device;
+
+/* module parameters */
+#define WATCHDOG_HEARTBEAT 30	/* 30 sec default heartbeat (2<heartbeat<39) */
+static int heartbeat = WATCHDOG_HEARTBEAT;  /* in seconds */
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<heartbeat<39, "
+			    "default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"
+		" (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/*
+ * Some TCO specific functions
+ */
+static inline unsigned char seconds_to_ticks(int seconds)
+{
+	/* the internal timer is stored as ticks which decrement
+	 * every 0.6 seconds */
+	return (seconds * 10) / 6;
+}
+
+static void tco_timer_start(void)
+{
+	u32 val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tco_lock, flags);
+	val = inl(TCO_CNT(tcobase));
+	val &= ~TCO_CNT_TCOHALT;
+	outl(val, TCO_CNT(tcobase));
+	spin_unlock_irqrestore(&tco_lock, flags);
+}
+
+static void tco_timer_stop(void)
+{
+	u32 val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tco_lock, flags);
+	val = inl(TCO_CNT(tcobase));
+	val |= TCO_CNT_TCOHALT;
+	outl(val, TCO_CNT(tcobase));
+	spin_unlock_irqrestore(&tco_lock, flags);
+}
+
+static void tco_timer_keepalive(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&tco_lock, flags);
+	outb(0x01, TCO_RLD(tcobase));
+	spin_unlock_irqrestore(&tco_lock, flags);
+}
+
+static int tco_timer_set_heartbeat(int t)
+{
+	int ret = 0;
+	unsigned char tmrval;
+	unsigned long flags;
+	u8 val;
+
+	/*
+	 * note seconds_to_ticks(t) > t, so if t > 0x3f, so is
+	 * tmrval=seconds_to_ticks(t).  Check that the count in seconds isn't
+	 * out of range on it's own (to avoid overflow in tmrval).
+	 */
+	if (t < 0 || t > 0x3f)
+		return -EINVAL;
+	tmrval = seconds_to_ticks(t);
+
+	/* "Values of 0h-3h are ignored and should not be attempted" */
+	if (tmrval > 0x3f || tmrval < 0x04)
+		return -EINVAL;
+
+	/* Write new heartbeat to watchdog */
+	spin_lock_irqsave(&tco_lock, flags);
+	val = inb(TCO_TMR(tcobase));
+	val &= 0xc0;
+	val |= tmrval;
+	outb(val, TCO_TMR(tcobase));
+	val = inb(TCO_TMR(tcobase));
+
+	if ((val & 0x3f) != tmrval)
+		ret = -EINVAL;
+	spin_unlock_irqrestore(&tco_lock, flags);
+
+	if (ret)
+		return ret;
+
+	heartbeat = t;
+	return 0;
+}
+
+/*
+ *	/dev/watchdog handling
+ */
+
+static int nv_tco_open(struct inode *inode, struct file *file)
+{
+	/* /dev/watchdog can only be opened once */
+	if (test_and_set_bit(0, &timer_alive))
+		return -EBUSY;
+
+	/* Reload and activate timer */
+	tco_timer_keepalive();
+	tco_timer_start();
+	return nonseekable_open(inode, file);
+}
+
+static int nv_tco_release(struct inode *inode, struct file *file)
+{
+	/* Shut off the timer */
+	if (tco_expect_close == 42) {
+		tco_timer_stop();
+	} else {
+		pr_crit("Unexpected close, not stopping watchdog!\n");
+		tco_timer_keepalive();
+	}
+	clear_bit(0, &timer_alive);
+	tco_expect_close = 0;
+	return 0;
+}
+
+static ssize_t nv_tco_write(struct file *file, const char __user *data,
+			    size_t len, loff_t *ppos)
+{
+	/* See if we got the magic character 'V' and reload the timer */
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			/*
+			 * note: just in case someone wrote the magic character
+			 * five months ago...
+			 */
+			tco_expect_close = 0;
+
+			/*
+			 * scan to see whether or not we got the magic
+			 * character
+			 */
+			for (i = 0; i != len; i++) {
+				char c;
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					tco_expect_close = 42;
+			}
+		}
+
+		/* someone wrote to us, we should reload the timer */
+		tco_timer_keepalive();
+	}
+	return len;
+}
+
+static long nv_tco_ioctl(struct file *file, unsigned int cmd,
+			 unsigned long arg)
+{
+	int new_options, retval = -EINVAL;
+	int new_heartbeat;
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static const struct watchdog_info ident = {
+		.options =		WDIOF_SETTIMEOUT |
+					WDIOF_KEEPALIVEPING |
+					WDIOF_MAGICCLOSE,
+		.firmware_version =	0,
+		.identity =		TCO_MODULE_NAME,
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+		if (get_user(new_options, p))
+			return -EFAULT;
+		if (new_options & WDIOS_DISABLECARD) {
+			tco_timer_stop();
+			retval = 0;
+		}
+		if (new_options & WDIOS_ENABLECARD) {
+			tco_timer_keepalive();
+			tco_timer_start();
+			retval = 0;
+		}
+		return retval;
+	case WDIOC_KEEPALIVE:
+		tco_timer_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_heartbeat, p))
+			return -EFAULT;
+		if (tco_timer_set_heartbeat(new_heartbeat))
+			return -EINVAL;
+		tco_timer_keepalive();
+		/* Fall through */
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+	default:
+		return -ENOTTY;
+	}
+}
+
+/*
+ *	Kernel Interfaces
+ */
+
+static const struct file_operations nv_tco_fops = {
+	.owner =		THIS_MODULE,
+	.llseek =		no_llseek,
+	.write =		nv_tco_write,
+	.unlocked_ioctl =	nv_tco_ioctl,
+	.open =			nv_tco_open,
+	.release =		nv_tco_release,
+};
+
+static struct miscdevice nv_tco_miscdev = {
+	.minor =	WATCHDOG_MINOR,
+	.name =		"watchdog",
+	.fops =		&nv_tco_fops,
+};
+
+/*
+ * Data for PCI driver interface
+ *
+ * This data only exists for exporting the supported
+ * PCI ids via MODULE_DEVICE_TABLE.  We do not actually
+ * register a pci_driver, because someone else might one day
+ * want to register another driver on the same PCI id.
+ */
+static const struct pci_device_id tco_pci_tbl[] = {
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS,
+	  PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS,
+	  PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP78S_SMBUS,
+	  PCI_ANY_ID, PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS,
+	  PCI_ANY_ID, PCI_ANY_ID, },
+	{ 0, },			/* End of list */
+};
+MODULE_DEVICE_TABLE(pci, tco_pci_tbl);
+
+/*
+ *	Init & exit routines
+ */
+
+static unsigned char nv_tco_getdevice(void)
+{
+	struct pci_dev *dev = NULL;
+	u32 val;
+
+	/* Find the PCI device */
+	for_each_pci_dev(dev) {
+		if (pci_match_id(tco_pci_tbl, dev) != NULL) {
+			tco_pci = dev;
+			break;
+		}
+	}
+
+	if (!tco_pci)
+		return 0;
+
+	/* Find the base io port */
+	pci_read_config_dword(tco_pci, 0x64, &val);
+	val &= 0xffff;
+	if (val == 0x0001 || val == 0x0000) {
+		/* Something is wrong here, bar isn't setup */
+		pr_err("failed to get tcobase address\n");
+		return 0;
+	}
+	val &= 0xff00;
+	tcobase = val + 0x40;
+
+	if (!request_region(tcobase, 0x10, "NV TCO")) {
+		pr_err("I/O address 0x%04x already in use\n", tcobase);
+		return 0;
+	}
+
+	/* Set a reasonable heartbeat before we stop the timer */
+	tco_timer_set_heartbeat(30);
+
+	/*
+	 * Stop the TCO before we change anything so we don't race with
+	 * a zeroed timer.
+	 */
+	tco_timer_keepalive();
+	tco_timer_stop();
+
+	/* Disable SMI caused by TCO */
+	if (!request_region(MCP51_SMI_EN(tcobase), 4, "NV TCO")) {
+		pr_err("I/O address 0x%04x already in use\n",
+		       MCP51_SMI_EN(tcobase));
+		goto out;
+	}
+	val = inl(MCP51_SMI_EN(tcobase));
+	val &= ~MCP51_SMI_EN_TCO;
+	outl(val, MCP51_SMI_EN(tcobase));
+	val = inl(MCP51_SMI_EN(tcobase));
+	release_region(MCP51_SMI_EN(tcobase), 4);
+	if (val & MCP51_SMI_EN_TCO) {
+		pr_err("Could not disable SMI caused by TCO\n");
+		goto out;
+	}
+
+	/* Check chipset's NO_REBOOT bit */
+	pci_read_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, &val);
+	val |= MCP51_SMBUS_SETUP_B_TCO_REBOOT;
+	pci_write_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, val);
+	pci_read_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, &val);
+	if (!(val & MCP51_SMBUS_SETUP_B_TCO_REBOOT)) {
+		pr_err("failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
+		goto out;
+	}
+
+	return 1;
+out:
+	release_region(tcobase, 0x10);
+	return 0;
+}
+
+static int nv_tco_init(struct platform_device *dev)
+{
+	int ret;
+
+	/* Check whether or not the hardware watchdog is there */
+	if (!nv_tco_getdevice())
+		return -ENODEV;
+
+	/* Check to see if last reboot was due to watchdog timeout */
+	pr_info("Watchdog reboot %sdetected\n",
+		inl(TCO_STS(tcobase)) & TCO_STS_TCO2TO_STS ? "" : "not ");
+
+	/* Clear out the old status */
+	outl(TCO_STS_RESET, TCO_STS(tcobase));
+
+	/*
+	 * Check that the heartbeat value is within it's range.
+	 * If not, reset to the default.
+	 */
+	if (tco_timer_set_heartbeat(heartbeat)) {
+		heartbeat = WATCHDOG_HEARTBEAT;
+		tco_timer_set_heartbeat(heartbeat);
+		pr_info("heartbeat value must be 2<heartbeat<39, using %d\n",
+			heartbeat);
+	}
+
+	ret = misc_register(&nv_tco_miscdev);
+	if (ret != 0) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, ret);
+		goto unreg_region;
+	}
+
+	clear_bit(0, &timer_alive);
+
+	tco_timer_stop();
+
+	pr_info("initialized (0x%04x). heartbeat=%d sec (nowayout=%d)\n",
+		tcobase, heartbeat, nowayout);
+
+	return 0;
+
+unreg_region:
+	release_region(tcobase, 0x10);
+	return ret;
+}
+
+static void nv_tco_cleanup(void)
+{
+	u32 val;
+
+	/* Stop the timer before we leave */
+	if (!nowayout)
+		tco_timer_stop();
+
+	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
+	pci_read_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, &val);
+	val &= ~MCP51_SMBUS_SETUP_B_TCO_REBOOT;
+	pci_write_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, val);
+	pci_read_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, &val);
+	if (val & MCP51_SMBUS_SETUP_B_TCO_REBOOT) {
+		pr_crit("Couldn't unset REBOOT bit.  Machine may soon reset\n");
+	}
+
+	/* Deregister */
+	misc_deregister(&nv_tco_miscdev);
+	release_region(tcobase, 0x10);
+}
+
+static int nv_tco_remove(struct platform_device *dev)
+{
+	if (tcobase)
+		nv_tco_cleanup();
+
+	return 0;
+}
+
+static void nv_tco_shutdown(struct platform_device *dev)
+{
+	u32 val;
+
+	tco_timer_stop();
+
+	/* Some BIOSes fail the POST (once) if the NO_REBOOT flag is not
+	 * unset during shutdown. */
+	pci_read_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, &val);
+	val &= ~MCP51_SMBUS_SETUP_B_TCO_REBOOT;
+	pci_write_config_dword(tco_pci, MCP51_SMBUS_SETUP_B, val);
+}
+
+static struct platform_driver nv_tco_driver = {
+	.probe		= nv_tco_init,
+	.remove		= nv_tco_remove,
+	.shutdown	= nv_tco_shutdown,
+	.driver		= {
+		.name	= TCO_MODULE_NAME,
+	},
+};
+
+static int __init nv_tco_init_module(void)
+{
+	int err;
+
+	pr_info("NV TCO WatchDog Timer Driver v%s\n", TCO_VERSION);
+
+	err = platform_driver_register(&nv_tco_driver);
+	if (err)
+		return err;
+
+	nv_tco_platform_device = platform_device_register_simple(
+					TCO_MODULE_NAME, -1, NULL, 0);
+	if (IS_ERR(nv_tco_platform_device)) {
+		err = PTR_ERR(nv_tco_platform_device);
+		goto unreg_platform_driver;
+	}
+
+	return 0;
+
+unreg_platform_driver:
+	platform_driver_unregister(&nv_tco_driver);
+	return err;
+}
+
+static void __exit nv_tco_cleanup_module(void)
+{
+	platform_device_unregister(nv_tco_platform_device);
+	platform_driver_unregister(&nv_tco_driver);
+	pr_info("NV TCO Watchdog Module Unloaded\n");
+}
+
+module_init(nv_tco_init_module);
+module_exit(nv_tco_cleanup_module);
+
+MODULE_AUTHOR("Mike Waychison");
+MODULE_DESCRIPTION("TCO timer driver for NV chipsets");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/nv_tco.h b/drivers/watchdog/nv_tco.h
new file mode 100644
index 000000000..c2d1d04e0
--- /dev/null
+++ b/drivers/watchdog/nv_tco.h
@@ -0,0 +1,64 @@
+/*
+ *	nv_tco:	TCO timer driver for nVidia chipsets.
+ *
+ *	(c) Copyright 2005 Google Inc., All Rights Reserved.
+ *
+ *	Supported Chipsets:
+ *		- MCP51/MCP55
+ *
+ *	(c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights
+ *	Reserved.
+ *				http://www.kernelconcepts.de
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither kernel concepts nor Nils Faerber admit liability nor provide
+ *	warranty for any of this software. This material is provided
+ *	"AS-IS" and at no charge.
+ *
+ *	(c) Copyright 2000	kernel concepts <nils@kernelconcepts.de>
+ *				developed for
+ *                              Jentro AG, Haar/Munich (Germany)
+ *
+ *	TCO timer driver for NV chipsets
+ *	based on softdog.c by Alan Cox <alan@redhat.com>
+ */
+
+/*
+ * Some address definitions for the TCO
+ */
+
+#define TCO_RLD(base)	((base) + 0x00)	/* TCO Timer Reload and Current Value */
+#define TCO_TMR(base)	((base) + 0x01)	/* TCO Timer Initial Value	*/
+
+#define TCO_STS(base)	((base) + 0x04)	/* TCO Status Register		*/
+/*
+ * TCO Boot Status bit: set on TCO reset, reset by software or standby
+ * power-good (survives reboots), unfortunately this bit is never
+ * set.
+ */
+#  define TCO_STS_BOOT_STS	(1 << 9)
+/*
+ * first and 2nd timeout status bits, these also survive a warm boot,
+ * and they work, so we use them.
+ */
+#  define TCO_STS_TCO_INT_STS	(1 << 1)
+#  define TCO_STS_TCO2TO_STS	(1 << 10)
+#  define TCO_STS_RESET		(TCO_STS_BOOT_STS | TCO_STS_TCO2TO_STS | \
+				 TCO_STS_TCO_INT_STS)
+
+#define TCO_CNT(base)	((base) + 0x08)	/* TCO Control Register	*/
+#  define TCO_CNT_TCOHALT	(1 << 12)
+
+#define MCP51_SMBUS_SETUP_B 0xe8
+#  define MCP51_SMBUS_SETUP_B_TCO_REBOOT (1 << 25)
+
+/*
+ * The SMI_EN register is at the base io address + 0x04,
+ * while TCOBASE is + 0x40.
+ */
+#define MCP51_SMI_EN(base)	((base) - 0x40 + 0x04)
+#  define MCP51_SMI_EN_TCO	((1 << 4) | (1 << 5))
diff --git a/drivers/watchdog/octeon-wdt-main.c b/drivers/watchdog/octeon-wdt-main.c
new file mode 100644
index 000000000..0ec419a3f
--- /dev/null
+++ b/drivers/watchdog/octeon-wdt-main.c
@@ -0,0 +1,619 @@
+/*
+ * Octeon Watchdog driver
+ *
+ * Copyright (C) 2007-2017 Cavium, Inc.
+ *
+ * Converted to use WATCHDOG_CORE by Aaro Koskinen <aaro.koskinen@iki.fi>.
+ *
+ * Some parts derived from wdt.c
+ *
+ *	(c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ *	warranty for any of this software. This material is provided
+ *	"AS-IS" and at no charge.
+ *
+ *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ *
+ * The OCTEON watchdog has a maximum timeout of 2^32 * io_clock.
+ * For most systems this is less than 10 seconds, so to allow for
+ * software to request longer watchdog heartbeats, we maintain software
+ * counters to count multiples of the base rate.  If the system locks
+ * up in such a manner that we can not run the software counters, the
+ * only result is a watchdog reset sooner than was requested.  But
+ * that is OK, because in this case userspace would likely not be able
+ * to do anything anyhow.
+ *
+ * The hardware watchdog interval we call the period.  The OCTEON
+ * watchdog goes through several stages, after the first period an
+ * irq is asserted, then if it is not reset, after the next period NMI
+ * is asserted, then after an additional period a chip wide soft reset.
+ * So for the software counters, we reset watchdog after each period
+ * and decrement the counter.  But for the last two periods we need to
+ * let the watchdog progress to the NMI stage so we disable the irq
+ * and let it proceed.  Once in the NMI, we print the register state
+ * to the serial port and then wait for the reset.
+ *
+ * A watchdog is maintained for each CPU in the system, that way if
+ * one CPU suffers a lockup, we also get a register dump and reset.
+ * The userspace ping resets the watchdog on all CPUs.
+ *
+ * Before userspace opens the watchdog device, we still run the
+ * watchdogs to catch any lockups that may be kernel related.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/interrupt.h>
+#include <linux/watchdog.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/cpu.h>
+#include <linux/irq.h>
+
+#include <asm/mipsregs.h>
+#include <asm/uasm.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-boot-vector.h>
+#include <asm/octeon/cvmx-ciu2-defs.h>
+#include <asm/octeon/cvmx-rst-defs.h>
+
+/* Watchdog interrupt major block number (8 MSBs of intsn) */
+#define WD_BLOCK_NUMBER		0x01
+
+static int divisor;
+
+/* The count needed to achieve timeout_sec. */
+static unsigned int timeout_cnt;
+
+/* The maximum period supported. */
+static unsigned int max_timeout_sec;
+
+/* The current period.  */
+static unsigned int timeout_sec;
+
+/* Set to non-zero when userspace countdown mode active */
+static bool do_countdown;
+static unsigned int countdown_reset;
+static unsigned int per_cpu_countdown[NR_CPUS];
+
+static cpumask_t irq_enabled_cpus;
+
+#define WD_TIMO 60			/* Default heartbeat = 60 seconds */
+
+#define CVMX_GSERX_SCRATCH(offset) (CVMX_ADD_IO_SEG(0x0001180090000020ull) + ((offset) & 15) * 0x1000000ull)
+
+static int heartbeat = WD_TIMO;
+module_param(heartbeat, int, 0444);
+MODULE_PARM_DESC(heartbeat,
+	"Watchdog heartbeat in seconds. (0 < heartbeat, default="
+				__MODULE_STRING(WD_TIMO) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0444);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int disable;
+module_param(disable, int, 0444);
+MODULE_PARM_DESC(disable,
+	"Disable the watchdog entirely (default=0)");
+
+static struct cvmx_boot_vector_element *octeon_wdt_bootvector;
+
+void octeon_wdt_nmi_stage2(void);
+
+static int cpu2core(int cpu)
+{
+#ifdef CONFIG_SMP
+	return cpu_logical_map(cpu) & 0x3f;
+#else
+	return cvmx_get_core_num();
+#endif
+}
+
+/**
+ * Poke the watchdog when an interrupt is received
+ *
+ * @cpl:
+ * @dev_id:
+ *
+ * Returns
+ */
+static irqreturn_t octeon_wdt_poke_irq(int cpl, void *dev_id)
+{
+	int cpu = raw_smp_processor_id();
+	unsigned int core = cpu2core(cpu);
+	int node = cpu_to_node(cpu);
+
+	if (do_countdown) {
+		if (per_cpu_countdown[cpu] > 0) {
+			/* We're alive, poke the watchdog */
+			cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(core), 1);
+			per_cpu_countdown[cpu]--;
+		} else {
+			/* Bad news, you are about to reboot. */
+			disable_irq_nosync(cpl);
+			cpumask_clear_cpu(cpu, &irq_enabled_cpus);
+		}
+	} else {
+		/* Not open, just ping away... */
+		cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(core), 1);
+	}
+	return IRQ_HANDLED;
+}
+
+/* From setup.c */
+extern int prom_putchar(char c);
+
+/**
+ * Write a string to the uart
+ *
+ * @str:        String to write
+ */
+static void octeon_wdt_write_string(const char *str)
+{
+	/* Just loop writing one byte at a time */
+	while (*str)
+		prom_putchar(*str++);
+}
+
+/**
+ * Write a hex number out of the uart
+ *
+ * @value:      Number to display
+ * @digits:     Number of digits to print (1 to 16)
+ */
+static void octeon_wdt_write_hex(u64 value, int digits)
+{
+	int d;
+	int v;
+
+	for (d = 0; d < digits; d++) {
+		v = (value >> ((digits - d - 1) * 4)) & 0xf;
+		if (v >= 10)
+			prom_putchar('a' + v - 10);
+		else
+			prom_putchar('0' + v);
+	}
+}
+
+static const char reg_name[][3] = {
+	"$0", "at", "v0", "v1", "a0", "a1", "a2", "a3",
+	"a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3",
+	"s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
+	"t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra"
+};
+
+/**
+ * NMI stage 3 handler. NMIs are handled in the following manner:
+ * 1) The first NMI handler enables CVMSEG and transfers from
+ * the bootbus region into normal memory. It is careful to not
+ * destroy any registers.
+ * 2) The second stage handler uses CVMSEG to save the registers
+ * and create a stack for C code. It then calls the third level
+ * handler with one argument, a pointer to the register values.
+ * 3) The third, and final, level handler is the following C
+ * function that prints out some useful infomration.
+ *
+ * @reg:    Pointer to register state before the NMI
+ */
+void octeon_wdt_nmi_stage3(u64 reg[32])
+{
+	u64 i;
+
+	unsigned int coreid = cvmx_get_core_num();
+	/*
+	 * Save status and cause early to get them before any changes
+	 * might happen.
+	 */
+	u64 cp0_cause = read_c0_cause();
+	u64 cp0_status = read_c0_status();
+	u64 cp0_error_epc = read_c0_errorepc();
+	u64 cp0_epc = read_c0_epc();
+
+	/* Delay so output from all cores output is not jumbled together. */
+	udelay(85000 * coreid);
+
+	octeon_wdt_write_string("\r\n*** NMI Watchdog interrupt on Core 0x");
+	octeon_wdt_write_hex(coreid, 2);
+	octeon_wdt_write_string(" ***\r\n");
+	for (i = 0; i < 32; i++) {
+		octeon_wdt_write_string("\t");
+		octeon_wdt_write_string(reg_name[i]);
+		octeon_wdt_write_string("\t0x");
+		octeon_wdt_write_hex(reg[i], 16);
+		if (i & 1)
+			octeon_wdt_write_string("\r\n");
+	}
+	octeon_wdt_write_string("\terr_epc\t0x");
+	octeon_wdt_write_hex(cp0_error_epc, 16);
+
+	octeon_wdt_write_string("\tepc\t0x");
+	octeon_wdt_write_hex(cp0_epc, 16);
+	octeon_wdt_write_string("\r\n");
+
+	octeon_wdt_write_string("\tstatus\t0x");
+	octeon_wdt_write_hex(cp0_status, 16);
+	octeon_wdt_write_string("\tcause\t0x");
+	octeon_wdt_write_hex(cp0_cause, 16);
+	octeon_wdt_write_string("\r\n");
+
+	/* The CIU register is different for each Octeon model. */
+	if (OCTEON_IS_MODEL(OCTEON_CN68XX)) {
+		octeon_wdt_write_string("\tsrc_wd\t0x");
+		octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU2_SRC_PPX_IP2_WDOG(coreid)), 16);
+		octeon_wdt_write_string("\ten_wd\t0x");
+		octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU2_EN_PPX_IP2_WDOG(coreid)), 16);
+		octeon_wdt_write_string("\r\n");
+		octeon_wdt_write_string("\tsrc_rml\t0x");
+		octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU2_SRC_PPX_IP2_RML(coreid)), 16);
+		octeon_wdt_write_string("\ten_rml\t0x");
+		octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU2_EN_PPX_IP2_RML(coreid)), 16);
+		octeon_wdt_write_string("\r\n");
+		octeon_wdt_write_string("\tsum\t0x");
+		octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU2_SUM_PPX_IP2(coreid)), 16);
+		octeon_wdt_write_string("\r\n");
+	} else if (!octeon_has_feature(OCTEON_FEATURE_CIU3)) {
+		octeon_wdt_write_string("\tsum0\t0x");
+		octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU_INTX_SUM0(coreid * 2)), 16);
+		octeon_wdt_write_string("\ten0\t0x");
+		octeon_wdt_write_hex(cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)), 16);
+		octeon_wdt_write_string("\r\n");
+	}
+
+	octeon_wdt_write_string("*** Chip soft reset soon ***\r\n");
+
+	/*
+	 * G-30204: We must trigger a soft reset before watchdog
+	 * does an incomplete job of doing it.
+	 */
+	if (OCTEON_IS_OCTEON3() && !OCTEON_IS_MODEL(OCTEON_CN70XX)) {
+		u64 scr;
+		unsigned int node = cvmx_get_node_num();
+		unsigned int lcore = cvmx_get_local_core_num();
+		union cvmx_ciu_wdogx ciu_wdog;
+
+		/*
+		 * Wait for other cores to print out information, but
+		 * not too long.  Do the soft reset before watchdog
+		 * can trigger it.
+		 */
+		do {
+			ciu_wdog.u64 = cvmx_read_csr_node(node, CVMX_CIU_WDOGX(lcore));
+		} while (ciu_wdog.s.cnt > 0x10000);
+
+		scr = cvmx_read_csr_node(0, CVMX_GSERX_SCRATCH(0));
+		scr |= 1 << 11; /* Indicate watchdog in bit 11 */
+		cvmx_write_csr_node(0, CVMX_GSERX_SCRATCH(0), scr);
+		cvmx_write_csr_node(0, CVMX_RST_SOFT_RST, 1);
+	}
+}
+
+static int octeon_wdt_cpu_to_irq(int cpu)
+{
+	unsigned int coreid;
+	int node;
+	int irq;
+
+	coreid = cpu2core(cpu);
+	node = cpu_to_node(cpu);
+
+	if (octeon_has_feature(OCTEON_FEATURE_CIU3)) {
+		struct irq_domain *domain;
+		int hwirq;
+
+		domain = octeon_irq_get_block_domain(node,
+						     WD_BLOCK_NUMBER);
+		hwirq = WD_BLOCK_NUMBER << 12 | 0x200 | coreid;
+		irq = irq_find_mapping(domain, hwirq);
+	} else {
+		irq = OCTEON_IRQ_WDOG0 + coreid;
+	}
+	return irq;
+}
+
+static int octeon_wdt_cpu_pre_down(unsigned int cpu)
+{
+	unsigned int core;
+	int node;
+	union cvmx_ciu_wdogx ciu_wdog;
+
+	core = cpu2core(cpu);
+
+	node = cpu_to_node(cpu);
+
+	/* Poke the watchdog to clear out its state */
+	cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(core), 1);
+
+	/* Disable the hardware. */
+	ciu_wdog.u64 = 0;
+	cvmx_write_csr_node(node, CVMX_CIU_WDOGX(core), ciu_wdog.u64);
+
+	free_irq(octeon_wdt_cpu_to_irq(cpu), octeon_wdt_poke_irq);
+	return 0;
+}
+
+static int octeon_wdt_cpu_online(unsigned int cpu)
+{
+	unsigned int core;
+	unsigned int irq;
+	union cvmx_ciu_wdogx ciu_wdog;
+	int node;
+	struct irq_domain *domain;
+	int hwirq;
+
+	core = cpu2core(cpu);
+	node = cpu_to_node(cpu);
+
+	octeon_wdt_bootvector[core].target_ptr = (u64)octeon_wdt_nmi_stage2;
+
+	/* Disable it before doing anything with the interrupts. */
+	ciu_wdog.u64 = 0;
+	cvmx_write_csr_node(node, CVMX_CIU_WDOGX(core), ciu_wdog.u64);
+
+	per_cpu_countdown[cpu] = countdown_reset;
+
+	if (octeon_has_feature(OCTEON_FEATURE_CIU3)) {
+		/* Must get the domain for the watchdog block */
+		domain = octeon_irq_get_block_domain(node, WD_BLOCK_NUMBER);
+
+		/* Get a irq for the wd intsn (hardware interrupt) */
+		hwirq = WD_BLOCK_NUMBER << 12 | 0x200 | core;
+		irq = irq_create_mapping(domain, hwirq);
+		irqd_set_trigger_type(irq_get_irq_data(irq),
+				      IRQ_TYPE_EDGE_RISING);
+	} else
+		irq = OCTEON_IRQ_WDOG0 + core;
+
+	if (request_irq(irq, octeon_wdt_poke_irq,
+			IRQF_NO_THREAD, "octeon_wdt", octeon_wdt_poke_irq))
+		panic("octeon_wdt: Couldn't obtain irq %d", irq);
+
+	/* Must set the irq affinity here */
+	if (octeon_has_feature(OCTEON_FEATURE_CIU3)) {
+		cpumask_t mask;
+
+		cpumask_clear(&mask);
+		cpumask_set_cpu(cpu, &mask);
+		irq_set_affinity(irq, &mask);
+	}
+
+	cpumask_set_cpu(cpu, &irq_enabled_cpus);
+
+	/* Poke the watchdog to clear out its state */
+	cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(core), 1);
+
+	/* Finally enable the watchdog now that all handlers are installed */
+	ciu_wdog.u64 = 0;
+	ciu_wdog.s.len = timeout_cnt;
+	ciu_wdog.s.mode = 3;	/* 3 = Interrupt + NMI + Soft-Reset */
+	cvmx_write_csr_node(node, CVMX_CIU_WDOGX(core), ciu_wdog.u64);
+
+	return 0;
+}
+
+static int octeon_wdt_ping(struct watchdog_device __always_unused *wdog)
+{
+	int cpu;
+	int coreid;
+	int node;
+
+	if (disable)
+		return 0;
+
+	for_each_online_cpu(cpu) {
+		coreid = cpu2core(cpu);
+		node = cpu_to_node(cpu);
+		cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(coreid), 1);
+		per_cpu_countdown[cpu] = countdown_reset;
+		if ((countdown_reset || !do_countdown) &&
+		    !cpumask_test_cpu(cpu, &irq_enabled_cpus)) {
+			/* We have to enable the irq */
+			enable_irq(octeon_wdt_cpu_to_irq(cpu));
+			cpumask_set_cpu(cpu, &irq_enabled_cpus);
+		}
+	}
+	return 0;
+}
+
+static void octeon_wdt_calc_parameters(int t)
+{
+	unsigned int periods;
+
+	timeout_sec = max_timeout_sec;
+
+
+	/*
+	 * Find the largest interrupt period, that can evenly divide
+	 * the requested heartbeat time.
+	 */
+	while ((t % timeout_sec) != 0)
+		timeout_sec--;
+
+	periods = t / timeout_sec;
+
+	/*
+	 * The last two periods are after the irq is disabled, and
+	 * then to the nmi, so we subtract them off.
+	 */
+
+	countdown_reset = periods > 2 ? periods - 2 : 0;
+	heartbeat = t;
+	timeout_cnt = ((octeon_get_io_clock_rate() / divisor) * timeout_sec) >> 8;
+}
+
+static int octeon_wdt_set_timeout(struct watchdog_device *wdog,
+				  unsigned int t)
+{
+	int cpu;
+	int coreid;
+	union cvmx_ciu_wdogx ciu_wdog;
+	int node;
+
+	if (t <= 0)
+		return -1;
+
+	octeon_wdt_calc_parameters(t);
+
+	if (disable)
+		return 0;
+
+	for_each_online_cpu(cpu) {
+		coreid = cpu2core(cpu);
+		node = cpu_to_node(cpu);
+		cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(coreid), 1);
+		ciu_wdog.u64 = 0;
+		ciu_wdog.s.len = timeout_cnt;
+		ciu_wdog.s.mode = 3;	/* 3 = Interrupt + NMI + Soft-Reset */
+		cvmx_write_csr_node(node, CVMX_CIU_WDOGX(coreid), ciu_wdog.u64);
+		cvmx_write_csr_node(node, CVMX_CIU_PP_POKEX(coreid), 1);
+	}
+	octeon_wdt_ping(wdog); /* Get the irqs back on. */
+	return 0;
+}
+
+static int octeon_wdt_start(struct watchdog_device *wdog)
+{
+	octeon_wdt_ping(wdog);
+	do_countdown = 1;
+	return 0;
+}
+
+static int octeon_wdt_stop(struct watchdog_device *wdog)
+{
+	do_countdown = 0;
+	octeon_wdt_ping(wdog);
+	return 0;
+}
+
+static const struct watchdog_info octeon_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+	.identity = "OCTEON",
+};
+
+static const struct watchdog_ops octeon_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= octeon_wdt_start,
+	.stop		= octeon_wdt_stop,
+	.ping		= octeon_wdt_ping,
+	.set_timeout	= octeon_wdt_set_timeout,
+};
+
+static struct watchdog_device octeon_wdt = {
+	.info	= &octeon_wdt_info,
+	.ops	= &octeon_wdt_ops,
+};
+
+static enum cpuhp_state octeon_wdt_online;
+/**
+ * Module/ driver initialization.
+ *
+ * Returns Zero on success
+ */
+static int __init octeon_wdt_init(void)
+{
+	int ret;
+
+	octeon_wdt_bootvector = cvmx_boot_vector_get();
+	if (!octeon_wdt_bootvector) {
+		pr_err("Error: Cannot allocate boot vector.\n");
+		return -ENOMEM;
+	}
+
+	if (OCTEON_IS_MODEL(OCTEON_CN68XX))
+		divisor = 0x200;
+	else if (OCTEON_IS_MODEL(OCTEON_CN78XX))
+		divisor = 0x400;
+	else
+		divisor = 0x100;
+
+	/*
+	 * Watchdog time expiration length = The 16 bits of LEN
+	 * represent the most significant bits of a 24 bit decrementer
+	 * that decrements every divisor cycle.
+	 *
+	 * Try for a timeout of 5 sec, if that fails a smaller number
+	 * of even seconds,
+	 */
+	max_timeout_sec = 6;
+	do {
+		max_timeout_sec--;
+		timeout_cnt = ((octeon_get_io_clock_rate() / divisor) * max_timeout_sec) >> 8;
+	} while (timeout_cnt > 65535);
+
+	BUG_ON(timeout_cnt == 0);
+
+	octeon_wdt_calc_parameters(heartbeat);
+
+	pr_info("Initial granularity %d Sec\n", timeout_sec);
+
+	octeon_wdt.timeout	= timeout_sec;
+	octeon_wdt.max_timeout	= UINT_MAX;
+
+	watchdog_set_nowayout(&octeon_wdt, nowayout);
+
+	ret = watchdog_register_device(&octeon_wdt);
+	if (ret) {
+		pr_err("watchdog_register_device() failed: %d\n", ret);
+		return ret;
+	}
+
+	if (disable) {
+		pr_notice("disabled\n");
+		return 0;
+	}
+
+	cpumask_clear(&irq_enabled_cpus);
+
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "watchdog/octeon:online",
+				octeon_wdt_cpu_online, octeon_wdt_cpu_pre_down);
+	if (ret < 0)
+		goto err;
+	octeon_wdt_online = ret;
+	return 0;
+err:
+	cvmx_write_csr(CVMX_MIO_BOOT_LOC_CFGX(0), 0);
+	watchdog_unregister_device(&octeon_wdt);
+	return ret;
+}
+
+/**
+ * Module / driver shutdown
+ */
+static void __exit octeon_wdt_cleanup(void)
+{
+	watchdog_unregister_device(&octeon_wdt);
+
+	if (disable)
+		return;
+
+	cpuhp_remove_state(octeon_wdt_online);
+
+	/*
+	 * Disable the boot-bus memory, the code it points to is soon
+	 * to go missing.
+	 */
+	cvmx_write_csr(CVMX_MIO_BOOT_LOC_CFGX(0), 0);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cavium Inc. <support@cavium.com>");
+MODULE_DESCRIPTION("Cavium Inc. OCTEON Watchdog driver.");
+module_init(octeon_wdt_init);
+module_exit(octeon_wdt_cleanup);
diff --git a/drivers/watchdog/octeon-wdt-nmi.S b/drivers/watchdog/octeon-wdt-nmi.S
new file mode 100644
index 000000000..97f6eb7b5
--- /dev/null
+++ b/drivers/watchdog/octeon-wdt-nmi.S
@@ -0,0 +1,90 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007-2017 Cavium, Inc.
+ */
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#define CVMSEG_BASE	-32768
+#define CVMSEG_SIZE	6912
+#define SAVE_REG(r)	sd $r, CVMSEG_BASE + CVMSEG_SIZE - ((32 - r) * 8)($0)
+
+        NESTED(octeon_wdt_nmi_stage2, 0, sp)
+	.set 	push
+	.set 	noreorder
+	.set 	noat
+	/* Clear Dcache so cvmseg works right. */
+	cache	1,0($0)
+	/* Use K0 to do a read/modify/write of CVMMEMCTL */
+	dmfc0	k0, $11, 7
+	/* Clear out the size of CVMSEG	*/
+	dins	k0, $0, 0, 6
+	/* Set CVMSEG to its largest value */
+	ori	k0, k0, 0x1c0 | 54
+	/* Store the CVMMEMCTL value */
+	dmtc0	k0, $11, 7
+	/*
+	 * Restore K0 from the debug scratch register, it was saved in
+	 * the boot-vector code.
+	 */
+	dmfc0	k0, $31
+
+	/*
+	 * Save all registers to the top CVMSEG. This shouldn't
+	 * corrupt any state used by the kernel. Also all registers
+	 * should have the value right before the NMI.
+	 */
+	SAVE_REG(0)
+	SAVE_REG(1)
+	SAVE_REG(2)
+	SAVE_REG(3)
+	SAVE_REG(4)
+	SAVE_REG(5)
+	SAVE_REG(6)
+	SAVE_REG(7)
+	SAVE_REG(8)
+	SAVE_REG(9)
+	SAVE_REG(10)
+	SAVE_REG(11)
+	SAVE_REG(12)
+	SAVE_REG(13)
+	SAVE_REG(14)
+	SAVE_REG(15)
+	SAVE_REG(16)
+	SAVE_REG(17)
+	SAVE_REG(18)
+	SAVE_REG(19)
+	SAVE_REG(20)
+	SAVE_REG(21)
+	SAVE_REG(22)
+	SAVE_REG(23)
+	SAVE_REG(24)
+	SAVE_REG(25)
+	SAVE_REG(26)
+	SAVE_REG(27)
+	SAVE_REG(28)
+	SAVE_REG(29)
+	SAVE_REG(30)
+	SAVE_REG(31)
+	/* Write zero to all CVMSEG locations per Core-15169 */
+	dli	a0, CVMSEG_SIZE - (33 * 8)
+1:	sd	zero, CVMSEG_BASE(a0)
+	daddiu	a0, a0, -8
+	bgez	a0, 1b
+	nop
+	/* Set the stack to begin right below the registers */
+	dli	sp, CVMSEG_BASE + CVMSEG_SIZE - (32 * 8)
+	/* Load the address of the third stage handler */
+	dla	$25, octeon_wdt_nmi_stage3
+	/* Call the third stage handler */
+	jal	$25
+	/* a0 is the address of the saved registers */
+	 move	a0, sp
+	/* Loop forvever if we get here. */
+2:	b	2b
+	nop
+	.set pop
+	END(octeon_wdt_nmi_stage2)
diff --git a/drivers/watchdog/of_xilinx_wdt.c b/drivers/watchdog/of_xilinx_wdt.c
new file mode 100644
index 000000000..d3f7eb046
--- /dev/null
+++ b/drivers/watchdog/of_xilinx_wdt.c
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Watchdog Device Driver for Xilinx axi/xps_timebase_wdt
+ *
+ * (C) Copyright 2013 - 2014 Xilinx, Inc.
+ * (C) Copyright 2011 (Alejandro Cabrera <aldaya@gmail.com>)
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/watchdog.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+
+/* Register offsets for the Wdt device */
+#define XWT_TWCSR0_OFFSET   0x0 /* Control/Status Register0 */
+#define XWT_TWCSR1_OFFSET   0x4 /* Control/Status Register1 */
+#define XWT_TBR_OFFSET      0x8 /* Timebase Register Offset */
+
+/* Control/Status Register Masks  */
+#define XWT_CSR0_WRS_MASK   0x00000008 /* Reset status */
+#define XWT_CSR0_WDS_MASK   0x00000004 /* Timer state  */
+#define XWT_CSR0_EWDT1_MASK 0x00000002 /* Enable bit 1 */
+
+/* Control/Status Register 0/1 bits  */
+#define XWT_CSRX_EWDT2_MASK 0x00000001 /* Enable bit 2 */
+
+/* SelfTest constants */
+#define XWT_MAX_SELFTEST_LOOP_COUNT 0x00010000
+#define XWT_TIMER_FAILED            0xFFFFFFFF
+
+#define WATCHDOG_NAME     "Xilinx Watchdog"
+
+struct xwdt_device {
+	void __iomem *base;
+	u32 wdt_interval;
+	spinlock_t spinlock;
+	struct watchdog_device xilinx_wdt_wdd;
+	struct clk		*clk;
+};
+
+static int xilinx_wdt_start(struct watchdog_device *wdd)
+{
+	int ret;
+	u32 control_status_reg;
+	struct xwdt_device *xdev = watchdog_get_drvdata(wdd);
+
+	ret = clk_enable(xdev->clk);
+	if (ret) {
+		dev_err(wdd->parent, "Failed to enable clock\n");
+		return ret;
+	}
+
+	spin_lock(&xdev->spinlock);
+
+	/* Clean previous status and enable the watchdog timer */
+	control_status_reg = ioread32(xdev->base + XWT_TWCSR0_OFFSET);
+	control_status_reg |= (XWT_CSR0_WRS_MASK | XWT_CSR0_WDS_MASK);
+
+	iowrite32((control_status_reg | XWT_CSR0_EWDT1_MASK),
+		  xdev->base + XWT_TWCSR0_OFFSET);
+
+	iowrite32(XWT_CSRX_EWDT2_MASK, xdev->base + XWT_TWCSR1_OFFSET);
+
+	spin_unlock(&xdev->spinlock);
+
+	return 0;
+}
+
+static int xilinx_wdt_stop(struct watchdog_device *wdd)
+{
+	u32 control_status_reg;
+	struct xwdt_device *xdev = watchdog_get_drvdata(wdd);
+
+	spin_lock(&xdev->spinlock);
+
+	control_status_reg = ioread32(xdev->base + XWT_TWCSR0_OFFSET);
+
+	iowrite32((control_status_reg & ~XWT_CSR0_EWDT1_MASK),
+		  xdev->base + XWT_TWCSR0_OFFSET);
+
+	iowrite32(0, xdev->base + XWT_TWCSR1_OFFSET);
+
+	spin_unlock(&xdev->spinlock);
+
+	clk_disable(xdev->clk);
+
+	pr_info("Stopped!\n");
+
+	return 0;
+}
+
+static int xilinx_wdt_keepalive(struct watchdog_device *wdd)
+{
+	u32 control_status_reg;
+	struct xwdt_device *xdev = watchdog_get_drvdata(wdd);
+
+	spin_lock(&xdev->spinlock);
+
+	control_status_reg = ioread32(xdev->base + XWT_TWCSR0_OFFSET);
+	control_status_reg |= (XWT_CSR0_WRS_MASK | XWT_CSR0_WDS_MASK);
+	iowrite32(control_status_reg, xdev->base + XWT_TWCSR0_OFFSET);
+
+	spin_unlock(&xdev->spinlock);
+
+	return 0;
+}
+
+static const struct watchdog_info xilinx_wdt_ident = {
+	.options =  WDIOF_MAGICCLOSE |
+		    WDIOF_KEEPALIVEPING,
+	.firmware_version =	1,
+	.identity =	WATCHDOG_NAME,
+};
+
+static const struct watchdog_ops xilinx_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = xilinx_wdt_start,
+	.stop = xilinx_wdt_stop,
+	.ping = xilinx_wdt_keepalive,
+};
+
+static u32 xwdt_selftest(struct xwdt_device *xdev)
+{
+	int i;
+	u32 timer_value1;
+	u32 timer_value2;
+
+	spin_lock(&xdev->spinlock);
+
+	timer_value1 = ioread32(xdev->base + XWT_TBR_OFFSET);
+	timer_value2 = ioread32(xdev->base + XWT_TBR_OFFSET);
+
+	for (i = 0;
+		((i <= XWT_MAX_SELFTEST_LOOP_COUNT) &&
+			(timer_value2 == timer_value1)); i++) {
+		timer_value2 = ioread32(xdev->base + XWT_TBR_OFFSET);
+	}
+
+	spin_unlock(&xdev->spinlock);
+
+	if (timer_value2 != timer_value1)
+		return ~XWT_TIMER_FAILED;
+	else
+		return XWT_TIMER_FAILED;
+}
+
+static int xwdt_probe(struct platform_device *pdev)
+{
+	int rc;
+	u32 pfreq = 0, enable_once = 0;
+	struct resource *res;
+	struct xwdt_device *xdev;
+	struct watchdog_device *xilinx_wdt_wdd;
+
+	xdev = devm_kzalloc(&pdev->dev, sizeof(*xdev), GFP_KERNEL);
+	if (!xdev)
+		return -ENOMEM;
+
+	xilinx_wdt_wdd = &xdev->xilinx_wdt_wdd;
+	xilinx_wdt_wdd->info = &xilinx_wdt_ident;
+	xilinx_wdt_wdd->ops = &xilinx_wdt_ops;
+	xilinx_wdt_wdd->parent = &pdev->dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	xdev->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(xdev->base))
+		return PTR_ERR(xdev->base);
+
+	rc = of_property_read_u32(pdev->dev.of_node, "xlnx,wdt-interval",
+				  &xdev->wdt_interval);
+	if (rc)
+		dev_warn(&pdev->dev,
+			 "Parameter \"xlnx,wdt-interval\" not found\n");
+
+	rc = of_property_read_u32(pdev->dev.of_node, "xlnx,wdt-enable-once",
+				  &enable_once);
+	if (rc)
+		dev_warn(&pdev->dev,
+			 "Parameter \"xlnx,wdt-enable-once\" not found\n");
+
+	watchdog_set_nowayout(xilinx_wdt_wdd, enable_once);
+
+	xdev->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(xdev->clk)) {
+		if (PTR_ERR(xdev->clk) != -ENOENT)
+			return PTR_ERR(xdev->clk);
+
+		/*
+		 * Clock framework support is optional, continue on
+		 * anyways if we don't find a matching clock.
+		 */
+		xdev->clk = NULL;
+
+		rc = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+					  &pfreq);
+		if (rc)
+			dev_warn(&pdev->dev,
+				 "The watchdog clock freq cannot be obtained\n");
+	} else {
+		pfreq = clk_get_rate(xdev->clk);
+	}
+
+	/*
+	 * Twice of the 2^wdt_interval / freq  because the first wdt overflow is
+	 * ignored (interrupt), reset is only generated at second wdt overflow
+	 */
+	if (pfreq && xdev->wdt_interval)
+		xilinx_wdt_wdd->timeout = 2 * ((1 << xdev->wdt_interval) /
+					  pfreq);
+
+	spin_lock_init(&xdev->spinlock);
+	watchdog_set_drvdata(xilinx_wdt_wdd, xdev);
+
+	rc = clk_prepare_enable(xdev->clk);
+	if (rc) {
+		dev_err(&pdev->dev, "unable to enable clock\n");
+		return rc;
+	}
+
+	rc = xwdt_selftest(xdev);
+	if (rc == XWT_TIMER_FAILED) {
+		dev_err(&pdev->dev, "SelfTest routine error\n");
+		goto err_clk_disable;
+	}
+
+	rc = watchdog_register_device(xilinx_wdt_wdd);
+	if (rc) {
+		dev_err(&pdev->dev, "Cannot register watchdog (err=%d)\n", rc);
+		goto err_clk_disable;
+	}
+
+	clk_disable(xdev->clk);
+
+	dev_info(&pdev->dev, "Xilinx Watchdog Timer at %p with timeout %ds\n",
+		 xdev->base, xilinx_wdt_wdd->timeout);
+
+	platform_set_drvdata(pdev, xdev);
+
+	return 0;
+err_clk_disable:
+	clk_disable_unprepare(xdev->clk);
+
+	return rc;
+}
+
+static int xwdt_remove(struct platform_device *pdev)
+{
+	struct xwdt_device *xdev = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&xdev->xilinx_wdt_wdd);
+	clk_disable_unprepare(xdev->clk);
+
+	return 0;
+}
+
+/**
+ * xwdt_suspend - Suspend the device.
+ *
+ * @dev: handle to the device structure.
+ * Return: 0 always.
+ */
+static int __maybe_unused xwdt_suspend(struct device *dev)
+{
+	struct xwdt_device *xdev = dev_get_drvdata(dev);
+
+	if (watchdog_active(&xdev->xilinx_wdt_wdd))
+		xilinx_wdt_stop(&xdev->xilinx_wdt_wdd);
+
+	return 0;
+}
+
+/**
+ * xwdt_resume - Resume the device.
+ *
+ * @dev: handle to the device structure.
+ * Return: 0 on success, errno otherwise.
+ */
+static int __maybe_unused xwdt_resume(struct device *dev)
+{
+	struct xwdt_device *xdev = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (watchdog_active(&xdev->xilinx_wdt_wdd))
+		ret = xilinx_wdt_start(&xdev->xilinx_wdt_wdd);
+
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(xwdt_pm_ops, xwdt_suspend, xwdt_resume);
+
+/* Match table for of_platform binding */
+static const struct of_device_id xwdt_of_match[] = {
+	{ .compatible = "xlnx,xps-timebase-wdt-1.00.a", },
+	{ .compatible = "xlnx,xps-timebase-wdt-1.01.a", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, xwdt_of_match);
+
+static struct platform_driver xwdt_driver = {
+	.probe       = xwdt_probe,
+	.remove      = xwdt_remove,
+	.driver = {
+		.name  = WATCHDOG_NAME,
+		.of_match_table = xwdt_of_match,
+		.pm = &xwdt_pm_ops,
+	},
+};
+
+module_platform_driver(xwdt_driver);
+
+MODULE_AUTHOR("Alejandro Cabrera <aldaya@gmail.com>");
+MODULE_DESCRIPTION("Xilinx Watchdog driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
new file mode 100644
index 000000000..7376ba56c
--- /dev/null
+++ b/drivers/watchdog/omap_wdt.c
@@ -0,0 +1,386 @@
+/*
+ * omap_wdt.c
+ *
+ * Watchdog driver for the TI OMAP 16xx & 24xx/34xx 32KHz (non-secure) watchdog
+ *
+ * Author: MontaVista Software, Inc.
+ *	 <gdavis@mvista.com> or <source@mvista.com>
+ *
+ * 2003 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * History:
+ *
+ * 20030527: George G. Davis <gdavis@mvista.com>
+ *	Initially based on linux-2.4.19-rmk7-pxa1/drivers/char/sa1100_wdt.c
+ *	(c) Copyright 2000 Oleg Drokin <green@crimea.edu>
+ *	Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ * Copyright (c) 2004 Texas Instruments.
+ *	1. Modified to support OMAP1610 32-KHz watchdog timer
+ *	2. Ported to 2.6 kernel
+ *
+ * Copyright (c) 2005 David Brownell
+ *	Use the driver model and standard identifiers; handle bigger timeouts.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/watchdog.h>
+#include <linux/reboot.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/moduleparam.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_data/omap-wd-timer.h>
+
+#include "omap_wdt.h"
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+	"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static unsigned timer_margin;
+module_param(timer_margin, uint, 0);
+MODULE_PARM_DESC(timer_margin, "initial watchdog timeout (in seconds)");
+
+#define to_omap_wdt_dev(_wdog)	container_of(_wdog, struct omap_wdt_dev, wdog)
+
+static bool early_enable;
+module_param(early_enable, bool, 0);
+MODULE_PARM_DESC(early_enable,
+	"Watchdog is started on module insertion (default=0)");
+
+struct omap_wdt_dev {
+	struct watchdog_device wdog;
+	void __iomem    *base;          /* physical */
+	struct device   *dev;
+	bool		omap_wdt_users;
+	int		wdt_trgr_pattern;
+	struct mutex	lock;		/* to avoid races with PM */
+};
+
+static void omap_wdt_reload(struct omap_wdt_dev *wdev)
+{
+	void __iomem    *base = wdev->base;
+
+	/* wait for posted write to complete */
+	while ((readl_relaxed(base + OMAP_WATCHDOG_WPS)) & 0x08)
+		cpu_relax();
+
+	wdev->wdt_trgr_pattern = ~wdev->wdt_trgr_pattern;
+	writel_relaxed(wdev->wdt_trgr_pattern, (base + OMAP_WATCHDOG_TGR));
+
+	/* wait for posted write to complete */
+	while ((readl_relaxed(base + OMAP_WATCHDOG_WPS)) & 0x08)
+		cpu_relax();
+	/* reloaded WCRR from WLDR */
+}
+
+static void omap_wdt_enable(struct omap_wdt_dev *wdev)
+{
+	void __iomem *base = wdev->base;
+
+	/* Sequence to enable the watchdog */
+	writel_relaxed(0xBBBB, base + OMAP_WATCHDOG_SPR);
+	while ((readl_relaxed(base + OMAP_WATCHDOG_WPS)) & 0x10)
+		cpu_relax();
+
+	writel_relaxed(0x4444, base + OMAP_WATCHDOG_SPR);
+	while ((readl_relaxed(base + OMAP_WATCHDOG_WPS)) & 0x10)
+		cpu_relax();
+}
+
+static void omap_wdt_disable(struct omap_wdt_dev *wdev)
+{
+	void __iomem *base = wdev->base;
+
+	/* sequence required to disable watchdog */
+	writel_relaxed(0xAAAA, base + OMAP_WATCHDOG_SPR);	/* TIMER_MODE */
+	while (readl_relaxed(base + OMAP_WATCHDOG_WPS) & 0x10)
+		cpu_relax();
+
+	writel_relaxed(0x5555, base + OMAP_WATCHDOG_SPR);	/* TIMER_MODE */
+	while (readl_relaxed(base + OMAP_WATCHDOG_WPS) & 0x10)
+		cpu_relax();
+}
+
+static void omap_wdt_set_timer(struct omap_wdt_dev *wdev,
+				   unsigned int timeout)
+{
+	u32 pre_margin = GET_WLDR_VAL(timeout);
+	void __iomem *base = wdev->base;
+
+	/* just count up at 32 KHz */
+	while (readl_relaxed(base + OMAP_WATCHDOG_WPS) & 0x04)
+		cpu_relax();
+
+	writel_relaxed(pre_margin, base + OMAP_WATCHDOG_LDR);
+	while (readl_relaxed(base + OMAP_WATCHDOG_WPS) & 0x04)
+		cpu_relax();
+}
+
+static int omap_wdt_start(struct watchdog_device *wdog)
+{
+	struct omap_wdt_dev *wdev = to_omap_wdt_dev(wdog);
+	void __iomem *base = wdev->base;
+
+	mutex_lock(&wdev->lock);
+
+	wdev->omap_wdt_users = true;
+
+	pm_runtime_get_sync(wdev->dev);
+
+	/*
+	 * Make sure the watchdog is disabled. This is unfortunately required
+	 * because writing to various registers with the watchdog running has no
+	 * effect.
+	 */
+	omap_wdt_disable(wdev);
+
+	/* initialize prescaler */
+	while (readl_relaxed(base + OMAP_WATCHDOG_WPS) & 0x01)
+		cpu_relax();
+
+	writel_relaxed((1 << 5) | (PTV << 2), base + OMAP_WATCHDOG_CNTRL);
+	while (readl_relaxed(base + OMAP_WATCHDOG_WPS) & 0x01)
+		cpu_relax();
+
+	omap_wdt_set_timer(wdev, wdog->timeout);
+	omap_wdt_reload(wdev); /* trigger loading of new timeout value */
+	omap_wdt_enable(wdev);
+
+	mutex_unlock(&wdev->lock);
+
+	return 0;
+}
+
+static int omap_wdt_stop(struct watchdog_device *wdog)
+{
+	struct omap_wdt_dev *wdev = to_omap_wdt_dev(wdog);
+
+	mutex_lock(&wdev->lock);
+	omap_wdt_disable(wdev);
+	pm_runtime_put_sync(wdev->dev);
+	wdev->omap_wdt_users = false;
+	mutex_unlock(&wdev->lock);
+	return 0;
+}
+
+static int omap_wdt_ping(struct watchdog_device *wdog)
+{
+	struct omap_wdt_dev *wdev = to_omap_wdt_dev(wdog);
+
+	mutex_lock(&wdev->lock);
+	omap_wdt_reload(wdev);
+	mutex_unlock(&wdev->lock);
+
+	return 0;
+}
+
+static int omap_wdt_set_timeout(struct watchdog_device *wdog,
+				unsigned int timeout)
+{
+	struct omap_wdt_dev *wdev = to_omap_wdt_dev(wdog);
+
+	mutex_lock(&wdev->lock);
+	omap_wdt_disable(wdev);
+	omap_wdt_set_timer(wdev, timeout);
+	omap_wdt_enable(wdev);
+	omap_wdt_reload(wdev);
+	wdog->timeout = timeout;
+	mutex_unlock(&wdev->lock);
+
+	return 0;
+}
+
+static unsigned int omap_wdt_get_timeleft(struct watchdog_device *wdog)
+{
+	struct omap_wdt_dev *wdev = to_omap_wdt_dev(wdog);
+	void __iomem *base = wdev->base;
+	u32 value;
+
+	value = readl_relaxed(base + OMAP_WATCHDOG_CRR);
+	return GET_WCCR_SECS(value);
+}
+
+static const struct watchdog_info omap_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+	.identity = "OMAP Watchdog",
+};
+
+static const struct watchdog_ops omap_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= omap_wdt_start,
+	.stop		= omap_wdt_stop,
+	.ping		= omap_wdt_ping,
+	.set_timeout	= omap_wdt_set_timeout,
+	.get_timeleft	= omap_wdt_get_timeleft,
+};
+
+static int omap_wdt_probe(struct platform_device *pdev)
+{
+	struct omap_wd_timer_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct resource *res;
+	struct omap_wdt_dev *wdev;
+	int ret;
+
+	wdev = devm_kzalloc(&pdev->dev, sizeof(*wdev), GFP_KERNEL);
+	if (!wdev)
+		return -ENOMEM;
+
+	wdev->omap_wdt_users	= false;
+	wdev->dev		= &pdev->dev;
+	wdev->wdt_trgr_pattern	= 0x1234;
+	mutex_init(&wdev->lock);
+
+	/* reserve static register mappings */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdev->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(wdev->base))
+		return PTR_ERR(wdev->base);
+
+	wdev->wdog.info = &omap_wdt_info;
+	wdev->wdog.ops = &omap_wdt_ops;
+	wdev->wdog.min_timeout = TIMER_MARGIN_MIN;
+	wdev->wdog.max_timeout = TIMER_MARGIN_MAX;
+	wdev->wdog.timeout = TIMER_MARGIN_DEFAULT;
+	wdev->wdog.parent = &pdev->dev;
+
+	watchdog_init_timeout(&wdev->wdog, timer_margin, &pdev->dev);
+
+	watchdog_set_nowayout(&wdev->wdog, nowayout);
+
+	platform_set_drvdata(pdev, wdev);
+
+	pm_runtime_enable(wdev->dev);
+	pm_runtime_get_sync(wdev->dev);
+
+	if (pdata && pdata->read_reset_sources) {
+		u32 rs = pdata->read_reset_sources();
+		if (rs & (1 << OMAP_MPU_WD_RST_SRC_ID_SHIFT))
+			wdev->wdog.bootstatus = WDIOF_CARDRESET;
+	}
+
+	if (early_enable) {
+		omap_wdt_start(&wdev->wdog);
+		set_bit(WDOG_HW_RUNNING, &wdev->wdog.status);
+	} else {
+		omap_wdt_disable(wdev);
+	}
+
+	ret = watchdog_register_device(&wdev->wdog);
+	if (ret) {
+		pm_runtime_disable(wdev->dev);
+		return ret;
+	}
+
+	pr_info("OMAP Watchdog Timer Rev 0x%02x: initial timeout %d sec\n",
+		readl_relaxed(wdev->base + OMAP_WATCHDOG_REV) & 0xFF,
+		wdev->wdog.timeout);
+
+	if (early_enable)
+		omap_wdt_start(&wdev->wdog);
+
+	pm_runtime_put(wdev->dev);
+
+	return 0;
+}
+
+static void omap_wdt_shutdown(struct platform_device *pdev)
+{
+	struct omap_wdt_dev *wdev = platform_get_drvdata(pdev);
+
+	mutex_lock(&wdev->lock);
+	if (wdev->omap_wdt_users) {
+		omap_wdt_disable(wdev);
+		pm_runtime_put_sync(wdev->dev);
+	}
+	mutex_unlock(&wdev->lock);
+}
+
+static int omap_wdt_remove(struct platform_device *pdev)
+{
+	struct omap_wdt_dev *wdev = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(wdev->dev);
+	watchdog_unregister_device(&wdev->wdog);
+
+	return 0;
+}
+
+#ifdef	CONFIG_PM
+
+/* REVISIT ... not clear this is the best way to handle system suspend; and
+ * it's very inappropriate for selective device suspend (e.g. suspending this
+ * through sysfs rather than by stopping the watchdog daemon).  Also, this
+ * may not play well enough with NOWAYOUT...
+ */
+
+static int omap_wdt_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct omap_wdt_dev *wdev = platform_get_drvdata(pdev);
+
+	mutex_lock(&wdev->lock);
+	if (wdev->omap_wdt_users) {
+		omap_wdt_disable(wdev);
+		pm_runtime_put_sync(wdev->dev);
+	}
+	mutex_unlock(&wdev->lock);
+
+	return 0;
+}
+
+static int omap_wdt_resume(struct platform_device *pdev)
+{
+	struct omap_wdt_dev *wdev = platform_get_drvdata(pdev);
+
+	mutex_lock(&wdev->lock);
+	if (wdev->omap_wdt_users) {
+		pm_runtime_get_sync(wdev->dev);
+		omap_wdt_enable(wdev);
+		omap_wdt_reload(wdev);
+	}
+	mutex_unlock(&wdev->lock);
+
+	return 0;
+}
+
+#else
+#define	omap_wdt_suspend	NULL
+#define	omap_wdt_resume		NULL
+#endif
+
+static const struct of_device_id omap_wdt_of_match[] = {
+	{ .compatible = "ti,omap3-wdt", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, omap_wdt_of_match);
+
+static struct platform_driver omap_wdt_driver = {
+	.probe		= omap_wdt_probe,
+	.remove		= omap_wdt_remove,
+	.shutdown	= omap_wdt_shutdown,
+	.suspend	= omap_wdt_suspend,
+	.resume		= omap_wdt_resume,
+	.driver		= {
+		.name	= "omap_wdt",
+		.of_match_table = omap_wdt_of_match,
+	},
+};
+
+module_platform_driver(omap_wdt_driver);
+
+MODULE_AUTHOR("George G. Davis");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:omap_wdt");
diff --git a/drivers/watchdog/omap_wdt.h b/drivers/watchdog/omap_wdt.h
new file mode 100644
index 000000000..42f31ec5e
--- /dev/null
+++ b/drivers/watchdog/omap_wdt.h
@@ -0,0 +1,55 @@
+/*
+ *  linux/drivers/char/watchdog/omap_wdt.h
+ *
+ *  BRIEF MODULE DESCRIPTION
+ *      OMAP Watchdog timer register definitions
+ *
+ *  Copyright (C) 2004 Texas Instruments.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _OMAP_WATCHDOG_H
+#define _OMAP_WATCHDOG_H
+
+#define OMAP_WATCHDOG_REV		(0x00)
+#define OMAP_WATCHDOG_SYS_CONFIG	(0x10)
+#define OMAP_WATCHDOG_STATUS		(0x14)
+#define OMAP_WATCHDOG_CNTRL		(0x24)
+#define OMAP_WATCHDOG_CRR		(0x28)
+#define OMAP_WATCHDOG_LDR		(0x2c)
+#define OMAP_WATCHDOG_TGR		(0x30)
+#define OMAP_WATCHDOG_WPS		(0x34)
+#define OMAP_WATCHDOG_SPR		(0x48)
+
+/* Using the prescaler, the OMAP watchdog could go for many
+ * months before firing.  These limits work without scaling,
+ * with the 60 second default assumed by most tools and docs.
+ */
+#define TIMER_MARGIN_MAX	(24 * 60 * 60)	/* 1 day */
+#define TIMER_MARGIN_DEFAULT	60	/* 60 secs */
+#define TIMER_MARGIN_MIN	1
+
+#define PTV			0	/* prescale */
+#define GET_WLDR_VAL(secs)	(0xffffffff - ((secs) * (32768/(1<<PTV))) + 1)
+#define GET_WCCR_SECS(val)	((0xffffffff - (val) + 1) / (32768/(1<<PTV)))
+
+#endif				/* _OMAP_WATCHDOG_H */
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
new file mode 100644
index 000000000..9db3b09f7
--- /dev/null
+++ b/drivers/watchdog/orion_wdt.c
@@ -0,0 +1,657 @@
+/*
+ * drivers/watchdog/orion_wdt.c
+ *
+ * Watchdog driver for Orion/Kirkwood processors
+ *
+ * Author: Sylver Bruneau <sylver.bruneau@googlemail.com>
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+/* RSTOUT mask register physical address for Orion5x, Kirkwood and Dove */
+#define ORION_RSTOUT_MASK_OFFSET	0x20108
+
+/* Internal registers can be configured at any 1 MiB aligned address */
+#define INTERNAL_REGS_MASK		~(SZ_1M - 1)
+
+/*
+ * Watchdog timer block registers.
+ */
+#define TIMER_CTRL		0x0000
+#define TIMER_A370_STATUS	0x04
+
+#define WDT_MAX_CYCLE_COUNT	0xffffffff
+
+#define WDT_A370_RATIO_MASK(v)	((v) << 16)
+#define WDT_A370_RATIO_SHIFT	5
+#define WDT_A370_RATIO		(1 << WDT_A370_RATIO_SHIFT)
+
+#define WDT_AXP_FIXED_ENABLE_BIT BIT(10)
+#define WDT_A370_EXPIRED	BIT(31)
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static int heartbeat = -1;		/* module parameter (seconds) */
+
+struct orion_watchdog;
+
+struct orion_watchdog_data {
+	int wdt_counter_offset;
+	int wdt_enable_bit;
+	int rstout_enable_bit;
+	int rstout_mask_bit;
+	int (*clock_init)(struct platform_device *,
+			  struct orion_watchdog *);
+	int (*enabled)(struct orion_watchdog *);
+	int (*start)(struct watchdog_device *);
+	int (*stop)(struct watchdog_device *);
+};
+
+struct orion_watchdog {
+	struct watchdog_device wdt;
+	void __iomem *reg;
+	void __iomem *rstout;
+	void __iomem *rstout_mask;
+	unsigned long clk_rate;
+	struct clk *clk;
+	const struct orion_watchdog_data *data;
+};
+
+static int orion_wdt_clock_init(struct platform_device *pdev,
+				struct orion_watchdog *dev)
+{
+	int ret;
+
+	dev->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(dev->clk))
+		return PTR_ERR(dev->clk);
+	ret = clk_prepare_enable(dev->clk);
+	if (ret) {
+		clk_put(dev->clk);
+		return ret;
+	}
+
+	dev->clk_rate = clk_get_rate(dev->clk);
+	return 0;
+}
+
+static int armada370_wdt_clock_init(struct platform_device *pdev,
+				    struct orion_watchdog *dev)
+{
+	int ret;
+
+	dev->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(dev->clk))
+		return PTR_ERR(dev->clk);
+	ret = clk_prepare_enable(dev->clk);
+	if (ret) {
+		clk_put(dev->clk);
+		return ret;
+	}
+
+	/* Setup watchdog input clock */
+	atomic_io_modify(dev->reg + TIMER_CTRL,
+			WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT),
+			WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT));
+
+	dev->clk_rate = clk_get_rate(dev->clk) / WDT_A370_RATIO;
+	return 0;
+}
+
+static int armada375_wdt_clock_init(struct platform_device *pdev,
+				    struct orion_watchdog *dev)
+{
+	int ret;
+
+	dev->clk = of_clk_get_by_name(pdev->dev.of_node, "fixed");
+	if (!IS_ERR(dev->clk)) {
+		ret = clk_prepare_enable(dev->clk);
+		if (ret) {
+			clk_put(dev->clk);
+			return ret;
+		}
+
+		atomic_io_modify(dev->reg + TIMER_CTRL,
+				WDT_AXP_FIXED_ENABLE_BIT,
+				WDT_AXP_FIXED_ENABLE_BIT);
+		dev->clk_rate = clk_get_rate(dev->clk);
+
+		return 0;
+	}
+
+	/* Mandatory fallback for proper devicetree backward compatibility */
+	dev->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(dev->clk))
+		return PTR_ERR(dev->clk);
+
+	ret = clk_prepare_enable(dev->clk);
+	if (ret) {
+		clk_put(dev->clk);
+		return ret;
+	}
+
+	atomic_io_modify(dev->reg + TIMER_CTRL,
+			WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT),
+			WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT));
+	dev->clk_rate = clk_get_rate(dev->clk) / WDT_A370_RATIO;
+
+	return 0;
+}
+
+static int armadaxp_wdt_clock_init(struct platform_device *pdev,
+				   struct orion_watchdog *dev)
+{
+	int ret;
+
+	dev->clk = of_clk_get_by_name(pdev->dev.of_node, "fixed");
+	if (IS_ERR(dev->clk))
+		return PTR_ERR(dev->clk);
+	ret = clk_prepare_enable(dev->clk);
+	if (ret) {
+		clk_put(dev->clk);
+		return ret;
+	}
+
+	/* Enable the fixed watchdog clock input */
+	atomic_io_modify(dev->reg + TIMER_CTRL,
+			 WDT_AXP_FIXED_ENABLE_BIT,
+			 WDT_AXP_FIXED_ENABLE_BIT);
+
+	dev->clk_rate = clk_get_rate(dev->clk);
+	return 0;
+}
+
+static int orion_wdt_ping(struct watchdog_device *wdt_dev)
+{
+	struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+	/* Reload watchdog duration */
+	writel(dev->clk_rate * wdt_dev->timeout,
+	       dev->reg + dev->data->wdt_counter_offset);
+	return 0;
+}
+
+static int armada375_start(struct watchdog_device *wdt_dev)
+{
+	struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+	u32 reg;
+
+	/* Set watchdog duration */
+	writel(dev->clk_rate * wdt_dev->timeout,
+	       dev->reg + dev->data->wdt_counter_offset);
+
+	/* Clear the watchdog expiration bit */
+	atomic_io_modify(dev->reg + TIMER_A370_STATUS, WDT_A370_EXPIRED, 0);
+
+	/* Enable watchdog timer */
+	atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit,
+						dev->data->wdt_enable_bit);
+
+	/* Enable reset on watchdog */
+	reg = readl(dev->rstout);
+	reg |= dev->data->rstout_enable_bit;
+	writel(reg, dev->rstout);
+
+	atomic_io_modify(dev->rstout_mask, dev->data->rstout_mask_bit, 0);
+	return 0;
+}
+
+static int armada370_start(struct watchdog_device *wdt_dev)
+{
+	struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+	u32 reg;
+
+	/* Set watchdog duration */
+	writel(dev->clk_rate * wdt_dev->timeout,
+	       dev->reg + dev->data->wdt_counter_offset);
+
+	/* Clear the watchdog expiration bit */
+	atomic_io_modify(dev->reg + TIMER_A370_STATUS, WDT_A370_EXPIRED, 0);
+
+	/* Enable watchdog timer */
+	atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit,
+						dev->data->wdt_enable_bit);
+
+	/* Enable reset on watchdog */
+	reg = readl(dev->rstout);
+	reg |= dev->data->rstout_enable_bit;
+	writel(reg, dev->rstout);
+	return 0;
+}
+
+static int orion_start(struct watchdog_device *wdt_dev)
+{
+	struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+
+	/* Set watchdog duration */
+	writel(dev->clk_rate * wdt_dev->timeout,
+	       dev->reg + dev->data->wdt_counter_offset);
+
+	/* Enable watchdog timer */
+	atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit,
+						dev->data->wdt_enable_bit);
+
+	/* Enable reset on watchdog */
+	atomic_io_modify(dev->rstout, dev->data->rstout_enable_bit,
+				      dev->data->rstout_enable_bit);
+
+	return 0;
+}
+
+static int orion_wdt_start(struct watchdog_device *wdt_dev)
+{
+	struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+
+	/* There are some per-SoC quirks to handle */
+	return dev->data->start(wdt_dev);
+}
+
+static int orion_stop(struct watchdog_device *wdt_dev)
+{
+	struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+
+	/* Disable reset on watchdog */
+	atomic_io_modify(dev->rstout, dev->data->rstout_enable_bit, 0);
+
+	/* Disable watchdog timer */
+	atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit, 0);
+
+	return 0;
+}
+
+static int armada375_stop(struct watchdog_device *wdt_dev)
+{
+	struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+	u32 reg;
+
+	/* Disable reset on watchdog */
+	atomic_io_modify(dev->rstout_mask, dev->data->rstout_mask_bit,
+					   dev->data->rstout_mask_bit);
+	reg = readl(dev->rstout);
+	reg &= ~dev->data->rstout_enable_bit;
+	writel(reg, dev->rstout);
+
+	/* Disable watchdog timer */
+	atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit, 0);
+
+	return 0;
+}
+
+static int armada370_stop(struct watchdog_device *wdt_dev)
+{
+	struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+	u32 reg;
+
+	/* Disable reset on watchdog */
+	reg = readl(dev->rstout);
+	reg &= ~dev->data->rstout_enable_bit;
+	writel(reg, dev->rstout);
+
+	/* Disable watchdog timer */
+	atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit, 0);
+
+	return 0;
+}
+
+static int orion_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+
+	return dev->data->stop(wdt_dev);
+}
+
+static int orion_enabled(struct orion_watchdog *dev)
+{
+	bool enabled, running;
+
+	enabled = readl(dev->rstout) & dev->data->rstout_enable_bit;
+	running = readl(dev->reg + TIMER_CTRL) & dev->data->wdt_enable_bit;
+
+	return enabled && running;
+}
+
+static int armada375_enabled(struct orion_watchdog *dev)
+{
+	bool masked, enabled, running;
+
+	masked = readl(dev->rstout_mask) & dev->data->rstout_mask_bit;
+	enabled = readl(dev->rstout) & dev->data->rstout_enable_bit;
+	running = readl(dev->reg + TIMER_CTRL) & dev->data->wdt_enable_bit;
+
+	return !masked && enabled && running;
+}
+
+static int orion_wdt_enabled(struct watchdog_device *wdt_dev)
+{
+	struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+
+	return dev->data->enabled(dev);
+}
+
+static unsigned int orion_wdt_get_timeleft(struct watchdog_device *wdt_dev)
+{
+	struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+	return readl(dev->reg + dev->data->wdt_counter_offset) / dev->clk_rate;
+}
+
+static int orion_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				 unsigned int timeout)
+{
+	wdt_dev->timeout = timeout;
+	return 0;
+}
+
+static const struct watchdog_info orion_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "Orion Watchdog",
+};
+
+static const struct watchdog_ops orion_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = orion_wdt_start,
+	.stop = orion_wdt_stop,
+	.ping = orion_wdt_ping,
+	.set_timeout = orion_wdt_set_timeout,
+	.get_timeleft = orion_wdt_get_timeleft,
+};
+
+static irqreturn_t orion_wdt_irq(int irq, void *devid)
+{
+	panic("Watchdog Timeout");
+	return IRQ_HANDLED;
+}
+
+/*
+ * The original devicetree binding for this driver specified only
+ * one memory resource, so in order to keep DT backwards compatibility
+ * we try to fallback to a hardcoded register address, if the resource
+ * is missing from the devicetree.
+ */
+static void __iomem *orion_wdt_ioremap_rstout(struct platform_device *pdev,
+					      phys_addr_t internal_regs)
+{
+	struct resource *res;
+	phys_addr_t rstout;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res)
+		return devm_ioremap(&pdev->dev, res->start,
+				    resource_size(res));
+
+	rstout = internal_regs + ORION_RSTOUT_MASK_OFFSET;
+
+	WARN(1, FW_BUG "falling back to hardcoded RSTOUT reg %pa\n", &rstout);
+	return devm_ioremap(&pdev->dev, rstout, 0x4);
+}
+
+static const struct orion_watchdog_data orion_data = {
+	.rstout_enable_bit = BIT(1),
+	.wdt_enable_bit = BIT(4),
+	.wdt_counter_offset = 0x24,
+	.clock_init = orion_wdt_clock_init,
+	.enabled = orion_enabled,
+	.start = orion_start,
+	.stop = orion_stop,
+};
+
+static const struct orion_watchdog_data armada370_data = {
+	.rstout_enable_bit = BIT(8),
+	.wdt_enable_bit = BIT(8),
+	.wdt_counter_offset = 0x34,
+	.clock_init = armada370_wdt_clock_init,
+	.enabled = orion_enabled,
+	.start = armada370_start,
+	.stop = armada370_stop,
+};
+
+static const struct orion_watchdog_data armadaxp_data = {
+	.rstout_enable_bit = BIT(8),
+	.wdt_enable_bit = BIT(8),
+	.wdt_counter_offset = 0x34,
+	.clock_init = armadaxp_wdt_clock_init,
+	.enabled = orion_enabled,
+	.start = armada370_start,
+	.stop = armada370_stop,
+};
+
+static const struct orion_watchdog_data armada375_data = {
+	.rstout_enable_bit = BIT(8),
+	.rstout_mask_bit = BIT(10),
+	.wdt_enable_bit = BIT(8),
+	.wdt_counter_offset = 0x34,
+	.clock_init = armada375_wdt_clock_init,
+	.enabled = armada375_enabled,
+	.start = armada375_start,
+	.stop = armada375_stop,
+};
+
+static const struct orion_watchdog_data armada380_data = {
+	.rstout_enable_bit = BIT(8),
+	.rstout_mask_bit = BIT(10),
+	.wdt_enable_bit = BIT(8),
+	.wdt_counter_offset = 0x34,
+	.clock_init = armadaxp_wdt_clock_init,
+	.enabled = armada375_enabled,
+	.start = armada375_start,
+	.stop = armada375_stop,
+};
+
+static const struct of_device_id orion_wdt_of_match_table[] = {
+	{
+		.compatible = "marvell,orion-wdt",
+		.data = &orion_data,
+	},
+	{
+		.compatible = "marvell,armada-370-wdt",
+		.data = &armada370_data,
+	},
+	{
+		.compatible = "marvell,armada-xp-wdt",
+		.data = &armadaxp_data,
+	},
+	{
+		.compatible = "marvell,armada-375-wdt",
+		.data = &armada375_data,
+	},
+	{
+		.compatible = "marvell,armada-380-wdt",
+		.data = &armada380_data,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, orion_wdt_of_match_table);
+
+static int orion_wdt_get_regs(struct platform_device *pdev,
+			      struct orion_watchdog *dev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+	dev->reg = devm_ioremap(&pdev->dev, res->start,
+				resource_size(res));
+	if (!dev->reg)
+		return -ENOMEM;
+
+	/* Each supported compatible has some RSTOUT register quirk */
+	if (of_device_is_compatible(node, "marvell,orion-wdt")) {
+
+		dev->rstout = orion_wdt_ioremap_rstout(pdev, res->start &
+						       INTERNAL_REGS_MASK);
+		if (!dev->rstout)
+			return -ENODEV;
+
+	} else if (of_device_is_compatible(node, "marvell,armada-370-wdt") ||
+		   of_device_is_compatible(node, "marvell,armada-xp-wdt")) {
+
+		/* Dedicated RSTOUT register, can be requested. */
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		dev->rstout = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(dev->rstout))
+			return PTR_ERR(dev->rstout);
+
+	} else if (of_device_is_compatible(node, "marvell,armada-375-wdt") ||
+		   of_device_is_compatible(node, "marvell,armada-380-wdt")) {
+
+		/* Dedicated RSTOUT register, can be requested. */
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		dev->rstout = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(dev->rstout))
+			return PTR_ERR(dev->rstout);
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+		if (!res)
+			return -ENODEV;
+		dev->rstout_mask = devm_ioremap(&pdev->dev, res->start,
+						resource_size(res));
+		if (!dev->rstout_mask)
+			return -ENOMEM;
+
+	} else {
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int orion_wdt_probe(struct platform_device *pdev)
+{
+	struct orion_watchdog *dev;
+	const struct of_device_id *match;
+	unsigned int wdt_max_duration;	/* (seconds) */
+	int ret, irq;
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(struct orion_watchdog),
+			   GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	match = of_match_device(orion_wdt_of_match_table, &pdev->dev);
+	if (!match)
+		/* Default legacy match */
+		match = &orion_wdt_of_match_table[0];
+
+	dev->wdt.info = &orion_wdt_info;
+	dev->wdt.ops = &orion_wdt_ops;
+	dev->wdt.min_timeout = 1;
+	dev->data = match->data;
+
+	ret = orion_wdt_get_regs(pdev, dev);
+	if (ret)
+		return ret;
+
+	ret = dev->data->clock_init(pdev, dev);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot initialize clock\n");
+		return ret;
+	}
+
+	wdt_max_duration = WDT_MAX_CYCLE_COUNT / dev->clk_rate;
+
+	dev->wdt.timeout = wdt_max_duration;
+	dev->wdt.max_timeout = wdt_max_duration;
+	dev->wdt.parent = &pdev->dev;
+	watchdog_init_timeout(&dev->wdt, heartbeat, &pdev->dev);
+
+	platform_set_drvdata(pdev, &dev->wdt);
+	watchdog_set_drvdata(&dev->wdt, dev);
+
+	/*
+	 * Let's make sure the watchdog is fully stopped, unless it's
+	 * explicitly enabled. This may be the case if the module was
+	 * removed and re-inserted, or if the bootloader explicitly
+	 * set a running watchdog before booting the kernel.
+	 */
+	if (!orion_wdt_enabled(&dev->wdt))
+		orion_wdt_stop(&dev->wdt);
+	else
+		set_bit(WDOG_HW_RUNNING, &dev->wdt.status);
+
+	/* Request the IRQ only after the watchdog is disabled */
+	irq = platform_get_irq(pdev, 0);
+	if (irq > 0) {
+		/*
+		 * Not all supported platforms specify an interrupt for the
+		 * watchdog, so let's make it optional.
+		 */
+		ret = devm_request_irq(&pdev->dev, irq, orion_wdt_irq, 0,
+				       pdev->name, dev);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "failed to request IRQ\n");
+			goto disable_clk;
+		}
+	}
+
+	watchdog_set_nowayout(&dev->wdt, nowayout);
+	ret = watchdog_register_device(&dev->wdt);
+	if (ret)
+		goto disable_clk;
+
+	pr_info("Initial timeout %d sec%s\n",
+		dev->wdt.timeout, nowayout ? ", nowayout" : "");
+	return 0;
+
+disable_clk:
+	clk_disable_unprepare(dev->clk);
+	clk_put(dev->clk);
+	return ret;
+}
+
+static int orion_wdt_remove(struct platform_device *pdev)
+{
+	struct watchdog_device *wdt_dev = platform_get_drvdata(pdev);
+	struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+
+	watchdog_unregister_device(wdt_dev);
+	clk_disable_unprepare(dev->clk);
+	clk_put(dev->clk);
+	return 0;
+}
+
+static void orion_wdt_shutdown(struct platform_device *pdev)
+{
+	struct watchdog_device *wdt_dev = platform_get_drvdata(pdev);
+	orion_wdt_stop(wdt_dev);
+}
+
+static struct platform_driver orion_wdt_driver = {
+	.probe		= orion_wdt_probe,
+	.remove		= orion_wdt_remove,
+	.shutdown	= orion_wdt_shutdown,
+	.driver		= {
+		.name	= "orion_wdt",
+		.of_match_table = orion_wdt_of_match_table,
+	},
+};
+
+module_platform_driver(orion_wdt_driver);
+
+MODULE_AUTHOR("Sylver Bruneau <sylver.bruneau@googlemail.com>");
+MODULE_DESCRIPTION("Orion Processor Watchdog");
+
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:orion_wdt");
diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c
new file mode 100644
index 000000000..06a892e36
--- /dev/null
+++ b/drivers/watchdog/pc87413_wdt.c
@@ -0,0 +1,595 @@
+/*
+ *      NS pc87413-wdt Watchdog Timer driver for Linux 2.6.x.x
+ *
+ *      This code is based on wdt.c with original copyright.
+ *
+ *      (C) Copyright 2006 Sven Anders, <anders@anduras.de>
+ *                     and Marcus Junker, <junker@anduras.de>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ *      Neither Sven Anders, Marcus Junker nor ANDURAS AG
+ *      admit liability nor provide warranty for any of this software.
+ *      This material is provided "AS-IS" and at no charge.
+ *
+ *      Release 1.1
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/notifier.h>
+#include <linux/fs.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/moduleparam.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+
+/* #define DEBUG 1 */
+
+#define DEFAULT_TIMEOUT     1		/* 1 minute */
+#define MAX_TIMEOUT         255
+
+#define VERSION             "1.1"
+#define MODNAME             "pc87413 WDT"
+#define DPFX                MODNAME " - DEBUG: "
+
+#define WDT_INDEX_IO_PORT   (io+0)	/* I/O port base (index register) */
+#define WDT_DATA_IO_PORT    (WDT_INDEX_IO_PORT+1)
+#define SWC_LDN             0x04
+#define SIOCFG2             0x22	/* Serial IO register */
+#define WDCTL               0x10	/* Watchdog-Timer-Control-Register */
+#define WDTO                0x11	/* Watchdog timeout register */
+#define WDCFG               0x12	/* Watchdog config register */
+
+#define IO_DEFAULT	0x2E		/* Address used on Portwell Boards */
+
+static int io = IO_DEFAULT;
+static int swc_base_addr = -1;
+
+static int timeout = DEFAULT_TIMEOUT;	/* timeout value */
+static unsigned long timer_enabled;	/* is the timer enabled? */
+
+static char expect_close;		/* is the close expected? */
+
+static DEFINE_SPINLOCK(io_lock);	/* to guard us from io races */
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+/* -- Low level function ----------------------------------------*/
+
+/* Select pins for Watchdog output */
+
+static inline void pc87413_select_wdt_out(void)
+{
+	unsigned int cr_data = 0;
+
+	/* Step 1: Select multiple pin,pin55,as WDT output */
+
+	outb_p(SIOCFG2, WDT_INDEX_IO_PORT);
+
+	cr_data = inb(WDT_DATA_IO_PORT);
+
+	cr_data |= 0x80; /* Set Bit7 to 1*/
+	outb_p(SIOCFG2, WDT_INDEX_IO_PORT);
+
+	outb_p(cr_data, WDT_DATA_IO_PORT);
+
+#ifdef DEBUG
+	pr_info(DPFX
+		"Select multiple pin,pin55,as WDT output: Bit7 to 1: %d\n",
+								cr_data);
+#endif
+}
+
+/* Enable SWC functions */
+
+static inline void pc87413_enable_swc(void)
+{
+	unsigned int cr_data = 0;
+
+	/* Step 2: Enable SWC functions */
+
+	outb_p(0x07, WDT_INDEX_IO_PORT);	/* Point SWC_LDN (LDN=4) */
+	outb_p(SWC_LDN, WDT_DATA_IO_PORT);
+
+	outb_p(0x30, WDT_INDEX_IO_PORT);	/* Read Index 0x30 First */
+	cr_data = inb(WDT_DATA_IO_PORT);
+	cr_data |= 0x01;			/* Set Bit0 to 1 */
+	outb_p(0x30, WDT_INDEX_IO_PORT);
+	outb_p(cr_data, WDT_DATA_IO_PORT);	/* Index0x30_bit0P1 */
+
+#ifdef DEBUG
+	pr_info(DPFX "pc87413 - Enable SWC functions\n");
+#endif
+}
+
+/* Read SWC I/O base address */
+
+static void pc87413_get_swc_base_addr(void)
+{
+	unsigned char addr_l, addr_h = 0;
+
+	/* Step 3: Read SWC I/O Base Address */
+
+	outb_p(0x60, WDT_INDEX_IO_PORT);	/* Read Index 0x60 */
+	addr_h = inb(WDT_DATA_IO_PORT);
+
+	outb_p(0x61, WDT_INDEX_IO_PORT);	/* Read Index 0x61 */
+
+	addr_l = inb(WDT_DATA_IO_PORT);
+
+	swc_base_addr = (addr_h << 8) + addr_l;
+#ifdef DEBUG
+	pr_info(DPFX
+		"Read SWC I/O Base Address: low %d, high %d, res %d\n",
+						addr_l, addr_h, swc_base_addr);
+#endif
+}
+
+/* Select Bank 3 of SWC */
+
+static inline void pc87413_swc_bank3(void)
+{
+	/* Step 4: Select Bank3 of SWC */
+	outb_p(inb(swc_base_addr + 0x0f) | 0x03, swc_base_addr + 0x0f);
+#ifdef DEBUG
+	pr_info(DPFX "Select Bank3 of SWC\n");
+#endif
+}
+
+/* Set watchdog timeout to x minutes */
+
+static inline void pc87413_programm_wdto(char pc87413_time)
+{
+	/* Step 5: Programm WDTO, Twd. */
+	outb_p(pc87413_time, swc_base_addr + WDTO);
+#ifdef DEBUG
+	pr_info(DPFX "Set WDTO to %d minutes\n", pc87413_time);
+#endif
+}
+
+/* Enable WDEN */
+
+static inline void pc87413_enable_wden(void)
+{
+	/* Step 6: Enable WDEN */
+	outb_p(inb(swc_base_addr + WDCTL) | 0x01, swc_base_addr + WDCTL);
+#ifdef DEBUG
+	pr_info(DPFX "Enable WDEN\n");
+#endif
+}
+
+/* Enable SW_WD_TREN */
+static inline void pc87413_enable_sw_wd_tren(void)
+{
+	/* Enable SW_WD_TREN */
+	outb_p(inb(swc_base_addr + WDCFG) | 0x80, swc_base_addr + WDCFG);
+#ifdef DEBUG
+	pr_info(DPFX "Enable SW_WD_TREN\n");
+#endif
+}
+
+/* Disable SW_WD_TREN */
+
+static inline void pc87413_disable_sw_wd_tren(void)
+{
+	/* Disable SW_WD_TREN */
+	outb_p(inb(swc_base_addr + WDCFG) & 0x7f, swc_base_addr + WDCFG);
+#ifdef DEBUG
+	pr_info(DPFX "pc87413 - Disable SW_WD_TREN\n");
+#endif
+}
+
+/* Enable SW_WD_TRG */
+
+static inline void pc87413_enable_sw_wd_trg(void)
+{
+	/* Enable SW_WD_TRG */
+	outb_p(inb(swc_base_addr + WDCTL) | 0x80, swc_base_addr + WDCTL);
+#ifdef DEBUG
+	pr_info(DPFX "pc87413 - Enable SW_WD_TRG\n");
+#endif
+}
+
+/* Disable SW_WD_TRG */
+
+static inline void pc87413_disable_sw_wd_trg(void)
+{
+	/* Disable SW_WD_TRG */
+	outb_p(inb(swc_base_addr + WDCTL) & 0x7f, swc_base_addr + WDCTL);
+#ifdef DEBUG
+	pr_info(DPFX "Disable SW_WD_TRG\n");
+#endif
+}
+
+/* -- Higher level functions ------------------------------------*/
+
+/* Enable the watchdog */
+
+static void pc87413_enable(void)
+{
+	spin_lock(&io_lock);
+
+	pc87413_swc_bank3();
+	pc87413_programm_wdto(timeout);
+	pc87413_enable_wden();
+	pc87413_enable_sw_wd_tren();
+	pc87413_enable_sw_wd_trg();
+
+	spin_unlock(&io_lock);
+}
+
+/* Disable the watchdog */
+
+static void pc87413_disable(void)
+{
+	spin_lock(&io_lock);
+
+	pc87413_swc_bank3();
+	pc87413_disable_sw_wd_tren();
+	pc87413_disable_sw_wd_trg();
+	pc87413_programm_wdto(0);
+
+	spin_unlock(&io_lock);
+}
+
+/* Refresh the watchdog */
+
+static void pc87413_refresh(void)
+{
+	spin_lock(&io_lock);
+
+	pc87413_swc_bank3();
+	pc87413_disable_sw_wd_tren();
+	pc87413_disable_sw_wd_trg();
+	pc87413_programm_wdto(timeout);
+	pc87413_enable_wden();
+	pc87413_enable_sw_wd_tren();
+	pc87413_enable_sw_wd_trg();
+
+	spin_unlock(&io_lock);
+}
+
+/* -- File operations -------------------------------------------*/
+
+/**
+ *	pc87413_open:
+ *	@inode: inode of device
+ *	@file: file handle to device
+ *
+ */
+
+static int pc87413_open(struct inode *inode, struct file *file)
+{
+	/* /dev/watchdog can only be opened once */
+
+	if (test_and_set_bit(0, &timer_enabled))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	/* Reload and activate timer */
+	pc87413_refresh();
+
+	pr_info("Watchdog enabled. Timeout set to %d minute(s).\n", timeout);
+
+	return nonseekable_open(inode, file);
+}
+
+/**
+ *	pc87413_release:
+ *	@inode: inode to board
+ *	@file: file handle to board
+ *
+ *	The watchdog has a configurable API. There is a religious dispute
+ *	between people who want their watchdog to be able to shut down and
+ *	those who want to be sure if the watchdog manager dies the machine
+ *	reboots. In the former case we disable the counters, in the latter
+ *	case you have to open it again very soon.
+ */
+
+static int pc87413_release(struct inode *inode, struct file *file)
+{
+	/* Shut off the timer. */
+
+	if (expect_close == 42) {
+		pc87413_disable();
+		pr_info("Watchdog disabled, sleeping again...\n");
+	} else {
+		pr_crit("Unexpected close, not stopping watchdog!\n");
+		pc87413_refresh();
+	}
+	clear_bit(0, &timer_enabled);
+	expect_close = 0;
+	return 0;
+}
+
+/**
+ *	pc87413_status:
+ *
+ *      return, if the watchdog is enabled (timeout is set...)
+ */
+
+
+static int pc87413_status(void)
+{
+	  return 0; /* currently not supported */
+}
+
+/**
+ *	pc87413_write:
+ *	@file: file handle to the watchdog
+ *	@data: data buffer to write
+ *	@len: length in bytes
+ *	@ppos: pointer to the position to write. No seeks allowed
+ *
+ *	A write to a watchdog device is defined as a keepalive signal. Any
+ *	write of data will do, as we we don't define content meaning.
+ */
+
+static ssize_t pc87413_write(struct file *file, const char __user *data,
+			     size_t len, loff_t *ppos)
+{
+	/* See if we got the magic character 'V' and reload the timer */
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			/* reset expect flag */
+			expect_close = 0;
+
+			/* scan to see whether or not we got the
+			   magic character */
+			for (i = 0; i != len; i++) {
+				char c;
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+
+		/* someone wrote to us, we should reload the timer */
+		pc87413_refresh();
+	}
+	return len;
+}
+
+/**
+ *	pc87413_ioctl:
+ *	@file: file handle to the device
+ *	@cmd: watchdog command
+ *	@arg: argument pointer
+ *
+ *	The watchdog API defines a common set of functions for all watchdogs
+ *	according to their available features. We only actually usefully support
+ *	querying capabilities and current status.
+ */
+
+static long pc87413_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
+{
+	int new_timeout;
+
+	union {
+		struct watchdog_info __user *ident;
+		int __user *i;
+	} uarg;
+
+	static const struct watchdog_info ident = {
+		.options          = WDIOF_KEEPALIVEPING |
+				    WDIOF_SETTIMEOUT |
+				    WDIOF_MAGICCLOSE,
+		.firmware_version = 1,
+		.identity         = "PC87413(HF/F) watchdog",
+	};
+
+	uarg.i = (int __user *)arg;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(uarg.ident, &ident,
+					sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+		return put_user(pc87413_status(), uarg.i);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, uarg.i);
+	case WDIOC_SETOPTIONS:
+	{
+		int options, retval = -EINVAL;
+		if (get_user(options, uarg.i))
+			return -EFAULT;
+		if (options & WDIOS_DISABLECARD) {
+			pc87413_disable();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			pc87413_enable();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		pc87413_refresh();
+#ifdef DEBUG
+		pr_info(DPFX "keepalive\n");
+#endif
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, uarg.i))
+			return -EFAULT;
+		/* the API states this is given in secs */
+		new_timeout /= 60;
+		if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
+			return -EINVAL;
+		timeout = new_timeout;
+		pc87413_refresh();
+		/* fall through and return the new timeout... */
+	case WDIOC_GETTIMEOUT:
+		new_timeout = timeout * 60;
+		return put_user(new_timeout, uarg.i);
+	default:
+		return -ENOTTY;
+	}
+}
+
+/* -- Notifier funtions -----------------------------------------*/
+
+/**
+ *	notify_sys:
+ *	@this: our notifier block
+ *	@code: the event being reported
+ *	@unused: unused
+ *
+ *	Our notifier is called on system shutdowns. We want to turn the card
+ *	off at reboot otherwise the machine will reboot again during memory
+ *	test or worse yet during the following fsck. This would suck, in fact
+ *	trust me - if it happens it does suck.
+ */
+
+static int pc87413_notify_sys(struct notifier_block *this,
+			      unsigned long code,
+			      void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		/* Turn the card off */
+		pc87413_disable();
+	return NOTIFY_DONE;
+}
+
+/* -- Module's structures ---------------------------------------*/
+
+static const struct file_operations pc87413_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= pc87413_write,
+	.unlocked_ioctl	= pc87413_ioctl,
+	.open		= pc87413_open,
+	.release	= pc87413_release,
+};
+
+static struct notifier_block pc87413_notifier = {
+	.notifier_call  = pc87413_notify_sys,
+};
+
+static struct miscdevice pc87413_miscdev = {
+	.minor          = WATCHDOG_MINOR,
+	.name           = "watchdog",
+	.fops           = &pc87413_fops,
+};
+
+/* -- Module init functions -------------------------------------*/
+
+/**
+ *	pc87413_init: module's "constructor"
+ *
+ *	Set up the WDT watchdog board. All we have to do is grab the
+ *	resources we require and bitch if anyone beat us to them.
+ *	The open() function will actually kick the board off.
+ */
+
+static int __init pc87413_init(void)
+{
+	int ret;
+
+	pr_info("Version " VERSION " at io 0x%X\n",
+							WDT_INDEX_IO_PORT);
+
+	if (!request_muxed_region(io, 2, MODNAME))
+		return -EBUSY;
+
+	ret = register_reboot_notifier(&pc87413_notifier);
+	if (ret != 0)
+		pr_err("cannot register reboot notifier (err=%d)\n", ret);
+
+	ret = misc_register(&pc87413_miscdev);
+	if (ret != 0) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, ret);
+		goto reboot_unreg;
+	}
+	pr_info("initialized. timeout=%d min\n", timeout);
+
+	pc87413_select_wdt_out();
+	pc87413_enable_swc();
+	pc87413_get_swc_base_addr();
+
+	if (!request_region(swc_base_addr, 0x20, MODNAME)) {
+		pr_err("cannot request SWC region at 0x%x\n", swc_base_addr);
+		ret = -EBUSY;
+		goto misc_unreg;
+	}
+
+	pc87413_enable();
+
+	release_region(io, 2);
+	return 0;
+
+misc_unreg:
+	misc_deregister(&pc87413_miscdev);
+reboot_unreg:
+	unregister_reboot_notifier(&pc87413_notifier);
+	release_region(io, 2);
+	return ret;
+}
+
+/**
+ *	pc87413_exit: module's "destructor"
+ *
+ *	Unload the watchdog. You cannot do this with any file handles open.
+ *	If your watchdog is set to continue ticking on close and you unload
+ *	it, well it keeps ticking. We won't get the interrupt but the board
+ *	will not touch PC memory so all is fine. You just have to load a new
+ *	module in 60 seconds or reboot.
+ */
+
+static void __exit pc87413_exit(void)
+{
+	/* Stop the timer before we leave */
+	if (!nowayout) {
+		pc87413_disable();
+		pr_info("Watchdog disabled\n");
+	}
+
+	misc_deregister(&pc87413_miscdev);
+	unregister_reboot_notifier(&pc87413_notifier);
+	release_region(swc_base_addr, 0x20);
+
+	pr_info("watchdog component driver removed\n");
+}
+
+module_init(pc87413_init);
+module_exit(pc87413_exit);
+
+MODULE_AUTHOR("Sven Anders <anders@anduras.de>");
+MODULE_AUTHOR("Marcus Junker <junker@anduras.de>");
+MODULE_DESCRIPTION("PC87413 WDT driver");
+MODULE_LICENSE("GPL");
+
+module_param_hw(io, int, ioport, 0);
+MODULE_PARM_DESC(io, MODNAME " I/O port (default: "
+					__MODULE_STRING(IO_DEFAULT) ").");
+
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+		"Watchdog timeout in minutes (default="
+				__MODULE_STRING(DEFAULT_TIMEOUT) ").");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c
new file mode 100644
index 000000000..b72ce68ea
--- /dev/null
+++ b/drivers/watchdog/pcwd.c
@@ -0,0 +1,1001 @@
+/*
+ * PC Watchdog Driver
+ * by Ken Hollis (khollis@bitgate.com)
+ *
+ * Permission granted from Simon Machell (smachell@berkprod.com)
+ * Written for the Linux Kernel, and GPLed by Ken Hollis
+ *
+ * 960107	Added request_region routines, modulized the whole thing.
+ * 960108	Fixed end-of-file pointer (Thanks to Dan Hollis), added
+ *		WD_TIMEOUT define.
+ * 960216	Added eof marker on the file, and changed verbose messages.
+ * 960716	Made functional and cosmetic changes to the source for
+ *		inclusion in Linux 2.0.x kernels, thanks to Alan Cox.
+ * 960717	Removed read/seek routines, replaced with ioctl.  Also, added
+ *		check_region command due to Alan's suggestion.
+ * 960821	Made changes to compile in newer 2.0.x kernels.  Added
+ *		"cold reboot sense" entry.
+ * 960825	Made a few changes to code, deleted some defines and made
+ *		typedefs to replace them.  Made heartbeat reset only available
+ *		via ioctl, and removed the write routine.
+ * 960828	Added new items for PC Watchdog Rev.C card.
+ * 960829	Changed around all of the IOCTLs, added new features,
+ *		added watchdog disable/re-enable routines.  Added firmware
+ *		version reporting.  Added read routine for temperature.
+ *		Removed some extra defines, added an autodetect Revision
+ *		routine.
+ * 961006	Revised some documentation, fixed some cosmetic bugs.  Made
+ *		drivers to panic the system if it's overheating at bootup.
+ * 961118	Changed some verbiage on some of the output, tidied up
+ *		code bits, and added compatibility to 2.1.x.
+ * 970912	Enabled board on open and disable on close.
+ * 971107	Took account of recent VFS changes (broke read).
+ * 971210	Disable board on initialisation in case board already ticking.
+ * 971222	Changed open/close for temperature handling
+ *		Michael Meskes <meskes@debian.org>.
+ * 980112	Used minor numbers from include/linux/miscdevice.h
+ * 990403	Clear reset status after reading control status register in
+ *		pcwd_showprevstate(). [Marc Boucher <marc@mbsi.ca>]
+ * 990605	Made changes to code to support Firmware 1.22a, added
+ *		fairly useless proc entry.
+ * 990610	removed said useless proc code for the merge <alan>
+ * 000403	Removed last traces of proc code. <davej>
+ * 011214	Added nowayout module option to override
+ *		CONFIG_WATCHDOG_NOWAYOUT <Matt_Domsch@dell.com>
+ *		Added timeout module option to override default
+ */
+
+/*
+ *	A bells and whistles driver is available from http://www.pcwd.de/
+ *	More info available at http://www.berkprod.com/ or
+ *	http://www.pcwatchdog.com/
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>	/* For module specific items */
+#include <linux/moduleparam.h>	/* For new moduleparam's */
+#include <linux/types.h>	/* For standard types (like size_t) */
+#include <linux/errno.h>	/* For the -ENODEV/... values */
+#include <linux/kernel.h>	/* For printk/panic/... */
+#include <linux/delay.h>	/* For mdelay function */
+#include <linux/timer.h>	/* For timer related operations */
+#include <linux/jiffies.h>	/* For jiffies stuff */
+#include <linux/miscdevice.h>	/* For struct miscdevice */
+#include <linux/watchdog.h>	/* For the watchdog specific items */
+#include <linux/reboot.h>	/* For kernel_power_off() */
+#include <linux/init.h>		/* For __init/__exit/... */
+#include <linux/fs.h>		/* For file operations */
+#include <linux/isa.h>		/* For isa devices */
+#include <linux/ioport.h>	/* For io-port access */
+#include <linux/spinlock.h>	/* For spin_lock/spin_unlock/... */
+#include <linux/uaccess.h>	/* For copy_to_user/put_user/... */
+#include <linux/io.h>		/* For inb/outb/... */
+
+/* Module and version information */
+#define WATCHDOG_VERSION "1.20"
+#define WATCHDOG_DATE "18 Feb 2007"
+#define WATCHDOG_DRIVER_NAME "ISA-PC Watchdog"
+#define WATCHDOG_NAME "pcwd"
+#define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION "\n"
+
+/*
+ * It should be noted that PCWD_REVISION_B was removed because A and B
+ * are essentially the same types of card, with the exception that B
+ * has temperature reporting.  Since I didn't receive a Rev.B card,
+ * the Rev.B card is not supported.  (It's a good thing too, as they
+ * are no longer in production.)
+ */
+#define	PCWD_REVISION_A		1
+#define	PCWD_REVISION_C		2
+
+/*
+ * These are the auto-probe addresses available.
+ *
+ * Revision A only uses ports 0x270 and 0x370.  Revision C introduced 0x350.
+ * Revision A has an address range of 2 addresses, while Revision C has 4.
+ */
+#define PCWD_ISA_NR_CARDS	3
+static int pcwd_ioports[] = { 0x270, 0x350, 0x370, 0x000 };
+
+/*
+ * These are the defines that describe the control status bits for the
+ * PCI-PC Watchdog card.
+*/
+/* Port 1 : Control Status #1 for the PC Watchdog card, revision A. */
+#define WD_WDRST		0x01	/* Previously reset state */
+#define WD_T110			0x02	/* Temperature overheat sense */
+#define WD_HRTBT		0x04	/* Heartbeat sense */
+#define WD_RLY2			0x08	/* External relay triggered */
+#define WD_SRLY2		0x80	/* Software external relay triggered */
+/* Port 1 : Control Status #1 for the PC Watchdog card, revision C. */
+#define WD_REVC_WTRP		0x01	/* Watchdog Trip status */
+#define WD_REVC_HRBT		0x02	/* Watchdog Heartbeat */
+#define WD_REVC_TTRP		0x04	/* Temperature Trip status */
+#define WD_REVC_RL2A		0x08	/* Relay 2 activated by
+							on-board processor */
+#define WD_REVC_RL1A		0x10	/* Relay 1 active */
+#define WD_REVC_R2DS		0x40	/* Relay 2 disable */
+#define WD_REVC_RLY2		0x80	/* Relay 2 activated? */
+/* Port 2 : Control Status #2 */
+#define WD_WDIS			0x10	/* Watchdog Disabled */
+#define WD_ENTP			0x20	/* Watchdog Enable Temperature Trip */
+#define WD_SSEL			0x40	/* Watchdog Switch Select
+							(1:SW1 <-> 0:SW2) */
+#define WD_WCMD			0x80	/* Watchdog Command Mode */
+
+/* max. time we give an ISA watchdog card to process a command */
+/* 500ms for each 4 bit response (according to spec.) */
+#define ISA_COMMAND_TIMEOUT     1000
+
+/* Watchdog's internal commands */
+#define CMD_ISA_IDLE			0x00
+#define CMD_ISA_VERSION_INTEGER		0x01
+#define CMD_ISA_VERSION_TENTH		0x02
+#define CMD_ISA_VERSION_HUNDRETH	0x03
+#define CMD_ISA_VERSION_MINOR		0x04
+#define CMD_ISA_SWITCH_SETTINGS		0x05
+#define CMD_ISA_RESET_PC		0x06
+#define CMD_ISA_ARM_0			0x07
+#define CMD_ISA_ARM_30			0x08
+#define CMD_ISA_ARM_60			0x09
+#define CMD_ISA_DELAY_TIME_2SECS	0x0A
+#define CMD_ISA_DELAY_TIME_4SECS	0x0B
+#define CMD_ISA_DELAY_TIME_8SECS	0x0C
+#define CMD_ISA_RESET_RELAYS		0x0D
+
+/* Watchdog's Dip Switch heartbeat values */
+static const int heartbeat_tbl[] = {
+	20,	/* OFF-OFF-OFF	= 20 Sec  */
+	40,	/* OFF-OFF-ON	= 40 Sec  */
+	60,	/* OFF-ON-OFF	=  1 Min  */
+	300,	/* OFF-ON-ON	=  5 Min  */
+	600,	/* ON-OFF-OFF	= 10 Min  */
+	1800,	/* ON-OFF-ON	= 30 Min  */
+	3600,	/* ON-ON-OFF	=  1 Hour */
+	7200,	/* ON-ON-ON	=  2 hour */
+};
+
+/*
+ * We are using an kernel timer to do the pinging of the watchdog
+ * every ~500ms. We try to set the internal heartbeat of the
+ * watchdog to 2 ms.
