Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 4425 insertions, 0 deletions

diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
new file mode 100755
index 000000000..406401f1a
--- /dev/null
+++ b/tools/testing/ktest/ktest.pl
@@ -0,0 +1,4425 @@
+#!/usr/bin/perl -w
+#
+# Copyright 2010 - Steven Rostedt <srostedt@redhat.com>, Red Hat Inc.
+# Licensed under the terms of the GNU GPL License version 2
+#
+
+use strict;
+use IPC::Open2;
+use Fcntl qw(F_GETFL F_SETFL O_NONBLOCK);
+use File::Path qw(mkpath);
+use File::Copy qw(cp);
+use FileHandle;
+use FindBin;
+
+my $VERSION = "0.2";
+
+$| = 1;
+
+my %opt;
+my %repeat_tests;
+my %repeats;
+my %evals;
+
+#default opts
+my %default = (
+    "MAILER"			=> "sendmail",  # default mailer
+    "EMAIL_ON_ERROR"		=> 1,
+    "EMAIL_WHEN_FINISHED"	=> 1,
+    "EMAIL_WHEN_CANCELED"	=> 0,
+    "EMAIL_WHEN_STARTED"	=> 0,
+    "NUM_TESTS"			=> 1,
+    "TEST_TYPE"			=> "build",
+    "BUILD_TYPE"		=> "randconfig",
+    "MAKE_CMD"			=> "make",
+    "CLOSE_CONSOLE_SIGNAL"	=> "INT",
+    "TIMEOUT"			=> 120,
+    "TMP_DIR"			=> "/tmp/ktest/\${MACHINE}",
+    "SLEEP_TIME"		=> 60,	# sleep time between tests
+    "BUILD_NOCLEAN"		=> 0,
+    "REBOOT_ON_ERROR"		=> 0,
+    "POWEROFF_ON_ERROR"		=> 0,
+    "REBOOT_ON_SUCCESS"		=> 1,
+    "POWEROFF_ON_SUCCESS"	=> 0,
+    "BUILD_OPTIONS"		=> "",
+    "BISECT_SLEEP_TIME"		=> 60,   # sleep time between bisects
+    "PATCHCHECK_SLEEP_TIME"	=> 60, # sleep time between patch checks
+    "CLEAR_LOG"			=> 0,
+    "BISECT_MANUAL"		=> 0,
+    "BISECT_SKIP"		=> 1,
+    "BISECT_TRIES"		=> 1,
+    "MIN_CONFIG_TYPE"		=> "boot",
+    "SUCCESS_LINE"		=> "login:",
+    "DETECT_TRIPLE_FAULT"	=> 1,
+    "NO_INSTALL"		=> 0,
+    "BOOTED_TIMEOUT"		=> 1,
+    "DIE_ON_FAILURE"		=> 1,
+    "SSH_EXEC"			=> "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND",
+    "SCP_TO_TARGET"		=> "scp \$SRC_FILE \$SSH_USER\@\$MACHINE:\$DST_FILE",
+    "SCP_TO_TARGET_INSTALL"	=> "\${SCP_TO_TARGET}",
+    "REBOOT"			=> "ssh \$SSH_USER\@\$MACHINE reboot",
+    "STOP_AFTER_SUCCESS"	=> 10,
+    "STOP_AFTER_FAILURE"	=> 60,
+    "STOP_TEST_AFTER"		=> 600,
+    "MAX_MONITOR_WAIT"		=> 1800,
+    "GRUB_REBOOT"		=> "grub2-reboot",
+    "SYSLINUX"			=> "extlinux",
+    "SYSLINUX_PATH"		=> "/boot/extlinux",
+    "CONNECT_TIMEOUT"		=> 25,
+
+# required, and we will ask users if they don't have them but we keep the default
+# value something that is common.
+    "REBOOT_TYPE"		=> "grub",
+    "LOCALVERSION"		=> "-test",
+    "SSH_USER"			=> "root",
+    "BUILD_TARGET"	 	=> "arch/x86/boot/bzImage",
+    "TARGET_IMAGE"		=> "/boot/vmlinuz-test",
+
+    "LOG_FILE"			=> undef,
+    "IGNORE_UNUSED"		=> 0,
+);
+
+my $ktest_config = "ktest.conf";
+my $version;
+my $have_version = 0;
+my $machine;
+my $last_machine;
+my $ssh_user;
+my $tmpdir;
+my $builddir;
+my $outputdir;
+my $output_config;
+my $test_type;
+my $build_type;
+my $build_options;
+my $final_post_ktest;
+my $pre_ktest;
+my $post_ktest;
+my $pre_test;
+my $post_test;
+my $pre_build;
+my $post_build;
+my $pre_build_die;
+my $post_build_die;
+my $reboot_type;
+my $reboot_script;
+my $power_cycle;
+my $reboot;
+my $reboot_on_error;
+my $switch_to_good;
+my $switch_to_test;
+my $poweroff_on_error;
+my $reboot_on_success;
+my $die_on_failure;
+my $powercycle_after_reboot;
+my $poweroff_after_halt;
+my $max_monitor_wait;
+my $ssh_exec;
+my $scp_to_target;
+my $scp_to_target_install;
+my $power_off;
+my $grub_menu;
+my $last_grub_menu;
+my $grub_file;
+my $grub_number;
+my $grub_reboot;
+my $syslinux;
+my $syslinux_path;
+my $syslinux_label;
+my $target;
+my $make;
+my $pre_install;
+my $post_install;
+my $no_install;
+my $noclean;
+my $minconfig;
+my $start_minconfig;
+my $start_minconfig_defined;
+my $output_minconfig;
+my $minconfig_type;
+my $use_output_minconfig;
+my $warnings_file;
+my $ignore_config;
+my $ignore_errors;
+my $addconfig;
+my $in_bisect = 0;
+my $bisect_bad_commit = "";
+my $reverse_bisect;
+my $bisect_manual;
+my $bisect_skip;
+my $bisect_tries;
+my $config_bisect_good;
+my $bisect_ret_good;
+my $bisect_ret_bad;
+my $bisect_ret_skip;
+my $bisect_ret_abort;
+my $bisect_ret_default;
+my $in_patchcheck = 0;
+my $run_test;
+my $buildlog;
+my $testlog;
+my $dmesg;
+my $monitor_fp;
+my $monitor_pid;
+my $monitor_cnt = 0;
+my $sleep_time;
+my $bisect_sleep_time;
+my $patchcheck_sleep_time;
+my $ignore_warnings;
+my $store_failures;
+my $store_successes;
+my $test_name;
+my $timeout;
+my $connect_timeout;
+my $config_bisect_exec;
+my $booted_timeout;
+my $detect_triplefault;
+my $console;
+my $close_console_signal;
+my $reboot_success_line;
+my $success_line;
+my $stop_after_success;
+my $stop_after_failure;
+my $stop_test_after;
+my $build_target;
+my $target_image;
+my $checkout;
+my $localversion;
+my $iteration = 0;
+my $successes = 0;
+my $stty_orig;
+my $run_command_status = 0;
+
+my $bisect_good;
+my $bisect_bad;
+my $bisect_type;
+my $bisect_start;
+my $bisect_replay;
+my $bisect_files;
+my $bisect_reverse;
+my $bisect_check;
+
+my $config_bisect;
+my $config_bisect_type;
+my $config_bisect_check;
+
+my $patchcheck_type;
+my $patchcheck_start;
+my $patchcheck_cherry;
+my $patchcheck_end;
+
+my $build_time;
+my $install_time;
+my $reboot_time;
+my $test_time;
+
+my $pwd;
+my $dirname = $FindBin::Bin;
+
+my $mailto;
+my $mailer;
+my $mail_path;
+my $mail_command;
+my $email_on_error;
+my $email_when_finished;
+my $email_when_started;
+my $email_when_canceled;
+
+my $script_start_time = localtime();
+
+# set when a test is something other that just building or install
+# which would require more options.
