Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 223 insertions, 0 deletions

diff --git a/include/xen/interface/vcpu.h b/include/xen/interface/vcpu.h
new file mode 100644
index 000000000..504c71601
--- /dev/null
+++ b/include/xen/interface/vcpu.h
@@ -0,0 +1,223 @@
+/******************************************************************************
+ * vcpu.h
+ *
+ * VCPU initialisation, query, and hotplug.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Copyright (c) 2005, Keir Fraser <keir@xensource.com>
+ */
+
+#ifndef __XEN_PUBLIC_VCPU_H__
+#define __XEN_PUBLIC_VCPU_H__
+
+/*
+ * Prototype for this hypercall is:
+ *	int vcpu_op(int cmd, int vcpuid, void *extra_args)
+ * @cmd		   == VCPUOP_??? (VCPU operation).
+ * @vcpuid	   == VCPU to operate on.
+ * @extra_args == Operation-specific extra arguments (NULL if none).
+ */
+
+/*
+ * Initialise a VCPU. Each VCPU can be initialised only once. A
+ * newly-initialised VCPU will not run until it is brought up by VCPUOP_up.
+ *
+ * @extra_arg == pointer to vcpu_guest_context structure containing initial
+ *				 state for the VCPU.
+ */
+#define VCPUOP_initialise			 0
+
+/*
+ * Bring up a VCPU. This makes the VCPU runnable. This operation will fail
+ * if the VCPU has not been initialised (VCPUOP_initialise).
+ */
+#define VCPUOP_up					 1
+
+/*
+ * Bring down a VCPU (i.e., make it non-runnable).
+ * There are a few caveats that callers should observe:
+ *	1. This operation may return, and VCPU_is_up may return false, before the
+ *	   VCPU stops running (i.e., the command is asynchronous). It is a good
+ *	   idea to ensure that the VCPU has entered a non-critical loop before
+ *	   bringing it down. Alternatively, this operation is guaranteed
+ *	   synchronous if invoked by the VCPU itself.
+ *	2. After a VCPU is initialised, there is currently no way to drop all its
+ *	   references to domain memory. Even a VCPU that is down still holds
+ *	   memory references via its pagetable base pointer and GDT. It is good
+ *	   practise to move a VCPU onto an 'idle' or default page table, LDT and
+ *	   GDT before bringing it down.
+ */
+#define VCPUOP_down					 2
+
+/* Returns 1 if the given VCPU is up. */
+#define VCPUOP_is_up				 3
+
+/*
+ * Return information about the state and running time of a VCPU.
+ * @extra_arg == pointer to vcpu_runstate_info structure.
+ */
+#define VCPUOP_get_runstate_info	 4
+struct vcpu_runstate_info {
+	/* VCPU's current state (RUNSTATE_*). */
+	int		 state;
+	/* When was current state entered (system time, ns)? */
+	uint64_t state_entry_time;
+	/*
+	 * Update indicator set in state_entry_time:
+	 * When activated via VMASST_TYPE_runstate_update_flag, set during
+	 * updates in guest memory mapped copy of vcpu_runstate_info.
+	 */
+#define XEN_RUNSTATE_UPDATE	(1ULL << 63)
+	/*
+	 * Time spent in each RUNSTATE_* (ns). The sum of these times is
+	 * guaranteed not to drift from system time.
+	 */
+	uint64_t time[4];
+};
+DEFINE_GUEST_HANDLE_STRUCT(vcpu_runstate_info);
+
+/* VCPU is currently running on a physical CPU. */
+#define RUNSTATE_running  0
+
+/* VCPU is runnable, but not currently scheduled on any physical CPU. */
+#define RUNSTATE_runnable 1
+
+/* VCPU is blocked (a.k.a. idle). It is therefore not runnable. */
+#define RUNSTATE_blocked  2
+
+/*
+ * VCPU is not runnable, but it is not blocked.
+ * This is a 'catch all' state for things like hotplug and pauses by the
+ * system administrator (or for critical sections in the hypervisor).
+ * RUNSTATE_blocked dominates this state (it is the preferred state).
+ */
+#define RUNSTATE_offline  3
+
+/*
+ * Register a shared memory area from which the guest may obtain its own
+ * runstate information without needing to execute a hypercall.
+ * Notes:
+ *	1. The registered address may be virtual or physical, depending on the
+ *	   platform. The virtual address should be registered on x86 systems.
+ *	2. Only one shared area may be registered per VCPU. The shared area is
+ *	   updated by the hypervisor each time the VCPU is scheduled. Thus
+ *	   runstate.state will always be RUNSTATE_running and
+ *	   runstate.state_entry_time will indicate the system time at which the
+ *	   VCPU was last scheduled to run.
+ * @extra_arg == pointer to vcpu_register_runstate_memory_area structure.
