Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 372 insertions, 0 deletions

diff --git a/sound/soc/samsung/s3c24xx_simtec.c b/sound/soc/samsung/s3c24xx_simtec.c
new file mode 100644
index 000000000..6de63f3e3
--- /dev/null
+++ b/sound/soc/samsung/s3c24xx_simtec.c
@@ -0,0 +1,372 @@
+/* sound/soc/samsung/s3c24xx_simtec.c
+ *
+ * Copyright 2009 Simtec Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+
+#include <sound/soc.h>
+
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+
+#include "s3c24xx-i2s.h"
+#include "s3c24xx_simtec.h"
+
+static struct s3c24xx_audio_simtec_pdata *pdata;
+static struct clk *xtal_clk;
+
+static int spk_gain;
+static int spk_unmute;
+
+/**
+ * speaker_gain_get - read the speaker gain setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be updated.
+ *
+ * Read the value for the AMP gain control.
+ */
+static int speaker_gain_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.integer.value[0] = spk_gain;
+	return 0;
+}
+
+/**
+ * speaker_gain_set - set the value of the speaker amp gain
+ * @value: The value to write.
+ */
+static void speaker_gain_set(int value)
+{
+	gpio_set_value_cansleep(pdata->amp_gain[0], value & 1);
+	gpio_set_value_cansleep(pdata->amp_gain[1], value >> 1);
+}
+
+/**
+ * speaker_gain_put - set the speaker gain setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be set.
+ *
+ * Set the value of the speaker gain from the specified
+ * @ucontrol setting.
+ *
+ * Note, if the speaker amp is muted, then we do not set a gain value
+ * as at-least one of the ICs that is fitted will try and power up even
+ * if the main control is set to off.
+ */
+static int speaker_gain_put(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	int value = ucontrol->value.integer.value[0];
+
+	spk_gain = value;
+
+	if (!spk_unmute)
+		speaker_gain_set(value);
+
+	return 0;
+}
+
+static const struct snd_kcontrol_new amp_gain_controls[] = {
+	SOC_SINGLE_EXT("Speaker Gain", 0, 0, 3, 0,
+		       speaker_gain_get, speaker_gain_put),
+};
+
+/**
+ * spk_unmute_state - set the unmute state of the speaker
+ * @to: zero to unmute, non-zero to ununmute.
+ */
+static void spk_unmute_state(int to)
+{
+	pr_debug("%s: to=%d\n", __func__, to);
+
+	spk_unmute = to;
+	gpio_set_value(pdata->amp_gpio, to);
+
+	/* if we're umuting, also re-set the gain */
+	if (to && pdata->amp_gain[0] > 0)
+		speaker_gain_set(spk_gain);
+}
+
+/**
+ * speaker_unmute_get - read the speaker unmute setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be updated.
+ *
+ * Read the value for the AMP gain control.
+ */
+static int speaker_unmute_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	ucontrol->value.integer.value[0] = spk_unmute;
+	return 0;
+}
+
+/**
+ * speaker_unmute_put - set the speaker unmute setting.
+ * @kcontrol: The control for the speaker gain.
+ * @ucontrol: The value that needs to be set.
+ *
+ * Set the value of the speaker gain from the specified
+ * @ucontrol setting.
+ */
+static int speaker_unmute_put(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *ucontrol)
+{
+	spk_unmute_state(ucontrol->value.integer.value[0]);
+	return 0;
+}
+
+/* This is added as a manual control as the speaker amps create clicks
+ * when their power state is changed, which are far more noticeable than
+ * anything produced by the CODEC itself.
+ */
+static const struct snd_kcontrol_new amp_unmute_controls[] = {
+	SOC_SINGLE_EXT("Speaker Switch", 0, 0, 1, 0,
+		       speaker_unmute_get, speaker_unmute_put),
+};
+
+void simtec_audio_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+
+	if (pdata->amp_gpio > 0) {
+		pr_debug("%s: adding amp routes\n", __func__);
+
+		snd_soc_add_card_controls(card, amp_unmute_controls,
+				     ARRAY_SIZE(amp_unmute_controls));
+	}
+
+	if (pdata->amp_gain[0] > 0) {
+		pr_debug("%s: adding amp controls\n", __func__);
+		snd_soc_add_card_controls(card, amp_gain_controls,
+				     ARRAY_SIZE(amp_gain_controls));
+	}
+}
+EXPORT_SYMBOL_GPL(simtec_audio_init);
+
+#define CODEC_CLOCK 12000000
+
+/**
+ * simtec_hw_params - update hardware parameters
+ * @substream: The audio substream instance.
+ * @params: The parameters requested.
+ *
+ * Update the codec data routing and configuration  settings
+ * from the supplied data.