+ */
+
+#define WDT_INTERVAL (HZ/2+1)
+
+/* We can only use 1 card due to the /dev/watchdog restriction */
+static int cards_found;
+
+/* internal variables */
+static unsigned long open_allowed;
+static char expect_close;
+static int temp_panic;
+
+/* this is private data for each ISA-PC watchdog card */
+static struct {
+	char fw_ver_str[6];		/* The cards firmware version */
+	int revision;			/* The card's revision */
+	int supports_temp;		/* Whether or not the card has
+						a temperature device */
+	int command_mode;		/* Whether or not the card is in
+						command mode */
+	int boot_status;		/* The card's boot status */
+	int io_addr;			/* The cards I/O address */
+	spinlock_t io_lock;		/* the lock for io operations */
+	struct timer_list timer;	/* The timer that pings the watchdog */
+	unsigned long next_heartbeat;	/* the next_heartbeat for the timer */
+} pcwd_private;
+
+/* module parameters */
+#define QUIET	0	/* Default */
+#define VERBOSE	1	/* Verbose */
+#define DEBUG	2	/* print fancy stuff too */
+static int debug = QUIET;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug,
+		"Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)");
+
+/* default heartbeat = delay-time from dip-switches */
+#define WATCHDOG_HEARTBEAT 0
+static int heartbeat = WATCHDOG_HEARTBEAT;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. "
+	"(2 <= heartbeat <= 7200 or 0=delay-time from dip-switches, default="
+				__MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/*
+ *	Internal functions
+ */
+
+static int send_isa_command(int cmd)
+{
+	int i;
+	int control_status;
+	int port0, last_port0;	/* Double read for stabilising */
+
+	if (debug >= DEBUG)
+		pr_debug("sending following data cmd=0x%02x\n", cmd);
+
+	/* The WCMD bit must be 1 and the command is only 4 bits in size */
+	control_status = (cmd & 0x0F) | WD_WCMD;
+	outb_p(control_status, pcwd_private.io_addr + 2);
+	udelay(ISA_COMMAND_TIMEOUT);
+
+	port0 = inb_p(pcwd_private.io_addr);
+	for (i = 0; i < 25; ++i) {
+		last_port0 = port0;
+		port0 = inb_p(pcwd_private.io_addr);
+
+		if (port0 == last_port0)
+			break;	/* Data is stable */
+
+		udelay(250);
+	}
+
+	if (debug >= DEBUG)
+		pr_debug("received following data for cmd=0x%02x: port0=0x%02x last_port0=0x%02x\n",
+			 cmd, port0, last_port0);
+
+	return port0;
+}
+
+static int set_command_mode(void)
+{
+	int i, found = 0, count = 0;
+
+	/* Set the card into command mode */
+	spin_lock(&pcwd_private.io_lock);
+	while ((!found) && (count < 3)) {
+		i = send_isa_command(CMD_ISA_IDLE);
+
+		if (i == 0x00)
+			found = 1;
+		else if (i == 0xF3) {
+			/* Card does not like what we've done to it */
+			outb_p(0x00, pcwd_private.io_addr + 2);
+			udelay(1200);	/* Spec says wait 1ms */
+			outb_p(0x00, pcwd_private.io_addr + 2);
+			udelay(ISA_COMMAND_TIMEOUT);
+		}
+		count++;
+	}
+	spin_unlock(&pcwd_private.io_lock);
+	pcwd_private.command_mode = found;
+
+	if (debug >= DEBUG)
+		pr_debug("command_mode=%d\n", pcwd_private.command_mode);
+
+	return found;
+}
+
+static void unset_command_mode(void)
+{
+	/* Set the card into normal mode */
+	spin_lock(&pcwd_private.io_lock);
+	outb_p(0x00, pcwd_private.io_addr + 2);
+	udelay(ISA_COMMAND_TIMEOUT);
+	spin_unlock(&pcwd_private.io_lock);
+
+	pcwd_private.command_mode = 0;
+
+	if (debug >= DEBUG)
+		pr_debug("command_mode=%d\n", pcwd_private.command_mode);
+}
+
+static inline void pcwd_check_temperature_support(void)
+{
+	if (inb(pcwd_private.io_addr) != 0xF0)
+		pcwd_private.supports_temp = 1;
+}
+
+static inline void pcwd_get_firmware(void)
+{
+	int one, ten, hund, minor;
+
+	strcpy(pcwd_private.fw_ver_str, "ERROR");
+
+	if (set_command_mode()) {
+		one = send_isa_command(CMD_ISA_VERSION_INTEGER);
+		ten = send_isa_command(CMD_ISA_VERSION_TENTH);
+		hund = send_isa_command(CMD_ISA_VERSION_HUNDRETH);
+		minor = send_isa_command(CMD_ISA_VERSION_MINOR);
+		sprintf(pcwd_private.fw_ver_str, "%c.%c%c%c",
+					one, ten, hund, minor);
+	}
+	unset_command_mode();
+
+	return;
+}
+
+static inline int pcwd_get_option_switches(void)
+{
+	int option_switches = 0;
+
+	if (set_command_mode()) {
+		/* Get switch settings */
+		option_switches = send_isa_command(CMD_ISA_SWITCH_SETTINGS);
+	}
+
+	unset_command_mode();
+	return option_switches;
+}
+
+static void pcwd_show_card_info(void)
+{
+	int option_switches;
+
+	/* Get some extra info from the hardware (in command/debug/diag mode) */
+	if (pcwd_private.revision == PCWD_REVISION_A)
+		pr_info("ISA-PC Watchdog (REV.A) detected at port 0x%04x\n",
+			pcwd_private.io_addr);
+	else if (pcwd_private.revision == PCWD_REVISION_C) {
+		pcwd_get_firmware();
+		pr_info("ISA-PC Watchdog (REV.C) detected at port 0x%04x (Firmware version: %s)\n",
+			pcwd_private.io_addr, pcwd_private.fw_ver_str);
+		option_switches = pcwd_get_option_switches();
+		pr_info("Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n",
+			option_switches,
+			((option_switches & 0x10) ? "ON" : "OFF"),
+			((option_switches & 0x08) ? "ON" : "OFF"));
+
+		/* Reprogram internal heartbeat to 2 seconds */
+		if (set_command_mode()) {
+			send_isa_command(CMD_ISA_DELAY_TIME_2SECS);
+			unset_command_mode();
+		}
+	}
+
+	if (pcwd_private.supports_temp)
+		pr_info("Temperature Option Detected\n");
+
+	if (pcwd_private.boot_status & WDIOF_CARDRESET)
+		pr_info("Previous reboot was caused by the card\n");
+
+	if (pcwd_private.boot_status & WDIOF_OVERHEAT) {
+		pr_emerg("Card senses a CPU Overheat. Panicking!\n");
+		pr_emerg("CPU Overheat\n");
+	}
+
+	if (pcwd_private.boot_status == 0)
+		pr_info("No previous trip detected - Cold boot or reset\n");
+}
+
+static void pcwd_timer_ping(struct timer_list *unused)
+{
+	int wdrst_stat;
+
+	/* If we got a heartbeat pulse within the WDT_INTERVAL
+	 * we agree to ping the WDT */
+	if (time_before(jiffies, pcwd_private.next_heartbeat)) {
+		/* Ping the watchdog */
+		spin_lock(&pcwd_private.io_lock);
+		if (pcwd_private.revision == PCWD_REVISION_A) {
+			/*  Rev A cards are reset by setting the
+			    WD_WDRST bit in register 1 */
+			wdrst_stat = inb_p(pcwd_private.io_addr);
+			wdrst_stat &= 0x0F;
+			wdrst_stat |= WD_WDRST;
+
+			outb_p(wdrst_stat, pcwd_private.io_addr + 1);
+		} else {
+			/* Re-trigger watchdog by writing to port 0 */
+			outb_p(0x00, pcwd_private.io_addr);
+		}
+
+		/* Re-set the timer interval */
+		mod_timer(&pcwd_private.timer, jiffies + WDT_INTERVAL);
+
+		spin_unlock(&pcwd_private.io_lock);
+	} else {
+		pr_warn("Heartbeat lost! Will not ping the watchdog\n");
+	}
+}
+
+static int pcwd_start(void)
+{
+	int stat_reg;
+
+	pcwd_private.next_heartbeat = jiffies + (heartbeat * HZ);
+
+	/* Start the timer */
+	mod_timer(&pcwd_private.timer, jiffies + WDT_INTERVAL);
+
+	/* Enable the port */
+	if (pcwd_private.revision == PCWD_REVISION_C) {
+		spin_lock(&pcwd_private.io_lock);
+		outb_p(0x00, pcwd_private.io_addr + 3);
+		udelay(ISA_COMMAND_TIMEOUT);
+		stat_reg = inb_p(pcwd_private.io_addr + 2);
+		spin_unlock(&pcwd_private.io_lock);
+		if (stat_reg & WD_WDIS) {
+			pr_info("Could not start watchdog\n");
+			return -EIO;
+		}
+	}
+
+	if (debug >= VERBOSE)
+		pr_debug("Watchdog started\n");
+
+	return 0;
+}
+
+static int pcwd_stop(void)
+{
+	int stat_reg;
+
+	/* Stop the timer */
+	del_timer(&pcwd_private.timer);
+
+	/*  Disable the board  */
+	if (pcwd_private.revision == PCWD_REVISION_C) {
+		spin_lock(&pcwd_private.io_lock);
+		outb_p(0xA5, pcwd_private.io_addr + 3);
+		udelay(ISA_COMMAND_TIMEOUT);
+		outb_p(0xA5, pcwd_private.io_addr + 3);
+		udelay(ISA_COMMAND_TIMEOUT);
+		stat_reg = inb_p(pcwd_private.io_addr + 2);
+		spin_unlock(&pcwd_private.io_lock);
+		if ((stat_reg & WD_WDIS) == 0) {
+			pr_info("Could not stop watchdog\n");
+			return -EIO;
+		}
+	}
+
+	if (debug >= VERBOSE)
+		pr_debug("Watchdog stopped\n");
+
+	return 0;
+}
+
+static int pcwd_keepalive(void)
+{
+	/* user land ping */
+	pcwd_private.next_heartbeat = jiffies + (heartbeat * HZ);
+
+	if (debug >= DEBUG)
+		pr_debug("Watchdog keepalive signal send\n");
+
+	return 0;
+}
+
+static int pcwd_set_heartbeat(int t)
+{
+	if (t < 2 || t > 7200) /* arbitrary upper limit */
+		return -EINVAL;
+
+	heartbeat = t;
+
+	if (debug >= VERBOSE)
+		pr_debug("New heartbeat: %d\n", heartbeat);
+
+	return 0;
+}
+
+static int pcwd_get_status(int *status)
+{
+	int control_status;
+
+	*status = 0;
+	spin_lock(&pcwd_private.io_lock);
+	if (pcwd_private.revision == PCWD_REVISION_A)
+		/* Rev A cards return status information from
+		 * the base register, which is used for the
+		 * temperature in other cards. */
+		control_status = inb(pcwd_private.io_addr);
+	else {
+		/* Rev C cards return card status in the base
+		 * address + 1 register. And use different bits
+		 * to indicate a card initiated reset, and an
+		 * over-temperature condition. And the reboot
+		 * status can be reset. */
+		control_status = inb(pcwd_private.io_addr + 1);
+	}
+	spin_unlock(&pcwd_private.io_lock);
+
+	if (pcwd_private.revision == PCWD_REVISION_A) {
+		if (control_status & WD_WDRST)
+			*status |= WDIOF_CARDRESET;
+
+		if (control_status & WD_T110) {
+			*status |= WDIOF_OVERHEAT;
+			if (temp_panic) {
+				pr_info("Temperature overheat trip!\n");
+				kernel_power_off();
+			}
+		}
+	} else {
+		if (control_status & WD_REVC_WTRP)
+			*status |= WDIOF_CARDRESET;
+
+		if (control_status & WD_REVC_TTRP) {
+			*status |= WDIOF_OVERHEAT;
+			if (temp_panic) {
+				pr_info("Temperature overheat trip!\n");
+				kernel_power_off();
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int pcwd_clear_status(void)
+{
+	int control_status;
+
+	if (pcwd_private.revision == PCWD_REVISION_C) {
+		spin_lock(&pcwd_private.io_lock);
+
+		if (debug >= VERBOSE)
+			pr_info("clearing watchdog trip status\n");
+
+		control_status = inb_p(pcwd_private.io_addr + 1);
+
+		if (debug >= DEBUG) {
+			pr_debug("status was: 0x%02x\n", control_status);
+			pr_debug("sending: 0x%02x\n",
+				 (control_status & WD_REVC_R2DS));
+		}
+
+		/* clear reset status & Keep Relay 2 disable state as it is */
+		outb_p((control_status & WD_REVC_R2DS),
+						pcwd_private.io_addr + 1);
+
+		spin_unlock(&pcwd_private.io_lock);
+	}
+	return 0;
+}
+
+static int pcwd_get_temperature(int *temperature)
+{
+	/* check that port 0 gives temperature info and no command results */
+	if (pcwd_private.command_mode)
+		return -1;
+
+	*temperature = 0;
+	if (!pcwd_private.supports_temp)
+		return -ENODEV;
+
+	/*
+	 * Convert celsius to fahrenheit, since this was
+	 * the decided 'standard' for this return value.
+	 */
+	spin_lock(&pcwd_private.io_lock);
+	*temperature = ((inb(pcwd_private.io_addr)) * 9 / 5) + 32;
+	spin_unlock(&pcwd_private.io_lock);
+
+	if (debug >= DEBUG) {
+		pr_debug("temperature is: %d F\n", *temperature);
+	}
+
+	return 0;
+}
+
+/*
+ *	/dev/watchdog handling
+ */
+
+static long pcwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	int rv;
+	int status;
+	int temperature;
+	int new_heartbeat;
+	int __user *argp = (int __user *)arg;
+	static const struct watchdog_info ident = {
+		.options =		WDIOF_OVERHEAT |
+					WDIOF_CARDRESET |
+					WDIOF_KEEPALIVEPING |
+					WDIOF_SETTIMEOUT |
+					WDIOF_MAGICCLOSE,
+		.firmware_version =	1,
+		.identity =		"PCWD",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		return 0;
+
+	case WDIOC_GETSTATUS:
+		pcwd_get_status(&status);
+		return put_user(status, argp);
+
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(pcwd_private.boot_status, argp);
+
+	case WDIOC_GETTEMP:
+		if (pcwd_get_temperature(&temperature))
+			return -EFAULT;
+
+		return put_user(temperature, argp);
+
+	case WDIOC_SETOPTIONS:
+		if (pcwd_private.revision == PCWD_REVISION_C) {
+			if (get_user(rv, argp))
+				return -EFAULT;
+
+			if (rv & WDIOS_DISABLECARD) {
+				status = pcwd_stop();
+				if (status < 0)
+					return status;
+			}
+			if (rv & WDIOS_ENABLECARD) {
+				status = pcwd_start();
+				if (status < 0)
+					return status;
+			}
+			if (rv & WDIOS_TEMPPANIC)
+				temp_panic = 1;
+		}
+		return -EINVAL;
+
+	case WDIOC_KEEPALIVE:
+		pcwd_keepalive();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_heartbeat, argp))
+			return -EFAULT;
+
+		if (pcwd_set_heartbeat(new_heartbeat))
+			return -EINVAL;
+
+		pcwd_keepalive();
+		/* Fall */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, argp);
+
+	default:
+		return -ENOTTY;
+	}
+
+	return 0;
+}
+
+static ssize_t pcwd_write(struct file *file, const char __user *buf, size_t len,
+			  loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			expect_close = 0;
+
+			for (i = 0; i != len; i++) {
+				char c;
+
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+		pcwd_keepalive();
+	}
+	return len;
+}
+
+static int pcwd_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &open_allowed))
+		return -EBUSY;
+	if (nowayout)
+		__module_get(THIS_MODULE);
+	/* Activate */
+	pcwd_start();
+	pcwd_keepalive();
+	return nonseekable_open(inode, file);
+}
+
+static int pcwd_close(struct inode *inode, struct file *file)
+{
+	if (expect_close == 42)
+		pcwd_stop();
+	else {
+		pr_crit("Unexpected close, not stopping watchdog!\n");
+		pcwd_keepalive();
+	}
+	expect_close = 0;
+	clear_bit(0, &open_allowed);
+	return 0;
+}
+
+/*
+ *	/dev/temperature handling
+ */
+
+static ssize_t pcwd_temp_read(struct file *file, char __user *buf, size_t count,
+			 loff_t *ppos)
+{
+	int temperature;
+
+	if (pcwd_get_temperature(&temperature))
+		return -EFAULT;
+
+	if (copy_to_user(buf, &temperature, 1))
+		return -EFAULT;
+
+	return 1;
+}
+
+static int pcwd_temp_open(struct inode *inode, struct file *file)
+{
+	if (!pcwd_private.supports_temp)
+		return -ENODEV;
+
+	return nonseekable_open(inode, file);
+}
+
+static int pcwd_temp_close(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+/*
+ *	Kernel Interfaces
+ */
+
+static const struct file_operations pcwd_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= pcwd_write,
+	.unlocked_ioctl	= pcwd_ioctl,
+	.open		= pcwd_open,
+	.release	= pcwd_close,
+};
+
+static struct miscdevice pcwd_miscdev = {
+	.minor =	WATCHDOG_MINOR,
+	.name =		"watchdog",
+	.fops =		&pcwd_fops,
+};
+
+static const struct file_operations pcwd_temp_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.read		= pcwd_temp_read,
+	.open		= pcwd_temp_open,
+	.release	= pcwd_temp_close,
+};
+
+static struct miscdevice temp_miscdev = {
+	.minor =	TEMP_MINOR,
+	.name =		"temperature",
+	.fops =		&pcwd_temp_fops,
+};
+
+/*
+ *	Init & exit routines
+ */
+
+static inline int get_revision(void)
+{
+	int r = PCWD_REVISION_C;
+
+	spin_lock(&pcwd_private.io_lock);
+	/* REV A cards use only 2 io ports; test
+	 * presumes a floating bus reads as 0xff. */
+	if ((inb(pcwd_private.io_addr + 2) == 0xFF) ||
+	    (inb(pcwd_private.io_addr + 3) == 0xFF))
+		r = PCWD_REVISION_A;
+	spin_unlock(&pcwd_private.io_lock);
+
+	return r;
+}
+
+/*
+ *  The ISA cards have a heartbeat bit in one of the registers, which
+ *  register is card dependent.  The heartbeat bit is monitored, and if
+ *  found, is considered proof that a Berkshire card has been found.
+ *  The initial rate is once per second at board start up, then twice
+ *  per second for normal operation.
+ */
+static int pcwd_isa_match(struct device *dev, unsigned int id)
+{
+	int base_addr = pcwd_ioports[id];
+	int port0, last_port0;	/* Reg 0, in case it's REV A */
+	int port1, last_port1;	/* Register 1 for REV C cards */
+	int i;
+	int retval;
+
+	if (debug >= DEBUG)
+		pr_debug("pcwd_isa_match id=%d\n", id);
+
+	if (!request_region(base_addr, 4, "PCWD")) {
+		pr_info("Port 0x%04x unavailable\n", base_addr);
+		return 0;
+	}
+
+	retval = 0;
+
+	port0 = inb_p(base_addr);	/* For REV A boards */
+	port1 = inb_p(base_addr + 1);	/* For REV C boards */
+	if (port0 != 0xff || port1 != 0xff) {
+		/* Not an 'ff' from a floating bus, so must be a card! */
+		for (i = 0; i < 4; ++i) {
+
+			msleep(500);
+
+			last_port0 = port0;
+			last_port1 = port1;
+
+			port0 = inb_p(base_addr);
+			port1 = inb_p(base_addr + 1);
+
+			/* Has either hearbeat bit changed?  */
+			if ((port0 ^ last_port0) & WD_HRTBT ||
+			    (port1 ^ last_port1) & WD_REVC_HRBT) {
+				retval = 1;
+				break;
+			}
+		}
+	}
+	release_region(base_addr, 4);
+
+	return retval;
+}
+
+static int pcwd_isa_probe(struct device *dev, unsigned int id)
+{
+	int ret;
+
+	if (debug >= DEBUG)
+		pr_debug("pcwd_isa_probe id=%d\n", id);
+
+	cards_found++;
+	if (cards_found == 1)
+		pr_info("v%s Ken Hollis (kenji@bitgate.com)\n",
+							WATCHDOG_VERSION);
+
+	if (cards_found > 1) {
+		pr_err("This driver only supports 1 device\n");
+		return -ENODEV;
+	}
+
+	if (pcwd_ioports[id] == 0x0000) {
+		pr_err("No I/O-Address for card detected\n");
+		return -ENODEV;
+	}
+	pcwd_private.io_addr = pcwd_ioports[id];
+
+	spin_lock_init(&pcwd_private.io_lock);
+
+	/* Check card's revision */
+	pcwd_private.revision = get_revision();
+
+	if (!request_region(pcwd_private.io_addr,
+		(pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4, "PCWD")) {
+		pr_err("I/O address 0x%04x already in use\n",
+		       pcwd_private.io_addr);
+		ret = -EIO;
+		goto error_request_region;
+	}
+
+	/* Initial variables */
+	pcwd_private.supports_temp = 0;
+	temp_panic = 0;
+	pcwd_private.boot_status = 0x0000;
+
+	/* get the boot_status */
+	pcwd_get_status(&pcwd_private.boot_status);
+
+	/* clear the "card caused reboot" flag */
+	pcwd_clear_status();
+
+	timer_setup(&pcwd_private.timer, pcwd_timer_ping, 0);
+
+	/*  Disable the board  */
+	pcwd_stop();
+
+	/*  Check whether or not the card supports the temperature device */
+	pcwd_check_temperature_support();
+
+	/* Show info about the card itself */
+	pcwd_show_card_info();
+
+	/* If heartbeat = 0 then we use the heartbeat from the dip-switches */
+	if (heartbeat == 0)
+		heartbeat = heartbeat_tbl[(pcwd_get_option_switches() & 0x07)];
+
+	/* Check that the heartbeat value is within it's range;
+	   if not reset to the default */
+	if (pcwd_set_heartbeat(heartbeat)) {
+		pcwd_set_heartbeat(WATCHDOG_HEARTBEAT);
+		pr_info("heartbeat value must be 2 <= heartbeat <= 7200, using %d\n",
+			WATCHDOG_HEARTBEAT);
+	}
+
+	if (pcwd_private.supports_temp) {
+		ret = misc_register(&temp_miscdev);
+		if (ret) {
+			pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+			       TEMP_MINOR, ret);
+			goto error_misc_register_temp;
+		}
+	}
+
+	ret = misc_register(&pcwd_miscdev);
+	if (ret) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, ret);
+		goto error_misc_register_watchdog;
+	}
+
+	pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n",
+		heartbeat, nowayout);
+
+	return 0;
+
+error_misc_register_watchdog:
+	if (pcwd_private.supports_temp)
+		misc_deregister(&temp_miscdev);
+error_misc_register_temp:
+	release_region(pcwd_private.io_addr,
+			(pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
+error_request_region:
+	pcwd_private.io_addr = 0x0000;
+	cards_found--;
+	return ret;
+}
+
+static int pcwd_isa_remove(struct device *dev, unsigned int id)
+{
+	if (debug >= DEBUG)
+		pr_debug("pcwd_isa_remove id=%d\n", id);
+
+	if (!pcwd_private.io_addr)
+		return 1;
+
+	/*  Disable the board  */
+	if (!nowayout)
+		pcwd_stop();
+
+	/* Deregister */
+	misc_deregister(&pcwd_miscdev);
+	if (pcwd_private.supports_temp)
+		misc_deregister(&temp_miscdev);
+	release_region(pcwd_private.io_addr,
+			(pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4);
+	pcwd_private.io_addr = 0x0000;
+	cards_found--;
+
+	return 0;
+}
+
+static void pcwd_isa_shutdown(struct device *dev, unsigned int id)
+{
+	if (debug >= DEBUG)
+		pr_debug("pcwd_isa_shutdown id=%d\n", id);
+
+	pcwd_stop();
+}
+
+static struct isa_driver pcwd_isa_driver = {
+	.match		= pcwd_isa_match,
+	.probe		= pcwd_isa_probe,
+	.remove		= pcwd_isa_remove,
+	.shutdown	= pcwd_isa_shutdown,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= WATCHDOG_NAME,
+	},
+};
+
+module_isa_driver(pcwd_isa_driver, PCWD_ISA_NR_CARDS);
+
+MODULE_AUTHOR("Ken Hollis <kenji@bitgate.com>, "
+		"Wim Van Sebroeck <wim@iguana.be>");
+MODULE_DESCRIPTION("Berkshire ISA-PC Watchdog driver");
+MODULE_VERSION(WATCHDOG_VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c
new file mode 100644
index 000000000..1f78f0908
--- /dev/null
+++ b/drivers/watchdog/pcwd_pci.c
@@ -0,0 +1,822 @@
+/*
+ *	Berkshire PCI-PC Watchdog Card Driver
+ *
+ *	(c) Copyright 2003-2007 Wim Van Sebroeck <wim@iguana.be>.
+ *
+ *	Based on source code of the following authors:
+ *	  Ken Hollis <kenji@bitgate.com>,
+ *	  Lindsay Harris <lindsay@bluegum.com>,
+ *	  Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *	  Matt Domsch <Matt_Domsch@dell.com>,
+ *	  Rob Radez <rob@osinvestor.com>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
+ *	provide warranty for any of this software. This material is
+ *	provided "AS-IS" and at no charge.
+ */
+
+/*
+ *	A bells and whistles driver is available from:
+ *	http://www.kernel.org/pub/linux/kernel/people/wim/pcwd/pcwd_pci/
+ *
+ *	More info available at
+ *	http://www.berkprod.com/ or http://www.pcwatchdog.com/
+ */
+
+/*
+ *	Includes, defines, variables, module parameters, ...
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>	/* For module specific items */
+#include <linux/moduleparam.h>	/* For new moduleparam's */
+#include <linux/types.h>	/* For standard types (like size_t) */
+#include <linux/errno.h>	/* For the -ENODEV/... values */
+#include <linux/kernel.h>	/* For printk/panic/... */
+#include <linux/delay.h>	/* For mdelay function */
+#include <linux/miscdevice.h>	/* For struct miscdevice */
+#include <linux/watchdog.h>	/* For the watchdog specific items */
+#include <linux/notifier.h>	/* For notifier support */
+#include <linux/reboot.h>	/* For reboot_notifier stuff */
+#include <linux/init.h>		/* For __init/__exit/... */
+#include <linux/fs.h>		/* For file operations */
+#include <linux/pci.h>		/* For pci functions */
+#include <linux/ioport.h>	/* For io-port access */
+#include <linux/spinlock.h>	/* For spin_lock/spin_unlock/... */
+#include <linux/uaccess.h>	/* For copy_to_user/put_user/... */
+#include <linux/io.h>		/* For inb/outb/... */
+
+/* Module and version information */
+#define WATCHDOG_VERSION "1.03"
+#define WATCHDOG_DRIVER_NAME "PCI-PC Watchdog"
+#define WATCHDOG_NAME "pcwd_pci"
+#define DRIVER_VERSION WATCHDOG_DRIVER_NAME " driver, v" WATCHDOG_VERSION
+
+/* Stuff for the PCI ID's  */
+#ifndef PCI_VENDOR_ID_QUICKLOGIC
+#define PCI_VENDOR_ID_QUICKLOGIC    0x11e3
+#endif
+
+#ifndef PCI_DEVICE_ID_WATCHDOG_PCIPCWD
+#define PCI_DEVICE_ID_WATCHDOG_PCIPCWD 0x5030
+#endif
+
+/*
+ * These are the defines that describe the control status bits for the
+ * PCI-PC Watchdog card.
+ */
+/* Port 1 : Control Status #1 */
+#define WD_PCI_WTRP		0x01	/* Watchdog Trip status */
+#define WD_PCI_HRBT		0x02	/* Watchdog Heartbeat */
+#define WD_PCI_TTRP		0x04	/* Temperature Trip status */
+#define WD_PCI_RL2A		0x08	/* Relay 2 Active */
+#define WD_PCI_RL1A		0x10	/* Relay 1 Active */
+#define WD_PCI_R2DS		0x40	/* Relay 2 Disable Temperature-trip /
+									reset */
+#define WD_PCI_RLY2		0x80	/* Activate Relay 2 on the board */
+/* Port 2 : Control Status #2 */
+#define WD_PCI_WDIS		0x10	/* Watchdog Disable */
+#define WD_PCI_ENTP		0x20	/* Enable Temperature Trip Reset */
+#define WD_PCI_WRSP		0x40	/* Watchdog wrote response */
+#define WD_PCI_PCMD		0x80	/* PC has sent command */
+
+/* according to documentation max. time to process a command for the pci
+ * watchdog card is 100 ms, so we give it 150 ms to do it's job */
+#define PCI_COMMAND_TIMEOUT	150
+
+/* Watchdog's internal commands */
+#define CMD_GET_STATUS				0x04
+#define CMD_GET_FIRMWARE_VERSION		0x08
+#define CMD_READ_WATCHDOG_TIMEOUT		0x18
+#define CMD_WRITE_WATCHDOG_TIMEOUT		0x19
+#define CMD_GET_CLEAR_RESET_COUNT		0x84
+
+/* Watchdog's Dip Switch heartbeat values */
+static const int heartbeat_tbl[] = {
+	5,	/* OFF-OFF-OFF	=  5 Sec  */
+	10,	/* OFF-OFF-ON	= 10 Sec  */
+	30,	/* OFF-ON-OFF	= 30 Sec  */
+	60,	/* OFF-ON-ON	=  1 Min  */
+	300,	/* ON-OFF-OFF	=  5 Min  */
+	600,	/* ON-OFF-ON	= 10 Min  */
+	1800,	/* ON-ON-OFF	= 30 Min  */
+	3600,	/* ON-ON-ON	=  1 hour */
+};
+
+/* We can only use 1 card due to the /dev/watchdog restriction */
+static int cards_found;
+
+/* internal variables */
+static int temp_panic;
+static unsigned long is_active;
+static char expect_release;
+/* this is private data for each PCI-PC watchdog card */
+static struct {
+	/* Wether or not the card has a temperature device */
+	int supports_temp;
+	/* The card's boot status */
+	int boot_status;
+	/* The cards I/O address */
+	unsigned long io_addr;
+	/* the lock for io operations */
+	spinlock_t io_lock;
+	/* the PCI-device */
+	struct pci_dev *pdev;
+} pcipcwd_private;
+
+/* module parameters */
+#define QUIET	0	/* Default */
+#define VERBOSE	1	/* Verbose */
+#define DEBUG	2	/* print fancy stuff too */
+static int debug = QUIET;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)");
+
+#define WATCHDOG_HEARTBEAT 0	/* default heartbeat =
+						delay-time from dip-switches */
+static int heartbeat = WATCHDOG_HEARTBEAT;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. "
+	"(0<heartbeat<65536 or 0=delay-time from dip-switches, default="
+				__MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+					__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/*
+ *	Internal functions
+ */
+
+static int send_command(int cmd, int *msb, int *lsb)
+{
+	int got_response, count;
+
+	if (debug >= DEBUG)
+		pr_debug("sending following data cmd=0x%02x msb=0x%02x lsb=0x%02x\n",
+			 cmd, *msb, *lsb);
+
+	spin_lock(&pcipcwd_private.io_lock);
+	/* If a command requires data it should be written first.
+	 * Data for commands with 8 bits of data should be written to port 4.
+	 * Commands with 16 bits of data, should be written as LSB to port 4
+	 * and MSB to port 5.
+	 * After the required data has been written then write the command to
+	 * port 6. */
+	outb_p(*lsb, pcipcwd_private.io_addr + 4);
+	outb_p(*msb, pcipcwd_private.io_addr + 5);
+	outb_p(cmd, pcipcwd_private.io_addr + 6);
+
+	/* wait till the pci card processed the command, signaled by
+	 * the WRSP bit in port 2 and give it a max. timeout of
+	 * PCI_COMMAND_TIMEOUT to process */
+	got_response = inb_p(pcipcwd_private.io_addr + 2) & WD_PCI_WRSP;
+	for (count = 0; (count < PCI_COMMAND_TIMEOUT) && (!got_response);
+								count++) {
+		mdelay(1);
+		got_response = inb_p(pcipcwd_private.io_addr + 2) & WD_PCI_WRSP;
+	}
+
+	if (debug >= DEBUG) {
+		if (got_response) {
+			pr_debug("time to process command was: %d ms\n",
+				 count);
+		} else {
+			pr_debug("card did not respond on command!\n");
+		}
+	}
+
+	if (got_response) {
+		/* read back response */
+		*lsb = inb_p(pcipcwd_private.io_addr + 4);
+		*msb = inb_p(pcipcwd_private.io_addr + 5);
+
+		/* clear WRSP bit */
+		inb_p(pcipcwd_private.io_addr + 6);
+
+		if (debug >= DEBUG)
+			pr_debug("received following data for cmd=0x%02x: msb=0x%02x lsb=0x%02x\n",
+				 cmd, *msb, *lsb);
+	}
+
+	spin_unlock(&pcipcwd_private.io_lock);
+
+	return got_response;
+}
+
+static inline void pcipcwd_check_temperature_support(void)
+{
+	if (inb_p(pcipcwd_private.io_addr) != 0xF0)
+		pcipcwd_private.supports_temp = 1;
+}
+
+static int pcipcwd_get_option_switches(void)
+{
+	int option_switches;
+
+	option_switches = inb_p(pcipcwd_private.io_addr + 3);
+	return option_switches;
+}
+
+static void pcipcwd_show_card_info(void)
+{
+	int got_fw_rev, fw_rev_major, fw_rev_minor;
+	char fw_ver_str[20];		/* The cards firmware version */
+	int option_switches;
+
+	got_fw_rev = send_command(CMD_GET_FIRMWARE_VERSION, &fw_rev_major,
+								&fw_rev_minor);
+	if (got_fw_rev)
+		sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor);
+	else
+		sprintf(fw_ver_str, "<card no answer>");
+
+	/* Get switch settings */
+	option_switches = pcipcwd_get_option_switches();
+
+	pr_info("Found card at port 0x%04x (Firmware: %s) %s temp option\n",
+		(int) pcipcwd_private.io_addr, fw_ver_str,
+		(pcipcwd_private.supports_temp ? "with" : "without"));
+
+	pr_info("Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n",
+		option_switches,
+		((option_switches & 0x10) ? "ON" : "OFF"),
+		((option_switches & 0x08) ? "ON" : "OFF"));
+
+	if (pcipcwd_private.boot_status & WDIOF_CARDRESET)
+		pr_info("Previous reset was caused by the Watchdog card\n");
+
+	if (pcipcwd_private.boot_status & WDIOF_OVERHEAT)
+		pr_info("Card sensed a CPU Overheat\n");
+
+	if (pcipcwd_private.boot_status == 0)
+		pr_info("No previous trip detected - Cold boot or reset\n");
+}
+
+static int pcipcwd_start(void)
+{
+	int stat_reg;
+
+	spin_lock(&pcipcwd_private.io_lock);
+	outb_p(0x00, pcipcwd_private.io_addr + 3);
+	udelay(1000);
+
+	stat_reg = inb_p(pcipcwd_private.io_addr + 2);
+	spin_unlock(&pcipcwd_private.io_lock);
+
+	if (stat_reg & WD_PCI_WDIS) {
+		pr_err("Card timer not enabled\n");
+		return -1;
+	}
+
+	if (debug >= VERBOSE)
+		pr_debug("Watchdog started\n");
+
+	return 0;
+}
+
+static int pcipcwd_stop(void)
+{
+	int stat_reg;
+
+	spin_lock(&pcipcwd_private.io_lock);
+	outb_p(0xA5, pcipcwd_private.io_addr + 3);
+	udelay(1000);
+
+	outb_p(0xA5, pcipcwd_private.io_addr + 3);
+	udelay(1000);
+
+	stat_reg = inb_p(pcipcwd_private.io_addr + 2);
+	spin_unlock(&pcipcwd_private.io_lock);
+
+	if (!(stat_reg & WD_PCI_WDIS)) {
+		pr_err("Card did not acknowledge disable attempt\n");
+		return -1;
+	}
+
+	if (debug >= VERBOSE)
+		pr_debug("Watchdog stopped\n");
+
+	return 0;
+}
+
+static int pcipcwd_keepalive(void)
+{
+	/* Re-trigger watchdog by writing to port 0 */
+	spin_lock(&pcipcwd_private.io_lock);
+	outb_p(0x42, pcipcwd_private.io_addr);	/* send out any data */
+	spin_unlock(&pcipcwd_private.io_lock);
+
+	if (debug >= DEBUG)
+		pr_debug("Watchdog keepalive signal send\n");
+
+	return 0;
+}
+
+static int pcipcwd_set_heartbeat(int t)
+{
+	int t_msb = t / 256;
+	int t_lsb = t % 256;
+
+	if ((t < 0x0001) || (t > 0xFFFF))
+		return -EINVAL;
+
+	/* Write new heartbeat to watchdog */
+	send_command(CMD_WRITE_WATCHDOG_TIMEOUT, &t_msb, &t_lsb);
+
+	heartbeat = t;
+	if (debug >= VERBOSE)
+		pr_debug("New heartbeat: %d\n", heartbeat);
+
+	return 0;
+}
+
+static int pcipcwd_get_status(int *status)
+{
+	int control_status;
+
+	*status = 0;
+	control_status = inb_p(pcipcwd_private.io_addr + 1);
+	if (control_status & WD_PCI_WTRP)
+		*status |= WDIOF_CARDRESET;
+	if (control_status & WD_PCI_TTRP) {
+		*status |= WDIOF_OVERHEAT;
+		if (temp_panic)
+			panic(KBUILD_MODNAME ": Temperature overheat trip!\n");
+	}
+
+	if (debug >= DEBUG)
+		pr_debug("Control Status #1: 0x%02x\n", control_status);
+
+	return 0;
+}
+
+static int pcipcwd_clear_status(void)
+{
+	int control_status;
+	int msb;
+	int reset_counter;
+
+	if (debug >= VERBOSE)
+		pr_info("clearing watchdog trip status & LED\n");
+
+	control_status = inb_p(pcipcwd_private.io_addr + 1);
+
+	if (debug >= DEBUG) {
+		pr_debug("status was: 0x%02x\n", control_status);
+		pr_debug("sending: 0x%02x\n",
+			 (control_status & WD_PCI_R2DS) | WD_PCI_WTRP);
+	}
+
+	/* clear trip status & LED and keep mode of relay 2 */
+	outb_p((control_status & WD_PCI_R2DS) | WD_PCI_WTRP,
+						pcipcwd_private.io_addr + 1);
+
+	/* clear reset counter */
+	msb = 0;
+	reset_counter = 0xff;
+	send_command(CMD_GET_CLEAR_RESET_COUNT, &msb, &reset_counter);
+
+	if (debug >= DEBUG) {
+		pr_debug("reset count was: 0x%02x\n", reset_counter);
+	}
+
+	return 0;
+}
+
+static int pcipcwd_get_temperature(int *temperature)
+{
+	*temperature = 0;
+	if (!pcipcwd_private.supports_temp)
+		return -ENODEV;
+
+	spin_lock(&pcipcwd_private.io_lock);
+	*temperature = inb_p(pcipcwd_private.io_addr);
+	spin_unlock(&pcipcwd_private.io_lock);
+
+	/*
+	 * Convert celsius to fahrenheit, since this was
+	 * the decided 'standard' for this return value.
+	 */
+	*temperature = (*temperature * 9 / 5) + 32;
+
+	if (debug >= DEBUG) {
+		pr_debug("temperature is: %d F\n", *temperature);
+	}
+
+	return 0;
+}
+
+static int pcipcwd_get_timeleft(int *time_left)
+{
+	int msb;
+	int lsb;
+
+	/* Read the time that's left before rebooting */
+	/* Note: if the board is not yet armed then we will read 0xFFFF */
+	send_command(CMD_READ_WATCHDOG_TIMEOUT, &msb, &lsb);
+
+	*time_left = (msb << 8) + lsb;
+
+	if (debug >= VERBOSE)
+		pr_debug("Time left before next reboot: %d\n", *time_left);
+
+	return 0;
+}
+
+/*
+ *	/dev/watchdog handling
+ */
+
+static ssize_t pcipcwd_write(struct file *file, const char __user *data,
+			     size_t len, loff_t *ppos)
+{
+	/* See if we got the magic character 'V' and reload the timer */
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			/* note: just in case someone wrote the magic character
+			 * five months ago... */
+			expect_release = 0;
+
+			/* scan to see whether or not we got the
+			 * magic character */
+			for (i = 0; i != len; i++) {
+				char c;
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_release = 42;
+			}
+		}
+
+		/* someone wrote to us, we should reload the timer */
+		pcipcwd_keepalive();
+	}
+	return len;
+}
+
+static long pcipcwd_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static const struct watchdog_info ident = {
+		.options =		WDIOF_OVERHEAT |
+					WDIOF_CARDRESET |
+					WDIOF_KEEPALIVEPING |
+					WDIOF_SETTIMEOUT |
+					WDIOF_MAGICCLOSE,
+		.firmware_version =	1,
+		.identity =		WATCHDOG_DRIVER_NAME,
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+	{
+		int status;
+		pcipcwd_get_status(&status);
+		return put_user(status, p);
+	}
+
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(pcipcwd_private.boot_status, p);
+
+	case WDIOC_GETTEMP:
+	{
+		int temperature;
+
+		if (pcipcwd_get_temperature(&temperature))
+			return -EFAULT;
+
+		return put_user(temperature, p);
+	}
+
+	case WDIOC_SETOPTIONS:
+	{
+		int new_options, retval = -EINVAL;
+
+		if (get_user(new_options, p))
+			return -EFAULT;
+
+		if (new_options & WDIOS_DISABLECARD) {
+			if (pcipcwd_stop())
+				return -EIO;
+			retval = 0;
+		}
+
+		if (new_options & WDIOS_ENABLECARD) {
+			if (pcipcwd_start())
+				return -EIO;
+			retval = 0;
+		}
+
+		if (new_options & WDIOS_TEMPPANIC) {
+			temp_panic = 1;
+			retval = 0;
+		}
+
+		return retval;
+	}
+
+	case WDIOC_KEEPALIVE:
+		pcipcwd_keepalive();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_heartbeat;
+
+		if (get_user(new_heartbeat, p))
+			return -EFAULT;
+
+		if (pcipcwd_set_heartbeat(new_heartbeat))
+			return -EINVAL;
+
+		pcipcwd_keepalive();
+	}
+		/* fall through */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+
+	case WDIOC_GETTIMELEFT:
+	{
+		int time_left;
+
+		if (pcipcwd_get_timeleft(&time_left))
+			return -EFAULT;
+
+		return put_user(time_left, p);
+	}
+
+	default:
+		return -ENOTTY;
+	}
+}
+
+static int pcipcwd_open(struct inode *inode, struct file *file)
+{
+	/* /dev/watchdog can only be opened once */
+	if (test_and_set_bit(0, &is_active)) {
+		if (debug >= VERBOSE)
+			pr_err("Attempt to open already opened device\n");
+		return -EBUSY;
+	}
+
+	/* Activate */
+	pcipcwd_start();
+	pcipcwd_keepalive();
+	return nonseekable_open(inode, file);
+}
+
+static int pcipcwd_release(struct inode *inode, struct file *file)
+{
+	/*
+	 *      Shut off the timer.
+	 */
+	if (expect_release == 42) {
+		pcipcwd_stop();
+	} else {
+		pr_crit("Unexpected close, not stopping watchdog!\n");
+		pcipcwd_keepalive();
+	}
+	expect_release = 0;
+	clear_bit(0, &is_active);
+	return 0;
+}
+
+/*
+ *	/dev/temperature handling
+ */
+
+static ssize_t pcipcwd_temp_read(struct file *file, char __user *data,
+				size_t len, loff_t *ppos)
+{
+	int temperature;
+
+	if (pcipcwd_get_temperature(&temperature))
+		return -EFAULT;
+
+	if (copy_to_user(data, &temperature, 1))
+		return -EFAULT;
+
+	return 1;
+}
+
+static int pcipcwd_temp_open(struct inode *inode, struct file *file)
+{
+	if (!pcipcwd_private.supports_temp)
+		return -ENODEV;
+
+	return nonseekable_open(inode, file);
+}
+
+static int pcipcwd_temp_release(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+/*
+ *	Notify system
+ */
+
+static int pcipcwd_notify_sys(struct notifier_block *this, unsigned long code,
+								void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		pcipcwd_stop();	/* Turn the WDT off */
+
+	return NOTIFY_DONE;
+}
+
+/*
+ *	Kernel Interfaces
+ */
+
+static const struct file_operations pcipcwd_fops = {
+	.owner =	THIS_MODULE,
+	.llseek =	no_llseek,
+	.write =	pcipcwd_write,
+	.unlocked_ioctl = pcipcwd_ioctl,
+	.open =		pcipcwd_open,
+	.release =	pcipcwd_release,
+};
+
+static struct miscdevice pcipcwd_miscdev = {
+	.minor =	WATCHDOG_MINOR,
+	.name =		"watchdog",
+	.fops =		&pcipcwd_fops,
+};
+
+static const struct file_operations pcipcwd_temp_fops = {
+	.owner =	THIS_MODULE,
+	.llseek =	no_llseek,
+	.read =		pcipcwd_temp_read,
+	.open =		pcipcwd_temp_open,
+	.release =	pcipcwd_temp_release,
+};
+
+static struct miscdevice pcipcwd_temp_miscdev = {
+	.minor =	TEMP_MINOR,
+	.name =		"temperature",
+	.fops =		&pcipcwd_temp_fops,
+};
+
+static struct notifier_block pcipcwd_notifier = {
+	.notifier_call =	pcipcwd_notify_sys,
+};
+
+/*
+ *	Init & exit routines
+ */
+
+static int pcipcwd_card_init(struct pci_dev *pdev,
+		const struct pci_device_id *ent)
+{
+	int ret = -EIO;
+
+	cards_found++;
+	if (cards_found == 1)
+		pr_info("%s\n", DRIVER_VERSION);
+
+	if (cards_found > 1) {
+		pr_err("This driver only supports 1 device\n");
+		return -ENODEV;
+	}
+
+	if (pci_enable_device(pdev)) {
+		pr_err("Not possible to enable PCI Device\n");
+		return -ENODEV;
+	}
+
+	if (pci_resource_start(pdev, 0) == 0x0000) {
+		pr_err("No I/O-Address for card detected\n");
+		ret = -ENODEV;
+		goto err_out_disable_device;
+	}
+
+	spin_lock_init(&pcipcwd_private.io_lock);
+	pcipcwd_private.pdev = pdev;
+	pcipcwd_private.io_addr = pci_resource_start(pdev, 0);
+
+	if (pci_request_regions(pdev, WATCHDOG_NAME)) {
+		pr_err("I/O address 0x%04x already in use\n",
+		       (int) pcipcwd_private.io_addr);
+		ret = -EIO;
+		goto err_out_disable_device;
+	}
+
+	/* get the boot_status */
+	pcipcwd_get_status(&pcipcwd_private.boot_status);
+
+	/* clear the "card caused reboot" flag */
+	pcipcwd_clear_status();
+
+	/* disable card */
+	pcipcwd_stop();
+
+	/* Check whether or not the card supports the temperature device */
+	pcipcwd_check_temperature_support();
+
+	/* Show info about the card itself */
+	pcipcwd_show_card_info();
+
+	/* If heartbeat = 0 then we use the heartbeat from the dip-switches */
+	if (heartbeat == 0)
+		heartbeat =
+			heartbeat_tbl[(pcipcwd_get_option_switches() & 0x07)];
+
+	/* Check that the heartbeat value is within it's range ;
+	 * if not reset to the default */
+	if (pcipcwd_set_heartbeat(heartbeat)) {
+		pcipcwd_set_heartbeat(WATCHDOG_HEARTBEAT);
+		pr_info("heartbeat value must be 0<heartbeat<65536, using %d\n",
+			WATCHDOG_HEARTBEAT);
+	}
+
+	ret = register_reboot_notifier(&pcipcwd_notifier);
+	if (ret != 0) {
+		pr_err("cannot register reboot notifier (err=%d)\n", ret);
+		goto err_out_release_region;
+	}
+
+	if (pcipcwd_private.supports_temp) {
+		ret = misc_register(&pcipcwd_temp_miscdev);
+		if (ret != 0) {
+			pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+			       TEMP_MINOR, ret);
+			goto err_out_unregister_reboot;
+		}
+	}
+
+	ret = misc_register(&pcipcwd_miscdev);
+	if (ret != 0) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, ret);
+		goto err_out_misc_deregister;
+	}
+
+	pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n",
+		heartbeat, nowayout);
+
+	return 0;
+
+err_out_misc_deregister:
+	if (pcipcwd_private.supports_temp)
+		misc_deregister(&pcipcwd_temp_miscdev);
+err_out_unregister_reboot:
+	unregister_reboot_notifier(&pcipcwd_notifier);
+err_out_release_region:
+	pci_release_regions(pdev);
+err_out_disable_device:
+	pci_disable_device(pdev);
+	return ret;
+}
+
+static void pcipcwd_card_exit(struct pci_dev *pdev)
+{
+	/* Stop the timer before we leave */
+	if (!nowayout)
+		pcipcwd_stop();
+
+	/* Deregister */
+	misc_deregister(&pcipcwd_miscdev);
+	if (pcipcwd_private.supports_temp)
+		misc_deregister(&pcipcwd_temp_miscdev);
+	unregister_reboot_notifier(&pcipcwd_notifier);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	cards_found--;
+}
+
+static const struct pci_device_id pcipcwd_pci_tbl[] = {
+	{ PCI_VENDOR_ID_QUICKLOGIC, PCI_DEVICE_ID_WATCHDOG_PCIPCWD,
+		PCI_ANY_ID, PCI_ANY_ID, },
+	{ 0 },			/* End of list */
+};
+MODULE_DEVICE_TABLE(pci, pcipcwd_pci_tbl);
+
+static struct pci_driver pcipcwd_driver = {
+	.name		= WATCHDOG_NAME,
+	.id_table	= pcipcwd_pci_tbl,
+	.probe		= pcipcwd_card_init,
+	.remove		= pcipcwd_card_exit,
+};
+
+module_pci_driver(pcipcwd_driver);
+
+MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>");
+MODULE_DESCRIPTION("Berkshire PCI-PC Watchdog driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c
new file mode 100644
index 000000000..4d02f2615
--- /dev/null
+++ b/drivers/watchdog/pcwd_usb.c
@@ -0,0 +1,809 @@
+/*
+ *	Berkshire USB-PC Watchdog Card Driver
+ *
+ *	(c) Copyright 2004-2007 Wim Van Sebroeck <wim@iguana.be>.
+ *
+ *	Based on source code of the following authors:
+ *	  Ken Hollis <kenji@bitgate.com>,
+ *	  Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *	  Matt Domsch <Matt_Domsch@dell.com>,
+ *	  Rob Radez <rob@osinvestor.com>,
+ *	  Greg Kroah-Hartman <greg@kroah.com>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
+ *	provide warranty for any of this software. This material is
+ *	provided "AS-IS" and at no charge.
+ *
+ *	Thanks also to Simon Machell at Berkshire Products Inc. for
+ *	providing the test hardware. More info is available at
+ *	http://www.berkprod.com/ or http://www.pcwatchdog.com/
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>	/* For module specific items */
+#include <linux/moduleparam.h>	/* For new moduleparam's */
+#include <linux/types.h>	/* For standard types (like size_t) */
+#include <linux/errno.h>	/* For the -ENODEV/... values */
+#include <linux/kernel.h>	/* For printk/panic/... */
+#include <linux/delay.h>	/* For mdelay function */
+#include <linux/miscdevice.h>	/* For struct miscdevice */
+#include <linux/watchdog.h>	/* For the watchdog specific items */
+#include <linux/notifier.h>	/* For notifier support */
+#include <linux/reboot.h>	/* For reboot_notifier stuff */
+#include <linux/init.h>		/* For __init/__exit/... */
+#include <linux/fs.h>		/* For file operations */
+#include <linux/usb.h>		/* For USB functions */
+#include <linux/slab.h>		/* For kmalloc, ... */
+#include <linux/mutex.h>	/* For mutex locking */
+#include <linux/hid.h>		/* For HID_REQ_SET_REPORT & HID_DT_REPORT */
+#include <linux/uaccess.h>	/* For copy_to_user/put_user/... */
+
+
+/* Module and Version Information */
+#define DRIVER_VERSION "1.02"
+#define DRIVER_AUTHOR "Wim Van Sebroeck <wim@iguana.be>"
+#define DRIVER_DESC "Berkshire USB-PC Watchdog driver"
+#define DRIVER_NAME "pcwd_usb"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+#define WATCHDOG_HEARTBEAT 0	/* default heartbeat =
+						delay-time from dip-switches */
+static int heartbeat = WATCHDOG_HEARTBEAT;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. "
+	"(0<heartbeat<65536 or 0=delay-time from dip-switches, default="
+				__MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/* The vendor and product id's for the USB-PC Watchdog card */
+#define USB_PCWD_VENDOR_ID	0x0c98
+#define USB_PCWD_PRODUCT_ID	0x1140
+
+/* table of devices that work with this driver */
+static const struct usb_device_id usb_pcwd_table[] = {
+	{ USB_DEVICE(USB_PCWD_VENDOR_ID, USB_PCWD_PRODUCT_ID) },
+	{ }					/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, usb_pcwd_table);
+
+/* according to documentation max. time to process a command for the USB
+ * watchdog card is 100 or 200 ms, so we give it 250 ms to do it's job */
+#define USB_COMMAND_TIMEOUT	250
+
+/* Watchdog's internal commands */
+#define CMD_READ_TEMP			0x02	/* Read Temperature;
+							Re-trigger Watchdog */
+#define CMD_TRIGGER			CMD_READ_TEMP
+#define CMD_GET_STATUS			0x04	/* Get Status Information */
+#define CMD_GET_FIRMWARE_VERSION	0x08	/* Get Firmware Version */
+#define CMD_GET_DIP_SWITCH_SETTINGS	0x0c	/* Get Dip Switch Settings */
+#define CMD_READ_WATCHDOG_TIMEOUT	0x18	/* Read Current Watchdog Time */
+#define CMD_WRITE_WATCHDOG_TIMEOUT	0x19	/* Write Current WatchdogTime */
+#define CMD_ENABLE_WATCHDOG		0x30	/* Enable / Disable Watchdog */
+#define CMD_DISABLE_WATCHDOG		CMD_ENABLE_WATCHDOG
+
+/* Watchdog's Dip Switch heartbeat values */
+static const int heartbeat_tbl[] = {
+	5,	/* OFF-OFF-OFF	=  5 Sec  */
+	10,	/* OFF-OFF-ON	= 10 Sec  */
+	30,	/* OFF-ON-OFF	= 30 Sec  */
+	60,	/* OFF-ON-ON	=  1 Min  */
+	300,	/* ON-OFF-OFF	=  5 Min  */
+	600,	/* ON-OFF-ON	= 10 Min  */
+	1800,	/* ON-ON-OFF	= 30 Min  */
+	3600,	/* ON-ON-ON	=  1 hour */
+};
+
+/* We can only use 1 card due to the /dev/watchdog restriction */
+static int cards_found;
+
+/* some internal variables */
+static unsigned long is_active;
+static char expect_release;
+
+/* Structure to hold all of our device specific stuff */
+struct usb_pcwd_private {
+	/* save off the usb device pointer */
+	struct usb_device	*udev;
+	/* the interface for this device */
+	struct usb_interface	*interface;
+
+	/* the interface number used for cmd's */
+	unsigned int		interface_number;
+
+	/* the buffer to intr data */
+	unsigned char		*intr_buffer;
+	/* the dma address for the intr buffer */
+	dma_addr_t		intr_dma;
+	/* the size of the intr buffer */
+	size_t			intr_size;
+	/* the urb used for the intr pipe */
+	struct urb		*intr_urb;
+
+	/* The command that is reported back */
+	unsigned char		cmd_command;
+	/* The data MSB that is reported back */
+	unsigned char		cmd_data_msb;
+	/* The data LSB that is reported back */
+	unsigned char		cmd_data_lsb;
+	/* true if we received a report after a command */
+	atomic_t		cmd_received;
+
+	/* Wether or not the device exists */
+	int			exists;
+	/* locks this structure */
+	struct mutex		mtx;
+};
+static struct usb_pcwd_private *usb_pcwd_device;
+
+/* prevent races between open() and disconnect() */
+static DEFINE_MUTEX(disconnect_mutex);
+
+/* local function prototypes */
+static int usb_pcwd_probe(struct usb_interface *interface,
+						const struct usb_device_id *id);
+static void usb_pcwd_disconnect(struct usb_interface *interface);
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver usb_pcwd_driver = {
+	.name =		DRIVER_NAME,
+	.probe =	usb_pcwd_probe,
+	.disconnect =	usb_pcwd_disconnect,
+	.id_table =	usb_pcwd_table,
+};
+
+
+static void usb_pcwd_intr_done(struct urb *urb)
+{
+	struct usb_pcwd_private *usb_pcwd =
+				(struct usb_pcwd_private *)urb->context;
+	unsigned char *data = usb_pcwd->intr_buffer;
+	struct device *dev = &usb_pcwd->interface->dev;
+	int retval;
+
+	switch (urb->status) {
+	case 0:			/* success */
+		break;
+	case -ECONNRESET:	/* unlink */
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dev_dbg(dev, "%s - urb shutting down with status: %d",
+			__func__, urb->status);
+		return;
+	/* -EPIPE:  should clear the halt */
+	default:		/* error */
+		dev_dbg(dev, "%s - nonzero urb status received: %d",
+			__func__, urb->status);
+		goto resubmit;
+	}
+
+	dev_dbg(dev, "received following data cmd=0x%02x msb=0x%02x lsb=0x%02x",
+		data[0], data[1], data[2]);
+
+	usb_pcwd->cmd_command  = data[0];
+	usb_pcwd->cmd_data_msb = data[1];
+	usb_pcwd->cmd_data_lsb = data[2];
+
+	/* notify anyone waiting that the cmd has finished */
+	atomic_set(&usb_pcwd->cmd_received, 1);
+
+resubmit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		pr_err("can't resubmit intr, usb_submit_urb failed with result %d\n",
+		       retval);
+}
+
+static int usb_pcwd_send_command(struct usb_pcwd_private *usb_pcwd,
+		unsigned char cmd, unsigned char *msb, unsigned char *lsb)
+{
+	int got_response, count;
+	unsigned char *buf;
+
+	/* We will not send any commands if the USB PCWD device does
+	 * not exist */
+	if ((!usb_pcwd) || (!usb_pcwd->exists))
+		return -1;
+
+	buf = kmalloc(6, GFP_KERNEL);
+	if (buf == NULL)
+		return 0;
+
+	/* The USB PC Watchdog uses a 6 byte report format.
+	 * The board currently uses only 3 of the six bytes of the report. */
+	buf[0] = cmd;			/* Byte 0 = CMD */
+	buf[1] = *msb;			/* Byte 1 = Data MSB */
+	buf[2] = *lsb;			/* Byte 2 = Data LSB */
+	buf[3] = buf[4] = buf[5] = 0;	/* All other bytes not used */
+
+	dev_dbg(&usb_pcwd->interface->dev,
+		"sending following data cmd=0x%02x msb=0x%02x lsb=0x%02x",
+		buf[0], buf[1], buf[2]);
+
+	atomic_set(&usb_pcwd->cmd_received, 0);
+
+	if (usb_control_msg(usb_pcwd->udev, usb_sndctrlpipe(usb_pcwd->udev, 0),
+			HID_REQ_SET_REPORT, HID_DT_REPORT,
+			0x0200, usb_pcwd->interface_number, buf, 6,
+			USB_COMMAND_TIMEOUT) != 6) {
+		dev_dbg(&usb_pcwd->interface->dev,
+			"usb_pcwd_send_command: error in usb_control_msg for cmd 0x%x 0x%x 0x%x\n",
+			cmd, *msb, *lsb);
+	}
+	/* wait till the usb card processed the command,
+	 * with a max. timeout of USB_COMMAND_TIMEOUT */
+	got_response = 0;
+	for (count = 0; (count < USB_COMMAND_TIMEOUT) && (!got_response);
+								count++) {
+		mdelay(1);
+		if (atomic_read(&usb_pcwd->cmd_received))
+			got_response = 1;
+	}
+
+	if ((got_response) && (cmd == usb_pcwd->cmd_command)) {
+		/* read back response */
+		*msb = usb_pcwd->cmd_data_msb;
+		*lsb = usb_pcwd->cmd_data_lsb;
+	}
+
+	kfree(buf);
+
+	return got_response;
+}
+
+static int usb_pcwd_start(struct usb_pcwd_private *usb_pcwd)
+{
+	unsigned char msb = 0x00;
+	unsigned char lsb = 0x00;
+	int retval;
+
+	/* Enable Watchdog */
+	retval = usb_pcwd_send_command(usb_pcwd, CMD_ENABLE_WATCHDOG,
+								&msb, &lsb);
+
+	if ((retval == 0) || (lsb == 0)) {
+		pr_err("Card did not acknowledge enable attempt\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int usb_pcwd_stop(struct usb_pcwd_private *usb_pcwd)
+{
+	unsigned char msb = 0xA5;
+	unsigned char lsb = 0xC3;
+	int retval;
+
+	/* Disable Watchdog */
+	retval = usb_pcwd_send_command(usb_pcwd, CMD_DISABLE_WATCHDOG,
+								&msb, &lsb);
+
+	if ((retval == 0) || (lsb != 0)) {
+		pr_err("Card did not acknowledge disable attempt\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int usb_pcwd_keepalive(struct usb_pcwd_private *usb_pcwd)
+{
+	unsigned char dummy;
+
+	/* Re-trigger Watchdog */
+	usb_pcwd_send_command(usb_pcwd, CMD_TRIGGER, &dummy, &dummy);
+
+	return 0;
+}
+
+static int usb_pcwd_set_heartbeat(struct usb_pcwd_private *usb_pcwd, int t)
+{
+	unsigned char msb = t / 256;
+	unsigned char lsb = t % 256;
+
+	if ((t < 0x0001) || (t > 0xFFFF))
+		return -EINVAL;
+
+	/* Write new heartbeat to watchdog */
+	usb_pcwd_send_command(usb_pcwd, CMD_WRITE_WATCHDOG_TIMEOUT, &msb, &lsb);
+
+	heartbeat = t;
+	return 0;
+}
+
+static int usb_pcwd_get_temperature(struct usb_pcwd_private *usb_pcwd,
+							int *temperature)
+{
+	unsigned char msb, lsb;
+
+	usb_pcwd_send_command(usb_pcwd, CMD_READ_TEMP, &msb, &lsb);
+
+	/*
+	 * Convert celsius to fahrenheit, since this was
+	 * the decided 'standard' for this return value.
+	 */
+	*temperature = (lsb * 9 / 5) + 32;
+
+	return 0;
+}
+
+static int usb_pcwd_get_timeleft(struct usb_pcwd_private *usb_pcwd,
+								int *time_left)
+{
+	unsigned char msb, lsb;
+
+	/* Read the time that's left before rebooting */
+	/* Note: if the board is not yet armed then we will read 0xFFFF */
+	usb_pcwd_send_command(usb_pcwd, CMD_READ_WATCHDOG_TIMEOUT, &msb, &lsb);
+
+	*time_left = (msb << 8) + lsb;
+
+	return 0;
+}
+
+/*
+ *	/dev/watchdog handling
+ */
+
+static ssize_t usb_pcwd_write(struct file *file, const char __user *data,
+						size_t len, loff_t *ppos)
+{
+	/* See if we got the magic character 'V' and reload the timer */
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			/* note: just in case someone wrote the magic character
+			 * five months ago... */
+			expect_release = 0;
+
+			/* scan to see whether or not we got the
+			 * magic character */
+			for (i = 0; i != len; i++) {
+				char c;
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_release = 42;
+			}
+		}
+
+		/* someone wrote to us, we should reload the timer */
+		usb_pcwd_keepalive(usb_pcwd_device);
+	}
+	return len;
+}
+
+static long usb_pcwd_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static const struct watchdog_info ident = {
+		.options =		WDIOF_KEEPALIVEPING |
+					WDIOF_SETTIMEOUT |
+					WDIOF_MAGICCLOSE,
+		.firmware_version =	1,
+		.identity =		DRIVER_NAME,
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_GETTEMP:
+	{
+		int temperature;
+
+		if (usb_pcwd_get_temperature(usb_pcwd_device, &temperature))
+			return -EFAULT;
+
+		return put_user(temperature, p);
+	}
+
+	case WDIOC_SETOPTIONS:
+	{
+		int new_options, retval = -EINVAL;
+
+		if (get_user(new_options, p))
+			return -EFAULT;
+
+		if (new_options & WDIOS_DISABLECARD) {
+			usb_pcwd_stop(usb_pcwd_device);
+			retval = 0;
+		}
+
+		if (new_options & WDIOS_ENABLECARD) {
+			usb_pcwd_start(usb_pcwd_device);
+			retval = 0;
+		}
+
+		return retval;
+	}
+
+	case WDIOC_KEEPALIVE:
+		usb_pcwd_keepalive(usb_pcwd_device);
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_heartbeat;
+
+		if (get_user(new_heartbeat, p))
+			return -EFAULT;
+
+		if (usb_pcwd_set_heartbeat(usb_pcwd_device, new_heartbeat))
+			return -EINVAL;
+
+		usb_pcwd_keepalive(usb_pcwd_device);
+	}
+		/* fall through */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+
+	case WDIOC_GETTIMELEFT:
+	{
+		int time_left;
+
+		if (usb_pcwd_get_timeleft(usb_pcwd_device, &time_left))
+			return -EFAULT;
+
+		return put_user(time_left, p);
+	}
+
+	default:
+		return -ENOTTY;
+	}
+}
+
+static int usb_pcwd_open(struct inode *inode, struct file *file)
+{
+	/* /dev/watchdog can only be opened once */
+	if (test_and_set_bit(0, &is_active))
+		return -EBUSY;
+
+	/* Activate */
+	usb_pcwd_start(usb_pcwd_device);
+	usb_pcwd_keepalive(usb_pcwd_device);
+	return nonseekable_open(inode, file);
+}
+
+static int usb_pcwd_release(struct inode *inode, struct file *file)
+{
+	/*
+	 *      Shut off the timer.
+	 */
+	if (expect_release == 42) {
+		usb_pcwd_stop(usb_pcwd_device);
+	} else {
+		pr_crit("Unexpected close, not stopping watchdog!\n");
+		usb_pcwd_keepalive(usb_pcwd_device);
+	}
+	expect_release = 0;
+	clear_bit(0, &is_active);
+	return 0;
+}
+
+/*
+ *	/dev/temperature handling
+ */
+
+static ssize_t usb_pcwd_temperature_read(struct file *file, char __user *data,
+				size_t len, loff_t *ppos)
+{
+	int temperature;
+
+	if (usb_pcwd_get_temperature(usb_pcwd_device, &temperature))
+		return -EFAULT;
+
+	if (copy_to_user(data, &temperature, 1))
+		return -EFAULT;
+
+	return 1;
+}
+
+static int usb_pcwd_temperature_open(struct inode *inode, struct file *file)
+{
+	return nonseekable_open(inode, file);
+}
+
+static int usb_pcwd_temperature_release(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+/*
+ *	Notify system
+ */
+
+static int usb_pcwd_notify_sys(struct notifier_block *this, unsigned long code,
+								void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		usb_pcwd_stop(usb_pcwd_device);	/* Turn the WDT off */
+
+	return NOTIFY_DONE;
+}
+
+/*
+ *	Kernel Interfaces
+ */
+
+static const struct file_operations usb_pcwd_fops = {
+	.owner =	THIS_MODULE,
+	.llseek =	no_llseek,
+	.write =	usb_pcwd_write,
+	.unlocked_ioctl = usb_pcwd_ioctl,
+	.open =		usb_pcwd_open,
+	.release =	usb_pcwd_release,
+};
+
+static struct miscdevice usb_pcwd_miscdev = {
+	.minor =	WATCHDOG_MINOR,
+	.name =		"watchdog",
+	.fops =		&usb_pcwd_fops,
+};
+
+static const struct file_operations usb_pcwd_temperature_fops = {
+	.owner =	THIS_MODULE,
+	.llseek =	no_llseek,
+	.read =		usb_pcwd_temperature_read,
+	.open =		usb_pcwd_temperature_open,
+	.release =	usb_pcwd_temperature_release,
+};
+
+static struct miscdevice usb_pcwd_temperature_miscdev = {
+	.minor =	TEMP_MINOR,
+	.name =		"temperature",
+	.fops =		&usb_pcwd_temperature_fops,
+};
+
+static struct notifier_block usb_pcwd_notifier = {
+	.notifier_call =	usb_pcwd_notify_sys,
+};
+
+/**
+ *	usb_pcwd_delete
+ */
+static inline void usb_pcwd_delete(struct usb_pcwd_private *usb_pcwd)
+{
+	usb_free_urb(usb_pcwd->intr_urb);
+	if (usb_pcwd->intr_buffer != NULL)
+		usb_free_coherent(usb_pcwd->udev, usb_pcwd->intr_size,
+				  usb_pcwd->intr_buffer, usb_pcwd->intr_dma);
+	kfree(usb_pcwd);
+}
+
+/**
+ *	usb_pcwd_probe
+ *
+ *	Called by the usb core when a new device is connected that it thinks
+ *	this driver might be interested in.
+ */
+static int usb_pcwd_probe(struct usb_interface *interface,
+						const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_pcwd_private *usb_pcwd = NULL;
+	int pipe;
+	int retval = -ENOMEM;
+	int got_fw_rev;
+	unsigned char fw_rev_major, fw_rev_minor;
+	char fw_ver_str[20];
+	unsigned char option_switches, dummy;
+
+	cards_found++;
+	if (cards_found > 1) {
+		pr_err("This driver only supports 1 device\n");
+		return -ENODEV;
+	}
+
+	/* get the active interface descriptor */
+	iface_desc = interface->cur_altsetting;
+
+	/* check out that we have a HID device */
+	if (!(iface_desc->desc.bInterfaceClass == USB_CLASS_HID)) {
+		pr_err("The device isn't a Human Interface Device\n");
+		return -ENODEV;
+	}
+
+	if (iface_desc->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
+	/* check out the endpoint: it has to be Interrupt & IN */
+	endpoint = &iface_desc->endpoint[0].desc;
+
+	if (!usb_endpoint_is_int_in(endpoint)) {
+		/* we didn't find a Interrupt endpoint with direction IN */
+		pr_err("Couldn't find an INTR & IN endpoint\n");
+		return -ENODEV;
+	}
+
+	/* get a handle to the interrupt data pipe */
+	pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
+
+	/* allocate memory for our device and initialize it */
+	usb_pcwd = kzalloc(sizeof(struct usb_pcwd_private), GFP_KERNEL);
+	if (usb_pcwd == NULL)
+		goto error;
+
+	usb_pcwd_device = usb_pcwd;
+
+	mutex_init(&usb_pcwd->mtx);
+	usb_pcwd->udev = udev;
+	usb_pcwd->interface = interface;
+	usb_pcwd->interface_number = iface_desc->desc.bInterfaceNumber;
+	usb_pcwd->intr_size = (le16_to_cpu(endpoint->wMaxPacketSize) > 8 ?
+				le16_to_cpu(endpoint->wMaxPacketSize) : 8);
+
+	/* set up the memory buffer's */
+	usb_pcwd->intr_buffer = usb_alloc_coherent(udev, usb_pcwd->intr_size,
+					GFP_ATOMIC, &usb_pcwd->intr_dma);
+	if (!usb_pcwd->intr_buffer) {
+		pr_err("Out of memory\n");
+		goto error;
+	}
+
+	/* allocate the urb's */
+	usb_pcwd->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!usb_pcwd->intr_urb)
+		goto error;
+
+	/* initialise the intr urb's */
+	usb_fill_int_urb(usb_pcwd->intr_urb, udev, pipe,
+			usb_pcwd->intr_buffer, usb_pcwd->intr_size,
+			usb_pcwd_intr_done, usb_pcwd, endpoint->bInterval);
+	usb_pcwd->intr_urb->transfer_dma = usb_pcwd->intr_dma;
+	usb_pcwd->intr_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	/* register our interrupt URB with the USB system */
+	if (usb_submit_urb(usb_pcwd->intr_urb, GFP_KERNEL)) {
+		pr_err("Problem registering interrupt URB\n");
+		retval = -EIO; /* failure */
+		goto error;
+	}
+
+	/* The device exists and can be communicated with */
+	usb_pcwd->exists = 1;
+
+	/* disable card */
+	usb_pcwd_stop(usb_pcwd);
+
+	/* Get the Firmware Version */
+	got_fw_rev = usb_pcwd_send_command(usb_pcwd, CMD_GET_FIRMWARE_VERSION,
+						&fw_rev_major, &fw_rev_minor);
+	if (got_fw_rev)
+		sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor);
+	else
+		sprintf(fw_ver_str, "<card no answer>");
+
+	pr_info("Found card (Firmware: %s) with temp option\n", fw_ver_str);
+
+	/* Get switch settings */
+	usb_pcwd_send_command(usb_pcwd, CMD_GET_DIP_SWITCH_SETTINGS, &dummy,
+							&option_switches);
+
+	pr_info("Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n",
+		option_switches,
+		((option_switches & 0x10) ? "ON" : "OFF"),
+		((option_switches & 0x08) ? "ON" : "OFF"));
+
+	/* If heartbeat = 0 then we use the heartbeat from the dip-switches */
+	if (heartbeat == 0)
+		heartbeat = heartbeat_tbl[(option_switches & 0x07)];
+
+	/* Check that the heartbeat value is within it's range ;
+	 * if not reset to the default */
+	if (usb_pcwd_set_heartbeat(usb_pcwd, heartbeat)) {
+		usb_pcwd_set_heartbeat(usb_pcwd, WATCHDOG_HEARTBEAT);
+		pr_info("heartbeat value must be 0<heartbeat<65536, using %d\n",
+			WATCHDOG_HEARTBEAT);
+	}
+
+	retval = register_reboot_notifier(&usb_pcwd_notifier);
+	if (retval != 0) {
+		pr_err("cannot register reboot notifier (err=%d)\n", retval);
+		goto error;
+	}
+
+	retval = misc_register(&usb_pcwd_temperature_miscdev);
+	if (retval != 0) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       TEMP_MINOR, retval);
+		goto err_out_unregister_reboot;
+	}
+
+	retval = misc_register(&usb_pcwd_miscdev);
+	if (retval != 0) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, retval);
+		goto err_out_misc_deregister;
+	}
+
+	/* we can register the device now, as it is ready */
+	usb_set_intfdata(interface, usb_pcwd);
+
+	pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n",
+		heartbeat, nowayout);
+
+	return 0;
+
+err_out_misc_deregister:
+	misc_deregister(&usb_pcwd_temperature_miscdev);
+err_out_unregister_reboot:
+	unregister_reboot_notifier(&usb_pcwd_notifier);
+error:
+	if (usb_pcwd)
+		usb_pcwd_delete(usb_pcwd);
+	usb_pcwd_device = NULL;
+	return retval;
+}
+
+
+/**
+ *	usb_pcwd_disconnect
+ *
+ *	Called by the usb core when the device is removed from the system.
+ *
+ *	This routine guarantees that the driver will not submit any more urbs
+ *	by clearing dev->udev.
+ */
+static void usb_pcwd_disconnect(struct usb_interface *interface)
+{
+	struct usb_pcwd_private *usb_pcwd;
+
+	/* prevent races with open() */
+	mutex_lock(&disconnect_mutex);
+
+	usb_pcwd = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
+
+	mutex_lock(&usb_pcwd->mtx);
+
+	/* Stop the timer before we leave */
+	if (!nowayout)
+		usb_pcwd_stop(usb_pcwd);
+
+	/* We should now stop communicating with the USB PCWD device */
+	usb_pcwd->exists = 0;
+
+	/* Deregister */
+	misc_deregister(&usb_pcwd_miscdev);
+	misc_deregister(&usb_pcwd_temperature_miscdev);
+	unregister_reboot_notifier(&usb_pcwd_notifier);
+
+	mutex_unlock(&usb_pcwd->mtx);
+
+	/* Delete the USB PCWD device */
+	usb_pcwd_delete(usb_pcwd);
+
+	cards_found--;
+
+	mutex_unlock(&disconnect_mutex);
+
+	pr_info("USB PC Watchdog disconnected\n");
+}
+
+module_usb_driver(usb_pcwd_driver);
diff --git a/drivers/watchdog/pic32-dmt.c b/drivers/watchdog/pic32-dmt.c
new file mode 100644
index 000000000..c797305f8
--- /dev/null
+++ b/drivers/watchdog/pic32-dmt.c
@@ -0,0 +1,256 @@
+/*
+ * PIC32 deadman timer driver
+ *
+ * Purna Chandra Mandal <purna.mandal@microchip.com>
+ * Copyright (c) 2016, Microchip Technology Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/watchdog.h>
+
+#include <asm/mach-pic32/pic32.h>
+
+/* Deadman Timer Regs */
+#define DMTCON_REG	0x00
+#define DMTPRECLR_REG	0x10
+#define DMTCLR_REG	0x20
+#define DMTSTAT_REG	0x30
+#define DMTCNT_REG	0x40
+#define DMTPSCNT_REG	0x60
+#define DMTPSINTV_REG	0x70
+
+/* Deadman Timer Regs fields */
+#define DMT_ON			BIT(15)
+#define DMT_STEP1_KEY		BIT(6)
+#define DMT_STEP2_KEY		BIT(3)
+#define DMTSTAT_WINOPN		BIT(0)
+#define DMTSTAT_EVENT		BIT(5)
+#define DMTSTAT_BAD2		BIT(6)
+#define DMTSTAT_BAD1		BIT(7)
+
+/* Reset Control Register fields for watchdog */
+#define RESETCON_DMT_TIMEOUT	BIT(5)
+
+struct pic32_dmt {
+	void __iomem	*regs;
+	struct clk	*clk;
+};
+
+static inline void dmt_enable(struct pic32_dmt *dmt)
+{
+	writel(DMT_ON, PIC32_SET(dmt->regs + DMTCON_REG));
+}
+
+static inline void dmt_disable(struct pic32_dmt *dmt)
+{
+	writel(DMT_ON, PIC32_CLR(dmt->regs + DMTCON_REG));
+	/*
+	 * Cannot touch registers in the CPU cycle following clearing the
+	 * ON bit.
+	 */
+	nop();
+}
+
+static inline int dmt_bad_status(struct pic32_dmt *dmt)
+{
+	u32 val;
+
+	val = readl(dmt->regs + DMTSTAT_REG);
+	val &= (DMTSTAT_BAD1 | DMTSTAT_BAD2 | DMTSTAT_EVENT);
+	if (val)
+		return -EAGAIN;
+
+	return 0;
+}
+
+static inline int dmt_keepalive(struct pic32_dmt *dmt)
+{
+	u32 v;
+	u32 timeout = 500;
+
+	/* set pre-clear key */
+	writel(DMT_STEP1_KEY << 8, dmt->regs + DMTPRECLR_REG);
+
+	/* wait for DMT window to open */
+	while (--timeout) {
+		v = readl(dmt->regs + DMTSTAT_REG) & DMTSTAT_WINOPN;
+		if (v == DMTSTAT_WINOPN)
+			break;
+	}
+
+	/* apply key2 */
+	writel(DMT_STEP2_KEY, dmt->regs + DMTCLR_REG);
+
+	/* check whether keys are latched correctly */
+	return dmt_bad_status(dmt);
+}
+
+static inline u32 pic32_dmt_get_timeout_secs(struct pic32_dmt *dmt)
+{
+	unsigned long rate;
+
+	rate = clk_get_rate(dmt->clk);
+	if (rate)
+		return readl(dmt->regs + DMTPSCNT_REG) / rate;
+
+	return 0;
+}
+
+static inline u32 pic32_dmt_bootstatus(struct pic32_dmt *dmt)
+{
+	u32 v;
+	void __iomem *rst_base;
+
+	rst_base = ioremap(PIC32_BASE_RESET, 0x10);
+	if (!rst_base)
+		return 0;
+
+	v = readl(rst_base);
+
+	writel(RESETCON_DMT_TIMEOUT, PIC32_CLR(rst_base));
+
+	iounmap(rst_base);
+	return v & RESETCON_DMT_TIMEOUT;
+}
+
+static int pic32_dmt_start(struct watchdog_device *wdd)
+{
+	struct pic32_dmt *dmt = watchdog_get_drvdata(wdd);
+
+	dmt_enable(dmt);
+	return dmt_keepalive(dmt);
+}
+
+static int pic32_dmt_stop(struct watchdog_device *wdd)
+{
+	struct pic32_dmt *dmt = watchdog_get_drvdata(wdd);
+
+	dmt_disable(dmt);
+
+	return 0;
+}
+
+static int pic32_dmt_ping(struct watchdog_device *wdd)
+{
+	struct pic32_dmt *dmt = watchdog_get_drvdata(wdd);
+
+	return dmt_keepalive(dmt);
+}
+
+static const struct watchdog_ops pic32_dmt_fops = {
+	.owner		= THIS_MODULE,
+	.start		= pic32_dmt_start,
+	.stop		= pic32_dmt_stop,
+	.ping		= pic32_dmt_ping,
+};
+
+static const struct watchdog_info pic32_dmt_ident = {
+	.options	= WDIOF_KEEPALIVEPING |
+			  WDIOF_MAGICCLOSE,
+	.identity	= "PIC32 Deadman Timer",
+};
+
+static struct watchdog_device pic32_dmt_wdd = {
+	.info		= &pic32_dmt_ident,
+	.ops		= &pic32_dmt_fops,
+};
+
+static int pic32_dmt_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct pic32_dmt *dmt;
+	struct resource *mem;
+	struct watchdog_device *wdd = &pic32_dmt_wdd;
+
+	dmt = devm_kzalloc(&pdev->dev, sizeof(*dmt), GFP_KERNEL);
+	if (!dmt)
+		return -ENOMEM;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dmt->regs = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(dmt->regs))
+		return PTR_ERR(dmt->regs);
+
+	dmt->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(dmt->clk)) {
+		dev_err(&pdev->dev, "clk not found\n");
+		return PTR_ERR(dmt->clk);
+	}
+
+	ret = clk_prepare_enable(dmt->clk);
+	if (ret)
+		return ret;
+
+	wdd->timeout = pic32_dmt_get_timeout_secs(dmt);
+	if (!wdd->timeout) {
+		dev_err(&pdev->dev,
+			"failed to read watchdog register timeout\n");
+		ret = -EINVAL;
+		goto out_disable_clk;
+	}
+
+	dev_info(&pdev->dev, "timeout %d\n", wdd->timeout);
+
+	wdd->bootstatus = pic32_dmt_bootstatus(dmt) ? WDIOF_CARDRESET : 0;
+
+	watchdog_set_nowayout(wdd, WATCHDOG_NOWAYOUT);
+	watchdog_set_drvdata(wdd, dmt);
+
+	ret = watchdog_register_device(wdd);
+	if (ret) {
+		dev_err(&pdev->dev, "watchdog register failed, err %d\n", ret);
+		goto out_disable_clk;
+	}
+
+	platform_set_drvdata(pdev, wdd);
+	return 0;
+
+out_disable_clk:
+	clk_disable_unprepare(dmt->clk);
+	return ret;
+}
+
+static int pic32_dmt_remove(struct platform_device *pdev)
+{
+	struct watchdog_device *wdd = platform_get_drvdata(pdev);
+	struct pic32_dmt *dmt = watchdog_get_drvdata(wdd);
+
+	watchdog_unregister_device(wdd);
+	clk_disable_unprepare(dmt->clk);
+
+	return 0;
+}
+
+static const struct of_device_id pic32_dmt_of_ids[] = {
+	{ .compatible = "microchip,pic32mzda-dmt",},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pic32_dmt_of_ids);
+
+static struct platform_driver pic32_dmt_driver = {
+	.probe		= pic32_dmt_probe,
+	.remove		= pic32_dmt_remove,
+	.driver		= {
+		.name		= "pic32-dmt",
+		.of_match_table = of_match_ptr(pic32_dmt_of_ids),
+	}
+};
+
+module_platform_driver(pic32_dmt_driver);
+
+MODULE_AUTHOR("Purna Chandra Mandal <purna.mandal@microchip.com>");
+MODULE_DESCRIPTION("Microchip PIC32 DMT Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/pic32-wdt.c b/drivers/watchdog/pic32-wdt.c
new file mode 100644
index 000000000..e2761068d
--- /dev/null
+++ b/drivers/watchdog/pic32-wdt.c
@@ -0,0 +1,262 @@
+/*
+ * PIC32 watchdog driver
+ *
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (c) 2016, Microchip Technology Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/watchdog.h>
+
+#include <asm/mach-pic32/pic32.h>
+
+/* Watchdog Timer Registers */
+#define WDTCON_REG		0x00
+
+/* Watchdog Timer Control Register fields */
+#define WDTCON_WIN_EN		BIT(0)
+#define WDTCON_RMCS_MASK	0x0003
+#define WDTCON_RMCS_SHIFT	0x0006
+#define WDTCON_RMPS_MASK	0x001F
+#define WDTCON_RMPS_SHIFT	0x0008
+#define WDTCON_ON		BIT(15)
+#define WDTCON_CLR_KEY		0x5743
+
+/* Reset Control Register fields for watchdog */
+#define RESETCON_TIMEOUT_IDLE	BIT(2)
+#define RESETCON_TIMEOUT_SLEEP	BIT(3)
+#define RESETCON_WDT_TIMEOUT	BIT(4)
+
+struct pic32_wdt {
+	void __iomem	*regs;
+	void __iomem	*rst_base;
+	struct clk	*clk;
+};
+
+static inline bool pic32_wdt_is_win_enabled(struct pic32_wdt *wdt)
+{
+	return !!(readl(wdt->regs + WDTCON_REG) & WDTCON_WIN_EN);
+}
+
+static inline u32 pic32_wdt_get_post_scaler(struct pic32_wdt *wdt)
+{
+	u32 v = readl(wdt->regs + WDTCON_REG);
+
+	return (v >> WDTCON_RMPS_SHIFT) & WDTCON_RMPS_MASK;
+}
+
+static inline u32 pic32_wdt_get_clk_id(struct pic32_wdt *wdt)
+{
+	u32 v = readl(wdt->regs + WDTCON_REG);
+
+	return (v >> WDTCON_RMCS_SHIFT) & WDTCON_RMCS_MASK;
+}
+
+static int pic32_wdt_bootstatus(struct pic32_wdt *wdt)
+{
+	u32 v = readl(wdt->rst_base);
+
+	writel(RESETCON_WDT_TIMEOUT, PIC32_CLR(wdt->rst_base));
+
+	return v & RESETCON_WDT_TIMEOUT;
+}
+
+static u32 pic32_wdt_get_timeout_secs(struct pic32_wdt *wdt, struct device *dev)
+{
+	unsigned long rate;
+	u32 period, ps, terminal;
+
+	rate = clk_get_rate(wdt->clk);
+
+	dev_dbg(dev, "wdt: clk_id %d, clk_rate %lu (prescale)\n",
+		pic32_wdt_get_clk_id(wdt), rate);
+
+	/* default, prescaler of 32 (i.e. div-by-32) is implicit. */
+	rate >>= 5;
+	if (!rate)
+		return 0;
+
+	/* calculate terminal count from postscaler. */
+	ps = pic32_wdt_get_post_scaler(wdt);
+	terminal = BIT(ps);
+
+	/* find time taken (in secs) to reach terminal count */
+	period = terminal / rate;
+	dev_dbg(dev,
+		"wdt: clk_rate %lu (postscale) / terminal %d, timeout %dsec\n",
+		rate, terminal, period);
+
+	return period;
+}
+
+static void pic32_wdt_keepalive(struct pic32_wdt *wdt)
+{
+	/* write key through single half-word */
+	writew(WDTCON_CLR_KEY, wdt->regs + WDTCON_REG + 2);
+}
+
+static int pic32_wdt_start(struct watchdog_device *wdd)
+{
+	struct pic32_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	writel(WDTCON_ON, PIC32_SET(wdt->regs + WDTCON_REG));
+	pic32_wdt_keepalive(wdt);
+
+	return 0;
+}
+
+static int pic32_wdt_stop(struct watchdog_device *wdd)
+{
+	struct pic32_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	writel(WDTCON_ON, PIC32_CLR(wdt->regs + WDTCON_REG));
+
+	/*
+	 * Cannot touch registers in the CPU cycle following clearing the
+	 * ON bit.
+	 */
+	nop();
+
+	return 0;
+}
+
+static int pic32_wdt_ping(struct watchdog_device *wdd)
+{
+	struct pic32_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	pic32_wdt_keepalive(wdt);
+
+	return 0;
+}
+
+static const struct watchdog_ops pic32_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.start		= pic32_wdt_start,
+	.stop		= pic32_wdt_stop,
+	.ping		= pic32_wdt_ping,
+};
+
+static const struct watchdog_info pic32_wdt_ident = {
+	.options = WDIOF_KEEPALIVEPING |
+			WDIOF_MAGICCLOSE | WDIOF_CARDRESET,
+	.identity = "PIC32 Watchdog",
+};
+
+static struct watchdog_device pic32_wdd = {
+	.info		= &pic32_wdt_ident,
+	.ops		= &pic32_wdt_fops,
+};
+
+static const struct of_device_id pic32_wdt_dt_ids[] = {
+	{ .compatible = "microchip,pic32mzda-wdt", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pic32_wdt_dt_ids);
+
+static int pic32_wdt_drv_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct watchdog_device *wdd = &pic32_wdd;
+	struct pic32_wdt *wdt;
+	struct resource *mem;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->regs = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(wdt->regs))
+		return PTR_ERR(wdt->regs);
+
+	wdt->rst_base = devm_ioremap(&pdev->dev, PIC32_BASE_RESET, 0x10);
+	if (!wdt->rst_base)
+		return -ENOMEM;
+
+	wdt->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(wdt->clk)) {
+		dev_err(&pdev->dev, "clk not found\n");
+		return PTR_ERR(wdt->clk);
+	}
+
+	ret = clk_prepare_enable(wdt->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "clk enable failed\n");
+		return ret;
+	}
+
+	if (pic32_wdt_is_win_enabled(wdt)) {
+		dev_err(&pdev->dev, "windowed-clear mode is not supported.\n");
+		ret = -ENODEV;
+		goto out_disable_clk;
+	}
+
+	wdd->timeout = pic32_wdt_get_timeout_secs(wdt, &pdev->dev);
+	if (!wdd->timeout) {
+		dev_err(&pdev->dev,
+			"failed to read watchdog register timeout\n");
+		ret = -EINVAL;
+		goto out_disable_clk;
+	}
+
+	dev_info(&pdev->dev, "timeout %d\n", wdd->timeout);
+
+	wdd->bootstatus = pic32_wdt_bootstatus(wdt) ? WDIOF_CARDRESET : 0;
+
+	watchdog_set_nowayout(wdd, WATCHDOG_NOWAYOUT);
+	watchdog_set_drvdata(wdd, wdt);
+
+	ret = watchdog_register_device(wdd);
+	if (ret) {
+		dev_err(&pdev->dev, "watchdog register failed, err %d\n", ret);
+		goto out_disable_clk;
+	}
+
+	platform_set_drvdata(pdev, wdd);
+
+	return 0;
+
+out_disable_clk:
+	clk_disable_unprepare(wdt->clk);
+
+	return ret;
+}
+
+static int pic32_wdt_drv_remove(struct platform_device *pdev)
+{
+	struct watchdog_device *wdd = platform_get_drvdata(pdev);
+	struct pic32_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	watchdog_unregister_device(wdd);
+	clk_disable_unprepare(wdt->clk);
+
+	return 0;
+}
+
+static struct platform_driver pic32_wdt_driver = {
+	.probe		= pic32_wdt_drv_probe,
+	.remove		= pic32_wdt_drv_remove,
+	.driver		= {
+		.name		= "pic32-wdt",
+		.of_match_table = of_match_ptr(pic32_wdt_dt_ids),
+	}
+};
+
+module_platform_driver(pic32_wdt_driver);
+
+MODULE_AUTHOR("Joshua Henderson <joshua.henderson@microchip.com>");
+MODULE_DESCRIPTION("Microchip PIC32 Watchdog Timer");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/pika_wdt.c b/drivers/watchdog/pika_wdt.c
new file mode 100644
index 000000000..e0a6f8c0f
--- /dev/null
+++ b/drivers/watchdog/pika_wdt.c
@@ -0,0 +1,301 @@
+/*
+ * PIKA FPGA based Watchdog Timer
+ *
+ * Copyright (c) 2008 PIKA Technologies
+ *   Sean MacLennan <smaclennan@pikatech.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/reboot.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
+#include <linux/bitops.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#define DRV_NAME "PIKA-WDT"
+
+/* Hardware timeout in seconds */
+#define WDT_HW_TIMEOUT 2
+
+/* Timer heartbeat (500ms) */
+#define WDT_TIMEOUT	(HZ/2)
+
+/* User land timeout */
+#define WDT_HEARTBEAT 15
+static int heartbeat = WDT_HEARTBEAT;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
+	"(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+	"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static struct {
+	void __iomem *fpga;
+	unsigned long next_heartbeat;	/* the next_heartbeat for the timer */
+	unsigned long open;
+	char expect_close;
+	int bootstatus;
+	struct timer_list timer;	/* The timer that pings the watchdog */
+} pikawdt_private;
+
+static struct watchdog_info ident __ro_after_init = {
+	.identity	= DRV_NAME,
+	.options	= WDIOF_CARDRESET |
+			  WDIOF_SETTIMEOUT |
+			  WDIOF_KEEPALIVEPING |
+			  WDIOF_MAGICCLOSE,
+};
+
+/*
+ * Reload the watchdog timer.  (ie, pat the watchdog)
+ */
+static inline void pikawdt_reset(void)
+{
+	/* -- FPGA: Reset Control Register (32bit R/W) (Offset: 0x14) --
+	 * Bit 7,    WTCHDG_EN: When set to 1, the watchdog timer is enabled.
+	 *           Once enabled, it cannot be disabled. The watchdog can be
+	 *           kicked by performing any write access to the reset
+	 *           control register (this register).
+	 * Bit 8-11, WTCHDG_TIMEOUT_SEC: Sets the watchdog timeout value in
+	 *           seconds. Valid ranges are 1 to 15 seconds. The value can
+	 *           be modified dynamically.
+	 */
+	unsigned reset = in_be32(pikawdt_private.fpga + 0x14);
+	/* enable with max timeout - 15 seconds */
+	reset |= (1 << 7) + (WDT_HW_TIMEOUT << 8);
+	out_be32(pikawdt_private.fpga + 0x14, reset);
+}
+
+/*
+ * Timer tick
+ */
+static void pikawdt_ping(struct timer_list *unused)
+{
+	if (time_before(jiffies, pikawdt_private.next_heartbeat) ||
+			(!nowayout && !pikawdt_private.open)) {
+		pikawdt_reset();
+		mod_timer(&pikawdt_private.timer, jiffies + WDT_TIMEOUT);
+	} else
+		pr_crit("I will reset your machine !\n");
+}
+
+
+static void pikawdt_keepalive(void)
+{
+	pikawdt_private.next_heartbeat = jiffies + heartbeat * HZ;
+}
+
+static void pikawdt_start(void)
+{
+	pikawdt_keepalive();
+	mod_timer(&pikawdt_private.timer, jiffies + WDT_TIMEOUT);
+}
+
+/*
+ * Watchdog device is opened, and watchdog starts running.
+ */
+static int pikawdt_open(struct inode *inode, struct file *file)
+{
+	/* /dev/watchdog can only be opened once */
+	if (test_and_set_bit(0, &pikawdt_private.open))
+		return -EBUSY;
+
+	pikawdt_start();
+
+	return nonseekable_open(inode, file);
+}
+
+/*
+ * Close the watchdog device.
+ */
+static int pikawdt_release(struct inode *inode, struct file *file)
+{
+	/* stop internal ping */
+	if (!pikawdt_private.expect_close)
+		del_timer(&pikawdt_private.timer);
+
+	clear_bit(0, &pikawdt_private.open);
+	pikawdt_private.expect_close = 0;
+	return 0;
+}
+
+/*
+ * Pat the watchdog whenever device is written to.
+ */
+static ssize_t pikawdt_write(struct file *file, const char __user *data,
+			     size_t len, loff_t *ppos)
+{
+	if (!len)
+		return 0;
+
+	/* Scan for magic character */
+	if (!nowayout) {
+		size_t i;
+
+		pikawdt_private.expect_close = 0;
+
+		for (i = 0; i < len; i++) {
+			char c;
+			if (get_user(c, data + i))
+				return -EFAULT;
+			if (c == 'V') {
+				pikawdt_private.expect_close = 42;
+				break;
+			}
+		}
+	}
+
+	pikawdt_keepalive();
+
+	return len;
+}
+
+/*
+ * Handle commands from user-space.
+ */
+static long pikawdt_ioctl(struct file *file,
+		unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int new_value;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(pikawdt_private.bootstatus, p);
+
+	case WDIOC_KEEPALIVE:
+		pikawdt_keepalive();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_value, p))
+			return -EFAULT;
+
+		heartbeat = new_value;
+		pikawdt_keepalive();
+
+		return put_user(new_value, p);  /* return current value */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+	}
+	return -ENOTTY;
+}
+
+
+static const struct file_operations pikawdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.open		= pikawdt_open,
+	.release	= pikawdt_release,
+	.write		= pikawdt_write,
+	.unlocked_ioctl	= pikawdt_ioctl,
+};
+
+static struct miscdevice pikawdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &pikawdt_fops,
+};
+
+static int __init pikawdt_init(void)
+{
+	struct device_node *np;
+	void __iomem *fpga;
+	static u32 post1;
+	int ret;
+
+	np = of_find_compatible_node(NULL, NULL, "pika,fpga");
+	if (np == NULL) {
+		pr_err("Unable to find fpga\n");
+		return -ENOENT;
+	}
+
+	pikawdt_private.fpga = of_iomap(np, 0);
+	of_node_put(np);
+	if (pikawdt_private.fpga == NULL) {
+		pr_err("Unable to map fpga\n");
+		return -ENOMEM;
+	}
+
+	ident.firmware_version = in_be32(pikawdt_private.fpga + 0x1c) & 0xffff;
+
+	/* POST information is in the sd area. */
+	np = of_find_compatible_node(NULL, NULL, "pika,fpga-sd");
+	if (np == NULL) {
+		pr_err("Unable to find fpga-sd\n");
+		ret = -ENOENT;
+		goto out;
+	}
+
+	fpga = of_iomap(np, 0);
+	of_node_put(np);
+	if (fpga == NULL) {
+		pr_err("Unable to map fpga-sd\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* -- FPGA: POST Test Results Register 1 (32bit R/W) (Offset: 0x4040) --
+	 * Bit 31,   WDOG: Set to 1 when the last reset was caused by a watchdog
+	 *           timeout.
+	 */
+	post1 = in_be32(fpga + 0x40);
+	if (post1 & 0x80000000)
+		pikawdt_private.bootstatus = WDIOF_CARDRESET;
+
+	iounmap(fpga);
+
+	timer_setup(&pikawdt_private.timer, pikawdt_ping, 0);
+
+	ret = misc_register(&pikawdt_miscdev);
+	if (ret) {
+		pr_err("Unable to register miscdev\n");
+		goto out;
+	}
+
+	pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n",
+		heartbeat, nowayout);
+	return 0;
+
+out:
+	iounmap(pikawdt_private.fpga);
+	return ret;
+}
+
+static void __exit pikawdt_exit(void)
+{
+	misc_deregister(&pikawdt_miscdev);
+
+	iounmap(pikawdt_private.fpga);
+}
+
+module_init(pikawdt_init);
+module_exit(pikawdt_exit);
+
+MODULE_AUTHOR("Sean MacLennan <smaclennan@pikatech.com>");
+MODULE_DESCRIPTION("PIKA FPGA based Watchdog Timer");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
new file mode 100644
index 000000000..8e261799c
--- /dev/null
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -0,0 +1,272 @@
+/*
+ * drivers/char/watchdog/pnx4008_wdt.c
+ *
+ * Watchdog driver for PNX4008 board
+ *
+ * Authors: Dmitry Chigirev <source@mvista.com>,
+ *	    Vitaly Wool <vitalywool@gmail.com>
+ * Based on sa1100 driver,
+ * Copyright (C) 2000 Oleg Drokin <green@crimea.edu>
+ *
+ * 2005-2006 (c) MontaVista Software, Inc.
+ *
+ * (C) 2012 Wolfram Sang, Pengutronix
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <mach/hardware.h>
+
+/* WatchDog Timer - Chapter 23 Page 207 */
+
+#define DEFAULT_HEARTBEAT 19
+#define MAX_HEARTBEAT     60
+
+/* Watchdog timer register set definition */
+#define WDTIM_INT(p)     ((p) + 0x0)
+#define WDTIM_CTRL(p)    ((p) + 0x4)
+#define WDTIM_COUNTER(p) ((p) + 0x8)
+#define WDTIM_MCTRL(p)   ((p) + 0xC)
+#define WDTIM_MATCH0(p)  ((p) + 0x10)
+#define WDTIM_EMR(p)     ((p) + 0x14)
+#define WDTIM_PULSE(p)   ((p) + 0x18)
+#define WDTIM_RES(p)     ((p) + 0x1C)
+
+/* WDTIM_INT bit definitions */
+#define MATCH_INT      1
+
+/* WDTIM_CTRL bit definitions */
+#define COUNT_ENAB     1
+#define RESET_COUNT    (1 << 1)
+#define DEBUG_EN       (1 << 2)
+
+/* WDTIM_MCTRL bit definitions */
+#define MR0_INT        1
+#undef  RESET_COUNT0
+#define RESET_COUNT0   (1 << 2)
+#define STOP_COUNT0    (1 << 2)
+#define M_RES1         (1 << 3)
+#define M_RES2         (1 << 4)
+#define RESFRC1        (1 << 5)
+#define RESFRC2        (1 << 6)
+
+/* WDTIM_EMR bit definitions */
+#define EXT_MATCH0      1
+#define MATCH_OUTPUT_HIGH (2 << 4)	/*a MATCH_CTRL setting */
+
+/* WDTIM_RES bit definitions */
+#define WDOG_RESET      1	/* read only */
+
+#define WDOG_COUNTER_RATE 13000000	/*the counter clock is 13 MHz fixed */
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static unsigned int heartbeat;
+
+static DEFINE_SPINLOCK(io_lock);
+static void __iomem	*wdt_base;
+static struct clk	*wdt_clk;
+
+static int pnx4008_wdt_start(struct watchdog_device *wdd)
+{
+	spin_lock(&io_lock);
+
+	/* stop counter, initiate counter reset */
+	writel(RESET_COUNT, WDTIM_CTRL(wdt_base));
+	/*wait for reset to complete. 100% guarantee event */
+	while (readl(WDTIM_COUNTER(wdt_base)))
+		cpu_relax();
+	/* internal and external reset, stop after that */
+	writel(M_RES2 | STOP_COUNT0 | RESET_COUNT0, WDTIM_MCTRL(wdt_base));
+	/* configure match output */
+	writel(MATCH_OUTPUT_HIGH, WDTIM_EMR(wdt_base));
+	/* clear interrupt, just in case */
+	writel(MATCH_INT, WDTIM_INT(wdt_base));
+	/* the longest pulse period 65541/(13*10^6) seconds ~ 5 ms. */
+	writel(0xFFFF, WDTIM_PULSE(wdt_base));
+	writel(wdd->timeout * WDOG_COUNTER_RATE, WDTIM_MATCH0(wdt_base));
+	/*enable counter, stop when debugger active */
+	writel(COUNT_ENAB | DEBUG_EN, WDTIM_CTRL(wdt_base));
+
+	spin_unlock(&io_lock);
+	return 0;
+}
+
+static int pnx4008_wdt_stop(struct watchdog_device *wdd)
+{
+	spin_lock(&io_lock);
+
+	writel(0, WDTIM_CTRL(wdt_base));	/*stop counter */
+
+	spin_unlock(&io_lock);
+	return 0;
+}
+
+static int pnx4008_wdt_set_timeout(struct watchdog_device *wdd,
+				    unsigned int new_timeout)
+{
+	wdd->timeout = new_timeout;
+	return 0;
+}
+
+static int pnx4008_restart_handler(struct watchdog_device *wdd,
+				   unsigned long mode, void *cmd)
+{
+	const char *boot_cmd = cmd;
+
+	/*
+	 * Verify if a "cmd" passed from the userspace program rebooting
+	 * the system; if available, handle it.
+	 * - For details, see the 'reboot' syscall in kernel/reboot.c
+	 * - If the received "cmd" is not supported, use the default mode.
+	 */
+	if (boot_cmd) {
+		if (boot_cmd[0] == 'h')
+			mode = REBOOT_HARD;
+		else if (boot_cmd[0] == 's')
+			mode = REBOOT_SOFT;
+	}
+
+	if (mode == REBOOT_SOFT) {
+		/* Force match output active */
+		writel(EXT_MATCH0, WDTIM_EMR(wdt_base));
+		/* Internal reset on match output (RESOUT_N not asserted) */
+		writel(M_RES1, WDTIM_MCTRL(wdt_base));
+	} else {
+		/* Instant assert of RESETOUT_N with pulse length 1mS */
+		writel(13000, WDTIM_PULSE(wdt_base));
+		writel(M_RES2 | RESFRC1 | RESFRC2, WDTIM_MCTRL(wdt_base));
+	}
+
+	/* Wait for watchdog to reset system */
+	mdelay(1000);
+
+	return NOTIFY_DONE;
+}
+
+static const struct watchdog_info pnx4008_wdt_ident = {
+	.options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE |
+	    WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.identity = "PNX4008 Watchdog",
+};
+
+static const struct watchdog_ops pnx4008_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = pnx4008_wdt_start,
+	.stop = pnx4008_wdt_stop,
+	.set_timeout = pnx4008_wdt_set_timeout,
+	.restart = pnx4008_restart_handler,
+};
+
+static struct watchdog_device pnx4008_wdd = {
+	.info = &pnx4008_wdt_ident,
+	.ops = &pnx4008_wdt_ops,
+	.timeout = DEFAULT_HEARTBEAT,
+	.min_timeout = 1,
+	.max_timeout = MAX_HEARTBEAT,
+};
+
+static int pnx4008_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *r;
+	int ret = 0;
+
+	watchdog_init_timeout(&pnx4008_wdd, heartbeat, &pdev->dev);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt_base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(wdt_base))
+		return PTR_ERR(wdt_base);
+
+	wdt_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(wdt_clk))
+		return PTR_ERR(wdt_clk);
+
+	ret = clk_prepare_enable(wdt_clk);
+	if (ret)
+		return ret;
+
+	pnx4008_wdd.bootstatus = (readl(WDTIM_RES(wdt_base)) & WDOG_RESET) ?
+			WDIOF_CARDRESET : 0;
+	pnx4008_wdd.parent = &pdev->dev;
+	watchdog_set_nowayout(&pnx4008_wdd, nowayout);
+	watchdog_set_restart_priority(&pnx4008_wdd, 128);
+
+	pnx4008_wdt_stop(&pnx4008_wdd);	/* disable for now */
+
+	ret = watchdog_register_device(&pnx4008_wdd);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "cannot register watchdog device\n");
+		goto disable_clk;
+	}
+
+	dev_info(&pdev->dev, "heartbeat %d sec\n", pnx4008_wdd.timeout);
+
+	return 0;
+
+disable_clk:
+	clk_disable_unprepare(wdt_clk);
+	return ret;
+}
+
+static int pnx4008_wdt_remove(struct platform_device *pdev)
+{
+	watchdog_unregister_device(&pnx4008_wdd);
+
+	clk_disable_unprepare(wdt_clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id pnx4008_wdt_match[] = {
+	{ .compatible = "nxp,pnx4008-wdt" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pnx4008_wdt_match);
+#endif
+
+static struct platform_driver platform_wdt_driver = {
+	.driver = {
+		.name = "pnx4008-watchdog",
+		.of_match_table = of_match_ptr(pnx4008_wdt_match),
+	},
+	.probe = pnx4008_wdt_probe,
+	.remove = pnx4008_wdt_remove,
+};
+
+module_platform_driver(platform_wdt_driver);
+
+MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
+MODULE_AUTHOR("Wolfram Sang <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("PNX4008 Watchdog Driver");
+
+module_param(heartbeat, uint, 0);
+MODULE_PARM_DESC(heartbeat,
+		 "Watchdog heartbeat period in seconds from 1 to "
+		 __MODULE_STRING(MAX_HEARTBEAT) ", default "
+		 __MODULE_STRING(DEFAULT_HEARTBEAT));
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		 "Set to 1 to keep watchdog running after device release");
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pnx4008-watchdog");
diff --git a/drivers/watchdog/pnx833x_wdt.c b/drivers/watchdog/pnx833x_wdt.c
new file mode 100644
index 000000000..882fdcb46
--- /dev/null
+++ b/drivers/watchdog/pnx833x_wdt.c
@@ -0,0 +1,280 @@
+/*
+ *  PNX833x Hardware Watchdog Driver
+ *  Copyright 2008 NXP Semiconductors
+ *  Daniel Laird <daniel.j.laird@nxp.com>
+ *  Andre McCurdy <andre.mccurdy@nxp.com>
+ *
+ *  Heavily based upon - IndyDog	0.3
+ *  A Hardware Watchdog Device for SGI IP22
+ *
+ * (c) Copyright 2002 Guido Guenther <agx@sigxcpu.org>, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * based on softdog.c by Alan Cox <alan@redhat.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <asm/mach-pnx833x/pnx833x.h>
+
+#define WATCHDOG_TIMEOUT 30		/* 30 sec Maximum timeout */
+#define WATCHDOG_COUNT_FREQUENCY 68000000U /* Watchdog counts at 68MHZ. */
+#define	PNX_WATCHDOG_TIMEOUT	(WATCHDOG_TIMEOUT * WATCHDOG_COUNT_FREQUENCY)
+#define PNX_TIMEOUT_VALUE	2040000000U
+
+/** CONFIG block */
+#define PNX833X_CONFIG                      (0x07000U)
+#define PNX833X_CONFIG_CPU_WATCHDOG         (0x54)
+#define PNX833X_CONFIG_CPU_WATCHDOG_COMPARE (0x58)
+#define PNX833X_CONFIG_CPU_COUNTERS_CONTROL (0x1c)
+
+/** RESET block */
+#define PNX833X_RESET                       (0x08000U)
+#define PNX833X_RESET_CONFIG                (0x08)
+
+static int pnx833x_wdt_alive;
+
+/* Set default timeout in MHZ.*/
+static int pnx833x_wdt_timeout = PNX_WATCHDOG_TIMEOUT;
+module_param(pnx833x_wdt_timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in Mhz. (68Mhz clock), default="
+			__MODULE_STRING(PNX_TIMEOUT_VALUE) "(30 seconds).");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+					__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+#define START_DEFAULT	1
+static int start_enabled = START_DEFAULT;
+module_param(start_enabled, int, 0);
+MODULE_PARM_DESC(start_enabled, "Watchdog is started on module insertion "
+				"(default=" __MODULE_STRING(START_DEFAULT) ")");
+
+static void pnx833x_wdt_start(void)
+{
+	/* Enable watchdog causing reset. */
+	PNX833X_REG(PNX833X_RESET + PNX833X_RESET_CONFIG) |= 0x1;
+	/* Set timeout.*/
+	PNX833X_REG(PNX833X_CONFIG +
+		PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout;
+	/* Enable watchdog. */
+	PNX833X_REG(PNX833X_CONFIG +
+				PNX833X_CONFIG_CPU_COUNTERS_CONTROL) |= 0x1;
+
+	pr_info("Started watchdog timer\n");
+}
+
+static void pnx833x_wdt_stop(void)
+{
+	/* Disable watchdog causing reset. */
+	PNX833X_REG(PNX833X_RESET + PNX833X_CONFIG) &= 0xFFFFFFFE;
+	/* Disable watchdog.*/
+	PNX833X_REG(PNX833X_CONFIG +
+			PNX833X_CONFIG_CPU_COUNTERS_CONTROL) &= 0xFFFFFFFE;
+
+	pr_info("Stopped watchdog timer\n");
+}
+
+static void pnx833x_wdt_ping(void)
+{
+	PNX833X_REG(PNX833X_CONFIG +
+		PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = pnx833x_wdt_timeout;
+}
+
+/*
+ *	Allow only one person to hold it open
+ */
+static int pnx833x_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &pnx833x_wdt_alive))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	/* Activate timer */
+	if (!start_enabled)
+		pnx833x_wdt_start();
+
+	pnx833x_wdt_ping();
+
+	pr_info("Started watchdog timer\n");
+
+	return nonseekable_open(inode, file);
+}
+
+static int pnx833x_wdt_release(struct inode *inode, struct file *file)
+{
+	/* Shut off the timer.
+	 * Lock it in if it's a module and we defined ...NOWAYOUT */
+	if (!nowayout)
+		pnx833x_wdt_stop(); /* Turn the WDT off */
+
+	clear_bit(0, &pnx833x_wdt_alive);
+	return 0;
+}
+
+static ssize_t pnx833x_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
+{
+	/* Refresh the timer. */
+	if (len)
+		pnx833x_wdt_ping();
+
+	return len;
+}
+
+static long pnx833x_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	int options, new_timeout = 0;
+	uint32_t timeout, timeout_left = 0;
+
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
+		.firmware_version = 0,
+		.identity = "Hardware Watchdog for PNX833x",
+	};
+
+	switch (cmd) {
+	default:
+		return -ENOTTY;
+
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user((struct watchdog_info *)arg,
+				 &ident, sizeof(ident)))
+			return -EFAULT;
+		return 0;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, (int *)arg);
+
+	case WDIOC_SETOPTIONS:
+		if (get_user(options, (int *)arg))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD)
+			pnx833x_wdt_stop();
+
+		if (options & WDIOS_ENABLECARD)
+			pnx833x_wdt_start();
+
+		return 0;
+
+	case WDIOC_KEEPALIVE:
+		pnx833x_wdt_ping();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+	{
+		if (get_user(new_timeout, (int *)arg))
+			return -EFAULT;
+
+		pnx833x_wdt_timeout = new_timeout;
+		PNX833X_REG(PNX833X_CONFIG +
+			PNX833X_CONFIG_CPU_WATCHDOG_COMPARE) = new_timeout;
+		return put_user(new_timeout, (int *)arg);
+	}
+
+	case WDIOC_GETTIMEOUT:
+		timeout = PNX833X_REG(PNX833X_CONFIG +
+					PNX833X_CONFIG_CPU_WATCHDOG_COMPARE);
+		return put_user(timeout, (int *)arg);
+
+	case WDIOC_GETTIMELEFT:
+		timeout_left = PNX833X_REG(PNX833X_CONFIG +
+						PNX833X_CONFIG_CPU_WATCHDOG);
+		return put_user(timeout_left, (int *)arg);
+
+	}
+}
+
+static int pnx833x_wdt_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		pnx833x_wdt_stop(); /* Turn the WDT off */
+
+	return NOTIFY_DONE;
+}
+
+static const struct file_operations pnx833x_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= pnx833x_wdt_write,
+	.unlocked_ioctl	= pnx833x_wdt_ioctl,
+	.open		= pnx833x_wdt_open,
+	.release	= pnx833x_wdt_release,
+};
+
+static struct miscdevice pnx833x_wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &pnx833x_wdt_fops,
+};
+
+static struct notifier_block pnx833x_wdt_notifier = {
+	.notifier_call = pnx833x_wdt_notify_sys,
+};
+
+static int __init watchdog_init(void)
+{
+	int ret, cause;
+
+	/* Lets check the reason for the reset.*/
+	cause = PNX833X_REG(PNX833X_RESET);
+	/*If bit 31 is set then watchdog was cause of reset.*/
+	if (cause & 0x80000000) {
+		pr_info("The system was previously reset due to the watchdog firing - please investigate...\n");
+	}
+
+	ret = register_reboot_notifier(&pnx833x_wdt_notifier);
+	if (ret) {
+		pr_err("cannot register reboot notifier (err=%d)\n", ret);
+		return ret;
+	}
+
+	ret = misc_register(&pnx833x_wdt_miscdev);
+	if (ret) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, ret);
+		unregister_reboot_notifier(&pnx833x_wdt_notifier);
+		return ret;
+	}
+
+	pr_info("Hardware Watchdog Timer for PNX833x: Version 0.1\n");
+
+	if (start_enabled)
+		pnx833x_wdt_start();
+
+	return 0;
+}
+
+static void __exit watchdog_exit(void)
+{
+	misc_deregister(&pnx833x_wdt_miscdev);
+	unregister_reboot_notifier(&pnx833x_wdt_notifier);
+}
+
+module_init(watchdog_init);
+module_exit(watchdog_exit);
+
+MODULE_AUTHOR("Daniel Laird/Andre McCurdy");
+MODULE_DESCRIPTION("Hardware Watchdog Device for PNX833x");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/pretimeout_noop.c b/drivers/watchdog/pretimeout_noop.c
new file mode 100644
index 000000000..85f5299d1
--- /dev/null
+++ b/drivers/watchdog/pretimeout_noop.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2015-2016 Mentor Graphics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/printk.h>
+#include <linux/watchdog.h>
+
+#include "watchdog_pretimeout.h"
+
+/**
+ * pretimeout_noop - No operation on watchdog pretimeout event
+ * @wdd - watchdog_device
+ *
+ * This function prints a message about pretimeout to kernel log.
