Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

51 files changed, 15629 insertions, 0 deletions

diff --git a/include/scsi/fc/fc_encaps.h b/include/scsi/fc/fc_encaps.h
new file mode 100644
index 000000000..f180c3e16
--- /dev/null
+++ b/include/scsi/fc/fc_encaps.h
@@ -0,0 +1,138 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+#ifndef _FC_ENCAPS_H_
+#define _FC_ENCAPS_H_
+
+/*
+ * Protocol definitions from RFC 3643 - Fibre Channel Frame Encapsulation.
+ *
+ * Note:  The frame length field is the number of 32-bit words in
+ * the encapsulation including the fcip_encaps_header, CRC and EOF words.
+ * The minimum frame length value in bytes is (32 + 24 + 4 + 4) * 4 = 64.
+ * The maximum frame length value in bytes is (32 + 24 + 2112 + 4 + 4) = 2172.
+ */
+#define FC_ENCAPS_MIN_FRAME_LEN 64	/* min frame len (bytes) (see above) */
+#define FC_ENCAPS_MAX_FRAME_LEN (FC_ENCAPS_MIN_FRAME_LEN + FC_MAX_PAYLOAD)
+
+#define FC_ENCAPS_VER       1           /* current version number */
+
+struct fc_encaps_hdr {
+	__u8	fc_proto;	/* protocol number */
+	__u8	fc_ver;		/* version of encapsulation */
+	__u8	fc_proto_n;	/* ones complement of protocol */
+	__u8	fc_ver_n;	/* ones complement of version */
+
+	unsigned char fc_proto_data[8]; /* protocol specific data */
+
+	__be16	fc_len_flags;	/* 10-bit length/4 w/ 6 flag bits */
+	__be16	fc_len_flags_n;	/* ones complement of length / flags */
+
+	/*
+	 * Offset 0x10
+	 */
+	__be32	fc_time[2];	/* time stamp: seconds and fraction */
+	__be32	fc_crc;		/* CRC */
+	__be32	fc_sof;		/* start of frame (see FC_SOF below) */
+
+	/* 0x20 - FC frame content followed by EOF word */
+};
+
+#define FCIP_ENCAPS_HDR_LEN 0x20	/* expected length for asserts */
+
+/*
+ * Macro's for making redundant copies of EOF and SOF.
+ */
+#define FC_XY(x, y)		((((x) & 0xff) << 8) | ((y) & 0xff))
+#define FC_XYXY(x, y)		((FCIP_XY(x, y) << 16) | FCIP_XY(x, y))
+#define FC_XYNN(x, y)		(FCIP_XYXY(x, y) ^ 0xffff)
+
+#define FC_SOF_ENCODE(n)	FC_XYNN(n, n)
+#define FC_EOF_ENCODE(n)	FC_XYNN(n, n)
+
+/*
+ * SOF / EOF bytes.
+ */
+enum fc_sof {
+	FC_SOF_F =	0x28,	/* fabric */
+	FC_SOF_I4 =	0x29,	/* initiate class 4 */
+	FC_SOF_I2 =	0x2d,	/* initiate class 2 */
+	FC_SOF_I3 =	0x2e,	/* initiate class 3 */
+	FC_SOF_N4 =	0x31,	/* normal class 4 */
+	FC_SOF_N2 =	0x35,	/* normal class 2 */
+	FC_SOF_N3 =	0x36,	/* normal class 3 */
+	FC_SOF_C4 =	0x39,	/* activate class 4 */
+} __attribute__((packed));
+
+enum fc_eof {
+	FC_EOF_N =	0x41,	/* normal (not last frame of seq) */
+	FC_EOF_T =	0x42,	/* terminate (last frame of sequence) */
+	FC_EOF_RT =	0x44,
+	FC_EOF_DT =	0x46,	/* disconnect-terminate class-1 */
+	FC_EOF_NI =	0x49,	/* normal-invalid */
+	FC_EOF_DTI =	0x4e,	/* disconnect-terminate-invalid */
+	FC_EOF_RTI =	0x4f,
+	FC_EOF_A =	0x50,	/* abort */
+} __attribute__((packed));
+
+#define FC_SOF_CLASS_MASK 0x06	/* mask for class of service in SOF */
+
+/*
+ * Define classes in terms of the SOF code (initial).
+ */
+enum fc_class {
+	FC_CLASS_NONE = 0,	/* software value indicating no class */
+	FC_CLASS_2 =	FC_SOF_I2,
+	FC_CLASS_3 =	FC_SOF_I3,
+	FC_CLASS_4 =	FC_SOF_I4,
+	FC_CLASS_F =	FC_SOF_F,
+};
+
+/*
+ * Determine whether SOF code indicates the need for a BLS ACK.
+ */
+static inline int fc_sof_needs_ack(enum fc_sof sof)
+{
+	return (~sof) & 0x02;	/* true for class 1, 2, 4, 6, or F */
+}
+
+/*
+ * Given an fc_class, return the normal (non-initial) SOF value.
+ */
+static inline enum fc_sof fc_sof_normal(enum fc_class class)
+{
+	return class + FC_SOF_N3 - FC_SOF_I3;	/* diff is always 8 */
+}
+
+/*
+ * Compute class from SOF value.
+ */
+static inline enum fc_class fc_sof_class(enum fc_sof sof)
+{
+	return (sof & 0x7) | FC_SOF_F;
+}
+
+/*
+ * Determine whether SOF is for the initial frame of a sequence.
+ */
+static inline int fc_sof_is_init(enum fc_sof sof)
+{
+	return sof < 0x30;
+}
+
+#endif /* _FC_ENCAPS_H_ */
diff --git a/include/scsi/fc/fc_fc2.h b/include/scsi/fc/fc_fc2.h
new file mode 100644
index 000000000..0b2671431
--- /dev/null
+++ b/include/scsi/fc/fc_fc2.h
@@ -0,0 +1,123 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_FC2_H_
+#define _FC_FC2_H_
+
+/*
+ * Fibre Channel Exchanges and Sequences.
+ */
+#ifndef PACKED
+#define PACKED  __attribute__ ((__packed__))
+#endif /* PACKED */
+
+
+/*
+ * Sequence Status Block.
+ * This format is set by the FC-FS standard and is sent over the wire.
+ * Note that the fields aren't all naturally aligned.
+ */
+struct fc_ssb {
+	__u8	ssb_seq_id;		/* sequence ID */
+	__u8	_ssb_resvd;
+	__be16	ssb_low_seq_cnt;	/* lowest SEQ_CNT */
+
+	__be16	ssb_high_seq_cnt;	/* highest SEQ_CNT */
+	__be16	ssb_s_stat;		/* sequence status flags */
+
+	__be16	ssb_err_seq_cnt;	/* error SEQ_CNT */
+	__u8	ssb_fh_cs_ctl;		/* frame header CS_CTL */
+	__be16	ssb_fh_ox_id;		/* frame header OX_ID */
+	__be16	ssb_rx_id;		/* responder's exchange ID */
+	__u8	_ssb_resvd2[2];
+} PACKED;
+
+/*
+ * The SSB should be 17 bytes.  Since it's layout is somewhat strange,
+ * we define the size here so that code can ASSERT that the size comes out
+ * correct.
+ */
+#define FC_SSB_SIZE         17          /* length of fc_ssb for assert */
+
+/*
+ * ssb_s_stat - flags from FC-FS-2 T11/1619-D Rev 0.90.
+ */
+#define SSB_ST_RESP         (1 << 15)   /* sequence responder */
+#define SSB_ST_ACTIVE       (1 << 14)   /* sequence is active */
+#define SSB_ST_ABNORMAL     (1 << 12)   /* abnormal ending condition */
+
+#define SSB_ST_REQ_MASK     (3 << 10)   /* ACK, abort sequence condition */
+#define SSB_ST_REQ_CONT     (0 << 10)
+#define SSB_ST_REQ_ABORT    (1 << 10)
+#define SSB_ST_REQ_STOP     (2 << 10)
+#define SSB_ST_REQ_RETRANS  (3 << 10)
+
+#define SSB_ST_ABTS         (1 << 9)    /* ABTS protocol completed */
+#define SSB_ST_RETRANS      (1 << 8)    /* retransmission completed */
+#define SSB_ST_TIMEOUT      (1 << 7)    /* sequence timed out by recipient */
+#define SSB_ST_P_RJT        (1 << 6)    /* P_RJT transmitted */
+
+#define SSB_ST_CLASS_BIT    4           /* class of service field LSB */
+#define SSB_ST_CLASS_MASK   3           /* class of service mask */
+#define SSB_ST_ACK          (1 << 3)    /* ACK (EOFt or EOFdt) transmitted */
+
+/*
+ * Exchange Status Block.
+ * This format is set by the FC-FS standard and is sent over the wire.
+ * Note that the fields aren't all naturally aligned.
+ */
+struct fc_esb {
+	__u8	esb_cs_ctl;		/* CS_CTL for frame header */
+	__be16	esb_ox_id;		/* originator exchange ID */
+	__be16	esb_rx_id;		/* responder exchange ID */
+	__be32	esb_orig_fid;		/* fabric ID of originator */
+	__be32	esb_resp_fid;		/* fabric ID of responder */
+	__be32	esb_e_stat;		/* status */
+	__u8	_esb_resvd[4];
+	__u8	esb_service_params[112]; /* TBD */
+	__u8	esb_seq_status[8];	/* sequence statuses, 8 bytes each */
+} __attribute__((packed));
+
+/*
+ * Define expected size for ASSERTs.
+ * See comments on FC_SSB_SIZE.
+ */
+#define FC_ESB_SIZE         (1 + 5*4 + 112 + 8)     /* expected size */
+
+/*
+ * esb_e_stat - flags from FC-FS-2 T11/1619-D Rev 0.90.
+ */
+#define ESB_ST_RESP         (1 << 31)   /* responder to exchange */
+#define ESB_ST_SEQ_INIT     (1 << 30)   /* port holds sequence initiative */
+#define ESB_ST_COMPLETE     (1 << 29)   /* exchange is complete */
+#define ESB_ST_ABNORMAL     (1 << 28)   /* abnormal ending condition */
+#define ESB_ST_REC_QUAL     (1 << 26)   /* recovery qualifier active */
+
+#define ESB_ST_ERRP_BIT     24          /* LSB for error policy */
+#define ESB_ST_ERRP_MASK    (3 << 24)   /* mask for error policy */
+#define ESB_ST_ERRP_MULT    (0 << 24)   /* abort, discard multiple sequences */
+#define ESB_ST_ERRP_SING    (1 << 24)   /* abort, discard single sequence */
+#define ESB_ST_ERRP_INF     (2 << 24)   /* process with infinite buffers */
+#define ESB_ST_ERRP_IMM     (3 << 24)   /* discard mult. with immed. retran. */
+
+#define ESB_ST_OX_ID_INVL   (1 << 23)   /* originator XID invalid */
+#define ESB_ST_RX_ID_INVL   (1 << 22)   /* responder XID invalid */
+#define ESB_ST_PRI_INUSE    (1 << 21)   /* priority / preemption in use */
+
+#endif /* _FC_FC2_H_ */
diff --git a/include/scsi/fc/fc_fcoe.h b/include/scsi/fc/fc_fcoe.h
new file mode 100644
index 000000000..d5dcd6062
--- /dev/null
+++ b/include/scsi/fc/fc_fcoe.h
@@ -0,0 +1,108 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_FCOE_H_
+#define	_FC_FCOE_H_
+
+/*
+ * FCoE - Fibre Channel over Ethernet.
+ * See T11 FC-BB-5 Rev 2.00 (09-056v5.pdf)
+ */
+
+/*
+ * Default FC_FCOE_OUI / FC-MAP value.
+ */
+#define	FC_FCOE_OUI	0x0efc00	/* upper 24 bits of FCOE MAC */
+
+/*
+ * Fabric Login (FLOGI) MAC for non-FIP use.  Non-FIP use is deprecated.
+ */
+#define	FC_FCOE_FLOGI_MAC { 0x0e, 0xfc, 0x00, 0xff, 0xff, 0xfe }
+
+#define	FC_FCOE_VER	0			/* version */
+
+/*
+ * Ethernet Addresses based on FC S_ID and D_ID.
+ * Generated by FC_FCOE_OUI | S_ID/D_ID
+ */
+#define	FC_FCOE_ENCAPS_ID(n)	(((u64) FC_FCOE_OUI << 24) | (n))
+#define	FC_FCOE_DECAPS_ID(n)	((n) >> 24)
+
+/*
+ * FCoE frame header - 14 bytes
+ * This follows the VLAN header, which includes the ethertype.
+ */
+struct fcoe_hdr {
+	__u8		fcoe_ver;	/* version field - upper 4 bits */
+	__u8		fcoe_resvd[12];	/* reserved - send zero and ignore */
+	__u8		fcoe_sof;	/* start of frame per RFC 3643 */
+};
+
+#define FC_FCOE_DECAPS_VER(hp)	    ((hp)->fcoe_ver >> 4)
+#define FC_FCOE_ENCAPS_VER(hp, ver) ((hp)->fcoe_ver = (ver) << 4)
+
+/*
+ * FCoE CRC & EOF - 8 bytes.
+ */
+struct fcoe_crc_eof {
+	__le32		fcoe_crc32;	/* CRC for FC packet */
+	__u8		fcoe_eof;	/* EOF from RFC 3643 */
+	__u8		fcoe_resvd[3];	/* reserved - send zero and ignore */
+} __attribute__((packed));
+
+/*
+ * Minimum FCoE + FC header length
+ * 14 bytes FCoE header + 24 byte FC header = 38 bytes
+ */
+#define FCOE_HEADER_LEN 38
+
+/*
+ * Minimum FCoE frame size
+ * 14 bytes FCoE header + 24 byte FC header + 8 byte FCoE trailer = 46 bytes
+ */
+#define FCOE_MIN_FRAME 46
+
+/*
+ * FCoE Link Error Status Block: T11 FC-BB-5 Rev2.0, Clause 7.10.
+ */
+struct fcoe_fc_els_lesb {
+	__be32		lesb_link_fail;	/* link failure count */
+	__be32		lesb_vlink_fail; /* virtual link failure count */
+	__be32		lesb_miss_fka;	/* missing FIP keep-alive count */
+	__be32		lesb_symb_err;	/* symbol error during carrier count */
+	__be32		lesb_err_block;	/* errored block count */
+	__be32		lesb_fcs_error; /* frame check sequence error count */
+};
+
+/*
+ * fc_fcoe_set_mac - Store OUI + DID into MAC address field.
+ * @mac: mac address to be set
+ * @did: fc dest id to use
+ */
+static inline void fc_fcoe_set_mac(u8 *mac, u8 *did)
+{
+	mac[0] = (u8) (FC_FCOE_OUI >> 16);
+	mac[1] = (u8) (FC_FCOE_OUI >> 8);
+	mac[2] = (u8) FC_FCOE_OUI;
+	mac[3] = did[0];
+	mac[4] = did[1];
+	mac[5] = did[2];
+}
+
+#endif /* _FC_FCOE_H_ */
diff --git a/include/scsi/fc/fc_fcp.h b/include/scsi/fc/fc_fcp.h
new file mode 100644
index 000000000..9c8702942
--- /dev/null
+++ b/include/scsi/fc/fc_fcp.h
@@ -0,0 +1,216 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_FCP_H_
+#define	_FC_FCP_H_
+
+#include <scsi/scsi.h>
+
+/*
+ * Fibre Channel Protocol for SCSI.
+ * From T10 FCP-3, T10 project 1560-D Rev 4, Sept. 13, 2005.
+ */
+
+/*
+ * fc/fs.h defines FC_TYPE_FCP.
+ */
+
+/*
+ * Service parameter page parameters (word 3 bits) for Process Login.
+ */
+#define	FCP_SPPF_TASK_RETRY_ID	0x0200	/* task retry ID requested */
+#define	FCP_SPPF_RETRY		0x0100	/* retry supported */
+#define	FCP_SPPF_CONF_COMPL	0x0080	/* confirmed completion allowed */
+#define	FCP_SPPF_OVLY_ALLOW	0x0040	/* data overlay allowed */
+#define	FCP_SPPF_INIT_FCN	0x0020	/* initiator function */
+#define	FCP_SPPF_TARG_FCN	0x0010	/* target function */
+#define	FCP_SPPF_RD_XRDY_DIS	0x0002	/* disable XFER_RDY for reads */
+#define	FCP_SPPF_WR_XRDY_DIS	0x0001	/* disable XFER_RDY for writes */
+
+/*
+ * FCP_CMND IU Payload.
+ */
+struct fcp_cmnd {
+	struct scsi_lun	fc_lun;		/* logical unit number */
+	__u8		fc_cmdref;	/* command reference number */
+	__u8		fc_pri_ta;	/* priority and task attribute */
+	__u8		fc_tm_flags;	/* task management flags */
+	__u8		fc_flags;	/* additional len & flags */
+	__u8		fc_cdb[16];	/* base CDB */
+	__be32		fc_dl;		/* data length (must follow fc_cdb) */
+};
+
+#define	FCP_CMND_LEN	32	/* expected length of structure */
+
+struct fcp_cmnd32 {
+	struct scsi_lun	fc_lun;		/* logical unit number */
+	__u8		fc_cmdref;	/* command reference number */
+	__u8		fc_pri_ta;	/* priority and task attribute */
+	__u8		fc_tm_flags;	/* task management flags */
+	__u8		fc_flags;	/* additional len & flags */
+	__u8		fc_cdb[32];	/* base CDB */
+	__be32		fc_dl;		/* data length (must follow fc_cdb) */
+};
+
+#define	FCP_CMND32_LEN	    48	/* expected length of structure */
+#define	FCP_CMND32_ADD_LEN  (16 / 4)	/* Additional cdb length */
+
+/*
+ * fc_pri_ta.
+ */
+#define	FCP_PTA_SIMPLE	    0	/* simple task attribute */
+#define	FCP_PTA_HEADQ	    1	/* head of queue task attribute */
+#define	FCP_PTA_ORDERED     2	/* ordered task attribute */
+#define	FCP_PTA_ACA	    4	/* auto. contingent allegiance */
+#define	FCP_PTA_MASK	    7	/* mask for task attribute field */
+#define	FCP_PRI_SHIFT	    3	/* priority field starts in bit 3 */
+#define	FCP_PRI_RESVD_MASK  0x80	/* reserved bits in priority field */
+
+/*
+ * fc_tm_flags - task management flags field.
+ */
+#define	FCP_TMF_CLR_ACA		0x40	/* clear ACA condition */
+#define	FCP_TMF_TGT_RESET	0x20	/* target reset task management,
+					   deprecated as of FCP-3 */
+#define	FCP_TMF_LUN_RESET	0x10	/* logical unit reset task management */
+#define	FCP_TMF_CLR_TASK_SET	0x04	/* clear task set */
+#define	FCP_TMF_ABT_TASK_SET	0x02	/* abort task set */
+
+/*
+ * fc_flags.
+ *  Bits 7:2 are the additional FCP_CDB length / 4.
+ */
+#define	FCP_CFL_LEN_MASK	0xfc	/* mask for additional length */
+#define	FCP_CFL_LEN_SHIFT	2	/* shift bits for additional length */
+#define	FCP_CFL_RDDATA		0x02	/* read data */
+#define	FCP_CFL_WRDATA		0x01	/* write data */
+
+/*
+ * FCP_TXRDY IU - transfer ready payload.
+ */
+struct fcp_txrdy {
+	__be32		ft_data_ro;	/* data relative offset */
+	__be32		ft_burst_len;	/* burst length */
+	__u8		_ft_resvd[4];	/* reserved */
+};
+
+#define	FCP_TXRDY_LEN	12	/* expected length of structure */
+
+/*
+ * FCP_RESP IU - response payload.
+ *
+ * The response payload comes in three parts: the flags/status, the
+ * sense/response lengths and the sense data/response info section.
+ *
+ * From FCP3r04, note 6 of section 9.5.13:
+ *
+ * Some early implementations presented the FCP_RSP IU without the FCP_RESID,
+ * FCP_SNS_LEN, and FCP_RSP_LEN fields if the FCP_RESID_UNDER, FCP_RESID_OVER,
+ * FCP_SNS_LEN_VALID, and FCP_RSP_LEN_VALID bits were all set to zero. This
+ * non-standard behavior should be tolerated.
+ *
+ * All response frames will always contain the fcp_resp template.  Some
+ * will also include the fcp_resp_len template.
+ *
+ * From Table 23, the FCP_RSP_INFO can either be 4 bytes or 8 bytes, both
+ * are valid length.
+ */
+struct fcp_resp {
+	__u8		_fr_resvd[8];	/* reserved */
+	__be16		fr_retry_delay;	/* retry delay timer */
+	__u8		fr_flags;	/* flags */
+	__u8		fr_status;	/* SCSI status code */
+};
+
+#define	FCP_RESP_LEN	12	/* expected length of structure */
+
+struct fcp_resp_ext {
+	__be32		fr_resid;	/* Residual value */
+	__be32		fr_sns_len;	/* SCSI Sense length */
+	__be32		fr_rsp_len;	/* Response Info length */
+
+	/*
+	 * Optionally followed by RSP info and/or SNS info and/or
+	 * bidirectional read residual length, if any.
+	 */
+};
+
+#define FCP_RESP_EXT_LEN    12  /* expected length of the structure */
+
+struct fcp_resp_rsp_info {
+    __u8      _fr_resvd[3];       /* reserved */
+    __u8      rsp_code;           /* Response Info Code */
+    __u8      _fr_resvd2[4];      /* reserved */
+};
+
+#define FCP_RESP_RSP_INFO_LEN4    4 /* without reserved field */
+#define FCP_RESP_RSP_INFO_LEN8    8 /* with reserved field */
+
+struct fcp_resp_with_ext {
+	struct fcp_resp resp;
+	struct fcp_resp_ext ext;
+};
+
+#define	FCP_RESP_WITH_EXT   (FCP_RESP_LEN + FCP_RESP_EXT_LEN)
+
+/*
+ * fr_flags.
+ */
+#define	FCP_BIDI_RSP	    0x80	/* bidirectional read response */
+#define	FCP_BIDI_READ_UNDER 0x40	/* bidir. read less than requested */
+#define	FCP_BIDI_READ_OVER  0x20	/* DL insufficient for full transfer */
+#define	FCP_CONF_REQ	    0x10	/* confirmation requested */
+#define	FCP_RESID_UNDER     0x08	/* transfer shorter than expected */
+#define	FCP_RESID_OVER	    0x04	/* DL insufficient for full transfer */
+#define	FCP_SNS_LEN_VAL     0x02	/* SNS_LEN field is valid */
+#define	FCP_RSP_LEN_VAL     0x01	/* RSP_LEN field is valid */
+
+/*
+ * rsp_codes
+ */
+enum fcp_resp_rsp_codes {
+	FCP_TMF_CMPL = 0,
+	FCP_DATA_LEN_INVALID = 1,
+	FCP_CMND_FIELDS_INVALID = 2,
+	FCP_DATA_PARAM_MISMATCH = 3,
+	FCP_TMF_REJECTED = 4,
+	FCP_TMF_FAILED = 5,
+	FCP_TMF_INVALID_LUN = 9,
+};
+
+/*
+ * FCP SRR Link Service request - Sequence Retransmission Request.
+ */
+struct fcp_srr {
+	__u8		srr_op;		/* opcode ELS_SRR */
+	__u8		srr_resvd[3];	/* opcode / reserved - must be zero */
+	__be16		srr_ox_id;	/* OX_ID of failed command */
+	__be16		srr_rx_id;	/* RX_ID of failed command */
+	__be32		srr_rel_off;	/* relative offset */
+	__u8		srr_r_ctl;	/* r_ctl for the information unit */
+	__u8		srr_resvd2[3];	/* reserved */
+};
+
+/*
+ * Feature bits in name server FC-4 Features object.
+ */
+#define	FCP_FEAT_TARG	(1 << 0)	/* target function supported */
+#define	FCP_FEAT_INIT	(1 << 1)	/* initiator function supported */
+
+#endif /* _FC_FCP_H_ */
diff --git a/include/scsi/fc/fc_fip.h b/include/scsi/fc/fc_fip.h
new file mode 100644
index 000000000..9710254fd
--- /dev/null
+++ b/include/scsi/fc/fc_fip.h
@@ -0,0 +1,293 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc.  All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _FC_FIP_H_
+#define _FC_FIP_H_
+
+#include <scsi/fc/fc_ns.h>
+
+/*
+ * This version is based on:
+ * http://www.t11.org/ftp/t11/pub/fc/bb-5/08-543v1.pdf
+ * and T11 FC-BB-6 13-091v5.pdf (December 2013 VN2VN proposal)
+ */
+
+#define FIP_DEF_PRI	128	/* default selection priority */
+#define FIP_DEF_FC_MAP	0x0efc00 /* default FCoE MAP (MAC OUI) value */
+#define FIP_DEF_FKA	8000	/* default FCF keep-alive/advert period (mS) */
+#define FIP_VN_KA_PERIOD 90000	/* required VN_port keep-alive period (mS) */
+#define FIP_FCF_FUZZ	100	/* random time added by FCF (mS) */
+
+/*
+ * VN2VN proposed-standard values.
+ */
+#define FIP_VN_FC_MAP	0x0efd00 /* MAC OUI for VN2VN use */
+#define FIP_VN_PROBE_WAIT 100	/* interval between VN2VN probes (ms) */
+#define FIP_VN_ANN_WAIT 400	/* interval between VN2VN announcements (ms) */
+#define FIP_VN_RLIM_INT 10000	/* interval between probes when rate limited */
+#define FIP_VN_RLIM_COUNT 10	/* number of probes before rate limiting */
+#define FIP_VN_BEACON_INT 8000	/* interval between VN2VN beacons */
+#define FIP_VN_BEACON_FUZZ 100	/* random time to add to beacon period (ms) */
+
+/*
+ * Multicast MAC addresses.  T11-adopted.
+ */
+#define FIP_ALL_FCOE_MACS	((__u8[6]) { 1, 0x10, 0x18, 1, 0, 0 })
+#define FIP_ALL_ENODE_MACS	((__u8[6]) { 1, 0x10, 0x18, 1, 0, 1 })
+#define FIP_ALL_FCF_MACS	((__u8[6]) { 1, 0x10, 0x18, 1, 0, 2 })
+#define FIP_ALL_VN2VN_MACS	((__u8[6]) { 1, 0x10, 0x18, 1, 0, 4 })
+#define FIP_ALL_P2P_MACS	((__u8[6]) { 1, 0x10, 0x18, 1, 0, 5 })
+
+#define FIP_VER		1		/* version for fip_header */
+
+struct fip_header {
+	__u8	fip_ver;		/* upper 4 bits are the version */
+	__u8	fip_resv1;		/* reserved */
+	__be16	fip_op;			/* operation code */
+	__u8	fip_resv2;		/* reserved */
+	__u8	fip_subcode;		/* lower 4 bits are sub-code */
+	__be16	fip_dl_len;		/* length of descriptors in words */
+	__be16	fip_flags;		/* header flags */
+} __attribute__((packed));
+
+#define FIP_VER_SHIFT	4
+#define FIP_VER_ENCAPS(v) ((v) << FIP_VER_SHIFT)
+#define FIP_VER_DECAPS(v) ((v) >> FIP_VER_SHIFT)
+#define FIP_BPW		4		/* bytes per word for lengths */
+
+/*
+ * fip_op.
+ */
+enum fip_opcode {
+	FIP_OP_DISC =	1,		/* discovery, advertisement, etc. */
+	FIP_OP_LS =	2,		/* Link Service request or reply */
+	FIP_OP_CTRL =	3,		/* Keep Alive / Link Reset */
+	FIP_OP_VLAN =	4,		/* VLAN discovery */
+	FIP_OP_VN2VN =	5,		/* VN2VN operation */
+	FIP_OP_VENDOR_MIN = 0xfff8,	/* min vendor-specific opcode */
+	FIP_OP_VENDOR_MAX = 0xfffe,	/* max vendor-specific opcode */
+};
+
+/*
+ * Subcodes for FIP_OP_DISC.
+ */
+enum fip_disc_subcode {
+	FIP_SC_SOL =	1,		/* solicitation */
+	FIP_SC_ADV =	2,		/* advertisement */
+};
+
+/*
+ * Subcodes for FIP_OP_LS.
+ */
+enum fip_trans_subcode {
+	FIP_SC_REQ =	1,		/* request */
+	FIP_SC_REP =	2,		/* reply */
+};
+
+/*
+ * Subcodes for FIP_OP_RESET.
+ */
+enum fip_reset_subcode {
+	FIP_SC_KEEP_ALIVE = 1,		/* keep-alive from VN_Port */
+	FIP_SC_CLR_VLINK = 2,		/* clear virtual link from VF_Port */
+};
+
+/*
+ * Subcodes for FIP_OP_VLAN.
+ */
+enum fip_vlan_subcode {
+	FIP_SC_VL_REQ =	1,		/* vlan request */
+	FIP_SC_VL_NOTE = 2,		/* vlan notification */
+	FIP_SC_VL_VN2VN_NOTE = 3,	/* VN2VN vlan notification */
+};
+
+/*
+ * Subcodes for FIP_OP_VN2VN.
+ */
+enum fip_vn2vn_subcode {
+	FIP_SC_VN_PROBE_REQ = 1,	/* probe request */
+	FIP_SC_VN_PROBE_REP = 2,	/* probe reply */
+	FIP_SC_VN_CLAIM_NOTIFY = 3,	/* claim notification */
+	FIP_SC_VN_CLAIM_REP = 4,	/* claim response */
+	FIP_SC_VN_BEACON = 5,		/* beacon */
+};
+
+/*
+ * flags in header fip_flags.
+ */
+enum fip_flag {
+	FIP_FL_FPMA =	0x8000,		/* supports FPMA fabric-provided MACs */
+	FIP_FL_SPMA =	0x4000,		/* supports SPMA server-provided MACs */
+	FIP_FL_FCF =	0x0020,		/* originated from a controlling FCF */
+	FIP_FL_FDF =	0x0010,		/* originated from an FDF */
+	FIP_FL_REC_OR_P2P = 0x0008,	/* configured addr or point-to-point */
+	FIP_FL_AVAIL =	0x0004,		/* available for FLOGI/ELP */
+	FIP_FL_SOL =	0x0002,		/* this is a solicited message */
+	FIP_FL_FPORT =	0x0001,		/* sent from an F port */
+};
+
+/*
+ * Common descriptor header format.
+ */
+struct fip_desc {
+	__u8	fip_dtype;		/* type - see below */
+	__u8	fip_dlen;		/* length - in 32-bit words */
+};
+
+enum fip_desc_type {
+	FIP_DT_PRI =	1,		/* priority for forwarder selection */
+	FIP_DT_MAC =	2,		/* MAC address */
+	FIP_DT_MAP_OUI = 3,		/* FC-MAP OUI */
+	FIP_DT_NAME =	4,		/* switch name or node name */
+	FIP_DT_FAB =	5,		/* fabric descriptor */
+	FIP_DT_FCOE_SIZE = 6,		/* max FCoE frame size */
+	FIP_DT_FLOGI =	7,		/* FLOGI request or response */
+	FIP_DT_FDISC =	8,		/* FDISC request or response */
+	FIP_DT_LOGO =	9,		/* LOGO request or response */
+	FIP_DT_ELP =	10,		/* ELP request or response */
+	FIP_DT_VN_ID =	11,		/* VN_Node Identifier */
+	FIP_DT_FKA =	12,		/* advertisement keep-alive period */
+	FIP_DT_VENDOR =	13,		/* vendor ID */
+	FIP_DT_VLAN =	14,		/* vlan number */
+	FIP_DT_FC4F =	15,		/* FC-4 features */
+	FIP_DT_LIMIT,			/* max defined desc_type + 1 */
+	FIP_DT_NON_CRITICAL = 128,	/* First non-critical descriptor */
+	FIP_DT_CLR_VLINKS = 128,	/* Clear virtual links reason code */
+	FIP_DT_VENDOR_BASE = 241,	/* first vendor-specific desc_type */
+};
+
+/*
+ * FIP_DT_PRI - priority descriptor.
+ */
+struct fip_pri_desc {
+	struct fip_desc fd_desc;
+	__u8		fd_resvd;
+	__u8		fd_pri;		/* FCF priority:  higher is better */
+} __attribute__((packed));
+
+/*
+ * FIP_DT_MAC - MAC address descriptor.
+ */
+struct fip_mac_desc {
+	struct fip_desc fd_desc;
+	__u8		fd_mac[ETH_ALEN];
+} __attribute__((packed));
+
+/*
+ * FIP_DT_MAP - descriptor.
+ */
+struct fip_map_desc {
+	struct fip_desc fd_desc;
+	__u8		fd_resvd[3];
+	__u8		fd_map[3];
+} __attribute__((packed));
+
+/*
+ * FIP_DT_NAME descriptor.
+ */
+struct fip_wwn_desc {
+	struct fip_desc fd_desc;
+	__u8		fd_resvd[2];
+	__be64		fd_wwn;		/* 64-bit WWN, unaligned */
+} __attribute__((packed));
+
+/*
+ * FIP_DT_FAB descriptor.
+ */
+struct fip_fab_desc {
+	struct fip_desc fd_desc;
+	__be16		fd_vfid;	/* virtual fabric ID */
+	__u8		fd_resvd;
+	__u8		fd_map[3];	/* FC-MAP value */
+	__be64		fd_wwn;		/* fabric name, unaligned */
+} __attribute__((packed));
+
+/*
+ * FIP_DT_FCOE_SIZE descriptor.
+ */
+struct fip_size_desc {
+	struct fip_desc fd_desc;
+	__be16		fd_size;
+} __attribute__((packed));
+
+/*
+ * Descriptor that encapsulates an ELS or ILS frame.
+ * The encapsulated frame immediately follows this header, without
+ * SOF, EOF, or CRC.
+ */
+struct fip_encaps {
+	struct fip_desc fd_desc;
+	__u8		fd_resvd[2];
+} __attribute__((packed));
+
+/*
+ * FIP_DT_VN_ID - VN_Node Identifier descriptor.
+ */
+struct fip_vn_desc {
+	struct fip_desc fd_desc;
+	__u8		fd_mac[ETH_ALEN];
+	__u8		fd_resvd;
+	__u8		fd_fc_id[3];
+	__be64		fd_wwpn;	/* port name, unaligned */
+} __attribute__((packed));
+
+/*
+ * FIP_DT_FKA - Advertisement keep-alive period.
+ */
+struct fip_fka_desc {
+	struct fip_desc fd_desc;
+	__u8		fd_resvd;
+	__u8		fd_flags;	/* bit0 is fka disable flag */
+	__be32		fd_fka_period;	/* adv./keep-alive period in mS */
+} __attribute__((packed));
+
+/*
+ * flags for fip_fka_desc.fd_flags
+ */
+enum fip_fka_flags {
+	FIP_FKA_ADV_D =	0x01,		/* no need for FKA from ENode */
+};
+
+/* FIP_DT_FKA flags */
+
+/*
+ * FIP_DT_VLAN descriptor
+ */
+struct fip_vlan_desc {
+	struct fip_desc fd_desc;
+	__be16		fd_vlan; /* Note: highest 4 bytes are unused */
+} __attribute__((packed));
+
+/*
+ * FIP_DT_FC4F - FC-4 features.
+ */
+struct fip_fc4_feat {
+	struct fip_desc fd_desc;
+	__u8		fd_resvd[2];
+	struct fc_ns_fts fd_fts;
+	struct fc_ns_ff	fd_ff;
+} __attribute__((packed));
+
+/*
+ * FIP_DT_VENDOR descriptor.
+ */
+struct fip_vendor_desc {
+	struct fip_desc fd_desc;
+	__u8		fd_resvd[2];
+	__u8		fd_vendor_id[8];
+} __attribute__((packed));
+
+#endif /* _FC_FIP_H_ */
diff --git a/include/scsi/fc/fc_ms.h b/include/scsi/fc/fc_ms.h
new file mode 100644
index 000000000..f52b921b5
--- /dev/null
+++ b/include/scsi/fc/fc_ms.h
@@ -0,0 +1,213 @@
+/* * Copyright(c) 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_MS_H_
+#define	_FC_MS_H_
+
+#include <linux/types.h>
+
+/*
+ * Fibre Channel Services - Management Service (MS)
+ * From T11.org FC-GS-4 Rev 7.91 February 4, 2004
+ */
+
+/*
+ * Fabric Device Management Interface
+ */
+
+/*
+ * Common-transport sub-type for FDMI
+ */
+#define	FC_FDMI_SUBTYPE	    0x10 /* fs_ct_hdr.ct_fs_subtype */
+
+/*
+ * Management server FDMI Requests.
+ */
+enum fc_fdmi_req {
+	FC_FDMI_GRHL = 0x0100,	/* Get Registered HBA List */
+	FC_FDMI_GHAT = 0x0101,	/* Get HBA Attributes */
+	FC_FDMI_GRPL = 0x0102,	/* Get Registered Port List */
+	FC_FDMI_GPAT = 0x0110,	/* Get Port Attributes */
+	FC_FDMI_RHBA = 0x0200,	/* Register HBA */
+	FC_FDMI_RHAT = 0x0201,	/* Register HBA Attributes */
+	FC_FDMI_RPRT = 0x0210,	/* Register Port */
+	FC_FDMI_RPA = 0x0211,	/* Register Port Attributes */
+	FC_FDMI_DHBA = 0x0300,	/* Deregister HBA */
+	FC_FDMI_DHAT = 0x0301,	/* Deregister HBA Attributes */
+	FC_FDMI_DPRT = 0x0310,	/* Deregister Port */
+	FC_FDMI_DPA = 0x0311,	/* Deregister Port Attributes */
+};
+
+/*
+ * HBA Attribute Entry Type
+ */
+enum fc_fdmi_hba_attr_type {
+	FC_FDMI_HBA_ATTR_NODENAME = 0x0001,
+	FC_FDMI_HBA_ATTR_MANUFACTURER = 0x0002,
+	FC_FDMI_HBA_ATTR_SERIALNUMBER = 0x0003,
+	FC_FDMI_HBA_ATTR_MODEL = 0x0004,
+	FC_FDMI_HBA_ATTR_MODELDESCRIPTION = 0x0005,
+	FC_FDMI_HBA_ATTR_HARDWAREVERSION = 0x0006,
+	FC_FDMI_HBA_ATTR_DRIVERVERSION = 0x0007,
+	FC_FDMI_HBA_ATTR_OPTIONROMVERSION = 0x0008,
+	FC_FDMI_HBA_ATTR_FIRMWAREVERSION = 0x0009,
+	FC_FDMI_HBA_ATTR_OSNAMEVERSION = 0x000A,
+	FC_FDMI_HBA_ATTR_MAXCTPAYLOAD = 0x000B,
+};
+
+/*
+ * HBA Attribute Length
+ */
+#define FC_FDMI_HBA_ATTR_NODENAME_LEN		8
+#define FC_FDMI_HBA_ATTR_MANUFACTURER_LEN	64
+#define FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN	64
+#define FC_FDMI_HBA_ATTR_MODEL_LEN		256
+#define FC_FDMI_HBA_ATTR_MODELDESCR_LEN		256
+#define FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN	256
+#define FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN	256
+#define FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN	256
+#define FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN	256
+#define FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN	256
+#define FC_FDMI_HBA_ATTR_MAXCTPAYLOAD_LEN	4
+
+/*
+ * Port Attribute Type
+ */
+enum fc_fdmi_port_attr_type {
+	FC_FDMI_PORT_ATTR_FC4TYPES = 0x0001,
+	FC_FDMI_PORT_ATTR_SUPPORTEDSPEED = 0x0002,
+	FC_FDMI_PORT_ATTR_CURRENTPORTSPEED = 0x0003,
+	FC_FDMI_PORT_ATTR_MAXFRAMESIZE = 0x0004,
+	FC_FDMI_PORT_ATTR_OSDEVICENAME = 0x0005,
+	FC_FDMI_PORT_ATTR_HOSTNAME = 0x0006,
+};
+
+/*
+ * Port Attribute Length
+ */
+#define FC_FDMI_PORT_ATTR_FC4TYPES_LEN		32
+#define FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN	4
+#define FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN	4
+#define FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN	4
+#define FC_FDMI_PORT_ATTR_OSDEVICENAME_LEN	256
+#define FC_FDMI_PORT_ATTR_HOSTNAME_LEN		256
+
+/*
+ * HBA Attribute ID
+ */
+struct fc_fdmi_hba_identifier {
+	__be64		id;
+};
+
+/*
+ * Port Name
+ */
+struct fc_fdmi_port_name {
+	__be64		portname;
+};
+
+/*
+ * Attribute Entry Block for HBA/Port Attributes
+ */
+#define FC_FDMI_ATTR_ENTRY_HEADER_LEN	4
+struct fc_fdmi_attr_entry {
+	__be16		type;
+	__be16		len;
+	__u8		value[1];
+} __attribute__((__packed__));
+
+/*
+ * Common for HBA/Port Attributes
+ */
+struct fs_fdmi_attrs {
+	__be32				numattrs;
+	struct fc_fdmi_attr_entry	attr[1];
+} __attribute__((__packed__));
+
+/*
+ * Registered Port List
+ */
+struct fc_fdmi_rpl {
+	__be32				numport;
+	struct fc_fdmi_port_name	port[1];
+} __attribute__((__packed__));
+
+/*
+ * Register HBA (RHBA)
+ */
+struct fc_fdmi_rhba {
+	struct fc_fdmi_hba_identifier hbaid;
+	struct fc_fdmi_rpl		 port;
+	struct fs_fdmi_attrs		 hba_attrs;
+} __attribute__((__packed__));
+
+/*
+ * Register HBA Attributes (RHAT)
+ */
+struct fc_fdmi_rhat {
+	struct fc_fdmi_hba_identifier hbaid;
+	struct fs_fdmi_attrs		 hba_attrs;
+} __attribute__((__packed__));
+
+/*
+ * Register Port (RPRT)
+ */
+struct fc_fdmi_rprt {
+	struct fc_fdmi_hba_identifier hbaid;
+	struct fc_fdmi_port_name	 port;
+	struct fs_fdmi_attrs		 hba_attrs;
+} __attribute__((__packed__));
+
+/*
+ * Register Port Attributes (RPA)
+ */
+struct fc_fdmi_rpa {
+	struct fc_fdmi_port_name	 port;
+	struct fs_fdmi_attrs		 hba_attrs;
+} __attribute__((__packed__));
+
+/*
+ * Deregister Port (DPRT)
+ */
+struct fc_fdmi_dprt {
+	struct fc_fdmi_port_name	 port;
+} __attribute__((__packed__));
+
+/*
+ * Deregister Port Attributes (DPA)
+ */
+struct fc_fdmi_dpa {
+	struct fc_fdmi_port_name	 port;
+	struct fs_fdmi_attrs		 hba_attrs;
+} __attribute__((__packed__));
+
+/*
+ * Deregister HBA Attributes (DHAT)
+ */
+struct fc_fdmi_dhat {
+	struct fc_fdmi_hba_identifier hbaid;
+} __attribute__((__packed__));
+
+/*
+ * Deregister HBA (DHBA)
+ */
+struct fc_fdmi_dhba {
+	struct fc_fdmi_hba_identifier hbaid;
+} __attribute__((__packed__));
+
+#endif /* _FC_MS_H_ */
diff --git a/include/scsi/fc_encode.h b/include/scsi/fc_encode.h
new file mode 100644
index 000000000..35fd4744f
--- /dev/null
+++ b/include/scsi/fc_encode.h
@@ -0,0 +1,739 @@
+/*
+ * Copyright(c) 2008 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_ENCODE_H_
+#define _FC_ENCODE_H_
+#include <asm/unaligned.h>
+#include <linux/utsname.h>
+
+/*
+ * F_CTL values for simple requests and responses.
+ */
+#define FC_FCTL_REQ	(FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT)
+#define FC_FCTL_RESP	(FC_FC_EX_CTX | FC_FC_LAST_SEQ | \
+			FC_FC_END_SEQ | FC_FC_SEQ_INIT)
+
+struct fc_ns_rft {
+	struct fc_ns_fid fid;	/* port ID object */
+	struct fc_ns_fts fts;	/* FC4-types object */
+};
+
+struct fc_ct_req {
+	struct fc_ct_hdr hdr;
+	union {
+		struct fc_ns_gid_ft gid;
+		struct fc_ns_rn_id  rn;
+		struct fc_ns_rft rft;
+		struct fc_ns_rff_id rff;
+		struct fc_ns_fid fid;
+		struct fc_ns_rsnn snn;
+		struct fc_ns_rspn spn;
+		struct fc_fdmi_rhba rhba;
+		struct fc_fdmi_rpa  rpa;
+		struct fc_fdmi_dprt dprt;
+		struct fc_fdmi_dhba dhba;
+	} payload;
+};
+
+static inline void __fc_fill_fc_hdr(struct fc_frame_header *fh,
+				    enum fc_rctl r_ctl,
+				    u32 did, u32 sid, enum fc_fh_type type,
+				    u32 f_ctl, u32 parm_offset)
+{
+	WARN_ON(r_ctl == 0);
+	fh->fh_r_ctl = r_ctl;
+	hton24(fh->fh_d_id, did);
+	hton24(fh->fh_s_id, sid);
+	fh->fh_type = type;
+	hton24(fh->fh_f_ctl, f_ctl);
+	fh->fh_cs_ctl = 0;
+	fh->fh_df_ctl = 0;
+	fh->fh_parm_offset = htonl(parm_offset);
+}
+
+/**
+ * fill FC header fields in specified fc_frame
+ */
+static inline void fc_fill_fc_hdr(struct fc_frame *fp, enum fc_rctl r_ctl,
+				  u32 did, u32 sid, enum fc_fh_type type,
+				  u32 f_ctl, u32 parm_offset)
+{
+	struct fc_frame_header *fh;
+
+	fh = fc_frame_header_get(fp);
+	__fc_fill_fc_hdr(fh, r_ctl, did, sid, type, f_ctl, parm_offset);
+}
+
+/**
+ * fc_adisc_fill() - Fill in adisc request frame
+ * @lport: local port.
+ * @fp: fc frame where payload will be placed.
+ */
+static inline void fc_adisc_fill(struct fc_lport *lport, struct fc_frame *fp)
+{
+	struct fc_els_adisc *adisc;
+
+	adisc = fc_frame_payload_get(fp, sizeof(*adisc));
+	memset(adisc, 0, sizeof(*adisc));
+	adisc->adisc_cmd = ELS_ADISC;
+	put_unaligned_be64(lport->wwpn, &adisc->adisc_wwpn);
+	put_unaligned_be64(lport->wwnn, &adisc->adisc_wwnn);
+	hton24(adisc->adisc_port_id, lport->port_id);
+}
+
+/**
+ * fc_ct_hdr_fill- fills ct header and reset ct payload
+ * returns pointer to ct request.
+ */
+static inline struct fc_ct_req *fc_ct_hdr_fill(const struct fc_frame *fp,
+					       unsigned int op, size_t req_size,
+					       enum fc_ct_fs_type fs_type,
+					       u8 subtype)
+{
+	struct fc_ct_req *ct;
+	size_t ct_plen;
+
+	ct_plen  = sizeof(struct fc_ct_hdr) + req_size;
+	ct = fc_frame_payload_get(fp, ct_plen);
+	memset(ct, 0, ct_plen);
+	ct->hdr.ct_rev = FC_CT_REV;
+	ct->hdr.ct_fs_type = fs_type;
+	ct->hdr.ct_fs_subtype = subtype;
+	ct->hdr.ct_cmd = htons((u16) op);
+	return ct;
+}
+
+/**
+ * fc_ct_ns_fill() - Fill in a name service request frame
+ * @lport: local port.
+ * @fc_id: FC_ID of non-destination rport for GPN_ID and similar inquiries.
+ * @fp: frame to contain payload.
+ * @op: CT opcode.
+ * @r_ctl: pointer to FC header R_CTL.
+ * @fh_type: pointer to FC-4 type.
+ */
+static inline int fc_ct_ns_fill(struct fc_lport *lport,
+		      u32 fc_id, struct fc_frame *fp,
+		      unsigned int op, enum fc_rctl *r_ctl,
+		      enum fc_fh_type *fh_type)
+{
+	struct fc_ct_req *ct;
+	size_t len;
+
+	switch (op) {
+	case FC_NS_GPN_FT:
+		ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_gid_ft),
+				    FC_FST_DIR, FC_NS_SUBTYPE);
+		ct->payload.gid.fn_fc4_type = FC_TYPE_FCP;
+		break;
+
+	case FC_NS_GPN_ID:
+		ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_fid),
+				    FC_FST_DIR, FC_NS_SUBTYPE);
+		ct->payload.gid.fn_fc4_type = FC_TYPE_FCP;
+		hton24(ct->payload.fid.fp_fid, fc_id);
+		break;
+
+	case FC_NS_RFT_ID:
+		ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rft),
+				    FC_FST_DIR, FC_NS_SUBTYPE);
+		hton24(ct->payload.rft.fid.fp_fid, lport->port_id);
+		ct->payload.rft.fts = lport->fcts;
+		break;
+
+	case FC_NS_RFF_ID:
+		ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rff_id),
+				    FC_FST_DIR, FC_NS_SUBTYPE);
+		hton24(ct->payload.rff.fr_fid.fp_fid, lport->port_id);
+		ct->payload.rff.fr_type = FC_TYPE_FCP;
+		if (lport->service_params & FCP_SPPF_INIT_FCN)
+			ct->payload.rff.fr_feat = FCP_FEAT_INIT;
+		if (lport->service_params & FCP_SPPF_TARG_FCN)
+			ct->payload.rff.fr_feat |= FCP_FEAT_TARG;
+		break;
+
+	case FC_NS_RNN_ID:
+		ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rn_id),
+				    FC_FST_DIR, FC_NS_SUBTYPE);
+		hton24(ct->payload.rn.fr_fid.fp_fid, lport->port_id);
+		put_unaligned_be64(lport->wwnn, &ct->payload.rn.fr_wwn);
+		break;
+
+	case FC_NS_RSPN_ID:
+		len = strnlen(fc_host_symbolic_name(lport->host), 255);
+		ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rspn) + len,
+				    FC_FST_DIR, FC_NS_SUBTYPE);
+		hton24(ct->payload.spn.fr_fid.fp_fid, lport->port_id);
+		strncpy(ct->payload.spn.fr_name,
+			fc_host_symbolic_name(lport->host), len);
+		ct->payload.spn.fr_name_len = len;
+		break;
+
+	case FC_NS_RSNN_NN:
+		len = strnlen(fc_host_symbolic_name(lport->host), 255);
+		ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rsnn) + len,
+				    FC_FST_DIR, FC_NS_SUBTYPE);
+		put_unaligned_be64(lport->wwnn, &ct->payload.snn.fr_wwn);
+		strncpy(ct->payload.snn.fr_name,
+			fc_host_symbolic_name(lport->host), len);
+		ct->payload.snn.fr_name_len = len;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	*r_ctl = FC_RCTL_DD_UNSOL_CTL;
+	*fh_type = FC_TYPE_CT;
+	return 0;
+}
+
+/**
+ * fc_ct_ms_fill() - Fill in a mgmt service request frame
+ * @lport: local port.
+ * @fc_id: FC_ID of non-destination rport for GPN_ID and similar inquiries.
+ * @fp: frame to contain payload.
+ * @op: CT opcode.
+ * @r_ctl: pointer to FC header R_CTL.
+ * @fh_type: pointer to FC-4 type.
+ */
+static inline int fc_ct_ms_fill(struct fc_lport *lport,
+		      u32 fc_id, struct fc_frame *fp,
+		      unsigned int op, enum fc_rctl *r_ctl,
+		      enum fc_fh_type *fh_type)
+{
+	struct fc_ct_req *ct;
+	size_t len;
+	struct fc_fdmi_attr_entry *entry;
+	struct fs_fdmi_attrs *hba_attrs;
+	int numattrs = 0;
+
+	switch (op) {
+	case FC_FDMI_RHBA:
+		numattrs = 10;
+		len = sizeof(struct fc_fdmi_rhba);
+		len -= sizeof(struct fc_fdmi_attr_entry);
+		len += (numattrs * FC_FDMI_ATTR_ENTRY_HEADER_LEN);
+		len += FC_FDMI_HBA_ATTR_NODENAME_LEN;
+		len += FC_FDMI_HBA_ATTR_MANUFACTURER_LEN;
+		len += FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN;
+		len += FC_FDMI_HBA_ATTR_MODEL_LEN;
+		len += FC_FDMI_HBA_ATTR_MODELDESCR_LEN;
+		len += FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN;
+		len += FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN;
+		len += FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN;
+		len += FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN;
+		len += FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN;
+		ct = fc_ct_hdr_fill(fp, op, len, FC_FST_MGMT,
+				    FC_FDMI_SUBTYPE);
+
+		/* HBA Identifier */
+		put_unaligned_be64(lport->wwpn, &ct->payload.rhba.hbaid.id);
+		/* Number of Ports - always 1 */
+		put_unaligned_be32(1, &ct->payload.rhba.port.numport);
+		/* Port Name */
+		put_unaligned_be64(lport->wwpn,
+				   &ct->payload.rhba.port.port[0].portname);
+
+		/* HBA Attributes */
+		put_unaligned_be32(numattrs,
+				   &ct->payload.rhba.hba_attrs.numattrs);
+		hba_attrs = &ct->payload.rhba.hba_attrs;
+		entry = (struct fc_fdmi_attr_entry *)hba_attrs->attr;
+		/* NodeName*/
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_NODENAME_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_NODENAME,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		put_unaligned_be64(lport->wwnn,
+				   (__be64 *)&entry->value[0]);
+
+		/* Manufacturer */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_HBA_ATTR_NODENAME_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_MANUFACTURER_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_MANUFACTURER,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		strncpy((char *)&entry->value,
+			fc_host_manufacturer(lport->host),
+			FC_FDMI_HBA_ATTR_MANUFACTURER_LEN);
+
+		/* SerialNumber */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_HBA_ATTR_MANUFACTURER_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_SERIALNUMBER,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		strncpy((char *)&entry->value,
+			fc_host_serial_number(lport->host),
+			FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN);
+
+		/* Model */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_MODEL_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_MODEL,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		strncpy((char *)&entry->value,
+			fc_host_model(lport->host),
+			FC_FDMI_HBA_ATTR_MODEL_LEN);
+
+		/* Model Description */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_HBA_ATTR_MODEL_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_MODELDESCR_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_MODELDESCRIPTION,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		strncpy((char *)&entry->value,
+			fc_host_model_description(lport->host),
+			FC_FDMI_HBA_ATTR_MODELDESCR_LEN);
+
+		/* Hardware Version */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_HBA_ATTR_MODELDESCR_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_HARDWAREVERSION,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		strncpy((char *)&entry->value,
+			fc_host_hardware_version(lport->host),
+			FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN);
+
+		/* Driver Version */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_DRIVERVERSION,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		strncpy((char *)&entry->value,
+			fc_host_driver_version(lport->host),
+			FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN);
+
+		/* OptionROM Version */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_OPTIONROMVERSION,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		strncpy((char *)&entry->value,
+			fc_host_optionrom_version(lport->host),
+			FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN);
+
+		/* Firmware Version */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_FIRMWAREVERSION,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		strncpy((char *)&entry->value,
+			fc_host_firmware_version(lport->host),
+			FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN);
+
+		/* OS Name and Version */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN;
+		put_unaligned_be16(FC_FDMI_HBA_ATTR_OSNAMEVERSION,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		snprintf((char *)&entry->value,
+			FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN,
+			"%s v%s",
+			init_utsname()->sysname,
+			init_utsname()->release);
+		break;
+	case FC_FDMI_RPA:
+		numattrs = 6;
+		len = sizeof(struct fc_fdmi_rpa);
+		len -= sizeof(struct fc_fdmi_attr_entry);
+		len += (numattrs * FC_FDMI_ATTR_ENTRY_HEADER_LEN);
+		len += FC_FDMI_PORT_ATTR_FC4TYPES_LEN;
+		len += FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN;
+		len += FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN;
+		len += FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN;
+		len += FC_FDMI_PORT_ATTR_OSDEVICENAME_LEN;
+		len += FC_FDMI_PORT_ATTR_HOSTNAME_LEN;
+		ct = fc_ct_hdr_fill(fp, op, len, FC_FST_MGMT,
+				    FC_FDMI_SUBTYPE);
+
+		/* Port Name */
+		put_unaligned_be64(lport->wwpn,
+				   &ct->payload.rpa.port.portname);
+
+		/* Port Attributes */
+		put_unaligned_be32(numattrs,
+				   &ct->payload.rpa.hba_attrs.numattrs);
+
+		hba_attrs = &ct->payload.rpa.hba_attrs;
+		entry = (struct fc_fdmi_attr_entry *)hba_attrs->attr;
+
+		/* FC4 types */
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_PORT_ATTR_FC4TYPES_LEN;
+		put_unaligned_be16(FC_FDMI_PORT_ATTR_FC4TYPES,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		memcpy(&entry->value, fc_host_supported_fc4s(lport->host),
+		       FC_FDMI_PORT_ATTR_FC4TYPES_LEN);
+
+		/* Supported Speed */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_PORT_ATTR_FC4TYPES_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN;
+		put_unaligned_be16(FC_FDMI_PORT_ATTR_SUPPORTEDSPEED,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+
+		put_unaligned_be32(fc_host_supported_speeds(lport->host),
+				   &entry->value);
+
+		/* Current Port Speed */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN;
+		put_unaligned_be16(FC_FDMI_PORT_ATTR_CURRENTPORTSPEED,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		put_unaligned_be32(lport->link_speed,
+				   &entry->value);
+
+		/* Max Frame Size */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN;
+		put_unaligned_be16(FC_FDMI_PORT_ATTR_MAXFRAMESIZE,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		put_unaligned_be32(fc_host_maxframe_size(lport->host),
+				   &entry->value);
+
+		/* OS Device Name */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_PORT_ATTR_OSDEVICENAME_LEN;
+		put_unaligned_be16(FC_FDMI_PORT_ATTR_OSDEVICENAME,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		/* Use the sysfs device name */
+		strncpy((char *)&entry->value,
+			dev_name(&lport->host->shost_gendev),
+			strnlen(dev_name(&lport->host->shost_gendev),
+				FC_FDMI_PORT_ATTR_HOSTNAME_LEN));
+
+		/* Host Name */
+		entry = (struct fc_fdmi_attr_entry *)((char *)entry->value +
+					FC_FDMI_PORT_ATTR_OSDEVICENAME_LEN);
+		len = FC_FDMI_ATTR_ENTRY_HEADER_LEN;
+		len += FC_FDMI_PORT_ATTR_HOSTNAME_LEN;
+		put_unaligned_be16(FC_FDMI_PORT_ATTR_HOSTNAME,
+				   &entry->type);
+		put_unaligned_be16(len, &entry->len);
+		if (strlen(fc_host_system_hostname(lport->host)))
+			strncpy((char *)&entry->value,
+				fc_host_system_hostname(lport->host),
+				strnlen(fc_host_system_hostname(lport->host),
+					FC_FDMI_PORT_ATTR_HOSTNAME_LEN));
+		else
+			strncpy((char *)&entry->value,
+				init_utsname()->nodename,
+				FC_FDMI_PORT_ATTR_HOSTNAME_LEN);
+		break;
+	case FC_FDMI_DPRT:
+		len = sizeof(struct fc_fdmi_dprt);
+		ct = fc_ct_hdr_fill(fp, op, len, FC_FST_MGMT,
+				    FC_FDMI_SUBTYPE);
+		/* Port Name */
+		put_unaligned_be64(lport->wwpn,
+				   &ct->payload.dprt.port.portname);
+		break;
+	case FC_FDMI_DHBA:
+		len = sizeof(struct fc_fdmi_dhba);
+		ct = fc_ct_hdr_fill(fp, op, len, FC_FST_MGMT,
+				    FC_FDMI_SUBTYPE);
+		/* HBA Identifier */
+		put_unaligned_be64(lport->wwpn, &ct->payload.dhba.hbaid.id);
+		break;
+	default:
+		return -EINVAL;
+	}
+	*r_ctl = FC_RCTL_DD_UNSOL_CTL;
+	*fh_type = FC_TYPE_CT;
+	return 0;
+}
+
+/**
+ * fc_ct_fill() - Fill in a common transport service request frame
+ * @lport: local port.
+ * @fc_id: FC_ID of non-destination rport for GPN_ID and similar inquiries.
+ * @fp: frame to contain payload.
+ * @op: CT opcode.
+ * @r_ctl: pointer to FC header R_CTL.
+ * @fh_type: pointer to FC-4 type.
+ */
+static inline int fc_ct_fill(struct fc_lport *lport,
+		      u32 fc_id, struct fc_frame *fp,
+		      unsigned int op, enum fc_rctl *r_ctl,
+		      enum fc_fh_type *fh_type, u32 *did)
+{
+	int rc = -EINVAL;
+
+	switch (fc_id) {
+	case FC_FID_MGMT_SERV:
+		rc = fc_ct_ms_fill(lport, fc_id, fp, op, r_ctl, fh_type);
+		*did = FC_FID_MGMT_SERV;
+		break;
+	case FC_FID_DIR_SERV:
+	default:
+		rc = fc_ct_ns_fill(lport, fc_id, fp, op, r_ctl, fh_type);
+		*did = FC_FID_DIR_SERV;
+		break;
+	}
+
+	return rc;
+}
+/**
+ * fc_plogi_fill - Fill in plogi request frame
+ */
+static inline void fc_plogi_fill(struct fc_lport *lport, struct fc_frame *fp,
+				 unsigned int op)
+{
+	struct fc_els_flogi *plogi;
+	struct fc_els_csp *csp;
+	struct fc_els_cssp *cp;
+
+	plogi = fc_frame_payload_get(fp, sizeof(*plogi));
+	memset(plogi, 0, sizeof(*plogi));
+	plogi->fl_cmd = (u8) op;
+	put_unaligned_be64(lport->wwpn, &plogi->fl_wwpn);
+	put_unaligned_be64(lport->wwnn, &plogi->fl_wwnn);
+
+	csp = &plogi->fl_csp;
+	csp->sp_hi_ver = 0x20;
+	csp->sp_lo_ver = 0x20;
+	csp->sp_bb_cred = htons(10);	/* this gets set by gateway */
+	csp->sp_bb_data = htons((u16) lport->mfs);
+	cp = &plogi->fl_cssp[3 - 1];	/* class 3 parameters */
+	cp->cp_class = htons(FC_CPC_VALID | FC_CPC_SEQ);
+	csp->sp_features = htons(FC_SP_FT_CIRO);
+	csp->sp_tot_seq = htons(255);	/* seq. we accept */
+	csp->sp_rel_off = htons(0x1f);
+	csp->sp_e_d_tov = htonl(lport->e_d_tov);
+
+	cp->cp_rdfs = htons((u16) lport->mfs);
+	cp->cp_con_seq = htons(255);
+	cp->cp_open_seq = 1;
+}
+
+/**
+ * fc_flogi_fill - Fill in a flogi request frame.
+ */
+static inline void fc_flogi_fill(struct fc_lport *lport, struct fc_frame *fp)
+{
+	struct fc_els_csp *sp;
+	struct fc_els_cssp *cp;
+	struct fc_els_flogi *flogi;
+
+	flogi = fc_frame_payload_get(fp, sizeof(*flogi));
+	memset(flogi, 0, sizeof(*flogi));
+	flogi->fl_cmd = (u8) ELS_FLOGI;
+	put_unaligned_be64(lport->wwpn, &flogi->fl_wwpn);
+	put_unaligned_be64(lport->wwnn, &flogi->fl_wwnn);
+	sp = &flogi->fl_csp;
+	sp->sp_hi_ver = 0x20;
+	sp->sp_lo_ver = 0x20;
+	sp->sp_bb_cred = htons(10);	/* this gets set by gateway */
+	sp->sp_bb_data = htons((u16) lport->mfs);
+	cp = &flogi->fl_cssp[3 - 1];	/* class 3 parameters */
+	cp->cp_class = htons(FC_CPC_VALID | FC_CPC_SEQ);
+	if (lport->does_npiv)
+		sp->sp_features = htons(FC_SP_FT_NPIV);
+}
+
+/**
+ * fc_fdisc_fill - Fill in a fdisc request frame.
+ */
+static inline void fc_fdisc_fill(struct fc_lport *lport, struct fc_frame *fp)
+{
+	struct fc_els_csp *sp;
+	struct fc_els_cssp *cp;
+	struct fc_els_flogi *fdisc;
+
+	fdisc = fc_frame_payload_get(fp, sizeof(*fdisc));
+	memset(fdisc, 0, sizeof(*fdisc));
+	fdisc->fl_cmd = (u8) ELS_FDISC;
+	put_unaligned_be64(lport->wwpn, &fdisc->fl_wwpn);
+	put_unaligned_be64(lport->wwnn, &fdisc->fl_wwnn);
+	sp = &fdisc->fl_csp;
+	sp->sp_hi_ver = 0x20;
+	sp->sp_lo_ver = 0x20;
+	sp->sp_bb_cred = htons(10);	/* this gets set by gateway */
+	sp->sp_bb_data = htons((u16) lport->mfs);
+	cp = &fdisc->fl_cssp[3 - 1];	/* class 3 parameters */
+	cp->cp_class = htons(FC_CPC_VALID | FC_CPC_SEQ);
+}
+
+/**
+ * fc_logo_fill - Fill in a logo request frame.
+ */
+static inline void fc_logo_fill(struct fc_lport *lport, struct fc_frame *fp)
+{
+	struct fc_els_logo *logo;
+
+	logo = fc_frame_payload_get(fp, sizeof(*logo));
+	memset(logo, 0, sizeof(*logo));
+	logo->fl_cmd = ELS_LOGO;
+	hton24(logo->fl_n_port_id, lport->port_id);
+	logo->fl_n_port_wwn = htonll(lport->wwpn);
+}
+
+/**
+ * fc_rtv_fill - Fill in RTV (read timeout value) request frame.
+ */
+static inline void fc_rtv_fill(struct fc_lport *lport, struct fc_frame *fp)
+{
+	struct fc_els_rtv *rtv;
+
+	rtv = fc_frame_payload_get(fp, sizeof(*rtv));
+	memset(rtv, 0, sizeof(*rtv));
+	rtv->rtv_cmd = ELS_RTV;
+}
+
+/**
+ * fc_rec_fill - Fill in rec request frame
+ */
+static inline void fc_rec_fill(struct fc_lport *lport, struct fc_frame *fp)
+{
+	struct fc_els_rec *rec;
+	struct fc_exch *ep = fc_seq_exch(fr_seq(fp));
+
+	rec = fc_frame_payload_get(fp, sizeof(*rec));
+	memset(rec, 0, sizeof(*rec));
+	rec->rec_cmd = ELS_REC;
+	hton24(rec->rec_s_id, lport->port_id);
+	rec->rec_ox_id = htons(ep->oxid);
+	rec->rec_rx_id = htons(ep->rxid);
+}
+
+/**
+ * fc_prli_fill - Fill in prli request frame
+ */
+static inline void fc_prli_fill(struct fc_lport *lport, struct fc_frame *fp)
+{
+	struct {
+		struct fc_els_prli prli;
+		struct fc_els_spp spp;
+	} *pp;
+
+	pp = fc_frame_payload_get(fp, sizeof(*pp));
+	memset(pp, 0, sizeof(*pp));
+	pp->prli.prli_cmd = ELS_PRLI;
+	pp->prli.prli_spp_len = sizeof(struct fc_els_spp);
+	pp->prli.prli_len = htons(sizeof(*pp));
+	pp->spp.spp_type = FC_TYPE_FCP;
+	pp->spp.spp_flags = FC_SPP_EST_IMG_PAIR;
+	pp->spp.spp_params = htonl(lport->service_params);
+}
+
+/**
+ * fc_scr_fill - Fill in a scr request frame.
+ */
+static inline void fc_scr_fill(struct fc_lport *lport, struct fc_frame *fp)
+{
+	struct fc_els_scr *scr;
+
+	scr = fc_frame_payload_get(fp, sizeof(*scr));
+	memset(scr, 0, sizeof(*scr));
+	scr->scr_cmd = ELS_SCR;
+	scr->scr_reg_func = ELS_SCRF_FULL;
+}
+
+/**
+ * fc_els_fill - Fill in an ELS  request frame
+ */
+static inline int fc_els_fill(struct fc_lport *lport,
+		       u32 did,
+		       struct fc_frame *fp, unsigned int op,
+		       enum fc_rctl *r_ctl, enum fc_fh_type *fh_type)
+{
+	switch (op) {
+	case ELS_ADISC:
+		fc_adisc_fill(lport, fp);
+		break;
+
+	case ELS_PLOGI:
+		fc_plogi_fill(lport, fp, ELS_PLOGI);
+		break;
+
+	case ELS_FLOGI:
+		fc_flogi_fill(lport, fp);
+		break;
+
+	case ELS_FDISC:
+		fc_fdisc_fill(lport, fp);
+		break;
+
+	case ELS_LOGO:
+		fc_logo_fill(lport, fp);
+		break;
+
+	case ELS_RTV:
+		fc_rtv_fill(lport, fp);
+		break;
+
+	case ELS_REC:
+		fc_rec_fill(lport, fp);
+		break;
+
+	case ELS_PRLI:
+		fc_prli_fill(lport, fp);
+		break;
+
+	case ELS_SCR:
+		fc_scr_fill(lport, fp);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	*r_ctl = FC_RCTL_ELS_REQ;
+	*fh_type = FC_TYPE_ELS;
+	return 0;
+}
+#endif /* _FC_ENCODE_H_ */
diff --git a/include/scsi/fc_frame.h b/include/scsi/fc_frame.h
new file mode 100644
index 000000000..8225d8063
--- /dev/null
+++ b/include/scsi/fc_frame.h
@@ -0,0 +1,261 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_FRAME_H_
+#define _FC_FRAME_H_
+
+#include <linux/scatterlist.h>
+#include <linux/skbuff.h>
+#include <scsi/scsi_cmnd.h>
+
+#include <scsi/fc/fc_fs.h>
+#include <scsi/fc/fc_fcp.h>
+#include <scsi/fc/fc_encaps.h>
+
+#include <linux/if_ether.h>
+
+/* some helpful macros */
+
+#define ntohll(x) be64_to_cpu(x)
+#define htonll(x) cpu_to_be64(x)
+
+static inline u32 ntoh24(const u8 *p)
+{
+	return (p[0] << 16) | (p[1] << 8) | p[2];
+}
+
+static inline void hton24(u8 *p, u32 v)
+{
+	p[0] = (v >> 16) & 0xff;
+	p[1] = (v >> 8) & 0xff;
+	p[2] = v & 0xff;
+}
+
+/*
+ * The fc_frame interface is used to pass frame data between functions.
+ * The frame includes the data buffer, length, and SOF / EOF delimiter types.
+ * A pointer to the port structure of the receiving port is also includeded.
+ */
+
+#define	FC_FRAME_HEADROOM	32	/* headroom for VLAN + FCoE headers */
+#define	FC_FRAME_TAILROOM	8	/* trailer space for FCoE */
+
+/* Max number of skb frags allowed, reserving one for fcoe_crc_eof page */
+#define FC_FRAME_SG_LEN		(MAX_SKB_FRAGS - 1)
+
+#define fp_skb(fp)	(&((fp)->skb))
+#define fr_hdr(fp)	((fp)->skb.data)
+#define fr_len(fp)	((fp)->skb.len)
+#define fr_cb(fp)	((struct fcoe_rcv_info *)&((fp)->skb.cb[0]))
+#define fr_dev(fp)	(fr_cb(fp)->fr_dev)
+#define fr_seq(fp)	(fr_cb(fp)->fr_seq)
+#define fr_sof(fp)	(fr_cb(fp)->fr_sof)
+#define fr_eof(fp)	(fr_cb(fp)->fr_eof)
+#define fr_flags(fp)	(fr_cb(fp)->fr_flags)
+#define fr_encaps(fp)	(fr_cb(fp)->fr_encaps)
+#define fr_max_payload(fp)	(fr_cb(fp)->fr_max_payload)
+#define fr_fsp(fp)	(fr_cb(fp)->fr_fsp)
+#define fr_crc(fp)	(fr_cb(fp)->fr_crc)
+
+struct fc_frame {
+	struct sk_buff skb;
+};
+
+struct fcoe_rcv_info {
+	struct fc_lport	*fr_dev;	/* transport layer private pointer */
+	struct fc_seq	*fr_seq;	/* for use with exchange manager */
+	struct fc_fcp_pkt *fr_fsp;	/* for the corresponding fcp I/O */
+	u32		fr_crc;
+	u16		fr_max_payload;	/* max FC payload */
+	u8		fr_sof;		/* start of frame delimiter */
+	u8		fr_eof;		/* end of frame delimiter */
+	u8		fr_flags;	/* flags - see below */
+	u8		fr_encaps;	/* LLD encapsulation info (e.g. FIP) */
+	u8		granted_mac[ETH_ALEN]; /* FCoE MAC address */
+};
+
+
+/*
+ * Get fc_frame pointer for an skb that's already been imported.
+ */
+static inline struct fcoe_rcv_info *fcoe_dev_from_skb(const struct sk_buff *skb)
+{
+	BUILD_BUG_ON(sizeof(struct fcoe_rcv_info) > sizeof(skb->cb));
+	return (struct fcoe_rcv_info *) skb->cb;
+}
+
+/*
+ * fr_flags.
+ */
+#define	FCPHF_CRC_UNCHECKED	0x01	/* CRC not computed, still appended */
+
+/*
+ * Initialize a frame.
+ * We don't do a complete memset here for performance reasons.
+ * The caller must set fr_free, fr_hdr, fr_len, fr_sof, and fr_eof eventually.
+ */
+static inline void fc_frame_init(struct fc_frame *fp)
+{
+	fr_dev(fp) = NULL;
+	fr_seq(fp) = NULL;
+	fr_flags(fp) = 0;
+	fr_encaps(fp) = 0;
+}
+
+struct fc_frame *fc_frame_alloc_fill(struct fc_lport *, size_t payload_len);
+struct fc_frame *_fc_frame_alloc(size_t payload_len);
+
+/*
+ * Allocate fc_frame structure and buffer.  Set the initial length to
+ * payload_size + sizeof (struct fc_frame_header).
+ */
+static inline struct fc_frame *fc_frame_alloc(struct fc_lport *dev, size_t len)
+{
+	struct fc_frame *fp;
+
+	/*
+	 * Note: Since len will often be a constant multiple of 4,
+	 * this check will usually be evaluated and eliminated at compile time.
+	 */
+	if (len && len % 4)
+		fp = fc_frame_alloc_fill(dev, len);
+	else
+		fp = _fc_frame_alloc(len);
+	return fp;
+}
+
+/*
+ * Free the fc_frame structure and buffer.
+ */
+static inline void fc_frame_free(struct fc_frame *fp)
+{
+	kfree_skb(fp_skb(fp));
+}
+
+static inline int fc_frame_is_linear(struct fc_frame *fp)
+{
+	return !skb_is_nonlinear(fp_skb(fp));
+}
+
+/*
+ * Get frame header from message in fc_frame structure.
+ * This version doesn't do a length check.
+ */
+static inline
+struct fc_frame_header *__fc_frame_header_get(const struct fc_frame *fp)
+{
+	return (struct fc_frame_header *)fr_hdr(fp);
+}
+
+/*
+ * Get frame header from message in fc_frame structure.
+ * This hides a cast and provides a place to add some checking.