+ */
+static int simtec_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	int ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0,
+				     CODEC_CLOCK, SND_SOC_CLOCK_IN);
+	if (ret) {
+		pr_err( "%s: failed setting codec sysclk\n", __func__);
+		return ret;
+	}
+
+	if (pdata->use_mpllin) {
+		ret = snd_soc_dai_set_sysclk(cpu_dai, S3C24XX_CLKSRC_MPLL,
+					     0, SND_SOC_CLOCK_OUT);
+
+		if (ret) {
+			pr_err("%s: failed to set MPLLin as clksrc\n",
+			       __func__);
+			return ret;
+		}
+	}
+
+	if (pdata->output_cdclk) {
+		int cdclk_scale;
+
+		cdclk_scale = clk_get_rate(xtal_clk) / CODEC_CLOCK;
+		cdclk_scale--;
+
+		ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+					     cdclk_scale);
+	}
+
+	return 0;
+}
+
+static int simtec_call_startup(struct s3c24xx_audio_simtec_pdata *pd)
+{
+	/* call any board supplied startup code, this currently only
+	 * covers the bast/vr1000 which have a CPLD in the way of the
+	 * LRCLK */
+	if (pd->startup)
+		pd->startup();
+
+	return 0;
+}
+
+static const struct snd_soc_ops simtec_snd_ops = {
+	.hw_params	= simtec_hw_params,
+};
+
+/**
+ * attach_gpio_amp - get and configure the necessary gpios
+ * @dev: The device we're probing.
+ * @pd: The platform data supplied by the board.
+ *
+ * If there is a GPIO based amplifier attached to the board, claim
+ * the necessary GPIO lines for it, and set default values.
+ */
+static int attach_gpio_amp(struct device *dev,
+			   struct s3c24xx_audio_simtec_pdata *pd)
+{
+	int ret;
+
+	/* attach gpio amp gain (if any) */
+	if (pdata->amp_gain[0] > 0) {
+		ret = gpio_request(pd->amp_gain[0], "gpio-amp-gain0");
+		if (ret) {
+			dev_err(dev, "cannot get amp gpio gain0\n");
+			return ret;
+		}
+
+		ret = gpio_request(pd->amp_gain[1], "gpio-amp-gain1");
+		if (ret) {
+			dev_err(dev, "cannot get amp gpio gain1\n");
+			gpio_free(pdata->amp_gain[0]);
+			return ret;
+		}
+
+		gpio_direction_output(pd->amp_gain[0], 0);
+		gpio_direction_output(pd->amp_gain[1], 0);
+	}
+
+	/* note, currently we assume GPA0 isn't valid amp */
+	if (pdata->amp_gpio > 0) {
+		ret = gpio_request(pd->amp_gpio, "gpio-amp");
+		if (ret) {
+			dev_err(dev, "cannot get amp gpio %d (%d)\n",
+				pd->amp_gpio, ret);
+			goto err_amp;
+		}
+
+		/* set the amp off at startup */
+		spk_unmute_state(0);
+	}
+
+	return 0;
+
+err_amp:
+	if (pd->amp_gain[0] > 0) {
+		gpio_free(pd->amp_gain[0]);
+		gpio_free(pd->amp_gain[1]);
+	}
+
+	return ret;
+}
+
+static void detach_gpio_amp(struct s3c24xx_audio_simtec_pdata *pd)
+{
+	if (pd->amp_gain[0] > 0) {
+		gpio_free(pd->amp_gain[0]);
+		gpio_free(pd->amp_gain[1]);
+	}
+
+	if (pd->amp_gpio > 0)
+		gpio_free(pd->amp_gpio);
+}
+
+#ifdef CONFIG_PM
+static int simtec_audio_resume(struct device *dev)
+{
+	simtec_call_startup(pdata);
+	return 0;
+}
+
+const struct dev_pm_ops simtec_audio_pmops = {
+	.resume	= simtec_audio_resume,
+};
+EXPORT_SYMBOL_GPL(simtec_audio_pmops);
+#endif
+
+int simtec_audio_core_probe(struct platform_device *pdev,
+			    struct snd_soc_card *card)
+{
+	struct platform_device *snd_dev;
+	int ret;
+
+	card->dai_link->ops = &simtec_snd_ops;
+	card->dai_link->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data supplied\n");
+		return -EINVAL;
+	}
+
+	simtec_call_startup(pdata);
+
+	xtal_clk = clk_get(&pdev->dev, "xtal");
+	if (IS_ERR(xtal_clk)) {
+		dev_err(&pdev->dev, "could not get clkout0\n");
+		return -EINVAL;
+	}
+
+	dev_info(&pdev->dev, "xtal rate is %ld\n", clk_get_rate(xtal_clk));
+
+	ret = attach_gpio_amp(&pdev->dev, pdata);
+	if (ret)
+		goto err_clk;
+
+	snd_dev = platform_device_alloc("soc-audio", -1);
+	if (!snd_dev) {
+		dev_err(&pdev->dev, "failed to alloc soc-audio devicec\n");
+		ret = -ENOMEM;
+		goto err_gpio;
+	}
+
+	platform_set_drvdata(snd_dev, card);
+
+	ret = platform_device_add(snd_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add soc-audio dev\n");
+		goto err_pdev;
+	}
+
+	platform_set_drvdata(pdev, snd_dev);
+	return 0;
+
+err_pdev:
+	platform_device_put(snd_dev);
+
+err_gpio:
+	detach_gpio_amp(pdata);
+
+err_clk:
+	clk_put(xtal_clk);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(simtec_audio_core_probe);
+
+int simtec_audio_remove(struct platform_device *pdev)
+{
+	struct platform_device *snd_dev = platform_get_drvdata(pdev);
+
+	platform_device_unregister(snd_dev);
+
+	detach_gpio_amp(pdata);
+	clk_put(xtal_clk);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(simtec_audio_remove);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("ALSA SoC Simtec Audio common support");
+MODULE_LICENSE("GPL");