+my $buildonly = 1;
+
+# tell build not to worry about warnings, even when WARNINGS_FILE is set
+my $warnings_ok = 0;
+
+# set when creating a new config
+my $newconfig = 0;
+
+my %entered_configs;
+my %config_help;
+my %variable;
+
+# force_config is the list of configs that we force enabled (or disabled)
+# in a .config file. The MIN_CONFIG and ADD_CONFIG configs.
+my %force_config;
+
+# do not force reboots on config problems
+my $no_reboot = 1;
+
+# reboot on success
+my $reboot_success = 0;
+
+my %option_map = (
+    "MAILTO"			=> \$mailto,
+    "MAILER"			=> \$mailer,
+    "MAIL_PATH"			=> \$mail_path,
+    "MAIL_COMMAND"		=> \$mail_command,
+    "EMAIL_ON_ERROR"		=> \$email_on_error,
+    "EMAIL_WHEN_FINISHED"	=> \$email_when_finished,
+    "EMAIL_WHEN_STARTED"	=> \$email_when_started,
+    "EMAIL_WHEN_CANCELED"	=> \$email_when_canceled,
+    "MACHINE"			=> \$machine,
+    "SSH_USER"			=> \$ssh_user,
+    "TMP_DIR"			=> \$tmpdir,
+    "OUTPUT_DIR"		=> \$outputdir,
+    "BUILD_DIR"			=> \$builddir,
+    "TEST_TYPE"			=> \$test_type,
+    "PRE_KTEST"			=> \$pre_ktest,
+    "POST_KTEST"		=> \$post_ktest,
+    "PRE_TEST"			=> \$pre_test,
+    "POST_TEST"			=> \$post_test,
+    "BUILD_TYPE"		=> \$build_type,
+    "BUILD_OPTIONS"		=> \$build_options,
+    "PRE_BUILD"			=> \$pre_build,
+    "POST_BUILD"		=> \$post_build,
+    "PRE_BUILD_DIE"		=> \$pre_build_die,
+    "POST_BUILD_DIE"		=> \$post_build_die,
+    "POWER_CYCLE"		=> \$power_cycle,
+    "REBOOT"			=> \$reboot,
+    "BUILD_NOCLEAN"		=> \$noclean,
+    "MIN_CONFIG"		=> \$minconfig,
+    "OUTPUT_MIN_CONFIG"		=> \$output_minconfig,
+    "START_MIN_CONFIG"		=> \$start_minconfig,
+    "MIN_CONFIG_TYPE"		=> \$minconfig_type,
+    "USE_OUTPUT_MIN_CONFIG"	=> \$use_output_minconfig,
+    "WARNINGS_FILE"		=> \$warnings_file,
+    "IGNORE_CONFIG"		=> \$ignore_config,
+    "TEST"			=> \$run_test,
+    "ADD_CONFIG"		=> \$addconfig,
+    "REBOOT_TYPE"		=> \$reboot_type,
+    "GRUB_MENU"			=> \$grub_menu,
+    "GRUB_FILE"			=> \$grub_file,
+    "GRUB_REBOOT"		=> \$grub_reboot,
+    "SYSLINUX"			=> \$syslinux,
+    "SYSLINUX_PATH"		=> \$syslinux_path,
+    "SYSLINUX_LABEL"		=> \$syslinux_label,
+    "PRE_INSTALL"		=> \$pre_install,
+    "POST_INSTALL"		=> \$post_install,
+    "NO_INSTALL"		=> \$no_install,
+    "REBOOT_SCRIPT"		=> \$reboot_script,
+    "REBOOT_ON_ERROR"		=> \$reboot_on_error,
+    "SWITCH_TO_GOOD"		=> \$switch_to_good,
+    "SWITCH_TO_TEST"		=> \$switch_to_test,
+    "POWEROFF_ON_ERROR"		=> \$poweroff_on_error,
+    "REBOOT_ON_SUCCESS"		=> \$reboot_on_success,
+    "DIE_ON_FAILURE"		=> \$die_on_failure,
+    "POWER_OFF"			=> \$power_off,
+    "POWERCYCLE_AFTER_REBOOT"	=> \$powercycle_after_reboot,
+    "POWEROFF_AFTER_HALT"	=> \$poweroff_after_halt,
+    "MAX_MONITOR_WAIT"		=> \$max_monitor_wait,
+    "SLEEP_TIME"		=> \$sleep_time,
+    "BISECT_SLEEP_TIME"		=> \$bisect_sleep_time,
+    "PATCHCHECK_SLEEP_TIME"	=> \$patchcheck_sleep_time,
+    "IGNORE_WARNINGS"		=> \$ignore_warnings,
+    "IGNORE_ERRORS"		=> \$ignore_errors,
+    "BISECT_MANUAL"		=> \$bisect_manual,
+    "BISECT_SKIP"		=> \$bisect_skip,
+    "BISECT_TRIES"		=> \$bisect_tries,
+    "CONFIG_BISECT_GOOD"	=> \$config_bisect_good,
+    "BISECT_RET_GOOD"		=> \$bisect_ret_good,
+    "BISECT_RET_BAD"		=> \$bisect_ret_bad,
+    "BISECT_RET_SKIP"		=> \$bisect_ret_skip,
+    "BISECT_RET_ABORT"		=> \$bisect_ret_abort,
+    "BISECT_RET_DEFAULT"	=> \$bisect_ret_default,
+    "STORE_FAILURES"		=> \$store_failures,
+    "STORE_SUCCESSES"		=> \$store_successes,
+    "TEST_NAME"			=> \$test_name,
+    "TIMEOUT"			=> \$timeout,
+    "CONNECT_TIMEOUT"		=> \$connect_timeout,
+    "CONFIG_BISECT_EXEC"	=> \$config_bisect_exec,
+    "BOOTED_TIMEOUT"		=> \$booted_timeout,
+    "CONSOLE"			=> \$console,
+    "CLOSE_CONSOLE_SIGNAL"	=> \$close_console_signal,
+    "DETECT_TRIPLE_FAULT"	=> \$detect_triplefault,
+    "SUCCESS_LINE"		=> \$success_line,
+    "REBOOT_SUCCESS_LINE"	=> \$reboot_success_line,
+    "STOP_AFTER_SUCCESS"	=> \$stop_after_success,
+    "STOP_AFTER_FAILURE"	=> \$stop_after_failure,
+    "STOP_TEST_AFTER"		=> \$stop_test_after,
+    "BUILD_TARGET"		=> \$build_target,
+    "SSH_EXEC"			=> \$ssh_exec,
+    "SCP_TO_TARGET"		=> \$scp_to_target,
+    "SCP_TO_TARGET_INSTALL"	=> \$scp_to_target_install,
+    "CHECKOUT"			=> \$checkout,
+    "TARGET_IMAGE"		=> \$target_image,
+    "LOCALVERSION"		=> \$localversion,
+
+    "BISECT_GOOD"		=> \$bisect_good,
+    "BISECT_BAD"		=> \$bisect_bad,
+    "BISECT_TYPE"		=> \$bisect_type,
+    "BISECT_START"		=> \$bisect_start,
+    "BISECT_REPLAY"		=> \$bisect_replay,
+    "BISECT_FILES"		=> \$bisect_files,
+    "BISECT_REVERSE"		=> \$bisect_reverse,
+    "BISECT_CHECK"		=> \$bisect_check,
+
+    "CONFIG_BISECT"		=> \$config_bisect,
+    "CONFIG_BISECT_TYPE"	=> \$config_bisect_type,
+    "CONFIG_BISECT_CHECK"	=> \$config_bisect_check,
+
+    "PATCHCHECK_TYPE"		=> \$patchcheck_type,
+    "PATCHCHECK_START"		=> \$patchcheck_start,
+    "PATCHCHECK_CHERRY"		=> \$patchcheck_cherry,
+    "PATCHCHECK_END"		=> \$patchcheck_end,
+);
+
+# Options may be used by other options, record them.
+my %used_options;
+
+# default variables that can be used
+chomp ($variable{"PWD"} = `pwd`);
+$pwd = $variable{"PWD"};
+
+$config_help{"MACHINE"} = << "EOF"
+ The machine hostname that you will test.
+ For build only tests, it is still needed to differentiate log files.