+ */
+#define VCPUOP_register_runstate_memory_area 5
+struct vcpu_register_runstate_memory_area {
+		union {
+				GUEST_HANDLE(vcpu_runstate_info) h;
+				struct vcpu_runstate_info *v;
+				uint64_t p;
+		} addr;
+};
+
+/*
+ * Set or stop a VCPU's periodic timer. Every VCPU has one periodic timer
+ * which can be set via these commands. Periods smaller than one millisecond
+ * may not be supported.
+ */
+#define VCPUOP_set_periodic_timer	 6 /* arg == vcpu_set_periodic_timer_t */
+#define VCPUOP_stop_periodic_timer	 7 /* arg == NULL */
+struct vcpu_set_periodic_timer {
+		uint64_t period_ns;
+};
+DEFINE_GUEST_HANDLE_STRUCT(vcpu_set_periodic_timer);
+
+/*
+ * Set or stop a VCPU's single-shot timer. Every VCPU has one single-shot
+ * timer which can be set via these commands.
+ */
+#define VCPUOP_set_singleshot_timer	 8 /* arg == vcpu_set_singleshot_timer_t */
+#define VCPUOP_stop_singleshot_timer 9 /* arg == NULL */
+struct vcpu_set_singleshot_timer {
+		uint64_t timeout_abs_ns;
+		uint32_t flags;			   /* VCPU_SSHOTTMR_??? */
+};
+DEFINE_GUEST_HANDLE_STRUCT(vcpu_set_singleshot_timer);
+
+/* Flags to VCPUOP_set_singleshot_timer. */
+ /* Require the timeout to be in the future (return -ETIME if it's passed). */
+#define _VCPU_SSHOTTMR_future (0)
+#define VCPU_SSHOTTMR_future  (1U << _VCPU_SSHOTTMR_future)
+
+/*
+ * Register a memory location in the guest address space for the
+ * vcpu_info structure.  This allows the guest to place the vcpu_info
+ * structure in a convenient place, such as in a per-cpu data area.
+ * The pointer need not be page aligned, but the structure must not
+ * cross a page boundary.
+ */
+#define VCPUOP_register_vcpu_info   10  /* arg == struct vcpu_info */
+struct vcpu_register_vcpu_info {
+    uint64_t mfn;    /* mfn of page to place vcpu_info */
+    uint32_t offset; /* offset within page */
+    uint32_t rsvd;   /* unused */
+};
+DEFINE_GUEST_HANDLE_STRUCT(vcpu_register_vcpu_info);
+
+/* Send an NMI to the specified VCPU. @extra_arg == NULL. */
+#define VCPUOP_send_nmi             11
+
+/*
+ * Get the physical ID information for a pinned vcpu's underlying physical
+ * processor.  The physical ID informmation is architecture-specific.
+ * On x86: id[31:0]=apic_id, id[63:32]=acpi_id.
+ * This command returns -EINVAL if it is not a valid operation for this VCPU.
+ */
+#define VCPUOP_get_physid           12 /* arg == vcpu_get_physid_t */
+struct vcpu_get_physid {
+	uint64_t phys_id;
+};
+DEFINE_GUEST_HANDLE_STRUCT(vcpu_get_physid);
+#define xen_vcpu_physid_to_x86_apicid(physid) ((uint32_t)(physid))
+#define xen_vcpu_physid_to_x86_acpiid(physid) ((uint32_t)((physid) >> 32))
+
+/*
+ * Register a memory location to get a secondary copy of the vcpu time
+ * parameters.  The master copy still exists as part of the vcpu shared
+ * memory area, and this secondary copy is updated whenever the master copy
+ * is updated (and using the same versioning scheme for synchronisation).
+ *
+ * The intent is that this copy may be mapped (RO) into userspace so
+ * that usermode can compute system time using the time info and the
+ * tsc.  Usermode will see an array of vcpu_time_info structures, one
+ * for each vcpu, and choose the right one by an existing mechanism
+ * which allows it to get the current vcpu number (such as via a
+ * segment limit).  It can then apply the normal algorithm to compute
+ * system time from the tsc.
+ *
+ * @extra_arg == pointer to vcpu_register_time_info_memory_area structure.
+ */
+#define VCPUOP_register_vcpu_time_memory_area   13
+DEFINE_GUEST_HANDLE_STRUCT(vcpu_time_info);
+struct vcpu_register_time_memory_area {
+	union {
+		GUEST_HANDLE(vcpu_time_info) h;
+		struct pvclock_vcpu_time_info *v;
+		uint64_t p;
+	} addr;
+};
+DEFINE_GUEST_HANDLE_STRUCT(vcpu_register_time_memory_area);
+
+#endif /* __XEN_PUBLIC_VCPU_H__ */