+ */
+static void pretimeout_noop(struct watchdog_device *wdd)
+{
+	pr_alert("watchdog%d: pretimeout event\n", wdd->id);
+}
+
+static struct watchdog_governor watchdog_gov_noop = {
+	.name		= "noop",
+	.pretimeout	= pretimeout_noop,
+};
+
+static int __init watchdog_gov_noop_register(void)
+{
+	return watchdog_register_governor(&watchdog_gov_noop);
+}
+
+static void __exit watchdog_gov_noop_unregister(void)
+{
+	watchdog_unregister_governor(&watchdog_gov_noop);
+}
+module_init(watchdog_gov_noop_register);
+module_exit(watchdog_gov_noop_unregister);
+
+MODULE_AUTHOR("Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>");
+MODULE_DESCRIPTION("Panic watchdog pretimeout governor");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/pretimeout_panic.c b/drivers/watchdog/pretimeout_panic.c
new file mode 100644
index 000000000..0c197a1c9
--- /dev/null
+++ b/drivers/watchdog/pretimeout_panic.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2015-2016 Mentor Graphics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+
+#include "watchdog_pretimeout.h"
+
+/**
+ * pretimeout_panic - Panic on watchdog pretimeout event
+ * @wdd - watchdog_device
+ *
+ * Panic, watchdog has not been fed till pretimeout event.
+ */
+static void pretimeout_panic(struct watchdog_device *wdd)
+{
+	panic("watchdog pretimeout event\n");
+}
+
+static struct watchdog_governor watchdog_gov_panic = {
+	.name		= "panic",
+	.pretimeout	= pretimeout_panic,
+};
+
+static int __init watchdog_gov_panic_register(void)
+{
+	return watchdog_register_governor(&watchdog_gov_panic);
+}
+
+static void __exit watchdog_gov_panic_unregister(void)
+{
+	watchdog_unregister_governor(&watchdog_gov_panic);
+}
+module_init(watchdog_gov_panic_register);
+module_exit(watchdog_gov_panic_unregister);
+
+MODULE_AUTHOR("Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>");
+MODULE_DESCRIPTION("Panic watchdog pretimeout governor");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
new file mode 100644
index 000000000..1a0005a8f
--- /dev/null
+++ b/drivers/watchdog/qcom-wdt.c
@@ -0,0 +1,267 @@
+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/of_device.h>
+
+enum wdt_reg {
+	WDT_RST,
+	WDT_EN,
+	WDT_STS,
+	WDT_BARK_TIME,
+	WDT_BITE_TIME,
+};
+
+static const u32 reg_offset_data_apcs_tmr[] = {
+	[WDT_RST] = 0x38,
+	[WDT_EN] = 0x40,
+	[WDT_STS] = 0x44,
+	[WDT_BARK_TIME] = 0x4C,
+	[WDT_BITE_TIME] = 0x5C,
+};
+
+static const u32 reg_offset_data_kpss[] = {
+	[WDT_RST] = 0x4,
+	[WDT_EN] = 0x8,
+	[WDT_STS] = 0xC,
+	[WDT_BARK_TIME] = 0x10,
+	[WDT_BITE_TIME] = 0x14,
+};
+
+struct qcom_wdt {
+	struct watchdog_device	wdd;
+	struct clk		*clk;
+	unsigned long		rate;
+	void __iomem		*base;
+	const u32		*layout;
+};
+
+static void __iomem *wdt_addr(struct qcom_wdt *wdt, enum wdt_reg reg)
+{
+	return wdt->base + wdt->layout[reg];
+}
+
+static inline
+struct qcom_wdt *to_qcom_wdt(struct watchdog_device *wdd)
+{
+	return container_of(wdd, struct qcom_wdt, wdd);
+}
+
+static int qcom_wdt_start(struct watchdog_device *wdd)
+{
+	struct qcom_wdt *wdt = to_qcom_wdt(wdd);
+
+	writel(0, wdt_addr(wdt, WDT_EN));
+	writel(1, wdt_addr(wdt, WDT_RST));
+	writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BARK_TIME));
+	writel(wdd->timeout * wdt->rate, wdt_addr(wdt, WDT_BITE_TIME));
+	writel(1, wdt_addr(wdt, WDT_EN));
+	return 0;
+}
+
+static int qcom_wdt_stop(struct watchdog_device *wdd)
+{
+	struct qcom_wdt *wdt = to_qcom_wdt(wdd);
+
+	writel(0, wdt_addr(wdt, WDT_EN));
+	return 0;
+}
+
+static int qcom_wdt_ping(struct watchdog_device *wdd)
+{
+	struct qcom_wdt *wdt = to_qcom_wdt(wdd);
+
+	writel(1, wdt_addr(wdt, WDT_RST));
+	return 0;
+}
+
+static int qcom_wdt_set_timeout(struct watchdog_device *wdd,
+				unsigned int timeout)
+{
+	wdd->timeout = timeout;
+	return qcom_wdt_start(wdd);
+}
+
+static int qcom_wdt_restart(struct watchdog_device *wdd, unsigned long action,
+			    void *data)
+{
+	struct qcom_wdt *wdt = to_qcom_wdt(wdd);
+	u32 timeout;
+
+	/*
+	 * Trigger watchdog bite:
+	 *    Setup BITE_TIME to be 128ms, and enable WDT.
+	 */
+	timeout = 128 * wdt->rate / 1000;
+
+	writel(0, wdt_addr(wdt, WDT_EN));
+	writel(1, wdt_addr(wdt, WDT_RST));
+	writel(timeout, wdt_addr(wdt, WDT_BARK_TIME));
+	writel(timeout, wdt_addr(wdt, WDT_BITE_TIME));
+	writel(1, wdt_addr(wdt, WDT_EN));
+
+	/*
+	 * Actually make sure the above sequence hits hardware before sleeping.
+	 */
+	wmb();
+
+	mdelay(150);
+	return 0;
+}
+
+static const struct watchdog_ops qcom_wdt_ops = {
+	.start		= qcom_wdt_start,
+	.stop		= qcom_wdt_stop,
+	.ping		= qcom_wdt_ping,
+	.set_timeout	= qcom_wdt_set_timeout,
+	.restart        = qcom_wdt_restart,
+	.owner		= THIS_MODULE,
+};
+
+static const struct watchdog_info qcom_wdt_info = {
+	.options	= WDIOF_KEEPALIVEPING
+			| WDIOF_MAGICCLOSE
+			| WDIOF_SETTIMEOUT
+			| WDIOF_CARDRESET,
+	.identity	= KBUILD_MODNAME,
+};
+
+static int qcom_wdt_probe(struct platform_device *pdev)
+{
+	struct qcom_wdt *wdt;
+	struct resource *res;
+	struct device_node *np = pdev->dev.of_node;
+	const u32 *regs;
+	u32 percpu_offset;
+	int ret;
+
+	regs = of_device_get_match_data(&pdev->dev);
+	if (!regs) {
+		dev_err(&pdev->dev, "Unsupported QCOM WDT module\n");
+		return -ENODEV;
+	}
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOMEM;
+
+	/* We use CPU0's DGT for the watchdog */
+	if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
+		percpu_offset = 0;
+
+	res->start += percpu_offset;
+	res->end += percpu_offset;
+
+	wdt->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(wdt->base))
+		return PTR_ERR(wdt->base);
+
+	wdt->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(wdt->clk)) {
+		dev_err(&pdev->dev, "failed to get input clock\n");
+		return PTR_ERR(wdt->clk);
+	}
+
+	ret = clk_prepare_enable(wdt->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to setup clock\n");
+		return ret;
+	}
+
+	/*
+	 * We use the clock rate to calculate the max timeout, so ensure it's
+	 * not zero to avoid a divide-by-zero exception.
+	 *
+	 * WATCHDOG_CORE assumes units of seconds, if the WDT is clocked such
+	 * that it would bite before a second elapses it's usefulness is
+	 * limited.  Bail if this is the case.
+	 */
+	wdt->rate = clk_get_rate(wdt->clk);
+	if (wdt->rate == 0 ||
+	    wdt->rate > 0x10000000U) {
+		dev_err(&pdev->dev, "invalid clock rate\n");
+		ret = -EINVAL;
+		goto err_clk_unprepare;
+	}
+
+	wdt->wdd.info = &qcom_wdt_info;
+	wdt->wdd.ops = &qcom_wdt_ops;
+	wdt->wdd.min_timeout = 1;
+	wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
+	wdt->wdd.parent = &pdev->dev;
+	wdt->layout = regs;
+
+	if (readl(wdt_addr(wdt, WDT_STS)) & 1)
+		wdt->wdd.bootstatus = WDIOF_CARDRESET;
+
+	/*
+	 * If 'timeout-sec' unspecified in devicetree, assume a 30 second
+	 * default, unless the max timeout is less than 30 seconds, then use
+	 * the max instead.
+	 */
+	wdt->wdd.timeout = min(wdt->wdd.max_timeout, 30U);
+	watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev);
+
+	ret = watchdog_register_device(&wdt->wdd);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register watchdog\n");
+		goto err_clk_unprepare;
+	}
+
+	platform_set_drvdata(pdev, wdt);
+	return 0;
+
+err_clk_unprepare:
+	clk_disable_unprepare(wdt->clk);
+	return ret;
+}
+
+static int qcom_wdt_remove(struct platform_device *pdev)
+{
+	struct qcom_wdt *wdt = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&wdt->wdd);
+	clk_disable_unprepare(wdt->clk);
+	return 0;
+}
+
+static const struct of_device_id qcom_wdt_of_table[] = {
+	{ .compatible = "qcom,kpss-timer", .data = reg_offset_data_apcs_tmr },
+	{ .compatible = "qcom,scss-timer", .data = reg_offset_data_apcs_tmr },
+	{ .compatible = "qcom,kpss-wdt", .data = reg_offset_data_kpss },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);
+
+static struct platform_driver qcom_watchdog_driver = {
+	.probe	= qcom_wdt_probe,
+	.remove	= qcom_wdt_remove,
+	.driver	= {
+		.name		= KBUILD_MODNAME,
+		.of_match_table	= qcom_wdt_of_table,
+	},
+};
+module_platform_driver(qcom_watchdog_driver);
+
+MODULE_DESCRIPTION("QCOM KPSS Watchdog Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/watchdog/rave-sp-wdt.c b/drivers/watchdog/rave-sp-wdt.c
new file mode 100644
index 000000000..35db17325
--- /dev/null
+++ b/drivers/watchdog/rave-sp-wdt.c
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Driver for watchdog aspect of for Zodiac Inflight Innovations RAVE
+ * Supervisory Processor(SP) MCU
+ *
+ * Copyright (C) 2017 Zodiac Inflight Innovation
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/mfd/rave-sp.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/watchdog.h>
+
+enum {
+	RAVE_SP_RESET_BYTE = 1,
+	RAVE_SP_RESET_REASON_NORMAL = 0,
+	RAVE_SP_RESET_DELAY_MS = 500,
+};
+
+/**
+ * struct rave_sp_wdt_variant - RAVE SP watchdog variant
+ *
+ * @max_timeout:	Largest possible watchdog timeout setting
+ * @min_timeout:	Smallest possible watchdog timeout setting
+ *
+ * @configure:		Function to send configuration command
+ * @restart:		Function to send "restart" command
+ */
+struct rave_sp_wdt_variant {
+	unsigned int max_timeout;
+	unsigned int min_timeout;
+
+	int (*configure)(struct watchdog_device *, bool);
+	int (*restart)(struct watchdog_device *);
+};
+
+/**
+ * struct rave_sp_wdt - RAVE SP watchdog
+ *
+ * @wdd:		Underlying watchdog device
+ * @sp:			Pointer to parent RAVE SP device
+ * @variant:		Device specific variant information
+ * @reboot_notifier:	Reboot notifier implementing machine reset
+ */
+struct rave_sp_wdt {
+	struct watchdog_device wdd;
+	struct rave_sp *sp;
+	const struct rave_sp_wdt_variant *variant;
+	struct notifier_block reboot_notifier;
+};
+
+static struct rave_sp_wdt *to_rave_sp_wdt(struct watchdog_device *wdd)
+{
+	return container_of(wdd, struct rave_sp_wdt, wdd);
+}
+
+static int rave_sp_wdt_exec(struct watchdog_device *wdd, void *data,
+			    size_t data_size)
+{
+	return rave_sp_exec(to_rave_sp_wdt(wdd)->sp,
+			    data, data_size, NULL, 0);
+}
+
+static int rave_sp_wdt_legacy_configure(struct watchdog_device *wdd, bool on)
+{
+	u8 cmd[] = {
+		[0] = RAVE_SP_CMD_SW_WDT,
+		[1] = 0,
+		[2] = 0,
+		[3] = on,
+		[4] = on ? wdd->timeout : 0,
+	};
+
+	return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
+}
+
+static int rave_sp_wdt_rdu_configure(struct watchdog_device *wdd, bool on)
+{
+	u8 cmd[] = {
+		[0] = RAVE_SP_CMD_SW_WDT,
+		[1] = 0,
+		[2] = on,
+		[3] = (u8)wdd->timeout,
+		[4] = (u8)(wdd->timeout >> 8),
+	};
+
+	return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
+}
+
+/**
+ * rave_sp_wdt_configure - Configure watchdog device
+ *
+ * @wdd:	Device to configure
+ * @on:		Desired state of the watchdog timer (ON/OFF)
+ *
+ * This function configures two aspects of the watchdog timer:
+ *
+ *  - Wheither it is ON or OFF
+ *  - Its timeout duration
+ *
+ * with first aspect specified via function argument and second via
+ * the value of 'wdd->timeout'.
+ */
+static int rave_sp_wdt_configure(struct watchdog_device *wdd, bool on)
+{
+	return to_rave_sp_wdt(wdd)->variant->configure(wdd, on);
+}
+
+static int rave_sp_wdt_legacy_restart(struct watchdog_device *wdd)
+{
+	u8 cmd[] = {
+		[0] = RAVE_SP_CMD_RESET,
+		[1] = 0,
+		[2] = RAVE_SP_RESET_BYTE
+	};
+
+	return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
+}
+
+static int rave_sp_wdt_rdu_restart(struct watchdog_device *wdd)
+{
+	u8 cmd[] = {
+		[0] = RAVE_SP_CMD_RESET,
+		[1] = 0,
+		[2] = RAVE_SP_RESET_BYTE,
+		[3] = RAVE_SP_RESET_REASON_NORMAL
+	};
+
+	return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
+}
+
+static int rave_sp_wdt_reboot_notifier(struct notifier_block *nb,
+				       unsigned long action, void *data)
+{
+	/*
+	 * Restart handler is called in atomic context which means we
+	 * can't communicate to SP via UART. Luckily for use SP will
+	 * wait 500ms before actually resetting us, so we ask it to do
+	 * so here and let the rest of the system go on wrapping
+	 * things up.
+	 */
+	if (action == SYS_DOWN || action == SYS_HALT) {
+		struct rave_sp_wdt *sp_wd =
+			container_of(nb, struct rave_sp_wdt, reboot_notifier);
+
+		const int ret = sp_wd->variant->restart(&sp_wd->wdd);
+
+		if (ret < 0)
+			dev_err(sp_wd->wdd.parent,
+				"Failed to issue restart command (%d)", ret);
+		return NOTIFY_OK;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static int rave_sp_wdt_restart(struct watchdog_device *wdd,
+			       unsigned long action, void *data)
+{
+	/*
+	 * The actual work was done by reboot notifier above. SP
+	 * firmware waits 500 ms before issuing reset, so let's hang
+	 * here for twice that delay and hopefuly we'd never reach
+	 * the return statement.
+	 */
+	mdelay(2 * RAVE_SP_RESET_DELAY_MS);
+
+	return -EIO;
+}
+
+static int rave_sp_wdt_start(struct watchdog_device *wdd)
+{
+	int ret;
+
+	ret = rave_sp_wdt_configure(wdd, true);
+	if (!ret)
+		set_bit(WDOG_HW_RUNNING, &wdd->status);
+
+	return ret;
+}
+
+static int rave_sp_wdt_stop(struct watchdog_device *wdd)
+{
+	return rave_sp_wdt_configure(wdd, false);
+}
+
+static int rave_sp_wdt_set_timeout(struct watchdog_device *wdd,
+				   unsigned int timeout)
+{
+	wdd->timeout = timeout;
+
+	return rave_sp_wdt_configure(wdd, watchdog_active(wdd));
+}
+
+static int rave_sp_wdt_ping(struct watchdog_device *wdd)
+{
+	u8 cmd[] = {
+		[0] = RAVE_SP_CMD_PET_WDT,
+		[1] = 0,
+	};
+
+	return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
+}
+
+static const struct watchdog_info rave_sp_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "RAVE SP Watchdog",
+};
+
+static const struct watchdog_ops rave_sp_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = rave_sp_wdt_start,
+	.stop = rave_sp_wdt_stop,
+	.ping = rave_sp_wdt_ping,
+	.set_timeout = rave_sp_wdt_set_timeout,
+	.restart = rave_sp_wdt_restart,
+};
+
+static const struct rave_sp_wdt_variant rave_sp_wdt_legacy = {
+	.max_timeout = 255,
+	.min_timeout = 1,
+	.configure = rave_sp_wdt_legacy_configure,
+	.restart   = rave_sp_wdt_legacy_restart,
+};
+
+static const struct rave_sp_wdt_variant rave_sp_wdt_rdu = {
+	.max_timeout = 180,
+	.min_timeout = 60,
+	.configure = rave_sp_wdt_rdu_configure,
+	.restart   = rave_sp_wdt_rdu_restart,
+};
+
+static const struct of_device_id rave_sp_wdt_of_match[] = {
+	{
+		.compatible = "zii,rave-sp-watchdog-legacy",
+		.data = &rave_sp_wdt_legacy,
+	},
+	{
+		.compatible = "zii,rave-sp-watchdog",
+		.data = &rave_sp_wdt_rdu,
+	},
+	{ /* sentinel */ }
+};
+
+static int rave_sp_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct watchdog_device *wdd;
+	struct rave_sp_wdt *sp_wd;
+	struct nvmem_cell *cell;
+	__le16 timeout = 0;
+	int ret;
+
+	sp_wd = devm_kzalloc(dev, sizeof(*sp_wd), GFP_KERNEL);
+	if (!sp_wd)
+		return -ENOMEM;
+
+	sp_wd->variant = of_device_get_match_data(dev);
+	sp_wd->sp      = dev_get_drvdata(dev->parent);
+
+	wdd              = &sp_wd->wdd;
+	wdd->parent      = dev;
+	wdd->info        = &rave_sp_wdt_info;
+	wdd->ops         = &rave_sp_wdt_ops;
+	wdd->min_timeout = sp_wd->variant->min_timeout;
+	wdd->max_timeout = sp_wd->variant->max_timeout;
+	wdd->status      = WATCHDOG_NOWAYOUT_INIT_STATUS;
+	wdd->timeout     = 60;
+
+	cell = nvmem_cell_get(dev, "wdt-timeout");
+	if (!IS_ERR(cell)) {
+		size_t len;
+		void *value = nvmem_cell_read(cell, &len);
+
+		if (!IS_ERR(value)) {
+			memcpy(&timeout, value, min(len, sizeof(timeout)));
+			kfree(value);
+		}
+		nvmem_cell_put(cell);
+	}
+	watchdog_init_timeout(wdd, le16_to_cpu(timeout), dev);
+	watchdog_set_restart_priority(wdd, 255);
+	watchdog_stop_on_unregister(wdd);
+
+	sp_wd->reboot_notifier.notifier_call = rave_sp_wdt_reboot_notifier;
+	ret = devm_register_reboot_notifier(dev, &sp_wd->reboot_notifier);
+	if (ret) {
+		dev_err(dev, "Failed to register reboot notifier\n");
+		return ret;
+	}
+
+	/*
+	 * We don't know if watchdog is running now. To be sure, let's
+	 * start it and depend on watchdog core to ping it
+	 */
+	wdd->max_hw_heartbeat_ms = wdd->max_timeout * 1000;
+	ret = rave_sp_wdt_start(wdd);
+	if (ret) {
+		dev_err(dev, "Watchdog didn't start\n");
+		return ret;
+	}
+
+	ret = devm_watchdog_register_device(dev, wdd);
+	if (ret) {
+		dev_err(dev, "Failed to register watchdog device\n");
+		rave_sp_wdt_stop(wdd);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver rave_sp_wdt_driver = {
+	.probe = rave_sp_wdt_probe,
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = rave_sp_wdt_of_match,
+	},
+};
+
+module_platform_driver(rave_sp_wdt_driver);
+
+MODULE_DEVICE_TABLE(of, rave_sp_wdt_of_match);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrey Vostrikov <andrey.vostrikov@cogentembedded.com>");
+MODULE_AUTHOR("Nikita Yushchenko <nikita.yoush@cogentembedded.com>");
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_DESCRIPTION("RAVE SP Watchdog driver");
+MODULE_ALIAS("platform:rave-sp-watchdog");
diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c
new file mode 100644
index 000000000..3a75f3b53
--- /dev/null
+++ b/drivers/watchdog/rc32434_wdt.c
@@ -0,0 +1,330 @@
+/*
+ *  IDT Interprise 79RC32434 watchdog driver
+ *
+ *  Copyright (C) 2006, Ondrej Zajicek <santiago@crfreenet.org>
+ *  Copyright (C) 2008, Florian Fainelli <florian@openwrt.org>
+ *
+ *  based on
+ *  SoftDog 0.05:	A Software Watchdog Device
+ *
+ *  (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *					All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>		/* For module specific items */
+#include <linux/moduleparam.h>		/* For new moduleparam's */
+#include <linux/types.h>		/* For standard types (like size_t) */
+#include <linux/errno.h>		/* For the -ENODEV/... values */
+#include <linux/kernel.h>		/* For printk/panic/... */
+#include <linux/fs.h>			/* For file operations */
+#include <linux/miscdevice.h>		/* For struct miscdevice */
+#include <linux/watchdog.h>		/* For the watchdog specific items */
+#include <linux/init.h>			/* For __init/__exit/... */
+#include <linux/platform_device.h>	/* For platform_driver framework */
+#include <linux/spinlock.h>		/* For spin_lock/spin_unlock/... */
+#include <linux/uaccess.h>		/* For copy_to_user/put_user/... */
+#include <linux/io.h>			/* For devm_ioremap_nocache */
+
+#include <asm/mach-rc32434/integ.h>	/* For the Watchdog registers */
+
+#define VERSION "1.0"
+
+static struct {
+	unsigned long inuse;
+	spinlock_t io_lock;
+} rc32434_wdt_device;
+
+static struct integ __iomem *wdt_reg;
+
+static int expect_close;
+
+/* Board internal clock speed in Hz,
+ * the watchdog timer ticks at. */
+extern unsigned int idt_cpu_freq;
+
+/* translate wtcompare value to seconds and vice versa */
+#define WTCOMP2SEC(x)	(x / idt_cpu_freq)
+#define SEC2WTCOMP(x)	(x * idt_cpu_freq)
+
+/* Use a default timeout of 20s. This should be
+ * safe for CPU clock speeds up to 400MHz, as
+ * ((2 ^ 32) - 1) / (400MHz / 2) = 21s.  */
+#define WATCHDOG_TIMEOUT 20
+
+static int timeout = WATCHDOG_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout value, in seconds (default="
+		__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/* apply or and nand masks to data read from addr and write back */
+#define SET_BITS(addr, or, nand) \
+	writel((readl(&addr) | or) & ~nand, &addr)
+
+static int rc32434_wdt_set(int new_timeout)
+{
+	int max_to = WTCOMP2SEC((u32)-1);
+
+	if (new_timeout < 0 || new_timeout > max_to) {
+		pr_err("timeout value must be between 0 and %d\n", max_to);
+		return -EINVAL;
+	}
+	timeout = new_timeout;
+	spin_lock(&rc32434_wdt_device.io_lock);
+	writel(SEC2WTCOMP(timeout), &wdt_reg->wtcompare);
+	spin_unlock(&rc32434_wdt_device.io_lock);
+
+	return 0;
+}
+
+static void rc32434_wdt_start(void)
+{
+	u32 or, nand;
+
+	spin_lock(&rc32434_wdt_device.io_lock);
+
+	/* zero the counter before enabling */
+	writel(0, &wdt_reg->wtcount);
+
+	/* don't generate a non-maskable interrupt,
+	 * do a warm reset instead */
+	nand = 1 << RC32434_ERR_WNE;
+	or = 1 << RC32434_ERR_WRE;
+
+	/* reset the ERRCS timeout bit in case it's set */
+	nand |= 1 << RC32434_ERR_WTO;
+
+	SET_BITS(wdt_reg->errcs, or, nand);
+
+	/* set the timeout (either default or based on module param) */
+	rc32434_wdt_set(timeout);
+
+	/* reset WTC timeout bit and enable WDT */
+	nand = 1 << RC32434_WTC_TO;
+	or = 1 << RC32434_WTC_EN;
+
+	SET_BITS(wdt_reg->wtc, or, nand);
+
+	spin_unlock(&rc32434_wdt_device.io_lock);
+	pr_info("Started watchdog timer\n");
+}
+
+static void rc32434_wdt_stop(void)
+{
+	spin_lock(&rc32434_wdt_device.io_lock);
+
+	/* Disable WDT */
+	SET_BITS(wdt_reg->wtc, 0, 1 << RC32434_WTC_EN);
+
+	spin_unlock(&rc32434_wdt_device.io_lock);
+	pr_info("Stopped watchdog timer\n");
+}
+
+static void rc32434_wdt_ping(void)
+{
+	spin_lock(&rc32434_wdt_device.io_lock);
+	writel(0, &wdt_reg->wtcount);
+	spin_unlock(&rc32434_wdt_device.io_lock);
+}
+
+static int rc32434_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &rc32434_wdt_device.inuse))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	rc32434_wdt_start();
+	rc32434_wdt_ping();
+
+	return nonseekable_open(inode, file);
+}
+
+static int rc32434_wdt_release(struct inode *inode, struct file *file)
+{
+	if (expect_close == 42) {
+		rc32434_wdt_stop();
+		module_put(THIS_MODULE);
+	} else {
+		pr_crit("device closed unexpectedly. WDT will not stop!\n");
+		rc32434_wdt_ping();
+	}
+	clear_bit(0, &rc32434_wdt_device.inuse);
+	return 0;
+}
+
+static ssize_t rc32434_wdt_write(struct file *file, const char *data,
+				size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			expect_close = 0;
+
+			for (i = 0; i != len; i++) {
+				char c;
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+		rc32434_wdt_ping();
+		return len;
+	}
+	return 0;
+}
+
+static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd,
+				unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int new_timeout;
+	unsigned int value;
+	static const struct watchdog_info ident = {
+		.options =		WDIOF_SETTIMEOUT |
+					WDIOF_KEEPALIVEPING |
+					WDIOF_MAGICCLOSE,
+		.identity =		"RC32434_WDT Watchdog",
+	};
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		value = 0;
+		if (copy_to_user(argp, &value, sizeof(int)))
+			return -EFAULT;
+		break;
+	case WDIOC_SETOPTIONS:
+		if (copy_from_user(&value, argp, sizeof(int)))
+			return -EFAULT;
+		switch (value) {
+		case WDIOS_ENABLECARD:
+			rc32434_wdt_start();
+			break;
+		case WDIOS_DISABLECARD:
+			rc32434_wdt_stop();
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case WDIOC_KEEPALIVE:
+		rc32434_wdt_ping();
+		break;
+	case WDIOC_SETTIMEOUT:
+		if (copy_from_user(&new_timeout, argp, sizeof(int)))
+			return -EFAULT;
+		if (rc32434_wdt_set(new_timeout))
+			return -EINVAL;
+		/* Fall through */
+	case WDIOC_GETTIMEOUT:
+		return copy_to_user(argp, &timeout, sizeof(int)) ? -EFAULT : 0;
+	default:
+		return -ENOTTY;
+	}
+
+	return 0;
+}
+
+static const struct file_operations rc32434_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= rc32434_wdt_write,
+	.unlocked_ioctl	= rc32434_wdt_ioctl,
+	.open		= rc32434_wdt_open,
+	.release	= rc32434_wdt_release,
+};
+
+static struct miscdevice rc32434_wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &rc32434_wdt_fops,
+};
+
+static int rc32434_wdt_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct resource *r;
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res");
+	if (!r) {
+		pr_err("failed to retrieve resources\n");
+		return -ENODEV;
+	}
+
+	wdt_reg = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r));
+	if (!wdt_reg) {
+		pr_err("failed to remap I/O resources\n");
+		return -ENXIO;
+	}
+
+	spin_lock_init(&rc32434_wdt_device.io_lock);
+
+	/* Make sure the watchdog is not running */
+	rc32434_wdt_stop();
+
+	/* Check that the heartbeat value is within it's range;
+	 * if not reset to the default */
+	if (rc32434_wdt_set(timeout)) {
+		rc32434_wdt_set(WATCHDOG_TIMEOUT);
+		pr_info("timeout value must be between 0 and %d\n",
+			WTCOMP2SEC((u32)-1));
+	}
+
+	ret = misc_register(&rc32434_wdt_miscdev);
+	if (ret < 0) {
+		pr_err("failed to register watchdog device\n");
+		return ret;
+	}
+
+	pr_info("Watchdog Timer version " VERSION ", timer margin: %d sec\n",
+		timeout);
+
+	return 0;
+}
+
+static int rc32434_wdt_remove(struct platform_device *pdev)
+{
+	misc_deregister(&rc32434_wdt_miscdev);
+	return 0;
+}
+
+static void rc32434_wdt_shutdown(struct platform_device *pdev)
+{
+	rc32434_wdt_stop();
+}
+
+static struct platform_driver rc32434_wdt_driver = {
+	.probe		= rc32434_wdt_probe,
+	.remove		= rc32434_wdt_remove,
+	.shutdown	= rc32434_wdt_shutdown,
+	.driver		= {
+			.name = "rc32434_wdt",
+	}
+};
+
+module_platform_driver(rc32434_wdt_driver);
+
+MODULE_AUTHOR("Ondrej Zajicek <santiago@crfreenet.org>,"
+		"Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("Driver for the IDT RC32434 SoC watchdog");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c
new file mode 100644
index 000000000..4c3b4ea4e
--- /dev/null
+++ b/drivers/watchdog/rdc321x_wdt.c
@@ -0,0 +1,297 @@
+/*
+ * RDC321x watchdog driver
+ *
+ * Copyright (C) 2007-2010 Florian Fainelli <florian@openwrt.org>
+ *
+ * This driver is highly inspired from the cpu5_wdt driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/mfd/rdc321x.h>
+
+#define RDC_WDT_MASK	0x80000000 /* Mask */
+#define RDC_WDT_EN	0x00800000 /* Enable bit */
+#define RDC_WDT_WTI	0x00200000 /* Generate CPU reset/NMI/WDT on timeout */
+#define RDC_WDT_RST	0x00100000 /* Reset bit */
+#define RDC_WDT_WIF	0x00040000 /* WDT IRQ Flag */
+#define RDC_WDT_IRT	0x00000100 /* IRQ Routing table */
+#define RDC_WDT_CNT	0x00000001 /* WDT count */
+
+#define RDC_CLS_TMR	0x80003844 /* Clear timer */
+
+#define RDC_WDT_INTERVAL	(HZ/10+1)
+
+static int ticks = 1000;
+
+/* some device data */
+
+static struct {
+	struct completion stop;
+	int running;
+	struct timer_list timer;
+	int queue;
+	int default_ticks;
+	unsigned long inuse;
+	spinlock_t lock;
+	struct pci_dev *sb_pdev;
+	int base_reg;
+} rdc321x_wdt_device;
+
+/* generic helper functions */
+
+static void rdc321x_wdt_trigger(struct timer_list *unused)
+{
+	unsigned long flags;
+	u32 val;
+
+	if (rdc321x_wdt_device.running)
+		ticks--;
+
+	/* keep watchdog alive */
+	spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
+	pci_read_config_dword(rdc321x_wdt_device.sb_pdev,
+					rdc321x_wdt_device.base_reg, &val);
+	val |= RDC_WDT_EN;
+	pci_write_config_dword(rdc321x_wdt_device.sb_pdev,
+					rdc321x_wdt_device.base_reg, val);
+	spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
+
+	/* requeue?? */
+	if (rdc321x_wdt_device.queue && ticks)
+		mod_timer(&rdc321x_wdt_device.timer,
+				jiffies + RDC_WDT_INTERVAL);
+	else {
+		/* ticks doesn't matter anyway */
+		complete(&rdc321x_wdt_device.stop);
+	}
+
+}
+
+static void rdc321x_wdt_reset(void)
+{
+	ticks = rdc321x_wdt_device.default_ticks;
+}
+
+static void rdc321x_wdt_start(void)
+{
+	unsigned long flags;
+
+	if (!rdc321x_wdt_device.queue) {
+		rdc321x_wdt_device.queue = 1;
+
+		/* Clear the timer */
+		spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
+		pci_write_config_dword(rdc321x_wdt_device.sb_pdev,
+				rdc321x_wdt_device.base_reg, RDC_CLS_TMR);
+
+		/* Enable watchdog and set the timeout to 81.92 us */
+		pci_write_config_dword(rdc321x_wdt_device.sb_pdev,
+					rdc321x_wdt_device.base_reg,
+					RDC_WDT_EN | RDC_WDT_CNT);
+		spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
+
+		mod_timer(&rdc321x_wdt_device.timer,
+				jiffies + RDC_WDT_INTERVAL);
+	}
+
+	/* if process dies, counter is not decremented */
+	rdc321x_wdt_device.running++;
+}
+
+static int rdc321x_wdt_stop(void)
+{
+	if (rdc321x_wdt_device.running)
+		rdc321x_wdt_device.running = 0;
+
+	ticks = rdc321x_wdt_device.default_ticks;
+
+	return -EIO;
+}
+
+/* filesystem operations */
+static int rdc321x_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &rdc321x_wdt_device.inuse))
+		return -EBUSY;
+
+	return nonseekable_open(inode, file);
+}
+
+static int rdc321x_wdt_release(struct inode *inode, struct file *file)
+{
+	clear_bit(0, &rdc321x_wdt_device.inuse);
+	return 0;
+}
+
+static long rdc321x_wdt_ioctl(struct file *file, unsigned int cmd,
+				unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	u32 value;
+	static const struct watchdog_info ident = {
+		.options = WDIOF_CARDRESET,
+		.identity = "RDC321x WDT",
+	};
+	unsigned long flags;
+
+	switch (cmd) {
+	case WDIOC_KEEPALIVE:
+		rdc321x_wdt_reset();
+		break;
+	case WDIOC_GETSTATUS:
+		/* Read the value from the DATA register */
+		spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
+		pci_read_config_dword(rdc321x_wdt_device.sb_pdev,
+					rdc321x_wdt_device.base_reg, &value);
+		spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
+		if (copy_to_user(argp, &value, sizeof(u32)))
+			return -EFAULT;
+		break;
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+	case WDIOC_SETOPTIONS:
+		if (copy_from_user(&value, argp, sizeof(int)))
+			return -EFAULT;
+		switch (value) {
+		case WDIOS_ENABLECARD:
+			rdc321x_wdt_start();
+			break;
+		case WDIOS_DISABLECARD:
+			return rdc321x_wdt_stop();
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+static ssize_t rdc321x_wdt_write(struct file *file, const char __user *buf,
+				size_t count, loff_t *ppos)
+{
+	if (!count)
+		return -EIO;
+
+	rdc321x_wdt_reset();
+
+	return count;
+}
+
+static const struct file_operations rdc321x_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.unlocked_ioctl	= rdc321x_wdt_ioctl,
+	.open		= rdc321x_wdt_open,
+	.write		= rdc321x_wdt_write,
+	.release	= rdc321x_wdt_release,
+};
+
+static struct miscdevice rdc321x_wdt_misc = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &rdc321x_wdt_fops,
+};
+
+static int rdc321x_wdt_probe(struct platform_device *pdev)
+{
+	int err;
+	struct resource *r;
+	struct rdc321x_wdt_pdata *pdata;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data supplied\n");
+		return -ENODEV;
+	}
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_IO, "wdt-reg");
+	if (!r) {
+		dev_err(&pdev->dev, "failed to get wdt-reg resource\n");
+		return -ENODEV;
+	}
+
+	rdc321x_wdt_device.sb_pdev = pdata->sb_pdev;
+	rdc321x_wdt_device.base_reg = r->start;
+	rdc321x_wdt_device.queue = 0;
+	rdc321x_wdt_device.default_ticks = ticks;
+
+	err = misc_register(&rdc321x_wdt_misc);
+	if (err < 0) {
+		dev_err(&pdev->dev, "misc_register failed\n");
+		return err;
+	}
+
+	spin_lock_init(&rdc321x_wdt_device.lock);
+
+	/* Reset the watchdog */
+	pci_write_config_dword(rdc321x_wdt_device.sb_pdev,
+				rdc321x_wdt_device.base_reg, RDC_WDT_RST);
+
+	init_completion(&rdc321x_wdt_device.stop);
+
+	clear_bit(0, &rdc321x_wdt_device.inuse);
+
+	timer_setup(&rdc321x_wdt_device.timer, rdc321x_wdt_trigger, 0);
+
+	dev_info(&pdev->dev, "watchdog init success\n");
+
+	return 0;
+}
+
+static int rdc321x_wdt_remove(struct platform_device *pdev)
+{
+	if (rdc321x_wdt_device.queue) {
+		rdc321x_wdt_device.queue = 0;
+		wait_for_completion(&rdc321x_wdt_device.stop);
+	}
+
+	misc_deregister(&rdc321x_wdt_misc);
+
+	return 0;
+}
+
+static struct platform_driver rdc321x_wdt_driver = {
+	.probe = rdc321x_wdt_probe,
+	.remove = rdc321x_wdt_remove,
+	.driver = {
+		.name = "rdc321x-wdt",
+	},
+};
+
+module_platform_driver(rdc321x_wdt_driver);
+
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("RDC321x watchdog driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/renesas_wdt.c b/drivers/watchdog/renesas_wdt.c
new file mode 100644
index 000000000..62d9d3edc
--- /dev/null
+++ b/drivers/watchdog/renesas_wdt.c
@@ -0,0 +1,314 @@
+/*
+ * Watchdog driver for Renesas WDT watchdog
+ *
+ * Copyright (C) 2015-17 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ * Copyright (C) 2015-17 Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/smp.h>
+#include <linux/sys_soc.h>
+#include <linux/watchdog.h>
+
+#define RWTCNT		0
+#define RWTCSRA		4
+#define RWTCSRA_WOVF	BIT(4)
+#define RWTCSRA_WRFLG	BIT(5)
+#define RWTCSRA_TME	BIT(7)
+#define RWTCSRB		8
+
+#define RWDT_DEFAULT_TIMEOUT 60U
+
+/*
+ * In probe, clk_rate is checked to be not more than 16 bit * biggest clock
+ * divider (12 bits). d is only a factor to fully utilize the WDT counter and
+ * will not exceed its 16 bits. Thus, no overflow, we stay below 32 bits.
+ */
+#define MUL_BY_CLKS_PER_SEC(p, d) \
+	DIV_ROUND_UP((d) * (p)->clk_rate, clk_divs[(p)->cks])
+
+/* d is 16 bit, clk_divs 12 bit -> no 32 bit overflow */
+#define DIV_BY_CLKS_PER_SEC(p, d) ((d) * clk_divs[(p)->cks] / (p)->clk_rate)
+
+static const unsigned int clk_divs[] = { 1, 4, 16, 32, 64, 128, 1024, 4096 };
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct rwdt_priv {
+	void __iomem *base;
+	struct watchdog_device wdev;
+	unsigned long clk_rate;
+	u16 time_left;
+	u8 cks;
+};
+
+static void rwdt_write(struct rwdt_priv *priv, u32 val, unsigned int reg)
+{
+	if (reg == RWTCNT)
+		val |= 0x5a5a0000;
+	else
+		val |= 0xa5a5a500;
+
+	writel_relaxed(val, priv->base + reg);
+}
+
+static int rwdt_init_timeout(struct watchdog_device *wdev)
+{
+	struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
+
+	rwdt_write(priv, 65536 - MUL_BY_CLKS_PER_SEC(priv, wdev->timeout), RWTCNT);
+
+	return 0;
+}
+
+static int rwdt_start(struct watchdog_device *wdev)
+{
+	struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
+	u8 val;
+
+	pm_runtime_get_sync(wdev->parent);
+
+	/* Stop the timer before we modify any register */
+	val = readb_relaxed(priv->base + RWTCSRA) & ~RWTCSRA_TME;
+	rwdt_write(priv, val, RWTCSRA);
+
+	rwdt_init_timeout(wdev);
+	rwdt_write(priv, priv->cks, RWTCSRA);
+	rwdt_write(priv, 0, RWTCSRB);
+
+	while (readb_relaxed(priv->base + RWTCSRA) & RWTCSRA_WRFLG)
+		cpu_relax();
+
+	rwdt_write(priv, priv->cks | RWTCSRA_TME, RWTCSRA);
+
+	return 0;
+}
+
+static int rwdt_stop(struct watchdog_device *wdev)
+{
+	struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
+
+	rwdt_write(priv, priv->cks, RWTCSRA);
+	pm_runtime_put(wdev->parent);
+
+	return 0;
+}
+
+static unsigned int rwdt_get_timeleft(struct watchdog_device *wdev)
+{
+	struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
+	u16 val = readw_relaxed(priv->base + RWTCNT);
+
+	return DIV_BY_CLKS_PER_SEC(priv, 65536 - val);
+}
+
+static int rwdt_restart(struct watchdog_device *wdev, unsigned long action,
+			void *data)
+{
+	struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
+
+	rwdt_start(wdev);
+	rwdt_write(priv, 0xffff, RWTCNT);
+	return 0;
+}
+
+static const struct watchdog_info rwdt_ident = {
+	.options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+		WDIOF_CARDRESET,
+	.identity = "Renesas WDT Watchdog",
+};
+
+static const struct watchdog_ops rwdt_ops = {
+	.owner = THIS_MODULE,
+	.start = rwdt_start,
+	.stop = rwdt_stop,
+	.ping = rwdt_init_timeout,
+	.get_timeleft = rwdt_get_timeleft,
+	.restart = rwdt_restart,
+};
+
+#if defined(CONFIG_ARCH_RCAR_GEN2) && defined(CONFIG_SMP)
+/*
+ * Watchdog-reset integration is broken on early revisions of R-Car Gen2 SoCs
+ */
+static const struct soc_device_attribute rwdt_quirks_match[] = {
+	{
+		.soc_id = "r8a7790",
+		.revision = "ES1.*",
+		.data = (void *)1,	/* needs single CPU */
+	}, {
+		.soc_id = "r8a7791",
+		.revision = "ES1.*",
+		.data = (void *)1,	/* needs single CPU */
+	}, {
+		.soc_id = "r8a7792",
+		.revision = "*",
+		.data = (void *)0,	/* needs SMP disabled */
+	},
+	{ /* sentinel */ }
+};
+
+static bool rwdt_blacklisted(struct device *dev)
+{
+	const struct soc_device_attribute *attr;
+
+	attr = soc_device_match(rwdt_quirks_match);
+	if (attr && setup_max_cpus > (uintptr_t)attr->data) {
+		dev_info(dev, "Watchdog blacklisted on %s %s\n", attr->soc_id,
+			 attr->revision);
+		return true;
+	}
+
+	return false;
+}
+#else /* !CONFIG_ARCH_RCAR_GEN2 || !CONFIG_SMP */
+static inline bool rwdt_blacklisted(struct device *dev) { return false; }
+#endif /* !CONFIG_ARCH_RCAR_GEN2 || !CONFIG_SMP */
+
+static int rwdt_probe(struct platform_device *pdev)
+{
+	struct rwdt_priv *priv;
+	struct resource *res;
+	struct clk *clk;
+	unsigned long clks_per_sec;
+	int ret, i;
+
+	if (rwdt_blacklisted(&pdev->dev))
+		return -ENODEV;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+	priv->clk_rate = clk_get_rate(clk);
+	priv->wdev.bootstatus = (readb_relaxed(priv->base + RWTCSRA) &
+				RWTCSRA_WOVF) ? WDIOF_CARDRESET : 0;
+	pm_runtime_put(&pdev->dev);
+
+	if (!priv->clk_rate) {
+		ret = -ENOENT;
+		goto out_pm_disable;
+	}
+
+	for (i = ARRAY_SIZE(clk_divs) - 1; i >= 0; i--) {
+		clks_per_sec = priv->clk_rate / clk_divs[i];
+		if (clks_per_sec && clks_per_sec < 65536) {
+			priv->cks = i;
+			break;
+		}
+	}
+
+	if (i < 0) {
+		dev_err(&pdev->dev, "Can't find suitable clock divider\n");
+		ret = -ERANGE;
+		goto out_pm_disable;
+	}
+
+	priv->wdev.info = &rwdt_ident,
+	priv->wdev.ops = &rwdt_ops,
+	priv->wdev.parent = &pdev->dev;
+	priv->wdev.min_timeout = 1;
+	priv->wdev.max_timeout = DIV_BY_CLKS_PER_SEC(priv, 65536);
+	priv->wdev.timeout = min(priv->wdev.max_timeout, RWDT_DEFAULT_TIMEOUT);
+
+	platform_set_drvdata(pdev, priv);
+	watchdog_set_drvdata(&priv->wdev, priv);
+	watchdog_set_nowayout(&priv->wdev, nowayout);
+	watchdog_set_restart_priority(&priv->wdev, 0);
+	watchdog_stop_on_unregister(&priv->wdev);
+
+	/* This overrides the default timeout only if DT configuration was found */
+	ret = watchdog_init_timeout(&priv->wdev, 0, &pdev->dev);
+	if (ret)
+		dev_warn(&pdev->dev, "Specified timeout value invalid, using default\n");
+
+	ret = watchdog_register_device(&priv->wdev);
+	if (ret < 0)
+		goto out_pm_disable;
+
+	return 0;
+
+ out_pm_disable:
+	pm_runtime_disable(&pdev->dev);
+	return ret;
+}
+
+static int rwdt_remove(struct platform_device *pdev)
+{
+	struct rwdt_priv *priv = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&priv->wdev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static int __maybe_unused rwdt_suspend(struct device *dev)
+{
+	struct rwdt_priv *priv = dev_get_drvdata(dev);
+
+	if (watchdog_active(&priv->wdev)) {
+		priv->time_left = readw(priv->base + RWTCNT);
+		rwdt_stop(&priv->wdev);
+	}
+	return 0;
+}
+
+static int __maybe_unused rwdt_resume(struct device *dev)
+{
+	struct rwdt_priv *priv = dev_get_drvdata(dev);
+
+	if (watchdog_active(&priv->wdev)) {
+		rwdt_start(&priv->wdev);
+		rwdt_write(priv, priv->time_left, RWTCNT);
+	}
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(rwdt_pm_ops, rwdt_suspend, rwdt_resume);
+
+static const struct of_device_id rwdt_ids[] = {
+	{ .compatible = "renesas,rcar-gen2-wdt", },
+	{ .compatible = "renesas,rcar-gen3-wdt", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rwdt_ids);
+
+static struct platform_driver rwdt_driver = {
+	.driver = {
+		.name = "renesas_wdt",
+		.of_match_table = rwdt_ids,
+		.pm = &rwdt_pm_ops,
+	},
+	.probe = rwdt_probe,
+	.remove = rwdt_remove,
+};
+module_platform_driver(rwdt_driver);
+
+MODULE_DESCRIPTION("Renesas WDT Watchdog Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>");
diff --git a/drivers/watchdog/retu_wdt.c b/drivers/watchdog/retu_wdt.c
new file mode 100644
index 000000000..39cd51df2
--- /dev/null
+++ b/drivers/watchdog/retu_wdt.c
@@ -0,0 +1,178 @@
+/*
+ * Retu watchdog driver
+ *
+ * Copyright (C) 2004, 2005 Nokia Corporation
+ *
+ * Based on code written by Amit Kucheria and Michael Buesch.
+ * Rewritten by Aaro Koskinen.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/retu.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+
+/* Watchdog timer values in seconds */
+#define RETU_WDT_MAX_TIMER	63
+
+struct retu_wdt_dev {
+	struct retu_dev		*rdev;
+	struct device		*dev;
+	struct delayed_work	ping_work;
+};
+
+/*
+ * Since Retu watchdog cannot be disabled in hardware, we must kick it
+ * with a timer until userspace watchdog software takes over. If
+ * CONFIG_WATCHDOG_NOWAYOUT is set, we never start the feeding.
+ */
+static void retu_wdt_ping_enable(struct retu_wdt_dev *wdev)
+{
+	retu_write(wdev->rdev, RETU_REG_WATCHDOG, RETU_WDT_MAX_TIMER);
+	schedule_delayed_work(&wdev->ping_work,
+			round_jiffies_relative(RETU_WDT_MAX_TIMER * HZ / 2));
+}
+
+static void retu_wdt_ping_disable(struct retu_wdt_dev *wdev)
+{
+	retu_write(wdev->rdev, RETU_REG_WATCHDOG, RETU_WDT_MAX_TIMER);
+	cancel_delayed_work_sync(&wdev->ping_work);
+}
+
+static void retu_wdt_ping_work(struct work_struct *work)
+{
+	struct retu_wdt_dev *wdev = container_of(to_delayed_work(work),
+						struct retu_wdt_dev, ping_work);
+	retu_wdt_ping_enable(wdev);
+}
+
+static int retu_wdt_start(struct watchdog_device *wdog)
+{
+	struct retu_wdt_dev *wdev = watchdog_get_drvdata(wdog);
+
+	retu_wdt_ping_disable(wdev);
+
+	return retu_write(wdev->rdev, RETU_REG_WATCHDOG, wdog->timeout);
+}
+
+static int retu_wdt_stop(struct watchdog_device *wdog)
+{
+	struct retu_wdt_dev *wdev = watchdog_get_drvdata(wdog);
+
+	retu_wdt_ping_enable(wdev);
+
+	return 0;
+}
+
+static int retu_wdt_ping(struct watchdog_device *wdog)
+{
+	struct retu_wdt_dev *wdev = watchdog_get_drvdata(wdog);
+
+	return retu_write(wdev->rdev, RETU_REG_WATCHDOG, wdog->timeout);
+}
+
+static int retu_wdt_set_timeout(struct watchdog_device *wdog,
+				unsigned int timeout)
+{
+	struct retu_wdt_dev *wdev = watchdog_get_drvdata(wdog);
+
+	wdog->timeout = timeout;
+	return retu_write(wdev->rdev, RETU_REG_WATCHDOG, wdog->timeout);
+}
+
+static const struct watchdog_info retu_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+	.identity = "Retu watchdog",
+};
+
+static const struct watchdog_ops retu_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= retu_wdt_start,
+	.stop		= retu_wdt_stop,
+	.ping		= retu_wdt_ping,
+	.set_timeout	= retu_wdt_set_timeout,
+};
+
+static int retu_wdt_probe(struct platform_device *pdev)
+{
+	struct retu_dev *rdev = dev_get_drvdata(pdev->dev.parent);
+	bool nowayout = WATCHDOG_NOWAYOUT;
+	struct watchdog_device *retu_wdt;
+	struct retu_wdt_dev *wdev;
+	int ret;
+
+	retu_wdt = devm_kzalloc(&pdev->dev, sizeof(*retu_wdt), GFP_KERNEL);
+	if (!retu_wdt)
+		return -ENOMEM;
+
+	wdev = devm_kzalloc(&pdev->dev, sizeof(*wdev), GFP_KERNEL);
+	if (!wdev)
+		return -ENOMEM;
+
+	retu_wdt->info		= &retu_wdt_info;
+	retu_wdt->ops		= &retu_wdt_ops;
+	retu_wdt->timeout	= RETU_WDT_MAX_TIMER;
+	retu_wdt->min_timeout	= 0;
+	retu_wdt->max_timeout	= RETU_WDT_MAX_TIMER;
+	retu_wdt->parent	= &pdev->dev;
+
+	watchdog_set_drvdata(retu_wdt, wdev);
+	watchdog_set_nowayout(retu_wdt, nowayout);
+
+	wdev->rdev		= rdev;
+	wdev->dev		= &pdev->dev;
+
+	INIT_DELAYED_WORK(&wdev->ping_work, retu_wdt_ping_work);
+
+	ret = watchdog_register_device(retu_wdt);
+	if (ret < 0)
+		return ret;
+
+	if (nowayout)
+		retu_wdt_ping(retu_wdt);
+	else
+		retu_wdt_ping_enable(wdev);
+
+	platform_set_drvdata(pdev, retu_wdt);
+
+	return 0;
+}
+
+static int retu_wdt_remove(struct platform_device *pdev)
+{
+	struct watchdog_device *wdog = platform_get_drvdata(pdev);
+	struct retu_wdt_dev *wdev = watchdog_get_drvdata(wdog);
+
+	watchdog_unregister_device(wdog);
+	cancel_delayed_work_sync(&wdev->ping_work);
+
+	return 0;
+}
+
+static struct platform_driver retu_wdt_driver = {
+	.probe		= retu_wdt_probe,
+	.remove		= retu_wdt_remove,
+	.driver		= {
+		.name	= "retu-wdt",
+	},
+};
+module_platform_driver(retu_wdt_driver);
+
+MODULE_ALIAS("platform:retu-wdt");
+MODULE_DESCRIPTION("Retu watchdog");
+MODULE_AUTHOR("Amit Kucheria");
+MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/riowd.c b/drivers/watchdog/riowd.c
new file mode 100644
index 000000000..aba534246
--- /dev/null
+++ b/drivers/watchdog/riowd.c
@@ -0,0 +1,246 @@
+/* riowd.c - driver for hw watchdog inside Super I/O of RIO
+ *
+ * Copyright (C) 2001, 2008 David S. Miller (davem@davemloft.net)
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+
+
+/* RIO uses the NatSemi Super I/O power management logical device
+ * as its' watchdog.
+ *
+ * When the watchdog triggers, it asserts a line to the BBC (Boot Bus
+ * Controller) of the machine.  The BBC can only be configured to
+ * trigger a power-on reset when the signal is asserted.  The BBC
+ * can be configured to ignore the signal entirely as well.
+ *
+ * The only Super I/O device register we care about is at index
+ * 0x05 (WDTO_INDEX) which is the watchdog time-out in minutes (1-255).
+ * If set to zero, this disables the watchdog.  When set, the system
+ * must periodically (before watchdog expires) clear (set to zero) and
+ * re-set the watchdog else it will trigger.
+ *
+ * There are two other indexed watchdog registers inside this Super I/O
+ * logical device, but they are unused.  The first, at index 0x06 is
+ * the watchdog control and can be used to make the watchdog timer re-set
+ * when the PS/2 mouse or serial lines show activity.  The second, at
+ * index 0x07 is merely a sampling of the line from the watchdog to the
+ * BBC.
+ *
+ * The watchdog device generates no interrupts.
+ */
+
+MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
+MODULE_DESCRIPTION("Hardware watchdog driver for Sun RIO");
+MODULE_SUPPORTED_DEVICE("watchdog");
+MODULE_LICENSE("GPL");
+
+#define DRIVER_NAME	"riowd"
+#define PFX		DRIVER_NAME ": "
+
+struct riowd {
+	void __iomem		*regs;
+	spinlock_t		lock;
+};
+
+static struct riowd *riowd_device;
+
+#define WDTO_INDEX	0x05
+
+static int riowd_timeout = 1;		/* in minutes */
+module_param(riowd_timeout, int, 0);
+MODULE_PARM_DESC(riowd_timeout, "Watchdog timeout in minutes");
+
+static void riowd_writereg(struct riowd *p, u8 val, int index)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&p->lock, flags);
+	writeb(index, p->regs + 0);
+	writeb(val, p->regs + 1);
+	spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static int riowd_open(struct inode *inode, struct file *filp)
+{
+	nonseekable_open(inode, filp);
+	return 0;
+}
+
+static int riowd_release(struct inode *inode, struct file *filp)
+{
+	return 0;
+}
+
+static long riowd_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	static const struct watchdog_info info = {
+		.options		= WDIOF_SETTIMEOUT,
+		.firmware_version	= 1,
+		.identity		= DRIVER_NAME,
+	};
+	void __user *argp = (void __user *)arg;
+	struct riowd *p = riowd_device;
+	unsigned int options;
+	int new_margin;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &info, sizeof(info)))
+			return -EFAULT;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		if (put_user(0, (int __user *)argp))
+			return -EFAULT;
+		break;
+
+	case WDIOC_KEEPALIVE:
+		riowd_writereg(p, riowd_timeout, WDTO_INDEX);
+		break;
+
+	case WDIOC_SETOPTIONS:
+		if (copy_from_user(&options, argp, sizeof(options)))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD)
+			riowd_writereg(p, 0, WDTO_INDEX);
+		else if (options & WDIOS_ENABLECARD)
+			riowd_writereg(p, riowd_timeout, WDTO_INDEX);
+		else
+			return -EINVAL;
+
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_margin, (int __user *)argp))
+			return -EFAULT;
+		if ((new_margin < 60) || (new_margin > (255 * 60)))
+			return -EINVAL;
+		riowd_timeout = (new_margin + 59) / 60;
+		riowd_writereg(p, riowd_timeout, WDTO_INDEX);
+		/* Fall */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(riowd_timeout * 60, (int __user *)argp);
+
+	default:
+		return -EINVAL;
+	};
+
+	return 0;
+}
+
+static ssize_t riowd_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
+{
+	struct riowd *p = riowd_device;
+
+	if (count) {
+		riowd_writereg(p, riowd_timeout, WDTO_INDEX);
+		return 1;
+	}
+
+	return 0;
+}
+
+static const struct file_operations riowd_fops = {
+	.owner =		THIS_MODULE,
+	.llseek =		no_llseek,
+	.unlocked_ioctl =	riowd_ioctl,
+	.open =			riowd_open,
+	.write =		riowd_write,
+	.release =		riowd_release,
+};
+
+static struct miscdevice riowd_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &riowd_fops
+};
+
+static int riowd_probe(struct platform_device *op)
+{
+	struct riowd *p;
+	int err = -EINVAL;
+
+	if (riowd_device)
+		goto out;
+
+	err = -ENOMEM;
+	p = devm_kzalloc(&op->dev, sizeof(*p), GFP_KERNEL);
+	if (!p)
+		goto out;
+
+	spin_lock_init(&p->lock);
+
+	p->regs = of_ioremap(&op->resource[0], 0, 2, DRIVER_NAME);
+	if (!p->regs) {
+		pr_err("Cannot map registers\n");
+		goto out;
+	}
+	/* Make miscdev useable right away */
+	riowd_device = p;
+
+	err = misc_register(&riowd_miscdev);
+	if (err) {
+		pr_err("Cannot register watchdog misc device\n");
+		goto out_iounmap;
+	}
+
+	pr_info("Hardware watchdog [%i minutes], regs at %p\n",
+		riowd_timeout, p->regs);
+
+	platform_set_drvdata(op, p);
+	return 0;
+
+out_iounmap:
+	riowd_device = NULL;
+	of_iounmap(&op->resource[0], p->regs, 2);
+
+out:
+	return err;
+}
+
+static int riowd_remove(struct platform_device *op)
+{
+	struct riowd *p = platform_get_drvdata(op);
+
+	misc_deregister(&riowd_miscdev);
+	of_iounmap(&op->resource[0], p->regs, 2);
+
+	return 0;
+}
+
+static const struct of_device_id riowd_match[] = {
+	{
+		.name = "pmc",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, riowd_match);
+
+static struct platform_driver riowd_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = riowd_match,
+	},
+	.probe		= riowd_probe,
+	.remove		= riowd_remove,
+};
+
+module_platform_driver(riowd_driver);
diff --git a/drivers/watchdog/rn5t618_wdt.c b/drivers/watchdog/rn5t618_wdt.c
new file mode 100644
index 000000000..d2e79cf70
--- /dev/null
+++ b/drivers/watchdog/rn5t618_wdt.c
@@ -0,0 +1,199 @@
+/*
+ * Watchdog driver for Ricoh RN5T618 PMIC
+ *
+ * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/mfd/rn5t618.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define DRIVER_NAME "rn5t618-wdt"
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static unsigned int timeout;
+
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout, "Initial watchdog timeout in seconds");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct rn5t618_wdt {
+	struct watchdog_device wdt_dev;
+	struct rn5t618 *rn5t618;
+};
+
+/*
+ * This array encodes the values of WDOGTIM field for the supported
+ * watchdog expiration times. If the watchdog is not accessed before
+ * the timer expiration, the PMU generates an interrupt and if the CPU
+ * doesn't clear it within one second the system is restarted.
+ */
+static const struct {
+	u8 reg_val;
+	unsigned int time;
+} rn5t618_wdt_map[] = {
+	{ 0, 1 },
+	{ 1, 8 },
+	{ 2, 32 },
+	{ 3, 128 },
+};
+
+static int rn5t618_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				   unsigned int t)
+{
+	struct rn5t618_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+	int ret, i;
+
+	for (i = 0; i < ARRAY_SIZE(rn5t618_wdt_map); i++) {
+		if (rn5t618_wdt_map[i].time + 1 >= t)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(rn5t618_wdt_map))
+		return -EINVAL;
+
+	ret = regmap_update_bits(wdt->rn5t618->regmap, RN5T618_WATCHDOG,
+				 RN5T618_WATCHDOG_WDOGTIM_M,
+				 rn5t618_wdt_map[i].reg_val);
+	if (!ret)
+		wdt_dev->timeout = rn5t618_wdt_map[i].time;
+
+	return ret;
+}
+
+static int rn5t618_wdt_start(struct watchdog_device *wdt_dev)
+{
+	struct rn5t618_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+	int ret;
+
+	ret = rn5t618_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
+	if (ret)
+		return ret;
+
+	/* enable repower-on */
+	ret = regmap_update_bits(wdt->rn5t618->regmap, RN5T618_REPCNT,
+				 RN5T618_REPCNT_REPWRON,
+				 RN5T618_REPCNT_REPWRON);
+	if (ret)
+		return ret;
+
+	/* enable watchdog */
+	ret = regmap_update_bits(wdt->rn5t618->regmap, RN5T618_WATCHDOG,
+				 RN5T618_WATCHDOG_WDOGEN,
+				 RN5T618_WATCHDOG_WDOGEN);
+	if (ret)
+		return ret;
+
+	/* enable watchdog interrupt */
+	return regmap_update_bits(wdt->rn5t618->regmap, RN5T618_PWRIREN,
+				  RN5T618_PWRIRQ_IR_WDOG,
+				  RN5T618_PWRIRQ_IR_WDOG);
+}
+
+static int rn5t618_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct rn5t618_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+
+	return regmap_update_bits(wdt->rn5t618->regmap, RN5T618_WATCHDOG,
+				  RN5T618_WATCHDOG_WDOGEN, 0);
+}
+
+static int rn5t618_wdt_ping(struct watchdog_device *wdt_dev)
+{
+	struct rn5t618_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+	unsigned int val;
+	int ret;
+
+	/* The counter is restarted after a R/W access to watchdog register */
+	ret = regmap_read(wdt->rn5t618->regmap, RN5T618_WATCHDOG, &val);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(wdt->rn5t618->regmap, RN5T618_WATCHDOG, val);
+	if (ret)
+		return ret;
+
+	/* Clear pending watchdog interrupt */
+	return regmap_update_bits(wdt->rn5t618->regmap, RN5T618_PWRIRQ,
+				  RN5T618_PWRIRQ_IR_WDOG, 0);
+}
+
+static const struct watchdog_info rn5t618_wdt_info = {
+	.options	= WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
+			  WDIOF_KEEPALIVEPING,
+	.identity	= DRIVER_NAME,
+};
+
+static const struct watchdog_ops rn5t618_wdt_ops = {
+	.owner          = THIS_MODULE,
+	.start          = rn5t618_wdt_start,
+	.stop           = rn5t618_wdt_stop,
+	.ping           = rn5t618_wdt_ping,
+	.set_timeout    = rn5t618_wdt_set_timeout,
+};
+
+static int rn5t618_wdt_probe(struct platform_device *pdev)
+{
+	struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
+	struct rn5t618_wdt *wdt;
+	int min_timeout, max_timeout;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(struct rn5t618_wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	min_timeout = rn5t618_wdt_map[0].time;
+	max_timeout = rn5t618_wdt_map[ARRAY_SIZE(rn5t618_wdt_map) - 1].time;
+
+	wdt->rn5t618 = rn5t618;
+	wdt->wdt_dev.info = &rn5t618_wdt_info;
+	wdt->wdt_dev.ops = &rn5t618_wdt_ops;
+	wdt->wdt_dev.min_timeout = min_timeout;
+	wdt->wdt_dev.max_timeout = max_timeout;
+	wdt->wdt_dev.timeout = max_timeout;
+	wdt->wdt_dev.parent = &pdev->dev;
+
+	watchdog_set_drvdata(&wdt->wdt_dev, wdt);
+	watchdog_init_timeout(&wdt->wdt_dev, timeout, &pdev->dev);
+	watchdog_set_nowayout(&wdt->wdt_dev, nowayout);
+
+	platform_set_drvdata(pdev, wdt);
+
+	return watchdog_register_device(&wdt->wdt_dev);
+}
+
+static int rn5t618_wdt_remove(struct platform_device *pdev)
+{
+	struct rn5t618_wdt *wdt = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&wdt->wdt_dev);
+
+	return 0;
+}
+
+static struct platform_driver rn5t618_wdt_driver = {
+	.probe = rn5t618_wdt_probe,
+	.remove = rn5t618_wdt_remove,
+	.driver = {
+		.name	= DRIVER_NAME,
+	},
+};
+
+module_platform_driver(rn5t618_wdt_driver);
+
+MODULE_ALIAS("platform:rn5t618-wdt");
+MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
+MODULE_DESCRIPTION("RN5T618 watchdog driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/watchdog/rt2880_wdt.c b/drivers/watchdog/rt2880_wdt.c
new file mode 100644
index 000000000..db7c57d82
--- /dev/null
+++ b/drivers/watchdog/rt2880_wdt.c
@@ -0,0 +1,209 @@
+/*
+ * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 John Crispin <john@phrozen.org>
+ *
+ * This driver was based on: drivers/watchdog/softdog.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/watchdog.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define SYSC_RSTSTAT			0x38
+#define WDT_RST_CAUSE			BIT(1)
+
+#define RALINK_WDT_TIMEOUT		30
+#define RALINK_WDT_PRESCALE		65536
+
+#define TIMER_REG_TMR1LOAD		0x00
+#define TIMER_REG_TMR1CTL		0x08
+
+#define TMRSTAT_TMR1RST			BIT(5)
+
+#define TMR1CTL_ENABLE			BIT(7)
+#define TMR1CTL_MODE_SHIFT		4
+#define TMR1CTL_MODE_MASK		0x3
+#define TMR1CTL_MODE_FREE_RUNNING	0x0
+#define TMR1CTL_MODE_PERIODIC		0x1
+#define TMR1CTL_MODE_TIMEOUT		0x2
+#define TMR1CTL_MODE_WDT		0x3
+#define TMR1CTL_PRESCALE_MASK		0xf
+#define TMR1CTL_PRESCALE_65536		0xf
+
+static struct clk *rt288x_wdt_clk;
+static unsigned long rt288x_wdt_freq;
+static void __iomem *rt288x_wdt_base;
+static struct reset_control *rt288x_wdt_reset;
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static inline void rt_wdt_w32(unsigned reg, u32 val)
+{
+	iowrite32(val, rt288x_wdt_base + reg);
+}
+
+static inline u32 rt_wdt_r32(unsigned reg)
+{
+	return ioread32(rt288x_wdt_base + reg);
+}
+
+static int rt288x_wdt_ping(struct watchdog_device *w)
+{
+	rt_wdt_w32(TIMER_REG_TMR1LOAD, w->timeout * rt288x_wdt_freq);
+
+	return 0;
+}
+
+static int rt288x_wdt_start(struct watchdog_device *w)
+{
+	u32 t;
+
+	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
+	t &= ~(TMR1CTL_MODE_MASK << TMR1CTL_MODE_SHIFT |
+		TMR1CTL_PRESCALE_MASK);
+	t |= (TMR1CTL_MODE_WDT << TMR1CTL_MODE_SHIFT |
+		TMR1CTL_PRESCALE_65536);
+	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
+
+	rt288x_wdt_ping(w);
+
+	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
+	t |= TMR1CTL_ENABLE;
+	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
+
+	return 0;
+}
+
+static int rt288x_wdt_stop(struct watchdog_device *w)
+{
+	u32 t;
+
+	rt288x_wdt_ping(w);
+
+	t = rt_wdt_r32(TIMER_REG_TMR1CTL);
+	t &= ~TMR1CTL_ENABLE;
+	rt_wdt_w32(TIMER_REG_TMR1CTL, t);
+
+	return 0;
+}
+
+static int rt288x_wdt_set_timeout(struct watchdog_device *w, unsigned int t)
+{
+	w->timeout = t;
+	rt288x_wdt_ping(w);
+
+	return 0;
+}
+
+static int rt288x_wdt_bootcause(void)
+{
+	if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE)
+		return WDIOF_CARDRESET;
+
+	return 0;
+}
+
+static const struct watchdog_info rt288x_wdt_info = {
+	.identity = "Ralink Watchdog",
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops rt288x_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = rt288x_wdt_start,
+	.stop = rt288x_wdt_stop,
+	.ping = rt288x_wdt_ping,
+	.set_timeout = rt288x_wdt_set_timeout,
+};
+
+static struct watchdog_device rt288x_wdt_dev = {
+	.info = &rt288x_wdt_info,
+	.ops = &rt288x_wdt_ops,
+	.min_timeout = 1,
+};
+
+static int rt288x_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rt288x_wdt_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rt288x_wdt_base))
+		return PTR_ERR(rt288x_wdt_base);
+
+	rt288x_wdt_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(rt288x_wdt_clk))
+		return PTR_ERR(rt288x_wdt_clk);
+
+	rt288x_wdt_reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (!IS_ERR(rt288x_wdt_reset))
+		reset_control_deassert(rt288x_wdt_reset);
+
+	rt288x_wdt_freq = clk_get_rate(rt288x_wdt_clk) / RALINK_WDT_PRESCALE;
+
+	rt288x_wdt_dev.bootstatus = rt288x_wdt_bootcause();
+	rt288x_wdt_dev.max_timeout = (0xfffful / rt288x_wdt_freq);
+	rt288x_wdt_dev.parent = &pdev->dev;
+
+	watchdog_init_timeout(&rt288x_wdt_dev, rt288x_wdt_dev.max_timeout,
+			      &pdev->dev);
+	watchdog_set_nowayout(&rt288x_wdt_dev, nowayout);
+
+	ret = watchdog_register_device(&rt288x_wdt_dev);
+	if (!ret)
+		dev_info(&pdev->dev, "Initialized\n");
+
+	return 0;
+}
+
+static int rt288x_wdt_remove(struct platform_device *pdev)
+{
+	watchdog_unregister_device(&rt288x_wdt_dev);
+
+	return 0;
+}
+
+static void rt288x_wdt_shutdown(struct platform_device *pdev)
+{
+	rt288x_wdt_stop(&rt288x_wdt_dev);
+}
+
+static const struct of_device_id rt288x_wdt_match[] = {
+	{ .compatible = "ralink,rt2880-wdt" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rt288x_wdt_match);
+
+static struct platform_driver rt288x_wdt_driver = {
+	.probe		= rt288x_wdt_probe,
+	.remove		= rt288x_wdt_remove,
+	.shutdown	= rt288x_wdt_shutdown,
+	.driver		= {
+		.name		= KBUILD_MODNAME,
+		.of_match_table	= rt288x_wdt_match,
+	},
+};
+
+module_platform_driver(rt288x_wdt_driver);
+
+MODULE_DESCRIPTION("MediaTek/Ralink RT288x/RT3xxx hardware watchdog driver");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/watchdog/rtd119x_wdt.c b/drivers/watchdog/rtd119x_wdt.c
new file mode 100644
index 000000000..99caec688
--- /dev/null
+++ b/drivers/watchdog/rtd119x_wdt.c
@@ -0,0 +1,168 @@
+/*
+ * Realtek RTD129x watchdog
+ *
+ * Copyright (c) 2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define RTD119X_TCWCR		0x0
+#define RTD119X_TCWTR		0x4
+#define RTD119X_TCWOV		0xc
+
+#define RTD119X_TCWCR_WDEN_DISABLED		0xa5
+#define RTD119X_TCWCR_WDEN_ENABLED		0xff
+#define RTD119X_TCWCR_WDEN_MASK			0xff
+
+#define RTD119X_TCWTR_WDCLR			BIT(0)
+
+struct rtd119x_watchdog_device {
+	struct watchdog_device wdt_dev;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static int rtd119x_wdt_start(struct watchdog_device *wdev)
+{
+	struct rtd119x_watchdog_device *data = watchdog_get_drvdata(wdev);
+	u32 val;
+
+	val = readl_relaxed(data->base + RTD119X_TCWCR);
+	val &= ~RTD119X_TCWCR_WDEN_MASK;
+	val |= RTD119X_TCWCR_WDEN_ENABLED;
+	writel(val, data->base + RTD119X_TCWCR);
+
+	return 0;
+}
+
+static int rtd119x_wdt_stop(struct watchdog_device *wdev)
+{
+	struct rtd119x_watchdog_device *data = watchdog_get_drvdata(wdev);
+	u32 val;
+
+	val = readl_relaxed(data->base + RTD119X_TCWCR);
+	val &= ~RTD119X_TCWCR_WDEN_MASK;
+	val |= RTD119X_TCWCR_WDEN_DISABLED;
+	writel(val, data->base + RTD119X_TCWCR);
+
+	return 0;
+}
+
+static int rtd119x_wdt_ping(struct watchdog_device *wdev)
+{
+	struct rtd119x_watchdog_device *data = watchdog_get_drvdata(wdev);
+
+	writel_relaxed(RTD119X_TCWTR_WDCLR, data->base + RTD119X_TCWTR);
+
+	return rtd119x_wdt_start(wdev);
+}
+
+static int rtd119x_wdt_set_timeout(struct watchdog_device *wdev, unsigned int val)
+{
+	struct rtd119x_watchdog_device *data = watchdog_get_drvdata(wdev);
+
+	writel(val * clk_get_rate(data->clk), data->base + RTD119X_TCWOV);
+
+	data->wdt_dev.timeout = val;
+
+	return 0;
+}
+
+static const struct watchdog_ops rtd119x_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start		= rtd119x_wdt_start,
+	.stop		= rtd119x_wdt_stop,
+	.ping		= rtd119x_wdt_ping,
+	.set_timeout	= rtd119x_wdt_set_timeout,
+};
+
+static const struct watchdog_info rtd119x_wdt_info = {
+	.identity = "rtd119x-wdt",
+	.options = 0,
+};
+
+static const struct of_device_id rtd119x_wdt_dt_ids[] = {
+	 { .compatible = "realtek,rtd1295-watchdog" },
+	 { }
+};
+
+static int rtd119x_wdt_probe(struct platform_device *pdev)
+{
+	struct rtd119x_watchdog_device *data;
+	struct resource *res;
+	int ret;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->base))
+		return PTR_ERR(data->base);
+
+	data->clk = of_clk_get(pdev->dev.of_node, 0);
+	if (IS_ERR(data->clk))
+		return PTR_ERR(data->clk);
+
+	ret = clk_prepare_enable(data->clk);
+	if (ret) {
+		clk_put(data->clk);
+		return ret;
+	}
+
+	data->wdt_dev.info = &rtd119x_wdt_info;
+	data->wdt_dev.ops = &rtd119x_wdt_ops;
+	data->wdt_dev.timeout = 120;
+	data->wdt_dev.max_timeout = 0xffffffff / clk_get_rate(data->clk);
+	data->wdt_dev.min_timeout = 1;
+	data->wdt_dev.parent = &pdev->dev;
+
+	watchdog_stop_on_reboot(&data->wdt_dev);
+	watchdog_set_drvdata(&data->wdt_dev, data);
+	platform_set_drvdata(pdev, data);
+
+	writel_relaxed(RTD119X_TCWTR_WDCLR, data->base + RTD119X_TCWTR);
+	rtd119x_wdt_set_timeout(&data->wdt_dev, data->wdt_dev.timeout);
+	rtd119x_wdt_stop(&data->wdt_dev);
+
+	ret = watchdog_register_device(&data->wdt_dev);
+	if (ret) {
+		clk_disable_unprepare(data->clk);
+		clk_put(data->clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rtd119x_wdt_remove(struct platform_device *pdev)
+{
+	struct rtd119x_watchdog_device *data = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&data->wdt_dev);
+
+	clk_disable_unprepare(data->clk);
+	clk_put(data->clk);
+
+	return 0;
+}
+
+static struct platform_driver rtd119x_wdt_driver = {
+	.probe = rtd119x_wdt_probe,
+	.remove = rtd119x_wdt_remove,
+	.driver = {
+		.name = "rtd1295-watchdog",
+		.of_match_table	= rtd119x_wdt_dt_ids,
+	},
+};
+builtin_platform_driver(rtd119x_wdt_driver);
diff --git a/drivers/watchdog/rza_wdt.c b/drivers/watchdog/rza_wdt.c
new file mode 100644
index 000000000..e618218d2
--- /dev/null
+++ b/drivers/watchdog/rza_wdt.c
@@ -0,0 +1,199 @@
+/*
+ * Renesas RZ/A Series WDT Driver
+ *
+ * Copyright (C) 2017 Renesas Electronics America, Inc.
+ * Copyright (C) 2017 Chris Brandt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define DEFAULT_TIMEOUT		30
+
+/* Watchdog Timer Registers */
+#define WTCSR			0
+#define WTCSR_MAGIC		0xA500
+#define WTSCR_WT		BIT(6)
+#define WTSCR_TME		BIT(5)
+#define WTSCR_CKS(i)		(i)
+
+#define WTCNT			2
+#define WTCNT_MAGIC		0x5A00
+
+#define WRCSR			4
+#define WRCSR_MAGIC		0x5A00
+#define WRCSR_RSTE		BIT(6)
+#define WRCSR_CLEAR_WOVF	0xA500	/* special value */
+
+struct rza_wdt {
+	struct watchdog_device wdev;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static int rza_wdt_start(struct watchdog_device *wdev)
+{
+	struct rza_wdt *priv = watchdog_get_drvdata(wdev);
+
+	/* Stop timer */
+	writew(WTCSR_MAGIC | 0, priv->base + WTCSR);
+
+	/* Must dummy read WRCSR:WOVF at least once before clearing */
+	readb(priv->base + WRCSR);
+	writew(WRCSR_CLEAR_WOVF, priv->base + WRCSR);
+
+	/*
+	 * Start timer with slowest clock source and reset option enabled.
+	 */
+	writew(WRCSR_MAGIC | WRCSR_RSTE, priv->base + WRCSR);
+	writew(WTCNT_MAGIC | 0, priv->base + WTCNT);
+	writew(WTCSR_MAGIC | WTSCR_WT | WTSCR_TME | WTSCR_CKS(7),
+	       priv->base + WTCSR);
+
+	return 0;
+}
+
+static int rza_wdt_stop(struct watchdog_device *wdev)
+{
+	struct rza_wdt *priv = watchdog_get_drvdata(wdev);
+
+	writew(WTCSR_MAGIC | 0, priv->base + WTCSR);
+
+	return 0;
+}
+
+static int rza_wdt_ping(struct watchdog_device *wdev)
+{
+	struct rza_wdt *priv = watchdog_get_drvdata(wdev);
+
+	writew(WTCNT_MAGIC | 0, priv->base + WTCNT);
+
+	return 0;
+}
+
+static int rza_wdt_restart(struct watchdog_device *wdev, unsigned long action,
+			    void *data)
+{
+	struct rza_wdt *priv = watchdog_get_drvdata(wdev);
+
+	/* Stop timer */
+	writew(WTCSR_MAGIC | 0, priv->base + WTCSR);
+
+	/* Must dummy read WRCSR:WOVF at least once before clearing */
+	readb(priv->base + WRCSR);
+	writew(WRCSR_CLEAR_WOVF, priv->base + WRCSR);
+
+	/*
+	 * Start timer with fastest clock source and only 1 clock left before
+	 * overflow with reset option enabled.
+	 */
+	writew(WRCSR_MAGIC | WRCSR_RSTE, priv->base + WRCSR);
+	writew(WTCNT_MAGIC | 255, priv->base + WTCNT);
+	writew(WTCSR_MAGIC | WTSCR_WT | WTSCR_TME, priv->base + WTCSR);
+
+	/*
+	 * Actually make sure the above sequence hits hardware before sleeping.
+	 */
+	wmb();
+
+	/* Wait for WDT overflow (reset) */
+	udelay(20);
+
+	return 0;
+}
+
+static const struct watchdog_info rza_wdt_ident = {
+	.options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
+	.identity = "Renesas RZ/A WDT Watchdog",
+};
+
+static const struct watchdog_ops rza_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = rza_wdt_start,
+	.stop = rza_wdt_stop,
+	.ping = rza_wdt_ping,
+	.restart = rza_wdt_restart,
+};
+
+static int rza_wdt_probe(struct platform_device *pdev)
+{
+	struct rza_wdt *priv;
+	struct resource *res;
+	unsigned long rate;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
+	rate = clk_get_rate(priv->clk);
+	if (rate < 16384) {
+		dev_err(&pdev->dev, "invalid clock rate (%ld)\n", rate);
+		return -ENOENT;
+	}
+
+	/* Assume slowest clock rate possible (CKS=7) */
+	rate /= 16384;
+
+	priv->wdev.info = &rza_wdt_ident,
+	priv->wdev.ops = &rza_wdt_ops,
+	priv->wdev.parent = &pdev->dev;
+
+	/*
+	 * Since the max possible timeout of our 8-bit count register is less
+	 * than a second, we must use max_hw_heartbeat_ms.
+	 */
+	priv->wdev.max_hw_heartbeat_ms = (1000 * U8_MAX) / rate;
+	dev_dbg(&pdev->dev, "max hw timeout of %dms\n",
+		 priv->wdev.max_hw_heartbeat_ms);
+
+	priv->wdev.min_timeout = 1;
+	priv->wdev.timeout = DEFAULT_TIMEOUT;
+
+	watchdog_init_timeout(&priv->wdev, 0, &pdev->dev);
+	watchdog_set_drvdata(&priv->wdev, priv);
+
+	ret = devm_watchdog_register_device(&pdev->dev, &priv->wdev);
+	if (ret)
+		dev_err(&pdev->dev, "Cannot register watchdog device\n");
+
+	return ret;
+}
+
+static const struct of_device_id rza_wdt_of_match[] = {
+	{ .compatible = "renesas,rza-wdt", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rza_wdt_of_match);
+
+static struct platform_driver rza_wdt_driver = {
+	.probe = rza_wdt_probe,
+	.driver = {
+		.name = "rza_wdt",
+		.of_match_table = rza_wdt_of_match,
+	},
+};
+
+module_platform_driver(rza_wdt_driver);
+
+MODULE_DESCRIPTION("Renesas RZ/A WDT Driver");
+MODULE_AUTHOR("Chris Brandt <chris.brandt@renesas.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
new file mode 100644
index 000000000..adaa43543
--- /dev/null
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -0,0 +1,754 @@
+/*
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 Watchdog Timer Support
+ *
+ * Based on, softdog.c by Alan Cox,
+ *     (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/cpufreq.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+
+#define S3C2410_WTCON		0x00
+#define S3C2410_WTDAT		0x04
+#define S3C2410_WTCNT		0x08
+#define S3C2410_WTCLRINT	0x0c
+
+#define S3C2410_WTCNT_MAXCNT	0xffff
+
+#define S3C2410_WTCON_RSTEN	(1 << 0)
+#define S3C2410_WTCON_INTEN	(1 << 2)
+#define S3C2410_WTCON_ENABLE	(1 << 5)
+
+#define S3C2410_WTCON_DIV16	(0 << 3)
+#define S3C2410_WTCON_DIV32	(1 << 3)
+#define S3C2410_WTCON_DIV64	(2 << 3)
+#define S3C2410_WTCON_DIV128	(3 << 3)
+
+#define S3C2410_WTCON_MAXDIV	0x80
+
+#define S3C2410_WTCON_PRESCALE(x)	((x) << 8)
+#define S3C2410_WTCON_PRESCALE_MASK	(0xff << 8)
+#define S3C2410_WTCON_PRESCALE_MAX	0xff
+
+#define S3C2410_WATCHDOG_ATBOOT		(0)
+#define S3C2410_WATCHDOG_DEFAULT_TIME	(15)
+
+#define EXYNOS5_RST_STAT_REG_OFFSET		0x0404
+#define EXYNOS5_WDT_DISABLE_REG_OFFSET		0x0408
+#define EXYNOS5_WDT_MASK_RESET_REG_OFFSET	0x040c
+#define QUIRK_HAS_PMU_CONFIG			(1 << 0)
+#define QUIRK_HAS_RST_STAT			(1 << 1)
+#define QUIRK_HAS_WTCLRINT_REG			(1 << 2)
+
+/* These quirks require that we have a PMU register map */
+#define QUIRKS_HAVE_PMUREG			(QUIRK_HAS_PMU_CONFIG | \
+						 QUIRK_HAS_RST_STAT)
+
+static bool nowayout	= WATCHDOG_NOWAYOUT;
+static int tmr_margin;
+static int tmr_atboot	= S3C2410_WATCHDOG_ATBOOT;
+static int soft_noboot;
+
+module_param(tmr_margin,  int, 0);
+module_param(tmr_atboot,  int, 0);
+module_param(nowayout,   bool, 0);
+module_param(soft_noboot, int, 0);
+
+MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default="
+		__MODULE_STRING(S3C2410_WATCHDOG_DEFAULT_TIME) ")");
+MODULE_PARM_DESC(tmr_atboot,
+		"Watchdog is started at boot time if set to 1, default="
+			__MODULE_STRING(S3C2410_WATCHDOG_ATBOOT));
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+			__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default 0)");
+
+/**
+ * struct s3c2410_wdt_variant - Per-variant config data
+ *
+ * @disable_reg: Offset in pmureg for the register that disables the watchdog
+ * timer reset functionality.
+ * @mask_reset_reg: Offset in pmureg for the register that masks the watchdog
+ * timer reset functionality.
+ * @mask_bit: Bit number for the watchdog timer in the disable register and the
+ * mask reset register.
+ * @rst_stat_reg: Offset in pmureg for the register that has the reset status.
+ * @rst_stat_bit: Bit number in the rst_stat register indicating a watchdog
+ * reset.
+ * @quirks: A bitfield of quirks.
+ */
+
+struct s3c2410_wdt_variant {
+	int disable_reg;
+	int mask_reset_reg;
+	int mask_bit;
+	int rst_stat_reg;
+	int rst_stat_bit;
+	u32 quirks;
+};
+
+struct s3c2410_wdt {
+	struct device		*dev;
+	struct clk		*clock;
+	void __iomem		*reg_base;
+	unsigned int		count;
+	spinlock_t		lock;
+	unsigned long		wtcon_save;
+	unsigned long		wtdat_save;
+	struct watchdog_device	wdt_device;
+	struct notifier_block	freq_transition;
+	const struct s3c2410_wdt_variant *drv_data;
+	struct regmap *pmureg;
+};
+
+static const struct s3c2410_wdt_variant drv_data_s3c2410 = {
+	.quirks = 0
+};
+
+#ifdef CONFIG_OF
+static const struct s3c2410_wdt_variant drv_data_s3c6410 = {
+	.quirks = QUIRK_HAS_WTCLRINT_REG,
+};
+
+static const struct s3c2410_wdt_variant drv_data_exynos5250  = {
+	.disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET,
+	.mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET,
+	.mask_bit = 20,
+	.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
+	.rst_stat_bit = 20,
+	.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT \
+		  | QUIRK_HAS_WTCLRINT_REG,
+};
+
+static const struct s3c2410_wdt_variant drv_data_exynos5420 = {
+	.disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET,
+	.mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET,
+	.mask_bit = 0,
+	.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
+	.rst_stat_bit = 9,
+	.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT \
+		  | QUIRK_HAS_WTCLRINT_REG,
+};
+
+static const struct s3c2410_wdt_variant drv_data_exynos7 = {
+	.disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET,
+	.mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET,
+	.mask_bit = 23,
+	.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
+	.rst_stat_bit = 23,	/* A57 WDTRESET */
+	.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT \
+		  | QUIRK_HAS_WTCLRINT_REG,
+};
+
+static const struct of_device_id s3c2410_wdt_match[] = {
+	{ .compatible = "samsung,s3c2410-wdt",
+	  .data = &drv_data_s3c2410 },
+	{ .compatible = "samsung,s3c6410-wdt",
+	  .data = &drv_data_s3c6410 },
+	{ .compatible = "samsung,exynos5250-wdt",
+	  .data = &drv_data_exynos5250 },
+	{ .compatible = "samsung,exynos5420-wdt",
+	  .data = &drv_data_exynos5420 },
+	{ .compatible = "samsung,exynos7-wdt",
+	  .data = &drv_data_exynos7 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, s3c2410_wdt_match);
+#endif
+
+static const struct platform_device_id s3c2410_wdt_ids[] = {
+	{
+		.name = "s3c2410-wdt",
+		.driver_data = (unsigned long)&drv_data_s3c2410,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(platform, s3c2410_wdt_ids);
+
+/* functions */
+
+static inline unsigned int s3c2410wdt_max_timeout(struct clk *clock)
+{
+	unsigned long freq = clk_get_rate(clock);
+
+	return S3C2410_WTCNT_MAXCNT / (freq / (S3C2410_WTCON_PRESCALE_MAX + 1)
+				       / S3C2410_WTCON_MAXDIV);
+}
+
+static inline struct s3c2410_wdt *freq_to_wdt(struct notifier_block *nb)
+{
+	return container_of(nb, struct s3c2410_wdt, freq_transition);
+}
+
+static int s3c2410wdt_mask_and_disable_reset(struct s3c2410_wdt *wdt, bool mask)
+{
+	int ret;
+	u32 mask_val = 1 << wdt->drv_data->mask_bit;
+	u32 val = 0;
+
+	/* No need to do anything if no PMU CONFIG needed */
+	if (!(wdt->drv_data->quirks & QUIRK_HAS_PMU_CONFIG))
+		return 0;
+
+	if (mask)
+		val = mask_val;
+
+	ret = regmap_update_bits(wdt->pmureg,
+			wdt->drv_data->disable_reg,
+			mask_val, val);
+	if (ret < 0)
+		goto error;
+
+	ret = regmap_update_bits(wdt->pmureg,
+			wdt->drv_data->mask_reset_reg,
+			mask_val, val);
+ error:
+	if (ret < 0)
+		dev_err(wdt->dev, "failed to update reg(%d)\n", ret);
+
+	return ret;
+}
+
+static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
+{
+	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	spin_lock(&wdt->lock);
+	writel(wdt->count, wdt->reg_base + S3C2410_WTCNT);
+	spin_unlock(&wdt->lock);
+
+	return 0;
+}
+
+static void __s3c2410wdt_stop(struct s3c2410_wdt *wdt)
+{
+	unsigned long wtcon;
+
+	wtcon = readl(wdt->reg_base + S3C2410_WTCON);
+	wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN);
+	writel(wtcon, wdt->reg_base + S3C2410_WTCON);
+}
+
+static int s3c2410wdt_stop(struct watchdog_device *wdd)
+{
+	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	spin_lock(&wdt->lock);
+	__s3c2410wdt_stop(wdt);
+	spin_unlock(&wdt->lock);
+
+	return 0;
+}
+
+static int s3c2410wdt_start(struct watchdog_device *wdd)
+{
+	unsigned long wtcon;
+	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	spin_lock(&wdt->lock);
+
+	__s3c2410wdt_stop(wdt);
+
+	wtcon = readl(wdt->reg_base + S3C2410_WTCON);
+	wtcon |= S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128;
+
+	if (soft_noboot) {
+		wtcon |= S3C2410_WTCON_INTEN;
+		wtcon &= ~S3C2410_WTCON_RSTEN;
+	} else {
+		wtcon &= ~S3C2410_WTCON_INTEN;
+		wtcon |= S3C2410_WTCON_RSTEN;
+	}
+
+	dev_dbg(wdt->dev, "Starting watchdog: count=0x%08x, wtcon=%08lx\n",
+		wdt->count, wtcon);
+
+	writel(wdt->count, wdt->reg_base + S3C2410_WTDAT);
+	writel(wdt->count, wdt->reg_base + S3C2410_WTCNT);
+	writel(wtcon, wdt->reg_base + S3C2410_WTCON);
+	spin_unlock(&wdt->lock);
+
+	return 0;
+}
+
+static inline int s3c2410wdt_is_running(struct s3c2410_wdt *wdt)
+{
+	return readl(wdt->reg_base + S3C2410_WTCON) & S3C2410_WTCON_ENABLE;
+}
+
+static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd,
+				    unsigned int timeout)
+{
+	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
+	unsigned long freq = clk_get_rate(wdt->clock);
+	unsigned int count;
+	unsigned int divisor = 1;
+	unsigned long wtcon;
+
+	if (timeout < 1)
+		return -EINVAL;
+
+	freq = DIV_ROUND_UP(freq, 128);
+	count = timeout * freq;
+
+	dev_dbg(wdt->dev, "Heartbeat: count=%d, timeout=%d, freq=%lu\n",
+		count, timeout, freq);
+
+	/* if the count is bigger than the watchdog register,
+	   then work out what we need to do (and if) we can
+	   actually make this value
+	*/
+
+	if (count >= 0x10000) {
+		divisor = DIV_ROUND_UP(count, 0xffff);
+
+		if (divisor > 0x100) {
+			dev_err(wdt->dev, "timeout %d too big\n", timeout);
+			return -EINVAL;
+		}
+	}
+
+	dev_dbg(wdt->dev, "Heartbeat: timeout=%d, divisor=%d, count=%d (%08x)\n",
+		timeout, divisor, count, DIV_ROUND_UP(count, divisor));
+
+	count = DIV_ROUND_UP(count, divisor);
+	wdt->count = count;
+
+	/* update the pre-scaler */
+	wtcon = readl(wdt->reg_base + S3C2410_WTCON);
+	wtcon &= ~S3C2410_WTCON_PRESCALE_MASK;
+	wtcon |= S3C2410_WTCON_PRESCALE(divisor-1);
+
+	writel(count, wdt->reg_base + S3C2410_WTDAT);
+	writel(wtcon, wdt->reg_base + S3C2410_WTCON);
+
+	wdd->timeout = (count * divisor) / freq;
+
+	return 0;
+}
+
+static int s3c2410wdt_restart(struct watchdog_device *wdd, unsigned long action,
+			      void *data)
+{
+	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
+	void __iomem *wdt_base = wdt->reg_base;
+
+	/* disable watchdog, to be safe  */
+	writel(0, wdt_base + S3C2410_WTCON);
+
+	/* put initial values into count and data */
+	writel(0x80, wdt_base + S3C2410_WTCNT);
+	writel(0x80, wdt_base + S3C2410_WTDAT);
+
+	/* set the watchdog to go and reset... */
+	writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV16 |
+		S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x20),
+		wdt_base + S3C2410_WTCON);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	return 0;
+}
+
+#define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
+
+static const struct watchdog_info s3c2410_wdt_ident = {
+	.options          =     OPTIONS,
+	.firmware_version =	0,
+	.identity         =	"S3C2410 Watchdog",
+};
+
+static const struct watchdog_ops s3c2410wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = s3c2410wdt_start,
+	.stop = s3c2410wdt_stop,
+	.ping = s3c2410wdt_keepalive,
+	.set_timeout = s3c2410wdt_set_heartbeat,
+	.restart = s3c2410wdt_restart,
+};
+
+static const struct watchdog_device s3c2410_wdd = {
+	.info = &s3c2410_wdt_ident,
+	.ops = &s3c2410wdt_ops,
+	.timeout = S3C2410_WATCHDOG_DEFAULT_TIME,
+};
+
+/* interrupt handler code */
+
+static irqreturn_t s3c2410wdt_irq(int irqno, void *param)
+{
+	struct s3c2410_wdt *wdt = platform_get_drvdata(param);
+
+	dev_info(wdt->dev, "watchdog timer expired (irq)\n");
+
+	s3c2410wdt_keepalive(&wdt->wdt_device);
+
+	if (wdt->drv_data->quirks & QUIRK_HAS_WTCLRINT_REG)
+		writel(0x1, wdt->reg_base + S3C2410_WTCLRINT);
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
+
+static int s3c2410wdt_cpufreq_transition(struct notifier_block *nb,
+					  unsigned long val, void *data)
+{
+	int ret;
+	struct s3c2410_wdt *wdt = freq_to_wdt(nb);
+
+	if (!s3c2410wdt_is_running(wdt))
+		goto done;
+
+	if (val == CPUFREQ_PRECHANGE) {
+		/* To ensure that over the change we don't cause the
+		 * watchdog to trigger, we perform an keep-alive if
+		 * the watchdog is running.
+		 */
+
+		s3c2410wdt_keepalive(&wdt->wdt_device);
+	} else if (val == CPUFREQ_POSTCHANGE) {
+		s3c2410wdt_stop(&wdt->wdt_device);
+
+		ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
+						wdt->wdt_device.timeout);
+
+		if (ret >= 0)
+			s3c2410wdt_start(&wdt->wdt_device);
+		else
+			goto err;
+	}
+
+done:
+	return 0;
+
+ err:
+	dev_err(wdt->dev, "cannot set new value for timeout %d\n",
+				wdt->wdt_device.timeout);
+	return ret;
+}
+
+static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt)
+{
+	wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition;
+
+	return cpufreq_register_notifier(&wdt->freq_transition,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
+{
+	wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition;
+
+	cpufreq_unregister_notifier(&wdt->freq_transition,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+
+static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt)
+{
+	return 0;
+}
+
+static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
+{
+}
+#endif
+
+static inline unsigned int s3c2410wdt_get_bootstatus(struct s3c2410_wdt *wdt)
+{
+	unsigned int rst_stat;
+	int ret;
+
+	if (!(wdt->drv_data->quirks & QUIRK_HAS_RST_STAT))
+		return 0;
+
+	ret = regmap_read(wdt->pmureg, wdt->drv_data->rst_stat_reg, &rst_stat);
+	if (ret)
+		dev_warn(wdt->dev, "Couldn't get RST_STAT register\n");
+	else if (rst_stat & BIT(wdt->drv_data->rst_stat_bit))
+		return WDIOF_CARDRESET;
+
+	return 0;
+}
+
+static inline const struct s3c2410_wdt_variant *
+s3c2410_get_wdt_drv_data(struct platform_device *pdev)
+{
+	const struct s3c2410_wdt_variant *variant;
+
+	variant = of_device_get_match_data(&pdev->dev);
+	if (!variant) {
+		/* Device matched by platform_device_id */
+		variant = (struct s3c2410_wdt_variant *)
+			   platform_get_device_id(pdev)->driver_data;
+	}
+
+	return variant;
+}
+
+static int s3c2410wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct s3c2410_wdt *wdt;
+	struct resource *wdt_mem;
+	struct resource *wdt_irq;
+	unsigned int wtcon;
+	int started = 0;
+	int ret;
+
+	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdt->dev = dev;
+	spin_lock_init(&wdt->lock);
+	wdt->wdt_device = s3c2410_wdd;
+
+	wdt->drv_data = s3c2410_get_wdt_drv_data(pdev);
+	if (wdt->drv_data->quirks & QUIRKS_HAVE_PMUREG) {
+		wdt->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node,
+						"samsung,syscon-phandle");
+		if (IS_ERR(wdt->pmureg)) {
+			dev_err(dev, "syscon regmap lookup failed.\n");
+			return PTR_ERR(wdt->pmureg);
+		}
+	}
+
+	wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (wdt_irq == NULL) {
+		dev_err(dev, "no irq resource specified\n");
+		ret = -ENOENT;
+		goto err;
+	}
+
+	/* get the memory region for the watchdog timer */
+	wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->reg_base = devm_ioremap_resource(dev, wdt_mem);
+	if (IS_ERR(wdt->reg_base)) {
+		ret = PTR_ERR(wdt->reg_base);
+		goto err;
+	}
+
+	wdt->clock = devm_clk_get(dev, "watchdog");
+	if (IS_ERR(wdt->clock)) {
+		dev_err(dev, "failed to find watchdog clock source\n");
+		ret = PTR_ERR(wdt->clock);
+		goto err;
+	}
+
+	ret = clk_prepare_enable(wdt->clock);
+	if (ret < 0) {
+		dev_err(dev, "failed to enable clock\n");
+		return ret;
+	}
+
+	wdt->wdt_device.min_timeout = 1;
+	wdt->wdt_device.max_timeout = s3c2410wdt_max_timeout(wdt->clock);
+
+	ret = s3c2410wdt_cpufreq_register(wdt);
+	if (ret < 0) {
+		dev_err(dev, "failed to register cpufreq\n");
+		goto err_clk;
+	}
+
+	watchdog_set_drvdata(&wdt->wdt_device, wdt);
+
+	/* see if we can actually set the requested timer margin, and if
+	 * not, try the default value */
+
+	watchdog_init_timeout(&wdt->wdt_device, tmr_margin, dev);
+	ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
+					wdt->wdt_device.timeout);
+	if (ret) {
+		started = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
+					S3C2410_WATCHDOG_DEFAULT_TIME);
+
+		if (started == 0)
+			dev_info(dev,
+				 "tmr_margin value out of range, default %d used\n",
+				 S3C2410_WATCHDOG_DEFAULT_TIME);
+		else
+			dev_info(dev, "default timer value is out of range, cannot start\n");
+	}
+
+	ret = devm_request_irq(dev, wdt_irq->start, s3c2410wdt_irq, 0,
+				pdev->name, pdev);
+	if (ret != 0) {
+		dev_err(dev, "failed to install irq (%d)\n", ret);
+		goto err_cpufreq;
+	}
+
+	watchdog_set_nowayout(&wdt->wdt_device, nowayout);
+	watchdog_set_restart_priority(&wdt->wdt_device, 128);
+
+	wdt->wdt_device.bootstatus = s3c2410wdt_get_bootstatus(wdt);
+	wdt->wdt_device.parent = dev;
+
+	ret = watchdog_register_device(&wdt->wdt_device);
+	if (ret) {
+		dev_err(dev, "cannot register watchdog (%d)\n", ret);
+		goto err_cpufreq;
+	}
+
+	ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
+	if (ret < 0)
+		goto err_unregister;
+
+	if (tmr_atboot && started == 0) {
+		dev_info(dev, "starting watchdog timer\n");
+		s3c2410wdt_start(&wdt->wdt_device);
+	} else if (!tmr_atboot) {
+		/* if we're not enabling the watchdog, then ensure it is
+		 * disabled if it has been left running from the bootloader
+		 * or other source */
+
+		s3c2410wdt_stop(&wdt->wdt_device);
+	}
+
+	platform_set_drvdata(pdev, wdt);
+
+	/* print out a statement of readiness */
+
+	wtcon = readl(wdt->reg_base + S3C2410_WTCON);
+
+	dev_info(dev, "watchdog %sactive, reset %sabled, irq %sabled\n",
+		 (wtcon & S3C2410_WTCON_ENABLE) ?  "" : "in",
+		 (wtcon & S3C2410_WTCON_RSTEN) ? "en" : "dis",
+		 (wtcon & S3C2410_WTCON_INTEN) ? "en" : "dis");
+
+	return 0;
+
+ err_unregister:
+	watchdog_unregister_device(&wdt->wdt_device);
+
+ err_cpufreq:
+	s3c2410wdt_cpufreq_deregister(wdt);
+
+ err_clk:
+	clk_disable_unprepare(wdt->clock);
+
+ err:
+	return ret;
+}
+
+static int s3c2410wdt_remove(struct platform_device *dev)
+{
+	int ret;
+	struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
+
+	ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
+	if (ret < 0)
+		return ret;
+
+	watchdog_unregister_device(&wdt->wdt_device);
+
+	s3c2410wdt_cpufreq_deregister(wdt);
+
+	clk_disable_unprepare(wdt->clock);
+
+	return 0;
+}
+
+static void s3c2410wdt_shutdown(struct platform_device *dev)
+{
+	struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
+
+	s3c2410wdt_mask_and_disable_reset(wdt, true);
+
+	s3c2410wdt_stop(&wdt->wdt_device);
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int s3c2410wdt_suspend(struct device *dev)
+{
+	int ret;
+	struct s3c2410_wdt *wdt = dev_get_drvdata(dev);
+
+	/* Save watchdog state, and turn it off. */
+	wdt->wtcon_save = readl(wdt->reg_base + S3C2410_WTCON);
+	wdt->wtdat_save = readl(wdt->reg_base + S3C2410_WTDAT);
+
+	ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
+	if (ret < 0)
+		return ret;
+
+	/* Note that WTCNT doesn't need to be saved. */
+	s3c2410wdt_stop(&wdt->wdt_device);
+
+	return 0;
+}
+
+static int s3c2410wdt_resume(struct device *dev)
+{
+	int ret;
+	struct s3c2410_wdt *wdt = dev_get_drvdata(dev);
+
+	/* Restore watchdog state. */
+	writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTDAT);
+	writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTCNT);/* Reset count */
+	writel(wdt->wtcon_save, wdt->reg_base + S3C2410_WTCON);
+
+	ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
+	if (ret < 0)
+		return ret;
+
+	dev_info(dev, "watchdog %sabled\n",
+		(wdt->wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(s3c2410wdt_pm_ops, s3c2410wdt_suspend,
+			s3c2410wdt_resume);
+
+static struct platform_driver s3c2410wdt_driver = {
+	.probe		= s3c2410wdt_probe,
+	.remove		= s3c2410wdt_remove,
+	.shutdown	= s3c2410wdt_shutdown,
+	.id_table	= s3c2410_wdt_ids,
+	.driver		= {
+		.name	= "s3c2410-wdt",
+		.pm	= &s3c2410wdt_pm_ops,
+		.of_match_table	= of_match_ptr(s3c2410_wdt_match),
+	},
+};
+
+module_platform_driver(s3c2410wdt_driver);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Dimitry Andric <dimitry.andric@tomtom.com>");
+MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c
new file mode 100644
index 000000000..d3be4f831
--- /dev/null
+++ b/drivers/watchdog/sa1100_wdt.c
@@ -0,0 +1,219 @@
+/*
+ *	Watchdog driver for the SA11x0/PXA2xx
+ *
+ *	(c) Copyright 2000 Oleg Drokin <green@crimea.edu>
+ *	    Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Oleg Drokin nor iXcelerator.com admit liability nor provide
+ *	warranty for any of this software. This material is provided
+ *	"AS-IS" and at no charge.
+ *
+ *	(c) Copyright 2000           Oleg Drokin <green@crimea.edu>
+ *
+ *	27/11/2000 Initial release
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/clk.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/uaccess.h>
+#include <linux/timex.h>
+
+#ifdef CONFIG_ARCH_PXA
+#include <mach/regs-ost.h>
+#endif
+
+#include <mach/reset.h>
+#include <mach/hardware.h>
+
+static unsigned long oscr_freq;
+static unsigned long sa1100wdt_users;
+static unsigned int pre_margin;
+static int boot_status;
+
+/*
+ *	Allow only one person to hold it open
+ */
+static int sa1100dog_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(1, &sa1100wdt_users))
+		return -EBUSY;
+
+	/* Activate SA1100 Watchdog timer */
+	writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
+	writel_relaxed(OSSR_M3, OSSR);
+	writel_relaxed(OWER_WME, OWER);
+	writel_relaxed(readl_relaxed(OIER) | OIER_E3, OIER);
+	return nonseekable_open(inode, file);
+}
+
+/*
+ * The watchdog cannot be disabled.
+ *
+ * Previous comments suggested that turning off the interrupt by
+ * clearing OIER[E3] would prevent the watchdog timing out but this
+ * does not appear to be true (at least on the PXA255).
+ */
+static int sa1100dog_release(struct inode *inode, struct file *file)
+{
+	pr_crit("Device closed - timer will not stop\n");
+	clear_bit(1, &sa1100wdt_users);
+	return 0;
+}
+
+static ssize_t sa1100dog_write(struct file *file, const char __user *data,
+						size_t len, loff_t *ppos)
+{
+	if (len)
+		/* Refresh OSMR3 timer. */
+		writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
+	return len;
+}
+
+static const struct watchdog_info ident = {
+	.options	= WDIOF_CARDRESET | WDIOF_SETTIMEOUT
+				| WDIOF_KEEPALIVEPING,
+	.identity	= "SA1100/PXA255 Watchdog",
+	.firmware_version	= 1,
+};
+
+static long sa1100dog_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	int ret = -ENOTTY;
+	int time;
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = copy_to_user(argp, &ident,
+				   sizeof(ident)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETSTATUS:
+		ret = put_user(0, p);
+		break;
+
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(boot_status, p);
+		break;
+
+	case WDIOC_KEEPALIVE:
+		writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
+		ret = 0;
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		ret = get_user(time, p);
+		if (ret)
+			break;
+
+		if (time <= 0 || (oscr_freq * (long long)time >= 0xffffffff)) {
+			ret = -EINVAL;
+			break;
+		}
+
+		pre_margin = oscr_freq * time;
+		writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
+		/*fall through*/
+
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(pre_margin / oscr_freq, p);
+		break;
+	}
+	return ret;
+}
+
+static const struct file_operations sa1100dog_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= sa1100dog_write,
+	.unlocked_ioctl	= sa1100dog_ioctl,
+	.open		= sa1100dog_open,
+	.release	= sa1100dog_release,
+};
+
+static struct miscdevice sa1100dog_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &sa1100dog_fops,
+};
+
+static int margin __initdata = 60;		/* (secs) Default is 1 minute */
+static struct clk *clk;
+
+static int __init sa1100dog_init(void)
+{
+	int ret;
+
+	clk = clk_get(NULL, "OSTIMER0");
+	if (IS_ERR(clk)) {
+		pr_err("SA1100/PXA2xx Watchdog Timer: clock not found: %d\n",
+		       (int) PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("SA1100/PXA2xx Watchdog Timer: clock failed to prepare+enable: %d\n",
+		       ret);
+		goto err;
+	}
+
+	oscr_freq = clk_get_rate(clk);
+
+	/*
+	 * Read the reset status, and save it for later.  If
+	 * we suspend, RCSR will be cleared, and the watchdog
+	 * reset reason will be lost.
+	 */
+	boot_status = (reset_status & RESET_STATUS_WATCHDOG) ?
