Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 244 insertions, 0 deletions

diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h
new file mode 100644
index 000000000..05ec927a3
--- /dev/null
+++ b/include/scsi/scsi_transport_sas.h
@@ -0,0 +1,244 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef SCSI_TRANSPORT_SAS_H
+#define SCSI_TRANSPORT_SAS_H
+
+#include <linux/transport_class.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <scsi/sas.h>
+#include <linux/bsg-lib.h>
+
+struct scsi_transport_template;
+struct sas_rphy;
+struct request;
+
+#if !IS_ENABLED(CONFIG_SCSI_SAS_ATTRS)
+static inline int scsi_is_sas_rphy(const struct device *sdev)
+{
+	return 0;
+}
+#else
+extern int scsi_is_sas_rphy(const struct device *);
+#endif
+
+static inline int sas_protocol_ata(enum sas_protocol proto)
+{
+	return ((proto & SAS_PROTOCOL_SATA) ||
+		(proto & SAS_PROTOCOL_STP))? 1 : 0;
+}
+
+enum sas_linkrate {
+	/* These Values are defined in the SAS standard */
+	SAS_LINK_RATE_UNKNOWN = 0,
+	SAS_PHY_DISABLED = 1,
+	SAS_PHY_RESET_PROBLEM = 2,
+	SAS_SATA_SPINUP_HOLD = 3,
+	SAS_SATA_PORT_SELECTOR = 4,
+	SAS_PHY_RESET_IN_PROGRESS = 5,
+	SAS_LINK_RATE_1_5_GBPS = 8,
+	SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
+	SAS_LINK_RATE_3_0_GBPS = 9,
+	SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
+	SAS_LINK_RATE_6_0_GBPS = 10,
+	SAS_LINK_RATE_12_0_GBPS = 11,
+	/* These are virtual to the transport class and may never
+	 * be signalled normally since the standard defined field
+	 * is only 4 bits */
+	SAS_LINK_RATE_FAILED = 0x10,
+	SAS_PHY_VIRTUAL = 0x11,
+};
+
+struct sas_identify {
+	enum sas_device_type	device_type;
+	enum sas_protocol	initiator_port_protocols;
+	enum sas_protocol	target_port_protocols;
+	u64			sas_address;
+	u8			phy_identifier;
+};
+
+struct sas_phy {
+	struct device		dev;
+	int			number;
+	int			enabled;
+
+	/* phy identification */
+	struct sas_identify	identify;
+
+	/* phy attributes */
+	enum sas_linkrate	negotiated_linkrate;
+	enum sas_linkrate	minimum_linkrate_hw;
+	enum sas_linkrate	minimum_linkrate;
+	enum sas_linkrate	maximum_linkrate_hw;
+	enum sas_linkrate	maximum_linkrate;
+
+	/* link error statistics */
+	u32			invalid_dword_count;
+	u32			running_disparity_error_count;
+	u32			loss_of_dword_sync_count;
+	u32			phy_reset_problem_count;
+
+	/* for the list of phys belonging to a port */
+	struct list_head	port_siblings;
+
+	/* available to the lldd */
+	void			*hostdata;
+};
+
+#define dev_to_phy(d) \
+	container_of((d), struct sas_phy, dev)
+#define transport_class_to_phy(dev) \
+	dev_to_phy((dev)->parent)
+#define phy_to_shost(phy) \
+	dev_to_shost((phy)->dev.parent)
+
+struct request_queue;
+struct sas_rphy {
+	struct device		dev;
+	struct sas_identify	identify;
+	struct list_head	list;
+	struct request_queue	*q;
+	u32			scsi_target_id;
+};
+
+#define dev_to_rphy(d) \
+	container_of((d), struct sas_rphy, dev)
+#define transport_class_to_rphy(dev) \
+	dev_to_rphy((dev)->parent)
+#define rphy_to_shost(rphy) \
+	dev_to_shost((rphy)->dev.parent)
+#define target_to_rphy(targ) \
+	dev_to_rphy((targ)->dev.parent)
+
+struct sas_end_device {
+	struct sas_rphy		rphy;
+	/* flags */
+	unsigned		ready_led_meaning:1;
+	unsigned		tlr_supported:1;
+	unsigned		tlr_enabled:1;
+	/* parameters */
+	u16			I_T_nexus_loss_timeout;
+	u16			initiator_response_timeout;
+};
+#define rphy_to_end_device(r) \
+	container_of((r), struct sas_end_device, rphy)
+
+struct sas_expander_device {
+	int    level;
+	int    next_port_id;
+
+	#define SAS_EXPANDER_VENDOR_ID_LEN	8
+	char   vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1];
+	#define SAS_EXPANDER_PRODUCT_ID_LEN	16
+	char   product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1];