+ */
+static inline
+struct fc_frame_header *fc_frame_header_get(const struct fc_frame *fp)
+{
+	WARN_ON(fr_len(fp) < sizeof(struct fc_frame_header));
+	return __fc_frame_header_get(fp);
+}
+
+/*
+ * Get source FC_ID (S_ID) from frame header in message.
+ */
+static inline u32 fc_frame_sid(const struct fc_frame *fp)
+{
+	return ntoh24(__fc_frame_header_get(fp)->fh_s_id);
+}
+
+/*
+ * Get destination FC_ID (D_ID) from frame header in message.
+ */
+static inline u32 fc_frame_did(const struct fc_frame *fp)
+{
+	return ntoh24(__fc_frame_header_get(fp)->fh_d_id);
+}
+
+/*
+ * Get frame payload from message in fc_frame structure.
+ * This hides a cast and provides a place to add some checking.
+ * The len parameter is the minimum length for the payload portion.
+ * Returns NULL if the frame is too short.
+ *
+ * This assumes the interesting part of the payload is in the first part
+ * of the buffer for received data.  This may not be appropriate to use for
+ * buffers being transmitted.
+ */
+static inline void *fc_frame_payload_get(const struct fc_frame *fp,
+					 size_t len)
+{
+	void *pp = NULL;
+
+	if (fr_len(fp) >= sizeof(struct fc_frame_header) + len)
+		pp = fc_frame_header_get(fp) + 1;
+	return pp;
+}
+
+/*
+ * Get frame payload opcode (first byte) from message in fc_frame structure.
+ * This hides a cast and provides a place to add some checking. Return 0
+ * if the frame has no payload.
+ */
+static inline u8 fc_frame_payload_op(const struct fc_frame *fp)
+{
+	u8 *cp;
+
+	cp = fc_frame_payload_get(fp, sizeof(u8));
+	if (!cp)
+		return 0;
+	return *cp;
+
+}
+
+/*
+ * Get FC class from frame.
+ */
+static inline enum fc_class fc_frame_class(const struct fc_frame *fp)
+{
+	return fc_sof_class(fr_sof(fp));
+}
+
+/*
+ * Check the CRC in a frame.
+ * The CRC immediately follows the last data item *AFTER* the length.
+ * The return value is zero if the CRC matches.
+ */
+u32 fc_frame_crc_check(struct fc_frame *);
+
+static inline u8 fc_frame_rctl(const struct fc_frame *fp)
+{
+	return fc_frame_header_get(fp)->fh_r_ctl;
+}
+
+static inline bool fc_frame_is_cmd(const struct fc_frame *fp)
+{
+	return fc_frame_rctl(fp) == FC_RCTL_DD_UNSOL_CMD;
+}
+
+/*
+ * Check for leaks.
+ * Print the frame header of any currently allocated frame, assuming there
+ * should be none at this point.
+ */
+void fc_frame_leak_check(void);
+
+#endif /* _FC_FRAME_H_ */
diff --git a/include/scsi/fcoe_sysfs.h b/include/scsi/fcoe_sysfs.h
new file mode 100644
index 000000000..7e2314870
--- /dev/null
+++ b/include/scsi/fcoe_sysfs.h
@@ -0,0 +1,133 @@
+/*
+ * Copyright (c) 2011-2012 Intel Corporation.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef FCOE_SYSFS
+#define FCOE_SYSFS
+
+#include <linux/if_ether.h>
+#include <linux/device.h>
+#include <scsi/fc/fc_fcoe.h>
+
+struct fcoe_ctlr_device;
+struct fcoe_fcf_device;
+
+struct fcoe_sysfs_function_template {
+	void (*get_fcoe_ctlr_link_fail)(struct fcoe_ctlr_device *);
+	void (*get_fcoe_ctlr_vlink_fail)(struct fcoe_ctlr_device *);
+	void (*get_fcoe_ctlr_miss_fka)(struct fcoe_ctlr_device *);
+	void (*get_fcoe_ctlr_symb_err)(struct fcoe_ctlr_device *);
+	void (*get_fcoe_ctlr_err_block)(struct fcoe_ctlr_device *);
+	void (*get_fcoe_ctlr_fcs_error)(struct fcoe_ctlr_device *);
+	void (*set_fcoe_ctlr_mode)(struct fcoe_ctlr_device *);
+	int  (*set_fcoe_ctlr_enabled)(struct fcoe_ctlr_device *);
+	void (*get_fcoe_fcf_selected)(struct fcoe_fcf_device *);
+	void (*get_fcoe_fcf_vlan_id)(struct fcoe_fcf_device *);
+};
+
+#define dev_to_ctlr(d)					\
+	container_of((d), struct fcoe_ctlr_device, dev)
+
+enum fip_conn_type {
+	FIP_CONN_TYPE_UNKNOWN,
+	FIP_CONN_TYPE_FABRIC,
+	FIP_CONN_TYPE_VN2VN,
+};
+
+enum ctlr_enabled_state {
+	FCOE_CTLR_ENABLED,
+	FCOE_CTLR_DISABLED,
+	FCOE_CTLR_UNUSED,
+};
+
+struct fcoe_ctlr_device {
+	u32				id;
+
+	struct device			dev;
+	struct fcoe_sysfs_function_template *f;
+
+	struct list_head		fcfs;
+	char				work_q_name[20];
+	struct workqueue_struct		*work_q;
+	char				devloss_work_q_name[20];
+	struct workqueue_struct		*devloss_work_q;
+	struct mutex			lock;
+
+	int                             fcf_dev_loss_tmo;
+	enum fip_conn_type              mode;
+
+	enum ctlr_enabled_state         enabled;
+
+	/* expected in host order for displaying */
+	struct fcoe_fc_els_lesb         lesb;
+};
+
+static inline void *fcoe_ctlr_device_priv(const struct fcoe_ctlr_device *ctlr)
+{
+	return (void *)(ctlr + 1);
+}
+
+/* fcf states */
+enum fcf_state {
+	FCOE_FCF_STATE_UNKNOWN,
+	FCOE_FCF_STATE_DISCONNECTED,
+	FCOE_FCF_STATE_CONNECTED,
+	FCOE_FCF_STATE_DELETED,
+};
+
+struct fcoe_fcf_device {
+	u32		    id;
+	struct device	    dev;
+	struct list_head    peers;
+	struct work_struct  delete_work;
+	struct delayed_work dev_loss_work;
+	u32		    dev_loss_tmo;
+	void                *priv;
+	enum fcf_state      state;
+
+	u64                 fabric_name;
+	u64                 switch_name;
+	u32                 fc_map;
+	u16                 vfid;
+	u8                  mac[ETH_ALEN];
+	u8                  priority;
+	u32                 fka_period;
+	u8                  selected;
+	u16                 vlan_id;
+};
+
+#define dev_to_fcf(d)					\
+	container_of((d), struct fcoe_fcf_device, dev)
+/* parentage should never be missing */
+#define fcoe_fcf_dev_to_ctlr_dev(x)		\
+	dev_to_ctlr((x)->dev.parent)
+#define fcoe_fcf_device_priv(x)			\
+	((x)->priv)
+
+struct fcoe_ctlr_device *fcoe_ctlr_device_add(struct device *parent,
+			    struct fcoe_sysfs_function_template *f,
+			    int priv_size);
+void fcoe_ctlr_device_delete(struct fcoe_ctlr_device *);
+struct fcoe_fcf_device *fcoe_fcf_device_add(struct fcoe_ctlr_device *,
+					    struct fcoe_fcf_device *);
+void fcoe_fcf_device_delete(struct fcoe_fcf_device *);
+
+int __init fcoe_sysfs_setup(void);
+void __exit fcoe_sysfs_teardown(void);
+
+#endif /* FCOE_SYSFS */
diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h
new file mode 100644
index 000000000..d66c07077
--- /dev/null
+++ b/include/scsi/iscsi_if.h
@@ -0,0 +1,964 @@
+/*
+ * iSCSI User/Kernel Shares (Defines, Constants, Protocol definitions, etc)
+ *
+ * Copyright (C) 2005 Dmitry Yusupov
+ * Copyright (C) 2005 Alex Aizman
+ * maintained by open-iscsi@googlegroups.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * See the file COPYING included with this distribution for more details.
+ */
+
+#ifndef ISCSI_IF_H
+#define ISCSI_IF_H
+
+#include <scsi/iscsi_proto.h>
+#include <linux/in.h>
+#include <linux/in6.h>
+
+#define ISCSI_NL_GRP_ISCSID	1
+#define ISCSI_NL_GRP_UIP	2
+
+#define UEVENT_BASE			10
+#define KEVENT_BASE			100
+#define ISCSI_ERR_BASE			1000
+
+enum iscsi_uevent_e {
+	ISCSI_UEVENT_UNKNOWN		= 0,
+
+	/* down events */
+	ISCSI_UEVENT_CREATE_SESSION	= UEVENT_BASE + 1,
+	ISCSI_UEVENT_DESTROY_SESSION	= UEVENT_BASE + 2,
+	ISCSI_UEVENT_CREATE_CONN	= UEVENT_BASE + 3,
+	ISCSI_UEVENT_DESTROY_CONN	= UEVENT_BASE + 4,
+	ISCSI_UEVENT_BIND_CONN		= UEVENT_BASE + 5,
+	ISCSI_UEVENT_SET_PARAM		= UEVENT_BASE + 6,
+	ISCSI_UEVENT_START_CONN		= UEVENT_BASE + 7,
+	ISCSI_UEVENT_STOP_CONN		= UEVENT_BASE + 8,
+	ISCSI_UEVENT_SEND_PDU		= UEVENT_BASE + 9,
+	ISCSI_UEVENT_GET_STATS		= UEVENT_BASE + 10,
+	ISCSI_UEVENT_GET_PARAM		= UEVENT_BASE + 11,
+
+	ISCSI_UEVENT_TRANSPORT_EP_CONNECT	= UEVENT_BASE + 12,
+	ISCSI_UEVENT_TRANSPORT_EP_POLL		= UEVENT_BASE + 13,
+	ISCSI_UEVENT_TRANSPORT_EP_DISCONNECT	= UEVENT_BASE + 14,
+
+	ISCSI_UEVENT_TGT_DSCVR		= UEVENT_BASE + 15,
+	ISCSI_UEVENT_SET_HOST_PARAM	= UEVENT_BASE + 16,
+	ISCSI_UEVENT_UNBIND_SESSION	= UEVENT_BASE + 17,
+	ISCSI_UEVENT_CREATE_BOUND_SESSION		= UEVENT_BASE + 18,
+	ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST	= UEVENT_BASE + 19,
+
+	ISCSI_UEVENT_PATH_UPDATE	= UEVENT_BASE + 20,
+	ISCSI_UEVENT_SET_IFACE_PARAMS	= UEVENT_BASE + 21,
+	ISCSI_UEVENT_PING		= UEVENT_BASE + 22,
+	ISCSI_UEVENT_GET_CHAP		= UEVENT_BASE + 23,
+	ISCSI_UEVENT_DELETE_CHAP	= UEVENT_BASE + 24,
+	ISCSI_UEVENT_SET_FLASHNODE_PARAMS	= UEVENT_BASE + 25,
+	ISCSI_UEVENT_NEW_FLASHNODE	= UEVENT_BASE + 26,
+	ISCSI_UEVENT_DEL_FLASHNODE	= UEVENT_BASE + 27,
+	ISCSI_UEVENT_LOGIN_FLASHNODE	= UEVENT_BASE + 28,
+	ISCSI_UEVENT_LOGOUT_FLASHNODE	= UEVENT_BASE + 29,
+	ISCSI_UEVENT_LOGOUT_FLASHNODE_SID	= UEVENT_BASE + 30,
+	ISCSI_UEVENT_SET_CHAP		= UEVENT_BASE + 31,
+	ISCSI_UEVENT_GET_HOST_STATS	= UEVENT_BASE + 32,
+
+	/* up events */
+	ISCSI_KEVENT_RECV_PDU		= KEVENT_BASE + 1,
+	ISCSI_KEVENT_CONN_ERROR		= KEVENT_BASE + 2,
+	ISCSI_KEVENT_IF_ERROR		= KEVENT_BASE + 3,
+	ISCSI_KEVENT_DESTROY_SESSION	= KEVENT_BASE + 4,
+	ISCSI_KEVENT_UNBIND_SESSION	= KEVENT_BASE + 5,
+	ISCSI_KEVENT_CREATE_SESSION	= KEVENT_BASE + 6,
+
+	ISCSI_KEVENT_PATH_REQ		= KEVENT_BASE + 7,
+	ISCSI_KEVENT_IF_DOWN		= KEVENT_BASE + 8,
+	ISCSI_KEVENT_CONN_LOGIN_STATE   = KEVENT_BASE + 9,
+	ISCSI_KEVENT_HOST_EVENT		= KEVENT_BASE + 10,
+	ISCSI_KEVENT_PING_COMP		= KEVENT_BASE + 11,
+};
+
+enum iscsi_tgt_dscvr {
+	ISCSI_TGT_DSCVR_SEND_TARGETS	= 1,
+	ISCSI_TGT_DSCVR_ISNS		= 2,
+	ISCSI_TGT_DSCVR_SLP		= 3,
+};
+
+enum iscsi_host_event_code {
+	ISCSI_EVENT_LINKUP		= 1,
+	ISCSI_EVENT_LINKDOWN,
+	/* must always be last */
+	ISCSI_EVENT_MAX,
+};
+
+struct iscsi_uevent {
+	uint32_t type; /* k/u events type */
+	uint32_t iferror; /* carries interface or resource errors */
+	uint64_t transport_handle;
+
+	union {
+		/* messages u -> k */
+		struct msg_create_session {
+			uint32_t	initial_cmdsn;
+			uint16_t	cmds_max;
+			uint16_t	queue_depth;
+		} c_session;
+		struct msg_create_bound_session {
+			uint64_t	ep_handle;
+			uint32_t	initial_cmdsn;
+			uint16_t	cmds_max;
+			uint16_t	queue_depth;
+		} c_bound_session;
+		struct msg_destroy_session {
+			uint32_t	sid;
+		} d_session;
+		struct msg_create_conn {
+			uint32_t	sid;
+			uint32_t	cid;
+		} c_conn;
+		struct msg_bind_conn {
+			uint32_t	sid;
+			uint32_t	cid;
+			uint64_t	transport_eph;
+			uint32_t	is_leading;
+		} b_conn;
+		struct msg_destroy_conn {
+			uint32_t	sid;
+			uint32_t	cid;
+		} d_conn;
+		struct msg_send_pdu {
+			uint32_t	sid;
+			uint32_t	cid;
+			uint32_t	hdr_size;
+			uint32_t	data_size;
+		} send_pdu;
+		struct msg_set_param {
+			uint32_t	sid;
+			uint32_t	cid;
+			uint32_t	param; /* enum iscsi_param */
+			uint32_t	len;
+		} set_param;
+		struct msg_start_conn {
+			uint32_t	sid;
+			uint32_t	cid;
+		} start_conn;
+		struct msg_stop_conn {
+			uint32_t	sid;
+			uint32_t	cid;
+			uint64_t	conn_handle;
+			uint32_t	flag;
+		} stop_conn;
+		struct msg_get_stats {
+			uint32_t	sid;
+			uint32_t	cid;
+		} get_stats;
+		struct msg_transport_connect {
+			uint32_t	non_blocking;
+		} ep_connect;
+		struct msg_transport_connect_through_host {
+			uint32_t	host_no;
+			uint32_t	non_blocking;
+		} ep_connect_through_host;
+		struct msg_transport_poll {
+			uint64_t	ep_handle;
+			uint32_t	timeout_ms;
+		} ep_poll;
+		struct msg_transport_disconnect {
+			uint64_t	ep_handle;
+		} ep_disconnect;
+		struct msg_tgt_dscvr {
+			enum iscsi_tgt_dscvr	type;
+			uint32_t	host_no;
+			/*
+ 			 * enable = 1 to establish a new connection
+			 * with the server. enable = 0 to disconnect
+			 * from the server. Used primarily to switch
+			 * from one iSNS server to another.
+			 */
+			uint32_t	enable;
+		} tgt_dscvr;
+		struct msg_set_host_param {
+			uint32_t	host_no;
+			uint32_t	param; /* enum iscsi_host_param */
+			uint32_t	len;
+		} set_host_param;
+		struct msg_set_path {
+			uint32_t	host_no;
+		} set_path;
+		struct msg_set_iface_params {
+			uint32_t	host_no;
+			uint32_t	count;
+		} set_iface_params;
+		struct msg_iscsi_ping {
+			uint32_t        host_no;
+			uint32_t        iface_num;
+			uint32_t        iface_type;
+			uint32_t        payload_size;
+			uint32_t	pid;	/* unique ping id associated
+						   with each ping request */
+		} iscsi_ping;
+		struct msg_get_chap {
+			uint32_t	host_no;
+			uint32_t	num_entries; /* number of CHAP entries
+						      * on request, number of
+						      * valid CHAP entries on
+						      * response */
+			uint16_t	chap_tbl_idx;
+		} get_chap;
+		struct msg_delete_chap {
+		       uint32_t        host_no;
+		       uint16_t        chap_tbl_idx;
+		} delete_chap;
+		struct msg_set_flashnode_param {
+			uint32_t	host_no;
+			uint32_t	flashnode_idx;
+			uint32_t	count;
+		} set_flashnode;
+		struct msg_new_flashnode {
+			uint32_t	host_no;
+			uint32_t	len;
+		} new_flashnode;
+		struct msg_del_flashnode {
+			uint32_t	host_no;
+			uint32_t	flashnode_idx;
+		} del_flashnode;
+		struct msg_login_flashnode {
+			uint32_t	host_no;
+			uint32_t	flashnode_idx;
+		} login_flashnode;
+		struct msg_logout_flashnode {
+			uint32_t	host_no;
+			uint32_t	flashnode_idx;
+		} logout_flashnode;
+		struct msg_logout_flashnode_sid {
+			uint32_t	host_no;
+			uint32_t	sid;
+		} logout_flashnode_sid;
+		struct msg_get_host_stats {
+			uint32_t host_no;
+		} get_host_stats;
+	} u;
+	union {
+		/* messages k -> u */
+		int			retcode;
+		struct msg_create_session_ret {
+			uint32_t	sid;
+			uint32_t	host_no;
+		} c_session_ret;
+		struct msg_create_conn_ret {
+			uint32_t	sid;
+			uint32_t	cid;
+		} c_conn_ret;
+		struct msg_unbind_session {
+			uint32_t	sid;
+			uint32_t	host_no;
+		} unbind_session;
+		struct msg_recv_req {
+			uint32_t	sid;
+			uint32_t	cid;
+			uint64_t	recv_handle;
+		} recv_req;
+		struct msg_conn_login {
+			uint32_t        sid;
+			uint32_t        cid;
+			uint32_t        state; /* enum iscsi_conn_state */
+		} conn_login;
+		struct msg_conn_error {
+			uint32_t	sid;
+			uint32_t	cid;
+			uint32_t	error; /* enum iscsi_err */
+		} connerror;
+		struct msg_session_destroyed {
+			uint32_t	host_no;
+			uint32_t	sid;
+		} d_session;
+		struct msg_transport_connect_ret {
+			uint64_t	handle;
+		} ep_connect_ret;
+		struct msg_req_path {
+			uint32_t	host_no;
+		} req_path;
+		struct msg_notify_if_down {
+			uint32_t	host_no;
+		} notify_if_down;
+		struct msg_host_event {
+			uint32_t	host_no;
+			uint32_t	data_size;
+			enum iscsi_host_event_code code;
+		} host_event;
+		struct msg_ping_comp {
+			uint32_t        host_no;
+			uint32_t        status; /* enum
+						 * iscsi_ping_status_code */
+			uint32_t	pid;	/* unique ping id associated
+						   with each ping request */
+			uint32_t        data_size;
+		} ping_comp;
+		struct msg_new_flashnode_ret {
+			uint32_t	flashnode_idx;
+		} new_flashnode_ret;
+	} r;
+} __attribute__ ((aligned (sizeof(uint64_t))));
+
+enum iscsi_param_type {
+	ISCSI_PARAM,		/* iscsi_param (session, conn, target, LU) */
+	ISCSI_HOST_PARAM,	/* iscsi_host_param */
+	ISCSI_NET_PARAM,	/* iscsi_net_param */
+	ISCSI_FLASHNODE_PARAM,	/* iscsi_flashnode_param */
+	ISCSI_CHAP_PARAM,	/* iscsi_chap_param */
+	ISCSI_IFACE_PARAM,	/* iscsi_iface_param */
+};
+
+/* structure for minimalist usecase */
+struct iscsi_param_info {
+	uint32_t len;		/* Actual length of the param value */
+	uint16_t param;		/* iscsi param */
+	uint8_t value[0];	/* length sized value follows */
+} __packed;
+
+struct iscsi_iface_param_info {
+	uint32_t iface_num;	/* iface number, 0 - n */
+	uint32_t len;		/* Actual length of the param */
+	uint16_t param;		/* iscsi param value */
+	uint8_t iface_type;	/* IPv4 or IPv6 */
+	uint8_t param_type;	/* iscsi_param_type */
+	uint8_t value[0];	/* length sized value follows */
+} __packed;
+
+/*
+ * To keep the struct iscsi_uevent size the same for userspace code
+ * compatibility, the main structure for ISCSI_UEVENT_PATH_UPDATE and
+ * ISCSI_KEVENT_PATH_REQ is defined separately and comes after the
+ * struct iscsi_uevent in the NETLINK_ISCSI message.
+ */
+struct iscsi_path {
+	uint64_t	handle;
+	uint8_t		mac_addr[6];
+	uint8_t		mac_addr_old[6];
+	uint32_t	ip_addr_len;	/* 4 or 16 */
+	union {
+		struct in_addr	v4_addr;
+		struct in6_addr	v6_addr;
+	} src;
+	union {
+		struct in_addr	v4_addr;
+		struct in6_addr	v6_addr;
+	} dst;
+	uint16_t	vlan_id;
+	uint16_t	pmtu;
+} __attribute__ ((aligned (sizeof(uint64_t))));
+
+/* iscsi iface enabled/disabled setting */
+#define ISCSI_IFACE_DISABLE	0x01
+#define ISCSI_IFACE_ENABLE	0x02
+
+/* ipv4 bootproto */
+#define ISCSI_BOOTPROTO_STATIC		0x01
+#define ISCSI_BOOTPROTO_DHCP		0x02
+
+/* ipv6 addr autoconfig type */
+#define ISCSI_IPV6_AUTOCFG_DISABLE		0x01
+#define ISCSI_IPV6_AUTOCFG_ND_ENABLE		0x02
+#define ISCSI_IPV6_AUTOCFG_DHCPV6_ENABLE	0x03
+
+/* ipv6 link local addr type */
+#define ISCSI_IPV6_LINKLOCAL_AUTOCFG_ENABLE	0x01
+#define ISCSI_IPV6_LINKLOCAL_AUTOCFG_DISABLE	0x02
+
+/* ipv6 router addr type */
+#define ISCSI_IPV6_ROUTER_AUTOCFG_ENABLE	0x01
+#define ISCSI_IPV6_ROUTER_AUTOCFG_DISABLE	0x02
+
+#define ISCSI_IFACE_TYPE_IPV4		0x01
+#define ISCSI_IFACE_TYPE_IPV6		0x02
+
+#define ISCSI_MAX_VLAN_ID		4095
+#define ISCSI_MAX_VLAN_PRIORITY		7
+
+/* iscsi vlan enable/disabled setting */
+#define ISCSI_VLAN_DISABLE	0x01
+#define ISCSI_VLAN_ENABLE	0x02
+
+/* iscsi generic enable/disabled setting for various features */
+#define ISCSI_NET_PARAM_DISABLE		0x01
+#define ISCSI_NET_PARAM_ENABLE		0x02
+
+/* iSCSI network params */
+enum iscsi_net_param {
+	ISCSI_NET_PARAM_IPV4_ADDR		= 1,
+	ISCSI_NET_PARAM_IPV4_SUBNET,
+	ISCSI_NET_PARAM_IPV4_GW,
+	ISCSI_NET_PARAM_IPV4_BOOTPROTO,
+	ISCSI_NET_PARAM_MAC,
+	ISCSI_NET_PARAM_IPV6_LINKLOCAL,
+	ISCSI_NET_PARAM_IPV6_ADDR,
+	ISCSI_NET_PARAM_IPV6_ROUTER,
+	ISCSI_NET_PARAM_IPV6_ADDR_AUTOCFG,
+	ISCSI_NET_PARAM_IPV6_LINKLOCAL_AUTOCFG,
+	ISCSI_NET_PARAM_IPV6_ROUTER_AUTOCFG,
+	ISCSI_NET_PARAM_IFACE_ENABLE,
+	ISCSI_NET_PARAM_VLAN_ID,
+	ISCSI_NET_PARAM_VLAN_PRIORITY,
+	ISCSI_NET_PARAM_VLAN_ENABLED,
+	ISCSI_NET_PARAM_VLAN_TAG,
+	ISCSI_NET_PARAM_IFACE_TYPE,
+	ISCSI_NET_PARAM_IFACE_NAME,
+	ISCSI_NET_PARAM_MTU,
+	ISCSI_NET_PARAM_PORT,
+	ISCSI_NET_PARAM_IPADDR_STATE,
+	ISCSI_NET_PARAM_IPV6_LINKLOCAL_STATE,
+	ISCSI_NET_PARAM_IPV6_ROUTER_STATE,
+	ISCSI_NET_PARAM_DELAYED_ACK_EN,
+	ISCSI_NET_PARAM_TCP_NAGLE_DISABLE,
+	ISCSI_NET_PARAM_TCP_WSF_DISABLE,
+	ISCSI_NET_PARAM_TCP_WSF,
+	ISCSI_NET_PARAM_TCP_TIMER_SCALE,
+	ISCSI_NET_PARAM_TCP_TIMESTAMP_EN,
+	ISCSI_NET_PARAM_CACHE_ID,
+	ISCSI_NET_PARAM_IPV4_DHCP_DNS_ADDR_EN,
+	ISCSI_NET_PARAM_IPV4_DHCP_SLP_DA_EN,
+	ISCSI_NET_PARAM_IPV4_TOS_EN,
+	ISCSI_NET_PARAM_IPV4_TOS,
+	ISCSI_NET_PARAM_IPV4_GRAT_ARP_EN,
+	ISCSI_NET_PARAM_IPV4_DHCP_ALT_CLIENT_ID_EN,
+	ISCSI_NET_PARAM_IPV4_DHCP_ALT_CLIENT_ID,
+	ISCSI_NET_PARAM_IPV4_DHCP_REQ_VENDOR_ID_EN,
+	ISCSI_NET_PARAM_IPV4_DHCP_USE_VENDOR_ID_EN,
+	ISCSI_NET_PARAM_IPV4_DHCP_VENDOR_ID,
+	ISCSI_NET_PARAM_IPV4_DHCP_LEARN_IQN_EN,
+	ISCSI_NET_PARAM_IPV4_FRAGMENT_DISABLE,
+	ISCSI_NET_PARAM_IPV4_IN_FORWARD_EN,
+	ISCSI_NET_PARAM_IPV4_TTL,
+	ISCSI_NET_PARAM_IPV6_GRAT_NEIGHBOR_ADV_EN,
+	ISCSI_NET_PARAM_IPV6_MLD_EN,
+	ISCSI_NET_PARAM_IPV6_FLOW_LABEL,
+	ISCSI_NET_PARAM_IPV6_TRAFFIC_CLASS,
+	ISCSI_NET_PARAM_IPV6_HOP_LIMIT,
+	ISCSI_NET_PARAM_IPV6_ND_REACHABLE_TMO,
+	ISCSI_NET_PARAM_IPV6_ND_REXMIT_TIME,
+	ISCSI_NET_PARAM_IPV6_ND_STALE_TMO,
+	ISCSI_NET_PARAM_IPV6_DUP_ADDR_DETECT_CNT,
+	ISCSI_NET_PARAM_IPV6_RTR_ADV_LINK_MTU,
+	ISCSI_NET_PARAM_REDIRECT_EN,
+};
+
+enum iscsi_ipaddress_state {
+	ISCSI_IPDDRESS_STATE_UNCONFIGURED,
+	ISCSI_IPDDRESS_STATE_ACQUIRING,
+	ISCSI_IPDDRESS_STATE_TENTATIVE,
+	ISCSI_IPDDRESS_STATE_VALID,
+	ISCSI_IPDDRESS_STATE_DISABLING,
+	ISCSI_IPDDRESS_STATE_INVALID,
+	ISCSI_IPDDRESS_STATE_DEPRECATED,
+};
+
+enum iscsi_router_state {
+	ISCSI_ROUTER_STATE_UNKNOWN,
+	ISCSI_ROUTER_STATE_ADVERTISED,
+	ISCSI_ROUTER_STATE_MANUAL,
+	ISCSI_ROUTER_STATE_STALE,
+};
+
+/* iSCSI specific settings params for iface */
+enum iscsi_iface_param {
+	ISCSI_IFACE_PARAM_DEF_TASKMGMT_TMO,
+	ISCSI_IFACE_PARAM_HDRDGST_EN,
+	ISCSI_IFACE_PARAM_DATADGST_EN,
+	ISCSI_IFACE_PARAM_IMM_DATA_EN,
+	ISCSI_IFACE_PARAM_INITIAL_R2T_EN,
+	ISCSI_IFACE_PARAM_DATASEQ_INORDER_EN,
+	ISCSI_IFACE_PARAM_PDU_INORDER_EN,
+	ISCSI_IFACE_PARAM_ERL,
+	ISCSI_IFACE_PARAM_MAX_RECV_DLENGTH,
+	ISCSI_IFACE_PARAM_FIRST_BURST,
+	ISCSI_IFACE_PARAM_MAX_R2T,
+	ISCSI_IFACE_PARAM_MAX_BURST,
+	ISCSI_IFACE_PARAM_CHAP_AUTH_EN,
+	ISCSI_IFACE_PARAM_BIDI_CHAP_EN,
+	ISCSI_IFACE_PARAM_DISCOVERY_AUTH_OPTIONAL,
+	ISCSI_IFACE_PARAM_DISCOVERY_LOGOUT_EN,
+	ISCSI_IFACE_PARAM_STRICT_LOGIN_COMP_EN,
+	ISCSI_IFACE_PARAM_INITIATOR_NAME,
+};
+
+enum iscsi_conn_state {
+	ISCSI_CONN_STATE_FREE,
+	ISCSI_CONN_STATE_XPT_WAIT,
+	ISCSI_CONN_STATE_IN_LOGIN,
+	ISCSI_CONN_STATE_LOGGED_IN,
+	ISCSI_CONN_STATE_IN_LOGOUT,
+	ISCSI_CONN_STATE_LOGOUT_REQUESTED,
+	ISCSI_CONN_STATE_CLEANUP_WAIT,
+};
+
+/*
+ * Common error codes
+ */
+enum iscsi_err {
+	ISCSI_OK			= 0,
+
+	ISCSI_ERR_DATASN		= ISCSI_ERR_BASE + 1,
+	ISCSI_ERR_DATA_OFFSET		= ISCSI_ERR_BASE + 2,
+	ISCSI_ERR_MAX_CMDSN		= ISCSI_ERR_BASE + 3,
+	ISCSI_ERR_EXP_CMDSN		= ISCSI_ERR_BASE + 4,
+	ISCSI_ERR_BAD_OPCODE		= ISCSI_ERR_BASE + 5,
+	ISCSI_ERR_DATALEN		= ISCSI_ERR_BASE + 6,
+	ISCSI_ERR_AHSLEN		= ISCSI_ERR_BASE + 7,
+	ISCSI_ERR_PROTO			= ISCSI_ERR_BASE + 8,
+	ISCSI_ERR_LUN			= ISCSI_ERR_BASE + 9,
+	ISCSI_ERR_BAD_ITT		= ISCSI_ERR_BASE + 10,
+	ISCSI_ERR_CONN_FAILED		= ISCSI_ERR_BASE + 11,
+	ISCSI_ERR_R2TSN			= ISCSI_ERR_BASE + 12,
+	ISCSI_ERR_SESSION_FAILED	= ISCSI_ERR_BASE + 13,
+	ISCSI_ERR_HDR_DGST		= ISCSI_ERR_BASE + 14,
+	ISCSI_ERR_DATA_DGST		= ISCSI_ERR_BASE + 15,
+	ISCSI_ERR_PARAM_NOT_FOUND	= ISCSI_ERR_BASE + 16,
+	ISCSI_ERR_NO_SCSI_CMD		= ISCSI_ERR_BASE + 17,
+	ISCSI_ERR_INVALID_HOST		= ISCSI_ERR_BASE + 18,
+	ISCSI_ERR_XMIT_FAILED		= ISCSI_ERR_BASE + 19,
+	ISCSI_ERR_TCP_CONN_CLOSE	= ISCSI_ERR_BASE + 20,
+	ISCSI_ERR_SCSI_EH_SESSION_RST	= ISCSI_ERR_BASE + 21,
+	ISCSI_ERR_NOP_TIMEDOUT		= ISCSI_ERR_BASE + 22,
+};
+
+/*
+ * iSCSI Parameters (RFC3720)
+ */
+enum iscsi_param {
+	/* passed in using netlink set param */
+	ISCSI_PARAM_MAX_RECV_DLENGTH,
+	ISCSI_PARAM_MAX_XMIT_DLENGTH,
+	ISCSI_PARAM_HDRDGST_EN,
+	ISCSI_PARAM_DATADGST_EN,
+	ISCSI_PARAM_INITIAL_R2T_EN,
+	ISCSI_PARAM_MAX_R2T,
+	ISCSI_PARAM_IMM_DATA_EN,
+	ISCSI_PARAM_FIRST_BURST,
+	ISCSI_PARAM_MAX_BURST,
+	ISCSI_PARAM_PDU_INORDER_EN,
+	ISCSI_PARAM_DATASEQ_INORDER_EN,
+	ISCSI_PARAM_ERL,
+	ISCSI_PARAM_IFMARKER_EN,
+	ISCSI_PARAM_OFMARKER_EN,
+	ISCSI_PARAM_EXP_STATSN,
+	ISCSI_PARAM_TARGET_NAME,
+	ISCSI_PARAM_TPGT,
+	ISCSI_PARAM_PERSISTENT_ADDRESS,
+	ISCSI_PARAM_PERSISTENT_PORT,
+	ISCSI_PARAM_SESS_RECOVERY_TMO,
+
+	/* passed in through bind conn using transport_fd */
+	ISCSI_PARAM_CONN_PORT,
+	ISCSI_PARAM_CONN_ADDRESS,
+
+	ISCSI_PARAM_USERNAME,
+	ISCSI_PARAM_USERNAME_IN,
+	ISCSI_PARAM_PASSWORD,
+	ISCSI_PARAM_PASSWORD_IN,
+
+	ISCSI_PARAM_FAST_ABORT,
+	ISCSI_PARAM_ABORT_TMO,
+	ISCSI_PARAM_LU_RESET_TMO,
+	ISCSI_PARAM_HOST_RESET_TMO,
+
+	ISCSI_PARAM_PING_TMO,
+	ISCSI_PARAM_RECV_TMO,
+
+	ISCSI_PARAM_IFACE_NAME,
+	ISCSI_PARAM_ISID,
+	ISCSI_PARAM_INITIATOR_NAME,
+
+	ISCSI_PARAM_TGT_RESET_TMO,
+	ISCSI_PARAM_TARGET_ALIAS,
+
+	ISCSI_PARAM_CHAP_IN_IDX,
+	ISCSI_PARAM_CHAP_OUT_IDX,
+
+	ISCSI_PARAM_BOOT_ROOT,
+	ISCSI_PARAM_BOOT_NIC,
+	ISCSI_PARAM_BOOT_TARGET,
+
+	ISCSI_PARAM_AUTO_SND_TGT_DISABLE,
+	ISCSI_PARAM_DISCOVERY_SESS,
+	ISCSI_PARAM_PORTAL_TYPE,
+	ISCSI_PARAM_CHAP_AUTH_EN,
+	ISCSI_PARAM_DISCOVERY_LOGOUT_EN,
+	ISCSI_PARAM_BIDI_CHAP_EN,
+	ISCSI_PARAM_DISCOVERY_AUTH_OPTIONAL,
+
+	ISCSI_PARAM_DEF_TIME2WAIT,
+	ISCSI_PARAM_DEF_TIME2RETAIN,
+	ISCSI_PARAM_MAX_SEGMENT_SIZE,
+	ISCSI_PARAM_STATSN,
+	ISCSI_PARAM_KEEPALIVE_TMO,
+	ISCSI_PARAM_LOCAL_PORT,
+	ISCSI_PARAM_TSID,
+	ISCSI_PARAM_DEF_TASKMGMT_TMO,
+
+	ISCSI_PARAM_TCP_TIMESTAMP_STAT,
+	ISCSI_PARAM_TCP_WSF_DISABLE,
+	ISCSI_PARAM_TCP_NAGLE_DISABLE,
+	ISCSI_PARAM_TCP_TIMER_SCALE,
+	ISCSI_PARAM_TCP_TIMESTAMP_EN,
+	ISCSI_PARAM_TCP_XMIT_WSF,
+	ISCSI_PARAM_TCP_RECV_WSF,
+	ISCSI_PARAM_IP_FRAGMENT_DISABLE,
+	ISCSI_PARAM_IPV4_TOS,
+	ISCSI_PARAM_IPV6_TC,
+	ISCSI_PARAM_IPV6_FLOW_LABEL,
+	ISCSI_PARAM_IS_FW_ASSIGNED_IPV6,
+
+	ISCSI_PARAM_DISCOVERY_PARENT_IDX,
+	ISCSI_PARAM_DISCOVERY_PARENT_TYPE,
+	ISCSI_PARAM_LOCAL_IPADDR,
+	/* must always be last */
+	ISCSI_PARAM_MAX,
+};
+
+/* iSCSI HBA params */
+enum iscsi_host_param {
+	ISCSI_HOST_PARAM_HWADDRESS,
+	ISCSI_HOST_PARAM_INITIATOR_NAME,
+	ISCSI_HOST_PARAM_NETDEV_NAME,
+	ISCSI_HOST_PARAM_IPADDRESS,
+	ISCSI_HOST_PARAM_PORT_STATE,
+	ISCSI_HOST_PARAM_PORT_SPEED,
+	ISCSI_HOST_PARAM_MAX,
+};
+
+/* portal type */
+#define PORTAL_TYPE_IPV4	"ipv4"
+#define PORTAL_TYPE_IPV6	"ipv6"
+
+/* iSCSI Flash Target params */
+enum iscsi_flashnode_param {
+	ISCSI_FLASHNODE_IS_FW_ASSIGNED_IPV6,
+	ISCSI_FLASHNODE_PORTAL_TYPE,
+	ISCSI_FLASHNODE_AUTO_SND_TGT_DISABLE,
+	ISCSI_FLASHNODE_DISCOVERY_SESS,
+	ISCSI_FLASHNODE_ENTRY_EN,
+	ISCSI_FLASHNODE_HDR_DGST_EN,
+	ISCSI_FLASHNODE_DATA_DGST_EN,
+	ISCSI_FLASHNODE_IMM_DATA_EN,
+	ISCSI_FLASHNODE_INITIAL_R2T_EN,
+	ISCSI_FLASHNODE_DATASEQ_INORDER,
+	ISCSI_FLASHNODE_PDU_INORDER,
+	ISCSI_FLASHNODE_CHAP_AUTH_EN,
+	ISCSI_FLASHNODE_SNACK_REQ_EN,
+	ISCSI_FLASHNODE_DISCOVERY_LOGOUT_EN,
+	ISCSI_FLASHNODE_BIDI_CHAP_EN,
+	/* make authentication for discovery sessions optional */
+	ISCSI_FLASHNODE_DISCOVERY_AUTH_OPTIONAL,
+	ISCSI_FLASHNODE_ERL,
+	ISCSI_FLASHNODE_TCP_TIMESTAMP_STAT,
+	ISCSI_FLASHNODE_TCP_NAGLE_DISABLE,
+	ISCSI_FLASHNODE_TCP_WSF_DISABLE,
+	ISCSI_FLASHNODE_TCP_TIMER_SCALE,
+	ISCSI_FLASHNODE_TCP_TIMESTAMP_EN,
+	ISCSI_FLASHNODE_IP_FRAG_DISABLE,
+	ISCSI_FLASHNODE_MAX_RECV_DLENGTH,
+	ISCSI_FLASHNODE_MAX_XMIT_DLENGTH,
+	ISCSI_FLASHNODE_FIRST_BURST,
+	ISCSI_FLASHNODE_DEF_TIME2WAIT,
+	ISCSI_FLASHNODE_DEF_TIME2RETAIN,
+	ISCSI_FLASHNODE_MAX_R2T,
+	ISCSI_FLASHNODE_KEEPALIVE_TMO,
+	ISCSI_FLASHNODE_ISID,
+	ISCSI_FLASHNODE_TSID,
+	ISCSI_FLASHNODE_PORT,
+	ISCSI_FLASHNODE_MAX_BURST,
+	ISCSI_FLASHNODE_DEF_TASKMGMT_TMO,
+	ISCSI_FLASHNODE_IPADDR,
+	ISCSI_FLASHNODE_ALIAS,
+	ISCSI_FLASHNODE_REDIRECT_IPADDR,
+	ISCSI_FLASHNODE_MAX_SEGMENT_SIZE,
+	ISCSI_FLASHNODE_LOCAL_PORT,
+	ISCSI_FLASHNODE_IPV4_TOS,
+	ISCSI_FLASHNODE_IPV6_TC,
+	ISCSI_FLASHNODE_IPV6_FLOW_LABEL,
+	ISCSI_FLASHNODE_NAME,
+	ISCSI_FLASHNODE_TPGT,
+	ISCSI_FLASHNODE_LINK_LOCAL_IPV6,
+	ISCSI_FLASHNODE_DISCOVERY_PARENT_IDX,
+	ISCSI_FLASHNODE_DISCOVERY_PARENT_TYPE,
+	ISCSI_FLASHNODE_TCP_XMIT_WSF,
+	ISCSI_FLASHNODE_TCP_RECV_WSF,
+	ISCSI_FLASHNODE_CHAP_IN_IDX,
+	ISCSI_FLASHNODE_CHAP_OUT_IDX,
+	ISCSI_FLASHNODE_USERNAME,
+	ISCSI_FLASHNODE_USERNAME_IN,
+	ISCSI_FLASHNODE_PASSWORD,
+	ISCSI_FLASHNODE_PASSWORD_IN,
+	ISCSI_FLASHNODE_STATSN,
+	ISCSI_FLASHNODE_EXP_STATSN,
+	ISCSI_FLASHNODE_IS_BOOT_TGT,
+
+	ISCSI_FLASHNODE_MAX,
+};
+
+struct iscsi_flashnode_param_info {
+	uint32_t len;		/* Actual length of the param */
+	uint16_t param;		/* iscsi param value */
+	uint8_t value[0];	/* length sized value follows */
+} __packed;
+
+enum iscsi_discovery_parent_type {
+	ISCSI_DISC_PARENT_UNKNOWN	= 0x1,
+	ISCSI_DISC_PARENT_SENDTGT	= 0x2,
+	ISCSI_DISC_PARENT_ISNS		= 0x3,
+};
+
+/* iSCSI port Speed */
+enum iscsi_port_speed {
+	ISCSI_PORT_SPEED_UNKNOWN	= 0x1,
+	ISCSI_PORT_SPEED_10MBPS		= 0x2,
+	ISCSI_PORT_SPEED_100MBPS	= 0x4,
+	ISCSI_PORT_SPEED_1GBPS		= 0x8,
+	ISCSI_PORT_SPEED_10GBPS		= 0x10,
+	ISCSI_PORT_SPEED_25GBPS         = 0x20,
+	ISCSI_PORT_SPEED_40GBPS         = 0x40,
+};
+
+/* iSCSI port state */
+enum iscsi_port_state {
+	ISCSI_PORT_STATE_DOWN		= 0x1,
+	ISCSI_PORT_STATE_UP		= 0x2,
+};
+
+/* iSCSI PING status/error code */
+enum iscsi_ping_status_code {
+	ISCSI_PING_SUCCESS			= 0,
+	ISCSI_PING_FW_DISABLED			= 0x1,
+	ISCSI_PING_IPADDR_INVALID		= 0x2,
+	ISCSI_PING_LINKLOCAL_IPV6_ADDR_INVALID	= 0x3,
+	ISCSI_PING_TIMEOUT			= 0x4,
+	ISCSI_PING_INVALID_DEST_ADDR		= 0x5,
+	ISCSI_PING_OVERSIZE_PACKET		= 0x6,
+	ISCSI_PING_ICMP_ERROR			= 0x7,
+	ISCSI_PING_MAX_REQ_EXCEEDED		= 0x8,
+	ISCSI_PING_NO_ARP_RECEIVED		= 0x9,
+};
+
+#define iscsi_ptr(_handle) ((void*)(unsigned long)_handle)
+#define iscsi_handle(_ptr) ((uint64_t)(unsigned long)_ptr)
+
+/*
+ * These flags presents iSCSI Data-Path capabilities.
+ */
+#define CAP_RECOVERY_L0		0x1
+#define CAP_RECOVERY_L1		0x2
+#define CAP_RECOVERY_L2		0x4
+#define CAP_MULTI_R2T		0x8
+#define CAP_HDRDGST		0x10
+#define CAP_DATADGST		0x20
+#define CAP_MULTI_CONN		0x40
+#define CAP_TEXT_NEGO		0x80
+#define CAP_MARKERS		0x100
+#define CAP_FW_DB		0x200
+#define CAP_SENDTARGETS_OFFLOAD	0x400	/* offload discovery process */
+#define CAP_DATA_PATH_OFFLOAD	0x800	/* offload entire IO path */
+#define CAP_DIGEST_OFFLOAD	0x1000	/* offload hdr and data digests */
+#define CAP_PADDING_OFFLOAD	0x2000	/* offload padding insertion, removal,
+					 and verification */
+#define CAP_LOGIN_OFFLOAD	0x4000  /* offload session login */
+
+/*
+ * These flags describes reason of stop_conn() call
+ */
+#define STOP_CONN_TERM		0x1
+#define STOP_CONN_SUSPEND	0x2
+#define STOP_CONN_RECOVER	0x3
+
+#define ISCSI_STATS_CUSTOM_MAX		32
+#define ISCSI_STATS_CUSTOM_DESC_MAX	64
+struct iscsi_stats_custom {
+	char desc[ISCSI_STATS_CUSTOM_DESC_MAX];
+	uint64_t value;
+};
+
+/*
+ * struct iscsi_stats - iSCSI Statistics (iSCSI MIB)
+ *
+ * Note: this structure contains counters collected on per-connection basis.
+ */
+struct iscsi_stats {
+	/* octets */
+	uint64_t txdata_octets;
+	uint64_t rxdata_octets;
+
+	/* xmit pdus */
+	uint32_t noptx_pdus;
+	uint32_t scsicmd_pdus;
+	uint32_t tmfcmd_pdus;
+	uint32_t login_pdus;
+	uint32_t text_pdus;
+	uint32_t dataout_pdus;
+	uint32_t logout_pdus;
+	uint32_t snack_pdus;
+
+	/* recv pdus */
+	uint32_t noprx_pdus;
+	uint32_t scsirsp_pdus;
+	uint32_t tmfrsp_pdus;
+	uint32_t textrsp_pdus;
+	uint32_t datain_pdus;
+	uint32_t logoutrsp_pdus;
+	uint32_t r2t_pdus;
+	uint32_t async_pdus;
+	uint32_t rjt_pdus;
+
+	/* errors */
+	uint32_t digest_err;
+	uint32_t timeout_err;
+
+	/*
+	 * iSCSI Custom Statistics support, i.e. Transport could
+	 * extend existing MIB statistics with its own specific statistics
+	 * up to ISCSI_STATS_CUSTOM_MAX
+	 */
+	uint32_t custom_length;
+	struct iscsi_stats_custom custom[0]
+		__attribute__ ((aligned (sizeof(uint64_t))));
+};
+
+enum chap_type_e {
+	CHAP_TYPE_OUT,
+	CHAP_TYPE_IN,
+};
+
+enum iscsi_chap_param {
+	ISCSI_CHAP_PARAM_INDEX,
+	ISCSI_CHAP_PARAM_CHAP_TYPE,
+	ISCSI_CHAP_PARAM_USERNAME,
+	ISCSI_CHAP_PARAM_PASSWORD,
+	ISCSI_CHAP_PARAM_PASSWORD_LEN
+};
+
+#define ISCSI_CHAP_AUTH_NAME_MAX_LEN	256
+#define ISCSI_CHAP_AUTH_SECRET_MAX_LEN	256
+struct iscsi_chap_rec {
+	uint16_t chap_tbl_idx;
+	enum chap_type_e chap_type;
+	char username[ISCSI_CHAP_AUTH_NAME_MAX_LEN];
+	uint8_t password[ISCSI_CHAP_AUTH_SECRET_MAX_LEN];
+	uint8_t password_length;
+};
+
+#define ISCSI_HOST_STATS_CUSTOM_MAX             32
+#define ISCSI_HOST_STATS_CUSTOM_DESC_MAX        64
+struct iscsi_host_stats_custom {
+	char desc[ISCSI_HOST_STATS_CUSTOM_DESC_MAX];
+	uint64_t value;
+};
+
+/* struct iscsi_offload_host_stats: Host statistics,
+ * Include statistics for MAC, IP, TCP & iSCSI.
+ */
+struct iscsi_offload_host_stats {
+	/* MAC */
+	uint64_t mactx_frames;
+	uint64_t mactx_bytes;
+	uint64_t mactx_multicast_frames;
+	uint64_t mactx_broadcast_frames;
+	uint64_t mactx_pause_frames;
+	uint64_t mactx_control_frames;
+	uint64_t mactx_deferral;
+	uint64_t mactx_excess_deferral;
+	uint64_t mactx_late_collision;
+	uint64_t mactx_abort;
+	uint64_t mactx_single_collision;
+	uint64_t mactx_multiple_collision;
+	uint64_t mactx_collision;
+	uint64_t mactx_frames_dropped;
+	uint64_t mactx_jumbo_frames;
+	uint64_t macrx_frames;
+	uint64_t macrx_bytes;
+	uint64_t macrx_unknown_control_frames;
+	uint64_t macrx_pause_frames;
+	uint64_t macrx_control_frames;
+	uint64_t macrx_dribble;
+	uint64_t macrx_frame_length_error;
+	uint64_t macrx_jabber;
+	uint64_t macrx_carrier_sense_error;
+	uint64_t macrx_frame_discarded;
+	uint64_t macrx_frames_dropped;
+	uint64_t mac_crc_error;
+	uint64_t mac_encoding_error;
+	uint64_t macrx_length_error_large;
+	uint64_t macrx_length_error_small;
+	uint64_t macrx_multicast_frames;
+	uint64_t macrx_broadcast_frames;
+	/* IP */
+	uint64_t iptx_packets;
+	uint64_t iptx_bytes;
+	uint64_t iptx_fragments;
+	uint64_t iprx_packets;
+	uint64_t iprx_bytes;
+	uint64_t iprx_fragments;
+	uint64_t ip_datagram_reassembly;
+	uint64_t ip_invalid_address_error;
+	uint64_t ip_error_packets;
+	uint64_t ip_fragrx_overlap;
+	uint64_t ip_fragrx_outoforder;
+	uint64_t ip_datagram_reassembly_timeout;
+	uint64_t ipv6tx_packets;
+	uint64_t ipv6tx_bytes;
+	uint64_t ipv6tx_fragments;
+	uint64_t ipv6rx_packets;
+	uint64_t ipv6rx_bytes;
+	uint64_t ipv6rx_fragments;
+	uint64_t ipv6_datagram_reassembly;
+	uint64_t ipv6_invalid_address_error;
+	uint64_t ipv6_error_packets;
+	uint64_t ipv6_fragrx_overlap;
+	uint64_t ipv6_fragrx_outoforder;
+	uint64_t ipv6_datagram_reassembly_timeout;
+	/* TCP */
+	uint64_t tcptx_segments;
+	uint64_t tcptx_bytes;
+	uint64_t tcprx_segments;
+	uint64_t tcprx_byte;
+	uint64_t tcp_duplicate_ack_retx;
+	uint64_t tcp_retx_timer_expired;
+	uint64_t tcprx_duplicate_ack;
+	uint64_t tcprx_pure_ackr;
+	uint64_t tcptx_delayed_ack;
+	uint64_t tcptx_pure_ack;
+	uint64_t tcprx_segment_error;
+	uint64_t tcprx_segment_outoforder;
+	uint64_t tcprx_window_probe;
+	uint64_t tcprx_window_update;
+	uint64_t tcptx_window_probe_persist;
+	/* ECC */
+	uint64_t ecc_error_correction;
+	/* iSCSI */
+	uint64_t iscsi_pdu_tx;
+	uint64_t iscsi_data_bytes_tx;
+	uint64_t iscsi_pdu_rx;
+	uint64_t iscsi_data_bytes_rx;
+	uint64_t iscsi_io_completed;
+	uint64_t iscsi_unexpected_io_rx;
+	uint64_t iscsi_format_error;
+	uint64_t iscsi_hdr_digest_error;
+	uint64_t iscsi_data_digest_error;
+	uint64_t iscsi_sequence_error;
+	/*
+	 * iSCSI Custom Host Statistics support, i.e. Transport could
+	 * extend existing host statistics with its own specific statistics
+	 * up to ISCSI_HOST_STATS_CUSTOM_MAX
+	 */
+	uint32_t custom_length;
+	struct iscsi_host_stats_custom custom[0]
+		__aligned(sizeof(uint64_t));
+};
+
+#endif
diff --git a/include/scsi/iscsi_proto.h b/include/scsi/iscsi_proto.h
new file mode 100644
index 000000000..df156f1d5
--- /dev/null
+++ b/include/scsi/iscsi_proto.h
@@ -0,0 +1,668 @@
+/*
+ * RFC 3720 (iSCSI) protocol data types
+ *
+ * Copyright (C) 2005 Dmitry Yusupov
+ * Copyright (C) 2005 Alex Aizman
+ * maintained by open-iscsi@googlegroups.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * See the file COPYING included with this distribution for more details.
+ */
+
+#ifndef ISCSI_PROTO_H
+#define ISCSI_PROTO_H
+
+#include <linux/types.h>
+#include <scsi/scsi.h>
+
+#define ISCSI_DRAFT20_VERSION	0x00
+
+/* default iSCSI listen port for incoming connections */
+#define ISCSI_LISTEN_PORT	3260
+
+/* iSCSI header length */
+#define ISCSI_HDR_LEN		48
+
+/* iSCSI CRC32C length */
+#define ISCSI_CRC_LEN		4
+
+/* Padding word length */
+#define ISCSI_PAD_LEN		4
+
+/*
+ * Serial Number Arithmetic, 32 bits, RFC1982
+ */
+
+static inline int iscsi_sna_lt(u32 n1, u32 n2)
+{
+	return (s32)(n1 - n2) < 0;
+}
+
+static inline int iscsi_sna_lte(u32 n1, u32 n2)
+{
+	return (s32)(n1 - n2) <= 0;
+}
+
+static inline int iscsi_sna_gt(u32 n1, u32 n2)
+{
+	return (s32)(n1 - n2) > 0;
+}
+
+static inline int iscsi_sna_gte(u32 n1, u32 n2)
+{
+	return (s32)(n1 - n2) >= 0;
+}
+
+/*
+ * useful common(control and data pathes) macro
+ */
+#define ntoh24(p) (((p)[0] << 16) | ((p)[1] << 8) | ((p)[2]))
+#define hton24(p, v) { \
+        p[0] = (((v) >> 16) & 0xFF); \
+        p[1] = (((v) >> 8) & 0xFF); \
+        p[2] = ((v) & 0xFF); \
+}
+#define zero_data(p) {p[0]=0;p[1]=0;p[2]=0;}
+
+/* initiator tags; opaque for target */
+typedef uint32_t __bitwise itt_t;
+/* below makes sense only for initiator that created this tag */
+#define build_itt(itt, age) ((__force itt_t)\
+	((itt) | ((age) << ISCSI_AGE_SHIFT)))
+#define get_itt(itt) ((__force uint32_t)(itt_t)(itt) & ISCSI_ITT_MASK)
+#define RESERVED_ITT ((__force itt_t)0xffffffff)
+
+/*
+ * iSCSI Template Message Header
+ */
+struct iscsi_hdr {
+	uint8_t		opcode;
+	uint8_t		flags;		/* Final bit */
+	uint8_t		rsvd2[2];
+	uint8_t		hlength;	/* AHSs total length */
+	uint8_t		dlength[3];	/* Data length */
+	struct scsi_lun	lun;
+	itt_t		itt;		/* Initiator Task Tag, opaque for target */
+	__be32		ttt;		/* Target Task Tag */
+	__be32		statsn;
+	__be32		exp_statsn;
+	__be32		max_statsn;
+	uint8_t		other[12];
+};
+
+/************************* RFC 3720 Begin *****************************/
+
+#define ISCSI_RESERVED_TAG		0xffffffff
+
+/* Opcode encoding bits */
+#define ISCSI_OP_RETRY			0x80
+#define ISCSI_OP_IMMEDIATE		0x40
+#define ISCSI_OPCODE_MASK		0x3F
+
+/* Initiator Opcode values */
+#define ISCSI_OP_NOOP_OUT		0x00
+#define ISCSI_OP_SCSI_CMD		0x01
+#define ISCSI_OP_SCSI_TMFUNC		0x02
+#define ISCSI_OP_LOGIN			0x03
+#define ISCSI_OP_TEXT			0x04
+#define ISCSI_OP_SCSI_DATA_OUT		0x05
+#define ISCSI_OP_LOGOUT			0x06
+#define ISCSI_OP_SNACK			0x10
+
+#define ISCSI_OP_VENDOR1_CMD		0x1c
+#define ISCSI_OP_VENDOR2_CMD		0x1d
+#define ISCSI_OP_VENDOR3_CMD		0x1e
+#define ISCSI_OP_VENDOR4_CMD		0x1f
+
+/* Target Opcode values */
+#define ISCSI_OP_NOOP_IN		0x20
+#define ISCSI_OP_SCSI_CMD_RSP		0x21
+#define ISCSI_OP_SCSI_TMFUNC_RSP	0x22
+#define ISCSI_OP_LOGIN_RSP		0x23
+#define ISCSI_OP_TEXT_RSP		0x24
+#define ISCSI_OP_SCSI_DATA_IN		0x25
+#define ISCSI_OP_LOGOUT_RSP		0x26
+#define ISCSI_OP_R2T			0x31
+#define ISCSI_OP_ASYNC_EVENT		0x32
+#define ISCSI_OP_REJECT			0x3f
+
+struct iscsi_ahs_hdr {
+	__be16 ahslength;
+	uint8_t ahstype;
+	uint8_t ahspec[5];
+};
+
+#define ISCSI_AHSTYPE_CDB		1
+#define ISCSI_AHSTYPE_RLENGTH		2
+#define ISCSI_CDB_SIZE			16
+
+/* iSCSI PDU Header */
+struct iscsi_scsi_req {
+	uint8_t opcode;
+	uint8_t flags;
+	__be16 rsvd2;
+	uint8_t hlength;
+	uint8_t dlength[3];
+	struct scsi_lun lun;
+	itt_t	 itt;	/* Initiator Task Tag */
+	__be32 data_length;
+	__be32 cmdsn;
+	__be32 exp_statsn;
+	uint8_t cdb[ISCSI_CDB_SIZE];	/* SCSI Command Block */
+	/* Additional Data (Command Dependent) */
+};
+
+/* Command PDU flags */
+#define ISCSI_FLAG_CMD_FINAL		0x80
+#define ISCSI_FLAG_CMD_READ		0x40
+#define ISCSI_FLAG_CMD_WRITE		0x20
+#define ISCSI_FLAG_CMD_ATTR_MASK	0x07	/* 3 bits */
+
+/* SCSI Command Attribute values */
+#define ISCSI_ATTR_UNTAGGED		0
+#define ISCSI_ATTR_SIMPLE		1
+#define ISCSI_ATTR_ORDERED		2
+#define ISCSI_ATTR_HEAD_OF_QUEUE	3
+#define ISCSI_ATTR_ACA			4
+
+struct iscsi_rlength_ahdr {
+	__be16 ahslength;
+	uint8_t ahstype;
+	uint8_t reserved;
+	__be32 read_length;
+};
+
+/* Extended CDB AHS */
+struct iscsi_ecdb_ahdr {
+	__be16 ahslength;	/* CDB length - 15, including reserved byte */
+	uint8_t ahstype;
+	uint8_t reserved;
+	/* 4-byte aligned extended CDB spillover */
+	uint8_t ecdb[SCSI_MAX_VARLEN_CDB_SIZE - ISCSI_CDB_SIZE];
+};
+
+/* SCSI Response Header */
+struct iscsi_scsi_rsp {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t response;
+	uint8_t cmd_status;
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t rsvd[8];
+	itt_t	 itt;	/* Initiator Task Tag */
+	__be32	rsvd1;
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	__be32	exp_datasn;
+	__be32	bi_residual_count;
+	__be32	residual_count;
+	/* Response or Sense Data (optional) */
+};
+
+/* Command Response PDU flags */
+#define ISCSI_FLAG_CMD_BIDI_OVERFLOW	0x10
+#define ISCSI_FLAG_CMD_BIDI_UNDERFLOW	0x08
+#define ISCSI_FLAG_CMD_OVERFLOW		0x04
+#define ISCSI_FLAG_CMD_UNDERFLOW	0x02
+
+/* iSCSI Status values. Valid if Rsp Selector bit is not set */
+#define ISCSI_STATUS_CMD_COMPLETED	0
+#define ISCSI_STATUS_TARGET_FAILURE	1
+#define ISCSI_STATUS_SUBSYS_FAILURE	2
+
+/* Asynchronous Event Header */
+struct iscsi_async {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t rsvd2[2];
+	uint8_t rsvd3;
+	uint8_t dlength[3];
+	struct scsi_lun	lun;
+	uint8_t rsvd4[8];
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	uint8_t async_event;
+	uint8_t async_vcode;
+	__be16	param1;
+	__be16	param2;
+	__be16	param3;
+	uint8_t rsvd5[4];
+};
+
+/* iSCSI Event Codes */
+#define ISCSI_ASYNC_MSG_SCSI_EVENT			0
+#define ISCSI_ASYNC_MSG_REQUEST_LOGOUT			1
+#define ISCSI_ASYNC_MSG_DROPPING_CONNECTION		2
+#define ISCSI_ASYNC_MSG_DROPPING_ALL_CONNECTIONS	3
+#define ISCSI_ASYNC_MSG_PARAM_NEGOTIATION		4
+#define ISCSI_ASYNC_MSG_VENDOR_SPECIFIC			255
+
+/* NOP-Out Message */
+struct iscsi_nopout {
+	uint8_t opcode;
+	uint8_t flags;
+	__be16	rsvd2;
+	uint8_t rsvd3;
+	uint8_t dlength[3];
+	struct scsi_lun	lun;
+	itt_t	 itt;	/* Initiator Task Tag */
+	__be32	ttt;	/* Target Transfer Tag */
+	__be32	cmdsn;
+	__be32	exp_statsn;
+	uint8_t rsvd4[16];
+};
+
+/* NOP-In Message */
+struct iscsi_nopin {
+	uint8_t opcode;
+	uint8_t flags;
+	__be16	rsvd2;
+	uint8_t rsvd3;
+	uint8_t dlength[3];
+	struct scsi_lun	lun;
+	itt_t	 itt;	/* Initiator Task Tag */
+	__be32	ttt;	/* Target Transfer Tag */
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	uint8_t rsvd4[12];
+};
+
+/* SCSI Task Management Message Header */
+struct iscsi_tm {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t rsvd1[2];
+	uint8_t hlength;
+	uint8_t dlength[3];
+	struct scsi_lun lun;
+	itt_t	 itt;	/* Initiator Task Tag */
+	itt_t	 rtt;	/* Reference Task Tag */
+	__be32	cmdsn;
+	__be32	exp_statsn;
+	__be32	refcmdsn;
+	__be32	exp_datasn;
+	uint8_t rsvd2[8];
+};
+
+#define ISCSI_FLAG_TM_FUNC_MASK			0x7F
+
+/* Function values */
+#define ISCSI_TM_FUNC_ABORT_TASK		1
+#define ISCSI_TM_FUNC_ABORT_TASK_SET		2
+#define ISCSI_TM_FUNC_CLEAR_ACA			3
+#define ISCSI_TM_FUNC_CLEAR_TASK_SET		4
+#define ISCSI_TM_FUNC_LOGICAL_UNIT_RESET	5
+#define ISCSI_TM_FUNC_TARGET_WARM_RESET		6
+#define ISCSI_TM_FUNC_TARGET_COLD_RESET		7
+#define ISCSI_TM_FUNC_TASK_REASSIGN		8
+
+#define ISCSI_TM_FUNC_VALUE(hdr) ((hdr)->flags & ISCSI_FLAG_TM_FUNC_MASK)
+
+/* SCSI Task Management Response Header */
+struct iscsi_tm_rsp {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t response;	/* see Response values below */
+	uint8_t qualifier;
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t rsvd2[8];
+	itt_t	 itt;	/* Initiator Task Tag */
+	itt_t	 rtt;	/* Reference Task Tag */
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	uint8_t rsvd3[12];
+};
+
+/* Response values */
+#define ISCSI_TMF_RSP_COMPLETE		0x00
+#define ISCSI_TMF_RSP_NO_TASK		0x01
+#define ISCSI_TMF_RSP_NO_LUN		0x02
+#define ISCSI_TMF_RSP_TASK_ALLEGIANT	0x03
+#define ISCSI_TMF_RSP_NO_FAILOVER	0x04
+#define ISCSI_TMF_RSP_NOT_SUPPORTED	0x05
+#define ISCSI_TMF_RSP_AUTH_FAILED	0x06
+#define ISCSI_TMF_RSP_REJECTED		0xff
+
+/* Ready To Transfer Header */
+struct iscsi_r2t_rsp {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t rsvd2[2];
+	uint8_t	hlength;
+	uint8_t	dlength[3];
+	struct scsi_lun	lun;
+	itt_t	 itt;	/* Initiator Task Tag */
+	__be32	ttt;	/* Target Transfer Tag */
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	__be32	r2tsn;
+	__be32	data_offset;
+	__be32	data_length;
+};
+
+/* SCSI Data Hdr */
+struct iscsi_data {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t rsvd2[2];
+	uint8_t rsvd3;
+	uint8_t dlength[3];
+	struct scsi_lun lun;
+	itt_t	 itt;
+	__be32	ttt;
+	__be32	rsvd4;
+	__be32	exp_statsn;
+	__be32	rsvd5;
+	__be32	datasn;
+	__be32	offset;
+	__be32	rsvd6;
+	/* Payload */
+};
+
+/* SCSI Data Response Hdr */
+struct iscsi_data_rsp {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t rsvd2;
+	uint8_t cmd_status;
+	uint8_t hlength;
+	uint8_t dlength[3];
+	struct scsi_lun	lun;
+	itt_t	 itt;
+	__be32	ttt;
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	__be32	datasn;
+	__be32	offset;
+	__be32	residual_count;
+};
+
+/* Data Response PDU flags */
+#define ISCSI_FLAG_DATA_ACK		0x40
+#define ISCSI_FLAG_DATA_OVERFLOW	0x04
+#define ISCSI_FLAG_DATA_UNDERFLOW	0x02
+#define ISCSI_FLAG_DATA_STATUS		0x01
+
+/* Text Header */
+struct iscsi_text {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t rsvd2[2];
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t rsvd4[8];
+	itt_t	 itt;
+	__be32	ttt;
+	__be32	cmdsn;
+	__be32	exp_statsn;
+	uint8_t rsvd5[16];
+	/* Text - key=value pairs */
+};
+
+#define ISCSI_FLAG_TEXT_CONTINUE	0x40
+
+/* Text Response Header */
+struct iscsi_text_rsp {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t rsvd2[2];
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t rsvd4[8];
+	itt_t	 itt;
+	__be32	ttt;
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	uint8_t rsvd5[12];
+	/* Text Response - key:value pairs */
+};
+
+/* Login Header */
+struct iscsi_login_req {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t max_version;	/* Max. version supported */
+	uint8_t min_version;	/* Min. version supported */
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t isid[6];	/* Initiator Session ID */
+	__be16	tsih;	/* Target Session Handle */
+	itt_t	 itt;	/* Initiator Task Tag */
+	__be16	cid;
+	__be16	rsvd3;
+	__be32	cmdsn;
+	__be32	exp_statsn;
+	uint8_t rsvd5[16];
+};
+
+/* Login PDU flags */
+#define ISCSI_FLAG_LOGIN_TRANSIT		0x80
+#define ISCSI_FLAG_LOGIN_CONTINUE		0x40
+#define ISCSI_FLAG_LOGIN_CURRENT_STAGE_MASK	0x0C	/* 2 bits */
+#define ISCSI_FLAG_LOGIN_CURRENT_STAGE1		0x04
+#define ISCSI_FLAG_LOGIN_CURRENT_STAGE2		0x08
+#define ISCSI_FLAG_LOGIN_CURRENT_STAGE3		0x0C
+#define ISCSI_FLAG_LOGIN_NEXT_STAGE_MASK	0x03	/* 2 bits */
+#define ISCSI_FLAG_LOGIN_NEXT_STAGE1		0x01
+#define ISCSI_FLAG_LOGIN_NEXT_STAGE2		0x02
+#define ISCSI_FLAG_LOGIN_NEXT_STAGE3		0x03
+
+#define ISCSI_LOGIN_CURRENT_STAGE(flags) \
+	((flags & ISCSI_FLAG_LOGIN_CURRENT_STAGE_MASK) >> 2)
+#define ISCSI_LOGIN_NEXT_STAGE(flags) \
+	(flags & ISCSI_FLAG_LOGIN_NEXT_STAGE_MASK)
+
+/* Login Response Header */
+struct iscsi_login_rsp {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t max_version;	/* Max. version supported */
+	uint8_t active_version;	/* Active version */
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t isid[6];	/* Initiator Session ID */
+	__be16	tsih;	/* Target Session Handle */
+	itt_t	 itt;	/* Initiator Task Tag */
+	__be32	rsvd3;
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	uint8_t status_class;	/* see Login RSP ststus classes below */
+	uint8_t status_detail;	/* see Login RSP Status details below */
+	uint8_t rsvd4[10];
+};
+
+/* Login stage (phase) codes for CSG, NSG */
+#define ISCSI_INITIAL_LOGIN_STAGE		-1
+#define ISCSI_SECURITY_NEGOTIATION_STAGE	0
+#define ISCSI_OP_PARMS_NEGOTIATION_STAGE	1
+#define ISCSI_FULL_FEATURE_PHASE		3
+
+/* Login Status response classes */
+#define ISCSI_STATUS_CLS_SUCCESS		0x00
+#define ISCSI_STATUS_CLS_REDIRECT		0x01
+#define ISCSI_STATUS_CLS_INITIATOR_ERR		0x02
+#define ISCSI_STATUS_CLS_TARGET_ERR		0x03
+
+/* Login Status response detail codes */
+/* Class-0 (Success) */
+#define ISCSI_LOGIN_STATUS_ACCEPT		0x00
+
+/* Class-1 (Redirection) */
+#define ISCSI_LOGIN_STATUS_TGT_MOVED_TEMP	0x01
+#define ISCSI_LOGIN_STATUS_TGT_MOVED_PERM	0x02
+
+/* Class-2 (Initiator Error) */
+#define ISCSI_LOGIN_STATUS_INIT_ERR		0x00
+#define ISCSI_LOGIN_STATUS_AUTH_FAILED		0x01
+#define ISCSI_LOGIN_STATUS_TGT_FORBIDDEN	0x02
+#define ISCSI_LOGIN_STATUS_TGT_NOT_FOUND	0x03
+#define ISCSI_LOGIN_STATUS_TGT_REMOVED		0x04
+#define ISCSI_LOGIN_STATUS_NO_VERSION		0x05
+#define ISCSI_LOGIN_STATUS_ISID_ERROR		0x06
+#define ISCSI_LOGIN_STATUS_MISSING_FIELDS	0x07
+#define ISCSI_LOGIN_STATUS_CONN_ADD_FAILED	0x08
+#define ISCSI_LOGIN_STATUS_NO_SESSION_TYPE	0x09
+#define ISCSI_LOGIN_STATUS_NO_SESSION		0x0a
+#define ISCSI_LOGIN_STATUS_INVALID_REQUEST	0x0b
+
+/* Class-3 (Target Error) */
+#define ISCSI_LOGIN_STATUS_TARGET_ERROR		0x00
+#define ISCSI_LOGIN_STATUS_SVC_UNAVAILABLE	0x01
+#define ISCSI_LOGIN_STATUS_NO_RESOURCES		0x02
+
+/* Logout Header */
+struct iscsi_logout {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t rsvd1[2];
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t rsvd2[8];
+	itt_t	 itt;	/* Initiator Task Tag */
+	__be16	cid;
+	uint8_t rsvd3[2];
+	__be32	cmdsn;
+	__be32	exp_statsn;
+	uint8_t rsvd4[16];
+};
+
+/* Logout PDU flags */
+#define ISCSI_FLAG_LOGOUT_REASON_MASK	0x7F
+
+/* logout reason_code values */
+
+#define ISCSI_LOGOUT_REASON_CLOSE_SESSION	0
+#define ISCSI_LOGOUT_REASON_CLOSE_CONNECTION	1
+#define ISCSI_LOGOUT_REASON_RECOVERY		2
+#define ISCSI_LOGOUT_REASON_AEN_REQUEST		3
+
+/* Logout Response Header */
+struct iscsi_logout_rsp {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t response;	/* see Logout response values below */
+	uint8_t rsvd2;
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t rsvd3[8];
+	itt_t	 itt;	/* Initiator Task Tag */
+	__be32	rsvd4;
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	__be32	rsvd5;
+	__be16	t2wait;
+	__be16	t2retain;
+	__be32	rsvd6;
+};
+
+/* logout response status values */
+
+#define ISCSI_LOGOUT_SUCCESS			0
+#define ISCSI_LOGOUT_CID_NOT_FOUND		1
+#define ISCSI_LOGOUT_RECOVERY_UNSUPPORTED	2
+#define ISCSI_LOGOUT_CLEANUP_FAILED		3
+
+/* SNACK Header */
+struct iscsi_snack {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t rsvd2[2];
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t lun[8];
+	itt_t	 itt;
+	__be32  ttt;
+	uint8_t rsvd3[4];
+	__be32  exp_statsn;
+	uint8_t rsvd4[8];
+	__be32	begrun;
+	__be32	runlength;
+};
+
+/* SNACK PDU flags */
+#define ISCSI_FLAG_SNACK_TYPE_DATA		0
+#define ISCSI_FLAG_SNACK_TYPE_R2T		0
+#define ISCSI_FLAG_SNACK_TYPE_STATUS		1
+#define ISCSI_FLAG_SNACK_TYPE_DATA_ACK		2
+#define ISCSI_FLAG_SNACK_TYPE_RDATA		3
+#define ISCSI_FLAG_SNACK_TYPE_MASK	0x0F	/* 4 bits */
+
+/* Reject Message Header */
+struct iscsi_reject {
+	uint8_t opcode;
+	uint8_t flags;
+	uint8_t reason;
+	uint8_t rsvd2;
+	uint8_t hlength;
+	uint8_t dlength[3];
+	uint8_t rsvd3[8];
+	__be32  ffffffff;
+	uint8_t rsvd4[4];
+	__be32	statsn;
+	__be32	exp_cmdsn;
+	__be32	max_cmdsn;
+	__be32	datasn;
+	uint8_t rsvd5[8];
+	/* Text - Rejected hdr */
+};
+
+/* Reason for Reject */
+#define ISCSI_REASON_CMD_BEFORE_LOGIN	1
+#define ISCSI_REASON_DATA_DIGEST_ERROR	2
+#define ISCSI_REASON_DATA_SNACK_REJECT	3
+#define ISCSI_REASON_PROTOCOL_ERROR	4
+#define ISCSI_REASON_CMD_NOT_SUPPORTED	5
+#define ISCSI_REASON_IMM_CMD_REJECT		6
+#define ISCSI_REASON_TASK_IN_PROGRESS	7
+#define ISCSI_REASON_INVALID_SNACK		8
+#define ISCSI_REASON_BOOKMARK_INVALID	9
+#define ISCSI_REASON_BOOKMARK_NO_RESOURCES	10
+#define ISCSI_REASON_NEGOTIATION_RESET	11
+
+/* Max. number of Key=Value pairs in a text message */
+#define MAX_KEY_VALUE_PAIRS	8192
+
+/* maximum length for text keys/values */
+#define KEY_MAXLEN		64
+#define VALUE_MAXLEN		255
+#define TARGET_NAME_MAXLEN	VALUE_MAXLEN
+
+#define ISCSI_DEF_MAX_RECV_SEG_LEN		8192
+#define ISCSI_MIN_MAX_RECV_SEG_LEN		512
+#define ISCSI_MAX_MAX_RECV_SEG_LEN		16777215
+
+#define ISCSI_DEF_FIRST_BURST_LEN		65536
+#define ISCSI_MIN_FIRST_BURST_LEN		512
+#define ISCSI_MAX_FIRST_BURST_LEN		16777215
+
+#define ISCSI_DEF_MAX_BURST_LEN			262144
+#define ISCSI_MIN_MAX_BURST_LEN			512
+#define ISCSI_MAX_MAX_BURST_LEN			16777215
+
+#define ISCSI_DEF_TIME2WAIT			2
+
+#define ISCSI_NAME_LEN				224
+
+/************************* RFC 3720 End *****************************/
+
+#endif /* ISCSI_PROTO_H */
diff --git a/include/scsi/iser.h b/include/scsi/iser.h
new file mode 100644
index 000000000..2e678fa74
--- /dev/null
+++ b/include/scsi/iser.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *	- Redistributions of source code must retain the above
+ *	  copyright notice, this list of conditions and the following
+ *	  disclaimer.