+				WDIOF_CARDRESET : 0;
+	pre_margin = oscr_freq * margin;
+
+	ret = misc_register(&sa1100dog_miscdev);
+	if (ret == 0) {
+		pr_info("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n",
+			margin);
+		return 0;
+	}
+
+	clk_disable_unprepare(clk);
+err:
+	clk_put(clk);
+	return ret;
+}
+
+static void __exit sa1100dog_exit(void)
+{
+	misc_deregister(&sa1100dog_miscdev);
+	clk_disable_unprepare(clk);
+	clk_put(clk);
+}
+
+module_init(sa1100dog_init);
+module_exit(sa1100dog_exit);
+
+MODULE_AUTHOR("Oleg Drokin <green@crimea.edu>");
+MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog");
+
+module_param(margin, int, 0);
+MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/sama5d4_wdt.c b/drivers/watchdog/sama5d4_wdt.c
new file mode 100644
index 000000000..d4953365d
--- /dev/null
+++ b/drivers/watchdog/sama5d4_wdt.c
@@ -0,0 +1,324 @@
+/*
+ * Driver for Atmel SAMA5D4 Watchdog Timer
+ *
+ * Copyright (C) 2015 Atmel Corporation
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/watchdog.h>
+
+#include "at91sam9_wdt.h"
+
+/* minimum and maximum watchdog timeout, in seconds */
+#define MIN_WDT_TIMEOUT		1
+#define MAX_WDT_TIMEOUT		16
+#define WDT_DEFAULT_TIMEOUT	MAX_WDT_TIMEOUT
+
+#define WDT_SEC2TICKS(s)	((s) ? (((s) << 8) - 1) : 0)
+
+struct sama5d4_wdt {
+	struct watchdog_device	wdd;
+	void __iomem		*reg_base;
+	u32			mr;
+	unsigned long		last_ping;
+};
+
+static int wdt_timeout;
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+module_param(wdt_timeout, int, 0);
+MODULE_PARM_DESC(wdt_timeout,
+	"Watchdog timeout in seconds. (default = "
+	__MODULE_STRING(WDT_DEFAULT_TIMEOUT) ")");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+#define wdt_enabled (!(wdt->mr & AT91_WDT_WDDIS))
+
+#define wdt_read(wdt, field) \
+	readl_relaxed((wdt)->reg_base + (field))
+
+/* 4 slow clock periods is 4/32768 = 122.07µs*/
+#define WDT_DELAY	usecs_to_jiffies(123)
+
+static void wdt_write(struct sama5d4_wdt *wdt, u32 field, u32 val)
+{
+	/*
+	 * WDT_CR and WDT_MR must not be modified within three slow clock
+	 * periods following a restart of the watchdog performed by a write
+	 * access in WDT_CR.
+	 */
+	while (time_before(jiffies, wdt->last_ping + WDT_DELAY))
+		usleep_range(30, 125);
+	writel_relaxed(val, wdt->reg_base + field);
+	wdt->last_ping = jiffies;
+}
+
+static void wdt_write_nosleep(struct sama5d4_wdt *wdt, u32 field, u32 val)
+{
+	if (time_before(jiffies, wdt->last_ping + WDT_DELAY))
+		udelay(123);
+	writel_relaxed(val, wdt->reg_base + field);
+	wdt->last_ping = jiffies;
+}
+
+static int sama5d4_wdt_start(struct watchdog_device *wdd)
+{
+	struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	wdt->mr &= ~AT91_WDT_WDDIS;
+	wdt_write(wdt, AT91_WDT_MR, wdt->mr);
+
+	return 0;
+}
+
+static int sama5d4_wdt_stop(struct watchdog_device *wdd)
+{
+	struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	wdt->mr |= AT91_WDT_WDDIS;
+	wdt_write(wdt, AT91_WDT_MR, wdt->mr);
+
+	return 0;
+}
+
+static int sama5d4_wdt_ping(struct watchdog_device *wdd)
+{
+	struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	wdt_write(wdt, AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT);
+
+	return 0;
+}
+
+static int sama5d4_wdt_set_timeout(struct watchdog_device *wdd,
+				 unsigned int timeout)
+{
+	struct sama5d4_wdt *wdt = watchdog_get_drvdata(wdd);
+	u32 value = WDT_SEC2TICKS(timeout);
+
+	wdt->mr &= ~AT91_WDT_WDV;
+	wdt->mr |= AT91_WDT_SET_WDV(value);
+
+	/*
+	 * WDDIS has to be 0 when updating WDD/WDV. The datasheet states: When
+	 * setting the WDDIS bit, and while it is set, the fields WDV and WDD
+	 * must not be modified.
+	 * If the watchdog is enabled, then the timeout can be updated. Else,
+	 * wait that the user enables it.
+	 */
+	if (wdt_enabled)
+		wdt_write(wdt, AT91_WDT_MR, wdt->mr & ~AT91_WDT_WDDIS);
+
+	wdd->timeout = timeout;
+
+	return 0;
+}
+
+static const struct watchdog_info sama5d4_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+	.identity = "Atmel SAMA5D4 Watchdog",
+};
+
+static const struct watchdog_ops sama5d4_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = sama5d4_wdt_start,
+	.stop = sama5d4_wdt_stop,
+	.ping = sama5d4_wdt_ping,
+	.set_timeout = sama5d4_wdt_set_timeout,
+};
+
+static irqreturn_t sama5d4_wdt_irq_handler(int irq, void *dev_id)
+{
+	struct sama5d4_wdt *wdt = platform_get_drvdata(dev_id);
+
+	if (wdt_read(wdt, AT91_WDT_SR)) {
+		pr_crit("Atmel Watchdog Software Reset\n");
+		emergency_restart();
+		pr_crit("Reboot didn't succeed\n");
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int of_sama5d4_wdt_init(struct device_node *np, struct sama5d4_wdt *wdt)
+{
+	const char *tmp;
+
+	wdt->mr = AT91_WDT_WDDIS;
+
+	if (!of_property_read_string(np, "atmel,watchdog-type", &tmp) &&
+	    !strcmp(tmp, "software"))
+		wdt->mr |= AT91_WDT_WDFIEN;
+	else
+		wdt->mr |= AT91_WDT_WDRSTEN;
+
+	if (of_property_read_bool(np, "atmel,idle-halt"))
+		wdt->mr |= AT91_WDT_WDIDLEHLT;
+
+	if (of_property_read_bool(np, "atmel,dbg-halt"))
+		wdt->mr |= AT91_WDT_WDDBGHLT;
+
+	return 0;
+}
+
+static int sama5d4_wdt_init(struct sama5d4_wdt *wdt)
+{
+	u32 reg;
+	/*
+	 * When booting and resuming, the bootloader may have changed the
+	 * watchdog configuration.
+	 * If the watchdog is already running, we can safely update it.
+	 * Else, we have to disable it properly.
+	 */
+	if (wdt_enabled) {
+		wdt_write_nosleep(wdt, AT91_WDT_MR, wdt->mr);
+	} else {
+		reg = wdt_read(wdt, AT91_WDT_MR);
+		if (!(reg & AT91_WDT_WDDIS))
+			wdt_write_nosleep(wdt, AT91_WDT_MR,
+					  reg | AT91_WDT_WDDIS);
+	}
+	return 0;
+}
+
+static int sama5d4_wdt_probe(struct platform_device *pdev)
+{
+	struct watchdog_device *wdd;
+	struct sama5d4_wdt *wdt;
+	struct resource *res;
+	void __iomem *regs;
+	u32 irq = 0;
+	u32 timeout;
+	int ret;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdd = &wdt->wdd;
+	wdd->timeout = WDT_DEFAULT_TIMEOUT;
+	wdd->info = &sama5d4_wdt_info;
+	wdd->ops = &sama5d4_wdt_ops;
+	wdd->min_timeout = MIN_WDT_TIMEOUT;
+	wdd->max_timeout = MAX_WDT_TIMEOUT;
+	wdt->last_ping = jiffies;
+
+	watchdog_set_drvdata(wdd, wdt);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	wdt->reg_base = regs;
+
+	irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	if (!irq)
+		dev_warn(&pdev->dev, "failed to get IRQ from DT\n");
+
+	ret = of_sama5d4_wdt_init(pdev->dev.of_node, wdt);
+	if (ret)
+		return ret;
+
+	if ((wdt->mr & AT91_WDT_WDFIEN) && irq) {
+		ret = devm_request_irq(&pdev->dev, irq, sama5d4_wdt_irq_handler,
+				       IRQF_SHARED | IRQF_IRQPOLL |
+				       IRQF_NO_SUSPEND, pdev->name, pdev);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"cannot register interrupt handler\n");
+			return ret;
+		}
+	}
+
+	watchdog_init_timeout(wdd, wdt_timeout, &pdev->dev);
+
+	timeout = WDT_SEC2TICKS(wdd->timeout);
+
+	wdt->mr |= AT91_WDT_SET_WDD(WDT_SEC2TICKS(MAX_WDT_TIMEOUT));
+	wdt->mr |= AT91_WDT_SET_WDV(timeout);
+
+	ret = sama5d4_wdt_init(wdt);
+	if (ret)
+		return ret;
+
+	watchdog_set_nowayout(wdd, nowayout);
+
+	ret = watchdog_register_device(wdd);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register watchdog device\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, wdt);
+
+	dev_info(&pdev->dev, "initialized (timeout = %d sec, nowayout = %d)\n",
+		 wdd->timeout, nowayout);
+
+	return 0;
+}
+
+static int sama5d4_wdt_remove(struct platform_device *pdev)
+{
+	struct sama5d4_wdt *wdt = platform_get_drvdata(pdev);
+
+	sama5d4_wdt_stop(&wdt->wdd);
+
+	watchdog_unregister_device(&wdt->wdd);
+
+	return 0;
+}
+
+static const struct of_device_id sama5d4_wdt_of_match[] = {
+	{ .compatible = "atmel,sama5d4-wdt", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sama5d4_wdt_of_match);
+
+#ifdef CONFIG_PM_SLEEP
+static int sama5d4_wdt_resume(struct device *dev)
+{
+	struct sama5d4_wdt *wdt = dev_get_drvdata(dev);
+
+	/*
+	 * FIXME: writing MR also pings the watchdog which may not be desired.
+	 * This should only be done when the registers are lost on suspend but
+	 * there is no way to get this information right now.
+	 */
+	sama5d4_wdt_init(wdt);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(sama5d4_wdt_pm_ops, NULL,
+			 sama5d4_wdt_resume);
+
+static struct platform_driver sama5d4_wdt_driver = {
+	.probe		= sama5d4_wdt_probe,
+	.remove		= sama5d4_wdt_remove,
+	.driver		= {
+		.name	= "sama5d4_wdt",
+		.pm	= &sama5d4_wdt_pm_ops,
+		.of_match_table = sama5d4_wdt_of_match,
+	}
+};
+module_platform_driver(sama5d4_wdt_driver);
+
+MODULE_AUTHOR("Atmel Corporation");
+MODULE_DESCRIPTION("Atmel SAMA5D4 Watchdog Timer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c
new file mode 100644
index 000000000..3abae5077
--- /dev/null
+++ b/drivers/watchdog/sb_wdog.c
@@ -0,0 +1,361 @@
+/*
+ * Watchdog driver for SiByte SB1 SoCs
+ *
+ * Copyright (C) 2007 OnStor, Inc. * Andrew Sharp <andy.sharp@lsi.com>
+ *
+ * This driver is intended to make the second of two hardware watchdogs
+ * on the Sibyte 12XX and 11XX SoCs available to the user.  There are two
+ * such devices available on the SoC, but it seems that there isn't an
+ * enumeration class for watchdogs in Linux like there is for RTCs.
+ * The second is used rather than the first because it uses IRQ 1,
+ * thereby avoiding all that IRQ 0 problematic nonsense.
+ *
+ * I have not tried this driver on a 1480 processor; it might work
+ * just well enough to really screw things up.
+ *
+ * It is a simple timer, and there is an interrupt that is raised the
+ * first time the timer expires.  The second time it expires, the chip
+ * is reset and there is no way to redirect that NMI.  Which could
+ * be problematic in some cases where this chip is sitting on the HT
+ * bus and has just taken responsibility for providing a cache block.
+ * Since the reset can't be redirected to the external reset pin, it is
+ * possible that other HT connected processors might hang and not reset.
+ * For Linux, a soft reset would probably be even worse than a hard reset.
+ * There you have it.
+ *
+ * The timer takes 23 bits of a 64 bit register (?) as a count value,
+ * and decrements the count every microsecond, for a max value of
+ * 0x7fffff usec or about 8.3ish seconds.
+ *
+ * This watchdog borrows some user semantics from the softdog driver,
+ * in that if you close the fd, it leaves the watchdog running, unless
+ * you previously wrote a 'V' to the fd, in which case it disables
+ * the watchdog when you close the fd like some other drivers.
+ *
+ * Based on various other watchdog drivers, which are probably all
+ * loosely based on something Alan Cox wrote years ago.
+ *
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	version 1 or 2 as published by the Free Software Foundation.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/fs.h>
+#include <linux/reboot.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/interrupt.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+static DEFINE_SPINLOCK(sbwd_lock);
+
+/*
+ * set the initial count value of a timer
+ *
+ * wdog is the iomem address of the cfg register
+ */
+void sbwdog_set(char __iomem *wdog, unsigned long t)
+{
+	spin_lock(&sbwd_lock);
+	__raw_writeb(0, wdog);
+	__raw_writeq(t & 0x7fffffUL, wdog - 0x10);
+	spin_unlock(&sbwd_lock);
+}
+
+/*
+ * cause the timer to [re]load it's initial count and start counting
+ * all over again
+ *
+ * wdog is the iomem address of the cfg register
+ */
+void sbwdog_pet(char __iomem *wdog)
+{
+	spin_lock(&sbwd_lock);
+	__raw_writeb(__raw_readb(wdog) | 1, wdog);
+	spin_unlock(&sbwd_lock);
+}
+
+static unsigned long sbwdog_gate; /* keeps it to one thread only */
+static char __iomem *kern_dog = (char __iomem *)(IO_BASE + (A_SCD_WDOG_CFG_0));
+static char __iomem *user_dog = (char __iomem *)(IO_BASE + (A_SCD_WDOG_CFG_1));
+static unsigned long timeout = 0x7fffffUL;	/* useconds: 8.3ish secs. */
+static int expect_close;
+
+static const struct watchdog_info ident = {
+	.options	= WDIOF_CARDRESET | WDIOF_SETTIMEOUT |
+					WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity	= "SiByte Watchdog",
+};
+
+/*
+ * Allow only a single thread to walk the dog
+ */
+static int sbwdog_open(struct inode *inode, struct file *file)
+{
+	nonseekable_open(inode, file);
+	if (test_and_set_bit(0, &sbwdog_gate))
+		return -EBUSY;
+	__module_get(THIS_MODULE);
+
+	/*
+	 * Activate the timer
+	 */
+	sbwdog_set(user_dog, timeout);
+	__raw_writeb(1, user_dog);
+
+	return 0;
+}
+
+/*
+ * Put the dog back in the kennel.
+ */
+static int sbwdog_release(struct inode *inode, struct file *file)
+{
+	if (expect_close == 42) {
+		__raw_writeb(0, user_dog);
+		module_put(THIS_MODULE);
+	} else {
+		pr_crit("%s: Unexpected close, not stopping watchdog!\n",
+			ident.identity);
+		sbwdog_pet(user_dog);
+	}
+	clear_bit(0, &sbwdog_gate);
+	expect_close = 0;
+
+	return 0;
+}
+
+/*
+ * 42 - the answer
+ */
+static ssize_t sbwdog_write(struct file *file, const char __user *data,
+			size_t len, loff_t *ppos)
+{
+	int i;
+
+	if (len) {
+		/*
+		 * restart the timer
+		 */
+		expect_close = 0;
+
+		for (i = 0; i != len; i++) {
+			char c;
+
+			if (get_user(c, data + i))
+				return -EFAULT;
+			if (c == 'V')
+				expect_close = 42;
+		}
+		sbwdog_pet(user_dog);
+	}
+
+	return len;
+}
+
+static long sbwdog_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
+{
+	int ret = -ENOTTY;
+	unsigned long time;
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(0, p);
+		break;
+
+	case WDIOC_KEEPALIVE:
+		sbwdog_pet(user_dog);
+		ret = 0;
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		ret = get_user(time, p);
+		if (ret)
+			break;
+
+		time *= 1000000;
+		if (time > 0x7fffffUL) {
+			ret = -EINVAL;
+			break;
+		}
+		timeout = time;
+		sbwdog_set(user_dog, timeout);
+		sbwdog_pet(user_dog);
+
+	case WDIOC_GETTIMEOUT:
+		/*
+		 * get the remaining count from the ... count register
+		 * which is 1*8 before the config register
+		 */
+		ret = put_user((u32)__raw_readq(user_dog - 8) / 1000000, p);
+		break;
+	}
+	return ret;
+}
+
+/*
+ *	Notifier for system down
+ */
+static int sbwdog_notify_sys(struct notifier_block *this, unsigned long code,
+								void *erf)
+{
+	if (code == SYS_DOWN || code == SYS_HALT) {
+		/*
+		 * sit and sit
+		 */
+		__raw_writeb(0, user_dog);
+		__raw_writeb(0, kern_dog);
+	}
+
+	return NOTIFY_DONE;
+}
+
+static const struct file_operations sbwdog_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= sbwdog_write,
+	.unlocked_ioctl	= sbwdog_ioctl,
+	.open		= sbwdog_open,
+	.release	= sbwdog_release,
+};
+
+static struct miscdevice sbwdog_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &sbwdog_fops,
+};
+
+static struct notifier_block sbwdog_notifier = {
+	.notifier_call	= sbwdog_notify_sys,
+};
+
+/*
+ * interrupt handler
+ *
+ * doesn't do a whole lot for user, but oh so cleverly written so kernel
+ * code can use it to re-up the watchdog, thereby saving the kernel from
+ * having to create and maintain a timer, just to tickle another timer,
+ * which is just so wrong.
+ */
+irqreturn_t sbwdog_interrupt(int irq, void *addr)
+{
+	unsigned long wd_init;
+	char *wd_cfg_reg = (char *)addr;
+	u8 cfg;
+
+	cfg = __raw_readb(wd_cfg_reg);
+	wd_init = __raw_readq(wd_cfg_reg - 8) & 0x7fffff;
+
+	/*
+	 * if it's the second watchdog timer, it's for those users
+	 */
+	if (wd_cfg_reg == user_dog)
+		pr_crit("%s in danger of initiating system reset "
+			"in %ld.%01ld seconds\n",
+			ident.identity,
+			wd_init / 1000000, (wd_init / 100000) % 10);
+	else
+		cfg |= 1;
+
+	__raw_writeb(cfg, wd_cfg_reg);
+
+	return IRQ_HANDLED;
+}
+
+static int __init sbwdog_init(void)
+{
+	int ret;
+
+	/*
+	 * register a reboot notifier
+	 */
+	ret = register_reboot_notifier(&sbwdog_notifier);
+	if (ret) {
+		pr_err("%s: cannot register reboot notifier (err=%d)\n",
+		       ident.identity, ret);
+		return ret;
+	}
+
+	/*
+	 * get the resources
+	 */
+
+	ret = request_irq(1, sbwdog_interrupt, IRQF_SHARED,
+		ident.identity, (void *)user_dog);
+	if (ret) {
+		pr_err("%s: failed to request irq 1 - %d\n",
+		       ident.identity, ret);
+		goto out;
+	}
+
+	ret = misc_register(&sbwdog_miscdev);
+	if (ret == 0) {
+		pr_info("%s: timeout is %ld.%ld secs\n",
+			ident.identity,
+			timeout / 1000000, (timeout / 100000) % 10);
+		return 0;
+	}
+	free_irq(1, (void *)user_dog);
+out:
+	unregister_reboot_notifier(&sbwdog_notifier);
+
+	return ret;
+}
+
+static void __exit sbwdog_exit(void)
+{
+	misc_deregister(&sbwdog_miscdev);
+	free_irq(1, (void *)user_dog);
+	unregister_reboot_notifier(&sbwdog_notifier);
+}
+
+module_init(sbwdog_init);
+module_exit(sbwdog_exit);
+
+MODULE_AUTHOR("Andrew Sharp <andy.sharp@lsi.com>");
+MODULE_DESCRIPTION("SiByte Watchdog");
+
+module_param(timeout, ulong, 0);
+MODULE_PARM_DESC(timeout,
+      "Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)");
+
+MODULE_LICENSE("GPL");
+
+/*
+ * example code that can be put in a platform code area to utilize the
+ * first watchdog timer for the kernels own purpose.
+
+void platform_wd_setup(void)
+{
+	int ret;
+
+	ret = request_irq(1, sbwdog_interrupt, IRQF_SHARED,
+		"Kernel Watchdog", IOADDR(A_SCD_WDOG_CFG_0));
+	if (ret) {
+		pr_crit("Watchdog IRQ zero(0) failed to be requested - %d\n", ret);
+	}
+}
+
+
+ */
diff --git a/drivers/watchdog/sbc60xxwdt.c b/drivers/watchdog/sbc60xxwdt.c
new file mode 100644
index 000000000..1702df7f8
--- /dev/null
+++ b/drivers/watchdog/sbc60xxwdt.c
@@ -0,0 +1,389 @@
+/*
+ *	60xx Single Board Computer Watchdog Timer driver for Linux 2.2.x
+ *
+ *	Based on acquirewdt.c by Alan Cox.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	The author does NOT admit liability nor provide warranty for
+ *	any of this software. This material is provided "AS-IS" in
+ *	the hope that it may be useful for others.
+ *
+ *	(c) Copyright 2000    Jakob Oestergaard <jakob@unthought.net>
+ *
+ *           12/4 - 2000      [Initial revision]
+ *           25/4 - 2000      Added /dev/watchdog support
+ *           09/5 - 2001      [smj@oro.net] fixed fop_write to "return 1"
+ *					on success
+ *           12/4 - 2002      [rob@osinvestor.com] eliminate fop_read
+ *                            fix possible wdt_is_open race
+ *                            add CONFIG_WATCHDOG_NOWAYOUT support
+ *                            remove lock_kernel/unlock_kernel pairs
+ *                            added KERN_* to printk's
+ *                            got rid of extraneous comments
+ *                            changed watchdog_info to correctly reflect what
+ *			      the driver offers
+ *			      added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS,
+ *			      WDIOC_SETTIMEOUT, WDIOC_GETTIMEOUT, and
+ *			      WDIOC_SETOPTIONS ioctls
+ *           09/8 - 2003      [wim@iguana.be] cleanup of trailing spaces
+ *                            use module_param
+ *                            made timeout (the emulated heartbeat) a
+ *			      module_param
+ *                            made the keepalive ping an internal subroutine
+ *                            made wdt_stop and wdt_start module params
+ *                            added extra printk's for startup problems
+ *                            added MODULE_AUTHOR and MODULE_DESCRIPTION info
+ *
+ *
+ *  This WDT driver is different from the other Linux WDT
+ *  drivers in the following ways:
+ *  *)  The driver will ping the watchdog by itself, because this
+ *      particular WDT has a very short timeout (one second) and it
+ *      would be insane to count on any userspace daemon always
+ *      getting scheduled within that time frame.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+
+#define OUR_NAME "sbc60xxwdt"
+#define PFX OUR_NAME ": "
+
+/*
+ * You must set these - The driver cannot probe for the settings
+ */
+
+static int wdt_stop = 0x45;
+module_param(wdt_stop, int, 0);
+MODULE_PARM_DESC(wdt_stop, "SBC60xx WDT 'stop' io port (default 0x45)");
+
+static int wdt_start = 0x443;
+module_param(wdt_start, int, 0);
+MODULE_PARM_DESC(wdt_start, "SBC60xx WDT 'start' io port (default 0x443)");
+
+/*
+ * The 60xx board can use watchdog timeout values from one second
+ * to several minutes.  The default is one second, so if we reset
+ * the watchdog every ~250ms we should be safe.
+ */
+
+#define WDT_INTERVAL (HZ/4+1)
+
+/*
+ * We must not require too good response from the userspace daemon.
+ * Here we require the userspace daemon to send us a heartbeat
+ * char to /dev/watchdog every 30 seconds.
+ * If the daemon pulses us every 25 seconds, we can still afford
+ * a 5 second scheduling delay on the (high priority) daemon. That
+ * should be sufficient for a box under any load.
+ */
+
+#define WATCHDOG_TIMEOUT 30		/* 30 sec default timeout */
+static int timeout = WATCHDOG_TIMEOUT;	/* in seconds, multiplied by HZ to
+					   get seconds to wait for a ping */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. (1<=timeout<=3600, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static void wdt_timer_ping(struct timer_list *);
+static DEFINE_TIMER(timer, wdt_timer_ping);
+static unsigned long next_heartbeat;
+static unsigned long wdt_is_open;
+static char wdt_expect_close;
+
+/*
+ *	Whack the dog
+ */
+
+static void wdt_timer_ping(struct timer_list *unused)
+{
+	/* If we got a heartbeat pulse within the WDT_US_INTERVAL
+	 * we agree to ping the WDT
+	 */
+	if (time_before(jiffies, next_heartbeat)) {
+		/* Ping the WDT by reading from wdt_start */
+		inb_p(wdt_start);
+		/* Re-set the timer interval */
+		mod_timer(&timer, jiffies + WDT_INTERVAL);
+	} else
+		pr_warn("Heartbeat lost! Will not ping the watchdog\n");
+}
+
+/*
+ * Utility routines
+ */
+
+static void wdt_startup(void)
+{
+	next_heartbeat = jiffies + (timeout * HZ);
+
+	/* Start the timer */
+	mod_timer(&timer, jiffies + WDT_INTERVAL);
+	pr_info("Watchdog timer is now enabled\n");
+}
+
+static void wdt_turnoff(void)
+{
+	/* Stop the timer */
+	del_timer_sync(&timer);
+	inb_p(wdt_stop);
+	pr_info("Watchdog timer is now disabled...\n");
+}
+
+static void wdt_keepalive(void)
+{
+	/* user land ping */
+	next_heartbeat = jiffies + (timeout * HZ);
+}
+
+/*
+ * /dev/watchdog handling
+ */
+
+static ssize_t fop_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
+{
+	/* See if we got the magic character 'V' and reload the timer */
+	if (count) {
+		if (!nowayout) {
+			size_t ofs;
+
+			/* note: just in case someone wrote the
+			   magic character five months ago... */
+			wdt_expect_close = 0;
+
+			/* scan to see whether or not we got the
+			   magic character */
+			for (ofs = 0; ofs != count; ofs++) {
+				char c;
+				if (get_user(c, buf + ofs))
+					return -EFAULT;
+				if (c == 'V')
+					wdt_expect_close = 42;
+			}
+		}
+
+		/* Well, anyhow someone wrote to us, we should
+		   return that favour */
+		wdt_keepalive();
+	}
+	return count;
+}
+
+static int fop_open(struct inode *inode, struct file *file)
+{
+	/* Just in case we're already talking to someone... */
+	if (test_and_set_bit(0, &wdt_is_open))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	/* Good, fire up the show */
+	wdt_startup();
+	return nonseekable_open(inode, file);
+}
+
+static int fop_close(struct inode *inode, struct file *file)
+{
+	if (wdt_expect_close == 42)
+		wdt_turnoff();
+	else {
+		del_timer(&timer);
+		pr_crit("device file closed unexpectedly. Will not stop the WDT!\n");
+	}
+	clear_bit(0, &wdt_is_open);
+	wdt_expect_close = 0;
+	return 0;
+}
+
+static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+							WDIOF_MAGICCLOSE,
+		.firmware_version = 1,
+		.identity = "SBC60xx",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+	{
+		int new_options, retval = -EINVAL;
+		if (get_user(new_options, p))
+			return -EFAULT;
+		if (new_options & WDIOS_DISABLECARD) {
+			wdt_turnoff();
+			retval = 0;
+		}
+		if (new_options & WDIOS_ENABLECARD) {
+			wdt_startup();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		/* arbitrary upper limit */
+		if (new_timeout < 1 || new_timeout > 3600)
+			return -EINVAL;
+
+		timeout = new_timeout;
+		wdt_keepalive();
+		/* Fall through */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static const struct file_operations wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= fop_write,
+	.open		= fop_open,
+	.release	= fop_close,
+	.unlocked_ioctl	= fop_ioctl,
+};
+
+static struct miscdevice wdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &wdt_fops,
+};
+
+/*
+ *	Notifier for system down
+ */
+
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
+	void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		wdt_turnoff();
+	return NOTIFY_DONE;
+}
+
+/*
+ *	The WDT needs to learn about soft shutdowns in order to
+ *	turn the timebomb registers off.
+ */
+
+static struct notifier_block wdt_notifier = {
+	.notifier_call = wdt_notify_sys,
+};
+
+static void __exit sbc60xxwdt_unload(void)
+{
+	wdt_turnoff();
+
+	/* Deregister */
+	misc_deregister(&wdt_miscdev);
+
+	unregister_reboot_notifier(&wdt_notifier);
+	if ((wdt_stop != 0x45) && (wdt_stop != wdt_start))
+		release_region(wdt_stop, 1);
+	release_region(wdt_start, 1);
+}
+
+static int __init sbc60xxwdt_init(void)
+{
+	int rc = -EBUSY;
+
+	if (timeout < 1 || timeout > 3600) { /* arbitrary upper limit */
+		timeout = WATCHDOG_TIMEOUT;
+		pr_info("timeout value must be 1 <= x <= 3600, using %d\n",
+			timeout);
+	}
+
+	if (!request_region(wdt_start, 1, "SBC 60XX WDT")) {
+		pr_err("I/O address 0x%04x already in use\n", wdt_start);
+		rc = -EIO;
+		goto err_out;
+	}
+
+	/* We cannot reserve 0x45 - the kernel already has! */
+	if (wdt_stop != 0x45 && wdt_stop != wdt_start) {
+		if (!request_region(wdt_stop, 1, "SBC 60XX WDT")) {
+			pr_err("I/O address 0x%04x already in use\n", wdt_stop);
+			rc = -EIO;
+			goto err_out_region1;
+		}
+	}
+
+	rc = register_reboot_notifier(&wdt_notifier);
+	if (rc) {
+		pr_err("cannot register reboot notifier (err=%d)\n", rc);
+		goto err_out_region2;
+	}
+
+	rc = misc_register(&wdt_miscdev);
+	if (rc) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       wdt_miscdev.minor, rc);
+		goto err_out_reboot;
+	}
+	pr_info("WDT driver for 60XX single board computer initialised. timeout=%d sec (nowayout=%d)\n",
+		timeout, nowayout);
+
+	return 0;
+
+err_out_reboot:
+	unregister_reboot_notifier(&wdt_notifier);
+err_out_region2:
+	if (wdt_stop != 0x45 && wdt_stop != wdt_start)
+		release_region(wdt_stop, 1);
+err_out_region1:
+	release_region(wdt_start, 1);
+err_out:
+	return rc;
+}
+
+module_init(sbc60xxwdt_init);
+module_exit(sbc60xxwdt_unload);
+
+MODULE_AUTHOR("Jakob Oestergaard <jakob@unthought.net>");
+MODULE_DESCRIPTION("60xx Single Board Computer Watchdog Timer driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/sbc7240_wdt.c b/drivers/watchdog/sbc7240_wdt.c
new file mode 100644
index 000000000..5f268add1
--- /dev/null
+++ b/drivers/watchdog/sbc7240_wdt.c
@@ -0,0 +1,311 @@
+/*
+ *	NANO7240 SBC Watchdog device driver
+ *
+ *	Based on w83877f.c by Scott Jennings,
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License version 2 as
+ *	published by the Free Software Foundation;
+ *
+ *	Software distributed under the License is distributed on an "AS IS"
+ *	basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ *	implied. See the License for the specific language governing
+ *	rights and limitations under the License.
+ *
+ *	(c) Copyright 2007  Gilles GIGAN <gilles.gigan@jcu.edu.au>
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/miscdevice.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/atomic.h>
+
+#define SBC7240_ENABLE_PORT		0x443
+#define SBC7240_DISABLE_PORT		0x043
+#define SBC7240_SET_TIMEOUT_PORT	SBC7240_ENABLE_PORT
+#define SBC7240_MAGIC_CHAR		'V'
+
+#define SBC7240_TIMEOUT		30
+#define SBC7240_MAX_TIMEOUT		255
+static int timeout = SBC7240_TIMEOUT;	/* in seconds */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<="
+		 __MODULE_STRING(SBC7240_MAX_TIMEOUT) ", default="
+		 __MODULE_STRING(SBC7240_TIMEOUT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Disable watchdog when closing device file");
+
+#define SBC7240_OPEN_STATUS_BIT		0
+#define SBC7240_ENABLED_STATUS_BIT	1
+#define SBC7240_EXPECT_CLOSE_STATUS_BIT	2
+static unsigned long wdt_status;
+
+/*
+ * Utility routines
+ */
+
+static void wdt_disable(void)
+{
+	/* disable the watchdog */
+	if (test_and_clear_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status)) {
+		inb_p(SBC7240_DISABLE_PORT);
+		pr_info("Watchdog timer is now disabled\n");
+	}
+}
+
+static void wdt_enable(void)
+{
+	/* enable the watchdog */
+	if (!test_and_set_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status)) {
+		inb_p(SBC7240_ENABLE_PORT);
+		pr_info("Watchdog timer is now enabled\n");
+	}
+}
+
+static int wdt_set_timeout(int t)
+{
+	if (t < 1 || t > SBC7240_MAX_TIMEOUT) {
+		pr_err("timeout value must be 1<=x<=%d\n", SBC7240_MAX_TIMEOUT);
+		return -1;
+	}
+	/* set the timeout */
+	outb_p((unsigned)t, SBC7240_SET_TIMEOUT_PORT);
+	timeout = t;
+	pr_info("timeout set to %d seconds\n", t);
+	return 0;
+}
+
+/* Whack the dog */
+static inline void wdt_keepalive(void)
+{
+	if (test_bit(SBC7240_ENABLED_STATUS_BIT, &wdt_status))
+		inb_p(SBC7240_ENABLE_PORT);
+}
+
+/*
+ * /dev/watchdog handling
+ */
+static ssize_t fop_write(struct file *file, const char __user *buf,
+			 size_t count, loff_t *ppos)
+{
+	size_t i;
+	char c;
+
+	if (count) {
+		if (!nowayout) {
+			clear_bit(SBC7240_EXPECT_CLOSE_STATUS_BIT,
+				&wdt_status);
+
+			/* is there a magic char ? */
+			for (i = 0; i != count; i++) {
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == SBC7240_MAGIC_CHAR) {
+					set_bit(SBC7240_EXPECT_CLOSE_STATUS_BIT,
+						&wdt_status);
+					break;
+				}
+			}
+		}
+
+		wdt_keepalive();
+	}
+
+	return count;
+}
+
+static int fop_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(SBC7240_OPEN_STATUS_BIT, &wdt_status))
+		return -EBUSY;
+
+	wdt_enable();
+
+	return nonseekable_open(inode, file);
+}
+
+static int fop_close(struct inode *inode, struct file *file)
+{
+	if (test_and_clear_bit(SBC7240_EXPECT_CLOSE_STATUS_BIT, &wdt_status)
+	    || !nowayout) {
+		wdt_disable();
+	} else {
+		pr_crit("Unexpected close, not stopping watchdog!\n");
+		wdt_keepalive();
+	}
+
+	clear_bit(SBC7240_OPEN_STATUS_BIT, &wdt_status);
+	return 0;
+}
+
+static const struct watchdog_info ident = {
+	.options = WDIOF_KEEPALIVEPING|
+		   WDIOF_SETTIMEOUT|
+		   WDIOF_MAGICCLOSE,
+	.firmware_version = 1,
+	.identity = "SBC7240",
+};
+
+
+static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user((void __user *)arg, &ident, sizeof(ident))
+						 ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, (int __user *)arg);
+	case WDIOC_SETOPTIONS:
+	{
+		int options;
+		int retval = -EINVAL;
+
+		if (get_user(options, (int __user *)arg))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD) {
+			wdt_disable();
+			retval = 0;
+		}
+
+		if (options & WDIOS_ENABLECARD) {
+			wdt_enable();
+			retval = 0;
+		}
+
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
+
+		if (get_user(new_timeout, (int __user *)arg))
+			return -EFAULT;
+
+		if (wdt_set_timeout(new_timeout))
+			return -EINVAL;
+
+		/* Fall through */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, (int __user *)arg);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static const struct file_operations wdt_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = fop_write,
+	.open = fop_open,
+	.release = fop_close,
+	.unlocked_ioctl = fop_ioctl,
+};
+
+static struct miscdevice wdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &wdt_fops,
+};
+
+/*
+ *	Notifier for system down
+ */
+
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
+			  void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		wdt_disable();
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block wdt_notifier = {
+	.notifier_call = wdt_notify_sys,
+};
+
+static void __exit sbc7240_wdt_unload(void)
+{
+	pr_info("Removing watchdog\n");
+	misc_deregister(&wdt_miscdev);
+
+	unregister_reboot_notifier(&wdt_notifier);
+	release_region(SBC7240_ENABLE_PORT, 1);
+}
+
+static int __init sbc7240_wdt_init(void)
+{
+	int rc = -EBUSY;
+
+	if (!request_region(SBC7240_ENABLE_PORT, 1, "SBC7240 WDT")) {
+		pr_err("I/O address 0x%04x already in use\n",
+		       SBC7240_ENABLE_PORT);
+		rc = -EIO;
+		goto err_out;
+	}
+
+	/* The IO port 0x043 used to disable the watchdog
+	 * is already claimed by the system timer, so we
+	 * can't request_region() it ...*/
+
+	if (timeout < 1 || timeout > SBC7240_MAX_TIMEOUT) {
+		timeout = SBC7240_TIMEOUT;
+		pr_info("timeout value must be 1<=x<=%d, using %d\n",
+			SBC7240_MAX_TIMEOUT, timeout);
+	}
+	wdt_set_timeout(timeout);
+	wdt_disable();
+
+	rc = register_reboot_notifier(&wdt_notifier);
+	if (rc) {
+		pr_err("cannot register reboot notifier (err=%d)\n", rc);
+		goto err_out_region;
+	}
+
+	rc = misc_register(&wdt_miscdev);
+	if (rc) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       wdt_miscdev.minor, rc);
+		goto err_out_reboot_notifier;
+	}
+
+	pr_info("Watchdog driver for SBC7240 initialised (nowayout=%d)\n",
+		nowayout);
+
+	return 0;
+
+err_out_reboot_notifier:
+	unregister_reboot_notifier(&wdt_notifier);
+err_out_region:
+	release_region(SBC7240_ENABLE_PORT, 1);
+err_out:
+	return rc;
+}
+
+module_init(sbc7240_wdt_init);
+module_exit(sbc7240_wdt_unload);
+
+MODULE_AUTHOR("Gilles Gigan");
+MODULE_DESCRIPTION("Watchdog device driver for single board"
+		   " computers EPIC Nano 7240 from iEi");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/sbc8360.c b/drivers/watchdog/sbc8360.c
new file mode 100644
index 000000000..da60560ca
--- /dev/null
+++ b/drivers/watchdog/sbc8360.c
@@ -0,0 +1,408 @@
+/*
+ *	SBC8360 Watchdog driver
+ *
+ *	(c) Copyright 2005 Webcon, Inc.
+ *
+ *	Based on ib700wdt.c, which is based on advantechwdt.c which is based
+ *	on acquirewdt.c which is based on wdt.c.
+ *
+ *	(c) Copyright 2001 Charles Howes <chowes@vsol.net>
+ *
+ *	Based on advantechwdt.c which is based on acquirewdt.c which
+ *	is based on wdt.c.
+ *
+ *	(c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
+ *
+ *	Based on acquirewdt.c which is based on wdt.c.
+ *	Original copyright messages:
+ *
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ *	warranty for any of this software. This material is provided
+ *	"AS-IS" and at no charge.
+ *
+ *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ *	14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
+ *	     Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
+ *	     Added timeout module option to override default
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/notifier.h>
+#include <linux/fs.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/moduleparam.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+
+static unsigned long sbc8360_is_open;
+static char expect_close;
+
+/*
+ *
+ * Watchdog Timer Configuration
+ *
+ * The function of the watchdog timer is to reset the system automatically
+ * and is defined at I/O port 0120H and 0121H.  To enable the watchdog timer
+ * and allow the system to reset, write appropriate values from the table
+ * below to I/O port 0120H and 0121H.  To disable the timer, write a zero
+ * value to I/O port 0121H for the system to stop the watchdog function.
+ *
+ * The following describes how the timer should be programmed (according to
+ * the vendor documentation)
+ *
+ * Enabling Watchdog:
+ * MOV AX,000AH (enable, phase I)
+ * MOV DX,0120H
+ * OUT DX,AX
+ * MOV AX,000BH (enable, phase II)
+ * MOV DX,0120H
+ * OUT DX,AX
+ * MOV AX,000nH (set multiplier n, from 1-4)
+ * MOV DX,0120H
+ * OUT DX,AX
+ * MOV AX,000mH (set base timer m, from 0-F)
+ * MOV DX,0121H
+ * OUT DX,AX
+ *
+ * Reset timer:
+ * MOV AX,000mH (same as set base timer, above)
+ * MOV DX,0121H
+ * OUT DX,AX
+ *
+ * Disabling Watchdog:
+ * MOV AX,0000H (a zero value)
+ * MOV DX,0120H
+ * OUT DX,AX
+ *
+ * Watchdog timeout configuration values:
+ *		N
+ *	M |	1	2	3	4
+ *	--|----------------------------------
+ *	0 |	0.5s	5s	50s	100s
+ *	1 |	1s	10s	100s	200s
+ *	2 |	1.5s	15s	150s	300s
+ *	3 |	2s	20s	200s	400s
+ *	4 |	2.5s	25s	250s	500s
+ *	5 |	3s	30s	300s	600s
+ *	6 |	3.5s	35s	350s	700s
+ *	7 |	4s	40s	400s	800s
+ *	8 |	4.5s	45s	450s	900s
+ *	9 |	5s	50s	500s	1000s
+ *	A |	5.5s	55s	550s	1100s
+ *	B |	6s	60s	600s	1200s
+ *	C |	6.5s	65s	650s	1300s
+ *	D |	7s	70s	700s	1400s
+ *	E |	7.5s	75s	750s	1500s
+ *	F |	8s	80s	800s	1600s
+ *
+ * Another way to say the same things is:
+ *  For N=1, Timeout = (M+1) * 0.5s
+ *  For N=2, Timeout = (M+1) * 5s
+ *  For N=3, Timeout = (M+1) * 50s
+ *  For N=4, Timeout = (M+1) * 100s
+ *
+ */
+
+static int wd_times[64][2] = {
+	{0, 1},			/* 0  = 0.5s */
+	{1, 1},			/* 1  = 1s   */
+	{2, 1},			/* 2  = 1.5s */
+	{3, 1},			/* 3  = 2s   */
+	{4, 1},			/* 4  = 2.5s */
+	{5, 1},			/* 5  = 3s   */
+	{6, 1},			/* 6  = 3.5s */
+	{7, 1},			/* 7  = 4s   */
+	{8, 1},			/* 8  = 4.5s */
+	{9, 1},			/* 9  = 5s   */
+	{0xA, 1},		/* 10 = 5.5s */
+	{0xB, 1},		/* 11 = 6s   */
+	{0xC, 1},		/* 12 = 6.5s */
+	{0xD, 1},		/* 13 = 7s   */
+	{0xE, 1},		/* 14 = 7.5s */
+	{0xF, 1},		/* 15 = 8s   */
+	{0, 2},			/* 16 = 5s  */
+	{1, 2},			/* 17 = 10s */
+	{2, 2},			/* 18 = 15s */
+	{3, 2},			/* 19 = 20s */
+	{4, 2},			/* 20 = 25s */
+	{5, 2},			/* 21 = 30s */
+	{6, 2},			/* 22 = 35s */
+	{7, 2},			/* 23 = 40s */
+	{8, 2},			/* 24 = 45s */
+	{9, 2},			/* 25 = 50s */
+	{0xA, 2},		/* 26 = 55s */
+	{0xB, 2},		/* 27 = 60s */
+	{0xC, 2},		/* 28 = 65s */
+	{0xD, 2},		/* 29 = 70s */
+	{0xE, 2},		/* 30 = 75s */
+	{0xF, 2},		/* 31 = 80s */
+	{0, 3},			/* 32 = 50s  */
+	{1, 3},			/* 33 = 100s */
+	{2, 3},			/* 34 = 150s */
+	{3, 3},			/* 35 = 200s */
+	{4, 3},			/* 36 = 250s */
+	{5, 3},			/* 37 = 300s */
+	{6, 3},			/* 38 = 350s */
+	{7, 3},			/* 39 = 400s */
+	{8, 3},			/* 40 = 450s */
+	{9, 3},			/* 41 = 500s */
+	{0xA, 3},		/* 42 = 550s */
+	{0xB, 3},		/* 43 = 600s */
+	{0xC, 3},		/* 44 = 650s */
+	{0xD, 3},		/* 45 = 700s */
+	{0xE, 3},		/* 46 = 750s */
+	{0xF, 3},		/* 47 = 800s */
+	{0, 4},			/* 48 = 100s */
+	{1, 4},			/* 49 = 200s */
+	{2, 4},			/* 50 = 300s */
+	{3, 4},			/* 51 = 400s */
+	{4, 4},			/* 52 = 500s */
+	{5, 4},			/* 53 = 600s */
+	{6, 4},			/* 54 = 700s */
+	{7, 4},			/* 55 = 800s */
+	{8, 4},			/* 56 = 900s */
+	{9, 4},			/* 57 = 1000s */
+	{0xA, 4},		/* 58 = 1100s */
+	{0xB, 4},		/* 59 = 1200s */
+	{0xC, 4},		/* 60 = 1300s */
+	{0xD, 4},		/* 61 = 1400s */
+	{0xE, 4},		/* 62 = 1500s */
+	{0xF, 4}		/* 63 = 1600s */
+};
+
+#define SBC8360_ENABLE 0x120
+#define SBC8360_BASETIME 0x121
+
+static int timeout = 27;
+static int wd_margin = 0xB;
+static int wd_multiplier = 2;
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Index into timeout table (0-63) (default=27 (60s))");
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		 "Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/*
+ *	Kernel methods.
+ */
+
+/* Activate and pre-configure watchdog */
+static void sbc8360_activate(void)
+{
+	/* Enable the watchdog */
+	outb(0x0A, SBC8360_ENABLE);
+	msleep_interruptible(100);
+	outb(0x0B, SBC8360_ENABLE);
+	msleep_interruptible(100);
+	/* Set timeout multiplier */
+	outb(wd_multiplier, SBC8360_ENABLE);
+	msleep_interruptible(100);
+	/* Nothing happens until first sbc8360_ping() */
+}
+
+/* Kernel pings watchdog */
+static void sbc8360_ping(void)
+{
+	/* Write the base timer register */
+	outb(wd_margin, SBC8360_BASETIME);
+}
+
+/* stop watchdog */
+static void sbc8360_stop(void)
+{
+	/* De-activate the watchdog */
+	outb(0, SBC8360_ENABLE);
+}
+
+/* Userspace pings kernel driver, or requests clean close */
+static ssize_t sbc8360_write(struct file *file, const char __user *buf,
+			     size_t count, loff_t *ppos)
+{
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			expect_close = 0;
+
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+		sbc8360_ping();
+	}
+	return count;
+}
+
+static int sbc8360_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &sbc8360_is_open))
+		return -EBUSY;
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	/* Activate and ping once to start the countdown */
+	sbc8360_activate();
+	sbc8360_ping();
+	return nonseekable_open(inode, file);
+}
+
+static int sbc8360_close(struct inode *inode, struct file *file)
+{
+	if (expect_close == 42)
+		sbc8360_stop();
+	else
+		pr_crit("SBC8360 device closed unexpectedly.  SBC8360 will not stop!\n");
+
+	clear_bit(0, &sbc8360_is_open);
+	expect_close = 0;
+	return 0;
+}
+
+/*
+ *	Notifier for system down
+ */
+
+static int sbc8360_notify_sys(struct notifier_block *this, unsigned long code,
+			      void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		sbc8360_stop();	/* Disable the SBC8360 Watchdog */
+
+	return NOTIFY_DONE;
+}
+
+/*
+ *	Kernel Interfaces
+ */
+
+static const struct file_operations sbc8360_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = sbc8360_write,
+	.open = sbc8360_open,
+	.release = sbc8360_close,
+};
+
+static struct miscdevice sbc8360_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &sbc8360_fops,
+};
+
+/*
+ *	The SBC8360 needs to learn about soft shutdowns in order to
+ *	turn the timebomb registers off.
+ */
+
+static struct notifier_block sbc8360_notifier = {
+	.notifier_call = sbc8360_notify_sys,
+};
+
+static int __init sbc8360_init(void)
+{
+	int res;
+	unsigned long int mseconds = 60000;
+
+	if (timeout < 0 || timeout > 63) {
+		pr_err("Invalid timeout index (must be 0-63)\n");
+		res = -EINVAL;
+		goto out;
+	}
+
+	if (!request_region(SBC8360_ENABLE, 1, "SBC8360")) {
+		pr_err("ENABLE method I/O %X is not available\n",
+		       SBC8360_ENABLE);
+		res = -EIO;
+		goto out;
+	}
+	if (!request_region(SBC8360_BASETIME, 1, "SBC8360")) {
+		pr_err("BASETIME method I/O %X is not available\n",
+		       SBC8360_BASETIME);
+		res = -EIO;
+		goto out_nobasetimereg;
+	}
+
+	res = register_reboot_notifier(&sbc8360_notifier);
+	if (res) {
+		pr_err("Failed to register reboot notifier\n");
+		goto out_noreboot;
+	}
+
+	res = misc_register(&sbc8360_miscdev);
+	if (res) {
+		pr_err("failed to register misc device\n");
+		goto out_nomisc;
+	}
+
+	wd_margin = wd_times[timeout][0];
+	wd_multiplier = wd_times[timeout][1];
+
+	if (wd_multiplier == 1)
+		mseconds = (wd_margin + 1) * 500;
+	else if (wd_multiplier == 2)
+		mseconds = (wd_margin + 1) * 5000;
+	else if (wd_multiplier == 3)
+		mseconds = (wd_margin + 1) * 50000;
+	else if (wd_multiplier == 4)
+		mseconds = (wd_margin + 1) * 100000;
+
+	/* My kingdom for the ability to print "0.5 seconds" in the kernel! */
+	pr_info("Timeout set at %ld ms\n", mseconds);
+
+	return 0;
+
+out_nomisc:
+	unregister_reboot_notifier(&sbc8360_notifier);
+out_noreboot:
+	release_region(SBC8360_BASETIME, 1);
+out_nobasetimereg:
+	release_region(SBC8360_ENABLE, 1);
+out:
+	return res;
+}
+
+static void __exit sbc8360_exit(void)
+{
+	misc_deregister(&sbc8360_miscdev);
+	unregister_reboot_notifier(&sbc8360_notifier);
+	release_region(SBC8360_ENABLE, 1);
+	release_region(SBC8360_BASETIME, 1);
+}
+
+module_init(sbc8360_init);
+module_exit(sbc8360_exit);
+
+MODULE_AUTHOR("Ian E. Morgan <imorgan@webcon.ca>");
+MODULE_DESCRIPTION("SBC8360 watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.01");
+
+/* end of sbc8360.c */
diff --git a/drivers/watchdog/sbc_epx_c3.c b/drivers/watchdog/sbc_epx_c3.c
new file mode 100644
index 000000000..a1c502e0d
--- /dev/null
+++ b/drivers/watchdog/sbc_epx_c3.c
@@ -0,0 +1,222 @@
+/*
+ *	SBC EPX C3 0.1	A Hardware Watchdog Device for the Winsystems EPX-C3
+ *	single board computer
+ *
+ *	(c) Copyright 2006 Calin A. Culianu <calin@ajvar.org>, All Rights
+ *	Reserved.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	based on softdog.c by Alan Cox <alan@lxorguk.ukuu.org.uk>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+static int epx_c3_alive;
+
+#define WATCHDOG_TIMEOUT 1		/* 1 sec default timeout */
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+					__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+#define EPXC3_WATCHDOG_CTL_REG 0x1ee /* write 1 to enable, 0 to disable */
+#define EPXC3_WATCHDOG_PET_REG 0x1ef /* write anything to pet once enabled */
+
+static void epx_c3_start(void)
+{
+	outb(1, EPXC3_WATCHDOG_CTL_REG);
+}
+
+static void epx_c3_stop(void)
+{
+
+	outb(0, EPXC3_WATCHDOG_CTL_REG);
+
+	pr_info("Stopped watchdog timer\n");
+}
+
+static void epx_c3_pet(void)
+{
+	outb(1, EPXC3_WATCHDOG_PET_REG);
+}
+
+/*
+ *	Allow only one person to hold it open
+ */
+static int epx_c3_open(struct inode *inode, struct file *file)
+{
+	if (epx_c3_alive)
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	/* Activate timer */
+	epx_c3_start();
+	epx_c3_pet();
+
+	epx_c3_alive = 1;
+	pr_info("Started watchdog timer\n");
+
+	return nonseekable_open(inode, file);
+}
+
+static int epx_c3_release(struct inode *inode, struct file *file)
+{
+	/* Shut off the timer.
+	 * Lock it in if it's a module and we defined ...NOWAYOUT */
+	if (!nowayout)
+		epx_c3_stop();		/* Turn the WDT off */
+
+	epx_c3_alive = 0;
+
+	return 0;
+}
+
+static ssize_t epx_c3_write(struct file *file, const char __user *data,
+			size_t len, loff_t *ppos)
+{
+	/* Refresh the timer. */
+	if (len)
+		epx_c3_pet();
+	return len;
+}
+
+static long epx_c3_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
+{
+	int options, retval = -EINVAL;
+	int __user *argp = (void __user *)arg;
+	static const struct watchdog_info ident = {
+		.options		= WDIOF_KEEPALIVEPING,
+		.firmware_version	= 0,
+		.identity		= "Winsystems EPX-C3 H/W Watchdog",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		return 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, argp);
+	case WDIOC_SETOPTIONS:
+		if (get_user(options, argp))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD) {
+			epx_c3_stop();
+			retval = 0;
+		}
+
+		if (options & WDIOS_ENABLECARD) {
+			epx_c3_start();
+			retval = 0;
+		}
+
+		return retval;
+	case WDIOC_KEEPALIVE:
+		epx_c3_pet();
+		return 0;
+	case WDIOC_GETTIMEOUT:
+		return put_user(WATCHDOG_TIMEOUT, argp);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static int epx_c3_notify_sys(struct notifier_block *this, unsigned long code,
+				void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		epx_c3_stop();		/* Turn the WDT off */
+
+	return NOTIFY_DONE;
+}
+
+static const struct file_operations epx_c3_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= epx_c3_write,
+	.unlocked_ioctl	= epx_c3_ioctl,
+	.open		= epx_c3_open,
+	.release	= epx_c3_release,
+};
+
+static struct miscdevice epx_c3_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &epx_c3_fops,
+};
+
+static struct notifier_block epx_c3_notifier = {
+	.notifier_call = epx_c3_notify_sys,
+};
+
+static int __init watchdog_init(void)
+{
+	int ret;
+
+	if (!request_region(EPXC3_WATCHDOG_CTL_REG, 2, "epxc3_watchdog"))
+		return -EBUSY;
+
+	ret = register_reboot_notifier(&epx_c3_notifier);
+	if (ret) {
+		pr_err("cannot register reboot notifier (err=%d)\n", ret);
+		goto out;
+	}
+
+	ret = misc_register(&epx_c3_miscdev);
+	if (ret) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, ret);
+		unregister_reboot_notifier(&epx_c3_notifier);
+		goto out;
+	}
+
+	pr_info("Hardware Watchdog Timer for Winsystems EPX-C3 SBC: 0.1\n");
+
+	return 0;
+
+out:
+	release_region(EPXC3_WATCHDOG_CTL_REG, 2);
+	return ret;
+}
+
+static void __exit watchdog_exit(void)
+{
+	misc_deregister(&epx_c3_miscdev);
+	unregister_reboot_notifier(&epx_c3_notifier);
+	release_region(EPXC3_WATCHDOG_CTL_REG, 2);
+}
+
+module_init(watchdog_init);
+module_exit(watchdog_exit);
+
+MODULE_AUTHOR("Calin A. Culianu <calin@ajvar.org>");
+MODULE_DESCRIPTION("Hardware Watchdog Device for Winsystems EPX-C3 SBC.  "
+	"Note that there is no way to probe for this device -- "
+	"so only use it if you are *sure* you are running on this specific "
+	"SBC system from Winsystems!  It writes to IO ports 0x1ee and 0x1ef!");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c
new file mode 100644
index 000000000..a517d8bae
--- /dev/null
+++ b/drivers/watchdog/sbc_fitpc2_wdt.c
@@ -0,0 +1,265 @@
+/*
+ * Watchdog driver for SBC-FITPC2 board
+ *
+ * Author: Denis Turischev <denis@compulab.co.il>
+ *
+ * Adapted from the IXP2000 watchdog driver by Deepak Saxena.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME " WATCHDOG: " fmt
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/dmi.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static unsigned int margin = 60;	/* (secs) Default is 1 minute */
+static unsigned long wdt_status;
+static DEFINE_MUTEX(wdt_lock);
+
+#define WDT_IN_USE		0
+#define WDT_OK_TO_CLOSE		1
+
+#define COMMAND_PORT		0x4c
+#define DATA_PORT		0x48
+
+#define IFACE_ON_COMMAND	1
+#define REBOOT_COMMAND		2
+
+#define WATCHDOG_NAME		"SBC-FITPC2 Watchdog"
+
+static void wdt_send_data(unsigned char command, unsigned char data)
+{
+	outb(data, DATA_PORT);
+	msleep(200);
+	outb(command, COMMAND_PORT);
+	msleep(100);
+}
+
+static void wdt_enable(void)
+{
+	mutex_lock(&wdt_lock);
+	wdt_send_data(IFACE_ON_COMMAND, 1);
+	wdt_send_data(REBOOT_COMMAND, margin);
+	mutex_unlock(&wdt_lock);
+}
+
+static void wdt_disable(void)
+{
+	mutex_lock(&wdt_lock);
+	wdt_send_data(IFACE_ON_COMMAND, 0);
+	wdt_send_data(REBOOT_COMMAND, 0);
+	mutex_unlock(&wdt_lock);
+}
+
+static int fitpc2_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
+		return -EBUSY;
+
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+	wdt_enable();
+
+	return nonseekable_open(inode, file);
+}
+
+static ssize_t fitpc2_wdt_write(struct file *file, const char *data,
+						size_t len, loff_t *ppos)
+{
+	size_t i;
+
+	if (!len)
+		return 0;
+
+	if (nowayout) {
+		len = 0;
+		goto out;
+	}
+
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+	for (i = 0; i != len; i++) {
+		char c;
+
+		if (get_user(c, data + i))
+			return -EFAULT;
+
+		if (c == 'V')
+			set_bit(WDT_OK_TO_CLOSE, &wdt_status);
+	}
+
+out:
+	wdt_enable();
+
+	return len;
+}
+
+
+static const struct watchdog_info ident = {
+	.options	= WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
+				WDIOF_KEEPALIVEPING,
+	.identity	= WATCHDOG_NAME,
+};
+
+
+static long fitpc2_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	int ret = -ENOTTY;
+	int time;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = copy_to_user((struct watchdog_info *)arg, &ident,
+				   sizeof(ident)) ? -EFAULT : 0;
+		break;
+
+	case WDIOC_GETSTATUS:
+		ret = put_user(0, (int *)arg);
+		break;
+
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(0, (int *)arg);
+		break;
+
+	case WDIOC_KEEPALIVE:
+		wdt_enable();
+		ret = 0;
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		ret = get_user(time, (int *)arg);
+		if (ret)
+			break;
+
+		if (time < 31 || time > 255) {
+			ret = -EINVAL;
+			break;
+		}
+
+		margin = time;
+		wdt_enable();
+		/* Fall through */
+
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(margin, (int *)arg);
+		break;
+	}
+
+	return ret;
+}
+
+static int fitpc2_wdt_release(struct inode *inode, struct file *file)
+{
+	if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) {
+		wdt_disable();
+		pr_info("Device disabled\n");
+	} else {
+		pr_warn("Device closed unexpectedly - timer will not stop\n");
+		wdt_enable();
+	}
+
+	clear_bit(WDT_IN_USE, &wdt_status);
+	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
+
+	return 0;
+}
+
+
+static const struct file_operations fitpc2_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= fitpc2_wdt_write,
+	.unlocked_ioctl	= fitpc2_wdt_ioctl,
+	.open		= fitpc2_wdt_open,
+	.release	= fitpc2_wdt_release,
+};
+
+static struct miscdevice fitpc2_wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &fitpc2_wdt_fops,
+};
+
+static int __init fitpc2_wdt_init(void)
+{
+	int err;
+	const char *brd_name;
+
+	brd_name = dmi_get_system_info(DMI_BOARD_NAME);
+
+	if (!brd_name || !strstr(brd_name, "SBC-FITPC2"))
+		return -ENODEV;
+
+	pr_info("%s found\n", brd_name);
+
+	if (!request_region(COMMAND_PORT, 1, WATCHDOG_NAME)) {
+		pr_err("I/O address 0x%04x already in use\n", COMMAND_PORT);
+		return -EIO;
+	}
+
+	if (!request_region(DATA_PORT, 1, WATCHDOG_NAME)) {
+		pr_err("I/O address 0x%04x already in use\n", DATA_PORT);
+		err = -EIO;
+		goto err_data_port;
+	}
+
+	if (margin < 31 || margin > 255) {
+		pr_err("margin must be in range 31 - 255 seconds, you tried to set %d\n",
+		       margin);
+		err = -EINVAL;
+		goto err_margin;
+	}
+
+	err = misc_register(&fitpc2_wdt_miscdev);
+	if (err) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, err);
+		goto err_margin;
+	}
+
+	return 0;
+
+err_margin:
+	release_region(DATA_PORT, 1);
+err_data_port:
+	release_region(COMMAND_PORT, 1);
+
+	return err;
+}
+
+static void __exit fitpc2_wdt_exit(void)
+{
+	misc_deregister(&fitpc2_wdt_miscdev);
+	release_region(DATA_PORT, 1);
+	release_region(COMMAND_PORT, 1);
+}
+
+module_init(fitpc2_wdt_init);
+module_exit(fitpc2_wdt_exit);
+
+MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>");
+MODULE_DESCRIPTION("SBC-FITPC2 Watchdog");
+
+module_param(margin, int, 0);
+MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/sbsa_gwdt.c b/drivers/watchdog/sbsa_gwdt.c
new file mode 100644
index 000000000..e8bd9887c
--- /dev/null
+++ b/drivers/watchdog/sbsa_gwdt.c
@@ -0,0 +1,401 @@
+/*
+ * SBSA(Server Base System Architecture) Generic Watchdog driver
+ *
+ * Copyright (c) 2015, Linaro Ltd.
+ * Author: Fu Wei <fu.wei@linaro.org>
+ *         Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
+ *         Al Stone <al.stone@linaro.org>
+ *         Timur Tabi <timur@codeaurora.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * ARM SBSA Generic Watchdog has two stage timeouts:
+ * the first signal (WS0) is for alerting the system by interrupt,
+ * the second one (WS1) is a real hardware reset.
+ * More details about the hardware specification of this device:
+ * ARM DEN0029B - Server Base System Architecture (SBSA)
+ *
+ * This driver can operate ARM SBSA Generic Watchdog as a single stage watchdog
+ * or a two stages watchdog, it's set up by the module parameter "action".
+ * In the single stage mode, when the timeout is reached, your system
+ * will be reset by WS1. The first signal (WS0) is ignored.
+ * In the two stages mode, when the timeout is reached, the first signal (WS0)
+ * will trigger panic. If the system is getting into trouble and cannot be reset
+ * by panic or restart properly by the kdump kernel(if supported), then the
+ * second stage (as long as the first stage) will be reached, system will be
+ * reset by WS1. This function can help administrator to backup the system
+ * context info by panic console output or kdump.
+ *
+ * SBSA GWDT:
+ * if action is 1 (the two stages mode):
+ * |--------WOR-------WS0--------WOR-------WS1
+ * |----timeout-----(panic)----timeout-----reset
+ *
+ * if action is 0 (the single stage mode):
+ * |------WOR-----WS0(ignored)-----WOR------WS1
+ * |--------------timeout-------------------reset
+ *
+ * Note: Since this watchdog timer has two stages, and each stage is determined
+ * by WOR, in the single stage mode, the timeout is (WOR * 2); in the two
+ * stages mode, the timeout is WOR. The maximum timeout in the two stages mode
+ * is half of that in the single stage mode.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+#include <asm/arch_timer.h>
+
+#define DRV_NAME		"sbsa-gwdt"
+#define WATCHDOG_NAME		"SBSA Generic Watchdog"
+
+/* SBSA Generic Watchdog register definitions */
+/* refresh frame */
+#define SBSA_GWDT_WRR		0x000
+
+/* control frame */
+#define SBSA_GWDT_WCS		0x000
+#define SBSA_GWDT_WOR		0x008
+#define SBSA_GWDT_WCV		0x010
+
+/* refresh/control frame */
+#define SBSA_GWDT_W_IIDR	0xfcc
+#define SBSA_GWDT_IDR		0xfd0
+
+/* Watchdog Control and Status Register */
+#define SBSA_GWDT_WCS_EN	BIT(0)
+#define SBSA_GWDT_WCS_WS0	BIT(1)
+#define SBSA_GWDT_WCS_WS1	BIT(2)
+
+/**
+ * struct sbsa_gwdt - Internal representation of the SBSA GWDT
+ * @wdd:		kernel watchdog_device structure
+ * @clk:		store the System Counter clock frequency, in Hz.
+ * @refresh_base:	Virtual address of the watchdog refresh frame
+ * @control_base:	Virtual address of the watchdog control frame
+ */
+struct sbsa_gwdt {
+	struct watchdog_device	wdd;
+	u32			clk;
+	void __iomem		*refresh_base;
+	void __iomem		*control_base;
+};
+
+#define DEFAULT_TIMEOUT		10 /* seconds */
+
+static unsigned int timeout;
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout,
+		 "Watchdog timeout in seconds. (>=0, default="
+		 __MODULE_STRING(DEFAULT_TIMEOUT) ")");
+
+/*
+ * action refers to action taken when watchdog gets WS0
+ * 0 = skip
+ * 1 = panic
+ * defaults to skip (0)
+ */
+static int action;
+module_param(action, int, 0);
+MODULE_PARM_DESC(action, "after watchdog gets WS0 interrupt, do: "
+		 "0 = skip(*)  1 = panic");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, S_IRUGO);
+MODULE_PARM_DESC(nowayout,
+		 "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/*
+ * watchdog operation functions
+ */
+static int sbsa_gwdt_set_timeout(struct watchdog_device *wdd,
+				 unsigned int timeout)
+{
+	struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd);
+
+	wdd->timeout = timeout;
+
+	if (action)
+		writel(gwdt->clk * timeout,
+		       gwdt->control_base + SBSA_GWDT_WOR);
+	else
+		/*
+		 * In the single stage mode, The first signal (WS0) is ignored,
+		 * the timeout is (WOR * 2), so the WOR should be configured
+		 * to half value of timeout.
+		 */
+		writel(gwdt->clk / 2 * timeout,
+		       gwdt->control_base + SBSA_GWDT_WOR);
+
+	return 0;
+}
+
+static unsigned int sbsa_gwdt_get_timeleft(struct watchdog_device *wdd)
+{
+	struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd);
+	u64 timeleft = 0;
+
+	/*
+	 * In the single stage mode, if WS0 is deasserted
+	 * (watchdog is in the first stage),
+	 * timeleft = WOR + (WCV - system counter)
+	 */
+	if (!action &&
+	    !(readl(gwdt->control_base + SBSA_GWDT_WCS) & SBSA_GWDT_WCS_WS0))
+		timeleft += readl(gwdt->control_base + SBSA_GWDT_WOR);
+
+	timeleft += lo_hi_readq(gwdt->control_base + SBSA_GWDT_WCV) -
+		    arch_counter_get_cntvct();
+
+	do_div(timeleft, gwdt->clk);
+
+	return timeleft;
+}
+
+static int sbsa_gwdt_keepalive(struct watchdog_device *wdd)
+{
+	struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd);
+
+	/*
+	 * Writing WRR for an explicit watchdog refresh.
+	 * You can write anyting (like 0).
+	 */
+	writel(0, gwdt->refresh_base + SBSA_GWDT_WRR);
+
+	return 0;
+}
+
+static int sbsa_gwdt_start(struct watchdog_device *wdd)
+{
+	struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd);
+
+	/* writing WCS will cause an explicit watchdog refresh */
+	writel(SBSA_GWDT_WCS_EN, gwdt->control_base + SBSA_GWDT_WCS);
+
+	return 0;
+}
+
+static int sbsa_gwdt_stop(struct watchdog_device *wdd)
+{
+	struct sbsa_gwdt *gwdt = watchdog_get_drvdata(wdd);
+
+	/* Simply write 0 to WCS to clean WCS_EN bit */
+	writel(0, gwdt->control_base + SBSA_GWDT_WCS);
+
+	return 0;
+}
+
+static irqreturn_t sbsa_gwdt_interrupt(int irq, void *dev_id)
+{
+	panic(WATCHDOG_NAME " timeout");
+
+	return IRQ_HANDLED;
+}
+
+static const struct watchdog_info sbsa_gwdt_info = {
+	.identity	= WATCHDOG_NAME,
+	.options	= WDIOF_SETTIMEOUT |
+			  WDIOF_KEEPALIVEPING |
+			  WDIOF_MAGICCLOSE |
+			  WDIOF_CARDRESET,
+};
+
+static const struct watchdog_ops sbsa_gwdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= sbsa_gwdt_start,
+	.stop		= sbsa_gwdt_stop,
+	.ping		= sbsa_gwdt_keepalive,
+	.set_timeout	= sbsa_gwdt_set_timeout,
+	.get_timeleft	= sbsa_gwdt_get_timeleft,
+};
+
+static int sbsa_gwdt_probe(struct platform_device *pdev)
+{
+	void __iomem *rf_base, *cf_base;
+	struct device *dev = &pdev->dev;
+	struct watchdog_device *wdd;
+	struct sbsa_gwdt *gwdt;
+	struct resource *res;
+	int ret, irq;
+	u32 status;
+
+	gwdt = devm_kzalloc(dev, sizeof(*gwdt), GFP_KERNEL);
+	if (!gwdt)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, gwdt);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	cf_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(cf_base))
+		return PTR_ERR(cf_base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	rf_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(rf_base))
+		return PTR_ERR(rf_base);
+
+	/*
+	 * Get the frequency of system counter from the cp15 interface of ARM
+	 * Generic timer. We don't need to check it, because if it returns "0",
+	 * system would panic in very early stage.
+	 */
+	gwdt->clk = arch_timer_get_cntfrq();
+	gwdt->refresh_base = rf_base;
+	gwdt->control_base = cf_base;
+
+	wdd = &gwdt->wdd;
+	wdd->parent = dev;
+	wdd->info = &sbsa_gwdt_info;
+	wdd->ops = &sbsa_gwdt_ops;
+	wdd->min_timeout = 1;
+	wdd->max_hw_heartbeat_ms = U32_MAX / gwdt->clk * 1000;
+	wdd->timeout = DEFAULT_TIMEOUT;
+	watchdog_set_drvdata(wdd, gwdt);
+	watchdog_set_nowayout(wdd, nowayout);
+
+	status = readl(cf_base + SBSA_GWDT_WCS);
+	if (status & SBSA_GWDT_WCS_WS1) {
+		dev_warn(dev, "System reset by WDT.\n");
+		wdd->bootstatus |= WDIOF_CARDRESET;
+	}
+	if (status & SBSA_GWDT_WCS_EN)
+		set_bit(WDOG_HW_RUNNING, &wdd->status);
+
+	if (action) {
+		irq = platform_get_irq(pdev, 0);
+		if (irq < 0) {
+			action = 0;
+			dev_warn(dev, "unable to get ws0 interrupt.\n");
+		} else {
+			/*
+			 * In case there is a pending ws0 interrupt, just ping
+			 * the watchdog before registering the interrupt routine
+			 */
+			writel(0, rf_base + SBSA_GWDT_WRR);
+			if (devm_request_irq(dev, irq, sbsa_gwdt_interrupt, 0,
+					     pdev->name, gwdt)) {
+				action = 0;
+				dev_warn(dev, "unable to request IRQ %d.\n",
+					 irq);
+			}
+		}
+		if (!action)
+			dev_warn(dev, "falling back to single stage mode.\n");
+	}
+	/*
+	 * In the single stage mode, The first signal (WS0) is ignored,
+	 * the timeout is (WOR * 2), so the maximum timeout should be doubled.
+	 */
+	if (!action)
+		wdd->max_hw_heartbeat_ms *= 2;
+
+	watchdog_init_timeout(wdd, timeout, dev);
+	/*
+	 * Update timeout to WOR.
+	 * Because of the explicit watchdog refresh mechanism,
+	 * it's also a ping, if watchdog is enabled.
+	 */
+	sbsa_gwdt_set_timeout(wdd, wdd->timeout);
+
+	ret = watchdog_register_device(wdd);
+	if (ret)
+		return ret;
+
+	dev_info(dev, "Initialized with %ds timeout @ %u Hz, action=%d.%s\n",
+		 wdd->timeout, gwdt->clk, action,
+		 status & SBSA_GWDT_WCS_EN ? " [enabled]" : "");
+
+	return 0;
+}
+
+static void sbsa_gwdt_shutdown(struct platform_device *pdev)
+{
+	struct sbsa_gwdt *gwdt = platform_get_drvdata(pdev);
+
+	sbsa_gwdt_stop(&gwdt->wdd);
+}
+
+static int sbsa_gwdt_remove(struct platform_device *pdev)
+{
+	struct sbsa_gwdt *gwdt = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&gwdt->wdd);
+
+	return 0;
+}
+
+/* Disable watchdog if it is active during suspend */
+static int __maybe_unused sbsa_gwdt_suspend(struct device *dev)
+{
+	struct sbsa_gwdt *gwdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&gwdt->wdd))
+		sbsa_gwdt_stop(&gwdt->wdd);
+
+	return 0;
+}
+
+/* Enable watchdog if necessary */
+static int __maybe_unused sbsa_gwdt_resume(struct device *dev)
+{
+	struct sbsa_gwdt *gwdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&gwdt->wdd))
+		sbsa_gwdt_start(&gwdt->wdd);
+
+	return 0;
+}
+
+static const struct dev_pm_ops sbsa_gwdt_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(sbsa_gwdt_suspend, sbsa_gwdt_resume)
+};
+
+static const struct of_device_id sbsa_gwdt_of_match[] = {
+	{ .compatible = "arm,sbsa-gwdt", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sbsa_gwdt_of_match);
+
+static const struct platform_device_id sbsa_gwdt_pdev_match[] = {
+	{ .name = DRV_NAME, },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, sbsa_gwdt_pdev_match);
+
+static struct platform_driver sbsa_gwdt_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.pm = &sbsa_gwdt_pm_ops,
+		.of_match_table = sbsa_gwdt_of_match,
+	},
+	.probe = sbsa_gwdt_probe,
+	.remove = sbsa_gwdt_remove,
+	.shutdown = sbsa_gwdt_shutdown,
+	.id_table = sbsa_gwdt_pdev_match,
+};
+
+module_platform_driver(sbsa_gwdt_driver);
+
+MODULE_DESCRIPTION("SBSA Generic Watchdog Driver");
+MODULE_AUTHOR("Fu Wei <fu.wei@linaro.org>");
+MODULE_AUTHOR("Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>");
+MODULE_AUTHOR("Al Stone <al.stone@linaro.org>");
+MODULE_AUTHOR("Timur Tabi <timur@codeaurora.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c
new file mode 100644
index 000000000..8e4e2fc13
--- /dev/null
+++ b/drivers/watchdog/sc1200wdt.c
@@ -0,0 +1,479 @@
+/*
+ *	National Semiconductor PC87307/PC97307 (ala SC1200) WDT driver
+ *	(c) Copyright 2002 Zwane Mwaikambo <zwane@commfireservices.com>,
+ *			All Rights Reserved.
+ *	Based on wdt.c and wdt977.c by Alan Cox and Woody Suwalski respectively.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	The author(s) of this software shall not be held liable for damages
+ *	of any nature resulting due to the use of this software. This
+ *	software is provided AS-IS with no warranties.
+ *
+ *	Changelog:
+ *	20020220 Zwane Mwaikambo	Code based on datasheet, no hardware.
+ *	20020221 Zwane Mwaikambo	Cleanups as suggested by Jeff Garzik
+ *					and Alan Cox.
+ *	20020222 Zwane Mwaikambo	Added probing.
+ *	20020225 Zwane Mwaikambo	Added ISAPNP support.
+ *	20020412 Rob Radez		Broke out start/stop functions
+ *		 <rob@osinvestor.com>	Return proper status instead of
+ *					temperature warning
+ *					Add WDIOC_GETBOOTSTATUS and
+ *					WDIOC_SETOPTIONS ioctls
+ *					Fix CONFIG_WATCHDOG_NOWAYOUT
+ *	20020530 Joel Becker		Add Matt Domsch's nowayout module
+ *					option
+ *	20030116 Adam Belay		Updated to the latest pnp code
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/ioport.h>
+#include <linux/spinlock.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/pnp.h>
+#include <linux/fs.h>
+#include <linux/semaphore.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#define SC1200_MODULE_VER	"build 20020303"
+#define SC1200_MODULE_NAME	"sc1200wdt"
+
+#define	MAX_TIMEOUT	255	/* 255 minutes */
+#define PMIR		(io)	/* Power Management Index Register */
+#define PMDR		(io+1)	/* Power Management Data Register */
+
+/* Data Register indexes */
+#define FER1		0x00	/* Function enable register 1 */
+#define FER2		0x01	/* Function enable register 2 */
+#define PMC1		0x02	/* Power Management Ctrl 1 */
+#define PMC2		0x03	/* Power Management Ctrl 2 */
+#define PMC3		0x04	/* Power Management Ctrl 3 */
+#define WDTO		0x05	/* Watchdog timeout register */
+#define	WDCF		0x06	/* Watchdog config register */
+#define WDST		0x07	/* Watchdog status register */
+
+/* WDCF bitfields - which devices assert WDO */
+#define KBC_IRQ		0x01	/* Keyboard Controller */
+#define MSE_IRQ		0x02	/* Mouse */
+#define UART1_IRQ	0x03	/* Serial0 */
+#define UART2_IRQ	0x04	/* Serial1 */
+/* 5 -7 are reserved */
+
+static int timeout = 1;
+static int io = -1;
+static int io_len = 2;		/* for non plug and play */
+static unsigned long open_flag;
+static char expect_close;
+static DEFINE_SPINLOCK(sc1200wdt_lock);	/* io port access serialisation */
+
+#if defined CONFIG_PNP
+static int isapnp = 1;
+static struct pnp_dev *wdt_dev;
+
+module_param(isapnp, int, 0);
+MODULE_PARM_DESC(isapnp,
+	"When set to 0 driver ISA PnP support will be disabled");
+#endif
+
+module_param_hw(io, int, ioport, 0);
+MODULE_PARM_DESC(io, "io port");
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "range is 0-255 minutes, default is 1");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+
+
+/* Read from Data Register */
+static inline void __sc1200wdt_read_data(unsigned char index,
+						unsigned char *data)
+{
+	outb_p(index, PMIR);
+	*data = inb(PMDR);
+}
+
+static void sc1200wdt_read_data(unsigned char index, unsigned char *data)
+{
+	spin_lock(&sc1200wdt_lock);
+	__sc1200wdt_read_data(index, data);
+	spin_unlock(&sc1200wdt_lock);
+}
+
+/* Write to Data Register */
+static inline void __sc1200wdt_write_data(unsigned char index,
+						unsigned char data)
+{
+	outb_p(index, PMIR);
+	outb(data, PMDR);
+}
+
+static inline void sc1200wdt_write_data(unsigned char index,
+						unsigned char data)
+{
+	spin_lock(&sc1200wdt_lock);
+	__sc1200wdt_write_data(index, data);
+	spin_unlock(&sc1200wdt_lock);
+}
+
+
+static void sc1200wdt_start(void)
+{
+	unsigned char reg;
+	spin_lock(&sc1200wdt_lock);
+
+	__sc1200wdt_read_data(WDCF, &reg);
+	/* assert WDO when any of the following interrupts are triggered too */
+	reg |= (KBC_IRQ | MSE_IRQ | UART1_IRQ | UART2_IRQ);
+	__sc1200wdt_write_data(WDCF, reg);
+	/* set the timeout and get the ball rolling */
+	__sc1200wdt_write_data(WDTO, timeout);
+
+	spin_unlock(&sc1200wdt_lock);
+}
+
+static void sc1200wdt_stop(void)
+{
+	sc1200wdt_write_data(WDTO, 0);
+}
+
+/* This returns the status of the WDO signal, inactive high. */
+static inline int sc1200wdt_status(void)
+{
+	unsigned char ret;
+
+	sc1200wdt_read_data(WDST, &ret);
+	/* If the bit is inactive, the watchdog is enabled, so return
+	 * KEEPALIVEPING which is a bit of a kludge because there's nothing
+	 * else for enabled/disabled status
+	 */
+	return (ret & 0x01) ? 0 : WDIOF_KEEPALIVEPING;
+}
+
+static int sc1200wdt_open(struct inode *inode, struct file *file)
+{
+	/* allow one at a time */
+	if (test_and_set_bit(0, &open_flag))
+		return -EBUSY;
+
+	if (timeout > MAX_TIMEOUT)
+		timeout = MAX_TIMEOUT;
+
+	sc1200wdt_start();
+	pr_info("Watchdog enabled, timeout = %d min(s)", timeout);
+
+	return nonseekable_open(inode, file);
+}
+
+
+static long sc1200wdt_ioctl(struct file *file, unsigned int cmd,
+						unsigned long arg)
+{
+	int new_timeout;
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+							WDIOF_MAGICCLOSE,
+		.firmware_version = 0,
+		.identity = "PC87307/PC97307",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		return 0;
+
+	case WDIOC_GETSTATUS:
+		return put_user(sc1200wdt_status(), p);
+
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_SETOPTIONS:
+	{
+		int options, retval = -EINVAL;
+
+		if (get_user(options, p))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD) {
+			sc1200wdt_stop();
+			retval = 0;
+		}
+
+		if (options & WDIOS_ENABLECARD) {
+			sc1200wdt_start();
+			retval = 0;
+		}
+
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		sc1200wdt_write_data(WDTO, timeout);
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		/* the API states this is given in secs */
+		new_timeout /= 60;
+		if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
+			return -EINVAL;
+		timeout = new_timeout;
+		sc1200wdt_write_data(WDTO, timeout);
+		/* fall through and return the new timeout */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout * 60, p);
+
+	default:
+		return -ENOTTY;
+	}
+}
+
+
+static int sc1200wdt_release(struct inode *inode, struct file *file)
+{
+	if (expect_close == 42) {
+		sc1200wdt_stop();
+		pr_info("Watchdog disabled\n");
+	} else {
+		sc1200wdt_write_data(WDTO, timeout);
+		pr_crit("Unexpected close!, timeout = %d min(s)\n", timeout);
+	}
+	clear_bit(0, &open_flag);
+	expect_close = 0;
+
+	return 0;
+}
+
+
+static ssize_t sc1200wdt_write(struct file *file, const char __user *data,
+						size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			expect_close = 0;
+
+			for (i = 0; i != len; i++) {
+				char c;
+
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+
+		sc1200wdt_write_data(WDTO, timeout);
+		return len;
+	}
+
+	return 0;
+}
+
+
+static int sc1200wdt_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		sc1200wdt_stop();
+
+	return NOTIFY_DONE;
+}
+
+
+static struct notifier_block sc1200wdt_notifier = {
+	.notifier_call =	sc1200wdt_notify_sys,
+};
+
+static const struct file_operations sc1200wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= sc1200wdt_write,
+	.unlocked_ioctl = sc1200wdt_ioctl,
+	.open		= sc1200wdt_open,
+	.release	= sc1200wdt_release,
+};
+
+static struct miscdevice sc1200wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &sc1200wdt_fops,
+};
+
+
+static int __init sc1200wdt_probe(void)
+{
+	/* The probe works by reading the PMC3 register's default value of 0x0e
+	 * there is one caveat, if the device disables the parallel port or any
+	 * of the UARTs we won't be able to detect it.
+	 * NB. This could be done with accuracy by reading the SID registers,
+	 * but we don't have access to those io regions.
+	 */
+
+	unsigned char reg;
+
+	sc1200wdt_read_data(PMC3, &reg);
+	reg &= 0x0f;		/* we don't want the UART busy bits */
+	return (reg == 0x0e) ? 0 : -ENODEV;
+}
+
+
+#if defined CONFIG_PNP
+
+static const struct pnp_device_id scl200wdt_pnp_devices[] = {
+	/* National Semiconductor PC87307/PC97307 watchdog component */
+	{.id = "NSC0800", .driver_data = 0},
+	{.id = ""},
+};
+
+static int scl200wdt_pnp_probe(struct pnp_dev *dev,
+					const struct pnp_device_id *dev_id)
+{
+	/* this driver only supports one card at a time */
+	if (wdt_dev || !isapnp)
+		return -EBUSY;
+
+	wdt_dev = dev;
+	io = pnp_port_start(wdt_dev, 0);
+	io_len = pnp_port_len(wdt_dev, 0);
+
+	if (!request_region(io, io_len, SC1200_MODULE_NAME)) {
+		pr_err("Unable to register IO port %#x\n", io);
+		return -EBUSY;
+	}
+
+	pr_info("PnP device found at io port %#x/%d\n", io, io_len);
+	return 0;
+}
+
+static void scl200wdt_pnp_remove(struct pnp_dev *dev)
+{
+	if (wdt_dev) {
+		release_region(io, io_len);
+		wdt_dev = NULL;
+	}
+}
+
+static struct pnp_driver scl200wdt_pnp_driver = {
+	.name		= "scl200wdt",
+	.id_table	= scl200wdt_pnp_devices,
+	.probe		= scl200wdt_pnp_probe,
+	.remove		= scl200wdt_pnp_remove,
+};
+
+#endif /* CONFIG_PNP */
+
+
+static int __init sc1200wdt_init(void)
+{
+	int ret;
+
+	pr_info("%s\n", SC1200_MODULE_VER);
+
+#if defined CONFIG_PNP
+	if (isapnp) {
+		ret = pnp_register_driver(&scl200wdt_pnp_driver);
+		if (ret)
+			goto out_clean;
+	}
+#endif
+
+	if (io == -1) {
+		pr_err("io parameter must be specified\n");
+		ret = -EINVAL;
+		goto out_pnp;
+	}
+
+#if defined CONFIG_PNP
+	/* now that the user has specified an IO port and we haven't detected
+	 * any devices, disable pnp support */
+	if (isapnp)
+		pnp_unregister_driver(&scl200wdt_pnp_driver);
+	isapnp = 0;
+#endif
+
+	if (!request_region(io, io_len, SC1200_MODULE_NAME)) {
+		pr_err("Unable to register IO port %#x\n", io);
+		ret = -EBUSY;
+		goto out_pnp;
+	}
+
+	ret = sc1200wdt_probe();
+	if (ret)
+		goto out_io;
+
+	ret = register_reboot_notifier(&sc1200wdt_notifier);
+	if (ret) {
+		pr_err("Unable to register reboot notifier err = %d\n", ret);
+		goto out_io;
+	}
+
+	ret = misc_register(&sc1200wdt_miscdev);
+	if (ret) {
+		pr_err("Unable to register miscdev on minor %d\n",
+		       WATCHDOG_MINOR);
+		goto out_rbt;
+	}
+
+	/* ret = 0 */
+
+out_clean:
+	return ret;
+
+out_rbt:
+	unregister_reboot_notifier(&sc1200wdt_notifier);
+
+out_io:
+	release_region(io, io_len);
+
+out_pnp:
+#if defined CONFIG_PNP
+	if (isapnp)
+		pnp_unregister_driver(&scl200wdt_pnp_driver);
+#endif
+	goto out_clean;
+}
+
+
+static void __exit sc1200wdt_exit(void)
+{
+	misc_deregister(&sc1200wdt_miscdev);
+	unregister_reboot_notifier(&sc1200wdt_notifier);
+
+#if defined CONFIG_PNP
+	if (isapnp)
+		pnp_unregister_driver(&scl200wdt_pnp_driver);
+	else
+#endif
+	release_region(io, io_len);
+}
+
+module_init(sc1200wdt_init);
+module_exit(sc1200wdt_exit);
+
+MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>");
+MODULE_DESCRIPTION(
+	"Driver for National Semiconductor PC87307/PC97307 watchdog component");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c
new file mode 100644
index 000000000..809ebcaef
--- /dev/null
+++ b/drivers/watchdog/sc520_wdt.c
@@ -0,0 +1,434 @@
+/*
+ *	AMD Elan SC520 processor Watchdog Timer driver
+ *
+ *	Based on acquirewdt.c by Alan Cox,
+ *	     and sbc60xxwdt.c by Jakob Oestergaard <jakob@unthought.net>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	The authors do NOT admit liability nor provide warranty for
+ *	any of this software. This material is provided "AS-IS" in
+ *	the hope that it may be useful for others.
+ *
+ *	(c) Copyright 2001    Scott Jennings <linuxdrivers@oro.net>
+ *           9/27 - 2001      [Initial release]
+ *
+ *	Additional fixes Alan Cox
+ *	-	Fixed formatting
+ *	-	Removed debug printks
+ *	-	Fixed SMP built kernel deadlock
+ *	-	Switched to private locks not lock_kernel
+ *	-	Used ioremap/writew/readw
+ *	-	Added NOWAYOUT support
+ *	4/12 - 2002 Changes by Rob Radez <rob@osinvestor.com>
+ *	-	Change comments
+ *	-	Eliminate fop_llseek
+ *	-	Change CONFIG_WATCHDOG_NOWAYOUT semantics
+ *	-	Add KERN_* tags to printks
+ *	-	fix possible wdt_is_open race
+ *	-	Report proper capabilities in watchdog_info
+ *	-	Add WDIOC_{GETSTATUS, GETBOOTSTATUS, SETTIMEOUT,
+ *		GETTIMEOUT, SETOPTIONS} ioctls
+ *	09/8 - 2003 Changes by Wim Van Sebroeck <wim@iguana.be>
+ *	-	cleanup of trailing spaces
+ *	-	added extra printk's for startup problems
+ *	-	use module_param
+ *	-	made timeout (the emulated heartbeat) a module_param
+ *	-	made the keepalive ping an internal subroutine
+ *	3/27 - 2004 Changes by Sean Young <sean@mess.org>
+ *	-	set MMCR_BASE to 0xfffef000
+ *	-	CBAR does not need to be read
+ *	-	removed debugging printks
+ *
+ *  This WDT driver is different from most other Linux WDT
+ *  drivers in that the driver will ping the watchdog by itself,
+ *  because this particular WDT has a very short timeout (1.6
+ *  seconds) and it would be insane to count on any userspace
+ *  daemon always getting scheduled within that time frame.
+ *
+ *  This driver uses memory mapped IO, and spinlock.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+
+/*
+ * The AMD Elan SC520 timeout value is 492us times a power of 2 (0-7)
+ *
+ *   0: 492us    2: 1.01s    4: 4.03s   6: 16.22s
+ *   1: 503ms    3: 2.01s    5: 8.05s   7: 32.21s
+ *
+ * We will program the SC520 watchdog for a timeout of 2.01s.
+ * If we reset the watchdog every ~250ms we should be safe.
+ */
+
+#define WDT_INTERVAL (HZ/4+1)
+
+/*
+ * We must not require too good response from the userspace daemon.
+ * Here we require the userspace daemon to send us a heartbeat
+ * char to /dev/watchdog every 30 seconds.
+ */
+
+#define WATCHDOG_TIMEOUT 30		/* 30 sec default timeout */
+/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */
+static int timeout = WATCHDOG_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. (1 <= timeout <= 3600, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/*
+ * AMD Elan SC520 - Watchdog Timer Registers
+ */
+#define MMCR_BASE	0xfffef000	/* The default base address */
+#define OFFS_WDTMRCTL	0xCB0	/* Watchdog Timer Control Register */
+
+/* WDT Control Register bit definitions */
+#define WDT_EXP_SEL_01	0x0001	/* [01] Time-out = 496 us (with 33 Mhz clk). */
+#define WDT_EXP_SEL_02	0x0002	/* [02] Time-out = 508 ms (with 33 Mhz clk). */
+#define WDT_EXP_SEL_03	0x0004	/* [03] Time-out = 1.02 s (with 33 Mhz clk). */
+#define WDT_EXP_SEL_04	0x0008	/* [04] Time-out = 2.03 s (with 33 Mhz clk). */
+#define WDT_EXP_SEL_05	0x0010	/* [05] Time-out = 4.07 s (with 33 Mhz clk). */
+#define WDT_EXP_SEL_06	0x0020	/* [06] Time-out = 8.13 s (with 33 Mhz clk). */
+#define WDT_EXP_SEL_07	0x0040	/* [07] Time-out = 16.27s (with 33 Mhz clk). */
+#define WDT_EXP_SEL_08	0x0080	/* [08] Time-out = 32.54s (with 33 Mhz clk). */
+#define WDT_IRQ_FLG	0x1000	/* [12] Interrupt Request Flag */
+#define WDT_WRST_ENB	0x4000	/* [14] Watchdog Timer Reset Enable */
+#define WDT_ENB		0x8000	/* [15] Watchdog Timer Enable */
+
+static __u16 __iomem *wdtmrctl;
+
+static void wdt_timer_ping(struct timer_list *);
+static DEFINE_TIMER(timer, wdt_timer_ping);
+static unsigned long next_heartbeat;
+static unsigned long wdt_is_open;
+static char wdt_expect_close;
+static DEFINE_SPINLOCK(wdt_spinlock);
+
+/*
+ *	Whack the dog
+ */
+
+static void wdt_timer_ping(struct timer_list *unused)
+{
+	/* If we got a heartbeat pulse within the WDT_US_INTERVAL
+	 * we agree to ping the WDT
+	 */
+	if (time_before(jiffies, next_heartbeat)) {
+		/* Ping the WDT */
+		spin_lock(&wdt_spinlock);
+		writew(0xAAAA, wdtmrctl);
+		writew(0x5555, wdtmrctl);
+		spin_unlock(&wdt_spinlock);
+
+		/* Re-set the timer interval */
+		mod_timer(&timer, jiffies + WDT_INTERVAL);
+	} else
+		pr_warn("Heartbeat lost! Will not ping the watchdog\n");
+}
+
+/*
+ *	Utility routines
+ */
+
+static void wdt_config(int writeval)
+{
+	unsigned long flags;
+
+	/* buy some time (ping) */
+	spin_lock_irqsave(&wdt_spinlock, flags);
+	readw(wdtmrctl);	/* ensure write synchronization */
+	writew(0xAAAA, wdtmrctl);
+	writew(0x5555, wdtmrctl);
+	/* unlock WDT = make WDT configuration register writable one time */
+	writew(0x3333, wdtmrctl);
+	writew(0xCCCC, wdtmrctl);
+	/* write WDT configuration register */
+	writew(writeval, wdtmrctl);
+	spin_unlock_irqrestore(&wdt_spinlock, flags);
+}
+
+static int wdt_startup(void)
+{
+	next_heartbeat = jiffies + (timeout * HZ);
+
+	/* Start the timer */
+	mod_timer(&timer, jiffies + WDT_INTERVAL);
+
+	/* Start the watchdog */
+	wdt_config(WDT_ENB | WDT_WRST_ENB | WDT_EXP_SEL_04);
+
+	pr_info("Watchdog timer is now enabled\n");
+	return 0;
+}
+
+static int wdt_turnoff(void)
+{
+	/* Stop the timer */
+	del_timer_sync(&timer);
+
+	/* Stop the watchdog */
+	wdt_config(0);
+
+	pr_info("Watchdog timer is now disabled...\n");
+	return 0;
+}
+
+static int wdt_keepalive(void)
+{
+	/* user land ping */
+	next_heartbeat = jiffies + (timeout * HZ);
+	return 0;
+}
+
+static int wdt_set_heartbeat(int t)
+{
+	if ((t < 1) || (t > 3600))	/* arbitrary upper limit */
+		return -EINVAL;
+
+	timeout = t;
+	return 0;
+}
+
+/*
+ *	/dev/watchdog handling
+ */
+
+static ssize_t fop_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
+{
+	/* See if we got the magic character 'V' and reload the timer */
+	if (count) {
+		if (!nowayout) {
+			size_t ofs;
+
+			/* note: just in case someone wrote the magic character
+			 * five months ago... */
+			wdt_expect_close = 0;
+
+			/* now scan */
+			for (ofs = 0; ofs != count; ofs++) {
+				char c;
+				if (get_user(c, buf + ofs))
+					return -EFAULT;
+				if (c == 'V')
+					wdt_expect_close = 42;
+			}
+		}
+
+		/* Well, anyhow someone wrote to us, we should
+		   return that favour */
+		wdt_keepalive();
+	}
+	return count;
+}
+
+static int fop_open(struct inode *inode, struct file *file)
+{
+	/* Just in case we're already talking to someone... */
+	if (test_and_set_bit(0, &wdt_is_open))
+		return -EBUSY;
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	/* Good, fire up the show */
+	wdt_startup();
+	return nonseekable_open(inode, file);
+}
+
+static int fop_close(struct inode *inode, struct file *file)
+{
+	if (wdt_expect_close == 42)
+		wdt_turnoff();
+	else {
+		pr_crit("Unexpected close, not stopping watchdog!\n");
+		wdt_keepalive();
+	}
+	clear_bit(0, &wdt_is_open);
+	wdt_expect_close = 0;
+	return 0;
+}
+
+static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
+							| WDIOF_MAGICCLOSE,
+		.firmware_version = 1,
+		.identity = "SC520",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+	{
+		int new_options, retval = -EINVAL;
+
+		if (get_user(new_options, p))
+			return -EFAULT;
+
+		if (new_options & WDIOS_DISABLECARD) {
+			wdt_turnoff();
+			retval = 0;
+		}
+
+		if (new_options & WDIOS_ENABLECARD) {
+			wdt_startup();
+			retval = 0;
+		}
+
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
+
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+
+		if (wdt_set_heartbeat(new_timeout))
+			return -EINVAL;
+
+		wdt_keepalive();
+		/* Fall through */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static const struct file_operations wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= fop_write,
+	.open		= fop_open,
+	.release	= fop_close,
+	.unlocked_ioctl	= fop_ioctl,
+};
+
+static struct miscdevice wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &wdt_fops,
+};
+
+/*
+ *	Notifier for system down
+ */
+
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
+	void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		wdt_turnoff();
+	return NOTIFY_DONE;
+}
+
+/*
+ *	The WDT needs to learn about soft shutdowns in order to
+ *	turn the timebomb registers off.
+ */
+
+static struct notifier_block wdt_notifier = {
+	.notifier_call = wdt_notify_sys,
+};
+
+static void __exit sc520_wdt_unload(void)
+{
+	if (!nowayout)
+		wdt_turnoff();
+
+	/* Deregister */
+	misc_deregister(&wdt_miscdev);
+	unregister_reboot_notifier(&wdt_notifier);
+	iounmap(wdtmrctl);
+}
+
+static int __init sc520_wdt_init(void)
+{
+	int rc = -EBUSY;
+
+	/* Check that the timeout value is within it's range ;
+	   if not reset to the default */
+	if (wdt_set_heartbeat(timeout)) {
+		wdt_set_heartbeat(WATCHDOG_TIMEOUT);
+		pr_info("timeout value must be 1 <= timeout <= 3600, using %d\n",
+			WATCHDOG_TIMEOUT);
+	}
+
+	wdtmrctl = ioremap(MMCR_BASE + OFFS_WDTMRCTL, 2);
+	if (!wdtmrctl) {
+		pr_err("Unable to remap memory\n");
+		rc = -ENOMEM;
+		goto err_out_region2;
+	}
+
+	rc = register_reboot_notifier(&wdt_notifier);
+	if (rc) {
+		pr_err("cannot register reboot notifier (err=%d)\n", rc);
+		goto err_out_ioremap;
+	}
+
+	rc = misc_register(&wdt_miscdev);
+	if (rc) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, rc);
+		goto err_out_notifier;
+	}
+
+	pr_info("WDT driver for SC520 initialised. timeout=%d sec (nowayout=%d)\n",
+		timeout, nowayout);
+
+	return 0;
+
+err_out_notifier:
+	unregister_reboot_notifier(&wdt_notifier);
+err_out_ioremap:
+	iounmap(wdtmrctl);
+err_out_region2:
+	return rc;
+}
+
+module_init(sc520_wdt_init);
+module_exit(sc520_wdt_unload);
+
+MODULE_AUTHOR("Scott and Bill Jennings");
+MODULE_DESCRIPTION(
+	"Driver for watchdog timer in AMD \"Elan\" SC520 uProcessor");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/sch311x_wdt.c b/drivers/watchdog/sch311x_wdt.c
new file mode 100644
index 000000000..814cdf539
--- /dev/null
+++ b/drivers/watchdog/sch311x_wdt.c
@@ -0,0 +1,545 @@
+/*
+ *	sch311x_wdt.c - Driver for the SCH311x Super-I/O chips
+ *			integrated watchdog.
+ *
+ *	(c) Copyright 2008 Wim Van Sebroeck <wim@iguana.be>.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
+ *	provide warranty for any of this software. This material is
+ *	provided "AS-IS" and at no charge.
+ */
+
+/*
+ *	Includes, defines, variables, module parameters, ...
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+/* Includes */
+#include <linux/module.h>		/* For module specific items */
+#include <linux/moduleparam.h>		/* For new moduleparam's */
+#include <linux/types.h>		/* For standard types (like size_t) */
+#include <linux/errno.h>		/* For the -ENODEV/... values */
+#include <linux/kernel.h>		/* For printk/... */
+#include <linux/miscdevice.h>		/* For struct miscdevice */
+#include <linux/watchdog.h>		/* For the watchdog specific items */
+#include <linux/init.h>			/* For __init/__exit/... */
+#include <linux/fs.h>			/* For file operations */
+#include <linux/platform_device.h>	/* For platform_driver framework */
+#include <linux/ioport.h>		/* For io-port access */
+#include <linux/spinlock.h>		/* For spin_lock/spin_unlock/... */
+#include <linux/uaccess.h>		/* For copy_to_user/put_user/... */
+#include <linux/io.h>			/* For inb/outb/... */
+
+/* Module and version information */
+#define DRV_NAME	"sch311x_wdt"
+
+/* Runtime registers */
+#define GP60			0x47
+#define WDT_TIME_OUT		0x65
+#define WDT_VAL			0x66
+#define WDT_CFG			0x67
+#define WDT_CTRL		0x68
+
+/* internal variables */
+static unsigned long sch311x_wdt_is_open;
+static char sch311x_wdt_expect_close;
+static struct platform_device *sch311x_wdt_pdev;
+
+static int sch311x_ioports[] = { 0x2e, 0x4e, 0x162e, 0x164e, 0x00 };
+
+static struct {	/* The devices private data */
+	/* the Runtime Register base address */
+	unsigned short runtime_reg;
+	/* The card's boot status */
+	int boot_status;
+	/* the lock for io operations */
+	spinlock_t io_lock;
+} sch311x_wdt_data;
+
+/* Module load parameters */
+static unsigned short force_id;
+module_param(force_id, ushort, 0);
+MODULE_PARM_DESC(force_id, "Override the detected device ID");
+
+#define WATCHDOG_TIMEOUT 60		/* 60 sec default timeout */
+static int timeout = WATCHDOG_TIMEOUT;	/* in seconds */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. 1<= timeout <=15300, default="
+		__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/*
+ *	Super-IO functions
+ */
+
+static inline void sch311x_sio_enter(int sio_config_port)
+{
+	outb(0x55, sio_config_port);
+}
+
+static inline void sch311x_sio_exit(int sio_config_port)
+{
+	outb(0xaa, sio_config_port);
+}
+
+static inline int sch311x_sio_inb(int sio_config_port, int reg)
+{
+	outb(reg, sio_config_port);
+	return inb(sio_config_port + 1);
+}
+
+static inline void sch311x_sio_outb(int sio_config_port, int reg, int val)
+{
+	outb(reg, sio_config_port);
+	outb(val, sio_config_port + 1);
+}
+
+/*
+ *	Watchdog Operations
+ */
+
+static void sch311x_wdt_set_timeout(int t)
+{
+	unsigned char timeout_unit = 0x80;
+
+	/* When new timeout is bigger then 255 seconds, we will use minutes */
+	if (t > 255) {
+		timeout_unit = 0;
+		t /= 60;
+	}
+
+	/* -- Watchdog Timeout --
+	 * Bit 0-6 (Reserved)
+	 * Bit 7   WDT Time-out Value Units Select
+	 *         (0 = Minutes, 1 = Seconds)
+	 */
+	outb(timeout_unit, sch311x_wdt_data.runtime_reg + WDT_TIME_OUT);
+
+	/* -- Watchdog Timer Time-out Value --
+	 * Bit 0-7 Binary coded units (0=Disabled, 1..255)
+	 */
+	outb(t, sch311x_wdt_data.runtime_reg + WDT_VAL);
+}
+
+static void sch311x_wdt_start(void)
+{
+	unsigned char t;
+
+	spin_lock(&sch311x_wdt_data.io_lock);
+
+	/* set watchdog's timeout */
+	sch311x_wdt_set_timeout(timeout);
+	/* enable the watchdog */
+	/* -- General Purpose I/O Bit 6.0 --
+	 * Bit 0,   In/Out: 0 = Output, 1 = Input
+	 * Bit 1,   Polarity: 0 = No Invert, 1 = Invert
+	 * Bit 2-3, Function select: 00 = GPI/O, 01 = LED1, 11 = WDT,
+	 *                           10 = Either Edge Triggered Intr.4
+	 * Bit 4-6  (Reserved)
+	 * Bit 7,   Output Type: 0 = Push Pull Bit, 1 = Open Drain
+	 */
+	t = inb(sch311x_wdt_data.runtime_reg + GP60);
+	outb((t & ~0x0d) | 0x0c, sch311x_wdt_data.runtime_reg + GP60);
+
+	spin_unlock(&sch311x_wdt_data.io_lock);
+
+}
+
+static void sch311x_wdt_stop(void)
+{
+	unsigned char t;
+
+	spin_lock(&sch311x_wdt_data.io_lock);
+
+	/* stop the watchdog */
+	t = inb(sch311x_wdt_data.runtime_reg + GP60);
+	outb((t & ~0x0d) | 0x01, sch311x_wdt_data.runtime_reg + GP60);
+	/* disable timeout by setting it to 0 */
+	sch311x_wdt_set_timeout(0);
+
+	spin_unlock(&sch311x_wdt_data.io_lock);
+}
+
+static void sch311x_wdt_keepalive(void)
+{
+	spin_lock(&sch311x_wdt_data.io_lock);
+	sch311x_wdt_set_timeout(timeout);
+	spin_unlock(&sch311x_wdt_data.io_lock);
+}
+
+static int sch311x_wdt_set_heartbeat(int t)
+{
+	if (t < 1 || t > (255*60))
+		return -EINVAL;
+
+	/* When new timeout is bigger then 255 seconds,
+	 * we will round up to minutes (with a max of 255) */
+	if (t > 255)
+		t = (((t - 1) / 60) + 1) * 60;
+
+	timeout = t;
+	return 0;
+}
+
+static void sch311x_wdt_get_status(int *status)
+{
+	unsigned char new_status;
+
+	*status = 0;
+
+	spin_lock(&sch311x_wdt_data.io_lock);
+
+	/* -- Watchdog timer control --
+	 * Bit 0   Status Bit: 0 = Timer counting, 1 = Timeout occurred
+	 * Bit 1   Reserved
+	 * Bit 2   Force Timeout: 1 = Forces WD timeout event (self-cleaning)
+	 * Bit 3   P20 Force Timeout enabled:
+	 *          0 = P20 activity does not generate the WD timeout event
+	 *          1 = P20 Allows rising edge of P20, from the keyboard
+	 *              controller, to force the WD timeout event.
+	 * Bit 4-7 Reserved
+	 */
+	new_status = inb(sch311x_wdt_data.runtime_reg + WDT_CTRL);
+	if (new_status & 0x01)
+		*status |= WDIOF_CARDRESET;
+
+	spin_unlock(&sch311x_wdt_data.io_lock);
+}
+
+/*
+ *	/dev/watchdog handling
+ */
+
+static ssize_t sch311x_wdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
+{
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+
+			sch311x_wdt_expect_close = 0;
+
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					sch311x_wdt_expect_close = 42;
+			}
+		}
+		sch311x_wdt_keepalive();
+	}
+	return count;
+}
+
+static long sch311x_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	int status;
+	int new_timeout;
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static const struct watchdog_info ident = {
+		.options		= WDIOF_KEEPALIVEPING |
+					  WDIOF_SETTIMEOUT |
+					  WDIOF_MAGICCLOSE,
+		.firmware_version	= 1,
+		.identity		= DRV_NAME,
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+
+	case WDIOC_GETSTATUS:
+	{
+		sch311x_wdt_get_status(&status);
+		return put_user(status, p);
+	}
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(sch311x_wdt_data.boot_status, p);
+
+	case WDIOC_SETOPTIONS:
+	{
+		int options, retval = -EINVAL;
+
+		if (get_user(options, p))
+			return -EFAULT;
+		if (options & WDIOS_DISABLECARD) {
+			sch311x_wdt_stop();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			sch311x_wdt_start();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		sch311x_wdt_keepalive();
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		if (sch311x_wdt_set_heartbeat(new_timeout))
+			return -EINVAL;
+		sch311x_wdt_keepalive();
+		/* Fall through */
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+static int sch311x_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &sch311x_wdt_is_open))
+		return -EBUSY;
+	/*
+	 *	Activate
+	 */
+	sch311x_wdt_start();
+	return nonseekable_open(inode, file);
+}
+
+static int sch311x_wdt_close(struct inode *inode, struct file *file)
+{
+	if (sch311x_wdt_expect_close == 42) {
+		sch311x_wdt_stop();
+	} else {
+		pr_crit("Unexpected close, not stopping watchdog!\n");
+		sch311x_wdt_keepalive();
+	}
+	clear_bit(0, &sch311x_wdt_is_open);
+	sch311x_wdt_expect_close = 0;
+	return 0;
+}
+
+/*
+ *	Kernel Interfaces
+ */
+
+static const struct file_operations sch311x_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= sch311x_wdt_write,
+	.unlocked_ioctl	= sch311x_wdt_ioctl,
+	.open		= sch311x_wdt_open,
+	.release	= sch311x_wdt_close,
+};
+
+static struct miscdevice sch311x_wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &sch311x_wdt_fops,
+};
+
+/*
+ *	Init & exit routines
+ */
+
+static int sch311x_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int err;
+
+	spin_lock_init(&sch311x_wdt_data.io_lock);
+
+	if (!request_region(sch311x_wdt_data.runtime_reg + GP60, 1, DRV_NAME)) {
+		dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n",
+			sch311x_wdt_data.runtime_reg + GP60,
+			sch311x_wdt_data.runtime_reg + GP60);
+		err = -EBUSY;
+		goto exit;
+	}
+
+	if (!request_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4,
+								DRV_NAME)) {
+		dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n",
+			sch311x_wdt_data.runtime_reg + WDT_TIME_OUT,
+			sch311x_wdt_data.runtime_reg + WDT_CTRL);
+		err = -EBUSY;
+		goto exit_release_region;
+	}
+
+	/* Make sure that the watchdog is not running */
+	sch311x_wdt_stop();
+
+	/* Disable keyboard and mouse interaction and interrupt */
+	/* -- Watchdog timer configuration --
+	 * Bit 0   Reserved
+	 * Bit 1   Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr.