+EOF
+    ;
+$config_help{"SSH_USER"} = << "EOF"
+ The box is expected to have ssh on normal bootup, provide the user
+  (most likely root, since you need privileged operations)
+EOF
+    ;
+$config_help{"BUILD_DIR"} = << "EOF"
+ The directory that contains the Linux source code (full path).
+ You can use \${PWD} that will be the path where ktest.pl is run, or use
+ \${THIS_DIR} which is assigned \${PWD} but may be changed later.
+EOF
+    ;
+$config_help{"OUTPUT_DIR"} = << "EOF"
+ The directory that the objects will be built (full path).
+ (can not be same as BUILD_DIR)
+ You can use \${PWD} that will be the path where ktest.pl is run, or use
+ \${THIS_DIR} which is assigned \${PWD} but may be changed later.
+EOF
+    ;
+$config_help{"BUILD_TARGET"} = << "EOF"
+ The location of the compiled file to copy to the target.
+ (relative to OUTPUT_DIR)
+EOF
+    ;
+$config_help{"BUILD_OPTIONS"} = << "EOF"
+ Options to add to \"make\" when building.
+ i.e.  -j20
+EOF
+    ;
+$config_help{"TARGET_IMAGE"} = << "EOF"
+ The place to put your image on the test machine.
+EOF
+    ;
+$config_help{"POWER_CYCLE"} = << "EOF"
+ A script or command to reboot the box.
+
+ Here is a digital loggers power switch example
+ POWER_CYCLE = wget --no-proxy -O /dev/null -q  --auth-no-challenge 'http://admin:admin\@power/outlet?5=CCL'
+
+ Here is an example to reboot a virtual box on the current host
+ with the name "Guest".
+ POWER_CYCLE = virsh destroy Guest; sleep 5; virsh start Guest
+EOF
+    ;
+$config_help{"CONSOLE"} = << "EOF"
+ The script or command that reads the console
+
+  If you use ttywatch server, something like the following would work.
+CONSOLE = nc -d localhost 3001
+
+ For a virtual machine with guest name "Guest".
+CONSOLE =  virsh console Guest
+EOF
+    ;
+$config_help{"LOCALVERSION"} = << "EOF"
+ Required version ending to differentiate the test
+ from other linux builds on the system.
+EOF
+    ;
+$config_help{"REBOOT_TYPE"} = << "EOF"
+ Way to reboot the box to the test kernel.
+ Only valid options so far are "grub", "grub2", "syslinux", and "script".
+
+ If you specify grub, it will assume grub version 1
+ and will search in /boot/grub/menu.lst for the title \$GRUB_MENU
+ and select that target to reboot to the kernel. If this is not
+ your setup, then specify "script" and have a command or script
+ specified in REBOOT_SCRIPT to boot to the target.
+
+ The entry in /boot/grub/menu.lst must be entered in manually.
+ The test will not modify that file.
+
+ If you specify grub2, then you also need to specify both \$GRUB_MENU
+ and \$GRUB_FILE.
+
+ If you specify syslinux, then you may use SYSLINUX to define the syslinux
+ command (defaults to extlinux), and SYSLINUX_PATH to specify the path to
+ the syslinux install (defaults to /boot/extlinux). But you have to specify
+ SYSLINUX_LABEL to define the label to boot to for the test kernel.
+EOF
+    ;
+$config_help{"GRUB_MENU"} = << "EOF"
+ The grub title name for the test kernel to boot
+ (Only mandatory if REBOOT_TYPE = grub or grub2)
+
+ Note, ktest.pl will not update the grub menu.lst, you need to
+ manually add an option for the test. ktest.pl will search
+ the grub menu.lst for this option to find what kernel to
+ reboot into.
+
+ For example, if in the /boot/grub/menu.lst the test kernel title has:
+ title Test Kernel
+ kernel vmlinuz-test
+ GRUB_MENU = Test Kernel
+
+ For grub2, a search of \$GRUB_FILE is performed for the lines
+ that begin with "menuentry". It will not detect submenus. The
+ menu must be a non-nested menu. Add the quotes used in the menu
+ to guarantee your selection, as the first menuentry with the content
+ of \$GRUB_MENU that is found will be used.
+EOF
+    ;
+$config_help{"GRUB_FILE"} = << "EOF"
+ If grub2 is used, the full path for the grub.cfg file is placed
+ here. Use something like /boot/grub2/grub.cfg to search.
+EOF
+    ;
+$config_help{"SYSLINUX_LABEL"} = << "EOF"
+ If syslinux is used, the label that boots the target kernel must
+ be specified with SYSLINUX_LABEL.
+EOF
+    ;
+$config_help{"REBOOT_SCRIPT"} = << "EOF"
+ A script to reboot the target into the test kernel
+ (Only mandatory if REBOOT_TYPE = script)
+EOF
+    ;
+
+sub _logit {
+    if (defined($opt{"LOG_FILE"})) {
+	open(OUT, ">> $opt{LOG_FILE}") or die "Can't write to $opt{LOG_FILE}";
+	print OUT @_;
+	close(OUT);
+    }
+}
+
+sub logit {
+    if (defined($opt{"LOG_FILE"})) {
+	_logit @_;
+    } else {
+	print @_;
+    }
+}
+
+sub doprint {
+    print @_;
+    _logit @_;
+}
+
+sub read_prompt {
+    my ($cancel, $prompt) = @_;
+
+    my $ans;
+
+    for (;;) {
+	if ($cancel) {
+	    print "$prompt [y/n/C] ";
+	} else {
+	    print "$prompt [Y/n] ";
+	}
+	$ans = <STDIN>;
+	chomp $ans;
+	if ($ans =~ /^\s*$/) {
+	    if ($cancel) {
+		$ans = "c";
+	    } else {
+		$ans = "y";
+	    }
+	}
+	last if ($ans =~ /^y$/i || $ans =~ /^n$/i);
+	if ($cancel) {
+	    last if ($ans =~ /^c$/i);
+	    print "Please answer either 'y', 'n' or 'c'.\n";
+	} else {
+	    print "Please answer either 'y' or 'n'.\n";
+	}
+    }
+    if ($ans =~ /^c/i) {
+	exit;
+    }
+    if ($ans !~ /^y$/i) {
+	return 0;
+    }
+    return 1;
+}
+
+sub read_yn {
+    my ($prompt) = @_;
+
+    return read_prompt 0, $prompt;
+}
+
+sub read_ync {
+    my ($prompt) = @_;
+
+    return read_prompt 1, $prompt;
+}
+
+sub get_mandatory_config {
+    my ($config) = @_;
+    my $ans;
+
+    return if (defined($opt{$config}));
+
+    if (defined($config_help{$config})) {
+	print "\n";
+	print $config_help{$config};
+    }
+
+    for (;;) {
+	print "$config = ";
+	if (defined($default{$config}) && length($default{$config})) {
+	    print "\[$default{$config}\] ";
+	}
+	$ans = <STDIN>;
+	$ans =~ s/^\s*(.*\S)\s*$/$1/;
+	if ($ans =~ /^\s*$/) {
+	    if ($default{$config}) {
+		$ans = $default{$config};
+	    } else {
+		print "Your answer can not be blank\n";
+		next;
+	    }
+	}
+	$entered_configs{$config} = ${ans};
+	last;
+    }
+}
+
+sub show_time {
+    my ($time) = @_;
+
+    my $hours = 0;
+    my $minutes = 0;
+
+    if ($time > 3600) {
+	$hours = int($time / 3600);
+	$time -= $hours * 3600;
+    }
+    if ($time > 60) {
+	$minutes = int($time / 60);
+	$time -= $minutes * 60;
+    }
+
+    if ($hours > 0) {
+	doprint "$hours hour";
+	doprint "s" if ($hours > 1);
+	doprint " ";
+    }
+
+    if ($minutes > 0) {
+	doprint "$minutes minute";