+ *
+ *	- Redistributions in binary form must reproduce the above
+ *	  copyright notice, this list of conditions and the following
+ *	  disclaimer in the documentation and/or other materials
+ *	  provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef ISCSI_ISER_H
+#define ISCSI_ISER_H
+
+#define ISER_ZBVA_NOT_SUP		0x80
+#define ISER_SEND_W_INV_NOT_SUP		0x40
+#define ISERT_ZBVA_NOT_USED		0x80
+#define ISERT_SEND_W_INV_NOT_USED	0x40
+
+#define ISCSI_CTRL	0x10
+#define ISER_HELLO	0x20
+#define ISER_HELLORPLY	0x30
+
+#define ISER_VER	0x10
+#define ISER_WSV	0x08
+#define ISER_RSV	0x04
+
+/**
+ * struct iser_cm_hdr - iSER CM header (from iSER Annex A12)
+ *
+ * @flags:        flags support (zbva, send_w_inv)
+ * @rsvd:         reserved
+ */
+struct iser_cm_hdr {
+	u8      flags;
+	u8      rsvd[3];
+} __packed;
+
+/**
+ * struct iser_ctrl - iSER header of iSCSI control PDU
+ *
+ * @flags:        opcode and read/write valid bits
+ * @rsvd:         reserved
+ * @write_stag:   write rkey
+ * @write_va:     write virtual address
+ * @reaf_stag:    read rkey
+ * @read_va:      read virtual address
+ */
+struct iser_ctrl {
+	u8      flags;
+	u8      rsvd[3];
+	__be32  write_stag;
+	__be64  write_va;
+	__be32  read_stag;
+	__be64  read_va;
+} __packed;
+
+#endif /* ISCSI_ISER_H */
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
new file mode 100644
index 000000000..2109844be
--- /dev/null
+++ b/include/scsi/libfc.h
@@ -0,0 +1,1021 @@
+/*
+ * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _LIBFC_H_
+#define _LIBFC_H_
+
+#include <linux/timer.h>
+#include <linux/if.h>
+#include <linux/percpu.h>
+#include <linux/refcount.h>
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_fc.h>
+#include <scsi/scsi_bsg_fc.h>
+
+#include <scsi/fc/fc_fcp.h>
+#include <scsi/fc/fc_ns.h>
+#include <scsi/fc/fc_ms.h>
+#include <scsi/fc/fc_els.h>
+#include <scsi/fc/fc_gs.h>
+
+#include <scsi/fc_frame.h>
+
+#define	FC_FC4_PROV_SIZE	(FC_TYPE_FCP + 1)	/* size of tables */
+
+/*
+ * libfc error codes
+ */
+#define	FC_NO_ERR	0	/* no error */
+#define	FC_EX_TIMEOUT	1	/* Exchange timeout */
+#define	FC_EX_CLOSED	2	/* Exchange closed */
+#define FC_EX_ALLOC_ERR	3	/* Exchange allocation failed */
+#define FC_EX_XMIT_ERR	4	/* Exchange transmit failed */
+#define FC_EX_ELS_RJT	5	/* ELS rejected */
+#define FC_EX_INV_LOGIN	6	/* Login not completed */
+#define FC_EX_SEQ_ERR	6	/* Exchange sequence error */
+
+/**
+ * enum fc_lport_state - Local port states
+ * @LPORT_ST_DISABLED: Disabled
+ * @LPORT_ST_FLOGI:    Fabric login (FLOGI) sent
+ * @LPORT_ST_DNS:      Waiting for name server remote port to become ready
+ * @LPORT_ST_RPN_ID:   Register port name by ID (RPN_ID) sent
+ * @LPORT_ST_RFT_ID:   Register Fibre Channel types by ID (RFT_ID) sent
+ * @LPORT_ST_RFF_ID:   Register FC-4 Features by ID (RFF_ID) sent
+ * @LPORT_ST_FDMI:     Waiting for mgmt server rport to become ready
+ * @LPORT_ST_RHBA:
+ * @LPORT_ST_SCR:      State Change Register (SCR) sent
+ * @LPORT_ST_READY:    Ready for use
+ * @LPORT_ST_LOGO:     Local port logout (LOGO) sent
+ * @LPORT_ST_RESET:    Local port reset
+ */
+enum fc_lport_state {
+	LPORT_ST_DISABLED = 0,
+	LPORT_ST_FLOGI,
+	LPORT_ST_DNS,
+	LPORT_ST_RNN_ID,
+	LPORT_ST_RSNN_NN,
+	LPORT_ST_RSPN_ID,
+	LPORT_ST_RFT_ID,
+	LPORT_ST_RFF_ID,
+	LPORT_ST_FDMI,
+	LPORT_ST_RHBA,
+	LPORT_ST_RPA,
+	LPORT_ST_DHBA,
+	LPORT_ST_DPRT,
+	LPORT_ST_SCR,
+	LPORT_ST_READY,
+	LPORT_ST_LOGO,
+	LPORT_ST_RESET
+};
+
+enum fc_disc_event {
+	DISC_EV_NONE = 0,
+	DISC_EV_SUCCESS,
+	DISC_EV_FAILED
+};
+
+/**
+ * enum fc_rport_state - Remote port states
+ * @RPORT_ST_INIT:    Initialized
+ * @RPORT_ST_FLOGI:   Waiting for FLOGI completion for point-to-multipoint
+ * @RPORT_ST_PLOGI_WAIT:   Waiting for peer to login for point-to-multipoint
+ * @RPORT_ST_PLOGI:   Waiting for PLOGI completion
+ * @RPORT_ST_PRLI:    Waiting for PRLI completion
+ * @RPORT_ST_RTV:     Waiting for RTV completion
+ * @RPORT_ST_READY:   Ready for use
+ * @RPORT_ST_ADISC:   Discover Address sent
+ * @RPORT_ST_DELETE:  Remote port being deleted
+*/
+enum fc_rport_state {
+	RPORT_ST_INIT,
+	RPORT_ST_FLOGI,
+	RPORT_ST_PLOGI_WAIT,
+	RPORT_ST_PLOGI,
+	RPORT_ST_PRLI,
+	RPORT_ST_RTV,
+	RPORT_ST_READY,
+	RPORT_ST_ADISC,
+	RPORT_ST_DELETE,
+};
+
+/**
+ * struct fc_disc_port - temporary discovery port to hold rport identifiers
+ * @lp:         Fibre Channel host port instance
+ * @peers:      Node for list management during discovery and RSCN processing
+ * @rport_work: Work struct for starting the rport state machine
+ * @port_id:    Port ID of the discovered port
+ */
+struct fc_disc_port {
+	struct fc_lport    *lp;
+	struct list_head   peers;
+	struct work_struct rport_work;
+	u32                port_id;
+};
+
+/**
+ * enum fc_rport_event - Remote port events
+ * @RPORT_EV_NONE:   No event
+ * @RPORT_EV_READY:  Remote port is ready for use
+ * @RPORT_EV_FAILED: State machine failed, remote port is not ready
+ * @RPORT_EV_STOP:   Remote port has been stopped
+ * @RPORT_EV_LOGO:   Remote port logout (LOGO) sent
+ */
+enum fc_rport_event {
+	RPORT_EV_NONE = 0,
+	RPORT_EV_READY,
+	RPORT_EV_FAILED,
+	RPORT_EV_STOP,
+	RPORT_EV_LOGO
+};
+
+struct fc_rport_priv;
+
+/**
+ * struct fc_rport_operations - Operations for a remote port
+ * @event_callback: Function to be called for remote port events
+ */
+struct fc_rport_operations {
+	void (*event_callback)(struct fc_lport *, struct fc_rport_priv *,
+			       enum fc_rport_event);
+};
+
+/**
+ * struct fc_rport_libfc_priv - libfc internal information about a remote port
+ * @local_port: The associated local port
+ * @rp_state:   Indicates READY for I/O or DELETE when blocked
+ * @flags:      REC and RETRY supported flags
+ * @e_d_tov:    Error detect timeout value (in msec)
+ * @r_a_tov:    Resource allocation timeout value (in msec)
+ */
+struct fc_rport_libfc_priv {
+	struct fc_lport		   *local_port;
+	enum fc_rport_state        rp_state;
+	u16			   flags;
+	#define FC_RP_FLAGS_REC_SUPPORTED	(1 << 0)
+	#define FC_RP_FLAGS_RETRY		(1 << 1)
+	#define FC_RP_STARTED			(1 << 2)
+	#define FC_RP_FLAGS_CONF_REQ		(1 << 3)
+	unsigned int	           e_d_tov;
+	unsigned int	           r_a_tov;
+};
+
+/**
+ * struct fc_rport_priv - libfc remote port and discovery info
+ * @local_port:     The associated local port
+ * @rport:          The FC transport remote port
+ * @kref:           Reference counter
+ * @rp_state:       Enumeration that tracks progress of PLOGI, PRLI,
+ *                  and RTV exchanges
+ * @ids:            The remote port identifiers and roles
+ * @flags:          STARTED, REC and RETRY_SUPPORTED flags
+ * @max_seq:        Maximum number of concurrent sequences
+ * @disc_id:        The discovery identifier
+ * @maxframe_size:  The maximum frame size
+ * @retries:        The retry count for the current state
+ * @major_retries:  The retry count for the entire PLOGI/PRLI state machine
+ * @e_d_tov:        Error detect timeout value (in msec)
+ * @r_a_tov:        Resource allocation timeout value (in msec)
+ * @rp_mutex:       The mutex that protects the remote port
+ * @retry_work:     Handle for retries
+ * @event_callback: Callback when READY, FAILED or LOGO states complete
+ * @prli_count:     Count of open PRLI sessions in providers
+ * @rcu:	    Structure used for freeing in an RCU-safe manner
+ */
+struct fc_rport_priv {
+	struct fc_lport		    *local_port;
+	struct fc_rport		    *rport;
+	struct kref		    kref;
+	enum fc_rport_state         rp_state;
+	struct fc_rport_identifiers ids;
+	u16			    flags;
+	u16		            max_seq;
+	u16			    disc_id;
+	u16			    maxframe_size;
+	unsigned int	            retries;
+	unsigned int	            major_retries;
+	unsigned int	            e_d_tov;
+	unsigned int	            r_a_tov;
+	struct mutex                rp_mutex;
+	struct delayed_work	    retry_work;
+	enum fc_rport_event         event;
+	struct fc_rport_operations  *ops;
+	struct list_head            peers;
+	struct work_struct          event_work;
+	u32			    supported_classes;
+	u16                         prli_count;
+	struct rcu_head		    rcu;
+	u16			    sp_features;
+	u8			    spp_type;
+	void			    (*lld_event_callback)(struct fc_lport *,
+						      struct fc_rport_priv *,
+						      enum fc_rport_event);
+};
+
+/**
+ * struct fc_stats - fc stats structure
+ * @SecondsSinceLastReset: Seconds since the last reset
+ * @TxFrames:              Number of transmitted frames
+ * @TxWords:               Number of transmitted words
+ * @RxFrames:              Number of received frames
+ * @RxWords:               Number of received words
+ * @ErrorFrames:           Number of received error frames
+ * @DumpedFrames:          Number of dumped frames
+ * @FcpPktAllocFails:      Number of fcp packet allocation failures
+ * @FcpPktAborts:          Number of fcp packet aborts
+ * @FcpFrameAllocFails:    Number of fcp frame allocation failures
+ * @LinkFailureCount:      Number of link failures
+ * @LossOfSignalCount:     Number for signal losses
+ * @InvalidTxWordCount:    Number of invalid transmitted words
+ * @InvalidCRCCount:       Number of invalid CRCs
+ * @InputRequests:         Number of input requests
+ * @OutputRequests:        Number of output requests
+ * @ControlRequests:       Number of control requests
+ * @InputBytes:            Number of received bytes
+ * @OutputBytes:           Number of transmitted bytes
+ * @VLinkFailureCount:     Number of virtual link failures
+ * @MissDiscAdvCount:      Number of missing FIP discovery advertisement
+ */
+struct fc_stats {
+	u64		SecondsSinceLastReset;
+	u64		TxFrames;
+	u64		TxWords;
+	u64		RxFrames;
+	u64		RxWords;
+	u64		ErrorFrames;
+	u64		DumpedFrames;
+	u64		FcpPktAllocFails;
+	u64		FcpPktAborts;
+	u64		FcpFrameAllocFails;
+	u64		LinkFailureCount;
+	u64		LossOfSignalCount;
+	u64		InvalidTxWordCount;
+	u64		InvalidCRCCount;
+	u64		InputRequests;
+	u64		OutputRequests;
+	u64		ControlRequests;
+	u64		InputBytes;
+	u64		OutputBytes;
+	u64		VLinkFailureCount;
+	u64		MissDiscAdvCount;
+};
+
+/**
+ * struct fc_seq_els_data - ELS data used for passing ELS specific responses
+ * @reason: The reason for rejection
+ * @explan: The explanation of the rejection
+ *
+ * Mainly used by the exchange manager layer.
+ */
+struct fc_seq_els_data {
+	enum fc_els_rjt_reason reason;
+	enum fc_els_rjt_explan explan;
+};
+
+/**
+ * struct fc_fcp_pkt - FCP request structure (one for each scsi_cmnd request)
+ * @lp:              The associated local port
+ * @state:           The state of the I/O
+ * @ref_cnt:         Reference count
+ * @scsi_pkt_lock:   Lock to protect the SCSI packet (must be taken before the
+ *                   host_lock if both are to be held at the same time)
+ * @cmd:             The SCSI command (set and clear with the host_lock held)
+ * @list:            Tracks queued commands (accessed with the host_lock held)
+ * @timer:           The command timer
+ * @tm_done:         Completion indicator
+ * @wait_for_comp:   Indicator to wait for completion of the I/O (in jiffies)
+ * @data_len:        The length of the data
+ * @cdb_cmd:         The CDB command
+ * @xfer_len:        The transfer length
+ * @xfer_ddp:        Indicates if this transfer used DDP (XID of the exchange
+ *                   will be set here if DDP was setup)
+ * @xfer_contig_end: The offset into the buffer if the buffer is contiguous
+ *                   (Tx and Rx)
+ * @max_payload:     The maximum payload size (in bytes)
+ * @io_status:       SCSI result (upper 24 bits)
+ * @cdb_status:      CDB status
+ * @status_code:     FCP I/O status
+ * @scsi_comp_flags: Completion flags (bit 3 Underrun bit 2: overrun)
+ * @req_flags:       Request flags (bit 0: read bit:1 write)
+ * @scsi_resid:      SCSI residule length
+ * @rport:           The remote port that the SCSI command is targeted at
+ * @seq_ptr:         The sequence that will carry the SCSI command
+ * @recov_retry:     Number of recovery retries
+ * @recov_seq:       The sequence for REC or SRR
+ */
+struct fc_fcp_pkt {
+	spinlock_t	  scsi_pkt_lock;
+	refcount_t	  ref_cnt;
+
+	/* SCSI command and data transfer information */
+	u32		  data_len;
+
+	/* SCSI I/O related information */
+	struct scsi_cmnd  *cmd;
+	struct list_head  list;
+
+	/* Housekeeping information */
+	struct fc_lport   *lp;
+	u8		  state;
+
+	/* SCSI/FCP return status */
+	u8		  cdb_status;
+	u8		  status_code;
+	u8		  scsi_comp_flags;
+	u32		  io_status;
+	u32		  req_flags;
+	u32		  scsi_resid;
+
+	/* Transport related veriables */
+	size_t		  xfer_len;
+	struct fcp_cmnd   cdb_cmd;
+	u32		  xfer_contig_end;
+	u16		  max_payload;
+	u16		  xfer_ddp;
+
+	/* Associated structures */
+	struct fc_rport	  *rport;
+	struct fc_seq	  *seq_ptr;
+
+	/* Timeout/error related information */
+	struct timer_list timer;
+	int		  wait_for_comp;
+	int		  timer_delay;
+	u32		  recov_retry;
+	struct fc_seq	  *recov_seq;
+	struct completion tm_done;
+} ____cacheline_aligned_in_smp;
+
+/*
+ * Structure and function definitions for managing Fibre Channel Exchanges
+ * and Sequences
+ *
+ * fc_exch holds state for one exchange and links to its active sequence.
+ *
+ * fc_seq holds the state for an individual sequence.
+ */
+
+struct fc_exch_mgr;
+struct fc_exch_mgr_anchor;
+extern u16 fc_cpu_mask;	/* cpu mask for possible cpus */
+
+/**
+ * struct fc_seq - FC sequence
+ * @id:       The sequence ID
+ * @ssb_stat: Status flags for the sequence status block (SSB)
+ * @cnt:      Number of frames sent so far
+ * @rec_data: FC-4 value for REC
+ */
+struct fc_seq {
+	u8  id;
+	u16 ssb_stat;
+	u16 cnt;
+	u32 rec_data;
+};
+
+#define FC_EX_DONE		(1 << 0) /* ep is completed */
+#define FC_EX_RST_CLEANUP	(1 << 1) /* reset is forcing completion */
+#define FC_EX_QUARANTINE	(1 << 2) /* exch is quarantined */
+
+/**
+ * struct fc_exch - Fibre Channel Exchange
+ * @em:           Exchange manager
+ * @pool:         Exchange pool
+ * @state:        The exchange's state
+ * @xid:          The exchange ID
+ * @ex_list:      Handle used by the EM to track free exchanges
+ * @ex_lock:      Lock that protects the exchange
+ * @ex_refcnt:    Reference count
+ * @timeout_work: Handle for timeout handler
+ * @lp:           The local port that this exchange is on
+ * @oxid:         Originator's exchange ID
+ * @rxid:         Responder's exchange ID
+ * @oid:          Originator's FCID
+ * @sid:          Source FCID
+ * @did:          Destination FCID
+ * @esb_stat:     ESB exchange status
+ * @r_a_tov:      Resouce allocation time out value (in msecs)
+ * @seq_id:       The next sequence ID to use
+ * @encaps:       encapsulation information for lower-level driver
+ * @f_ctl:        F_CTL flags for the sequence
+ * @fh_type:      The frame type
+ * @class:        The class of service
+ * @seq:          The sequence in use on this exchange
+ * @resp_active:  Number of tasks that are concurrently executing @resp().
+ * @resp_task:    If @resp_active > 0, either the task executing @resp(), the
+ *                task that has been interrupted to execute the soft-IRQ
+ *                executing @resp() or NULL if more than one task is executing
+ *                @resp concurrently.
+ * @resp_wq:      Waitqueue for the tasks waiting on @resp_active.
+ * @resp:         Callback for responses on this exchange
+ * @destructor:   Called when destroying the exchange
+ * @arg:          Passed as a void pointer to the resp() callback
+ *
+ * Locking notes: The ex_lock protects following items:
+ *	state, esb_stat, f_ctl, seq.ssb_stat
+ *	seq_id
+ *	sequence allocation
+ */
+struct fc_exch {
+	spinlock_t	    ex_lock;
+	atomic_t	    ex_refcnt;
+	enum fc_class	    class;
+	struct fc_exch_mgr  *em;
+	struct fc_exch_pool *pool;
+	struct list_head    ex_list;
+	struct fc_lport	    *lp;
+	u32		    esb_stat;
+	u8		    state;
+	u8		    fh_type;
+	u8		    seq_id;
+	u8		    encaps;
+	u16		    xid;
+	u16		    oxid;
+	u16		    rxid;
+	u32		    oid;
+	u32		    sid;
+	u32		    did;
+	u32		    r_a_tov;
+	u32		    f_ctl;
+	struct fc_seq       seq;
+	int		    resp_active;
+	struct task_struct  *resp_task;
+	wait_queue_head_t   resp_wq;
+	void		    (*resp)(struct fc_seq *, struct fc_frame *, void *);
+	void		    *arg;
+	void		    (*destructor)(struct fc_seq *, void *);
+	struct delayed_work timeout_work;
+} ____cacheline_aligned_in_smp;
+#define	fc_seq_exch(sp) container_of(sp, struct fc_exch, seq)
+
+
+struct libfc_function_template {
+	/*
+	 * Interface to send a FC frame
+	 *
+	 * STATUS: REQUIRED
+	 */
+	int (*frame_send)(struct fc_lport *, struct fc_frame *);
+
+	/*
+	 * Interface to send ELS/CT frames
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	struct fc_seq *(*elsct_send)(struct fc_lport *, u32 did,
+				     struct fc_frame *, unsigned int op,
+				     void (*resp)(struct fc_seq *,
+					     struct fc_frame *, void *arg),
+				     void *arg, u32 timer_msec);
+
+	/*
+	 * Sets up the DDP context for a given exchange id on the given
+	 * scatterlist if LLD supports DDP for large receive.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	int (*ddp_setup)(struct fc_lport *, u16, struct scatterlist *,
+			 unsigned int);
+	/*
+	 * Completes the DDP transfer and returns the length of data DDPed
+	 * for the given exchange id.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	int (*ddp_done)(struct fc_lport *, u16);
+	/*
+	 * Sets up the DDP context for a given exchange id on the given
+	 * scatterlist if LLD supports DDP for target.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	int (*ddp_target)(struct fc_lport *, u16, struct scatterlist *,
+			  unsigned int);
+	/*
+	 * Allow LLD to fill its own Link Error Status Block
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*get_lesb)(struct fc_lport *, struct fc_els_lesb *lesb);
+
+	/*
+	 * Reset an exchange manager, completing all sequences and exchanges.
+	 * If s_id is non-zero, reset only exchanges originating from that FID.
+	 * If d_id is non-zero, reset only exchanges sending to that FID.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*exch_mgr_reset)(struct fc_lport *, u32 s_id, u32 d_id);
+
+	/*
+	 * Set the local port FC_ID.
+	 *
+	 * This may be provided by the LLD to allow it to be
+	 * notified when the local port is assigned a FC-ID.
+	 *
+	 * The frame, if non-NULL, is the incoming frame with the
+	 * FLOGI LS_ACC or FLOGI, and may contain the granted MAC
+	 * address for the LLD.  The frame pointer may be NULL if
+	 * no MAC is associated with this assignment (LOGO or PLOGI).
+	 *
+	 * If FC_ID is non-zero, r_a_tov and e_d_tov must be valid.
+	 *
+	 * Note: this is called with the local port mutex held.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*lport_set_port_id)(struct fc_lport *, u32 port_id,
+				  struct fc_frame *);
+
+	/*
+	 * Callback routine after the remote port is logged in
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*rport_event_callback)(struct fc_lport *,
+				     struct fc_rport_priv *,
+				     enum fc_rport_event);
+
+	/*
+	 * Send a fcp cmd from fsp pkt.
+	 * Called with the SCSI host lock unlocked and irqs disabled.
+	 *
+	 * The resp handler is called when FCP_RSP received.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	int (*fcp_cmd_send)(struct fc_lport *, struct fc_fcp_pkt *,
+			    void (*resp)(struct fc_seq *, struct fc_frame *,
+					 void *));
+
+	/*
+	 * Cleanup the FCP layer, used during link down and reset
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*fcp_cleanup)(struct fc_lport *);
+
+	/*
+	 * Abort all I/O on a local port
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*fcp_abort_io)(struct fc_lport *);
+
+	/*
+	 * Receive a request for the discovery layer.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*disc_recv_req)(struct fc_lport *, struct fc_frame *);
+
+	/*
+	 * Start discovery for a local port.
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*disc_start)(void (*disc_callback)(struct fc_lport *,
+						 enum fc_disc_event),
+			   struct fc_lport *);
+
+	/*
+	 * Stop discovery for a given lport. This will remove
+	 * all discovered rports
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*disc_stop) (struct fc_lport *);
+
+	/*
+	 * Stop discovery for a given lport. This will block
+	 * until all discovered rports are deleted from the
+	 * FC transport class
+	 *
+	 * STATUS: OPTIONAL
+	 */
+	void (*disc_stop_final) (struct fc_lport *);
+};
+
+/**
+ * struct fc_disc - Discovery context
+ * @retry_count:   Number of retries
+ * @pending:       1 if discovery is pending, 0 if not
+ * @requested:     1 if discovery has been requested, 0 if not
+ * @seq_count:     Number of sequences used for discovery
+ * @buf_len:       Length of the discovery buffer
+ * @disc_id:       Discovery ID
+ * @rports:        List of discovered remote ports
+ * @priv:          Private pointer for use by discovery code
+ * @disc_mutex:    Mutex that protects the discovery context
+ * @partial_buf:   Partial name buffer (if names are returned
+ *                 in multiple frames)
+ * @disc_work:     handle for delayed work context
+ * @disc_callback: Callback routine called when discovery completes
+ */
+struct fc_disc {
+	unsigned char         retry_count;
+	unsigned char         pending;
+	unsigned char         requested;
+	unsigned short        seq_count;
+	unsigned char         buf_len;
+	u16                   disc_id;
+
+	struct list_head      rports;
+	void		      *priv;
+	struct mutex	      disc_mutex;
+	struct fc_gpn_ft_resp partial_buf;
+	struct delayed_work   disc_work;
+
+	void (*disc_callback)(struct fc_lport *,
+			      enum fc_disc_event);
+};
+
+/*
+ * Local port notifier and events.
+ */
+extern struct blocking_notifier_head fc_lport_notifier_head;
+enum fc_lport_event {
+	FC_LPORT_EV_ADD,
+	FC_LPORT_EV_DEL,
+};
+
+/**
+ * struct fc_lport - Local port
+ * @host:                  The SCSI host associated with a local port
+ * @ema_list:              Exchange manager anchor list
+ * @dns_rdata:             The directory server remote port
+ * @ms_rdata:		   The management server remote port
+ * @ptp_rdata:             Point to point remote port
+ * @scsi_priv:             FCP layer internal data
+ * @disc:                  Discovery context
+ * @vports:                Child vports if N_Port
+ * @vport:                 Parent vport if VN_Port
+ * @tt:                    Libfc function template
+ * @link_up:               Link state (1 = link up, 0 = link down)
+ * @qfull:                 Queue state (1 queue is full, 0 queue is not full)
+ * @state:                 Identifies the state
+ * @boot_time:             Timestamp indicating when the local port came online
+ * @host_stats:            SCSI host statistics
+ * @stats:                 FC local port stats (TODO separate libfc LLD stats)
+ * @retry_count:           Number of retries in the current state
+ * @port_id:               FC Port ID
+ * @wwpn:                  World Wide Port Name
+ * @wwnn:                  World Wide Node Name
+ * @service_params:        Common service parameters
+ * @e_d_tov:               Error detection timeout value
+ * @r_a_tov:               Resouce allocation timeout value
+ * @rnid_gen:              RNID information
+ * @sg_supp:               Indicates if scatter gather is supported
+ * @seq_offload:           Indicates if sequence offload is supported
+ * @crc_offload:           Indicates if CRC offload is supported
+ * @lro_enabled:           Indicates if large receive offload is supported
+ * @does_npiv:             Supports multiple vports
+ * @npiv_enabled:          Switch/fabric allows NPIV
+ * @mfs:                   The maximum Fibre Channel payload size
+ * @max_retry_count:       The maximum retry attempts
+ * @max_rport_retry_count: The maximum remote port retry attempts
+ * @rport_priv_size:       Size needed by driver after struct fc_rport_priv
+ * @lro_xid:               The maximum XID for LRO
+ * @lso_max:               The maximum large offload send size
+ * @fcts:                  FC-4 type mask
+ * @lp_mutex:              Mutex to protect the local port
+ * @list:                  Linkage on list of vport peers
+ * @retry_work:            Handle to local port for delayed retry context
+ * @prov:		   Pointers available for use by passive FC-4 providers
+ * @lport_list:            Linkage on module-wide list of local ports
+ */
+struct fc_lport {
+	/* Associations */
+	struct Scsi_Host	       *host;
+	struct list_head	       ema_list;
+	struct fc_rport_priv	       *dns_rdata;
+	struct fc_rport_priv	       *ms_rdata;
+	struct fc_rport_priv	       *ptp_rdata;
+	void			       *scsi_priv;
+	struct fc_disc                 disc;
+
+	/* Virtual port information */
+	struct list_head	       vports;
+	struct fc_vport		       *vport;
+
+	/* Operational Information */
+	struct libfc_function_template tt;
+	u8			       link_up;
+	u8			       qfull;
+	u16			       vlan;
+	enum fc_lport_state	       state;
+	unsigned long		       boot_time;
+	struct fc_host_statistics      host_stats;
+	struct fc_stats	__percpu       *stats;
+	u8			       retry_count;
+
+	/* Fabric information */
+	u32                            port_id;
+	u64			       wwpn;
+	u64			       wwnn;
+	unsigned int		       service_params;
+	unsigned int		       e_d_tov;
+	unsigned int		       r_a_tov;
+	struct fc_els_rnid_gen	       rnid_gen;
+
+	/* Capabilities */
+	u32			       sg_supp:1;
+	u32			       seq_offload:1;
+	u32			       crc_offload:1;
+	u32			       lro_enabled:1;
+	u32			       does_npiv:1;
+	u32			       npiv_enabled:1;
+	u32			       point_to_multipoint:1;
+	u32			       fdmi_enabled:1;
+	u32			       mfs;
+	u8			       max_retry_count;
+	u8			       max_rport_retry_count;
+	u16			       rport_priv_size;
+	u16			       link_speed;
+	u16			       link_supported_speeds;
+	u16			       lro_xid;
+	unsigned int		       lso_max;
+	struct fc_ns_fts	       fcts;
+
+	/* Miscellaneous */
+	struct mutex                   lp_mutex;
+	struct list_head               list;
+	struct delayed_work	       retry_work;
+	void			       *prov[FC_FC4_PROV_SIZE];
+	struct list_head               lport_list;
+};
+
+/**
+ * struct fc4_prov - FC-4 provider registration
+ * @prli:               Handler for incoming PRLI
+ * @prlo:               Handler for session reset
+ * @recv:		Handler for incoming request
+ * @module:		Pointer to module.  May be NULL.
+ */
+struct fc4_prov {
+	int (*prli)(struct fc_rport_priv *, u32 spp_len,
+		    const struct fc_els_spp *spp_in,
+		    struct fc_els_spp *spp_out);
+	void (*prlo)(struct fc_rport_priv *);
+	void (*recv)(struct fc_lport *, struct fc_frame *);
+	struct module *module;
+};
+
+/*
+ * Register FC-4 provider with libfc.
+ */
+int fc_fc4_register_provider(enum fc_fh_type type, struct fc4_prov *);
+void fc_fc4_deregister_provider(enum fc_fh_type type, struct fc4_prov *);
+
+/*
+ * FC_LPORT HELPER FUNCTIONS
+ *****************************/
+
+/**
+ * fc_lport_test_ready() - Determine if a local port is in the READY state
+ * @lport: The local port to test
+ */
+static inline int fc_lport_test_ready(struct fc_lport *lport)
+{
+	return lport->state == LPORT_ST_READY;
+}
+
+/**
+ * fc_set_wwnn() - Set the World Wide Node Name of a local port
+ * @lport: The local port whose WWNN is to be set
+ * @wwnn:  The new WWNN
+ */
+static inline void fc_set_wwnn(struct fc_lport *lport, u64 wwnn)
+{
+	lport->wwnn = wwnn;
+}
+
+/**
+ * fc_set_wwpn() - Set the World Wide Port Name of a local port
+ * @lport: The local port whose WWPN is to be set
+ * @wwpn:  The new WWPN
+ */
+static inline void fc_set_wwpn(struct fc_lport *lport, u64 wwpn)
+{
+	lport->wwpn = wwpn;
+}
+
+/**
+ * fc_lport_state_enter() - Change a local port's state
+ * @lport: The local port whose state is to change
+ * @state: The new state
+ */
+static inline void fc_lport_state_enter(struct fc_lport *lport,
+					enum fc_lport_state state)
+{
+	if (state != lport->state)
+		lport->retry_count = 0;
+	lport->state = state;
+}
+
+/**
+ * fc_lport_init_stats() - Allocate per-CPU statistics for a local port
+ * @lport: The local port whose statistics are to be initialized
+ */
+static inline int fc_lport_init_stats(struct fc_lport *lport)
+{
+	lport->stats = alloc_percpu(struct fc_stats);
+	if (!lport->stats)
+		return -ENOMEM;
+	return 0;
+}
+
+/**
+ * fc_lport_free_stats() - Free memory for a local port's statistics
+ * @lport: The local port whose statistics are to be freed
+ */
+static inline void fc_lport_free_stats(struct fc_lport *lport)
+{
+	free_percpu(lport->stats);
+}
+
+/**
+ * lport_priv() - Return the private data from a local port
+ * @lport: The local port whose private data is to be retreived
+ */
+static inline void *lport_priv(const struct fc_lport *lport)
+{
+	return (void *)(lport + 1);
+}
+
+/**
+ * libfc_host_alloc() - Allocate a Scsi_Host with room for a local port and
+ *                      LLD private data
+ * @sht:       The SCSI host template
+ * @priv_size: Size of private data
+ *
+ * Returns: libfc lport
+ */
+static inline struct fc_lport *
+libfc_host_alloc(struct scsi_host_template *sht, int priv_size)
+{
+	struct fc_lport *lport;
+	struct Scsi_Host *shost;
+
+	shost = scsi_host_alloc(sht, sizeof(*lport) + priv_size);
+	if (!shost)
+		return NULL;
+	lport = shost_priv(shost);
+	lport->host = shost;
+	INIT_LIST_HEAD(&lport->ema_list);
+	INIT_LIST_HEAD(&lport->vports);
+	return lport;
+}
+
+/*
+ * FC_FCP HELPER FUNCTIONS
+ *****************************/
+static inline bool fc_fcp_is_read(const struct fc_fcp_pkt *fsp)
+{
+	if (fsp && fsp->cmd)
+		return fsp->cmd->sc_data_direction == DMA_FROM_DEVICE;
+	return false;
+}
+
+/*
+ * LOCAL PORT LAYER
+ *****************************/
+int fc_lport_init(struct fc_lport *);
+int fc_lport_destroy(struct fc_lport *);
+int fc_fabric_logoff(struct fc_lport *);
+int fc_fabric_login(struct fc_lport *);
+void __fc_linkup(struct fc_lport *);
+void fc_linkup(struct fc_lport *);
+void __fc_linkdown(struct fc_lport *);
+void fc_linkdown(struct fc_lport *);
+void fc_vport_setlink(struct fc_lport *);
+void fc_vports_linkchange(struct fc_lport *);
+int fc_lport_config(struct fc_lport *);
+int fc_lport_reset(struct fc_lport *);
+void fc_lport_recv(struct fc_lport *lport, struct fc_frame *fp);
+int fc_set_mfs(struct fc_lport *, u32 mfs);
+struct fc_lport *libfc_vport_create(struct fc_vport *, int privsize);
+struct fc_lport *fc_vport_id_lookup(struct fc_lport *, u32 port_id);
+int fc_lport_bsg_request(struct bsg_job *);
+void fc_lport_set_local_id(struct fc_lport *, u32 port_id);
+void fc_lport_iterate(void (*func)(struct fc_lport *, void *), void *);
+
+/*
+ * REMOTE PORT LAYER
+ *****************************/
+void fc_rport_terminate_io(struct fc_rport *);
+struct fc_rport_priv *fc_rport_lookup(const struct fc_lport *lport,
+				      u32 port_id);
+struct fc_rport_priv *fc_rport_create(struct fc_lport *, u32);
+void fc_rport_destroy(struct kref *kref);
+int fc_rport_login(struct fc_rport_priv *rdata);
+int fc_rport_logoff(struct fc_rport_priv *rdata);
+void fc_rport_recv_req(struct fc_lport *lport, struct fc_frame *fp);
+void fc_rport_flush_queue(void);
+
+/*
+ * DISCOVERY LAYER
+ *****************************/
+void fc_disc_init(struct fc_lport *);
+void fc_disc_config(struct fc_lport *, void *);
+
+static inline struct fc_lport *fc_disc_lport(struct fc_disc *disc)
+{
+	return container_of(disc, struct fc_lport, disc);
+}
+
+/*
+ * FCP LAYER
+ *****************************/
+int fc_fcp_init(struct fc_lport *);
+void fc_fcp_destroy(struct fc_lport *);
+
+/*
+ * SCSI INTERACTION LAYER
+ *****************************/
+int fc_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
+int fc_eh_abort(struct scsi_cmnd *);
+int fc_eh_device_reset(struct scsi_cmnd *);
+int fc_eh_host_reset(struct scsi_cmnd *);
+int fc_slave_alloc(struct scsi_device *);
+
+/*
+ * ELS/CT interface
+ *****************************/
+int fc_elsct_init(struct fc_lport *);
+struct fc_seq *fc_elsct_send(struct fc_lport *, u32 did,
+				    struct fc_frame *,
+				    unsigned int op,
+				    void (*resp)(struct fc_seq *,
+						 struct fc_frame *,
+						 void *arg),
+				    void *arg, u32 timer_msec);
+void fc_lport_flogi_resp(struct fc_seq *, struct fc_frame *, void *);
+void fc_lport_logo_resp(struct fc_seq *, struct fc_frame *, void *);
+void fc_fill_reply_hdr(struct fc_frame *, const struct fc_frame *,
+		       enum fc_rctl, u32 parm_offset);
+void fc_fill_hdr(struct fc_frame *, const struct fc_frame *,
+		 enum fc_rctl, u32 f_ctl, u16 seq_cnt, u32 parm_offset);
+
+
+/*
+ * EXCHANGE MANAGER LAYER
+ *****************************/
+int fc_exch_init(struct fc_lport *);
+void fc_exch_update_stats(struct fc_lport *lport);
+struct fc_seq *fc_exch_seq_send(struct fc_lport *lport,
+				struct fc_frame *fp,
+				void (*resp)(struct fc_seq *,
+					     struct fc_frame *fp,
+					     void *arg),
+				void (*destructor)(struct fc_seq *, void *),
+				void *arg, u32 timer_msec);
+void fc_seq_els_rsp_send(struct fc_frame *, enum fc_els_cmd,
+			 struct fc_seq_els_data *);
+struct fc_seq *fc_seq_start_next(struct fc_seq *sp);
+void fc_seq_set_resp(struct fc_seq *sp,
+		     void (*resp)(struct fc_seq *, struct fc_frame *, void *),
+		     void *arg);
+struct fc_seq *fc_seq_assign(struct fc_lport *lport, struct fc_frame *fp);
+void fc_seq_release(struct fc_seq *sp);
+struct fc_exch_mgr_anchor *fc_exch_mgr_add(struct fc_lport *,
+					   struct fc_exch_mgr *,
+					   bool (*match)(struct fc_frame *));
+void fc_exch_mgr_del(struct fc_exch_mgr_anchor *);
+int fc_exch_mgr_list_clone(struct fc_lport *src, struct fc_lport *dst);
+struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *, enum fc_class class,
+				      u16 min_xid, u16 max_xid,
+				      bool (*match)(struct fc_frame *));
+void fc_exch_mgr_free(struct fc_lport *);
+void fc_exch_recv(struct fc_lport *, struct fc_frame *);
+void fc_exch_mgr_reset(struct fc_lport *, u32 s_id, u32 d_id);
+int fc_seq_send(struct fc_lport *lport, struct fc_seq *sp, struct fc_frame *fp);
+int fc_seq_exch_abort(const struct fc_seq *, unsigned int timer_msec);
+void fc_exch_done(struct fc_seq *sp);
+
+/*
+ * Functions for fc_functions_template
+ */
+void fc_get_host_speed(struct Scsi_Host *);
+void fc_get_host_port_state(struct Scsi_Host *);
+void fc_set_rport_loss_tmo(struct fc_rport *, u32 timeout);
+struct fc_host_statistics *fc_get_host_stats(struct Scsi_Host *);
+
+#endif /* _LIBFC_H_ */
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
new file mode 100644
index 000000000..71a00fb22
--- /dev/null
+++ b/include/scsi/libfcoe.h
@@ -0,0 +1,417 @@
+/*
+ * Copyright (c) 2008-2009 Cisco Systems, Inc.  All rights reserved.
+ * Copyright (c) 2007-2008 Intel Corporation.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _LIBFCOE_H
+#define _LIBFCOE_H
+
+#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/workqueue.h>
+#include <linux/random.h>
+#include <scsi/fc/fc_fcoe.h>
+#include <scsi/libfc.h>
+#include <scsi/fcoe_sysfs.h>
+
+#define FCOE_MAX_CMD_LEN	16	/* Supported CDB length */
+
+/*
+ * Max MTU for FCoE: 14 (FCoE header) + 24 (FC header) + 2112 (max FC payload)
+ * + 4 (FC CRC) + 4 (FCoE trailer) =  2158 bytes
+ */
+#define FCOE_MTU	2158
+
+/*
+ * FIP tunable parameters.
+ */
+#define FCOE_CTLR_START_DELAY	2000	/* mS after first adv. to choose FCF */
+#define FCOE_CTRL_SOL_TOV	2000	/* min. solicitation interval (mS) */
+#define FCOE_CTLR_FCF_LIMIT	20	/* max. number of FCF entries */
+#define FCOE_CTLR_VN2VN_LOGIN_LIMIT 3	/* max. VN2VN rport login retries */
+
+/**
+ * enum fip_state - internal state of FCoE controller.
+ * @FIP_ST_DISABLED: 	controller has been disabled or not yet enabled.
+ * @FIP_ST_LINK_WAIT:	the physical link is down or unusable.
+ * @FIP_ST_AUTO:	determining whether to use FIP or non-FIP mode.
+ * @FIP_ST_NON_FIP:	non-FIP mode selected.
+ * @FIP_ST_ENABLED:	FIP mode selected.
+ * @FIP_ST_VNMP_START:	VN2VN multipath mode start, wait
+ * @FIP_ST_VNMP_PROBE1:	VN2VN sent first probe, listening
+ * @FIP_ST_VNMP_PROBE2:	VN2VN sent second probe, listening
+ * @FIP_ST_VNMP_CLAIM:	VN2VN sent claim, waiting for responses
+ * @FIP_ST_VNMP_UP:	VN2VN multipath mode operation
+ */
+enum fip_state {
+	FIP_ST_DISABLED,
+	FIP_ST_LINK_WAIT,
+	FIP_ST_AUTO,
+	FIP_ST_NON_FIP,
+	FIP_ST_ENABLED,
+	FIP_ST_VNMP_START,
+	FIP_ST_VNMP_PROBE1,
+	FIP_ST_VNMP_PROBE2,
+	FIP_ST_VNMP_CLAIM,
+	FIP_ST_VNMP_UP,
+};
+
+/*
+ * Modes:
+ * The mode is the state that is to be entered after link up.
+ * It must not change after fcoe_ctlr_init() sets it.
+ */
+enum fip_mode {
+	FIP_MODE_AUTO,
+	FIP_MODE_NON_FIP,
+	FIP_MODE_FABRIC,
+	FIP_MODE_VN2VN,
+};
+
+/**
+ * struct fcoe_ctlr - FCoE Controller and FIP state
+ * @state:	   internal FIP state for network link and FIP or non-FIP mode.
+ * @mode:	   LLD-selected mode.
+ * @lp:		   &fc_lport: libfc local port.
+ * @sel_fcf:	   currently selected FCF, or NULL.
+ * @fcfs:	   list of discovered FCFs.
+ * @cdev:          (Optional) pointer to sysfs fcoe_ctlr_device.
+ * @fcf_count:	   number of discovered FCF entries.
+ * @sol_time:	   time when a multicast solicitation was last sent.
+ * @sel_time:	   time after which to select an FCF.
+ * @port_ka_time:  time of next port keep-alive.
+ * @ctlr_ka_time:  time of next controller keep-alive.
+ * @timer:	   timer struct used for all delayed events.
+ * @timer_work:	   &work_struct for doing keep-alives and resets.
+ * @recv_work:	   &work_struct for receiving FIP frames.
+ * @fip_recv_list: list of received FIP frames.
+ * @flogi_req:	   clone of FLOGI request sent
+ * @rnd_state:	   state for pseudo-random number generator.
+ * @port_id:	   proposed or selected local-port ID.
+ * @user_mfs:	   configured maximum FC frame size, including FC header.
+ * @flogi_oxid:    exchange ID of most recent fabric login.
+ * @flogi_req_send: send of FLOGI requested
+ * @flogi_count:   number of FLOGI attempts in AUTO mode.
+ * @map_dest:	   use the FC_MAP mode for destination MAC addresses.
+ * @fip_resp:	   start FIP VLAN discovery responder
+ * @spma:	   supports SPMA server-provided MACs mode
+ * @probe_tries:   number of FC_IDs probed
+ * @priority:      DCBx FCoE APP priority
+ * @dest_addr:	   MAC address of the selected FC forwarder.
+ * @ctl_src_addr:  the native MAC address of our local port.
+ * @send:	   LLD-supplied function to handle sending FIP Ethernet frames
+ * @update_mac:    LLD-supplied function to handle changes to MAC addresses.
+ * @get_src_addr:  LLD-supplied function to supply a source MAC address.
+ * @ctlr_mutex:	   lock protecting this structure.
+ * @ctlr_lock:     spinlock covering flogi_req
+ *
+ * This structure is used by all FCoE drivers.  It contains information
+ * needed by all FCoE low-level drivers (LLDs) as well as internal state
+ * for FIP, and fields shared with the LLDS.
+ */
+struct fcoe_ctlr {
+	enum fip_state state;
+	enum fip_mode mode;
+	struct fc_lport *lp;
+	struct fcoe_fcf *sel_fcf;
+	struct list_head fcfs;
+	struct fcoe_ctlr_device *cdev;
+	u16 fcf_count;
+	unsigned long sol_time;
+	unsigned long sel_time;
+	unsigned long port_ka_time;
+	unsigned long ctlr_ka_time;
+	struct timer_list timer;
+	struct work_struct timer_work;
+	struct work_struct recv_work;
+	struct sk_buff_head fip_recv_list;
+	struct sk_buff *flogi_req;
+
+	struct rnd_state rnd_state;
+	u32 port_id;
+
+	u16 user_mfs;
+	u16 flogi_oxid;
+	u8 flogi_req_send;
+	u8 flogi_count;
+	bool map_dest;
+	bool fip_resp;
+	u8 spma;
+	u8 probe_tries;
+	u8 priority;
+	u8 dest_addr[ETH_ALEN];
+	u8 ctl_src_addr[ETH_ALEN];
+
+	void (*send)(struct fcoe_ctlr *, struct sk_buff *);
+	void (*update_mac)(struct fc_lport *, u8 *addr);
+	u8 * (*get_src_addr)(struct fc_lport *);
+	struct mutex ctlr_mutex;
+	spinlock_t ctlr_lock;
+};
+
+/**
+ * fcoe_ctlr_priv() - Return the private data from a fcoe_ctlr
+ * @cltr: The fcoe_ctlr whose private data will be returned
+ */
+static inline void *fcoe_ctlr_priv(const struct fcoe_ctlr *ctlr)
+{
+	return (void *)(ctlr + 1);
+}
+
+/*
+ * This assumes that the fcoe_ctlr (x) is allocated with the fcoe_ctlr_device.
+ */
+#define fcoe_ctlr_to_ctlr_dev(x)					\
+	(x)->cdev
+
+/**
+ * struct fcoe_fcf - Fibre-Channel Forwarder
+ * @list:	 list linkage
+ * @event_work:  Work for FC Transport actions queue
+ * @event:       The event to be processed
+ * @fip:         The controller that the FCF was discovered on
+ * @fcf_dev:     The associated fcoe_fcf_device instance
+ * @time:	 system time (jiffies) when an advertisement was last received
+ * @switch_name: WWN of switch from advertisement
+ * @fabric_name: WWN of fabric from advertisement
+ * @fc_map:	 FC_MAP value from advertisement
+ * @fcf_mac:	 Ethernet address of the FCF for FIP traffic
+ * @fcoe_mac:	 Ethernet address of the FCF for FCoE traffic
+ * @vfid:	 virtual fabric ID
+ * @pri:	 selection priority, smaller values are better
+ * @flogi_sent:	 current FLOGI sent to this FCF
+ * @flags:	 flags received from advertisement
+ * @fka_period:	 keep-alive period, in jiffies
+ *
+ * A Fibre-Channel Forwarder (FCF) is the entity on the Ethernet that
+ * passes FCoE frames on to an FC fabric.  This structure represents
+ * one FCF from which advertisements have been received.
+ *
+ * When looking up an FCF, @switch_name, @fabric_name, @fc_map, @vfid, and
+ * @fcf_mac together form the lookup key.
+ */
+struct fcoe_fcf {
+	struct list_head list;
+	struct work_struct event_work;
+	struct fcoe_ctlr *fip;
+	struct fcoe_fcf_device *fcf_dev;
+	unsigned long time;
+
+	u64 switch_name;
+	u64 fabric_name;
+	u32 fc_map;
+	u16 vfid;
+	u8 fcf_mac[ETH_ALEN];
+	u8 fcoe_mac[ETH_ALEN];
+
+	u8 pri;
+	u8 flogi_sent;
+	u16 flags;
+	u32 fka_period;
+	u8 fd_flags:1;
+};
+
+#define fcoe_fcf_to_fcf_dev(x)			\
+	((x)->fcf_dev)
+
+/**
+ * struct fcoe_rport - VN2VN remote port
+ * @time:	time of create or last beacon packet received from node
+ * @fcoe_len:	max FCoE frame size, not including VLAN or Ethernet headers
+ * @flags:	flags from probe or claim
+ * @login_count: number of unsuccessful rport logins to this port
+ * @enode_mac:	E_Node control MAC address
+ * @vn_mac:	VN_Node assigned MAC address for data
+ */
+struct fcoe_rport {
+	struct fc_rport_priv rdata;
+	unsigned long time;
+	u16 fcoe_len;
+	u16 flags;
+	u8 login_count;
+	u8 enode_mac[ETH_ALEN];
+	u8 vn_mac[ETH_ALEN];
+};
+
+/* FIP API functions */
+void fcoe_ctlr_init(struct fcoe_ctlr *, enum fip_mode);
+void fcoe_ctlr_destroy(struct fcoe_ctlr *);
+void fcoe_ctlr_link_up(struct fcoe_ctlr *);
+int fcoe_ctlr_link_down(struct fcoe_ctlr *);
+int fcoe_ctlr_els_send(struct fcoe_ctlr *, struct fc_lport *, struct sk_buff *);
+void fcoe_ctlr_recv(struct fcoe_ctlr *, struct sk_buff *);
+int fcoe_ctlr_recv_flogi(struct fcoe_ctlr *, struct fc_lport *,
+			 struct fc_frame *);
+
+/* libfcoe funcs */
+u64 fcoe_wwn_from_mac(unsigned char mac[ETH_ALEN], unsigned int scheme,
+		      unsigned int port);
+int fcoe_libfc_config(struct fc_lport *, struct fcoe_ctlr *,
+		      const struct libfc_function_template *, int init_fcp);
+u32 fcoe_fc_crc(struct fc_frame *fp);
+int fcoe_start_io(struct sk_buff *skb);
+int fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type);
+void __fcoe_get_lesb(struct fc_lport *lport, struct fc_els_lesb *fc_lesb,
+		     struct net_device *netdev);
+void fcoe_wwn_to_str(u64 wwn, char *buf, int len);
+int fcoe_validate_vport_create(struct fc_vport *vport);
+int fcoe_link_speed_update(struct fc_lport *);
+void fcoe_get_lesb(struct fc_lport *, struct fc_els_lesb *);
+void fcoe_ctlr_get_lesb(struct fcoe_ctlr_device *ctlr_dev);
+
+/**
+ * is_fip_mode() - returns true if FIP mode selected.
+ * @fip:	FCoE controller.
+ */
+static inline bool is_fip_mode(struct fcoe_ctlr *fip)
+{
+	return fip->state == FIP_ST_ENABLED;
+}
+
+/* helper for FCoE SW HBA drivers, can include subven and subdev if needed. The
+ * modpost would use pci_device_id table to auto-generate formatted module alias
+ * into the corresponding .mod.c file, but there may or may not be a pci device
+ * id table for FCoE drivers so we use the following helper for build the fcoe
+ * driver module alias.
+ */
+#define MODULE_ALIAS_FCOE_PCI(ven, dev) \
+	MODULE_ALIAS("fcoe-pci:"	\
+		"v" __stringify(ven)	\
+		"d" __stringify(dev) "sv*sd*bc*sc*i*")
+
+/* the name of the default FCoE transport driver fcoe.ko */
+#define FCOE_TRANSPORT_DEFAULT	"fcoe"
+
+/* struct fcoe_transport - The FCoE transport interface
+ * @name:	a vendor specific name for their FCoE transport driver
+ * @attached:	whether this transport is already attached
+ * @list:	list linkage to all attached transports
+ * @match:	handler to allow the transport driver to match up a given netdev
+ * @alloc:      handler to allocate per-instance FCoE structures
+ *		(no discovery or login)
+ * @create:	handler to sysfs entry of create for FCoE instances
+ * @destroy:    handler to delete per-instance FCoE structures
+ *		(frees all memory)
+ * @enable:	handler to sysfs entry of enable for FCoE instances
+ * @disable:	handler to sysfs entry of disable for FCoE instances
+ */
+struct fcoe_transport {
+	char name[IFNAMSIZ];
+	bool attached;
+	struct list_head list;
+	bool (*match) (struct net_device *device);
+	int (*alloc) (struct net_device *device);
+	int (*create) (struct net_device *device, enum fip_mode fip_mode);
+	int (*destroy) (struct net_device *device);
+	int (*enable) (struct net_device *device);
+	int (*disable) (struct net_device *device);
+};
+
+/**
+ * struct fcoe_percpu_s - The context for FCoE receive thread(s)
+ * @kthread:	    The thread context (used by bnx2fc)
+ * @work:	    The work item (used by fcoe)
+ * @fcoe_rx_list:   The queue of pending packets to process
+ * @page:	    The memory page for calculating frame trailer CRCs
+ * @crc_eof_offset: The offset into the CRC page pointing to available
+ *		    memory for a new trailer
+ */
+struct fcoe_percpu_s {
+	struct task_struct *kthread;
+	struct work_struct work;
+	struct sk_buff_head fcoe_rx_list;
+	struct page *crc_eof_page;
+	int crc_eof_offset;
+};
+
+/**
+ * struct fcoe_port - The FCoE private structure
+ * @priv:		       The associated fcoe interface. The structure is
+ *			       defined by the low level driver
+ * @lport:		       The associated local port
+ * @fcoe_pending_queue:	       The pending Rx queue of skbs
+ * @fcoe_pending_queue_active: Indicates if the pending queue is active
+ * @max_queue_depth:	       Max queue depth of pending queue
+ * @min_queue_depth:	       Min queue depth of pending queue
+ * @timer:		       The queue timer
+ * @destroy_work:	       Handle for work context
+ *			       (to prevent RTNL deadlocks)
+ * @data_srt_addr:	       Source address for data
+ *
+ * An instance of this structure is to be allocated along with the
+ * Scsi_Host and libfc fc_lport structures.
+ */
+struct fcoe_port {
+	void		      *priv;
+	struct fc_lport	      *lport;
+	struct sk_buff_head   fcoe_pending_queue;
+	u8		      fcoe_pending_queue_active;
+	u32		      max_queue_depth;
+	u32		      min_queue_depth;
+	struct timer_list     timer;
+	struct work_struct    destroy_work;
+	u8		      data_src_addr[ETH_ALEN];
+	struct net_device * (*get_netdev)(const struct fc_lport *lport);
+};
+
+/**
+ * fcoe_get_netdev() - Return the net device associated with a local port
+ * @lport: The local port to get the net device from
+ */
+static inline struct net_device *fcoe_get_netdev(const struct fc_lport *lport)
+{
+	struct fcoe_port *port = ((struct fcoe_port *)lport_priv(lport));
+
+	return (port->get_netdev) ? port->get_netdev(lport) : NULL;
+}
+
+void fcoe_clean_pending_queue(struct fc_lport *);
+void fcoe_check_wait_queue(struct fc_lport *lport, struct sk_buff *skb);
+void fcoe_queue_timer(struct timer_list *t);
+int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen,
+			   struct fcoe_percpu_s *fps);
+
+/* FCoE Sysfs helpers */
+void fcoe_fcf_get_selected(struct fcoe_fcf_device *);
+void fcoe_ctlr_set_fip_mode(struct fcoe_ctlr_device *);
+
+/**
+ * struct netdev_list
+ * A mapping from netdevice to fcoe_transport
+ */
+struct fcoe_netdev_mapping {
+	struct list_head list;
+	struct net_device *netdev;
+	struct fcoe_transport *ft;
+};
+
+/* fcoe transports registration and deregistration */
+int fcoe_transport_attach(struct fcoe_transport *ft);
+int fcoe_transport_detach(struct fcoe_transport *ft);
+
+/* sysfs store handler for ctrl_control interface */
+ssize_t fcoe_ctlr_create_store(struct bus_type *bus,
+			       const char *buf, size_t count);
+ssize_t fcoe_ctlr_destroy_store(struct bus_type *bus,
+				const char *buf, size_t count);
+
+#endif /* _LIBFCOE_H */
+
+
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
new file mode 100644
index 000000000..647f1e0e7
--- /dev/null
+++ b/include/scsi/libiscsi.h
@@ -0,0 +1,500 @@
+/*
+ * iSCSI lib definitions
+ *
+ * Copyright (C) 2006 Red Hat, Inc.  All rights reserved.
+ * Copyright (C) 2004 - 2006 Mike Christie
+ * Copyright (C) 2004 - 2005 Dmitry Yusupov
+ * Copyright (C) 2004 - 2005 Alex Aizman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#ifndef LIBISCSI_H
+#define LIBISCSI_H
+
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/kfifo.h>
+#include <linux/refcount.h>
+#include <scsi/iscsi_proto.h>
+#include <scsi/iscsi_if.h>
+#include <scsi/scsi_transport_iscsi.h>
+
+struct scsi_transport_template;
+struct scsi_host_template;
+struct scsi_device;
+struct Scsi_Host;
+struct scsi_target;
+struct scsi_cmnd;
+struct socket;
+struct iscsi_transport;
+struct iscsi_cls_session;
+struct iscsi_cls_conn;
+struct iscsi_session;
+struct iscsi_nopin;
+struct device;
+
+#define ISCSI_DEF_XMIT_CMDS_MAX	128	/* must be power of 2 */
+#define ISCSI_MGMT_CMDS_MAX	15
+
+#define ISCSI_DEF_CMD_PER_LUN	32
+
+/* Task Mgmt states */
+enum {
+	TMF_INITIAL,
+	TMF_QUEUED,
+	TMF_SUCCESS,
+	TMF_FAILED,
+	TMF_TIMEDOUT,
+	TMF_NOT_FOUND,
+};
+
+#define ISID_SIZE			6
+
+/* Connection suspend "bit" */
+#define ISCSI_SUSPEND_BIT		1
+
+#define ISCSI_ITT_MASK			0x1fff
+#define ISCSI_TOTAL_CMDS_MAX		4096
+/* this must be a power of two greater than ISCSI_MGMT_CMDS_MAX */
+#define ISCSI_TOTAL_CMDS_MIN		16
+#define ISCSI_AGE_SHIFT			28
+#define ISCSI_AGE_MASK			0xf
+
+#define ISCSI_ADDRESS_BUF_LEN		64
+
+enum {
+	/* this is the maximum possible storage for AHSs */
+	ISCSI_MAX_AHS_SIZE = sizeof(struct iscsi_ecdb_ahdr) +
+				sizeof(struct iscsi_rlength_ahdr),
+	ISCSI_DIGEST_SIZE = sizeof(__u32),
+};
+
+
+enum {
+	ISCSI_TASK_FREE,
+	ISCSI_TASK_COMPLETED,
+	ISCSI_TASK_PENDING,
+	ISCSI_TASK_RUNNING,
+	ISCSI_TASK_ABRT_TMF,		/* aborted due to TMF */
+	ISCSI_TASK_ABRT_SESS_RECOV,	/* aborted due to session recovery */
+	ISCSI_TASK_REQUEUE_SCSIQ,	/* qcmd requeueing to scsi-ml */
+};
+
+struct iscsi_r2t_info {
+	__be32			ttt;		/* copied from R2T */
+	__be32			exp_statsn;	/* copied from R2T */
+	uint32_t		data_length;	/* copied from R2T */
+	uint32_t		data_offset;	/* copied from R2T */
+	int			data_count;	/* DATA-Out payload progress */
+	int			datasn;
+	/* LLDs should set/update these values */
+	int			sent;		/* R2T sequence progress */
+};
+
+struct iscsi_task {
+	/*
+	 * Because LLDs allocate their hdr differently, this is a pointer
+	 * and length to that storage. It must be setup at session
+	 * creation time.
+	 */
+	struct iscsi_hdr	*hdr;
+	unsigned short		hdr_max;
+	unsigned short		hdr_len;	/* accumulated size of hdr used */
+	/* copied values in case we need to send tmfs */
+	itt_t			hdr_itt;
+	__be32			cmdsn;
+	struct scsi_lun		lun;
+
+	int			itt;		/* this ITT */
+
+	unsigned		imm_count;	/* imm-data (bytes)   */
+	/* offset in unsolicited stream (bytes); */
+	struct iscsi_r2t_info	unsol_r2t;
+	char			*data;		/* mgmt payload */
+	unsigned		data_count;
+	struct scsi_cmnd	*sc;		/* associated SCSI cmd*/
+	struct iscsi_conn	*conn;		/* used connection    */
+
+	/* data processing tracking */
+	unsigned long		last_xfer;
+	unsigned long		last_timeout;
+	bool			have_checked_conn;
+
+	/* T10 protection information */
+	bool			protected;
+
+	/* state set/tested under session->lock */
+	int			state;
+	refcount_t		refcount;
+	struct list_head	running;	/* running cmd list */
+	void			*dd_data;	/* driver/transport data */
+};
+
+/* invalid scsi_task pointer */
+#define	INVALID_SCSI_TASK	(struct iscsi_task *)-1l
+
+static inline int iscsi_task_has_unsol_data(struct iscsi_task *task)
+{
+	return task->unsol_r2t.data_length > task->unsol_r2t.sent;
+}
+
+static inline void* iscsi_next_hdr(struct iscsi_task *task)
+{
+	return (void*)task->hdr + task->hdr_len;
+}
+
+/* Connection's states */
+enum {
+	ISCSI_CONN_INITIAL_STAGE,
+	ISCSI_CONN_STARTED,
+	ISCSI_CONN_STOPPED,
+	ISCSI_CONN_CLEANUP_WAIT,
+};
+
+struct iscsi_conn {
+	struct iscsi_cls_conn	*cls_conn;	/* ptr to class connection */
+	void			*dd_data;	/* iscsi_transport data */
+	struct iscsi_session	*session;	/* parent session */
+	/*
+	 * conn_stop() flag: stop to recover, stop to terminate
+	 */
+        int			stop_stage;
+	struct timer_list	transport_timer;
+	unsigned long		last_recv;
+	unsigned long		last_ping;
+	int			ping_timeout;
+	int			recv_timeout;
+	struct iscsi_task 	*ping_task;
+
+	/* iSCSI connection-wide sequencing */
+	uint32_t		exp_statsn;
+	uint32_t		statsn;
+
+	/* control data */
+	int			id;		/* CID */
+	int			c_stage;	/* connection state */
+	/*
+	 * Preallocated buffer for pdus that have data but do not
+	 * originate from scsi-ml. We never have two pdus using the
+	 * buffer at the same time. It is only allocated to
+	 * the default max recv size because the pdus we support
+	 * should always fit in this buffer
+	 */
+	char			*data;
+	struct iscsi_task 	*login_task;	/* mtask used for login/text */
+	struct iscsi_task	*task;		/* xmit task in progress */
+
+	/* xmit */
+	spinlock_t		taskqueuelock;  /* protects the next three lists */
+	struct list_head	mgmtqueue;	/* mgmt (control) xmit queue */
+	struct list_head	cmdqueue;	/* data-path cmd queue */
+	struct list_head	requeue;	/* tasks needing another run */
+	struct work_struct	xmitwork;	/* per-conn. xmit workqueue */
+	unsigned long		suspend_tx;	/* suspend Tx */
+	unsigned long		suspend_rx;	/* suspend Rx */
+
+	/* negotiated params */
+	unsigned		max_recv_dlength; /* initiator_max_recv_dsl*/
+	unsigned		max_xmit_dlength; /* target_max_recv_dsl */
+	int			hdrdgst_en;
+	int			datadgst_en;
+	int			ifmarker_en;
+	int			ofmarker_en;
+	/* values userspace uses to id a conn */
+	int			persistent_port;
+	char			*persistent_address;
+
+	unsigned		max_segment_size;
+	unsigned		tcp_xmit_wsf;
+	unsigned		tcp_recv_wsf;
+	uint16_t		keepalive_tmo;
+	uint16_t		local_port;
+	uint8_t			tcp_timestamp_stat;
+	uint8_t			tcp_nagle_disable;
+	uint8_t			tcp_wsf_disable;
+	uint8_t			tcp_timer_scale;
+	uint8_t			tcp_timestamp_en;
+	uint8_t			fragment_disable;
+	uint8_t			ipv4_tos;
+	uint8_t			ipv6_traffic_class;
+	uint8_t			ipv6_flow_label;
+	uint8_t			is_fw_assigned_ipv6;
+	char			*local_ipaddr;
+
+	/* MIB-statistics */
+	uint64_t		txdata_octets;
+	uint64_t		rxdata_octets;
+	uint32_t		scsicmd_pdus_cnt;
+	uint32_t		dataout_pdus_cnt;
+	uint32_t		scsirsp_pdus_cnt;
+	uint32_t		datain_pdus_cnt;
+	uint32_t		r2t_pdus_cnt;
+	uint32_t		tmfcmd_pdus_cnt;
+	int32_t			tmfrsp_pdus_cnt;
+
+	/* custom statistics */
+	uint32_t		eh_abort_cnt;
+	uint32_t		fmr_unalign_cnt;
+};
+
+struct iscsi_pool {
+	struct kfifo		queue;		/* FIFO Queue */
+	void			**pool;		/* Pool of elements */
+	int			max;		/* Max number of elements */
+};
+
+/* Session's states */
+enum {
+	ISCSI_STATE_FREE = 1,
+	ISCSI_STATE_LOGGED_IN,
+	ISCSI_STATE_FAILED,
+	ISCSI_STATE_TERMINATE,
+	ISCSI_STATE_IN_RECOVERY,
+	ISCSI_STATE_RECOVERY_FAILED,
+	ISCSI_STATE_LOGGING_OUT,
+};
+
+struct iscsi_session {
+	struct iscsi_cls_session *cls_session;
+	/*
+	 * Syncs up the scsi eh thread with the iscsi eh thread when sending
+	 * task management functions. This must be taken before the session
+	 * and recv lock.
+	 */
+	struct mutex		eh_mutex;
+	/* abort */
+	wait_queue_head_t	ehwait;		/* used in eh_abort() */
+	struct iscsi_tm		tmhdr;
+	struct timer_list	tmf_timer;
+	int			tmf_state;	/* see TMF_INITIAL, etc.*/
+
+	/* iSCSI session-wide sequencing */
+	uint32_t		cmdsn;
+	uint32_t		exp_cmdsn;
+	uint32_t		max_cmdsn;
+
+	/* This tracks the reqs queued into the initiator */
+	uint32_t		queued_cmdsn;
+
+	/* configuration */
+	int			abort_timeout;
+	int			lu_reset_timeout;
+	int			tgt_reset_timeout;
+	int			initial_r2t_en;
+	unsigned short		max_r2t;
+	int			imm_data_en;
+	unsigned		first_burst;
+	unsigned		max_burst;
+	int			time2wait;
+	int			time2retain;
+	int			pdu_inorder_en;
+	int			dataseq_inorder_en;
+	int			erl;
+	int			fast_abort;
+	int			tpgt;
+	char			*username;
+	char			*username_in;
+	char			*password;
+	char			*password_in;
+	char			*targetname;
+	char			*targetalias;
+	char			*ifacename;
+	char			*initiatorname;
+	char			*boot_root;
+	char			*boot_nic;
+	char			*boot_target;
+	char			*portal_type;
+	char			*discovery_parent_type;
+	uint16_t		discovery_parent_idx;
+	uint16_t		def_taskmgmt_tmo;
+	uint16_t		tsid;
+	uint8_t			auto_snd_tgt_disable;
+	uint8_t			discovery_sess;
+	uint8_t			chap_auth_en;
+	uint8_t			discovery_logout_en;
+	uint8_t			bidi_chap_en;
+	uint8_t			discovery_auth_optional;
+	uint8_t			isid[ISID_SIZE];
+
+	/* control data */
+	struct iscsi_transport	*tt;
+	struct Scsi_Host	*host;
+	struct iscsi_conn	*leadconn;	/* leading connection */
+	/* Between the forward and the backward locks exists a strict locking
+	 * hierarchy. The mutual exclusion zone protected by the forward lock
+	 * can enclose the mutual exclusion zone protected by the backward lock
+	 * but not vice versa.
+	 */
+	spinlock_t		frwd_lock;	/* protects session state, *
+						 * cmdsn, queued_cmdsn     *
+						 * session resources:      *
+						 * - cmdpool kfifo_out ,   *
+						 * - mgmtpool,		   */
+	spinlock_t		back_lock;	/* protects cmdsn_exp      *
+						 * cmdsn_max,              *
+						 * cmdpool kfifo_in        */
+	int			state;		/* session state           */
+	int			age;		/* counts session re-opens */
+
+	int			scsi_cmds_max; 	/* max scsi commands */
+	int			cmds_max;	/* size of cmds array */
+	struct iscsi_task	**cmds;		/* Original Cmds arr */
+	struct iscsi_pool	cmdpool;	/* PDU's pool */
+	void			*dd_data;	/* LLD private data */
+};
+
+enum {
+	ISCSI_HOST_SETUP,
+	ISCSI_HOST_REMOVED,
+};
+
+struct iscsi_host {
+	char			*initiatorname;
+	/* hw address or netdev iscsi connection is bound to */
+	char			*hwaddress;
+	char			*netdev;
+
+	wait_queue_head_t	session_removal_wq;
+	/* protects sessions and state */
+	spinlock_t		lock;
+	int			num_sessions;
+	int			state;
+
+	struct workqueue_struct	*workq;
+	char			workq_name[20];
+};
+
+/*
+ * scsi host template
+ */
+extern int iscsi_eh_abort(struct scsi_cmnd *sc);
+extern int iscsi_eh_recover_target(struct scsi_cmnd *sc);
+extern int iscsi_eh_session_reset(struct scsi_cmnd *sc);
+extern int iscsi_eh_device_reset(struct scsi_cmnd *sc);
+extern int iscsi_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *sc);
+extern enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc);
+
+/*
+ * iSCSI host helpers.
+ */
+#define iscsi_host_priv(_shost) \
+	(shost_priv(_shost) + sizeof(struct iscsi_host))
+
+extern int iscsi_host_set_param(struct Scsi_Host *shost,
+				enum iscsi_host_param param, char *buf,
+				int buflen);
+extern int iscsi_host_get_param(struct Scsi_Host *shost,
+				enum iscsi_host_param param, char *buf);
+extern int iscsi_host_add(struct Scsi_Host *shost, struct device *pdev);
+extern struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht,
+					  int dd_data_size,
+					  bool xmit_can_sleep);
+extern void iscsi_host_remove(struct Scsi_Host *shost);
+extern void iscsi_host_free(struct Scsi_Host *shost);
+extern int iscsi_target_alloc(struct scsi_target *starget);
+
+/*
+ * session management
+ */
+extern struct iscsi_cls_session *
+iscsi_session_setup(struct iscsi_transport *, struct Scsi_Host *shost,
+		    uint16_t, int, int, uint32_t, unsigned int);
+extern void iscsi_session_teardown(struct iscsi_cls_session *);
+extern void iscsi_session_recovery_timedout(struct iscsi_cls_session *);
+extern int iscsi_set_param(struct iscsi_cls_conn *cls_conn,
+			   enum iscsi_param param, char *buf, int buflen);
+extern int iscsi_session_get_param(struct iscsi_cls_session *cls_session,
+				   enum iscsi_param param, char *buf);
+
+#define iscsi_session_printk(prefix, _sess, fmt, a...)	\
+	iscsi_cls_session_printk(prefix, _sess->cls_session, fmt, ##a)
+
+/*
+ * connection management
+ */
+extern struct iscsi_cls_conn *iscsi_conn_setup(struct iscsi_cls_session *,
+					       int, uint32_t);
+extern void iscsi_conn_teardown(struct iscsi_cls_conn *);
+extern int iscsi_conn_start(struct iscsi_cls_conn *);
+extern void iscsi_conn_stop(struct iscsi_cls_conn *, int);
+extern int iscsi_conn_bind(struct iscsi_cls_session *, struct iscsi_cls_conn *,
+			   int);
+extern void iscsi_conn_failure(struct iscsi_conn *conn, enum iscsi_err err);
+extern void iscsi_session_failure(struct iscsi_session *session,
+				  enum iscsi_err err);
+extern int iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
+				enum iscsi_param param, char *buf);
+extern int iscsi_conn_get_addr_param(struct sockaddr_storage *addr,
+				     enum iscsi_param param, char *buf);
+extern void iscsi_suspend_tx(struct iscsi_conn *conn);
+extern void iscsi_suspend_queue(struct iscsi_conn *conn);
+extern void iscsi_conn_queue_work(struct iscsi_conn *conn);
+
+#define iscsi_conn_printk(prefix, _c, fmt, a...) \
+	iscsi_cls_conn_printk(prefix, ((struct iscsi_conn *)_c)->cls_conn, \
+			      fmt, ##a)
+
+/*
+ * pdu and task processing
+ */
+extern void iscsi_update_cmdsn(struct iscsi_session *, struct iscsi_nopin *);
+extern void iscsi_prep_data_out_pdu(struct iscsi_task *task,
+				    struct iscsi_r2t_info *r2t,
+				    struct iscsi_data *hdr);
+extern int iscsi_conn_send_pdu(struct iscsi_cls_conn *, struct iscsi_hdr *,
+				char *, uint32_t);
+extern int iscsi_complete_pdu(struct iscsi_conn *, struct iscsi_hdr *,
+			      char *, int);
+extern int __iscsi_complete_pdu(struct iscsi_conn *, struct iscsi_hdr *,
+				char *, int);
+extern int iscsi_verify_itt(struct iscsi_conn *, itt_t);
+extern struct iscsi_task *iscsi_itt_to_ctask(struct iscsi_conn *, itt_t);
+extern struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *, itt_t);
+extern void iscsi_requeue_task(struct iscsi_task *task);
+extern void iscsi_put_task(struct iscsi_task *task);
+extern void __iscsi_put_task(struct iscsi_task *task);
+extern void __iscsi_get_task(struct iscsi_task *task);
+extern void iscsi_complete_scsi_task(struct iscsi_task *task,
+				     uint32_t exp_cmdsn, uint32_t max_cmdsn);
+
+/*
+ * generic helpers
+ */
+extern void iscsi_pool_free(struct iscsi_pool *);
+extern int iscsi_pool_init(struct iscsi_pool *, int, void ***, int);
+extern int iscsi_switch_str_param(char **, char *);
+
+/*
+ * inline functions to deal with padding.