+	 * Bit 2   Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr
+	 * Bit 3   Reserved
+	 * Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled,
+	 *            0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15)
+	 */
+	outb(0, sch311x_wdt_data.runtime_reg + WDT_CFG);
+
+	/* Check that the heartbeat value is within it's range ;
+	 * if not reset to the default */
+	if (sch311x_wdt_set_heartbeat(timeout)) {
+		sch311x_wdt_set_heartbeat(WATCHDOG_TIMEOUT);
+		dev_info(dev, "timeout value must be 1<=x<=15300, using %d\n",
+			timeout);
+	}
+
+	/* Get status at boot */
+	sch311x_wdt_get_status(&sch311x_wdt_data.boot_status);
+
+	sch311x_wdt_miscdev.parent = dev;
+
+	err = misc_register(&sch311x_wdt_miscdev);
+	if (err != 0) {
+		dev_err(dev, "cannot register miscdev on minor=%d (err=%d)\n",
+							WATCHDOG_MINOR, err);
+		goto exit_release_region2;
+	}
+
+	dev_info(dev,
+		"SMSC SCH311x WDT initialized. timeout=%d sec (nowayout=%d)\n",
+		timeout, nowayout);
+
+	return 0;
+
+exit_release_region2:
+	release_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4);
+exit_release_region:
+	release_region(sch311x_wdt_data.runtime_reg + GP60, 1);
+	sch311x_wdt_data.runtime_reg = 0;
+exit:
+	return err;
+}
+
+static int sch311x_wdt_remove(struct platform_device *pdev)
+{
+	/* Stop the timer before we leave */
+	if (!nowayout)
+		sch311x_wdt_stop();
+
+	/* Deregister */
+	misc_deregister(&sch311x_wdt_miscdev);
+	release_region(sch311x_wdt_data.runtime_reg + WDT_TIME_OUT, 4);
+	release_region(sch311x_wdt_data.runtime_reg + GP60, 1);
+	sch311x_wdt_data.runtime_reg = 0;
+	return 0;
+}
+
+static void sch311x_wdt_shutdown(struct platform_device *dev)
+{
+	/* Turn the WDT off if we have a soft shutdown */
+	sch311x_wdt_stop();
+}
+
+static struct platform_driver sch311x_wdt_driver = {
+	.probe		= sch311x_wdt_probe,
+	.remove		= sch311x_wdt_remove,
+	.shutdown	= sch311x_wdt_shutdown,
+	.driver		= {
+		.name = DRV_NAME,
+	},
+};
+
+static int __init sch311x_detect(int sio_config_port, unsigned short *addr)
+{
+	int err = 0, reg;
+	unsigned short base_addr;
+	unsigned char dev_id;
+
+	sch311x_sio_enter(sio_config_port);
+
+	/* Check device ID. We currently know about:
+	 * SCH3112 (0x7c), SCH3114 (0x7d), and SCH3116 (0x7f). */
+	reg = force_id ? force_id : sch311x_sio_inb(sio_config_port, 0x20);
+	if (!(reg == 0x7c || reg == 0x7d || reg == 0x7f)) {
+		err = -ENODEV;
+		goto exit;
+	}
+	dev_id = reg == 0x7c ? 2 : reg == 0x7d ? 4 : 6;
+
+	/* Select logical device A (runtime registers) */
+	sch311x_sio_outb(sio_config_port, 0x07, 0x0a);
+
+	/* Check if Logical Device Register is currently active */
+	if ((sch311x_sio_inb(sio_config_port, 0x30) & 0x01) == 0)
+		pr_info("Seems that LDN 0x0a is not active...\n");
+
+	/* Get the base address of the runtime registers */
+	base_addr = (sch311x_sio_inb(sio_config_port, 0x60) << 8) |
+			   sch311x_sio_inb(sio_config_port, 0x61);
+	if (!base_addr) {
+		pr_err("Base address not set\n");
+		err = -ENODEV;
+		goto exit;
+	}
+	*addr = base_addr;
+
+	pr_info("Found an SMSC SCH311%d chip at 0x%04x\n", dev_id, base_addr);
+
+exit:
+	sch311x_sio_exit(sio_config_port);
+	return err;
+}
+
+static int __init sch311x_wdt_init(void)
+{
+	int err, i, found = 0;
+	unsigned short addr = 0;
+
+	for (i = 0; !found && sch311x_ioports[i]; i++)
+		if (sch311x_detect(sch311x_ioports[i], &addr) == 0)
+			found++;
+
+	if (!found)
+		return -ENODEV;
+
+	sch311x_wdt_data.runtime_reg = addr;
+
+	err = platform_driver_register(&sch311x_wdt_driver);
+	if (err)
+		return err;
+
+	sch311x_wdt_pdev = platform_device_register_simple(DRV_NAME, addr,
+								NULL, 0);
+
+	if (IS_ERR(sch311x_wdt_pdev)) {
+		err = PTR_ERR(sch311x_wdt_pdev);
+		goto unreg_platform_driver;
+	}
+
+	return 0;
+
+unreg_platform_driver:
+	platform_driver_unregister(&sch311x_wdt_driver);
+	return err;
+}
+
+static void __exit sch311x_wdt_exit(void)
+{
+	platform_device_unregister(sch311x_wdt_pdev);
+	platform_driver_unregister(&sch311x_wdt_driver);
+}
+
+module_init(sch311x_wdt_init);
+module_exit(sch311x_wdt_exit);
+
+MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>");
+MODULE_DESCRIPTION("SMSC SCH311x WatchDog Timer Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/scx200_wdt.c b/drivers/watchdog/scx200_wdt.c
new file mode 100644
index 000000000..836377cf9
--- /dev/null
+++ b/drivers/watchdog/scx200_wdt.c
@@ -0,0 +1,271 @@
+/* drivers/char/watchdog/scx200_wdt.c
+
+   National Semiconductor SCx200 Watchdog support
+
+   Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
+
+   Some code taken from:
+   National Semiconductor PC87307/PC97307 (ala SC1200) WDT driver
+   (c) Copyright 2002 Zwane Mwaikambo <zwane@commfireservices.com>
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The author(s) of this software shall not be held liable for damages
+   of any nature resulting due to the use of this software. This
+   software is provided AS-IS with no warranties. */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/scx200.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+#define DEBUG
+
+MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>");
+MODULE_DESCRIPTION("NatSemi SCx200 Watchdog Driver");
+MODULE_LICENSE("GPL");
+
+static int margin = 60;		/* in seconds */
+module_param(margin, int, 0);
+MODULE_PARM_DESC(margin, "Watchdog margin in seconds");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
+
+static u16 wdto_restart;
+static char expect_close;
+static unsigned long open_lock;
+static DEFINE_SPINLOCK(scx_lock);
+
+/* Bits of the WDCNFG register */
+#define W_ENABLE 0x00fa		/* Enable watchdog */
+#define W_DISABLE 0x0000	/* Disable watchdog */
+
+/* The scaling factor for the timer, this depends on the value of W_ENABLE */
+#define W_SCALE (32768/1024)
+
+static void scx200_wdt_ping(void)
+{
+	spin_lock(&scx_lock);
+	outw(wdto_restart, scx200_cb_base + SCx200_WDT_WDTO);
+	spin_unlock(&scx_lock);
+}
+
+static void scx200_wdt_update_margin(void)
+{
+	pr_info("timer margin %d seconds\n", margin);
+	wdto_restart = margin * W_SCALE;
+}
+
+static void scx200_wdt_enable(void)
+{
+	pr_debug("enabling watchdog timer, wdto_restart = %d\n", wdto_restart);
+
+	spin_lock(&scx_lock);
+	outw(0, scx200_cb_base + SCx200_WDT_WDTO);
+	outb(SCx200_WDT_WDSTS_WDOVF, scx200_cb_base + SCx200_WDT_WDSTS);
+	outw(W_ENABLE, scx200_cb_base + SCx200_WDT_WDCNFG);
+	spin_unlock(&scx_lock);
+
+	scx200_wdt_ping();
+}
+
+static void scx200_wdt_disable(void)
+{
+	pr_debug("disabling watchdog timer\n");
+
+	spin_lock(&scx_lock);
+	outw(0, scx200_cb_base + SCx200_WDT_WDTO);
+	outb(SCx200_WDT_WDSTS_WDOVF, scx200_cb_base + SCx200_WDT_WDSTS);
+	outw(W_DISABLE, scx200_cb_base + SCx200_WDT_WDCNFG);
+	spin_unlock(&scx_lock);
+}
+
+static int scx200_wdt_open(struct inode *inode, struct file *file)
+{
+	/* only allow one at a time */
+	if (test_and_set_bit(0, &open_lock))
+		return -EBUSY;
+	scx200_wdt_enable();
+
+	return nonseekable_open(inode, file);
+}
+
+static int scx200_wdt_release(struct inode *inode, struct file *file)
+{
+	if (expect_close != 42)
+		pr_warn("watchdog device closed unexpectedly, will not disable the watchdog timer\n");
+	else if (!nowayout)
+		scx200_wdt_disable();
+	expect_close = 0;
+	clear_bit(0, &open_lock);
+
+	return 0;
+}
+
+static int scx200_wdt_notify_sys(struct notifier_block *this,
+				      unsigned long code, void *unused)
+{
+	if (code == SYS_HALT || code == SYS_POWER_OFF)
+		if (!nowayout)
+			scx200_wdt_disable();
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block scx200_wdt_notifier = {
+	.notifier_call = scx200_wdt_notify_sys,
+};
+
+static ssize_t scx200_wdt_write(struct file *file, const char __user *data,
+				     size_t len, loff_t *ppos)
+{
+	/* check for a magic close character */
+	if (len) {
+		size_t i;
+
+		scx200_wdt_ping();
+
+		expect_close = 0;
+		for (i = 0; i < len; ++i) {
+			char c;
+			if (get_user(c, data + i))
+				return -EFAULT;
+			if (c == 'V')
+				expect_close = 42;
+		}
+
+		return len;
+	}
+
+	return 0;
+}
+
+static long scx200_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static const struct watchdog_info ident = {
+		.identity = "NatSemi SCx200 Watchdog",
+		.firmware_version = 1,
+		.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+						WDIOF_MAGICCLOSE,
+	};
+	int new_margin;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		return 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		if (put_user(0, p))
+			return -EFAULT;
+		return 0;
+	case WDIOC_KEEPALIVE:
+		scx200_wdt_ping();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_margin, p))
+			return -EFAULT;
+		if (new_margin < 1)
+			return -EINVAL;
+		margin = new_margin;
+		scx200_wdt_update_margin();
+		scx200_wdt_ping();
+	case WDIOC_GETTIMEOUT:
+		if (put_user(margin, p))
+			return -EFAULT;
+		return 0;
+	default:
+		return -ENOTTY;
+	}
+}
+
+static const struct file_operations scx200_wdt_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = scx200_wdt_write,
+	.unlocked_ioctl = scx200_wdt_ioctl,
+	.open = scx200_wdt_open,
+	.release = scx200_wdt_release,
+};
+
+static struct miscdevice scx200_wdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &scx200_wdt_fops,
+};
+
+static int __init scx200_wdt_init(void)
+{
+	int r;
+
+	pr_debug("NatSemi SCx200 Watchdog Driver\n");
+
+	/* check that we have found the configuration block */
+	if (!scx200_cb_present())
+		return -ENODEV;
+
+	if (!request_region(scx200_cb_base + SCx200_WDT_OFFSET,
+			    SCx200_WDT_SIZE,
+			    "NatSemi SCx200 Watchdog")) {
+		pr_warn("watchdog I/O region busy\n");
+		return -EBUSY;
+	}
+
+	scx200_wdt_update_margin();
+	scx200_wdt_disable();
+
+	r = register_reboot_notifier(&scx200_wdt_notifier);
+	if (r) {
+		pr_err("unable to register reboot notifier\n");
+		release_region(scx200_cb_base + SCx200_WDT_OFFSET,
+				SCx200_WDT_SIZE);
+		return r;
+	}
+
+	r = misc_register(&scx200_wdt_miscdev);
+	if (r) {
+		unregister_reboot_notifier(&scx200_wdt_notifier);
+		release_region(scx200_cb_base + SCx200_WDT_OFFSET,
+				SCx200_WDT_SIZE);
+		return r;
+	}
+
+	return 0;
+}
+
+static void __exit scx200_wdt_cleanup(void)
+{
+	misc_deregister(&scx200_wdt_miscdev);
+	unregister_reboot_notifier(&scx200_wdt_notifier);
+	release_region(scx200_cb_base + SCx200_WDT_OFFSET,
+		       SCx200_WDT_SIZE);
+}
+
+module_init(scx200_wdt_init);
+module_exit(scx200_wdt_cleanup);
+
+/*
+    Local variables:
+	compile-command: "make -k -C ../.. SUBDIRS=drivers/char modules"
+	c-basic-offset: 8
+    End:
+*/
diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c
new file mode 100644
index 000000000..a7d6425db
--- /dev/null
+++ b/drivers/watchdog/shwdt.c
@@ -0,0 +1,350 @@
+/*
+ * drivers/watchdog/shwdt.c
+ *
+ * Watchdog driver for integrated watchdog in the SuperH processors.
+ *
+ * Copyright (C) 2001 - 2012  Paul Mundt <lethal@linux-sh.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
+ *     Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
+ *
+ * 19-Apr-2002 Rob Radez <rob@osinvestor.com>
+ *     Added expect close support, made emulated timeout runtime changeable
+ *     general cleanups, add some ioctls
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/watchdog.h>
+#include <linux/pm_runtime.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <asm/watchdog.h>
+
+#define DRV_NAME "sh-wdt"
+
+/*
+ * Default clock division ratio is 5.25 msecs. For an additional table of
+ * values, consult the asm-sh/watchdog.h. Overload this at module load
+ * time.
+ *
+ * In order for this to work reliably we need to have HZ set to 1000 or
+ * something quite higher than 100 (or we need a proper high-res timer
+ * implementation that will deal with this properly), otherwise the 10ms
+ * resolution of a jiffy is enough to trigger the overflow. For things like
+ * the SH-4 and SH-5, this isn't necessarily that big of a problem, though
+ * for the SH-2 and SH-3, this isn't recommended unless the WDT is absolutely
+ * necssary.
+ *
+ * As a result of this timing problem, the only modes that are particularly
+ * feasible are the 4096 and the 2048 divisors, which yield 5.25 and 2.62ms
+ * overflow periods respectively.
+ *
+ * Also, since we can't really expect userspace to be responsive enough
+ * before the overflow happens, we maintain two separate timers .. One in
+ * the kernel for clearing out WOVF every 2ms or so (again, this depends on
+ * HZ == 1000), and another for monitoring userspace writes to the WDT device.
+ *
+ * As such, we currently use a configurable heartbeat interval which defaults
+ * to 30s. In this case, the userspace daemon is only responsible for periodic
+ * writes to the device before the next heartbeat is scheduled. If the daemon
+ * misses its deadline, the kernel timer will allow the WDT to overflow.
+ */
+static int clock_division_ratio = WTCSR_CKS_4096;
+#define next_ping_period(cks)	(jiffies + msecs_to_jiffies(cks - 4))
+
+#define WATCHDOG_HEARTBEAT 30			/* 30 sec default heartbeat */
+static int heartbeat = WATCHDOG_HEARTBEAT;	/* in seconds */
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static unsigned long next_heartbeat;
+
+struct sh_wdt {
+	void __iomem		*base;
+	struct device		*dev;
+	struct clk		*clk;
+	spinlock_t		lock;
+
+	struct timer_list	timer;
+};
+
+static int sh_wdt_start(struct watchdog_device *wdt_dev)
+{
+	struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+	unsigned long flags;
+	u8 csr;
+
+	pm_runtime_get_sync(wdt->dev);
+	clk_enable(wdt->clk);
+
+	spin_lock_irqsave(&wdt->lock, flags);
+
+	next_heartbeat = jiffies + (heartbeat * HZ);
+	mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
+
+	csr = sh_wdt_read_csr();
+	csr |= WTCSR_WT | clock_division_ratio;
+	sh_wdt_write_csr(csr);
+
+	sh_wdt_write_cnt(0);
+
+	/*
+	 * These processors have a bit of an inconsistent initialization
+	 * process.. starting with SH-3, RSTS was moved to WTCSR, and the
+	 * RSTCSR register was removed.
+	 *
+	 * On the SH-2 however, in addition with bits being in different
+	 * locations, we must deal with RSTCSR outright..
+	 */
+	csr = sh_wdt_read_csr();
+	csr |= WTCSR_TME;
+	csr &= ~WTCSR_RSTS;
+	sh_wdt_write_csr(csr);
+
+#ifdef CONFIG_CPU_SH2
+	csr = sh_wdt_read_rstcsr();
+	csr &= ~RSTCSR_RSTS;
+	sh_wdt_write_rstcsr(csr);
+#endif
+	spin_unlock_irqrestore(&wdt->lock, flags);
+
+	return 0;
+}
+
+static int sh_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+	unsigned long flags;
+	u8 csr;
+
+	spin_lock_irqsave(&wdt->lock, flags);
+
+	del_timer(&wdt->timer);
+
+	csr = sh_wdt_read_csr();
+	csr &= ~WTCSR_TME;
+	sh_wdt_write_csr(csr);
+
+	spin_unlock_irqrestore(&wdt->lock, flags);
+
+	clk_disable(wdt->clk);
+	pm_runtime_put_sync(wdt->dev);
+
+	return 0;
+}
+
+static int sh_wdt_keepalive(struct watchdog_device *wdt_dev)
+{
+	struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdt->lock, flags);
+	next_heartbeat = jiffies + (heartbeat * HZ);
+	spin_unlock_irqrestore(&wdt->lock, flags);
+
+	return 0;
+}
+
+static int sh_wdt_set_heartbeat(struct watchdog_device *wdt_dev, unsigned t)
+{
+	struct sh_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+	unsigned long flags;
+
+	if (unlikely(t < 1 || t > 3600)) /* arbitrary upper limit */
+		return -EINVAL;
+
+	spin_lock_irqsave(&wdt->lock, flags);
+	heartbeat = t;
+	wdt_dev->timeout = t;
+	spin_unlock_irqrestore(&wdt->lock, flags);
+
+	return 0;
+}
+
+static void sh_wdt_ping(struct timer_list *t)
+{
+	struct sh_wdt *wdt = from_timer(wdt, t, timer);
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdt->lock, flags);
+	if (time_before(jiffies, next_heartbeat)) {
+		u8 csr;
+
+		csr = sh_wdt_read_csr();
+		csr &= ~WTCSR_IOVF;
+		sh_wdt_write_csr(csr);
+
+		sh_wdt_write_cnt(0);
+
+		mod_timer(&wdt->timer, next_ping_period(clock_division_ratio));
+	} else
+		dev_warn(wdt->dev, "Heartbeat lost! Will not ping "
+		         "the watchdog\n");
+	spin_unlock_irqrestore(&wdt->lock, flags);
+}
+
+static const struct watchdog_info sh_wdt_info = {
+	.options		= WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+				  WDIOF_MAGICCLOSE,
+	.firmware_version	= 1,
+	.identity		= "SH WDT",
+};
+
+static const struct watchdog_ops sh_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= sh_wdt_start,
+	.stop		= sh_wdt_stop,
+	.ping		= sh_wdt_keepalive,
+	.set_timeout	= sh_wdt_set_heartbeat,
+};
+
+static struct watchdog_device sh_wdt_dev = {
+	.info	= &sh_wdt_info,
+	.ops	= &sh_wdt_ops,
+};
+
+static int sh_wdt_probe(struct platform_device *pdev)
+{
+	struct sh_wdt *wdt;
+	struct resource *res;
+	int rc;
+
+	/*
+	 * As this driver only covers the global watchdog case, reject
+	 * any attempts to register per-CPU watchdogs.
+	 */
+	if (pdev->id != -1)
+		return -EINVAL;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(struct sh_wdt), GFP_KERNEL);
+	if (unlikely(!wdt))
+		return -ENOMEM;
+
+	wdt->dev = &pdev->dev;
+
+	wdt->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(wdt->clk)) {
+		/*
+		 * Clock framework support is optional, continue on
+		 * anyways if we don't find a matching clock.
+		 */
+		wdt->clk = NULL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->base = devm_ioremap_resource(wdt->dev, res);
+	if (IS_ERR(wdt->base))
+		return PTR_ERR(wdt->base);
+
+	watchdog_set_nowayout(&sh_wdt_dev, nowayout);
+	watchdog_set_drvdata(&sh_wdt_dev, wdt);
+	sh_wdt_dev.parent = &pdev->dev;
+
+	spin_lock_init(&wdt->lock);
+
+	rc = sh_wdt_set_heartbeat(&sh_wdt_dev, heartbeat);
+	if (unlikely(rc)) {
+		/* Default timeout if invalid */
+		sh_wdt_set_heartbeat(&sh_wdt_dev, WATCHDOG_HEARTBEAT);
+
+		dev_warn(&pdev->dev,
+			 "heartbeat value must be 1<=x<=3600, using %d\n",
+			 sh_wdt_dev.timeout);
+	}
+
+	dev_info(&pdev->dev, "configured with heartbeat=%d sec (nowayout=%d)\n",
+		 sh_wdt_dev.timeout, nowayout);
+
+	rc = watchdog_register_device(&sh_wdt_dev);
+	if (unlikely(rc)) {
+		dev_err(&pdev->dev, "Can't register watchdog (err=%d)\n", rc);
+		return rc;
+	}
+
+	timer_setup(&wdt->timer, sh_wdt_ping, 0);
+	wdt->timer.expires	= next_ping_period(clock_division_ratio);
+
+	dev_info(&pdev->dev, "initialized.\n");
+
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+}
+
+static int sh_wdt_remove(struct platform_device *pdev)
+{
+	watchdog_unregister_device(&sh_wdt_dev);
+
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static void sh_wdt_shutdown(struct platform_device *pdev)
+{
+	sh_wdt_stop(&sh_wdt_dev);
+}
+
+static struct platform_driver sh_wdt_driver = {
+	.driver		= {
+		.name	= DRV_NAME,
+	},
+
+	.probe		= sh_wdt_probe,
+	.remove		= sh_wdt_remove,
+	.shutdown	= sh_wdt_shutdown,
+};
+
+static int __init sh_wdt_init(void)
+{
+	if (unlikely(clock_division_ratio < 0x5 ||
+		     clock_division_ratio > 0x7)) {
+		clock_division_ratio = WTCSR_CKS_4096;
+
+		pr_info("divisor must be 0x5<=x<=0x7, using %d\n",
+			clock_division_ratio);
+	}
+
+	return platform_driver_register(&sh_wdt_driver);
+}
+
+static void __exit sh_wdt_exit(void)
+{
+	platform_driver_unregister(&sh_wdt_driver);
+}
+module_init(sh_wdt_init);
+module_exit(sh_wdt_exit);
+
+MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>");
+MODULE_DESCRIPTION("SuperH watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+
+module_param(clock_division_ratio, int, 0);
+MODULE_PARM_DESC(clock_division_ratio,
+	"Clock division ratio. Valid ranges are from 0x5 (1.31ms) "
+	"to 0x7 (5.25ms). (default=" __MODULE_STRING(WTCSR_CKS_4096) ")");
+
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat,
+	"Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default="
+				__MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
diff --git a/drivers/watchdog/sirfsoc_wdt.c b/drivers/watchdog/sirfsoc_wdt.c
new file mode 100644
index 000000000..ac0c9d2c4
--- /dev/null
+++ b/drivers/watchdog/sirfsoc_wdt.c
@@ -0,0 +1,231 @@
+/*
+ * Watchdog driver for CSR SiRFprimaII and SiRFatlasVI
+ *
+ * Copyright (c) 2013 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/moduleparam.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#define CLOCK_FREQ	1000000
+
+#define SIRFSOC_TIMER_COUNTER_LO	0x0000
+#define SIRFSOC_TIMER_MATCH_0		0x0008
+#define SIRFSOC_TIMER_INT_EN		0x0024
+#define SIRFSOC_TIMER_WATCHDOG_EN	0x0028
+#define SIRFSOC_TIMER_LATCH		0x0030
+#define SIRFSOC_TIMER_LATCHED_LO	0x0034
+
+#define SIRFSOC_TIMER_WDT_INDEX		5
+
+#define SIRFSOC_WDT_MIN_TIMEOUT		30		/* 30 secs */
+#define SIRFSOC_WDT_MAX_TIMEOUT		(10 * 60)	/* 10 mins */
+#define SIRFSOC_WDT_DEFAULT_TIMEOUT	30		/* 30 secs */
+
+static unsigned int timeout;
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+module_param(timeout, uint, 0);
+module_param(nowayout, bool, 0);
+
+MODULE_PARM_DESC(timeout, "Default watchdog timeout (in seconds)");
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+			__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static void __iomem *sirfsoc_wdt_base(struct watchdog_device *wdd)
+{
+	return (void __iomem __force *)watchdog_get_drvdata(wdd);
+}
+
+static unsigned int sirfsoc_wdt_gettimeleft(struct watchdog_device *wdd)
+{
+	u32 counter, match;
+	void __iomem *wdt_base;
+	int time_left;
+
+	wdt_base = sirfsoc_wdt_base(wdd);
+	counter = readl(wdt_base + SIRFSOC_TIMER_COUNTER_LO);
+	match = readl(wdt_base +
+		SIRFSOC_TIMER_MATCH_0 + (SIRFSOC_TIMER_WDT_INDEX << 2));
+
+	time_left = match - counter;
+
+	return time_left / CLOCK_FREQ;
+}
+
+static int sirfsoc_wdt_updatetimeout(struct watchdog_device *wdd)
+{
+	u32 counter, timeout_ticks;
+	void __iomem *wdt_base;
+
+	timeout_ticks = wdd->timeout * CLOCK_FREQ;
+	wdt_base = sirfsoc_wdt_base(wdd);
+
+	/* Enable the latch before reading the LATCH_LO register */
+	writel(1, wdt_base + SIRFSOC_TIMER_LATCH);
+
+	/* Set the TO value */
+	counter = readl(wdt_base + SIRFSOC_TIMER_LATCHED_LO);
+
+	counter += timeout_ticks;
+
+	writel(counter, wdt_base +
+		SIRFSOC_TIMER_MATCH_0 + (SIRFSOC_TIMER_WDT_INDEX << 2));
+
+	return 0;
+}
+
+static int sirfsoc_wdt_enable(struct watchdog_device *wdd)
+{
+	void __iomem *wdt_base = sirfsoc_wdt_base(wdd);
+	sirfsoc_wdt_updatetimeout(wdd);
+
+	/*
+	 * NOTE: If interrupt is not enabled
+	 * then WD-Reset doesn't get generated at all.
+	 */
+	writel(readl(wdt_base + SIRFSOC_TIMER_INT_EN)
+		| (1 << SIRFSOC_TIMER_WDT_INDEX),
+		wdt_base + SIRFSOC_TIMER_INT_EN);
+	writel(1, wdt_base + SIRFSOC_TIMER_WATCHDOG_EN);
+
+	return 0;
+}
+
+static int sirfsoc_wdt_disable(struct watchdog_device *wdd)
+{
+	void __iomem *wdt_base = sirfsoc_wdt_base(wdd);
+
+	writel(0, wdt_base + SIRFSOC_TIMER_WATCHDOG_EN);
+	writel(readl(wdt_base + SIRFSOC_TIMER_INT_EN)
+		& (~(1 << SIRFSOC_TIMER_WDT_INDEX)),
+		wdt_base + SIRFSOC_TIMER_INT_EN);
+
+	return 0;
+}
+
+static int sirfsoc_wdt_settimeout(struct watchdog_device *wdd, unsigned int to)
+{
+	wdd->timeout = to;
+	sirfsoc_wdt_updatetimeout(wdd);
+
+	return 0;
+}
+
+#define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
+
+static const struct watchdog_info sirfsoc_wdt_ident = {
+	.options          =     OPTIONS,
+	.firmware_version =	0,
+	.identity         =	"SiRFSOC Watchdog",
+};
+
+static const struct watchdog_ops sirfsoc_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = sirfsoc_wdt_enable,
+	.stop = sirfsoc_wdt_disable,
+	.get_timeleft = sirfsoc_wdt_gettimeleft,
+	.ping = sirfsoc_wdt_updatetimeout,
+	.set_timeout = sirfsoc_wdt_settimeout,
+};
+
+static struct watchdog_device sirfsoc_wdd = {
+	.info = &sirfsoc_wdt_ident,
+	.ops = &sirfsoc_wdt_ops,
+	.timeout = SIRFSOC_WDT_DEFAULT_TIMEOUT,
+	.min_timeout = SIRFSOC_WDT_MIN_TIMEOUT,
+	.max_timeout = SIRFSOC_WDT_MAX_TIMEOUT,
+};
+
+static int sirfsoc_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	int ret;
+	void __iomem *base;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	watchdog_set_drvdata(&sirfsoc_wdd, (__force void *)base);
+
+	watchdog_init_timeout(&sirfsoc_wdd, timeout, &pdev->dev);
+	watchdog_set_nowayout(&sirfsoc_wdd, nowayout);
+	sirfsoc_wdd.parent = &pdev->dev;
+
+	ret = watchdog_register_device(&sirfsoc_wdd);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, &sirfsoc_wdd);
+
+	return 0;
+}
+
+static void sirfsoc_wdt_shutdown(struct platform_device *pdev)
+{
+	struct watchdog_device *wdd = platform_get_drvdata(pdev);
+
+	sirfsoc_wdt_disable(wdd);
+}
+
+static int sirfsoc_wdt_remove(struct platform_device *pdev)
+{
+	sirfsoc_wdt_shutdown(pdev);
+	return 0;
+}
+
+#ifdef	CONFIG_PM_SLEEP
+static int sirfsoc_wdt_suspend(struct device *dev)
+{
+	return 0;
+}
+
+static int sirfsoc_wdt_resume(struct device *dev)
+{
+	struct watchdog_device *wdd = dev_get_drvdata(dev);
+
+	/*
+	 * NOTE: Since timer controller registers settings are saved
+	 * and restored back by the timer-prima2.c, so we need not
+	 * update WD settings except refreshing timeout.
+	 */
+	sirfsoc_wdt_updatetimeout(wdd);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(sirfsoc_wdt_pm_ops,
+		sirfsoc_wdt_suspend, sirfsoc_wdt_resume);
+
+static const struct of_device_id sirfsoc_wdt_of_match[] = {
+	{ .compatible = "sirf,prima2-tick"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, sirfsoc_wdt_of_match);
+
+static struct platform_driver sirfsoc_wdt_driver = {
+	.driver = {
+		.name = "sirfsoc-wdt",
+		.pm = &sirfsoc_wdt_pm_ops,
+		.of_match_table	= sirfsoc_wdt_of_match,
+	},
+	.probe = sirfsoc_wdt_probe,
+	.remove = sirfsoc_wdt_remove,
+	.shutdown = sirfsoc_wdt_shutdown,
+};
+module_platform_driver(sirfsoc_wdt_driver);
+
+MODULE_DESCRIPTION("SiRF SoC watchdog driver");
+MODULE_AUTHOR("Xianglong Du <Xianglong.Du@csr.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:sirfsoc-wdt");
diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c
new file mode 100644
index 000000000..445ea1ad1
--- /dev/null
+++ b/drivers/watchdog/smsc37b787_wdt.c
@@ -0,0 +1,618 @@
+/*
+ *	SMsC 37B787 Watchdog Timer driver for Linux 2.6.x.x
+ *
+ *	Based on acquirewdt.c by Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *	and some other existing drivers
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	The authors do NOT admit liability nor provide warranty for
+ *	any of this software. This material is provided "AS-IS" in
+ *	the hope that it may be useful for others.
+ *
+ *	(C) Copyright 2003-2006  Sven Anders <anders@anduras.de>
+ *
+ *  History:
+ *	2003 - Created version 1.0 for Linux 2.4.x.
+ *	2006 - Ported to Linux 2.6, added nowayout and MAGICCLOSE
+ *	       features. Released version 1.1
+ *
+ *  Theory of operation:
+ *
+ *	A Watchdog Timer (WDT) is a hardware circuit that can
+ *	reset the computer system in case of a software fault.
+ *	You probably knew that already.
+ *
+ *	Usually a userspace daemon will notify the kernel WDT driver
+ *	via the /dev/watchdog special device file that userspace is
+ *	still alive, at regular intervals.  When such a notification
+ *	occurs, the driver will usually tell the hardware watchdog
+ *	that everything is in order, and that the watchdog should wait
+ *	for yet another little while to reset the system.
+ *	If userspace fails (RAM error, kernel bug, whatever), the
+ *	notifications cease to occur, and the hardware watchdog will
+ *	reset the system (causing a reboot) after the timeout occurs.
+ *
+ * Create device with:
+ *  mknod /dev/watchdog c 10 130
+ *
+ * For an example userspace keep-alive daemon, see:
+ *   Documentation/watchdog/wdt.txt
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+
+/* enable support for minutes as units? */
+/* (does not always work correctly, so disabled by default!) */
+#define SMSC_SUPPORT_MINUTES
+#undef SMSC_SUPPORT_MINUTES
+
+#define MAX_TIMEOUT     255
+
+#define UNIT_SECOND     0
+#define UNIT_MINUTE     1
+
+#define VERSION		"1.1"
+
+#define IOPORT		0x3F0
+#define IOPORT_SIZE     2
+#define IODEV_NO	8
+
+static int unit = UNIT_SECOND;	/* timer's unit */
+static int timeout = 60;	/* timeout value: default is 60 "units" */
+static unsigned long timer_enabled;   /* is the timer enabled? */
+
+static char expect_close;       /* is the close expected? */
+
+static DEFINE_SPINLOCK(io_lock);/* to guard the watchdog from io races */
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+/* -- Low level function ----------------------------------------*/
+
+/* unlock the IO chip */
+
+static inline void open_io_config(void)
+{
+	outb(0x55, IOPORT);
+	mdelay(1);
+	outb(0x55, IOPORT);
+}
+
+/* lock the IO chip */
+static inline void close_io_config(void)
+{
+	outb(0xAA, IOPORT);
+}
+
+/* select the IO device */
+static inline void select_io_device(unsigned char devno)
+{
+	outb(0x07, IOPORT);
+	outb(devno, IOPORT+1);
+}
+
+/* write to the control register */
+static inline void write_io_cr(unsigned char reg, unsigned char data)
+{
+	outb(reg, IOPORT);
+	outb(data, IOPORT+1);
+}
+
+/* read from the control register */
+static inline char read_io_cr(unsigned char reg)
+{
+	outb(reg, IOPORT);
+	return inb(IOPORT+1);
+}
+
+/* -- Medium level functions ------------------------------------*/
+
+static inline void gpio_bit12(unsigned char reg)
+{
+	/* -- General Purpose I/O Bit 1.2 --
+	 * Bit 0,   In/Out: 0 = Output, 1 = Input
+	 * Bit 1,   Polarity: 0 = No Invert, 1 = Invert
+	 * Bit 2,   Group Enable Intr.: 0 = Disable, 1 = Enable
+	 * Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17,
+	 *                           11 = Either Edge Triggered Intr. 2
+	 * Bit 5/6  (Reserved)
+	 * Bit 7,   Output Type: 0 = Push Pull Bit, 1 = Open Drain
+	 */
+	write_io_cr(0xE2, reg);
+}
+
+static inline void gpio_bit13(unsigned char reg)
+{
+	/* -- General Purpose I/O Bit 1.3 --
+	 * Bit 0,  In/Out: 0 = Output, 1 = Input
+	 * Bit 1,  Polarity: 0 = No Invert, 1 = Invert
+	 * Bit 2,  Group Enable Intr.: 0 = Disable, 1 = Enable
+	 * Bit 3,  Function select: 0 = GPI/O, 1 = LED
+	 * Bit 4-6 (Reserved)
+	 * Bit 7,  Output Type: 0 = Push Pull Bit, 1 = Open Drain
+	 */
+	write_io_cr(0xE3, reg);
+}
+
+static inline void wdt_timer_units(unsigned char new_units)
+{
+	/* -- Watchdog timer units --
+	 * Bit 0-6 (Reserved)
+	 * Bit 7,  WDT Time-out Value Units Select
+	 *         (0 = Minutes, 1 = Seconds)
+	 */
+	write_io_cr(0xF1, new_units);
+}
+
+static inline void wdt_timeout_value(unsigned char new_timeout)
+{
+	/* -- Watchdog Timer Time-out Value --
+	 * Bit 0-7 Binary coded units (0=Disabled, 1..255)
+	 */
+	write_io_cr(0xF2, new_timeout);
+}
+
+static inline void wdt_timer_conf(unsigned char conf)
+{
+	/* -- Watchdog timer configuration --
+	 * Bit 0   Joystick enable: 0* = No Reset, 1 = Reset WDT upon
+	 *							Gameport I/O
+	 * Bit 1   Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr.
+	 * Bit 2   Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr
+	 * Bit 3   Reset the timer
+	 *         (Wrong in SMsC documentation? Given as: PowerLED Timout
+	 *							Enabled)
+	 * Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled,
+	 *            0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15)
+	 */
+	write_io_cr(0xF3, conf);
+}
+
+static inline void wdt_timer_ctrl(unsigned char reg)
+{
+	/* -- Watchdog timer control --
+	 * Bit 0   Status Bit: 0 = Timer counting, 1 = Timeout occurred
+	 * Bit 1   Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz
+	 * Bit 2   Force Timeout: 1 = Forces WD timeout event (self-cleaning)
+	 * Bit 3   P20 Force Timeout enabled:
+	 *          0 = P20 activity does not generate the WD timeout event
+	 *          1 = P20 Allows rising edge of P20, from the keyboard
+	 *              controller, to force the WD timeout event.
+	 * Bit 4   (Reserved)
+	 * -- Soft power management --
+	 * Bit 5   Stop Counter: 1 = Stop software power down counter
+	 *            set via register 0xB8, (self-cleaning)
+	 *            (Upon read: 0 = Counter running, 1 = Counter stopped)
+	 * Bit 6   Restart Counter: 1 = Restart software power down counter
+	 *            set via register 0xB8, (self-cleaning)
+	 * Bit 7   SPOFF: 1 = Force software power down (self-cleaning)
+	 */
+	write_io_cr(0xF4, reg);
+}
+
+/* -- Higher level functions ------------------------------------*/
+
+/* initialize watchdog */
+
+static void wb_smsc_wdt_initialize(void)
+{
+	unsigned char old;
+
+	spin_lock(&io_lock);
+	open_io_config();
+	select_io_device(IODEV_NO);
+
+	/* enable the watchdog */
+	gpio_bit13(0x08);  /* Select pin 80 = LED not GPIO */
+	gpio_bit12(0x0A);  /* Set pin 79 = WDT not
+			      GPIO/Output/Polarity=Invert */
+	/* disable the timeout */
+	wdt_timeout_value(0);
+
+	/* reset control register */
+	wdt_timer_ctrl(0x00);
+
+	/* reset configuration register */
+	wdt_timer_conf(0x00);
+
+	/* read old (timer units) register */
+	old = read_io_cr(0xF1) & 0x7F;
+	if (unit == UNIT_SECOND)
+		old |= 0x80;	/* set to seconds */
+
+	/* set the watchdog timer units */
+	wdt_timer_units(old);
+
+	close_io_config();
+	spin_unlock(&io_lock);
+}
+
+/* shutdown the watchdog */
+
+static void wb_smsc_wdt_shutdown(void)
+{
+	spin_lock(&io_lock);
+	open_io_config();
+	select_io_device(IODEV_NO);
+
+	/* disable the watchdog */
+	gpio_bit13(0x09);
+	gpio_bit12(0x09);
+
+	/* reset watchdog config register */
+	wdt_timer_conf(0x00);
+
+	/* reset watchdog control register */
+	wdt_timer_ctrl(0x00);
+
+	/* disable timeout */
+	wdt_timeout_value(0x00);
+
+	close_io_config();
+	spin_unlock(&io_lock);
+}
+
+/* set timeout => enable watchdog */
+
+static void wb_smsc_wdt_set_timeout(unsigned char new_timeout)
+{
+	spin_lock(&io_lock);
+	open_io_config();
+	select_io_device(IODEV_NO);
+
+	/* set Power LED to blink, if we enable the timeout */
+	wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02);
+
+	/* set timeout value */
+	wdt_timeout_value(new_timeout);
+
+	close_io_config();
+	spin_unlock(&io_lock);
+}
+
+/* get timeout */
+
+static unsigned char wb_smsc_wdt_get_timeout(void)
+{
+	unsigned char set_timeout;
+
+	spin_lock(&io_lock);
+	open_io_config();
+	select_io_device(IODEV_NO);
+	set_timeout = read_io_cr(0xF2);
+	close_io_config();
+	spin_unlock(&io_lock);
+
+	return set_timeout;
+}
+
+/* disable watchdog */
+
+static void wb_smsc_wdt_disable(void)
+{
+	/* set the timeout to 0 to disable the watchdog */
+	wb_smsc_wdt_set_timeout(0);
+}
+
+/* enable watchdog by setting the current timeout */
+
+static void wb_smsc_wdt_enable(void)
+{
+	/* set the current timeout... */
+	wb_smsc_wdt_set_timeout(timeout);
+}
+
+/* reset the timer */
+
+static void wb_smsc_wdt_reset_timer(void)
+{
+	spin_lock(&io_lock);
+	open_io_config();
+	select_io_device(IODEV_NO);
+
+	/* reset the timer */
+	wdt_timeout_value(timeout);
+	wdt_timer_conf(0x08);
+
+	close_io_config();
+	spin_unlock(&io_lock);
+}
+
+/* return, if the watchdog is enabled (timeout is set...) */
+
+static int wb_smsc_wdt_status(void)
+{
+	return (wb_smsc_wdt_get_timeout() == 0) ? 0 : WDIOF_KEEPALIVEPING;
+}
+
+
+/* -- File operations -------------------------------------------*/
+
+/* open => enable watchdog and set initial timeout */
+
+static int wb_smsc_wdt_open(struct inode *inode, struct file *file)
+{
+	/* /dev/watchdog can only be opened once */
+
+	if (test_and_set_bit(0, &timer_enabled))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	/* Reload and activate timer */
+	wb_smsc_wdt_enable();
+
+	pr_info("Watchdog enabled. Timeout set to %d %s\n",
+		timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
+
+	return nonseekable_open(inode, file);
+}
+
+/* close => shut off the timer */
+
+static int wb_smsc_wdt_release(struct inode *inode, struct file *file)
+{
+	/* Shut off the timer. */
+
+	if (expect_close == 42) {
+		wb_smsc_wdt_disable();
+		pr_info("Watchdog disabled, sleeping again...\n");
+	} else {
+		pr_crit("Unexpected close, not stopping watchdog!\n");
+		wb_smsc_wdt_reset_timer();
+	}
+
+	clear_bit(0, &timer_enabled);
+	expect_close = 0;
+	return 0;
+}
+
+/* write => update the timer to keep the machine alive */
+
+static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data,
+				 size_t len, loff_t *ppos)
+{
+	/* See if we got the magic character 'V' and reload the timer */
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			/* reset expect flag */
+			expect_close = 0;
+
+			/* scan to see whether or not we got the
+			   magic character */
+			for (i = 0; i != len; i++) {
+				char c;
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+
+		/* someone wrote to us, we should reload the timer */
+		wb_smsc_wdt_reset_timer();
+	}
+	return len;
+}
+
+/* ioctl => control interface */
+
+static long wb_smsc_wdt_ioctl(struct file *file,
+					unsigned int cmd, unsigned long arg)
+{
+	int new_timeout;
+
+	union {
+		struct watchdog_info __user *ident;
+		int __user *i;
+	} uarg;
+
+	static const struct watchdog_info ident = {
+		.options =		WDIOF_KEEPALIVEPING |
+					WDIOF_SETTIMEOUT |
+					WDIOF_MAGICCLOSE,
+		.firmware_version =	0,
+		.identity =		"SMsC 37B787 Watchdog",
+	};
+
+	uarg.i = (int __user *)arg;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(uarg.ident, &ident, sizeof(ident))
+								? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+		return put_user(wb_smsc_wdt_status(), uarg.i);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, uarg.i);
+	case WDIOC_SETOPTIONS:
+	{
+		int options, retval = -EINVAL;
+
+		if (get_user(options, uarg.i))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD) {
+			wb_smsc_wdt_disable();
+			retval = 0;
+		}
+		if (options & WDIOS_ENABLECARD) {
+			wb_smsc_wdt_enable();
+			retval = 0;
+		}
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wb_smsc_wdt_reset_timer();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, uarg.i))
+			return -EFAULT;
+		/* the API states this is given in secs */
+		if (unit == UNIT_MINUTE)
+			new_timeout /= 60;
+		if (new_timeout < 0 || new_timeout > MAX_TIMEOUT)
+			return -EINVAL;
+		timeout = new_timeout;
+		wb_smsc_wdt_set_timeout(timeout);
+		/* fall through and return the new timeout... */
+	case WDIOC_GETTIMEOUT:
+		new_timeout = timeout;
+		if (unit == UNIT_MINUTE)
+			new_timeout *= 60;
+		return put_user(new_timeout, uarg.i);
+	default:
+		return -ENOTTY;
+	}
+}
+
+/* -- Notifier funtions -----------------------------------------*/
+
+static int wb_smsc_wdt_notify_sys(struct notifier_block *this,
+					unsigned long code, void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT) {
+		/* set timeout to 0, to avoid possible race-condition */
+		timeout = 0;
+		wb_smsc_wdt_disable();
+	}
+	return NOTIFY_DONE;
+}
+
+/* -- Module's structures ---------------------------------------*/
+
+static const struct file_operations wb_smsc_wdt_fops = {
+	.owner	  = THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= wb_smsc_wdt_write,
+	.unlocked_ioctl	= wb_smsc_wdt_ioctl,
+	.open		= wb_smsc_wdt_open,
+	.release	= wb_smsc_wdt_release,
+};
+
+static struct notifier_block wb_smsc_wdt_notifier = {
+	.notifier_call  = wb_smsc_wdt_notify_sys,
+};
+
+static struct miscdevice wb_smsc_wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &wb_smsc_wdt_fops,
+};
+
+/* -- Module init functions -------------------------------------*/
+
+/* module's "constructor" */
+
+static int __init wb_smsc_wdt_init(void)
+{
+	int ret;
+
+	pr_info("SMsC 37B787 watchdog component driver "
+		VERSION " initialising...\n");
+
+	if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) {
+		pr_err("Unable to register IO port %#x\n", IOPORT);
+		ret = -EBUSY;
+		goto out_pnp;
+	}
+
+	/* set new maximum, if it's too big */
+	if (timeout > MAX_TIMEOUT)
+		timeout = MAX_TIMEOUT;
+
+	/* init the watchdog timer */
+	wb_smsc_wdt_initialize();
+
+	ret = register_reboot_notifier(&wb_smsc_wdt_notifier);
+	if (ret) {
+		pr_err("Unable to register reboot notifier err = %d\n", ret);
+		goto out_io;
+	}
+
+	ret = misc_register(&wb_smsc_wdt_miscdev);
+	if (ret) {
+		pr_err("Unable to register miscdev on minor %d\n",
+		       WATCHDOG_MINOR);
+		goto out_rbt;
+	}
+
+	/* output info */
+	pr_info("Timeout set to %d %s\n",
+		timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)");
+	pr_info("Watchdog initialized and sleeping (nowayout=%d)...\n",
+		nowayout);
+out_clean:
+	return ret;
+
+out_rbt:
+	unregister_reboot_notifier(&wb_smsc_wdt_notifier);
+
+out_io:
+	release_region(IOPORT, IOPORT_SIZE);
+
+out_pnp:
+	goto out_clean;
+}
+
+/* module's "destructor" */
+
+static void __exit wb_smsc_wdt_exit(void)
+{
+	/* Stop the timer before we leave */
+	if (!nowayout) {
+		wb_smsc_wdt_shutdown();
+		pr_info("Watchdog disabled\n");
+	}
+
+	misc_deregister(&wb_smsc_wdt_miscdev);
+	unregister_reboot_notifier(&wb_smsc_wdt_notifier);
+	release_region(IOPORT, IOPORT_SIZE);
+
+	pr_info("SMsC 37B787 watchdog component driver removed\n");
+}
+
+module_init(wb_smsc_wdt_init);
+module_exit(wb_smsc_wdt_exit);
+
+MODULE_AUTHOR("Sven Anders <anders@anduras.de>");
+MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version "
+								VERSION ")");
+MODULE_LICENSE("GPL");
+
+#ifdef SMSC_SUPPORT_MINUTES
+module_param(unit, int, 0);
+MODULE_PARM_DESC(unit,
+		"set unit to use, 0=seconds or 1=minutes, default is 0");
+#endif
+
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "range is 1-255 units, default is 60");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
diff --git a/drivers/watchdog/softdog.c b/drivers/watchdog/softdog.c
new file mode 100644
index 000000000..060740625
--- /dev/null
+++ b/drivers/watchdog/softdog.c
@@ -0,0 +1,171 @@
+/*
+ *	SoftDog:	A Software Watchdog Device
+ *
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *							All Rights Reserved.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ *	warranty for any of this software. This material is provided
+ *	"AS-IS" and at no charge.
+ *
+ *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ *	Software only watchdog driver. Unlike its big brother the WDT501P
+ *	driver this won't always recover a failed machine.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/hrtimer.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/reboot.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+#define TIMER_MARGIN	60		/* Default is 60 seconds */
+static unsigned int soft_margin = TIMER_MARGIN;	/* in seconds */
+module_param(soft_margin, uint, 0);
+MODULE_PARM_DESC(soft_margin,
+	"Watchdog soft_margin in seconds. (0 < soft_margin < 65536, default="
+					__MODULE_STRING(TIMER_MARGIN) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int soft_noboot;
+module_param(soft_noboot, int, 0);
+MODULE_PARM_DESC(soft_noboot,
+	"Softdog action, set to 1 to ignore reboots, 0 to reboot (default=0)");
+
+static int soft_panic;
+module_param(soft_panic, int, 0);
+MODULE_PARM_DESC(soft_panic,
+	"Softdog action, set to 1 to panic, 0 to reboot (default=0)");
+
+static struct hrtimer softdog_ticktock;
+static struct hrtimer softdog_preticktock;
+
+static enum hrtimer_restart softdog_fire(struct hrtimer *timer)
+{
+	module_put(THIS_MODULE);
+	if (soft_noboot) {
+		pr_crit("Triggered - Reboot ignored\n");
+	} else if (soft_panic) {
+		pr_crit("Initiating panic\n");
+		panic("Software Watchdog Timer expired");
+	} else {
+		pr_crit("Initiating system reboot\n");
+		emergency_restart();
+		pr_crit("Reboot didn't ?????\n");
+	}
+
+	return HRTIMER_NORESTART;
+}
+
+static struct watchdog_device softdog_dev;
+
+static enum hrtimer_restart softdog_pretimeout(struct hrtimer *timer)
+{
+	watchdog_notify_pretimeout(&softdog_dev);
+
+	return HRTIMER_NORESTART;
+}
+
+static int softdog_ping(struct watchdog_device *w)
+{
+	if (!hrtimer_active(&softdog_ticktock))
+		__module_get(THIS_MODULE);
+	hrtimer_start(&softdog_ticktock, ktime_set(w->timeout, 0),
+		      HRTIMER_MODE_REL);
+
+	if (IS_ENABLED(CONFIG_SOFT_WATCHDOG_PRETIMEOUT)) {
+		if (w->pretimeout)
+			hrtimer_start(&softdog_preticktock,
+				      ktime_set(w->timeout - w->pretimeout, 0),
+				      HRTIMER_MODE_REL);
+		else
+			hrtimer_cancel(&softdog_preticktock);
+	}
+
+	return 0;
+}
+
+static int softdog_stop(struct watchdog_device *w)
+{
+	if (hrtimer_cancel(&softdog_ticktock))
+		module_put(THIS_MODULE);
+
+	if (IS_ENABLED(CONFIG_SOFT_WATCHDOG_PRETIMEOUT))
+		hrtimer_cancel(&softdog_preticktock);
+
+	return 0;
+}
+
+static struct watchdog_info softdog_info = {
+	.identity = "Software Watchdog",
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops softdog_ops = {
+	.owner = THIS_MODULE,
+	.start = softdog_ping,
+	.stop = softdog_stop,
+};
+
+static struct watchdog_device softdog_dev = {
+	.info = &softdog_info,
+	.ops = &softdog_ops,
+	.min_timeout = 1,
+	.max_timeout = 65535,
+	.timeout = TIMER_MARGIN,
+};
+
+static int __init softdog_init(void)
+{
+	int ret;
+
+	watchdog_init_timeout(&softdog_dev, soft_margin, NULL);
+	watchdog_set_nowayout(&softdog_dev, nowayout);
+	watchdog_stop_on_reboot(&softdog_dev);
+
+	hrtimer_init(&softdog_ticktock, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	softdog_ticktock.function = softdog_fire;
+
+	if (IS_ENABLED(CONFIG_SOFT_WATCHDOG_PRETIMEOUT)) {
+		softdog_info.options |= WDIOF_PRETIMEOUT;
+		hrtimer_init(&softdog_preticktock, CLOCK_MONOTONIC,
+			     HRTIMER_MODE_REL);
+		softdog_preticktock.function = softdog_pretimeout;
+	}
+
+	ret = watchdog_register_device(&softdog_dev);
+	if (ret)
+		return ret;
+
+	pr_info("initialized. soft_noboot=%d soft_margin=%d sec soft_panic=%d (nowayout=%d)\n",
+		soft_noboot, softdog_dev.timeout, soft_panic, nowayout);
+
+	return 0;
+}
+module_init(softdog_init);
+
+static void __exit softdog_exit(void)
+{
+	watchdog_unregister_device(&softdog_dev);
+}
+module_exit(softdog_exit);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("Software Watchdog Device Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
new file mode 100644
index 000000000..41aaae2d5
--- /dev/null
+++ b/drivers/watchdog/sp5100_tco.c
@@ -0,0 +1,496 @@
+/*
+ *	sp5100_tco :	TCO timer driver for sp5100 chipsets
+ *
+ *	(c) Copyright 2009 Google Inc., All Rights Reserved.
+ *
+ *	Based on i8xx_tco.c:
+ *	(c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights
+ *	Reserved.
+ *				http://www.kernelconcepts.de
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	See AMD Publication 43009 "AMD SB700/710/750 Register Reference Guide",
+ *	    AMD Publication 45482 "AMD SB800-Series Southbridges Register
+ *	                                                      Reference Guide"
+ *	    AMD Publication 48751 "BIOS and Kernel Developer’s Guide (BKDG)
+ *				for AMD Family 16h Models 00h-0Fh Processors"
+ *	    AMD Publication 51192 "AMD Bolton FCH Register Reference Guide"
+ *	    AMD Publication 52740 "BIOS and Kernel Developer’s Guide (BKDG)
+ *				for AMD Family 16h Models 30h-3Fh Processors"
+ */
+
+/*
+ *	Includes, defines, variables, module parameters, ...
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+#include "sp5100_tco.h"
+
+#define TCO_DRIVER_NAME	"sp5100-tco"
+
+/* internal variables */
+
+enum tco_reg_layout {
+	sp5100, sb800, efch
+};
+
+struct sp5100_tco {
+	struct watchdog_device wdd;
+	void __iomem *tcobase;
+	enum tco_reg_layout tco_reg_layout;
+};
+
+/* the watchdog platform device */
+static struct platform_device *sp5100_tco_platform_device;
+/* the associated PCI device */
+static struct pci_dev *sp5100_tco_pci;
+
+/* module parameters */
+
+#define WATCHDOG_HEARTBEAT 60	/* 60 sec default heartbeat. */
+static int heartbeat = WATCHDOG_HEARTBEAT;  /* in seconds */
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (default="
+		 __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started."
+		" (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/*
+ * Some TCO specific functions
+ */
+
+static enum tco_reg_layout tco_reg_layout(struct pci_dev *dev)
+{
+	if (dev->vendor == PCI_VENDOR_ID_ATI &&
+	    dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
+	    dev->revision < 0x40) {
+		return sp5100;
+	} else if (dev->vendor == PCI_VENDOR_ID_AMD &&
+	    ((dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
+	     dev->revision >= 0x41) ||
+	    (dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS &&
+	     dev->revision >= 0x49))) {
+		return efch;
+	}
+	return sb800;
+}
+
+static int tco_timer_start(struct watchdog_device *wdd)
+{
+	struct sp5100_tco *tco = watchdog_get_drvdata(wdd);
+	u32 val;
+
+	val = readl(SP5100_WDT_CONTROL(tco->tcobase));
+	val |= SP5100_WDT_START_STOP_BIT;
+	writel(val, SP5100_WDT_CONTROL(tco->tcobase));
+
+	return 0;
+}
+
+static int tco_timer_stop(struct watchdog_device *wdd)
+{
+	struct sp5100_tco *tco = watchdog_get_drvdata(wdd);
+	u32 val;
+
+	val = readl(SP5100_WDT_CONTROL(tco->tcobase));
+	val &= ~SP5100_WDT_START_STOP_BIT;
+	writel(val, SP5100_WDT_CONTROL(tco->tcobase));
+
+	return 0;
+}
+
+static int tco_timer_ping(struct watchdog_device *wdd)
+{
+	struct sp5100_tco *tco = watchdog_get_drvdata(wdd);
+	u32 val;
+
+	val = readl(SP5100_WDT_CONTROL(tco->tcobase));
+	val |= SP5100_WDT_TRIGGER_BIT;
+	writel(val, SP5100_WDT_CONTROL(tco->tcobase));
+
+	return 0;
+}
+
+static int tco_timer_set_timeout(struct watchdog_device *wdd,
+				 unsigned int t)
+{
+	struct sp5100_tco *tco = watchdog_get_drvdata(wdd);
+
+	/* Write new heartbeat to watchdog */
+	writel(t, SP5100_WDT_COUNT(tco->tcobase));
+
+	wdd->timeout = t;
+
+	return 0;
+}
+
+static u8 sp5100_tco_read_pm_reg8(u8 index)
+{
+	outb(index, SP5100_IO_PM_INDEX_REG);
+	return inb(SP5100_IO_PM_DATA_REG);
+}
+
+static void sp5100_tco_update_pm_reg8(u8 index, u8 reset, u8 set)
+{
+	u8 val;
+
+	outb(index, SP5100_IO_PM_INDEX_REG);
+	val = inb(SP5100_IO_PM_DATA_REG);
+	val &= reset;
+	val |= set;
+	outb(val, SP5100_IO_PM_DATA_REG);
+}
+
+static void tco_timer_enable(struct sp5100_tco *tco)
+{
+	u32 val;
+
+	switch (tco->tco_reg_layout) {
+	case sb800:
+		/* For SB800 or later */
+		/* Set the Watchdog timer resolution to 1 sec */
+		sp5100_tco_update_pm_reg8(SB800_PM_WATCHDOG_CONFIG,
+					  0xff, SB800_PM_WATCHDOG_SECOND_RES);
+
+		/* Enable watchdog decode bit and watchdog timer */
+		sp5100_tco_update_pm_reg8(SB800_PM_WATCHDOG_CONTROL,
+					  ~SB800_PM_WATCHDOG_DISABLE,
+					  SB800_PCI_WATCHDOG_DECODE_EN);
+		break;
+	case sp5100:
+		/* For SP5100 or SB7x0 */
+		/* Enable watchdog decode bit */
+		pci_read_config_dword(sp5100_tco_pci,
+				      SP5100_PCI_WATCHDOG_MISC_REG,
+				      &val);
+
+		val |= SP5100_PCI_WATCHDOG_DECODE_EN;
+
+		pci_write_config_dword(sp5100_tco_pci,
+				       SP5100_PCI_WATCHDOG_MISC_REG,
+				       val);
+
+		/* Enable Watchdog timer and set the resolution to 1 sec */
+		sp5100_tco_update_pm_reg8(SP5100_PM_WATCHDOG_CONTROL,
+					  ~SP5100_PM_WATCHDOG_DISABLE,
+					  SP5100_PM_WATCHDOG_SECOND_RES);
+		break;
+	case efch:
+		/* Set the Watchdog timer resolution to 1 sec and enable */
+		sp5100_tco_update_pm_reg8(EFCH_PM_DECODEEN3,
+					  ~EFCH_PM_WATCHDOG_DISABLE,
+					  EFCH_PM_DECODEEN_SECOND_RES);
+		break;
+	}
+}
+
+static u32 sp5100_tco_read_pm_reg32(u8 index)
+{
+	u32 val = 0;
+	int i;
+
+	for (i = 3; i >= 0; i--)
+		val = (val << 8) + sp5100_tco_read_pm_reg8(index + i);
+
+	return val;
+}
+
+static int sp5100_tco_setupdevice(struct device *dev,
+				  struct watchdog_device *wdd)
+{
+	struct sp5100_tco *tco = watchdog_get_drvdata(wdd);
+	const char *dev_name;
+	u32 mmio_addr = 0, val;
+	int ret;
+
+	/* Request the IO ports used by this driver */
+	if (!request_muxed_region(SP5100_IO_PM_INDEX_REG,
+				  SP5100_PM_IOPORTS_SIZE, "sp5100_tco")) {
+		dev_err(dev, "I/O address 0x%04x already in use\n",
+			SP5100_IO_PM_INDEX_REG);
+		return -EBUSY;
+	}
+
+	/*
+	 * Determine type of southbridge chipset.
+	 */
+	switch (tco->tco_reg_layout) {
+	case sp5100:
+		dev_name = SP5100_DEVNAME;
+		mmio_addr = sp5100_tco_read_pm_reg32(SP5100_PM_WATCHDOG_BASE) &
+								0xfffffff8;
+		break;
+	case sb800:
+		dev_name = SB800_DEVNAME;
+		mmio_addr = sp5100_tco_read_pm_reg32(SB800_PM_WATCHDOG_BASE) &
+								0xfffffff8;
+		break;
+	case efch:
+		dev_name = SB800_DEVNAME;
+		val = sp5100_tco_read_pm_reg8(EFCH_PM_DECODEEN);
+		if (val & EFCH_PM_DECODEEN_WDT_TMREN)
+			mmio_addr = EFCH_PM_WDT_ADDR;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	/* Check MMIO address conflict */
+	if (!mmio_addr ||
+	    !devm_request_mem_region(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE,
+				     dev_name)) {
+		if (mmio_addr)
+			dev_dbg(dev, "MMIO address 0x%08x already in use\n",
+				mmio_addr);
+		switch (tco->tco_reg_layout) {
+		case sp5100:
+			/*
+			 * Secondly, Find the watchdog timer MMIO address
+			 * from SBResource_MMIO register.
+			 */
+			/* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
+			pci_read_config_dword(sp5100_tco_pci,
+					      SP5100_SB_RESOURCE_MMIO_BASE,
+					      &mmio_addr);
+			if ((mmio_addr & (SB800_ACPI_MMIO_DECODE_EN |
+					  SB800_ACPI_MMIO_SEL)) !=
+						  SB800_ACPI_MMIO_DECODE_EN) {
+				ret = -ENODEV;
+				goto unreg_region;
+			}
+			mmio_addr &= ~0xFFF;
+			mmio_addr += SB800_PM_WDT_MMIO_OFFSET;
+			break;
+		case sb800:
+			/* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
+			mmio_addr =
+				sp5100_tco_read_pm_reg32(SB800_PM_ACPI_MMIO_EN);
+			if ((mmio_addr & (SB800_ACPI_MMIO_DECODE_EN |
+					  SB800_ACPI_MMIO_SEL)) !=
+						  SB800_ACPI_MMIO_DECODE_EN) {
+				ret = -ENODEV;
+				goto unreg_region;
+			}
+			mmio_addr &= ~0xFFF;
+			mmio_addr += SB800_PM_WDT_MMIO_OFFSET;
+			break;
+		case efch:
+			val = sp5100_tco_read_pm_reg8(EFCH_PM_ISACONTROL);
+			if (!(val & EFCH_PM_ISACONTROL_MMIOEN)) {
+				ret = -ENODEV;
+				goto unreg_region;
+			}
+			mmio_addr = EFCH_PM_ACPI_MMIO_ADDR +
+				    EFCH_PM_ACPI_MMIO_WDT_OFFSET;
+			break;
+		}
+		dev_dbg(dev, "Got 0x%08x from SBResource_MMIO register\n",
+			mmio_addr);
+		if (!devm_request_mem_region(dev, mmio_addr,
+					     SP5100_WDT_MEM_MAP_SIZE,
+					     dev_name)) {
+			dev_dbg(dev, "MMIO address 0x%08x already in use\n",
+				mmio_addr);
+			ret = -EBUSY;
+			goto unreg_region;
+		}
+	}
+
+	tco->tcobase = devm_ioremap(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE);
+	if (!tco->tcobase) {
+		dev_err(dev, "failed to get tcobase address\n");
+		ret = -ENOMEM;
+		goto unreg_region;
+	}
+
+	dev_info(dev, "Using 0x%08x for watchdog MMIO address\n", mmio_addr);
+
+	/* Setup the watchdog timer */
+	tco_timer_enable(tco);
+
+	val = readl(SP5100_WDT_CONTROL(tco->tcobase));
+	if (val & SP5100_WDT_DISABLED) {
+		dev_err(dev, "Watchdog hardware is disabled\n");
+		ret = -ENODEV;
+		goto unreg_region;
+	}
+
+	/*
+	 * Save WatchDogFired status, because WatchDogFired flag is
+	 * cleared here.
+	 */
+	if (val & SP5100_WDT_FIRED)
+		wdd->bootstatus = WDIOF_CARDRESET;
+	/* Set watchdog action to reset the system */
+	val &= ~SP5100_WDT_ACTION_RESET;
+	writel(val, SP5100_WDT_CONTROL(tco->tcobase));
+
+	/* Set a reasonable heartbeat before we stop the timer */
+	tco_timer_set_timeout(wdd, wdd->timeout);
+
+	/*
+	 * Stop the TCO before we change anything so we don't race with
+	 * a zeroed timer.
+	 */
+	tco_timer_stop(wdd);
+
+	release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
+
+	return 0;
+
+unreg_region:
+	release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
+	return ret;
+}
+
+static struct watchdog_info sp5100_tco_wdt_info = {
+	.identity = "SP5100 TCO timer",
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops sp5100_tco_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = tco_timer_start,
+	.stop = tco_timer_stop,
+	.ping = tco_timer_ping,
+	.set_timeout = tco_timer_set_timeout,
+};
+
+static int sp5100_tco_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct watchdog_device *wdd;
+	struct sp5100_tco *tco;
+	int ret;
+
+	tco = devm_kzalloc(dev, sizeof(*tco), GFP_KERNEL);
+	if (!tco)
+		return -ENOMEM;
+
+	tco->tco_reg_layout = tco_reg_layout(sp5100_tco_pci);
+
+	wdd = &tco->wdd;
+	wdd->parent = dev;
+	wdd->info = &sp5100_tco_wdt_info;
+	wdd->ops = &sp5100_tco_wdt_ops;
+	wdd->timeout = WATCHDOG_HEARTBEAT;
+	wdd->min_timeout = 1;
+	wdd->max_timeout = 0xffff;
+
+	if (watchdog_init_timeout(wdd, heartbeat, NULL))
+		dev_info(dev, "timeout value invalid, using %d\n",
+			 wdd->timeout);
+	watchdog_set_nowayout(wdd, nowayout);
+	watchdog_stop_on_reboot(wdd);
+	watchdog_stop_on_unregister(wdd);
+	watchdog_set_drvdata(wdd, tco);
+
+	ret = sp5100_tco_setupdevice(dev, wdd);
+	if (ret)
+		return ret;
+
+	ret = devm_watchdog_register_device(dev, wdd);
+	if (ret) {
+		dev_err(dev, "cannot register watchdog device (err=%d)\n", ret);
+		return ret;
+	}
+
+	/* Show module parameters */
+	dev_info(dev, "initialized. heartbeat=%d sec (nowayout=%d)\n",
+		 wdd->timeout, nowayout);
+
+	return 0;
+}
+
+static struct platform_driver sp5100_tco_driver = {
+	.probe		= sp5100_tco_probe,
+	.driver		= {
+		.name	= TCO_DRIVER_NAME,
+	},
+};
+
+/*
+ * Data for PCI driver interface
+ *
+ * This data only exists for exporting the supported
+ * PCI ids via MODULE_DEVICE_TABLE.  We do not actually
+ * register a pci_driver, because someone else might
+ * want to register another driver on the same PCI id.
+ */
+static const struct pci_device_id sp5100_tco_pci_tbl[] = {
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, PCI_ANY_ID,
+	  PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, PCI_ANY_ID,
+	  PCI_ANY_ID, },
+	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_KERNCZ_SMBUS, PCI_ANY_ID,
+	  PCI_ANY_ID, },
+	{ 0, },			/* End of list */
+};
+MODULE_DEVICE_TABLE(pci, sp5100_tco_pci_tbl);
+
+static int __init sp5100_tco_init(void)
+{
+	struct pci_dev *dev = NULL;
+	int err;
+
+	/* Match the PCI device */
+	for_each_pci_dev(dev) {
+		if (pci_match_id(sp5100_tco_pci_tbl, dev) != NULL) {
+			sp5100_tco_pci = dev;
+			break;
+		}
+	}
+
+	if (!sp5100_tco_pci)
+		return -ENODEV;
+
+	pr_info("SP5100/SB800 TCO WatchDog Timer Driver\n");
+
+	err = platform_driver_register(&sp5100_tco_driver);
+	if (err)
+		return err;
+
+	sp5100_tco_platform_device =
+		platform_device_register_simple(TCO_DRIVER_NAME, -1, NULL, 0);
+	if (IS_ERR(sp5100_tco_platform_device)) {
+		err = PTR_ERR(sp5100_tco_platform_device);
+		goto unreg_platform_driver;
+	}
+
+	return 0;
+
+unreg_platform_driver:
+	platform_driver_unregister(&sp5100_tco_driver);
+	return err;
+}
+
+static void __exit sp5100_tco_exit(void)
+{
+	platform_device_unregister(sp5100_tco_platform_device);
+	platform_driver_unregister(&sp5100_tco_driver);
+}
+
+module_init(sp5100_tco_init);
+module_exit(sp5100_tco_exit);
+
+MODULE_AUTHOR("Priyanka Gupta");
+MODULE_DESCRIPTION("TCO timer driver for SP5100/SB800 chipset");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/sp5100_tco.h b/drivers/watchdog/sp5100_tco.h
new file mode 100644
index 000000000..adf015aa4
--- /dev/null
+++ b/drivers/watchdog/sp5100_tco.h
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *	sp5100_tco:	TCO timer driver for sp5100 chipsets.
+ *
+ *	(c) Copyright 2009 Google Inc., All Rights Reserved.
+ *
+ *	TCO timer driver for sp5100 chipsets
+ */
+
+#include <linux/bitops.h>
+
+/*
+ * Some address definitions for the Watchdog
+ */
+#define SP5100_WDT_MEM_MAP_SIZE		0x08
+#define SP5100_WDT_CONTROL(base)	((base) + 0x00) /* Watchdog Control */
+#define SP5100_WDT_COUNT(base)		((base) + 0x04) /* Watchdog Count */
+
+#define SP5100_WDT_START_STOP_BIT	BIT(0)
+#define SP5100_WDT_FIRED		BIT(1)
+#define SP5100_WDT_ACTION_RESET		BIT(2)
+#define SP5100_WDT_DISABLED		BIT(3)
+#define SP5100_WDT_TRIGGER_BIT		BIT(7)
+
+#define SP5100_PM_IOPORTS_SIZE		0x02
+
+/*
+ * These two IO registers are hardcoded and there doesn't seem to be a way to
+ * read them from a register.
+ */
+
+/*  For SP5100/SB7x0/SB8x0 chipset */
+#define SP5100_IO_PM_INDEX_REG		0xCD6
+#define SP5100_IO_PM_DATA_REG		0xCD7
+
+/* For SP5100/SB7x0 chipset */
+#define SP5100_SB_RESOURCE_MMIO_BASE	0x9C
+
+#define SP5100_PM_WATCHDOG_CONTROL	0x69
+#define SP5100_PM_WATCHDOG_BASE		0x6C
+
+#define SP5100_PCI_WATCHDOG_MISC_REG	0x41
+#define SP5100_PCI_WATCHDOG_DECODE_EN	BIT(3)
+
+#define SP5100_PM_WATCHDOG_DISABLE	((u8)BIT(0))
+#define SP5100_PM_WATCHDOG_SECOND_RES	GENMASK(2, 1)
+
+#define SP5100_DEVNAME			"SP5100 TCO"
+
+/*  For SB8x0(or later) chipset */
+#define SB800_PM_ACPI_MMIO_EN		0x24
+#define SB800_PM_WATCHDOG_CONTROL	0x48
+#define SB800_PM_WATCHDOG_BASE		0x48
+#define SB800_PM_WATCHDOG_CONFIG	0x4C
+
+#define SB800_PCI_WATCHDOG_DECODE_EN	BIT(0)
+#define SB800_PM_WATCHDOG_DISABLE	((u8)BIT(1))
+#define SB800_PM_WATCHDOG_SECOND_RES	GENMASK(1, 0)
+#define SB800_ACPI_MMIO_DECODE_EN	BIT(0)
+#define SB800_ACPI_MMIO_SEL		BIT(1)
+
+#define SB800_PM_WDT_MMIO_OFFSET	0xB00
+
+#define SB800_DEVNAME			"SB800 TCO"
+
+/* For recent chips with embedded FCH (rev 40+) */
+
+#define EFCH_PM_DECODEEN		0x00
+
+#define EFCH_PM_DECODEEN_WDT_TMREN	BIT(7)
+
+
+#define EFCH_PM_DECODEEN3		0x03
+#define EFCH_PM_DECODEEN_SECOND_RES	GENMASK(1, 0)
+#define EFCH_PM_WATCHDOG_DISABLE	((u8)GENMASK(3, 2))
+
+/* WDT MMIO if enabled with PM00_DECODEEN_WDT_TMREN */
+#define EFCH_PM_WDT_ADDR		0xfeb00000
+
+#define EFCH_PM_ISACONTROL		0x04
+
+#define EFCH_PM_ISACONTROL_MMIOEN	BIT(1)
+
+#define EFCH_PM_ACPI_MMIO_ADDR		0xfed80000
+#define EFCH_PM_ACPI_MMIO_WDT_OFFSET	0x00000b00
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
new file mode 100644
index 000000000..d8876fba6
--- /dev/null
+++ b/drivers/watchdog/sp805_wdt.c
@@ -0,0 +1,367 @@
+/*
+ * drivers/char/watchdog/sp805-wdt.c
+ *
+ * Watchdog driver for ARM SP805 watchdog module
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Viresh Kumar <vireshk@kernel.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2 or later. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/resource.h>
+#include <linux/amba/bus.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/of.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+/* default timeout in seconds */
+#define DEFAULT_TIMEOUT		60
+
+#define MODULE_NAME		"sp805-wdt"
+
+/* watchdog register offsets and masks */
+#define WDTLOAD			0x000
+	#define LOAD_MIN	0x00000001
+	#define LOAD_MAX	0xFFFFFFFF
+#define WDTVALUE		0x004
+#define WDTCONTROL		0x008
+	/* control register masks */
+	#define	INT_ENABLE	(1 << 0)
+	#define	RESET_ENABLE	(1 << 1)
+	#define	ENABLE_MASK	(INT_ENABLE | RESET_ENABLE)
+#define WDTINTCLR		0x00C
+#define WDTRIS			0x010
+#define WDTMIS			0x014
+	#define INT_MASK	(1 << 0)
+#define WDTLOCK			0xC00
+	#define	UNLOCK		0x1ACCE551
+	#define	LOCK		0x00000001
+
+/**
+ * struct sp805_wdt: sp805 wdt device structure
+ * @wdd: instance of struct watchdog_device
+ * @lock: spin lock protecting dev structure and io access
+ * @base: base address of wdt
+ * @clk: clock structure of wdt
+ * @adev: amba device structure of wdt
+ * @status: current status of wdt
+ * @load_val: load value to be set for current timeout
+ */
+struct sp805_wdt {
+	struct watchdog_device		wdd;
+	spinlock_t			lock;
+	void __iomem			*base;
+	struct clk			*clk;
+	u64				rate;
+	struct amba_device		*adev;
+	unsigned int			load_val;
+};
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Set to 1 to keep watchdog running after device release");
+
+/* returns true if wdt is running; otherwise returns false */
+static bool wdt_is_running(struct watchdog_device *wdd)
+{
+	struct sp805_wdt *wdt = watchdog_get_drvdata(wdd);
+	u32 wdtcontrol = readl_relaxed(wdt->base + WDTCONTROL);
+
+	return (wdtcontrol & ENABLE_MASK) == ENABLE_MASK;
+}
+
+/* This routine finds load value that will reset system in required timout */
+static int wdt_setload(struct watchdog_device *wdd, unsigned int timeout)
+{
+	struct sp805_wdt *wdt = watchdog_get_drvdata(wdd);
+	u64 load, rate;
+
+	rate = wdt->rate;
+
+	/*
+	 * sp805 runs counter with given value twice, after the end of first
+	 * counter it gives an interrupt and then starts counter again. If
+	 * interrupt already occurred then it resets the system. This is why
+	 * load is half of what should be required.
+	 */
+	load = div_u64(rate, 2) * timeout - 1;
+
+	load = (load > LOAD_MAX) ? LOAD_MAX : load;
+	load = (load < LOAD_MIN) ? LOAD_MIN : load;
+
+	spin_lock(&wdt->lock);
+	wdt->load_val = load;
+	/* roundup timeout to closest positive integer value */
+	wdd->timeout = div_u64((load + 1) * 2 + (rate / 2), rate);
+	spin_unlock(&wdt->lock);
+
+	return 0;
+}
+
+/* returns number of seconds left for reset to occur */
+static unsigned int wdt_timeleft(struct watchdog_device *wdd)
+{
+	struct sp805_wdt *wdt = watchdog_get_drvdata(wdd);
+	u64 load;
+
+	spin_lock(&wdt->lock);
+	load = readl_relaxed(wdt->base + WDTVALUE);
+
+	/*If the interrupt is inactive then time left is WDTValue + WDTLoad. */
+	if (!(readl_relaxed(wdt->base + WDTRIS) & INT_MASK))
+		load += wdt->load_val + 1;
+	spin_unlock(&wdt->lock);
+
+	return div_u64(load, wdt->rate);
+}
+
+static int
+wdt_restart(struct watchdog_device *wdd, unsigned long mode, void *cmd)
+{
+	struct sp805_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	writel_relaxed(UNLOCK, wdt->base + WDTLOCK);
+	writel_relaxed(0, wdt->base + WDTCONTROL);
+	writel_relaxed(0, wdt->base + WDTLOAD);
+	writel_relaxed(INT_ENABLE | RESET_ENABLE, wdt->base + WDTCONTROL);
+
+	/* Flush posted writes. */
+	readl_relaxed(wdt->base + WDTLOCK);
+
+	return 0;
+}
+
+static int wdt_config(struct watchdog_device *wdd, bool ping)
+{
+	struct sp805_wdt *wdt = watchdog_get_drvdata(wdd);
+	int ret;
+
+	if (!ping) {
+
+		ret = clk_prepare_enable(wdt->clk);
+		if (ret) {
+			dev_err(&wdt->adev->dev, "clock enable fail");
+			return ret;
+		}
+	}
+
+	spin_lock(&wdt->lock);
+
+	writel_relaxed(UNLOCK, wdt->base + WDTLOCK);
+	writel_relaxed(wdt->load_val, wdt->base + WDTLOAD);
+	writel_relaxed(INT_MASK, wdt->base + WDTINTCLR);
+
+	if (!ping)
+		writel_relaxed(INT_ENABLE | RESET_ENABLE, wdt->base +
+				WDTCONTROL);
+
+	writel_relaxed(LOCK, wdt->base + WDTLOCK);
+
+	/* Flush posted writes. */
+	readl_relaxed(wdt->base + WDTLOCK);
+	spin_unlock(&wdt->lock);
+
+	return 0;
+}
+
+static int wdt_ping(struct watchdog_device *wdd)
+{
+	return wdt_config(wdd, true);
+}
+
+/* enables watchdog timers reset */
+static int wdt_enable(struct watchdog_device *wdd)
+{
+	return wdt_config(wdd, false);
+}
+
+/* disables watchdog timers reset */
+static int wdt_disable(struct watchdog_device *wdd)
+{
+	struct sp805_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	spin_lock(&wdt->lock);
+
+	writel_relaxed(UNLOCK, wdt->base + WDTLOCK);
+	writel_relaxed(0, wdt->base + WDTCONTROL);
+	writel_relaxed(LOCK, wdt->base + WDTLOCK);
+
+	/* Flush posted writes. */
+	readl_relaxed(wdt->base + WDTLOCK);
+	spin_unlock(&wdt->lock);
+
+	clk_disable_unprepare(wdt->clk);
+
+	return 0;
+}
+
+static const struct watchdog_info wdt_info = {
+	.options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.identity = MODULE_NAME,
+};
+
+static const struct watchdog_ops wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= wdt_enable,
+	.stop		= wdt_disable,
+	.ping		= wdt_ping,
+	.set_timeout	= wdt_setload,
+	.get_timeleft	= wdt_timeleft,
+	.restart	= wdt_restart,
+};
+
+static int
+sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id)
+{
+	struct sp805_wdt *wdt;
+	int ret = 0;
+
+	wdt = devm_kzalloc(&adev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	wdt->base = devm_ioremap_resource(&adev->dev, &adev->res);
+	if (IS_ERR(wdt->base))
+		return PTR_ERR(wdt->base);
+
+	if (adev->dev.of_node) {
+		wdt->clk = devm_clk_get(&adev->dev, NULL);
+		if (IS_ERR(wdt->clk)) {
+			dev_err(&adev->dev, "Clock not found\n");
+			return PTR_ERR(wdt->clk);
+		}
+		wdt->rate = clk_get_rate(wdt->clk);
+	} else if (has_acpi_companion(&adev->dev)) {
+		/*
+		 * When Driver probe with ACPI device, clock devices
+		 * are not available, so watchdog rate get from
+		 * clock-frequency property given in _DSD object.
+		 */
+		device_property_read_u64(&adev->dev, "clock-frequency",
+					 &wdt->rate);
+		if (!wdt->rate) {
+			dev_err(&adev->dev, "no clock-frequency property\n");
+			return -ENODEV;
+		}
+	}
+
+	wdt->adev = adev;
+	wdt->wdd.info = &wdt_info;
+	wdt->wdd.ops = &wdt_ops;
+	wdt->wdd.parent = &adev->dev;
+
+	spin_lock_init(&wdt->lock);
+	watchdog_set_nowayout(&wdt->wdd, nowayout);
+	watchdog_set_drvdata(&wdt->wdd, wdt);
+	watchdog_set_restart_priority(&wdt->wdd, 128);
+
+	/*
+	 * If 'timeout-sec' devicetree property is specified, use that.
+	 * Otherwise, use DEFAULT_TIMEOUT
+	 */
+	wdt->wdd.timeout = DEFAULT_TIMEOUT;
+	watchdog_init_timeout(&wdt->wdd, 0, &adev->dev);
+	wdt_setload(&wdt->wdd, wdt->wdd.timeout);
+
+	/*
+	 * If HW is already running, enable/reset the wdt and set the running
+	 * bit to tell the wdt subsystem
+	 */
+	if (wdt_is_running(&wdt->wdd)) {
+		wdt_enable(&wdt->wdd);
+		set_bit(WDOG_HW_RUNNING, &wdt->wdd.status);
+	}
+
+	ret = watchdog_register_device(&wdt->wdd);
+	if (ret) {
+		dev_err(&adev->dev, "watchdog_register_device() failed: %d\n",
+				ret);
+		goto err;
+	}
+	amba_set_drvdata(adev, wdt);
+
+	dev_info(&adev->dev, "registration successful\n");
+	return 0;
+
+err:
+	dev_err(&adev->dev, "Probe Failed!!!\n");
+	return ret;
+}
+
+static int sp805_wdt_remove(struct amba_device *adev)
+{
+	struct sp805_wdt *wdt = amba_get_drvdata(adev);
+
+	watchdog_unregister_device(&wdt->wdd);
+	watchdog_set_drvdata(&wdt->wdd, NULL);
+
+	return 0;
+}
+
+static int __maybe_unused sp805_wdt_suspend(struct device *dev)
+{
+	struct sp805_wdt *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->wdd))
+		return wdt_disable(&wdt->wdd);
+
+	return 0;
+}
+
+static int __maybe_unused sp805_wdt_resume(struct device *dev)
+{
+	struct sp805_wdt *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->wdd))
+		return wdt_enable(&wdt->wdd);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(sp805_wdt_dev_pm_ops, sp805_wdt_suspend,
+		sp805_wdt_resume);
+
+static const struct amba_id sp805_wdt_ids[] = {
+	{
+		.id	= 0x00141805,
+		.mask	= 0x00ffffff,
+	},
+	{ 0, 0 },
+};
+
+MODULE_DEVICE_TABLE(amba, sp805_wdt_ids);
+
+static struct amba_driver sp805_wdt_driver = {
+	.drv = {
+		.name	= MODULE_NAME,
+		.pm	= &sp805_wdt_dev_pm_ops,
+	},
+	.id_table	= sp805_wdt_ids,
+	.probe		= sp805_wdt_probe,
+	.remove = sp805_wdt_remove,
+};
+
+module_amba_driver(sp805_wdt_driver);
+
+MODULE_AUTHOR("Viresh Kumar <vireshk@kernel.org>");
+MODULE_DESCRIPTION("ARM SP805 Watchdog Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/sprd_wdt.c b/drivers/watchdog/sprd_wdt.c
new file mode 100644
index 000000000..86cf93af9
--- /dev/null
+++ b/drivers/watchdog/sprd_wdt.c
@@ -0,0 +1,393 @@
+/*
+ * Spreadtrum watchdog driver
+ * Copyright (C) 2017 Spreadtrum - http://www.spreadtrum.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define SPRD_WDT_LOAD_LOW		0x0
+#define SPRD_WDT_LOAD_HIGH		0x4
+#define SPRD_WDT_CTRL			0x8
+#define SPRD_WDT_INT_CLR		0xc
+#define SPRD_WDT_INT_RAW		0x10
+#define SPRD_WDT_INT_MSK		0x14
+#define SPRD_WDT_CNT_LOW		0x18
+#define SPRD_WDT_CNT_HIGH		0x1c
+#define SPRD_WDT_LOCK			0x20
+#define SPRD_WDT_IRQ_LOAD_LOW		0x2c
+#define SPRD_WDT_IRQ_LOAD_HIGH		0x30
+
+/* WDT_CTRL */
+#define SPRD_WDT_INT_EN_BIT		BIT(0)
+#define SPRD_WDT_CNT_EN_BIT		BIT(1)
+#define SPRD_WDT_NEW_VER_EN		BIT(2)
+#define SPRD_WDT_RST_EN_BIT		BIT(3)
+
+/* WDT_INT_CLR */
+#define SPRD_WDT_INT_CLEAR_BIT		BIT(0)
+#define SPRD_WDT_RST_CLEAR_BIT		BIT(3)
+
+/* WDT_INT_RAW */
+#define SPRD_WDT_INT_RAW_BIT		BIT(0)
+#define SPRD_WDT_RST_RAW_BIT		BIT(3)
+#define SPRD_WDT_LD_BUSY_BIT		BIT(4)
+
+/* 1s equal to 32768 counter steps */
+#define SPRD_WDT_CNT_STEP		32768
+
+#define SPRD_WDT_UNLOCK_KEY		0xe551
+#define SPRD_WDT_MIN_TIMEOUT		3
+#define SPRD_WDT_MAX_TIMEOUT		60
+
+#define SPRD_WDT_CNT_HIGH_SHIFT		16
+#define SPRD_WDT_LOW_VALUE_MASK		GENMASK(15, 0)
+#define SPRD_WDT_LOAD_TIMEOUT		1000
+
+struct sprd_wdt {
+	void __iomem *base;
+	struct watchdog_device wdd;
+	struct clk *enable;
+	struct clk *rtc_enable;
+	int irq;
+};
+
+static inline struct sprd_wdt *to_sprd_wdt(struct watchdog_device *wdd)
+{
+	return container_of(wdd, struct sprd_wdt, wdd);
+}
+
+static inline void sprd_wdt_lock(void __iomem *addr)
+{
+	writel_relaxed(0x0, addr + SPRD_WDT_LOCK);
+}
+
+static inline void sprd_wdt_unlock(void __iomem *addr)
+{
+	writel_relaxed(SPRD_WDT_UNLOCK_KEY, addr + SPRD_WDT_LOCK);
+}
+
+static irqreturn_t sprd_wdt_isr(int irq, void *dev_id)
+{
+	struct sprd_wdt *wdt = (struct sprd_wdt *)dev_id;
+
+	sprd_wdt_unlock(wdt->base);
+	writel_relaxed(SPRD_WDT_INT_CLEAR_BIT, wdt->base + SPRD_WDT_INT_CLR);
+	sprd_wdt_lock(wdt->base);
+	watchdog_notify_pretimeout(&wdt->wdd);
+	return IRQ_HANDLED;
+}
+
+static u32 sprd_wdt_get_cnt_value(struct sprd_wdt *wdt)
+{
+	u32 val;
+
+	val = readl_relaxed(wdt->base + SPRD_WDT_CNT_HIGH) <<
+		SPRD_WDT_CNT_HIGH_SHIFT;
+	val |= readl_relaxed(wdt->base + SPRD_WDT_CNT_LOW) &
+		SPRD_WDT_LOW_VALUE_MASK;
+
+	return val;
+}
+
+static int sprd_wdt_load_value(struct sprd_wdt *wdt, u32 timeout,
+			       u32 pretimeout)
+{
+	u32 val, delay_cnt = 0;
+	u32 tmr_step = timeout * SPRD_WDT_CNT_STEP;
+	u32 prtmr_step = pretimeout * SPRD_WDT_CNT_STEP;
+
+	/*
+	 * Waiting the load value operation done,
+	 * it needs two or three RTC clock cycles.
+	 */
+	do {
+		val = readl_relaxed(wdt->base + SPRD_WDT_INT_RAW);
+		if (!(val & SPRD_WDT_LD_BUSY_BIT))
+			break;
+
+		cpu_relax();
+	} while (delay_cnt++ < SPRD_WDT_LOAD_TIMEOUT);
+
+	if (delay_cnt >= SPRD_WDT_LOAD_TIMEOUT)
+		return -EBUSY;
+
+	sprd_wdt_unlock(wdt->base);
+	writel_relaxed((tmr_step >> SPRD_WDT_CNT_HIGH_SHIFT) &
+		      SPRD_WDT_LOW_VALUE_MASK, wdt->base + SPRD_WDT_LOAD_HIGH);
+	writel_relaxed((tmr_step & SPRD_WDT_LOW_VALUE_MASK),
+		       wdt->base + SPRD_WDT_LOAD_LOW);
+	writel_relaxed((prtmr_step >> SPRD_WDT_CNT_HIGH_SHIFT) &
+			SPRD_WDT_LOW_VALUE_MASK,
+		       wdt->base + SPRD_WDT_IRQ_LOAD_HIGH);
+	writel_relaxed(prtmr_step & SPRD_WDT_LOW_VALUE_MASK,
+		       wdt->base + SPRD_WDT_IRQ_LOAD_LOW);
+	sprd_wdt_lock(wdt->base);
+
+	return 0;
+}
+
+static int sprd_wdt_enable(struct sprd_wdt *wdt)
+{
+	u32 val;
+	int ret;
+
+	ret = clk_prepare_enable(wdt->enable);
+	if (ret)
+		return ret;
+	ret = clk_prepare_enable(wdt->rtc_enable);
+	if (ret) {
+		clk_disable_unprepare(wdt->enable);
+		return ret;
+	}
+
+	sprd_wdt_unlock(wdt->base);
+	val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
+	val |= SPRD_WDT_NEW_VER_EN;
+	writel_relaxed(val, wdt->base + SPRD_WDT_CTRL);
+	sprd_wdt_lock(wdt->base);
+	return 0;
+}
+
+static void sprd_wdt_disable(void *_data)
+{
+	struct sprd_wdt *wdt = _data;
+
+	sprd_wdt_unlock(wdt->base);
+	writel_relaxed(0x0, wdt->base + SPRD_WDT_CTRL);
+	sprd_wdt_lock(wdt->base);
+
+	clk_disable_unprepare(wdt->rtc_enable);
+	clk_disable_unprepare(wdt->enable);
+}
+
+static int sprd_wdt_start(struct watchdog_device *wdd)
+{
+	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
+	u32 val;
+	int ret;
+
+	ret = sprd_wdt_load_value(wdt, wdd->timeout, wdd->pretimeout);
+	if (ret)
+		return ret;
+
+	sprd_wdt_unlock(wdt->base);
+	val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
+	val |= SPRD_WDT_CNT_EN_BIT | SPRD_WDT_INT_EN_BIT | SPRD_WDT_RST_EN_BIT;
+	writel_relaxed(val, wdt->base + SPRD_WDT_CTRL);
+	sprd_wdt_lock(wdt->base);
+	set_bit(WDOG_HW_RUNNING, &wdd->status);
+
+	return 0;
+}
+
+static int sprd_wdt_stop(struct watchdog_device *wdd)
+{
+	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
+	u32 val;
+
+	sprd_wdt_unlock(wdt->base);
+	val = readl_relaxed(wdt->base + SPRD_WDT_CTRL);
+	val &= ~(SPRD_WDT_CNT_EN_BIT | SPRD_WDT_RST_EN_BIT |
+		SPRD_WDT_INT_EN_BIT);
+	writel_relaxed(val, wdt->base + SPRD_WDT_CTRL);
+	sprd_wdt_lock(wdt->base);
+	return 0;
+}
+
+static int sprd_wdt_set_timeout(struct watchdog_device *wdd,
+				u32 timeout)
+{
+	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
+
+	if (timeout == wdd->timeout)
+		return 0;
+
+	wdd->timeout = timeout;
+
+	return sprd_wdt_load_value(wdt, timeout, wdd->pretimeout);
+}
+
+static int sprd_wdt_set_pretimeout(struct watchdog_device *wdd,
+				   u32 new_pretimeout)
+{
+	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
+
+	if (new_pretimeout < wdd->min_timeout)
+		return -EINVAL;
+
+	wdd->pretimeout = new_pretimeout;
+
+	return sprd_wdt_load_value(wdt, wdd->timeout, new_pretimeout);
+}
+
+static u32 sprd_wdt_get_timeleft(struct watchdog_device *wdd)
+{
+	struct sprd_wdt *wdt = to_sprd_wdt(wdd);
+	u32 val;
+
+	val = sprd_wdt_get_cnt_value(wdt);
+	val = val / SPRD_WDT_CNT_STEP;
+
+	return val;
+}
+
+static const struct watchdog_ops sprd_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = sprd_wdt_start,
+	.stop = sprd_wdt_stop,
+	.set_timeout = sprd_wdt_set_timeout,
+	.set_pretimeout = sprd_wdt_set_pretimeout,
+	.get_timeleft = sprd_wdt_get_timeleft,
+};
+
+static const struct watchdog_info sprd_wdt_info = {
+	.options = WDIOF_SETTIMEOUT |
+		   WDIOF_PRETIMEOUT |
+		   WDIOF_MAGICCLOSE |
+		   WDIOF_KEEPALIVEPING,
+	.identity = "Spreadtrum Watchdog Timer",
+};
+
+static int sprd_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *wdt_res;
+	struct sprd_wdt *wdt;
+	int ret;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdt_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->base = devm_ioremap_resource(&pdev->dev, wdt_res);
+	if (IS_ERR(wdt->base))
+		return PTR_ERR(wdt->base);
+
+	wdt->enable = devm_clk_get(&pdev->dev, "enable");
+	if (IS_ERR(wdt->enable)) {
+		dev_err(&pdev->dev, "can't get the enable clock\n");
+		return PTR_ERR(wdt->enable);
+	}
+
+	wdt->rtc_enable = devm_clk_get(&pdev->dev, "rtc_enable");
+	if (IS_ERR(wdt->rtc_enable)) {
+		dev_err(&pdev->dev, "can't get the rtc enable clock\n");
+		return PTR_ERR(wdt->rtc_enable);
+	}
+
+	wdt->irq = platform_get_irq(pdev, 0);
+	if (wdt->irq < 0) {
+		dev_err(&pdev->dev, "failed to get IRQ resource\n");
+		return wdt->irq;
+	}
+
+	ret = devm_request_irq(&pdev->dev, wdt->irq, sprd_wdt_isr,
+			       IRQF_NO_SUSPEND, "sprd-wdt", (void *)wdt);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register irq\n");
+		return ret;
+	}
+
+	wdt->wdd.info = &sprd_wdt_info;
+	wdt->wdd.ops = &sprd_wdt_ops;
+	wdt->wdd.parent = &pdev->dev;
+	wdt->wdd.min_timeout = SPRD_WDT_MIN_TIMEOUT;
+	wdt->wdd.max_timeout = SPRD_WDT_MAX_TIMEOUT;
+	wdt->wdd.timeout = SPRD_WDT_MAX_TIMEOUT;
+
+	ret = sprd_wdt_enable(wdt);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable wdt\n");
+		return ret;
+	}
+	ret = devm_add_action(&pdev->dev, sprd_wdt_disable, wdt);
+	if (ret) {
+		sprd_wdt_disable(wdt);
+		dev_err(&pdev->dev, "Failed to add wdt disable action\n");
+		return ret;
+	}
+
+	watchdog_set_nowayout(&wdt->wdd, WATCHDOG_NOWAYOUT);
+	watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev);
+
+	ret = devm_watchdog_register_device(&pdev->dev, &wdt->wdd);
+	if (ret) {
+		sprd_wdt_disable(wdt);
+		dev_err(&pdev->dev, "failed to register watchdog\n");
+		return ret;
+	}
+	platform_set_drvdata(pdev, wdt);
+
+	return 0;
+}
+
+static int __maybe_unused sprd_wdt_pm_suspend(struct device *dev)
+{
+	struct sprd_wdt *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->wdd))
+		sprd_wdt_stop(&wdt->wdd);
+	sprd_wdt_disable(wdt);
+
+	return 0;
+}
+
+static int __maybe_unused sprd_wdt_pm_resume(struct device *dev)
+{
+	struct sprd_wdt *wdt = dev_get_drvdata(dev);
+	int ret;
+
+	ret = sprd_wdt_enable(wdt);
+	if (ret)
+		return ret;
+
+	if (watchdog_active(&wdt->wdd))
+		ret = sprd_wdt_start(&wdt->wdd);
+
+	return ret;
+}
+
+static const struct dev_pm_ops sprd_wdt_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(sprd_wdt_pm_suspend,
+				sprd_wdt_pm_resume)
+};
+
+static const struct of_device_id sprd_wdt_match_table[] = {
+	{ .compatible = "sprd,sp9860-wdt", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sprd_wdt_match_table);
+
+static struct platform_driver sprd_watchdog_driver = {
+	.probe	= sprd_wdt_probe,
+	.driver	= {
+		.name = "sprd-wdt",
+		.of_match_table = sprd_wdt_match_table,
+		.pm = &sprd_wdt_pm_ops,
+	},
+};
+module_platform_driver(sprd_watchdog_driver);
+
+MODULE_AUTHOR("Eric Long <eric.long@spreadtrum.com>");
+MODULE_DESCRIPTION("Spreadtrum Watchdog Timer Controller Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/watchdog/st_lpc_wdt.c b/drivers/watchdog/st_lpc_wdt.c
new file mode 100644
index 000000000..177829b37
--- /dev/null
+++ b/drivers/watchdog/st_lpc_wdt.c
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ST's LPC Watchdog
+ *
+ * Copyright (C) 2014 STMicroelectronics -- All Rights Reserved
+ *
+ * Author: David Paris <david.paris@st.com> for STMicroelectronics
+ *         Lee Jones <lee.jones@linaro.org> for STMicroelectronics
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/watchdog.h>
+
+#include <dt-bindings/mfd/st-lpc.h>
+
+/* Low Power Alarm */
+#define LPC_LPA_LSB_OFF			0x410
+#define LPC_LPA_START_OFF		0x418
+
+/* LPC as WDT */
+#define LPC_WDT_OFF			0x510
+
+static struct watchdog_device st_wdog_dev;
+
+struct st_wdog_syscfg {
+	unsigned int reset_type_reg;
+	unsigned int reset_type_mask;
+	unsigned int enable_reg;
+	unsigned int enable_mask;
+};
+
+struct st_wdog {
+	void __iomem *base;
+	struct device *dev;
+	struct regmap *regmap;
+	struct st_wdog_syscfg *syscfg;
+	struct clk *clk;
+	unsigned long clkrate;
+	bool warm_reset;
+};
+
+static struct st_wdog_syscfg stih407_syscfg = {
+	.enable_reg		= 0x204,
+	.enable_mask		= BIT(19),
+};
+
+static const struct of_device_id st_wdog_match[] = {
+	{
+		.compatible = "st,stih407-lpc",
+		.data = &stih407_syscfg,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, st_wdog_match);
+
+static void st_wdog_setup(struct st_wdog *st_wdog, bool enable)
+{
+	/* Type of watchdog reset - 0: Cold 1: Warm */
+	if (st_wdog->syscfg->reset_type_reg)
+		regmap_update_bits(st_wdog->regmap,
+				   st_wdog->syscfg->reset_type_reg,
+				   st_wdog->syscfg->reset_type_mask,
+				   st_wdog->warm_reset);
+
+	/* Mask/unmask watchdog reset */
+	regmap_update_bits(st_wdog->regmap,
+			   st_wdog->syscfg->enable_reg,
+			   st_wdog->syscfg->enable_mask,
+			   enable ? 0 : st_wdog->syscfg->enable_mask);
+}
+
+static void st_wdog_load_timer(struct st_wdog *st_wdog, unsigned int timeout)
+{
+	unsigned long clkrate = st_wdog->clkrate;
+
+	writel_relaxed(timeout * clkrate, st_wdog->base + LPC_LPA_LSB_OFF);
+	writel_relaxed(1, st_wdog->base + LPC_LPA_START_OFF);
+}
+
+static int st_wdog_start(struct watchdog_device *wdd)
+{
+	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
+
+	writel_relaxed(1, st_wdog->base + LPC_WDT_OFF);
+
+	return 0;
+}
+
+static int st_wdog_stop(struct watchdog_device *wdd)
+{
+	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
+
+	writel_relaxed(0, st_wdog->base + LPC_WDT_OFF);
+
+	return 0;
+}
+
+static int st_wdog_set_timeout(struct watchdog_device *wdd,
+			       unsigned int timeout)
+{
+	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
+
+	wdd->timeout = timeout;
+	st_wdog_load_timer(st_wdog, timeout);
+
+	return 0;
+}
+
+static int st_wdog_keepalive(struct watchdog_device *wdd)
+{
+	struct st_wdog *st_wdog = watchdog_get_drvdata(wdd);
+
+	st_wdog_load_timer(st_wdog, wdd->timeout);
+
+	return 0;
+}
+
+static const struct watchdog_info st_wdog_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "ST LPC WDT",
+};
+
+static const struct watchdog_ops st_wdog_ops = {
+	.owner		= THIS_MODULE,
+	.start		= st_wdog_start,
+	.stop		= st_wdog_stop,
+	.ping		= st_wdog_keepalive,
+	.set_timeout	= st_wdog_set_timeout,
+};
+
+static struct watchdog_device st_wdog_dev = {
+	.info		= &st_wdog_info,
+	.ops		= &st_wdog_ops,
+};
+
+static int st_wdog_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct device_node *np = pdev->dev.of_node;
+	struct st_wdog *st_wdog;
+	struct regmap *regmap;
+	struct resource *res;
+	struct clk *clk;
+	void __iomem *base;
+	uint32_t mode;
+	int ret;
+
+	ret = of_property_read_u32(np, "st,lpc-mode", &mode);
+	if (ret) {
+		dev_err(&pdev->dev, "An LPC mode must be provided\n");
+		return -EINVAL;
+	}
+
+	/* LPC can either run as a Clocksource or in RTC or WDT mode */
+	if (mode != ST_LPC_MODE_WDT)
+		return -ENODEV;
+
+	st_wdog = devm_kzalloc(&pdev->dev, sizeof(*st_wdog), GFP_KERNEL);
+	if (!st_wdog)
+		return -ENOMEM;
+
+	match = of_match_device(st_wdog_match, &pdev->dev);
+	if (!match) {
+		dev_err(&pdev->dev, "Couldn't match device\n");
+		return -ENODEV;
+	}
+	st_wdog->syscfg	= (struct st_wdog_syscfg *)match->data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+	if (IS_ERR(regmap)) {
+		dev_err(&pdev->dev, "No syscfg phandle specified\n");
+		return PTR_ERR(regmap);
+	}
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Unable to request clock\n");
+		return PTR_ERR(clk);
+	}
+
+	st_wdog->dev		= &pdev->dev;
+	st_wdog->base		= base;
+	st_wdog->clk		= clk;
+	st_wdog->regmap		= regmap;
+	st_wdog->warm_reset	= of_property_read_bool(np, "st,warm_reset");
+	st_wdog->clkrate	= clk_get_rate(st_wdog->clk);
+
+	if (!st_wdog->clkrate) {
+		dev_err(&pdev->dev, "Unable to fetch clock rate\n");
+		return -EINVAL;
+	}
+	st_wdog_dev.max_timeout = 0xFFFFFFFF / st_wdog->clkrate;
+	st_wdog_dev.parent = &pdev->dev;
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable clock\n");
+		return ret;
+	}
+
+	watchdog_set_drvdata(&st_wdog_dev, st_wdog);
+	watchdog_set_nowayout(&st_wdog_dev, WATCHDOG_NOWAYOUT);
+
+	/* Init Watchdog timeout with value in DT */
+	ret = watchdog_init_timeout(&st_wdog_dev, 0, &pdev->dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to initialise watchdog timeout\n");
+		clk_disable_unprepare(clk);
+		return ret;
+	}
+
+	ret = watchdog_register_device(&st_wdog_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to register watchdog\n");
+		clk_disable_unprepare(clk);
+		return ret;
+	}
+
+	st_wdog_setup(st_wdog, true);
+
+	dev_info(&pdev->dev, "LPC Watchdog driver registered, reset type is %s",
+		 st_wdog->warm_reset ? "warm" : "cold");
+
+	return ret;
+}
+
+static int st_wdog_remove(struct platform_device *pdev)
+{
+	struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev);
+
+	st_wdog_setup(st_wdog, false);
+	watchdog_unregister_device(&st_wdog_dev);
+	clk_disable_unprepare(st_wdog->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int st_wdog_suspend(struct device *dev)
+{
+	struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev);
+
+	if (watchdog_active(&st_wdog_dev))
+		st_wdog_stop(&st_wdog_dev);
+
+	st_wdog_setup(st_wdog, false);
+
+	clk_disable(st_wdog->clk);
+
+	return 0;
+}
+
+static int st_wdog_resume(struct device *dev)
+{
+	struct st_wdog *st_wdog = watchdog_get_drvdata(&st_wdog_dev);
+	int ret;
+
+	ret = clk_enable(st_wdog->clk);
+	if (ret) {
+		dev_err(dev, "Unable to re-enable clock\n");
+		watchdog_unregister_device(&st_wdog_dev);
+		clk_unprepare(st_wdog->clk);
+		return ret;
+	}
+
+	st_wdog_setup(st_wdog, true);
+
+	if (watchdog_active(&st_wdog_dev)) {
+		st_wdog_load_timer(st_wdog, st_wdog_dev.timeout);
+		st_wdog_start(&st_wdog_dev);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(st_wdog_pm_ops,
+			 st_wdog_suspend,
+			 st_wdog_resume);
+
+static struct platform_driver st_wdog_driver = {
+	.driver	= {
+		.name = "st-lpc-wdt",
+		.pm = &st_wdog_pm_ops,
+		.of_match_table = st_wdog_match,
+	},
+	.probe = st_wdog_probe,
+	.remove = st_wdog_remove,
+};
+module_platform_driver(st_wdog_driver);
+
+MODULE_AUTHOR("David Paris <david.paris@st.com>");
+MODULE_DESCRIPTION("ST LPC Watchdog Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/stm32_iwdg.c b/drivers/watchdog/stm32_iwdg.c
new file mode 100644
index 000000000..e00e3b352
--- /dev/null
+++ b/drivers/watchdog/stm32_iwdg.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for STM32 Independent Watchdog
+ *
+ * Copyright (C) STMicroelectronics 2017
+ * Author: Yannick Fertre <yannick.fertre@st.com> for STMicroelectronics.