+	doprint "s" if ($minutes > 1);
+	doprint " ";
+    }
+
+    doprint "$time second";
+    doprint "s" if ($time != 1);
+}
+
+sub print_times {
+    doprint "\n";
+    if ($build_time) {
+	doprint "Build time:   ";
+	show_time($build_time);
+	doprint "\n";
+    }
+    if ($install_time) {
+	doprint "Install time: ";
+	show_time($install_time);
+	doprint "\n";
+    }
+    if ($reboot_time) {
+	doprint "Reboot time:  ";
+	show_time($reboot_time);
+	doprint "\n";
+    }
+    if ($test_time) {
+	doprint "Test time:    ";
+	show_time($test_time);
+	doprint "\n";
+    }
+    # reset for iterations like bisect
+    $build_time = 0;
+    $install_time = 0;
+    $reboot_time = 0;
+    $test_time = 0;
+}
+
+sub get_mandatory_configs {
+    get_mandatory_config("MACHINE");
+    get_mandatory_config("BUILD_DIR");
+    get_mandatory_config("OUTPUT_DIR");
+
+    if ($newconfig) {
+	get_mandatory_config("BUILD_OPTIONS");
+    }
+
+    # options required for other than just building a kernel
+    if (!$buildonly) {
+	get_mandatory_config("POWER_CYCLE");
+	get_mandatory_config("CONSOLE");
+    }
+
+    # options required for install and more
+    if ($buildonly != 1) {
+	get_mandatory_config("SSH_USER");
+	get_mandatory_config("BUILD_TARGET");
+	get_mandatory_config("TARGET_IMAGE");
+    }
+
+    get_mandatory_config("LOCALVERSION");
+
+    return if ($buildonly);
+
+    my $rtype = $opt{"REBOOT_TYPE"};
+
+    if (!defined($rtype)) {
+	if (!defined($opt{"GRUB_MENU"})) {
+	    get_mandatory_config("REBOOT_TYPE");
+	    $rtype = $entered_configs{"REBOOT_TYPE"};
+	} else {
+	    $rtype = "grub";
+	}
+    }
+
+    if ($rtype eq "grub") {
+	get_mandatory_config("GRUB_MENU");
+    }
+
+    if ($rtype eq "grub2") {
+	get_mandatory_config("GRUB_MENU");
+	get_mandatory_config("GRUB_FILE");
+    }
+
+    if ($rtype eq "syslinux") {
+	get_mandatory_config("SYSLINUX_LABEL");
+    }
+}
+
+sub process_variables {
+    my ($value, $remove_undef) = @_;
+    my $retval = "";
+
+    # We want to check for '\', and it is just easier
+    # to check the previous characet of '$' and not need
+    # to worry if '$' is the first character. By adding
+    # a space to $value, we can just check [^\\]\$ and
+    # it will still work.
+    $value = " $value";
+
+    while ($value =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) {
+	my $begin = $1;
+	my $var = $2;
+	my $end = $3;
+	# append beginning of value to retval
+	$retval = "$retval$begin";
+	if (defined($variable{$var})) {
+	    $retval = "$retval$variable{$var}";
+	} elsif (defined($remove_undef) && $remove_undef) {
+	    # for if statements, any variable that is not defined,
+	    # we simple convert to 0
+	    $retval = "${retval}0";
+	} else {
+	    # put back the origin piece.
+	    $retval = "$retval\$\{$var\}";
+	    # This could be an option that is used later, save
+	    # it so we don't warn if this option is not one of
+	    # ktests options.
+	    $used_options{$var} = 1;
+	}
+	$value = $end;
+    }
+    $retval = "$retval$value";
+
+    # remove the space added in the beginning
+    $retval =~ s/ //;
+
+    return "$retval"
+}
+
+sub set_value {
+    my ($lvalue, $rvalue, $override, $overrides, $name) = @_;
+
+    my $prvalue = process_variables($rvalue);
+
+    if ($lvalue =~ /^(TEST|BISECT|CONFIG_BISECT)_TYPE(\[.*\])?$/ &&
+	$prvalue !~ /^(config_|)bisect$/ &&
+	$prvalue !~ /^build$/ &&
+	$buildonly) {
+
+	# Note if a test is something other than build, then we
+	# will need other mandatory options.
+	if ($prvalue ne "install") {
+	    $buildonly = 0;
+	} else {
+	    # install still limits some mandatory options.
+	    $buildonly = 2;
+	}
+    }
+
+    if (defined($opt{$lvalue})) {
+	if (!$override || defined(${$overrides}{$lvalue})) {
+	    my $extra = "";
+	    if ($override) {
+		$extra = "In the same override section!\n";
+	    }
+	    die "$name: $.: Option $lvalue defined more than once!\n$extra";
+	}
+	${$overrides}{$lvalue} = $prvalue;
+    }
+
+    $opt{$lvalue} = $prvalue;
+}
+
+sub set_eval {
+    my ($lvalue, $rvalue, $name) = @_;
+
+    my $prvalue = process_variables($rvalue);
+    my $arr;
+
+    if (defined($evals{$lvalue})) {
+	$arr = $evals{$lvalue};
+    } else {
+	$arr = [];
+	$evals{$lvalue} = $arr;
+    }
+
+    push @{$arr}, $rvalue;
+}
+
+sub set_variable {
+    my ($lvalue, $rvalue) = @_;
+
+    if ($rvalue =~ /^\s*$/) {
+	delete $variable{$lvalue};
+    } else {
+	$rvalue = process_variables($rvalue);
+	$variable{$lvalue} = $rvalue;
+    }
+}
+
+sub process_compare {
+    my ($lval, $cmp, $rval) = @_;
+
+    # remove whitespace
+
+    $lval =~ s/^\s*//;
+    $lval =~ s/\s*$//;
+
+    $rval =~ s/^\s*//;
+    $rval =~ s/\s*$//;
+
+    if ($cmp eq "==") {
+	return $lval eq $rval;
+    } elsif ($cmp eq "!=") {
+	return $lval ne $rval;
+    } elsif ($cmp eq "=~") {
+	return $lval =~ m/$rval/;
+    } elsif ($cmp eq "!~") {
+	return $lval !~ m/$rval/;
+    }
+
+    my $statement = "$lval $cmp $rval";
+    my $ret = eval $statement;
+
+    # $@ stores error of eval
+    if ($@) {
+	return -1;
+    }
+
+    return $ret;
+}
+
+sub value_defined {
+    my ($val) = @_;
+
+    return defined($variable{$2}) ||
+	defined($opt{$2});
+}
+
+my $d = 0;
+sub process_expression {
+    my ($name, $val) = @_;
+
+    my $c = $d++;
+
+    while ($val =~ s/\(([^\(]*?)\)/\&\&\&\&VAL\&\&\&\&/) {
+	my $express = $1;
+
+	if (process_expression($name, $express)) {
+	    $val =~ s/\&\&\&\&VAL\&\&\&\&/ 1 /;
+	} else {
+	    $val =~ s/\&\&\&\&VAL\&\&\&\&/ 0 /;
+	}
+    }
+
+    $d--;
+    my $OR = "\\|\\|";
+    my $AND = "\\&\\&";
+
+    while ($val =~ s/^(.*?)($OR|$AND)//) {
+	my $express = $1;
+	my $op = $2;
+
+	if (process_expression($name, $express)) {
+	    if ($op eq "||") {
+		return 1;
+	    }
+	} else {
+	    if ($op eq "&&") {
+		return 0;
+	    }
+	}
+    }
+
+    if ($val =~ /(.*)(==|\!=|>=|<=|>|<|=~|\!~)(.*)/) {
+	my $ret = process_compare($1, $2, $3);
+	if ($ret < 0) {
+	    die "$name: $.: Unable to process comparison\n";
+	}
+	return $ret;
+    }
+
+    if ($val =~ /^\s*(NOT\s*)?DEFINED\s+(\S+)\s*$/) {
+	if (defined $1) {
+	    return !value_defined($2);
+	} else {
+	    return value_defined($2);
+	}
+    }
+
+    if ($val =~ /^\s*0\s*$/) {
+	return 0;
+    } elsif ($val =~ /^\s*\d+\s*$/) {
+	return 1;
+    }
+
+    die ("$name: $.: Undefined content $val in if statement\n");
+}
+
+sub process_if {