+ */
+static inline unsigned int
+iscsi_padded(unsigned int len)
+{
+	return (len + ISCSI_PAD_LEN - 1) & ~(ISCSI_PAD_LEN - 1);
+}
+
+static inline unsigned int
+iscsi_padding(unsigned int len)
+{
+	len &= (ISCSI_PAD_LEN - 1);
+	if (len)
+		len = ISCSI_PAD_LEN - len;
+	return len;
+}
+
+#endif
diff --git a/include/scsi/libiscsi_tcp.h b/include/scsi/libiscsi_tcp.h
new file mode 100644
index 000000000..30520d5ee
--- /dev/null
+++ b/include/scsi/libiscsi_tcp.h
@@ -0,0 +1,137 @@
+/*
+ * iSCSI over TCP/IP Data-Path lib
+ *
+ * Copyright (C) 2008 Mike Christie
+ * Copyright (C) 2008 Red Hat, Inc.  All rights reserved.
+ * maintained by open-iscsi@googlegroups.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * See the file COPYING included with this distribution for more details.
+ */
+
+#ifndef LIBISCSI_TCP_H
+#define LIBISCSI_TCP_H
+
+#include <scsi/libiscsi.h>
+
+struct iscsi_tcp_conn;
+struct iscsi_segment;
+struct sk_buff;
+struct ahash_request;
+
+typedef int iscsi_segment_done_fn_t(struct iscsi_tcp_conn *,
+				    struct iscsi_segment *);
+
+struct iscsi_segment {
+	unsigned char		*data;
+	unsigned int		size;
+	unsigned int		copied;
+	unsigned int		total_size;
+	unsigned int		total_copied;
+
+	struct ahash_request	*hash;
+	unsigned char		padbuf[ISCSI_PAD_LEN];
+	unsigned char		recv_digest[ISCSI_DIGEST_SIZE];
+	unsigned char		digest[ISCSI_DIGEST_SIZE];
+	unsigned int		digest_len;
+
+	struct scatterlist	*sg;
+	void			*sg_mapped;
+	unsigned int		sg_offset;
+	bool			atomic_mapped;
+
+	iscsi_segment_done_fn_t	*done;
+};
+
+/* Socket connection receive helper */
+struct iscsi_tcp_recv {
+	struct iscsi_hdr	*hdr;
+	struct iscsi_segment	segment;
+
+	/* Allocate buffer for BHS + AHS */
+	uint32_t		hdr_buf[64];
+
+	/* copied and flipped values */
+	int			datalen;
+};
+
+struct iscsi_tcp_conn {
+	struct iscsi_conn	*iscsi_conn;
+	void			*dd_data;
+	int			stop_stage;	/* conn_stop() flag: *
+						 * stop to recover,  *
+						 * stop to terminate */
+	/* control data */
+	struct iscsi_tcp_recv	in;		/* TCP receive context */
+	/* CRC32C (Rx) LLD should set this is they do not offload */
+	struct ahash_request	*rx_hash;
+};
+
+struct iscsi_tcp_task {
+	uint32_t		exp_datasn;	/* expected target's R2TSN/DataSN */
+	int			data_offset;
+	struct iscsi_r2t_info	*r2t;		/* in progress solict R2T */
+	struct iscsi_pool	r2tpool;
+	struct kfifo		r2tqueue;
+	void			*dd_data;
+	spinlock_t		pool2queue;
+	spinlock_t		queue2pool;
+};
+
+enum {
+	ISCSI_TCP_SEGMENT_DONE,		/* curr seg has been processed */
+	ISCSI_TCP_SKB_DONE,		/* skb is out of data */
+	ISCSI_TCP_CONN_ERR,		/* iscsi layer has fired a conn err */
+	ISCSI_TCP_SUSPENDED,		/* conn is suspended */
+};
+
+extern void iscsi_tcp_hdr_recv_prep(struct iscsi_tcp_conn *tcp_conn);
+extern int iscsi_tcp_recv_skb(struct iscsi_conn *conn, struct sk_buff *skb,
+			      unsigned int offset, bool offloaded, int *status);
+extern void iscsi_tcp_cleanup_task(struct iscsi_task *task);
+extern int iscsi_tcp_task_init(struct iscsi_task *task);
+extern int iscsi_tcp_task_xmit(struct iscsi_task *task);
+
+/* segment helpers */
+extern int iscsi_tcp_recv_segment_is_hdr(struct iscsi_tcp_conn *tcp_conn);
+extern int iscsi_tcp_segment_done(struct iscsi_tcp_conn *tcp_conn,
+				  struct iscsi_segment *segment, int recv,
+				  unsigned copied);
+extern void iscsi_tcp_segment_unmap(struct iscsi_segment *segment);
+
+extern void iscsi_segment_init_linear(struct iscsi_segment *segment,
+				      void *data, size_t size,
+				      iscsi_segment_done_fn_t *done,
+				      struct ahash_request *hash);
+extern int
+iscsi_segment_seek_sg(struct iscsi_segment *segment,
+		      struct scatterlist *sg_list, unsigned int sg_count,
+		      unsigned int offset, size_t size,
+		      iscsi_segment_done_fn_t *done,
+		      struct ahash_request *hash);
+
+/* digest helpers */
+extern void iscsi_tcp_dgst_header(struct ahash_request *hash, const void *hdr,
+				  size_t hdrlen,
+				  unsigned char digest[ISCSI_DIGEST_SIZE]);
+extern struct iscsi_cls_conn *
+iscsi_tcp_conn_setup(struct iscsi_cls_session *cls_session, int dd_data_size,
+		     uint32_t conn_idx);
+extern void iscsi_tcp_conn_teardown(struct iscsi_cls_conn *cls_conn);
+
+/* misc helpers */
+extern int iscsi_tcp_r2tpool_alloc(struct iscsi_session *session);
+extern void iscsi_tcp_r2tpool_free(struct iscsi_session *session);
+extern int iscsi_tcp_set_max_r2t(struct iscsi_conn *conn, char *buf);
+extern void iscsi_tcp_conn_get_stats(struct iscsi_cls_conn *cls_conn,
+				     struct iscsi_stats *stats);
+#endif /* LIBISCSI_TCP_H */
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
new file mode 100644
index 000000000..3de3b10da
--- /dev/null
+++ b/include/scsi/libsas.h
@@ -0,0 +1,721 @@
+/*
+ * SAS host prototypes and structures header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _LIBSAS_H_
+#define _LIBSAS_H_
+
+
+#include <linux/timer.h>
+#include <linux/pci.h>
+#include <scsi/sas.h>
+#include <linux/libata.h>
+#include <linux/list.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_transport_sas.h>
+#include <linux/scatterlist.h>
+#include <linux/slab.h>
+
+struct block_device;
+
+enum sas_class {
+	SAS,
+	EXPANDER
+};
+
+enum sas_phy_role {
+	PHY_ROLE_NONE = 0,
+	PHY_ROLE_TARGET = 0x40,
+	PHY_ROLE_INITIATOR = 0x80,
+};
+
+enum sas_phy_type {
+        PHY_TYPE_PHYSICAL,
+        PHY_TYPE_VIRTUAL
+};
+
+/* The events are mnemonically described in sas_dump.c
+ * so when updating/adding events here, please also
+ * update the other file too.
+ */
+enum port_event {
+	PORTE_BYTES_DMAED     = 0U,
+	PORTE_BROADCAST_RCVD,
+	PORTE_LINK_RESET_ERR,
+	PORTE_TIMER_EVENT,
+	PORTE_HARD_RESET,
+	PORT_NUM_EVENTS,
+};
+
+enum phy_event {
+	PHYE_LOSS_OF_SIGNAL   = 0U,
+	PHYE_OOB_DONE,
+	PHYE_OOB_ERROR,
+	PHYE_SPINUP_HOLD,             /* hot plug SATA, no COMWAKE sent */
+	PHYE_RESUME_TIMEOUT,
+	PHYE_SHUTDOWN,
+	PHY_NUM_EVENTS,
+};
+
+enum discover_event {
+	DISCE_DISCOVER_DOMAIN   = 0U,
+	DISCE_REVALIDATE_DOMAIN,
+	DISCE_SUSPEND,
+	DISCE_RESUME,
+	DISC_NUM_EVENTS,
+};
+
+/* ---------- Expander Devices ---------- */
+
+#define to_dom_device(_obj) container_of(_obj, struct domain_device, dev_obj)
+#define to_dev_attr(_attr)  container_of(_attr, struct domain_dev_attribute,\
+                                         attr)
+
+enum routing_attribute {
+	DIRECT_ROUTING,
+	SUBTRACTIVE_ROUTING,
+	TABLE_ROUTING,
+};
+
+enum ex_phy_state {
+	PHY_EMPTY,
+	PHY_VACANT,
+	PHY_NOT_PRESENT,
+	PHY_DEVICE_DISCOVERED
+};
+
+struct ex_phy {
+	int    phy_id;
+
+	enum ex_phy_state phy_state;
+
+	enum sas_device_type attached_dev_type;
+	enum sas_linkrate linkrate;
+
+	u8   attached_sata_host:1;
+	u8   attached_sata_dev:1;
+	u8   attached_sata_ps:1;
+
+	enum sas_protocol attached_tproto;
+	enum sas_protocol attached_iproto;
+
+	u8   attached_sas_addr[SAS_ADDR_SIZE];
+	u8   attached_phy_id;
+
+	int phy_change_count;
+	enum routing_attribute routing_attr;
+	u8   virtual:1;
+
+	int  last_da_index;
+
+	struct sas_phy *phy;
+	struct sas_port *port;
+};
+
+struct expander_device {
+	struct list_head children;
+
+	int    ex_change_count;
+	u16    max_route_indexes;
+	u8     num_phys;
+
+	u8     t2t_supp:1;
+	u8     configuring:1;
+	u8     conf_route_table:1;
+
+	u8     enclosure_logical_id[8];
+
+	struct ex_phy *ex_phy;
+	struct sas_port *parent_port;
+
+	struct mutex cmd_mutex;
+};
+
+/* ---------- SATA device ---------- */
+#define ATA_RESP_FIS_SIZE 24
+
+struct sata_device {
+	unsigned int class;
+	u8     port_no;        /* port number, if this is a PM (Port) */
+
+	struct ata_port *ap;
+	struct ata_host *ata_host;
+	struct smp_resp rps_resp ____cacheline_aligned; /* report_phy_sata_resp */
+	u8     fis[ATA_RESP_FIS_SIZE];
+};
+
+struct ssp_device {
+	struct list_head eh_list_node; /* pending a user requested eh action */
+	struct scsi_lun reset_lun;
+};
+
+enum {
+	SAS_DEV_GONE,
+	SAS_DEV_FOUND, /* device notified to lldd */
+	SAS_DEV_DESTROY,
+	SAS_DEV_EH_PENDING,
+	SAS_DEV_LU_RESET,
+	SAS_DEV_RESET,
+};
+
+struct domain_device {
+	spinlock_t done_lock;
+	enum sas_device_type dev_type;
+
+        enum sas_linkrate linkrate;
+        enum sas_linkrate min_linkrate;
+        enum sas_linkrate max_linkrate;
+
+        int  pathways;
+
+        struct domain_device *parent;
+        struct list_head siblings; /* devices on the same level */
+        struct asd_sas_port *port;        /* shortcut to root of the tree */
+	struct sas_phy *phy;
+
+        struct list_head dev_list_node;
+	struct list_head disco_list_node; /* awaiting probe or destruct */
+
+        enum sas_protocol    iproto;
+        enum sas_protocol    tproto;
+
+        struct sas_rphy *rphy;
+
+        u8  sas_addr[SAS_ADDR_SIZE];
+        u8  hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
+
+        u8  frame_rcvd[32];
+
+        union {
+                struct expander_device ex_dev;
+                struct sata_device     sata_dev; /* STP & directly attached */
+		struct ssp_device      ssp_dev;
+        };
+
+        void *lldd_dev;
+	unsigned long state;
+	struct kref kref;
+};
+
+struct sas_work {
+	struct list_head drain_node;
+	struct work_struct work;
+};
+
+static inline void INIT_SAS_WORK(struct sas_work *sw, void (*fn)(struct work_struct *))
+{
+	INIT_WORK(&sw->work, fn);
+	INIT_LIST_HEAD(&sw->drain_node);
+}
+
+struct sas_discovery_event {
+	struct sas_work work;
+	struct asd_sas_port *port;
+};
+
+static inline struct sas_discovery_event *to_sas_discovery_event(struct work_struct *work)
+{
+	struct sas_discovery_event *ev = container_of(work, typeof(*ev), work.work);
+
+	return ev;
+}
+
+struct sas_discovery {
+	struct sas_discovery_event disc_work[DISC_NUM_EVENTS];
+	unsigned long    pending;
+	u8     fanout_sas_addr[8];
+	u8     eeds_a[8];
+	u8     eeds_b[8];
+	int    max_level;
+};
+
+/* The port struct is Class:RW, driver:RO */
+struct asd_sas_port {
+/* private: */
+	struct sas_discovery disc;
+	struct domain_device *port_dev;
+	spinlock_t dev_list_lock;
+	struct list_head dev_list;
+	struct list_head disco_list;
+	struct list_head destroy_list;
+	struct list_head sas_port_del_list;
+	enum   sas_linkrate linkrate;
+
+	struct sas_work work;
+	int suspended;
+
+/* public: */
+	int id;
+
+	enum sas_class   class;
+	u8               sas_addr[SAS_ADDR_SIZE];
+	u8               attached_sas_addr[SAS_ADDR_SIZE];
+	enum sas_protocol   iproto;
+	enum sas_protocol   tproto;
+
+	enum sas_oob_mode oob_mode;
+
+	spinlock_t       phy_list_lock;
+	struct list_head phy_list;
+	int              num_phys;
+	u32              phy_mask;
+
+	struct sas_ha_struct *ha;
+
+	struct sas_port	*port;
+
+	void *lldd_port;	  /* not touched by the sas class code */
+};
+
+struct asd_sas_event {
+	struct sas_work work;
+	struct asd_sas_phy *phy;
+	int event;
+};
+
+static inline struct asd_sas_event *to_asd_sas_event(struct work_struct *work)
+{
+	struct asd_sas_event *ev = container_of(work, typeof(*ev), work.work);
+
+	return ev;
+}
+
+static inline void INIT_SAS_EVENT(struct asd_sas_event *ev,
+		void (*fn)(struct work_struct *),
+		struct asd_sas_phy *phy, int event)
+{
+	INIT_SAS_WORK(&ev->work, fn);
+	ev->phy = phy;
+	ev->event = event;
+}
+
+#define SAS_PHY_SHUTDOWN_THRES   1024
+
+/* The phy pretty much is controlled by the LLDD.
+ * The class only reads those fields.
+ */
+struct asd_sas_phy {
+/* private: */
+	atomic_t event_nr;
+	int in_shutdown;
+	int error;
+	int suspended;
+
+	struct sas_phy *phy;
+
+/* public: */
+	/* The following are class:RO, driver:R/W */
+	int            enabled;	  /* must be set */
+
+	int            id;	  /* must be set */
+	enum sas_class class;
+	enum sas_protocol iproto;
+	enum sas_protocol tproto;
+
+	enum sas_phy_type  type;
+	enum sas_phy_role  role;
+	enum sas_oob_mode  oob_mode;
+	enum sas_linkrate linkrate;
+
+	u8   *sas_addr;		  /* must be set */
+	u8   attached_sas_addr[SAS_ADDR_SIZE]; /* class:RO, driver: R/W */
+
+	spinlock_t     frame_rcvd_lock;
+	u8             *frame_rcvd; /* must be set */
+	int            frame_rcvd_size;
+
+	spinlock_t     sas_prim_lock;
+	u32            sas_prim;
+
+	struct list_head port_phy_el; /* driver:RO */
+	struct asd_sas_port      *port; /* Class:RW, driver: RO */
+
+	struct sas_ha_struct *ha; /* may be set; the class sets it anyway */
+
+	void *lldd_phy;		  /* not touched by the sas_class_code */
+};
+
+struct scsi_core {
+	struct Scsi_Host *shost;
+
+};
+
+enum sas_ha_state {
+	SAS_HA_REGISTERED,
+	SAS_HA_DRAINING,
+	SAS_HA_ATA_EH_ACTIVE,
+	SAS_HA_FROZEN,
+};
+
+struct sas_ha_struct {
+/* private: */
+	struct list_head  defer_q; /* work queued while draining */
+	struct mutex	  drain_mutex;
+	unsigned long	  state;
+	spinlock_t	  lock;
+	int		  eh_active;
+	wait_queue_head_t eh_wait_q;
+	struct list_head  eh_dev_q;
+
+	struct mutex disco_mutex;
+
+	struct scsi_core core;
+
+/* public: */
+	char *sas_ha_name;
+	struct device *dev;	  /* should be set */
+	struct module *lldd_module; /* should be set */
+
+	struct workqueue_struct *event_q;
+	struct workqueue_struct *disco_q;
+
+	u8 *sas_addr;		  /* must be set */
+	u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
+
+	spinlock_t      phy_port_lock;
+	struct asd_sas_phy  **sas_phy; /* array of valid pointers, must be set */
+	struct asd_sas_port **sas_port; /* array of valid pointers, must be set */
+	int             num_phys; /* must be set, gt 0, static */
+
+	int strict_wide_ports; /* both sas_addr and attached_sas_addr must match
+				* their siblings when forming wide ports */
+
+	/* LLDD calls these to notify the class of an event. */
+	int (*notify_port_event)(struct asd_sas_phy *, enum port_event);
+	int (*notify_phy_event)(struct asd_sas_phy *, enum phy_event);
+
+	void *lldd_ha;		  /* not touched by sas class code */
+
+	struct list_head eh_done_q;  /* complete via scsi_eh_flush_done_q */
+	struct list_head eh_ata_q; /* scmds to promote from sas to ata eh */
+
+	int event_thres;
+};
+
+#define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata)
+
+static inline struct domain_device *
+starget_to_domain_dev(struct scsi_target *starget) {
+	return starget->hostdata;
+}
+
+static inline struct domain_device *
+sdev_to_domain_dev(struct scsi_device *sdev) {
+	return starget_to_domain_dev(sdev->sdev_target);
+}
+
+static inline struct ata_device *sas_to_ata_dev(struct domain_device *dev)
+{
+	return &dev->sata_dev.ap->link.device[0];
+}
+
+static inline struct domain_device *
+cmd_to_domain_dev(struct scsi_cmnd *cmd)
+{
+	return sdev_to_domain_dev(cmd->device);
+}
+
+void sas_hash_addr(u8 *hashed, const u8 *sas_addr);
+
+/* Before calling a notify event, LLDD should use this function
+ * when the link is severed (possibly from its tasklet).
+ * The idea is that the Class only reads those, while the LLDD,
+ * can R/W these (thus avoiding a race).
+ */
+static inline void sas_phy_disconnected(struct asd_sas_phy *phy)
+{
+	phy->oob_mode = OOB_NOT_CONNECTED;
+	phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+}
+
+static inline unsigned int to_sas_gpio_od(int device, int bit)
+{
+	return 3 * device + bit;
+}
+
+static inline void sas_put_local_phy(struct sas_phy *phy)
+{
+	put_device(&phy->dev);
+}
+
+#ifdef CONFIG_SCSI_SAS_HOST_SMP
+int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count);
+#else
+static inline int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count)
+{
+	return -1;
+}
+#endif
+
+/* ---------- Tasks ---------- */
+/*
+      service_response |  SAS_TASK_COMPLETE  |  SAS_TASK_UNDELIVERED |
+  exec_status          |                     |                       |
+  ---------------------+---------------------+-----------------------+
+       SAM_...         |         X           |                       |
+       DEV_NO_RESPONSE |         X           |           X           |
+       INTERRUPTED     |         X           |                       |
+       QUEUE_FULL      |                     |           X           |
+       DEVICE_UNKNOWN  |                     |           X           |
+       SG_ERR          |                     |           X           |
+  ---------------------+---------------------+-----------------------+
+ */
+
+enum service_response {
+	SAS_TASK_COMPLETE,
+	SAS_TASK_UNDELIVERED = -1,
+};
+
+enum exec_status {
+	/* The SAM_STAT_.. codes fit in the lower 6 bits, alias some of
+	 * them here to silence 'case value not in enumerated type' warnings
+	 */
+	__SAM_STAT_CHECK_CONDITION = SAM_STAT_CHECK_CONDITION,
+
+	SAS_DEV_NO_RESPONSE = 0x80,
+	SAS_DATA_UNDERRUN,
+	SAS_DATA_OVERRUN,
+	SAS_INTERRUPTED,
+	SAS_QUEUE_FULL,
+	SAS_DEVICE_UNKNOWN,
+	SAS_SG_ERR,
+	SAS_OPEN_REJECT,
+	SAS_OPEN_TO,
+	SAS_PROTO_RESPONSE,
+	SAS_PHY_DOWN,
+	SAS_NAK_R_ERR,
+	SAS_PENDING,
+	SAS_ABORTED_TASK,
+};
+
+/* When a task finishes with a response, the LLDD examines the
+ * response:
+ * 	- For an ATA task task_status_struct::stat is set to
+ * SAS_PROTO_RESPONSE, and the task_status_struct::buf is set to the
+ * contents of struct ata_task_resp.
+ * 	- For SSP tasks, if no data is present or status/TMF response
+ * is valid, task_status_struct::stat is set.  If data is present
+ * (SENSE data), the LLDD copies up to SAS_STATUS_BUF_SIZE, sets
+ * task_status_struct::buf_valid_size, and task_status_struct::stat is
+ * set to SAM_CHECK_COND.
+ *
+ * "buf" has format SCSI Sense for SSP task, or struct ata_task_resp
+ * for ATA task.
+ *
+ * "frame_len" is the total frame length, which could be more or less
+ * than actually copied.
+ *
+ * Tasks ending with response, always set the residual field.
+ */
+struct ata_task_resp {
+	u16  frame_len;
+	u8   ending_fis[ATA_RESP_FIS_SIZE];	  /* dev to host or data-in */
+};
+
+#define SAS_STATUS_BUF_SIZE 96
+
+struct task_status_struct {
+	enum service_response resp;
+	enum exec_status      stat;
+	int  buf_valid_size;
+
+	u8   buf[SAS_STATUS_BUF_SIZE];
+
+	u32  residual;
+	enum sas_open_rej_reason open_rej_reason;
+};
+
+/* ATA and ATAPI task queuable to a SAS LLDD.
+ */
+struct sas_ata_task {
+	struct host_to_dev_fis fis;
+	u8     atapi_packet[16];  /* 0 if not ATAPI task */
+
+	u8     retry_count;	  /* hardware retry, should be > 0 */
+
+	u8     dma_xfer:1;	  /* PIO:0 or DMA:1 */
+	u8     use_ncq:1;
+	u8     set_affil_pol:1;
+	u8     stp_affil_pol:1;
+
+	u8     device_control_reg_update:1;
+};
+
+struct sas_smp_task {
+	struct scatterlist smp_req;
+	struct scatterlist smp_resp;
+};
+
+enum task_attribute {
+	TASK_ATTR_SIMPLE = 0,
+	TASK_ATTR_HOQ    = 1,
+	TASK_ATTR_ORDERED= 2,
+	TASK_ATTR_ACA    = 4,
+};
+
+struct sas_ssp_task {
+	u8     retry_count;	  /* hardware retry, should be > 0 */
+
+	u8     LUN[8];
+	u8     enable_first_burst:1;
+	enum   task_attribute task_attr;
+	u8     task_prio;
+	struct scsi_cmnd *cmd;
+};
+
+struct sas_task {
+	struct domain_device *dev;
+
+	spinlock_t   task_state_lock;
+	unsigned     task_state_flags;
+
+	enum   sas_protocol      task_proto;
+
+	union {
+		struct sas_ata_task ata_task;
+		struct sas_smp_task smp_task;
+		struct sas_ssp_task ssp_task;
+	};
+
+	struct scatterlist *scatter;
+	int    num_scatter;
+	u32    total_xfer_len;
+	u8     data_dir:2;	  /* Use PCI_DMA_... */
+
+	struct task_status_struct task_status;
+	void   (*task_done)(struct sas_task *);
+
+	void   *lldd_task;	  /* for use by LLDDs */
+	void   *uldd_task;
+	struct sas_task_slow *slow_task;
+};
+
+struct sas_task_slow {
+	/* standard/extra infrastructure for slow path commands (SMP and
+	 * internal lldd commands
+	 */
+	struct timer_list     timer;
+	struct completion     completion;
+	struct sas_task       *task;
+};
+
+#define SAS_TASK_STATE_PENDING      1
+#define SAS_TASK_STATE_DONE         2
+#define SAS_TASK_STATE_ABORTED      4
+#define SAS_TASK_NEED_DEV_RESET     8
+#define SAS_TASK_AT_INITIATOR       16
+
+extern struct sas_task *sas_alloc_task(gfp_t flags);
+extern struct sas_task *sas_alloc_slow_task(gfp_t flags);
+extern void sas_free_task(struct sas_task *task);
+
+struct sas_domain_function_template {
+	/* The class calls these to notify the LLDD of an event. */
+	void (*lldd_port_formed)(struct asd_sas_phy *);
+	void (*lldd_port_deformed)(struct asd_sas_phy *);
+
+	/* The class calls these when a device is found or gone. */
+	int  (*lldd_dev_found)(struct domain_device *);
+	void (*lldd_dev_gone)(struct domain_device *);
+
+	int (*lldd_execute_task)(struct sas_task *, gfp_t gfp_flags);
+
+	/* Task Management Functions. Must be called from process context. */
+	int (*lldd_abort_task)(struct sas_task *);
+	int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
+	int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
+	int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
+	int (*lldd_I_T_nexus_reset)(struct domain_device *);
+	int (*lldd_ata_check_ready)(struct domain_device *);
+	void (*lldd_ata_set_dmamode)(struct domain_device *);
+	int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
+	int (*lldd_query_task)(struct sas_task *);
+
+	/* Port and Adapter management */
+	int (*lldd_clear_nexus_port)(struct asd_sas_port *);
+	int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
+
+	/* Phy management */
+	int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func, void *);
+
+	/* GPIO support */
+	int (*lldd_write_gpio)(struct sas_ha_struct *, u8 reg_type,
+			       u8 reg_index, u8 reg_count, u8 *write_data);
+};
+
+extern int sas_register_ha(struct sas_ha_struct *);
+extern int sas_unregister_ha(struct sas_ha_struct *);
+extern void sas_prep_resume_ha(struct sas_ha_struct *sas_ha);
+extern void sas_resume_ha(struct sas_ha_struct *sas_ha);
+extern void sas_suspend_ha(struct sas_ha_struct *sas_ha);
+
+int sas_set_phy_speed(struct sas_phy *phy,
+		      struct sas_phy_linkrates *rates);
+int sas_phy_reset(struct sas_phy *phy, int hard_reset);
+extern int sas_queuecommand(struct Scsi_Host * ,struct scsi_cmnd *);
+extern int sas_target_alloc(struct scsi_target *);
+extern int sas_slave_configure(struct scsi_device *);
+extern int sas_change_queue_depth(struct scsi_device *, int new_depth);
+extern int sas_bios_param(struct scsi_device *,
+			  struct block_device *,
+			  sector_t capacity, int *hsc);
+extern struct scsi_transport_template *
+sas_domain_attach_transport(struct sas_domain_function_template *);
+extern struct device_attribute dev_attr_phy_event_threshold;
+
+int  sas_discover_root_expander(struct domain_device *);
+
+void sas_init_ex_attr(void);
+
+int  sas_ex_revalidate_domain(struct domain_device *);
+
+void sas_unregister_domain_devices(struct asd_sas_port *port, int gone);
+void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *);
+int  sas_discover_event(struct asd_sas_port *, enum discover_event ev);
+
+int  sas_discover_sata(struct domain_device *);
+int  sas_discover_end_dev(struct domain_device *);
+
+void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *);
+
+void sas_init_dev(struct domain_device *);
+
+void sas_task_abort(struct sas_task *);
+int sas_eh_abort_handler(struct scsi_cmnd *cmd);
+int sas_eh_device_reset_handler(struct scsi_cmnd *cmd);
+int sas_eh_target_reset_handler(struct scsi_cmnd *cmd);
+
+extern void sas_target_destroy(struct scsi_target *);
+extern int sas_slave_alloc(struct scsi_device *);
+extern int sas_ioctl(struct scsi_device *sdev, int cmd, void __user *arg);
+extern int sas_drain_work(struct sas_ha_struct *ha);
+
+extern void sas_ssp_task_response(struct device *dev, struct sas_task *task,
+				  struct ssp_response_iu *iu);
+struct sas_phy *sas_get_local_phy(struct domain_device *dev);
+
+int sas_request_addr(struct Scsi_Host *shost, u8 *addr);
+
+#endif /* _SASLIB_H_ */
diff --git a/include/scsi/osd_attributes.h b/include/scsi/osd_attributes.h
new file mode 100644
index 000000000..8a6acd054
--- /dev/null
+++ b/include/scsi/osd_attributes.h
@@ -0,0 +1,398 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __OSD_ATTRIBUTES_H__
+#define __OSD_ATTRIBUTES_H__
+
+#include <scsi/osd_protocol.h>
+
+/*
+ * Contains types and constants that define attribute pages and attribute
+ * numbers and their data types.
+ */
+
+#define ATTR_SET(pg, id, l, ptr) \
+	{ .attr_page = pg, .attr_id = id, .len = l, .val_ptr = ptr }
+
+#define ATTR_DEF(pg, id, l) ATTR_SET(pg, id, l, NULL)
+
+/* osd-r10 4.7.3 Attributes pages */
+enum {
+	OSD_APAGE_OBJECT_FIRST		= 0x0,
+	OSD_APAGE_OBJECT_DIRECTORY	= 0,
+	OSD_APAGE_OBJECT_INFORMATION	= 1,
+	OSD_APAGE_OBJECT_QUOTAS		= 2,
+	OSD_APAGE_OBJECT_TIMESTAMP	= 3,
+	OSD_APAGE_OBJECT_COLLECTIONS	= 4,
+	OSD_APAGE_OBJECT_SECURITY	= 5,
+	OSD_APAGE_OBJECT_LAST		= 0x2fffffff,
+
+	OSD_APAGE_PARTITION_FIRST	= 0x30000000,
+	OSD_APAGE_PARTITION_DIRECTORY	= OSD_APAGE_PARTITION_FIRST + 0,
+	OSD_APAGE_PARTITION_INFORMATION = OSD_APAGE_PARTITION_FIRST + 1,
+	OSD_APAGE_PARTITION_QUOTAS	= OSD_APAGE_PARTITION_FIRST + 2,
+	OSD_APAGE_PARTITION_TIMESTAMP	= OSD_APAGE_PARTITION_FIRST + 3,
+	OSD_APAGE_PARTITION_ATTR_ACCESS = OSD_APAGE_PARTITION_FIRST + 4,
+	OSD_APAGE_PARTITION_SECURITY	= OSD_APAGE_PARTITION_FIRST + 5,
+	OSD_APAGE_PARTITION_LAST	= 0x5FFFFFFF,
+
+	OSD_APAGE_COLLECTION_FIRST	= 0x60000000,
+	OSD_APAGE_COLLECTION_DIRECTORY	= OSD_APAGE_COLLECTION_FIRST + 0,
+	OSD_APAGE_COLLECTION_INFORMATION = OSD_APAGE_COLLECTION_FIRST + 1,
+	OSD_APAGE_COLLECTION_TIMESTAMP	= OSD_APAGE_COLLECTION_FIRST + 3,
+	OSD_APAGE_COLLECTION_SECURITY	= OSD_APAGE_COLLECTION_FIRST + 5,
+	OSD_APAGE_COLLECTION_LAST	= 0x8FFFFFFF,
+
+	OSD_APAGE_ROOT_FIRST		= 0x90000000,
+	OSD_APAGE_ROOT_DIRECTORY	= OSD_APAGE_ROOT_FIRST + 0,
+	OSD_APAGE_ROOT_INFORMATION	= OSD_APAGE_ROOT_FIRST + 1,
+	OSD_APAGE_ROOT_QUOTAS		= OSD_APAGE_ROOT_FIRST + 2,
+	OSD_APAGE_ROOT_TIMESTAMP	= OSD_APAGE_ROOT_FIRST + 3,
+	OSD_APAGE_ROOT_SECURITY		= OSD_APAGE_ROOT_FIRST + 5,
+	OSD_APAGE_ROOT_LAST		= 0xBFFFFFFF,
+
+	OSD_APAGE_RESERVED_TYPE_FIRST	= 0xC0000000,
+	OSD_APAGE_RESERVED_TYPE_LAST	= 0xEFFFFFFF,
+
+	OSD_APAGE_COMMON_FIRST		= 0xF0000000,
+	OSD_APAGE_COMMON_LAST		= 0xFFFFFFFD,
+
+	OSD_APAGE_CURRENT_COMMAND	= 0xFFFFFFFE,
+
+	OSD_APAGE_REQUEST_ALL		= 0xFFFFFFFF,
+};
+
+/* subcategories of attr pages within each range above */
+enum {
+	OSD_APAGE_STD_FIRST		= 0x0,
+	OSD_APAGE_STD_DIRECTORY		= 0,
+	OSD_APAGE_STD_INFORMATION	= 1,
+	OSD_APAGE_STD_QUOTAS		= 2,
+	OSD_APAGE_STD_TIMESTAMP		= 3,
+	OSD_APAGE_STD_COLLECTIONS	= 4,
+	OSD_APAGE_STD_POLICY_SECURITY	= 5,
+	OSD_APAGE_STD_LAST		= 0x0000007F,
+
+	OSD_APAGE_RESERVED_FIRST	= 0x00000080,
+	OSD_APAGE_RESERVED_LAST		= 0x00007FFF,
+
+	OSD_APAGE_OTHER_STD_FIRST	= 0x00008000,
+	OSD_APAGE_OTHER_STD_LAST	= 0x0000EFFF,
+
+	OSD_APAGE_PUBLIC_FIRST		= 0x0000F000,
+	OSD_APAGE_PUBLIC_LAST		= 0x0000FFFF,
+
+	OSD_APAGE_APP_DEFINED_FIRST	= 0x00010000,
+	OSD_APAGE_APP_DEFINED_LAST	= 0x1FFFFFFF,
+
+	OSD_APAGE_VENDOR_SPECIFIC_FIRST	= 0x20000000,
+	OSD_APAGE_VENDOR_SPECIFIC_LAST	= 0x2FFFFFFF,
+};
+
+enum {
+	OSD_ATTR_PAGE_IDENTIFICATION = 0, /* in all pages 40 bytes */
+};
+
+struct page_identification {
+	u8 vendor_identification[8];
+	u8 page_identification[32];
+}  __packed;
+
+struct osd_attr_page_header {
+	__be32 page_number;
+	__be32 page_length;
+} __packed;
+
+/* 7.1.2.8 Root Information attributes page (OSD_APAGE_ROOT_INFORMATION) */
+enum {
+	OSD_ATTR_RI_OSD_SYSTEM_ID            = 0x3,   /* 20       */
+	OSD_ATTR_RI_VENDOR_IDENTIFICATION    = 0x4,   /* 8        */
+	OSD_ATTR_RI_PRODUCT_IDENTIFICATION   = 0x5,   /* 16       */
+	OSD_ATTR_RI_PRODUCT_MODEL            = 0x6,   /* 32       */
+	OSD_ATTR_RI_PRODUCT_REVISION_LEVEL   = 0x7,   /* 4        */
+	OSD_ATTR_RI_PRODUCT_SERIAL_NUMBER    = 0x8,   /* variable */
+	OSD_ATTR_RI_OSD_NAME                 = 0x9,   /* variable */
+	OSD_ATTR_RI_MAX_CDB_CONTINUATION_LEN = 0xA,   /* 4        */
+	OSD_ATTR_RI_TOTAL_CAPACITY           = 0x80,  /* 8        */
+	OSD_ATTR_RI_USED_CAPACITY            = 0x81,  /* 8        */
+	OSD_ATTR_RI_NUMBER_OF_PARTITIONS     = 0xC0,  /* 8        */
+	OSD_ATTR_RI_CLOCK                    = 0x100, /* 6        */
+	OARI_DEFAULT_ISOLATION_METHOD        = 0X110, /* 1        */
+	OARI_SUPPORTED_ISOLATION_METHODS     = 0X111, /* 32       */
+
+	OARI_DATA_ATOMICITY_GUARANTEE                   = 0X120,   /* 8       */
+	OARI_DATA_ATOMICITY_ALIGNMENT                   = 0X121,   /* 8       */
+	OARI_ATTRIBUTES_ATOMICITY_GUARANTEE             = 0X122,   /* 8       */
+	OARI_DATA_ATTRIBUTES_ATOMICITY_MULTIPLIER       = 0X123,   /* 1       */
+
+	OARI_MAXIMUM_SNAPSHOTS_COUNT                    = 0X1C1,    /* 0 or 4 */
+	OARI_MAXIMUM_CLONES_COUNT                       = 0X1C2,    /* 0 or 4 */
+	OARI_MAXIMUM_BRANCH_DEPTH                       = 0X1CC,    /* 0 or 4 */
+	OARI_SUPPORTED_OBJECT_DUPLICATION_METHOD_FIRST  = 0X200,    /* 0 or 4 */
+	OARI_SUPPORTED_OBJECT_DUPLICATION_METHOD_LAST   = 0X2ff,    /* 0 or 4 */
+	OARI_SUPPORTED_TIME_OF_DUPLICATION_METHOD_FIRST = 0X300,    /* 0 or 4 */
+	OARI_SUPPORTED_TIME_OF_DUPLICATION_METHOD_LAST  = 0X30F,    /* 0 or 4 */
+	OARI_SUPPORT_FOR_DUPLICATED_OBJECT_FREEZING     = 0X310,    /* 0 or 4 */
+	OARI_SUPPORT_FOR_SNAPSHOT_REFRESHING            = 0X311,    /* 0 or 1 */
+	OARI_SUPPORTED_CDB_CONTINUATION_DESC_TYPE_FIRST = 0X7000001,/* 0 or 4 */
+	OARI_SUPPORTED_CDB_CONTINUATION_DESC_TYPE_LAST  = 0X700FFFF,/* 0 or 4 */
+};
+/* Root_Information_attributes_page does not have a get_page structure */
+
+/* 7.1.2.9 Partition Information attributes page
+ * (OSD_APAGE_PARTITION_INFORMATION)
+ */
+enum {
+	OSD_ATTR_PI_PARTITION_ID            = 0x1,     /* 8        */
+	OSD_ATTR_PI_USERNAME                = 0x9,     /* variable */
+	OSD_ATTR_PI_USED_CAPACITY           = 0x81,    /* 8        */
+	OSD_ATTR_PI_USED_CAPACITY_INCREMENT = 0x84,    /* 0 or 8   */
+	OSD_ATTR_PI_NUMBER_OF_OBJECTS       = 0xC1,    /* 8        */
+
+	OSD_ATTR_PI_ACTUAL_DATA_SPACE                      = 0xD1, /* 0 or 8 */
+	OSD_ATTR_PI_RESERVED_DATA_SPACE                    = 0xD2, /* 0 or 8 */
+	OSD_ATTR_PI_DEFAULT_SNAPSHOT_DUPLICATION_METHOD    = 0x200,/* 0 or 4 */
+	OSD_ATTR_PI_DEFAULT_CLONE_DUPLICATION_METHOD       = 0x201,/* 0 or 4 */
+	OSD_ATTR_PI_DEFAULT_SP_TIME_OF_DUPLICATION         = 0x300,/* 0 or 4 */
+	OSD_ATTR_PI_DEFAULT_CLONE_TIME_OF_DUPLICATION      = 0x301,/* 0 or 4 */
+};
+/* Partition Information attributes page does not have a get_page structure */
+
+/* 7.1.2.10 Collection Information attributes page
+ * (OSD_APAGE_COLLECTION_INFORMATION)
+ */
+enum {
+	OSD_ATTR_CI_PARTITION_ID           = 0x1,       /* 8        */
+	OSD_ATTR_CI_COLLECTION_OBJECT_ID   = 0x2,       /* 8        */
+	OSD_ATTR_CI_USERNAME               = 0x9,       /* variable */
+	OSD_ATTR_CI_COLLECTION_TYPE        = 0xA,       /* 1        */
+	OSD_ATTR_CI_USED_CAPACITY          = 0x81,      /* 8        */
+};
+/* Collection Information attributes page does not have a get_page structure */
+
+/* 7.1.2.11 User Object Information attributes page
+ * (OSD_APAGE_OBJECT_INFORMATION)
+ */
+enum {
+	OSD_ATTR_OI_PARTITION_ID         = 0x1,       /* 8        */
+	OSD_ATTR_OI_OBJECT_ID            = 0x2,       /* 8        */
+	OSD_ATTR_OI_USERNAME             = 0x9,       /* variable */
+	OSD_ATTR_OI_USED_CAPACITY        = 0x81,      /* 8        */
+	OSD_ATTR_OI_LOGICAL_LENGTH       = 0x82,      /* 8        */
+	SD_ATTR_OI_ACTUAL_DATA_SPACE     = 0XD1,      /* 0 OR 8   */
+	SD_ATTR_OI_RESERVED_DATA_SPACE   = 0XD2,      /* 0 OR 8   */
+};
+/* Object Information attributes page does not have a get_page structure */
+
+/* 7.1.2.12 Root Quotas attributes page (OSD_APAGE_ROOT_QUOTAS) */
+enum {
+	OSD_ATTR_RQ_DEFAULT_MAXIMUM_USER_OBJECT_LENGTH     = 0x1,      /* 8  */
+	OSD_ATTR_RQ_PARTITION_CAPACITY_QUOTA               = 0x10001,  /* 8  */
+	OSD_ATTR_RQ_PARTITION_OBJECT_COUNT                 = 0x10002,  /* 8  */
+	OSD_ATTR_RQ_PARTITION_COLLECTIONS_PER_USER_OBJECT  = 0x10081,  /* 4  */
+	OSD_ATTR_RQ_PARTITION_COUNT                        = 0x20002,  /* 8  */
+};
+
+struct Root_Quotas_attributes_page {
+	struct osd_attr_page_header hdr; /* id=R+2, size=0x24 */
+	__be64 default_maximum_user_object_length;
+	__be64 partition_capacity_quota;
+	__be64 partition_object_count;
+	__be64 partition_collections_per_user_object;
+	__be64 partition_count;
+}  __packed;
+
+/* 7.1.2.13 Partition Quotas attributes page (OSD_APAGE_PARTITION_QUOTAS)*/
+enum {
+	OSD_ATTR_PQ_DEFAULT_MAXIMUM_USER_OBJECT_LENGTH  = 0x1,        /* 8 */
+	OSD_ATTR_PQ_CAPACITY_QUOTA                      = 0x10001,    /* 8 */
+	OSD_ATTR_PQ_OBJECT_COUNT                        = 0x10002,    /* 8 */
+	OSD_ATTR_PQ_COLLECTIONS_PER_USER_OBJECT         = 0x10081,    /* 4 */
+};
+
+struct Partition_Quotas_attributes_page {
+	struct osd_attr_page_header hdr; /* id=P+2, size=0x1C */
+	__be64 default_maximum_user_object_length;
+	__be64 capacity_quota;
+	__be64 object_count;
+	__be64 collections_per_user_object;
+}  __packed;
+
+/* 7.1.2.14 User Object Quotas attributes page (OSD_APAGE_OBJECT_QUOTAS) */
+enum {
+	OSD_ATTR_OQ_MAXIMUM_LENGTH  = 0x1,        /* 8 */
+};
+
+struct Object_Quotas_attributes_page {
+	struct osd_attr_page_header hdr; /* id=U+2, size=0x8 */
+	__be64 maximum_length;
+}  __packed;
+
+/* 7.1.2.15 Root Timestamps attributes page (OSD_APAGE_ROOT_TIMESTAMP) */
+enum {
+	OSD_ATTR_RT_ATTRIBUTES_ACCESSED_TIME  = 0x2,        /* 6 */
+	OSD_ATTR_RT_ATTRIBUTES_MODIFIED_TIME  = 0x3,        /* 6 */
+	OSD_ATTR_RT_TIMESTAMP_BYPASS          = 0xFFFFFFFE, /* 1 */
+};
+
+struct root_timestamps_attributes_page {
+	struct osd_attr_page_header hdr; /* id=R+3, size=0xD */
+	struct osd_timestamp attributes_accessed_time;
+	struct osd_timestamp attributes_modified_time;
+	u8 timestamp_bypass;
+}  __packed;
+
+/* 7.1.2.16 Partition Timestamps attributes page
+ * (OSD_APAGE_PARTITION_TIMESTAMP)
+ */
+enum {
+	OSD_ATTR_PT_CREATED_TIME              = 0x1,        /* 6 */
+	OSD_ATTR_PT_ATTRIBUTES_ACCESSED_TIME  = 0x2,        /* 6 */
+	OSD_ATTR_PT_ATTRIBUTES_MODIFIED_TIME  = 0x3,        /* 6 */
+	OSD_ATTR_PT_DATA_ACCESSED_TIME        = 0x4,        /* 6 */
+	OSD_ATTR_PT_DATA_MODIFIED_TIME        = 0x5,        /* 6 */
+	OSD_ATTR_PT_TIMESTAMP_BYPASS          = 0xFFFFFFFE, /* 1 */
+};
+
+struct partition_timestamps_attributes_page {
+	struct osd_attr_page_header hdr; /* id=P+3, size=0x1F */
+	struct osd_timestamp created_time;
+	struct osd_timestamp attributes_accessed_time;
+	struct osd_timestamp attributes_modified_time;
+	struct osd_timestamp data_accessed_time;
+	struct osd_timestamp data_modified_time;
+	u8 timestamp_bypass;
+}  __packed;
+
+/* 7.1.2.17/18 Collection/Object Timestamps attributes page
+ * (OSD_APAGE_COLLECTION_TIMESTAMP/OSD_APAGE_OBJECT_TIMESTAMP)
+ */
+enum {
+	OSD_ATTR_OT_CREATED_TIME              = 0x1,        /* 6 */
+	OSD_ATTR_OT_ATTRIBUTES_ACCESSED_TIME  = 0x2,        /* 6 */
+	OSD_ATTR_OT_ATTRIBUTES_MODIFIED_TIME  = 0x3,        /* 6 */
+	OSD_ATTR_OT_DATA_ACCESSED_TIME        = 0x4,        /* 6 */
+	OSD_ATTR_OT_DATA_MODIFIED_TIME        = 0x5,        /* 6 */
+};
+
+/* same for collection */
+struct object_timestamps_attributes_page {
+	struct osd_attr_page_header hdr; /* id=C+3/3, size=0x1E */
+	struct osd_timestamp created_time;
+	struct osd_timestamp attributes_accessed_time;
+	struct osd_timestamp attributes_modified_time;
+	struct osd_timestamp data_accessed_time;
+	struct osd_timestamp data_modified_time;
+}  __packed;
+
+/* OSD2r05: 7.1.3.19 Attributes Access attributes page
+ * (OSD_APAGE_PARTITION_ATTR_ACCESS)
+ *
+ * each attribute is of the form below. Total array length is deduced
+ * from the attribute's length
+ * (See allowed_attributes_access of the struct osd_cap_object_descriptor)
+ */
+struct attributes_access_attr {
+	struct osd_attributes_list_attrid attr_list[0];
+} __packed;
+
+/* OSD2r05: 7.1.2.21 Collections attributes page */
+/* TBD */
+
+/* 7.1.2.20 Root Policy/Security attributes page (OSD_APAGE_ROOT_SECURITY) */
+enum {
+	OSD_ATTR_RS_DEFAULT_SECURITY_METHOD           = 0x1,       /* 1      */
+	OSD_ATTR_RS_OLDEST_VALID_NONCE_LIMIT          = 0x2,       /* 6      */
+	OSD_ATTR_RS_NEWEST_VALID_NONCE_LIMIT          = 0x3,       /* 6      */
+	OSD_ATTR_RS_PARTITION_DEFAULT_SECURITY_METHOD = 0x6,       /* 1      */
+	OSD_ATTR_RS_SUPPORTED_SECURITY_METHODS        = 0x7,       /* 2      */
+	OSD_ATTR_RS_ADJUSTABLE_CLOCK                  = 0x9,       /* 6      */
+	OSD_ATTR_RS_MASTER_KEY_IDENTIFIER             = 0x7FFD,    /* 0 or 7 */
+	OSD_ATTR_RS_ROOT_KEY_IDENTIFIER               = 0x7FFE,    /* 0 or 7 */
+	OSD_ATTR_RS_SUPPORTED_INTEGRITY_ALGORITHM_0   = 0x80000000,/* 1,(x16)*/
+	OSD_ATTR_RS_SUPPORTED_DH_GROUP_0              = 0x80000010,/* 1,(x16)*/
+};
+
+struct root_security_attributes_page {
+	struct osd_attr_page_header hdr; /* id=R+5, size=0x3F */
+	u8 default_security_method;
+	u8 partition_default_security_method;
+	__be16 supported_security_methods;
+	u8 mki_valid_rki_valid;
+	struct osd_timestamp oldest_valid_nonce_limit;
+	struct osd_timestamp newest_valid_nonce_limit;
+	struct osd_timestamp adjustable_clock;
+	u8 master_key_identifier[32-25];
+	u8 root_key_identifier[39-32];
+	u8 supported_integrity_algorithm[16];
+	u8 supported_dh_group[16];
+}  __packed;
+
+/* 7.1.2.21 Partition Policy/Security attributes page
+ * (OSD_APAGE_PARTITION_SECURITY)
+ */
+enum {
+	OSD_ATTR_PS_DEFAULT_SECURITY_METHOD        = 0x1,        /* 1      */
+	OSD_ATTR_PS_OLDEST_VALID_NONCE             = 0x2,        /* 6      */
+	OSD_ATTR_PS_NEWEST_VALID_NONCE             = 0x3,        /* 6      */
+	OSD_ATTR_PS_REQUEST_NONCE_LIST_DEPTH       = 0x4,        /* 2      */
+	OSD_ATTR_PS_FROZEN_WORKING_KEY_BIT_MASK    = 0x5,        /* 2      */
+	OSD_ATTR_PS_PARTITION_KEY_IDENTIFIER       = 0x7FFF,     /* 0 or 7 */
+	OSD_ATTR_PS_WORKING_KEY_IDENTIFIER_FIRST   = 0x8000,     /* 0 or 7 */
+	OSD_ATTR_PS_WORKING_KEY_IDENTIFIER_LAST    = 0x800F,     /* 0 or 7 */
+	OSD_ATTR_PS_POLICY_ACCESS_TAG              = 0x40000001, /* 4      */
+	OSD_ATTR_PS_USER_OBJECT_POLICY_ACCESS_TAG  = 0x40000002, /* 4      */
+};
+
+struct partition_security_attributes_page {
+	struct osd_attr_page_header hdr; /* id=p+5, size=0x8f */
+	u8 reserved[3];
+	u8 default_security_method;
+	struct osd_timestamp oldest_valid_nonce;
+	struct osd_timestamp newest_valid_nonce;
+	__be16 request_nonce_list_depth;
+	__be16 frozen_working_key_bit_mask;
+	__be32 policy_access_tag;
+	__be32 user_object_policy_access_tag;
+	u8 pki_valid;
+	__be16 wki_00_0f_vld;
+	struct osd_key_identifier partition_key_identifier;
+	struct osd_key_identifier working_key_identifiers[16];
+}  __packed;
+
+/* 7.1.2.22/23 Collection/Object Policy-Security attributes page
+ * (OSD_APAGE_COLLECTION_SECURITY/OSD_APAGE_OBJECT_SECURITY)
+ */
+enum {
+	OSD_ATTR_OS_POLICY_ACCESS_TAG              = 0x40000001, /* 4      */
+};
+
+struct object_security_attributes_page {
+	struct osd_attr_page_header hdr; /* id=C+5/5, size=4 */
+	__be32 policy_access_tag;
+}  __packed;
+
+/* OSD2r05: 7.1.3.31 Current Command attributes page
+ * (OSD_APAGE_CURRENT_COMMAND)
+ */
+enum {
+	OSD_ATTR_CC_RESPONSE_INTEGRITY_CHECK_VALUE     = 0x1, /* 32  */
+	OSD_ATTR_CC_OBJECT_TYPE                        = 0x2, /* 1   */
+	OSD_ATTR_CC_PARTITION_ID                       = 0x3, /* 8   */
+	OSD_ATTR_CC_OBJECT_ID                          = 0x4, /* 8   */
+	OSD_ATTR_CC_STARTING_BYTE_ADDRESS_OF_APPEND    = 0x5, /* 8   */
+	OSD_ATTR_CC_CHANGE_IN_USED_CAPACITY            = 0x6, /* 8   */
+};
+
+/*TBD: osdv1_current_command_attributes_page */
+
+struct osdv2_current_command_attributes_page {
+	struct osd_attr_page_header hdr;  /* id=0xFFFFFFFE, size=0x44 */
+	u8 response_integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
+	u8 object_type;
+	u8 reserved[3];
+	__be64 partition_id;
+	__be64 object_id;
+	__be64 starting_byte_address_of_append;
+	__be64 change_in_used_capacity;
+};
+
+#endif /*ndef __OSD_ATTRIBUTES_H__*/
diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h
new file mode 100644
index 000000000..86a569d00
--- /dev/null
+++ b/include/scsi/osd_initiator.h
@@ -0,0 +1,511 @@
+/*
+ * osd_initiator.h - OSD initiator API definition
+ *
+ * Copyright (C) 2008 Panasas Inc.  All rights reserved.
+ *
+ * Authors:
+ *   Boaz Harrosh <ooo@electrozaur.com>
+ *   Benny Halevy <bhalevy@panasas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ *
+ */
+#ifndef __OSD_INITIATOR_H__
+#define __OSD_INITIATOR_H__
+
+#include <scsi/osd_protocol.h>
+#include <scsi/osd_types.h>
+
+#include <linux/blkdev.h>
+#include <scsi/scsi_device.h>
+
+/* Note: "NI" in comments below means "Not Implemented yet" */
+
+/* Configure of code:
+ * #undef if you *don't* want OSD v1 support in runtime.
+ * If #defined the initiator will dynamically configure to encode OSD v1
+ * CDB's if the target is detected to be OSD v1 only.
+ * OSD v2 only commands, options, and attributes will be ignored if target
+ * is v1 only.
+ * If #defined will result in bigger/slower code (OK Slower maybe not)
+ * Q: Should this be CONFIG_SCSI_OSD_VER1_SUPPORT and set from Kconfig?
+ */
+#define OSD_VER1_SUPPORT y
+
+enum osd_std_version {
+	OSD_VER_NONE = 0,
+	OSD_VER1 = 1,
+	OSD_VER2 = 2,
+};
+
+/*
+ * Object-based Storage Device.
+ * This object represents an OSD device.
+ * It is not a full linux device in any way. It is only
+ * a place to hang resources associated with a Linux
+ * request Q and some default properties.
+ */
+struct osd_dev {
+	struct scsi_device *scsi_device;
+	unsigned def_timeout;
+
+#ifdef OSD_VER1_SUPPORT
+	enum osd_std_version version;
+#endif
+};
+
+/* Unique Identification of an OSD device */
+struct osd_dev_info {
+	unsigned systemid_len;
+	u8 systemid[OSD_SYSTEMID_LEN];
+	unsigned osdname_len;
+	u8 *osdname;
+};
+
+/* Retrieve/return osd_dev(s) for use by Kernel clients
+ * Use IS_ERR/ERR_PTR on returned "osd_dev *".
+ */
+struct osd_dev *osduld_path_lookup(const char *dev_name);
+struct osd_dev *osduld_info_lookup(const struct osd_dev_info *odi);
+void osduld_put_device(struct osd_dev *od);
+
+const struct osd_dev_info *osduld_device_info(struct osd_dev *od);
+bool osduld_device_same(struct osd_dev *od, const struct osd_dev_info *odi);
+
+/* Add/remove test ioctls from external modules */
+typedef int (do_test_fn)(struct osd_dev *od, unsigned cmd, unsigned long arg);
+int osduld_register_test(unsigned ioctl, do_test_fn *do_test);
+void osduld_unregister_test(unsigned ioctl);
+
+/* These are called by uld at probe time */
+void osd_dev_init(struct osd_dev *od, struct scsi_device *scsi_device);
+void osd_dev_fini(struct osd_dev *od);
+
+/**
+ * osd_auto_detect_ver - Detect the OSD version, return Unique Identification
+ *
+ * @od:     OSD target lun handle
+ * @caps:   Capabilities authorizing OSD root read attributes access
+ * @odi:    Retrieved information uniquely identifying the osd target lun
+ *          Note: odi->osdname must be kfreed by caller.
+ *
+ * Auto detects the OSD version of the OSD target and sets the @od
+ * accordingly. Meanwhile also returns the "system id" and "osd name" root
+ * attributes which uniquely identify the OSD target. This member is usually
+ * called by the ULD. ULD users should call osduld_device_info().
+ * This rutine allocates osd requests and memory at GFP_KERNEL level and might
+ * sleep.
+ */
+int osd_auto_detect_ver(struct osd_dev *od,
+	void *caps, struct osd_dev_info *odi);
+
+static inline struct request_queue *osd_request_queue(struct osd_dev *od)
+{
+	return od->scsi_device->request_queue;
+}
+
+/* we might want to use function vector in the future */
+static inline void osd_dev_set_ver(struct osd_dev *od, enum osd_std_version v)
+{
+#ifdef OSD_VER1_SUPPORT
+	od->version = v;
+#endif
+}
+
+static inline bool osd_dev_is_ver1(struct osd_dev *od)
+{
+#ifdef OSD_VER1_SUPPORT
+	return od->version == OSD_VER1;
+#else
+	return false;
+#endif
+}
+
+struct osd_request;
+typedef void (osd_req_done_fn)(struct osd_request *or, void *private);
+
+struct osd_request {
+	struct osd_cdb cdb;
+	struct osd_data_out_integrity_info out_data_integ;
+	struct osd_data_in_integrity_info in_data_integ;
+
+	struct osd_dev *osd_dev;
+	struct request *request;
+
+	struct _osd_req_data_segment {
+		void *buff;
+		unsigned alloc_size; /* 0 here means: don't call kfree */
+		unsigned total_bytes;
+	} cdb_cont, set_attr, enc_get_attr, get_attr;
+
+	struct _osd_io_info {
+		struct bio *bio;
+		u64 total_bytes;
+		u64 residual;
+		struct request *req;
+		struct _osd_req_data_segment *last_seg;
+		u8 *pad_buff;
+	} out, in;
+
+	unsigned timeout;
+	unsigned retries;
+	unsigned sense_len;
+	u8 sense[OSD_MAX_SENSE_LEN];
+	enum osd_attributes_mode attributes_mode;
+
+	osd_req_done_fn *async_done;
+	void *async_private;
+	blk_status_t async_error;
+	int req_errors;
+};
+
+static inline bool osd_req_is_ver1(struct osd_request *or)
+{
+	return osd_dev_is_ver1(or->osd_dev);
+}
+
+/*
+ * How to use the osd library:
+ *
+ * osd_start_request
+ *	Allocates a request.
+ *
+ * osd_req_*
+ *	Call one of, to encode the desired operation.
+ *
+ * osd_add_{get,set}_attr
+ *	Optionally add attributes to the CDB, list or page mode.
+ *
+ * osd_finalize_request
+ *	Computes final data out/in offsets and signs the request,
+ *	making it ready for execution.
+ *
+ * osd_execute_request
+ *	May be called to execute it through the block layer. Other wise submit
+ *	the associated block request in some other way.
+ *
+ * After execution:
+ * osd_req_decode_sense
+ *	Decodes sense information to verify execution results.
+ *
+ * osd_req_decode_get_attr
+ *	Retrieve osd_add_get_attr_list() values if used.
+ *
+ * osd_end_request
+ *	Must be called to deallocate the request.
+ */
+
+/**
+ * osd_start_request - Allocate and initialize an osd_request
+ *
+ * @osd_dev:    OSD device that holds the scsi-device and default values
+ *              that the request is associated with.
+ *
+ * Allocate osd_request and initialize all members to the
+ * default/initial state.
+ */
+struct osd_request *osd_start_request(struct osd_dev *od);
+
+enum osd_req_options {
+	OSD_REQ_FUA = 0x08,	/* Force Unit Access */
+	OSD_REQ_DPO = 0x10,	/* Disable Page Out */
+
+	OSD_REQ_BYPASS_TIMESTAMPS = 0x80,
+};
+
+/**
+ * osd_finalize_request - Sign request and prepare request for execution
+ *
+ * @or:		osd_request to prepare
+ * @options:	combination of osd_req_options bit flags or 0.
+ * @cap:	A Pointer to an OSD_CAP_LEN bytes buffer that is received from
+ *              The security manager as capabilities for this cdb.
+ * @cap_key:	The cryptographic key used to sign the cdb/data. Can be null
+ *              if NOSEC is used.
+ *
+ * The actual request and bios are only allocated here, so are the get_attr
+ * buffers that will receive the returned attributes. Copy's @cap to cdb.
+ * Sign the cdb/data with @cap_key.
+ */
+int osd_finalize_request(struct osd_request *or,
+	u8 options, const void *cap, const u8 *cap_key);
+
+/**
+ * osd_execute_request - Execute the request synchronously through block-layer
+ *
+ * @or:		osd_request to Executed
+ *
+ * Calls blk_execute_rq to q the command and waits for completion.
+ */
+int osd_execute_request(struct osd_request *or);
+
+/**
+ * osd_execute_request_async - Execute the request without waitting.
+ *
+ * @or:                      - osd_request to Executed
+ * @done: (Optional)         - Called at end of execution
+ * @private:                 - Will be passed to @done function
+ *
+ * Calls blk_execute_rq_nowait to queue the command. When execution is done
+ * optionally calls @done with @private as parameter. @or->async_error will
+ * have the return code
+ */
+int osd_execute_request_async(struct osd_request *or,
+	osd_req_done_fn *done, void *private);
+
+/**
+ * osd_req_decode_sense_full - Decode sense information after execution.
+ *
+ * @or:           - osd_request to examine
+ * @osi           - Receives a more detailed error report information (optional).
+ * @silent        - Do not print to dmsg (Even if enabled)
+ * @bad_obj_list  - Some commands act on multiple objects. Failed objects will
+ *                  be received here (optional)
+ * @max_obj       - Size of @bad_obj_list.
+ * @bad_attr_list - List of failing attributes (optional)
+ * @max_attr      - Size of @bad_attr_list.
+ *
+ * After execution, osd_request results are analyzed using this function. The
+ * return code is the final disposition on the error. So it is possible that a
+ * CHECK_CONDITION was returned from target but this will return NO_ERROR, for
+ * example on recovered errors. All parameters are optional if caller does
+ * not need any returned information.
+ * Note: This function will also dump the error to dmsg according to settings
+ * of the SCSI_OSD_DPRINT_SENSE Kconfig value. Set @silent if you know the
+ * command would routinely fail, to not spam the dmsg file.
+ */
+
+/**
+ * osd_err_priority - osd categorized return codes in ascending severity.
+ *
+ * The categories are borrowed from the pnfs_osd_errno enum.
+ * See comments for translated Linux codes returned by osd_req_decode_sense.
+ */
+enum osd_err_priority {
+	OSD_ERR_PRI_NO_ERROR	= 0,
+	/* Recoverable, caller should clear_highpage() all pages */
+	OSD_ERR_PRI_CLEAR_PAGES = 1, /* -EFAULT */
+	OSD_ERR_PRI_RESOURCE	= 2, /* -ENOMEM */
+	OSD_ERR_PRI_BAD_CRED	= 3, /* -EINVAL */
+	OSD_ERR_PRI_NO_ACCESS	= 4, /* -EACCES */
+	OSD_ERR_PRI_UNREACHABLE	= 5, /* any other */
+	OSD_ERR_PRI_NOT_FOUND	= 6, /* -ENOENT */
+	OSD_ERR_PRI_NO_SPACE	= 7, /* -ENOSPC */
+	OSD_ERR_PRI_EIO		= 8, /* -EIO    */
+};
+
+struct osd_sense_info {
+	enum osd_err_priority osd_err_pri;
+
+	int key;		/* one of enum scsi_sense_keys */
+	int additional_code ;	/* enum osd_additional_sense_codes */
+	union { /* Sense specific information */
+		u16 sense_info;
+		u16 cdb_field_offset; 	/* scsi_invalid_field_in_cdb */
+	};
+	union { /* Command specific information */
+		u64 command_info;
+	};
+
+	u32 not_initiated_command_functions; /* osd_command_functions_bits */
+	u32 completed_command_functions; /* osd_command_functions_bits */
+	struct osd_obj_id obj;
+	struct osd_attr attr;
+};
+
+int osd_req_decode_sense_full(struct osd_request *or,
+	struct osd_sense_info *osi, bool silent,
+	struct osd_obj_id *bad_obj_list, int max_obj,
+	struct osd_attr *bad_attr_list, int max_attr);
+
+static inline int osd_req_decode_sense(struct osd_request *or,
+	struct osd_sense_info *osi)
+{
+	return osd_req_decode_sense_full(or, osi, false, NULL, 0, NULL, 0);
+}
+
+/**
+ * osd_end_request - return osd_request to free store
+ *
+ * @or:		osd_request to free
+ *
+ * Deallocate all osd_request resources (struct req's, BIOs, buffers, etc.)
+ */
+void osd_end_request(struct osd_request *or);
+
+/*
+ * CDB Encoding
+ *
+ * Note: call only one of the following methods.
+ */
+
+/*
+ * Device commands
+ */
+void osd_req_set_master_seed_xchg(struct osd_request *or, ...);/* NI */
+void osd_req_set_master_key(struct osd_request *or, ...);/* NI */
+
+void osd_req_format(struct osd_request *or, u64 tot_capacity);
+
+/* list all partitions
+ * @list header must be initialized to zero on first run.
+ *
+ * Call osd_is_obj_list_done() to find if we got the complete list.
+ */
+int osd_req_list_dev_partitions(struct osd_request *or,
+	osd_id initial_id, struct osd_obj_id_list *list, unsigned nelem);
+
+void osd_req_flush_obsd(struct osd_request *or,
+	enum osd_options_flush_scope_values);
+
+void osd_req_perform_scsi_command(struct osd_request *or,
+	const u8 *cdb, ...);/* NI */
+void osd_req_task_management(struct osd_request *or, ...);/* NI */
+
+/*
+ * Partition commands
+ */
+void osd_req_create_partition(struct osd_request *or, osd_id partition);
+void osd_req_remove_partition(struct osd_request *or, osd_id partition);
+
+void osd_req_set_partition_key(struct osd_request *or,
+	osd_id partition, u8 new_key_id[OSD_CRYPTO_KEYID_SIZE],
+	u8 seed[OSD_CRYPTO_SEED_SIZE]);/* NI */
+
+/* list all collections in the partition
+ * @list header must be init to zero on first run.
+ *
+ * Call osd_is_obj_list_done() to find if we got the complete list.
+ */
+int osd_req_list_partition_collections(struct osd_request *or,
+	osd_id partition, osd_id initial_id, struct osd_obj_id_list *list,
+	unsigned nelem);
+
+/* list all objects in the partition
+ * @list header must be init to zero on first run.
+ *
+ * Call osd_is_obj_list_done() to find if we got the complete list.
+ */
+int osd_req_list_partition_objects(struct osd_request *or,
+	osd_id partition, osd_id initial_id, struct osd_obj_id_list *list,
+	unsigned nelem);
+
+void osd_req_flush_partition(struct osd_request *or,
+	osd_id partition, enum osd_options_flush_scope_values);
+
+/*
+ * Collection commands
+ */
+void osd_req_create_collection(struct osd_request *or,
+	const struct osd_obj_id *);/* NI */
+void osd_req_remove_collection(struct osd_request *or,
+	const struct osd_obj_id *);/* NI */
+
+/* list all objects in the collection */
+int osd_req_list_collection_objects(struct osd_request *or,
+	const struct osd_obj_id *, osd_id initial_id,
+	struct osd_obj_id_list *list, unsigned nelem);
+
+/* V2 only filtered list of objects in the collection */
+void osd_req_query(struct osd_request *or, ...);/* NI */
+
+void osd_req_flush_collection(struct osd_request *or,
+	const struct osd_obj_id *, enum osd_options_flush_scope_values);
+
+void osd_req_get_member_attrs(struct osd_request *or, ...);/* V2-only NI */
+void osd_req_set_member_attrs(struct osd_request *or, ...);/* V2-only NI */
+
+/*
+ * Object commands
+ */
+void osd_req_create_object(struct osd_request *or, struct osd_obj_id *);
+void osd_req_remove_object(struct osd_request *or, struct osd_obj_id *);
+
+void osd_req_write(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, struct bio *bio, u64 len);
+int osd_req_write_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
+void osd_req_append(struct osd_request *or,
+	const struct osd_obj_id *, struct bio *data_out);/* NI */
+void osd_req_create_write(struct osd_request *or,
+	const struct osd_obj_id *, struct bio *data_out, u64 offset);/* NI */
+void osd_req_clear(struct osd_request *or,
+	const struct osd_obj_id *, u64 offset, u64 len);/* NI */
+void osd_req_punch(struct osd_request *or,
+	const struct osd_obj_id *, u64 offset, u64 len);/* V2-only NI */
+
+void osd_req_flush_object(struct osd_request *or,
+	const struct osd_obj_id *, enum osd_options_flush_scope_values,
+	/*V2*/ u64 offset, /*V2*/ u64 len);
+
+void osd_req_read(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, struct bio *bio, u64 len);
+int osd_req_read_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
+
+/* Scatter/Gather write/read commands */
+int osd_req_write_sg(struct osd_request *or,
+	const struct osd_obj_id *obj, struct bio *bio,
+	const struct osd_sg_entry *sglist, unsigned numentries);
+int osd_req_read_sg(struct osd_request *or,
+	const struct osd_obj_id *obj, struct bio *bio,
+	const struct osd_sg_entry *sglist, unsigned numentries);
+int osd_req_write_sg_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, void **buff,
+	const struct osd_sg_entry *sglist, unsigned numentries);
+int osd_req_read_sg_kern(struct osd_request *or,
+	const struct osd_obj_id *obj, void **buff,
+	const struct osd_sg_entry *sglist, unsigned numentries);
+
+/*
+ * Root/Partition/Collection/Object Attributes commands
+ */
+
+/* get before set */
+void osd_req_get_attributes(struct osd_request *or, const struct osd_obj_id *);
+
+/* set before get */
+void osd_req_set_attributes(struct osd_request *or, const struct osd_obj_id *);
+
+/*
+ * Attributes appended to most commands
+ */
+
+/* Attributes List mode (or V2 CDB) */
+  /*
+   * TODO: In ver2 if at finalize time only one attr was set and no gets,
+   * then the Attributes CDB mode is used automatically to save IO.
+   */
+
+/* set a list of attributes. */
+int osd_req_add_set_attr_list(struct osd_request *or,
+	const struct osd_attr *, unsigned nelem);
+
+/* get a list of attributes */
+int osd_req_add_get_attr_list(struct osd_request *or,
+	const struct osd_attr *, unsigned nelem);
+
+/*
+ * Attributes list decoding
+ * Must be called after osd_request.request was executed
+ * It is called in a loop to decode the returned get_attr
+ * (see osd_add_get_attr)
+ */
+int osd_req_decode_get_attr_list(struct osd_request *or,
+	struct osd_attr *, int *nelem, void **iterator);
+
+/* Attributes Page mode */
+
+/*
+ * Read an attribute page and optionally set one attribute
+ *
+ * Retrieves the attribute page directly to a user buffer.
+ * @attr_page_data shall stay valid until end of execution.
+ * See osd_attributes.h for common page structures
+ */
+int osd_req_add_get_attr_page(struct osd_request *or,
+	u32 page_id, void *attr_page_data, unsigned max_page_len,
+	const struct osd_attr *set_one);
+
+#endif /* __OSD_LIB_H__ */
diff --git a/include/scsi/osd_ore.h b/include/scsi/osd_ore.h
new file mode 100644
index 000000000..7a8d2cd30
--- /dev/null
+++ b/include/scsi/osd_ore.h
@@ -0,0 +1,201 @@
+/*
+ * Copyright (C) 2011
+ * Boaz Harrosh <ooo@electrozaur.com>
+ *
+ * Public Declarations of the ORE API
+ *
+ * This file is part of the ORE (Object Raid Engine) library.