+ *
+ * This driver is based on tegra_wdt.c
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+/* IWDG registers */
+#define IWDG_KR		0x00 /* Key register */
+#define IWDG_PR		0x04 /* Prescaler Register */
+#define IWDG_RLR	0x08 /* ReLoad Register */
+#define IWDG_SR		0x0C /* Status Register */
+#define IWDG_WINR	0x10 /* Windows Register */
+
+/* IWDG_KR register bit mask */
+#define KR_KEY_RELOAD	0xAAAA /* reload counter enable */
+#define KR_KEY_ENABLE	0xCCCC /* peripheral enable */
+#define KR_KEY_EWA	0x5555 /* write access enable */
+#define KR_KEY_DWA	0x0000 /* write access disable */
+
+/* IWDG_PR register bit values */
+#define PR_4		0x00 /* prescaler set to 4 */
+#define PR_8		0x01 /* prescaler set to 8 */
+#define PR_16		0x02 /* prescaler set to 16 */
+#define PR_32		0x03 /* prescaler set to 32 */
+#define PR_64		0x04 /* prescaler set to 64 */
+#define PR_128		0x05 /* prescaler set to 128 */
+#define PR_256		0x06 /* prescaler set to 256 */
+
+/* IWDG_RLR register values */
+#define RLR_MIN		0x07C /* min value supported by reload register */
+#define RLR_MAX		0xFFF /* max value supported by reload register */
+
+/* IWDG_SR register bit mask */
+#define FLAG_PVU	BIT(0) /* Watchdog prescaler value update */
+#define FLAG_RVU	BIT(1) /* Watchdog counter reload value update */
+
+/* set timeout to 100000 us */
+#define TIMEOUT_US	100000
+#define SLEEP_US	1000
+
+#define HAS_PCLK	true
+
+struct stm32_iwdg {
+	struct watchdog_device	wdd;
+	void __iomem		*regs;
+	struct clk		*clk_lsi;
+	struct clk		*clk_pclk;
+	unsigned int		rate;
+	bool			has_pclk;
+};
+
+static inline u32 reg_read(void __iomem *base, u32 reg)
+{
+	return readl_relaxed(base + reg);
+}
+
+static inline void reg_write(void __iomem *base, u32 reg, u32 val)
+{
+	writel_relaxed(val, base + reg);
+}
+
+static int stm32_iwdg_start(struct watchdog_device *wdd)
+{
+	struct stm32_iwdg *wdt = watchdog_get_drvdata(wdd);
+	u32 val = FLAG_PVU | FLAG_RVU;
+	u32 reload;
+	int ret;
+
+	dev_dbg(wdd->parent, "%s\n", __func__);
+
+	/* prescaler fixed to 256 */
+	reload = clamp_t(unsigned int, ((wdd->timeout * wdt->rate) / 256) - 1,
+			 RLR_MIN, RLR_MAX);
+
+	/* enable write access */
+	reg_write(wdt->regs, IWDG_KR, KR_KEY_EWA);
+
+	/* set prescaler & reload registers */
+	reg_write(wdt->regs, IWDG_PR, PR_256); /* prescaler fix to 256 */
+	reg_write(wdt->regs, IWDG_RLR, reload);
+	reg_write(wdt->regs, IWDG_KR, KR_KEY_ENABLE);
+
+	/* wait for the registers to be updated (max 100ms) */
+	ret = readl_relaxed_poll_timeout(wdt->regs + IWDG_SR, val,
+					 !(val & (FLAG_PVU | FLAG_RVU)),
+					 SLEEP_US, TIMEOUT_US);
+	if (ret) {
+		dev_err(wdd->parent,
+			"Fail to set prescaler or reload registers\n");
+		return ret;
+	}
+
+	/* reload watchdog */
+	reg_write(wdt->regs, IWDG_KR, KR_KEY_RELOAD);
+
+	return 0;
+}
+
+static int stm32_iwdg_ping(struct watchdog_device *wdd)
+{
+	struct stm32_iwdg *wdt = watchdog_get_drvdata(wdd);
+
+	dev_dbg(wdd->parent, "%s\n", __func__);
+
+	/* reload watchdog */
+	reg_write(wdt->regs, IWDG_KR, KR_KEY_RELOAD);
+
+	return 0;
+}
+
+static int stm32_iwdg_set_timeout(struct watchdog_device *wdd,
+				  unsigned int timeout)
+{
+	dev_dbg(wdd->parent, "%s timeout: %d sec\n", __func__, timeout);
+
+	wdd->timeout = timeout;
+
+	if (watchdog_active(wdd))
+		return stm32_iwdg_start(wdd);
+
+	return 0;
+}
+
+static int stm32_iwdg_clk_init(struct platform_device *pdev,
+			       struct stm32_iwdg *wdt)
+{
+	u32 ret;
+
+	wdt->clk_lsi = devm_clk_get(&pdev->dev, "lsi");
+	if (IS_ERR(wdt->clk_lsi)) {
+		dev_err(&pdev->dev, "Unable to get lsi clock\n");
+		return PTR_ERR(wdt->clk_lsi);
+	}
+
+	/* optional peripheral clock */
+	if (wdt->has_pclk) {
+		wdt->clk_pclk = devm_clk_get(&pdev->dev, "pclk");
+		if (IS_ERR(wdt->clk_pclk)) {
+			dev_err(&pdev->dev, "Unable to get pclk clock\n");
+			return PTR_ERR(wdt->clk_pclk);
+		}
+
+		ret = clk_prepare_enable(wdt->clk_pclk);
+		if (ret) {
+			dev_err(&pdev->dev, "Unable to prepare pclk clock\n");
+			return ret;
+		}
+	}
+
+	ret = clk_prepare_enable(wdt->clk_lsi);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to prepare lsi clock\n");
+		clk_disable_unprepare(wdt->clk_pclk);
+		return ret;
+	}
+
+	wdt->rate = clk_get_rate(wdt->clk_lsi);
+
+	return 0;
+}
+
+static const struct watchdog_info stm32_iwdg_info = {
+	.options	= WDIOF_SETTIMEOUT |
+			  WDIOF_MAGICCLOSE |
+			  WDIOF_KEEPALIVEPING,
+	.identity	= "STM32 Independent Watchdog",
+};
+
+static const struct watchdog_ops stm32_iwdg_ops = {
+	.owner		= THIS_MODULE,
+	.start		= stm32_iwdg_start,
+	.ping		= stm32_iwdg_ping,
+	.set_timeout	= stm32_iwdg_set_timeout,
+};
+
+static const struct of_device_id stm32_iwdg_of_match[] = {
+	{ .compatible = "st,stm32-iwdg", .data = (void *)!HAS_PCLK },
+	{ .compatible = "st,stm32mp1-iwdg", .data = (void *)HAS_PCLK },
+	{ /* end node */ }
+};
+MODULE_DEVICE_TABLE(of, stm32_iwdg_of_match);
+
+static int stm32_iwdg_probe(struct platform_device *pdev)
+{
+	struct watchdog_device *wdd;
+	const struct of_device_id *match;
+	struct stm32_iwdg *wdt;
+	struct resource *res;
+	int ret;
+
+	match = of_match_device(stm32_iwdg_of_match, &pdev->dev);
+	if (!match)
+		return -ENODEV;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdt->has_pclk = match->data;
+
+	/* This is the timer base. */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(wdt->regs)) {
+		dev_err(&pdev->dev, "Could not get resource\n");
+		return PTR_ERR(wdt->regs);
+	}
+
+	ret = stm32_iwdg_clk_init(pdev, wdt);
+	if (ret)
+		return ret;
+
+	/* Initialize struct watchdog_device. */
+	wdd = &wdt->wdd;
+	wdd->info = &stm32_iwdg_info;
+	wdd->ops = &stm32_iwdg_ops;
+	wdd->min_timeout = ((RLR_MIN + 1) * 256) / wdt->rate;
+	wdd->max_hw_heartbeat_ms = ((RLR_MAX + 1) * 256 * 1000) / wdt->rate;
+	wdd->parent = &pdev->dev;
+
+	watchdog_set_drvdata(wdd, wdt);
+	watchdog_set_nowayout(wdd, WATCHDOG_NOWAYOUT);
+
+	ret = watchdog_init_timeout(wdd, 0, &pdev->dev);
+	if (ret)
+		dev_warn(&pdev->dev,
+			 "unable to set timeout value, using default\n");
+
+	ret = watchdog_register_device(wdd);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register watchdog device\n");
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, wdt);
+
+	return 0;
+err:
+	clk_disable_unprepare(wdt->clk_lsi);
+	clk_disable_unprepare(wdt->clk_pclk);
+
+	return ret;
+}
+
+static int stm32_iwdg_remove(struct platform_device *pdev)
+{
+	struct stm32_iwdg *wdt = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&wdt->wdd);
+	clk_disable_unprepare(wdt->clk_lsi);
+	clk_disable_unprepare(wdt->clk_pclk);
+
+	return 0;
+}
+
+static struct platform_driver stm32_iwdg_driver = {
+	.probe		= stm32_iwdg_probe,
+	.remove		= stm32_iwdg_remove,
+	.driver = {
+		.name	= "iwdg",
+		.of_match_table = of_match_ptr(stm32_iwdg_of_match),
+	},
+};
+module_platform_driver(stm32_iwdg_driver);
+
+MODULE_AUTHOR("Yannick Fertre <yannick.fertre@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 Independent Watchdog Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/watchdog/stmp3xxx_rtc_wdt.c b/drivers/watchdog/stmp3xxx_rtc_wdt.c
new file mode 100644
index 000000000..994c54cc6
--- /dev/null
+++ b/drivers/watchdog/stmp3xxx_rtc_wdt.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Watchdog driver for the RTC based watchdog in STMP3xxx and i.MX23/28
+ *
+ * Author: Wolfram Sang <kernel@pengutronix.de>
+ *
+ * Copyright (C) 2011-12 Wolfram Sang, Pengutronix
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/stmp3xxx_rtc_wdt.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+
+#define WDOG_TICK_RATE 1000 /* 1 kHz clock */
+#define STMP3XXX_DEFAULT_TIMEOUT 19
+#define STMP3XXX_MAX_TIMEOUT (UINT_MAX / WDOG_TICK_RATE)
+
+static int heartbeat = STMP3XXX_DEFAULT_TIMEOUT;
+module_param(heartbeat, uint, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat period in seconds from 1 to "
+		 __MODULE_STRING(STMP3XXX_MAX_TIMEOUT) ", default "
+		 __MODULE_STRING(STMP3XXX_DEFAULT_TIMEOUT));
+
+static int wdt_start(struct watchdog_device *wdd)
+{
+	struct device *dev = watchdog_get_drvdata(wdd);
+	struct stmp3xxx_wdt_pdata *pdata = dev_get_platdata(dev);
+
+	pdata->wdt_set_timeout(dev->parent, wdd->timeout * WDOG_TICK_RATE);
+	return 0;
+}
+
+static int wdt_stop(struct watchdog_device *wdd)
+{
+	struct device *dev = watchdog_get_drvdata(wdd);
+	struct stmp3xxx_wdt_pdata *pdata = dev_get_platdata(dev);
+
+	pdata->wdt_set_timeout(dev->parent, 0);
+	return 0;
+}
+
+static int wdt_set_timeout(struct watchdog_device *wdd, unsigned new_timeout)
+{
+	wdd->timeout = new_timeout;
+	return wdt_start(wdd);
+}
+
+static const struct watchdog_info stmp3xxx_wdt_ident = {
+	.options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.identity = "STMP3XXX RTC Watchdog",
+};
+
+static const struct watchdog_ops stmp3xxx_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = wdt_start,
+	.stop = wdt_stop,
+	.set_timeout = wdt_set_timeout,
+};
+
+static struct watchdog_device stmp3xxx_wdd = {
+	.info = &stmp3xxx_wdt_ident,
+	.ops = &stmp3xxx_wdt_ops,
+	.min_timeout = 1,
+	.max_timeout = STMP3XXX_MAX_TIMEOUT,
+	.status = WATCHDOG_NOWAYOUT_INIT_STATUS,
+};
+
+static int wdt_notify_sys(struct notifier_block *nb, unsigned long code,
+			  void *unused)
+{
+	switch (code) {
+	case SYS_DOWN:	/* keep enabled, system might crash while going down */
+		break;
+	case SYS_HALT:	/* allow the system to actually halt */
+	case SYS_POWER_OFF:
+		wdt_stop(&stmp3xxx_wdd);
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block wdt_notifier = {
+	.notifier_call = wdt_notify_sys,
+};
+
+static int stmp3xxx_wdt_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	watchdog_set_drvdata(&stmp3xxx_wdd, &pdev->dev);
+
+	stmp3xxx_wdd.timeout = clamp_t(unsigned, heartbeat, 1, STMP3XXX_MAX_TIMEOUT);
+	stmp3xxx_wdd.parent = &pdev->dev;
+
+	ret = watchdog_register_device(&stmp3xxx_wdd);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "cannot register watchdog device\n");
+		return ret;
+	}
+
+	if (register_reboot_notifier(&wdt_notifier))
+		dev_warn(&pdev->dev, "cannot register reboot notifier\n");
+
+	dev_info(&pdev->dev, "initialized watchdog with heartbeat %ds\n",
+			stmp3xxx_wdd.timeout);
+	return 0;
+}
+
+static int stmp3xxx_wdt_remove(struct platform_device *pdev)
+{
+	unregister_reboot_notifier(&wdt_notifier);
+	watchdog_unregister_device(&stmp3xxx_wdd);
+	return 0;
+}
+
+static int __maybe_unused stmp3xxx_wdt_suspend(struct device *dev)
+{
+	struct watchdog_device *wdd = &stmp3xxx_wdd;
+
+	if (watchdog_active(wdd))
+		return wdt_stop(wdd);
+
+	return 0;
+}
+
+static int __maybe_unused stmp3xxx_wdt_resume(struct device *dev)
+{
+	struct watchdog_device *wdd = &stmp3xxx_wdd;
+
+	if (watchdog_active(wdd))
+		return wdt_start(wdd);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(stmp3xxx_wdt_pm_ops,
+			 stmp3xxx_wdt_suspend, stmp3xxx_wdt_resume);
+
+static struct platform_driver stmp3xxx_wdt_driver = {
+	.driver = {
+		.name = "stmp3xxx_rtc_wdt",
+		.pm = &stmp3xxx_wdt_pm_ops,
+	},
+	.probe = stmp3xxx_wdt_probe,
+	.remove = stmp3xxx_wdt_remove,
+};
+module_platform_driver(stmp3xxx_wdt_driver);
+
+MODULE_DESCRIPTION("STMP3XXX RTC Watchdog Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Wolfram Sang <kernel@pengutronix.de>");
diff --git a/drivers/watchdog/sun4v_wdt.c b/drivers/watchdog/sun4v_wdt.c
new file mode 100644
index 000000000..009079736
--- /dev/null
+++ b/drivers/watchdog/sun4v_wdt.c
@@ -0,0 +1,191 @@
+/*
+ *	sun4v watchdog timer
+ *	(c) Copyright 2016 Oracle Corporation
+ *
+ *	Implement a simple watchdog driver using the built-in sun4v hypervisor
+ *	watchdog support. If time expires, the hypervisor stops or bounces
+ *	the guest domain.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/watchdog.h>
+#include <asm/hypervisor.h>
+#include <asm/mdesc.h>
+
+#define WDT_TIMEOUT			60
+#define WDT_MAX_TIMEOUT			31536000
+#define WDT_MIN_TIMEOUT			1
+#define WDT_DEFAULT_RESOLUTION_MS	1000	/* 1 second */
+
+static unsigned int timeout;
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default="
+	__MODULE_STRING(WDT_TIMEOUT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, S_IRUGO);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int sun4v_wdt_stop(struct watchdog_device *wdd)
+{
+	sun4v_mach_set_watchdog(0, NULL);
+
+	return 0;
+}
+
+static int sun4v_wdt_ping(struct watchdog_device *wdd)
+{
+	int hverr;
+
+	/*
+	 * HV watchdog timer will round up the timeout
+	 * passed in to the nearest multiple of the
+	 * watchdog resolution in milliseconds.
+	 */
+	hverr = sun4v_mach_set_watchdog(wdd->timeout * 1000, NULL);
+	if (hverr == HV_EINVAL)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int sun4v_wdt_set_timeout(struct watchdog_device *wdd,
+				 unsigned int timeout)
+{
+	wdd->timeout = timeout;
+
+	return 0;
+}
+
+static const struct watchdog_info sun4v_wdt_ident = {
+	.options =	WDIOF_SETTIMEOUT |
+			WDIOF_MAGICCLOSE |
+			WDIOF_KEEPALIVEPING,
+	.identity =	"sun4v hypervisor watchdog",
+	.firmware_version = 0,
+};
+
+static const struct watchdog_ops sun4v_wdt_ops = {
+	.owner =	THIS_MODULE,
+	.start =	sun4v_wdt_ping,
+	.stop =		sun4v_wdt_stop,
+	.ping =		sun4v_wdt_ping,
+	.set_timeout =	sun4v_wdt_set_timeout,
+};
+
+static struct watchdog_device wdd = {
+	.info = &sun4v_wdt_ident,
+	.ops = &sun4v_wdt_ops,
+	.min_timeout = WDT_MIN_TIMEOUT,
+	.max_timeout = WDT_MAX_TIMEOUT,
+	.timeout = WDT_TIMEOUT,
+};
+
+static int __init sun4v_wdt_init(void)
+{
+	struct mdesc_handle *handle;
+	u64 node;
+	const u64 *value;
+	int err = 0;
+	unsigned long major = 1, minor = 1;
+
+	/*
+	 * There are 2 properties that can be set from the control
+	 * domain for the watchdog.
+	 * watchdog-resolution
+	 * watchdog-max-timeout
+	 *
+	 * We can expect a handle to be returned otherwise something
+	 * serious is wrong. Correct to return -ENODEV here.
+	 */
+
+	handle = mdesc_grab();
+	if (!handle)
+		return -ENODEV;
+
+	node = mdesc_node_by_name(handle, MDESC_NODE_NULL, "platform");
+	err = -ENODEV;
+	if (node == MDESC_NODE_NULL)
+		goto out_release;
+
+	/*
+	 * This is a safe way to validate if we are on the right
+	 * platform.
+	 */
+	if (sun4v_hvapi_register(HV_GRP_CORE, major, &minor))
+		goto out_hv_unreg;
+
+	/* Allow value of watchdog-resolution up to 1s (default) */
+	value = mdesc_get_property(handle, node, "watchdog-resolution", NULL);
+	err = -EINVAL;
+	if (value) {
+		if (*value == 0 ||
+		    *value > WDT_DEFAULT_RESOLUTION_MS)
+			goto out_hv_unreg;
+	}
+
+	value = mdesc_get_property(handle, node, "watchdog-max-timeout", NULL);
+	if (value) {
+		/*
+		 * If the property value (in ms) is smaller than
+		 * min_timeout, return -EINVAL.
+		 */
+		if (*value < wdd.min_timeout * 1000)
+			goto out_hv_unreg;
+
+		/*
+		 * If the property value is smaller than
+		 * default max_timeout  then set watchdog max_timeout to
+		 * the value of the property in seconds.
+		 */
+		if (*value < wdd.max_timeout * 1000)
+			wdd.max_timeout = *value  / 1000;
+	}
+
+	watchdog_init_timeout(&wdd, timeout, NULL);
+
+	watchdog_set_nowayout(&wdd, nowayout);
+
+	err = watchdog_register_device(&wdd);
+	if (err)
+		goto out_hv_unreg;
+
+	pr_info("initialized (timeout=%ds, nowayout=%d)\n",
+		 wdd.timeout, nowayout);
+
+	mdesc_release(handle);
+
+	return 0;
+
+out_hv_unreg:
+	sun4v_hvapi_unregister(HV_GRP_CORE);
+
+out_release:
+	mdesc_release(handle);
+	return err;
+}
+
+static void __exit sun4v_wdt_exit(void)
+{
+	sun4v_hvapi_unregister(HV_GRP_CORE);
+	watchdog_unregister_device(&wdd);
+}
+
+module_init(sun4v_wdt_init);
+module_exit(sun4v_wdt_exit);
+
+MODULE_AUTHOR("Wim Coekaerts <wim.coekaerts@oracle.com>");
+MODULE_DESCRIPTION("sun4v watchdog driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/sunxi_wdt.c b/drivers/watchdog/sunxi_wdt.c
new file mode 100644
index 000000000..c6c736569
--- /dev/null
+++ b/drivers/watchdog/sunxi_wdt.c
@@ -0,0 +1,300 @@
+/*
+ *      sunxi Watchdog Driver
+ *
+ *      Copyright (c) 2013 Carlo Caione
+ *                    2012 Henrik Nordstrom
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ *      Based on xen_wdt.c
+ *      (c) Copyright 2010 Novell, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+#define WDT_MAX_TIMEOUT         16
+#define WDT_MIN_TIMEOUT         1
+#define WDT_TIMEOUT_MASK        0x0F
+
+#define WDT_CTRL_RELOAD         ((1 << 0) | (0x0a57 << 1))
+
+#define WDT_MODE_EN             (1 << 0)
+
+#define DRV_NAME		"sunxi-wdt"
+#define DRV_VERSION		"1.0"
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static unsigned int timeout;
+
+/*
+ * This structure stores the register offsets for different variants
+ * of Allwinner's watchdog hardware.
+ */
+struct sunxi_wdt_reg {
+	u8 wdt_ctrl;
+	u8 wdt_cfg;
+	u8 wdt_mode;
+	u8 wdt_timeout_shift;
+	u8 wdt_reset_mask;
+	u8 wdt_reset_val;
+};
+
+struct sunxi_wdt_dev {
+	struct watchdog_device wdt_dev;
+	void __iomem *wdt_base;
+	const struct sunxi_wdt_reg *wdt_regs;
+};
+
+/*
+ * wdt_timeout_map maps the watchdog timer interval value in seconds to
+ * the value of the register WDT_MODE at bits .wdt_timeout_shift ~ +3
+ *
+ * [timeout seconds] = register value
+ *
+ */
+
+static const int wdt_timeout_map[] = {
+	[1] = 0x1,  /* 1s  */
+	[2] = 0x2,  /* 2s  */
+	[3] = 0x3,  /* 3s  */
+	[4] = 0x4,  /* 4s  */
+	[5] = 0x5,  /* 5s  */
+	[6] = 0x6,  /* 6s  */
+	[8] = 0x7,  /* 8s  */
+	[10] = 0x8, /* 10s */
+	[12] = 0x9, /* 12s */
+	[14] = 0xA, /* 14s */
+	[16] = 0xB, /* 16s */
+};
+
+
+static int sunxi_wdt_restart(struct watchdog_device *wdt_dev,
+			     unsigned long action, void *data)
+{
+	struct sunxi_wdt_dev *sunxi_wdt = watchdog_get_drvdata(wdt_dev);
+	void __iomem *wdt_base = sunxi_wdt->wdt_base;
+	const struct sunxi_wdt_reg *regs = sunxi_wdt->wdt_regs;
+	u32 val;
+
+	/* Set system reset function */
+	val = readl(wdt_base + regs->wdt_cfg);
+	val &= ~(regs->wdt_reset_mask);
+	val |= regs->wdt_reset_val;
+	writel(val, wdt_base + regs->wdt_cfg);
+
+	/* Set lowest timeout and enable watchdog */
+	val = readl(wdt_base + regs->wdt_mode);
+	val &= ~(WDT_TIMEOUT_MASK << regs->wdt_timeout_shift);
+	val |= WDT_MODE_EN;
+	writel(val, wdt_base + regs->wdt_mode);
+
+	/*
+	 * Restart the watchdog. The default (and lowest) interval
+	 * value for the watchdog is 0.5s.
+	 */
+	writel(WDT_CTRL_RELOAD, wdt_base + regs->wdt_ctrl);
+
+	while (1) {
+		mdelay(5);
+		val = readl(wdt_base + regs->wdt_mode);
+		val |= WDT_MODE_EN;
+		writel(val, wdt_base + regs->wdt_mode);
+	}
+	return 0;
+}
+
+static int sunxi_wdt_ping(struct watchdog_device *wdt_dev)
+{
+	struct sunxi_wdt_dev *sunxi_wdt = watchdog_get_drvdata(wdt_dev);
+	void __iomem *wdt_base = sunxi_wdt->wdt_base;
+	const struct sunxi_wdt_reg *regs = sunxi_wdt->wdt_regs;
+
+	writel(WDT_CTRL_RELOAD, wdt_base + regs->wdt_ctrl);
+
+	return 0;
+}
+
+static int sunxi_wdt_set_timeout(struct watchdog_device *wdt_dev,
+		unsigned int timeout)
+{
+	struct sunxi_wdt_dev *sunxi_wdt = watchdog_get_drvdata(wdt_dev);
+	void __iomem *wdt_base = sunxi_wdt->wdt_base;
+	const struct sunxi_wdt_reg *regs = sunxi_wdt->wdt_regs;
+	u32 reg;
+
+	if (wdt_timeout_map[timeout] == 0)
+		timeout++;
+
+	sunxi_wdt->wdt_dev.timeout = timeout;
+
+	reg = readl(wdt_base + regs->wdt_mode);
+	reg &= ~(WDT_TIMEOUT_MASK << regs->wdt_timeout_shift);
+	reg |= wdt_timeout_map[timeout] << regs->wdt_timeout_shift;
+	writel(reg, wdt_base + regs->wdt_mode);
+
+	sunxi_wdt_ping(wdt_dev);
+
+	return 0;
+}
+
+static int sunxi_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct sunxi_wdt_dev *sunxi_wdt = watchdog_get_drvdata(wdt_dev);
+	void __iomem *wdt_base = sunxi_wdt->wdt_base;
+	const struct sunxi_wdt_reg *regs = sunxi_wdt->wdt_regs;
+
+	writel(0, wdt_base + regs->wdt_mode);
+
+	return 0;
+}
+
+static int sunxi_wdt_start(struct watchdog_device *wdt_dev)
+{
+	u32 reg;
+	struct sunxi_wdt_dev *sunxi_wdt = watchdog_get_drvdata(wdt_dev);
+	void __iomem *wdt_base = sunxi_wdt->wdt_base;
+	const struct sunxi_wdt_reg *regs = sunxi_wdt->wdt_regs;
+	int ret;
+
+	ret = sunxi_wdt_set_timeout(&sunxi_wdt->wdt_dev,
+			sunxi_wdt->wdt_dev.timeout);
+	if (ret < 0)
+		return ret;
+
+	/* Set system reset function */
+	reg = readl(wdt_base + regs->wdt_cfg);
+	reg &= ~(regs->wdt_reset_mask);
+	reg |= regs->wdt_reset_val;
+	writel(reg, wdt_base + regs->wdt_cfg);
+
+	/* Enable watchdog */
+	reg = readl(wdt_base + regs->wdt_mode);
+	reg |= WDT_MODE_EN;
+	writel(reg, wdt_base + regs->wdt_mode);
+
+	return 0;
+}
+
+static const struct watchdog_info sunxi_wdt_info = {
+	.identity	= DRV_NAME,
+	.options	= WDIOF_SETTIMEOUT |
+			  WDIOF_KEEPALIVEPING |
+			  WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops sunxi_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= sunxi_wdt_start,
+	.stop		= sunxi_wdt_stop,
+	.ping		= sunxi_wdt_ping,
+	.set_timeout	= sunxi_wdt_set_timeout,
+	.restart	= sunxi_wdt_restart,
+};
+
+static const struct sunxi_wdt_reg sun4i_wdt_reg = {
+	.wdt_ctrl = 0x00,
+	.wdt_cfg = 0x04,
+	.wdt_mode = 0x04,
+	.wdt_timeout_shift = 3,
+	.wdt_reset_mask = 0x02,
+	.wdt_reset_val = 0x02,
+};
+
+static const struct sunxi_wdt_reg sun6i_wdt_reg = {
+	.wdt_ctrl = 0x10,
+	.wdt_cfg = 0x14,
+	.wdt_mode = 0x18,
+	.wdt_timeout_shift = 4,
+	.wdt_reset_mask = 0x03,
+	.wdt_reset_val = 0x01,
+};
+
+static const struct of_device_id sunxi_wdt_dt_ids[] = {
+	{ .compatible = "allwinner,sun4i-a10-wdt", .data = &sun4i_wdt_reg },
+	{ .compatible = "allwinner,sun6i-a31-wdt", .data = &sun6i_wdt_reg },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sunxi_wdt_dt_ids);
+
+static int sunxi_wdt_probe(struct platform_device *pdev)
+{
+	struct sunxi_wdt_dev *sunxi_wdt;
+	struct resource *res;
+	int err;
+
+	sunxi_wdt = devm_kzalloc(&pdev->dev, sizeof(*sunxi_wdt), GFP_KERNEL);
+	if (!sunxi_wdt)
+		return -EINVAL;
+
+	sunxi_wdt->wdt_regs = of_device_get_match_data(&pdev->dev);
+	if (!sunxi_wdt->wdt_regs)
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	sunxi_wdt->wdt_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(sunxi_wdt->wdt_base))
+		return PTR_ERR(sunxi_wdt->wdt_base);
+
+	sunxi_wdt->wdt_dev.info = &sunxi_wdt_info;
+	sunxi_wdt->wdt_dev.ops = &sunxi_wdt_ops;
+	sunxi_wdt->wdt_dev.timeout = WDT_MAX_TIMEOUT;
+	sunxi_wdt->wdt_dev.max_timeout = WDT_MAX_TIMEOUT;
+	sunxi_wdt->wdt_dev.min_timeout = WDT_MIN_TIMEOUT;
+	sunxi_wdt->wdt_dev.parent = &pdev->dev;
+
+	watchdog_init_timeout(&sunxi_wdt->wdt_dev, timeout, &pdev->dev);
+	watchdog_set_nowayout(&sunxi_wdt->wdt_dev, nowayout);
+	watchdog_set_restart_priority(&sunxi_wdt->wdt_dev, 128);
+
+	watchdog_set_drvdata(&sunxi_wdt->wdt_dev, sunxi_wdt);
+
+	sunxi_wdt_stop(&sunxi_wdt->wdt_dev);
+
+	watchdog_stop_on_reboot(&sunxi_wdt->wdt_dev);
+	err = devm_watchdog_register_device(&pdev->dev, &sunxi_wdt->wdt_dev);
+	if (unlikely(err))
+		return err;
+
+	dev_info(&pdev->dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)",
+			sunxi_wdt->wdt_dev.timeout, nowayout);
+
+	return 0;
+}
+
+static struct platform_driver sunxi_wdt_driver = {
+	.probe		= sunxi_wdt_probe,
+	.driver		= {
+		.name		= DRV_NAME,
+		.of_match_table	= sunxi_wdt_dt_ids,
+	},
+};
+
+module_platform_driver(sunxi_wdt_driver);
+
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout, "Watchdog heartbeat in seconds");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+		"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Carlo Caione <carlo.caione@gmail.com>");
+MODULE_AUTHOR("Henrik Nordstrom <henrik@henriknordstrom.net>");
+MODULE_DESCRIPTION("sunxi WatchDog Timer Driver");
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/watchdog/tangox_wdt.c b/drivers/watchdog/tangox_wdt.c
new file mode 100644
index 000000000..d0b53f3c0
--- /dev/null
+++ b/drivers/watchdog/tangox_wdt.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Copyright (C) 2015 Mans Rullgard <mans@mansr.com>
+ *  SMP86xx/SMP87xx Watchdog driver
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define DEFAULT_TIMEOUT 30
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		 "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static unsigned int timeout;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout");
+
+/*
+ * Counter counts down from programmed value.  Reset asserts when
+ * the counter reaches 1.
+ */
+#define WD_COUNTER		0
+
+#define WD_CONFIG		4
+#define WD_CONFIG_XTAL_IN	BIT(0)
+#define WD_CONFIG_DISABLE	BIT(31)
+
+struct tangox_wdt_device {
+	struct watchdog_device wdt;
+	void __iomem *base;
+	unsigned long clk_rate;
+	struct clk *clk;
+};
+
+static int tangox_wdt_set_timeout(struct watchdog_device *wdt,
+				  unsigned int new_timeout)
+{
+	wdt->timeout = new_timeout;
+
+	return 0;
+}
+
+static int tangox_wdt_start(struct watchdog_device *wdt)
+{
+	struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
+	u32 ticks;
+
+	ticks = 1 + wdt->timeout * dev->clk_rate;
+	writel(ticks, dev->base + WD_COUNTER);
+
+	return 0;
+}
+
+static int tangox_wdt_stop(struct watchdog_device *wdt)
+{
+	struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
+
+	writel(0, dev->base + WD_COUNTER);
+
+	return 0;
+}
+
+static unsigned int tangox_wdt_get_timeleft(struct watchdog_device *wdt)
+{
+	struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
+	u32 count;
+
+	count = readl(dev->base + WD_COUNTER);
+
+	if (!count)
+		return 0;
+
+	return (count - 1) / dev->clk_rate;
+}
+
+static const struct watchdog_info tangox_wdt_info = {
+	.options  = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "tangox watchdog",
+};
+
+static int tangox_wdt_restart(struct watchdog_device *wdt,
+			      unsigned long action, void *data)
+{
+	struct tangox_wdt_device *dev = watchdog_get_drvdata(wdt);
+
+	writel(1, dev->base + WD_COUNTER);
+
+	return 0;
+}
+
+static const struct watchdog_ops tangox_wdt_ops = {
+	.start		= tangox_wdt_start,
+	.stop		= tangox_wdt_stop,
+	.set_timeout	= tangox_wdt_set_timeout,
+	.get_timeleft	= tangox_wdt_get_timeleft,
+	.restart	= tangox_wdt_restart,
+};
+
+static int tangox_wdt_probe(struct platform_device *pdev)
+{
+	struct tangox_wdt_device *dev;
+	struct resource *res;
+	u32 config;
+	int err;
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dev->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(dev->base))
+		return PTR_ERR(dev->base);
+
+	dev->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(dev->clk))
+		return PTR_ERR(dev->clk);
+
+	err = clk_prepare_enable(dev->clk);
+	if (err)
+		return err;
+
+	dev->clk_rate = clk_get_rate(dev->clk);
+	if (!dev->clk_rate) {
+		err = -EINVAL;
+		goto err;
+	}
+
+	dev->wdt.parent = &pdev->dev;
+	dev->wdt.info = &tangox_wdt_info;
+	dev->wdt.ops = &tangox_wdt_ops;
+	dev->wdt.timeout = DEFAULT_TIMEOUT;
+	dev->wdt.min_timeout = 1;
+	dev->wdt.max_hw_heartbeat_ms = (U32_MAX - 1) / dev->clk_rate;
+
+	watchdog_init_timeout(&dev->wdt, timeout, &pdev->dev);
+	watchdog_set_nowayout(&dev->wdt, nowayout);
+	watchdog_set_drvdata(&dev->wdt, dev);
+
+	/*
+	 * Deactivate counter if disable bit is set to avoid
+	 * accidental reset.
+	 */
+	config = readl(dev->base + WD_CONFIG);
+	if (config & WD_CONFIG_DISABLE)
+		writel(0, dev->base + WD_COUNTER);
+
+	writel(WD_CONFIG_XTAL_IN, dev->base + WD_CONFIG);
+
+	/*
+	 * Mark as active and restart with configured timeout if
+	 * already running.
+	 */
+	if (readl(dev->base + WD_COUNTER)) {
+		set_bit(WDOG_HW_RUNNING, &dev->wdt.status);
+		tangox_wdt_start(&dev->wdt);
+	}
+
+	watchdog_set_restart_priority(&dev->wdt, 128);
+
+	err = watchdog_register_device(&dev->wdt);
+	if (err)
+		goto err;
+
+	platform_set_drvdata(pdev, dev);
+
+	dev_info(&pdev->dev, "SMP86xx/SMP87xx watchdog registered\n");
+
+	return 0;
+
+ err:
+	clk_disable_unprepare(dev->clk);
+	return err;
+}
+
+static int tangox_wdt_remove(struct platform_device *pdev)
+{
+	struct tangox_wdt_device *dev = platform_get_drvdata(pdev);
+
+	tangox_wdt_stop(&dev->wdt);
+	clk_disable_unprepare(dev->clk);
+
+	watchdog_unregister_device(&dev->wdt);
+
+	return 0;
+}
+
+static const struct of_device_id tangox_wdt_dt_ids[] = {
+	{ .compatible = "sigma,smp8642-wdt" },
+	{ .compatible = "sigma,smp8759-wdt" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tangox_wdt_dt_ids);
+
+static struct platform_driver tangox_wdt_driver = {
+	.probe	= tangox_wdt_probe,
+	.remove	= tangox_wdt_remove,
+	.driver	= {
+		.name		= "tangox-wdt",
+		.of_match_table	= tangox_wdt_dt_ids,
+	},
+};
+
+module_platform_driver(tangox_wdt_driver);
+
+MODULE_AUTHOR("Mans Rullgard <mans@mansr.com>");
+MODULE_DESCRIPTION("SMP86xx/SMP87xx Watchdog driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/tegra_wdt.c b/drivers/watchdog/tegra_wdt.c
new file mode 100644
index 000000000..877dd39bd
--- /dev/null
+++ b/drivers/watchdog/tegra_wdt.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2014, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+/* minimum and maximum watchdog trigger timeout, in seconds */
+#define MIN_WDT_TIMEOUT			1
+#define MAX_WDT_TIMEOUT			255
+
+/*
+ * Base of the WDT registers, from the timer base address.  There are
+ * actually 5 watchdogs that can be configured (by pairing with an available
+ * timer), at bases 0x100 + (WDT ID) * 0x20, where WDT ID is 0 through 4.
+ * This driver only configures the first watchdog (WDT ID 0).
+ */
+#define WDT_BASE			0x100
+#define WDT_ID				0
+
+/*
+ * Register base of the timer that's selected for pairing with the watchdog.
+ * This driver arbitrarily uses timer 5, which is currently unused by
+ * other drivers (in particular, the Tegra clocksource driver).  If this
+ * needs to change, take care that the new timer is not used by the
+ * clocksource driver.
+ */
+#define WDT_TIMER_BASE			0x60
+#define WDT_TIMER_ID			5
+
+/* WDT registers */
+#define WDT_CFG				0x0
+#define WDT_CFG_PERIOD_SHIFT		4
+#define WDT_CFG_PERIOD_MASK		0xff
+#define WDT_CFG_INT_EN			(1 << 12)
+#define WDT_CFG_PMC2CAR_RST_EN		(1 << 15)
+#define WDT_STS				0x4
+#define WDT_STS_COUNT_SHIFT		4
+#define WDT_STS_COUNT_MASK		0xff
+#define WDT_STS_EXP_SHIFT		12
+#define WDT_STS_EXP_MASK		0x3
+#define WDT_CMD				0x8
+#define WDT_CMD_START_COUNTER		(1 << 0)
+#define WDT_CMD_DISABLE_COUNTER		(1 << 1)
+#define WDT_UNLOCK			(0xc)
+#define WDT_UNLOCK_PATTERN		(0xc45a << 0)
+
+/* Timer registers */
+#define TIMER_PTV			0x0
+#define TIMER_EN			(1 << 31)
+#define TIMER_PERIODIC			(1 << 30)
+
+struct tegra_wdt {
+	struct watchdog_device	wdd;
+	void __iomem		*wdt_regs;
+	void __iomem		*tmr_regs;
+};
+
+#define WDT_HEARTBEAT 120
+static int heartbeat = WDT_HEARTBEAT;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat,
+	"Watchdog heartbeats in seconds. (default = "
+	__MODULE_STRING(WDT_HEARTBEAT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int tegra_wdt_start(struct watchdog_device *wdd)
+{
+	struct tegra_wdt *wdt = watchdog_get_drvdata(wdd);
+	u32 val;
+
+	/*
+	 * This thing has a fixed 1MHz clock.  Normally, we would set the
+	 * period to 1 second by writing 1000000ul, but the watchdog system
+	 * reset actually occurs on the 4th expiration of this counter,
+	 * so we set the period to 1/4 of this amount.
+	 */
+	val = 1000000ul / 4;
+	val |= (TIMER_EN | TIMER_PERIODIC);
+	writel(val, wdt->tmr_regs + TIMER_PTV);
+
+	/*
+	 * Set number of periods and start counter.
+	 *
+	 * Interrupt handler is not required for user space
+	 * WDT accesses, since the caller is responsible to ping the
+	 * WDT to reset the counter before expiration, through ioctls.
+	 */
+	val = WDT_TIMER_ID |
+	      (wdd->timeout << WDT_CFG_PERIOD_SHIFT) |
+	      WDT_CFG_PMC2CAR_RST_EN;
+	writel(val, wdt->wdt_regs + WDT_CFG);
+
+	writel(WDT_CMD_START_COUNTER, wdt->wdt_regs + WDT_CMD);
+
+	return 0;
+}
+
+static int tegra_wdt_stop(struct watchdog_device *wdd)
+{
+	struct tegra_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	writel(WDT_UNLOCK_PATTERN, wdt->wdt_regs + WDT_UNLOCK);
+	writel(WDT_CMD_DISABLE_COUNTER, wdt->wdt_regs + WDT_CMD);
+	writel(0, wdt->tmr_regs + TIMER_PTV);
+
+	return 0;
+}
+
+static int tegra_wdt_ping(struct watchdog_device *wdd)
+{
+	struct tegra_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	writel(WDT_CMD_START_COUNTER, wdt->wdt_regs + WDT_CMD);
+
+	return 0;
+}
+
+static int tegra_wdt_set_timeout(struct watchdog_device *wdd,
+				 unsigned int timeout)
+{
+	wdd->timeout = timeout;
+
+	if (watchdog_active(wdd)) {
+		tegra_wdt_stop(wdd);
+		return tegra_wdt_start(wdd);
+	}
+
+	return 0;
+}
+
+static unsigned int tegra_wdt_get_timeleft(struct watchdog_device *wdd)
+{
+	struct tegra_wdt *wdt = watchdog_get_drvdata(wdd);
+	u32 val;
+	int count;
+	int exp;
+
+	val = readl(wdt->wdt_regs + WDT_STS);
+
+	/* Current countdown (from timeout) */
+	count = (val >> WDT_STS_COUNT_SHIFT) & WDT_STS_COUNT_MASK;
+
+	/* Number of expirations (we are waiting for the 4th expiration) */
+	exp = (val >> WDT_STS_EXP_SHIFT) & WDT_STS_EXP_MASK;
+
+	/*
+	 * The entire thing is divided by 4 because we are ticking down 4 times
+	 * faster due to needing to wait for the 4th expiration.
+	 */
+	return (((3 - exp) * wdd->timeout) + count) / 4;
+}
+
+static const struct watchdog_info tegra_wdt_info = {
+	.options	= WDIOF_SETTIMEOUT |
+			  WDIOF_MAGICCLOSE |
+			  WDIOF_KEEPALIVEPING,
+	.firmware_version = 0,
+	.identity	= "Tegra Watchdog",
+};
+
+static const struct watchdog_ops tegra_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = tegra_wdt_start,
+	.stop = tegra_wdt_stop,
+	.ping = tegra_wdt_ping,
+	.set_timeout = tegra_wdt_set_timeout,
+	.get_timeleft = tegra_wdt_get_timeleft,
+};
+
+static int tegra_wdt_probe(struct platform_device *pdev)
+{
+	struct watchdog_device *wdd;
+	struct tegra_wdt *wdt;
+	struct resource *res;
+	void __iomem *regs;
+	int ret;
+
+	/* This is the timer base. */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	/*
+	 * Allocate our watchdog driver data, which has the
+	 * struct watchdog_device nested within it.
+	 */
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	/* Initialize struct tegra_wdt. */
+	wdt->wdt_regs = regs + WDT_BASE;
+	wdt->tmr_regs = regs + WDT_TIMER_BASE;
+
+	/* Initialize struct watchdog_device. */
+	wdd = &wdt->wdd;
+	wdd->timeout = heartbeat;
+	wdd->info = &tegra_wdt_info;
+	wdd->ops = &tegra_wdt_ops;
+	wdd->min_timeout = MIN_WDT_TIMEOUT;
+	wdd->max_timeout = MAX_WDT_TIMEOUT;
+	wdd->parent = &pdev->dev;
+
+	watchdog_set_drvdata(wdd, wdt);
+
+	watchdog_set_nowayout(wdd, nowayout);
+
+	ret = devm_watchdog_register_device(&pdev->dev, wdd);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"failed to register watchdog device\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, wdt);
+
+	dev_info(&pdev->dev,
+		 "initialized (heartbeat = %d sec, nowayout = %d)\n",
+		 heartbeat, nowayout);
+
+	return 0;
+}
+
+static int tegra_wdt_remove(struct platform_device *pdev)
+{
+	struct tegra_wdt *wdt = platform_get_drvdata(pdev);
+
+	tegra_wdt_stop(&wdt->wdd);
+
+	dev_info(&pdev->dev, "removed wdt\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tegra_wdt_runtime_suspend(struct device *dev)
+{
+	struct tegra_wdt *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->wdd))
+		tegra_wdt_stop(&wdt->wdd);
+
+	return 0;
+}
+
+static int tegra_wdt_runtime_resume(struct device *dev)
+{
+	struct tegra_wdt *wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&wdt->wdd))
+		tegra_wdt_start(&wdt->wdd);
+
+	return 0;
+}
+#endif
+
+static const struct of_device_id tegra_wdt_of_match[] = {
+	{ .compatible = "nvidia,tegra30-timer", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tegra_wdt_of_match);
+
+static const struct dev_pm_ops tegra_wdt_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(tegra_wdt_runtime_suspend,
+				tegra_wdt_runtime_resume)
+};
+
+static struct platform_driver tegra_wdt_driver = {
+	.probe		= tegra_wdt_probe,
+	.remove		= tegra_wdt_remove,
+	.driver		= {
+		.name	= "tegra-wdt",
+		.pm	= &tegra_wdt_pm_ops,
+		.of_match_table = tegra_wdt_of_match,
+	},
+};
+module_platform_driver(tegra_wdt_driver);
+
+MODULE_AUTHOR("NVIDIA Corporation");
+MODULE_DESCRIPTION("Tegra Watchdog Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/watchdog/ts4800_wdt.c b/drivers/watchdog/ts4800_wdt.c
new file mode 100644
index 000000000..2b8de8602
--- /dev/null
+++ b/drivers/watchdog/ts4800_wdt.c
@@ -0,0 +1,215 @@
+/*
+ * Watchdog driver for TS-4800 based boards
+ *
+ * Copyright (c) 2015 - Savoir-faire Linux
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/watchdog.h>
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/* possible feed values */
+#define TS4800_WDT_FEED_2S       0x1
+#define TS4800_WDT_FEED_10S      0x2
+#define TS4800_WDT_DISABLE       0x3
+
+struct ts4800_wdt {
+	struct watchdog_device  wdd;
+	struct regmap           *regmap;
+	u32                     feed_offset;
+	u32                     feed_val;
+};
+
+/*
+ * TS-4800 supports the following timeout values:
+ *
+ *   value desc
+ *   ---------------------
+ *     0    feed for 338ms
+ *     1    feed for 2.706s
+ *     2    feed for 10.824s
+ *     3    disable watchdog
+ *
+ * Keep the regmap/timeout map ordered by timeout
+ */
+static const struct {
+	const int timeout;
+	const int regval;
+} ts4800_wdt_map[] = {
+	{ 2,  TS4800_WDT_FEED_2S },
+	{ 10, TS4800_WDT_FEED_10S },
+};
+
+#define MAX_TIMEOUT_INDEX       (ARRAY_SIZE(ts4800_wdt_map) - 1)
+
+static void ts4800_write_feed(struct ts4800_wdt *wdt, u32 val)
+{
+	regmap_write(wdt->regmap, wdt->feed_offset, val);
+}
+
+static int ts4800_wdt_start(struct watchdog_device *wdd)
+{
+	struct ts4800_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	ts4800_write_feed(wdt, wdt->feed_val);
+	return 0;
+}
+
+static int ts4800_wdt_stop(struct watchdog_device *wdd)
+{
+	struct ts4800_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	ts4800_write_feed(wdt, TS4800_WDT_DISABLE);
+	return 0;
+}
+
+static int ts4800_wdt_set_timeout(struct watchdog_device *wdd,
+				  unsigned int timeout)
+{
+	struct ts4800_wdt *wdt = watchdog_get_drvdata(wdd);
+	int i;
+
+	for (i = 0; i < MAX_TIMEOUT_INDEX; i++) {
+		if (ts4800_wdt_map[i].timeout >= timeout)
+			break;
+	}
+
+	wdd->timeout = ts4800_wdt_map[i].timeout;
+	wdt->feed_val = ts4800_wdt_map[i].regval;
+
+	return 0;
+}
+
+static const struct watchdog_ops ts4800_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = ts4800_wdt_start,
+	.stop = ts4800_wdt_stop,
+	.set_timeout = ts4800_wdt_set_timeout,
+};
+
+static const struct watchdog_info ts4800_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+	.identity = "TS-4800 Watchdog",
+};
+
+static int ts4800_wdt_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *syscon_np;
+	struct watchdog_device *wdd;
+	struct ts4800_wdt *wdt;
+	u32 reg;
+	int ret;
+
+	syscon_np = of_parse_phandle(np, "syscon", 0);
+	if (!syscon_np) {
+		dev_err(&pdev->dev, "no syscon property\n");
+		return -ENODEV;
+	}
+
+	ret = of_property_read_u32_index(np, "syscon", 1, &reg);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "no offset in syscon\n");
+		return ret;
+	}
+
+	/* allocate memory for watchdog struct */
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	/* set regmap and offset to know where to write */
+	wdt->feed_offset = reg;
+	wdt->regmap = syscon_node_to_regmap(syscon_np);
+	if (IS_ERR(wdt->regmap)) {
+		dev_err(&pdev->dev, "cannot get parent's regmap\n");
+		return PTR_ERR(wdt->regmap);
+	}
+
+	/* Initialize struct watchdog_device */
+	wdd = &wdt->wdd;
+	wdd->parent = &pdev->dev;
+	wdd->info = &ts4800_wdt_info;
+	wdd->ops = &ts4800_wdt_ops;
+	wdd->min_timeout = ts4800_wdt_map[0].timeout;
+	wdd->max_timeout = ts4800_wdt_map[MAX_TIMEOUT_INDEX].timeout;
+
+	watchdog_set_drvdata(wdd, wdt);
+	watchdog_set_nowayout(wdd, nowayout);
+	watchdog_init_timeout(wdd, 0, &pdev->dev);
+
+	/*
+	 * As this watchdog supports only a few values, ts4800_wdt_set_timeout
+	 * must be called to initialize timeout and feed_val with valid values.
+	 * Default to maximum timeout if none, or an invalid one, is provided in
+	 * device tree.
+	 */
+	if (!wdd->timeout)
+		wdd->timeout = wdd->max_timeout;
+	ts4800_wdt_set_timeout(wdd, wdd->timeout);
+
+	/*
+	 * The feed register is write-only, so it is not possible to determine
+	 * watchdog's state. Disable it to be in a known state.
+	 */
+	ts4800_wdt_stop(wdd);
+
+	ret = watchdog_register_device(wdd);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"failed to register watchdog device\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, wdt);
+
+	dev_info(&pdev->dev,
+		 "initialized (timeout = %d sec, nowayout = %d)\n",
+		 wdd->timeout, nowayout);
+
+	return 0;
+}
+
+static int ts4800_wdt_remove(struct platform_device *pdev)
+{
+	struct ts4800_wdt *wdt = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&wdt->wdd);
+
+	return 0;
+}
+
+static const struct of_device_id ts4800_wdt_of_match[] = {
+	{ .compatible = "technologic,ts4800-wdt", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ts4800_wdt_of_match);
+
+static struct platform_driver ts4800_wdt_driver = {
+	.probe		= ts4800_wdt_probe,
+	.remove		= ts4800_wdt_remove,
+	.driver		= {
+		.name	= "ts4800_wdt",
+		.of_match_table = ts4800_wdt_of_match,
+	},
+};
+
+module_platform_driver(ts4800_wdt_driver);
+
+MODULE_AUTHOR("Damien Riegel <damien.riegel@savoirfairelinux.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:ts4800_wdt");
diff --git a/drivers/watchdog/ts72xx_wdt.c b/drivers/watchdog/ts72xx_wdt.c
new file mode 100644
index 000000000..811e43c39
--- /dev/null
+++ b/drivers/watchdog/ts72xx_wdt.c
@@ -0,0 +1,179 @@
+/*
+ * Watchdog driver for Technologic Systems TS-72xx based SBCs
+ * (TS-7200, TS-7250 and TS-7260). These boards have external
+ * glue logic CPLD chip, which includes programmable watchdog
+ * timer.
+ *
+ * Copyright (c) 2009 Mika Westerberg <mika.westerberg@iki.fi>
+ *
+ * This driver is based on ep93xx_wdt and wm831x_wdt drivers.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <linux/io.h>
+
+#define TS72XX_WDT_DEFAULT_TIMEOUT	30
+
+static int timeout;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds.");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
+
+/* priv->control_reg */
+#define TS72XX_WDT_CTRL_DISABLE		0x00
+#define TS72XX_WDT_CTRL_250MS		0x01
+#define TS72XX_WDT_CTRL_500MS		0x02
+#define TS72XX_WDT_CTRL_1SEC		0x03
+#define TS72XX_WDT_CTRL_RESERVED	0x04
+#define TS72XX_WDT_CTRL_2SEC		0x05
+#define TS72XX_WDT_CTRL_4SEC		0x06
+#define TS72XX_WDT_CTRL_8SEC		0x07
+
+/* priv->feed_reg */
+#define TS72XX_WDT_FEED_VAL		0x05
+
+struct ts72xx_wdt_priv {
+	void __iomem	*control_reg;
+	void __iomem	*feed_reg;
+	struct watchdog_device wdd;
+	unsigned char regval;
+};
+
+static int ts72xx_wdt_start(struct watchdog_device *wdd)
+{
+	struct ts72xx_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+	writeb(TS72XX_WDT_FEED_VAL, priv->feed_reg);
+	writeb(priv->regval, priv->control_reg);
+
+	return 0;
+}
+
+static int ts72xx_wdt_stop(struct watchdog_device *wdd)
+{
+	struct ts72xx_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+	writeb(TS72XX_WDT_FEED_VAL, priv->feed_reg);
+	writeb(TS72XX_WDT_CTRL_DISABLE, priv->control_reg);
+
+	return 0;
+}
+
+static int ts72xx_wdt_ping(struct watchdog_device *wdd)
+{
+	struct ts72xx_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+	writeb(TS72XX_WDT_FEED_VAL, priv->feed_reg);
+
+	return 0;
+}
+
+static int ts72xx_wdt_settimeout(struct watchdog_device *wdd, unsigned int to)
+{
+	struct ts72xx_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+	if (to == 1) {
+		priv->regval = TS72XX_WDT_CTRL_1SEC;
+	} else if (to == 2) {
+		priv->regval = TS72XX_WDT_CTRL_2SEC;
+	} else if (to <= 4) {
+		priv->regval = TS72XX_WDT_CTRL_4SEC;
+		to = 4;
+	} else {
+		priv->regval = TS72XX_WDT_CTRL_8SEC;
+		if (to <= 8)
+			to = 8;
+	}
+
+	wdd->timeout = to;
+
+	if (watchdog_active(wdd)) {
+		ts72xx_wdt_stop(wdd);
+		ts72xx_wdt_start(wdd);
+	}
+
+	return 0;
+}
+
+static const struct watchdog_info ts72xx_wdt_ident = {
+	.options		= WDIOF_KEEPALIVEPING |
+				  WDIOF_SETTIMEOUT |
+				  WDIOF_MAGICCLOSE,
+	.firmware_version	= 1,
+	.identity		= "TS-72XX WDT",
+};
+
+static const struct watchdog_ops ts72xx_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= ts72xx_wdt_start,
+	.stop		= ts72xx_wdt_stop,
+	.ping		= ts72xx_wdt_ping,
+	.set_timeout	= ts72xx_wdt_settimeout,
+};
+
+static int ts72xx_wdt_probe(struct platform_device *pdev)
+{
+	struct ts72xx_wdt_priv *priv;
+	struct watchdog_device *wdd;
+	struct resource *res;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->control_reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->control_reg))
+		return PTR_ERR(priv->control_reg);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	priv->feed_reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->feed_reg))
+		return PTR_ERR(priv->feed_reg);
+
+	wdd = &priv->wdd;
+	wdd->info = &ts72xx_wdt_ident;
+	wdd->ops = &ts72xx_wdt_ops;
+	wdd->min_timeout = 1;
+	wdd->max_hw_heartbeat_ms = 8000;
+	wdd->parent = &pdev->dev;
+
+	watchdog_set_nowayout(wdd, nowayout);
+
+	wdd->timeout = TS72XX_WDT_DEFAULT_TIMEOUT;
+	watchdog_init_timeout(wdd, timeout, &pdev->dev);
+
+	watchdog_set_drvdata(wdd, priv);
+
+	ret = devm_watchdog_register_device(&pdev->dev, wdd);
+	if (ret)
+		return ret;
+
+	dev_info(&pdev->dev, "TS-72xx Watchdog driver\n");
+
+	return 0;
+}
+
+static struct platform_driver ts72xx_wdt_driver = {
+	.probe		= ts72xx_wdt_probe,
+	.driver		= {
+		.name	= "ts72xx-wdt",
+	},
+};
+
+module_platform_driver(ts72xx_wdt_driver);
+
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@iki.fi>");
+MODULE_DESCRIPTION("TS-72xx SBC Watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ts72xx-wdt");
diff --git a/drivers/watchdog/twl4030_wdt.c b/drivers/watchdog/twl4030_wdt.c
new file mode 100644
index 000000000..569fe85e5
--- /dev/null
+++ b/drivers/watchdog/twl4030_wdt.c
@@ -0,0 +1,154 @@
+/*
+ * Copyright (C) Nokia Corporation
+ *
+ * Written by Timo Kokkonen <timo.t.kokkonen at nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/twl.h>
+
+#define TWL4030_WATCHDOG_CFG_REG_OFFS	0x3
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+	"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int twl4030_wdt_write(unsigned char val)
+{
+	return twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, val,
+					TWL4030_WATCHDOG_CFG_REG_OFFS);
+}
+
+static int twl4030_wdt_start(struct watchdog_device *wdt)
+{
+	return twl4030_wdt_write(wdt->timeout + 1);
+}
+
+static int twl4030_wdt_stop(struct watchdog_device *wdt)
+{
+	return twl4030_wdt_write(0);
+}
+
+static int twl4030_wdt_set_timeout(struct watchdog_device *wdt,
+				   unsigned int timeout)
+{
+	wdt->timeout = timeout;
+	return 0;
+}
+
+static const struct watchdog_info twl4030_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+	.identity = "TWL4030 Watchdog",
+};
+
+static const struct watchdog_ops twl4030_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= twl4030_wdt_start,
+	.stop		= twl4030_wdt_stop,
+	.set_timeout	= twl4030_wdt_set_timeout,
+};
+
+static int twl4030_wdt_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct watchdog_device *wdt;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdt->info		= &twl4030_wdt_info;
+	wdt->ops		= &twl4030_wdt_ops;
+	wdt->status		= 0;
+	wdt->timeout		= 30;
+	wdt->min_timeout	= 1;
+	wdt->max_timeout	= 30;
+	wdt->parent = &pdev->dev;
+
+	watchdog_set_nowayout(wdt, nowayout);
+	platform_set_drvdata(pdev, wdt);
+
+	twl4030_wdt_stop(wdt);
+
+	ret = watchdog_register_device(wdt);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int twl4030_wdt_remove(struct platform_device *pdev)
+{
+	struct watchdog_device *wdt = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(wdt);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int twl4030_wdt_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct watchdog_device *wdt = platform_get_drvdata(pdev);
+	if (watchdog_active(wdt))
+		return twl4030_wdt_stop(wdt);
+
+	return 0;
+}
+
+static int twl4030_wdt_resume(struct platform_device *pdev)
+{
+	struct watchdog_device *wdt = platform_get_drvdata(pdev);
+	if (watchdog_active(wdt))
+		return twl4030_wdt_start(wdt);
+
+	return 0;
+}
+#else
+#define twl4030_wdt_suspend        NULL
+#define twl4030_wdt_resume         NULL
+#endif
+
+static const struct of_device_id twl_wdt_of_match[] = {
+	{ .compatible = "ti,twl4030-wdt", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, twl_wdt_of_match);
+
+static struct platform_driver twl4030_wdt_driver = {
+	.probe		= twl4030_wdt_probe,
+	.remove		= twl4030_wdt_remove,
+	.suspend	= twl4030_wdt_suspend,
+	.resume		= twl4030_wdt_resume,
+	.driver		= {
+		.name		= "twl4030_wdt",
+		.of_match_table	= twl_wdt_of_match,
+	},
+};
+
+module_platform_driver(twl4030_wdt_driver);
+
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:twl4030_wdt");
+
diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c
new file mode 100644
index 000000000..6f7a9deb2
--- /dev/null
+++ b/drivers/watchdog/txx9wdt.c
@@ -0,0 +1,178 @@
+/*
+ * txx9wdt: A Hardware Watchdog Driver for TXx9 SoCs
+ *
+ * Copyright (C) 2007 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <asm/txx9tmr.h>
+
+#define WD_TIMER_CCD	7		/* 1/256 */
+#define WD_TIMER_CLK	(clk_get_rate(txx9_imclk) / (2 << WD_TIMER_CCD))
+#define WD_MAX_TIMEOUT	((0xffffffff >> (32 - TXX9_TIMER_BITS)) / WD_TIMER_CLK)
+#define TIMER_MARGIN	60		/* Default is 60 seconds */
+
+static unsigned int timeout = TIMER_MARGIN;	/* in seconds */
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. "
+	"(0<timeout<((2^" __MODULE_STRING(TXX9_TIMER_BITS) ")/(IMCLK/256)), "
+	"default=" __MODULE_STRING(TIMER_MARGIN) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started "
+	"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static struct txx9_tmr_reg __iomem *txx9wdt_reg;
+static struct clk *txx9_imclk;
+static DEFINE_SPINLOCK(txx9_lock);
+
+static int txx9wdt_ping(struct watchdog_device *wdt_dev)
+{
+	spin_lock(&txx9_lock);
+	__raw_writel(TXx9_TMWTMR_TWIE | TXx9_TMWTMR_TWC, &txx9wdt_reg->wtmr);
+	spin_unlock(&txx9_lock);
+	return 0;
+}
+
+static int txx9wdt_start(struct watchdog_device *wdt_dev)
+{
+	spin_lock(&txx9_lock);
+	__raw_writel(WD_TIMER_CLK * wdt_dev->timeout, &txx9wdt_reg->cpra);
+	__raw_writel(WD_TIMER_CCD, &txx9wdt_reg->ccdr);
+	__raw_writel(0, &txx9wdt_reg->tisr);	/* clear pending interrupt */
+	__raw_writel(TXx9_TMTCR_TCE | TXx9_TMTCR_CCDE | TXx9_TMTCR_TMODE_WDOG,
+		     &txx9wdt_reg->tcr);
+	__raw_writel(TXx9_TMWTMR_TWIE | TXx9_TMWTMR_TWC, &txx9wdt_reg->wtmr);
+	spin_unlock(&txx9_lock);
+	return 0;
+}
+
+static int txx9wdt_stop(struct watchdog_device *wdt_dev)
+{
+	spin_lock(&txx9_lock);
+	__raw_writel(TXx9_TMWTMR_WDIS, &txx9wdt_reg->wtmr);
+	__raw_writel(__raw_readl(&txx9wdt_reg->tcr) & ~TXx9_TMTCR_TCE,
+		     &txx9wdt_reg->tcr);
+	spin_unlock(&txx9_lock);
+	return 0;
+}
+
+static int txx9wdt_set_timeout(struct watchdog_device *wdt_dev,
+			       unsigned int new_timeout)
+{
+	wdt_dev->timeout = new_timeout;
+	txx9wdt_stop(wdt_dev);
+	txx9wdt_start(wdt_dev);
+	return 0;
+}
+
+static const struct watchdog_info txx9wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "Hardware Watchdog for TXx9",
+};
+
+static const struct watchdog_ops txx9wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = txx9wdt_start,
+	.stop = txx9wdt_stop,
+	.ping = txx9wdt_ping,
+	.set_timeout = txx9wdt_set_timeout,
+};
+
+static struct watchdog_device txx9wdt = {
+	.info = &txx9wdt_info,
+	.ops = &txx9wdt_ops,
+};
+
+static int __init txx9wdt_probe(struct platform_device *dev)
+{
+	struct resource *res;
+	int ret;
+
+	txx9_imclk = clk_get(NULL, "imbus_clk");
+	if (IS_ERR(txx9_imclk)) {
+		ret = PTR_ERR(txx9_imclk);
+		txx9_imclk = NULL;
+		goto exit;
+	}
+	ret = clk_prepare_enable(txx9_imclk);
+	if (ret) {
+		clk_put(txx9_imclk);
+		txx9_imclk = NULL;
+		goto exit;
+	}
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	txx9wdt_reg = devm_ioremap_resource(&dev->dev, res);
+	if (IS_ERR(txx9wdt_reg)) {
+		ret = PTR_ERR(txx9wdt_reg);
+		goto exit;
+	}
+
+	if (timeout < 1 || timeout > WD_MAX_TIMEOUT)
+		timeout = TIMER_MARGIN;
+	txx9wdt.timeout = timeout;
+	txx9wdt.min_timeout = 1;
+	txx9wdt.max_timeout = WD_MAX_TIMEOUT;
+	txx9wdt.parent = &dev->dev;
+	watchdog_set_nowayout(&txx9wdt, nowayout);
+
+	ret = watchdog_register_device(&txx9wdt);
+	if (ret)
+		goto exit;
+
+	pr_info("Hardware Watchdog Timer: timeout=%d sec (max %ld) (nowayout= %d)\n",
+		timeout, WD_MAX_TIMEOUT, nowayout);
+
+	return 0;
+exit:
+	if (txx9_imclk) {
+		clk_disable_unprepare(txx9_imclk);
+		clk_put(txx9_imclk);
+	}
+	return ret;
+}
+
+static int __exit txx9wdt_remove(struct platform_device *dev)
+{
+	watchdog_unregister_device(&txx9wdt);
+	clk_disable_unprepare(txx9_imclk);
+	clk_put(txx9_imclk);
+	return 0;
+}
+
+static void txx9wdt_shutdown(struct platform_device *dev)
+{
+	txx9wdt_stop(&txx9wdt);
+}
+
+static struct platform_driver txx9wdt_driver = {
+	.remove = __exit_p(txx9wdt_remove),
+	.shutdown = txx9wdt_shutdown,
+	.driver = {
+		.name = "txx9wdt",
+	},
+};
+
+module_platform_driver_probe(txx9wdt_driver, txx9wdt_probe);
+
+MODULE_DESCRIPTION("TXx9 Watchdog Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:txx9wdt");
diff --git a/drivers/watchdog/uniphier_wdt.c b/drivers/watchdog/uniphier_wdt.c
new file mode 100644
index 000000000..e20a7a459
--- /dev/null
+++ b/drivers/watchdog/uniphier_wdt.c
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Watchdog driver for the UniPhier watchdog timer
+ *
+ * (c) Copyright 2014 Panasonic Corporation
+ * (c) Copyright 2016 Socionext Inc.
+ * All rights reserved.
+ */
+
+#include <linux/bitops.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/watchdog.h>
+
+/* WDT timer setting register */
+#define WDTTIMSET			0x3004
+#define   WDTTIMSET_PERIOD_MASK		(0xf << 0)
+#define   WDTTIMSET_PERIOD_1_SEC	(0x3 << 0)
+
+/* WDT reset selection register */
+#define WDTRSTSEL			0x3008
+#define   WDTRSTSEL_RSTSEL_MASK		(0x3 << 0)
+#define   WDTRSTSEL_RSTSEL_BOTH		(0x0 << 0)
+#define   WDTRSTSEL_RSTSEL_IRQ_ONLY	(0x2 << 0)
+
+/* WDT control register */
+#define WDTCTRL				0x300c
+#define   WDTCTRL_STATUS		BIT(8)
+#define   WDTCTRL_CLEAR			BIT(1)
+#define   WDTCTRL_ENABLE		BIT(0)
+
+#define SEC_TO_WDTTIMSET_PRD(sec) \
+		(ilog2(sec) + WDTTIMSET_PERIOD_1_SEC)
+
+#define WDTST_TIMEOUT			1000 /* usec */
+
+#define WDT_DEFAULT_TIMEOUT		64   /* Default is 64 seconds */
+#define WDT_PERIOD_MIN			1
+#define WDT_PERIOD_MAX			128
+
+static unsigned int timeout = 0;
+static bool nowayout = WATCHDOG_NOWAYOUT;
+
+struct uniphier_wdt_dev {
+	struct watchdog_device wdt_dev;
+	struct regmap	*regmap;
+};
+
+/*
+ * UniPhier Watchdog operations
+ */
+static int uniphier_watchdog_ping(struct watchdog_device *w)
+{
+	struct uniphier_wdt_dev *wdev = watchdog_get_drvdata(w);
+	unsigned int val;
+	int ret;
+
+	/* Clear counter */
+	ret = regmap_write_bits(wdev->regmap, WDTCTRL,
+				WDTCTRL_CLEAR, WDTCTRL_CLEAR);
+	if (!ret)
+		/*
+		 * As SoC specification, after clear counter,
+		 * it needs to wait until counter status is 1.
+		 */
+		ret = regmap_read_poll_timeout(wdev->regmap, WDTCTRL, val,
+					       (val & WDTCTRL_STATUS),
+					       0, WDTST_TIMEOUT);
+
+	return ret;
+}
+
+static int __uniphier_watchdog_start(struct regmap *regmap, unsigned int sec)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read_poll_timeout(regmap, WDTCTRL, val,
+				       !(val & WDTCTRL_STATUS),
+				       0, WDTST_TIMEOUT);
+	if (ret)
+		return ret;
+
+	/* Setup period */
+	ret = regmap_write(regmap, WDTTIMSET,
+			   SEC_TO_WDTTIMSET_PRD(sec));
+	if (ret)
+		return ret;
+
+	/* Enable and clear watchdog */
+	ret = regmap_write(regmap, WDTCTRL, WDTCTRL_ENABLE | WDTCTRL_CLEAR);
+	if (!ret)
+		/*
+		 * As SoC specification, after clear counter,
+		 * it needs to wait until counter status is 1.
+		 */
+		ret = regmap_read_poll_timeout(regmap, WDTCTRL, val,
+					       (val & WDTCTRL_STATUS),
+					       0, WDTST_TIMEOUT);
+
+	return ret;
+}
+
+static int __uniphier_watchdog_stop(struct regmap *regmap)
+{
+	/* Disable and stop watchdog */
+	return regmap_write_bits(regmap, WDTCTRL, WDTCTRL_ENABLE, 0);
+}
+
+static int __uniphier_watchdog_restart(struct regmap *regmap, unsigned int sec)
+{
+	int ret;
+
+	ret = __uniphier_watchdog_stop(regmap);
+	if (ret)
+		return ret;
+
+	return __uniphier_watchdog_start(regmap, sec);
+}
+
+static int uniphier_watchdog_start(struct watchdog_device *w)
+{
+	struct uniphier_wdt_dev *wdev = watchdog_get_drvdata(w);
+	unsigned int tmp_timeout;
+
+	tmp_timeout = roundup_pow_of_two(w->timeout);
+
+	return __uniphier_watchdog_start(wdev->regmap, tmp_timeout);
+}
+
+static int uniphier_watchdog_stop(struct watchdog_device *w)
+{
+	struct uniphier_wdt_dev *wdev = watchdog_get_drvdata(w);
+
+	return __uniphier_watchdog_stop(wdev->regmap);
+}
+
+static int uniphier_watchdog_set_timeout(struct watchdog_device *w,
+					 unsigned int t)
+{
+	struct uniphier_wdt_dev *wdev = watchdog_get_drvdata(w);
+	unsigned int tmp_timeout;
+	int ret;
+
+	tmp_timeout = roundup_pow_of_two(t);
+	if (tmp_timeout == w->timeout)
+		return 0;
+
+	if (watchdog_active(w)) {
+		ret = __uniphier_watchdog_restart(wdev->regmap, tmp_timeout);
+		if (ret)
+			return ret;
+	}
+
+	w->timeout = tmp_timeout;
+
+	return 0;
+}
+
+/*
+ * Kernel Interfaces
+ */
+static const struct watchdog_info uniphier_wdt_info = {
+	.identity	= "uniphier-wdt",
+	.options	= WDIOF_SETTIMEOUT |
+			  WDIOF_KEEPALIVEPING |
+			  WDIOF_MAGICCLOSE |
+			  WDIOF_OVERHEAT,
+};
+
+static const struct watchdog_ops uniphier_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= uniphier_watchdog_start,
+	.stop		= uniphier_watchdog_stop,
+	.ping		= uniphier_watchdog_ping,
+	.set_timeout	= uniphier_watchdog_set_timeout,
+};
+
+static int uniphier_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct uniphier_wdt_dev *wdev;
+	struct regmap *regmap;
+	struct device_node *parent;
+	int ret;
+
+	wdev = devm_kzalloc(dev, sizeof(*wdev), GFP_KERNEL);
+	if (!wdev)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, wdev);
+
+	parent = of_get_parent(dev->of_node); /* parent should be syscon node */
+	regmap = syscon_node_to_regmap(parent);
+	of_node_put(parent);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	wdev->regmap = regmap;
+	wdev->wdt_dev.info = &uniphier_wdt_info;
+	wdev->wdt_dev.ops = &uniphier_wdt_ops;
+	wdev->wdt_dev.max_timeout = WDT_PERIOD_MAX;
+	wdev->wdt_dev.min_timeout = WDT_PERIOD_MIN;
+	wdev->wdt_dev.timeout = WDT_DEFAULT_TIMEOUT;
+	wdev->wdt_dev.parent = dev;
+
+	watchdog_init_timeout(&wdev->wdt_dev, timeout, dev);
+	watchdog_set_nowayout(&wdev->wdt_dev, nowayout);
+	watchdog_stop_on_reboot(&wdev->wdt_dev);
+
+	watchdog_set_drvdata(&wdev->wdt_dev, wdev);
+
+	uniphier_watchdog_stop(&wdev->wdt_dev);
+	ret = regmap_write(wdev->regmap, WDTRSTSEL, WDTRSTSEL_RSTSEL_BOTH);
+	if (ret)
+		return ret;
+
+	ret = devm_watchdog_register_device(dev, &wdev->wdt_dev);
+	if (ret)
+		return ret;
+
+	dev_info(dev, "watchdog driver (timeout=%d sec, nowayout=%d)\n",
+		 wdev->wdt_dev.timeout, nowayout);
+
+	return 0;
+}
+
+static const struct of_device_id uniphier_wdt_dt_ids[] = {
+	{ .compatible = "socionext,uniphier-wdt" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, uniphier_wdt_dt_ids);
+
+static struct platform_driver uniphier_wdt_driver = {
+	.probe		= uniphier_wdt_probe,
+	.driver		= {
+		.name		= "uniphier-wdt",
+		.of_match_table	= uniphier_wdt_dt_ids,
+	},
+};
+
+module_platform_driver(uniphier_wdt_driver);
+
+module_param(timeout, uint, 0000);
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout seconds in power of 2. (0 < timeout < 128, default="
+				__MODULE_STRING(WDT_DEFAULT_TIMEOUT) ")");
+
+module_param(nowayout, bool, 0000);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+MODULE_AUTHOR("Keiji Hayashibara <hayashibara.keiji@socionext.com>");
+MODULE_DESCRIPTION("UniPhier Watchdog Device Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/watchdog/ux500_wdt.c b/drivers/watchdog/ux500_wdt.c
new file mode 100644
index 000000000..37c084353
--- /dev/null
+++ b/drivers/watchdog/ux500_wdt.c
@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011-2013
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Mathieu Poirier <mathieu.poirier@linaro.org> for ST-Ericsson
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/moduleparam.h>
+#include <linux/err.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/ux500_wdt.h>
+
+#include <linux/mfd/dbx500-prcmu.h>
+
+#define WATCHDOG_TIMEOUT 600 /* 10 minutes */
+
+#define WATCHDOG_MIN	0
+#define WATCHDOG_MAX28	268435  /* 28 bit resolution in ms == 268435.455 s */
+#define WATCHDOG_MAX32	4294967 /* 32 bit resolution in ms == 4294967.295 s */
+
+static unsigned int timeout = WATCHDOG_TIMEOUT;
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int ux500_wdt_start(struct watchdog_device *wdd)
+{
+	return prcmu_enable_a9wdog(PRCMU_WDOG_ALL);
+}
+
+static int ux500_wdt_stop(struct watchdog_device *wdd)
+{
+	return prcmu_disable_a9wdog(PRCMU_WDOG_ALL);
+}
+
+static int ux500_wdt_keepalive(struct watchdog_device *wdd)
+{
+	return prcmu_kick_a9wdog(PRCMU_WDOG_ALL);
+}
+
+static int ux500_wdt_set_timeout(struct watchdog_device *wdd,
+				 unsigned int timeout)
+{
+	ux500_wdt_stop(wdd);
+	prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
+	ux500_wdt_start(wdd);
+
+	return 0;
+}
+
+static const struct watchdog_info ux500_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "Ux500 WDT",
+	.firmware_version = 1,
+};
+
+static const struct watchdog_ops ux500_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = ux500_wdt_start,
+	.stop  = ux500_wdt_stop,
+	.ping  = ux500_wdt_keepalive,
+	.set_timeout = ux500_wdt_set_timeout,
+};
+
+static struct watchdog_device ux500_wdt = {
+	.info = &ux500_wdt_info,
+	.ops = &ux500_wdt_ops,
+	.min_timeout = WATCHDOG_MIN,
+	.max_timeout = WATCHDOG_MAX32,
+};
+
+static int ux500_wdt_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct ux500_wdt_data *pdata = dev_get_platdata(&pdev->dev);
+
+	if (pdata) {
+		if (pdata->timeout > 0)
+			timeout = pdata->timeout;
+		if (pdata->has_28_bits_resolution)
+			ux500_wdt.max_timeout = WATCHDOG_MAX28;
+	}
+
+	ux500_wdt.parent = &pdev->dev;
+	watchdog_set_nowayout(&ux500_wdt, nowayout);
+
+	/* disable auto off on sleep */
+	prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false);
+
+	/* set HW initial value */
+	prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
+
+	ret = watchdog_register_device(&ux500_wdt);
+	if (ret)
+		return ret;
+
+	dev_info(&pdev->dev, "initialized\n");
+
+	return 0;
+}
+
+static int ux500_wdt_remove(struct platform_device *dev)
+{
+	watchdog_unregister_device(&ux500_wdt);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ux500_wdt_suspend(struct platform_device *pdev,
+			     pm_message_t state)
+{
+	if (watchdog_active(&ux500_wdt)) {
+		ux500_wdt_stop(&ux500_wdt);
+		prcmu_config_a9wdog(PRCMU_WDOG_CPU1, true);
+
+		prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
+		ux500_wdt_start(&ux500_wdt);
+	}
+	return 0;
+}
+
+static int ux500_wdt_resume(struct platform_device *pdev)
+{
+	if (watchdog_active(&ux500_wdt)) {
+		ux500_wdt_stop(&ux500_wdt);
+		prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false);
+
+		prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000);
+		ux500_wdt_start(&ux500_wdt);
+	}
+	return 0;
+}
+#else
+#define ux500_wdt_suspend NULL
+#define ux500_wdt_resume NULL
+#endif
+
+static struct platform_driver ux500_wdt_driver = {
+	.probe		= ux500_wdt_probe,
+	.remove		= ux500_wdt_remove,
+	.suspend	= ux500_wdt_suspend,
+	.resume		= ux500_wdt_resume,
+	.driver		= {
+		.name	= "ux500_wdt",
+	},
+};
+
+module_platform_driver(ux500_wdt_driver);
+
+MODULE_AUTHOR("Jonas Aaberg <jonas.aberg@stericsson.com>");
+MODULE_DESCRIPTION("Ux500 Watchdog Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ux500_wdt");
diff --git a/drivers/watchdog/via_wdt.c b/drivers/watchdog/via_wdt.c
new file mode 100644
index 000000000..b085ef108
--- /dev/null
+++ b/drivers/watchdog/via_wdt.c
@@ -0,0 +1,261 @@
+/*
+ * VIA Chipset Watchdog Driver
+ *
+ * Copyright (C) 2011 Sigfox
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Marc Vertes <marc.vertes@sigfox.com>
+ * Based on a preliminary version from Harald Welte <HaraldWelte@viatech.com>
+ * Timer code by Wim Van Sebroeck <wim@iguana.be>
+ *
+ * Caveat: PnP must be enabled in BIOS to allow full access to watchdog
+ * control registers. If not, the watchdog must be configured in BIOS manually.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/timer.h>
+#include <linux/watchdog.h>
+
+/* Configuration registers relative to the pci device */
+#define VIA_WDT_MMIO_BASE	0xe8	/* MMIO region base address */
+#define VIA_WDT_CONF		0xec	/* watchdog enable state */
+
+/* Relevant bits for the VIA_WDT_CONF register */
+#define VIA_WDT_CONF_ENABLE	0x01	/* 1: enable watchdog */
+#define VIA_WDT_CONF_MMIO	0x02	/* 1: enable watchdog MMIO */
+
+/*
+ * The MMIO region contains the watchog control register and the
+ * hardware timer counter.
+ */
+#define VIA_WDT_MMIO_LEN	8	/* MMIO region length in bytes */
+#define VIA_WDT_CTL		0	/* MMIO addr+0: state/control reg. */
+#define VIA_WDT_COUNT		4	/* MMIO addr+4: timer counter reg. */
+
+/* Bits for the VIA_WDT_CTL register */
+#define VIA_WDT_RUNNING		0x01	/* 0: stop, 1: running */
+#define VIA_WDT_FIRED		0x02	/* 1: restarted by expired watchdog */
+#define VIA_WDT_PWROFF		0x04	/* 0: reset, 1: poweroff */
+#define VIA_WDT_DISABLED	0x08	/* 1: timer is disabled */
+#define VIA_WDT_TRIGGER		0x80	/* 1: start a new countdown */
+
+/* Hardware heartbeat in seconds */
+#define WDT_HW_HEARTBEAT 1
+
+/* Timer heartbeat (500ms) */
+#define WDT_HEARTBEAT	(HZ/2)	/* should be <= ((WDT_HW_HEARTBEAT*HZ)/2) */
+
+/* User space timeout in seconds */
+#define WDT_TIMEOUT_MAX	1023	/* approx. 17 min. */
+#define WDT_TIMEOUT	60
+static int timeout = WDT_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, between 1 and 1023 "
+	"(default = " __MODULE_STRING(WDT_TIMEOUT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+	"(default = " __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static struct watchdog_device wdt_dev;
+static struct resource wdt_res;
+static void __iomem *wdt_mem;
+static unsigned int mmio;
+static void wdt_timer_tick(struct timer_list *unused);
+static DEFINE_TIMER(timer, wdt_timer_tick);
+					/* The timer that pings the watchdog */
+static unsigned long next_heartbeat;	/* the next_heartbeat for the timer */
+
+static inline void wdt_reset(void)
+{
+	unsigned int ctl = readl(wdt_mem);
+
+	writel(ctl | VIA_WDT_TRIGGER, wdt_mem);
+}
+
+/*
+ * Timer tick: the timer will make sure that the watchdog timer hardware
+ * is being reset in time. The conditions to do this are:
+ *  1) the watchog timer has been started and /dev/watchdog is open
+ *     and there is still time left before userspace should send the
+ *     next heartbeat/ping. (note: the internal heartbeat is much smaller
+ *     then the external/userspace heartbeat).
+ *  2) the watchdog timer has been stopped by userspace.
+ */
+static void wdt_timer_tick(struct timer_list *unused)
+{
+	if (time_before(jiffies, next_heartbeat) ||
+	   (!watchdog_active(&wdt_dev))) {
+		wdt_reset();
+		mod_timer(&timer, jiffies + WDT_HEARTBEAT);
+	} else
+		pr_crit("I will reboot your machine !\n");
+}
+
+static int wdt_ping(struct watchdog_device *wdd)
+{
+	/* calculate when the next userspace timeout will be */
+	next_heartbeat = jiffies + wdd->timeout * HZ;
+	return 0;
+}
+
+static int wdt_start(struct watchdog_device *wdd)
+{
+	unsigned int ctl = readl(wdt_mem);
+
+	writel(wdd->timeout, wdt_mem + VIA_WDT_COUNT);
+	writel(ctl | VIA_WDT_RUNNING | VIA_WDT_TRIGGER, wdt_mem);
+	wdt_ping(wdd);
+	mod_timer(&timer, jiffies + WDT_HEARTBEAT);
+	return 0;
+}
+
+static int wdt_stop(struct watchdog_device *wdd)
+{
+	unsigned int ctl = readl(wdt_mem);
+
+	writel(ctl & ~VIA_WDT_RUNNING, wdt_mem);
+	return 0;
+}
+
+static int wdt_set_timeout(struct watchdog_device *wdd,
+			   unsigned int new_timeout)
+{
+	writel(new_timeout, wdt_mem + VIA_WDT_COUNT);
+	wdd->timeout = new_timeout;
+	return 0;
+}
+
+static const struct watchdog_info wdt_info = {
+	.identity =	"VIA watchdog",
+	.options =	WDIOF_CARDRESET |
+			WDIOF_SETTIMEOUT |
+			WDIOF_MAGICCLOSE |
+			WDIOF_KEEPALIVEPING,
+};
+
+static const struct watchdog_ops wdt_ops = {
+	.owner =	THIS_MODULE,
+	.start =	wdt_start,
+	.stop =		wdt_stop,
+	.ping =		wdt_ping,
+	.set_timeout =	wdt_set_timeout,
+};
+
+static struct watchdog_device wdt_dev = {
+	.info =		&wdt_info,
+	.ops =		&wdt_ops,
+	.min_timeout =	1,
+	.max_timeout =	WDT_TIMEOUT_MAX,
+};
+
+static int wdt_probe(struct pci_dev *pdev,
+			       const struct pci_device_id *ent)
+{
+	unsigned char conf;
+	int ret = -ENODEV;
+
+	if (pci_enable_device(pdev)) {
+		dev_err(&pdev->dev, "cannot enable PCI device\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Allocate a MMIO region which contains watchdog control register
+	 * and counter, then configure the watchdog to use this region.
+	 * This is possible only if PnP is properly enabled in BIOS.
+	 * If not, the watchdog must be configured in BIOS manually.
+	 */
+	if (allocate_resource(&iomem_resource, &wdt_res, VIA_WDT_MMIO_LEN,
+			      0xf0000000, 0xffffff00, 0xff, NULL, NULL)) {
+		dev_err(&pdev->dev, "MMIO allocation failed\n");
+		goto err_out_disable_device;
+	}
+
+	pci_write_config_dword(pdev, VIA_WDT_MMIO_BASE, wdt_res.start);
+	pci_read_config_byte(pdev, VIA_WDT_CONF, &conf);
+	conf |= VIA_WDT_CONF_ENABLE | VIA_WDT_CONF_MMIO;
+	pci_write_config_byte(pdev, VIA_WDT_CONF, conf);
+
+	pci_read_config_dword(pdev, VIA_WDT_MMIO_BASE, &mmio);
+	if (mmio) {
+		dev_info(&pdev->dev, "VIA Chipset watchdog MMIO: %x\n", mmio);
+	} else {
+		dev_err(&pdev->dev, "MMIO setting failed. Check BIOS.\n");
+		goto err_out_resource;
+	}
+
+	if (!request_mem_region(mmio, VIA_WDT_MMIO_LEN, "via_wdt")) {
+		dev_err(&pdev->dev, "MMIO region busy\n");
+		goto err_out_resource;
+	}
+
+	wdt_mem = ioremap(mmio, VIA_WDT_MMIO_LEN);
+	if (wdt_mem == NULL) {
+		dev_err(&pdev->dev, "cannot remap VIA wdt MMIO registers\n");
+		goto err_out_release;
+	}
+
+	if (timeout < 1 || timeout > WDT_TIMEOUT_MAX)
+		timeout = WDT_TIMEOUT;
+
+	wdt_dev.timeout = timeout;
+	wdt_dev.parent = &pdev->dev;
+	watchdog_set_nowayout(&wdt_dev, nowayout);
+	if (readl(wdt_mem) & VIA_WDT_FIRED)
+		wdt_dev.bootstatus |= WDIOF_CARDRESET;
+
+	ret = watchdog_register_device(&wdt_dev);
+	if (ret)
+		goto err_out_iounmap;
+
+	/* start triggering, in case of watchdog already enabled by BIOS */
+	mod_timer(&timer, jiffies + WDT_HEARTBEAT);
+	return 0;
+
+err_out_iounmap:
+	iounmap(wdt_mem);
+err_out_release:
+	release_mem_region(mmio, VIA_WDT_MMIO_LEN);
+err_out_resource:
+	release_resource(&wdt_res);
+err_out_disable_device:
+	pci_disable_device(pdev);
+	return ret;
+}
+
+static void wdt_remove(struct pci_dev *pdev)
+{
+	watchdog_unregister_device(&wdt_dev);
+	del_timer_sync(&timer);
+	iounmap(wdt_mem);
+	release_mem_region(mmio, VIA_WDT_MMIO_LEN);
+	release_resource(&wdt_res);
+	pci_disable_device(pdev);
+}
+
+static const struct pci_device_id wdt_pci_table[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855) },
+	{ 0 }
+};
+
+static struct pci_driver wdt_driver = {
+	.name		= "via_wdt",
+	.id_table	= wdt_pci_table,
+	.probe		= wdt_probe,
+	.remove		= wdt_remove,
+};
+
+module_pci_driver(wdt_driver);
+
+MODULE_AUTHOR("Marc Vertes");
+MODULE_DESCRIPTION("Driver for watchdog timer on VIA chipset");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
new file mode 100644
index 000000000..4b9365d4d
--- /dev/null
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -0,0 +1,504 @@
+/*
+ *	w83627hf/thf WDT driver
+ *
+ *	(c) Copyright 2013 Guenter Roeck
+ *		converted to watchdog infrastructure
+ *
+ *	(c) Copyright 2007 Vlad Drukker <vlad@storewiz.com>
+ *		added support for W83627THF.
+ *
+ *	(c) Copyright 2003,2007 Pádraig Brady <P@draigBrady.com>
+ *
+ *	Based on advantechwdt.c which is based on wdt.c.
+ *	Original copyright messages:
+ *
+ *	(c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
+ *
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ *	warranty for any of this software. This material is provided
+ *	"AS-IS" and at no charge.
+ *
+ *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT"
+#define WATCHDOG_TIMEOUT 60		/* 60 sec default timeout */
+
+static int wdt_io;
+static int cr_wdt_timeout;	/* WDT timeout register */
+static int cr_wdt_control;	/* WDT control register */
+static int cr_wdt_csr;		/* WDT control & status register */
+
+enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf,
+	     w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p,
+	     w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793,
+	     nct6795, nct6796, nct6102 };
+
+static int timeout;			/* in seconds */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+		"Watchdog timeout in seconds. 1 <= timeout <= 255, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int early_disable;
+module_param(early_disable, int, 0);
+MODULE_PARM_DESC(early_disable, "Disable watchdog at boot time (default=0)");
+
+/*
+ *	Kernel methods.
+ */
+
+#define WDT_EFER (wdt_io+0)   /* Extended Function Enable Registers */
+#define WDT_EFIR (wdt_io+0)   /* Extended Function Index Register
+							(same as EFER) */
+#define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */
+
+#define W83627HF_LD_WDT		0x08
+
+#define W83627HF_ID		0x52
+#define W83627S_ID		0x59
+#define W83697HF_ID		0x60
+#define W83697UG_ID		0x68
+#define W83637HF_ID		0x70
+#define W83627THF_ID		0x82
+#define W83687THF_ID		0x85
+#define W83627EHF_ID		0x88
+#define W83627DHG_ID		0xa0
+#define W83627UHG_ID		0xa2
+#define W83667HG_ID		0xa5
+#define W83627DHG_P_ID		0xb0
+#define W83667HG_B_ID		0xb3
+#define NCT6775_ID		0xb4
+#define NCT6776_ID		0xc3
+#define NCT6102_ID		0xc4
+#define NCT6779_ID		0xc5
+#define NCT6791_ID		0xc8
+#define NCT6792_ID		0xc9
+#define NCT6793_ID		0xd1
+#define NCT6795_ID		0xd3
+#define NCT6796_ID		0xd4	/* also NCT9697D, NCT9698D */
+
+#define W83627HF_WDT_TIMEOUT	0xf6
+#define W83697HF_WDT_TIMEOUT	0xf4
+#define NCT6102D_WDT_TIMEOUT	0xf1
+
+#define W83627HF_WDT_CONTROL	0xf5
+#define W83697HF_WDT_CONTROL	0xf3
+#define NCT6102D_WDT_CONTROL	0xf0
+
+#define W836X7HF_WDT_CSR	0xf7
+#define NCT6102D_WDT_CSR	0xf2
+
+static void superio_outb(int reg, int val)
+{
+	outb(reg, WDT_EFER);
+	outb(val, WDT_EFDR);
+}
+
+static inline int superio_inb(int reg)
+{
+	outb(reg, WDT_EFER);
+	return inb(WDT_EFDR);
+}
+
+static int superio_enter(void)
+{
+	if (!request_muxed_region(wdt_io, 2, WATCHDOG_NAME))
+		return -EBUSY;
+
+	outb_p(0x87, WDT_EFER); /* Enter extended function mode */
+	outb_p(0x87, WDT_EFER); /* Again according to manual */
+
+	return 0;
+}
+
+static void superio_select(int ld)
+{
+	superio_outb(0x07, ld);
+}
+
+static void superio_exit(void)
+{
+	outb_p(0xAA, WDT_EFER); /* Leave extended function mode */
+	release_region(wdt_io, 2);
+}
+
+static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
+{
+	int ret;
+	unsigned char t;
+
+	ret = superio_enter();
+	if (ret)
+		return ret;
+
+	superio_select(W83627HF_LD_WDT);
+
+	/* set CR30 bit 0 to activate GPIO2 */
+	t = superio_inb(0x30);
+	if (!(t & 0x01))
+		superio_outb(0x30, t | 0x01);
+
+	switch (chip) {
+	case w83627hf:
+	case w83627s:
+		t = superio_inb(0x2B) & ~0x10;
+		superio_outb(0x2B, t); /* set GPIO24 to WDT0 */
+		break;
+	case w83697hf:
+		/* Set pin 119 to WDTO# mode (= CR29, WDT0) */
+		t = superio_inb(0x29) & ~0x60;
+		t |= 0x20;
+		superio_outb(0x29, t);
+		break;
+	case w83697ug:
+		/* Set pin 118 to WDTO# mode */
+		t = superio_inb(0x2b) & ~0x04;
+		superio_outb(0x2b, t);
+		break;
+	case w83627thf:
+		t = (superio_inb(0x2B) & ~0x08) | 0x04;
+		superio_outb(0x2B, t); /* set GPIO3 to WDT0 */
+		break;
+	case w83627dhg:
+	case w83627dhg_p:
+		t = superio_inb(0x2D) & ~0x01; /* PIN77 -> WDT0# */
+		superio_outb(0x2D, t); /* set GPIO5 to WDT0 */
+		t = superio_inb(cr_wdt_control);
+		t |= 0x02;	/* enable the WDTO# output low pulse
+				 * to the KBRST# pin */
+		superio_outb(cr_wdt_control, t);
+		break;
+	case w83637hf:
+		break;
+	case w83687thf:
+		t = superio_inb(0x2C) & ~0x80; /* PIN47 -> WDT0# */
+		superio_outb(0x2C, t);
+		break;
+	case w83627ehf:
+	case w83627uhg:
+	case w83667hg:
+	case w83667hg_b:
+	case nct6775:
+	case nct6776:
+	case nct6779:
+	case nct6791:
+	case nct6792:
+	case nct6793:
+	case nct6795:
+	case nct6796:
+	case nct6102:
+		/*
+		 * These chips have a fixed WDTO# output pin (W83627UHG),
+		 * or support more than one WDTO# output pin.
+		 * Don't touch its configuration, and hope the BIOS
+		 * does the right thing.
+		 */
+		t = superio_inb(cr_wdt_control);
+		t |= 0x02;	/* enable the WDTO# output low pulse
+				 * to the KBRST# pin */
+		superio_outb(cr_wdt_control, t);
+		break;
+	default:
+		break;
+	}
+
+	t = superio_inb(cr_wdt_timeout);
+	if (t != 0) {
+		if (early_disable) {
+			pr_warn("Stopping previously enabled watchdog until userland kicks in\n");
+			superio_outb(cr_wdt_timeout, 0);
+		} else {
+			pr_info("Watchdog already running. Resetting timeout to %d sec\n",
+				wdog->timeout);
+			superio_outb(cr_wdt_timeout, wdog->timeout);
+		}
+	}
+
+	/* set second mode & disable keyboard turning off watchdog */
+	t = superio_inb(cr_wdt_control) & ~0x0C;
+	superio_outb(cr_wdt_control, t);
+
+	/* reset trigger, disable keyboard & mouse turning off watchdog */
+	t = superio_inb(cr_wdt_csr) & ~0xD0;
+	superio_outb(cr_wdt_csr, t);
+
+	superio_exit();
+
+	return 0;
+}
+
+static int wdt_set_time(unsigned int timeout)
+{
+	int ret;
+
+	ret = superio_enter();
+	if (ret)
+		return ret;
+
+	superio_select(W83627HF_LD_WDT);
+	superio_outb(cr_wdt_timeout, timeout);
+	superio_exit();
+
+	return 0;
+}
+
+static int wdt_start(struct watchdog_device *wdog)
+{
+	return wdt_set_time(wdog->timeout);
+}
+
+static int wdt_stop(struct watchdog_device *wdog)
+{
+	return wdt_set_time(0);
+}
+
+static int wdt_set_timeout(struct watchdog_device *wdog, unsigned int timeout)
+{
+	wdog->timeout = timeout;
+
+	return 0;
+}
+
+static unsigned int wdt_get_time(struct watchdog_device *wdog)
+{
+	unsigned int timeleft;
+	int ret;
+
+	ret = superio_enter();
+	if (ret)
+		return 0;
+
+	superio_select(W83627HF_LD_WDT);
+	timeleft = superio_inb(cr_wdt_timeout);
+	superio_exit();
+
+	return timeleft;
+}
+
+/*
+ *	Kernel Interfaces
+ */
+
+static const struct watchdog_info wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "W83627HF Watchdog",
+};
+
+static const struct watchdog_ops wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = wdt_start,
+	.stop = wdt_stop,
+	.set_timeout = wdt_set_timeout,
+	.get_timeleft = wdt_get_time,
+};
+
+static struct watchdog_device wdt_dev = {
+	.info = &wdt_info,
+	.ops = &wdt_ops,
+	.timeout = WATCHDOG_TIMEOUT,
+	.min_timeout = 1,
+	.max_timeout = 255,
+};
+
+/*
+ *	The WDT needs to learn about soft shutdowns in order to
+ *	turn the timebomb registers off.
+ */
+
+static int wdt_find(int addr)
+{
+	u8 val;
+	int ret;
+
+	cr_wdt_timeout = W83627HF_WDT_TIMEOUT;
+	cr_wdt_control = W83627HF_WDT_CONTROL;
+	cr_wdt_csr = W836X7HF_WDT_CSR;
+
+	ret = superio_enter();
+	if (ret)
+		return ret;
+	superio_select(W83627HF_LD_WDT);
+	val = superio_inb(0x20);
+	switch (val) {
+	case W83627HF_ID:
+		ret = w83627hf;
+		break;
+	case W83627S_ID:
+		ret = w83627s;
+		break;
+	case W83697HF_ID:
+		ret = w83697hf;
+		cr_wdt_timeout = W83697HF_WDT_TIMEOUT;
+		cr_wdt_control = W83697HF_WDT_CONTROL;
+		break;
+	case W83697UG_ID:
+		ret = w83697ug;
+		cr_wdt_timeout = W83697HF_WDT_TIMEOUT;
+		cr_wdt_control = W83697HF_WDT_CONTROL;
+		break;
+	case W83637HF_ID:
+		ret = w83637hf;
+		break;
+	case W83627THF_ID:
+		ret = w83627thf;
+		break;
+	case W83687THF_ID:
+		ret = w83687thf;
+		break;
+	case W83627EHF_ID:
+		ret = w83627ehf;
+		break;
+	case W83627DHG_ID:
+		ret = w83627dhg;
+		break;
+	case W83627DHG_P_ID:
+		ret = w83627dhg_p;
+		break;
+	case W83627UHG_ID:
+		ret = w83627uhg;
+		break;
+	case W83667HG_ID:
+		ret = w83667hg;
+		break;
+	case W83667HG_B_ID:
+		ret = w83667hg_b;
+		break;
+	case NCT6775_ID:
+		ret = nct6775;
+		break;
+	case NCT6776_ID:
+		ret = nct6776;
+		break;
+	case NCT6779_ID:
+		ret = nct6779;
+		break;
+	case NCT6791_ID:
+		ret = nct6791;
+		break;
+	case NCT6792_ID:
+		ret = nct6792;
+		break;
+	case NCT6793_ID:
+		ret = nct6793;
+		break;
+	case NCT6795_ID:
+		ret = nct6795;
+		break;
+	case NCT6796_ID:
+		ret = nct6796;
+		break;
+	case NCT6102_ID:
+		ret = nct6102;
+		cr_wdt_timeout = NCT6102D_WDT_TIMEOUT;
+		cr_wdt_control = NCT6102D_WDT_CONTROL;
+		cr_wdt_csr = NCT6102D_WDT_CSR;
+		break;
+	case 0xff:
+		ret = -ENODEV;
+		break;
+	default:
+		ret = -ENODEV;
+		pr_err("Unsupported chip ID: 0x%02x\n", val);
+		break;
+	}
+	superio_exit();
+	return ret;
+}
+
+static int __init wdt_init(void)
+{
+	int ret;
+	int chip;
+	static const char * const chip_name[] = {
+		"W83627HF",
+		"W83627S",
+		"W83697HF",
+		"W83697UG",
+		"W83637HF",
+		"W83627THF",
+		"W83687THF",
+		"W83627EHF",
+		"W83627DHG",
+		"W83627UHG",
+		"W83667HG",
+		"W83667DHG-P",
+		"W83667HG-B",
+		"NCT6775",
+		"NCT6776",
+		"NCT6779",
+		"NCT6791",
+		"NCT6792",
+		"NCT6793",
+		"NCT6795",
+		"NCT6796",
+		"NCT6102",
+	};
+
+	wdt_io = 0x2e;
+	chip = wdt_find(0x2e);
+	if (chip < 0) {
+		wdt_io = 0x4e;
+		chip = wdt_find(0x4e);
+		if (chip < 0)
+			return chip;
+	}
+
+	pr_info("WDT driver for %s Super I/O chip initialising\n",
+		chip_name[chip]);
+
+	watchdog_init_timeout(&wdt_dev, timeout, NULL);
+	watchdog_set_nowayout(&wdt_dev, nowayout);
+	watchdog_stop_on_reboot(&wdt_dev);
+
+	ret = w83627hf_init(&wdt_dev, chip);
+	if (ret) {
+		pr_err("failed to initialize watchdog (err=%d)\n", ret);
+		return ret;
+	}
+
+	ret = watchdog_register_device(&wdt_dev);
+	if (ret)
+		return ret;
+
+	pr_info("initialized. timeout=%d sec (nowayout=%d)\n",
+		wdt_dev.timeout, nowayout);
+
+	return ret;
+}
+
+static void __exit wdt_exit(void)
+{
+	watchdog_unregister_device(&wdt_dev);
+}
+
+module_init(wdt_init);
+module_exit(wdt_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Pádraig  Brady <P@draigBrady.com>");
+MODULE_DESCRIPTION("w83627hf/thf WDT driver");
diff --git a/drivers/watchdog/w83877f_wdt.c b/drivers/watchdog/w83877f_wdt.c
new file mode 100644
index 000000000..ec4641fc2
--- /dev/null
+++ b/drivers/watchdog/w83877f_wdt.c
@@ -0,0 +1,408 @@
+/*
+ *	W83877F Computer Watchdog Timer driver
+ *
+ *      Based on acquirewdt.c by Alan Cox,
+ *           and sbc60xxwdt.c by Jakob Oestergaard <jakob@unthought.net>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	The authors do NOT admit liability nor provide warranty for
+ *	any of this software. This material is provided "AS-IS" in
+ *      the hope that it may be useful for others.
+ *
+ *	(c) Copyright 2001    Scott Jennings <linuxdrivers@oro.net>
+ *
+ *           4/19 - 2001      [Initial revision]
+ *           9/27 - 2001      Added spinlocking
+ *           4/12 - 2002      [rob@osinvestor.com] Eliminate extra comments
+ *                            Eliminate fop_read
+ *                            Eliminate extra spin_unlock
+ *                            Added KERN_* tags to printks
+ *                            add CONFIG_WATCHDOG_NOWAYOUT support
+ *                            fix possible wdt_is_open race
+ *                            changed watchdog_info to correctly reflect what
+ *			      the driver offers
+ *                            added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS,
+ *			      WDIOC_SETTIMEOUT,
+ *                            WDIOC_GETTIMEOUT, and WDIOC_SETOPTIONS ioctls
+ *           09/8 - 2003      [wim@iguana.be] cleanup of trailing spaces
+ *                            added extra printk's for startup problems
+ *                            use module_param
+ *                            made timeout (the emulated heartbeat) a
+ *			      module_param
+ *                            made the keepalive ping an internal subroutine
+ *
+ *  This WDT driver is different from most other Linux WDT
+ *  drivers in that the driver will ping the watchdog by itself,
+ *  because this particular WDT has a very short timeout (1.6
+ *  seconds) and it would be insane to count on any userspace
+ *  daemon always getting scheduled within that time frame.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#define OUR_NAME "w83877f_wdt"
+
+#define ENABLE_W83877F_PORT 0x3F0
+#define ENABLE_W83877F 0x87
+#define DISABLE_W83877F 0xAA
+#define WDT_PING 0x443
+#define WDT_REGISTER 0x14
+#define WDT_ENABLE 0x9C
+#define WDT_DISABLE 0x8C
+
+/*
+ * The W83877F seems to be fixed at 1.6s timeout (at least on the
+ * EMACS PC-104 board I'm using). If we reset the watchdog every
+ * ~250ms we should be safe.  */
+
+#define WDT_INTERVAL (HZ/4+1)
+
+/*
+ * We must not require too good response from the userspace daemon.
+ * Here we require the userspace daemon to send us a heartbeat
+ * char to /dev/watchdog every 30 seconds.
+ */
+
+#define WATCHDOG_TIMEOUT 30            /* 30 sec default timeout */
+/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */
+static int timeout = WATCHDOG_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. (1<=timeout<=3600, default="
+				__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static void wdt_timer_ping(struct timer_list *);
+static DEFINE_TIMER(timer, wdt_timer_ping);
+static unsigned long next_heartbeat;
+static unsigned long wdt_is_open;
+static char wdt_expect_close;
+static DEFINE_SPINLOCK(wdt_spinlock);
+
+/*
+ *	Whack the dog
+ */
+
+static void wdt_timer_ping(struct timer_list *unused)
+{
+	/* If we got a heartbeat pulse within the WDT_US_INTERVAL
+	 * we agree to ping the WDT
+	 */
+	if (time_before(jiffies, next_heartbeat)) {
+		/* Ping the WDT */
+		spin_lock(&wdt_spinlock);
+
+		/* Ping the WDT by reading from WDT_PING */
+		inb_p(WDT_PING);
+
+		/* Re-set the timer interval */
+		mod_timer(&timer, jiffies + WDT_INTERVAL);
+
+		spin_unlock(&wdt_spinlock);
+
+	} else
+		pr_warn("Heartbeat lost! Will not ping the watchdog\n");
+}
+
+/*
+ * Utility routines
+ */
+
+static void wdt_change(int writeval)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&wdt_spinlock, flags);
+
+	/* buy some time */
+	inb_p(WDT_PING);
+
+	/* make W83877F available */
+	outb_p(ENABLE_W83877F,  ENABLE_W83877F_PORT);
+	outb_p(ENABLE_W83877F,  ENABLE_W83877F_PORT);
+
+	/* enable watchdog */
+	outb_p(WDT_REGISTER,    ENABLE_W83877F_PORT);
+	outb_p(writeval,        ENABLE_W83877F_PORT+1);
+
+	/* lock the W8387FF away */
+	outb_p(DISABLE_W83877F, ENABLE_W83877F_PORT);
+
+	spin_unlock_irqrestore(&wdt_spinlock, flags);
+}
+
+static void wdt_startup(void)
+{
+	next_heartbeat = jiffies + (timeout * HZ);
+
+	/* Start the timer */
+	mod_timer(&timer, jiffies + WDT_INTERVAL);
+
+	wdt_change(WDT_ENABLE);
+
+	pr_info("Watchdog timer is now enabled\n");
+}
+
+static void wdt_turnoff(void)
+{
+	/* Stop the timer */
+	del_timer_sync(&timer);
+
+	wdt_change(WDT_DISABLE);
+
+	pr_info("Watchdog timer is now disabled...\n");
+}
+
+static void wdt_keepalive(void)
+{
+	/* user land ping */
+	next_heartbeat = jiffies + (timeout * HZ);
+}
+
+/*
+ * /dev/watchdog handling
+ */
+
+static ssize_t fop_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
+{
+	/* See if we got the magic character 'V' and reload the timer */
+	if (count) {
+		if (!nowayout) {
+			size_t ofs;
+
+			/* note: just in case someone wrote the magic
+			   character five months ago... */
+			wdt_expect_close = 0;
+
+			/* scan to see whether or not we got the
+			   magic character */
+			for (ofs = 0; ofs != count; ofs++) {
+				char c;
+				if (get_user(c, buf + ofs))
+					return -EFAULT;
+				if (c == 'V')
+					wdt_expect_close = 42;
+			}
+		}
+
+		/* someone wrote to us, we should restart timer */
+		wdt_keepalive();
+	}
+	return count;
+}
+
+static int fop_open(struct inode *inode, struct file *file)
+{
+	/* Just in case we're already talking to someone... */
+	if (test_and_set_bit(0, &wdt_is_open))
+		return -EBUSY;
+
+	/* Good, fire up the show */
+	wdt_startup();
+	return nonseekable_open(inode, file);
+}
+
+static int fop_close(struct inode *inode, struct file *file)
+{
+	if (wdt_expect_close == 42)
+		wdt_turnoff();
+	else {
+		del_timer(&timer);
+		pr_crit("device file closed unexpectedly. Will not stop the WDT!\n");
+	}
+	clear_bit(0, &wdt_is_open);
+	wdt_expect_close = 0;
+	return 0;
+}
+
+static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT
+							| WDIOF_MAGICCLOSE,
+		.firmware_version = 1,
+		.identity = "W83877F",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_SETOPTIONS:
+	{
+		int new_options, retval = -EINVAL;
+
+		if (get_user(new_options, p))
+			return -EFAULT;
+
+		if (new_options & WDIOS_DISABLECARD) {
+			wdt_turnoff();
+			retval = 0;
+		}
+
+		if (new_options & WDIOS_ENABLECARD) {
+			wdt_startup();
+			retval = 0;
+		}
+
+		return retval;
+	}
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+	{
+		int new_timeout;
+
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+
+		/* arbitrary upper limit */
+		if (new_timeout < 1 || new_timeout > 3600)
+			return -EINVAL;
+
+		timeout = new_timeout;
+		wdt_keepalive();
+		/* Fall through */
+	}
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+	default:
+		return -ENOTTY;
+	}
+}
+
+static const struct file_operations wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= fop_write,
+	.open		= fop_open,
+	.release	= fop_close,
+	.unlocked_ioctl	= fop_ioctl,
+};
+
+static struct miscdevice wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &wdt_fops,
+};
+
+/*
+ *	Notifier for system down
+ */
+
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
+	void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		wdt_turnoff();
+	return NOTIFY_DONE;
+}
+
+/*
+ *	The WDT needs to learn about soft shutdowns in order to
+ *	turn the timebomb registers off.
+ */
+
+static struct notifier_block wdt_notifier = {
+	.notifier_call = wdt_notify_sys,
+};
+
+static void __exit w83877f_wdt_unload(void)
+{
+	wdt_turnoff();
+
+	/* Deregister */
+	misc_deregister(&wdt_miscdev);
+
+	unregister_reboot_notifier(&wdt_notifier);
+	release_region(WDT_PING, 1);
+	release_region(ENABLE_W83877F_PORT, 2);
+}
+
+static int __init w83877f_wdt_init(void)
+{
+	int rc = -EBUSY;
+
+	if (timeout < 1 || timeout > 3600) { /* arbitrary upper limit */
+		timeout = WATCHDOG_TIMEOUT;
+		pr_info("timeout value must be 1 <= x <= 3600, using %d\n",
+			timeout);
+	}
+
+	if (!request_region(ENABLE_W83877F_PORT, 2, "W83877F WDT")) {
+		pr_err("I/O address 0x%04x already in use\n",
+		       ENABLE_W83877F_PORT);
+		rc = -EIO;
+		goto err_out;
+	}
+
+	if (!request_region(WDT_PING, 1, "W8387FF WDT")) {
+		pr_err("I/O address 0x%04x already in use\n", WDT_PING);
+		rc = -EIO;
+		goto err_out_region1;
+	}
+
+	rc = register_reboot_notifier(&wdt_notifier);
+	if (rc) {
+		pr_err("cannot register reboot notifier (err=%d)\n", rc);
+		goto err_out_region2;
+	}
+
+	rc = misc_register(&wdt_miscdev);
+	if (rc) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       wdt_miscdev.minor, rc);
+		goto err_out_reboot;
+	}
+
+	pr_info("WDT driver for W83877F initialised. timeout=%d sec (nowayout=%d)\n",
+		timeout, nowayout);
+
+	return 0;
+
+err_out_reboot:
+	unregister_reboot_notifier(&wdt_notifier);
+err_out_region2:
+	release_region(WDT_PING, 1);
+err_out_region1:
+	release_region(ENABLE_W83877F_PORT, 2);
+err_out:
+	return rc;
+}
+
+module_init(w83877f_wdt_init);
+module_exit(w83877f_wdt_unload);
+
+MODULE_AUTHOR("Scott and Bill Jennings");
+MODULE_DESCRIPTION("Driver for watchdog timer in w83877f chip");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/w83977f_wdt.c b/drivers/watchdog/w83977f_wdt.c
new file mode 100644
index 000000000..672b61a7f
--- /dev/null
+++ b/drivers/watchdog/w83977f_wdt.c
@@ -0,0 +1,529 @@
+/*
+ *	W83977F Watchdog Timer Driver for Winbond W83977F I/O Chip
+ *
+ *	(c) Copyright 2005  Jose Goncalves <jose.goncalves@inov.pt>
+ *
+ *      Based on w83877f_wdt.c by Scott Jennings,
+ *           and wdt977.c by Woody Suwalski
+ *
+ *			-----------------------
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/watchdog.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+
+#define WATCHDOG_VERSION  "1.00"
+#define WATCHDOG_NAME     "W83977F WDT"
+
+#define IO_INDEX_PORT     0x3F0
+#define IO_DATA_PORT      (IO_INDEX_PORT+1)
+
+#define UNLOCK_DATA       0x87
+#define LOCK_DATA         0xAA
+#define DEVICE_REGISTER   0x07
+
+#define	DEFAULT_TIMEOUT   45		/* default timeout in seconds */
+
+static	int timeout = DEFAULT_TIMEOUT;
+static	int timeoutW;			/* timeout in watchdog counter units */
+static	unsigned long timer_alive;
+static	int testmode;
+static	char expect_close;
+static	DEFINE_SPINLOCK(spinlock);
+
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+		"Watchdog timeout in seconds (15..7635), default="
+				__MODULE_STRING(DEFAULT_TIMEOUT) ")");
+module_param(testmode, int, 0);
+MODULE_PARM_DESC(testmode, "Watchdog testmode (1 = no reboot), default=0");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/*
+ * Start the watchdog
+ */
+
+static int wdt_start(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&spinlock, flags);
+
+	/* Unlock the SuperIO chip */
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+
+	/*
+	 * Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4.
+	 * F2 has the timeout in watchdog counter units.
+	 * F3 is set to enable watchdog LED blink at timeout.
+	 * F4 is used to just clear the TIMEOUT'ed state (bit 0).
+	 */
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF2, IO_INDEX_PORT);
+	outb_p(timeoutW, IO_DATA_PORT);
+	outb_p(0xF3, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF4, IO_INDEX_PORT);
+	outb_p(0x00, IO_DATA_PORT);
+
+	/* Set device Aux2 active */
+	outb_p(0x30, IO_INDEX_PORT);
+	outb_p(0x01, IO_DATA_PORT);
+
+	/*
+	 * Select device Aux1 (dev=7) to set GP16 as the watchdog output
+	 * (in reg E6) and GP13 as the watchdog LED output (in reg E3).
+	 * Map GP16 at pin 119.
+	 * In test mode watch the bit 0 on F4 to indicate "triggered" or
+	 * check watchdog LED on SBC.
+	 */
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x07, IO_DATA_PORT);
+	if (!testmode) {
+		unsigned pin_map;
+
+		outb_p(0xE6, IO_INDEX_PORT);
+		outb_p(0x0A, IO_DATA_PORT);
+		outb_p(0x2C, IO_INDEX_PORT);
+		pin_map = inb_p(IO_DATA_PORT);
+		pin_map |= 0x10;
+		pin_map &= ~(0x20);
+		outb_p(0x2C, IO_INDEX_PORT);
+		outb_p(pin_map, IO_DATA_PORT);
+	}
+	outb_p(0xE3, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+
+	/* Set device Aux1 active */
+	outb_p(0x30, IO_INDEX_PORT);
+	outb_p(0x01, IO_DATA_PORT);
+
+	/* Lock the SuperIO chip */
+	outb_p(LOCK_DATA, IO_INDEX_PORT);
+
+	spin_unlock_irqrestore(&spinlock, flags);
+
+	pr_info("activated\n");
+
+	return 0;
+}
+
+/*
+ * Stop the watchdog
+ */
+
+static int wdt_stop(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&spinlock, flags);
+
+	/* Unlock the SuperIO chip */
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+
+	/*
+	 * Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4.
+	 * F2 is reset to its default value (watchdog timer disabled).
+	 * F3 is reset to its default state.
+	 * F4 clears the TIMEOUT'ed state (bit 0) - back to default.
+	 */
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF2, IO_INDEX_PORT);
+	outb_p(0xFF, IO_DATA_PORT);
+	outb_p(0xF3, IO_INDEX_PORT);
+	outb_p(0x00, IO_DATA_PORT);
+	outb_p(0xF4, IO_INDEX_PORT);
+	outb_p(0x00, IO_DATA_PORT);
+	outb_p(0xF2, IO_INDEX_PORT);
+	outb_p(0x00, IO_DATA_PORT);
+
+	/*
+	 * Select device Aux1 (dev=7) to set GP16 (in reg E6) and
+	 * Gp13 (in reg E3) as inputs.