+    my ($name, $value) = @_;
+
+    # Convert variables and replace undefined ones with 0
+    my $val = process_variables($value, 1);
+    my $ret = process_expression $name, $val;
+
+    return $ret;
+}
+
+sub __read_config {
+    my ($config, $current_test_num) = @_;
+
+    my $in;
+    open($in, $config) || die "can't read file $config";
+
+    my $name = $config;
+    $name =~ s,.*/(.*),$1,;
+
+    my $test_num = $$current_test_num;
+    my $default = 1;
+    my $repeat = 1;
+    my $num_tests_set = 0;
+    my $skip = 0;
+    my $rest;
+    my $line;
+    my $test_case = 0;
+    my $if = 0;
+    my $if_set = 0;
+    my $override = 0;
+
+    my %overrides;
+
+    while (<$in>) {
+
+	# ignore blank lines and comments
+	next if (/^\s*$/ || /\s*\#/);
+
+	if (/^\s*(TEST_START|DEFAULTS)\b(.*)/) {
+
+	    my $type = $1;
+	    $rest = $2;
+	    $line = $2;
+
+	    my $old_test_num;
+	    my $old_repeat;
+	    $override = 0;
+
+	    if ($type eq "TEST_START") {
+
+		if ($num_tests_set) {
+		    die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+		}
+
+		$old_test_num = $test_num;
+		$old_repeat = $repeat;
+
+		$test_num += $repeat;
+		$default = 0;
+		$repeat = 1;
+	    } else {
+		$default = 1;
+	    }
+
+	    # If SKIP is anywhere in the line, the command will be skipped
+	    if ($rest =~ s/\s+SKIP\b//) {
+		$skip = 1;
+	    } else {
+		$test_case = 1;
+		$skip = 0;
+	    }
+
+	    if ($rest =~ s/\sELSE\b//) {
+		if (!$if) {
+		    die "$name: $.: ELSE found with out matching IF section\n$_";
+		}
+		$if = 0;
+
+		if ($if_set) {
+		    $skip = 1;
+		} else {
+		    $skip = 0;
+		}
+	    }
+
+	    if ($rest =~ s/\sIF\s+(.*)//) {
+		if (process_if($name, $1)) {
+		    $if_set = 1;
+		} else {
+		    $skip = 1;
+		}
+		$if = 1;
+	    } else {
+		$if = 0;
+		$if_set = 0;
+	    }
+
+	    if (!$skip) {
+		if ($type eq "TEST_START") {
+		    if ($rest =~ s/\s+ITERATE\s+(\d+)//) {
+			$repeat = $1;
+			$repeat_tests{"$test_num"} = $repeat;
+		    }
+		} elsif ($rest =~ s/\sOVERRIDE\b//) {
+		    # DEFAULT only
+		    $override = 1;
+		    # Clear previous overrides
+		    %overrides = ();
+		}
+	    }
+
+	    if (!$skip && $rest !~ /^\s*$/) {
+		die "$name: $.: Gargbage found after $type\n$_";
+	    }
+
+	    if ($skip && $type eq "TEST_START") {
+		$test_num = $old_test_num;
+		$repeat = $old_repeat;
+	    }
+
+	} elsif (/^\s*ELSE\b(.*)$/) {
+	    if (!$if) {
+		die "$name: $.: ELSE found with out matching IF section\n$_";
+	    }
+	    $rest = $1;
+	    if ($if_set) {
+		$skip = 1;
+		$rest = "";
+	    } else {
+		$skip = 0;
+
+		if ($rest =~ /\sIF\s+(.*)/) {
+		    # May be a ELSE IF section.
+		    if (process_if($name, $1)) {
+			$if_set = 1;
+		    } else {
+			$skip = 1;
+		    }
+		    $rest = "";
+		} else {
+		    $if = 0;
+		}
+	    }
+
+	    if ($rest !~ /^\s*$/) {
+		die "$name: $.: Gargbage found after DEFAULTS\n$_";
+	    }
+
+	} elsif (/^\s*INCLUDE\s+(\S+)/) {
+
+	    next if ($skip);
+
+	    if (!$default) {
+		die "$name: $.: INCLUDE can only be done in default sections\n$_";
+	    }
+
+	    my $file = process_variables($1);
+
+	    if ($file !~ m,^/,) {
+		# check the path of the config file first
+		if ($config =~ m,(.*)/,) {
+		    if (-f "$1/$file") {
+			$file = "$1/$file";
+		    }
+		}
+	    }
+		
+	    if ( ! -r $file ) {
+		die "$name: $.: Can't read file $file\n$_";
+	    }
+
+	    if (__read_config($file, \$test_num)) {
+		$test_case = 1;
+	    }
+
+	} elsif (/^\s*([A-Z_\[\]\d]+)\s*=~\s*(.*?)\s*$/) {
+
+	    next if ($skip);
+
+	    my $lvalue = $1;
+	    my $rvalue = $2;
+
+	    if ($default || $lvalue =~ /\[\d+\]$/) {
+		set_eval($lvalue, $rvalue, $name);
+	    } else {
+		my $val = "$lvalue\[$test_num\]";
+		set_eval($val, $rvalue, $name);
+	    }
+
+	} elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) {
+
+	    next if ($skip);
+
+	    my $lvalue = $1;
+	    my $rvalue = $2;
+
+	    if (!$default &&
+		($lvalue eq "NUM_TESTS" ||
+		 $lvalue eq "LOG_FILE" ||
+		 $lvalue eq "CLEAR_LOG")) {
+		die "$name: $.: $lvalue must be set in DEFAULTS section\n";
+	    }
+
+	    if ($lvalue eq "NUM_TESTS") {
+		if ($test_num) {
+		    die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+		}
+		if (!$default) {
+		    die "$name: $.: NUM_TESTS must be set in default section\n";
+		}
+		$num_tests_set = 1;
+	    }
+
+	    if ($default || $lvalue =~ /\[\d+\]$/) {
+		set_value($lvalue, $rvalue, $override, \%overrides, $name);
+	    } else {
+		my $val = "$lvalue\[$test_num\]";
+		set_value($val, $rvalue, $override, \%overrides, $name);
+
+		if ($repeat > 1) {
+		    $repeats{$val} = $repeat;
+		}
+	    }
+	} elsif (/^\s*([A-Z_\[\]\d]+)\s*:=\s*(.*?)\s*$/) {
+	    next if ($skip);
+
+	    my $lvalue = $1;
+	    my $rvalue = $2;
+
+	    # process config variables.
+	    # Config variables are only active while reading the
+	    # config and can be defined anywhere. They also ignore
+	    # TEST_START and DEFAULTS, but are skipped if they are in
+	    # on of these sections that have SKIP defined.
+	    # The save variable can be
+	    # defined multiple times and the new one simply overrides
+	    # the prevous one.
+	    set_variable($lvalue, $rvalue);
+
+	} else {
+	    die "$name: $.: Garbage found in config\n$_";
+	}
+    }
+
+    if ($test_num) {
+	$test_num += $repeat - 1;
+	$opt{"NUM_TESTS"} = $test_num;
+    }
+
+    close($in);
+
+    $$current_test_num = $test_num;
+
+    return $test_case;
+}
+
+sub get_test_case {
+	print "What test case would you like to run?\n";
+	print " (build, install or boot)\n";
+	print " Other tests are available but require editing ktest.conf\n";
+	print " (see tools/testing/ktest/sample.conf)\n";
+	my $ans = <STDIN>;
+	chomp $ans;
+	$default{"TEST_TYPE"} = $ans;
+}
+
+sub read_config {
+    my ($config) = @_;
+
+    my $test_case;
+    my $test_num = 0;
+
+    $test_case = __read_config $config, \$test_num;
+
+    # make sure we have all mandatory configs
+    get_mandatory_configs;
+
+    # was a test specified?
+    if (!$test_case) {
+	print "No test case specified.\n";
+	get_test_case;
+    }
+
+    # set any defaults
+
+    foreach my $default (keys %default) {
+	if (!defined($opt{$default})) {
+	    $opt{$default} = $default{$default};
+	}
+    }
+
+    if ($opt{"IGNORE_UNUSED"} == 1) {
+	return;
+    }
+
+    my %not_used;
+
+    # check if there are any stragglers (typos?)