+ *
+ * ORE is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation. (GPL v2)
+ *
+ * ORE is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the ORE; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#ifndef __ORE_H__
+#define __ORE_H__
+
+#include <scsi/osd_initiator.h>
+#include <scsi/osd_attributes.h>
+#include <scsi/osd_sec.h>
+#include <linux/pnfs_osd_xdr.h>
+#include <linux/bug.h>
+
+struct ore_comp {
+	struct osd_obj_id	obj;
+	u8			cred[OSD_CAP_LEN];
+};
+
+struct ore_layout {
+	/* Our way of looking at the data_map */
+	enum pnfs_osd_raid_algorithm4
+		 raid_algorithm;
+	unsigned stripe_unit;
+	unsigned mirrors_p1;
+
+	unsigned group_width;
+	unsigned parity;
+	u64	 group_depth;
+	unsigned group_count;
+
+	/* Cached often needed calculations filled in by
+	 * ore_verify_layout
+	 */
+	unsigned long max_io_length;	/* Max length that should be passed to
+					 * ore_get_rw_state
+					 */
+};
+
+struct ore_dev {
+	struct osd_dev *od;
+};
+
+struct ore_components {
+	unsigned	first_dev;		/* First logical device no    */
+	unsigned	numdevs;		/* Num of devices in array    */
+	/* If @single_comp == EC_SINGLE_COMP, @comps points to a single
+	 * component. else there are @numdevs components
+	 */
+	enum EC_COMP_USAGE {
+		EC_SINGLE_COMP = 0, EC_MULTPLE_COMPS = 0xffffffff
+	}		single_comp;
+	struct ore_comp	*comps;
+
+	/* Array of pointers to ore_dev-* . User will usually have these pointed
+	 * too a bigger struct which contain an "ore_dev ored" member and use
+	 * container_of(oc->ods[i], struct foo_dev, ored) to access the bigger
+	 * structure.
+	 */
+	struct ore_dev	**ods;
+};
+
+/* ore_comp_dev Recievies a logical device index */
+static inline struct osd_dev *ore_comp_dev(
+	const struct ore_components *oc, unsigned i)
+{
+	BUG_ON((i < oc->first_dev) || (oc->first_dev + oc->numdevs <= i));
+	return oc->ods[i - oc->first_dev]->od;
+}
+
+static inline void ore_comp_set_dev(
+	struct ore_components *oc, unsigned i, struct osd_dev *od)
+{
+	oc->ods[i - oc->first_dev]->od = od;
+}
+
+struct ore_striping_info {
+	u64 offset;
+	u64 obj_offset;
+	u64 length;
+	u64 first_stripe_start; /* only used in raid writes */
+	u64 M; /* for truncate */
+	unsigned bytes_in_stripe;
+	unsigned dev;
+	unsigned par_dev;
+	unsigned unit_off;
+	unsigned cur_pg;
+	unsigned cur_comp;
+	unsigned maxdevUnits;
+};
+
+struct ore_io_state;
+typedef void (*ore_io_done_fn)(struct ore_io_state *ios, void *private);
+struct _ore_r4w_op {
+	/* @Priv given here is passed ios->private */
+	struct page * (*get_page)(void *priv, u64 page_index, bool *uptodate);
+	void (*put_page)(void *priv, struct page *page);
+};
+
+struct ore_io_state {
+	struct kref		kref;
+	struct ore_striping_info si;
+
+	void			*private;
+	ore_io_done_fn	done;
+
+	struct ore_layout	*layout;
+	struct ore_components	*oc;
+
+	/* Global read/write IO*/
+	loff_t			offset;
+	unsigned long		length;
+	void			*kern_buff;
+
+	struct page		**pages;
+	unsigned		nr_pages;
+	unsigned		pgbase;
+	unsigned		pages_consumed;
+
+	/* Attributes */
+	unsigned		in_attr_len;
+	struct osd_attr		*in_attr;
+	unsigned		out_attr_len;
+	struct osd_attr		*out_attr;
+
+	bool			reading;
+
+	/* House keeping of Parity pages */
+	bool			extra_part_alloc;
+	struct page		**parity_pages;
+	unsigned		max_par_pages;
+	unsigned		cur_par_page;
+	unsigned		sgs_per_dev;
+	struct __stripe_pages_2d *sp2d;
+	struct ore_io_state	 *ios_read_4_write;
+	const struct _ore_r4w_op *r4w;
+
+	/* Variable array of size numdevs */
+	unsigned numdevs;
+	struct ore_per_dev_state {
+		struct osd_request *or;
+		struct bio *bio;
+		loff_t offset;
+		unsigned length;
+		unsigned last_sgs_total;
+		unsigned dev;
+		struct osd_sg_entry *sglist;
+		unsigned cur_sg;
+	} per_dev[];
+};
+
+static inline unsigned ore_io_state_size(unsigned numdevs)
+{
+	return sizeof(struct ore_io_state) +
+		sizeof(struct ore_per_dev_state) * numdevs;
+}
+
+/* ore.c */
+int ore_verify_layout(unsigned total_comps, struct ore_layout *layout);
+void ore_calc_stripe_info(struct ore_layout *layout, u64 file_offset,
+			  u64 length, struct ore_striping_info *si);
+int ore_get_rw_state(struct ore_layout *layout, struct ore_components *comps,
+		     bool is_reading, u64 offset, u64 length,
+		     struct ore_io_state **ios);
+int ore_get_io_state(struct ore_layout *layout, struct ore_components *comps,
+		     struct ore_io_state **ios);
+void ore_put_io_state(struct ore_io_state *ios);
+
+typedef void (*ore_on_dev_error)(struct ore_io_state *ios, struct ore_dev *od,
+	unsigned dev_index, enum osd_err_priority oep,
+	u64 dev_offset, u64  dev_len);
+int ore_check_io(struct ore_io_state *ios, ore_on_dev_error rep);
+
+int ore_create(struct ore_io_state *ios);
+int ore_remove(struct ore_io_state *ios);
+int ore_write(struct ore_io_state *ios);
+int ore_read(struct ore_io_state *ios);
+int ore_truncate(struct ore_layout *layout, struct ore_components *comps,
+		 u64 size);
+
+int extract_attr_from_ios(struct ore_io_state *ios, struct osd_attr *attr);
+
+extern const struct osd_attr g_attr_logical_length;
+
+#endif
diff --git a/include/scsi/osd_protocol.h b/include/scsi/osd_protocol.h
new file mode 100644
index 000000000..e0ca835e7
--- /dev/null
+++ b/include/scsi/osd_protocol.h
@@ -0,0 +1,676 @@
+/*
+ * osd_protocol.h - OSD T10 standard C definitions.
+ *
+ * Copyright (C) 2008 Panasas Inc.  All rights reserved.
+ *
+ * Authors:
+ *   Boaz Harrosh <ooo@electrozaur.com>
+ *   Benny Halevy <bhalevy@panasas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ *
+ * This file contains types and constants that are defined by the protocol
+ * Note: All names and symbols are taken from the OSD standard's text.
+ */
+#ifndef __OSD_PROTOCOL_H__
+#define __OSD_PROTOCOL_H__
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <asm/unaligned.h>
+#include <scsi/scsi.h>
+
+enum {
+	OSDv1_ADDITIONAL_CDB_LENGTH = 192,
+	OSDv1_TOTAL_CDB_LEN = OSDv1_ADDITIONAL_CDB_LENGTH + 8,
+	OSDv1_CAP_LEN = 80,
+
+	/* Latest supported version */
+	OSDv2_ADDITIONAL_CDB_LENGTH = 228,
+	OSD_ADDITIONAL_CDB_LENGTH =
+		OSDv2_ADDITIONAL_CDB_LENGTH,
+	OSD_TOTAL_CDB_LEN = OSD_ADDITIONAL_CDB_LENGTH + 8,
+	OSD_CAP_LEN = 104,
+
+	OSD_SYSTEMID_LEN = 20,
+	OSDv1_CRYPTO_KEYID_SIZE = 20,
+	OSDv2_CRYPTO_KEYID_SIZE = 32,
+	OSD_CRYPTO_KEYID_SIZE = OSDv2_CRYPTO_KEYID_SIZE,
+	OSD_CRYPTO_SEED_SIZE = 4,
+	OSD_CRYPTO_NONCE_SIZE = 12,
+	OSD_MAX_SENSE_LEN = 252, /* from SPC-3 */
+
+	OSD_PARTITION_FIRST_ID = 0x10000,
+	OSD_OBJECT_FIRST_ID = 0x10000,
+};
+
+/* (osd-r10 5.2.4)
+ * osd2r03: 5.2.3 Caching control bits
+ */
+enum osd_options_byte {
+	OSD_CDB_FUA = 0x08,	/* Force Unit Access */
+	OSD_CDB_DPO = 0x10,	/* Disable Page Out */
+};
+
+/*
+ * osd2r03: 5.2.5 Isolation.
+ * First 3 bits, V2-only.
+ * Also for attr 110h "default isolation method" at Root Information page
+ */
+enum osd_options_byte_isolation {
+	OSD_ISOLATION_DEFAULT = 0,
+	OSD_ISOLATION_NONE = 1,
+	OSD_ISOLATION_STRICT = 2,
+	OSD_ISOLATION_RANGE = 4,
+	OSD_ISOLATION_FUNCTIONAL = 5,
+	OSD_ISOLATION_VENDOR = 7,
+};
+
+/* (osd-r10: 6.7)
+ * osd2r03: 6.8 FLUSH, FLUSH COLLECTION, FLUSH OSD, FLUSH PARTITION
+ */
+enum osd_options_flush_scope_values {
+	OSD_CDB_FLUSH_ALL = 0,
+	OSD_CDB_FLUSH_ATTR_ONLY = 1,
+
+	OSD_CDB_FLUSH_ALL_RECURSIVE = 2,
+	/* V2-only */
+	OSD_CDB_FLUSH_ALL_RANGE = 2,
+};
+
+/* osd2r03: 5.2.10 Timestamps control */
+enum {
+	OSD_CDB_NORMAL_TIMESTAMPS = 0,
+	OSD_CDB_BYPASS_TIMESTAMPS = 0x7f,
+};
+
+/* (osd-r10: 5.2.2.1)
+ * osd2r03: 5.2.4.1 Get and set attributes CDB format selection
+ *	2 bits at second nibble of command_specific_options byte
+ */
+enum osd_attributes_mode {
+	/* V2-only */
+	OSD_CDB_SET_ONE_ATTR = 0x10,
+
+	OSD_CDB_GET_ATTR_PAGE_SET_ONE = 0x20,
+	OSD_CDB_GET_SET_ATTR_LISTS = 0x30,
+
+	OSD_CDB_GET_SET_ATTR_MASK = 0x30,
+};
+
+/* (osd-r10: 4.12.5)
+ * osd2r03: 4.14.5 Data-In and Data-Out buffer offsets
+ *	byte offset = mantissa * (2^(exponent+8))
+ *	struct {
+ *		unsigned mantissa: 28;
+ *		int exponent: 04;
+ *	}
+ */
+typedef __be32 osd_cdb_offset;
+
+enum {
+	OSD_OFFSET_UNUSED = 0xFFFFFFFF,
+	OSD_OFFSET_MAX_BITS = 28,
+
+	OSDv1_OFFSET_MIN_SHIFT = 8,
+	OSD_OFFSET_MIN_SHIFT = 3,
+	OSD_OFFSET_MAX_SHIFT = 16,
+};
+
+/* Return the smallest allowed encoded offset that contains @offset.
+ *
+ * The actual encoded offset returned is @offset + *padding.
+ * (up to max_shift, non-inclusive)
+ */
+osd_cdb_offset __osd_encode_offset(u64 offset, unsigned *padding,
+	int min_shift, int max_shift);
+
+/* Minimum alignment is 256 bytes
+ * Note: Seems from std v1 that exponent can be from 0+8 to 0xE+8 (inclusive)
+ * which is 8 to 23 but IBM code restricts it to 16, so be it.
+ */
+static inline osd_cdb_offset osd_encode_offset_v1(u64 offset, unsigned *padding)
+{
+	return __osd_encode_offset(offset, padding,
+				OSDv1_OFFSET_MIN_SHIFT, OSD_OFFSET_MAX_SHIFT);
+}
+
+/* Minimum 8 bytes alignment
+ * Same as v1 but since exponent can be signed than a less than
+ * 256 alignment can be reached with small offsets (<2GB)
+ */
+static inline osd_cdb_offset osd_encode_offset_v2(u64 offset, unsigned *padding)
+{
+	return __osd_encode_offset(offset, padding,
+				   OSD_OFFSET_MIN_SHIFT, OSD_OFFSET_MAX_SHIFT);
+}
+
+/* osd2r03: 5.2.1 Overview */
+struct osd_cdb_head {
+	struct scsi_varlen_cdb_hdr varlen_cdb;
+/*10*/	u8		options;
+	u8		command_specific_options;
+	u8		timestamp_control;
+/*13*/	u8		reserved1[3];
+/*16*/	__be64		partition;
+/*24*/	__be64		object;
+/*32*/	union { /* V1 vs V2 alignment differences */
+		struct __osdv1_cdb_addr_len {
+/*32*/			__be32 		list_identifier;/* Rarely used */
+/*36*/			__be64		length;
+/*44*/			__be64		start_address;
+		} __packed v1;
+
+		struct __osdv2_cdb_addr_len {
+			/* called allocation_length in some commands */
+/*32*/			__be64	length;
+/*40*/			__be64	start_address;
+			union {
+/*48*/				__be32 list_identifier;/* Rarely used */
+				/* OSD2r05 5.2.5 CDB continuation length */
+/*48*/				__be32 cdb_continuation_length;
+			};
+		} __packed v2;
+	};
+/*52*/	union { /* selected attributes mode Page/List/Single */
+		struct osd_attributes_page_mode {
+/*52*/			__be32		get_attr_page;
+/*56*/			__be32		get_attr_alloc_length;
+/*60*/			osd_cdb_offset	get_attr_offset;
+
+/*64*/			__be32		set_attr_page;
+/*68*/			__be32		set_attr_id;
+/*72*/			__be32		set_attr_length;
+/*76*/			osd_cdb_offset	set_attr_offset;
+/*80*/		} __packed attrs_page;
+
+		struct osd_attributes_list_mode {
+/*52*/			__be32		get_attr_desc_bytes;
+/*56*/			osd_cdb_offset	get_attr_desc_offset;
+
+/*60*/			__be32		get_attr_alloc_length;
+/*64*/			osd_cdb_offset	get_attr_offset;
+
+/*68*/			__be32		set_attr_bytes;
+/*72*/			osd_cdb_offset	set_attr_offset;
+			__be32 not_used;
+/*80*/		} __packed attrs_list;
+
+		/* osd2r03:5.2.4.2 Set one attribute value using CDB fields */
+		struct osd_attributes_cdb_mode {
+/*52*/			__be32		set_attr_page;
+/*56*/			__be32		set_attr_id;
+/*60*/			__be16		set_attr_len;
+/*62*/			u8		set_attr_val[18];
+/*80*/		} __packed attrs_cdb;
+/*52*/		u8 get_set_attributes_parameters[28];
+	};
+} __packed;
+/*80*/
+
+/*160 v1*/
+struct osdv1_security_parameters {
+/*160*/u8	integrity_check_value[OSDv1_CRYPTO_KEYID_SIZE];
+/*180*/u8	request_nonce[OSD_CRYPTO_NONCE_SIZE];
+/*192*/osd_cdb_offset	data_in_integrity_check_offset;
+/*196*/osd_cdb_offset	data_out_integrity_check_offset;
+} __packed;
+/*200 v1*/
+
+/*184 v2*/
+struct osdv2_security_parameters {
+/*184*/u8	integrity_check_value[OSDv2_CRYPTO_KEYID_SIZE];
+/*216*/u8	request_nonce[OSD_CRYPTO_NONCE_SIZE];
+/*228*/osd_cdb_offset	data_in_integrity_check_offset;
+/*232*/osd_cdb_offset	data_out_integrity_check_offset;
+} __packed;
+/*236 v2*/
+
+struct osd_security_parameters {
+	union {
+		struct osdv1_security_parameters v1;
+		struct osdv2_security_parameters v2;
+	};
+};
+
+struct osdv1_cdb {
+	struct osd_cdb_head h;
+	u8 caps[OSDv1_CAP_LEN];
+	struct osdv1_security_parameters sec_params;
+} __packed;
+
+struct osdv2_cdb {
+	struct osd_cdb_head h;
+	u8 caps[OSD_CAP_LEN];
+	struct osdv2_security_parameters sec_params;
+} __packed;
+
+struct osd_cdb {
+	union {
+		struct osdv1_cdb v1;
+		struct osdv2_cdb v2;
+		u8 buff[OSD_TOTAL_CDB_LEN];
+	};
+} __packed;
+
+static inline struct osd_cdb_head *osd_cdb_head(struct osd_cdb *ocdb)
+{
+	return (struct osd_cdb_head *)ocdb->buff;
+}
+
+/* define both version actions
+ * Ex name = FORMAT_OSD we have OSD_ACT_FORMAT_OSD && OSDv1_ACT_FORMAT_OSD
+ */
+#define OSD_ACT___(Name, Num) \
+	OSD_ACT_##Name = cpu_to_be16(0x8880 + Num), \
+	OSDv1_ACT_##Name = cpu_to_be16(0x8800 + Num),
+
+/* V2 only actions */
+#define OSD_ACT_V2(Name, Num) \
+	OSD_ACT_##Name = cpu_to_be16(0x8880 + Num),
+
+#define OSD_ACT_V1_V2(Name, Num1, Num2) \
+	OSD_ACT_##Name = cpu_to_be16(Num2), \
+	OSDv1_ACT_##Name = cpu_to_be16(Num1),
+
+enum osd_service_actions {
+	OSD_ACT_V2(OBJECT_STRUCTURE_CHECK,	0x00)
+	OSD_ACT___(FORMAT_OSD,			0x01)
+	OSD_ACT___(CREATE,			0x02)
+	OSD_ACT___(LIST,			0x03)
+	OSD_ACT_V2(PUNCH,			0x04)
+	OSD_ACT___(READ,			0x05)
+	OSD_ACT___(WRITE,			0x06)
+	OSD_ACT___(APPEND,			0x07)
+	OSD_ACT___(FLUSH,			0x08)
+	OSD_ACT_V2(CLEAR,			0x09)
+	OSD_ACT___(REMOVE,			0x0A)
+	OSD_ACT___(CREATE_PARTITION,		0x0B)
+	OSD_ACT___(REMOVE_PARTITION,		0x0C)
+	OSD_ACT___(GET_ATTRIBUTES,		0x0E)
+	OSD_ACT___(SET_ATTRIBUTES,		0x0F)
+	OSD_ACT___(CREATE_AND_WRITE,		0x12)
+	OSD_ACT___(CREATE_COLLECTION,		0x15)
+	OSD_ACT___(REMOVE_COLLECTION,		0x16)
+	OSD_ACT___(LIST_COLLECTION,		0x17)
+	OSD_ACT___(SET_KEY,			0x18)
+	OSD_ACT___(SET_MASTER_KEY,		0x19)
+	OSD_ACT___(FLUSH_COLLECTION,		0x1A)
+	OSD_ACT___(FLUSH_PARTITION,		0x1B)
+	OSD_ACT___(FLUSH_OSD,			0x1C)
+
+	OSD_ACT_V2(QUERY,			0x20)
+	OSD_ACT_V2(REMOVE_MEMBER_OBJECTS,	0x21)
+	OSD_ACT_V2(GET_MEMBER_ATTRIBUTES,	0x22)
+	OSD_ACT_V2(SET_MEMBER_ATTRIBUTES,	0x23)
+
+	OSD_ACT_V2(CREATE_CLONE,		0x28)
+	OSD_ACT_V2(CREATE_SNAPSHOT,		0x29)
+	OSD_ACT_V2(DETACH_CLONE,		0x2A)
+	OSD_ACT_V2(REFRESH_SNAPSHOT_CLONE,	0x2B)
+	OSD_ACT_V2(RESTORE_PARTITION_FROM_SNAPSHOT, 0x2C)
+
+	OSD_ACT_V2(READ_MAP,			0x31)
+	OSD_ACT_V2(READ_MAPS_COMPARE,		0x32)
+
+	OSD_ACT_V1_V2(PERFORM_SCSI_COMMAND,	0x8F7E, 0x8F7C)
+	OSD_ACT_V1_V2(SCSI_TASK_MANAGEMENT,	0x8F7F, 0x8F7D)
+	/* 0x8F80 to 0x8FFF are Vendor specific */
+};
+
+/* osd2r03: 7.1.3.2 List entry format for retrieving attributes */
+struct osd_attributes_list_attrid {
+	__be32 attr_page;
+	__be32 attr_id;
+} __packed;
+
+/*
+ * NOTE: v1: is not aligned.
+ */
+struct osdv1_attributes_list_element {
+	__be32 attr_page;
+	__be32 attr_id;
+	__be16 attr_bytes; /* valid bytes at attr_val without padding */
+	u8 attr_val[0];
+} __packed;
+
+/*
+ * osd2r03: 7.1.3.3 List entry format for retrieved attributes and
+ *                  for setting attributes
+ * NOTE: v2 is 8-bytes aligned
+ */
+struct osdv2_attributes_list_element {
+	__be32 attr_page;
+	__be32 attr_id;
+	u8 reserved[6];
+	__be16 attr_bytes; /* valid bytes at attr_val without padding */
+	u8 attr_val[0];
+} __packed;
+
+enum {
+	OSDv1_ATTRIBUTES_ELEM_ALIGN = 1,
+	OSD_ATTRIBUTES_ELEM_ALIGN = 8,
+};
+
+enum {
+	OSD_ATTR_LIST_ALL_PAGES = 0xFFFFFFFF,
+	OSD_ATTR_LIST_ALL_IN_PAGE = 0xFFFFFFFF,
+};
+
+static inline unsigned osdv1_attr_list_elem_size(unsigned len)
+{
+	return ALIGN(len + sizeof(struct osdv1_attributes_list_element),
+		     OSDv1_ATTRIBUTES_ELEM_ALIGN);
+}
+
+static inline unsigned osdv2_attr_list_elem_size(unsigned len)
+{
+	return ALIGN(len + sizeof(struct osdv2_attributes_list_element),
+		     OSD_ATTRIBUTES_ELEM_ALIGN);
+}
+
+/*
+ * osd2r03: 7.1.3 OSD attributes lists (Table 184) — List type values
+ */
+enum osd_attr_list_types {
+	OSD_ATTR_LIST_GET = 0x1, 	/* descriptors only */
+	OSD_ATTR_LIST_SET_RETRIEVE = 0x9, /*descriptors/values variable-length*/
+	OSD_V2_ATTR_LIST_MULTIPLE = 0xE,  /* ver2, Multiple Objects lists*/
+	OSD_V1_ATTR_LIST_CREATE_MULTIPLE = 0xF,/*ver1, used by create_multple*/
+};
+
+/* osd2r03: 7.1.3.4 Multi-object retrieved attributes format */
+struct osd_attributes_list_multi_header {
+	__be64 object_id;
+	u8 object_type; /* object_type enum below */
+	u8 reserved[5];
+	__be16 list_bytes;
+	/* followed by struct osd_attributes_list_element's */
+};
+
+struct osdv1_attributes_list_header {
+	u8 type;	/* low 4-bit only */
+	u8 pad;
+	__be16 list_bytes; /* Initiator shall set to Zero. Only set by target */
+	/*
+	 * type=9 followed by struct osd_attributes_list_element's
+	 * type=E followed by struct osd_attributes_list_multi_header's
+	 */
+} __packed;
+
+static inline unsigned osdv1_list_size(struct osdv1_attributes_list_header *h)
+{
+	return be16_to_cpu(h->list_bytes);
+}
+
+struct osdv2_attributes_list_header {
+	u8 type;	/* lower 4-bits only */
+	u8 pad[3];
+/*4*/	__be32 list_bytes; /* Initiator shall set to zero. Only set by target */
+	/*
+	 * type=9 followed by struct osd_attributes_list_element's
+	 * type=E followed by struct osd_attributes_list_multi_header's
+	 */
+} __packed;
+
+static inline unsigned osdv2_list_size(struct osdv2_attributes_list_header *h)
+{
+	return be32_to_cpu(h->list_bytes);
+}
+
+/* (osd-r10 6.13)
+ * osd2r03: 6.15 LIST (Table 79) LIST command parameter data.
+ *	for root_lstchg below
+ */
+enum {
+	OSD_OBJ_ID_LIST_PAR = 0x1, /* V1-only. Not used in V2 */
+	OSD_OBJ_ID_LIST_LSTCHG = 0x2,
+};
+
+/*
+ * osd2r03: 6.15.2 LIST command parameter data
+ * (Also for LIST COLLECTION)
+ */
+struct osd_obj_id_list {
+	__be64 list_bytes; /* bytes in list excluding list_bytes (-8) */
+	__be64 continuation_id;
+	__be32 list_identifier;
+	u8 pad[3];
+	u8 root_lstchg;
+	__be64 object_ids[0];
+} __packed;
+
+static inline bool osd_is_obj_list_done(struct osd_obj_id_list *list,
+	bool *is_changed)
+{
+	*is_changed = (0 != (list->root_lstchg & OSD_OBJ_ID_LIST_LSTCHG));
+	return 0 != list->continuation_id;
+}
+
+/*
+ * osd2r03: 4.12.4.5 The ALLDATA security method
+ */
+struct osd_data_out_integrity_info {
+	__be64 data_bytes;
+	__be64 set_attributes_bytes;
+	__be64 get_attributes_bytes;
+	__u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
+} __packed;
+
+/* Same osd_data_out_integrity_info is used for OSD2/OSD1. The only difference
+ * Is the sizeof the structure since in OSD1 the last array is smaller. Use
+ * below for version independent handling of this structure
+ */
+static inline int osd_data_out_integrity_info_sizeof(bool is_ver1)
+{
+	return sizeof(struct osd_data_out_integrity_info) -
+		(is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE));
+}
+
+struct osd_data_in_integrity_info {
+	__be64 data_bytes;
+	__be64 retrieved_attributes_bytes;
+	__u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
+} __packed;
+
+/* Same osd_data_in_integrity_info is used for OSD2/OSD1. The only difference
+ * Is the sizeof the structure since in OSD1 the last array is smaller. Use
+ * below for version independent handling of this structure
+ */
+static inline int osd_data_in_integrity_info_sizeof(bool is_ver1)
+{
+	return sizeof(struct osd_data_in_integrity_info) -
+		(is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE));
+}
+
+struct osd_timestamp {
+	u8 time[6]; /* number of milliseconds since 1/1/1970 UT (big endian) */
+} __packed;
+/* FIXME: define helper functions to convert to/from osd time format */
+
+/*
+ * Capability & Security definitions
+ * osd2r03: 4.11.2.2 Capability format
+ * osd2r03: 5.2.8 Security parameters
+ */
+
+struct osd_key_identifier {
+	u8 id[7]; /* if you know why 7 please email ooo@electrozaur.com */
+} __packed;
+
+/* for osd_capability.format */
+enum {
+	OSD_SEC_CAP_FORMAT_NO_CAPS = 0,
+	OSD_SEC_CAP_FORMAT_VER1 = 1,
+	OSD_SEC_CAP_FORMAT_VER2 = 2,
+};
+
+/* security_method */
+enum {
+	OSD_SEC_NOSEC = 0,
+	OSD_SEC_CAPKEY = 1,
+	OSD_SEC_CMDRSP = 2,
+	OSD_SEC_ALLDATA = 3,
+};
+
+enum object_type {
+	OSD_SEC_OBJ_ROOT = 0x1,
+	OSD_SEC_OBJ_PARTITION = 0x2,
+	OSD_SEC_OBJ_COLLECTION = 0x40,
+	OSD_SEC_OBJ_USER = 0x80,
+};
+
+enum osd_capability_bit_masks {
+	OSD_SEC_CAP_APPEND	= BIT(0),
+	OSD_SEC_CAP_OBJ_MGMT	= BIT(1),
+	OSD_SEC_CAP_REMOVE	= BIT(2),
+	OSD_SEC_CAP_CREATE	= BIT(3),
+	OSD_SEC_CAP_SET_ATTR	= BIT(4),
+	OSD_SEC_CAP_GET_ATTR	= BIT(5),
+	OSD_SEC_CAP_WRITE	= BIT(6),
+	OSD_SEC_CAP_READ	= BIT(7),
+
+	OSD_SEC_CAP_NONE1	= BIT(8),
+	OSD_SEC_CAP_NONE2	= BIT(9),
+	OSD_SEC_GBL_REM 	= BIT(10), /*v2 only*/
+	OSD_SEC_CAP_QUERY	= BIT(11), /*v2 only*/
+	OSD_SEC_CAP_M_OBJECT	= BIT(12), /*v2 only*/
+	OSD_SEC_CAP_POL_SEC	= BIT(13),
+	OSD_SEC_CAP_GLOBAL	= BIT(14),
+	OSD_SEC_CAP_DEV_MGMT	= BIT(15),
+};
+
+/* for object_descriptor_type (hi nibble used) */
+enum {
+	OSD_SEC_OBJ_DESC_NONE = 0,     /* Not allowed */
+	OSD_SEC_OBJ_DESC_OBJ = 1 << 4, /* v1: also collection */
+	OSD_SEC_OBJ_DESC_PAR = 2 << 4, /* also root */
+	OSD_SEC_OBJ_DESC_COL = 3 << 4, /* v2 only */
+};
+
+/* (osd-r10:4.9.2.2)
+ * osd2r03:4.11.2.2 Capability format
+ */
+struct osd_capability_head {
+	u8 format; /* low nibble */
+	u8 integrity_algorithm__key_version; /* MAKE_BYTE(integ_alg, key_ver) */
+	u8 security_method;
+	u8 reserved1;
+/*04*/	struct osd_timestamp expiration_time;
+/*10*/	u8 audit[20];
+/*30*/	u8 discriminator[12];
+/*42*/	struct osd_timestamp object_created_time;
+/*48*/	u8 object_type;
+/*49*/	u8 permissions_bit_mask[5];
+/*54*/	u8 reserved2;
+/*55*/	u8 object_descriptor_type; /* high nibble */
+} __packed;
+
+/*56 v1*/
+struct osdv1_cap_object_descriptor {
+	union {
+		struct {
+/*56*/			__be32 policy_access_tag;
+/*60*/			__be64 allowed_partition_id;
+/*68*/			__be64 allowed_object_id;
+/*76*/			__be32 reserved;
+		} __packed obj_desc;
+
+/*56*/		u8 object_descriptor[24];
+	};
+} __packed;
+/*80 v1*/
+
+/*56 v2*/
+struct osd_cap_object_descriptor {
+	union {
+		struct {
+/*56*/			__be32 allowed_attributes_access;
+/*60*/			__be32 policy_access_tag;
+/*64*/			__be16 boot_epoch;
+/*66*/			u8 reserved[6];
+/*72*/			__be64 allowed_partition_id;
+/*80*/			__be64 allowed_object_id;
+/*88*/			__be64 allowed_range_length;
+/*96*/			__be64 allowed_range_start;
+		} __packed obj_desc;
+
+/*56*/		u8 object_descriptor[48];
+	};
+} __packed;
+/*104 v2*/
+
+struct osdv1_capability {
+	struct osd_capability_head h;
+	struct osdv1_cap_object_descriptor od;
+} __packed;
+
+struct osd_capability {
+	struct osd_capability_head h;
+	struct osd_cap_object_descriptor od;
+} __packed;
+
+/**
+ * osd_sec_set_caps - set cap-bits into the capabilities header
+ *
+ * @cap:	The osd_capability_head to set cap bits to.
+ * @bit_mask: 	Use an ORed list of enum osd_capability_bit_masks values
+ *
+ * permissions_bit_mask is unaligned use below to set into caps
+ * in a version independent way
+ */
+static inline void osd_sec_set_caps(struct osd_capability_head *cap,
+	u16 bit_mask)
+{
+	/*
+	 *Note: The bits above are defined LE order this is because this way
+	 *      they can grow in the future to more then 16, and still retain
+	 *      there constant values.
+	 */
+	put_unaligned_le16(bit_mask, &cap->permissions_bit_mask);
+}
+
+/* osd2r05a sec 5.3: CDB continuation segment formats */
+enum osd_continuation_segment_format {
+	CDB_CONTINUATION_FORMAT_V2 = 0x01,
+};
+
+struct osd_continuation_segment_header {
+	u8	format;
+	u8	reserved1;
+	__be16	service_action;
+	__be32	reserved2;
+	u8	integrity_check[OSDv2_CRYPTO_KEYID_SIZE];
+} __packed;
+
+/* osd2r05a sec 5.4.1: CDB continuation descriptors */
+enum osd_continuation_descriptor_type {
+	NO_MORE_DESCRIPTORS = 0x0000,
+	SCATTER_GATHER_LIST = 0x0001,
+	QUERY_LIST = 0x0002,
+	USER_OBJECT = 0x0003,
+	COPY_USER_OBJECT_SOURCE = 0x0101,
+	EXTENSION_CAPABILITIES = 0xFFEE
+};
+
+struct osd_continuation_descriptor_header {
+	__be16	type;
+	u8	reserved;
+	u8	pad_length;
+	__be32	length;
+} __packed;
+
+
+/* osd2r05a sec 5.4.2: Scatter/gather list */
+struct osd_sg_list_entry {
+	__be64 offset;
+	__be64 len;
+};
+
+struct osd_sg_continuation_descriptor {
+	struct osd_continuation_descriptor_header hdr;
+	struct osd_sg_list_entry entries[];
+};
+
+#endif /* ndef __OSD_PROTOCOL_H__ */
diff --git a/include/scsi/osd_sec.h b/include/scsi/osd_sec.h
new file mode 100644
index 000000000..7abeb0f0d
--- /dev/null
+++ b/include/scsi/osd_sec.h
@@ -0,0 +1,45 @@
+/*
+ * osd_sec.h - OSD security manager API
+ *
+ * Copyright (C) 2008 Panasas Inc.  All rights reserved.
+ *
+ * Authors:
+ *   Boaz Harrosh <ooo@electrozaur.com>
+ *   Benny Halevy <bhalevy@panasas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ *
+ */
+#ifndef __OSD_SEC_H__
+#define __OSD_SEC_H__
+
+#include <scsi/osd_protocol.h>
+#include <scsi/osd_types.h>
+
+/*
+ * Contains types and constants of osd capabilities and security
+ * encoding/decoding.
+ * API is trying to keep security abstract so initiator of an object
+ * based pNFS client knows as little as possible about security and
+ * capabilities. It is the Server's osd-initiator place to know more.
+ * Also can be used by osd-target.
+ */
+void osd_sec_encode_caps(void *caps, ...);/* NI */
+void osd_sec_init_nosec_doall_caps(void *caps,
+	const struct osd_obj_id *obj, bool is_collection, const bool is_v1);
+
+bool osd_is_sec_alldata(struct osd_security_parameters *sec_params);
+
+/* Conditionally sign the CDB according to security setting in ocdb
+ * with cap_key */
+void osd_sec_sign_cdb(struct osd_cdb *ocdb, const u8 *cap_key);
+
+/* Unconditionally sign the BIO data with cap_key.
+ * Check for osd_is_sec_alldata() was done prior to calling this. */
+void osd_sec_sign_data(void *data_integ, struct bio *bio, const u8 *cap_key);
+
+/* Version independent copy of caps into the cdb */
+void osd_set_caps(struct osd_cdb *cdb, const void *caps);
+
+#endif /* ndef __OSD_SEC_H__ */
diff --git a/include/scsi/osd_sense.h b/include/scsi/osd_sense.h
new file mode 100644
index 000000000..d52aa93a0
--- /dev/null
+++ b/include/scsi/osd_sense.h
@@ -0,0 +1,263 @@
+/*
+ * osd_sense.h - OSD Related sense handling definitions.
+ *
+ * Copyright (C) 2008 Panasas Inc.  All rights reserved.
+ *
+ * Authors:
+ *   Boaz Harrosh <ooo@electrozaur.com>
+ *   Benny Halevy <bhalevy@panasas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ *
+ * This file contains types and constants that are defined by the protocol
+ * Note: All names and symbols are taken from the OSD standard's text.
+ */
+#ifndef __OSD_SENSE_H__
+#define __OSD_SENSE_H__
+
+#include <scsi/osd_protocol.h>
+
+/* SPC3r23 4.5.6 Sense key and sense code definitions table 27 */
+enum scsi_sense_keys {
+	scsi_sk_no_sense        = 0x0,
+	scsi_sk_recovered_error = 0x1,
+	scsi_sk_not_ready       = 0x2,
+	scsi_sk_medium_error    = 0x3,
+	scsi_sk_hardware_error  = 0x4,
+	scsi_sk_illegal_request = 0x5,
+	scsi_sk_unit_attention  = 0x6,
+	scsi_sk_data_protect    = 0x7,
+	scsi_sk_blank_check     = 0x8,
+	scsi_sk_vendor_specific = 0x9,
+	scsi_sk_copy_aborted    = 0xa,
+	scsi_sk_aborted_command = 0xb,
+	scsi_sk_volume_overflow = 0xd,
+	scsi_sk_miscompare      = 0xe,
+	scsi_sk_reserved        = 0xf,
+};
+
+/* SPC3r23 4.5.6 Sense key and sense code definitions table 28 */
+/* Note: only those which can be returned by an OSD target. Most of
+ *       these errors are taken care of by the generic scsi layer.
+ */
+enum osd_additional_sense_codes {
+	scsi_no_additional_sense_information			= 0x0000,
+	scsi_operation_in_progress				= 0x0016,
+	scsi_cleaning_requested					= 0x0017,
+	scsi_lunr_cause_not_reportable				= 0x0400,
+	scsi_logical_unit_is_in_process_of_becoming_ready	= 0x0401,
+	scsi_lunr_initializing_command_required			= 0x0402,
+	scsi_lunr_manual_intervention_required			= 0x0403,
+	scsi_lunr_operation_in_progress				= 0x0407,
+	scsi_lunr_selftest_in_progress				= 0x0409,
+	scsi_luna_asymmetric_access_state_transition		= 0x040a,
+	scsi_luna_target_port_in_standby_state			= 0x040b,
+	scsi_luna_target_port_in_unavailable_state		= 0x040c,
+	scsi_lunr_notify_enable_spinup_required			= 0x0411,
+	scsi_logical_unit_does_not_respond_to_selection		= 0x0500,
+	scsi_logical_unit_communication_failure			= 0x0800,
+	scsi_logical_unit_communication_timeout			= 0x0801,
+	scsi_logical_unit_communication_parity_error		= 0x0802,
+	scsi_error_log_overflow					= 0x0a00,
+	scsi_warning						= 0x0b00,
+	scsi_warning_specified_temperature_exceeded		= 0x0b01,
+	scsi_warning_enclosure_degraded				= 0x0b02,
+	scsi_write_error_unexpected_unsolicited_data		= 0x0c0c,
+	scsi_write_error_not_enough_unsolicited_data		= 0x0c0d,
+	scsi_invalid_information_unit				= 0x0e00,
+	scsi_invalid_field_in_command_information_unit		= 0x0e03,
+	scsi_read_error_failed_retransmission_request		= 0x1113,
+	scsi_parameter_list_length_error			= 0x1a00,
+	scsi_invalid_command_operation_code			= 0x2000,
+	scsi_invalid_field_in_cdb				= 0x2400,
+	osd_security_audit_value_frozen				= 0x2404,
+	osd_security_working_key_frozen				= 0x2405,
+	osd_nonce_not_unique					= 0x2406,
+	osd_nonce_timestamp_out_of_range			= 0x2407,
+	scsi_logical_unit_not_supported				= 0x2500,
+	scsi_invalid_field_in_parameter_list			= 0x2600,
+	scsi_parameter_not_supported				= 0x2601,
+	scsi_parameter_value_invalid				= 0x2602,
+	scsi_invalid_release_of_persistent_reservation		= 0x2604,
+	osd_invalid_dataout_buffer_integrity_check_value	= 0x260f,
+	scsi_not_ready_to_ready_change_medium_may_have_changed	= 0x2800,
+	scsi_power_on_reset_or_bus_device_reset_occurred	= 0x2900,
+	scsi_power_on_occurred					= 0x2901,
+	scsi_scsi_bus_reset_occurred				= 0x2902,
+	scsi_bus_device_reset_function_occurred			= 0x2903,
+	scsi_device_internal_reset				= 0x2904,
+	scsi_transceiver_mode_changed_to_single_ended		= 0x2905,
+	scsi_transceiver_mode_changed_to_lvd			= 0x2906,
+	scsi_i_t_nexus_loss_occurred				= 0x2907,
+	scsi_parameters_changed					= 0x2a00,
+	scsi_mode_parameters_changed				= 0x2a01,
+	scsi_asymmetric_access_state_changed			= 0x2a06,
+	scsi_priority_changed					= 0x2a08,
+	scsi_command_sequence_error				= 0x2c00,
+	scsi_previous_busy_status				= 0x2c07,
+	scsi_previous_task_set_full_status			= 0x2c08,
+	scsi_previous_reservation_conflict_status		= 0x2c09,
+	osd_partition_or_collection_contains_user_objects	= 0x2c0a,
+	scsi_commands_cleared_by_another_initiator		= 0x2f00,
+	scsi_cleaning_failure					= 0x3007,
+	scsi_enclosure_failure					= 0x3400,
+	scsi_enclosure_services_failure				= 0x3500,
+	scsi_unsupported_enclosure_function			= 0x3501,
+	scsi_enclosure_services_unavailable			= 0x3502,
+	scsi_enclosure_services_transfer_failure		= 0x3503,
+	scsi_enclosure_services_transfer_refused		= 0x3504,
+	scsi_enclosure_services_checksum_error			= 0x3505,
+	scsi_rounded_parameter					= 0x3700,
+	osd_read_past_end_of_user_object			= 0x3b17,
+	scsi_logical_unit_has_not_self_configured_yet		= 0x3e00,
+	scsi_logical_unit_failure				= 0x3e01,
+	scsi_timeout_on_logical_unit				= 0x3e02,
+	scsi_logical_unit_failed_selftest			= 0x3e03,
+	scsi_logical_unit_unable_to_update_selftest_log		= 0x3e04,
+	scsi_target_operating_conditions_have_changed		= 0x3f00,
+	scsi_microcode_has_been_changed				= 0x3f01,
+	scsi_inquiry_data_has_changed				= 0x3f03,
+	scsi_echo_buffer_overwritten				= 0x3f0f,
+	scsi_diagnostic_failure_on_component_nn_first		= 0x4080,
+	scsi_diagnostic_failure_on_component_nn_last		= 0x40ff,
+	scsi_message_error					= 0x4300,
+	scsi_internal_target_failure				= 0x4400,
+	scsi_select_or_reselect_failure				= 0x4500,
+	scsi_scsi_parity_error					= 0x4700,
+	scsi_data_phase_crc_error_detected			= 0x4701,
+	scsi_scsi_parity_error_detected_during_st_data_phase	= 0x4702,
+	scsi_asynchronous_information_protection_error_detected	= 0x4704,
+	scsi_protocol_service_crc_error				= 0x4705,
+	scsi_phy_test_function_in_progress			= 0x4706,
+	scsi_invalid_message_error				= 0x4900,
+	scsi_command_phase_error				= 0x4a00,
+	scsi_data_phase_error					= 0x4b00,
+	scsi_logical_unit_failed_self_configuration		= 0x4c00,
+	scsi_overlapped_commands_attempted			= 0x4e00,
+	osd_quota_error						= 0x5507,
+	scsi_failure_prediction_threshold_exceeded		= 0x5d00,
+	scsi_failure_prediction_threshold_exceeded_false	= 0x5dff,
+	scsi_voltage_fault					= 0x6500,
+};
+
+enum scsi_descriptor_types {
+	scsi_sense_information			= 0x0,
+	scsi_sense_command_specific_information	= 0x1,
+	scsi_sense_key_specific			= 0x2,
+	scsi_sense_field_replaceable_unit	= 0x3,
+	scsi_sense_stream_commands		= 0x4,
+	scsi_sense_block_commands		= 0x5,
+	osd_sense_object_identification		= 0x6,
+	osd_sense_response_integrity_check	= 0x7,
+	osd_sense_attribute_identification	= 0x8,
+	scsi_sense_ata_return			= 0x9,
+
+	scsi_sense_Reserved_first		= 0x0A,
+	scsi_sense_Reserved_last		= 0x7F,
+	scsi_sense_Vendor_specific_first	= 0x80,
+	scsi_sense_Vendor_specific_last		= 0xFF,
+};
+
+struct scsi_sense_descriptor { /* for picking into desc type */
+	u8	descriptor_type; /* one of enum scsi_descriptor_types */
+	u8	additional_length; /* n - 1 */
+	u8	data[];
+} __packed;
+
+/* OSD deploys only scsi descriptor_based sense buffers */
+struct scsi_sense_descriptor_based {
+/*0*/	u8 	response_code; /* 0x72 or 0x73 */
+/*1*/	u8 	sense_key; /* one of enum scsi_sense_keys (4 lower bits) */
+/*2*/	__be16	additional_sense_code; /* enum osd_additional_sense_codes */
+/*4*/	u8	Reserved[3];
+/*7*/	u8	additional_sense_length; /* n - 7 */
+/*8*/	struct	scsi_sense_descriptor ssd[0]; /* variable length, 1 or more */
+} __packed;
+
+/* some descriptors deployed by OSD */
+
+/* SPC3r23 4.5.2.3 Command-specific information sense data descriptor */
+/* Note: this is the same for descriptor_type=00 but with type=00 the
+ *        Reserved[0] == 0x80 (ie. bit-7 set)
+ */
+struct scsi_sense_command_specific_data_descriptor {
+/*0*/	u8	descriptor_type; /* (00h/01h) */
+/*1*/	u8	additional_length; /* (0Ah) */
+/*2*/	u8	Reserved[2];
+/*4*/	__be64  information;
+} __packed;
+/*12*/
+
+struct scsi_sense_key_specific_data_descriptor {
+/*0*/	u8	descriptor_type; /* (02h) */
+/*1*/	u8	additional_length; /* (06h) */
+/*2*/	u8	Reserved[2];
+/* SKSV, C/D, Reserved (2), BPV, BIT POINTER (3) */
+/*4*/	u8	sksv_cd_bpv_bp;
+/*5*/	__be16	value; /* field-pointer/progress-value/retry-count/... */
+/*7*/	u8	Reserved2;
+} __packed;
+/*8*/
+
+/* 4.16.2.1 OSD error identification sense data descriptor - table 52 */
+/* Note: these bits are defined LE order for easy definition, this way the BIT()
+ * number is the same as in the documentation. Below members at
+ * osd_sense_identification_data_descriptor are therefore defined __le32.
+ */
+enum osd_command_functions_bits {
+	OSD_CFB_COMMAND		 = BIT(4),
+	OSD_CFB_CMD_CAP_VERIFIED = BIT(5),
+	OSD_CFB_VALIDATION	 = BIT(7),
+	OSD_CFB_IMP_ST_ATT	 = BIT(12),
+	OSD_CFB_SET_ATT		 = BIT(20),
+	OSD_CFB_SA_CAP_VERIFIED	 = BIT(21),
+	OSD_CFB_GET_ATT		 = BIT(28),
+	OSD_CFB_GA_CAP_VERIFIED	 = BIT(29),
+};
+
+struct osd_sense_identification_data_descriptor {
+/*0*/	u8	descriptor_type; /* (06h) */
+/*1*/	u8	additional_length; /* (1Eh) */
+/*2*/	u8	Reserved[6];
+/*8*/	__le32	not_initiated_functions; /*osd_command_functions_bits*/
+/*12*/	__le32	completed_functions; /*osd_command_functions_bits*/
+/*16*/ 	__be64	partition_id;
+/*24*/	__be64	object_id;
+} __packed;
+/*32*/
+
+struct osd_sense_response_integrity_check_descriptor {
+/*0*/	u8	descriptor_type; /* (07h) */
+/*1*/	u8	additional_length; /* (20h) */
+/*2*/	u8	integrity_check_value[32]; /*FIXME: OSDv2_CRYPTO_KEYID_SIZE*/
+} __packed;
+/*34*/
+
+struct osd_sense_attributes_data_descriptor {
+/*0*/	u8	descriptor_type; /* (08h) */
+/*1*/	u8	additional_length; /* (n-2) */
+/*2*/	u8	Reserved[6];
+	struct osd_sense_attr {
+/*8*/		__be32	attr_page;
+/*12*/		__be32	attr_id;
+/*16*/	} sense_attrs[0]; /* 1 or more */
+} __packed;
+/*variable*/
+
+/* Dig into scsi_sk_illegal_request/scsi_invalid_field_in_cdb errors */
+
+/*FIXME: Support also field in CAPS*/
+#define OSD_CDB_OFFSET(F) offsetof(struct osd_cdb_head, F)
+
+enum osdv2_cdb_field_offset {
+	OSDv1_CFO_STARTING_BYTE	= OSD_CDB_OFFSET(v1.start_address),
+	OSD_CFO_STARTING_BYTE	= OSD_CDB_OFFSET(v2.start_address),
+	OSD_CFO_PARTITION_ID	= OSD_CDB_OFFSET(partition),
+	OSD_CFO_OBJECT_ID	= OSD_CDB_OFFSET(object),
+	OSD_CFO_PERMISSIONS	= sizeof(struct osd_cdb_head) +
+					offsetof(struct osd_capability_head,
+						 permissions_bit_mask),
+};
+
+#endif /* ndef __OSD_SENSE_H__ */
diff --git a/include/scsi/osd_types.h b/include/scsi/osd_types.h
new file mode 100644
index 000000000..48e8a165e
--- /dev/null
+++ b/include/scsi/osd_types.h
@@ -0,0 +1,45 @@
+/*
+ * osd_types.h - Types and constants which are not part of the protocol.
+ *
+ * Copyright (C) 2008 Panasas Inc.  All rights reserved.
+ *
+ * Authors:
+ *   Boaz Harrosh <ooo@electrozaur.com>
+ *   Benny Halevy <bhalevy@panasas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ *
+ * Contains types and constants that are implementation specific and are
+ * used by more than one part of the osd library.
+ *     (Eg initiator/target/security_manager/...)
+ */
+#ifndef __OSD_TYPES_H__
+#define __OSD_TYPES_H__
+
+struct osd_systemid {
+	u8 data[OSD_SYSTEMID_LEN];
+};
+
+typedef u64 __bitwise osd_id;
+
+struct osd_obj_id {
+	osd_id partition;
+	osd_id id;
+};
+
+static const struct __weak osd_obj_id osd_root_object = {0, 0};
+
+struct osd_attr {
+	u32 attr_page;
+	u32 attr_id;
+	u16 len;		/* byte count of operand */
+	void *val_ptr;		/* in network order */
+};
+
+struct osd_sg_entry {
+	u64 offset;
+	u64 len;
+};
+
+#endif /* ndef __OSD_TYPES_H__ */
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
new file mode 100644
index 000000000..42a84ef42
--- /dev/null
+++ b/include/scsi/sas.h
@@ -0,0 +1,727 @@
+/*
+ * SAS structures and definitions header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _SAS_H_
+#define _SAS_H_
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define SAS_ADDR_SIZE        8
+#define HASHED_SAS_ADDR_SIZE 3
+#define SAS_ADDR(_sa) ((unsigned long long) be64_to_cpu(*(__be64 *)(_sa)))
+
+#define SMP_REQUEST             0x40
+#define SMP_RESPONSE            0x41
+
+#define SSP_DATA                0x01
+#define SSP_XFER_RDY            0x05
+#define SSP_COMMAND             0x06
+#define SSP_RESPONSE            0x07
+#define SSP_TASK                0x16
+
+#define SMP_REPORT_GENERAL       0x00
+#define SMP_REPORT_MANUF_INFO    0x01
+#define SMP_READ_GPIO_REG        0x02
+#define SMP_DISCOVER             0x10
+#define SMP_REPORT_PHY_ERR_LOG   0x11
+#define SMP_REPORT_PHY_SATA      0x12
+#define SMP_REPORT_ROUTE_INFO    0x13
+#define SMP_WRITE_GPIO_REG       0x82
+#define SMP_CONF_ROUTE_INFO      0x90
+#define SMP_PHY_CONTROL          0x91
+#define SMP_PHY_TEST_FUNCTION    0x92
+
+#define SMP_RESP_FUNC_ACC        0x00
+#define SMP_RESP_FUNC_UNK        0x01
+#define SMP_RESP_FUNC_FAILED     0x02
+#define SMP_RESP_INV_FRM_LEN     0x03
+#define SMP_RESP_NO_PHY          0x10
+#define SMP_RESP_NO_INDEX        0x11
+#define SMP_RESP_PHY_NO_SATA     0x12
+#define SMP_RESP_PHY_UNK_OP      0x13
+#define SMP_RESP_PHY_UNK_TESTF   0x14
+#define SMP_RESP_PHY_TEST_INPROG 0x15
+#define SMP_RESP_PHY_VACANT      0x16
+
+/* SAM TMFs */
+#define TMF_ABORT_TASK      0x01
+#define TMF_ABORT_TASK_SET  0x02
+#define TMF_CLEAR_TASK_SET  0x04
+#define TMF_LU_RESET        0x08
+#define TMF_CLEAR_ACA       0x40
+#define TMF_QUERY_TASK      0x80
+
+/* SAS TMF responses */
+#define TMF_RESP_FUNC_COMPLETE   0x00
+#define TMF_RESP_INVALID_FRAME   0x02
+#define TMF_RESP_FUNC_ESUPP      0x04
+#define TMF_RESP_FUNC_FAILED     0x05
+#define TMF_RESP_FUNC_SUCC       0x08
+#define TMF_RESP_NO_LUN          0x09
+#define TMF_RESP_OVERLAPPED_TAG  0x0A
+
+enum sas_oob_mode {
+	OOB_NOT_CONNECTED,
+	SATA_OOB_MODE,
+	SAS_OOB_MODE
+};
+
+/* See sas_discover.c if you plan on changing these */
+enum sas_device_type {
+	/* these are SAS protocol defined (attached device type field) */
+	SAS_PHY_UNUSED = 0,
+	SAS_END_DEVICE = 1,
+	SAS_EDGE_EXPANDER_DEVICE = 2,
+	SAS_FANOUT_EXPANDER_DEVICE = 3,
+	/* these are internal to libsas */
+	SAS_HA = 4,
+	SAS_SATA_DEV = 5,
+	SAS_SATA_PM = 7,
+	SAS_SATA_PM_PORT = 8,
+	SAS_SATA_PENDING = 9,
+};
+
+enum sas_protocol {
+	SAS_PROTOCOL_NONE		= 0,
+	SAS_PROTOCOL_SATA		= 0x01,
+	SAS_PROTOCOL_SMP		= 0x02,
+	SAS_PROTOCOL_STP		= 0x04,
+	SAS_PROTOCOL_SSP		= 0x08,
+	SAS_PROTOCOL_ALL		= 0x0E,
+	SAS_PROTOCOL_STP_ALL		= SAS_PROTOCOL_STP|SAS_PROTOCOL_SATA,
+};
+
+/* From the spec; local phys only */
+enum phy_func {
+	PHY_FUNC_NOP,
+	PHY_FUNC_LINK_RESET,		  /* Enables the phy */
+	PHY_FUNC_HARD_RESET,
+	PHY_FUNC_DISABLE,
+	PHY_FUNC_CLEAR_ERROR_LOG = 5,
+	PHY_FUNC_CLEAR_AFFIL,
+	PHY_FUNC_TX_SATA_PS_SIGNAL,
+	PHY_FUNC_RELEASE_SPINUP_HOLD = 0x10, /* LOCAL PORT ONLY! */
+	PHY_FUNC_SET_LINK_RATE,
+	PHY_FUNC_GET_EVENTS,
+};
+
+/* SAS LLDD would need to report only _very_few_ of those, like BROADCAST.
+ * Most of those are here for completeness.
+ */
+enum sas_prim {
+	SAS_PRIM_AIP_NORMAL = 1,
+	SAS_PRIM_AIP_R0     = 2,
+	SAS_PRIM_AIP_R1     = 3,
+	SAS_PRIM_AIP_R2     = 4,
+	SAS_PRIM_AIP_WC     = 5,
+	SAS_PRIM_AIP_WD     = 6,
+	SAS_PRIM_AIP_WP     = 7,
+	SAS_PRIM_AIP_RWP    = 8,
+
+	SAS_PRIM_BC_CH      = 9,
+	SAS_PRIM_BC_RCH0    = 10,
+	SAS_PRIM_BC_RCH1    = 11,
+	SAS_PRIM_BC_R0      = 12,
+	SAS_PRIM_BC_R1      = 13,
+	SAS_PRIM_BC_R2      = 14,
+	SAS_PRIM_BC_R3      = 15,
+	SAS_PRIM_BC_R4      = 16,
+
+	SAS_PRIM_NOTIFY_ENSP= 17,
+	SAS_PRIM_NOTIFY_R0  = 18,
+	SAS_PRIM_NOTIFY_R1  = 19,
+	SAS_PRIM_NOTIFY_R2  = 20,
+
+	SAS_PRIM_CLOSE_CLAF = 21,
+	SAS_PRIM_CLOSE_NORM = 22,
+	SAS_PRIM_CLOSE_R0   = 23,
+	SAS_PRIM_CLOSE_R1   = 24,
+
+	SAS_PRIM_OPEN_RTRY  = 25,
+	SAS_PRIM_OPEN_RJCT  = 26,
+	SAS_PRIM_OPEN_ACPT  = 27,
+
+	SAS_PRIM_DONE       = 28,
+	SAS_PRIM_BREAK      = 29,
+
+	SATA_PRIM_DMAT      = 33,
+	SATA_PRIM_PMNAK     = 34,
+	SATA_PRIM_PMACK     = 35,
+	SATA_PRIM_PMREQ_S   = 36,
+	SATA_PRIM_PMREQ_P   = 37,
+	SATA_SATA_R_ERR     = 38,
+};
+
+enum sas_open_rej_reason {
+	/* Abandon open */
+	SAS_OREJ_UNKNOWN   = 0,
+	SAS_OREJ_BAD_DEST  = 1,
+	SAS_OREJ_CONN_RATE = 2,
+	SAS_OREJ_EPROTO    = 3,
+	SAS_OREJ_RESV_AB0  = 4,
+	SAS_OREJ_RESV_AB1  = 5,
+	SAS_OREJ_RESV_AB2  = 6,
+	SAS_OREJ_RESV_AB3  = 7,
+	SAS_OREJ_WRONG_DEST= 8,
+	SAS_OREJ_STP_NORES = 9,
+
+	/* Retry open */
+	SAS_OREJ_NO_DEST   = 10,
+	SAS_OREJ_PATH_BLOCKED = 11,
+	SAS_OREJ_RSVD_CONT0 = 12,
+	SAS_OREJ_RSVD_CONT1 = 13,
+	SAS_OREJ_RSVD_INIT0 = 14,
+	SAS_OREJ_RSVD_INIT1 = 15,
+	SAS_OREJ_RSVD_STOP0 = 16,
+	SAS_OREJ_RSVD_STOP1 = 17,
+	SAS_OREJ_RSVD_RETRY = 18,
+};
+
+enum sas_gpio_reg_type {
+	SAS_GPIO_REG_CFG   = 0,
+	SAS_GPIO_REG_RX    = 1,
+	SAS_GPIO_REG_RX_GP = 2,
+	SAS_GPIO_REG_TX    = 3,
+	SAS_GPIO_REG_TX_GP = 4,
+};
+
+struct  dev_to_host_fis {
+	u8     fis_type;	  /* 0x34 */
+	u8     flags;
+	u8     status;
+	u8     error;
+
+	u8     lbal;
+	union { u8 lbam; u8 byte_count_low; };
+	union { u8 lbah; u8 byte_count_high; };
+	u8     device;
+
+	u8     lbal_exp;
+	u8     lbam_exp;
+	u8     lbah_exp;
+	u8     _r_a;
+
+	union { u8  sector_count; u8 interrupt_reason; };
+	u8     sector_count_exp;
+	u8     _r_b;
+	u8     _r_c;
+
+	u32    _r_d;
+} __attribute__ ((packed));
+
+struct host_to_dev_fis {
+	u8     fis_type;	  /* 0x27 */
+	u8     flags;
+	u8     command;
+	u8     features;
+
+	u8     lbal;
+	union { u8 lbam; u8 byte_count_low; };
+	union { u8 lbah; u8 byte_count_high; };
+	u8     device;
+
+	u8     lbal_exp;
+	u8     lbam_exp;
+	u8     lbah_exp;
+	u8     features_exp;
+
+	union { u8  sector_count; u8 interrupt_reason; };
+	u8     sector_count_exp;
+	u8     _r_a;
+	u8     control;
+
+	u32    _r_b;
+} __attribute__ ((packed));
+
+/* Prefer to have code clarity over header file clarity.
+ */
+#ifdef __LITTLE_ENDIAN_BITFIELD
+struct sas_identify_frame {
+	/* Byte 0 */
+	u8  frame_type:4;
+	u8  dev_type:3;
+	u8  _un0:1;
+
+	/* Byte 1 */
+	u8  _un1;
+
+	/* Byte 2 */
+	union {
+		struct {
+			u8  _un20:1;
+			u8  smp_iport:1;
+			u8  stp_iport:1;
+			u8  ssp_iport:1;
+			u8  _un247:4;
+		};
+		u8 initiator_bits;
+	};
+
+	/* Byte 3 */
+	union {
+		struct {
+			u8  _un30:1;
+			u8 smp_tport:1;
+			u8 stp_tport:1;
+			u8 ssp_tport:1;
+			u8 _un347:4;
+		};
+		u8 target_bits;
+	};
+
+	/* Byte 4 - 11 */
+	u8 _un4_11[8];
+
+	/* Byte 12 - 19 */
+	u8 sas_addr[SAS_ADDR_SIZE];
+
+	/* Byte 20 */
+	u8 phy_id;
+
+	u8 _un21_27[7];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+	u8     frame_type;
+	u8     hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+	u8     _r_a;
+	u8     hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+	__be16 _r_b;
+
+	u8     changing_data_ptr:1;
+	u8     retransmit:1;
+	u8     retry_data_frames:1;
+	u8     _r_c:5;
+
+	u8     num_fill_bytes:2;
+	u8     _r_d:6;
+
+	u32    _r_e;
+	__be16 tag;
+	__be16 tptt;
+	__be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+	u8     _r_a[10];
+
+	u8     datapres:2;
+	u8     _r_b:6;
+
+	u8     status;
+
+	u32    _r_c;
+
+	__be32 sense_data_len;
+	__be32 response_data_len;
+
+	u8     resp_data[0];
+	u8     sense_data[0];
+} __attribute__ ((packed));
+
+struct ssp_command_iu {
+	u8     lun[8];
+	u8     _r_a;
+
+	union {
+		struct {
+			u8  attr:3;
+			u8  prio:4;
+			u8  efb:1;
+		};
+		u8 efb_prio_attr;
+	};
+
+	u8    _r_b;
+
+	u8    _r_c:2;
+	u8    add_cdb_len:6;
+
+	u8    cdb[16];
+	u8    add_cdb[0];
+} __attribute__ ((packed));
+
+struct xfer_rdy_iu {
+	__be32 requested_offset;
+	__be32 write_data_len;
+	__be32 _r_a;
+} __attribute__ ((packed));
+
+struct ssp_tmf_iu {
+	u8     lun[8];
+	u16    _r_a;
+	u8     tmf;
+	u8     _r_b;
+	__be16 tag;
+	u8     _r_c[14];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+	__be16  change_count;
+	__be16  route_indexes;
+	u8      _r_a;
+	u8      num_phys;
+
+	u8      conf_route_table:1;
+	u8      configuring:1;
+	u8	config_others:1;
+	u8	orej_retry_supp:1;
+	u8	stp_cont_awt:1;
+	u8	self_config:1;
+	u8	zone_config:1;
+	u8	t2t_supp:1;
+
+	u8      _r_c;
+
+	u8      enclosure_logical_id[8];
+
+	u8      _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	__be16 _r_b;
+
+	u8    _r_c:4;
+	u8    attached_dev_type:3;
+	u8    _r_d:1;
+
+	u8    linkrate:4;
+	u8    _r_e:4;
+
+	u8    attached_sata_host:1;
+	u8    iproto:3;
+	u8    _r_f:4;
+
+	u8    attached_sata_dev:1;
+	u8    tproto:3;
+	u8    _r_g:3;
+	u8    attached_sata_ps:1;
+
+	u8    sas_addr[8];
+	u8    attached_sas_addr[8];
+	u8    attached_phy_id;
+
+	u8    _r_h[7];
+
+	u8    hmin_linkrate:4;
+	u8    pmin_linkrate:4;
+	u8    hmax_linkrate:4;
+	u8    pmax_linkrate:4;
+
+	u8    change_count;
+
+	u8    pptv:4;
+	u8    _r_i:3;
+	u8    virtual:1;
+
+	u8    routing_attr:4;
+	u8    _r_j:4;
+
+	u8    conn_type;
+	u8    conn_el_index;
+	u8    conn_phy_link;
+
+	u8    _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	u8    _r_b;
+
+	u8    affil_valid:1;
+	u8    affil_supp:1;
+	u8    _r_c:6;
+
+	u32    _r_d;
+
+	u8    stp_sas_addr[8];
+
+	struct dev_to_host_fis fis;
+
+	u32   _r_e;
+
+	u8    affil_stp_ini_addr[8];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+	u8    frame_type;
+	u8    function;
+	u8    result;
+	u8    reserved;
+	union {
+		struct report_general_resp  rg;
+		struct discover_resp        disc;
+		struct report_phy_sata_resp rps;
+	};
+} __attribute__ ((packed));
+
+#elif defined(__BIG_ENDIAN_BITFIELD)
+struct sas_identify_frame {
+	/* Byte 0 */
+	u8  _un0:1;
+	u8  dev_type:3;
+	u8  frame_type:4;
+
+	/* Byte 1 */
+	u8  _un1;
+
+	/* Byte 2 */
+	union {
+		struct {
+			u8  _un247:4;
+			u8  ssp_iport:1;
+			u8  stp_iport:1;
+			u8  smp_iport:1;
+			u8  _un20:1;
+		};
+		u8 initiator_bits;
+	};
+
+	/* Byte 3 */
+	union {
+		struct {
+			u8 _un347:4;
+			u8 ssp_tport:1;
+			u8 stp_tport:1;
+			u8 smp_tport:1;
+			u8 _un30:1;
+		};
+		u8 target_bits;
+	};
+
+	/* Byte 4 - 11 */
+	u8 _un4_11[8];
+
+	/* Byte 12 - 19 */
+	u8 sas_addr[SAS_ADDR_SIZE];
+
+	/* Byte 20 */
+	u8 phy_id;
+
+	u8 _un21_27[7];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+	u8     frame_type;
+	u8     hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+	u8     _r_a;
+	u8     hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+	__be16 _r_b;
+
+	u8     _r_c:5;
+	u8     retry_data_frames:1;
+	u8     retransmit:1;
+	u8     changing_data_ptr:1;
+
+	u8     _r_d:6;
+	u8     num_fill_bytes:2;
+
+	u32    _r_e;
+	__be16 tag;
+	__be16 tptt;
+	__be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+	u8     _r_a[10];
+
+	u8     _r_b:6;
+	u8     datapres:2;
+
+	u8     status;
+
+	u32    _r_c;
+
+	__be32 sense_data_len;
+	__be32 response_data_len;
+
+	u8     resp_data[0];
+	u8     sense_data[0];
+} __attribute__ ((packed));
+
+struct ssp_command_iu {
+	u8     lun[8];
+	u8     _r_a;
+
+	union {
+		struct {
+			u8  efb:1;
+			u8  prio:4;
+			u8  attr:3;
+		};
+		u8 efb_prio_attr;
+	};
+
+	u8    _r_b;
+
+	u8    add_cdb_len:6;
+	u8    _r_c:2;
+
+	u8    cdb[16];
+	u8    add_cdb[0];
+} __attribute__ ((packed));
+
+struct xfer_rdy_iu {
+	__be32 requested_offset;
+	__be32 write_data_len;
+	__be32 _r_a;
+} __attribute__ ((packed));
+
+struct ssp_tmf_iu {
+	u8     lun[8];
+	u16    _r_a;
+	u8     tmf;
+	u8     _r_b;
+	__be16 tag;
+	u8     _r_c[14];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+	__be16  change_count;
+	__be16  route_indexes;
+	u8      _r_a;
+	u8      num_phys;
+
+	u8	t2t_supp:1;
+	u8	zone_config:1;
+	u8	self_config:1;
+	u8	stp_cont_awt:1;
+	u8	orej_retry_supp:1;
+	u8	config_others:1;
+	u8      configuring:1;
+	u8      conf_route_table:1;
+
+	u8      _r_c;
+
+	u8      enclosure_logical_id[8];
+
+	u8      _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	__be16 _r_b;
+
+	u8    _r_d:1;
+	u8    attached_dev_type:3;
+	u8    _r_c:4;
+
+	u8    _r_e:4;
+	u8    linkrate:4;
+
+	u8    _r_f:4;
+	u8    iproto:3;
+	u8    attached_sata_host:1;
+
+	u8    attached_sata_ps:1;
+	u8    _r_g:3;
+	u8    tproto:3;
+	u8    attached_sata_dev:1;
+
+	u8    sas_addr[8];
+	u8    attached_sas_addr[8];
+	u8    attached_phy_id;
+
+	u8    _r_h[7];
+
+	u8    pmin_linkrate:4;
+	u8    hmin_linkrate:4;
+	u8    pmax_linkrate:4;
+	u8    hmax_linkrate:4;
+
+	u8    change_count;
+
+	u8    virtual:1;
+	u8    _r_i:3;
+	u8    pptv:4;
+
+	u8    _r_j:4;
+	u8    routing_attr:4;
+
+	u8    conn_type;
+	u8    conn_el_index;
+	u8    conn_phy_link;
+
+	u8    _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	u8    _r_b;
+
+	u8    _r_c:6;
+	u8    affil_supp:1;
+	u8    affil_valid:1;
+
+	u32   _r_d;
+
+	u8    stp_sas_addr[8];
+
+	struct dev_to_host_fis fis;
+
+	u32   _r_e;
+
+	u8    affil_stp_ini_addr[8];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+	u8    frame_type;
+	u8    function;
+	u8    result;
+	u8    reserved;
+	union {
+		struct report_general_resp  rg;
+		struct discover_resp        disc;
+		struct report_phy_sata_resp rps;
+	};
+} __attribute__ ((packed));
+
+#else
+#error "Bitfield order not defined!"
+#endif
+
+#endif /* _SAS_H_ */
diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h
new file mode 100644
index 000000000..00f41aeee
--- /dev/null
+++ b/include/scsi/sas_ata.h
@@ -0,0 +1,105 @@
+/*
+ * Support for SATA devices on Serial Attached SCSI (SAS) controllers
+ *
+ * Copyright (C) 2006 IBM Corporation
+ *
+ * Written by: Darrick J. Wong <djwong@us.ibm.com>, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _SAS_ATA_H_
+#define _SAS_ATA_H_
+
+#include <linux/libata.h>
+#include <scsi/libsas.h>
+
+#ifdef CONFIG_SCSI_SAS_ATA
+
+static inline int dev_is_sata(struct domain_device *dev)
+{
+	return dev->dev_type == SAS_SATA_DEV || dev->dev_type == SAS_SATA_PM ||
+	       dev->dev_type == SAS_SATA_PM_PORT || dev->dev_type == SAS_SATA_PENDING;
+}
+
+int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy);
+int sas_ata_init(struct domain_device *dev);
+void sas_ata_task_abort(struct sas_task *task);
+void sas_ata_strategy_handler(struct Scsi_Host *shost);
+void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q,
+		struct list_head *done_q);
+void sas_ata_schedule_reset(struct domain_device *dev);
+void sas_ata_wait_eh(struct domain_device *dev);
+void sas_probe_sata(struct asd_sas_port *port);
+void sas_suspend_sata(struct asd_sas_port *port);
+void sas_resume_sata(struct asd_sas_port *port);
+void sas_ata_end_eh(struct ata_port *ap);
+#else
+
+
+static inline int dev_is_sata(struct domain_device *dev)
+{
+	return 0;
+}
+static inline int sas_ata_init(struct domain_device *dev)
+{
+	return 0;
+}
+static inline void sas_ata_task_abort(struct sas_task *task)
+{
+}
+
+static inline void sas_ata_strategy_handler(struct Scsi_Host *shost)
+{
+}
+
+static inline void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q,
+			      struct list_head *done_q)
+{
+}
+
+static inline void sas_ata_schedule_reset(struct domain_device *dev)
+{
+}
+
+static inline void sas_ata_wait_eh(struct domain_device *dev)
+{
+}
+
+static inline void sas_probe_sata(struct asd_sas_port *port)
+{
+}
+
+static inline void sas_suspend_sata(struct asd_sas_port *port)
+{
+}
+
+static inline void sas_resume_sata(struct asd_sas_port *port)
+{
+}
+
+static inline int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
+{
+	return 0;
+}
+
+static inline void sas_ata_end_eh(struct ata_port *ap)
+{
+}
+#endif
+
+#endif /* _SAS_ATA_H_ */
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
new file mode 100644
index 000000000..eb7853c1a
--- /dev/null
+++ b/include/scsi/scsi.h
@@ -0,0 +1,283 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header file contains public constants and structures used by
+ * the SCSI initiator code.
+ */
+#ifndef _SCSI_SCSI_H
+#define _SCSI_SCSI_H
+
+#include <linux/types.h>
+#include <linux/scatterlist.h>
+#include <linux/kernel.h>
+#include <scsi/scsi_common.h>
+#include <scsi/scsi_proto.h>
+
+struct scsi_cmnd;
+
+enum scsi_timeouts {
+	SCSI_DEFAULT_EH_TIMEOUT		= 10 * HZ,
+};
+
+/*
+ * DIX-capable adapters effectively support infinite chaining for the
+ * protection information scatterlist
+ */
+#define SCSI_MAX_PROT_SG_SEGMENTS	0xFFFF
+
+/*
+ * Special value for scanning to specify scanning or rescanning of all
+ * possible channels, (target) ids, or luns on a given shost.
+ */
+#define SCAN_WILD_CARD	~0
+
+/** scsi_status_is_good - check the status return.
+ *
+ * @status: the status passed up from the driver (including host and
+ *          driver components)
+ *
+ * This returns true for known good conditions that may be treated as
+ * command completed normally
+ */
+static inline int scsi_status_is_good(int status)
+{
+	/*
+	 * FIXME: bit0 is listed as reserved in SCSI-2, but is
+	 * significant in SCSI-3.  For now, we follow the SCSI-2
+	 * behaviour and ignore reserved bits.