+	 */
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x07, IO_DATA_PORT);
+	if (!testmode) {
+		outb_p(0xE6, IO_INDEX_PORT);
+		outb_p(0x01, IO_DATA_PORT);
+	}
+	outb_p(0xE3, IO_INDEX_PORT);
+	outb_p(0x01, IO_DATA_PORT);
+
+	/* Lock the SuperIO chip */
+	outb_p(LOCK_DATA, IO_INDEX_PORT);
+
+	spin_unlock_irqrestore(&spinlock, flags);
+
+	pr_info("shutdown\n");
+
+	return 0;
+}
+
+/*
+ * Send a keepalive ping to the watchdog
+ * This is done by simply re-writing the timeout to reg. 0xF2
+ */
+
+static int wdt_keepalive(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&spinlock, flags);
+
+	/* Unlock the SuperIO chip */
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+
+	/* Select device Aux2 (device=8) to kick watchdog reg F2 */
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF2, IO_INDEX_PORT);
+	outb_p(timeoutW, IO_DATA_PORT);
+
+	/* Lock the SuperIO chip */
+	outb_p(LOCK_DATA, IO_INDEX_PORT);
+
+	spin_unlock_irqrestore(&spinlock, flags);
+
+	return 0;
+}
+
+/*
+ * Set the watchdog timeout value
+ */
+
+static int wdt_set_timeout(int t)
+{
+	unsigned int tmrval;
+
+	/*
+	 * Convert seconds to watchdog counter time units, rounding up.
+	 * On PCM-5335 watchdog units are 30 seconds/step with 15 sec startup
+	 * value. This information is supplied in the PCM-5335 manual and was
+	 * checked by me on a real board. This is a bit strange because W83977f
+	 * datasheet says counter unit is in minutes!
+	 */
+	if (t < 15)
+		return -EINVAL;
+
+	tmrval = ((t + 15) + 29) / 30;
+
+	if (tmrval > 255)
+		return -EINVAL;
+
+	/*
+	 * timeout is the timeout in seconds,
+	 * timeoutW is the timeout in watchdog counter units.
+	 */
+	timeoutW = tmrval;
+	timeout = (timeoutW * 30) - 15;
+	return 0;
+}
+
+/*
+ * Get the watchdog status
+ */
+
+static int wdt_get_status(int *status)
+{
+	int new_status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&spinlock, flags);
+
+	/* Unlock the SuperIO chip */
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+
+	/* Select device Aux2 (device=8) to read watchdog reg F4 */
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF4, IO_INDEX_PORT);
+	new_status = inb_p(IO_DATA_PORT);
+
+	/* Lock the SuperIO chip */
+	outb_p(LOCK_DATA, IO_INDEX_PORT);
+
+	spin_unlock_irqrestore(&spinlock, flags);
+
+	*status = 0;
+	if (new_status & 1)
+		*status |= WDIOF_CARDRESET;
+
+	return 0;
+}
+
+
+/*
+ *	/dev/watchdog handling
+ */
+
+static int wdt_open(struct inode *inode, struct file *file)
+{
+	/* If the watchdog is alive we don't need to start it again */
+	if (test_and_set_bit(0, &timer_alive))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	wdt_start();
+	return nonseekable_open(inode, file);
+}
+
+static int wdt_release(struct inode *inode, struct file *file)
+{
+	/*
+	 * Shut off the timer.
+	 * Lock it in if it's a module and we set nowayout
+	 */
+	if (expect_close == 42) {
+		wdt_stop();
+		clear_bit(0, &timer_alive);
+	} else {
+		wdt_keepalive();
+		pr_crit("unexpected close, not stopping watchdog!\n");
+	}
+	expect_close = 0;
+	return 0;
+}
+
+/*
+ *      wdt_write:
+ *      @file: file handle to the watchdog
+ *      @buf: buffer to write (unused as data does not matter here
+ *      @count: count of bytes
+ *      @ppos: pointer to the position to write. No seeks allowed
+ *
+ *      A write to a watchdog device is defined as a keepalive signal. Any
+ *      write of data will do, as we we don't define content meaning.
+ */
+
+static ssize_t wdt_write(struct file *file, const char __user *buf,
+			    size_t count, loff_t *ppos)
+{
+	/* See if we got the magic character 'V' and reload the timer */
+	if (count) {
+		if (!nowayout) {
+			size_t ofs;
+
+			/* note: just in case someone wrote the
+			   magic character long ago */
+			expect_close = 0;
+
+			/* scan to see whether or not we got the
+			   magic character */
+			for (ofs = 0; ofs != count; ofs++) {
+				char c;
+				if (get_user(c, buf + ofs))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+
+		/* someone wrote to us, we should restart timer */
+		wdt_keepalive();
+	}
+	return count;
+}
+
+/*
+ *      wdt_ioctl:
+ *      @inode: inode of the device
+ *      @file: file handle to the device
+ *      @cmd: watchdog command
+ *      @arg: argument pointer
+ *
+ *      The watchdog API defines a common set of functions for all watchdogs
+ *      according to their available features.
+ */
+
+static const struct watchdog_info ident = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+	.firmware_version =	1,
+	.identity = WATCHDOG_NAME,
+};
+
+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	int status;
+	int new_options, retval = -EINVAL;
+	int new_timeout;
+	union {
+		struct watchdog_info __user *ident;
+		int __user *i;
+	} uarg;
+
+	uarg.i = (int __user *)arg;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(uarg.ident, &ident,
+						sizeof(ident)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+		wdt_get_status(&status);
+		return put_user(status, uarg.i);
+
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, uarg.i);
+
+	case WDIOC_SETOPTIONS:
+		if (get_user(new_options, uarg.i))
+			return -EFAULT;
+
+		if (new_options & WDIOS_DISABLECARD) {
+			wdt_stop();
+			retval = 0;
+		}
+
+		if (new_options & WDIOS_ENABLECARD) {
+			wdt_start();
+			retval = 0;
+		}
+
+		return retval;
+
+	case WDIOC_KEEPALIVE:
+		wdt_keepalive();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, uarg.i))
+			return -EFAULT;
+
+		if (wdt_set_timeout(new_timeout))
+			return -EINVAL;
+
+		wdt_keepalive();
+		/* Fall through */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, uarg.i);
+
+	default:
+		return -ENOTTY;
+
+	}
+}
+
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
+	void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		wdt_stop();
+	return NOTIFY_DONE;
+}
+
+static const struct file_operations wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= wdt_write,
+	.unlocked_ioctl	= wdt_ioctl,
+	.open		= wdt_open,
+	.release	= wdt_release,
+};
+
+static struct miscdevice wdt_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &wdt_fops,
+};
+
+static struct notifier_block wdt_notifier = {
+	.notifier_call = wdt_notify_sys,
+};
+
+static int __init w83977f_wdt_init(void)
+{
+	int rc;
+
+	pr_info("driver v%s\n", WATCHDOG_VERSION);
+
+	/*
+	 * Check that the timeout value is within it's range;
+	 * if not reset to the default
+	 */
+	if (wdt_set_timeout(timeout)) {
+		wdt_set_timeout(DEFAULT_TIMEOUT);
+		pr_info("timeout value must be 15 <= timeout <= 7635, using %d\n",
+			DEFAULT_TIMEOUT);
+	}
+
+	if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME)) {
+		pr_err("I/O address 0x%04x already in use\n", IO_INDEX_PORT);
+		rc = -EIO;
+		goto err_out;
+	}
+
+	rc = register_reboot_notifier(&wdt_notifier);
+	if (rc) {
+		pr_err("cannot register reboot notifier (err=%d)\n", rc);
+		goto err_out_region;
+	}
+
+	rc = misc_register(&wdt_miscdev);
+	if (rc) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       wdt_miscdev.minor, rc);
+		goto err_out_reboot;
+	}
+
+	pr_info("initialized. timeout=%d sec (nowayout=%d testmode=%d)\n",
+		timeout, nowayout, testmode);
+
+	return 0;
+
+err_out_reboot:
+	unregister_reboot_notifier(&wdt_notifier);
+err_out_region:
+	release_region(IO_INDEX_PORT, 2);
+err_out:
+	return rc;
+}
+
+static void __exit w83977f_wdt_exit(void)
+{
+	wdt_stop();
+	misc_deregister(&wdt_miscdev);
+	unregister_reboot_notifier(&wdt_notifier);
+	release_region(IO_INDEX_PORT, 2);
+}
+
+module_init(w83977f_wdt_init);
+module_exit(w83977f_wdt_exit);
+
+MODULE_AUTHOR("Jose Goncalves <jose.goncalves@inov.pt>");
+MODULE_DESCRIPTION("Driver for watchdog timer in W83977F I/O chip");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c
new file mode 100644
index 000000000..93c5b610e
--- /dev/null
+++ b/drivers/watchdog/wafer5823wdt.c
@@ -0,0 +1,326 @@
+/*
+ *	ICP Wafer 5823 Single Board Computer WDT driver
+ *	http://www.icpamerica.com/wafer_5823.php
+ *	May also work on other similar models
+ *
+ *	(c) Copyright 2002 Justin Cormack <justin@street-vision.com>
+ *
+ *	Release 0.02
+ *
+ *	Based on advantechwdt.c which is based on wdt.c.
+ *	Original copyright messages:
+ *
+ *	(c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ *	warranty for any of this software. This material is provided
+ *	"AS-IS" and at no charge.
+ *
+ *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#define WATCHDOG_NAME "Wafer 5823 WDT"
+#define PFX WATCHDOG_NAME ": "
+#define WD_TIMO 60			/* 60 sec default timeout */
+
+static unsigned long wafwdt_is_open;
+static char expect_close;
+static DEFINE_SPINLOCK(wafwdt_lock);
+
+/*
+ *	You must set these - there is no sane way to probe for this board.
+ *
+ *	To enable, write the timeout value in seconds (1 to 255) to I/O
+ *	port WDT_START, then read the port to start the watchdog. To pat
+ *	the dog, read port WDT_STOP to stop the timer, then read WDT_START
+ *	to restart it again.
+ */
+
+static int wdt_stop = 0x843;
+static int wdt_start = 0x443;
+
+static int timeout = WD_TIMO;  /* in seconds */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+		"Watchdog timeout in seconds. 1 <= timeout <= 255, default="
+				__MODULE_STRING(WD_TIMO) ".");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static void wafwdt_ping(void)
+{
+	/* pat watchdog */
+	spin_lock(&wafwdt_lock);
+	inb_p(wdt_stop);
+	inb_p(wdt_start);
+	spin_unlock(&wafwdt_lock);
+}
+
+static void wafwdt_start(void)
+{
+	/* start up watchdog */
+	outb_p(timeout, wdt_start);
+	inb_p(wdt_start);
+}
+
+static void wafwdt_stop(void)
+{
+	/* stop watchdog */
+	inb_p(wdt_stop);
+}
+
+static ssize_t wafwdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
+{
+	/* See if we got the magic character 'V' and reload the timer */
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			expect_close = 0;
+
+			/* scan to see whether or not we got the magic
+			   character */
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+		/* Well, anyhow someone wrote to us, we should
+		   return that favour */
+		wafwdt_ping();
+	}
+	return count;
+}
+
+static long wafwdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	int new_timeout;
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	static const struct watchdog_info ident = {
+		.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+							WDIOF_MAGICCLOSE,
+		.firmware_version = 1,
+		.identity = "Wafer 5823 WDT",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_SETOPTIONS:
+	{
+		int options, retval = -EINVAL;
+
+		if (get_user(options, p))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD) {
+			wafwdt_stop();
+			retval = 0;
+		}
+
+		if (options & WDIOS_ENABLECARD) {
+			wafwdt_start();
+			retval = 0;
+		}
+
+		return retval;
+	}
+
+	case WDIOC_KEEPALIVE:
+		wafwdt_ping();
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, p))
+			return -EFAULT;
+		if ((new_timeout < 1) || (new_timeout > 255))
+			return -EINVAL;
+		timeout = new_timeout;
+		wafwdt_stop();
+		wafwdt_start();
+		/* Fall through */
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, p);
+
+	default:
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+static int wafwdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &wafwdt_is_open))
+		return -EBUSY;
+
+	/*
+	 *      Activate
+	 */
+	wafwdt_start();
+	return nonseekable_open(inode, file);
+}
+
+static int wafwdt_close(struct inode *inode, struct file *file)
+{
+	if (expect_close == 42)
+		wafwdt_stop();
+	else {
+		pr_crit("WDT device closed unexpectedly.  WDT will not stop!\n");
+		wafwdt_ping();
+	}
+	clear_bit(0, &wafwdt_is_open);
+	expect_close = 0;
+	return 0;
+}
+
+/*
+ *	Notifier for system down
+ */
+
+static int wafwdt_notify_sys(struct notifier_block *this, unsigned long code,
+								void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		wafwdt_stop();
+	return NOTIFY_DONE;
+}
+
+/*
+ *	Kernel Interfaces
+ */
+
+static const struct file_operations wafwdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= wafwdt_write,
+	.unlocked_ioctl	= wafwdt_ioctl,
+	.open		= wafwdt_open,
+	.release	= wafwdt_close,
+};
+
+static struct miscdevice wafwdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &wafwdt_fops,
+};
+
+/*
+ *	The WDT needs to learn about soft shutdowns in order to
+ *	turn the timebomb registers off.
+ */
+
+static struct notifier_block wafwdt_notifier = {
+	.notifier_call = wafwdt_notify_sys,
+};
+
+static int __init wafwdt_init(void)
+{
+	int ret;
+
+	pr_info("WDT driver for Wafer 5823 single board computer initialising\n");
+
+	if (timeout < 1 || timeout > 255) {
+		timeout = WD_TIMO;
+		pr_info("timeout value must be 1 <= x <= 255, using %d\n",
+			timeout);
+	}
+
+	if (wdt_stop != wdt_start) {
+		if (!request_region(wdt_stop, 1, "Wafer 5823 WDT")) {
+			pr_err("I/O address 0x%04x already in use\n", wdt_stop);
+			ret = -EIO;
+			goto error;
+		}
+	}
+
+	if (!request_region(wdt_start, 1, "Wafer 5823 WDT")) {
+		pr_err("I/O address 0x%04x already in use\n", wdt_start);
+		ret = -EIO;
+		goto error2;
+	}
+
+	ret = register_reboot_notifier(&wafwdt_notifier);
+	if (ret != 0) {
+		pr_err("cannot register reboot notifier (err=%d)\n", ret);
+		goto error3;
+	}
+
+	ret = misc_register(&wafwdt_miscdev);
+	if (ret != 0) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, ret);
+		goto error4;
+	}
+
+	pr_info("initialized. timeout=%d sec (nowayout=%d)\n",
+		timeout, nowayout);
+
+	return ret;
+error4:
+	unregister_reboot_notifier(&wafwdt_notifier);
+error3:
+	release_region(wdt_start, 1);
+error2:
+	if (wdt_stop != wdt_start)
+		release_region(wdt_stop, 1);
+error:
+	return ret;
+}
+
+static void __exit wafwdt_exit(void)
+{
+	misc_deregister(&wafwdt_miscdev);
+	unregister_reboot_notifier(&wafwdt_notifier);
+	if (wdt_stop != wdt_start)
+		release_region(wdt_stop, 1);
+	release_region(wdt_start, 1);
+}
+
+module_init(wafwdt_init);
+module_exit(wafwdt_exit);
+
+MODULE_AUTHOR("Justin Cormack");
+MODULE_DESCRIPTION("ICP Wafer 5823 Single Board Computer WDT driver");
+MODULE_LICENSE("GPL");
+
+/* end of wafer5823wdt.c */
diff --git a/drivers/watchdog/watchdog_core.c b/drivers/watchdog/watchdog_core.c
new file mode 100644
index 000000000..5c600a370
--- /dev/null
+++ b/drivers/watchdog/watchdog_core.c
@@ -0,0 +1,414 @@
+/*
+ *	watchdog_core.c
+ *
+ *	(c) Copyright 2008-2011 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
+ *
+ *	(c) Copyright 2008-2011 Wim Van Sebroeck <wim@iguana.be>.
+ *
+ *	This source code is part of the generic code that can be used
+ *	by all the watchdog timer drivers.
+ *
+ *	Based on source code of the following authors:
+ *	  Matt Domsch <Matt_Domsch@dell.com>,
+ *	  Rob Radez <rob@osinvestor.com>,
+ *	  Rusty Lynch <rusty@linux.co.intel.com>
+ *	  Satyam Sharma <satyam@infradead.org>
+ *	  Randy Dunlap <randy.dunlap@oracle.com>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Alan Cox, CymruNet Ltd., Wim Van Sebroeck nor Iguana vzw.
+ *	admit liability nor provide warranty for any of this software.
+ *	This material is provided "AS-IS" and at no charge.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>	/* For EXPORT_SYMBOL/module stuff/... */
+#include <linux/types.h>	/* For standard types */
+#include <linux/errno.h>	/* For the -ENODEV/... values */
+#include <linux/kernel.h>	/* For printk/panic/... */
+#include <linux/reboot.h>	/* For restart handler */
+#include <linux/watchdog.h>	/* For watchdog specific items */
+#include <linux/init.h>		/* For __init/__exit/... */
+#include <linux/idr.h>		/* For ida_* macros */
+#include <linux/err.h>		/* For IS_ERR macros */
+#include <linux/of.h>		/* For of_get_timeout_sec */
+
+#include "watchdog_core.h"	/* For watchdog_dev_register/... */
+
+static DEFINE_IDA(watchdog_ida);
+
+/*
+ * Deferred Registration infrastructure.
+ *
+ * Sometimes watchdog drivers needs to be loaded as soon as possible,
+ * for example when it's impossible to disable it. To do so,
+ * raising the initcall level of the watchdog driver is a solution.
+ * But in such case, the miscdev is maybe not ready (subsys_initcall), and
+ * watchdog_core need miscdev to register the watchdog as a char device.
+ *
+ * The deferred registration infrastructure offer a way for the watchdog
+ * subsystem to register a watchdog properly, even before miscdev is ready.
+ */
+
+static DEFINE_MUTEX(wtd_deferred_reg_mutex);
+static LIST_HEAD(wtd_deferred_reg_list);
+static bool wtd_deferred_reg_done;
+
+static int watchdog_deferred_registration_add(struct watchdog_device *wdd)
+{
+	list_add_tail(&wdd->deferred,
+		      &wtd_deferred_reg_list);
+	return 0;
+}
+
+static void watchdog_deferred_registration_del(struct watchdog_device *wdd)
+{
+	struct list_head *p, *n;
+	struct watchdog_device *wdd_tmp;
+
+	list_for_each_safe(p, n, &wtd_deferred_reg_list) {
+		wdd_tmp = list_entry(p, struct watchdog_device,
+				     deferred);
+		if (wdd_tmp == wdd) {
+			list_del(&wdd_tmp->deferred);
+			break;
+		}
+	}
+}
+
+static void watchdog_check_min_max_timeout(struct watchdog_device *wdd)
+{
+	/*
+	 * Check that we have valid min and max timeout values, if
+	 * not reset them both to 0 (=not used or unknown)
+	 */
+	if (!wdd->max_hw_heartbeat_ms && wdd->min_timeout > wdd->max_timeout) {
+		pr_info("Invalid min and max timeout values, resetting to 0!\n");
+		wdd->min_timeout = 0;
+		wdd->max_timeout = 0;
+	}
+}
+
+/**
+ * watchdog_init_timeout() - initialize the timeout field
+ * @wdd: watchdog device
+ * @timeout_parm: timeout module parameter
+ * @dev: Device that stores the timeout-sec property
+ *
+ * Initialize the timeout field of the watchdog_device struct with either the
+ * timeout module parameter (if it is valid value) or the timeout-sec property
+ * (only if it is a valid value and the timeout_parm is out of bounds).
+ * If none of them are valid then we keep the old value (which should normally
+ * be the default timeout value).
+ *
+ * A zero is returned on success and -EINVAL for failure.
+ */
+int watchdog_init_timeout(struct watchdog_device *wdd,
+				unsigned int timeout_parm, struct device *dev)
+{
+	unsigned int t = 0;
+	int ret = 0;
+
+	watchdog_check_min_max_timeout(wdd);
+
+	/* try to get the timeout module parameter first */
+	if (!watchdog_timeout_invalid(wdd, timeout_parm) && timeout_parm) {
+		wdd->timeout = timeout_parm;
+		return ret;
+	}
+	if (timeout_parm)
+		ret = -EINVAL;
+
+	/* try to get the timeout_sec property */
+	if (dev == NULL || dev->of_node == NULL)
+		return ret;
+	of_property_read_u32(dev->of_node, "timeout-sec", &t);
+	if (!watchdog_timeout_invalid(wdd, t) && t)
+		wdd->timeout = t;
+	else
+		ret = -EINVAL;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(watchdog_init_timeout);
+
+static int watchdog_reboot_notifier(struct notifier_block *nb,
+				    unsigned long code, void *data)
+{
+	struct watchdog_device *wdd;
+
+	wdd = container_of(nb, struct watchdog_device, reboot_nb);
+	if (code == SYS_DOWN || code == SYS_HALT) {
+		if (watchdog_active(wdd)) {
+			int ret;
+
+			ret = wdd->ops->stop(wdd);
+			if (ret)
+				return NOTIFY_BAD;
+		}
+	}
+
+	return NOTIFY_DONE;
+}
+
+static int watchdog_restart_notifier(struct notifier_block *nb,
+				     unsigned long action, void *data)
+{
+	struct watchdog_device *wdd = container_of(nb, struct watchdog_device,
+						   restart_nb);
+
+	int ret;
+
+	ret = wdd->ops->restart(wdd, action, data);
+	if (ret)
+		return NOTIFY_BAD;
+
+	return NOTIFY_DONE;
+}
+
+/**
+ * watchdog_set_restart_priority - Change priority of restart handler
+ * @wdd: watchdog device
+ * @priority: priority of the restart handler, should follow these guidelines:
+ *   0:   use watchdog's restart function as last resort, has limited restart
+ *        capabilies
+ *   128: default restart handler, use if no other handler is expected to be
+ *        available and/or if restart is sufficient to restart the entire system
+ *   255: preempt all other handlers
+ *
+ * If a wdd->ops->restart function is provided when watchdog_register_device is
+ * called, it will be registered as a restart handler with the priority given
+ * here.
+ */
+void watchdog_set_restart_priority(struct watchdog_device *wdd, int priority)
+{
+	wdd->restart_nb.priority = priority;
+}
+EXPORT_SYMBOL_GPL(watchdog_set_restart_priority);
+
+static int __watchdog_register_device(struct watchdog_device *wdd)
+{
+	int ret, id = -1;
+
+	if (wdd == NULL || wdd->info == NULL || wdd->ops == NULL)
+		return -EINVAL;
+
+	/* Mandatory operations need to be supported */
+	if (!wdd->ops->start || (!wdd->ops->stop && !wdd->max_hw_heartbeat_ms))
+		return -EINVAL;
+
+	watchdog_check_min_max_timeout(wdd);
+
+	/*
+	 * Note: now that all watchdog_device data has been verified, we
+	 * will not check this anymore in other functions. If data gets
+	 * corrupted in a later stage then we expect a kernel panic!
+	 */
+
+	/* Use alias for watchdog id if possible */
+	if (wdd->parent) {
+		ret = of_alias_get_id(wdd->parent->of_node, "watchdog");
+		if (ret >= 0)
+			id = ida_simple_get(&watchdog_ida, ret,
+					    ret + 1, GFP_KERNEL);
+	}
+
+	if (id < 0)
+		id = ida_simple_get(&watchdog_ida, 0, MAX_DOGS, GFP_KERNEL);
+
+	if (id < 0)
+		return id;
+	wdd->id = id;
+
+	ret = watchdog_dev_register(wdd);
+	if (ret) {
+		ida_simple_remove(&watchdog_ida, id);
+		if (!(id == 0 && ret == -EBUSY))
+			return ret;
+
+		/* Retry in case a legacy watchdog module exists */
+		id = ida_simple_get(&watchdog_ida, 1, MAX_DOGS, GFP_KERNEL);
+		if (id < 0)
+			return id;
+		wdd->id = id;
+
+		ret = watchdog_dev_register(wdd);
+		if (ret) {
+			ida_simple_remove(&watchdog_ida, id);
+			return ret;
+		}
+	}
+
+	if (test_bit(WDOG_STOP_ON_REBOOT, &wdd->status)) {
+		if (!wdd->ops->stop)
+			pr_warn("watchdog%d: stop_on_reboot not supported\n", wdd->id);
+		else {
+			wdd->reboot_nb.notifier_call = watchdog_reboot_notifier;
+
+			ret = register_reboot_notifier(&wdd->reboot_nb);
+			if (ret) {
+				pr_err("watchdog%d: Cannot register reboot notifier (%d)\n",
+					wdd->id, ret);
+				watchdog_dev_unregister(wdd);
+				ida_simple_remove(&watchdog_ida, id);
+				return ret;
+			}
+		}
+	}
+
+	if (wdd->ops->restart) {
+		wdd->restart_nb.notifier_call = watchdog_restart_notifier;
+
+		ret = register_restart_handler(&wdd->restart_nb);
+		if (ret)
+			pr_warn("watchdog%d: Cannot register restart handler (%d)\n",
+				wdd->id, ret);
+	}
+
+	return 0;
+}
+
+/**
+ * watchdog_register_device() - register a watchdog device
+ * @wdd: watchdog device
+ *
+ * Register a watchdog device with the kernel so that the
+ * watchdog timer can be accessed from userspace.
+ *
+ * A zero is returned on success and a negative errno code for
+ * failure.
+ */
+
+int watchdog_register_device(struct watchdog_device *wdd)
+{
+	int ret;
+
+	mutex_lock(&wtd_deferred_reg_mutex);
+	if (wtd_deferred_reg_done)
+		ret = __watchdog_register_device(wdd);
+	else
+		ret = watchdog_deferred_registration_add(wdd);
+	mutex_unlock(&wtd_deferred_reg_mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(watchdog_register_device);
+
+static void __watchdog_unregister_device(struct watchdog_device *wdd)
+{
+	if (wdd == NULL)
+		return;
+
+	if (wdd->ops->restart)
+		unregister_restart_handler(&wdd->restart_nb);
+
+	if (test_bit(WDOG_STOP_ON_REBOOT, &wdd->status))
+		unregister_reboot_notifier(&wdd->reboot_nb);
+
+	watchdog_dev_unregister(wdd);
+	ida_simple_remove(&watchdog_ida, wdd->id);
+}
+
+/**
+ * watchdog_unregister_device() - unregister a watchdog device
+ * @wdd: watchdog device to unregister
+ *
+ * Unregister a watchdog device that was previously successfully
+ * registered with watchdog_register_device().
+ */
+
+void watchdog_unregister_device(struct watchdog_device *wdd)
+{
+	mutex_lock(&wtd_deferred_reg_mutex);
+	if (wtd_deferred_reg_done)
+		__watchdog_unregister_device(wdd);
+	else
+		watchdog_deferred_registration_del(wdd);
+	mutex_unlock(&wtd_deferred_reg_mutex);
+}
+
+EXPORT_SYMBOL_GPL(watchdog_unregister_device);
+
+static void devm_watchdog_unregister_device(struct device *dev, void *res)
+{
+	watchdog_unregister_device(*(struct watchdog_device **)res);
+}
+
+/**
+ * devm_watchdog_register_device() - resource managed watchdog_register_device()
+ * @dev: device that is registering this watchdog device
+ * @wdd: watchdog device
+ *
+ * Managed watchdog_register_device(). For watchdog device registered by this
+ * function,  watchdog_unregister_device() is automatically called on driver
+ * detach. See watchdog_register_device() for more information.
+ */
+int devm_watchdog_register_device(struct device *dev,
+				struct watchdog_device *wdd)
+{
+	struct watchdog_device **rcwdd;
+	int ret;
+
+	rcwdd = devres_alloc(devm_watchdog_unregister_device, sizeof(*rcwdd),
+			     GFP_KERNEL);
+	if (!rcwdd)
+		return -ENOMEM;
+
+	ret = watchdog_register_device(wdd);
+	if (!ret) {
+		*rcwdd = wdd;
+		devres_add(dev, rcwdd);
+	} else {
+		devres_free(rcwdd);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(devm_watchdog_register_device);
+
+static int __init watchdog_deferred_registration(void)
+{
+	mutex_lock(&wtd_deferred_reg_mutex);
+	wtd_deferred_reg_done = true;
+	while (!list_empty(&wtd_deferred_reg_list)) {
+		struct watchdog_device *wdd;
+
+		wdd = list_first_entry(&wtd_deferred_reg_list,
+				       struct watchdog_device, deferred);
+		list_del(&wdd->deferred);
+		__watchdog_register_device(wdd);
+	}
+	mutex_unlock(&wtd_deferred_reg_mutex);
+	return 0;
+}
+
+static int __init watchdog_init(void)
+{
+	int err;
+
+	err = watchdog_dev_init();
+	if (err < 0)
+		return err;
+
+	watchdog_deferred_registration();
+	return 0;
+}
+
+static void __exit watchdog_exit(void)
+{
+	watchdog_dev_exit();
+	ida_destroy(&watchdog_ida);
+}
+
+subsys_initcall_sync(watchdog_init);
+module_exit(watchdog_exit);
+
+MODULE_AUTHOR("Alan Cox <alan@lxorguk.ukuu.org.uk>");
+MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>");
+MODULE_DESCRIPTION("WatchDog Timer Driver Core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/watchdog_core.h b/drivers/watchdog/watchdog_core.h
new file mode 100644
index 000000000..86ff962d1
--- /dev/null
+++ b/drivers/watchdog/watchdog_core.h
@@ -0,0 +1,37 @@
+/*
+ *	watchdog_core.h
+ *
+ *	(c) Copyright 2008-2011 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
+ *
+ *	(c) Copyright 2008-2011 Wim Van Sebroeck <wim@iguana.be>.
+ *
+ *	This source code is part of the generic code that can be used
+ *	by all the watchdog timer drivers.
+ *
+ *	Based on source code of the following authors:
+ *	  Matt Domsch <Matt_Domsch@dell.com>,
+ *	  Rob Radez <rob@osinvestor.com>,
+ *	  Rusty Lynch <rusty@linux.co.intel.com>
+ *	  Satyam Sharma <satyam@infradead.org>
+ *	  Randy Dunlap <randy.dunlap@oracle.com>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Alan Cox, CymruNet Ltd., Wim Van Sebroeck nor Iguana vzw.
+ *	admit liability nor provide warranty for any of this software.
+ *	This material is provided "AS-IS" and at no charge.
+ */
+
+#define MAX_DOGS	32	/* Maximum number of watchdog devices */
+
+/*
+ *	Functions/procedures to be called by the core
+ */
+extern int watchdog_dev_register(struct watchdog_device *);
+extern void watchdog_dev_unregister(struct watchdog_device *);
+extern int __init watchdog_dev_init(void);
+extern void __exit watchdog_dev_exit(void);
diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
new file mode 100644
index 000000000..8fe59b7d8
--- /dev/null
+++ b/drivers/watchdog/watchdog_dev.c
@@ -0,0 +1,1146 @@
+/*
+ *	watchdog_dev.c
+ *
+ *	(c) Copyright 2008-2011 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
+ *
+ *	(c) Copyright 2008-2011 Wim Van Sebroeck <wim@iguana.be>.
+ *
+ *
+ *	This source code is part of the generic code that can be used
+ *	by all the watchdog timer drivers.
+ *
+ *	This part of the generic code takes care of the following
+ *	misc device: /dev/watchdog.
+ *
+ *	Based on source code of the following authors:
+ *	  Matt Domsch <Matt_Domsch@dell.com>,
+ *	  Rob Radez <rob@osinvestor.com>,
+ *	  Rusty Lynch <rusty@linux.co.intel.com>
+ *	  Satyam Sharma <satyam@infradead.org>
+ *	  Randy Dunlap <randy.dunlap@oracle.com>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Alan Cox, CymruNet Ltd., Wim Van Sebroeck nor Iguana vzw.
+ *	admit liability nor provide warranty for any of this software.
+ *	This material is provided "AS-IS" and at no charge.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cdev.h>		/* For character device */
+#include <linux/errno.h>	/* For the -ENODEV/... values */
+#include <linux/fs.h>		/* For file operations */
+#include <linux/init.h>		/* For __init/__exit/... */
+#include <linux/hrtimer.h>	/* For hrtimers */
+#include <linux/kernel.h>	/* For printk/panic/... */
+#include <linux/kthread.h>	/* For kthread_work */
+#include <linux/miscdevice.h>	/* For handling misc devices */
+#include <linux/module.h>	/* For module stuff/... */
+#include <linux/mutex.h>	/* For mutexes */
+#include <linux/slab.h>		/* For memory functions */
+#include <linux/types.h>	/* For standard types (like size_t) */
+#include <linux/watchdog.h>	/* For watchdog specific items */
+#include <linux/uaccess.h>	/* For copy_to_user/put_user/... */
+
+#include <uapi/linux/sched/types.h>	/* For struct sched_param */
+
+#include "watchdog_core.h"
+#include "watchdog_pretimeout.h"
+
+/*
+ * struct watchdog_core_data - watchdog core internal data
+ * @dev:	The watchdog's internal device
+ * @cdev:	The watchdog's Character device.
+ * @wdd:	Pointer to watchdog device.
+ * @lock:	Lock for watchdog core.
+ * @status:	Watchdog core internal status bits.
+ */
+struct watchdog_core_data {
+	struct device dev;
+	struct cdev cdev;
+	struct watchdog_device *wdd;
+	struct mutex lock;
+	ktime_t last_keepalive;
+	ktime_t last_hw_keepalive;
+	struct hrtimer timer;
+	struct kthread_work work;
+	unsigned long status;		/* Internal status bits */
+#define _WDOG_DEV_OPEN		0	/* Opened ? */
+#define _WDOG_ALLOW_RELEASE	1	/* Did we receive the magic char ? */
+#define _WDOG_KEEPALIVE		2	/* Did we receive a keepalive ? */
+};
+
+/* the dev_t structure to store the dynamically allocated watchdog devices */
+static dev_t watchdog_devt;
+/* Reference to watchdog device behind /dev/watchdog */
+static struct watchdog_core_data *old_wd_data;
+
+static struct kthread_worker *watchdog_kworker;
+
+static bool handle_boot_enabled =
+	IS_ENABLED(CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED);
+
+static inline bool watchdog_need_worker(struct watchdog_device *wdd)
+{
+	/* All variables in milli-seconds */
+	unsigned int hm = wdd->max_hw_heartbeat_ms;
+	unsigned int t = wdd->timeout * 1000;
+
+	/*
+	 * A worker to generate heartbeat requests is needed if all of the
+	 * following conditions are true.
+	 * - Userspace activated the watchdog.
+	 * - The driver provided a value for the maximum hardware timeout, and
+	 *   thus is aware that the framework supports generating heartbeat
+	 *   requests.
+	 * - Userspace requests a longer timeout than the hardware can handle.
+	 *
+	 * Alternatively, if userspace has not opened the watchdog
+	 * device, we take care of feeding the watchdog if it is
+	 * running.
+	 */
+	return (hm && watchdog_active(wdd) && t > hm) ||
+		(t && !watchdog_active(wdd) && watchdog_hw_running(wdd));
+}
+
+static ktime_t watchdog_next_keepalive(struct watchdog_device *wdd)
+{
+	struct watchdog_core_data *wd_data = wdd->wd_data;
+	unsigned int timeout_ms = wdd->timeout * 1000;
+	ktime_t keepalive_interval;
+	ktime_t last_heartbeat, latest_heartbeat;
+	ktime_t virt_timeout;
+	unsigned int hw_heartbeat_ms;
+
+	virt_timeout = ktime_add(wd_data->last_keepalive,
+				 ms_to_ktime(timeout_ms));
+	hw_heartbeat_ms = min_not_zero(timeout_ms, wdd->max_hw_heartbeat_ms);
+	keepalive_interval = ms_to_ktime(hw_heartbeat_ms / 2);
+
+	if (!watchdog_active(wdd))
+		return keepalive_interval;
+
+	/*
+	 * To ensure that the watchdog times out wdd->timeout seconds
+	 * after the most recent ping from userspace, the last
+	 * worker ping has to come in hw_heartbeat_ms before this timeout.
+	 */
+	last_heartbeat = ktime_sub(virt_timeout, ms_to_ktime(hw_heartbeat_ms));
+	latest_heartbeat = ktime_sub(last_heartbeat, ktime_get());
+	if (ktime_before(latest_heartbeat, keepalive_interval))
+		return latest_heartbeat;
+	return keepalive_interval;
+}
+
+static inline void watchdog_update_worker(struct watchdog_device *wdd)
+{
+	struct watchdog_core_data *wd_data = wdd->wd_data;
+
+	if (watchdog_need_worker(wdd)) {
+		ktime_t t = watchdog_next_keepalive(wdd);
+
+		if (t > 0)
+			hrtimer_start(&wd_data->timer, t, HRTIMER_MODE_REL);
+	} else {
+		hrtimer_cancel(&wd_data->timer);
+	}
+}
+
+static int __watchdog_ping(struct watchdog_device *wdd)
+{
+	struct watchdog_core_data *wd_data = wdd->wd_data;
+	ktime_t earliest_keepalive, now;
+	int err;
+
+	earliest_keepalive = ktime_add(wd_data->last_hw_keepalive,
+				       ms_to_ktime(wdd->min_hw_heartbeat_ms));
+	now = ktime_get();
+
+	if (ktime_after(earliest_keepalive, now)) {
+		hrtimer_start(&wd_data->timer,
+			      ktime_sub(earliest_keepalive, now),
+			      HRTIMER_MODE_REL);
+		return 0;
+	}
+
+	wd_data->last_hw_keepalive = now;
+
+	if (wdd->ops->ping)
+		err = wdd->ops->ping(wdd);  /* ping the watchdog */
+	else
+		err = wdd->ops->start(wdd); /* restart watchdog */
+
+	watchdog_update_worker(wdd);
+
+	return err;
+}
+
+/*
+ *	watchdog_ping: ping the watchdog.
+ *	@wdd: the watchdog device to ping
+ *
+ *	The caller must hold wd_data->lock.
+ *
+ *	If the watchdog has no own ping operation then it needs to be
+ *	restarted via the start operation. This wrapper function does
+ *	exactly that.
+ *	We only ping when the watchdog device is running.
+ */
+
+static int watchdog_ping(struct watchdog_device *wdd)
+{
+	struct watchdog_core_data *wd_data = wdd->wd_data;
+
+	if (!watchdog_active(wdd) && !watchdog_hw_running(wdd))
+		return 0;
+
+	set_bit(_WDOG_KEEPALIVE, &wd_data->status);
+
+	wd_data->last_keepalive = ktime_get();
+	return __watchdog_ping(wdd);
+}
+
+static bool watchdog_worker_should_ping(struct watchdog_core_data *wd_data)
+{
+	struct watchdog_device *wdd = wd_data->wdd;
+
+	return wdd && (watchdog_active(wdd) || watchdog_hw_running(wdd));
+}
+
+static void watchdog_ping_work(struct kthread_work *work)
+{
+	struct watchdog_core_data *wd_data;
+
+	wd_data = container_of(work, struct watchdog_core_data, work);
+
+	mutex_lock(&wd_data->lock);
+	if (watchdog_worker_should_ping(wd_data))
+		__watchdog_ping(wd_data->wdd);
+	mutex_unlock(&wd_data->lock);
+}
+
+static enum hrtimer_restart watchdog_timer_expired(struct hrtimer *timer)
+{
+	struct watchdog_core_data *wd_data;
+
+	wd_data = container_of(timer, struct watchdog_core_data, timer);
+
+	kthread_queue_work(watchdog_kworker, &wd_data->work);
+	return HRTIMER_NORESTART;
+}
+
+/*
+ *	watchdog_start: wrapper to start the watchdog.
+ *	@wdd: the watchdog device to start
+ *
+ *	The caller must hold wd_data->lock.
+ *
+ *	Start the watchdog if it is not active and mark it active.
+ *	This function returns zero on success or a negative errno code for
+ *	failure.
+ */
+
+static int watchdog_start(struct watchdog_device *wdd)
+{
+	struct watchdog_core_data *wd_data = wdd->wd_data;
+	ktime_t started_at;
+	int err;
+
+	if (watchdog_active(wdd))
+		return 0;
+
+	set_bit(_WDOG_KEEPALIVE, &wd_data->status);
+
+	started_at = ktime_get();
+	if (watchdog_hw_running(wdd) && wdd->ops->ping)
+		err = wdd->ops->ping(wdd);
+	else
+		err = wdd->ops->start(wdd);
+	if (err == 0) {
+		set_bit(WDOG_ACTIVE, &wdd->status);
+		wd_data->last_keepalive = started_at;
+		wd_data->last_hw_keepalive = started_at;
+		watchdog_update_worker(wdd);
+	}
+
+	return err;
+}
+
+/*
+ *	watchdog_stop: wrapper to stop the watchdog.
+ *	@wdd: the watchdog device to stop
+ *
+ *	The caller must hold wd_data->lock.
+ *
+ *	Stop the watchdog if it is still active and unmark it active.
+ *	This function returns zero on success or a negative errno code for
+ *	failure.
+ *	If the 'nowayout' feature was set, the watchdog cannot be stopped.
+ */
+
+static int watchdog_stop(struct watchdog_device *wdd)
+{
+	int err = 0;
+
+	if (!watchdog_active(wdd))
+		return 0;
+
+	if (test_bit(WDOG_NO_WAY_OUT, &wdd->status)) {
+		pr_info("watchdog%d: nowayout prevents watchdog being stopped!\n",
+			wdd->id);
+		return -EBUSY;
+	}
+
+	if (wdd->ops->stop) {
+		clear_bit(WDOG_HW_RUNNING, &wdd->status);
+		err = wdd->ops->stop(wdd);
+	} else {
+		set_bit(WDOG_HW_RUNNING, &wdd->status);
+	}
+
+	if (err == 0) {
+		clear_bit(WDOG_ACTIVE, &wdd->status);
+		watchdog_update_worker(wdd);
+	}
+
+	return err;
+}
+
+/*
+ *	watchdog_get_status: wrapper to get the watchdog status
+ *	@wdd: the watchdog device to get the status from
+ *
+ *	The caller must hold wd_data->lock.
+ *
+ *	Get the watchdog's status flags.
+ */
+
+static unsigned int watchdog_get_status(struct watchdog_device *wdd)
+{
+	struct watchdog_core_data *wd_data = wdd->wd_data;
+	unsigned int status;
+
+	if (wdd->ops->status)
+		status = wdd->ops->status(wdd);
+	else
+		status = wdd->bootstatus & (WDIOF_CARDRESET |
+					    WDIOF_OVERHEAT |
+					    WDIOF_FANFAULT |
+					    WDIOF_EXTERN1 |
+					    WDIOF_EXTERN2 |
+					    WDIOF_POWERUNDER |
+					    WDIOF_POWEROVER);
+
+	if (test_bit(_WDOG_ALLOW_RELEASE, &wd_data->status))
+		status |= WDIOF_MAGICCLOSE;
+
+	if (test_and_clear_bit(_WDOG_KEEPALIVE, &wd_data->status))
+		status |= WDIOF_KEEPALIVEPING;
+
+	return status;
+}
+
+/*
+ *	watchdog_set_timeout: set the watchdog timer timeout
+ *	@wdd: the watchdog device to set the timeout for
+ *	@timeout: timeout to set in seconds
+ *
+ *	The caller must hold wd_data->lock.
+ */
+
+static int watchdog_set_timeout(struct watchdog_device *wdd,
+							unsigned int timeout)
+{
+	int err = 0;
+
+	if (!(wdd->info->options & WDIOF_SETTIMEOUT))
+		return -EOPNOTSUPP;
+
+	if (watchdog_timeout_invalid(wdd, timeout))
+		return -EINVAL;
+
+	if (wdd->ops->set_timeout) {
+		err = wdd->ops->set_timeout(wdd, timeout);
+	} else {
+		wdd->timeout = timeout;
+		/* Disable pretimeout if it doesn't fit the new timeout */
+		if (wdd->pretimeout >= wdd->timeout)
+			wdd->pretimeout = 0;
+	}
+
+	watchdog_update_worker(wdd);
+
+	return err;
+}
+
+/*
+ *	watchdog_set_pretimeout: set the watchdog timer pretimeout
+ *	@wdd: the watchdog device to set the timeout for
+ *	@timeout: pretimeout to set in seconds
+ */
+
+static int watchdog_set_pretimeout(struct watchdog_device *wdd,
+				   unsigned int timeout)
+{
+	int err = 0;
+
+	if (!(wdd->info->options & WDIOF_PRETIMEOUT))
+		return -EOPNOTSUPP;
+
+	if (watchdog_pretimeout_invalid(wdd, timeout))
+		return -EINVAL;
+
+	if (wdd->ops->set_pretimeout)
+		err = wdd->ops->set_pretimeout(wdd, timeout);
+	else
+		wdd->pretimeout = timeout;
+
+	return err;
+}
+
+/*
+ *	watchdog_get_timeleft: wrapper to get the time left before a reboot
+ *	@wdd: the watchdog device to get the remaining time from
+ *	@timeleft: the time that's left
+ *
+ *	The caller must hold wd_data->lock.
+ *
+ *	Get the time before a watchdog will reboot (if not pinged).
+ */
+
+static int watchdog_get_timeleft(struct watchdog_device *wdd,
+							unsigned int *timeleft)
+{
+	*timeleft = 0;
+
+	if (!wdd->ops->get_timeleft)
+		return -EOPNOTSUPP;
+
+	*timeleft = wdd->ops->get_timeleft(wdd);
+
+	return 0;
+}
+
+#ifdef CONFIG_WATCHDOG_SYSFS
+static ssize_t nowayout_show(struct device *dev, struct device_attribute *attr,
+				char *buf)
+{
+	struct watchdog_device *wdd = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", !!test_bit(WDOG_NO_WAY_OUT, &wdd->status));
+}
+static DEVICE_ATTR_RO(nowayout);
+
+static ssize_t status_show(struct device *dev, struct device_attribute *attr,
+				char *buf)
+{
+	struct watchdog_device *wdd = dev_get_drvdata(dev);
+	struct watchdog_core_data *wd_data = wdd->wd_data;
+	unsigned int status;
+
+	mutex_lock(&wd_data->lock);
+	status = watchdog_get_status(wdd);
+	mutex_unlock(&wd_data->lock);
+
+	return sprintf(buf, "0x%x\n", status);
+}
+static DEVICE_ATTR_RO(status);
+
+static ssize_t bootstatus_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct watchdog_device *wdd = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", wdd->bootstatus);
+}
+static DEVICE_ATTR_RO(bootstatus);
+
+static ssize_t timeleft_show(struct device *dev, struct device_attribute *attr,
+				char *buf)
+{
+	struct watchdog_device *wdd = dev_get_drvdata(dev);
+	struct watchdog_core_data *wd_data = wdd->wd_data;
+	ssize_t status;
+	unsigned int val;
+
+	mutex_lock(&wd_data->lock);
+	status = watchdog_get_timeleft(wdd, &val);
+	mutex_unlock(&wd_data->lock);
+	if (!status)
+		status = sprintf(buf, "%u\n", val);
+
+	return status;
+}
+static DEVICE_ATTR_RO(timeleft);
+
+static ssize_t timeout_show(struct device *dev, struct device_attribute *attr,
+				char *buf)
+{
+	struct watchdog_device *wdd = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", wdd->timeout);
+}
+static DEVICE_ATTR_RO(timeout);
+
+static ssize_t pretimeout_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct watchdog_device *wdd = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", wdd->pretimeout);
+}
+static DEVICE_ATTR_RO(pretimeout);
+
+static ssize_t identity_show(struct device *dev, struct device_attribute *attr,
+				char *buf)
+{
+	struct watchdog_device *wdd = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", wdd->info->identity);
+}
+static DEVICE_ATTR_RO(identity);
+
+static ssize_t state_show(struct device *dev, struct device_attribute *attr,
+				char *buf)
+{
+	struct watchdog_device *wdd = dev_get_drvdata(dev);
+
+	if (watchdog_active(wdd))
+		return sprintf(buf, "active\n");
+
+	return sprintf(buf, "inactive\n");
+}
+static DEVICE_ATTR_RO(state);
+
+static ssize_t pretimeout_available_governors_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	return watchdog_pretimeout_available_governors_get(buf);
+}
+static DEVICE_ATTR_RO(pretimeout_available_governors);
+
+static ssize_t pretimeout_governor_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct watchdog_device *wdd = dev_get_drvdata(dev);
+
+	return watchdog_pretimeout_governor_get(wdd, buf);
+}
+
+static ssize_t pretimeout_governor_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	struct watchdog_device *wdd = dev_get_drvdata(dev);
+	int ret = watchdog_pretimeout_governor_set(wdd, buf);
+
+	if (!ret)
+		ret = count;
+
+	return ret;
+}
+static DEVICE_ATTR_RW(pretimeout_governor);
+
+static umode_t wdt_is_visible(struct kobject *kobj, struct attribute *attr,
+				int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct watchdog_device *wdd = dev_get_drvdata(dev);
+	umode_t mode = attr->mode;
+
+	if (attr == &dev_attr_timeleft.attr && !wdd->ops->get_timeleft)
+		mode = 0;
+	else if (attr == &dev_attr_pretimeout.attr &&
+		 !(wdd->info->options & WDIOF_PRETIMEOUT))
+		mode = 0;
+	else if ((attr == &dev_attr_pretimeout_governor.attr ||
+		  attr == &dev_attr_pretimeout_available_governors.attr) &&
+		 (!(wdd->info->options & WDIOF_PRETIMEOUT) ||
+		  !IS_ENABLED(CONFIG_WATCHDOG_PRETIMEOUT_GOV)))
+		mode = 0;
+
+	return mode;
+}
+static struct attribute *wdt_attrs[] = {
+	&dev_attr_state.attr,
+	&dev_attr_identity.attr,
+	&dev_attr_timeout.attr,
+	&dev_attr_pretimeout.attr,
+	&dev_attr_timeleft.attr,
+	&dev_attr_bootstatus.attr,
+	&dev_attr_status.attr,
+	&dev_attr_nowayout.attr,
+	&dev_attr_pretimeout_governor.attr,
+	&dev_attr_pretimeout_available_governors.attr,
+	NULL,
+};
+
+static const struct attribute_group wdt_group = {
+	.attrs = wdt_attrs,
+	.is_visible = wdt_is_visible,
+};
+__ATTRIBUTE_GROUPS(wdt);
+#else
+#define wdt_groups	NULL
+#endif
+
+/*
+ *	watchdog_ioctl_op: call the watchdog drivers ioctl op if defined
+ *	@wdd: the watchdog device to do the ioctl on
+ *	@cmd: watchdog command
+ *	@arg: argument pointer
+ *
+ *	The caller must hold wd_data->lock.
+ */
+
+static int watchdog_ioctl_op(struct watchdog_device *wdd, unsigned int cmd,
+							unsigned long arg)
+{
+	if (!wdd->ops->ioctl)
+		return -ENOIOCTLCMD;
+
+	return wdd->ops->ioctl(wdd, cmd, arg);
+}
+
+/*
+ *	watchdog_write: writes to the watchdog.
+ *	@file: file from VFS
+ *	@data: user address of data
+ *	@len: length of data
+ *	@ppos: pointer to the file offset
+ *
+ *	A write to a watchdog device is defined as a keepalive ping.
+ *	Writing the magic 'V' sequence allows the next close to turn
+ *	off the watchdog (if 'nowayout' is not set).
+ */
+
+static ssize_t watchdog_write(struct file *file, const char __user *data,
+						size_t len, loff_t *ppos)
+{
+	struct watchdog_core_data *wd_data = file->private_data;
+	struct watchdog_device *wdd;
+	int err;
+	size_t i;
+	char c;
+
+	if (len == 0)
+		return 0;
+
+	/*
+	 * Note: just in case someone wrote the magic character
+	 * five months ago...
+	 */
+	clear_bit(_WDOG_ALLOW_RELEASE, &wd_data->status);
+
+	/* scan to see whether or not we got the magic character */
+	for (i = 0; i != len; i++) {
+		if (get_user(c, data + i))
+			return -EFAULT;
+		if (c == 'V')
+			set_bit(_WDOG_ALLOW_RELEASE, &wd_data->status);
+	}
+
+	/* someone wrote to us, so we send the watchdog a keepalive ping */
+
+	err = -ENODEV;
+	mutex_lock(&wd_data->lock);
+	wdd = wd_data->wdd;
+	if (wdd)
+		err = watchdog_ping(wdd);
+	mutex_unlock(&wd_data->lock);
+
+	if (err < 0)
+		return err;
+
+	return len;
+}
+
+/*
+ *	watchdog_ioctl: handle the different ioctl's for the watchdog device.
+ *	@file: file handle to the device
+ *	@cmd: watchdog command
+ *	@arg: argument pointer
+ *
+ *	The watchdog API defines a common set of functions for all watchdogs
+ *	according to their available features.
+ */
+
+static long watchdog_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	struct watchdog_core_data *wd_data = file->private_data;
+	void __user *argp = (void __user *)arg;
+	struct watchdog_device *wdd;
+	int __user *p = argp;
+	unsigned int val;
+	int err;
+
+	mutex_lock(&wd_data->lock);
+
+	wdd = wd_data->wdd;
+	if (!wdd) {
+		err = -ENODEV;
+		goto out_ioctl;
+	}
+
+	err = watchdog_ioctl_op(wdd, cmd, arg);
+	if (err != -ENOIOCTLCMD)
+		goto out_ioctl;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		err = copy_to_user(argp, wdd->info,
+			sizeof(struct watchdog_info)) ? -EFAULT : 0;
+		break;
+	case WDIOC_GETSTATUS:
+		val = watchdog_get_status(wdd);
+		err = put_user(val, p);
+		break;
+	case WDIOC_GETBOOTSTATUS:
+		err = put_user(wdd->bootstatus, p);
+		break;
+	case WDIOC_SETOPTIONS:
+		if (get_user(val, p)) {
+			err = -EFAULT;
+			break;
+		}
+		if (val & WDIOS_DISABLECARD) {
+			err = watchdog_stop(wdd);
+			if (err < 0)
+				break;
+		}
+		if (val & WDIOS_ENABLECARD)
+			err = watchdog_start(wdd);
+		break;
+	case WDIOC_KEEPALIVE:
+		if (!(wdd->info->options & WDIOF_KEEPALIVEPING)) {
+			err = -EOPNOTSUPP;
+			break;
+		}
+		err = watchdog_ping(wdd);
+		break;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(val, p)) {
+			err = -EFAULT;
+			break;
+		}
+		err = watchdog_set_timeout(wdd, val);
+		if (err < 0)
+			break;
+		/* If the watchdog is active then we send a keepalive ping
+		 * to make sure that the watchdog keep's running (and if
+		 * possible that it takes the new timeout) */
+		err = watchdog_ping(wdd);
+		if (err < 0)
+			break;
+		/* fall through */
+	case WDIOC_GETTIMEOUT:
+		/* timeout == 0 means that we don't know the timeout */
+		if (wdd->timeout == 0) {
+			err = -EOPNOTSUPP;
+			break;
+		}
+		err = put_user(wdd->timeout, p);
+		break;
+	case WDIOC_GETTIMELEFT:
+		err = watchdog_get_timeleft(wdd, &val);
+		if (err < 0)
+			break;
+		err = put_user(val, p);
+		break;
+	case WDIOC_SETPRETIMEOUT:
+		if (get_user(val, p)) {
+			err = -EFAULT;
+			break;
+		}
+		err = watchdog_set_pretimeout(wdd, val);
+		break;
+	case WDIOC_GETPRETIMEOUT:
+		err = put_user(wdd->pretimeout, p);
+		break;
+	default:
+		err = -ENOTTY;
+		break;
+	}
+
+out_ioctl:
+	mutex_unlock(&wd_data->lock);
+	return err;
+}
+
+/*
+ *	watchdog_open: open the /dev/watchdog* devices.
+ *	@inode: inode of device
+ *	@file: file handle to device
+ *
+ *	When the /dev/watchdog* device gets opened, we start the watchdog.
+ *	Watch out: the /dev/watchdog device is single open, so we make sure
+ *	it can only be opened once.
+ */
+
+static int watchdog_open(struct inode *inode, struct file *file)
+{
+	struct watchdog_core_data *wd_data;
+	struct watchdog_device *wdd;
+	bool hw_running;
+	int err;
+
+	/* Get the corresponding watchdog device */
+	if (imajor(inode) == MISC_MAJOR)
+		wd_data = old_wd_data;
+	else
+		wd_data = container_of(inode->i_cdev, struct watchdog_core_data,
+				       cdev);
+
+	/* the watchdog is single open! */
+	if (test_and_set_bit(_WDOG_DEV_OPEN, &wd_data->status))
+		return -EBUSY;
+
+	wdd = wd_data->wdd;
+
+	/*
+	 * If the /dev/watchdog device is open, we don't want the module
+	 * to be unloaded.
+	 */
+	hw_running = watchdog_hw_running(wdd);
+	if (!hw_running && !try_module_get(wdd->ops->owner)) {
+		err = -EBUSY;
+		goto out_clear;
+	}
+
+	err = watchdog_start(wdd);
+	if (err < 0)
+		goto out_mod;
+
+	file->private_data = wd_data;
+
+	if (!hw_running)
+		get_device(&wd_data->dev);
+
+	/* dev/watchdog is a virtual (and thus non-seekable) filesystem */
+	return nonseekable_open(inode, file);
+
+out_mod:
+	module_put(wd_data->wdd->ops->owner);
+out_clear:
+	clear_bit(_WDOG_DEV_OPEN, &wd_data->status);
+	return err;
+}
+
+static void watchdog_core_data_release(struct device *dev)
+{
+	struct watchdog_core_data *wd_data;
+
+	wd_data = container_of(dev, struct watchdog_core_data, dev);
+
+	kfree(wd_data);
+}
+
+/*
+ *	watchdog_release: release the watchdog device.
+ *	@inode: inode of device
+ *	@file: file handle to device
+ *
+ *	This is the code for when /dev/watchdog gets closed. We will only
+ *	stop the watchdog when we have received the magic char (and nowayout
+ *	was not set), else the watchdog will keep running.
+ */
+
+static int watchdog_release(struct inode *inode, struct file *file)
+{
+	struct watchdog_core_data *wd_data = file->private_data;
+	struct watchdog_device *wdd;
+	int err = -EBUSY;
+	bool running;
+
+	mutex_lock(&wd_data->lock);
+
+	wdd = wd_data->wdd;
+	if (!wdd)
+		goto done;
+
+	/*
+	 * We only stop the watchdog if we received the magic character
+	 * or if WDIOF_MAGICCLOSE is not set. If nowayout was set then
+	 * watchdog_stop will fail.
+	 */
+	if (!test_bit(WDOG_ACTIVE, &wdd->status))
+		err = 0;
+	else if (test_and_clear_bit(_WDOG_ALLOW_RELEASE, &wd_data->status) ||
+		 !(wdd->info->options & WDIOF_MAGICCLOSE))
+		err = watchdog_stop(wdd);
+
+	/* If the watchdog was not stopped, send a keepalive ping */
+	if (err < 0) {
+		pr_crit("watchdog%d: watchdog did not stop!\n", wdd->id);
+		watchdog_ping(wdd);
+	}
+
+	watchdog_update_worker(wdd);
+
+	/* make sure that /dev/watchdog can be re-opened */
+	clear_bit(_WDOG_DEV_OPEN, &wd_data->status);
+
+done:
+	running = wdd && watchdog_hw_running(wdd);
+	mutex_unlock(&wd_data->lock);
+	/*
+	 * Allow the owner module to be unloaded again unless the watchdog
+	 * is still running. If the watchdog is still running, it can not
+	 * be stopped, and its driver must not be unloaded.
+	 */
+	if (!running) {
+		module_put(wd_data->cdev.owner);
+		put_device(&wd_data->dev);
+	}
+	return 0;
+}
+
+static const struct file_operations watchdog_fops = {
+	.owner		= THIS_MODULE,
+	.write		= watchdog_write,
+	.unlocked_ioctl	= watchdog_ioctl,
+	.open		= watchdog_open,
+	.release	= watchdog_release,
+};
+
+static struct miscdevice watchdog_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &watchdog_fops,
+};
+
+static struct class watchdog_class = {
+	.name =		"watchdog",
+	.owner =	THIS_MODULE,
+	.dev_groups =	wdt_groups,
+};
+
+/*
+ *	watchdog_cdev_register: register watchdog character device
+ *	@wdd: watchdog device
+ *
+ *	Register a watchdog character device including handling the legacy
+ *	/dev/watchdog node. /dev/watchdog is actually a miscdevice and
+ *	thus we set it up like that.
+ */
+
+static int watchdog_cdev_register(struct watchdog_device *wdd)
+{
+	struct watchdog_core_data *wd_data;
+	int err;
+
+	wd_data = kzalloc(sizeof(struct watchdog_core_data), GFP_KERNEL);
+	if (!wd_data)
+		return -ENOMEM;
+	mutex_init(&wd_data->lock);
+
+	wd_data->wdd = wdd;
+	wdd->wd_data = wd_data;
+
+	if (IS_ERR_OR_NULL(watchdog_kworker)) {
+		kfree(wd_data);
+		return -ENODEV;
+	}
+
+	device_initialize(&wd_data->dev);
+	wd_data->dev.devt = MKDEV(MAJOR(watchdog_devt), wdd->id);
+	wd_data->dev.class = &watchdog_class;
+	wd_data->dev.parent = wdd->parent;
+	wd_data->dev.groups = wdd->groups;
+	wd_data->dev.release = watchdog_core_data_release;
+	dev_set_drvdata(&wd_data->dev, wdd);
+	dev_set_name(&wd_data->dev, "watchdog%d", wdd->id);
+
+	kthread_init_work(&wd_data->work, watchdog_ping_work);
+	hrtimer_init(&wd_data->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	wd_data->timer.function = watchdog_timer_expired;
+
+	if (wdd->id == 0) {
+		old_wd_data = wd_data;
+		watchdog_miscdev.parent = wdd->parent;
+		err = misc_register(&watchdog_miscdev);
+		if (err != 0) {
+			pr_err("%s: cannot register miscdev on minor=%d (err=%d).\n",
+				wdd->info->identity, WATCHDOG_MINOR, err);
+			if (err == -EBUSY)
+				pr_err("%s: a legacy watchdog module is probably present.\n",
+					wdd->info->identity);
+			old_wd_data = NULL;
+			put_device(&wd_data->dev);
+			return err;
+		}
+	}
+
+	/* Fill in the data structures */
+	cdev_init(&wd_data->cdev, &watchdog_fops);
+
+	/* Add the device */
+	err = cdev_device_add(&wd_data->cdev, &wd_data->dev);
+	if (err) {
+		pr_err("watchdog%d unable to add device %d:%d\n",
+			wdd->id,  MAJOR(watchdog_devt), wdd->id);
+		if (wdd->id == 0) {
+			misc_deregister(&watchdog_miscdev);
+			old_wd_data = NULL;
+			put_device(&wd_data->dev);
+		}
+		return err;
+	}
+
+	wd_data->cdev.owner = wdd->ops->owner;
+
+	/* Record time of most recent heartbeat as 'just before now'. */
+	wd_data->last_hw_keepalive = ktime_sub(ktime_get(), 1);
+
+	/*
+	 * If the watchdog is running, prevent its driver from being unloaded,
+	 * and schedule an immediate ping.
+	 */
+	if (watchdog_hw_running(wdd)) {
+		__module_get(wdd->ops->owner);
+		get_device(&wd_data->dev);
+		if (handle_boot_enabled)
+			hrtimer_start(&wd_data->timer, 0, HRTIMER_MODE_REL);
+		else
+			pr_info("watchdog%d running and kernel based pre-userspace handler disabled\n",
+				wdd->id);
+	}
+
+	return 0;
+}
+
+/*
+ *	watchdog_cdev_unregister: unregister watchdog character device
+ *	@watchdog: watchdog device
+ *
+ *	Unregister watchdog character device and if needed the legacy
+ *	/dev/watchdog device.
+ */
+
+static void watchdog_cdev_unregister(struct watchdog_device *wdd)
+{
+	struct watchdog_core_data *wd_data = wdd->wd_data;
+
+	cdev_device_del(&wd_data->cdev, &wd_data->dev);
+	if (wdd->id == 0) {
+		misc_deregister(&watchdog_miscdev);
+		old_wd_data = NULL;
+	}
+
+	if (watchdog_active(wdd) &&
+	    test_bit(WDOG_STOP_ON_UNREGISTER, &wdd->status)) {
+		watchdog_stop(wdd);
+	}
+
+	mutex_lock(&wd_data->lock);
+	wd_data->wdd = NULL;
+	wdd->wd_data = NULL;
+	mutex_unlock(&wd_data->lock);
+
+	hrtimer_cancel(&wd_data->timer);
+	kthread_cancel_work_sync(&wd_data->work);
+
+	put_device(&wd_data->dev);
+}
+
+/*
+ *	watchdog_dev_register: register a watchdog device
+ *	@wdd: watchdog device
+ *
+ *	Register a watchdog device including handling the legacy
+ *	/dev/watchdog node. /dev/watchdog is actually a miscdevice and
+ *	thus we set it up like that.
+ */
+
+int watchdog_dev_register(struct watchdog_device *wdd)
+{
+	int ret;
+
+	ret = watchdog_cdev_register(wdd);
+	if (ret)
+		return ret;
+
+	ret = watchdog_register_pretimeout(wdd);
+	if (ret)
+		watchdog_cdev_unregister(wdd);
+
+	return ret;
+}
+
+/*
+ *	watchdog_dev_unregister: unregister a watchdog device
+ *	@watchdog: watchdog device
+ *
+ *	Unregister watchdog device and if needed the legacy
+ *	/dev/watchdog device.
+ */
+
+void watchdog_dev_unregister(struct watchdog_device *wdd)
+{
+	watchdog_unregister_pretimeout(wdd);
+	watchdog_cdev_unregister(wdd);
+}
+
+/*
+ *	watchdog_dev_init: init dev part of watchdog core
+ *
+ *	Allocate a range of chardev nodes to use for watchdog devices
+ */
+
+int __init watchdog_dev_init(void)
+{
+	int err;
+	struct sched_param param = {.sched_priority = MAX_RT_PRIO - 1,};
+
+	watchdog_kworker = kthread_create_worker(0, "watchdogd");
+	if (IS_ERR(watchdog_kworker)) {
+		pr_err("Failed to create watchdog kworker\n");
+		return PTR_ERR(watchdog_kworker);
+	}
+	sched_setscheduler(watchdog_kworker->task, SCHED_FIFO, &param);
+
+	err = class_register(&watchdog_class);
+	if (err < 0) {
+		pr_err("couldn't register class\n");
+		goto err_register;
+	}
+
+	err = alloc_chrdev_region(&watchdog_devt, 0, MAX_DOGS, "watchdog");
+	if (err < 0) {
+		pr_err("watchdog: unable to allocate char dev region\n");
+		goto err_alloc;
+	}
+
+	return 0;
+
+err_alloc:
+	class_unregister(&watchdog_class);
+err_register:
+	kthread_destroy_worker(watchdog_kworker);
+	return err;
+}
+
+/*
+ *	watchdog_dev_exit: exit dev part of watchdog core
+ *
+ *	Release the range of chardev nodes used for watchdog devices
+ */
+
+void __exit watchdog_dev_exit(void)
+{
+	unregister_chrdev_region(watchdog_devt, MAX_DOGS);
+	class_unregister(&watchdog_class);
+	kthread_destroy_worker(watchdog_kworker);
+}
+
+module_param(handle_boot_enabled, bool, 0444);
+MODULE_PARM_DESC(handle_boot_enabled,
+	"Watchdog core auto-updates boot enabled watchdogs before userspace takes over (default="
+	__MODULE_STRING(IS_ENABLED(CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED)) ")");
diff --git a/drivers/watchdog/watchdog_pretimeout.c b/drivers/watchdog/watchdog_pretimeout.c
new file mode 100644
index 000000000..9db07bfb4
--- /dev/null
+++ b/drivers/watchdog/watchdog_pretimeout.c
@@ -0,0 +1,220 @@
+/*
+ * Copyright (C) 2015-2016 Mentor Graphics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/watchdog.h>
+
+#include "watchdog_pretimeout.h"
+
+/* Default watchdog pretimeout governor */
+static struct watchdog_governor *default_gov;
+
+/* The spinlock protects default_gov, wdd->gov and pretimeout_list */
+static DEFINE_SPINLOCK(pretimeout_lock);
+
+/* List of watchdog devices, which can generate a pretimeout event */
+static LIST_HEAD(pretimeout_list);
+
+struct watchdog_pretimeout {
+	struct watchdog_device		*wdd;
+	struct list_head		entry;
+};
+
+/* The mutex protects governor list and serializes external interfaces */
+static DEFINE_MUTEX(governor_lock);
+
+/* List of the registered watchdog pretimeout governors */
+static LIST_HEAD(governor_list);
+
+struct governor_priv {
+	struct watchdog_governor	*gov;
+	struct list_head		entry;
+};
+
+static struct governor_priv *find_governor_by_name(const char *gov_name)
+{
+	struct governor_priv *priv;
+
+	list_for_each_entry(priv, &governor_list, entry)
+		if (sysfs_streq(gov_name, priv->gov->name))
+			return priv;
+
+	return NULL;
+}
+
+int watchdog_pretimeout_available_governors_get(char *buf)
+{
+	struct governor_priv *priv;
+	int count = 0;
+
+	mutex_lock(&governor_lock);
+
+	list_for_each_entry(priv, &governor_list, entry)
+		count += sprintf(buf + count, "%s\n", priv->gov->name);
+
+	mutex_unlock(&governor_lock);
+
+	return count;
+}
+
+int watchdog_pretimeout_governor_get(struct watchdog_device *wdd, char *buf)
+{
+	int count = 0;
+
+	spin_lock_irq(&pretimeout_lock);
+	if (wdd->gov)
+		count = sprintf(buf, "%s\n", wdd->gov->name);
+	spin_unlock_irq(&pretimeout_lock);
+
+	return count;
+}
+
+int watchdog_pretimeout_governor_set(struct watchdog_device *wdd,
+				     const char *buf)
+{
+	struct governor_priv *priv;
+
+	mutex_lock(&governor_lock);
+
+	priv = find_governor_by_name(buf);
+	if (!priv) {
+		mutex_unlock(&governor_lock);
+		return -EINVAL;
+	}
+
+	spin_lock_irq(&pretimeout_lock);
+	wdd->gov = priv->gov;
+	spin_unlock_irq(&pretimeout_lock);
+
+	mutex_unlock(&governor_lock);
+
+	return 0;
+}
+
+void watchdog_notify_pretimeout(struct watchdog_device *wdd)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&pretimeout_lock, flags);
+	if (!wdd->gov) {
+		spin_unlock_irqrestore(&pretimeout_lock, flags);
+		return;
+	}
+
+	wdd->gov->pretimeout(wdd);
+	spin_unlock_irqrestore(&pretimeout_lock, flags);
+}
+EXPORT_SYMBOL_GPL(watchdog_notify_pretimeout);
+
+int watchdog_register_governor(struct watchdog_governor *gov)
+{
+	struct watchdog_pretimeout *p;
+	struct governor_priv *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mutex_lock(&governor_lock);
+
+	if (find_governor_by_name(gov->name)) {
+		mutex_unlock(&governor_lock);
+		kfree(priv);
+		return -EBUSY;
+	}
+
+	priv->gov = gov;
+	list_add(&priv->entry, &governor_list);
+
+	if (!strncmp(gov->name, WATCHDOG_PRETIMEOUT_DEFAULT_GOV,
+		     WATCHDOG_GOV_NAME_MAXLEN)) {
+		spin_lock_irq(&pretimeout_lock);
+		default_gov = gov;
+
+		list_for_each_entry(p, &pretimeout_list, entry)
+			if (!p->wdd->gov)
+				p->wdd->gov = default_gov;
+		spin_unlock_irq(&pretimeout_lock);
+	}
+
+	mutex_unlock(&governor_lock);
+
+	return 0;
+}
+EXPORT_SYMBOL(watchdog_register_governor);
+
+void watchdog_unregister_governor(struct watchdog_governor *gov)
+{
+	struct watchdog_pretimeout *p;
+	struct governor_priv *priv, *t;
+
+	mutex_lock(&governor_lock);
+
+	list_for_each_entry_safe(priv, t, &governor_list, entry) {
+		if (priv->gov == gov) {
+			list_del(&priv->entry);
+			kfree(priv);
+			break;
+		}
+	}
+
+	spin_lock_irq(&pretimeout_lock);
+	list_for_each_entry(p, &pretimeout_list, entry)
+		if (p->wdd->gov == gov)
+			p->wdd->gov = default_gov;
+	spin_unlock_irq(&pretimeout_lock);
+
+	mutex_unlock(&governor_lock);
+}
+EXPORT_SYMBOL(watchdog_unregister_governor);
+
+int watchdog_register_pretimeout(struct watchdog_device *wdd)
+{
+	struct watchdog_pretimeout *p;
+
+	if (!(wdd->info->options & WDIOF_PRETIMEOUT))
+		return 0;
+
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	spin_lock_irq(&pretimeout_lock);
+	list_add(&p->entry, &pretimeout_list);
+	p->wdd = wdd;
+	wdd->gov = default_gov;
+	spin_unlock_irq(&pretimeout_lock);
+
+	return 0;
+}
+
+void watchdog_unregister_pretimeout(struct watchdog_device *wdd)
+{
+	struct watchdog_pretimeout *p, *t;
+
+	if (!(wdd->info->options & WDIOF_PRETIMEOUT))
+		return;
+
+	spin_lock_irq(&pretimeout_lock);
+	wdd->gov = NULL;
+
+	list_for_each_entry_safe(p, t, &pretimeout_list, entry) {
+		if (p->wdd == wdd) {
+			list_del(&p->entry);
+			break;
+		}
+	}
+	spin_unlock_irq(&pretimeout_lock);
+
+	kfree(p);
+}
diff --git a/drivers/watchdog/watchdog_pretimeout.h b/drivers/watchdog/watchdog_pretimeout.h
new file mode 100644
index 000000000..a3f1abc68
--- /dev/null
+++ b/drivers/watchdog/watchdog_pretimeout.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __WATCHDOG_PRETIMEOUT_H
+#define __WATCHDOG_PRETIMEOUT_H
+
+#define WATCHDOG_GOV_NAME_MAXLEN	20
+
+struct watchdog_device;
+
+struct watchdog_governor {
+	const char	name[WATCHDOG_GOV_NAME_MAXLEN];
+	void		(*pretimeout)(struct watchdog_device *wdd);
+};
+
+#if IS_ENABLED(CONFIG_WATCHDOG_PRETIMEOUT_GOV)
+/* Interfaces to watchdog pretimeout governors */
+int watchdog_register_governor(struct watchdog_governor *gov);
+void watchdog_unregister_governor(struct watchdog_governor *gov);
+
+/* Interfaces to watchdog_dev.c */
+int watchdog_register_pretimeout(struct watchdog_device *wdd);
+void watchdog_unregister_pretimeout(struct watchdog_device *wdd);
+int watchdog_pretimeout_available_governors_get(char *buf);
+int watchdog_pretimeout_governor_get(struct watchdog_device *wdd, char *buf);
+int watchdog_pretimeout_governor_set(struct watchdog_device *wdd,
+				     const char *buf);
+
+#if IS_ENABLED(CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP)
+#define WATCHDOG_PRETIMEOUT_DEFAULT_GOV		"noop"
+#elif IS_ENABLED(CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC)
+#define WATCHDOG_PRETIMEOUT_DEFAULT_GOV		"panic"
+#endif
+
+#else
+static inline int watchdog_register_pretimeout(struct watchdog_device *wdd)
+{
+	return 0;
+}
+
+static inline void watchdog_unregister_pretimeout(struct watchdog_device *wdd)
+{
+}
+
+static inline int watchdog_pretimeout_available_governors_get(char *buf)
+{
+	return -EINVAL;
+}
+
+static inline int watchdog_pretimeout_governor_get(struct watchdog_device *wdd,
+						   char *buf)
+{
+	return -EINVAL;
+}
+
+static inline int watchdog_pretimeout_governor_set(struct watchdog_device *wdd,
+						   const char *buf)
+{
+	return -EINVAL;
+}
+#endif
+
+#endif
diff --git a/drivers/watchdog/wd501p.h b/drivers/watchdog/wd501p.h
new file mode 100644
index 000000000..0e3a497d5
--- /dev/null
+++ b/drivers/watchdog/wd501p.h
@@ -0,0 +1,51 @@
+/*
+ *	Industrial Computer Source WDT500/501 driver
+ *
+ *	(c) Copyright 1995	CymruNET Ltd
+ *				Innovation Centre
+ *				Singleton Park
+ *				Swansea
+ *				Wales
+ *				UK
+ *				SA2 8PP
+ *
+ *	http://www.cymru.net
+ *
+ *	This driver is provided under the GNU General Public License,
+ *	incorporated herein by reference. The driver is provided without
+ *	warranty or support.
+ *
+ *	Release 0.04.
+ *
+ */
+
+
+#define WDT_COUNT0		(io+0)
+#define WDT_COUNT1		(io+1)
+#define WDT_COUNT2		(io+2)
+#define WDT_CR			(io+3)
+#define WDT_SR			(io+4)	/* Start buzzer on PCI write */
+#define WDT_RT			(io+5)	/* Stop buzzer on PCI write */
+#define WDT_BUZZER		(io+6)	/* PCI only: rd=disable, wr=enable */
+#define WDT_DC			(io+7)
+
+/* The following are only on the PCI card, they're outside of I/O space on
+ * the ISA card: */
+#define WDT_CLOCK		(io+12)	/* COUNT2: rd=16.67MHz, wr=2.0833MHz */
+/* inverted opto isolated reset output: */
+#define WDT_OPTONOTRST		(io+13)	/* wr=enable, rd=disable */
+/* opto isolated reset output: */
+#define WDT_OPTORST		(io+14)	/* wr=enable, rd=disable */
+/* programmable outputs: */
+#define WDT_PROGOUT		(io+15)	/* wr=enable, rd=disable */
+
+							 /* FAN 501 500 */
+#define WDC_SR_WCCR		1	/* Active low */ /*  X   X   X  */
+#define WDC_SR_TGOOD		2			 /*  X   X   -  */
+#define WDC_SR_ISOI0		4			 /*  X   X   X  */
+#define WDC_SR_ISII1		8			 /*  X   X   X  */
+#define WDC_SR_FANGOOD		16			 /*  X   -   -  */
+#define WDC_SR_PSUOVER		32	/* Active low */ /*  X   X   -  */
+#define WDC_SR_PSUUNDR		64	/* Active low */ /*  X   X   -  */
+#define WDC_SR_IRQ		128	/* Active low */ /*  X   X   X  */
+
diff --git a/drivers/watchdog/wdat_wdt.c b/drivers/watchdog/wdat_wdt.c
new file mode 100644
index 000000000..9d91ed596
--- /dev/null
+++ b/drivers/watchdog/wdat_wdt.c
@@ -0,0 +1,528 @@
+/*
+ * ACPI Hardware Watchdog (WDAT) driver.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/watchdog.h>
+
+#define MAX_WDAT_ACTIONS ACPI_WDAT_ACTION_RESERVED
+
+/**
+ * struct wdat_instruction - Single ACPI WDAT instruction
+ * @entry: Copy of the ACPI table instruction
+ * @reg: Register the instruction is accessing
+ * @node: Next instruction in action sequence
+ */
+struct wdat_instruction {
+	struct acpi_wdat_entry entry;
+	void __iomem *reg;
+	struct list_head node;
+};
+
+/**
+ * struct wdat_wdt - ACPI WDAT watchdog device
+ * @pdev: Parent platform device
+ * @wdd: Watchdog core device
+ * @period: How long is one watchdog period in ms
+ * @stopped_in_sleep: Is this watchdog stopped by the firmware in S1-S5
+ * @stopped: Was the watchdog stopped by the driver in suspend
+ * @actions: An array of instruction lists indexed by an action number from
+ *           the WDAT table. There can be %NULL entries for not implemented
+ *           actions.
+ */
+struct wdat_wdt {
+	struct platform_device *pdev;
+	struct watchdog_device wdd;
+	unsigned int period;
+	bool stopped_in_sleep;
+	bool stopped;
+	struct list_head *instructions[MAX_WDAT_ACTIONS];
+};
+
+#define to_wdat_wdt(wdd) container_of(wdd, struct wdat_wdt, wdd)
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int wdat_wdt_read(struct wdat_wdt *wdat,
+	 const struct wdat_instruction *instr, u32 *value)
+{
+	const struct acpi_generic_address *gas = &instr->entry.register_region;
+
+	switch (gas->access_width) {
+	case 1:
+		*value = ioread8(instr->reg);
+		break;
+	case 2:
+		*value = ioread16(instr->reg);
+		break;
+	case 3:
+		*value = ioread32(instr->reg);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	dev_dbg(&wdat->pdev->dev, "Read %#x from 0x%08llx\n", *value,
+		gas->address);
+
+	return 0;
+}
+
+static int wdat_wdt_write(struct wdat_wdt *wdat,
+	const struct wdat_instruction *instr, u32 value)
+{
+	const struct acpi_generic_address *gas = &instr->entry.register_region;
+
+	switch (gas->access_width) {
+	case 1:
+		iowrite8((u8)value, instr->reg);
+		break;
+	case 2:
+		iowrite16((u16)value, instr->reg);
+		break;
+	case 3:
+		iowrite32(value, instr->reg);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	dev_dbg(&wdat->pdev->dev, "Wrote %#x to 0x%08llx\n", value,
+		gas->address);
+
+	return 0;
+}
+
+static int wdat_wdt_run_action(struct wdat_wdt *wdat, unsigned int action,
+			       u32 param, u32 *retval)
+{
+	struct wdat_instruction *instr;
+
+	if (action >= ARRAY_SIZE(wdat->instructions))
+		return -EINVAL;
+
+	if (!wdat->instructions[action])
+		return -EOPNOTSUPP;
+
+	dev_dbg(&wdat->pdev->dev, "Running action %#x\n", action);
+
+	/* Run each instruction sequentially */
+	list_for_each_entry(instr, wdat->instructions[action], node) {
+		const struct acpi_wdat_entry *entry = &instr->entry;
+		const struct acpi_generic_address *gas;
+		u32 flags, value, mask, x, y;
+		bool preserve;
+		int ret;
+
+		gas = &entry->register_region;
+
+		preserve = entry->instruction & ACPI_WDAT_PRESERVE_REGISTER;
+		flags = entry->instruction & ~ACPI_WDAT_PRESERVE_REGISTER;
+		value = entry->value;
+		mask = entry->mask;
+
+		switch (flags) {
+		case ACPI_WDAT_READ_VALUE:
+			ret = wdat_wdt_read(wdat, instr, &x);
+			if (ret)
+				return ret;
+			x >>= gas->bit_offset;
+			x &= mask;
+			if (retval)
+				*retval = x == value;
+			break;
+
+		case ACPI_WDAT_READ_COUNTDOWN:
+			ret = wdat_wdt_read(wdat, instr, &x);
+			if (ret)
+				return ret;
+			x >>= gas->bit_offset;
+			x &= mask;
+			if (retval)
+				*retval = x;
+			break;
+
+		case ACPI_WDAT_WRITE_VALUE:
+			x = value & mask;
+			x <<= gas->bit_offset;
+			if (preserve) {
+				ret = wdat_wdt_read(wdat, instr, &y);
+				if (ret)
+					return ret;
+				y = y & ~(mask << gas->bit_offset);
+				x |= y;
+			}
+			ret = wdat_wdt_write(wdat, instr, x);
+			if (ret)
+				return ret;
+			break;
+
+		case ACPI_WDAT_WRITE_COUNTDOWN:
+			x = param;
+			x &= mask;
+			x <<= gas->bit_offset;
+			if (preserve) {
+				ret = wdat_wdt_read(wdat, instr, &y);
+				if (ret)
+					return ret;
+				y = y & ~(mask << gas->bit_offset);
+				x |= y;
+			}
+			ret = wdat_wdt_write(wdat, instr, x);
+			if (ret)
+				return ret;
+			break;
+
+		default:
+			dev_err(&wdat->pdev->dev, "Unknown instruction: %u\n",
+				flags);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int wdat_wdt_enable_reboot(struct wdat_wdt *wdat)
+{
+	int ret;
+
+	/*
+	 * WDAT specification says that the watchdog is required to reboot
+	 * the system when it fires. However, it also states that it is
+	 * recommeded to make it configurable through hardware register. We
+	 * enable reboot now if it is configrable, just in case.
+	 */
+	ret = wdat_wdt_run_action(wdat, ACPI_WDAT_SET_REBOOT, 0, NULL);
+	if (ret && ret != -EOPNOTSUPP) {
+		dev_err(&wdat->pdev->dev,
+			"Failed to enable reboot when watchdog triggers\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void wdat_wdt_boot_status(struct wdat_wdt *wdat)
+{
+	u32 boot_status = 0;
+	int ret;
+
+	ret = wdat_wdt_run_action(wdat, ACPI_WDAT_GET_STATUS, 0, &boot_status);
+	if (ret && ret != -EOPNOTSUPP) {
+		dev_err(&wdat->pdev->dev, "Failed to read boot status\n");
+		return;
+	}
+
+	if (boot_status)
+		wdat->wdd.bootstatus = WDIOF_CARDRESET;
+
+	/* Clear the boot status in case BIOS did not do it */
+	ret = wdat_wdt_run_action(wdat, ACPI_WDAT_SET_STATUS, 0, NULL);
+	if (ret && ret != -EOPNOTSUPP)
+		dev_err(&wdat->pdev->dev, "Failed to clear boot status\n");
+}
+
+static void wdat_wdt_set_running(struct wdat_wdt *wdat)
+{
+	u32 running = 0;
+	int ret;
+
+	ret = wdat_wdt_run_action(wdat, ACPI_WDAT_GET_RUNNING_STATE, 0,
+				  &running);
+	if (ret && ret != -EOPNOTSUPP)
+		dev_err(&wdat->pdev->dev, "Failed to read running state\n");
+
+	if (running)
+		set_bit(WDOG_HW_RUNNING, &wdat->wdd.status);
+}
+
+static int wdat_wdt_start(struct watchdog_device *wdd)
+{
+	return wdat_wdt_run_action(to_wdat_wdt(wdd),
+				   ACPI_WDAT_SET_RUNNING_STATE, 0, NULL);
+}
+
+static int wdat_wdt_stop(struct watchdog_device *wdd)
+{
+	return wdat_wdt_run_action(to_wdat_wdt(wdd),
+				   ACPI_WDAT_SET_STOPPED_STATE, 0, NULL);
+}
+
+static int wdat_wdt_ping(struct watchdog_device *wdd)
+{
+	return wdat_wdt_run_action(to_wdat_wdt(wdd), ACPI_WDAT_RESET, 0, NULL);
+}
+
+static int wdat_wdt_set_timeout(struct watchdog_device *wdd,
+				unsigned int timeout)
+{
+	struct wdat_wdt *wdat = to_wdat_wdt(wdd);
+	unsigned int periods;
+	int ret;
+
+	periods = timeout * 1000 / wdat->period;
+	ret = wdat_wdt_run_action(wdat, ACPI_WDAT_SET_COUNTDOWN, periods, NULL);
+	if (!ret)
+		wdd->timeout = timeout;
+	return ret;
+}
+
+static unsigned int wdat_wdt_get_timeleft(struct watchdog_device *wdd)
+{
+	struct wdat_wdt *wdat = to_wdat_wdt(wdd);
+	u32 periods = 0;
+
+	wdat_wdt_run_action(wdat, ACPI_WDAT_GET_COUNTDOWN, 0, &periods);
+	return periods * wdat->period / 1000;
+}
+
+static const struct watchdog_info wdat_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.firmware_version = 0,
+	.identity = "wdat_wdt",
+};
+
+static const struct watchdog_ops wdat_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = wdat_wdt_start,
+	.stop = wdat_wdt_stop,
+	.ping = wdat_wdt_ping,
+	.set_timeout = wdat_wdt_set_timeout,
+	.get_timeleft = wdat_wdt_get_timeleft,
+};
+
+static int wdat_wdt_probe(struct platform_device *pdev)
+{
+	const struct acpi_wdat_entry *entries;
+	const struct acpi_table_wdat *tbl;
+	struct wdat_wdt *wdat;
+	struct resource *res;
+	void __iomem **regs;
+	acpi_status status;
+	int i, ret;
+
+	status = acpi_get_table(ACPI_SIG_WDAT, 0,
+				(struct acpi_table_header **)&tbl);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	wdat = devm_kzalloc(&pdev->dev, sizeof(*wdat), GFP_KERNEL);
+	if (!wdat)
+		return -ENOMEM;
+
+	regs = devm_kcalloc(&pdev->dev, pdev->num_resources, sizeof(*regs),
+			    GFP_KERNEL);
+	if (!regs)
+		return -ENOMEM;
+
+	/* WDAT specification wants to have >= 1ms period */
+	if (tbl->timer_period < 1)
+		return -EINVAL;
+	if (tbl->min_count > tbl->max_count)
+		return -EINVAL;
+
+	wdat->period = tbl->timer_period;
+	wdat->wdd.min_hw_heartbeat_ms = wdat->period * tbl->min_count;
+	wdat->wdd.max_hw_heartbeat_ms = wdat->period * tbl->max_count;
+	wdat->stopped_in_sleep = tbl->flags & ACPI_WDAT_STOPPED;
+	wdat->wdd.info = &wdat_wdt_info;
+	wdat->wdd.ops = &wdat_wdt_ops;
+	wdat->pdev = pdev;
+
+	/* Request and map all resources */
+	for (i = 0; i < pdev->num_resources; i++) {
+		void __iomem *reg;
+
+		res = &pdev->resource[i];
+		if (resource_type(res) == IORESOURCE_MEM) {
+			reg = devm_ioremap_resource(&pdev->dev, res);
+			if (IS_ERR(reg))
+				return PTR_ERR(reg);
+		} else if (resource_type(res) == IORESOURCE_IO) {
+			reg = devm_ioport_map(&pdev->dev, res->start, 1);
+			if (!reg)
+				return -ENOMEM;
+		} else {
+			dev_err(&pdev->dev, "Unsupported resource\n");
+			return -EINVAL;
+		}
+
+		regs[i] = reg;
+	}
+
+	entries = (struct acpi_wdat_entry *)(tbl + 1);
+	for (i = 0; i < tbl->entries; i++) {
+		const struct acpi_generic_address *gas;
+		struct wdat_instruction *instr;
+		struct list_head *instructions;
+		unsigned int action;
+		struct resource r;
+		int j;
+
+		action = entries[i].action;
+		if (action >= MAX_WDAT_ACTIONS) {
+			dev_dbg(&pdev->dev, "Skipping unknown action: %u\n",
+				action);
+			continue;
+		}
+
+		instr = devm_kzalloc(&pdev->dev, sizeof(*instr), GFP_KERNEL);
+		if (!instr)
+			return -ENOMEM;
+
+		INIT_LIST_HEAD(&instr->node);
+		instr->entry = entries[i];
+
+		gas = &entries[i].register_region;
+
+		memset(&r, 0, sizeof(r));
+		r.start = gas->address;
+		r.end = r.start + ACPI_ACCESS_BYTE_WIDTH(gas->access_width) - 1;
+		if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+			r.flags = IORESOURCE_MEM;
+		} else if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
+			r.flags = IORESOURCE_IO;
+		} else {
+			dev_dbg(&pdev->dev, "Unsupported address space: %d\n",
+				gas->space_id);
+			continue;
+		}
+
+		/* Find the matching resource */
+		for (j = 0; j < pdev->num_resources; j++) {
+			res = &pdev->resource[j];
+			if (resource_contains(res, &r)) {
+				instr->reg = regs[j] + r.start - res->start;
+				break;
+			}
+		}
+
+		if (!instr->reg) {
+			dev_err(&pdev->dev, "I/O resource not found\n");
+			return -EINVAL;
+		}
+
+		instructions = wdat->instructions[action];
+		if (!instructions) {
+			instructions = devm_kzalloc(&pdev->dev,
+					sizeof(*instructions), GFP_KERNEL);
+			if (!instructions)
+				return -ENOMEM;
+
+			INIT_LIST_HEAD(instructions);
+			wdat->instructions[action] = instructions;
+		}
+
+		list_add_tail(&instr->node, instructions);
+	}
+
+	wdat_wdt_boot_status(wdat);
+	wdat_wdt_set_running(wdat);
+
+	ret = wdat_wdt_enable_reboot(wdat);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, wdat);
+
+	watchdog_set_nowayout(&wdat->wdd, nowayout);
+	return devm_watchdog_register_device(&pdev->dev, &wdat->wdd);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int wdat_wdt_suspend_noirq(struct device *dev)
+{
+	struct wdat_wdt *wdat = dev_get_drvdata(dev);
+	int ret;
+
+	if (!watchdog_active(&wdat->wdd))
+		return 0;
+
+	/*
+	 * We need to stop the watchdog if firmare is not doing it or if we
+	 * are going suspend to idle (where firmware is not involved). If
+	 * firmware is stopping the watchdog we kick it here one more time
+	 * to give it some time.
+	 */
+	wdat->stopped = false;
+	if (acpi_target_system_state() == ACPI_STATE_S0 ||
+	    !wdat->stopped_in_sleep) {
+		ret = wdat_wdt_stop(&wdat->wdd);
+		if (!ret)
+			wdat->stopped = true;
+	} else {
+		ret = wdat_wdt_ping(&wdat->wdd);
+	}
+
+	return ret;
+}
+
+static int wdat_wdt_resume_noirq(struct device *dev)
+{
+	struct wdat_wdt *wdat = dev_get_drvdata(dev);
+	int ret;
+
+	if (!watchdog_active(&wdat->wdd))
+		return 0;
+
+	if (!wdat->stopped) {
+		/*
+		 * Looks like the boot firmware reinitializes the watchdog
+		 * before it hands off to the OS on resume from sleep so we
+		 * stop and reprogram the watchdog here.
+		 */
+		ret = wdat_wdt_stop(&wdat->wdd);
+		if (ret)
+			return ret;
+
+		ret = wdat_wdt_set_timeout(&wdat->wdd, wdat->wdd.timeout);
+		if (ret)
+			return ret;
+
+		ret = wdat_wdt_enable_reboot(wdat);
+		if (ret)
+			return ret;
+
+		ret = wdat_wdt_ping(&wdat->wdd);
+		if (ret)
+			return ret;
+	}
+
+	return wdat_wdt_start(&wdat->wdd);
+}
+#endif
+
+static const struct dev_pm_ops wdat_wdt_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(wdat_wdt_suspend_noirq,
+				      wdat_wdt_resume_noirq)
+};
+
+static struct platform_driver wdat_wdt_driver = {
+	.probe = wdat_wdt_probe,
+	.driver = {
+		.name = "wdat_wdt",
+		.pm = &wdat_wdt_pm_ops,
+	},
+};
+
+module_platform_driver(wdat_wdt_driver);
+
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_DESCRIPTION("ACPI Hardware Watchdog (WDAT) driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:wdat_wdt");
diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c
new file mode 100644
index 000000000..0240c60d1
--- /dev/null
+++ b/drivers/watchdog/wdrtas.c
@@ -0,0 +1,640 @@
+/*
+ * FIXME: add wdrtas_get_status and wdrtas_get_boot_status as soon as
+ * RTAS calls are available
+ */
+
+/*
+ * RTAS watchdog driver
+ *
+ * (C) Copyright IBM Corp. 2005
+ * device driver to exploit watchdog RTAS functions
+ *
+ * Authors : Utz Bacher <utz.bacher@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+#include <linux/uaccess.h>
+
+#include <asm/rtas.h>
+
+#define WDRTAS_MAGIC_CHAR		42
+#define WDRTAS_SUPPORTED_MASK		(WDIOF_SETTIMEOUT | \
+					 WDIOF_MAGICCLOSE)
+
+MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com>");
+MODULE_DESCRIPTION("RTAS watchdog driver");
+MODULE_LICENSE("GPL");
+
+static bool wdrtas_nowayout = WATCHDOG_NOWAYOUT;
+static atomic_t wdrtas_miscdev_open = ATOMIC_INIT(0);
+static char wdrtas_expect_close;
+
+static int wdrtas_interval;
+
+#define WDRTAS_THERMAL_SENSOR		3
+static int wdrtas_token_get_sensor_state;
+#define WDRTAS_SURVEILLANCE_IND		9000
+static int wdrtas_token_set_indicator;
+#define WDRTAS_SP_SPI			28
+static int wdrtas_token_get_sp;
+static int wdrtas_token_event_scan;
+
+#define WDRTAS_DEFAULT_INTERVAL		300
+
+#define WDRTAS_LOGBUFFER_LEN		128
+static char wdrtas_logbuffer[WDRTAS_LOGBUFFER_LEN];
+
+
+/*** watchdog access functions */
+
+/**
+ * wdrtas_set_interval - sets the watchdog interval
+ * @interval: new interval
+ *
+ * returns 0 on success, <0 on failures
+ *
+ * wdrtas_set_interval sets the watchdog keepalive interval by calling the
+ * RTAS function set-indicator (surveillance). The unit of interval is
+ * seconds.
+ */
+
+static int wdrtas_set_interval(int interval)
+{
+	long result;
+	static int print_msg = 10;
+
+	/* rtas uses minutes */
+	interval = (interval + 59) / 60;
+
+	result = rtas_call(wdrtas_token_set_indicator, 3, 1, NULL,
+			   WDRTAS_SURVEILLANCE_IND, 0, interval);
+	if (result < 0 && print_msg) {
+		pr_err("setting the watchdog to %i timeout failed: %li\n",
+		       interval, result);
+		print_msg--;
+	}
+
+	return result;
+}
+
+#define WDRTAS_SP_SPI_LEN 4
+
+/**
+ * wdrtas_get_interval - returns the current watchdog interval
+ * @fallback_value: value (in seconds) to use, if the RTAS call fails
+ *
+ * returns the interval
+ *
+ * wdrtas_get_interval returns the current watchdog keepalive interval
+ * as reported by the RTAS function ibm,get-system-parameter. The unit
+ * of the return value is seconds.
+ */
+static int wdrtas_get_interval(int fallback_value)
+{
+	long result;
+	char value[WDRTAS_SP_SPI_LEN];
+
+	spin_lock(&rtas_data_buf_lock);
+	memset(rtas_data_buf, 0, WDRTAS_SP_SPI_LEN);
+	result = rtas_call(wdrtas_token_get_sp, 3, 1, NULL,
+			   WDRTAS_SP_SPI, __pa(rtas_data_buf),
+			   WDRTAS_SP_SPI_LEN);
+
+	memcpy(value, rtas_data_buf, WDRTAS_SP_SPI_LEN);
+	spin_unlock(&rtas_data_buf_lock);
+
+	if (value[0] != 0 || value[1] != 2 || value[3] != 0 || result < 0) {
+		pr_warn("could not get sp_spi watchdog timeout (%li). Continuing\n",
+			result);
+		return fallback_value;
+	}
+
+	/* rtas uses minutes */
+	return ((int)value[2]) * 60;
+}
+
+/**
+ * wdrtas_timer_start - starts watchdog
+ *
+ * wdrtas_timer_start starts the watchdog by calling the RTAS function
+ * set-interval (surveillance)
+ */
+static void wdrtas_timer_start(void)
+{
+	wdrtas_set_interval(wdrtas_interval);
+}
+
+/**
+ * wdrtas_timer_stop - stops watchdog
+ *
+ * wdrtas_timer_stop stops the watchdog timer by calling the RTAS function
+ * set-interval (surveillance)
+ */
+static void wdrtas_timer_stop(void)
+{
+	wdrtas_set_interval(0);
+}
+
+/**
+ * wdrtas_timer_keepalive - resets watchdog timer to keep system alive
+ *
+ * wdrtas_timer_keepalive restarts the watchdog timer by calling the
+ * RTAS function event-scan and repeats these calls as long as there are
+ * events available. All events will be dumped.
+ */
+static void wdrtas_timer_keepalive(void)
+{
+	long result;
+
+	do {
+		result = rtas_call(wdrtas_token_event_scan, 4, 1, NULL,
+				   RTAS_EVENT_SCAN_ALL_EVENTS, 0,
+				   (void *)__pa(wdrtas_logbuffer),
+				   WDRTAS_LOGBUFFER_LEN);
+		if (result < 0)
+			pr_err("event-scan failed: %li\n", result);
+		if (result == 0)
+			print_hex_dump(KERN_INFO, "dumping event, data: ",
+				DUMP_PREFIX_OFFSET, 16, 1,
+				wdrtas_logbuffer, WDRTAS_LOGBUFFER_LEN, false);
+	} while (result == 0);
+}
+
+/**
+ * wdrtas_get_temperature - returns current temperature
+ *
+ * returns temperature or <0 on failures
+ *
+ * wdrtas_get_temperature returns the current temperature in Fahrenheit. It
+ * uses the RTAS call get-sensor-state, token 3 to do so
+ */
+static int wdrtas_get_temperature(void)
+{
+	int result;
+	int temperature = 0;
+
+	result = rtas_get_sensor(WDRTAS_THERMAL_SENSOR, 0, &temperature);
+
+	if (result < 0)
+		pr_warn("reading the thermal sensor failed: %i\n", result);
+	else
+		temperature = ((temperature * 9) / 5) + 32; /* fahrenheit */
+
+	return temperature;
+}
+
+/**
+ * wdrtas_get_status - returns the status of the watchdog
+ *
+ * returns a bitmask of defines WDIOF_... as defined in
+ * include/linux/watchdog.h
+ */
+static int wdrtas_get_status(void)
+{
+	return 0; /* TODO */
+}
+
+/**
+ * wdrtas_get_boot_status - returns the reason for the last boot
+ *
+ * returns a bitmask of defines WDIOF_... as defined in
+ * include/linux/watchdog.h, indicating why the watchdog rebooted the system
+ */
+static int wdrtas_get_boot_status(void)
+{
+	return 0; /* TODO */
+}
+
+/*** watchdog API and operations stuff */
+
+/* wdrtas_write - called when watchdog device is written to
+ * @file: file structure
+ * @buf: user buffer with data
+ * @len: amount to data written
+ * @ppos: position in file
+ *
+ * returns the number of successfully processed characters, which is always
+ * the number of bytes passed to this function
+ *
+ * wdrtas_write processes all the data given to it and looks for the magic
+ * character 'V'. This character allows the watchdog device to be closed
+ * properly.
+ */
+static ssize_t wdrtas_write(struct file *file, const char __user *buf,
+	     size_t len, loff_t *ppos)
+{
+	int i;
+	char c;
+
+	if (!len)
+		goto out;
+
+	if (!wdrtas_nowayout) {
+		wdrtas_expect_close = 0;
+		/* look for 'V' */
+		for (i = 0; i < len; i++) {
+			if (get_user(c, buf + i))
+				return -EFAULT;
+			/* allow to close device */
+			if (c == 'V')
+				wdrtas_expect_close = WDRTAS_MAGIC_CHAR;
+		}
+	}
+
+	wdrtas_timer_keepalive();
+
+out:
+	return len;
+}
+
+/**
+ * wdrtas_ioctl - ioctl function for the watchdog device
+ * @file: file structure
+ * @cmd: command for ioctl
+ * @arg: argument pointer
+ *
+ * returns 0 on success, <0 on failure
+ *
+ * wdrtas_ioctl implements the watchdog API ioctls
+ */
+
+static long wdrtas_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	int __user *argp = (void __user *)arg;
+	int i;
+	static const struct watchdog_info wdinfo = {
+		.options = WDRTAS_SUPPORTED_MASK,
+		.firmware_version = 0,
+		.identity = "wdrtas",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &wdinfo, sizeof(wdinfo)))
+			return -EFAULT;
+		return 0;
+
+	case WDIOC_GETSTATUS:
+		i = wdrtas_get_status();
+		return put_user(i, argp);
+
+	case WDIOC_GETBOOTSTATUS:
+		i = wdrtas_get_boot_status();
+		return put_user(i, argp);
+
+	case WDIOC_GETTEMP:
+		if (wdrtas_token_get_sensor_state == RTAS_UNKNOWN_SERVICE)
+			return -EOPNOTSUPP;
+
+		i = wdrtas_get_temperature();
+		return put_user(i, argp);
+
+	case WDIOC_SETOPTIONS:
+		if (get_user(i, argp))
+			return -EFAULT;
+		if (i & WDIOS_DISABLECARD)
+			wdrtas_timer_stop();
+		if (i & WDIOS_ENABLECARD) {
+			wdrtas_timer_keepalive();
+			wdrtas_timer_start();
+		}
+		/* not implemented. Done by H8
+		if (i & WDIOS_TEMPPANIC) {
+		} */
+		return 0;
+
+	case WDIOC_KEEPALIVE:
+		wdrtas_timer_keepalive();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(i, argp))
+			return -EFAULT;
+
+		if (wdrtas_set_interval(i))
+			return -EINVAL;
+
+		wdrtas_timer_keepalive();
+
+		if (wdrtas_token_get_sp == RTAS_UNKNOWN_SERVICE)
+			wdrtas_interval = i;
+		else
+			wdrtas_interval = wdrtas_get_interval(i);
+		/* fallthrough */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(wdrtas_interval, argp);
+
+	default:
+		return -ENOTTY;
+	}
+}
+
+/**
+ * wdrtas_open - open function of watchdog device
+ * @inode: inode structure
+ * @file: file structure
+ *
+ * returns 0 on success, -EBUSY if the file has been opened already, <0 on
+ * other failures
+ *
+ * function called when watchdog device is opened
+ */
+static int wdrtas_open(struct inode *inode, struct file *file)
+{
+	/* only open once */
+	if (atomic_inc_return(&wdrtas_miscdev_open) > 1) {
+		atomic_dec(&wdrtas_miscdev_open);
+		return -EBUSY;
+	}
+
+	wdrtas_timer_start();
+	wdrtas_timer_keepalive();
+
+	return nonseekable_open(inode, file);
+}
+
+/**
+ * wdrtas_close - close function of watchdog device
+ * @inode: inode structure
+ * @file: file structure
+ *
+ * returns 0 on success
+ *
+ * close function. Always succeeds
+ */
+static int wdrtas_close(struct inode *inode, struct file *file)
+{
+	/* only stop watchdog, if this was announced using 'V' before */
+	if (wdrtas_expect_close == WDRTAS_MAGIC_CHAR)
+		wdrtas_timer_stop();
+	else {
+		pr_warn("got unexpected close. Watchdog not stopped.\n");
+		wdrtas_timer_keepalive();
+	}
+
+	wdrtas_expect_close = 0;
+	atomic_dec(&wdrtas_miscdev_open);
+	return 0;
+}
+
+/**
+ * wdrtas_temp_read - gives back the temperature in fahrenheit
+ * @file: file structure
+ * @buf: user buffer
+ * @count: number of bytes to be read
+ * @ppos: position in file
+ *
+ * returns always 1 or -EFAULT in case of user space copy failures, <0 on
+ * other failures
+ *
+ * wdrtas_temp_read gives the temperature to the users by copying this
+ * value as one byte into the user space buffer. The unit is Fahrenheit...
+ */
+static ssize_t wdrtas_temp_read(struct file *file, char __user *buf,
+		 size_t count, loff_t *ppos)
+{
+	int temperature = 0;
+
+	temperature = wdrtas_get_temperature();
+	if (temperature < 0)
+		return temperature;
+
+	if (copy_to_user(buf, &temperature, 1))
+		return -EFAULT;
+
+	return 1;
+}
+
+/**
+ * wdrtas_temp_open - open function of temperature device
+ * @inode: inode structure
+ * @file: file structure
+ *
+ * returns 0 on success, <0 on failure
+ *
+ * function called when temperature device is opened
+ */
+static int wdrtas_temp_open(struct inode *inode, struct file *file)
+{
+	return nonseekable_open(inode, file);
+}
+
+/**
+ * wdrtas_temp_close - close function of temperature device
+ * @inode: inode structure
+ * @file: file structure
+ *
+ * returns 0 on success
+ *
+ * close function. Always succeeds
+ */
+static int wdrtas_temp_close(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+/**
+ * wdrtas_reboot - reboot notifier function
+ * @nb: notifier block structure
+ * @code: reboot code
+ * @ptr: unused
+ *
+ * returns NOTIFY_DONE
+ *
+ * wdrtas_reboot stops the watchdog in case of a reboot
+ */
+static int wdrtas_reboot(struct notifier_block *this,
+					unsigned long code, void *ptr)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		wdrtas_timer_stop();
+
+	return NOTIFY_DONE;
+}
+
+/*** initialization stuff */
+
+static const struct file_operations wdrtas_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= wdrtas_write,
+	.unlocked_ioctl	= wdrtas_ioctl,
+	.open		= wdrtas_open,
+	.release	= wdrtas_close,
+};
+
+static struct miscdevice wdrtas_miscdev = {
+	.minor =	WATCHDOG_MINOR,
+	.name =		"watchdog",
+	.fops =		&wdrtas_fops,
+};
+
+static const struct file_operations wdrtas_temp_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.read		= wdrtas_temp_read,
+	.open		= wdrtas_temp_open,
+	.release	= wdrtas_temp_close,
+};
+
+static struct miscdevice wdrtas_tempdev = {
+	.minor =	TEMP_MINOR,
+	.name =		"temperature",
+	.fops =		&wdrtas_temp_fops,
+};
+
+static struct notifier_block wdrtas_notifier = {
+	.notifier_call =	wdrtas_reboot,
+};
+
+/**
+ * wdrtas_get_tokens - reads in RTAS tokens
+ *
+ * returns 0 on success, <0 on failure
+ *
+ * wdrtas_get_tokens reads in the tokens for the RTAS calls used in
+ * this watchdog driver. It tolerates, if "get-sensor-state" and
+ * "ibm,get-system-parameter" are not available.
+ */
+static int wdrtas_get_tokens(void)
+{
+	wdrtas_token_get_sensor_state = rtas_token("get-sensor-state");
+	if (wdrtas_token_get_sensor_state == RTAS_UNKNOWN_SERVICE) {
+		pr_warn("couldn't get token for get-sensor-state. Trying to continue without temperature support.\n");
+	}
+
+	wdrtas_token_get_sp = rtas_token("ibm,get-system-parameter");
+	if (wdrtas_token_get_sp == RTAS_UNKNOWN_SERVICE) {
+		pr_warn("couldn't get token for ibm,get-system-parameter. Trying to continue with a default timeout value of %i seconds.\n",
+			WDRTAS_DEFAULT_INTERVAL);
+	}
+
+	wdrtas_token_set_indicator = rtas_token("set-indicator");
+	if (wdrtas_token_set_indicator == RTAS_UNKNOWN_SERVICE) {
+		pr_err("couldn't get token for set-indicator. Terminating watchdog code.\n");
+		return -EIO;
+	}
+
+	wdrtas_token_event_scan = rtas_token("event-scan");
+	if (wdrtas_token_event_scan == RTAS_UNKNOWN_SERVICE) {
+		pr_err("couldn't get token for event-scan. Terminating watchdog code.\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * wdrtas_unregister_devs - unregisters the misc dev handlers
+ *
+ * wdrtas_register_devs unregisters the watchdog and temperature watchdog
+ * misc devs
+ */
+static void wdrtas_unregister_devs(void)
+{
+	misc_deregister(&wdrtas_miscdev);
+	if (wdrtas_token_get_sensor_state != RTAS_UNKNOWN_SERVICE)
+		misc_deregister(&wdrtas_tempdev);
+}
+
+/**
+ * wdrtas_register_devs - registers the misc dev handlers
+ *
+ * returns 0 on success, <0 on failure
+ *
+ * wdrtas_register_devs registers the watchdog and temperature watchdog
+ * misc devs
+ */
+static int wdrtas_register_devs(void)
+{
+	int result;
+
+	result = misc_register(&wdrtas_miscdev);
+	if (result) {
+		pr_err("couldn't register watchdog misc device. Terminating watchdog code.\n");
+		return result;
+	}
+
+	if (wdrtas_token_get_sensor_state != RTAS_UNKNOWN_SERVICE) {
+		result = misc_register(&wdrtas_tempdev);
+		if (result) {
+			pr_warn("couldn't register watchdog temperature misc device. Continuing without temperature support.\n");
+			wdrtas_token_get_sensor_state = RTAS_UNKNOWN_SERVICE;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * wdrtas_init - init function of the watchdog driver
+ *
+ * returns 0 on success, <0 on failure
+ *
+ * registers the file handlers and the reboot notifier
+ */
+static int __init wdrtas_init(void)
+{
+	if (wdrtas_get_tokens())
+		return -ENODEV;
+
+	if (wdrtas_register_devs())
+		return -ENODEV;
+
+	if (register_reboot_notifier(&wdrtas_notifier)) {
+		pr_err("could not register reboot notifier. Terminating watchdog code.\n");
+		wdrtas_unregister_devs();
+		return -ENODEV;
+	}
+
+	if (wdrtas_token_get_sp == RTAS_UNKNOWN_SERVICE)
+		wdrtas_interval = WDRTAS_DEFAULT_INTERVAL;
+	else
+		wdrtas_interval = wdrtas_get_interval(WDRTAS_DEFAULT_INTERVAL);
+
+	return 0;
+}
+
+/**
+ * wdrtas_exit - exit function of the watchdog driver
+ *
+ * unregisters the file handlers and the reboot notifier
+ */
+static void __exit wdrtas_exit(void)
+{
+	if (!wdrtas_nowayout)
+		wdrtas_timer_stop();
+
+	wdrtas_unregister_devs();
+
+	unregister_reboot_notifier(&wdrtas_notifier);
+}
+
+module_init(wdrtas_init);
+module_exit(wdrtas_exit);
diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c
new file mode 100644
index 000000000..e481fbbc4
--- /dev/null
+++ b/drivers/watchdog/wdt.c
@@ -0,0 +1,667 @@
+/*
+ *	Industrial Computer Source WDT501 driver
+ *
+ *	(c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ *	warranty for any of this software. This material is provided
+ *	"AS-IS" and at no charge.