+    foreach my $option (keys %opt) {
+	my $op = $option;
+	# remove per test labels.
+	$op =~ s/\[.*\]//;
+	if (!exists($option_map{$op}) &&
+	    !exists($default{$op}) &&
+	    !exists($used_options{$op})) {
+	    $not_used{$op} = 1;
+	}
+    }
+
+    if (%not_used) {
+	my $s = "s are";
+	$s = " is" if (keys %not_used == 1);
+	print "The following option$s not used; could be a typo:\n";
+	foreach my $option (keys %not_used) {
+	    print "$option\n";
+	}
+	print "Set IGRNORE_UNUSED = 1 to have ktest ignore unused variables\n";
+	if (!read_yn "Do you want to continue?") {
+	    exit -1;
+	}
+    }
+}
+
+sub __eval_option {
+    my ($name, $option, $i) = @_;
+
+    # Add space to evaluate the character before $
+    $option = " $option";
+    my $retval = "";
+    my $repeated = 0;
+    my $parent = 0;
+
+    foreach my $test (keys %repeat_tests) {
+	if ($i >= $test &&
+	    $i < $test + $repeat_tests{$test}) {
+
+	    $repeated = 1;
+	    $parent = $test;
+	    last;
+	}
+    }
+
+    while ($option =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) {
+	my $start = $1;
+	my $var = $2;
+	my $end = $3;
+
+	# Append beginning of line
+	$retval = "$retval$start";
+
+	# If the iteration option OPT[$i] exists, then use that.
+	# otherwise see if the default OPT (without [$i]) exists.
+
+	my $o = "$var\[$i\]";
+	my $parento = "$var\[$parent\]";
+
+	# If a variable contains itself, use the default var
+	if (($var eq $name) && defined($opt{$var})) {
+	    $o = $opt{$var};
+	    $retval = "$retval$o";
+	} elsif (defined($opt{$o})) {
+	    $o = $opt{$o};
+	    $retval = "$retval$o";
+	} elsif ($repeated && defined($opt{$parento})) {
+	    $o = $opt{$parento};
+	    $retval = "$retval$o";
+	} elsif (defined($opt{$var})) {
+	    $o = $opt{$var};
+	    $retval = "$retval$o";
+	} elsif ($var eq "KERNEL_VERSION" && defined($make)) {
+	    # special option KERNEL_VERSION uses kernel version
+	    get_version();
+	    $retval = "$retval$version";
+	} else {
+	    $retval = "$retval\$\{$var\}";
+	}
+
+	$option = $end;
+    }
+
+    $retval = "$retval$option";
+
+    $retval =~ s/^ //;
+
+    return $retval;
+}
+
+sub process_evals {
+    my ($name, $option, $i) = @_;
+
+    my $option_name = "$name\[$i\]";
+    my $ev;
+
+    my $old_option = $option;
+
+    if (defined($evals{$option_name})) {
+	$ev = $evals{$option_name};
+    } elsif (defined($evals{$name})) {
+	$ev = $evals{$name};
+    } else {
+	return $option;
+    }
+
+    for my $e (@{$ev}) {
+	eval "\$option =~ $e";
+    }
+
+    if ($option ne $old_option) {
+	doprint("$name changed from '$old_option' to '$option'\n");
+    }
+
+    return $option;
+}
+
+sub eval_option {
+    my ($name, $option, $i) = @_;
+
+    my $prev = "";
+
+    # Since an option can evaluate to another option,
+    # keep iterating until we do not evaluate any more
+    # options.
+    my $r = 0;
+    while ($prev ne $option) {
+	# Check for recursive evaluations.
+	# 100 deep should be more than enough.
+	if ($r++ > 100) {
+	    die "Over 100 evaluations accurred with $option\n" .
+		"Check for recursive variables\n";
+	}
+	$prev = $option;
+	$option = __eval_option($name, $option, $i);
+    }
+
+    $option = process_evals($name, $option, $i);
+
+    return $option;
+}
+
+sub run_command;
+sub start_monitor;
+sub end_monitor;
+sub wait_for_monitor;
+
+sub reboot {
+    my ($time) = @_;
+    my $powercycle = 0;
+
+    # test if the machine can be connected to within a few seconds
+    my $stat = run_ssh("echo check machine status", $connect_timeout);
+    if (!$stat) {
+	doprint("power cycle\n");
+	$powercycle = 1;
+    }
+
+    if ($powercycle) {
+	run_command "$power_cycle";
+
+	start_monitor;
+	# flush out current monitor
+	# May contain the reboot success line
+	wait_for_monitor 1;
+
+    } else {
+	# Make sure everything has been written to disk
+	run_ssh("sync", 10);
+
+	if (defined($time)) {
+	    start_monitor;
+	    # flush out current monitor
+	    # May contain the reboot success line
+	    wait_for_monitor 1;
+	}
+
+	# try to reboot normally
+	if (run_command $reboot) {
+	    if (defined($powercycle_after_reboot)) {
+		sleep $powercycle_after_reboot;
+		run_command "$power_cycle";
+	    }
+	} else {
+	    # nope? power cycle it.
+	    run_command "$power_cycle";
+	}
+    }
+
+    if (defined($time)) {
+
+	# We only want to get to the new kernel, don't fail
+	# if we stumble over a call trace.
+	my $save_ignore_errors = $ignore_errors;
+	$ignore_errors = 1;
+
+	# Look for the good kernel to boot
+	if (wait_for_monitor($time, "Linux version")) {
+	    # reboot got stuck?
+	    doprint "Reboot did not finish. Forcing power cycle\n";
+	    run_command "$power_cycle";
+	}
+
+	$ignore_errors = $save_ignore_errors;
+
+	# Still need to wait for the reboot to finish
+	wait_for_monitor($time, $reboot_success_line);
+
+	end_monitor;
+    }
+}
+
+sub reboot_to_good {
+    my ($time) = @_;
+
+    if (defined($switch_to_good)) {
+	run_command $switch_to_good;
+    }
+
+    reboot $time;
+}
+
+sub do_not_reboot {
+    my $i = $iteration;
+
+    return $test_type eq "build" || $no_reboot ||
+	($test_type eq "patchcheck" && $opt{"PATCHCHECK_TYPE[$i]"} eq "build") ||
+	($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build") ||
+	($test_type eq "config_bisect" && $opt{"CONFIG_BISECT_TYPE[$i]"} eq "build");
+}
+
+my $in_die = 0;
+
+sub dodie {
+
+    # avoid recusion
+    return if ($in_die);
+    $in_die = 1;
+
+    doprint "CRITICAL FAILURE... ", @_, "\n";
+
+    my $i = $iteration;
+
+    if ($reboot_on_error && !do_not_reboot) {
+
+	doprint "REBOOTING\n";
+	reboot_to_good;
+
+    } elsif ($poweroff_on_error && defined($power_off)) {
+	doprint "POWERING OFF\n";
+	`$power_off`;
+    }
+
+    if (defined($opt{"LOG_FILE"})) {
+	print " See $opt{LOG_FILE} for more info.\n";
+    }
+
+    if ($email_on_error) {
+        send_email("KTEST: critical failure for your [$test_type] test",
+                "Your test started at $script_start_time has failed with:\n@_\n");
+    }
+
+    if ($monitor_cnt) {
+	    # restore terminal settings
+	    system("stty $stty_orig");
+    }
+
+    if (defined($post_test)) {
+	run_command $post_test;
+    }
+
+    die @_, "\n";
+}
+
+sub create_pty {
+    my ($ptm, $pts) = @_;
+    my $tmp;
+    my $TIOCSPTLCK = 0x40045431;
+    my $TIOCGPTN = 0x80045430;
+
+    sysopen($ptm, "/dev/ptmx", O_RDWR | O_NONBLOCK) or