+	 */
+	status &= 0xfe;
+	return ((status == SAM_STAT_GOOD) ||
+		(status == SAM_STAT_CONDITION_MET) ||
+		/* Next two "intermediate" statuses are obsolete in SAM-4 */
+		(status == SAM_STAT_INTERMEDIATE) ||
+		(status == SAM_STAT_INTERMEDIATE_CONDITION_MET) ||
+		/* FIXME: this is obsolete in SAM-3 */
+		(status == SAM_STAT_COMMAND_TERMINATED));
+}
+
+
+/*
+ * standard mode-select header prepended to all mode-select commands
+ */
+
+struct ccs_modesel_head {
+	__u8 _r1;			/* reserved */
+	__u8 medium;		/* device-specific medium type */
+	__u8 _r2;			/* reserved */
+	__u8 block_desc_length;	/* block descriptor length */
+	__u8 density;		/* device-specific density code */
+	__u8 number_blocks_hi;	/* number of blocks in this block desc */
+	__u8 number_blocks_med;
+	__u8 number_blocks_lo;
+	__u8 _r3;
+	__u8 block_length_hi;	/* block length for blocks in this desc */
+	__u8 block_length_med;
+	__u8 block_length_lo;
+};
+
+/*
+ * The Well Known LUNS (SAM-3) in our int representation of a LUN
+ */
+#define SCSI_W_LUN_BASE 0xc100
+#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1)
+#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2)
+#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3)
+
+static inline int scsi_is_wlun(u64 lun)
+{
+	return (lun & 0xff00) == SCSI_W_LUN_BASE;
+}
+
+
+/*
+ *  MESSAGE CODES
+ */
+
+#define COMMAND_COMPLETE    0x00
+#define EXTENDED_MESSAGE    0x01
+#define     EXTENDED_MODIFY_DATA_POINTER    0x00
+#define     EXTENDED_SDTR                   0x01
+#define     EXTENDED_EXTENDED_IDENTIFY      0x02    /* SCSI-I only */
+#define     EXTENDED_WDTR                   0x03
+#define     EXTENDED_PPR                    0x04
+#define     EXTENDED_MODIFY_BIDI_DATA_PTR   0x05
+#define SAVE_POINTERS       0x02
+#define RESTORE_POINTERS    0x03
+#define DISCONNECT          0x04
+#define INITIATOR_ERROR     0x05
+#define ABORT_TASK_SET      0x06
+#define MESSAGE_REJECT      0x07
+#define NOP                 0x08
+#define MSG_PARITY_ERROR    0x09
+#define LINKED_CMD_COMPLETE 0x0a
+#define LINKED_FLG_CMD_COMPLETE 0x0b
+#define TARGET_RESET        0x0c
+#define ABORT_TASK          0x0d
+#define CLEAR_TASK_SET      0x0e
+#define INITIATE_RECOVERY   0x0f            /* SCSI-II only */
+#define RELEASE_RECOVERY    0x10            /* SCSI-II only */
+#define CLEAR_ACA           0x16
+#define LOGICAL_UNIT_RESET  0x17
+#define SIMPLE_QUEUE_TAG    0x20
+#define HEAD_OF_QUEUE_TAG   0x21
+#define ORDERED_QUEUE_TAG   0x22
+#define IGNORE_WIDE_RESIDUE 0x23
+#define ACA                 0x24
+#define QAS_REQUEST         0x55
+
+/* Old SCSI2 names, don't use in new code */
+#define BUS_DEVICE_RESET    TARGET_RESET
+#define ABORT               ABORT_TASK_SET
+
+/*
+ * Host byte codes
+ */
+
+#define DID_OK          0x00	/* NO error                                */
+#define DID_NO_CONNECT  0x01	/* Couldn't connect before timeout period  */
+#define DID_BUS_BUSY    0x02	/* BUS stayed busy through time out period */
+#define DID_TIME_OUT    0x03	/* TIMED OUT for other reason              */
+#define DID_BAD_TARGET  0x04	/* BAD target.                             */
+#define DID_ABORT       0x05	/* Told to abort for some other reason     */
+#define DID_PARITY      0x06	/* Parity error                            */
+#define DID_ERROR       0x07	/* Internal error                          */
+#define DID_RESET       0x08	/* Reset by somebody.                      */
+#define DID_BAD_INTR    0x09	/* Got an interrupt we weren't expecting.  */
+#define DID_PASSTHROUGH 0x0a	/* Force command past mid-layer            */
+#define DID_SOFT_ERROR  0x0b	/* The low level driver just wish a retry  */
+#define DID_IMM_RETRY   0x0c	/* Retry without decrementing retry count  */
+#define DID_REQUEUE	0x0d	/* Requeue command (no immediate retry) also
+				 * without decrementing the retry count	   */
+#define DID_TRANSPORT_DISRUPTED 0x0e /* Transport error disrupted execution
+				      * and the driver blocked the port to
+				      * recover the link. Transport class will
+				      * retry or fail IO */
+#define DID_TRANSPORT_FAILFAST	0x0f /* Transport class fastfailed the io */
+#define DID_TARGET_FAILURE 0x10 /* Permanent target failure, do not retry on
+				 * other paths */
+#define DID_NEXUS_FAILURE 0x11  /* Permanent nexus failure, retry on other
+				 * paths might yield different results */
+#define DID_ALLOC_FAILURE 0x12  /* Space allocation on the device failed */
+#define DID_MEDIUM_ERROR  0x13  /* Medium error */
+#define DRIVER_OK       0x00	/* Driver status                           */
+
+/*
+ *  These indicate the error that occurred, and what is available.
+ */
+
+#define DRIVER_BUSY         0x01
+#define DRIVER_SOFT         0x02
+#define DRIVER_MEDIA        0x03
+#define DRIVER_ERROR        0x04
+
+#define DRIVER_INVALID      0x05
+#define DRIVER_TIMEOUT      0x06
+#define DRIVER_HARD         0x07
+#define DRIVER_SENSE	    0x08
+
+/*
+ * Internal return values.
+ */
+
+#define NEEDS_RETRY     0x2001
+#define SUCCESS         0x2002
+#define FAILED          0x2003
+#define QUEUED          0x2004
+#define SOFT_ERROR      0x2005
+#define ADD_TO_MLQUEUE  0x2006
+#define TIMEOUT_ERROR   0x2007
+#define SCSI_RETURN_NOT_HANDLED   0x2008
+#define FAST_IO_FAIL	0x2009
+
+/*
+ * Midlevel queue return values.
+ */
+#define SCSI_MLQUEUE_HOST_BUSY   0x1055
+#define SCSI_MLQUEUE_DEVICE_BUSY 0x1056
+#define SCSI_MLQUEUE_EH_RETRY    0x1057
+#define SCSI_MLQUEUE_TARGET_BUSY 0x1058
+
+/*
+ *  Use these to separate status msg and our bytes
+ *
+ *  These are set by:
+ *
+ *      status byte = set from target device
+ *      msg_byte    = return status from host adapter itself.
+ *      host_byte   = set by low-level driver to indicate status.
+ *      driver_byte = set by mid-level.
+ */
+#define status_byte(result) (((result) >> 1) & 0x7f)
+#define msg_byte(result)    (((result) >> 8) & 0xff)
+#define host_byte(result)   (((result) >> 16) & 0xff)
+#define driver_byte(result) (((result) >> 24) & 0xff)
+
+#define sense_class(sense)  (((sense) >> 4) & 0x7)
+#define sense_error(sense)  ((sense) & 0xf)
+#define sense_valid(sense)  ((sense) & 0x80)
+
+/*
+ * default timeouts
+*/
+#define FORMAT_UNIT_TIMEOUT		(2 * 60 * 60 * HZ)
+#define START_STOP_TIMEOUT		(60 * HZ)
+#define MOVE_MEDIUM_TIMEOUT		(5 * 60 * HZ)
+#define READ_ELEMENT_STATUS_TIMEOUT	(5 * 60 * HZ)
+#define READ_DEFECT_DATA_TIMEOUT	(60 * HZ )
+
+
+#define IDENTIFY_BASE       0x80
+#define IDENTIFY(can_disconnect, lun)   (IDENTIFY_BASE |\
+		     ((can_disconnect) ?  0x40 : 0) |\
+		     ((lun) & 0x07))
+
+/*
+ *  struct scsi_device::scsi_level values. For SCSI devices other than those
+ *  prior to SCSI-2 (i.e. over 12 years old) this value is (resp[2] + 1)
+ *  where "resp" is a byte array of the response to an INQUIRY. The scsi_level
+ *  variable is visible to the user via sysfs.
+ */
+
+#define SCSI_UNKNOWN    0
+#define SCSI_1          1
+#define SCSI_1_CCS      2
+#define SCSI_2          3
+#define SCSI_3          4        /* SPC */
+#define SCSI_SPC_2      5
+#define SCSI_SPC_3      6
+
+/*
+ * INQ PERIPHERAL QUALIFIERS
+ */
+#define SCSI_INQ_PQ_CON         0x00
+#define SCSI_INQ_PQ_NOT_CON     0x01
+#define SCSI_INQ_PQ_NOT_CAP     0x03
+
+
+/*
+ * Here are some scsi specific ioctl commands which are sometimes useful.
+ *
+ * Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395
+ */
+
+/* Used to obtain PUN and LUN info.  Conflicts with CDROMAUDIOBUFSIZ */
+#define SCSI_IOCTL_GET_IDLUN		0x5382
+
+/* 0x5383 and 0x5384 were used for SCSI_IOCTL_TAGGED_{ENABLE,DISABLE} */
+
+/* Used to obtain the host number of a device. */
+#define SCSI_IOCTL_PROBE_HOST		0x5385
+
+/* Used to obtain the bus number for a device */
+#define SCSI_IOCTL_GET_BUS_NUMBER	0x5386
+
+/* Used to obtain the PCI location of a device */
+#define SCSI_IOCTL_GET_PCI		0x5387
+
+/* Pull a u32 out of a SCSI message (using BE SCSI conventions) */
+static inline __u32 scsi_to_u32(__u8 *ptr)
+{
+	return (ptr[0]<<24) + (ptr[1]<<16) + (ptr[2]<<8) + ptr[3];
+}
+
+#endif /* _SCSI_SCSI_H */
diff --git a/include/scsi/scsi_bsg_iscsi.h b/include/scsi/scsi_bsg_iscsi.h
new file mode 100644
index 000000000..fd5689d4c
--- /dev/null
+++ b/include/scsi/scsi_bsg_iscsi.h
@@ -0,0 +1,110 @@
+/*
+ *  iSCSI Transport BSG Interface
+ *
+ *  Copyright (C) 2009   James Smart, Emulex Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef SCSI_BSG_ISCSI_H
+#define SCSI_BSG_ISCSI_H
+
+/*
+ * This file intended to be included by both kernel and user space
+ */
+
+#include <scsi/scsi.h>
+
+/*
+ * iSCSI Transport SGIO v4 BSG Message Support
+ */
+
+/* Default BSG request timeout (in seconds) */
+#define ISCSI_DEFAULT_BSG_TIMEOUT      (10 * HZ)
+
+
+/*
+ * Request Message Codes supported by the iSCSI Transport
+ */
+
+/* define the class masks for the message codes */
+#define ISCSI_BSG_CLS_MASK     0xF0000000      /* find object class */
+#define ISCSI_BSG_HST_MASK     0x80000000      /* iscsi host class */
+
+/* iscsi host Message Codes */
+#define ISCSI_BSG_HST_VENDOR           (ISCSI_BSG_HST_MASK | 0x000000FF)
+
+
+/*
+ * iSCSI Host Messages
+ */
+
+/* ISCSI_BSG_HST_VENDOR : */
+
+/* Request:
+ * Note: When specifying vendor_id, be sure to read the Vendor Type and ID
+ *   formatting requirements specified in scsi_netlink.h
+ */
+struct iscsi_bsg_host_vendor {
+	/*
+	 * Identifies the vendor that the message is formatted for. This
+	 * should be the recipient of the message.
+	 */
+	uint64_t vendor_id;
+
+	/* start of vendor command area */
+	uint32_t vendor_cmd[0];
+};
+
+/* Response:
+ */
+struct iscsi_bsg_host_vendor_reply {
+	/* start of vendor response area */
+	uint32_t vendor_rsp[0];
+};
+
+
+/* request (CDB) structure of the sg_io_v4 */
+struct iscsi_bsg_request {
+	uint32_t msgcode;
+	union {
+		struct iscsi_bsg_host_vendor    h_vendor;
+	} rqst_data;
+} __attribute__((packed));
+
+
+/* response (request sense data) structure of the sg_io_v4 */
+struct iscsi_bsg_reply {
+	/*
+	 * The completion result. Result exists in two forms:
+	 * if negative, it is an -Exxx system errno value. There will
+	 * be no further reply information supplied.
+	 * else, it's the 4-byte scsi error result, with driver, host,
+	 * msg and status fields. The per-msgcode reply structure
+	 * will contain valid data.
+	 */
+	uint32_t result;
+
+	/* If there was reply_payload, how much was recevied ? */
+	uint32_t reply_payload_rcv_len;
+
+	union {
+		struct iscsi_bsg_host_vendor_reply      vendor_reply;
+	} reply_data;
+};
+
+
+#endif /* SCSI_BSG_ISCSI_H */
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
new file mode 100644
index 000000000..c891ada3c
--- /dev/null
+++ b/include/scsi/scsi_cmnd.h
@@ -0,0 +1,359 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _SCSI_SCSI_CMND_H
+#define _SCSI_SCSI_CMND_H
+
+#include <linux/dma-mapping.h>
+#include <linux/blkdev.h>
+#include <linux/t10-pi.h>
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <linux/scatterlist.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_request.h>
+
+struct Scsi_Host;
+struct scsi_driver;
+
+/*
+ * MAX_COMMAND_SIZE is:
+ * The longest fixed-length SCSI CDB as per the SCSI standard.
+ * fixed-length means: commands that their size can be determined
+ * by their opcode and the CDB does not carry a length specifier, (unlike
+ * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
+ * true and the SCSI standard also defines extended commands and
+ * vendor specific commands that can be bigger than 16 bytes. The kernel
+ * will support these using the same infrastructure used for VARLEN CDB's.
+ * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml
+ * supports without specifying a cmd_len by ULD's
+ */
+#define MAX_COMMAND_SIZE 16
+#if (MAX_COMMAND_SIZE > BLK_MAX_CDB)
+# error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
+#endif
+
+struct scsi_data_buffer {
+	struct sg_table table;
+	unsigned length;
+	int resid;
+};
+
+/* embedded in scsi_cmnd */
+struct scsi_pointer {
+	char *ptr;		/* data pointer */
+	int this_residual;	/* left in this buffer */
+	struct scatterlist *buffer;	/* which buffer */
+	int buffers_residual;	/* how many buffers left */
+
+        dma_addr_t dma_handle;
+
+	volatile int Status;
+	volatile int Message;
+	volatile int have_data_in;
+	volatile int sent_command;
+	volatile int phase;
+};
+
+/* for scmd->flags */
+#define SCMD_TAGGED		(1 << 0)
+#define SCMD_UNCHECKED_ISA_DMA	(1 << 1)
+#define SCMD_INITIALIZED	(1 << 2)
+/* flags preserved across unprep / reprep */
+#define SCMD_PRESERVED_FLAGS	(SCMD_UNCHECKED_ISA_DMA | SCMD_INITIALIZED)
+
+struct scsi_cmnd {
+	struct scsi_request req;
+	struct scsi_device *device;
+	struct list_head list;  /* scsi_cmnd participates in queue lists */
+	struct list_head eh_entry; /* entry for the host eh_cmd_q */
+	struct delayed_work abort_work;
+
+	struct rcu_head rcu;
+
+	int eh_eflags;		/* Used by error handlr */
+
+	/*
+	 * A SCSI Command is assigned a nonzero serial_number before passed
+	 * to the driver's queue command function.  The serial_number is
+	 * cleared when scsi_done is entered indicating that the command
+	 * has been completed.  It is a bug for LLDDs to use this number
+	 * for purposes other than printk (and even that is only useful
+	 * for debugging).
+	 */
+	unsigned long serial_number;
+
+	/*
+	 * This is set to jiffies as it was when the command was first
+	 * allocated.  It is used to time how long the command has
+	 * been outstanding
+	 */
+	unsigned long jiffies_at_alloc;
+
+	int retries;
+	int allowed;
+
+	unsigned char prot_op;
+	unsigned char prot_type;
+	unsigned char prot_flags;
+
+	unsigned short cmd_len;
+	enum dma_data_direction sc_data_direction;
+
+	/* These elements define the operation we are about to perform */
+	unsigned char *cmnd;
+
+
+	/* These elements define the operation we ultimately want to perform */
+	struct scsi_data_buffer sdb;
+	struct scsi_data_buffer *prot_sdb;
+
+	unsigned underflow;	/* Return error if less than
+				   this amount is transferred */
+
+	unsigned transfersize;	/* How much we are guaranteed to
+				   transfer with each SCSI transfer
+				   (ie, between disconnect / 
+				   reconnects.   Probably == sector
+				   size */
+
+	struct request *request;	/* The command we are
+				   	   working on */
+
+	unsigned char *sense_buffer;
+				/* obtained by REQUEST SENSE when
+				 * CHECK CONDITION is received on original
+				 * command (auto-sense). Length must be
+				 * SCSI_SENSE_BUFFERSIZE bytes. */
+
+	/* Low-level done function - can be used by low-level driver to point
+	 *        to completion function.  Not used by mid/upper level code. */
+	void (*scsi_done) (struct scsi_cmnd *);
+
+	/*
+	 * The following fields can be written to by the host specific code. 
+	 * Everything else should be left alone. 
+	 */
+	struct scsi_pointer SCp;	/* Scratchpad used by some host adapters */
+
+	unsigned char *host_scribble;	/* The host adapter is allowed to
+					 * call scsi_malloc and get some memory
+					 * and hang it here.  The host adapter
+					 * is also expected to call scsi_free
+					 * to release this memory.  (The memory
+					 * obtained by scsi_malloc is guaranteed
+					 * to be at an address < 16Mb). */
+
+	int result;		/* Status code from lower level driver */
+	int flags;		/* Command flags */
+
+	unsigned char tag;	/* SCSI-II queued command tag */
+};
+
+/*
+ * Return the driver private allocation behind the command.
+ * Only works if cmd_size is set in the host template.
+ */
+static inline void *scsi_cmd_priv(struct scsi_cmnd *cmd)
+{
+	return cmd + 1;
+}
+
+/* make sure not to use it with passthrough commands */
+static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd)
+{
+	return *(struct scsi_driver **)cmd->request->rq_disk->private_data;
+}
+
+extern void scsi_put_command(struct scsi_cmnd *);
+extern void scsi_finish_command(struct scsi_cmnd *cmd);
+
+extern void *scsi_kmap_atomic_sg(struct scatterlist *sg, int sg_count,
+				 size_t *offset, size_t *len);
+extern void scsi_kunmap_atomic_sg(void *virt);
+
+extern int scsi_init_io(struct scsi_cmnd *cmd);
+
+#ifdef CONFIG_SCSI_DMA
+extern int scsi_dma_map(struct scsi_cmnd *cmd);
+extern void scsi_dma_unmap(struct scsi_cmnd *cmd);
+#else /* !CONFIG_SCSI_DMA */
+static inline int scsi_dma_map(struct scsi_cmnd *cmd) { return -ENOSYS; }
+static inline void scsi_dma_unmap(struct scsi_cmnd *cmd) { }
+#endif /* !CONFIG_SCSI_DMA */
+
+static inline unsigned scsi_sg_count(struct scsi_cmnd *cmd)
+{
+	return cmd->sdb.table.nents;
+}
+
+static inline struct scatterlist *scsi_sglist(struct scsi_cmnd *cmd)
+{
+	return cmd->sdb.table.sgl;
+}
+
+static inline unsigned scsi_bufflen(struct scsi_cmnd *cmd)
+{
+	return cmd->sdb.length;
+}
+
+static inline void scsi_set_resid(struct scsi_cmnd *cmd, int resid)
+{
+	cmd->sdb.resid = resid;
+}
+
+static inline int scsi_get_resid(struct scsi_cmnd *cmd)
+{
+	return cmd->sdb.resid;
+}
+
+#define scsi_for_each_sg(cmd, sg, nseg, __i)			\
+	for_each_sg(scsi_sglist(cmd), sg, nseg, __i)
+
+static inline int scsi_bidi_cmnd(struct scsi_cmnd *cmd)
+{
+	return blk_bidi_rq(cmd->request) &&
+		(cmd->request->next_rq->special != NULL);
+}
+
+static inline struct scsi_data_buffer *scsi_in(struct scsi_cmnd *cmd)
+{
+	return scsi_bidi_cmnd(cmd) ?
+		cmd->request->next_rq->special : &cmd->sdb;
+}
+
+static inline struct scsi_data_buffer *scsi_out(struct scsi_cmnd *cmd)
+{
+	return &cmd->sdb;
+}
+
+static inline int scsi_sg_copy_from_buffer(struct scsi_cmnd *cmd,
+					   void *buf, int buflen)
+{
+	return sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
+				   buf, buflen);
+}
+
+static inline int scsi_sg_copy_to_buffer(struct scsi_cmnd *cmd,
+					 void *buf, int buflen)
+{
+	return sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
+				 buf, buflen);
+}
+
+/*
+ * The operations below are hints that tell the controller driver how
+ * to handle I/Os with DIF or similar types of protection information.
+ */
+enum scsi_prot_operations {
+	/* Normal I/O */
+	SCSI_PROT_NORMAL = 0,
+
+	/* OS-HBA: Protected, HBA-Target: Unprotected */
+	SCSI_PROT_READ_INSERT,
+	SCSI_PROT_WRITE_STRIP,
+
+	/* OS-HBA: Unprotected, HBA-Target: Protected */
+	SCSI_PROT_READ_STRIP,
+	SCSI_PROT_WRITE_INSERT,
+
+	/* OS-HBA: Protected, HBA-Target: Protected */
+	SCSI_PROT_READ_PASS,
+	SCSI_PROT_WRITE_PASS,
+};
+
+static inline void scsi_set_prot_op(struct scsi_cmnd *scmd, unsigned char op)
+{
+	scmd->prot_op = op;
+}
+
+static inline unsigned char scsi_get_prot_op(struct scsi_cmnd *scmd)
+{
+	return scmd->prot_op;
+}
+
+enum scsi_prot_flags {
+	SCSI_PROT_TRANSFER_PI		= 1 << 0,
+	SCSI_PROT_GUARD_CHECK		= 1 << 1,
+	SCSI_PROT_REF_CHECK		= 1 << 2,
+	SCSI_PROT_REF_INCREMENT		= 1 << 3,
+	SCSI_PROT_IP_CHECKSUM		= 1 << 4,
+};
+
+/*
+ * The controller usually does not know anything about the target it
+ * is communicating with.  However, when DIX is enabled the controller
+ * must be know target type so it can verify the protection
+ * information passed along with the I/O.
+ */
+enum scsi_prot_target_type {
+	SCSI_PROT_DIF_TYPE0 = 0,
+	SCSI_PROT_DIF_TYPE1,
+	SCSI_PROT_DIF_TYPE2,
+	SCSI_PROT_DIF_TYPE3,
+};
+
+static inline void scsi_set_prot_type(struct scsi_cmnd *scmd, unsigned char type)
+{
+	scmd->prot_type = type;
+}
+
+static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd)
+{
+	return scmd->prot_type;
+}
+
+static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd)
+{
+	return blk_rq_pos(scmd->request);
+}
+
+static inline unsigned int scsi_prot_interval(struct scsi_cmnd *scmd)
+{
+	return scmd->device->sector_size;
+}
+
+static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd)
+{
+	return cmd->prot_sdb ? cmd->prot_sdb->table.nents : 0;
+}
+
+static inline struct scatterlist *scsi_prot_sglist(struct scsi_cmnd *cmd)
+{
+	return cmd->prot_sdb ? cmd->prot_sdb->table.sgl : NULL;
+}
+
+static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd)
+{
+	return cmd->prot_sdb;
+}
+
+#define scsi_for_each_prot_sg(cmd, sg, nseg, __i)		\
+	for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i)
+
+static inline void set_msg_byte(struct scsi_cmnd *cmd, char status)
+{
+	cmd->result = (cmd->result & 0xffff00ff) | (status << 8);
+}
+
+static inline void set_host_byte(struct scsi_cmnd *cmd, char status)
+{
+	cmd->result = (cmd->result & 0xff00ffff) | (status << 16);
+}
+
+static inline void set_driver_byte(struct scsi_cmnd *cmd, char status)
+{
+	cmd->result = (cmd->result & 0x00ffffff) | (status << 24);
+}
+
+static inline unsigned scsi_transfer_length(struct scsi_cmnd *scmd)
+{
+	unsigned int xfer_len = scsi_out(scmd)->length;
+	unsigned int prot_interval = scsi_prot_interval(scmd);
+
+	if (scmd->prot_flags & SCSI_PROT_TRANSFER_PI)
+		xfer_len += (xfer_len >> ilog2(prot_interval)) * 8;
+
+	return xfer_len;
+}
+
+#endif /* _SCSI_SCSI_CMND_H */
diff --git a/include/scsi/scsi_common.h b/include/scsi/scsi_common.h
new file mode 100644
index 000000000..5b567b43e
--- /dev/null
+++ b/include/scsi/scsi_common.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Functions used by both the SCSI initiator code and the SCSI target code.
+ */
+
+#ifndef _SCSI_COMMON_H_
+#define _SCSI_COMMON_H_
+
+#include <linux/types.h>
+#include <scsi/scsi_proto.h>
+
+static inline unsigned
+scsi_varlen_cdb_length(const void *hdr)
+{
+	return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8;
+}
+
+extern const unsigned char scsi_command_size_tbl[8];
+#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7]
+
+static inline unsigned
+scsi_command_size(const unsigned char *cmnd)
+{
+	return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
+		scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
+}
+
+static inline unsigned char
+scsi_command_control(const unsigned char *cmnd)
+{
+	return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
+		cmnd[1] : cmnd[COMMAND_SIZE(cmnd[0]) - 1];
+}
+
+/* Returns a human-readable name for the device */
+extern const char *scsi_device_type(unsigned type);
+
+extern void int_to_scsilun(u64, struct scsi_lun *);
+extern u64 scsilun_to_int(struct scsi_lun *);
+
+/*
+ * This is a slightly modified SCSI sense "descriptor" format header.
+ * The addition is to allow the 0x70 and 0x71 response codes. The idea
+ * is to place the salient data from either "fixed" or "descriptor" sense
+ * format into one structure to ease application processing.
+ *
+ * The original sense buffer should be kept around for those cases
+ * in which more information is required (e.g. the LBA of a MEDIUM ERROR).
+ */
+struct scsi_sense_hdr {		/* See SPC-3 section 4.5 */
+	u8 response_code;	/* permit: 0x0, 0x70, 0x71, 0x72, 0x73 */
+	u8 sense_key;
+	u8 asc;
+	u8 ascq;
+	u8 byte4;
+	u8 byte5;
+	u8 byte6;
+	u8 additional_length;	/* always 0 for fixed sense format */
+};
+
+static inline bool scsi_sense_valid(const struct scsi_sense_hdr *sshdr)
+{
+	if (!sshdr)
+		return false;
+
+	return (sshdr->response_code & 0x70) == 0x70;
+}
+
+extern bool scsi_normalize_sense(const u8 *sense_buffer, int sb_len,
+				 struct scsi_sense_hdr *sshdr);
+
+extern void scsi_build_sense_buffer(int desc, u8 *buf, u8 key, u8 asc, u8 ascq);
+int scsi_set_sense_information(u8 *buf, int buf_len, u64 info);
+int scsi_set_sense_field_pointer(u8 *buf, int buf_len, u16 fp, u8 bp, bool cd);
+extern const u8 * scsi_sense_desc_find(const u8 * sense_buffer, int sb_len,
+				       int desc_type);
+
+#endif /* _SCSI_COMMON_H_ */
diff --git a/include/scsi/scsi_dbg.h b/include/scsi/scsi_dbg.h
new file mode 100644
index 000000000..7b196d234
--- /dev/null
+++ b/include/scsi/scsi_dbg.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _SCSI_SCSI_DBG_H
+#define _SCSI_SCSI_DBG_H
+
+struct scsi_cmnd;
+struct scsi_device;
+struct scsi_sense_hdr;
+
+extern void scsi_print_command(struct scsi_cmnd *);
+extern size_t __scsi_format_command(char *, size_t,
+				   const unsigned char *, size_t);
+extern void scsi_print_sense_hdr(const struct scsi_device *, const char *,
+				 const struct scsi_sense_hdr *);
+extern void scsi_print_sense(const struct scsi_cmnd *);
+extern void __scsi_print_sense(const struct scsi_device *, const char *name,
+			       const unsigned char *sense_buffer,
+			       int sense_len);
+extern void scsi_print_result(const struct scsi_cmnd *, const char *, int);
+
+#ifdef CONFIG_SCSI_CONSTANTS
+extern bool scsi_opcode_sa_name(int, int, const char **, const char **);
+extern const char *scsi_sense_key_string(unsigned char);
+extern const char *scsi_extd_sense_format(unsigned char, unsigned char,
+					  const char **);
+extern const char *scsi_mlreturn_string(int);
+extern const char *scsi_hostbyte_string(int);
+extern const char *scsi_driverbyte_string(int);
+#else
+static inline bool
+scsi_opcode_sa_name(int cmd, int sa,
+		    const char **cdb_name, const char **sa_name)
+{
+	*cdb_name = NULL;
+	switch (cmd) {
+	case VARIABLE_LENGTH_CMD:
+	case MAINTENANCE_IN:
+	case MAINTENANCE_OUT:
+	case PERSISTENT_RESERVE_IN:
+	case PERSISTENT_RESERVE_OUT:
+	case SERVICE_ACTION_IN_12:
+	case SERVICE_ACTION_OUT_12:
+	case SERVICE_ACTION_BIDIRECTIONAL:
+	case SERVICE_ACTION_IN_16:
+	case SERVICE_ACTION_OUT_16:
+	case EXTENDED_COPY:
+	case RECEIVE_COPY_RESULTS:
+		*sa_name = NULL;
+		return true;
+	default:
+		return false;
+	}
+}
+
+static inline const char *
+scsi_sense_key_string(unsigned char key)
+{
+	return NULL;
+}
+
+static inline const char *
+scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt)
+{
+	*fmt = NULL;
+	return NULL;
+}
+
+static inline const char *
+scsi_mlreturn_string(int result)
+{
+	return NULL;
+}
+
+static inline const char *
+scsi_hostbyte_string(int result)
+{
+	return NULL;
+}
+
+static inline const char *
+scsi_driverbyte_string(int result)
+{
+	return NULL;
+}
+
+#endif
+
+#endif /* _SCSI_SCSI_DBG_H */
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
new file mode 100644
index 000000000..202f4d6a4
--- /dev/null
+++ b/include/scsi/scsi_device.h
@@ -0,0 +1,587 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _SCSI_SCSI_DEVICE_H
+#define _SCSI_SCSI_DEVICE_H
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi.h>
+#include <linux/atomic.h>
+
+struct device;
+struct request_queue;
+struct scsi_cmnd;
+struct scsi_lun;
+struct scsi_sense_hdr;
+
+typedef __u64 __bitwise blist_flags_t;
+
+#define SCSI_SENSE_BUFFERSIZE	96
+
+struct scsi_mode_data {
+	__u32	length;
+	__u16	block_descriptor_length;
+	__u8	medium_type;
+	__u8	device_specific;
+	__u8	header_length;
+	__u8	longlba:1;
+};
+
+/*
+ * sdev state: If you alter this, you also need to alter scsi_sysfs.c
+ * (for the ascii descriptions) and the state model enforcer:
+ * scsi_lib:scsi_device_set_state().
+ */
+enum scsi_device_state {
+	SDEV_CREATED = 1,	/* device created but not added to sysfs
+				 * Only internal commands allowed (for inq) */
+	SDEV_RUNNING,		/* device properly configured
+				 * All commands allowed */
+	SDEV_CANCEL,		/* beginning to delete device
+				 * Only error handler commands allowed */
+	SDEV_DEL,		/* device deleted 
+				 * no commands allowed */
+	SDEV_QUIESCE,		/* Device quiescent.  No block commands
+				 * will be accepted, only specials (which
+				 * originate in the mid-layer) */
+	SDEV_OFFLINE,		/* Device offlined (by error handling or
+				 * user request */
+	SDEV_TRANSPORT_OFFLINE,	/* Offlined by transport class error handler */
+	SDEV_BLOCK,		/* Device blocked by scsi lld.  No
+				 * scsi commands from user or midlayer
+				 * should be issued to the scsi
+				 * lld. */
+	SDEV_CREATED_BLOCK,	/* same as above but for created devices */
+};
+
+enum scsi_scan_mode {
+	SCSI_SCAN_INITIAL = 0,
+	SCSI_SCAN_RESCAN,
+	SCSI_SCAN_MANUAL,
+};
+
+enum scsi_device_event {
+	SDEV_EVT_MEDIA_CHANGE	= 1,	/* media has changed */
+	SDEV_EVT_INQUIRY_CHANGE_REPORTED,		/* 3F 03  UA reported */
+	SDEV_EVT_CAPACITY_CHANGE_REPORTED,		/* 2A 09  UA reported */
+	SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED,	/* 38 07  UA reported */
+	SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED,	/* 2A 01  UA reported */
+	SDEV_EVT_LUN_CHANGE_REPORTED,			/* 3F 0E  UA reported */
+	SDEV_EVT_ALUA_STATE_CHANGE_REPORTED,		/* 2A 06  UA reported */
+	SDEV_EVT_POWER_ON_RESET_OCCURRED,		/* 29 00  UA reported */
+
+	SDEV_EVT_FIRST		= SDEV_EVT_MEDIA_CHANGE,
+	SDEV_EVT_LAST		= SDEV_EVT_POWER_ON_RESET_OCCURRED,
+
+	SDEV_EVT_MAXBITS	= SDEV_EVT_LAST + 1
+};
+
+struct scsi_event {
+	enum scsi_device_event	evt_type;
+	struct list_head	node;
+
+	/* put union of data structures, for non-simple event types,
+	 * here
+	 */
+};
+
+/**
+ * struct scsi_vpd - SCSI Vital Product Data
+ * @rcu: For kfree_rcu().
+ * @len: Length in bytes of @data.
+ * @data: VPD data as defined in various T10 SCSI standard documents.
+ */
+struct scsi_vpd {
+	struct rcu_head	rcu;
+	int		len;
+	unsigned char	data[];
+};
+
+struct scsi_device {
+	struct Scsi_Host *host;
+	struct request_queue *request_queue;
+
+	/* the next two are protected by the host->host_lock */
+	struct list_head    siblings;   /* list of all devices on this host */
+	struct list_head    same_target_siblings; /* just the devices sharing same target id */
+
+	atomic_t device_busy;		/* commands actually active on LLDD */
+	atomic_t device_blocked;	/* Device returned QUEUE_FULL. */
+
+	spinlock_t list_lock;
+	struct list_head cmd_list;	/* queue of in use SCSI Command structures */
+	struct list_head starved_entry;
+	unsigned short queue_depth;	/* How deep of a queue we want */
+	unsigned short max_queue_depth;	/* max queue depth */
+	unsigned short last_queue_full_depth; /* These two are used by */
+	unsigned short last_queue_full_count; /* scsi_track_queue_full() */
+	unsigned long last_queue_full_time;	/* last queue full time */
+	unsigned long queue_ramp_up_period;	/* ramp up period in jiffies */
+#define SCSI_DEFAULT_RAMP_UP_PERIOD	(120 * HZ)
+
+	unsigned long last_queue_ramp_up;	/* last queue ramp up time */
+
+	unsigned int id, channel;
+	u64 lun;
+	unsigned int manufacturer;	/* Manufacturer of device, for using 
+					 * vendor-specific cmd's */
+	unsigned sector_size;	/* size in bytes */
+
+	void *hostdata;		/* available to low-level driver */
+	unsigned char type;
+	char scsi_level;
+	char inq_periph_qual;	/* PQ from INQUIRY data */	
+	struct mutex inquiry_mutex;
+	unsigned char inquiry_len;	/* valid bytes in 'inquiry' */
+	unsigned char * inquiry;	/* INQUIRY response data */
+	const char * vendor;		/* [back_compat] point into 'inquiry' ... */
+	const char * model;		/* ... after scan; point to static string */
+	const char * rev;		/* ... "nullnullnullnull" before scan */
+
+#define SCSI_VPD_PG_LEN                255
+	struct scsi_vpd __rcu *vpd_pg83;
+	struct scsi_vpd __rcu *vpd_pg80;
+	unsigned char current_tag;	/* current tag */
+	struct scsi_target      *sdev_target;   /* used only for single_lun */
+
+	blist_flags_t		sdev_bflags; /* black/white flags as also found in
+				 * scsi_devinfo.[hc]. For now used only to
+				 * pass settings from slave_alloc to scsi
+				 * core. */
+	unsigned int eh_timeout; /* Error handling timeout */
+	unsigned removable:1;
+	unsigned changed:1;	/* Data invalid due to media change */
+	unsigned busy:1;	/* Used to prevent races */
+	unsigned lockable:1;	/* Able to prevent media removal */
+	unsigned locked:1;      /* Media removal disabled */
+	unsigned borken:1;	/* Tell the Seagate driver to be 
+				 * painfully slow on this device */
+	unsigned disconnect:1;	/* can disconnect */
+	unsigned soft_reset:1;	/* Uses soft reset option */
+	unsigned sdtr:1;	/* Device supports SDTR messages */
+	unsigned wdtr:1;	/* Device supports WDTR messages */
+	unsigned ppr:1;		/* Device supports PPR messages */
+	unsigned tagged_supported:1;	/* Supports SCSI-II tagged queuing */
+	unsigned simple_tags:1;	/* simple queue tag messages are enabled */
+	unsigned was_reset:1;	/* There was a bus reset on the bus for 
+				 * this device */
+	unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
+				     * because we did a bus reset. */
+	unsigned use_10_for_rw:1; /* first try 10-byte read / write */
+	unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
+	unsigned no_report_opcodes:1;	/* no REPORT SUPPORTED OPERATION CODES */
+	unsigned no_write_same:1;	/* no WRITE SAME command */
+	unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */
+	unsigned skip_ms_page_8:1;	/* do not use MODE SENSE page 0x08 */
+	unsigned skip_ms_page_3f:1;	/* do not use MODE SENSE page 0x3f */
+	unsigned skip_vpd_pages:1;	/* do not read VPD pages */
+	unsigned try_vpd_pages:1;	/* attempt to read VPD pages */
+	unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
+	unsigned no_start_on_add:1;	/* do not issue start on add */
+	unsigned allow_restart:1; /* issue START_UNIT in error handler */
+	unsigned manage_start_stop:1;	/* Let HLD (sd) manage start/stop */
+	unsigned start_stop_pwr_cond:1;	/* Set power cond. in START_STOP_UNIT */
+	unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
+	unsigned select_no_atn:1;
+	unsigned fix_capacity:1;	/* READ_CAPACITY is too high by 1 */
+	unsigned guess_capacity:1;	/* READ_CAPACITY might be too high by 1 */
+	unsigned retry_hwerror:1;	/* Retry HARDWARE_ERROR */
+	unsigned last_sector_bug:1;	/* do not use multisector accesses on
+					   SD_LAST_BUGGY_SECTORS */
+	unsigned no_read_disc_info:1;	/* Avoid READ_DISC_INFO cmds */
+	unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
+	unsigned try_rc_10_first:1;	/* Try READ_CAPACACITY_10 first */
+	unsigned security_supported:1;	/* Supports Security Protocols */
+	unsigned is_visible:1;	/* is the device visible in sysfs */
+	unsigned wce_default_on:1;	/* Cache is ON by default */
+	unsigned no_dif:1;	/* T10 PI (DIF) should be disabled */
+	unsigned broken_fua:1;		/* Don't set FUA bit */
+	unsigned lun_in_cdb:1;		/* Store LUN bits in CDB[1] */
+	unsigned unmap_limit_for_ws:1;	/* Use the UNMAP limit for WRITE SAME */
+
+	atomic_t disk_events_disable_depth; /* disable depth for disk events */
+
+	DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
+	DECLARE_BITMAP(pending_events, SDEV_EVT_MAXBITS); /* pending events */
+	struct list_head event_list;	/* asserted events */
+	struct work_struct event_work;
+
+	unsigned int max_device_blocked; /* what device_blocked counts down from  */
+#define SCSI_DEFAULT_DEVICE_BLOCKED	3
+
+	atomic_t iorequest_cnt;
+	atomic_t iodone_cnt;
+	atomic_t ioerr_cnt;
+
+	struct device		sdev_gendev,
+				sdev_dev;
+
+	struct execute_work	ew; /* used to get process context on put */
+	struct work_struct	requeue_work;
+
+	struct scsi_device_handler *handler;
+	void			*handler_data;
+
+	unsigned char		access_state;
+	struct mutex		state_mutex;
+	enum scsi_device_state sdev_state;
+	struct task_struct	*quiesced_by;
+	unsigned long		sdev_data[0];
+} __attribute__((aligned(sizeof(unsigned long))));
+
+#define	to_scsi_device(d)	\
+	container_of(d, struct scsi_device, sdev_gendev)
+#define	class_to_sdev(d)	\
+	container_of(d, struct scsi_device, sdev_dev)
+#define transport_class_to_sdev(class_dev) \
+	to_scsi_device(class_dev->parent)
+
+#define sdev_dbg(sdev, fmt, a...) \
+	dev_dbg(&(sdev)->sdev_gendev, fmt, ##a)
+
+/*
+ * like scmd_printk, but the device name is passed in
+ * as a string pointer
+ */
+__printf(4, 5) void
+sdev_prefix_printk(const char *, const struct scsi_device *, const char *,
+		const char *, ...);
+
+#define sdev_printk(l, sdev, fmt, a...)				\
+	sdev_prefix_printk(l, sdev, NULL, fmt, ##a)
+
+__printf(3, 4) void
+scmd_printk(const char *, const struct scsi_cmnd *, const char *, ...);
+
+#define scmd_dbg(scmd, fmt, a...)					   \
+	do {								   \
+		if ((scmd)->request->rq_disk)				   \
+			sdev_dbg((scmd)->device, "[%s] " fmt,		   \
+				 (scmd)->request->rq_disk->disk_name, ##a);\
+		else							   \
+			sdev_dbg((scmd)->device, fmt, ##a);		   \
+	} while (0)
+
+enum scsi_target_state {
+	STARGET_CREATED = 1,
+	STARGET_RUNNING,
+	STARGET_REMOVE,
+	STARGET_CREATED_REMOVE,
+	STARGET_DEL,
+};
+
+/*
+ * scsi_target: representation of a scsi target, for now, this is only
+ * used for single_lun devices. If no one has active IO to the target,
+ * starget_sdev_user is NULL, else it points to the active sdev.
+ */
+struct scsi_target {
+	struct scsi_device	*starget_sdev_user;
+	struct list_head	siblings;
+	struct list_head	devices;
+	struct device		dev;
+	struct kref		reap_ref; /* last put renders target invisible */
+	unsigned int		channel;
+	unsigned int		id; /* target id ... replace
+				     * scsi_device.id eventually */
+	unsigned int		create:1; /* signal that it needs to be added */
+	unsigned int		single_lun:1;	/* Indicates we should only
+						 * allow I/O to one of the luns
+						 * for the device at a time. */
+	unsigned int		pdt_1f_for_no_lun:1;	/* PDT = 0x1f
+						 * means no lun present. */
+	unsigned int		no_report_luns:1;	/* Don't use
+						 * REPORT LUNS for scanning. */
+	unsigned int		expecting_lun_change:1;	/* A device has reported
+						 * a 3F/0E UA, other devices on
+						 * the same target will also. */
+	/* commands actually active on LLD. */
+	atomic_t		target_busy;
+	atomic_t		target_blocked;
+
+	/*
+	 * LLDs should set this in the slave_alloc host template callout.
+	 * If set to zero then there is not limit.
+	 */
+	unsigned int		can_queue;
+	unsigned int		max_target_blocked;
+#define SCSI_DEFAULT_TARGET_BLOCKED	3
+
+	char			scsi_level;
+	enum scsi_target_state	state;
+	void 			*hostdata; /* available to low-level driver */
+	unsigned long		starget_data[0]; /* for the transport */
+	/* starget_data must be the last element!!!! */
+} __attribute__((aligned(sizeof(unsigned long))));
+
+#define to_scsi_target(d)	container_of(d, struct scsi_target, dev)
+static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
+{
+	return to_scsi_target(sdev->sdev_gendev.parent);
+}
+#define transport_class_to_starget(class_dev) \
+	to_scsi_target(class_dev->parent)
+
+#define starget_printk(prefix, starget, fmt, a...)	\
+	dev_printk(prefix, &(starget)->dev, fmt, ##a)
+
+extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
+		uint, uint, u64, void *hostdata);
+extern int scsi_add_device(struct Scsi_Host *host, uint channel,
+			   uint target, u64 lun);
+extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
+extern void scsi_remove_device(struct scsi_device *);
+extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
+void scsi_attach_vpd(struct scsi_device *sdev);
+
+extern struct scsi_device *scsi_device_from_queue(struct request_queue *q);
+extern int __must_check scsi_device_get(struct scsi_device *);
+extern void scsi_device_put(struct scsi_device *);
+extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
+					      uint, uint, u64);
+extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
+						uint, uint, u64);
+extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
+							u64);
+extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
+							  u64);
+extern void starget_for_each_device(struct scsi_target *, void *,
+		     void (*fn)(struct scsi_device *, void *));
+extern void __starget_for_each_device(struct scsi_target *, void *,
+				      void (*fn)(struct scsi_device *,
+						 void *));
+
+/* only exposed to implement shost_for_each_device */
+extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
+						  struct scsi_device *);
+
+/**
+ * shost_for_each_device - iterate over all devices of a host
+ * @sdev: the &struct scsi_device to use as a cursor
+ * @shost: the &struct scsi_host to iterate over
+ *
+ * Iterator that returns each device attached to @shost.  This loop
+ * takes a reference on each device and releases it at the end.  If
+ * you break out of the loop, you must call scsi_device_put(sdev).
+ */
+#define shost_for_each_device(sdev, shost) \
+	for ((sdev) = __scsi_iterate_devices((shost), NULL); \
+	     (sdev); \
+	     (sdev) = __scsi_iterate_devices((shost), (sdev)))
+
+/**
+ * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
+ * @sdev: the &struct scsi_device to use as a cursor
+ * @shost: the &struct scsi_host to iterate over
+ *
+ * Iterator that returns each device attached to @shost.  It does _not_
+ * take a reference on the scsi_device, so the whole loop must be
+ * protected by shost->host_lock.
+ *
+ * Note: The only reason to use this is because you need to access the
+ * device list in interrupt context.  Otherwise you really want to use
+ * shost_for_each_device instead.
+ */
+#define __shost_for_each_device(sdev, shost) \
+	list_for_each_entry((sdev), &((shost)->__devices), siblings)
+
+extern int scsi_change_queue_depth(struct scsi_device *, int);
+extern int scsi_track_queue_full(struct scsi_device *, int);
+
+extern int scsi_set_medium_removal(struct scsi_device *, char);
+
+extern int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
+			   unsigned char *buffer, int len, int timeout,
+			   int retries, struct scsi_mode_data *data,
+			   struct scsi_sense_hdr *);
+extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
+			    int modepage, unsigned char *buffer, int len,
+			    int timeout, int retries,
+			    struct scsi_mode_data *data,
+			    struct scsi_sense_hdr *);
+extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
+				int retries, struct scsi_sense_hdr *sshdr);
+extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
+			     int buf_len);
+extern int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
+			      unsigned int len, unsigned char opcode);
+extern int scsi_device_set_state(struct scsi_device *sdev,
+				 enum scsi_device_state state);
+extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
+					  gfp_t gfpflags);
+extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt);
+extern void sdev_evt_send_simple(struct scsi_device *sdev,
+			  enum scsi_device_event evt_type, gfp_t gfpflags);
+extern int scsi_device_quiesce(struct scsi_device *sdev);
+extern void scsi_device_resume(struct scsi_device *sdev);
+extern void scsi_target_quiesce(struct scsi_target *);
+extern void scsi_target_resume(struct scsi_target *);
+extern void scsi_scan_target(struct device *parent, unsigned int channel,
+			     unsigned int id, u64 lun,
+			     enum scsi_scan_mode rescan);
+extern void scsi_target_reap(struct scsi_target *);
+extern void scsi_target_block(struct device *);
+extern void scsi_target_unblock(struct device *, enum scsi_device_state);
+extern void scsi_remove_target(struct device *);
+extern const char *scsi_device_state_name(enum scsi_device_state);
+extern int scsi_is_sdev_device(const struct device *);
+extern int scsi_is_target_device(const struct device *);
+extern void scsi_sanitize_inquiry_string(unsigned char *s, int len);
+extern int __scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
+			int data_direction, void *buffer, unsigned bufflen,
+			unsigned char *sense, struct scsi_sense_hdr *sshdr,
+			int timeout, int retries, u64 flags,
+			req_flags_t rq_flags, int *resid);
+/* Make sure any sense buffer is the correct size. */
+#define scsi_execute(sdev, cmd, data_direction, buffer, bufflen, sense,	\
+		     sshdr, timeout, retries, flags, rq_flags, resid)	\
+({									\
+	BUILD_BUG_ON((sense) != NULL &&					\
+		     sizeof(sense) != SCSI_SENSE_BUFFERSIZE);		\
+	__scsi_execute(sdev, cmd, data_direction, buffer, bufflen,	\
+		       sense, sshdr, timeout, retries, flags, rq_flags,	\
+		       resid);						\
+})
+static inline int scsi_execute_req(struct scsi_device *sdev,
+	const unsigned char *cmd, int data_direction, void *buffer,
+	unsigned bufflen, struct scsi_sense_hdr *sshdr, int timeout,
+	int retries, int *resid)
+{
+	return scsi_execute(sdev, cmd, data_direction, buffer,
+		bufflen, NULL, sshdr, timeout, retries,  0, 0, resid);
+}
+extern void sdev_disable_disk_events(struct scsi_device *sdev);
+extern void sdev_enable_disk_events(struct scsi_device *sdev);
+extern int scsi_vpd_lun_id(struct scsi_device *, char *, size_t);
+extern int scsi_vpd_tpg_id(struct scsi_device *, int *);
+
+#ifdef CONFIG_PM
+extern int scsi_autopm_get_device(struct scsi_device *);
+extern void scsi_autopm_put_device(struct scsi_device *);
+#else
+static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
+static inline void scsi_autopm_put_device(struct scsi_device *d) {}
+#endif /* CONFIG_PM */
+
+static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
+{
+	return device_reprobe(&sdev->sdev_gendev);
+}
+
+static inline unsigned int sdev_channel(struct scsi_device *sdev)
+{
+	return sdev->channel;
+}
+
+static inline unsigned int sdev_id(struct scsi_device *sdev)
+{
+	return sdev->id;
+}
+
+#define scmd_id(scmd) sdev_id((scmd)->device)
+#define scmd_channel(scmd) sdev_channel((scmd)->device)
+
+/*
+ * checks for positions of the SCSI state machine
+ */
+static inline int scsi_device_online(struct scsi_device *sdev)
+{
+	return (sdev->sdev_state != SDEV_OFFLINE &&
+		sdev->sdev_state != SDEV_TRANSPORT_OFFLINE &&
+		sdev->sdev_state != SDEV_DEL);
+}
+static inline int scsi_device_blocked(struct scsi_device *sdev)
+{
+	return sdev->sdev_state == SDEV_BLOCK ||
+		sdev->sdev_state == SDEV_CREATED_BLOCK;
+}
+static inline int scsi_device_created(struct scsi_device *sdev)
+{
+	return sdev->sdev_state == SDEV_CREATED ||
+		sdev->sdev_state == SDEV_CREATED_BLOCK;
+}
+
+int scsi_internal_device_block_nowait(struct scsi_device *sdev);
+int scsi_internal_device_unblock_nowait(struct scsi_device *sdev,
+					enum scsi_device_state new_state);
+
+/* accessor functions for the SCSI parameters */
+static inline int scsi_device_sync(struct scsi_device *sdev)
+{
+	return sdev->sdtr;
+}
+static inline int scsi_device_wide(struct scsi_device *sdev)
+{
+	return sdev->wdtr;
+}
+static inline int scsi_device_dt(struct scsi_device *sdev)
+{
+	return sdev->ppr;
+}
+static inline int scsi_device_dt_only(struct scsi_device *sdev)
+{
+	if (sdev->inquiry_len < 57)
+		return 0;
+	return (sdev->inquiry[56] & 0x0c) == 0x04;
+}
+static inline int scsi_device_ius(struct scsi_device *sdev)
+{
+	if (sdev->inquiry_len < 57)
+		return 0;
+	return sdev->inquiry[56] & 0x01;
+}
+static inline int scsi_device_qas(struct scsi_device *sdev)
+{
+	if (sdev->inquiry_len < 57)
+		return 0;
+	return sdev->inquiry[56] & 0x02;
+}
+static inline int scsi_device_enclosure(struct scsi_device *sdev)
+{
+	return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1;
+}
+
+static inline int scsi_device_protection(struct scsi_device *sdev)
+{
+	if (sdev->no_dif)
+		return 0;
+
+	return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
+}
+
+static inline int scsi_device_tpgs(struct scsi_device *sdev)
+{
+	return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0;
+}
+
+/**
+ * scsi_device_supports_vpd - test if a device supports VPD pages
+ * @sdev: the &struct scsi_device to test
+ *
+ * If the 'try_vpd_pages' flag is set it takes precedence.
+ * Otherwise we will assume VPD pages are supported if the
+ * SCSI level is at least SPC-3 and 'skip_vpd_pages' is not set.
+ */
+static inline int scsi_device_supports_vpd(struct scsi_device *sdev)
+{
+	/* Attempt VPD inquiry if the device blacklist explicitly calls
+	 * for it.
+	 */
+	if (sdev->try_vpd_pages)
+		return 1;
+	/*
+	 * Although VPD inquiries can go to SCSI-2 type devices,
+	 * some USB ones crash on receiving them, and the pages
+	 * we currently ask for are mandatory for SPC-2 and beyond
+	 */
+	if (sdev->scsi_level >= SCSI_SPC_2 && !sdev->skip_vpd_pages)
+		return 1;
+	return 0;
+}
+
+#define MODULE_ALIAS_SCSI_DEVICE(type) \
+	MODULE_ALIAS("scsi:t-" __stringify(type) "*")
+#define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
+
+#endif /* _SCSI_SCSI_DEVICE_H */
diff --git a/include/scsi/scsi_devinfo.h b/include/scsi/scsi_devinfo.h
new file mode 100644
index 000000000..3fdb322d4
--- /dev/null
+++ b/include/scsi/scsi_devinfo.h
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _SCSI_SCSI_DEVINFO_H
+#define _SCSI_SCSI_DEVINFO_H
+/*
+ * Flags for SCSI devices that need special treatment
+ */
+
+/* Only scan LUN 0 */
+#define BLIST_NOLUN		((__force blist_flags_t)(1ULL << 0))
+/* Known to have LUNs, force scanning.
+ * DEPRECATED: Use max_luns=N */
+#define BLIST_FORCELUN		((__force blist_flags_t)(1ULL << 1))
+/* Flag for broken handshaking */
+#define BLIST_BORKEN		((__force blist_flags_t)(1ULL << 2))
+/* unlock by special command */
+#define BLIST_KEY		((__force blist_flags_t)(1ULL << 3))
+/* Do not use LUNs in parallel */
+#define BLIST_SINGLELUN		((__force blist_flags_t)(1ULL << 4))
+/* Buggy Tagged Command Queuing */
+#define BLIST_NOTQ		((__force blist_flags_t)(1ULL << 5))
+/* Non consecutive LUN numbering */
+#define BLIST_SPARSELUN		((__force blist_flags_t)(1ULL << 6))
+/* Avoid LUNS >= 5 */
+#define BLIST_MAX5LUN		((__force blist_flags_t)(1ULL << 7))
+/* Treat as (removable) CD-ROM */
+#define BLIST_ISROM		((__force blist_flags_t)(1ULL << 8))
+/* LUNs past 7 on a SCSI-2 device */
+#define BLIST_LARGELUN		((__force blist_flags_t)(1ULL << 9))
+/* override additional length field */
+#define BLIST_INQUIRY_36	((__force blist_flags_t)(1ULL << 10))
+#define __BLIST_UNUSED_11	((__force blist_flags_t)(1ULL << 11))
+/* do not do automatic start on add */
+#define BLIST_NOSTARTONADD	((__force blist_flags_t)(1ULL << 12))
+#define __BLIST_UNUSED_13	((__force blist_flags_t)(1ULL << 13))
+#define __BLIST_UNUSED_14	((__force blist_flags_t)(1ULL << 14))
+#define __BLIST_UNUSED_15	((__force blist_flags_t)(1ULL << 15))
+#define __BLIST_UNUSED_16	((__force blist_flags_t)(1ULL << 16))
+/* try REPORT_LUNS even for SCSI-2 devs (if HBA supports more than 8 LUNs) */
+#define BLIST_REPORTLUN2	((__force blist_flags_t)(1ULL << 17))
+/* don't try REPORT_LUNS scan (SCSI-3 devs) */
+#define BLIST_NOREPORTLUN	((__force blist_flags_t)(1ULL << 18))
+/* don't use PREVENT-ALLOW commands */
+#define BLIST_NOT_LOCKABLE	((__force blist_flags_t)(1ULL << 19))
+/* device is actually for RAID config */
+#define BLIST_NO_ULD_ATTACH	((__force blist_flags_t)(1ULL << 20))
+/* select without ATN */
+#define BLIST_SELECT_NO_ATN	((__force blist_flags_t)(1ULL << 21))
+/* retry HARDWARE_ERROR */
+#define BLIST_RETRY_HWERROR	((__force blist_flags_t)(1ULL << 22))
+/* maximum 512 sector cdb length */
+#define BLIST_MAX_512		((__force blist_flags_t)(1ULL << 23))
+#define __BLIST_UNUSED_24	((__force blist_flags_t)(1ULL << 24))
+/* Disable T10 PI (DIF) */
+#define BLIST_NO_DIF		((__force blist_flags_t)(1ULL << 25))
+/* Ignore SBC-3 VPD pages */
+#define BLIST_SKIP_VPD_PAGES	((__force blist_flags_t)(1ULL << 26))
+#define __BLIST_UNUSED_27	((__force blist_flags_t)(1ULL << 27))
+/* Attempt to read VPD pages */
+#define BLIST_TRY_VPD_PAGES	((__force blist_flags_t)(1ULL << 28))
+/* don't try to issue RSOC */
+#define BLIST_NO_RSOC		((__force blist_flags_t)(1ULL << 29))
+/* maximum 1024 sector cdb length */
+#define BLIST_MAX_1024		((__force blist_flags_t)(1ULL << 30))
+/* Use UNMAP limit for WRITE SAME */
+#define BLIST_UNMAP_LIMIT_WS	((__force blist_flags_t)(1ULL << 31))
+/* Always retry ABORTED_COMMAND with Internal Target Failure */
+#define BLIST_RETRY_ITF		((__force blist_flags_t)(1ULL << 32))
+/* Always retry ABORTED_COMMAND with ASC 0xc1 */
+#define BLIST_RETRY_ASC_C1	((__force blist_flags_t)(1ULL << 33))
+
+#define __BLIST_LAST_USED BLIST_RETRY_ASC_C1
+
+#define __BLIST_HIGH_UNUSED (~(__BLIST_LAST_USED | \
+			       (__force blist_flags_t) \
+			       ((__force __u64)__BLIST_LAST_USED - 1ULL)))
+#define __BLIST_UNUSED_MASK (__BLIST_UNUSED_11 | \
+			     __BLIST_UNUSED_13 | \
+			     __BLIST_UNUSED_14 | \
+			     __BLIST_UNUSED_15 | \
+			     __BLIST_UNUSED_16 | \
+			     __BLIST_UNUSED_24 | \
+			     __BLIST_UNUSED_27 | \
+			     __BLIST_HIGH_UNUSED)
+
+#endif
diff --git a/include/scsi/scsi_dh.h b/include/scsi/scsi_dh.h
new file mode 100644
index 000000000..c7bba2b24
--- /dev/null
+++ b/include/scsi/scsi_dh.h
@@ -0,0 +1,102 @@
+/*
+ * Header file for SCSI device handler infrastruture.
+ *
+ * Modified version of patches posted by Mike Christie <michaelc@cs.wisc.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2007
+ *      Authors:
+ *               Chandra Seetharaman <sekharan@us.ibm.com>
+ *               Mike Anderson <andmike@linux.vnet.ibm.com>
+ */
+
+#include <scsi/scsi_device.h>
+
+enum {
+	SCSI_DH_OK = 0,
+	/*
+	 * device errors
+	 */
+	SCSI_DH_DEV_FAILED,	/* generic device error */
+	SCSI_DH_DEV_TEMP_BUSY,
+	SCSI_DH_DEV_UNSUPP,	/* device handler not supported */
+	SCSI_DH_DEVICE_MAX,	/* max device blkerr definition */
+
+	/*
+	 * transport errors
+	 */
+	SCSI_DH_NOTCONN = SCSI_DH_DEVICE_MAX + 1,
+	SCSI_DH_CONN_FAILURE,
+	SCSI_DH_TRANSPORT_MAX,	/* max transport blkerr definition */
+
+	/*
+	 * driver and generic errors
+	 */
+	SCSI_DH_IO = SCSI_DH_TRANSPORT_MAX + 1,	/* generic error */
+	SCSI_DH_INVALID_IO,
+	SCSI_DH_RETRY,		/* retry the req, but not immediately */
+	SCSI_DH_IMM_RETRY,	/* immediately retry the req */
+	SCSI_DH_TIMED_OUT,
+	SCSI_DH_RES_TEMP_UNAVAIL,
+	SCSI_DH_DEV_OFFLINED,
+	SCSI_DH_NOMEM,
+	SCSI_DH_NOSYS,
+	SCSI_DH_DRIVER_MAX,
+};
+
+typedef void (*activate_complete)(void *, int);
+struct scsi_device_handler {
+	/* Used by the infrastructure */
+	struct list_head list; /* list of scsi_device_handlers */
+
+	/* Filled by the hardware handler */
+	struct module *module;
+	const char *name;
+	int (*check_sense)(struct scsi_device *, struct scsi_sense_hdr *);
+	int (*attach)(struct scsi_device *);
+	void (*detach)(struct scsi_device *);
+	int (*activate)(struct scsi_device *, activate_complete, void *);
+	int (*prep_fn)(struct scsi_device *, struct request *);
+	int (*set_params)(struct scsi_device *, const char *);
+	void (*rescan)(struct scsi_device *);
+};
+
+#ifdef CONFIG_SCSI_DH
+extern int scsi_dh_activate(struct request_queue *, activate_complete, void *);
+extern int scsi_dh_attach(struct request_queue *, const char *);
+extern const char *scsi_dh_attached_handler_name(struct request_queue *, gfp_t);
+extern int scsi_dh_set_params(struct request_queue *, const char *);
+#else
+static inline int scsi_dh_activate(struct request_queue *req,
+					activate_complete fn, void *data)
+{
+	fn(data, 0);
+	return 0;
+}
+static inline int scsi_dh_attach(struct request_queue *req, const char *name)
+{
+	return SCSI_DH_NOSYS;
+}
+static inline const char *scsi_dh_attached_handler_name(struct request_queue *q,
+							gfp_t gfp)
+{
+	return NULL;
+}
+static inline int scsi_dh_set_params(struct request_queue *req, const char *params)
+{
+	return -SCSI_DH_NOSYS;
+}
+#endif
diff --git a/include/scsi/scsi_driver.h b/include/scsi/scsi_driver.h
new file mode 100644
index 000000000..fae8b4652
--- /dev/null
+++ b/include/scsi/scsi_driver.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _SCSI_SCSI_DRIVER_H
+#define _SCSI_SCSI_DRIVER_H
+
+#include <linux/device.h>
+
+struct module;
+struct request;
+struct scsi_cmnd;
+struct scsi_device;
+
+struct scsi_driver {
+	struct device_driver	gendrv;
+
+	void (*rescan)(struct device *);
+	int (*init_command)(struct scsi_cmnd *);
+	void (*uninit_command)(struct scsi_cmnd *);
+	int (*done)(struct scsi_cmnd *);
+	int (*eh_action)(struct scsi_cmnd *, int);
+	void (*eh_reset)(struct scsi_cmnd *);
+};
+#define to_scsi_driver(drv) \
+	container_of((drv), struct scsi_driver, gendrv)
+
+extern int scsi_register_driver(struct device_driver *);
+#define scsi_unregister_driver(drv) \
+	driver_unregister(drv);
+
+extern int scsi_register_interface(struct class_interface *);
+#define scsi_unregister_interface(intf) \
+	class_interface_unregister(intf)
+
+#endif /* _SCSI_SCSI_DRIVER_H */
diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h
new file mode 100644
index 000000000..91f403341
--- /dev/null
+++ b/include/scsi/scsi_eh.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _SCSI_SCSI_EH_H
+#define _SCSI_SCSI_EH_H
+
+#include <linux/scatterlist.h>
+
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_common.h>
+struct scsi_device;
+struct Scsi_Host;
+
+extern void scsi_eh_finish_cmd(struct scsi_cmnd *scmd,
+			       struct list_head *done_q);
+extern void scsi_eh_flush_done_q(struct list_head *done_q);
+extern void scsi_report_bus_reset(struct Scsi_Host *, int);
+extern void scsi_report_device_reset(struct Scsi_Host *, int, int);
+extern int scsi_block_when_processing_errors(struct scsi_device *);
+extern bool scsi_command_normalize_sense(const struct scsi_cmnd *cmd,
+					 struct scsi_sense_hdr *sshdr);
+extern int scsi_check_sense(struct scsi_cmnd *);
+
+static inline bool scsi_sense_is_deferred(const struct scsi_sense_hdr *sshdr)
+{
+	return ((sshdr->response_code >= 0x70) && (sshdr->response_code & 1));
+}
+
+extern bool scsi_get_sense_info_fld(const u8 *sense_buffer, int sb_len,
+				    u64 *info_out);
+
+extern int scsi_ioctl_reset(struct scsi_device *, int __user *);
+
+struct scsi_eh_save {
+	/* saved state */
+	int result;
+	unsigned int resid_len;
+	int eh_eflags;
+	enum dma_data_direction data_direction;
+	unsigned underflow;
+	unsigned char cmd_len;
+	unsigned char prot_op;
+	unsigned char *cmnd;
+	struct scsi_data_buffer sdb;
+	struct request *next_rq;
+	/* new command support */
+	unsigned char eh_cmnd[BLK_MAX_CDB];
+	struct scatterlist sense_sgl;
+};
+
+extern void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd,
+		struct scsi_eh_save *ses, unsigned char *cmnd,
+		int cmnd_size, unsigned sense_bytes);
+
+extern void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd,
+		struct scsi_eh_save *ses);
+
+#endif /* _SCSI_SCSI_EH_H */
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
new file mode 100644
index 000000000..5ea06d310
--- /dev/null
+++ b/include/scsi/scsi_host.h
@@ -0,0 +1,896 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _SCSI_SCSI_HOST_H
+#define _SCSI_SCSI_HOST_H
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+#include <linux/mutex.h>
+#include <linux/seq_file.h>
+#include <linux/blk-mq.h>
+#include <scsi/scsi.h>
+
+struct request_queue;
+struct block_device;
+struct completion;
+struct module;
+struct scsi_cmnd;
+struct scsi_device;
+struct scsi_host_cmd_pool;
+struct scsi_target;
+struct Scsi_Host;
+struct scsi_host_cmd_pool;
+struct scsi_transport_template;
+struct blk_queue_tags;
+
+
+/*
+ * The various choices mean:
+ * NONE: Self evident.	Host adapter is not capable of scatter-gather.
+ * ALL:	 Means that the host adapter module can do scatter-gather,
+ *	 and that there is no limit to the size of the table to which
+ *	 we scatter/gather data.  The value we set here is the maximum
+ *	 single element sglist.  To use chained sglists, the adapter
+ *	 has to set a value beyond ALL (and correctly use the chain
+ *	 handling API.
+ * Anything else:  Indicates the maximum number of chains that can be
+ *	 used in one scatter-gather request.
+ */
+#define SG_NONE 0
+#define SG_ALL	SG_CHUNK_SIZE
+
+#define MODE_UNKNOWN 0x00
+#define MODE_INITIATOR 0x01
+#define MODE_TARGET 0x02
+
+#define DISABLE_CLUSTERING 0
+#define ENABLE_CLUSTERING 1
+
+struct scsi_host_template {
+	struct module *module;
+	const char *name;
+
+	/*
+	 * The info function will return whatever useful information the
+	 * developer sees fit.  If not provided, then the name field will
+	 * be used instead.
+	 *
+	 * Status: OPTIONAL
+	 */
+	const char *(* info)(struct Scsi_Host *);
+
+	/*
+	 * Ioctl interface
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* ioctl)(struct scsi_device *dev, int cmd, void __user *arg);
+
+
+#ifdef CONFIG_COMPAT
+	/* 
+	 * Compat handler. Handle 32bit ABI.
+	 * When unknown ioctl is passed return -ENOIOCTLCMD.
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* compat_ioctl)(struct scsi_device *dev, int cmd, void __user *arg);
+#endif
+
+	/*
+	 * The queuecommand function is used to queue up a scsi
+	 * command block to the LLDD.  When the driver finished
+	 * processing the command the done callback is invoked.
+	 *
+	 * If queuecommand returns 0, then the HBA has accepted the
+	 * command.  The done() function must be called on the command
+	 * when the driver has finished with it. (you may call done on the
+	 * command before queuecommand returns, but in this case you
+	 * *must* return 0 from queuecommand).
+	 *
+	 * Queuecommand may also reject the command, in which case it may
+	 * not touch the command and must not call done() for it.
+	 *
+	 * There are two possible rejection returns:
+	 *
+	 *   SCSI_MLQUEUE_DEVICE_BUSY: Block this device temporarily, but
+	 *   allow commands to other devices serviced by this host.
+	 *
+	 *   SCSI_MLQUEUE_HOST_BUSY: Block all devices served by this
+	 *   host temporarily.
+	 *
+         * For compatibility, any other non-zero return is treated the
+         * same as SCSI_MLQUEUE_HOST_BUSY.
+	 *
+	 * NOTE: "temporarily" means either until the next command for#
+	 * this device/host completes, or a period of time determined by
+	 * I/O pressure in the system if there are no other outstanding
+	 * commands.
+	 *
+	 * STATUS: REQUIRED
+	 */
+	int (* queuecommand)(struct Scsi_Host *, struct scsi_cmnd *);
+
+	/*
+	 * This is an error handling strategy routine.  You don't need to
+	 * define one of these if you don't want to - there is a default
+	 * routine that is present that should work in most cases.  For those
+	 * driver authors that have the inclination and ability to write their
+	 * own strategy routine, this is where it is specified.  Note - the
+	 * strategy routine is *ALWAYS* run in the context of the kernel eh
+	 * thread.  Thus you are guaranteed to *NOT* be in an interrupt
+	 * handler when you execute this, and you are also guaranteed to
+	 * *NOT* have any other commands being queued while you are in the
+	 * strategy routine. When you return from this function, operations
+	 * return to normal.
+	 *
+	 * See scsi_error.c scsi_unjam_host for additional comments about
+	 * what this function should and should not be attempting to do.
+	 *
+	 * Status: REQUIRED	(at least one of them)
+	 */
+	int (* eh_abort_handler)(struct scsi_cmnd *);
+	int (* eh_device_reset_handler)(struct scsi_cmnd *);
+	int (* eh_target_reset_handler)(struct scsi_cmnd *);
+	int (* eh_bus_reset_handler)(struct scsi_cmnd *);
+	int (* eh_host_reset_handler)(struct scsi_cmnd *);
+
+	/*
+	 * Before the mid layer attempts to scan for a new device where none
+	 * currently exists, it will call this entry in your driver.  Should
+	 * your driver need to allocate any structs or perform any other init
+	 * items in order to send commands to a currently unused target/lun
+	 * combo, then this is where you can perform those allocations.  This
+	 * is specifically so that drivers won't have to perform any kind of
+	 * "is this a new device" checks in their queuecommand routine,
+	 * thereby making the hot path a bit quicker.
+	 *
+	 * Return values: 0 on success, non-0 on failure
+	 *
+	 * Deallocation:  If we didn't find any devices at this ID, you will
+	 * get an immediate call to slave_destroy().  If we find something
+	 * here then you will get a call to slave_configure(), then the
+	 * device will be used for however long it is kept around, then when
+	 * the device is removed from the system (or * possibly at reboot
+	 * time), you will then get a call to slave_destroy().  This is
+	 * assuming you implement slave_configure and slave_destroy.
+	 * However, if you allocate memory and hang it off the device struct,
+	 * then you must implement the slave_destroy() routine at a minimum
+	 * in order to avoid leaking memory
+	 * each time a device is tore down.
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* slave_alloc)(struct scsi_device *);
+
+	/*
+	 * Once the device has responded to an INQUIRY and we know the
+	 * device is online, we call into the low level driver with the
+	 * struct scsi_device *.  If the low level device driver implements
+	 * this function, it *must* perform the task of setting the queue
+	 * depth on the device.  All other tasks are optional and depend
+	 * on what the driver supports and various implementation details.
+	 * 
+	 * Things currently recommended to be handled at this time include:
+	 *
+	 * 1.  Setting the device queue depth.  Proper setting of this is
+	 *     described in the comments for scsi_change_queue_depth.
+	 * 2.  Determining if the device supports the various synchronous
+	 *     negotiation protocols.  The device struct will already have
+	 *     responded to INQUIRY and the results of the standard items
+	 *     will have been shoved into the various device flag bits, eg.
+	 *     device->sdtr will be true if the device supports SDTR messages.
+	 * 3.  Allocating command structs that the device will need.
+	 * 4.  Setting the default timeout on this device (if needed).
+	 * 5.  Anything else the low level driver might want to do on a device
+	 *     specific setup basis...
+	 * 6.  Return 0 on success, non-0 on error.  The device will be marked
+	 *     as offline on error so that no access will occur.  If you return
+	 *     non-0, your slave_destroy routine will never get called for this
+	 *     device, so don't leave any loose memory hanging around, clean
+	 *     up after yourself before returning non-0
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* slave_configure)(struct scsi_device *);
+
+	/*
+	 * Immediately prior to deallocating the device and after all activity
+	 * has ceased the mid layer calls this point so that the low level
+	 * driver may completely detach itself from the scsi device and vice
+	 * versa.  The low level driver is responsible for freeing any memory
+	 * it allocated in the slave_alloc or slave_configure calls. 
+	 *
+	 * Status: OPTIONAL
+	 */
+	void (* slave_destroy)(struct scsi_device *);
+
+	/*
+	 * Before the mid layer attempts to scan for a new device attached
+	 * to a target where no target currently exists, it will call this
+	 * entry in your driver.  Should your driver need to allocate any
+	 * structs or perform any other init items in order to send commands
+	 * to a currently unused target, then this is where you can perform
+	 * those allocations.
+	 *
+	 * Return values: 0 on success, non-0 on failure
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* target_alloc)(struct scsi_target *);
+
+	/*
+	 * Immediately prior to deallocating the target structure, and
+	 * after all activity to attached scsi devices has ceased, the
+	 * midlayer calls this point so that the driver may deallocate
+	 * and terminate any references to the target.
+	 *
+	 * Status: OPTIONAL
+	 */
+	void (* target_destroy)(struct scsi_target *);
+
+	/*
+	 * If a host has the ability to discover targets on its own instead
+	 * of scanning the entire bus, it can fill in this function and
+	 * call scsi_scan_host().  This function will be called periodically
+	 * until it returns 1 with the scsi_host and the elapsed time of
+	 * the scan in jiffies.
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* scan_finished)(struct Scsi_Host *, unsigned long);
+
+	/*
+	 * If the host wants to be called before the scan starts, but
+	 * after the midlayer has set up ready for the scan, it can fill
+	 * in this function.
+	 *
+	 * Status: OPTIONAL
+	 */
+	void (* scan_start)(struct Scsi_Host *);
+
+	/*
+	 * Fill in this function to allow the queue depth of this host
+	 * to be changeable (on a per device basis).  Returns either
+	 * the current queue depth setting (may be different from what
+	 * was passed in) or an error.  An error should only be
+	 * returned if the requested depth is legal but the driver was
+	 * unable to set it.  If the requested depth is illegal, the
+	 * driver should set and return the closest legal queue depth.
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* change_queue_depth)(struct scsi_device *, int);
+
+	/*
+	 * This functions lets the driver expose the queue mapping
+	 * to the block layer.