+ *
+ *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ *	Release 0.10.
+ *
+ *	Fixes
+ *		Dave Gregorich	:	Modularisation and minor bugs
+ *		Alan Cox	:	Added the watchdog ioctl() stuff
+ *		Alan Cox	:	Fixed the reboot problem (as noted by
+ *					Matt Crocker).
+ *		Alan Cox	:	Added wdt= boot option
+ *		Alan Cox	:	Cleaned up copy/user stuff
+ *		Tim Hockin	:	Added insmod parameters, comment
+ *					cleanup, parameterized timeout
+ *		Tigran Aivazian	:	Restructured wdt_init() to handle
+ *					failures
+ *		Joel Becker	:	Added WDIOC_GET/SETTIMEOUT
+ *		Matt Domsch	:	Added nowayout module option
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/ioport.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include "wd501p.h"
+
+static unsigned long wdt_is_open;
+static char expect_close;
+
+/*
+ *	Module parameters
+ */
+
+#define WD_TIMO 60			/* Default heartbeat = 60 seconds */
+
+static int heartbeat = WD_TIMO;
+static int wd_heartbeat;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat,
+	"Watchdog heartbeat in seconds. (0 < heartbeat < 65536, default="
+				__MODULE_STRING(WD_TIMO) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+	"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/* You must set these - there is no sane way to probe for this board. */
+static int io = 0x240;
+static int irq = 11;
+
+static DEFINE_SPINLOCK(wdt_lock);
+
+module_param_hw(io, int, ioport, 0);
+MODULE_PARM_DESC(io, "WDT io port (default=0x240)");
+module_param_hw(irq, int, irq, 0);
+MODULE_PARM_DESC(irq, "WDT irq (default=11)");
+
+/* Support for the Fan Tachometer on the WDT501-P */
+static int tachometer;
+module_param(tachometer, int, 0);
+MODULE_PARM_DESC(tachometer,
+		"WDT501-P Fan Tachometer support (0=disable, default=0)");
+
+static int type = 500;
+module_param(type, int, 0);
+MODULE_PARM_DESC(type,
+		"WDT501-P Card type (500 or 501, default=500)");
+
+/*
+ *	Programming support
+ */
+
+static void wdt_ctr_mode(int ctr, int mode)
+{
+	ctr <<= 6;
+	ctr |= 0x30;
+	ctr |= (mode << 1);
+	outb_p(ctr, WDT_CR);
+}
+
+static void wdt_ctr_load(int ctr, int val)
+{
+	outb_p(val&0xFF, WDT_COUNT0+ctr);
+	outb_p(val>>8, WDT_COUNT0+ctr);
+}
+
+/**
+ *	wdt_start:
+ *
+ *	Start the watchdog driver.
+ */
+
+static int wdt_start(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&wdt_lock, flags);
+	inb_p(WDT_DC);			/* Disable watchdog */
+	wdt_ctr_mode(0, 3);		/* Program CTR0 for Mode 3:
+						Square Wave Generator */
+	wdt_ctr_mode(1, 2);		/* Program CTR1 for Mode 2:
+						Rate Generator */
+	wdt_ctr_mode(2, 0);		/* Program CTR2 for Mode 0:
+						Pulse on Terminal Count */
+	wdt_ctr_load(0, 8948);		/* Count at 100Hz */
+	wdt_ctr_load(1, wd_heartbeat);	/* Heartbeat */
+	wdt_ctr_load(2, 65535);		/* Length of reset pulse */
+	outb_p(0, WDT_DC);		/* Enable watchdog */
+	spin_unlock_irqrestore(&wdt_lock, flags);
+	return 0;
+}
+
+/**
+ *	wdt_stop:
+ *
+ *	Stop the watchdog driver.
+ */
+
+static int wdt_stop(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&wdt_lock, flags);
+	/* Turn the card off */
+	inb_p(WDT_DC);			/* Disable watchdog */
+	wdt_ctr_load(2, 0);		/* 0 length reset pulses now */
+	spin_unlock_irqrestore(&wdt_lock, flags);
+	return 0;
+}
+
+/**
+ *	wdt_ping:
+ *
+ *	Reload counter one with the watchdog heartbeat. We don't bother
+ *	reloading the cascade counter.
+ */
+
+static void wdt_ping(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&wdt_lock, flags);
+	/* Write a watchdog value */
+	inb_p(WDT_DC);			/* Disable watchdog */
+	wdt_ctr_mode(1, 2);		/* Re-Program CTR1 for Mode 2:
+							Rate Generator */
+	wdt_ctr_load(1, wd_heartbeat);	/* Heartbeat */
+	outb_p(0, WDT_DC);		/* Enable watchdog */
+	spin_unlock_irqrestore(&wdt_lock, flags);
+}
+
+/**
+ *	wdt_set_heartbeat:
+ *	@t:		the new heartbeat value that needs to be set.
+ *
+ *	Set a new heartbeat value for the watchdog device. If the heartbeat
+ *	value is incorrect we keep the old value and return -EINVAL. If
+ *	successful we return 0.
+ */
+
+static int wdt_set_heartbeat(int t)
+{
+	if (t < 1 || t > 65535)
+		return -EINVAL;
+
+	heartbeat = t;
+	wd_heartbeat = t * 100;
+	return 0;
+}
+
+/**
+ *	wdt_get_status:
+ *
+ *	Extract the status information from a WDT watchdog device. There are
+ *	several board variants so we have to know which bits are valid. Some
+ *	bits default to one and some to zero in order to be maximally painful.
+ *
+ *	we then map the bits onto the status ioctl flags.
+ */
+
+static int wdt_get_status(void)
+{
+	unsigned char new_status;
+	int status = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdt_lock, flags);
+	new_status = inb_p(WDT_SR);
+	spin_unlock_irqrestore(&wdt_lock, flags);
+
+	if (new_status & WDC_SR_ISOI0)
+		status |= WDIOF_EXTERN1;
+	if (new_status & WDC_SR_ISII1)
+		status |= WDIOF_EXTERN2;
+	if (type == 501) {
+		if (!(new_status & WDC_SR_TGOOD))
+			status |= WDIOF_OVERHEAT;
+		if (!(new_status & WDC_SR_PSUOVER))
+			status |= WDIOF_POWEROVER;
+		if (!(new_status & WDC_SR_PSUUNDR))
+			status |= WDIOF_POWERUNDER;
+		if (tachometer) {
+			if (!(new_status & WDC_SR_FANGOOD))
+				status |= WDIOF_FANFAULT;
+		}
+	}
+	return status;
+}
+
+/**
+ *	wdt_get_temperature:
+ *
+ *	Reports the temperature in degrees Fahrenheit. The API is in
+ *	farenheit. It was designed by an imperial measurement luddite.
+ */
+
+static int wdt_get_temperature(void)
+{
+	unsigned short c;
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdt_lock, flags);
+	c = inb_p(WDT_RT);
+	spin_unlock_irqrestore(&wdt_lock, flags);
+	return (c * 11 / 15) + 7;
+}
+
+static void wdt_decode_501(int status)
+{
+	if (!(status & WDC_SR_TGOOD))
+		pr_crit("Overheat alarm (%d)\n", inb_p(WDT_RT));
+	if (!(status & WDC_SR_PSUOVER))
+		pr_crit("PSU over voltage\n");
+	if (!(status & WDC_SR_PSUUNDR))
+		pr_crit("PSU under voltage\n");
+}
+
+/**
+ *	wdt_interrupt:
+ *	@irq:		Interrupt number
+ *	@dev_id:	Unused as we don't allow multiple devices.
+ *
+ *	Handle an interrupt from the board. These are raised when the status
+ *	map changes in what the board considers an interesting way. That means
+ *	a failure condition occurring.
+ */
+
+static irqreturn_t wdt_interrupt(int irq, void *dev_id)
+{
+	/*
+	 *	Read the status register see what is up and
+	 *	then printk it.
+	 */
+	unsigned char status;
+
+	spin_lock(&wdt_lock);
+	status = inb_p(WDT_SR);
+
+	pr_crit("WDT status %d\n", status);
+
+	if (type == 501) {
+		wdt_decode_501(status);
+		if (tachometer) {
+			if (!(status & WDC_SR_FANGOOD))
+				pr_crit("Possible fan fault\n");
+		}
+	}
+	if (!(status & WDC_SR_WCCR)) {
+#ifdef SOFTWARE_REBOOT
+#ifdef ONLY_TESTING
+		pr_crit("Would Reboot\n");
+#else
+		pr_crit("Initiating system reboot\n");
+		emergency_restart();
+#endif
+#else
+		pr_crit("Reset in 5ms\n");
+#endif
+	}
+	spin_unlock(&wdt_lock);
+	return IRQ_HANDLED;
+}
+
+
+/**
+ *	wdt_write:
+ *	@file: file handle to the watchdog
+ *	@buf: buffer to write (unused as data does not matter here
+ *	@count: count of bytes
+ *	@ppos: pointer to the position to write. No seeks allowed
+ *
+ *	A write to a watchdog device is defined as a keepalive signal. Any
+ *	write of data will do, as we we don't define content meaning.
+ */
+
+static ssize_t wdt_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
+{
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			expect_close = 0;
+
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+		wdt_ping();
+	}
+	return count;
+}
+
+/**
+ *	wdt_ioctl:
+ *	@file: file handle to the device
+ *	@cmd: watchdog command
+ *	@arg: argument pointer
+ *
+ *	The watchdog API defines a common set of functions for all watchdogs
+ *	according to their available features. We only actually usefully support
+ *	querying capabilities and current status.
+ */
+
+static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int new_heartbeat;
+	int status;
+
+	struct watchdog_info ident = {
+		.options =		WDIOF_SETTIMEOUT|
+					WDIOF_MAGICCLOSE|
+					WDIOF_KEEPALIVEPING,
+		.firmware_version =	1,
+		.identity =		"WDT500/501",
+	};
+
+	/* Add options according to the card we have */
+	ident.options |= (WDIOF_EXTERN1|WDIOF_EXTERN2);
+	if (type == 501) {
+		ident.options |= (WDIOF_OVERHEAT|WDIOF_POWERUNDER|
+							WDIOF_POWEROVER);
+		if (tachometer)
+			ident.options |= WDIOF_FANFAULT;
+	}
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+		status = wdt_get_status();
+		return put_user(status, p);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		wdt_ping();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_heartbeat, p))
+			return -EFAULT;
+		if (wdt_set_heartbeat(new_heartbeat))
+			return -EINVAL;
+		wdt_ping();
+		/* Fall */
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+	default:
+		return -ENOTTY;
+	}
+}
+
+/**
+ *	wdt_open:
+ *	@inode: inode of device
+ *	@file: file handle to device
+ *
+ *	The watchdog device has been opened. The watchdog device is single
+ *	open and on opening we load the counters. Counter zero is a 100Hz
+ *	cascade, into counter 1 which downcounts to reboot. When the counter
+ *	triggers counter 2 downcounts the length of the reset pulse which
+ *	set set to be as long as possible.
+ */
+
+static int wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &wdt_is_open))
+		return -EBUSY;
+	/*
+	 *	Activate
+	 */
+	wdt_start();
+	return nonseekable_open(inode, file);
+}
+
+/**
+ *	wdt_release:
+ *	@inode: inode to board
+ *	@file: file handle to board
+ *
+ *	The watchdog has a configurable API. There is a religious dispute
+ *	between people who want their watchdog to be able to shut down and
+ *	those who want to be sure if the watchdog manager dies the machine
+ *	reboots. In the former case we disable the counters, in the latter
+ *	case you have to open it again very soon.
+ */
+
+static int wdt_release(struct inode *inode, struct file *file)
+{
+	if (expect_close == 42) {
+		wdt_stop();
+		clear_bit(0, &wdt_is_open);
+	} else {
+		pr_crit("WDT device closed unexpectedly.  WDT will not stop!\n");
+		wdt_ping();
+	}
+	expect_close = 0;
+	return 0;
+}
+
+/**
+ *	wdt_temp_read:
+ *	@file: file handle to the watchdog board
+ *	@buf: buffer to write 1 byte into
+ *	@count: length of buffer
+ *	@ptr: offset (no seek allowed)
+ *
+ *	Temp_read reports the temperature in degrees Fahrenheit. The API is in
+ *	farenheit. It was designed by an imperial measurement luddite.
+ */
+
+static ssize_t wdt_temp_read(struct file *file, char __user *buf,
+						size_t count, loff_t *ptr)
+{
+	int temperature = wdt_get_temperature();
+
+	if (copy_to_user(buf, &temperature, 1))
+		return -EFAULT;
+
+	return 1;
+}
+
+/**
+ *	wdt_temp_open:
+ *	@inode: inode of device
+ *	@file: file handle to device
+ *
+ *	The temperature device has been opened.
+ */
+
+static int wdt_temp_open(struct inode *inode, struct file *file)
+{
+	return nonseekable_open(inode, file);
+}
+
+/**
+ *	wdt_temp_release:
+ *	@inode: inode to board
+ *	@file: file handle to board
+ *
+ *	The temperature device has been closed.
+ */
+
+static int wdt_temp_release(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+/**
+ *	notify_sys:
+ *	@this: our notifier block
+ *	@code: the event being reported
+ *	@unused: unused
+ *
+ *	Our notifier is called on system shutdowns. We want to turn the card
+ *	off at reboot otherwise the machine will reboot again during memory
+ *	test or worse yet during the following fsck. This would suck, in fact
+ *	trust me - if it happens it does suck.
+ */
+
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
+	void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		wdt_stop();
+	return NOTIFY_DONE;
+}
+
+/*
+ *	Kernel Interfaces
+ */
+
+
+static const struct file_operations wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= wdt_write,
+	.unlocked_ioctl	= wdt_ioctl,
+	.open		= wdt_open,
+	.release	= wdt_release,
+};
+
+static struct miscdevice wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &wdt_fops,
+};
+
+static const struct file_operations wdt_temp_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.read		= wdt_temp_read,
+	.open		= wdt_temp_open,
+	.release	= wdt_temp_release,
+};
+
+static struct miscdevice temp_miscdev = {
+	.minor	= TEMP_MINOR,
+	.name	= "temperature",
+	.fops	= &wdt_temp_fops,
+};
+
+/*
+ *	The WDT card needs to learn about soft shutdowns in order to
+ *	turn the timebomb registers off.
+ */
+
+static struct notifier_block wdt_notifier = {
+	.notifier_call = wdt_notify_sys,
+};
+
+/**
+ *	cleanup_module:
+ *
+ *	Unload the watchdog. You cannot do this with any file handles open.
+ *	If your watchdog is set to continue ticking on close and you unload
+ *	it, well it keeps ticking. We won't get the interrupt but the board
+ *	will not touch PC memory so all is fine. You just have to load a new
+ *	module in 60 seconds or reboot.
+ */
+
+static void __exit wdt_exit(void)
+{
+	misc_deregister(&wdt_miscdev);
+	if (type == 501)
+		misc_deregister(&temp_miscdev);
+	unregister_reboot_notifier(&wdt_notifier);
+	free_irq(irq, NULL);
+	release_region(io, 8);
+}
+
+/**
+ *	wdt_init:
+ *
+ *	Set up the WDT watchdog board. All we have to do is grab the
+ *	resources we require and bitch if anyone beat us to them.
+ *	The open() function will actually kick the board off.
+ */
+
+static int __init wdt_init(void)
+{
+	int ret;
+
+	if (type != 500 && type != 501) {
+		pr_err("unknown card type '%d'\n", type);
+		return -ENODEV;
+	}
+
+	/* Check that the heartbeat value is within it's range;
+	   if not reset to the default */
+	if (wdt_set_heartbeat(heartbeat)) {
+		wdt_set_heartbeat(WD_TIMO);
+		pr_info("heartbeat value must be 0 < heartbeat < 65536, using %d\n",
+			WD_TIMO);
+	}
+
+	if (!request_region(io, 8, "wdt501p")) {
+		pr_err("I/O address 0x%04x already in use\n", io);
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ret = request_irq(irq, wdt_interrupt, 0, "wdt501p", NULL);
+	if (ret) {
+		pr_err("IRQ %d is not free\n", irq);
+		goto outreg;
+	}
+
+	ret = register_reboot_notifier(&wdt_notifier);
+	if (ret) {
+		pr_err("cannot register reboot notifier (err=%d)\n", ret);
+		goto outirq;
+	}
+
+	if (type == 501) {
+		ret = misc_register(&temp_miscdev);
+		if (ret) {
+			pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+			       TEMP_MINOR, ret);
+			goto outrbt;
+		}
+	}
+
+	ret = misc_register(&wdt_miscdev);
+	if (ret) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, ret);
+		goto outmisc;
+	}
+
+	pr_info("WDT500/501-P driver 0.10 at 0x%04x (Interrupt %d). heartbeat=%d sec (nowayout=%d)\n",
+		io, irq, heartbeat, nowayout);
+	if (type == 501)
+		pr_info("Fan Tachometer is %s\n",
+			tachometer ? "Enabled" : "Disabled");
+	return 0;
+
+outmisc:
+	if (type == 501)
+		misc_deregister(&temp_miscdev);
+outrbt:
+	unregister_reboot_notifier(&wdt_notifier);
+outirq:
+	free_irq(irq, NULL);
+outreg:
+	release_region(io, 8);
+out:
+	return ret;
+}
+
+module_init(wdt_init);
+module_exit(wdt_exit);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("Driver for ISA ICS watchdog cards (WDT500/501)");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/wdt285.c b/drivers/watchdog/wdt285.c
new file mode 100644
index 000000000..ebbb183be
--- /dev/null
+++ b/drivers/watchdog/wdt285.c
@@ -0,0 +1,231 @@
+/*
+ *	Intel 21285 watchdog driver
+ *	Copyright (c) Phil Blundell <pb@nexus.co.uk>, 1998
+ *
+ *	based on
+ *
+ *	SoftDog	0.05:	A Software Watchdog Device
+ *
+ *	(c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include <linux/irq.h>
+#include <mach/hardware.h>
+
+#include <asm/mach-types.h>
+#include <asm/system_info.h>
+#include <asm/hardware/dec21285.h>
+
+/*
+ * Define this to stop the watchdog actually rebooting the machine.
+ */
+#undef ONLY_TESTING
+
+static unsigned int soft_margin = 60;		/* in seconds */
+static unsigned int reload;
+static unsigned long timer_alive;
+
+#ifdef ONLY_TESTING
+/*
+ *	If the timer expires..
+ */
+static void watchdog_fire(int irq, void *dev_id)
+{
+	pr_crit("Would Reboot\n");
+	*CSR_TIMER4_CNTL = 0;
+	*CSR_TIMER4_CLR = 0;
+}
+#endif
+
+/*
+ *	Refresh the timer.
+ */
+static void watchdog_ping(void)
+{
+	*CSR_TIMER4_LOAD = reload;
+}
+
+/*
+ *	Allow only one person to hold it open
+ */
+static int watchdog_open(struct inode *inode, struct file *file)
+{
+	int ret;
+
+	if (*CSR_SA110_CNTL & (1 << 13))
+		return -EBUSY;
+
+	if (test_and_set_bit(1, &timer_alive))
+		return -EBUSY;
+
+	reload = soft_margin * (mem_fclk_21285 / 256);
+
+	*CSR_TIMER4_CLR = 0;
+	watchdog_ping();
+	*CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD
+		| TIMER_CNTL_DIV256;
+
+#ifdef ONLY_TESTING
+	ret = request_irq(IRQ_TIMER4, watchdog_fire, 0, "watchdog", NULL);
+	if (ret) {
+		*CSR_TIMER4_CNTL = 0;
+		clear_bit(1, &timer_alive);
+	}
+#else
+	/*
+	 * Setting this bit is irreversible; once enabled, there is
+	 * no way to disable the watchdog.
+	 */
+	*CSR_SA110_CNTL |= 1 << 13;
+
+	ret = 0;
+#endif
+	nonseekable_open(inode, file);
+	return ret;
+}
+
+/*
+ *	Shut off the timer.
+ *	Note: if we really have enabled the watchdog, there
+ *	is no way to turn off.
+ */
+static int watchdog_release(struct inode *inode, struct file *file)
+{
+#ifdef ONLY_TESTING
+	free_irq(IRQ_TIMER4, NULL);
+	clear_bit(1, &timer_alive);
+#endif
+	return 0;
+}
+
+static ssize_t watchdog_write(struct file *file, const char __user *data,
+			      size_t len, loff_t *ppos)
+{
+	/*
+	 *	Refresh the timer.
+	 */
+	if (len)
+		watchdog_ping();
+
+	return len;
+}
+
+static const struct watchdog_info ident = {
+	.options	= WDIOF_SETTIMEOUT,
+	.identity	= "Footbridge Watchdog",
+};
+
+static long watchdog_ioctl(struct file *file, unsigned int cmd,
+			   unsigned long arg)
+{
+	int __user *int_arg = (int __user *)arg;
+	int new_margin, ret = -ENOTTY;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		ret = 0;
+		if (copy_to_user((void __user *)arg, &ident, sizeof(ident)))
+			ret = -EFAULT;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		ret = put_user(0, int_arg);
+		break;
+
+	case WDIOC_KEEPALIVE:
+		watchdog_ping();
+		ret = 0;
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		ret = get_user(new_margin, int_arg);
+		if (ret)
+			break;
+
+		/* Arbitrary, can't find the card's limits */
+		if (new_margin < 0 || new_margin > 60) {
+			ret = -EINVAL;
+			break;
+		}
+
+		soft_margin = new_margin;
+		reload = soft_margin * (mem_fclk_21285 / 256);
+		watchdog_ping();
+		/* Fall */
+	case WDIOC_GETTIMEOUT:
+		ret = put_user(soft_margin, int_arg);
+		break;
+	}
+	return ret;
+}
+
+static const struct file_operations watchdog_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= watchdog_write,
+	.unlocked_ioctl	= watchdog_ioctl,
+	.open		= watchdog_open,
+	.release	= watchdog_release,
+};
+
+static struct miscdevice watchdog_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &watchdog_fops,
+};
+
+static int __init footbridge_watchdog_init(void)
+{
+	int retval;
+
+	if (machine_is_netwinder())
+		return -ENODEV;
+
+	retval = misc_register(&watchdog_miscdev);
+	if (retval < 0)
+		return retval;
+
+	pr_info("Footbridge Watchdog Timer: 0.01, timer margin: %d sec\n",
+		soft_margin);
+
+	if (machine_is_cats())
+		pr_warn("Warning: Watchdog reset may not work on this machine\n");
+	return 0;
+}
+
+static void __exit footbridge_watchdog_exit(void)
+{
+	misc_deregister(&watchdog_miscdev);
+}
+
+MODULE_AUTHOR("Phil Blundell <pb@nexus.co.uk>");
+MODULE_DESCRIPTION("Footbridge watchdog driver");
+MODULE_LICENSE("GPL");
+
+module_param(soft_margin, int, 0);
+MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds");
+
+module_init(footbridge_watchdog_init);
+module_exit(footbridge_watchdog_exit);
diff --git a/drivers/watchdog/wdt977.c b/drivers/watchdog/wdt977.c
new file mode 100644
index 000000000..a8e6f87f6
--- /dev/null
+++ b/drivers/watchdog/wdt977.c
@@ -0,0 +1,509 @@
+/*
+ *	Wdt977	0.04:	A Watchdog Device for Netwinder W83977AF chip
+ *
+ *	(c) Copyright 1998 Rebel.com (Woody Suwalski <woody@netwinder.org>)
+ *
+ *			-----------------------
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *			-----------------------
+ *      14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
+ *           Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
+ *	19-Dec-2001 Woody Suwalski: Netwinder fixes, ioctl interface
+ *	06-Jan-2002 Woody Suwalski: For compatibility, convert all timeouts
+ *				    from minutes to seconds.
+ *      07-Jul-2003 Daniele Bellucci: Audit return code of misc_register in
+ *                                    nwwatchdog_init.
+ *      25-Oct-2005 Woody Suwalski: Convert addresses to #defs, add spinlocks
+ *				    remove limitiation to be used on
+ *				    Netwinders only
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/watchdog.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <asm/mach-types.h>
+
+#define WATCHDOG_VERSION  "0.04"
+#define WATCHDOG_NAME     "Wdt977"
+
+#define IO_INDEX_PORT	0x370		/* on some systems it can be 0x3F0 */
+#define IO_DATA_PORT	(IO_INDEX_PORT + 1)
+
+#define UNLOCK_DATA	0x87
+#define LOCK_DATA	0xAA
+#define DEVICE_REGISTER	0x07
+
+
+#define	DEFAULT_TIMEOUT	60			/* default timeout in seconds */
+
+static	int timeout = DEFAULT_TIMEOUT;
+static	int timeoutM;				/* timeout in minutes */
+static	unsigned long timer_alive;
+static	int testmode;
+static	char expect_close;
+static	DEFINE_SPINLOCK(spinlock);
+
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (60..15300, default="
+				__MODULE_STRING(DEFAULT_TIMEOUT) ")");
+module_param(testmode, int, 0);
+MODULE_PARM_DESC(testmode, "Watchdog testmode (1 = no reboot), default=0");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/*
+ * Start the watchdog
+ */
+
+static int wdt977_start(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&spinlock, flags);
+
+	/* unlock the SuperIO chip */
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+
+	/* select device Aux2 (device=8) and set watchdog regs F2, F3 and F4
+	 * F2 has the timeout in minutes
+	 * F3 could be set to the POWER LED blink (with GP17 set to PowerLed)
+	 *   at timeout, and to reset timer on kbd/mouse activity (not impl.)
+	 * F4 is used to just clear the TIMEOUT'ed state (bit 0)
+	 */
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF2, IO_INDEX_PORT);
+	outb_p(timeoutM, IO_DATA_PORT);
+	outb_p(0xF3, IO_INDEX_PORT);
+	outb_p(0x00, IO_DATA_PORT);	/* another setting is 0E for
+					   kbd/mouse/LED */
+	outb_p(0xF4, IO_INDEX_PORT);
+	outb_p(0x00, IO_DATA_PORT);
+
+	/* At last select device Aux1 (dev=7) and set GP16 as a
+	 * watchdog output. In test mode watch the bit 1 on F4 to
+	 * indicate "triggered"
+	 */
+	if (!testmode) {
+		outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+		outb_p(0x07, IO_DATA_PORT);
+		outb_p(0xE6, IO_INDEX_PORT);
+		outb_p(0x08, IO_DATA_PORT);
+	}
+
+	/* lock the SuperIO chip */
+	outb_p(LOCK_DATA, IO_INDEX_PORT);
+
+	spin_unlock_irqrestore(&spinlock, flags);
+	pr_info("activated\n");
+
+	return 0;
+}
+
+/*
+ * Stop the watchdog
+ */
+
+static int wdt977_stop(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&spinlock, flags);
+
+	/* unlock the SuperIO chip */
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+
+	/* select device Aux2 (device=8) and set watchdog regs F2,F3 and F4
+	* F3 is reset to its default state
+	* F4 can clear the TIMEOUT'ed state (bit 0) - back to default
+	* We can not use GP17 as a PowerLed, as we use its usage as a RedLed
+	*/
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF2, IO_INDEX_PORT);
+	outb_p(0xFF, IO_DATA_PORT);
+	outb_p(0xF3, IO_INDEX_PORT);
+	outb_p(0x00, IO_DATA_PORT);
+	outb_p(0xF4, IO_INDEX_PORT);
+	outb_p(0x00, IO_DATA_PORT);
+	outb_p(0xF2, IO_INDEX_PORT);
+	outb_p(0x00, IO_DATA_PORT);
+
+	/* at last select device Aux1 (dev=7) and set
+	   GP16 as a watchdog output */
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x07, IO_DATA_PORT);
+	outb_p(0xE6, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+
+	/* lock the SuperIO chip */
+	outb_p(LOCK_DATA, IO_INDEX_PORT);
+
+	spin_unlock_irqrestore(&spinlock, flags);
+	pr_info("shutdown\n");
+
+	return 0;
+}
+
+/*
+ * Send a keepalive ping to the watchdog
+ * This is done by simply re-writing the timeout to reg. 0xF2
+ */
+
+static int wdt977_keepalive(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&spinlock, flags);
+
+	/* unlock the SuperIO chip */
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+
+	/* select device Aux2 (device=8) and kicks watchdog reg F2 */
+	/* F2 has the timeout in minutes */
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF2, IO_INDEX_PORT);
+	outb_p(timeoutM, IO_DATA_PORT);
+
+	/* lock the SuperIO chip */
+	outb_p(LOCK_DATA, IO_INDEX_PORT);
+	spin_unlock_irqrestore(&spinlock, flags);
+
+	return 0;
+}
+
+/*
+ * Set the watchdog timeout value
+ */
+
+static int wdt977_set_timeout(int t)
+{
+	int tmrval;
+
+	/* convert seconds to minutes, rounding up */
+	tmrval = (t + 59) / 60;
+
+	if (machine_is_netwinder()) {
+		/* we have a hw bug somewhere, so each 977 minute is actually
+		 * only 30sec. This limits the max timeout to half of device
+		 * max of 255 minutes...
+		 */
+		tmrval += tmrval;
+	}
+
+	if (tmrval < 1 || tmrval > 255)
+		return -EINVAL;
+
+	/* timeout is the timeout in seconds, timeoutM is
+	   the timeout in minutes) */
+	timeout = t;
+	timeoutM = tmrval;
+	return 0;
+}
+
+/*
+ * Get the watchdog status
+ */
+
+static int wdt977_get_status(int *status)
+{
+	int new_status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&spinlock, flags);
+
+	/* unlock the SuperIO chip */
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+	outb_p(UNLOCK_DATA, IO_INDEX_PORT);
+
+	/* select device Aux2 (device=8) and read watchdog reg F4 */
+	outb_p(DEVICE_REGISTER, IO_INDEX_PORT);
+	outb_p(0x08, IO_DATA_PORT);
+	outb_p(0xF4, IO_INDEX_PORT);
+	new_status = inb_p(IO_DATA_PORT);
+
+	/* lock the SuperIO chip */
+	outb_p(LOCK_DATA, IO_INDEX_PORT);
+
+	spin_unlock_irqrestore(&spinlock, flags);
+
+	*status = 0;
+	if (new_status & 1)
+		*status |= WDIOF_CARDRESET;
+
+	return 0;
+}
+
+
+/*
+ *	/dev/watchdog handling
+ */
+
+static int wdt977_open(struct inode *inode, struct file *file)
+{
+	/* If the watchdog is alive we don't need to start it again */
+	if (test_and_set_bit(0, &timer_alive))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	wdt977_start();
+	return nonseekable_open(inode, file);
+}
+
+static int wdt977_release(struct inode *inode, struct file *file)
+{
+	/*
+	 *	Shut off the timer.
+	 *	Lock it in if it's a module and we set nowayout
+	 */
+	if (expect_close == 42) {
+		wdt977_stop();
+		clear_bit(0, &timer_alive);
+	} else {
+		wdt977_keepalive();
+		pr_crit("Unexpected close, not stopping watchdog!\n");
+	}
+	expect_close = 0;
+	return 0;
+}
+
+
+/*
+ *      wdt977_write:
+ *      @file: file handle to the watchdog
+ *      @buf: buffer to write (unused as data does not matter here
+ *      @count: count of bytes
+ *      @ppos: pointer to the position to write. No seeks allowed
+ *
+ *      A write to a watchdog device is defined as a keepalive signal. Any
+ *      write of data will do, as we we don't define content meaning.
+ */
+
+static ssize_t wdt977_write(struct file *file, const char __user *buf,
+			    size_t count, loff_t *ppos)
+{
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			expect_close = 0;
+
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+
+		/* someone wrote to us, we should restart timer */
+		wdt977_keepalive();
+	}
+	return count;
+}
+
+static const struct watchdog_info ident = {
+	.options =		WDIOF_SETTIMEOUT |
+				WDIOF_MAGICCLOSE |
+				WDIOF_KEEPALIVEPING,
+	.firmware_version =	1,
+	.identity =		WATCHDOG_NAME,
+};
+
+/*
+ *      wdt977_ioctl:
+ *      @inode: inode of the device
+ *      @file: file handle to the device
+ *      @cmd: watchdog command
+ *      @arg: argument pointer
+ *
+ *      The watchdog API defines a common set of functions for all watchdogs
+ *      according to their available features.
+ */
+
+static long wdt977_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	int status;
+	int new_options, retval = -EINVAL;
+	int new_timeout;
+	union {
+		struct watchdog_info __user *ident;
+		int __user *i;
+	} uarg;
+
+	uarg.i = (int __user *)arg;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(uarg.ident, &ident,
+			sizeof(ident)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+		wdt977_get_status(&status);
+		return put_user(status, uarg.i);
+
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, uarg.i);
+
+	case WDIOC_SETOPTIONS:
+		if (get_user(new_options, uarg.i))
+			return -EFAULT;
+
+		if (new_options & WDIOS_DISABLECARD) {
+			wdt977_stop();
+			retval = 0;
+		}
+
+		if (new_options & WDIOS_ENABLECARD) {
+			wdt977_start();
+			retval = 0;
+		}
+
+		return retval;
+
+	case WDIOC_KEEPALIVE:
+		wdt977_keepalive();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_timeout, uarg.i))
+			return -EFAULT;
+
+		if (wdt977_set_timeout(new_timeout))
+			return -EINVAL;
+
+		wdt977_keepalive();
+		/* Fall */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(timeout, uarg.i);
+
+	default:
+		return -ENOTTY;
+
+	}
+}
+
+static int wdt977_notify_sys(struct notifier_block *this, unsigned long code,
+	void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		wdt977_stop();
+	return NOTIFY_DONE;
+}
+
+static const struct file_operations wdt977_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= wdt977_write,
+	.unlocked_ioctl	= wdt977_ioctl,
+	.open		= wdt977_open,
+	.release	= wdt977_release,
+};
+
+static struct miscdevice wdt977_miscdev = {
+	.minor		= WATCHDOG_MINOR,
+	.name		= "watchdog",
+	.fops		= &wdt977_fops,
+};
+
+static struct notifier_block wdt977_notifier = {
+	.notifier_call = wdt977_notify_sys,
+};
+
+static int __init wd977_init(void)
+{
+	int rc;
+
+	pr_info("driver v%s\n", WATCHDOG_VERSION);
+
+	/* Check that the timeout value is within its range;
+	   if not reset to the default */
+	if (wdt977_set_timeout(timeout)) {
+		wdt977_set_timeout(DEFAULT_TIMEOUT);
+		pr_info("timeout value must be 60 < timeout < 15300, using %d\n",
+			DEFAULT_TIMEOUT);
+	}
+
+	/* on Netwinder the IOports are already reserved by
+	 * arch/arm/mach-footbridge/netwinder-hw.c
+	 */
+	if (!machine_is_netwinder()) {
+		if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME)) {
+			pr_err("I/O address 0x%04x already in use\n",
+			       IO_INDEX_PORT);
+			rc = -EIO;
+			goto err_out;
+		}
+	}
+
+	rc = register_reboot_notifier(&wdt977_notifier);
+	if (rc) {
+		pr_err("cannot register reboot notifier (err=%d)\n", rc);
+		goto err_out_region;
+	}
+
+	rc = misc_register(&wdt977_miscdev);
+	if (rc) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       wdt977_miscdev.minor, rc);
+		goto err_out_reboot;
+	}
+
+	pr_info("initialized. timeout=%d sec (nowayout=%d, testmode=%i)\n",
+		timeout, nowayout, testmode);
+
+	return 0;
+
+err_out_reboot:
+	unregister_reboot_notifier(&wdt977_notifier);
+err_out_region:
+	if (!machine_is_netwinder())
+		release_region(IO_INDEX_PORT, 2);
+err_out:
+	return rc;
+}
+
+static void __exit wd977_exit(void)
+{
+	wdt977_stop();
+	misc_deregister(&wdt977_miscdev);
+	unregister_reboot_notifier(&wdt977_notifier);
+	release_region(IO_INDEX_PORT, 2);
+}
+
+module_init(wd977_init);
+module_exit(wd977_exit);
+
+MODULE_AUTHOR("Woody Suwalski <woodys@xandros.com>");
+MODULE_DESCRIPTION("W83977AF Watchdog driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c
new file mode 100644
index 000000000..10e2cda0e
--- /dev/null
+++ b/drivers/watchdog/wdt_pci.c
@@ -0,0 +1,745 @@
+/*
+ *	Industrial Computer Source PCI-WDT500/501 driver
+ *
+ *	(c) Copyright 1996-1997 Alan Cox <alan@lxorguk.ukuu.org.uk>,
+ *						All Rights Reserved.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *	Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ *	warranty for any of this software. This material is provided
+ *	"AS-IS" and at no charge.
+ *
+ *	(c) Copyright 1995    Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ *	Release 0.10.
+ *
+ *	Fixes
+ *		Dave Gregorich	:	Modularisation and minor bugs
+ *		Alan Cox	:	Added the watchdog ioctl() stuff
+ *		Alan Cox	:	Fixed the reboot problem (as noted by
+ *					Matt Crocker).
+ *		Alan Cox	:	Added wdt= boot option
+ *		Alan Cox	:	Cleaned up copy/user stuff
+ *		Tim Hockin	:	Added insmod parameters, comment cleanup
+ *					Parameterized timeout
+ *		JP Nollmann	:	Added support for PCI wdt501p
+ *		Alan Cox	:	Split ISA and PCI cards into two drivers
+ *		Jeff Garzik	:	PCI cleanups
+ *		Tigran Aivazian	:	Restructured wdtpci_init_one() to handle
+ *					failures
+ *		Joel Becker	:	Added WDIOC_GET/SETTIMEOUT
+ *		Zwane Mwaikambo	:	Magic char closing, locking changes,
+ *					cleanups
+ *		Matt Domsch	:	nowayout module option
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/fs.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+
+#define WDT_IS_PCI
+#include "wd501p.h"
+
+/* We can only use 1 card due to the /dev/watchdog restriction */
+static int dev_count;
+
+static unsigned long open_lock;
+static DEFINE_SPINLOCK(wdtpci_lock);
+static char expect_close;
+
+static resource_size_t io;
+static int irq;
+
+/* Default timeout */
+#define WD_TIMO 60			/* Default heartbeat = 60 seconds */
+
+static int heartbeat = WD_TIMO;
+static int wd_heartbeat;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat,
+		"Watchdog heartbeat in seconds. (0<heartbeat<65536, default="
+				__MODULE_STRING(WD_TIMO) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		"Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/* Support for the Fan Tachometer on the PCI-WDT501 */
+static int tachometer;
+module_param(tachometer, int, 0);
+MODULE_PARM_DESC(tachometer,
+		"PCI-WDT501 Fan Tachometer support (0=disable, default=0)");
+
+static int type = 500;
+module_param(type, int, 0);
+MODULE_PARM_DESC(type,
+		"PCI-WDT501 Card type (500 or 501 , default=500)");
+
+/*
+ *	Programming support
+ */
+
+static void wdtpci_ctr_mode(int ctr, int mode)
+{
+	ctr <<= 6;
+	ctr |= 0x30;
+	ctr |= (mode << 1);
+	outb(ctr, WDT_CR);
+	udelay(8);
+}
+
+static void wdtpci_ctr_load(int ctr, int val)
+{
+	outb(val & 0xFF, WDT_COUNT0 + ctr);
+	udelay(8);
+	outb(val >> 8, WDT_COUNT0 + ctr);
+	udelay(8);
+}
+
+/**
+ *	wdtpci_start:
+ *
+ *	Start the watchdog driver.
+ */
+
+static int wdtpci_start(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdtpci_lock, flags);
+
+	/*
+	 * "pet" the watchdog, as Access says.
+	 * This resets the clock outputs.
+	 */
+	inb(WDT_DC);			/* Disable watchdog */
+	udelay(8);
+	wdtpci_ctr_mode(2, 0);		/* Program CTR2 for Mode 0:
+						Pulse on Terminal Count */
+	outb(0, WDT_DC);		/* Enable watchdog */
+	udelay(8);
+	inb(WDT_DC);			/* Disable watchdog */
+	udelay(8);
+	outb(0, WDT_CLOCK);		/* 2.0833MHz clock */
+	udelay(8);
+	inb(WDT_BUZZER);		/* disable */
+	udelay(8);
+	inb(WDT_OPTONOTRST);		/* disable */
+	udelay(8);
+	inb(WDT_OPTORST);		/* disable */
+	udelay(8);
+	inb(WDT_PROGOUT);		/* disable */
+	udelay(8);
+	wdtpci_ctr_mode(0, 3);		/* Program CTR0 for Mode 3:
+						Square Wave Generator */
+	wdtpci_ctr_mode(1, 2);		/* Program CTR1 for Mode 2:
+						Rate Generator */
+	wdtpci_ctr_mode(2, 1);		/* Program CTR2 for Mode 1:
+						Retriggerable One-Shot */
+	wdtpci_ctr_load(0, 20833);	/* count at 100Hz */
+	wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */
+	/* DO NOT LOAD CTR2 on PCI card! -- JPN */
+	outb(0, WDT_DC);		/* Enable watchdog */
+	udelay(8);
+
+	spin_unlock_irqrestore(&wdtpci_lock, flags);
+	return 0;
+}
+
+/**
+ *	wdtpci_stop:
+ *
+ *	Stop the watchdog driver.
+ */
+
+static int wdtpci_stop(void)
+{
+	unsigned long flags;
+
+	/* Turn the card off */
+	spin_lock_irqsave(&wdtpci_lock, flags);
+	inb(WDT_DC);			/* Disable watchdog */
+	udelay(8);
+	wdtpci_ctr_load(2, 0);		/* 0 length reset pulses now */
+	spin_unlock_irqrestore(&wdtpci_lock, flags);
+	return 0;
+}
+
+/**
+ *	wdtpci_ping:
+ *
+ *	Reload counter one with the watchdog heartbeat. We don't bother
+ *	reloading the cascade counter.
+ */
+
+static int wdtpci_ping(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdtpci_lock, flags);
+	/* Write a watchdog value */
+	inb(WDT_DC);			/* Disable watchdog */
+	udelay(8);
+	wdtpci_ctr_mode(1, 2);		/* Re-Program CTR1 for Mode 2:
+							Rate Generator */
+	wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */
+	outb(0, WDT_DC);		/* Enable watchdog */
+	udelay(8);
+	spin_unlock_irqrestore(&wdtpci_lock, flags);
+	return 0;
+}
+
+/**
+ *	wdtpci_set_heartbeat:
+ *	@t:		the new heartbeat value that needs to be set.
+ *
+ *	Set a new heartbeat value for the watchdog device. If the heartbeat
+ *	value is incorrect we keep the old value and return -EINVAL.
+ *	If successful we return 0.
+ */
+static int wdtpci_set_heartbeat(int t)
+{
+	/* Arbitrary, can't find the card's limits */
+	if (t < 1 || t > 65535)
+		return -EINVAL;
+
+	heartbeat = t;
+	wd_heartbeat = t * 100;
+	return 0;
+}
+
+/**
+ *	wdtpci_get_status:
+ *	@status:		the new status.
+ *
+ *	Extract the status information from a WDT watchdog device. There are
+ *	several board variants so we have to know which bits are valid. Some
+ *	bits default to one and some to zero in order to be maximally painful.
+ *
+ *	we then map the bits onto the status ioctl flags.
+ */
+
+static int wdtpci_get_status(int *status)
+{
+	unsigned char new_status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdtpci_lock, flags);
+	new_status = inb(WDT_SR);
+	spin_unlock_irqrestore(&wdtpci_lock, flags);
+
+	*status = 0;
+	if (new_status & WDC_SR_ISOI0)
+		*status |= WDIOF_EXTERN1;
+	if (new_status & WDC_SR_ISII1)
+		*status |= WDIOF_EXTERN2;
+	if (type == 501) {
+		if (!(new_status & WDC_SR_TGOOD))
+			*status |= WDIOF_OVERHEAT;
+		if (!(new_status & WDC_SR_PSUOVER))
+			*status |= WDIOF_POWEROVER;
+		if (!(new_status & WDC_SR_PSUUNDR))
+			*status |= WDIOF_POWERUNDER;
+		if (tachometer) {
+			if (!(new_status & WDC_SR_FANGOOD))
+				*status |= WDIOF_FANFAULT;
+		}
+	}
+	return 0;
+}
+
+/**
+ *	wdtpci_get_temperature:
+ *
+ *	Reports the temperature in degrees Fahrenheit. The API is in
+ *	farenheit. It was designed by an imperial measurement luddite.
+ */
+
+static int wdtpci_get_temperature(int *temperature)
+{
+	unsigned short c;
+	unsigned long flags;
+	spin_lock_irqsave(&wdtpci_lock, flags);
+	c = inb(WDT_RT);
+	udelay(8);
+	spin_unlock_irqrestore(&wdtpci_lock, flags);
+	*temperature = (c * 11 / 15) + 7;
+	return 0;
+}
+
+/**
+ *	wdtpci_interrupt:
+ *	@irq:		Interrupt number
+ *	@dev_id:	Unused as we don't allow multiple devices.
+ *
+ *	Handle an interrupt from the board. These are raised when the status
+ *	map changes in what the board considers an interesting way. That means
+ *	a failure condition occurring.
+ */
+
+static irqreturn_t wdtpci_interrupt(int irq, void *dev_id)
+{
+	/*
+	 *	Read the status register see what is up and
+	 *	then printk it.
+	 */
+	unsigned char status;
+
+	spin_lock(&wdtpci_lock);
+
+	status = inb(WDT_SR);
+	udelay(8);
+
+	pr_crit("status %d\n", status);
+
+	if (type == 501) {
+		if (!(status & WDC_SR_TGOOD)) {
+			pr_crit("Overheat alarm (%d)\n", inb(WDT_RT));
+			udelay(8);
+		}
+		if (!(status & WDC_SR_PSUOVER))
+			pr_crit("PSU over voltage\n");
+		if (!(status & WDC_SR_PSUUNDR))
+			pr_crit("PSU under voltage\n");
+		if (tachometer) {
+			if (!(status & WDC_SR_FANGOOD))
+				pr_crit("Possible fan fault\n");
+		}
+	}
+	if (!(status & WDC_SR_WCCR)) {
+#ifdef SOFTWARE_REBOOT
+#ifdef ONLY_TESTING
+		pr_crit("Would Reboot\n");
+#else
+		pr_crit("Initiating system reboot\n");
+		emergency_restart();
+#endif
+#else
+		pr_crit("Reset in 5ms\n");
+#endif
+	}
+	spin_unlock(&wdtpci_lock);
+	return IRQ_HANDLED;
+}
+
+
+/**
+ *	wdtpci_write:
+ *	@file: file handle to the watchdog
+ *	@buf: buffer to write (unused as data does not matter here
+ *	@count: count of bytes
+ *	@ppos: pointer to the position to write. No seeks allowed
+ *
+ *	A write to a watchdog device is defined as a keepalive signal. Any
+ *	write of data will do, as we we don't define content meaning.
+ */
+
+static ssize_t wdtpci_write(struct file *file, const char __user *buf,
+						size_t count, loff_t *ppos)
+{
+	if (count) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			expect_close = 0;
+
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+		wdtpci_ping();
+	}
+	return count;
+}
+
+/**
+ *	wdtpci_ioctl:
+ *	@file: file handle to the device
+ *	@cmd: watchdog command
+ *	@arg: argument pointer
+ *
+ *	The watchdog API defines a common set of functions for all watchdogs
+ *	according to their available features. We only actually usefully support
+ *	querying capabilities and current status.
+ */
+
+static long wdtpci_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int new_heartbeat;
+	int status;
+
+	struct watchdog_info ident = {
+		.options =		WDIOF_SETTIMEOUT|
+					WDIOF_MAGICCLOSE|
+					WDIOF_KEEPALIVEPING,
+		.firmware_version =	1,
+		.identity =		"PCI-WDT500/501",
+	};
+
+	/* Add options according to the card we have */
+	ident.options |= (WDIOF_EXTERN1|WDIOF_EXTERN2);
+	if (type == 501) {
+		ident.options |= (WDIOF_OVERHEAT|WDIOF_POWERUNDER|
+							WDIOF_POWEROVER);
+		if (tachometer)
+			ident.options |= WDIOF_FANFAULT;
+	}
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+	case WDIOC_GETSTATUS:
+		wdtpci_get_status(&status);
+		return put_user(status, p);
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+	case WDIOC_KEEPALIVE:
+		wdtpci_ping();
+		return 0;
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_heartbeat, p))
+			return -EFAULT;
+		if (wdtpci_set_heartbeat(new_heartbeat))
+			return -EINVAL;
+		wdtpci_ping();
+		/* fall through */
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+	default:
+		return -ENOTTY;
+	}
+}
+
+/**
+ *	wdtpci_open:
+ *	@inode: inode of device
+ *	@file: file handle to device
+ *
+ *	The watchdog device has been opened. The watchdog device is single
+ *	open and on opening we load the counters. Counter zero is a 100Hz
+ *	cascade, into counter 1 which downcounts to reboot. When the counter
+ *	triggers counter 2 downcounts the length of the reset pulse which
+ *	set set to be as long as possible.
+ */
+
+static int wdtpci_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &open_lock))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+	/*
+	 *	Activate
+	 */
+	wdtpci_start();
+	return nonseekable_open(inode, file);
+}
+
+/**
+ *	wdtpci_release:
+ *	@inode: inode to board
+ *	@file: file handle to board
+ *
+ *	The watchdog has a configurable API. There is a religious dispute
+ *	between people who want their watchdog to be able to shut down and
+ *	those who want to be sure if the watchdog manager dies the machine
+ *	reboots. In the former case we disable the counters, in the latter
+ *	case you have to open it again very soon.
+ */
+
+static int wdtpci_release(struct inode *inode, struct file *file)
+{
+	if (expect_close == 42) {
+		wdtpci_stop();
+	} else {
+		pr_crit("Unexpected close, not stopping timer!\n");
+		wdtpci_ping();
+	}
+	expect_close = 0;
+	clear_bit(0, &open_lock);
+	return 0;
+}
+
+/**
+ *	wdtpci_temp_read:
+ *	@file: file handle to the watchdog board
+ *	@buf: buffer to write 1 byte into
+ *	@count: length of buffer
+ *	@ptr: offset (no seek allowed)
+ *
+ *	Read reports the temperature in degrees Fahrenheit. The API is in
+ *	fahrenheit. It was designed by an imperial measurement luddite.
+ */
+
+static ssize_t wdtpci_temp_read(struct file *file, char __user *buf,
+						size_t count, loff_t *ptr)
+{
+	int temperature;
+
+	if (wdtpci_get_temperature(&temperature))
+		return -EFAULT;
+
+	if (copy_to_user(buf, &temperature, 1))
+		return -EFAULT;
+
+	return 1;
+}
+
+/**
+ *	wdtpci_temp_open:
+ *	@inode: inode of device
+ *	@file: file handle to device
+ *
+ *	The temperature device has been opened.
+ */
+
+static int wdtpci_temp_open(struct inode *inode, struct file *file)
+{
+	return nonseekable_open(inode, file);
+}
+
+/**
+ *	wdtpci_temp_release:
+ *	@inode: inode to board
+ *	@file: file handle to board
+ *
+ *	The temperature device has been closed.
+ */
+
+static int wdtpci_temp_release(struct inode *inode, struct file *file)
+{
+	return 0;
+}
+
+/**
+ *	notify_sys:
+ *	@this: our notifier block
+ *	@code: the event being reported
+ *	@unused: unused
+ *
+ *	Our notifier is called on system shutdowns. We want to turn the card
+ *	off at reboot otherwise the machine will reboot again during memory
+ *	test or worse yet during the following fsck. This would suck, in fact
+ *	trust me - if it happens it does suck.
+ */
+
+static int wdtpci_notify_sys(struct notifier_block *this, unsigned long code,
+							void *unused)
+{
+	if (code == SYS_DOWN || code == SYS_HALT)
+		wdtpci_stop();
+	return NOTIFY_DONE;
+}
+
+/*
+ *	Kernel Interfaces
+ */
+
+
+static const struct file_operations wdtpci_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= wdtpci_write,
+	.unlocked_ioctl	= wdtpci_ioctl,
+	.open		= wdtpci_open,
+	.release	= wdtpci_release,
+};
+
+static struct miscdevice wdtpci_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &wdtpci_fops,
+};
+
+static const struct file_operations wdtpci_temp_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.read		= wdtpci_temp_read,
+	.open		= wdtpci_temp_open,
+	.release	= wdtpci_temp_release,
+};
+
+static struct miscdevice temp_miscdev = {
+	.minor	= TEMP_MINOR,
+	.name	= "temperature",
+	.fops	= &wdtpci_temp_fops,
+};
+
+/*
+ *	The WDT card needs to learn about soft shutdowns in order to
+ *	turn the timebomb registers off.
+ */
+
+static struct notifier_block wdtpci_notifier = {
+	.notifier_call = wdtpci_notify_sys,
+};
+
+
+static int wdtpci_init_one(struct pci_dev *dev,
+					const struct pci_device_id *ent)
+{
+	int ret = -EIO;
+
+	dev_count++;
+	if (dev_count > 1) {
+		pr_err("This driver only supports one device\n");
+		return -ENODEV;
+	}
+
+	if (type != 500 && type != 501) {
+		pr_err("unknown card type '%d'\n", type);
+		return -ENODEV;
+	}
+
+	if (pci_enable_device(dev)) {
+		pr_err("Not possible to enable PCI Device\n");
+		return -ENODEV;
+	}
+
+	if (pci_resource_start(dev, 2) == 0x0000) {
+		pr_err("No I/O-Address for card detected\n");
+		ret = -ENODEV;
+		goto out_pci;
+	}
+
+	if (pci_request_region(dev, 2, "wdt_pci")) {
+		pr_err("I/O address 0x%llx already in use\n",
+		       (unsigned long long)pci_resource_start(dev, 2));
+		goto out_pci;
+	}
+
+	irq = dev->irq;
+	io = pci_resource_start(dev, 2);
+
+	if (request_irq(irq, wdtpci_interrupt, IRQF_SHARED,
+			 "wdt_pci", &wdtpci_miscdev)) {
+		pr_err("IRQ %d is not free\n", irq);
+		goto out_reg;
+	}
+
+	pr_info("PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%llx (Interrupt %d)\n",
+		(unsigned long long)io, irq);
+
+	/* Check that the heartbeat value is within its range;
+	   if not reset to the default */
+	if (wdtpci_set_heartbeat(heartbeat)) {
+		wdtpci_set_heartbeat(WD_TIMO);
+		pr_info("heartbeat value must be 0 < heartbeat < 65536, using %d\n",
+			WD_TIMO);
+	}
+
+	ret = register_reboot_notifier(&wdtpci_notifier);
+	if (ret) {
+		pr_err("cannot register reboot notifier (err=%d)\n", ret);
+		goto out_irq;
+	}
+
+	if (type == 501) {
+		ret = misc_register(&temp_miscdev);
+		if (ret) {
+			pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+			       TEMP_MINOR, ret);
+			goto out_rbt;
+		}
+	}
+
+	ret = misc_register(&wdtpci_miscdev);
+	if (ret) {
+		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
+		       WATCHDOG_MINOR, ret);
+		goto out_misc;
+	}
+
+	pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n",
+		heartbeat, nowayout);
+	if (type == 501)
+		pr_info("Fan Tachometer is %s\n",
+			tachometer ? "Enabled" : "Disabled");
+
+	ret = 0;
+out:
+	return ret;
+
+out_misc:
+	if (type == 501)
+		misc_deregister(&temp_miscdev);
+out_rbt:
+	unregister_reboot_notifier(&wdtpci_notifier);
+out_irq:
+	free_irq(irq, &wdtpci_miscdev);
+out_reg:
+	pci_release_region(dev, 2);
+out_pci:
+	pci_disable_device(dev);
+	goto out;
+}
+
+
+static void wdtpci_remove_one(struct pci_dev *pdev)
+{
+	/* here we assume only one device will ever have
+	 * been picked up and registered by probe function */
+	misc_deregister(&wdtpci_miscdev);
+	if (type == 501)
+		misc_deregister(&temp_miscdev);
+	unregister_reboot_notifier(&wdtpci_notifier);
+	free_irq(irq, &wdtpci_miscdev);
+	pci_release_region(pdev, 2);
+	pci_disable_device(pdev);
+	dev_count--;
+}
+
+
+static const struct pci_device_id wdtpci_pci_tbl[] = {
+	{
+		.vendor	   = PCI_VENDOR_ID_ACCESSIO,
+		.device	   = PCI_DEVICE_ID_ACCESSIO_WDG_CSM,
+		.subvendor = PCI_ANY_ID,
+		.subdevice = PCI_ANY_ID,
+	},
+	{ 0, }, /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, wdtpci_pci_tbl);
+
+
+static struct pci_driver wdtpci_driver = {
+	.name		= "wdt_pci",
+	.id_table	= wdtpci_pci_tbl,
+	.probe		= wdtpci_init_one,
+	.remove		= wdtpci_remove_one,
+};
+
+module_pci_driver(wdtpci_driver);
+
+MODULE_AUTHOR("JP Nollmann, Alan Cox");
+MODULE_DESCRIPTION("Driver for the ICS PCI-WDT500/501 watchdog cards");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c
new file mode 100644
index 000000000..116c2f47b
--- /dev/null
+++ b/drivers/watchdog/wm831x_wdt.c
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Watchdog driver for the wm831x PMICs
+ *
+ * Copyright (C) 2009 Wolfson Microelectronics
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/uaccess.h>
+#include <linux/gpio.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/watchdog.h>
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		 "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct wm831x_wdt_drvdata {
+	struct watchdog_device wdt;
+	struct wm831x *wm831x;
+	struct mutex lock;
+	int update_gpio;
+	int update_state;
+};
+
+/* We can't use the sub-second values here but they're included
+ * for completeness.  */
+static struct {
+	unsigned int time;  /* Seconds */
+	u16 val;            /* WDOG_TO value */
+} wm831x_wdt_cfgs[] = {
+	{  1, 2 },
+	{  2, 3 },
+	{  4, 4 },
+	{  8, 5 },
+	{ 16, 6 },
+	{ 32, 7 },
+	{ 33, 7 },  /* Actually 32.768s so include both, others round down */
+};
+
+static int wm831x_wdt_start(struct watchdog_device *wdt_dev)
+{
+	struct wm831x_wdt_drvdata *driver_data = watchdog_get_drvdata(wdt_dev);
+	struct wm831x *wm831x = driver_data->wm831x;
+	int ret;
+
+	mutex_lock(&driver_data->lock);
+
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret == 0) {
+		ret = wm831x_set_bits(wm831x, WM831X_WATCHDOG,
+				      WM831X_WDOG_ENA, WM831X_WDOG_ENA);
+		wm831x_reg_lock(wm831x);
+	} else {
+		dev_err(wm831x->dev, "Failed to unlock security key: %d\n",
+			ret);
+	}
+
+	mutex_unlock(&driver_data->lock);
+
+	return ret;
+}
+
+static int wm831x_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct wm831x_wdt_drvdata *driver_data = watchdog_get_drvdata(wdt_dev);
+	struct wm831x *wm831x = driver_data->wm831x;
+	int ret;
+
+	mutex_lock(&driver_data->lock);
+
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret == 0) {
+		ret = wm831x_set_bits(wm831x, WM831X_WATCHDOG,
+				      WM831X_WDOG_ENA, 0);
+		wm831x_reg_lock(wm831x);
+	} else {
+		dev_err(wm831x->dev, "Failed to unlock security key: %d\n",
+			ret);
+	}
+
+	mutex_unlock(&driver_data->lock);
+
+	return ret;
+}
+
+static int wm831x_wdt_ping(struct watchdog_device *wdt_dev)
+{
+	struct wm831x_wdt_drvdata *driver_data = watchdog_get_drvdata(wdt_dev);
+	struct wm831x *wm831x = driver_data->wm831x;
+	int ret;
+	u16 reg;
+
+	mutex_lock(&driver_data->lock);
+
+	if (driver_data->update_gpio) {
+		gpio_set_value_cansleep(driver_data->update_gpio,
+					driver_data->update_state);
+		driver_data->update_state = !driver_data->update_state;
+		ret = 0;
+		goto out;
+	}
+
+	reg = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
+
+	if (!(reg & WM831X_WDOG_RST_SRC)) {
+		dev_err(wm831x->dev, "Hardware watchdog update unsupported\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	reg |= WM831X_WDOG_RESET;
+
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret == 0) {
+		ret = wm831x_reg_write(wm831x, WM831X_WATCHDOG, reg);
+		wm831x_reg_lock(wm831x);
+	} else {
+		dev_err(wm831x->dev, "Failed to unlock security key: %d\n",
+			ret);
+	}
+
+out:
+	mutex_unlock(&driver_data->lock);
+
+	return ret;
+}
+
+static int wm831x_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				  unsigned int timeout)
+{
+	struct wm831x_wdt_drvdata *driver_data = watchdog_get_drvdata(wdt_dev);
+	struct wm831x *wm831x = driver_data->wm831x;
+	int ret, i;
+
+	for (i = 0; i < ARRAY_SIZE(wm831x_wdt_cfgs); i++)
+		if (wm831x_wdt_cfgs[i].time == timeout)
+			break;
+	if (i == ARRAY_SIZE(wm831x_wdt_cfgs))
+		return -EINVAL;
+
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret == 0) {
+		ret = wm831x_set_bits(wm831x, WM831X_WATCHDOG,
+				      WM831X_WDOG_TO_MASK,
+				      wm831x_wdt_cfgs[i].val);
+		wm831x_reg_lock(wm831x);
+	} else {
+		dev_err(wm831x->dev, "Failed to unlock security key: %d\n",
+			ret);
+	}
+
+	wdt_dev->timeout = timeout;
+
+	return ret;
+}
+
+static const struct watchdog_info wm831x_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "WM831x Watchdog",
+};
+
+static const struct watchdog_ops wm831x_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = wm831x_wdt_start,
+	.stop = wm831x_wdt_stop,
+	.ping = wm831x_wdt_ping,
+	.set_timeout = wm831x_wdt_set_timeout,
+};
+
+static int wm831x_wdt_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *chip_pdata = dev_get_platdata(pdev->dev.parent);
+	struct wm831x_watchdog_pdata *pdata;
+	struct wm831x_wdt_drvdata *driver_data;
+	struct watchdog_device *wm831x_wdt;
+	int reg, ret, i;
+
+	ret = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
+	if (ret < 0) {
+		dev_err(wm831x->dev, "Failed to read watchdog status: %d\n",
+			ret);
+		return ret;
+	}
+	reg = ret;
+
+	if (reg & WM831X_WDOG_DEBUG)
+		dev_warn(wm831x->dev, "Watchdog is paused\n");
+
+	driver_data = devm_kzalloc(&pdev->dev, sizeof(*driver_data),
+				   GFP_KERNEL);
+	if (!driver_data)
+		return -ENOMEM;
+
+	mutex_init(&driver_data->lock);
+	driver_data->wm831x = wm831x;
+
+	wm831x_wdt = &driver_data->wdt;
+
+	wm831x_wdt->info = &wm831x_wdt_info;
+	wm831x_wdt->ops = &wm831x_wdt_ops;
+	wm831x_wdt->parent = &pdev->dev;
+	watchdog_set_nowayout(wm831x_wdt, nowayout);
+	watchdog_set_drvdata(wm831x_wdt, driver_data);
+
+	reg = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
+	reg &= WM831X_WDOG_TO_MASK;
+	for (i = 0; i < ARRAY_SIZE(wm831x_wdt_cfgs); i++)
+		if (wm831x_wdt_cfgs[i].val == reg)
+			break;
+	if (i == ARRAY_SIZE(wm831x_wdt_cfgs))
+		dev_warn(wm831x->dev,
+			 "Unknown watchdog timeout: %x\n", reg);
+	else
+		wm831x_wdt->timeout = wm831x_wdt_cfgs[i].time;
+
+	/* Apply any configuration */
+	if (chip_pdata)
+		pdata = chip_pdata->watchdog;
+	else
+		pdata = NULL;
+
+	if (pdata) {
+		reg &= ~(WM831X_WDOG_SECACT_MASK | WM831X_WDOG_PRIMACT_MASK |
+			 WM831X_WDOG_RST_SRC);
+
+		reg |= pdata->primary << WM831X_WDOG_PRIMACT_SHIFT;
+		reg |= pdata->secondary << WM831X_WDOG_SECACT_SHIFT;
+		reg |= pdata->software << WM831X_WDOG_RST_SRC_SHIFT;
+
+		if (pdata->update_gpio) {
+			ret = devm_gpio_request_one(&pdev->dev,
+						pdata->update_gpio,
+						GPIOF_OUT_INIT_LOW,
+						"Watchdog update");
+			if (ret < 0) {
+				dev_err(wm831x->dev,
+					"Failed to request update GPIO: %d\n",
+					ret);
+				return ret;
+			}
+
+			driver_data->update_gpio = pdata->update_gpio;
+
+			/* Make sure the watchdog takes hardware updates */
+			reg |= WM831X_WDOG_RST_SRC;
+		}
+
+		ret = wm831x_reg_unlock(wm831x);
+		if (ret == 0) {
+			ret = wm831x_reg_write(wm831x, WM831X_WATCHDOG, reg);
+			wm831x_reg_lock(wm831x);
+		} else {
+			dev_err(wm831x->dev,
+				"Failed to unlock security key: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = devm_watchdog_register_device(&pdev->dev, &driver_data->wdt);
+	if (ret != 0) {
+		dev_err(wm831x->dev, "watchdog_register_device() failed: %d\n",
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver wm831x_wdt_driver = {
+	.probe = wm831x_wdt_probe,
+	.driver = {
+		.name = "wm831x-watchdog",
+	},
+};
+
+module_platform_driver(wm831x_wdt_driver);
+
+MODULE_AUTHOR("Mark Brown");
+MODULE_DESCRIPTION("WM831x Watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-watchdog");
diff --git a/drivers/watchdog/wm8350_wdt.c b/drivers/watchdog/wm8350_wdt.c
new file mode 100644
index 000000000..33c62d51f
--- /dev/null
+++ b/drivers/watchdog/wm8350_wdt.c
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Watchdog driver for the wm8350
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics <linux@wolfsonmicro.com>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/uaccess.h>
+#include <linux/mfd/wm8350/core.h>
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+		 "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static DEFINE_MUTEX(wdt_mutex);
+
+static struct {
+	unsigned int time;  /* Seconds */
+	u16 val;	    /* To be set in WM8350_SYSTEM_CONTROL_2 */
+} wm8350_wdt_cfgs[] = {
+	{ 1, 0x02 },
+	{ 2, 0x04 },
+	{ 4, 0x05 },
+};
+
+static int wm8350_wdt_set_timeout(struct watchdog_device *wdt_dev,
+				  unsigned int timeout)
+{
+	struct wm8350 *wm8350 = watchdog_get_drvdata(wdt_dev);
+	int ret, i;
+	u16 reg;
+
+	for (i = 0; i < ARRAY_SIZE(wm8350_wdt_cfgs); i++)
+		if (wm8350_wdt_cfgs[i].time == timeout)
+			break;
+	if (i == ARRAY_SIZE(wm8350_wdt_cfgs))
+		return -EINVAL;
+
+	mutex_lock(&wdt_mutex);
+	wm8350_reg_unlock(wm8350);
+
+	reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2);
+	reg &= ~WM8350_WDOG_TO_MASK;
+	reg |= wm8350_wdt_cfgs[i].val;
+	ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg);
+
+	wm8350_reg_lock(wm8350);
+	mutex_unlock(&wdt_mutex);
+
+	wdt_dev->timeout = timeout;
+	return ret;
+}
+
+static int wm8350_wdt_start(struct watchdog_device *wdt_dev)
+{
+	struct wm8350 *wm8350 = watchdog_get_drvdata(wdt_dev);
+	int ret;
+	u16 reg;
+
+	mutex_lock(&wdt_mutex);
+	wm8350_reg_unlock(wm8350);
+
+	reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2);
+	reg &= ~WM8350_WDOG_MODE_MASK;
+	reg |= 0x20;
+	ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg);
+
+	wm8350_reg_lock(wm8350);
+	mutex_unlock(&wdt_mutex);
+
+	return ret;
+}
+
+static int wm8350_wdt_stop(struct watchdog_device *wdt_dev)
+{
+	struct wm8350 *wm8350 = watchdog_get_drvdata(wdt_dev);
+	int ret;
+	u16 reg;
+
+	mutex_lock(&wdt_mutex);
+	wm8350_reg_unlock(wm8350);
+
+	reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2);
+	reg &= ~WM8350_WDOG_MODE_MASK;
+	ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg);
+
+	wm8350_reg_lock(wm8350);
+	mutex_unlock(&wdt_mutex);
+
+	return ret;
+}
+
+static int wm8350_wdt_ping(struct watchdog_device *wdt_dev)
+{
+	struct wm8350 *wm8350 = watchdog_get_drvdata(wdt_dev);
+	int ret;
+	u16 reg;
+
+	mutex_lock(&wdt_mutex);
+
+	reg = wm8350_reg_read(wm8350, WM8350_SYSTEM_CONTROL_2);
+	ret = wm8350_reg_write(wm8350, WM8350_SYSTEM_CONTROL_2, reg);
+
+	mutex_unlock(&wdt_mutex);
+
+	return ret;
+}
+
+static const struct watchdog_info wm8350_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "WM8350 Watchdog",
+};
+
+static const struct watchdog_ops wm8350_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = wm8350_wdt_start,
+	.stop = wm8350_wdt_stop,
+	.ping = wm8350_wdt_ping,
+	.set_timeout = wm8350_wdt_set_timeout,
+};
+
+static struct watchdog_device wm8350_wdt = {
+	.info = &wm8350_wdt_info,
+	.ops = &wm8350_wdt_ops,
+	.timeout = 4,
+	.min_timeout = 1,
+	.max_timeout = 4,
+};
+
+static int wm8350_wdt_probe(struct platform_device *pdev)
+{
+	struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+
+	if (!wm8350) {
+		pr_err("No driver data supplied\n");
+		return -ENODEV;
+	}
+
+	watchdog_set_nowayout(&wm8350_wdt, nowayout);
+	watchdog_set_drvdata(&wm8350_wdt, wm8350);
+	wm8350_wdt.parent = &pdev->dev;
+
+	/* Default to 4s timeout */
+	wm8350_wdt_set_timeout(&wm8350_wdt, 4);
+
+	return watchdog_register_device(&wm8350_wdt);
+}
+
+static int wm8350_wdt_remove(struct platform_device *pdev)
+{
+	watchdog_unregister_device(&wm8350_wdt);
+	return 0;
+}
+
+static struct platform_driver wm8350_wdt_driver = {
+	.probe = wm8350_wdt_probe,
+	.remove = wm8350_wdt_remove,
+	.driver = {
+		.name = "wm8350-wdt",
+	},
+};
+
+module_platform_driver(wm8350_wdt_driver);
+
+MODULE_AUTHOR("Mark Brown");
+MODULE_DESCRIPTION("WM8350 Watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm8350-wdt");
diff --git a/drivers/watchdog/xen_wdt.c b/drivers/watchdog/xen_wdt.c
new file mode 100644
index 000000000..f1c016d01
--- /dev/null
+++ b/drivers/watchdog/xen_wdt.c
@@ -0,0 +1,216 @@
+/*
+ *	Xen Watchdog Driver
+ *
+ *	(c) Copyright 2010 Novell, Inc.
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#define DRV_NAME	"xen_wdt"
+
+#include <linux/bug.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/hrtimer.h>
+#include <linux/kernel.h>
+#include <linux/ktime.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <xen/xen.h>
+#include <asm/xen/hypercall.h>
+#include <xen/interface/sched.h>
+
+static struct platform_device *platform_device;
+static struct sched_watchdog wdt;
+static time64_t wdt_expires;
+
+#define WATCHDOG_TIMEOUT 60 /* in seconds */
+static unsigned int timeout;
+module_param(timeout, uint, S_IRUGO);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds "
+	"(default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, S_IRUGO);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+	"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static inline time64_t set_timeout(struct watchdog_device *wdd)
+{
+	wdt.timeout = wdd->timeout;
+	return ktime_get_seconds() + wdd->timeout;
+}
+
+static int xen_wdt_start(struct watchdog_device *wdd)
+{
+	time64_t expires;
+	int err;
+
+	expires = set_timeout(wdd);
+	if (!wdt.id)
+		err = HYPERVISOR_sched_op(SCHEDOP_watchdog, &wdt);
+	else
+		err = -EBUSY;
+	if (err > 0) {
+		wdt.id = err;
+		wdt_expires = expires;
+		err = 0;
+	} else
+		BUG_ON(!err);
+
+	return err;
+}
+
+static int xen_wdt_stop(struct watchdog_device *wdd)
+{
+	int err = 0;
+
+	wdt.timeout = 0;
+	if (wdt.id)
+		err = HYPERVISOR_sched_op(SCHEDOP_watchdog, &wdt);
+	if (!err)
+		wdt.id = 0;
+
+	return err;
+}
+
+static int xen_wdt_kick(struct watchdog_device *wdd)
+{
+	time64_t expires;
+	int err;
+
+	expires = set_timeout(wdd);
+	if (wdt.id)
+		err = HYPERVISOR_sched_op(SCHEDOP_watchdog, &wdt);
+	else
+		err = -ENXIO;
+	if (!err)
+		wdt_expires = expires;
+
+	return err;
+}
+
+static unsigned int xen_wdt_get_timeleft(struct watchdog_device *wdd)
+{
+	return wdt_expires - ktime_get_seconds();
+}
+
+static struct watchdog_info xen_wdt_info = {
+	.identity = DRV_NAME,
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops xen_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = xen_wdt_start,
+	.stop = xen_wdt_stop,
+	.ping = xen_wdt_kick,
+	.get_timeleft = xen_wdt_get_timeleft,
+};
+
+static struct watchdog_device xen_wdt_dev = {
+	.info = &xen_wdt_info,
+	.ops = &xen_wdt_ops,
+	.timeout = WATCHDOG_TIMEOUT,
+};
+
+static int xen_wdt_probe(struct platform_device *pdev)
+{
+	struct sched_watchdog wd = { .id = ~0 };
+	int ret = HYPERVISOR_sched_op(SCHEDOP_watchdog, &wd);
+
+	if (ret == -ENOSYS) {
+		dev_err(&pdev->dev, "watchdog not supported by hypervisor\n");
+		return -ENODEV;
+	}
+
+	if (ret != -EINVAL) {
+		dev_err(&pdev->dev, "unexpected hypervisor error (%d)\n", ret);
+		return -ENODEV;
+	}
+
+	if (watchdog_init_timeout(&xen_wdt_dev, timeout, NULL))
+		dev_info(&pdev->dev, "timeout value invalid, using %d\n",
+			xen_wdt_dev.timeout);
+	watchdog_set_nowayout(&xen_wdt_dev, nowayout);
+	watchdog_stop_on_reboot(&xen_wdt_dev);
+	watchdog_stop_on_unregister(&xen_wdt_dev);
+
+	ret = devm_watchdog_register_device(&pdev->dev, &xen_wdt_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot register watchdog device (%d)\n",
+			ret);
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "initialized (timeout=%ds, nowayout=%d)\n",
+		xen_wdt_dev.timeout, nowayout);
+
+	return 0;
+}
+
+static int xen_wdt_suspend(struct platform_device *dev, pm_message_t state)
+{
+	typeof(wdt.id) id = wdt.id;
+	int rc = xen_wdt_stop(&xen_wdt_dev);
+
+	wdt.id = id;
+	return rc;
+}
+
+static int xen_wdt_resume(struct platform_device *dev)
+{
+	if (!wdt.id)
+		return 0;
+	wdt.id = 0;
+	return xen_wdt_start(&xen_wdt_dev);
+}
+
+static struct platform_driver xen_wdt_driver = {
+	.probe          = xen_wdt_probe,
+	.suspend        = xen_wdt_suspend,
+	.resume         = xen_wdt_resume,
+	.driver         = {
+		.name   = DRV_NAME,
+	},
+};
+
+static int __init xen_wdt_init_module(void)
+{
+	int err;
+
+	if (!xen_domain())
+		return -ENODEV;
+
+	err = platform_driver_register(&xen_wdt_driver);
+	if (err)
+		return err;
+
+	platform_device = platform_device_register_simple(DRV_NAME,
+								  -1, NULL, 0);
+	if (IS_ERR(platform_device)) {
+		err = PTR_ERR(platform_device);
+		platform_driver_unregister(&xen_wdt_driver);
+	}
+
+	return err;
+}
+
+static void __exit xen_wdt_cleanup_module(void)
+{
+	platform_device_unregister(platform_device);
+	platform_driver_unregister(&xen_wdt_driver);
+}
+
+module_init(xen_wdt_init_module);
+module_exit(xen_wdt_cleanup_module);
+
+MODULE_AUTHOR("Jan Beulich <jbeulich@novell.com>");
+MODULE_DESCRIPTION("Xen WatchDog Timer Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/ziirave_wdt.c b/drivers/watchdog/ziirave_wdt.c
new file mode 100644
index 000000000..d3594aa3a
--- /dev/null
+++ b/drivers/watchdog/ziirave_wdt.c
@@ -0,0 +1,766 @@
+/*
+ * Copyright (C) 2015 Zodiac Inflight Innovations
+ *
+ * Author: Martyn Welch <martyn.welch@collabora.co.uk>
+ *
+ * Based on twl4030_wdt.c by Timo Kokkonen <timo.t.kokkonen at nokia.com>:
+ *
+ * Copyright (C) Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/ihex.h>
+#include <linux/firmware.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/watchdog.h>
+
+#define ZIIRAVE_TIMEOUT_MIN	3
+#define ZIIRAVE_TIMEOUT_MAX	255
+
+#define ZIIRAVE_PING_VALUE	0x0
+
+#define ZIIRAVE_STATE_INITIAL	0x0
+#define ZIIRAVE_STATE_OFF	0x1
+#define ZIIRAVE_STATE_ON	0x2
+
+#define ZIIRAVE_FW_NAME		"ziirave_wdt.fw"
+
+static char *ziirave_reasons[] = {"power cycle", "hw watchdog", NULL, NULL,
+				  "host request", NULL, "illegal configuration",
+				  "illegal instruction", "illegal trap",
+				  "unknown"};
+
+#define ZIIRAVE_WDT_FIRM_VER_MAJOR	0x1
+#define ZIIRAVE_WDT_BOOT_VER_MAJOR	0x3
+#define ZIIRAVE_WDT_RESET_REASON	0x5
+#define ZIIRAVE_WDT_STATE		0x6
+#define ZIIRAVE_WDT_TIMEOUT		0x7
+#define ZIIRAVE_WDT_TIME_LEFT		0x8
+#define ZIIRAVE_WDT_PING		0x9
+#define ZIIRAVE_WDT_RESET_DURATION	0xa
+
+#define ZIIRAVE_FIRM_PKT_TOTAL_SIZE	20
+#define ZIIRAVE_FIRM_PKT_DATA_SIZE	16
+#define ZIIRAVE_FIRM_FLASH_MEMORY_START	0x1600
+#define ZIIRAVE_FIRM_FLASH_MEMORY_END	0x2bbf
+
+/* Received and ready for next Download packet. */
+#define ZIIRAVE_FIRM_DOWNLOAD_ACK	1
+/* Currently writing to flash. Retry Download status in a moment! */
+#define ZIIRAVE_FIRM_DOWNLOAD_BUSY	2
+
+/* Wait for ACK timeout in ms */
+#define ZIIRAVE_FIRM_WAIT_FOR_ACK_TIMEOUT	50
+
+/* Firmware commands */
+#define ZIIRAVE_CMD_DOWNLOAD_START		0x10
+#define ZIIRAVE_CMD_DOWNLOAD_END		0x11
+#define ZIIRAVE_CMD_DOWNLOAD_SET_READ_ADDR	0x12
+#define ZIIRAVE_CMD_DOWNLOAD_READ_BYTE		0x13
+#define ZIIRAVE_CMD_RESET_PROCESSOR		0x0b
+#define ZIIRAVE_CMD_JUMP_TO_BOOTLOADER		0x0c
+#define ZIIRAVE_CMD_DOWNLOAD_PACKET		0x0e
+
+struct ziirave_wdt_rev {
+	unsigned char major;
+	unsigned char minor;
+};
+
+struct ziirave_wdt_data {
+	struct mutex sysfs_mutex;
+	struct watchdog_device wdd;
+	struct ziirave_wdt_rev bootloader_rev;
+	struct ziirave_wdt_rev firmware_rev;
+	int reset_reason;
+};
+
+static int wdt_timeout;
+module_param(wdt_timeout, int, 0);
+MODULE_PARM_DESC(wdt_timeout, "Watchdog timeout in seconds");
+
+static int reset_duration;
+module_param(reset_duration, int, 0);
+MODULE_PARM_DESC(reset_duration,
+		 "Watchdog reset pulse duration in milliseconds");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int ziirave_wdt_revision(struct i2c_client *client,
+				struct ziirave_wdt_rev *rev, u8 command)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, command);
+	if (ret < 0)
+		return ret;
+
+	rev->major = ret;
+
+	ret = i2c_smbus_read_byte_data(client, command + 1);
+	if (ret < 0)
+		return ret;
+
+	rev->minor = ret;
+
+	return 0;
+}
+
+static int ziirave_wdt_set_state(struct watchdog_device *wdd, int state)
+{
+	struct i2c_client *client = to_i2c_client(wdd->parent);
+
+	return i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_STATE, state);
+}
+
+static int ziirave_wdt_start(struct watchdog_device *wdd)
+{
+	return ziirave_wdt_set_state(wdd, ZIIRAVE_STATE_ON);
+}
+
+static int ziirave_wdt_stop(struct watchdog_device *wdd)
+{
+	return ziirave_wdt_set_state(wdd, ZIIRAVE_STATE_OFF);
+}
+
+static int ziirave_wdt_ping(struct watchdog_device *wdd)
+{
+	struct i2c_client *client = to_i2c_client(wdd->parent);
+
+	return i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_PING,
+					 ZIIRAVE_PING_VALUE);
+}
+
+static int ziirave_wdt_set_timeout(struct watchdog_device *wdd,
+				   unsigned int timeout)
+{
+	struct i2c_client *client = to_i2c_client(wdd->parent);
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_TIMEOUT, timeout);
+	if (!ret)
+		wdd->timeout = timeout;
+
+	return ret;
+}
+
+static unsigned int ziirave_wdt_get_timeleft(struct watchdog_device *wdd)
+{
+	struct i2c_client *client = to_i2c_client(wdd->parent);
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, ZIIRAVE_WDT_TIME_LEFT);
+	if (ret < 0)
+		ret = 0;
+
+	return ret;
+}
+
+static int ziirave_firm_wait_for_ack(struct watchdog_device *wdd)
+{
+	struct i2c_client *client = to_i2c_client(wdd->parent);
+	int ret;
+	unsigned long timeout;
+
+	timeout = jiffies + msecs_to_jiffies(ZIIRAVE_FIRM_WAIT_FOR_ACK_TIMEOUT);
+	do {
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+
+		usleep_range(5000, 10000);
+
+		ret = i2c_smbus_read_byte(client);
+		if (ret < 0) {
+			dev_err(&client->dev, "Failed to read byte\n");
+			return ret;
+		}
+	} while (ret == ZIIRAVE_FIRM_DOWNLOAD_BUSY);
+
+	return ret == ZIIRAVE_FIRM_DOWNLOAD_ACK ? 0 : -EIO;
+}
+
+static int ziirave_firm_set_read_addr(struct watchdog_device *wdd, u16 addr)
+{
+	struct i2c_client *client = to_i2c_client(wdd->parent);
+	u8 address[2];
+
+	address[0] = addr & 0xff;
+	address[1] = (addr >> 8) & 0xff;
+
+	return i2c_smbus_write_block_data(client,
+					  ZIIRAVE_CMD_DOWNLOAD_SET_READ_ADDR,
+					  ARRAY_SIZE(address), address);
+}
+
+static int ziirave_firm_write_block_data(struct watchdog_device *wdd,
+					 u8 command, u8 length, const u8 *data,
+					 bool wait_for_ack)
+{
+	struct i2c_client *client = to_i2c_client(wdd->parent);
+	int ret;
+
+	ret = i2c_smbus_write_block_data(client, command, length, data);
+	if (ret) {
+		dev_err(&client->dev,
+			"Failed to send command 0x%02x: %d\n", command, ret);
+		return ret;
+	}
+
+	if (wait_for_ack)
+		ret = ziirave_firm_wait_for_ack(wdd);
+
+	return ret;
+}
+
+static int ziirave_firm_write_byte(struct watchdog_device *wdd, u8 command,
+				   u8 byte, bool wait_for_ack)
+{
+	return ziirave_firm_write_block_data(wdd, command, 1, &byte,
+					     wait_for_ack);
+}
+
+/*
+ * ziirave_firm_write_pkt() - Build and write a firmware packet
+ *
+ * A packet to send to the firmware is composed by following bytes:
+ *     Length | Addr0 | Addr1 | Data0 .. Data15 | Checksum |
+ * Where,
+ *     Length: A data byte containing the length of the data.
+ *     Addr0: Low byte of the address.
+ *     Addr1: High byte of the address.
+ *     Data0 .. Data15: Array of 16 bytes of data.
+ *     Checksum: Checksum byte to verify data integrity.
+ */
+static int ziirave_firm_write_pkt(struct watchdog_device *wdd,
+				  const struct ihex_binrec *rec)
+{
+	struct i2c_client *client = to_i2c_client(wdd->parent);
+	u8 i, checksum = 0, packet[ZIIRAVE_FIRM_PKT_TOTAL_SIZE];
+	int ret;
+	u16 addr;
+
+	memset(packet, 0, ARRAY_SIZE(packet));
+
+	/* Packet length */
+	packet[0] = (u8)be16_to_cpu(rec->len);
+	/* Packet address */
+	addr = (be32_to_cpu(rec->addr) & 0xffff) >> 1;
+	packet[1] = addr & 0xff;
+	packet[2] = (addr & 0xff00) >> 8;
+
+	/* Packet data */
+	if (be16_to_cpu(rec->len) > ZIIRAVE_FIRM_PKT_DATA_SIZE)
+		return -EMSGSIZE;
+	memcpy(packet + 3, rec->data, be16_to_cpu(rec->len));
+
+	/* Packet checksum */
+	for (i = 0; i < ZIIRAVE_FIRM_PKT_TOTAL_SIZE - 1; i++)
+		checksum += packet[i];
+	packet[ZIIRAVE_FIRM_PKT_TOTAL_SIZE - 1] = checksum;
+
+	ret = ziirave_firm_write_block_data(wdd, ZIIRAVE_CMD_DOWNLOAD_PACKET,
+					    ARRAY_SIZE(packet), packet, true);
+	if (ret)
+		dev_err(&client->dev,
+		      "Failed to write firmware packet at address 0x%04x: %d\n",
+		      addr, ret);
+
+	return ret;
+}
+
+static int ziirave_firm_verify(struct watchdog_device *wdd,
+			       const struct firmware *fw)
+{
+	struct i2c_client *client = to_i2c_client(wdd->parent);
+	const struct ihex_binrec *rec;
+	int i, ret;
+	u8 data[ZIIRAVE_FIRM_PKT_DATA_SIZE];
+	u16 addr;
+
+	for (rec = (void *)fw->data; rec; rec = ihex_next_binrec(rec)) {
+		/* Zero length marks end of records */
+		if (!be16_to_cpu(rec->len))
+			break;
+
+		addr = (be32_to_cpu(rec->addr) & 0xffff) >> 1;
+		if (addr < ZIIRAVE_FIRM_FLASH_MEMORY_START ||
+		    addr > ZIIRAVE_FIRM_FLASH_MEMORY_END)
+			continue;
+
+		ret = ziirave_firm_set_read_addr(wdd, addr);
+		if (ret) {
+			dev_err(&client->dev,
+				"Failed to send SET_READ_ADDR command: %d\n",
+				ret);
+			return ret;
+		}
+
+		for (i = 0; i < ARRAY_SIZE(data); i++) {
+			ret = i2c_smbus_read_byte_data(client,
+						ZIIRAVE_CMD_DOWNLOAD_READ_BYTE);
+			if (ret < 0) {
+				dev_err(&client->dev,
+					"Failed to READ DATA: %d\n", ret);
+				return ret;
+			}
+			data[i] = ret;
+		}
+
+		if (memcmp(data, rec->data, be16_to_cpu(rec->len))) {
+			dev_err(&client->dev,
+				"Firmware mismatch at address 0x%04x\n", addr);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int ziirave_firm_upload(struct watchdog_device *wdd,
+			       const struct firmware *fw)
+{
+	struct i2c_client *client = to_i2c_client(wdd->parent);
+	int ret, words_till_page_break;
+	const struct ihex_binrec *rec;
+	struct ihex_binrec *rec_new;
+
+	ret = ziirave_firm_write_byte(wdd, ZIIRAVE_CMD_JUMP_TO_BOOTLOADER, 1,
+				      false);
+	if (ret)
+		return ret;
+
+	msleep(500);
+
+	ret = ziirave_firm_write_byte(wdd, ZIIRAVE_CMD_DOWNLOAD_START, 1, true);
+	if (ret)
+		return ret;
+
+	msleep(500);
+
+	for (rec = (void *)fw->data; rec; rec = ihex_next_binrec(rec)) {
+		/* Zero length marks end of records */
+		if (!be16_to_cpu(rec->len))
+			break;
+
+		/* Check max data size */
+		if (be16_to_cpu(rec->len) > ZIIRAVE_FIRM_PKT_DATA_SIZE) {
+			dev_err(&client->dev, "Firmware packet too long (%d)\n",
+				be16_to_cpu(rec->len));
+			return -EMSGSIZE;
+		}
+
+		/* Calculate words till page break */
+		words_till_page_break = (64 - ((be32_to_cpu(rec->addr) >> 1) &
+					 0x3f));
+		if ((be16_to_cpu(rec->len) >> 1) > words_till_page_break) {
+			/*
+			 * Data in passes page boundary, so we need to split in
+			 * two blocks of data. Create a packet with the first
+			 * block of data.
+			 */
+			rec_new = kzalloc(sizeof(struct ihex_binrec) +
+					  (words_till_page_break << 1),
+					  GFP_KERNEL);
+			if (!rec_new)
+				return -ENOMEM;
+
+			rec_new->len = cpu_to_be16(words_till_page_break << 1);
+			rec_new->addr = rec->addr;
+			memcpy(rec_new->data, rec->data,
+			       be16_to_cpu(rec_new->len));
+
+			ret = ziirave_firm_write_pkt(wdd, rec_new);
+			kfree(rec_new);
+			if (ret)
+				return ret;
+
+			/* Create a packet with the second block of data */
+			rec_new = kzalloc(sizeof(struct ihex_binrec) +
+					  be16_to_cpu(rec->len) -
+					  (words_till_page_break << 1),
+					  GFP_KERNEL);
+			if (!rec_new)
+				return -ENOMEM;
+
+			/* Remaining bytes */
+			rec_new->len = rec->len -
+				       cpu_to_be16(words_till_page_break << 1);
+
+			rec_new->addr = cpu_to_be32(be32_to_cpu(rec->addr) +
+					(words_till_page_break << 1));
+
+			memcpy(rec_new->data,
+			       rec->data + (words_till_page_break << 1),
+			       be16_to_cpu(rec_new->len));
+
+			ret = ziirave_firm_write_pkt(wdd, rec_new);
+			kfree(rec_new);
+			if (ret)
+				return ret;
+		} else {
+			ret = ziirave_firm_write_pkt(wdd, rec);
+			if (ret)
+				return ret;
+		}
+	}
+
+	/* For end of download, the length field will be set to 0 */
+	rec_new = kzalloc(sizeof(struct ihex_binrec) + 1, GFP_KERNEL);
+	if (!rec_new)
+		return -ENOMEM;
+
+	ret = ziirave_firm_write_pkt(wdd, rec_new);
+	kfree(rec_new);
+	if (ret) {
+		dev_err(&client->dev, "Failed to send EMPTY packet: %d\n", ret);
+		return ret;
+	}
+
+	/* This sleep seems to be required */
+	msleep(20);
+
+	/* Start firmware verification */
+	ret = ziirave_firm_verify(wdd, fw);
+	if (ret) {
+		dev_err(&client->dev,
+			"Failed to verify firmware: %d\n", ret);
+		return ret;
+	}
+
+	/* End download operation */
+	ret = ziirave_firm_write_byte(wdd, ZIIRAVE_CMD_DOWNLOAD_END, 1, false);
+	if (ret)
+		return ret;
+
+	/* Reset the processor */
+	ret = ziirave_firm_write_byte(wdd, ZIIRAVE_CMD_RESET_PROCESSOR, 1,
+				      false);
+	if (ret)
+		return ret;
+
+	msleep(500);
+
+	return 0;
+}
+
+static const struct watchdog_info ziirave_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+	.identity = "Zodiac RAVE Watchdog",
+};
+
+static const struct watchdog_ops ziirave_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= ziirave_wdt_start,
+	.stop		= ziirave_wdt_stop,
+	.ping		= ziirave_wdt_ping,
+	.set_timeout	= ziirave_wdt_set_timeout,
+	.get_timeleft	= ziirave_wdt_get_timeleft,
+};
+
+static ssize_t ziirave_wdt_sysfs_show_firm(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client);
+	int ret;
+
+	ret = mutex_lock_interruptible(&w_priv->sysfs_mutex);
+	if (ret)
+		return ret;
+
+	ret = sprintf(buf, "02.%02u.%02u", w_priv->firmware_rev.major,
+		      w_priv->firmware_rev.minor);
+
+	mutex_unlock(&w_priv->sysfs_mutex);
+
+	return ret;
+}
+
+static DEVICE_ATTR(firmware_version, S_IRUGO, ziirave_wdt_sysfs_show_firm,
+		   NULL);
+
+static ssize_t ziirave_wdt_sysfs_show_boot(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client);
+	int ret;
+
+	ret = mutex_lock_interruptible(&w_priv->sysfs_mutex);
+	if (ret)
+		return ret;
+
+	ret = sprintf(buf, "01.%02u.%02u", w_priv->bootloader_rev.major,
+		      w_priv->bootloader_rev.minor);
+
+	mutex_unlock(&w_priv->sysfs_mutex);
+
+	return ret;
+}
+
+static DEVICE_ATTR(bootloader_version, S_IRUGO, ziirave_wdt_sysfs_show_boot,
+		   NULL);
+
+static ssize_t ziirave_wdt_sysfs_show_reason(struct device *dev,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client);
+	int ret;
+
+	ret = mutex_lock_interruptible(&w_priv->sysfs_mutex);
+	if (ret)
+		return ret;
+
+	ret = sprintf(buf, "%s", ziirave_reasons[w_priv->reset_reason]);
+
+	mutex_unlock(&w_priv->sysfs_mutex);
+
+	return ret;
+}
+
+static DEVICE_ATTR(reset_reason, S_IRUGO, ziirave_wdt_sysfs_show_reason,
+		   NULL);
+
+static ssize_t ziirave_wdt_sysfs_store_firm(struct device *dev,
+					    struct device_attribute *attr,
+					    const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client);
+	const struct firmware *fw;
+	int err;
+
+	err = request_ihex_firmware(&fw, ZIIRAVE_FW_NAME, dev);
+	if (err) {
+		dev_err(&client->dev, "Failed to request ihex firmware\n");
+		return err;
+	}
+
+	err = mutex_lock_interruptible(&w_priv->sysfs_mutex);
+	if (err)
+		goto release_firmware;
+
+	err = ziirave_firm_upload(&w_priv->wdd, fw);
+	if (err) {
+		dev_err(&client->dev, "The firmware update failed: %d\n", err);
+		goto unlock_mutex;
+	}
+
+	/* Update firmware version */
+	err = ziirave_wdt_revision(client, &w_priv->firmware_rev,
+				   ZIIRAVE_WDT_FIRM_VER_MAJOR);
+	if (err) {
+		dev_err(&client->dev, "Failed to read firmware version: %d\n",
+			err);
+		goto unlock_mutex;
+	}
+
+	dev_info(&client->dev, "Firmware updated to version 02.%02u.%02u\n",
+		 w_priv->firmware_rev.major, w_priv->firmware_rev.minor);
+
+	/* Restore the watchdog timeout */
+	err = ziirave_wdt_set_timeout(&w_priv->wdd, w_priv->wdd.timeout);
+	if (err)
+		dev_err(&client->dev, "Failed to set timeout: %d\n", err);
+
+unlock_mutex:
+	mutex_unlock(&w_priv->sysfs_mutex);
+
+release_firmware:
+	release_firmware(fw);
+
+	return err ? err : count;
+}
+
+static DEVICE_ATTR(update_firmware, S_IWUSR, NULL,
+		   ziirave_wdt_sysfs_store_firm);
+
+static struct attribute *ziirave_wdt_attrs[] = {
+	&dev_attr_firmware_version.attr,
+	&dev_attr_bootloader_version.attr,
+	&dev_attr_reset_reason.attr,
+	&dev_attr_update_firmware.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(ziirave_wdt);
+
+static int ziirave_wdt_init_duration(struct i2c_client *client)
+{
+	int ret;
+
+	if (!reset_duration) {
+		/* See if the reset pulse duration is provided in an of_node */
+		if (!client->dev.of_node)
+			ret = -ENODEV;
+		else
+			ret = of_property_read_u32(client->dev.of_node,
+						   "reset-duration-ms",
+						   &reset_duration);
+		if (ret) {
+			dev_info(&client->dev,
+				 "Unable to set reset pulse duration, using default\n");
+			return 0;
+		}
+	}
+
+	if (reset_duration < 1 || reset_duration > 255)
+		return -EINVAL;
+
+	dev_info(&client->dev, "Setting reset duration to %dms",
+		 reset_duration);
+
+	return i2c_smbus_write_byte_data(client, ZIIRAVE_WDT_RESET_DURATION,
+					 reset_duration);
+}
+
+static int ziirave_wdt_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	int ret;
+	struct ziirave_wdt_data *w_priv;
+	int val;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	w_priv = devm_kzalloc(&client->dev, sizeof(*w_priv), GFP_KERNEL);
+	if (!w_priv)
+		return -ENOMEM;
+
+	mutex_init(&w_priv->sysfs_mutex);
+
+	w_priv->wdd.info = &ziirave_wdt_info;
+	w_priv->wdd.ops = &ziirave_wdt_ops;
+	w_priv->wdd.min_timeout = ZIIRAVE_TIMEOUT_MIN;
+	w_priv->wdd.max_timeout = ZIIRAVE_TIMEOUT_MAX;
+	w_priv->wdd.parent = &client->dev;
+	w_priv->wdd.groups = ziirave_wdt_groups;
+
+	ret = watchdog_init_timeout(&w_priv->wdd, wdt_timeout, &client->dev);
+	if (ret) {
+		dev_info(&client->dev,
+			 "Unable to select timeout value, using default\n");
+	}
+
+	/*
+	 * The default value set in the watchdog should be perfectly valid, so
+	 * pass that in if we haven't provided one via the module parameter or
+	 * of property.
+	 */
+	if (w_priv->wdd.timeout == 0) {
+		val = i2c_smbus_read_byte_data(client, ZIIRAVE_WDT_TIMEOUT);
+		if (val < 0)
+			return val;
+
+		if (val < ZIIRAVE_TIMEOUT_MIN)
+			return -ENODEV;
+
+		w_priv->wdd.timeout = val;
+	} else {
+		ret = ziirave_wdt_set_timeout(&w_priv->wdd,
+					      w_priv->wdd.timeout);
+		if (ret)
+			return ret;
+
+		dev_info(&client->dev, "Timeout set to %ds.",
+			 w_priv->wdd.timeout);
+	}
+
+	watchdog_set_nowayout(&w_priv->wdd, nowayout);
+
+	i2c_set_clientdata(client, w_priv);
+
+	/* If in unconfigured state, set to stopped */
+	val = i2c_smbus_read_byte_data(client, ZIIRAVE_WDT_STATE);
+	if (val < 0)
+		return val;
+
+	if (val == ZIIRAVE_STATE_INITIAL)
+		ziirave_wdt_stop(&w_priv->wdd);
+
+	ret = ziirave_wdt_init_duration(client);
+	if (ret)
+		return ret;
+
+	ret = ziirave_wdt_revision(client, &w_priv->firmware_rev,
+				   ZIIRAVE_WDT_FIRM_VER_MAJOR);
+	if (ret)
+		return ret;
+
+	ret = ziirave_wdt_revision(client, &w_priv->bootloader_rev,
+				   ZIIRAVE_WDT_BOOT_VER_MAJOR);
+	if (ret)
+		return ret;
+
+	w_priv->reset_reason = i2c_smbus_read_byte_data(client,
+						ZIIRAVE_WDT_RESET_REASON);
+	if (w_priv->reset_reason < 0)
+		return w_priv->reset_reason;
+
+	if (w_priv->reset_reason >= ARRAY_SIZE(ziirave_reasons) ||
+	    !ziirave_reasons[w_priv->reset_reason])
+		return -ENODEV;
+
+	ret = watchdog_register_device(&w_priv->wdd);
+
+	return ret;
+}
+
+static int ziirave_wdt_remove(struct i2c_client *client)
+{
+	struct ziirave_wdt_data *w_priv = i2c_get_clientdata(client);
+
+	watchdog_unregister_device(&w_priv->wdd);
+
+	return 0;
+}
+
+static const struct i2c_device_id ziirave_wdt_id[] = {
+	{ "rave-wdt", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ziirave_wdt_id);
+
+static const struct of_device_id zrv_wdt_of_match[] = {
+	{ .compatible = "zii,rave-wdt", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, zrv_wdt_of_match);
+
+static struct i2c_driver ziirave_wdt_driver = {
+	.driver = {
+		.name = "ziirave_wdt",
+		.of_match_table = zrv_wdt_of_match,
+	},
+	.probe = ziirave_wdt_probe,
+	.remove = ziirave_wdt_remove,
+	.id_table = ziirave_wdt_id,
+};
+
+module_i2c_driver(ziirave_wdt_driver);
+
+MODULE_AUTHOR("Martyn Welch <martyn.welch@collabora.co.uk");
+MODULE_DESCRIPTION("Zodiac Aerospace RAVE Switch Watchdog Processor Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/zx2967_wdt.c b/drivers/watchdog/zx2967_wdt.c
new file mode 100644
index 000000000..9261f7c77
--- /dev/null
+++ b/drivers/watchdog/zx2967_wdt.c
@@ -0,0 +1,289 @@
+/*
+ * watchdog driver for ZTE's zx2967 family
+ *
+ * Copyright (C) 2017 ZTE Ltd.
+ *
+ * Author: Baoyou Xie <baoyou.xie@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/watchdog.h>
+
+#define ZX2967_WDT_CFG_REG			0x4
+#define ZX2967_WDT_LOAD_REG			0x8
+#define ZX2967_WDT_REFRESH_REG			0x18
+#define ZX2967_WDT_START_REG			0x1c
+
+#define ZX2967_WDT_REFRESH_MASK			GENMASK(5, 0)
+
+#define ZX2967_WDT_CFG_DIV(n)			((((n) & 0xff) - 1) << 8)
+#define ZX2967_WDT_START_EN			0x1
+
+/*
+ * Hardware magic number.
+ * When watchdog reg is written, the lowest 16 bits are valid, but
+ * the highest 16 bits should be always this number.
+ */
+#define ZX2967_WDT_WRITEKEY			(0x1234 << 16)
+#define ZX2967_WDT_VAL_MASK			GENMASK(15, 0)
+
+#define ZX2967_WDT_DIV_DEFAULT			16
+#define ZX2967_WDT_DEFAULT_TIMEOUT		32
+#define ZX2967_WDT_MIN_TIMEOUT			1
+#define ZX2967_WDT_MAX_TIMEOUT			524
+#define ZX2967_WDT_MAX_COUNT			0xffff
+
+#define ZX2967_WDT_CLK_FREQ			0x8000
+
+#define ZX2967_WDT_FLAG_REBOOT_MON		BIT(0)
+
+struct zx2967_wdt {
+	struct watchdog_device	wdt_device;
+	void __iomem		*reg_base;
+	struct clk		*clock;
+};
+
+static inline u32 zx2967_wdt_readl(struct zx2967_wdt *wdt, u16 reg)
+{
+	return readl_relaxed(wdt->reg_base + reg);
+}
+
+static inline void zx2967_wdt_writel(struct zx2967_wdt *wdt, u16 reg, u32 val)
+{
+	writel_relaxed(val | ZX2967_WDT_WRITEKEY, wdt->reg_base + reg);
+}
+
+static void zx2967_wdt_refresh(struct zx2967_wdt *wdt)
+{
+	u32 val;
+
+	val = zx2967_wdt_readl(wdt, ZX2967_WDT_REFRESH_REG);
+	/*
+	 * Bit 4-5, 1 and 2: refresh config info
+	 * Bit 2-3, 1 and 2: refresh counter
+	 * Bit 0-1, 1 and 2: refresh int-value
+	 * we shift each group value between 1 and 2 to refresh all data.
+	 */
+	val ^= ZX2967_WDT_REFRESH_MASK;
+	zx2967_wdt_writel(wdt, ZX2967_WDT_REFRESH_REG,
+			  val & ZX2967_WDT_VAL_MASK);
+}
+
+static int
+zx2967_wdt_set_timeout(struct watchdog_device *wdd, unsigned int timeout)
+{
+	struct zx2967_wdt *wdt = watchdog_get_drvdata(wdd);
+	unsigned int divisor = ZX2967_WDT_DIV_DEFAULT;
+	u32 count;
+
+	count = timeout * ZX2967_WDT_CLK_FREQ;
+	if (count > divisor * ZX2967_WDT_MAX_COUNT)
+		divisor = DIV_ROUND_UP(count, ZX2967_WDT_MAX_COUNT);
+	count = DIV_ROUND_UP(count, divisor);
+	zx2967_wdt_writel(wdt, ZX2967_WDT_CFG_REG,
+			ZX2967_WDT_CFG_DIV(divisor) & ZX2967_WDT_VAL_MASK);
+	zx2967_wdt_writel(wdt, ZX2967_WDT_LOAD_REG,
+			count & ZX2967_WDT_VAL_MASK);
+	zx2967_wdt_refresh(wdt);
+	wdd->timeout =  (count * divisor) / ZX2967_WDT_CLK_FREQ;
+
+	return 0;
+}
+
+static void __zx2967_wdt_start(struct zx2967_wdt *wdt)
+{
+	u32 val;
+
+	val = zx2967_wdt_readl(wdt, ZX2967_WDT_START_REG);
+	val |= ZX2967_WDT_START_EN;
+	zx2967_wdt_writel(wdt, ZX2967_WDT_START_REG,
+			val & ZX2967_WDT_VAL_MASK);
+}
+
+static void __zx2967_wdt_stop(struct zx2967_wdt *wdt)
+{
+	u32 val;
+
+	val = zx2967_wdt_readl(wdt, ZX2967_WDT_START_REG);
+	val &= ~ZX2967_WDT_START_EN;
+	zx2967_wdt_writel(wdt, ZX2967_WDT_START_REG,
+			val & ZX2967_WDT_VAL_MASK);
+}
+
+static int zx2967_wdt_start(struct watchdog_device *wdd)
+{
+	struct zx2967_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	zx2967_wdt_set_timeout(wdd, wdd->timeout);
+	__zx2967_wdt_start(wdt);
+
+	return 0;
+}
+
+static int zx2967_wdt_stop(struct watchdog_device *wdd)
+{
+	struct zx2967_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	__zx2967_wdt_stop(wdt);
+
+	return 0;
+}
+
+static int zx2967_wdt_keepalive(struct watchdog_device *wdd)
+{
+	struct zx2967_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	zx2967_wdt_refresh(wdt);
+
+	return 0;
+}
+
+#define ZX2967_WDT_OPTIONS \
+	(WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
+static const struct watchdog_info zx2967_wdt_ident = {
+	.options          =     ZX2967_WDT_OPTIONS,
+	.identity         =	"zx2967 watchdog",
+};
+
+static const struct watchdog_ops zx2967_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = zx2967_wdt_start,
+	.stop = zx2967_wdt_stop,
+	.ping = zx2967_wdt_keepalive,
+	.set_timeout = zx2967_wdt_set_timeout,
+};
+
+static void zx2967_wdt_reset_sysctrl(struct device *dev)
+{
+	int ret;
+	void __iomem *regmap;
+	unsigned int offset, mask, config;
+	struct of_phandle_args out_args;
+
+	ret = of_parse_phandle_with_fixed_args(dev->of_node,
+			"zte,wdt-reset-sysctrl", 3, 0, &out_args);
+	if (ret)
+		return;
+
+	offset = out_args.args[0];
+	config = out_args.args[1];
+	mask = out_args.args[2];
+
+	regmap = syscon_node_to_regmap(out_args.np);
+	if (IS_ERR(regmap)) {
+		of_node_put(out_args.np);
+		return;
+	}
+
+	regmap_update_bits(regmap, offset, mask, config);
+	of_node_put(out_args.np);
+}
+
+static int zx2967_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct zx2967_wdt *wdt;
+	struct resource *base;
+	int ret;
+	struct reset_control *rstc;
+
+	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, wdt);
+
+	wdt->wdt_device.info = &zx2967_wdt_ident;
+	wdt->wdt_device.ops = &zx2967_wdt_ops;
+	wdt->wdt_device.timeout = ZX2967_WDT_DEFAULT_TIMEOUT;
+	wdt->wdt_device.max_timeout = ZX2967_WDT_MAX_TIMEOUT;
+	wdt->wdt_device.min_timeout = ZX2967_WDT_MIN_TIMEOUT;
+	wdt->wdt_device.parent = &pdev->dev;
+
+	base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	wdt->reg_base = devm_ioremap_resource(dev, base);
+	if (IS_ERR(wdt->reg_base))
+		return PTR_ERR(wdt->reg_base);
+
+	zx2967_wdt_reset_sysctrl(dev);
+
+	wdt->clock = devm_clk_get(dev, NULL);
+	if (IS_ERR(wdt->clock)) {
+		dev_err(dev, "failed to find watchdog clock source\n");
+		return PTR_ERR(wdt->clock);
+	}
+
+	ret = clk_prepare_enable(wdt->clock);
+	if (ret < 0) {
+		dev_err(dev, "failed to enable clock\n");
+		return ret;
+	}
+	clk_set_rate(wdt->clock, ZX2967_WDT_CLK_FREQ);
+
+	rstc = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(rstc)) {
+		dev_err(dev, "failed to get rstc");
+		ret = PTR_ERR(rstc);
+		goto err;
+	}
+
+	reset_control_assert(rstc);
+	reset_control_deassert(rstc);
+
+	watchdog_set_drvdata(&wdt->wdt_device, wdt);
+	watchdog_init_timeout(&wdt->wdt_device,
+			ZX2967_WDT_DEFAULT_TIMEOUT, dev);
+	watchdog_set_nowayout(&wdt->wdt_device, WATCHDOG_NOWAYOUT);
+
+	ret = watchdog_register_device(&wdt->wdt_device);
+	if (ret)
+		goto err;
+
+	dev_info(dev, "watchdog enabled (timeout=%d sec, nowayout=%d)",
+		 wdt->wdt_device.timeout, WATCHDOG_NOWAYOUT);
+
+	return 0;
+
+err:
+	clk_disable_unprepare(wdt->clock);
+	return ret;
+}
+
+static int zx2967_wdt_remove(struct platform_device *pdev)
+{
+	struct zx2967_wdt *wdt = platform_get_drvdata(pdev);
+
+	watchdog_unregister_device(&wdt->wdt_device);
+	clk_disable_unprepare(wdt->clock);
+
+	return 0;
+}
+
+static const struct of_device_id zx2967_wdt_match[] = {
+	{ .compatible = "zte,zx296718-wdt", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, zx2967_wdt_match);
+
+static struct platform_driver zx2967_wdt_driver = {
+	.probe		= zx2967_wdt_probe,
+	.remove		= zx2967_wdt_remove,
+	.driver		= {
+		.name	= "zx2967-wdt",
+		.of_match_table	= of_match_ptr(zx2967_wdt_match),
+	},
+};
+module_platform_driver(zx2967_wdt_driver);
+
+MODULE_AUTHOR("Baoyou Xie <baoyou.xie@linaro.org>");
+MODULE_DESCRIPTION("ZTE zx2967 Watchdog Device Driver");
+MODULE_LICENSE("GPL v2");