+	#define SAS_EXPANDER_PRODUCT_REV_LEN	4
+	char   product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1];
+	#define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN	8
+	char   component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1];
+	u16    component_id;
+	u8     component_revision_id;
+
+	struct sas_rphy		rphy;
+
+};
+#define rphy_to_expander_device(r) \
+	container_of((r), struct sas_expander_device, rphy)
+
+struct sas_port {
+	struct device		dev;
+
+	int			port_identifier;
+	int			num_phys;
+	/* port flags */
+	unsigned int		is_backlink:1;
+
+	/* the other end of the link */
+	struct sas_rphy		*rphy;
+
+	struct mutex		phy_list_mutex;
+	struct list_head	phy_list;
+	struct list_head	del_list; /* libsas only */
+};
+
+#define dev_to_sas_port(d) \
+	container_of((d), struct sas_port, dev)
+#define transport_class_to_sas_port(dev) \
+	dev_to_sas_port((dev)->parent)
+
+struct sas_phy_linkrates {
+	enum sas_linkrate maximum_linkrate;
+	enum sas_linkrate minimum_linkrate;
+};
+
+/* The functions by which the transport class and the driver communicate */
+struct sas_function_template {
+	int (*get_linkerrors)(struct sas_phy *);
+	int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
+	int (*get_bay_identifier)(struct sas_rphy *);
+	int (*phy_reset)(struct sas_phy *, int);
+	int (*phy_enable)(struct sas_phy *, int);
+	int (*phy_setup)(struct sas_phy *);
+	void (*phy_release)(struct sas_phy *);
+	int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
+	void (*smp_handler)(struct bsg_job *, struct Scsi_Host *,
+			struct sas_rphy *);
+};
+
+
+void sas_remove_children(struct device *);
+extern void sas_remove_host(struct Scsi_Host *);
+
+extern struct sas_phy *sas_phy_alloc(struct device *, int);
+extern void sas_phy_free(struct sas_phy *);
+extern int sas_phy_add(struct sas_phy *);
+extern void sas_phy_delete(struct sas_phy *);
+extern int scsi_is_sas_phy(const struct device *);
+
+u64 sas_get_address(struct scsi_device *);
+unsigned int sas_tlr_supported(struct scsi_device *);
+unsigned int sas_is_tlr_enabled(struct scsi_device *);
+void sas_disable_tlr(struct scsi_device *);
+void sas_enable_tlr(struct scsi_device *);
+
+extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
+extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
+void sas_rphy_free(struct sas_rphy *);
+extern int sas_rphy_add(struct sas_rphy *);
+extern void sas_rphy_remove(struct sas_rphy *);
+extern void sas_rphy_delete(struct sas_rphy *);
+extern void sas_rphy_unlink(struct sas_rphy *);
+
+struct sas_port *sas_port_alloc(struct device *, int);
+struct sas_port *sas_port_alloc_num(struct device *);
+int sas_port_add(struct sas_port *);
+void sas_port_free(struct sas_port *);
+void sas_port_delete(struct sas_port *);
+void sas_port_add_phy(struct sas_port *, struct sas_phy *);
+void sas_port_delete_phy(struct sas_port *, struct sas_phy *);
+void sas_port_mark_backlink(struct sas_port *);
+int scsi_is_sas_port(const struct device *);
+struct sas_phy *sas_port_get_phy(struct sas_port *port);
+static inline void sas_port_put_phy(struct sas_phy *phy)
+{
+	if (phy)
+		put_device(&phy->dev);
+}
+
+extern struct scsi_transport_template *
+sas_attach_transport(struct sas_function_template *);
+extern void sas_release_transport(struct scsi_transport_template *);
+int sas_read_port_mode_page(struct scsi_device *);
+
+static inline int
+scsi_is_sas_expander_device(struct device *dev)
+{
+	struct sas_rphy *rphy;
+	if (!scsi_is_sas_rphy(dev))
+		return 0;
+	rphy = dev_to_rphy(dev);
+	return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE ||
+		rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
+}
+
+#define scsi_is_sas_phy_local(phy)	scsi_is_host_device((phy)->dev.parent)
+
+#endif /* SCSI_TRANSPORT_SAS_H */