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* map_queues)(struct Scsi_Host *shost);
+
+	/*
+	 * This function determines the BIOS parameters for a given
+	 * harddisk.  These tend to be numbers that are made up by
+	 * the host adapter.  Parameters:
+	 * size, device, list (heads, sectors, cylinders)
+	 *
+	 * Status: OPTIONAL
+	 */
+	int (* bios_param)(struct scsi_device *, struct block_device *,
+			sector_t, int []);
+
+	/*
+	 * This function is called when one or more partitions on the
+	 * device reach beyond the end of the device.
+	 *
+	 * Status: OPTIONAL
+	 */
+	void (*unlock_native_capacity)(struct scsi_device *);
+
+	/*
+	 * Can be used to export driver statistics and other infos to the
+	 * world outside the kernel ie. userspace and it also provides an
+	 * interface to feed the driver with information.
+	 *
+	 * Status: OBSOLETE
+	 */
+	int (*show_info)(struct seq_file *, struct Scsi_Host *);
+	int (*write_info)(struct Scsi_Host *, char *, int);
+
+	/*
+	 * This is an optional routine that allows the transport to become
+	 * involved when a scsi io timer fires. The return value tells the
+	 * timer routine how to finish the io timeout handling:
+	 * EH_HANDLED:		I fixed the error, please complete the command
+	 * EH_RESET_TIMER:	I need more time, reset the timer and
+	 *			begin counting again
+	 * EH_DONE:		Begin normal error recovery
+	 *
+	 * Status: OPTIONAL
+	 */
+	enum blk_eh_timer_return (*eh_timed_out)(struct scsi_cmnd *);
+
+	/* This is an optional routine that allows transport to initiate
+	 * LLD adapter or firmware reset using sysfs attribute.
+	 *
+	 * Return values: 0 on success, -ve value on failure.
+	 *
+	 * Status: OPTIONAL
+	 */
+
+	int (*host_reset)(struct Scsi_Host *shost, int reset_type);
+#define SCSI_ADAPTER_RESET	1
+#define SCSI_FIRMWARE_RESET	2
+
+
+	/*
+	 * Name of proc directory
+	 */
+	const char *proc_name;
+
+	/*
+	 * Used to store the procfs directory if a driver implements the
+	 * show_info method.
+	 */
+	struct proc_dir_entry *proc_dir;
+
+	/*
+	 * This determines if we will use a non-interrupt driven
+	 * or an interrupt driven scheme.  It is set to the maximum number
+	 * of simultaneous commands a given host adapter will accept.
+	 */
+	int can_queue;
+
+	/*
+	 * In many instances, especially where disconnect / reconnect are
+	 * supported, our host also has an ID on the SCSI bus.  If this is
+	 * the case, then it must be reserved.  Please set this_id to -1 if
+	 * your setup is in single initiator mode, and the host lacks an
+	 * ID.
+	 */
+	int this_id;
+
+	/*
+	 * This determines the degree to which the host adapter is capable
+	 * of scatter-gather.
+	 */
+	unsigned short sg_tablesize;
+	unsigned short sg_prot_tablesize;
+
+	/*
+	 * Set this if the host adapter has limitations beside segment count.
+	 */
+	unsigned int max_sectors;
+
+	/*
+	 * DMA scatter gather segment boundary limit. A segment crossing this
+	 * boundary will be split in two.
+	 */
+	unsigned long dma_boundary;
+
+	/*
+	 * This specifies "machine infinity" for host templates which don't
+	 * limit the transfer size.  Note this limit represents an absolute
+	 * maximum, and may be over the transfer limits allowed for
+	 * individual devices (e.g. 256 for SCSI-1).
+	 */
+#define SCSI_DEFAULT_MAX_SECTORS	1024
+
+	/*
+	 * True if this host adapter can make good use of linked commands.
+	 * This will allow more than one command to be queued to a given
+	 * unit on a given host.  Set this to the maximum number of command
+	 * blocks to be provided for each device.  Set this to 1 for one
+	 * command block per lun, 2 for two, etc.  Do not set this to 0.
+	 * You should make sure that the host adapter will do the right thing
+	 * before you try setting this above 1.
+	 */
+	short cmd_per_lun;
+
+	/*
+	 * present contains counter indicating how many boards of this
+	 * type were found when we did the scan.
+	 */
+	unsigned char present;
+
+	/* If use block layer to manage tags, this is tag allocation policy */
+	int tag_alloc_policy;
+
+	/*
+	 * Track QUEUE_FULL events and reduce queue depth on demand.
+	 */
+	unsigned track_queue_depth:1;
+
+	/*
+	 * This specifies the mode that a LLD supports.
+	 */
+	unsigned supported_mode:2;
+
+	/*
+	 * True if this host adapter uses unchecked DMA onto an ISA bus.
+	 */
+	unsigned unchecked_isa_dma:1;
+
+	/*
+	 * True if this host adapter can make good use of clustering.
+	 * I originally thought that if the tablesize was large that it
+	 * was a waste of CPU cycles to prepare a cluster list, but
+	 * it works out that the Buslogic is faster if you use a smaller
+	 * number of segments (i.e. use clustering).  I guess it is
+	 * inefficient.
+	 */
+	unsigned use_clustering:1;
+
+	/*
+	 * True for emulated SCSI host adapters (e.g. ATAPI).
+	 */
+	unsigned emulated:1;
+
+	/*
+	 * True if the low-level driver performs its own reset-settle delays.
+	 */
+	unsigned skip_settle_delay:1;
+
+	/* True if the controller does not support WRITE SAME */
+	unsigned no_write_same:1;
+
+	/* True if the low-level driver supports blk-mq only */
+	unsigned force_blk_mq:1;
+
+	/*
+	 * Countdown for host blocking with no commands outstanding.
+	 */
+	unsigned int max_host_blocked;
+
+	/*
+	 * Default value for the blocking.  If the queue is empty,
+	 * host_blocked counts down in the request_fn until it restarts
+	 * host operations as zero is reached.  
+	 *
+	 * FIXME: This should probably be a value in the template
+	 */
+#define SCSI_DEFAULT_HOST_BLOCKED	7
+
+	/*
+	 * Pointer to the sysfs class properties for this host, NULL terminated.
+	 */
+	struct device_attribute **shost_attrs;
+
+	/*
+	 * Pointer to the SCSI device properties for this host, NULL terminated.
+	 */
+	struct device_attribute **sdev_attrs;
+
+	/*
+	 * Pointer to the SCSI device attribute groups for this host,
+	 * NULL terminated.
+	 */
+	const struct attribute_group **sdev_groups;
+
+	/*
+	 * Vendor Identifier associated with the host
+	 *
+	 * Note: When specifying vendor_id, be sure to read the
+	 *   Vendor Type and ID formatting requirements specified in
+	 *   scsi_netlink.h
+	 */
+	u64 vendor_id;
+
+	/*
+	 * Additional per-command data allocated for the driver.
+	 */
+	unsigned int cmd_size;
+	struct scsi_host_cmd_pool *cmd_pool;
+};
+
+/*
+ * Temporary #define for host lock push down. Can be removed when all
+ * drivers have been updated to take advantage of unlocked
+ * queuecommand.
+ *
+ */
+#define DEF_SCSI_QCMD(func_name) \
+	int func_name(struct Scsi_Host *shost, struct scsi_cmnd *cmd)	\
+	{								\
+		unsigned long irq_flags;				\
+		int rc;							\
+		spin_lock_irqsave(shost->host_lock, irq_flags);		\
+		scsi_cmd_get_serial(shost, cmd);			\
+		rc = func_name##_lck (cmd, cmd->scsi_done);			\
+		spin_unlock_irqrestore(shost->host_lock, irq_flags);	\
+		return rc;						\
+	}
+
+
+/*
+ * shost state: If you alter this, you also need to alter scsi_sysfs.c
+ * (for the ascii descriptions) and the state model enforcer:
+ * scsi_host_set_state()
+ */
+enum scsi_host_state {
+	SHOST_CREATED = 1,
+	SHOST_RUNNING,
+	SHOST_CANCEL,
+	SHOST_DEL,
+	SHOST_RECOVERY,
+	SHOST_CANCEL_RECOVERY,
+	SHOST_DEL_RECOVERY,
+};
+
+struct Scsi_Host {
+	/*
+	 * __devices is protected by the host_lock, but you should
+	 * usually use scsi_device_lookup / shost_for_each_device
+	 * to access it and don't care about locking yourself.
+	 * In the rare case of being in irq context you can use
+	 * their __ prefixed variants with the lock held. NEVER
+	 * access this list directly from a driver.
+	 */
+	struct list_head	__devices;
+	struct list_head	__targets;
+	
+	struct list_head	starved_list;
+
+	spinlock_t		default_lock;
+	spinlock_t		*host_lock;
+
+	struct mutex		scan_mutex;/* serialize scanning activity */
+
+	struct list_head	eh_cmd_q;
+	struct task_struct    * ehandler;  /* Error recovery thread. */
+	struct completion     * eh_action; /* Wait for specific actions on the
+					      host. */
+	wait_queue_head_t       host_wait;
+	struct scsi_host_template *hostt;
+	struct scsi_transport_template *transportt;
+
+	/*
+	 * Area to keep a shared tag map (if needed, will be
+	 * NULL if not).
+	 */
+	union {
+		struct blk_queue_tag	*bqt;
+		struct blk_mq_tag_set	tag_set;
+	};
+
+	atomic_t host_busy;		   /* commands actually active on low-level */
+	atomic_t host_blocked;
+
+	unsigned int host_failed;	   /* commands that failed.
+					      protected by host_lock */
+	unsigned int host_eh_scheduled;    /* EH scheduled without command */
+    
+	unsigned int host_no;  /* Used for IOCTL_GET_IDLUN, /proc/scsi et al. */
+
+	/* next two fields are used to bound the time spent in error handling */
+	int eh_deadline;
+	unsigned long last_reset;
+
+
+	/*
+	 * These three parameters can be used to allow for wide scsi,
+	 * and for host adapters that support multiple busses
+	 * The last two should be set to 1 more than the actual max id
+	 * or lun (e.g. 8 for SCSI parallel systems).
+	 */
+	unsigned int max_channel;
+	unsigned int max_id;
+	u64 max_lun;
+
+	/*
+	 * This is a unique identifier that must be assigned so that we
+	 * have some way of identifying each detected host adapter properly
+	 * and uniquely.  For hosts that do not support more than one card
+	 * in the system at one time, this does not need to be set.  It is
+	 * initialized to 0 in scsi_register.
+	 */
+	unsigned int unique_id;
+
+	/*
+	 * The maximum length of SCSI commands that this host can accept.
+	 * Probably 12 for most host adapters, but could be 16 for others.
+	 * or 260 if the driver supports variable length cdbs.
+	 * For drivers that don't set this field, a value of 12 is
+	 * assumed.
+	 */
+	unsigned short max_cmd_len;
+
+	int this_id;
+	int can_queue;
+	short cmd_per_lun;
+	short unsigned int sg_tablesize;
+	short unsigned int sg_prot_tablesize;
+	unsigned int max_sectors;
+	unsigned long dma_boundary;
+	/*
+	 * In scsi-mq mode, the number of hardware queues supported by the LLD.
+	 *
+	 * Note: it is assumed that each hardware queue has a queue depth of
+	 * can_queue. In other words, the total queue depth per host
+	 * is nr_hw_queues * can_queue.
+	 */
+	unsigned nr_hw_queues;
+	/* 
+	 * Used to assign serial numbers to the cmds.
+	 * Protected by the host lock.
+	 */
+	unsigned long cmd_serial_number;
+	
+	unsigned active_mode:2;
+	unsigned unchecked_isa_dma:1;
+	unsigned use_clustering:1;
+
+	/*
+	 * Host has requested that no further requests come through for the
+	 * time being.
+	 */
+	unsigned host_self_blocked:1;
+    
+	/*
+	 * Host uses correct SCSI ordering not PC ordering. The bit is
+	 * set for the minority of drivers whose authors actually read
+	 * the spec ;).
+	 */
+	unsigned reverse_ordering:1;
+
+	/* Task mgmt function in progress */
+	unsigned tmf_in_progress:1;
+
+	/* Asynchronous scan in progress */
+	unsigned async_scan:1;
+
+	/* Don't resume host in EH */
+	unsigned eh_noresume:1;
+
+	/* The controller does not support WRITE SAME */
+	unsigned no_write_same:1;
+
+	unsigned use_blk_mq:1;
+	unsigned use_cmd_list:1;
+
+	/* Host responded with short (<36 bytes) INQUIRY result */
+	unsigned short_inquiry:1;
+
+	/*
+	 * Optional work queue to be utilized by the transport
+	 */
+	char work_q_name[20];
+	struct workqueue_struct *work_q;
+
+	/*
+	 * Task management function work queue
+	 */
+	struct workqueue_struct *tmf_work_q;
+
+	/* The transport requires the LUN bits NOT to be stored in CDB[1] */
+	unsigned no_scsi2_lun_in_cdb:1;
+
+	/*
+	 * Value host_blocked counts down from
+	 */
+	unsigned int max_host_blocked;
+
+	/* Protection Information */
+	unsigned int prot_capabilities;
+	unsigned char prot_guard_type;
+
+	/* legacy crap */
+	unsigned long base;
+	unsigned long io_port;
+	unsigned char n_io_port;
+	unsigned char dma_channel;
+	unsigned int  irq;
+	
+
+	enum scsi_host_state shost_state;
+
+	/* ldm bits */
+	struct device		shost_gendev, shost_dev;
+
+	/*
+	 * Points to the transport data (if any) which is allocated
+	 * separately
+	 */
+	void *shost_data;
+
+	/*
+	 * Points to the physical bus device we'd use to do DMA
+	 * Needed just in case we have virtual hosts.
+	 */
+	struct device *dma_dev;
+
+	/*
+	 * We should ensure that this is aligned, both for better performance
+	 * and also because some compilers (m68k) don't automatically force
+	 * alignment to a long boundary.
+	 */
+	unsigned long hostdata[0]  /* Used for storage of host specific stuff */
+		__attribute__ ((aligned (sizeof(unsigned long))));
+};
+
+#define		class_to_shost(d)	\
+	container_of(d, struct Scsi_Host, shost_dev)
+
+#define shost_printk(prefix, shost, fmt, a...)	\
+	dev_printk(prefix, &(shost)->shost_gendev, fmt, ##a)
+
+static inline void *shost_priv(struct Scsi_Host *shost)
+{
+	return (void *)shost->hostdata;
+}
+
+int scsi_is_host_device(const struct device *);
+
+static inline struct Scsi_Host *dev_to_shost(struct device *dev)
+{
+	while (!scsi_is_host_device(dev)) {
+		if (!dev->parent)
+			return NULL;
+		dev = dev->parent;
+	}
+	return container_of(dev, struct Scsi_Host, shost_gendev);
+}
+
+static inline int scsi_host_in_recovery(struct Scsi_Host *shost)
+{
+	return shost->shost_state == SHOST_RECOVERY ||
+		shost->shost_state == SHOST_CANCEL_RECOVERY ||
+		shost->shost_state == SHOST_DEL_RECOVERY ||
+		shost->tmf_in_progress;
+}
+
+static inline bool shost_use_blk_mq(struct Scsi_Host *shost)
+{
+	return shost->use_blk_mq;
+}
+
+extern int scsi_queue_work(struct Scsi_Host *, struct work_struct *);
+extern void scsi_flush_work(struct Scsi_Host *);
+
+extern struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *, int);
+extern int __must_check scsi_add_host_with_dma(struct Scsi_Host *,
+					       struct device *,
+					       struct device *);
+extern void scsi_scan_host(struct Scsi_Host *);
+extern void scsi_rescan_device(struct device *);
+extern void scsi_remove_host(struct Scsi_Host *);
+extern struct Scsi_Host *scsi_host_get(struct Scsi_Host *);
+extern int scsi_host_busy(struct Scsi_Host *shost);
+extern void scsi_host_put(struct Scsi_Host *t);
+extern struct Scsi_Host *scsi_host_lookup(unsigned short);
+extern const char *scsi_host_state_name(enum scsi_host_state);
+extern void scsi_cmd_get_serial(struct Scsi_Host *, struct scsi_cmnd *);
+
+static inline int __must_check scsi_add_host(struct Scsi_Host *host,
+					     struct device *dev)
+{
+	return scsi_add_host_with_dma(host, dev, dev);
+}
+
+static inline struct device *scsi_get_device(struct Scsi_Host *shost)
+{
+        return shost->shost_gendev.parent;
+}
+
+/**
+ * scsi_host_scan_allowed - Is scanning of this host allowed
+ * @shost:	Pointer to Scsi_Host.
+ **/
+static inline int scsi_host_scan_allowed(struct Scsi_Host *shost)
+{
+	return shost->shost_state == SHOST_RUNNING ||
+	       shost->shost_state == SHOST_RECOVERY;
+}
+
+extern void scsi_unblock_requests(struct Scsi_Host *);
+extern void scsi_block_requests(struct Scsi_Host *);
+
+struct class_container;
+
+/*
+ * These two functions are used to allocate and free a pseudo device
+ * which will connect to the host adapter itself rather than any
+ * physical device.  You must deallocate when you are done with the
+ * thing.  This physical pseudo-device isn't real and won't be available
+ * from any high-level drivers.
+ */
+extern void scsi_free_host_dev(struct scsi_device *);
+extern struct scsi_device *scsi_get_host_dev(struct Scsi_Host *);
+
+/*
+ * DIF defines the exchange of protection information between
+ * initiator and SBC block device.
+ *
+ * DIX defines the exchange of protection information between OS and
+ * initiator.
+ */
+enum scsi_host_prot_capabilities {
+	SHOST_DIF_TYPE1_PROTECTION = 1 << 0, /* T10 DIF Type 1 */
+	SHOST_DIF_TYPE2_PROTECTION = 1 << 1, /* T10 DIF Type 2 */
+	SHOST_DIF_TYPE3_PROTECTION = 1 << 2, /* T10 DIF Type 3 */
+
+	SHOST_DIX_TYPE0_PROTECTION = 1 << 3, /* DIX between OS and HBA only */
+	SHOST_DIX_TYPE1_PROTECTION = 1 << 4, /* DIX with DIF Type 1 */
+	SHOST_DIX_TYPE2_PROTECTION = 1 << 5, /* DIX with DIF Type 2 */
+	SHOST_DIX_TYPE3_PROTECTION = 1 << 6, /* DIX with DIF Type 3 */
+};
+
+/*
+ * SCSI hosts which support the Data Integrity Extensions must
+ * indicate their capabilities by setting the prot_capabilities using
+ * this call.
+ */
+static inline void scsi_host_set_prot(struct Scsi_Host *shost, unsigned int mask)
+{
+	shost->prot_capabilities = mask;
+}
+
+static inline unsigned int scsi_host_get_prot(struct Scsi_Host *shost)
+{
+	return shost->prot_capabilities;
+}
+
+static inline int scsi_host_prot_dma(struct Scsi_Host *shost)
+{
+	return shost->prot_capabilities >= SHOST_DIX_TYPE0_PROTECTION;
+}
+
+static inline unsigned int scsi_host_dif_capable(struct Scsi_Host *shost, unsigned int target_type)
+{
+	static unsigned char cap[] = { 0,
+				       SHOST_DIF_TYPE1_PROTECTION,
+				       SHOST_DIF_TYPE2_PROTECTION,
+				       SHOST_DIF_TYPE3_PROTECTION };
+
+	if (target_type >= ARRAY_SIZE(cap))
+		return 0;
+
+	return shost->prot_capabilities & cap[target_type] ? target_type : 0;
+}
+
+static inline unsigned int scsi_host_dix_capable(struct Scsi_Host *shost, unsigned int target_type)
+{
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
+	static unsigned char cap[] = { SHOST_DIX_TYPE0_PROTECTION,
+				       SHOST_DIX_TYPE1_PROTECTION,
+				       SHOST_DIX_TYPE2_PROTECTION,
+				       SHOST_DIX_TYPE3_PROTECTION };
+
+	if (target_type >= ARRAY_SIZE(cap))
+		return 0;
+
+	return shost->prot_capabilities & cap[target_type];
+#endif
+	return 0;
+}
+
+/*
+ * All DIX-capable initiators must support the T10-mandated CRC
+ * checksum.  Controllers can optionally implement the IP checksum
+ * scheme which has much lower impact on system performance.  Note
+ * that the main rationale for the checksum is to match integrity
+ * metadata with data.  Detecting bit errors are a job for ECC memory
+ * and buses.
+ */
+
+enum scsi_host_guard_type {
+	SHOST_DIX_GUARD_CRC = 1 << 0,
+	SHOST_DIX_GUARD_IP  = 1 << 1,
+};
+
+static inline void scsi_host_set_guard(struct Scsi_Host *shost, unsigned char type)
+{
+	shost->prot_guard_type = type;
+}
+
+static inline unsigned char scsi_host_get_guard(struct Scsi_Host *shost)
+{
+	return shost->prot_guard_type;
+}
+
+extern int scsi_host_set_state(struct Scsi_Host *, enum scsi_host_state);
+
+#endif /* _SCSI_SCSI_HOST_H */
diff --git a/include/scsi/scsi_ioctl.h b/include/scsi/scsi_ioctl.h
new file mode 100644
index 000000000..5101e987c
--- /dev/null
+++ b/include/scsi/scsi_ioctl.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _SCSI_IOCTL_H
+#define _SCSI_IOCTL_H 
+
+#define SCSI_IOCTL_SEND_COMMAND 1
+#define SCSI_IOCTL_TEST_UNIT_READY 2
+#define SCSI_IOCTL_BENCHMARK_COMMAND 3
+#define SCSI_IOCTL_SYNC 4			/* Request synchronous parameters */
+#define SCSI_IOCTL_START_UNIT 5
+#define SCSI_IOCTL_STOP_UNIT 6
+/* The door lock/unlock constants are compatible with Sun constants for
+   the cdrom */
+#define SCSI_IOCTL_DOORLOCK 0x5380		/* lock the eject mechanism */
+#define SCSI_IOCTL_DOORUNLOCK 0x5381		/* unlock the mechanism	  */
+
+#define	SCSI_REMOVAL_PREVENT	1
+#define	SCSI_REMOVAL_ALLOW	0
+
+#ifdef __KERNEL__
+
+struct scsi_device;
+
+/*
+ * Structures used for scsi_ioctl et al.
+ */
+
+typedef struct scsi_ioctl_command {
+	unsigned int inlen;
+	unsigned int outlen;
+	unsigned char data[0];
+} Scsi_Ioctl_Command;
+
+typedef struct scsi_idlun {
+	__u32 dev_id;
+	__u32 host_unique_id;
+} Scsi_Idlun;
+
+/* Fibre Channel WWN, port_id struct */
+typedef struct scsi_fctargaddress {
+	__u32 host_port_id;
+	unsigned char host_wwn[8]; // include NULL term.
+} Scsi_FCTargAddress;
+
+int scsi_ioctl_block_when_processing_errors(struct scsi_device *sdev,
+		int cmd, bool ndelay);
+extern int scsi_ioctl(struct scsi_device *, int, void __user *);
+
+#endif /* __KERNEL__ */
+#endif /* _SCSI_IOCTL_H */
diff --git a/include/scsi/scsi_proto.h b/include/scsi/scsi_proto.h
new file mode 100644
index 000000000..c36860111
--- /dev/null
+++ b/include/scsi/scsi_proto.h
@@ -0,0 +1,344 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header file contains public constants and structures used by
+ * both the SCSI initiator and the SCSI target code.
+ *
+ * For documentation on the OPCODES, MESSAGES, and SENSE values,
+ * please consult the SCSI standard.
+ */
+
+#ifndef _SCSI_PROTO_H_
+#define _SCSI_PROTO_H_
+
+#include <linux/types.h>
+
+/*
+ *      SCSI opcodes
+ */
+
+#define TEST_UNIT_READY       0x00
+#define REZERO_UNIT           0x01
+#define REQUEST_SENSE         0x03
+#define FORMAT_UNIT           0x04
+#define READ_BLOCK_LIMITS     0x05
+#define REASSIGN_BLOCKS       0x07
+#define INITIALIZE_ELEMENT_STATUS 0x07
+#define READ_6                0x08
+#define WRITE_6               0x0a
+#define SEEK_6                0x0b
+#define READ_REVERSE          0x0f
+#define WRITE_FILEMARKS       0x10
+#define SPACE                 0x11
+#define INQUIRY               0x12
+#define RECOVER_BUFFERED_DATA 0x14
+#define MODE_SELECT           0x15
+#define RESERVE               0x16
+#define RELEASE               0x17
+#define COPY                  0x18
+#define ERASE                 0x19
+#define MODE_SENSE            0x1a
+#define START_STOP            0x1b
+#define RECEIVE_DIAGNOSTIC    0x1c
+#define SEND_DIAGNOSTIC       0x1d
+#define ALLOW_MEDIUM_REMOVAL  0x1e
+
+#define READ_FORMAT_CAPACITIES 0x23
+#define SET_WINDOW            0x24
+#define READ_CAPACITY         0x25
+#define READ_10               0x28
+#define WRITE_10              0x2a
+#define SEEK_10               0x2b
+#define POSITION_TO_ELEMENT   0x2b
+#define WRITE_VERIFY          0x2e
+#define VERIFY                0x2f
+#define SEARCH_HIGH           0x30
+#define SEARCH_EQUAL          0x31
+#define SEARCH_LOW            0x32
+#define SET_LIMITS            0x33
+#define PRE_FETCH             0x34
+#define READ_POSITION         0x34
+#define SYNCHRONIZE_CACHE     0x35
+#define LOCK_UNLOCK_CACHE     0x36
+#define READ_DEFECT_DATA      0x37
+#define MEDIUM_SCAN           0x38
+#define COMPARE               0x39
+#define COPY_VERIFY           0x3a
+#define WRITE_BUFFER          0x3b
+#define READ_BUFFER           0x3c
+#define UPDATE_BLOCK          0x3d
+#define READ_LONG             0x3e
+#define WRITE_LONG            0x3f
+#define CHANGE_DEFINITION     0x40
+#define WRITE_SAME            0x41
+#define UNMAP		      0x42
+#define READ_TOC              0x43
+#define READ_HEADER           0x44
+#define GET_EVENT_STATUS_NOTIFICATION 0x4a
+#define LOG_SELECT            0x4c
+#define LOG_SENSE             0x4d
+#define XDWRITEREAD_10        0x53
+#define MODE_SELECT_10        0x55
+#define RESERVE_10            0x56
+#define RELEASE_10            0x57
+#define MODE_SENSE_10         0x5a
+#define PERSISTENT_RESERVE_IN 0x5e
+#define PERSISTENT_RESERVE_OUT 0x5f
+#define VARIABLE_LENGTH_CMD   0x7f
+#define REPORT_LUNS           0xa0
+#define SECURITY_PROTOCOL_IN  0xa2
+#define MAINTENANCE_IN        0xa3
+#define MAINTENANCE_OUT       0xa4
+#define MOVE_MEDIUM           0xa5
+#define EXCHANGE_MEDIUM       0xa6
+#define READ_12               0xa8
+#define SERVICE_ACTION_OUT_12 0xa9
+#define WRITE_12              0xaa
+#define READ_MEDIA_SERIAL_NUMBER 0xab /* Obsolete with SPC-2 */
+#define SERVICE_ACTION_IN_12  0xab
+#define WRITE_VERIFY_12       0xae
+#define VERIFY_12	      0xaf
+#define SEARCH_HIGH_12        0xb0
+#define SEARCH_EQUAL_12       0xb1
+#define SEARCH_LOW_12         0xb2
+#define SECURITY_PROTOCOL_OUT 0xb5
+#define READ_ELEMENT_STATUS   0xb8
+#define SEND_VOLUME_TAG       0xb6
+#define WRITE_LONG_2          0xea
+#define EXTENDED_COPY         0x83
+#define RECEIVE_COPY_RESULTS  0x84
+#define ACCESS_CONTROL_IN     0x86
+#define ACCESS_CONTROL_OUT    0x87
+#define READ_16               0x88
+#define COMPARE_AND_WRITE     0x89
+#define WRITE_16              0x8a
+#define READ_ATTRIBUTE        0x8c
+#define WRITE_ATTRIBUTE	      0x8d
+#define WRITE_VERIFY_16	      0x8e
+#define VERIFY_16	      0x8f
+#define SYNCHRONIZE_CACHE_16  0x91
+#define WRITE_SAME_16	      0x93
+#define ZBC_OUT		      0x94
+#define ZBC_IN		      0x95
+#define SERVICE_ACTION_BIDIRECTIONAL 0x9d
+#define SERVICE_ACTION_IN_16  0x9e
+#define SERVICE_ACTION_OUT_16 0x9f
+/* values for service action in */
+#define	SAI_READ_CAPACITY_16  0x10
+#define SAI_GET_LBA_STATUS    0x12
+#define SAI_REPORT_REFERRALS  0x13
+/* values for maintenance in */
+#define MI_REPORT_IDENTIFYING_INFORMATION 0x05
+#define MI_REPORT_TARGET_PGS  0x0a
+#define MI_REPORT_ALIASES     0x0b
+#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c
+#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d
+#define MI_REPORT_PRIORITY    0x0e
+#define MI_REPORT_TIMESTAMP   0x0f
+#define MI_MANAGEMENT_PROTOCOL_IN 0x10
+/* value for MI_REPORT_TARGET_PGS ext header */
+#define MI_EXT_HDR_PARAM_FMT  0x20
+/* values for maintenance out */
+#define MO_SET_IDENTIFYING_INFORMATION 0x06
+#define MO_SET_TARGET_PGS     0x0a
+#define MO_CHANGE_ALIASES     0x0b
+#define MO_SET_PRIORITY       0x0e
+#define MO_SET_TIMESTAMP      0x0f
+#define MO_MANAGEMENT_PROTOCOL_OUT 0x10
+/* values for ZBC_IN */
+#define ZI_REPORT_ZONES	      0x00
+/* values for ZBC_OUT */
+#define ZO_CLOSE_ZONE	      0x01
+#define ZO_FINISH_ZONE	      0x02
+#define ZO_OPEN_ZONE	      0x03
+#define ZO_RESET_WRITE_POINTER 0x04
+/* values for variable length command */
+#define XDREAD_32	      0x03
+#define XDWRITE_32	      0x04
+#define XPWRITE_32	      0x06
+#define XDWRITEREAD_32	      0x07
+#define READ_32		      0x09
+#define VERIFY_32	      0x0a
+#define WRITE_32	      0x0b
+#define WRITE_VERIFY_32	      0x0c
+#define WRITE_SAME_32	      0x0d
+#define ATA_32		      0x1ff0
+
+/* Values for T10/04-262r7 */
+#define	ATA_16		      0x85	/* 16-byte pass-thru */
+#define	ATA_12		      0xa1	/* 12-byte pass-thru */
+
+/* Vendor specific CDBs start here */
+#define VENDOR_SPECIFIC_CDB 0xc0
+
+/*
+ *	SCSI command lengths
+ */
+
+#define SCSI_MAX_VARLEN_CDB_SIZE 260
+
+/* defined in T10 SCSI Primary Commands-2 (SPC2) */
+struct scsi_varlen_cdb_hdr {
+	__u8 opcode;        /* opcode always == VARIABLE_LENGTH_CMD */
+	__u8 control;
+	__u8 misc[5];
+	__u8 additional_cdb_length;         /* total cdb length - 8 */
+	__be16 service_action;
+	/* service specific data follows */
+};
+
+/*
+ *  SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
+ *  T10/1561-D Revision 4 Draft dated 7th November 2002.
+ */
+#define SAM_STAT_GOOD            0x00
+#define SAM_STAT_CHECK_CONDITION 0x02
+#define SAM_STAT_CONDITION_MET   0x04
+#define SAM_STAT_BUSY            0x08
+#define SAM_STAT_INTERMEDIATE    0x10
+#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
+#define SAM_STAT_RESERVATION_CONFLICT 0x18
+#define SAM_STAT_COMMAND_TERMINATED 0x22	/* obsolete in SAM-3 */
+#define SAM_STAT_TASK_SET_FULL   0x28
+#define SAM_STAT_ACA_ACTIVE      0x30
+#define SAM_STAT_TASK_ABORTED    0x40
+
+/*
+ *  Status codes. These are deprecated as they are shifted 1 bit right
+ *  from those found in the SCSI standards. This causes confusion for
+ *  applications that are ported to several OSes. Prefer SAM Status codes
+ *  above.
+ */
+
+#define GOOD                 0x00
+#define CHECK_CONDITION      0x01
+#define CONDITION_GOOD       0x02
+#define BUSY                 0x04
+#define INTERMEDIATE_GOOD    0x08
+#define INTERMEDIATE_C_GOOD  0x0a
+#define RESERVATION_CONFLICT 0x0c
+#define COMMAND_TERMINATED   0x11
+#define QUEUE_FULL           0x14
+#define ACA_ACTIVE           0x18
+#define TASK_ABORTED         0x20
+
+#define STATUS_MASK          0xfe
+
+/*
+ *  SENSE KEYS
+ */
+
+#define NO_SENSE            0x00
+#define RECOVERED_ERROR     0x01
+#define NOT_READY           0x02
+#define MEDIUM_ERROR        0x03
+#define HARDWARE_ERROR      0x04
+#define ILLEGAL_REQUEST     0x05
+#define UNIT_ATTENTION      0x06
+#define DATA_PROTECT        0x07
+#define BLANK_CHECK         0x08
+#define VENDOR_SPECIFIC     0x09
+#define COPY_ABORTED        0x0a
+#define ABORTED_COMMAND     0x0b
+#define VOLUME_OVERFLOW     0x0d
+#define MISCOMPARE          0x0e
+
+
+/*
+ *  DEVICE TYPES
+ *  Please keep them in 0x%02x format for $MODALIAS to work
+ */
+
+#define TYPE_DISK           0x00
+#define TYPE_TAPE           0x01
+#define TYPE_PRINTER        0x02
+#define TYPE_PROCESSOR      0x03    /* HP scanners use this */
+#define TYPE_WORM           0x04    /* Treated as ROM by our system */
+#define TYPE_ROM            0x05
+#define TYPE_SCANNER        0x06
+#define TYPE_MOD            0x07    /* Magneto-optical disk -
+				     * - treated as TYPE_DISK */
+#define TYPE_MEDIUM_CHANGER 0x08
+#define TYPE_COMM           0x09    /* Communications device */
+#define TYPE_RAID           0x0c
+#define TYPE_ENCLOSURE      0x0d    /* Enclosure Services Device */
+#define TYPE_RBC	    0x0e
+#define TYPE_OSD            0x11
+#define TYPE_ZBC            0x14
+#define TYPE_WLUN           0x1e    /* well-known logical unit */
+#define TYPE_NO_LUN         0x7f
+
+/* SCSI protocols; these are taken from SPC-3 section 7.5 */
+enum scsi_protocol {
+	SCSI_PROTOCOL_FCP = 0,	/* Fibre Channel */
+	SCSI_PROTOCOL_SPI = 1,	/* parallel SCSI */
+	SCSI_PROTOCOL_SSA = 2,	/* Serial Storage Architecture - Obsolete */
+	SCSI_PROTOCOL_SBP = 3,	/* firewire */
+	SCSI_PROTOCOL_SRP = 4,	/* Infiniband RDMA */
+	SCSI_PROTOCOL_ISCSI = 5,
+	SCSI_PROTOCOL_SAS = 6,
+	SCSI_PROTOCOL_ADT = 7,	/* Media Changers */
+	SCSI_PROTOCOL_ATA = 8,
+	SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */
+};
+
+/*
+ * ScsiLun: 8 byte LUN.
+ */
+struct scsi_lun {
+	__u8 scsi_lun[8];
+};
+
+/* SPC asymmetric access states */
+#define SCSI_ACCESS_STATE_OPTIMAL     0x00
+#define SCSI_ACCESS_STATE_ACTIVE      0x01
+#define SCSI_ACCESS_STATE_STANDBY     0x02
+#define SCSI_ACCESS_STATE_UNAVAILABLE 0x03
+#define SCSI_ACCESS_STATE_LBA         0x04
+#define SCSI_ACCESS_STATE_OFFLINE     0x0e
+#define SCSI_ACCESS_STATE_TRANSITIONING 0x0f
+
+/* Values for REPORT TARGET GROUP STATES */
+#define SCSI_ACCESS_STATE_MASK        0x0f
+#define SCSI_ACCESS_STATE_PREFERRED   0x80
+
+/* Reporting options for REPORT ZONES */
+enum zbc_zone_reporting_options {
+	ZBC_ZONE_REPORTING_OPTION_ALL		= 0x00,
+	ZBC_ZONE_REPORTING_OPTION_EMPTY		= 0x01,
+	ZBC_ZONE_REPORTING_OPTION_IMPLICIT_OPEN	= 0x02,
+	ZBC_ZONE_REPORTING_OPTION_EXPLICIT_OPEN	= 0x03,
+	ZBC_ZONE_REPORTING_OPTION_CLOSED	= 0x04,
+	ZBC_ZONE_REPORTING_OPTION_FULL		= 0x05,
+	ZBC_ZONE_REPORTING_OPTION_READONLY	= 0x06,
+	ZBC_ZONE_REPORTING_OPTION_OFFLINE	= 0x07,
+	/* 0x08 to 0x0f are reserved */
+	ZBC_ZONE_REPORTING_OPTION_NEED_RESET_WP	= 0x10,
+	ZBC_ZONE_REPORTING_OPTION_NON_SEQWRITE	= 0x11,
+	/* 0x12 to 0x3e are reserved */
+	ZBC_ZONE_REPORTING_OPTION_NON_WP	= 0x3f,
+};
+
+#define ZBC_REPORT_ZONE_PARTIAL 0x80
+
+/* Zone types of REPORT ZONES zone descriptors */
+enum zbc_zone_type {
+	ZBC_ZONE_TYPE_CONV		= 0x1,
+	ZBC_ZONE_TYPE_SEQWRITE_REQ	= 0x2,
+	ZBC_ZONE_TYPE_SEQWRITE_PREF	= 0x3,
+	/* 0x4 to 0xf are reserved */
+};
+
+/* Zone conditions of REPORT ZONES zone descriptors */
+enum zbc_zone_cond {
+	ZBC_ZONE_COND_NO_WP		= 0x0,
+	ZBC_ZONE_COND_EMPTY		= 0x1,
+	ZBC_ZONE_COND_IMP_OPEN		= 0x2,
+	ZBC_ZONE_COND_EXP_OPEN		= 0x3,
+	ZBC_ZONE_COND_CLOSED		= 0x4,
+	/* 0x5 to 0xc are reserved */
+	ZBC_ZONE_COND_READONLY		= 0xd,
+	ZBC_ZONE_COND_FULL		= 0xe,
+	ZBC_ZONE_COND_OFFLINE		= 0xf,
+};
+
+#endif /* _SCSI_PROTO_H_ */
diff --git a/include/scsi/scsi_request.h b/include/scsi/scsi_request.h
new file mode 100644
index 000000000..b06f28c74
--- /dev/null
+++ b/include/scsi/scsi_request.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _SCSI_SCSI_REQUEST_H
+#define _SCSI_SCSI_REQUEST_H
+
+#include <linux/blk-mq.h>
+
+#define BLK_MAX_CDB	16
+
+struct scsi_request {
+	unsigned char	__cmd[BLK_MAX_CDB];
+	unsigned char	*cmd;
+	unsigned short	cmd_len;
+	int		result;
+	unsigned int	sense_len;
+	unsigned int	resid_len;	/* residual count */
+	int		retries;
+	void		*sense;
+};
+
+static inline struct scsi_request *scsi_req(struct request *rq)
+{
+	return blk_mq_rq_to_pdu(rq);
+}
+
+static inline void scsi_req_free_cmd(struct scsi_request *req)
+{
+	if (req->cmd != req->__cmd)
+		kfree(req->cmd);
+}
+
+void scsi_req_init(struct scsi_request *req);
+
+#endif /* _SCSI_SCSI_REQUEST_H */
diff --git a/include/scsi/scsi_tcq.h b/include/scsi/scsi_tcq.h
new file mode 100644
index 000000000..e192a0caa
--- /dev/null
+++ b/include/scsi/scsi_tcq.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _SCSI_SCSI_TCQ_H
+#define _SCSI_SCSI_TCQ_H
+
+#include <linux/blkdev.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+
+#define SCSI_NO_TAG	(-1)    /* identify no tag in use */
+
+
+#ifdef CONFIG_BLOCK
+/**
+ * scsi_host_find_tag - find the tagged command by host
+ * @shost:	pointer to scsi_host
+ * @tag:	tag
+ *
+ * Note: for devices using multiple hardware queues tag must have been
+ * generated by blk_mq_unique_tag().
+ **/
+static inline struct scsi_cmnd *scsi_host_find_tag(struct Scsi_Host *shost,
+		int tag)
+{
+	struct request *req = NULL;
+
+	if (tag == SCSI_NO_TAG)
+		return NULL;
+
+	if (shost_use_blk_mq(shost)) {
+		u16 hwq = blk_mq_unique_tag_to_hwq(tag);
+
+		if (hwq < shost->tag_set.nr_hw_queues) {
+			req = blk_mq_tag_to_rq(shost->tag_set.tags[hwq],
+				blk_mq_unique_tag_to_tag(tag));
+		}
+	} else {
+		req = blk_map_queue_find_tag(shost->bqt, tag);
+	}
+
+	if (!req)
+		return NULL;
+	return blk_mq_rq_to_pdu(req);
+}
+
+#endif /* CONFIG_BLOCK */
+#endif /* _SCSI_SCSI_TCQ_H */
diff --git a/include/scsi/scsi_transport.h b/include/scsi/scsi_transport.h
new file mode 100644
index 000000000..a3dcb1bfb
--- /dev/null
+++ b/include/scsi/scsi_transport.h
@@ -0,0 +1,101 @@
+/* 
+ *  Transport specific attributes.
+ *
+ *  Copyright (c) 2003 Silicon Graphics, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef SCSI_TRANSPORT_H
+#define SCSI_TRANSPORT_H
+
+#include <linux/transport_class.h>
+#include <linux/blkdev.h>
+#include <linux/bug.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+
+struct scsi_transport_template {
+	/* the attribute containers */
+	struct transport_container host_attrs;
+	struct transport_container target_attrs;
+	struct transport_container device_attrs;
+
+	/*
+	 * If set, called from sysfs and legacy procfs rescanning code.
+	 */
+	int (*user_scan)(struct Scsi_Host *, uint, uint, u64);
+
+	/* The size of the specific transport attribute structure (a
+	 * space of this size will be left at the end of the
+	 * scsi_* structure */
+	int	device_size;
+	int	device_private_offset;
+	int	target_size;
+	int	target_private_offset;
+	int	host_size;
+	/* no private offset for the host; there's an alternative mechanism */
+
+	/*
+	 * True if the transport wants to use a host-based work-queue
+	 */
+	unsigned int create_work_queue : 1;
+
+	/*
+	 * Allows a transport to override the default error handler.
+	 */
+	void (* eh_strategy_handler)(struct Scsi_Host *);
+};
+
+#define transport_class_to_shost(tc) \
+	dev_to_shost((tc)->parent)
+
+
+/* Private area maintenance. The driver requested allocations come
+ * directly after the transport class allocations (if any).  The idea
+ * is that you *must* call these only once.  The code assumes that the
+ * initial values are the ones the transport specific code requires */
+static inline void
+scsi_transport_reserve_target(struct scsi_transport_template * t, int space)
+{
+	BUG_ON(t->target_private_offset != 0);
+	t->target_private_offset = ALIGN(t->target_size, sizeof(void *));
+	t->target_size = t->target_private_offset + space;
+}
+static inline void
+scsi_transport_reserve_device(struct scsi_transport_template * t, int space)
+{
+	BUG_ON(t->device_private_offset != 0);
+	t->device_private_offset = ALIGN(t->device_size, sizeof(void *));
+	t->device_size = t->device_private_offset + space;
+}
+static inline void *
+scsi_transport_target_data(struct scsi_target *starget)
+{
+	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+	return (u8 *)starget->starget_data
+		+ shost->transportt->target_private_offset;
+
+}
+static inline void *
+scsi_transport_device_data(struct scsi_device *sdev)
+{
+	struct Scsi_Host *shost = sdev->host;
+	return (u8 *)sdev->sdev_data
+		+ shost->transportt->device_private_offset;
+}
+
+void __scsi_init_queue(struct Scsi_Host *shost, struct request_queue *q);
+
+#endif /* SCSI_TRANSPORT_H */
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
new file mode 100644
index 000000000..15da45dc2
--- /dev/null
+++ b/include/scsi/scsi_transport_fc.h
@@ -0,0 +1,827 @@
+/*
+ *  FiberChannel transport specific attributes exported to sysfs.
+ *
+ *  Copyright (c) 2003 Silicon Graphics, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *  ========
+ *
+ *  Copyright (C) 2004-2007   James Smart, Emulex Corporation
+ *    Rewrite for host, target, device, and remote port attributes,
+ *    statistics, and service functions...
+ *
+ */
+#ifndef SCSI_TRANSPORT_FC_H
+#define SCSI_TRANSPORT_FC_H
+
+#include <linux/sched.h>
+#include <linux/bsg-lib.h>
+#include <asm/unaligned.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_netlink.h>
+#include <scsi/scsi_host.h>
+
+struct scsi_transport_template;
+
+/*
+ * FC Port definitions - Following FC HBAAPI guidelines
+ *
+ * Note: Not all binary values for the different fields match HBAAPI.
+ *  Instead, we use densely packed ordinal values or enums.
+ *  We get away with this as we never present the actual binary values
+ *  externally. For sysfs, we always present the string that describes
+ *  the value. Thus, an admin doesn't need a magic HBAAPI decoder ring
+ *  to understand the values. The HBAAPI user-space library is free to
+ *  convert the strings into the HBAAPI-specified binary values.
+ *
+ * Note: Not all HBAAPI-defined values are contained in the definitions
+ *  below. Those not appropriate to an fc_host (e.g. FCP initiator) have
+ *  been removed.
+ */
+
+/*
+ * fc_port_type: If you alter this, you also need to alter scsi_transport_fc.c
+ * (for the ascii descriptions).
+ */
+enum fc_port_type {
+	FC_PORTTYPE_UNKNOWN,
+	FC_PORTTYPE_OTHER,
+	FC_PORTTYPE_NOTPRESENT,
+	FC_PORTTYPE_NPORT,		/* Attached to FPort */
+	FC_PORTTYPE_NLPORT,		/* (Public) Loop w/ FLPort */
+	FC_PORTTYPE_LPORT,		/* (Private) Loop w/o FLPort */
+	FC_PORTTYPE_PTP,		/* Point to Point w/ another NPort */
+	FC_PORTTYPE_NPIV,		/* VPORT based on NPIV */
+};
+
+
+/*
+ * fc_port_state: If you alter this, you also need to alter scsi_transport_fc.c
+ * (for the ascii descriptions).
+ */
+enum fc_port_state {
+	FC_PORTSTATE_UNKNOWN,
+	FC_PORTSTATE_NOTPRESENT,
+	FC_PORTSTATE_ONLINE,
+	FC_PORTSTATE_OFFLINE,		/* User has taken Port Offline */
+	FC_PORTSTATE_BLOCKED,
+	FC_PORTSTATE_BYPASSED,
+	FC_PORTSTATE_DIAGNOSTICS,
+	FC_PORTSTATE_LINKDOWN,
+	FC_PORTSTATE_ERROR,
+	FC_PORTSTATE_LOOPBACK,
+	FC_PORTSTATE_DELETED,
+};
+
+
+/*
+ * fc_vport_state: If you alter this, you also need to alter
+ * scsi_transport_fc.c (for the ascii descriptions).
+ */
+enum fc_vport_state {
+	FC_VPORT_UNKNOWN,
+	FC_VPORT_ACTIVE,
+	FC_VPORT_DISABLED,
+	FC_VPORT_LINKDOWN,
+	FC_VPORT_INITIALIZING,
+	FC_VPORT_NO_FABRIC_SUPP,
+	FC_VPORT_NO_FABRIC_RSCS,
+	FC_VPORT_FABRIC_LOGOUT,
+	FC_VPORT_FABRIC_REJ_WWN,
+	FC_VPORT_FAILED,
+};
+
+
+
+/*
+ * FC Classes of Service
+ * Note: values are not enumerated, as they can be "or'd" together
+ * for reporting (e.g. report supported_classes). If you alter this list,
+ * you also need to alter scsi_transport_fc.c (for the ascii descriptions).
+ */
+#define FC_COS_UNSPECIFIED		0
+#define FC_COS_CLASS1			2
+#define FC_COS_CLASS2			4
+#define FC_COS_CLASS3			8
+#define FC_COS_CLASS4			0x10
+#define FC_COS_CLASS6			0x40
+
+/*
+ * FC Port Speeds
+ * Note: values are not enumerated, as they can be "or'd" together
+ * for reporting (e.g. report supported_speeds). If you alter this list,
+ * you also need to alter scsi_transport_fc.c (for the ascii descriptions).
+ */
+#define FC_PORTSPEED_UNKNOWN		0 /* Unknown - transceiver
+					     incapable of reporting */
+#define FC_PORTSPEED_1GBIT		1
+#define FC_PORTSPEED_2GBIT		2
+#define FC_PORTSPEED_10GBIT		4
+#define FC_PORTSPEED_4GBIT		8
+#define FC_PORTSPEED_8GBIT		0x10
+#define FC_PORTSPEED_16GBIT		0x20
+#define FC_PORTSPEED_32GBIT		0x40
+#define FC_PORTSPEED_20GBIT		0x80
+#define FC_PORTSPEED_40GBIT		0x100
+#define FC_PORTSPEED_50GBIT		0x200
+#define FC_PORTSPEED_100GBIT		0x400
+#define FC_PORTSPEED_25GBIT		0x800
+#define FC_PORTSPEED_64GBIT		0x1000
+#define FC_PORTSPEED_128GBIT		0x2000
+#define FC_PORTSPEED_NOT_NEGOTIATED	(1 << 15) /* Speed not established */
+
+/*
+ * fc_tgtid_binding_type: If you alter this, you also need to alter
+ * scsi_transport_fc.c (for the ascii descriptions).
+ */
+enum fc_tgtid_binding_type  {
+	FC_TGTID_BIND_NONE,
+	FC_TGTID_BIND_BY_WWPN,
+	FC_TGTID_BIND_BY_WWNN,
+	FC_TGTID_BIND_BY_ID,
+};
+
+/*
+ * FC Port Roles
+ * Note: values are not enumerated, as they can be "or'd" together
+ * for reporting (e.g. report roles). If you alter this list,
+ * you also need to alter scsi_transport_fc.c (for the ascii descriptions).
+ */
+#define FC_PORT_ROLE_UNKNOWN			0x00
+#define FC_PORT_ROLE_FCP_TARGET			0x01
+#define FC_PORT_ROLE_FCP_INITIATOR		0x02
+#define FC_PORT_ROLE_IP_PORT			0x04
+#define FC_PORT_ROLE_FCP_DUMMY_INITIATOR	0x08
+
+/* The following are for compatibility */
+#define FC_RPORT_ROLE_UNKNOWN			FC_PORT_ROLE_UNKNOWN
+#define FC_RPORT_ROLE_FCP_TARGET		FC_PORT_ROLE_FCP_TARGET
+#define FC_RPORT_ROLE_FCP_INITIATOR		FC_PORT_ROLE_FCP_INITIATOR
+#define FC_RPORT_ROLE_IP_PORT			FC_PORT_ROLE_IP_PORT
+
+
+/* Macro for use in defining Virtual Port attributes */
+#define FC_VPORT_ATTR(_name,_mode,_show,_store)		\
+struct device_attribute dev_attr_vport_##_name = 	\
+	__ATTR(_name,_mode,_show,_store)
+
+/*
+ * fc_vport_identifiers: This set of data contains all elements
+ * to uniquely identify and instantiate a FC virtual port.
+ *
+ * Notes:
+ *   symbolic_name: The driver is to append the symbolic_name string data
+ *      to the symbolic_node_name data that it generates by default.
+ *      the resulting combination should then be registered with the switch.
+ *      It is expected that things like Xen may stuff a VM title into
+ *      this field.
+ */
+#define FC_VPORT_SYMBOLIC_NAMELEN		64
+struct fc_vport_identifiers {
+	u64 node_name;
+	u64 port_name;
+	u32 roles;
+	bool disable;
+	enum fc_port_type vport_type;	/* only FC_PORTTYPE_NPIV allowed */
+	char symbolic_name[FC_VPORT_SYMBOLIC_NAMELEN];
+};
+
+/*
+ * FC Virtual Port Attributes
+ *
+ * This structure exists for each FC port is a virtual FC port. Virtual
+ * ports share the physical link with the Physical port. Each virtual
+ * ports has a unique presence on the SAN, and may be instantiated via
+ * NPIV, Virtual Fabrics, or via additional ALPAs. As the vport is a
+ * unique presence, each vport has it's own view of the fabric,
+ * authentication privilege, and priorities.
+ *
+ * A virtual port may support 1 or more FC4 roles. Typically it is a
+ * FCP Initiator. It could be a FCP Target, or exist sole for an IP over FC
+ * roles. FC port attributes for the vport will be reported on any
+ * fc_host class object allocated for an FCP Initiator.
+ *
+ * --
+ *
+ * Fixed attributes are not expected to change. The driver is
+ * expected to set these values after receiving the fc_vport structure
+ * via the vport_create() call from the transport.
+ * The transport fully manages all get functions w/o driver interaction.
+ *
+ * Dynamic attributes are expected to change. The driver participates
+ * in all get/set operations via functions provided by the driver.
+ *
+ * Private attributes are transport-managed values. They are fully
+ * managed by the transport w/o driver interaction.
+ */
+
+struct fc_vport {
+	/* Fixed Attributes */
+
+	/* Dynamic Attributes */
+
+	/* Private (Transport-managed) Attributes */
+	enum fc_vport_state vport_state;
+	enum fc_vport_state vport_last_state;
+	u64 node_name;
+	u64 port_name;
+	u32 roles;
+	u32 vport_id;		/* Admin Identifier for the vport */
+	enum fc_port_type vport_type;
+	char symbolic_name[FC_VPORT_SYMBOLIC_NAMELEN];
+
+	/* exported data */
+	void *dd_data;			/* Used for driver-specific storage */
+
+	/* internal data */
+	struct Scsi_Host *shost;	/* Physical Port Parent */
+	unsigned int channel;
+	u32 number;
+	u8 flags;
+	struct list_head peers;
+	struct device dev;
+	struct work_struct vport_delete_work;
+} __attribute__((aligned(sizeof(unsigned long))));
+
+/* bit field values for struct fc_vport "flags" field: */
+#define FC_VPORT_CREATING		0x01
+#define FC_VPORT_DELETING		0x02
+#define FC_VPORT_DELETED		0x04
+#define FC_VPORT_DEL			0x06	/* Any DELETE state */
+
+#define	dev_to_vport(d)				\
+	container_of(d, struct fc_vport, dev)
+#define transport_class_to_vport(dev)		\
+	dev_to_vport(dev->parent)
+#define vport_to_shost(v)			\
+	(v->shost)
+#define vport_to_shost_channel(v)		\
+	(v->channel)
+#define vport_to_parent(v)			\
+	(v->dev.parent)
+
+
+/* Error return codes for vport_create() callback */
+#define VPCERR_UNSUPPORTED		-ENOSYS		/* no driver/adapter
+							   support */
+#define VPCERR_BAD_WWN			-ENOTUNIQ	/* driver validation
+							   of WWNs failed */
+#define VPCERR_NO_FABRIC_SUPP		-EOPNOTSUPP	/* Fabric connection
+							   is loop or the
+							   Fabric Port does
+							   not support NPIV */
+
+/*
+ * fc_rport_identifiers: This set of data contains all elements
+ * to uniquely identify a remote FC port. The driver uses this data
+ * to report the existence of a remote FC port in the topology. Internally,
+ * the transport uses this data for attributes and to manage consistent
+ * target id bindings.
+ */
+struct fc_rport_identifiers {
+	u64 node_name;
+	u64 port_name;
+	u32 port_id;
+	u32 roles;
+};
+
+
+/* Macro for use in defining Remote Port attributes */
+#define FC_RPORT_ATTR(_name,_mode,_show,_store)				\
+struct device_attribute dev_attr_rport_##_name = 	\
+	__ATTR(_name,_mode,_show,_store)
+
+
+/*
+ * FC Remote Port Attributes
+ *
+ * This structure exists for each remote FC port that a LLDD notifies
+ * the subsystem of.  A remote FC port may or may not be a SCSI Target,
+ * also be a SCSI initiator, IP endpoint, etc. As such, the remote
+ * port is considered a separate entity, independent of "role" (such
+ * as scsi target).
+ *
+ * --
+ *
+ * Attributes are based on HBAAPI V2.0 definitions. Only those
+ * attributes that are determinable by the local port (aka Host)
+ * are contained.
+ *
+ * Fixed attributes are not expected to change. The driver is
+ * expected to set these values after successfully calling
+ * fc_remote_port_add(). The transport fully manages all get functions
+ * w/o driver interaction.
+ *
+ * Dynamic attributes are expected to change. The driver participates
+ * in all get/set operations via functions provided by the driver.
+ *
+ * Private attributes are transport-managed values. They are fully
+ * managed by the transport w/o driver interaction.
+ */
+
+struct fc_rport {	/* aka fc_starget_attrs */
+	/* Fixed Attributes */
+	u32 maxframe_size;
+	u32 supported_classes;
+
+	/* Dynamic Attributes */
+	u32 dev_loss_tmo;	/* Remote Port loss timeout in seconds. */
+
+	/* Private (Transport-managed) Attributes */
+	u64 node_name;
+	u64 port_name;
+	u32 port_id;
+	u32 roles;
+	enum fc_port_state port_state;	/* Will only be ONLINE or UNKNOWN */
+	u32 scsi_target_id;
+	u32 fast_io_fail_tmo;
+
+	/* exported data */
+	void *dd_data;			/* Used for driver-specific storage */
+
+	/* internal data */
+	unsigned int channel;
+	u32 number;
+	u8 flags;
+	struct list_head peers;
+	struct device dev;
+ 	struct delayed_work dev_loss_work;
+ 	struct work_struct scan_work;
+ 	struct delayed_work fail_io_work;
+ 	struct work_struct stgt_delete_work;
+	struct work_struct rport_delete_work;
+	struct request_queue *rqst_q;	/* bsg support */
+} __attribute__((aligned(sizeof(unsigned long))));
+
+/* bit field values for struct fc_rport "flags" field: */
+#define FC_RPORT_DEVLOSS_PENDING	0x01
+#define FC_RPORT_SCAN_PENDING		0x02
+#define FC_RPORT_FAST_FAIL_TIMEDOUT	0x04
+#define FC_RPORT_DEVLOSS_CALLBK_DONE	0x08
+
+#define	dev_to_rport(d)				\
+	container_of(d, struct fc_rport, dev)
+#define transport_class_to_rport(dev)	\
+	dev_to_rport(dev->parent)
+#define rport_to_shost(r)			\
+	dev_to_shost(r->dev.parent)
+
+/*
+ * FC SCSI Target Attributes
+ *
+ * The SCSI Target is considered an extension of a remote port (as
+ * a remote port can be more than a SCSI Target). Within the scsi
+ * subsystem, we leave the Target as a separate entity. Doing so
+ * provides backward compatibility with prior FC transport api's,
+ * and lets remote ports be handled entirely within the FC transport
+ * and independently from the scsi subsystem. The drawback is that
+ * some data will be duplicated.
+ */
+
+struct fc_starget_attrs {	/* aka fc_target_attrs */
+	/* Dynamic Attributes */
+	u64 node_name;
+	u64 port_name;
+	u32 port_id;
+};
+
+#define fc_starget_node_name(x) \
+	(((struct fc_starget_attrs *)&(x)->starget_data)->node_name)
+#define fc_starget_port_name(x)	\
+	(((struct fc_starget_attrs *)&(x)->starget_data)->port_name)
+#define fc_starget_port_id(x) \
+	(((struct fc_starget_attrs *)&(x)->starget_data)->port_id)
+
+#define starget_to_rport(s)			\
+	scsi_is_fc_rport(s->dev.parent) ? dev_to_rport(s->dev.parent) : NULL
+
+
+/*
+ * FC Local Port (Host) Statistics
+ */
+
+/* FC Statistics - Following FC HBAAPI v2.0 guidelines */
+struct fc_host_statistics {
+	/* port statistics */
+	u64 seconds_since_last_reset;
+	u64 tx_frames;
+	u64 tx_words;
+	u64 rx_frames;
+	u64 rx_words;
+	u64 lip_count;
+	u64 nos_count;
+	u64 error_frames;
+	u64 dumped_frames;
+	u64 link_failure_count;
+	u64 loss_of_sync_count;
+	u64 loss_of_signal_count;
+	u64 prim_seq_protocol_err_count;
+	u64 invalid_tx_word_count;
+	u64 invalid_crc_count;
+
+	/* fc4 statistics  (only FCP supported currently) */
+	u64 fcp_input_requests;
+	u64 fcp_output_requests;
+	u64 fcp_control_requests;
+	u64 fcp_input_megabytes;
+	u64 fcp_output_megabytes;
+	u64 fcp_packet_alloc_failures;	/* fcp packet allocation failures */
+	u64 fcp_packet_aborts;		/* fcp packet aborted */
+	u64 fcp_frame_alloc_failures;	/* fcp frame allocation failures */
+
+	/* fc exches statistics */
+	u64 fc_no_free_exch;		/* no free exch memory */
+	u64 fc_no_free_exch_xid;	/* no free exch id */
+	u64 fc_xid_not_found;		/* exch not found for a response */
+	u64 fc_xid_busy;		/* exch exist for new a request */
+	u64 fc_seq_not_found;		/* seq is not found for exchange */
+	u64 fc_non_bls_resp;		/* a non BLS response frame with
+					   a sequence responder in new exch */
+};
+
+
+/*
+ * FC Event Codes - Polled and Async, following FC HBAAPI v2.0 guidelines
+ */
+
+/*
+ * fc_host_event_code: If you alter this, you also need to alter
+ * scsi_transport_fc.c (for the ascii descriptions).
+ */
+enum fc_host_event_code  {
+	FCH_EVT_LIP			= 0x1,
+	FCH_EVT_LINKUP			= 0x2,
+	FCH_EVT_LINKDOWN		= 0x3,
+	FCH_EVT_LIPRESET		= 0x4,
+	FCH_EVT_RSCN			= 0x5,
+	FCH_EVT_ADAPTER_CHANGE		= 0x103,
+	FCH_EVT_PORT_UNKNOWN		= 0x200,
+	FCH_EVT_PORT_OFFLINE		= 0x201,
+	FCH_EVT_PORT_ONLINE		= 0x202,
+	FCH_EVT_PORT_FABRIC		= 0x204,
+	FCH_EVT_LINK_UNKNOWN		= 0x500,
+	FCH_EVT_VENDOR_UNIQUE		= 0xffff,
+};
+
+
+/*
+ * FC Local Port (Host) Attributes
+ *
+ * Attributes are based on HBAAPI V2.0 definitions.
+ * Note: OSDeviceName is determined by user-space library
+ *
+ * Fixed attributes are not expected to change. The driver is
+ * expected to set these values after successfully calling scsi_add_host().
+ * The transport fully manages all get functions w/o driver interaction.
+ *
+ * Dynamic attributes are expected to change. The driver participates
+ * in all get/set operations via functions provided by the driver.
+ *
+ * Private attributes are transport-managed values. They are fully
+ * managed by the transport w/o driver interaction.
+ */
+
+#define FC_FC4_LIST_SIZE		32
+#define FC_SYMBOLIC_NAME_SIZE		256
+#define FC_VERSION_STRING_SIZE		64
+#define FC_SERIAL_NUMBER_SIZE		80
+
+struct fc_host_attrs {
+	/* Fixed Attributes */
+	u64 node_name;
+	u64 port_name;
+	u64 permanent_port_name;
+	u32 supported_classes;
+	u8  supported_fc4s[FC_FC4_LIST_SIZE];
+	u32 supported_speeds;
+	u32 maxframe_size;
+	u16 max_npiv_vports;
+	char serial_number[FC_SERIAL_NUMBER_SIZE];
+	char manufacturer[FC_SERIAL_NUMBER_SIZE];
+	char model[FC_SYMBOLIC_NAME_SIZE];
+	char model_description[FC_SYMBOLIC_NAME_SIZE];
+	char hardware_version[FC_VERSION_STRING_SIZE];
+	char driver_version[FC_VERSION_STRING_SIZE];
+	char firmware_version[FC_VERSION_STRING_SIZE];
+	char optionrom_version[FC_VERSION_STRING_SIZE];
+
+	/* Dynamic Attributes */
+	u32 port_id;
+	enum fc_port_type port_type;
+	enum fc_port_state port_state;
+	u8  active_fc4s[FC_FC4_LIST_SIZE];
+	u32 speed;
+	u64 fabric_name;
+	char symbolic_name[FC_SYMBOLIC_NAME_SIZE];
+	char system_hostname[FC_SYMBOLIC_NAME_SIZE];
+	u32 dev_loss_tmo;
+
+	/* Private (Transport-managed) Attributes */
+	enum fc_tgtid_binding_type  tgtid_bind_type;
+
+	/* internal data */
+	struct list_head rports;
+	struct list_head rport_bindings;
+	struct list_head vports;
+	u32 next_rport_number;
+	u32 next_target_id;
+	u32 next_vport_number;
+	u16 npiv_vports_inuse;
+
+	/* work queues for rport state manipulation */
+	char work_q_name[20];
+	struct workqueue_struct *work_q;
+	char devloss_work_q_name[20];
+	struct workqueue_struct *devloss_work_q;
+
+	/* bsg support */
+	struct request_queue *rqst_q;
+};
+
+#define shost_to_fc_host(x) \
+	((struct fc_host_attrs *)(x)->shost_data)
+
+#define fc_host_node_name(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->node_name)
+#define fc_host_port_name(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->port_name)
+#define fc_host_permanent_port_name(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->permanent_port_name)
+#define fc_host_supported_classes(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->supported_classes)
+#define fc_host_supported_fc4s(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->supported_fc4s)
+#define fc_host_supported_speeds(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->supported_speeds)
+#define fc_host_maxframe_size(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->maxframe_size)
+#define fc_host_max_npiv_vports(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->max_npiv_vports)
+#define fc_host_serial_number(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->serial_number)
+#define fc_host_manufacturer(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->manufacturer)
+#define fc_host_model(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->model)
+#define fc_host_model_description(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->model_description)
+#define fc_host_hardware_version(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->hardware_version)
+#define fc_host_driver_version(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->driver_version)
+#define fc_host_firmware_version(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->firmware_version)
+#define fc_host_optionrom_version(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->optionrom_version)
+#define fc_host_port_id(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->port_id)
+#define fc_host_port_type(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->port_type)
+#define fc_host_port_state(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->port_state)
+#define fc_host_active_fc4s(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->active_fc4s)
+#define fc_host_speed(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->speed)
+#define fc_host_fabric_name(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->fabric_name)
+#define fc_host_symbolic_name(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->symbolic_name)
+#define fc_host_system_hostname(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->system_hostname)
+#define fc_host_tgtid_bind_type(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->tgtid_bind_type)
+#define fc_host_rports(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->rports)
+#define fc_host_rport_bindings(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->rport_bindings)
+#define fc_host_vports(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->vports)
+#define fc_host_next_rport_number(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->next_rport_number)
+#define fc_host_next_target_id(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->next_target_id)
+#define fc_host_next_vport_number(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->next_vport_number)
+#define fc_host_npiv_vports_inuse(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->npiv_vports_inuse)
+#define fc_host_work_q_name(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->work_q_name)
+#define fc_host_work_q(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->work_q)
+#define fc_host_devloss_work_q_name(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->devloss_work_q_name)
+#define fc_host_devloss_work_q(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->devloss_work_q)
+#define fc_host_dev_loss_tmo(x) \
+	(((struct fc_host_attrs *)(x)->shost_data)->dev_loss_tmo)
+
+/* The functions by which the transport class and the driver communicate */
+struct fc_function_template {
+	void    (*get_rport_dev_loss_tmo)(struct fc_rport *);
+	void	(*set_rport_dev_loss_tmo)(struct fc_rport *, u32);
+
+	void	(*get_starget_node_name)(struct scsi_target *);
+	void	(*get_starget_port_name)(struct scsi_target *);
+	void 	(*get_starget_port_id)(struct scsi_target *);
+
+	void 	(*get_host_port_id)(struct Scsi_Host *);
+	void	(*get_host_port_type)(struct Scsi_Host *);
+	void	(*get_host_port_state)(struct Scsi_Host *);
+	void	(*get_host_active_fc4s)(struct Scsi_Host *);
+	void	(*get_host_speed)(struct Scsi_Host *);
+	void	(*get_host_fabric_name)(struct Scsi_Host *);
+	void	(*get_host_symbolic_name)(struct Scsi_Host *);
+	void	(*set_host_system_hostname)(struct Scsi_Host *);
+
+	struct fc_host_statistics * (*get_fc_host_stats)(struct Scsi_Host *);
+	void	(*reset_fc_host_stats)(struct Scsi_Host *);
+
+	int	(*issue_fc_host_lip)(struct Scsi_Host *);
+
+	void    (*dev_loss_tmo_callbk)(struct fc_rport *);
+	void	(*terminate_rport_io)(struct fc_rport *);
+
+	void	(*set_vport_symbolic_name)(struct fc_vport *);
+	int  	(*vport_create)(struct fc_vport *, bool);
+	int	(*vport_disable)(struct fc_vport *, bool);
+	int  	(*vport_delete)(struct fc_vport *);
+
+	/* bsg support */
+	int	(*bsg_request)(struct bsg_job *);
+	int	(*bsg_timeout)(struct bsg_job *);
+
+	/* allocation lengths for host-specific data */
+	u32	 			dd_fcrport_size;
+	u32	 			dd_fcvport_size;
+	u32				dd_bsg_size;
+
+	/*
+	 * The driver sets these to tell the transport class it
+	 * wants the attributes displayed in sysfs.  If the show_ flag
+	 * is not set, the attribute will be private to the transport
+	 * class
+	 */
+
+	/* remote port fixed attributes */
+	unsigned long	show_rport_maxframe_size:1;
+	unsigned long	show_rport_supported_classes:1;
+	unsigned long   show_rport_dev_loss_tmo:1;
+
+	/*
+	 * target dynamic attributes
+	 * These should all be "1" if the driver uses the remote port
+	 * add/delete functions (so attributes reflect rport values).
+	 */
+	unsigned long	show_starget_node_name:1;
+	unsigned long	show_starget_port_name:1;
+	unsigned long	show_starget_port_id:1;
+
+	/* host fixed attributes */
+	unsigned long	show_host_node_name:1;
+	unsigned long	show_host_port_name:1;
+	unsigned long	show_host_permanent_port_name:1;
+	unsigned long	show_host_supported_classes:1;
+	unsigned long	show_host_supported_fc4s:1;
+	unsigned long	show_host_supported_speeds:1;
+	unsigned long	show_host_maxframe_size:1;
+	unsigned long	show_host_serial_number:1;
+	unsigned long	show_host_manufacturer:1;
+	unsigned long	show_host_model:1;
+	unsigned long	show_host_model_description:1;
+	unsigned long	show_host_hardware_version:1;
+	unsigned long	show_host_driver_version:1;
+	unsigned long	show_host_firmware_version:1;
+	unsigned long	show_host_optionrom_version:1;
+	/* host dynamic attributes */
+	unsigned long	show_host_port_id:1;
+	unsigned long	show_host_port_type:1;
+	unsigned long	show_host_port_state:1;
+	unsigned long	show_host_active_fc4s:1;
+	unsigned long	show_host_speed:1;
+	unsigned long	show_host_fabric_name:1;
+	unsigned long	show_host_symbolic_name:1;
+	unsigned long	show_host_system_hostname:1;
+
+	unsigned long	disable_target_scan:1;
+};
+
+
+/**
+ * fc_remote_port_chkready - called to validate the remote port state
+ *   prior to initiating io to the port.
+ *
+ * Returns a scsi result code that can be returned by the LLDD.
+ *
+ * @rport:	remote port to be checked
+ **/
+static inline int
+fc_remote_port_chkready(struct fc_rport *rport)
+{
+	int result;
+
+	switch (rport->port_state) {
+	case FC_PORTSTATE_ONLINE:
+		if (rport->roles & FC_PORT_ROLE_FCP_TARGET)
+			result = 0;
+		else if (rport->flags & FC_RPORT_DEVLOSS_PENDING)
+			result = DID_IMM_RETRY << 16;
+		else
+			result = DID_NO_CONNECT << 16;
+		break;
+	case FC_PORTSTATE_BLOCKED:
+		if (rport->flags & FC_RPORT_FAST_FAIL_TIMEDOUT)
+			result = DID_TRANSPORT_FAILFAST << 16;
+		else
+			result = DID_IMM_RETRY << 16;
+		break;
+	default:
+		result = DID_NO_CONNECT << 16;
+		break;
+	}
+	return result;
+}
+
+static inline u64 wwn_to_u64(u8 *wwn)
+{
+	return get_unaligned_be64(wwn);
+}
+
+static inline void u64_to_wwn(u64 inm, u8 *wwn)
+{
+	put_unaligned_be64(inm, wwn);
+}
+
+/**
+ * fc_vport_set_state() - called to set a vport's state. Saves the old state,
+ *   excepting the transitory states of initializing and sending the ELS
+ *   traffic to instantiate the vport on the link.
+ *
+ * Assumes the driver has surrounded this with the proper locking to ensure
+ * a coherent state change.