+	dodie "Cant open /dev/ptmx";
+
+    # unlockpt()
+    $tmp = pack("i", 0);
+    ioctl($ptm, $TIOCSPTLCK, $tmp) or
+	dodie "ioctl TIOCSPTLCK for /dev/ptmx failed";
+
+    # ptsname()
+    ioctl($ptm, $TIOCGPTN, $tmp) or
+	dodie "ioctl TIOCGPTN for /dev/ptmx failed";
+    $tmp = unpack("i", $tmp);
+
+    sysopen($pts, "/dev/pts/$tmp", O_RDWR | O_NONBLOCK) or
+	dodie "Can't open /dev/pts/$tmp";
+}
+
+sub exec_console {
+    my ($ptm, $pts) = @_;
+
+    close($ptm);
+
+    close(\*STDIN);
+    close(\*STDOUT);
+    close(\*STDERR);
+
+    open(\*STDIN, '<&', $pts);
+    open(\*STDOUT, '>&', $pts);
+    open(\*STDERR, '>&', $pts);
+
+    close($pts);
+
+    exec $console or
+	dodie "Can't open console $console";
+}
+
+sub open_console {
+    my ($ptm) = @_;
+    my $pts = \*PTSFD;
+    my $pid;
+
+    # save terminal settings
+    $stty_orig = `stty -g`;
+
+    # place terminal in cbreak mode so that stdin can be read one character at
+    # a time without having to wait for a newline
+    system("stty -icanon -echo -icrnl");
+
+    create_pty($ptm, $pts);
+
+    $pid = fork;
+
+    if (!$pid) {
+	# child
+	exec_console($ptm, $pts)
+    }
+
+    # parent
+    close($pts);
+
+    return $pid;
+
+    open(PTSFD, "Stop perl from warning about single use of PTSFD");
+}
+
+sub close_console {
+    my ($fp, $pid) = @_;
+
+    doprint "kill child process $pid\n";
+    kill $close_console_signal, $pid;
+
+    doprint "wait for child process $pid to exit\n";
+    waitpid($pid, 0);
+
+    print "closing!\n";
+    close($fp);
+
+    # restore terminal settings
+    system("stty $stty_orig");
+}
+
+sub start_monitor {
+    if ($monitor_cnt++) {
+	return;
+    }
+    $monitor_fp = \*MONFD;
+    $monitor_pid = open_console $monitor_fp;
+
+    return;
+
+    open(MONFD, "Stop perl from warning about single use of MONFD");
+}
+
+sub end_monitor {
+    return if (!defined $console);
+    if (--$monitor_cnt) {
+	return;
+    }
+    close_console($monitor_fp, $monitor_pid);
+}
+
+sub wait_for_monitor {
+    my ($time, $stop) = @_;
+    my $full_line = "";
+    my $line;
+    my $booted = 0;
+    my $start_time = time;
+    my $skip_call_trace = 0;
+    my $bug = 0;
+    my $bug_ignored = 0;
+    my $now;
+
+    doprint "** Wait for monitor to settle down **\n";
+
+    # read the monitor and wait for the system to calm down
+    while (!$booted) {
+	$line = wait_for_input($monitor_fp, $time);
+	last if (!defined($line));
+	print "$line";
+	$full_line .= $line;
+
+	if (defined($stop) && $full_line =~ /$stop/) {
+	    doprint "wait for monitor detected $stop\n";
+	    $booted = 1;
+	}
+
+	if ($full_line =~ /\[ backtrace testing \]/) {
+	    $skip_call_trace = 1;
+	}
+
+	if ($full_line =~ /call trace:/i) {
+	    if (!$bug && !$skip_call_trace) {
+		if ($ignore_errors) {
+		    $bug_ignored = 1;
+		} else {
+		    $bug = 1;
+		}
+	    }
+	}
+
+	if ($full_line =~ /\[ end of backtrace testing \]/) {
+	    $skip_call_trace = 0;
+	}
+
+	if ($full_line =~ /Kernel panic -/) {
+	    $bug = 1;
+	}
+
+	if ($line =~ /\n/) {
+	    $full_line = "";
+	}
+	$now = time;
+	if ($now - $start_time >= $max_monitor_wait) {
+	    doprint "Exiting monitor flush due to hitting MAX_MONITOR_WAIT\n";
+	    return 1;
+	}
+    }
+    print "** Monitor flushed **\n";
+
+    # if stop is defined but wasn't hit, return error
+    # used by reboot (which wants to see a reboot)
+    if (defined($stop) && !$booted) {
+	$bug = 1;
+    }
+    return $bug;
+}
+
+sub save_logs {
+	my ($result, $basedir) = @_;
+	my @t = localtime;
+	my $date = sprintf "%04d%02d%02d%02d%02d%02d",
+		1900+$t[5],$t[4],$t[3],$t[2],$t[1],$t[0];
+
+	my $type = $build_type;
+	if ($type =~ /useconfig/) {
+	    $type = "useconfig";
+	}
+
+	my $dir = "$machine-$test_type-$type-$result-$date";
+
+	$dir = "$basedir/$dir";
+
+	if (!-d $dir) {
+	    mkpath($dir) or
+		dodie "can't create $dir";
+	}
+
+	my %files = (
+		"config" => $output_config,
+		"buildlog" => $buildlog,
+		"dmesg" => $dmesg,
+		"testlog" => $testlog,
+	);
+
+	while (my ($name, $source) = each(%files)) {
+		if (-f "$source") {
+			cp "$source", "$dir/$name" or
+				dodie "failed to copy $source";
+		}
+	}
+
+	doprint "*** Saved info to $dir ***\n";
+}
+
+sub fail {
+
+	if ($die_on_failure) {
+		dodie @_;
+	}
+
+	doprint "FAILED\n";
+
+	my $i = $iteration;
+
+	# no need to reboot for just building.
+	if (!do_not_reboot) {
+	    doprint "REBOOTING\n";
+	    reboot_to_good $sleep_time;
+	}
+
+	my $name = "";
+
+	if (defined($test_name)) {
+	    $name = " ($test_name)";
+	}
+
+	print_times;
+
+	doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+	doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+	doprint "KTEST RESULT: TEST $i$name Failed: ", @_, "\n";
+	doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+	doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+
+	if (defined($store_failures)) {
+	    save_logs "fail", $store_failures;
+        }
+
+	if (defined($post_test)) {
+		run_command $post_test;
+	}
+
+	return 1;
+}
+
+sub run_command {
+    my ($command, $redirect, $timeout) = @_;
+    my $start_time;
+    my $end_time;
+    my $dolog = 0;
+    my $dord = 0;
+    my $dostdout = 0;
+    my $pid;
+
+    $command =~ s/\$SSH_USER/$ssh_user/g;
+    $command =~ s/\$MACHINE/$machine/g;
+
+    doprint("$command ... ");
+    $start_time = time;
+
+    $pid = open(CMD, "$command 2>&1 |") or
+	(fail "unable to exec $command" and return 0);
+
+    if (defined($opt{"LOG_FILE"})) {
+	open(LOG, ">>$opt{LOG_FILE}") or
+	    dodie "failed to write to log";
+	$dolog = 1;
+    }
+
+    if (defined($redirect)) {
+	if ($redirect eq 1) {
+	    $dostdout = 1;
+	    # Have the output of the command on its own line
+	    doprint "\n";
+	} else {
+	    open (RD, ">$redirect") or
+		dodie "failed to write to redirect $redirect";
+	    $dord = 1;
+	}
+    }
+
+    my $hit_timeout = 0;
+
+    while (1) {
+	my $fp = \*CMD;
+	if (defined($timeout)) {
+	    doprint "timeout = $timeout\n";
+	}
+	my $line = wait_for_input($fp, $timeout);
+	if (!defined($line)) {
+	    my $now = time;
+	    if (defined($timeout) && (($now - $start_time) >= $timeout)) {
+		doprint "Hit timeout of $timeout, killing process\n";
+		$hit_timeout = 1;
+		kill 9, $pid;
+	    }
+	    last;
+	}
+	print LOG $line if ($dolog);
+	print RD $line if ($dord);
+	print $line if ($dostdout);
+    }
+
+    waitpid($pid, 0);
+    # shift 8 for real exit status