+ *
+ * @vport:	virtual port whose state is changing
+ * @new_state:  new state
+ **/
+static inline void
+fc_vport_set_state(struct fc_vport *vport, enum fc_vport_state new_state)
+{
+	if ((new_state != FC_VPORT_UNKNOWN) &&
+	    (new_state != FC_VPORT_INITIALIZING))
+		vport->vport_last_state = vport->vport_state;
+	vport->vport_state = new_state;
+}
+
+struct scsi_transport_template *fc_attach_transport(
+			struct fc_function_template *);
+void fc_release_transport(struct scsi_transport_template *);
+void fc_remove_host(struct Scsi_Host *);
+struct fc_rport *fc_remote_port_add(struct Scsi_Host *shost,
+			int channel, struct fc_rport_identifiers  *ids);
+void fc_remote_port_delete(struct fc_rport  *rport);
+void fc_remote_port_rolechg(struct fc_rport  *rport, u32 roles);
+int scsi_is_fc_rport(const struct device *);
+u32 fc_get_event_number(void);
+void fc_host_post_event(struct Scsi_Host *shost, u32 event_number,
+		enum fc_host_event_code event_code, u32 event_data);
+void fc_host_post_vendor_event(struct Scsi_Host *shost, u32 event_number,
+		u32 data_len, char * data_buf, u64 vendor_id);
+	/* Note: when specifying vendor_id to fc_host_post_vendor_event()
+	 *   be sure to read the Vendor Type and ID formatting requirements
+	 *   specified in scsi_netlink.h
+	 */
+struct fc_vport *fc_vport_create(struct Scsi_Host *shost, int channel,
+		struct fc_vport_identifiers *);
+int fc_vport_terminate(struct fc_vport *vport);
+int fc_block_rport(struct fc_rport *rport);
+int fc_block_scsi_eh(struct scsi_cmnd *cmnd);
+enum blk_eh_timer_return fc_eh_timed_out(struct scsi_cmnd *scmd);
+
+static inline struct Scsi_Host *fc_bsg_to_shost(struct bsg_job *job)
+{
+	if (scsi_is_host_device(job->dev))
+		return dev_to_shost(job->dev);
+	return rport_to_shost(dev_to_rport(job->dev));
+}
+
+static inline struct fc_rport *fc_bsg_to_rport(struct bsg_job *job)
+{
+	if (scsi_is_fc_rport(job->dev))
+		return dev_to_rport(job->dev);
+	return NULL;
+}
+
+#endif /* SCSI_TRANSPORT_FC_H */
diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h
new file mode 100644
index 000000000..484e9787d
--- /dev/null
+++ b/include/scsi/scsi_transport_iscsi.h
@@ -0,0 +1,488 @@
+/*
+ * iSCSI transport class definitions
+ *
+ * Copyright (C) IBM Corporation, 2004
+ * Copyright (C) Mike Christie, 2004 - 2006
+ * Copyright (C) Dmitry Yusupov, 2004 - 2005
+ * Copyright (C) Alex Aizman, 2004 - 2005
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#ifndef SCSI_TRANSPORT_ISCSI_H
+#define SCSI_TRANSPORT_ISCSI_H
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <scsi/iscsi_if.h>
+
+struct scsi_transport_template;
+struct iscsi_transport;
+struct iscsi_endpoint;
+struct Scsi_Host;
+struct scsi_cmnd;
+struct iscsi_cls_conn;
+struct iscsi_conn;
+struct iscsi_task;
+struct sockaddr;
+struct iscsi_iface;
+struct bsg_job;
+struct iscsi_bus_flash_session;
+struct iscsi_bus_flash_conn;
+
+/**
+ * struct iscsi_transport - iSCSI Transport template
+ *
+ * @name:		transport name
+ * @caps:		iSCSI Data-Path capabilities
+ * @create_session:	create new iSCSI session object
+ * @destroy_session:	destroy existing iSCSI session object
+ * @create_conn:	create new iSCSI connection
+ * @bind_conn:		associate this connection with existing iSCSI session
+ *			and specified transport descriptor
+ * @destroy_conn:	destroy inactive iSCSI connection
+ * @set_param:		set iSCSI parameter. Return 0 on success, -ENODATA
+ *			when param is not supported, and a -Exx value on other
+ *			error.
+ * @get_param		get iSCSI parameter. Must return number of bytes
+ *			copied to buffer on success, -ENODATA when param
+ *			is not supported, and a -Exx value on other error
+ * @start_conn:		set connection to be operational
+ * @stop_conn:		suspend/recover/terminate connection
+ * @send_pdu:		send iSCSI PDU, Login, Logout, NOP-Out, Reject, Text.
+ * @session_recovery_timedout: notify LLD a block during recovery timed out
+ * @init_task:		Initialize a iscsi_task and any internal structs.
+ *			When offloading the data path, this is called from
+ *			queuecommand with the session lock, or from the
+ *			iscsi_conn_send_pdu context with the session lock.
+ *			When not offloading the data path, this is called
+ *			from the scsi work queue without the session lock.
+ * @xmit_task		Requests LLD to transfer cmd task. Returns 0 or the
+ *			the number of bytes transferred on success, and -Exyz
+ *			value on error. When offloading the data path, this
+ *			is called from queuecommand with the session lock, or
+ *			from the iscsi_conn_send_pdu context with the session
+ *			lock. When not offloading the data path, this is called
+ *			from the scsi work queue without the session lock.
+ * @cleanup_task:	requests LLD to fail task. Called with session lock
+ *			and after the connection has been suspended and
+ *			terminated during recovery. If called
+ *			from abort task then connection is not suspended
+ *			or terminated but sk_callback_lock is held
+ *
+ * Template API provided by iSCSI Transport
+ */
+struct iscsi_transport {
+	struct module *owner;
+	char *name;
+	unsigned int caps;
+
+	struct iscsi_cls_session *(*create_session) (struct iscsi_endpoint *ep,
+					uint16_t cmds_max, uint16_t qdepth,
+					uint32_t sn);
+	void (*destroy_session) (struct iscsi_cls_session *session);
+	struct iscsi_cls_conn *(*create_conn) (struct iscsi_cls_session *sess,
+				uint32_t cid);
+	int (*bind_conn) (struct iscsi_cls_session *session,
+			  struct iscsi_cls_conn *cls_conn,
+			  uint64_t transport_eph, int is_leading);
+	int (*start_conn) (struct iscsi_cls_conn *conn);
+	void (*stop_conn) (struct iscsi_cls_conn *conn, int flag);
+	void (*destroy_conn) (struct iscsi_cls_conn *conn);
+	int (*set_param) (struct iscsi_cls_conn *conn, enum iscsi_param param,
+			  char *buf, int buflen);
+	int (*get_ep_param) (struct iscsi_endpoint *ep, enum iscsi_param param,
+			     char *buf);
+	int (*get_conn_param) (struct iscsi_cls_conn *conn,
+			       enum iscsi_param param, char *buf);
+	int (*get_session_param) (struct iscsi_cls_session *session,
+				  enum iscsi_param param, char *buf);
+	int (*get_host_param) (struct Scsi_Host *shost,
+				enum iscsi_host_param param, char *buf);
+	int (*set_host_param) (struct Scsi_Host *shost,
+			       enum iscsi_host_param param, char *buf,
+			       int buflen);
+	int (*send_pdu) (struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
+			 char *data, uint32_t data_size);
+	void (*get_stats) (struct iscsi_cls_conn *conn,
+			   struct iscsi_stats *stats);
+
+	int (*init_task) (struct iscsi_task *task);
+	int (*xmit_task) (struct iscsi_task *task);
+	void (*cleanup_task) (struct iscsi_task *task);
+
+	int (*alloc_pdu) (struct iscsi_task *task, uint8_t opcode);
+	int (*xmit_pdu) (struct iscsi_task *task);
+	int (*init_pdu) (struct iscsi_task *task, unsigned int offset,
+			 unsigned int count);
+	void (*parse_pdu_itt) (struct iscsi_conn *conn, itt_t itt,
+			       int *index, int *age);
+
+	void (*session_recovery_timedout) (struct iscsi_cls_session *session);
+	struct iscsi_endpoint *(*ep_connect) (struct Scsi_Host *shost,
+					      struct sockaddr *dst_addr,
+					      int non_blocking);
+	int (*ep_poll) (struct iscsi_endpoint *ep, int timeout_ms);
+	void (*ep_disconnect) (struct iscsi_endpoint *ep);
+	int (*tgt_dscvr) (struct Scsi_Host *shost, enum iscsi_tgt_dscvr type,
+			  uint32_t enable, struct sockaddr *dst_addr);
+	int (*set_path) (struct Scsi_Host *shost, struct iscsi_path *params);
+	int (*set_iface_param) (struct Scsi_Host *shost, void *data,
+				uint32_t len);
+	int (*get_iface_param) (struct iscsi_iface *iface,
+				enum iscsi_param_type param_type,
+				int param, char *buf);
+	umode_t (*attr_is_visible)(int param_type, int param);
+	int (*bsg_request)(struct bsg_job *job);
+	int (*send_ping) (struct Scsi_Host *shost, uint32_t iface_num,
+			  uint32_t iface_type, uint32_t payload_size,
+			  uint32_t pid, struct sockaddr *dst_addr);
+	int (*get_chap) (struct Scsi_Host *shost, uint16_t chap_tbl_idx,
+			 uint32_t *num_entries, char *buf);
+	int (*delete_chap) (struct Scsi_Host *shost, uint16_t chap_tbl_idx);
+	int (*set_chap) (struct Scsi_Host *shost, void *data, int len);
+	int (*get_flashnode_param) (struct iscsi_bus_flash_session *fnode_sess,
+				    int param, char *buf);
+	int (*set_flashnode_param) (struct iscsi_bus_flash_session *fnode_sess,
+				    struct iscsi_bus_flash_conn *fnode_conn,
+				    void *data, int len);
+	int (*new_flashnode) (struct Scsi_Host *shost, const char *buf,
+			      int len);
+	int (*del_flashnode) (struct iscsi_bus_flash_session *fnode_sess);
+	int (*login_flashnode) (struct iscsi_bus_flash_session *fnode_sess,
+				struct iscsi_bus_flash_conn *fnode_conn);
+	int (*logout_flashnode) (struct iscsi_bus_flash_session *fnode_sess,
+				 struct iscsi_bus_flash_conn *fnode_conn);
+	int (*logout_flashnode_sid) (struct iscsi_cls_session *cls_sess);
+	int (*get_host_stats) (struct Scsi_Host *shost, char *buf, int len);
+	u8 (*check_protection)(struct iscsi_task *task, sector_t *sector);
+};
+
+/*
+ * transport registration upcalls
+ */
+extern struct scsi_transport_template *iscsi_register_transport(struct iscsi_transport *tt);
+extern int iscsi_unregister_transport(struct iscsi_transport *tt);
+
+/*
+ * control plane upcalls
+ */
+extern void iscsi_conn_error_event(struct iscsi_cls_conn *conn,
+				   enum iscsi_err error);
+extern void iscsi_conn_login_event(struct iscsi_cls_conn *conn,
+				   enum iscsi_conn_state state);
+extern int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
+			  char *data, uint32_t data_size);
+
+extern int iscsi_offload_mesg(struct Scsi_Host *shost,
+			      struct iscsi_transport *transport, uint32_t type,
+			      char *data, uint16_t data_size);
+
+extern void iscsi_post_host_event(uint32_t host_no,
+				  struct iscsi_transport *transport,
+				  enum iscsi_host_event_code code,
+				  uint32_t data_size,
+				  uint8_t *data);
+
+extern void iscsi_ping_comp_event(uint32_t host_no,
+				  struct iscsi_transport *transport,
+				  uint32_t status, uint32_t pid,
+				  uint32_t data_size, uint8_t *data);
+
+struct iscsi_cls_conn {
+	struct list_head conn_list;	/* item in connlist */
+	void *dd_data;			/* LLD private data */
+	struct iscsi_transport *transport;
+	uint32_t cid;			/* connection id */
+	struct mutex ep_mutex;
+	struct iscsi_endpoint *ep;
+
+	struct device dev;		/* sysfs transport/container device */
+};
+
+#define iscsi_dev_to_conn(_dev) \
+	container_of(_dev, struct iscsi_cls_conn, dev)
+
+#define transport_class_to_conn(_cdev) \
+	iscsi_dev_to_conn(_cdev->parent)
+
+#define iscsi_conn_to_session(_conn) \
+	iscsi_dev_to_session(_conn->dev.parent)
+
+/* iscsi class session state */
+enum {
+	ISCSI_SESSION_LOGGED_IN,
+	ISCSI_SESSION_FAILED,
+	ISCSI_SESSION_FREE,
+};
+
+#define ISCSI_MAX_TARGET -1
+
+struct iscsi_cls_session {
+	struct list_head sess_list;		/* item in session_list */
+	struct iscsi_transport *transport;
+	spinlock_t lock;
+	struct work_struct block_work;
+	struct work_struct unblock_work;
+	struct work_struct scan_work;
+	struct work_struct unbind_work;
+
+	/* recovery fields */
+	int recovery_tmo;
+	bool recovery_tmo_sysfs_override;
+	struct delayed_work recovery_work;
+
+	unsigned int target_id;
+	bool ida_used;
+
+	/*
+	 * pid of userspace process that created session or -1 if
+	 * created by the kernel.
+	 */
+	pid_t creator;
+	int state;
+	int sid;				/* session id */
+	void *dd_data;				/* LLD private data */
+	struct device dev;	/* sysfs transport/container device */
+};
+
+#define iscsi_dev_to_session(_dev) \
+	container_of(_dev, struct iscsi_cls_session, dev)
+
+#define transport_class_to_session(_cdev) \
+	iscsi_dev_to_session(_cdev->parent)
+
+#define iscsi_session_to_shost(_session) \
+	dev_to_shost(_session->dev.parent)
+
+#define starget_to_session(_stgt) \
+	iscsi_dev_to_session(_stgt->dev.parent)
+
+struct iscsi_cls_host {
+	atomic_t nr_scans;
+	struct mutex mutex;
+	struct request_queue *bsg_q;
+	uint32_t port_speed;
+	uint32_t port_state;
+};
+
+#define iscsi_job_to_shost(_job) \
+        dev_to_shost(_job->dev)
+
+extern void iscsi_host_for_each_session(struct Scsi_Host *shost,
+				void (*fn)(struct iscsi_cls_session *));
+
+struct iscsi_endpoint {
+	void *dd_data;			/* LLD private data */
+	struct device dev;
+	uint64_t id;
+	struct iscsi_cls_conn *conn;
+};
+
+struct iscsi_iface {
+	struct device dev;
+	struct iscsi_transport *transport;
+	uint32_t iface_type;	/* IPv4 or IPv6 */
+	uint32_t iface_num;	/* iface number, 0 - n */
+	void *dd_data;		/* LLD private data */
+};
+
+#define iscsi_dev_to_iface(_dev) \
+	container_of(_dev, struct iscsi_iface, dev)
+
+#define iscsi_iface_to_shost(_iface) \
+	dev_to_shost(_iface->dev.parent)
+
+
+struct iscsi_bus_flash_conn {
+	struct list_head conn_list;	/* item in connlist */
+	void *dd_data;			/* LLD private data */
+	struct iscsi_transport *transport;
+	struct device dev;		/* sysfs transport/container device */
+	/* iscsi connection parameters */
+	uint32_t		exp_statsn;
+	uint32_t		statsn;
+	unsigned		max_recv_dlength; /* initiator_max_recv_dsl*/
+	unsigned		max_xmit_dlength; /* target_max_recv_dsl */
+	unsigned		max_segment_size;
+	unsigned		tcp_xmit_wsf;
+	unsigned		tcp_recv_wsf;
+	int			hdrdgst_en;
+	int			datadgst_en;
+	int			port;
+	char			*ipaddress;
+	char			*link_local_ipv6_addr;
+	char			*redirect_ipaddr;
+	uint16_t		keepalive_timeout;
+	uint16_t		local_port;
+	uint8_t			snack_req_en;
+	/* tcp timestamp negotiation status */
+	uint8_t			tcp_timestamp_stat;
+	uint8_t			tcp_nagle_disable;
+	/* tcp window scale factor */
+	uint8_t			tcp_wsf_disable;
+	uint8_t			tcp_timer_scale;
+	uint8_t			tcp_timestamp_en;
+	uint8_t			ipv4_tos;
+	uint8_t			ipv6_traffic_class;
+	uint8_t			ipv6_flow_label;
+	uint8_t			fragment_disable;
+	/* Link local IPv6 address is assigned by firmware or driver */
+	uint8_t			is_fw_assigned_ipv6;
+};
+
+#define iscsi_dev_to_flash_conn(_dev) \
+	container_of(_dev, struct iscsi_bus_flash_conn, dev)
+
+#define iscsi_flash_conn_to_flash_session(_conn) \
+	iscsi_dev_to_flash_session(_conn->dev.parent)
+
+#define ISID_SIZE 6
+
+struct iscsi_bus_flash_session {
+	struct list_head sess_list;		/* item in session_list */
+	struct iscsi_transport *transport;
+	unsigned int target_id;
+	int flash_state;	/* persistent or non-persistent */
+	void *dd_data;				/* LLD private data */
+	struct device dev;	/* sysfs transport/container device */
+	/* iscsi session parameters */
+	unsigned		first_burst;
+	unsigned		max_burst;
+	unsigned short		max_r2t;
+	int			default_taskmgmt_timeout;
+	int			initial_r2t_en;
+	int			imm_data_en;
+	int			time2wait;
+	int			time2retain;
+	int			pdu_inorder_en;
+	int			dataseq_inorder_en;
+	int			erl;
+	int			tpgt;
+	char			*username;
+	char			*username_in;
+	char			*password;
+	char			*password_in;
+	char			*targetname;
+	char			*targetalias;
+	char			*portal_type;
+	uint16_t		tsid;
+	uint16_t		chap_in_idx;
+	uint16_t		chap_out_idx;
+	/* index of iSCSI discovery session if the entry is
+	 * discovered by iSCSI discovery session
+	 */
+	uint16_t		discovery_parent_idx;
+	/* indicates if discovery was done through iSNS discovery service
+	 * or through sendTarget */
+	uint16_t		discovery_parent_type;
+	/* Firmware auto sendtarget discovery disable */
+	uint8_t			auto_snd_tgt_disable;
+	uint8_t			discovery_sess;
+	/* indicates if this flashnode entry is enabled or disabled */
+	uint8_t			entry_state;
+	uint8_t			chap_auth_en;
+	/* enables firmware to auto logout the discovery session on discovery
+	 * completion
+	 */
+	uint8_t			discovery_logout_en;
+	uint8_t			bidi_chap_en;
+	/* makes authentication for discovery session optional */
+	uint8_t			discovery_auth_optional;
+	uint8_t			isid[ISID_SIZE];
+	uint8_t			is_boot_target;
+};
+
+#define iscsi_dev_to_flash_session(_dev) \
+	container_of(_dev, struct iscsi_bus_flash_session, dev)
+
+#define iscsi_flash_session_to_shost(_session) \
+	dev_to_shost(_session->dev.parent)
+
+/*
+ * session and connection functions that can be used by HW iSCSI LLDs
+ */
+#define iscsi_cls_session_printk(prefix, _cls_session, fmt, a...) \
+	dev_printk(prefix, &(_cls_session)->dev, fmt, ##a)
+
+#define iscsi_cls_conn_printk(prefix, _cls_conn, fmt, a...) \
+	dev_printk(prefix, &(_cls_conn)->dev, fmt, ##a)
+
+extern int iscsi_session_chkready(struct iscsi_cls_session *session);
+extern int iscsi_is_session_online(struct iscsi_cls_session *session);
+extern struct iscsi_cls_session *iscsi_alloc_session(struct Scsi_Host *shost,
+				struct iscsi_transport *transport, int dd_size);
+extern int iscsi_add_session(struct iscsi_cls_session *session,
+			     unsigned int target_id);
+extern int iscsi_session_event(struct iscsi_cls_session *session,
+			       enum iscsi_uevent_e event);
+extern struct iscsi_cls_session *iscsi_create_session(struct Scsi_Host *shost,
+						struct iscsi_transport *t,
+						int dd_size,
+						unsigned int target_id);
+extern void iscsi_remove_session(struct iscsi_cls_session *session);
+extern void iscsi_free_session(struct iscsi_cls_session *session);
+extern struct iscsi_cls_conn *iscsi_create_conn(struct iscsi_cls_session *sess,
+						int dd_size, uint32_t cid);
+extern void iscsi_put_conn(struct iscsi_cls_conn *conn);
+extern void iscsi_get_conn(struct iscsi_cls_conn *conn);
+extern int iscsi_destroy_conn(struct iscsi_cls_conn *conn);
+extern void iscsi_unblock_session(struct iscsi_cls_session *session);
+extern void iscsi_block_session(struct iscsi_cls_session *session);
+extern int iscsi_scan_finished(struct Scsi_Host *shost, unsigned long time);
+extern struct iscsi_endpoint *iscsi_create_endpoint(int dd_size);
+extern void iscsi_destroy_endpoint(struct iscsi_endpoint *ep);
+extern struct iscsi_endpoint *iscsi_lookup_endpoint(u64 handle);
+extern int iscsi_block_scsi_eh(struct scsi_cmnd *cmd);
+extern struct iscsi_iface *iscsi_create_iface(struct Scsi_Host *shost,
+					      struct iscsi_transport *t,
+					      uint32_t iface_type,
+					      uint32_t iface_num, int dd_size);
+extern void iscsi_destroy_iface(struct iscsi_iface *iface);
+extern struct iscsi_iface *iscsi_lookup_iface(int handle);
+extern char *iscsi_get_port_speed_name(struct Scsi_Host *shost);
+extern char *iscsi_get_port_state_name(struct Scsi_Host *shost);
+extern int iscsi_is_session_dev(const struct device *dev);
+
+extern char *iscsi_get_discovery_parent_name(int parent_type);
+extern struct device *
+iscsi_find_flashnode(struct Scsi_Host *shost, void *data,
+		     int (*fn)(struct device *dev, void *data));
+
+extern struct iscsi_bus_flash_session *
+iscsi_create_flashnode_sess(struct Scsi_Host *shost, int index,
+			    struct iscsi_transport *transport, int dd_size);
+
+extern struct iscsi_bus_flash_conn *
+iscsi_create_flashnode_conn(struct Scsi_Host *shost,
+			    struct iscsi_bus_flash_session *fnode_sess,
+			    struct iscsi_transport *transport, int dd_size);
+
+extern void
+iscsi_destroy_flashnode_sess(struct iscsi_bus_flash_session *fnode_sess);
+
+extern void iscsi_destroy_all_flashnode(struct Scsi_Host *shost);
+extern int iscsi_flashnode_bus_match(struct device *dev,
+				     struct device_driver *drv);
+extern struct device *
+iscsi_find_flashnode_sess(struct Scsi_Host *shost, void *data,
+			  int (*fn)(struct device *dev, void *data));
+extern struct device *
+iscsi_find_flashnode_conn(struct iscsi_bus_flash_session *fnode_sess);
+
+extern char *
+iscsi_get_ipaddress_state_name(enum iscsi_ipaddress_state port_state);
+extern char *iscsi_get_router_state_name(enum iscsi_router_state router_state);
+#endif
diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h
new file mode 100644
index 000000000..05ec927a3
--- /dev/null
+++ b/include/scsi/scsi_transport_sas.h
@@ -0,0 +1,244 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef SCSI_TRANSPORT_SAS_H
+#define SCSI_TRANSPORT_SAS_H
+
+#include <linux/transport_class.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <scsi/sas.h>
+#include <linux/bsg-lib.h>
+
+struct scsi_transport_template;
+struct sas_rphy;
+struct request;
+
+#if !IS_ENABLED(CONFIG_SCSI_SAS_ATTRS)
+static inline int scsi_is_sas_rphy(const struct device *sdev)
+{
+	return 0;
+}
+#else
+extern int scsi_is_sas_rphy(const struct device *);
+#endif
+
+static inline int sas_protocol_ata(enum sas_protocol proto)
+{
+	return ((proto & SAS_PROTOCOL_SATA) ||
+		(proto & SAS_PROTOCOL_STP))? 1 : 0;
+}
+
+enum sas_linkrate {
+	/* These Values are defined in the SAS standard */
+	SAS_LINK_RATE_UNKNOWN = 0,
+	SAS_PHY_DISABLED = 1,
+	SAS_PHY_RESET_PROBLEM = 2,
+	SAS_SATA_SPINUP_HOLD = 3,
+	SAS_SATA_PORT_SELECTOR = 4,
+	SAS_PHY_RESET_IN_PROGRESS = 5,
+	SAS_LINK_RATE_1_5_GBPS = 8,
+	SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
+	SAS_LINK_RATE_3_0_GBPS = 9,
+	SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
+	SAS_LINK_RATE_6_0_GBPS = 10,
+	SAS_LINK_RATE_12_0_GBPS = 11,
+	/* These are virtual to the transport class and may never
+	 * be signalled normally since the standard defined field
+	 * is only 4 bits */
+	SAS_LINK_RATE_FAILED = 0x10,
+	SAS_PHY_VIRTUAL = 0x11,
+};
+
+struct sas_identify {
+	enum sas_device_type	device_type;
+	enum sas_protocol	initiator_port_protocols;
+	enum sas_protocol	target_port_protocols;
+	u64			sas_address;
+	u8			phy_identifier;
+};
+
+struct sas_phy {
+	struct device		dev;
+	int			number;
+	int			enabled;
+
+	/* phy identification */
+	struct sas_identify	identify;
+
+	/* phy attributes */
+	enum sas_linkrate	negotiated_linkrate;
+	enum sas_linkrate	minimum_linkrate_hw;
+	enum sas_linkrate	minimum_linkrate;
+	enum sas_linkrate	maximum_linkrate_hw;
+	enum sas_linkrate	maximum_linkrate;
+
+	/* link error statistics */
+	u32			invalid_dword_count;
+	u32			running_disparity_error_count;
+	u32			loss_of_dword_sync_count;
+	u32			phy_reset_problem_count;
+
+	/* for the list of phys belonging to a port */
+	struct list_head	port_siblings;
+
+	/* available to the lldd */
+	void			*hostdata;
+};
+
+#define dev_to_phy(d) \
+	container_of((d), struct sas_phy, dev)
+#define transport_class_to_phy(dev) \
+	dev_to_phy((dev)->parent)
+#define phy_to_shost(phy) \
+	dev_to_shost((phy)->dev.parent)
+
+struct request_queue;
+struct sas_rphy {
+	struct device		dev;
+	struct sas_identify	identify;
+	struct list_head	list;
+	struct request_queue	*q;
+	u32			scsi_target_id;
+};
+
+#define dev_to_rphy(d) \
+	container_of((d), struct sas_rphy, dev)
+#define transport_class_to_rphy(dev) \
+	dev_to_rphy((dev)->parent)
+#define rphy_to_shost(rphy) \
+	dev_to_shost((rphy)->dev.parent)
+#define target_to_rphy(targ) \
+	dev_to_rphy((targ)->dev.parent)
+
+struct sas_end_device {
+	struct sas_rphy		rphy;
+	/* flags */
+	unsigned		ready_led_meaning:1;
+	unsigned		tlr_supported:1;
+	unsigned		tlr_enabled:1;
+	/* parameters */
+	u16			I_T_nexus_loss_timeout;
+	u16			initiator_response_timeout;
+};
+#define rphy_to_end_device(r) \
+	container_of((r), struct sas_end_device, rphy)
+
+struct sas_expander_device {
+	int    level;
+	int    next_port_id;
+
+	#define SAS_EXPANDER_VENDOR_ID_LEN	8
+	char   vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1];
+	#define SAS_EXPANDER_PRODUCT_ID_LEN	16
+	char   product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1];
+	#define SAS_EXPANDER_PRODUCT_REV_LEN	4
+	char   product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1];
+	#define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN	8
+	char   component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1];
+	u16    component_id;
+	u8     component_revision_id;
+
+	struct sas_rphy		rphy;
+
+};
+#define rphy_to_expander_device(r) \
+	container_of((r), struct sas_expander_device, rphy)
+
+struct sas_port {
+	struct device		dev;
+
+	int			port_identifier;
+	int			num_phys;
+	/* port flags */
+	unsigned int		is_backlink:1;
+
+	/* the other end of the link */
+	struct sas_rphy		*rphy;
+
+	struct mutex		phy_list_mutex;
+	struct list_head	phy_list;
+	struct list_head	del_list; /* libsas only */
+};
+
+#define dev_to_sas_port(d) \
+	container_of((d), struct sas_port, dev)
+#define transport_class_to_sas_port(dev) \
+	dev_to_sas_port((dev)->parent)
+
+struct sas_phy_linkrates {
+	enum sas_linkrate maximum_linkrate;
+	enum sas_linkrate minimum_linkrate;
+};
+
+/* The functions by which the transport class and the driver communicate */
+struct sas_function_template {
+	int (*get_linkerrors)(struct sas_phy *);
+	int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
+	int (*get_bay_identifier)(struct sas_rphy *);
+	int (*phy_reset)(struct sas_phy *, int);
+	int (*phy_enable)(struct sas_phy *, int);
+	int (*phy_setup)(struct sas_phy *);
+	void (*phy_release)(struct sas_phy *);
+	int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
+	void (*smp_handler)(struct bsg_job *, struct Scsi_Host *,
+			struct sas_rphy *);
+};
+
+
+void sas_remove_children(struct device *);
+extern void sas_remove_host(struct Scsi_Host *);
+
+extern struct sas_phy *sas_phy_alloc(struct device *, int);
+extern void sas_phy_free(struct sas_phy *);
+extern int sas_phy_add(struct sas_phy *);
+extern void sas_phy_delete(struct sas_phy *);
+extern int scsi_is_sas_phy(const struct device *);
+
+u64 sas_get_address(struct scsi_device *);
+unsigned int sas_tlr_supported(struct scsi_device *);
+unsigned int sas_is_tlr_enabled(struct scsi_device *);
+void sas_disable_tlr(struct scsi_device *);
+void sas_enable_tlr(struct scsi_device *);
+
+extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
+extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
+void sas_rphy_free(struct sas_rphy *);
+extern int sas_rphy_add(struct sas_rphy *);
+extern void sas_rphy_remove(struct sas_rphy *);
+extern void sas_rphy_delete(struct sas_rphy *);
+extern void sas_rphy_unlink(struct sas_rphy *);
+
+struct sas_port *sas_port_alloc(struct device *, int);
+struct sas_port *sas_port_alloc_num(struct device *);
+int sas_port_add(struct sas_port *);
+void sas_port_free(struct sas_port *);
+void sas_port_delete(struct sas_port *);
+void sas_port_add_phy(struct sas_port *, struct sas_phy *);
+void sas_port_delete_phy(struct sas_port *, struct sas_phy *);
+void sas_port_mark_backlink(struct sas_port *);
+int scsi_is_sas_port(const struct device *);
+struct sas_phy *sas_port_get_phy(struct sas_port *port);
+static inline void sas_port_put_phy(struct sas_phy *phy)
+{
+	if (phy)
+		put_device(&phy->dev);
+}
+
+extern struct scsi_transport_template *
+sas_attach_transport(struct sas_function_template *);
+extern void sas_release_transport(struct scsi_transport_template *);
+int sas_read_port_mode_page(struct scsi_device *);
+
+static inline int
+scsi_is_sas_expander_device(struct device *dev)
+{
+	struct sas_rphy *rphy;
+	if (!scsi_is_sas_rphy(dev))
+		return 0;
+	rphy = dev_to_rphy(dev);
+	return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE ||
+		rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
+}
+
+#define scsi_is_sas_phy_local(phy)	scsi_is_host_device((phy)->dev.parent)
+
+#endif /* SCSI_TRANSPORT_SAS_H */
diff --git a/include/scsi/scsi_transport_spi.h b/include/scsi/scsi_transport_spi.h
new file mode 100644
index 000000000..a4fa52b4d
--- /dev/null
+++ b/include/scsi/scsi_transport_spi.h
@@ -0,0 +1,162 @@
+/* 
+ *  Parallel SCSI (SPI) transport specific attributes exported to sysfs.
+ *
+ *  Copyright (c) 2003 Silicon Graphics, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef SCSI_TRANSPORT_SPI_H
+#define SCSI_TRANSPORT_SPI_H
+
+#include <linux/transport_class.h>
+#include <linux/mutex.h>
+
+struct scsi_transport_template;
+struct scsi_target;
+struct scsi_device;
+struct Scsi_Host;
+
+struct spi_transport_attrs {
+	int period;		/* value in the PPR/SDTR command */
+	int min_period;
+	int offset;
+	int max_offset;
+	unsigned int width:1;	/* 0 - narrow, 1 - wide */
+	unsigned int max_width:1;
+	unsigned int iu:1;	/* Information Units enabled */
+	unsigned int max_iu:1;
+	unsigned int dt:1;	/* DT clocking enabled */
+	unsigned int qas:1;	/* Quick Arbitration and Selection enabled */
+	unsigned int max_qas:1;
+	unsigned int wr_flow:1;	/* Write Flow control enabled */
+	unsigned int rd_strm:1;	/* Read streaming enabled */
+	unsigned int rti:1;	/* Retain Training Information */
+	unsigned int pcomp_en:1;/* Precompensation enabled */
+	unsigned int hold_mcs:1;/* Hold Margin Control Settings */
+	unsigned int initial_dv:1; /* DV done to this target yet  */
+	unsigned long flags;	/* flags field for drivers to use */
+	/* Device Properties fields */
+	unsigned int support_sync:1; /* synchronous support */
+	unsigned int support_wide:1; /* wide support */
+	unsigned int support_dt:1; /* allows DT phases */
+	unsigned int support_dt_only; /* disallows ST phases */
+	unsigned int support_ius; /* support Information Units */
+	unsigned int support_qas; /* supports quick arbitration and selection */
+	/* Private Fields */
+	unsigned int dv_pending:1; /* Internal flag: DV Requested */
+	unsigned int dv_in_progress:1;	/* Internal: DV started */
+	struct mutex dv_mutex; /* semaphore to serialise dv */
+};
+
+enum spi_signal_type {
+	SPI_SIGNAL_UNKNOWN = 1,
+	SPI_SIGNAL_SE,
+	SPI_SIGNAL_LVD,
+	SPI_SIGNAL_HVD,
+};
+
+struct spi_host_attrs {
+	enum spi_signal_type signalling;
+};
+
+/* accessor functions */
+#define spi_period(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->period)
+#define spi_min_period(x) (((struct spi_transport_attrs *)&(x)->starget_data)->min_period)
+#define spi_offset(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->offset)
+#define spi_max_offset(x) (((struct spi_transport_attrs *)&(x)->starget_data)->max_offset)
+#define spi_width(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->width)
+#define spi_max_width(x) (((struct spi_transport_attrs *)&(x)->starget_data)->max_width)
+#define spi_iu(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->iu)
+#define spi_max_iu(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->max_iu)
+#define spi_dt(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->dt)
+#define spi_qas(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->qas)
+#define spi_max_qas(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->max_qas)
+#define spi_wr_flow(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->wr_flow)
+#define spi_rd_strm(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->rd_strm)
+#define spi_rti(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->rti)
+#define spi_pcomp_en(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->pcomp_en)
+#define spi_hold_mcs(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->hold_mcs)
+#define spi_initial_dv(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->initial_dv)
+#define spi_dv_pending(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_pending)
+
+#define spi_support_sync(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_sync)
+#define spi_support_wide(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_wide)
+#define spi_support_dt(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_dt)
+#define spi_support_dt_only(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_dt_only)
+#define spi_support_ius(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_ius)
+#define spi_support_qas(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->support_qas)
+
+#define spi_flags(x)	(((struct spi_transport_attrs *)&(x)->starget_data)->flags)
+#define spi_signalling(h)	(((struct spi_host_attrs *)(h)->shost_data)->signalling)
+
+
+
+/* The functions by which the transport class and the driver communicate */
+struct spi_function_template {
+	void	(*get_period)(struct scsi_target *);
+	void	(*set_period)(struct scsi_target *, int);
+	void	(*get_offset)(struct scsi_target *);
+	void	(*set_offset)(struct scsi_target *, int);
+	void	(*get_width)(struct scsi_target *);
+	void	(*set_width)(struct scsi_target *, int);
+	void	(*get_iu)(struct scsi_target *);
+	void	(*set_iu)(struct scsi_target *, int);
+	void	(*get_dt)(struct scsi_target *);
+	void	(*set_dt)(struct scsi_target *, int);
+	void	(*get_qas)(struct scsi_target *);
+	void	(*set_qas)(struct scsi_target *, int);
+	void	(*get_wr_flow)(struct scsi_target *);
+	void	(*set_wr_flow)(struct scsi_target *, int);
+	void	(*get_rd_strm)(struct scsi_target *);
+	void	(*set_rd_strm)(struct scsi_target *, int);
+	void	(*get_rti)(struct scsi_target *);
+	void	(*set_rti)(struct scsi_target *, int);
+	void	(*get_pcomp_en)(struct scsi_target *);
+	void	(*set_pcomp_en)(struct scsi_target *, int);
+	void	(*get_hold_mcs)(struct scsi_target *);
+	void	(*set_hold_mcs)(struct scsi_target *, int);
+	void	(*get_signalling)(struct Scsi_Host *);
+	void	(*set_signalling)(struct Scsi_Host *, enum spi_signal_type);
+	int	(*deny_binding)(struct scsi_target *);
+	/* The driver sets these to tell the transport class it
+	 * wants the attributes displayed in sysfs.  If the show_ flag
+	 * is not set, the attribute will be private to the transport
+	 * class */
+	unsigned long	show_period:1;
+	unsigned long	show_offset:1;
+	unsigned long	show_width:1;
+	unsigned long	show_iu:1;
+	unsigned long	show_dt:1;
+	unsigned long	show_qas:1;
+	unsigned long	show_wr_flow:1;
+	unsigned long	show_rd_strm:1;
+	unsigned long	show_rti:1;
+	unsigned long	show_pcomp_en:1;
+	unsigned long	show_hold_mcs:1;
+};
+
+struct scsi_transport_template *spi_attach_transport(struct spi_function_template *);
+void spi_release_transport(struct scsi_transport_template *);
+void spi_schedule_dv_device(struct scsi_device *);
+void spi_dv_device(struct scsi_device *);
+void spi_display_xfer_agreement(struct scsi_target *);
+int spi_print_msg(const unsigned char *);
+int spi_populate_width_msg(unsigned char *msg, int width);
+int spi_populate_sync_msg(unsigned char *msg, int period, int offset);
+int spi_populate_ppr_msg(unsigned char *msg, int period, int offset, int width,
+		int options);
+int spi_populate_tag_msg(unsigned char *msg, struct scsi_cmnd *cmd);
+
+#endif /* SCSI_TRANSPORT_SPI_H */
diff --git a/include/scsi/scsi_transport_srp.h b/include/scsi/scsi_transport_srp.h
new file mode 100644
index 000000000..d22df1258
--- /dev/null
+++ b/include/scsi/scsi_transport_srp.h
@@ -0,0 +1,145 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef SCSI_TRANSPORT_SRP_H
+#define SCSI_TRANSPORT_SRP_H
+
+#include <linux/transport_class.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+
+#define SRP_RPORT_ROLE_INITIATOR 0
+#define SRP_RPORT_ROLE_TARGET 1
+
+struct srp_rport_identifiers {
+	u8 port_id[16];
+	u8 roles;
+};
+
+/**
+ * enum srp_rport_state - SRP transport layer state
+ * @SRP_RPORT_RUNNING:   Transport layer operational.
+ * @SRP_RPORT_BLOCKED:   Transport layer not operational; fast I/O fail timer
+ *                       is running and I/O has been blocked.
+ * @SRP_RPORT_FAIL_FAST: Fast I/O fail timer has expired; fail I/O fast.
+ * @SRP_RPORT_LOST:      Port is being removed.
+ */
+enum srp_rport_state {
+	SRP_RPORT_RUNNING,
+	SRP_RPORT_BLOCKED,
+	SRP_RPORT_FAIL_FAST,
+	SRP_RPORT_LOST,
+};
+
+/**
+ * struct srp_rport - SRP initiator or target port
+ *
+ * Fields that are relevant for SRP initiator and SRP target drivers:
+ * @dev:               Device associated with this rport.
+ * @port_id:           16-byte port identifier.
+ * @roles:             Role of this port - initiator or target.
+ *
+ * Fields that are only relevant for SRP initiator drivers:
+ * @lld_data:          LLD private data.
+ * @mutex:             Protects against concurrent rport reconnect /
+ *                     fast_io_fail / dev_loss_tmo activity.
+ * @state:             rport state.
+ * @reconnect_delay:   Reconnect delay in seconds.
+ * @failed_reconnects: Number of failed reconnect attempts.
+ * @reconnect_work:    Work structure used for scheduling reconnect attempts.
+ * @fast_io_fail_tmo:  Fast I/O fail timeout in seconds.
+ * @dev_loss_tmo:      Device loss timeout in seconds.
+ * @fast_io_fail_work: Work structure used for scheduling fast I/O fail work.
+ * @dev_loss_work:     Work structure used for scheduling device loss work.
+ */
+struct srp_rport {
+	/* for initiator and target drivers */
+
+	struct device dev;
+
+	u8 port_id[16];
+	u8 roles;
+
+	/* for initiator drivers */
+
+	void			*lld_data;
+
+	struct mutex		mutex;
+	enum srp_rport_state	state;
+	int			reconnect_delay;
+	int			failed_reconnects;
+	struct delayed_work	reconnect_work;
+	int			fast_io_fail_tmo;
+	int			dev_loss_tmo;
+	struct delayed_work	fast_io_fail_work;
+	struct delayed_work	dev_loss_work;
+};
+
+/**
+ * struct srp_function_template
+ *
+ * Fields that are only relevant for SRP initiator drivers:
+ * @has_rport_state: Whether or not to create the state, fast_io_fail_tmo and
+ *     dev_loss_tmo sysfs attribute for an rport.
+ * @reset_timer_if_blocked: Whether or srp_timed_out() should reset the command
+ *     timer if the device on which it has been queued is blocked.
+ * @reconnect_delay: If not NULL, points to the default reconnect_delay value.
+ * @fast_io_fail_tmo: If not NULL, points to the default fast_io_fail_tmo value.
+ * @dev_loss_tmo: If not NULL, points to the default dev_loss_tmo value.
+ * @reconnect: Callback function for reconnecting to the target. See also
+ *     srp_reconnect_rport().
+ * @terminate_rport_io: Callback function for terminating all outstanding I/O
+ *     requests for an rport.
+ * @rport_delete: Callback function that deletes an rport.
+ */
+struct srp_function_template {
+	/* for initiator drivers */
+	bool has_rport_state;
+	bool reset_timer_if_blocked;
+	int *reconnect_delay;
+	int *fast_io_fail_tmo;
+	int *dev_loss_tmo;
+	int (*reconnect)(struct srp_rport *rport);
+	void (*terminate_rport_io)(struct srp_rport *rport);
+	void (*rport_delete)(struct srp_rport *rport);
+};
+
+extern struct scsi_transport_template *
+srp_attach_transport(struct srp_function_template *);
+extern void srp_release_transport(struct scsi_transport_template *);
+
+extern void srp_rport_get(struct srp_rport *rport);
+extern void srp_rport_put(struct srp_rport *rport);
+extern struct srp_rport *srp_rport_add(struct Scsi_Host *,
+				       struct srp_rport_identifiers *);
+extern void srp_rport_del(struct srp_rport *);
+extern int srp_tmo_valid(int reconnect_delay, int fast_io_fail_tmo,
+			 long dev_loss_tmo);
+int srp_parse_tmo(int *tmo, const char *buf);
+extern int srp_reconnect_rport(struct srp_rport *rport);
+extern void srp_start_tl_fail_timers(struct srp_rport *rport);
+extern void srp_remove_host(struct Scsi_Host *);
+extern void srp_stop_rport_timers(struct srp_rport *rport);
+enum blk_eh_timer_return srp_timed_out(struct scsi_cmnd *scmd);
+
+/**
+ * srp_chkready() - evaluate the transport layer state before I/O
+ * @rport: SRP target port pointer.
+ *
+ * Returns a SCSI result code that can be returned by the LLD queuecommand()
+ * implementation. The role of this function is similar to that of
+ * fc_remote_port_chkready().
+ */
+static inline int srp_chkready(struct srp_rport *rport)
+{
+	switch (rport->state) {
+	case SRP_RPORT_RUNNING:
+	case SRP_RPORT_BLOCKED:
+	default:
+		return 0;
+	case SRP_RPORT_FAIL_FAST:
+		return DID_TRANSPORT_FAILFAST << 16;
+	case SRP_RPORT_LOST:
+		return DID_NO_CONNECT << 16;
+	}
+}
+
+#endif
diff --git a/include/scsi/scsicam.h b/include/scsi/scsicam.h
new file mode 100644
index 000000000..57c729254
--- /dev/null
+++ b/include/scsi/scsicam.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * scsicam.h - SCSI CAM support functions, use for HDIO_GETGEO, etc.
+ *
+ * Copyright 1993, 1994 Drew Eckhardt
+ *      Visionary Computing 
+ *      (Unix and Linux consulting and custom programming)
+ *      drew@Colorado.EDU
+ *	+1 (303) 786-7975
+ *
+ * For more information, please consult the SCSI-CAM draft.
+ */
+
+#ifndef SCSICAM_H
+#define SCSICAM_H
+extern int scsicam_bios_param (struct block_device *bdev, sector_t capacity, int *ip);
+extern int scsi_partsize(unsigned char *buf, unsigned long capacity,
+           unsigned int  *cyls, unsigned int *hds, unsigned int *secs);
+extern unsigned char *scsi_bios_ptable(struct block_device *bdev);
+#endif /* def SCSICAM_H */
diff --git a/include/scsi/sg.h b/include/scsi/sg.h
new file mode 100644
index 000000000..f91bcca60
--- /dev/null
+++ b/include/scsi/sg.h
@@ -0,0 +1,274 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _SCSI_GENERIC_H
+#define _SCSI_GENERIC_H
+
+#include <linux/compiler.h>
+
+/*
+ * History:
+ *  Started: Aug 9 by Lawrence Foard (entropy@world.std.com), to allow user
+ *   process control of SCSI devices.
+ *  Development Sponsored by Killy Corp. NY NY
+ *
+ * Original driver (sg.h):
+ *       Copyright (C) 1992 Lawrence Foard
+ * Version 2 and 3 extensions to driver:
+ *	Copyright (C) 1998 - 2014 Douglas Gilbert
+ *
+ *  Version: 3.5.36 (20140603)
+ *  This version is for 2.6 and 3 series kernels.
+ *
+ * Documentation
+ * =============
+ * A web site for the SG device driver can be found at:
+ *	http://sg.danny.cz/sg  [alternatively check the MAINTAINERS file]
+ * The documentation for the sg version 3 driver can be found at:
+ *	http://sg.danny.cz/sg/p/sg_v3_ho.html
+ * Also see: <kernel_source>/Documentation/scsi/scsi-generic.txt
+ *
+ * For utility and test programs see: http://sg.danny.cz/sg/sg3_utils.html
+ */
+
+#ifdef __KERNEL__
+extern int sg_big_buff; /* for sysctl */
+#endif
+
+
+typedef struct sg_iovec /* same structure as used by readv() Linux system */
+{                       /* call. It defines one scatter-gather element. */
+    void __user *iov_base;      /* Starting address  */
+    size_t iov_len;             /* Length in bytes  */
+} sg_iovec_t;
+
+
+typedef struct sg_io_hdr
+{
+    int interface_id;           /* [i] 'S' for SCSI generic (required) */
+    int dxfer_direction;        /* [i] data transfer direction  */
+    unsigned char cmd_len;      /* [i] SCSI command length */
+    unsigned char mx_sb_len;    /* [i] max length to write to sbp */
+    unsigned short iovec_count; /* [i] 0 implies no scatter gather */
+    unsigned int dxfer_len;     /* [i] byte count of data transfer */
+    void __user *dxferp;	/* [i], [*io] points to data transfer memory
+					      or scatter gather list */
+    unsigned char __user *cmdp; /* [i], [*i] points to command to perform */
+    void __user *sbp;		/* [i], [*o] points to sense_buffer memory */
+    unsigned int timeout;       /* [i] MAX_UINT->no timeout (unit: millisec) */
+    unsigned int flags;         /* [i] 0 -> default, see SG_FLAG... */
+    int pack_id;                /* [i->o] unused internally (normally) */
+    void __user * usr_ptr;      /* [i->o] unused internally */
+    unsigned char status;       /* [o] scsi status */
+    unsigned char masked_status;/* [o] shifted, masked scsi status */
+    unsigned char msg_status;   /* [o] messaging level data (optional) */
+    unsigned char sb_len_wr;    /* [o] byte count actually written to sbp */
+    unsigned short host_status; /* [o] errors from host adapter */
+    unsigned short driver_status;/* [o] errors from software driver */
+    int resid;                  /* [o] dxfer_len - actual_transferred */
+    unsigned int duration;      /* [o] time taken by cmd (unit: millisec) */
+    unsigned int info;          /* [o] auxiliary information */
+} sg_io_hdr_t;  /* 64 bytes long (on i386) */
+
+#define SG_INTERFACE_ID_ORIG 'S'
+
+/* Use negative values to flag difference from original sg_header structure */
+#define SG_DXFER_NONE (-1)      /* e.g. a SCSI Test Unit Ready command */
+#define SG_DXFER_TO_DEV (-2)    /* e.g. a SCSI WRITE command */
+#define SG_DXFER_FROM_DEV (-3)  /* e.g. a SCSI READ command */
+#define SG_DXFER_TO_FROM_DEV (-4) /* treated like SG_DXFER_FROM_DEV with the
+				   additional property than during indirect
+				   IO the user buffer is copied into the
+				   kernel buffers before the transfer */
+#define SG_DXFER_UNKNOWN (-5)   /* Unknown data direction */
+
+/* following flag values can be "or"-ed together */
+#define SG_FLAG_DIRECT_IO 1     /* default is indirect IO */
+#define SG_FLAG_UNUSED_LUN_INHIBIT 2   /* default is overwrite lun in SCSI */
+				/* command block (when <= SCSI_2) */
+#define SG_FLAG_MMAP_IO 4       /* request memory mapped IO */
+#define SG_FLAG_NO_DXFER 0x10000 /* no transfer of kernel buffers to/from */
+				/* user space (debug indirect IO) */
+/* defaults:: for sg driver: Q_AT_HEAD; for block layer: Q_AT_TAIL */
+#define SG_FLAG_Q_AT_TAIL 0x10
+#define SG_FLAG_Q_AT_HEAD 0x20
+
+/* following 'info' values are "or"-ed together */
+#define SG_INFO_OK_MASK 0x1
+#define SG_INFO_OK 0x0          /* no sense, host nor driver "noise" */
+#define SG_INFO_CHECK 0x1       /* something abnormal happened */
+
+#define SG_INFO_DIRECT_IO_MASK 0x6
+#define SG_INFO_INDIRECT_IO 0x0 /* data xfer via kernel buffers (or no xfer) */
+#define SG_INFO_DIRECT_IO 0x2   /* direct IO requested and performed */
+#define SG_INFO_MIXED_IO 0x4    /* part direct, part indirect IO */
+
+
+typedef struct sg_scsi_id { /* used by SG_GET_SCSI_ID ioctl() */
+    int host_no;        /* as in "scsi<n>" where 'n' is one of 0, 1, 2 etc */
+    int channel;
+    int scsi_id;        /* scsi id of target device */
+    int lun;
+    int scsi_type;      /* TYPE_... defined in scsi/scsi.h */
+    short h_cmd_per_lun;/* host (adapter) maximum commands per lun */
+    short d_queue_depth;/* device (or adapter) maximum queue length */
+    int unused[2];      /* probably find a good use, set 0 for now */
+} sg_scsi_id_t; /* 32 bytes long on i386 */
+
+typedef struct sg_req_info { /* used by SG_GET_REQUEST_TABLE ioctl() */
+    char req_state;     /* 0 -> not used, 1 -> written, 2 -> ready to read */
+    char orphan;        /* 0 -> normal request, 1 -> from interruped SG_IO */
+    char sg_io_owned;   /* 0 -> complete with read(), 1 -> owned by SG_IO */
+    char problem;       /* 0 -> no problem detected, 1 -> error to report */
+    int pack_id;        /* pack_id associated with request */
+    void __user *usr_ptr;     /* user provided pointer (in new interface) */
+    unsigned int duration; /* millisecs elapsed since written (req_state==1)
+			      or request duration (req_state==2) */
+    int unused;
+} sg_req_info_t; /* 20 bytes long on i386 */
+
+
+/* IOCTLs: Those ioctls that are relevant to the SG 3.x drivers follow.
+ [Those that only apply to the SG 2.x drivers are at the end of the file.]
+ (_GET_s yield result via 'int *' 3rd argument unless otherwise indicated) */
+
+#define SG_EMULATED_HOST 0x2203 /* true for emulated host adapter (ATAPI) */
+
+/* Used to configure SCSI command transformation layer for ATAPI devices */
+/* Only supported by the ide-scsi driver */
+#define SG_SET_TRANSFORM 0x2204 /* N.B. 3rd arg is not pointer but value: */
+		      /* 3rd arg = 0 to disable transform, 1 to enable it */
+#define SG_GET_TRANSFORM 0x2205
+
+#define SG_SET_RESERVED_SIZE 0x2275  /* request a new reserved buffer size */
+#define SG_GET_RESERVED_SIZE 0x2272  /* actual size of reserved buffer */
+
+/* The following ioctl has a 'sg_scsi_id_t *' object as its 3rd argument. */
+#define SG_GET_SCSI_ID 0x2276   /* Yields fd's bus, chan, dev, lun + type */
+/* SCSI id information can also be obtained from SCSI_IOCTL_GET_IDLUN */
+
+/* Override host setting and always DMA using low memory ( <16MB on i386) */
+#define SG_SET_FORCE_LOW_DMA 0x2279  /* 0-> use adapter setting, 1-> force */
+#define SG_GET_LOW_DMA 0x227a   /* 0-> use all ram for dma; 1-> low dma ram */
+
+/* When SG_SET_FORCE_PACK_ID set to 1, pack_id is input to read() which
+   tries to fetch a packet with a matching pack_id, waits, or returns EAGAIN.
+   If pack_id is -1 then read oldest waiting. When ...FORCE_PACK_ID set to 0
+   then pack_id ignored by read() and oldest readable fetched. */
+#define SG_SET_FORCE_PACK_ID 0x227b
+#define SG_GET_PACK_ID 0x227c /* Yields oldest readable pack_id (or -1) */
+
+#define SG_GET_NUM_WAITING 0x227d /* Number of commands awaiting read() */
+
+/* Yields max scatter gather tablesize allowed by current host adapter */
+#define SG_GET_SG_TABLESIZE 0x227F  /* 0 implies can't do scatter gather */
+
+#define SG_GET_VERSION_NUM 0x2282 /* Example: version 2.1.34 yields 20134 */
+
+/* Returns -EBUSY if occupied. 3rd argument pointer to int (see next) */
+#define SG_SCSI_RESET 0x2284
+/* Associated values that can be given to SG_SCSI_RESET follow.
+ * SG_SCSI_RESET_NO_ESCALATE may be OR-ed to the _DEVICE, _TARGET, _BUS
+ * or _HOST reset value so only that action is attempted. */
+#define		SG_SCSI_RESET_NOTHING	0
+#define		SG_SCSI_RESET_DEVICE	1
+#define		SG_SCSI_RESET_BUS	2
+#define		SG_SCSI_RESET_HOST	3
+#define		SG_SCSI_RESET_TARGET	4
+#define		SG_SCSI_RESET_NO_ESCALATE	0x100
+
+/* synchronous SCSI command ioctl, (only in version 3 interface) */
+#define SG_IO 0x2285   /* similar effect as write() followed by read() */
+
+#define SG_GET_REQUEST_TABLE 0x2286   /* yields table of active requests */
+
+/* How to treat EINTR during SG_IO ioctl(), only in SG 3.x series */
+#define SG_SET_KEEP_ORPHAN 0x2287 /* 1 -> hold for read(), 0 -> drop (def) */
+#define SG_GET_KEEP_ORPHAN 0x2288
+
+/* yields scsi midlevel's access_count for this SCSI device */
+#define SG_GET_ACCESS_COUNT 0x2289  
+
+
+#define SG_SCATTER_SZ (8 * 4096)
+/* Largest size (in bytes) a single scatter-gather list element can have.
+   The value used by the driver is 'max(SG_SCATTER_SZ, PAGE_SIZE)'.
+   This value should be a power of 2 (and may be rounded up internally).
+   If scatter-gather is not supported by adapter then this value is the
+   largest data block that can be read/written by a single scsi command. */
+
+#define SG_DEFAULT_RETRIES 0
+
+/* Defaults, commented if they differ from original sg driver */
+#define SG_DEF_FORCE_PACK_ID 0
+#define SG_DEF_KEEP_ORPHAN 0
+#define SG_DEF_RESERVED_SIZE SG_SCATTER_SZ /* load time option */
+
+/* maximum outstanding requests, write() yields EDOM if exceeded */
+#define SG_MAX_QUEUE 16
+
+#define SG_BIG_BUFF SG_DEF_RESERVED_SIZE    /* for backward compatibility */
+
+/* Alternate style type names, "..._t" variants preferred */
+typedef struct sg_io_hdr Sg_io_hdr;
+typedef struct sg_io_vec Sg_io_vec;
+typedef struct sg_scsi_id Sg_scsi_id;
+typedef struct sg_req_info Sg_req_info;
+
+
+/* vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv */
+/*   The older SG interface based on the 'sg_header' structure follows.   */
+/* ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ */
+
+#define SG_MAX_SENSE 16   /* this only applies to the sg_header interface */
+
+struct sg_header
+{
+    int pack_len;    /* [o] reply_len (ie useless), ignored as input */
+    int reply_len;   /* [i] max length of expected reply (inc. sg_header) */
+    int pack_id;     /* [io] id number of packet (use ints >= 0) */
+    int result;      /* [o] 0==ok, else (+ve) Unix errno (best ignored) */
+    unsigned int twelve_byte:1;
+	/* [i] Force 12 byte command length for group 6 & 7 commands  */
+    unsigned int target_status:5;   /* [o] scsi status from target */
+    unsigned int host_status:8;     /* [o] host status (see "DID" codes) */
+    unsigned int driver_status:8;   /* [o] driver status+suggestion */
+    unsigned int other_flags:10;    /* unused */
+    unsigned char sense_buffer[SG_MAX_SENSE]; /* [o] Output in 3 cases:
+	   when target_status is CHECK_CONDITION or
+	   when target_status is COMMAND_TERMINATED or
+	   when (driver_status & DRIVER_SENSE) is true. */
+};      /* This structure is 36 bytes long on i386 */
+
+
+/* IOCTLs: The following are not required (or ignored) when the sg_io_hdr_t
+	   interface is used. They are kept for backward compatibility with
+	   the original and version 2 drivers. */
+
+#define SG_SET_TIMEOUT 0x2201  /* unit: jiffies (10ms on i386) */
+#define SG_GET_TIMEOUT 0x2202  /* yield timeout as _return_ value */
+
+/* Get/set command queuing state per fd (default is SG_DEF_COMMAND_Q.
+   Each time a sg_io_hdr_t object is seen on this file descriptor, this
+   command queuing flag is set on (overriding the previous setting). */
+#define SG_GET_COMMAND_Q 0x2270   /* Yields 0 (queuing off) or 1 (on) */
+#define SG_SET_COMMAND_Q 0x2271   /* Change queuing state with 0 or 1 */
+
+/* Turn on/off error sense trace (1 and 0 respectively, default is off).
+   Try using: "# cat /proc/scsi/sg/debug" instead in the v3 driver */
+#define SG_SET_DEBUG 0x227e    /* 0 -> turn off debug */
+
+#define SG_NEXT_CMD_LEN 0x2283  /* override SCSI command length with given
+		   number on the next write() on this file descriptor */
+
+
+/* Defaults, commented if they differ from original sg driver */
+#ifdef __KERNEL__
+#define SG_DEFAULT_TIMEOUT_USER	(60*USER_HZ) /* HZ == 'jiffies in 1 second' */
+#else
+#define SG_DEFAULT_TIMEOUT	(60*HZ)	     /* HZ == 'jiffies in 1 second' */
+#endif
+
+#define SG_DEF_COMMAND_Q 0     /* command queuing is always on when
+				  the new interface is used */
+#define SG_DEF_UNDERRUN_FLAG 0
+
+#endif
diff --git a/include/scsi/srp.h b/include/scsi/srp.h
new file mode 100644
index 000000000..c16a3c9a4
--- /dev/null
+++ b/include/scsi/srp.h
@@ -0,0 +1,298 @@
+/*
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef SCSI_SRP_H
+#define SCSI_SRP_H
+
+/*
+ * Structures and constants for the SCSI RDMA Protocol (SRP) as
+ * defined by the INCITS T10 committee.  This file was written using
+ * draft Revision 16a of the SRP standard.
+ */
+
+#include <linux/types.h>
+#include <scsi/scsi.h>
+
+enum {
+	SRP_LOGIN_REQ	= 0x00,
+	SRP_TSK_MGMT	= 0x01,
+	SRP_CMD		= 0x02,
+	SRP_I_LOGOUT	= 0x03,
+	SRP_LOGIN_RSP	= 0xc0,
+	SRP_RSP		= 0xc1,
+	SRP_LOGIN_REJ	= 0xc2,
+	SRP_T_LOGOUT	= 0x80,
+	SRP_CRED_REQ	= 0x81,
+	SRP_AER_REQ	= 0x82,
+	SRP_CRED_RSP	= 0x41,
+	SRP_AER_RSP	= 0x42
+};
+
+enum {
+	SRP_BUF_FORMAT_DIRECT	= 1 << 1,
+	SRP_BUF_FORMAT_INDIRECT	= 1 << 2
+};
+
+enum {
+	SRP_NO_DATA_DESC	= 0,
+	SRP_DATA_DESC_DIRECT	= 1,
+	SRP_DATA_DESC_INDIRECT	= 2
+};
+
+enum {
+	SRP_TSK_ABORT_TASK	= 0x01,
+	SRP_TSK_ABORT_TASK_SET	= 0x02,
+	SRP_TSK_CLEAR_TASK_SET	= 0x04,
+	SRP_TSK_LUN_RESET	= 0x08,
+	SRP_TSK_CLEAR_ACA	= 0x40
+};
+
+enum srp_login_rej_reason {
+	SRP_LOGIN_REJ_UNABLE_ESTABLISH_CHANNEL		= 0x00010000,
+	SRP_LOGIN_REJ_INSUFFICIENT_RESOURCES		= 0x00010001,
+	SRP_LOGIN_REJ_REQ_IT_IU_LENGTH_TOO_LARGE	= 0x00010002,
+	SRP_LOGIN_REJ_UNABLE_ASSOCIATE_CHANNEL		= 0x00010003,
+	SRP_LOGIN_REJ_UNSUPPORTED_DESCRIPTOR_FMT	= 0x00010004,
+	SRP_LOGIN_REJ_MULTI_CHANNEL_UNSUPPORTED		= 0x00010005,
+	SRP_LOGIN_REJ_CHANNEL_LIMIT_REACHED		= 0x00010006
+};
+
+enum {
+	SRP_REV10_IB_IO_CLASS	= 0xff00,
+	SRP_REV16A_IB_IO_CLASS	= 0x0100
+};
+
+struct srp_direct_buf {
+	__be64	va;
+	__be32	key;
+	__be32  len;
+};
+
+/*
+ * We need the packed attribute because the SRP spec puts the list of
+ * descriptors at an offset of 20, which is not aligned to the size of
+ * struct srp_direct_buf.  The whole structure must be packed to avoid
+ * having the 20-byte structure padded to 24 bytes on 64-bit architectures.
+ */
+struct srp_indirect_buf {
+	struct srp_direct_buf	table_desc;
+	__be32			len;
+	struct srp_direct_buf	desc_list[0];
+} __attribute__((packed));
+
+enum {
+	SRP_MULTICHAN_SINGLE = 0,
+	SRP_MULTICHAN_MULTI  = 1
+};
+
+struct srp_login_req {
+	u8	opcode;
+	u8	reserved1[7];
+	u64	tag;
+	__be32	req_it_iu_len;
+	u8	reserved2[4];
+	__be16	req_buf_fmt;
+	u8	req_flags;
+	u8	reserved3[5];
+	u8	initiator_port_id[16];
+	u8	target_port_id[16];
+};
+
+/**
+ * struct srp_login_req_rdma - RDMA/CM login parameters.
+ *
+ * RDMA/CM over InfiniBand can only carry 92 - 36 = 56 bytes of private
+ * data. The %srp_login_req_rdma structure contains the same information as
+ * %srp_login_req but with the reserved data removed.
+ */
+struct srp_login_req_rdma {
+	u64	tag;
+	__be16	req_buf_fmt;
+	u8	req_flags;
+	u8	opcode;
+	__be32	req_it_iu_len;
+	u8	initiator_port_id[16];
+	u8	target_port_id[16];
+};
+
+/*
+ * The SRP spec defines the size of the LOGIN_RSP structure to be 52
+ * bytes, so it needs to be packed to avoid having it padded to 56
+ * bytes on 64-bit architectures.
+ */
+struct srp_login_rsp {
+	u8	opcode;
+	u8	reserved1[3];
+	__be32	req_lim_delta;
+	u64	tag;
+	__be32	max_it_iu_len;
+	__be32	max_ti_iu_len;
+	__be16	buf_fmt;
+	u8	rsp_flags;
+	u8	reserved2[25];
+} __attribute__((packed));
+
+struct srp_login_rej {
+	u8	opcode;
+	u8	reserved1[3];
+	__be32	reason;
+	u64	tag;
+	u8	reserved2[8];
+	__be16	buf_fmt;
+	u8	reserved3[6];
+};
+
+struct srp_i_logout {
+	u8	opcode;
+	u8	reserved[7];
+	u64	tag;
+};
+
+struct srp_t_logout {
+	u8	opcode;
+	u8	sol_not;
+	u8	reserved[2];
+	__be32	reason;
+	u64	tag;
+};
+
+/*
+ * We need the packed attribute because the SRP spec only aligns the
+ * 8-byte LUN field to 4 bytes.
+ */
+struct srp_tsk_mgmt {
+	u8	opcode;
+	u8	sol_not;
+	u8	reserved1[6];
+	u64	tag;
+	u8	reserved2[4];
+	struct scsi_lun	lun;
+	u8	reserved3[2];
+	u8	tsk_mgmt_func;
+	u8	reserved4;
+	u64	task_tag;
+	u8	reserved5[8];
+};
+
+/*
+ * We need the packed attribute because the SRP spec only aligns the
+ * 8-byte LUN field to 4 bytes.
+ */
+struct srp_cmd {
+	u8	opcode;
+	u8	sol_not;
+	u8	reserved1[3];
+	u8	buf_fmt;
+	u8	data_out_desc_cnt;
+	u8	data_in_desc_cnt;
+	u64	tag;
+	u8	reserved2[4];
+	struct scsi_lun	lun;
+	u8	reserved3;
+	u8	task_attr;
+	u8	reserved4;
+	u8	add_cdb_len;
+	u8	cdb[16];
+	u8	add_data[0];
+};
+
+enum {
+	SRP_RSP_FLAG_RSPVALID = 1 << 0,
+	SRP_RSP_FLAG_SNSVALID = 1 << 1,
+	SRP_RSP_FLAG_DOOVER   = 1 << 2,
+	SRP_RSP_FLAG_DOUNDER  = 1 << 3,
+	SRP_RSP_FLAG_DIOVER   = 1 << 4,
+	SRP_RSP_FLAG_DIUNDER  = 1 << 5
+};
+
+/*
+ * The SRP spec defines the size of the RSP structure to be 36 bytes,
+ * so it needs to be packed to avoid having it padded to 40 bytes on
+ * 64-bit architectures.
+ */
+struct srp_rsp {
+	u8	opcode;
+	u8	sol_not;
+	u8	reserved1[2];
+	__be32	req_lim_delta;
+	u64	tag;
+	u8	reserved2[2];
+	u8	flags;
+	u8	status;
+	__be32	data_out_res_cnt;
+	__be32	data_in_res_cnt;
+	__be32	sense_data_len;
+	__be32	resp_data_len;
+	u8	data[0];
+} __attribute__((packed));
+
+struct srp_cred_req {
+	u8	opcode;
+	u8	sol_not;
+	u8	reserved[2];
+	__be32	req_lim_delta;
+	u64	tag;
+};
+
+struct srp_cred_rsp {
+	u8	opcode;
+	u8	reserved[7];
+	u64	tag;
+};
+
+/*
+ * The SRP spec defines the fixed portion of the AER_REQ structure to be
+ * 36 bytes, so it needs to be packed to avoid having it padded to 40 bytes
+ * on 64-bit architectures.
+ */
+struct srp_aer_req {
+	u8	opcode;
+	u8	sol_not;
+	u8	reserved[2];
+	__be32	req_lim_delta;
+	u64	tag;
+	u32	reserved2;
+	struct scsi_lun	lun;
+	__be32	sense_data_len;
+	u32	reserved3;
+	u8	sense_data[0];
+} __attribute__((packed));
+
+struct srp_aer_rsp {
+	u8	opcode;
+	u8	reserved[7];
+	u64	tag;
+};
+
+#endif /* SCSI_SRP_H */
diff --git a/include/scsi/viosrp.h b/include/scsi/viosrp.h
new file mode 100644
index 000000000..974e07bd8
--- /dev/null
+++ b/include/scsi/viosrp.h
@@ -0,0 +1,220 @@
+/*****************************************************************************/
+/* srp.h -- SCSI RDMA Protocol definitions                                   */
+/*                                                                           */
+/* Written By: Colin Devilbis, IBM Corporation                               */
+/*                                                                           */
+/* Copyright (C) 2003 IBM Corporation                                        */
+/*                                                                           */
+/* This program is free software; you can redistribute it and/or modify      */
+/* it under the terms of the GNU General Public License as published by      */
+/* the Free Software Foundation; either version 2 of the License, or         */
+/* (at your option) any later version.                                       */
+/*                                                                           */
+/* This program is distributed in the hope that it will be useful,           */
+/* but WITHOUT ANY WARRANTY; without even the implied warranty of            */
+/* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the             */
+/* GNU General Public License for more details.                              */
+/*                                                                           */
+/* This file contains structures and definitions for IBM RPA (RS/6000        */
+/* platform architecture) implementation of the SRP (SCSI RDMA Protocol)     */
+/* standard.  SRP is used on IBM iSeries and pSeries platforms to send SCSI  */
+/* commands between logical partitions.                                      */
+/*                                                                           */
+/* SRP Information Units (IUs) are sent on a "Command/Response Queue" (CRQ)  */
+/* between partitions.  The definitions in this file are architected,        */
+/* and cannot be changed without breaking compatibility with other versions  */
+/* of Linux and other operating systems (AIX, OS/400) that talk this protocol*/
+/* between logical partitions                                                */
+/*****************************************************************************/
+#ifndef VIOSRP_H
+#define VIOSRP_H
+#include <scsi/srp.h>
+
+#define SRP_VERSION "16.a"
+#define SRP_MAX_IU_LEN	256
+#define SRP_MAX_LOC_LEN 32
+
+union srp_iu {
+	struct srp_login_req login_req;
+	struct srp_login_rsp login_rsp;
+	struct srp_login_rej login_rej;
+	struct srp_i_logout i_logout;
+	struct srp_t_logout t_logout;
+	struct srp_tsk_mgmt tsk_mgmt;
+	struct srp_cmd cmd;
+	struct srp_rsp rsp;
+	u8 reserved[SRP_MAX_IU_LEN];
+};
+
+enum viosrp_crq_headers {
+	VIOSRP_CRQ_FREE = 0x00,
+	VIOSRP_CRQ_CMD_RSP = 0x80,
+	VIOSRP_CRQ_INIT_RSP = 0xC0,
+	VIOSRP_CRQ_XPORT_EVENT = 0xFF
+};
+
+enum viosrp_crq_init_formats {
+	VIOSRP_CRQ_INIT = 0x01,
+	VIOSRP_CRQ_INIT_COMPLETE = 0x02
+};
+
+enum viosrp_crq_formats {
+	VIOSRP_SRP_FORMAT = 0x01,
+	VIOSRP_MAD_FORMAT = 0x02,
+	VIOSRP_OS400_FORMAT = 0x03,
+	VIOSRP_AIX_FORMAT = 0x04,
+	VIOSRP_LINUX_FORMAT = 0x05,
+	VIOSRP_INLINE_FORMAT = 0x06
+};
+
+enum viosrp_crq_status {
+	VIOSRP_OK = 0x0,
+	VIOSRP_NONRECOVERABLE_ERR = 0x1,
+	VIOSRP_VIOLATES_MAX_XFER = 0x2,
+	VIOSRP_PARTNER_PANIC = 0x3,
+	VIOSRP_DEVICE_BUSY = 0x8,
+	VIOSRP_ADAPTER_FAIL = 0x10,
+	VIOSRP_OK2 = 0x99,
+};
+
+struct viosrp_crq {
+	u8 valid;		/* used by RPA */
+	u8 format;		/* SCSI vs out-of-band */
+	u8 reserved;
+	u8 status;		/* non-scsi failure? (e.g. DMA failure) */
+	__be16 timeout;		/* in seconds */
+	__be16 IU_length;		/* in bytes */
+	__be64 IU_data_ptr;	/* the TCE for transferring data */
+};
+
+/* MADs are Management requests above and beyond the IUs defined in the SRP
+ * standard.
+ */
+enum viosrp_mad_types {
+	VIOSRP_EMPTY_IU_TYPE = 0x01,
+	VIOSRP_ERROR_LOG_TYPE = 0x02,
+	VIOSRP_ADAPTER_INFO_TYPE = 0x03,
+	VIOSRP_CAPABILITIES_TYPE = 0x05,
+	VIOSRP_ENABLE_FAST_FAIL = 0x08,
+};
+
+enum viosrp_mad_status {
+	VIOSRP_MAD_SUCCESS = 0x00,
+	VIOSRP_MAD_NOT_SUPPORTED = 0xF1,
+	VIOSRP_MAD_FAILED = 0xF7,
+};
+
+enum viosrp_capability_type {
+	MIGRATION_CAPABILITIES = 0x01,
+	RESERVATION_CAPABILITIES = 0x02,
+};
+
+enum viosrp_capability_support {
+	SERVER_DOES_NOT_SUPPORTS_CAP = 0x0,
+	SERVER_SUPPORTS_CAP = 0x01,
+	SERVER_CAP_DATA = 0x02,
+};
+
+enum viosrp_reserve_type {
+	CLIENT_RESERVE_SCSI_2 = 0x01,
+};
+
+enum viosrp_capability_flag {
+	CLIENT_MIGRATED = 0x01,
+	CLIENT_RECONNECT = 0x02,
+	CAP_LIST_SUPPORTED = 0x04,
+	CAP_LIST_DATA = 0x08,
+};
+
+/*
+ * Common MAD header
+ */
+struct mad_common {
+	__be32 type;
+	__be16 status;
+	__be16 length;
+	__be64 tag;
+};
+
+/*
+ * All SRP (and MAD) requests normally flow from the
+ * client to the server.  There is no way for the server to send
+ * an asynchronous message back to the client.  The Empty IU is used
+ * to hang out a meaningless request to the server so that it can respond
+ * asynchrouously with something like a SCSI AER
+ */
+struct viosrp_empty_iu {
+	struct mad_common common;
+	__be64 buffer;
+	__be32 port;
+};
+
+struct viosrp_error_log {
+	struct mad_common common;
+	__be64 buffer;
+};
+
+struct viosrp_adapter_info {
+	struct mad_common common;
+	__be64 buffer;
+};
+
+struct viosrp_fast_fail {
+	struct mad_common common;
+};
+
+struct viosrp_capabilities {
+	struct mad_common common;
+	__be64 buffer;
+};
+
+struct mad_capability_common {
+	__be32 cap_type;
+	__be16 length;
+	__be16 server_support;
+};
+
+struct mad_reserve_cap {
+	struct mad_capability_common common;
+	__be32 type;
+};
+
+struct mad_migration_cap {
+	struct mad_capability_common common;
+	__be32 ecl;
+};
+
+struct capabilities {
+	__be32 flags;
+	char name[SRP_MAX_LOC_LEN];
+	char loc[SRP_MAX_LOC_LEN];
+	struct mad_migration_cap migration;
+	struct mad_reserve_cap reserve;
+};
+
+union mad_iu {
+	struct viosrp_empty_iu empty_iu;
+	struct viosrp_error_log error_log;
+	struct viosrp_adapter_info adapter_info;
+	struct viosrp_fast_fail fast_fail;
+	struct viosrp_capabilities capabilities;
+};
+
+union viosrp_iu {
+	union srp_iu srp;
+	union mad_iu mad;
+};
+
+struct mad_adapter_info_data {
+	char srp_version[8];
+	char partition_name[96];
+	__be32 partition_number;
+#define SRP_MAD_VERSION_1 1
+	__be32 mad_version;
+#define SRP_MAD_OS_LINUX 2
+#define SRP_MAD_OS_AIX 3
+	__be32 os_type;
+	__be32 port_max_txu[8];	/* per-port maximum transfer */
+};
+
+#endif