+    $run_command_status = $? >> 8;
+
+    close(CMD);
+    close(LOG) if ($dolog);
+    close(RD)  if ($dord);
+
+    $end_time = time;
+    my $delta = $end_time - $start_time;
+
+    if ($delta == 1) {
+	doprint "[1 second] ";
+    } else {
+	doprint "[$delta seconds] ";
+    }
+
+    if ($hit_timeout) {
+	$run_command_status = 1;
+    }
+
+    if ($run_command_status) {
+	doprint "FAILED!\n";
+    } else {
+	doprint "SUCCESS\n";
+    }
+
+    return !$run_command_status;
+}
+
+sub run_ssh {
+    my ($cmd, $timeout) = @_;
+    my $cp_exec = $ssh_exec;
+
+    $cp_exec =~ s/\$SSH_COMMAND/$cmd/g;
+    return run_command "$cp_exec", undef , $timeout;
+}
+
+sub run_scp {
+    my ($src, $dst, $cp_scp) = @_;
+
+    $cp_scp =~ s/\$SRC_FILE/$src/g;
+    $cp_scp =~ s/\$DST_FILE/$dst/g;
+
+    return run_command "$cp_scp";
+}
+
+sub run_scp_install {
+    my ($src, $dst) = @_;
+
+    my $cp_scp = $scp_to_target_install;
+
+    return run_scp($src, $dst, $cp_scp);
+}
+
+sub run_scp_mod {
+    my ($src, $dst) = @_;
+
+    my $cp_scp = $scp_to_target;
+
+    return run_scp($src, $dst, $cp_scp);
+}
+
+sub get_grub2_index {
+
+    return if (defined($grub_number) && defined($last_grub_menu) &&
+	       $last_grub_menu eq $grub_menu && defined($last_machine) &&
+	       $last_machine eq $machine);
+
+    doprint "Find grub2 menu ... ";
+    $grub_number = -1;
+
+    my $ssh_grub = $ssh_exec;
+    $ssh_grub =~ s,\$SSH_COMMAND,cat $grub_file,g;
+
+    open(IN, "$ssh_grub |")
+	or dodie "unable to get $grub_file";
+
+    my $found = 0;
+
+    while (<IN>) {
+	if (/^menuentry.*$grub_menu/) {
+	    $grub_number++;
+	    $found = 1;
+	    last;
+	} elsif (/^menuentry\s|^submenu\s/) {
+	    $grub_number++;
+	}
+    }
+    close(IN);
+
+    dodie "Could not find '$grub_menu' in $grub_file on $machine"
+	if (!$found);
+    doprint "$grub_number\n";
+    $last_grub_menu = $grub_menu;
+    $last_machine = $machine;
+}
+
+sub get_grub_index {
+
+    if ($reboot_type eq "grub2") {
+	get_grub2_index;
+	return;
+    }
+
+    if ($reboot_type ne "grub") {
+	return;
+    }
+    return if (defined($grub_number) && defined($last_grub_menu) &&
+	       $last_grub_menu eq $grub_menu && defined($last_machine) &&
+	       $last_machine eq $machine);
+
+    doprint "Find grub menu ... ";
+    $grub_number = -1;
+
+    my $ssh_grub = $ssh_exec;
+    $ssh_grub =~ s,\$SSH_COMMAND,cat /boot/grub/menu.lst,g;
+
+    open(IN, "$ssh_grub |")
+	or dodie "unable to get menu.lst";
+
+    my $found = 0;
+
+    while (<IN>) {
+	if (/^\s*title\s+$grub_menu\s*$/) {
+	    $grub_number++;
+	    $found = 1;
+	    last;
+	} elsif (/^\s*title\s/) {
+	    $grub_number++;
+	}
+    }
+    close(IN);
+
+    dodie "Could not find '$grub_menu' in /boot/grub/menu on $machine"
+	if (!$found);
+    doprint "$grub_number\n";
+    $last_grub_menu = $grub_menu;
+    $last_machine = $machine;
+}
+
+sub wait_for_input
+{
+    my ($fp, $time) = @_;
+    my $start_time;
+    my $rin;
+    my $rout;
+    my $nr;
+    my $buf;
+    my $line;
+    my $ch;
+
+    if (!defined($time)) {
+	$time = $timeout;
+    }
+
+    $rin = '';
+    vec($rin, fileno($fp), 1) = 1;
+    vec($rin, fileno(\*STDIN), 1) = 1;
+
+    $start_time = time;
+
+    while (1) {
+	$nr = select($rout=$rin, undef, undef, $time);
+
+	last if ($nr <= 0);
+
+	# copy data from stdin to the console
+	if (vec($rout, fileno(\*STDIN), 1) == 1) {
+	    $nr = sysread(\*STDIN, $buf, 1000);
+	    syswrite($fp, $buf, $nr) if ($nr > 0);
+	}
+
+	# The timeout is based on time waiting for the fp data
+	if (vec($rout, fileno($fp), 1) != 1) {
+	    last if (defined($time) && (time - $start_time > $time));
+	    next;
+	}
+
+	$line = "";
+
+	# try to read one char at a time
+	while (sysread $fp, $ch, 1) {
+	    $line .= $ch;
+	    last if ($ch eq "\n");
+	}
+
+	last if (!length($line));
+
+	return $line;
+    }
+    return undef;
+}
+
+sub reboot_to {
+    if (defined($switch_to_test)) {
+	run_command $switch_to_test;
+    }
+
+    if ($reboot_type eq "grub") {
+	run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'";
+    } elsif ($reboot_type eq "grub2") {
+	run_ssh "$grub_reboot $grub_number";
+    } elsif ($reboot_type eq "syslinux") {
+	run_ssh "$syslinux --once \\\"$syslinux_label\\\" $syslinux_path";
+    } elsif (defined $reboot_script) {
+	run_command "$reboot_script";
+    }
+    reboot;
+}
+
+sub get_sha1 {
+    my ($commit) = @_;
+
+    doprint "git rev-list --max-count=1 $commit ... ";
+    my $sha1 = `git rev-list --max-count=1 $commit`;
+    my $ret = $?;
+
+    logit $sha1;
+
+    if ($ret) {
+	doprint "FAILED\n";
+	dodie "Failed to get git $commit";
+    }
+
+    print "SUCCESS\n";
+
+    chomp $sha1;
+
+    return $sha1;
+}
+
+sub monitor {
+    my $booted = 0;
+    my $bug = 0;
+    my $bug_ignored = 0;
+    my $skip_call_trace = 0;
+    my $loops;
+
+    my $start_time = time;
+
+    wait_for_monitor 5;
+
+    my $line;
+    my $full_line = "";
+
+    open(DMESG, "> $dmesg") or
+	dodie "unable to write to $dmesg";
+
+    reboot_to;
+
+    my $success_start;
+    my $failure_start;
+    my $monitor_start = time;
+    my $done = 0;
+    my $version_found = 0;
+
+    while (!$done) {
+
+	if ($bug && defined($stop_after_failure) &&
+	    $stop_after_failure >= 0) {
+	    my $time = $stop_after_failure - (time - $failure_start);
+	    $line = wait_for_input($monitor_fp, $time);
+	    if (!defined($line)) {
+		doprint "bug timed out after $booted_timeout seconds\n";
+		doprint "Test forced to stop after $stop_after_failure seconds after failure\n";
+		last;
+	    }
+	} elsif ($booted) {
+	    $line = wait_for_input($monitor_fp, $booted_timeout);
+	    if (!defined($line)) {
+		my $s = $booted_timeout == 1 ? "" : "s";
+		doprint "Successful boot found: break after $booted_timeout second$s\n";
+		last;
+	    }
+	} else {
+	    $line = wait_for_input($monitor_fp);
+	    if (!defined($line)) {
+		my $s = $timeout == 1 ? "" : "s";
+		doprint "Timed out after $timeout second$s\n";
+		last;
+	    }
+	}
+
+	doprint $line;
+	print DMESG $line;
+
+	# we are not guaranteed to get a full line
+	$full_line .= $line;
+
+	if ($full_line =~ /$success_line/) {
+	    $booted = 1;
+	    $success_start = time;
+	}
+
+	if ($booted && defined($stop_after_success) &&
+	    $stop_after_success >= 0) {
+	    my $now = time;
+	    if ($now - $success_start >= $stop_after_success) {
+		doprint "Test forced to stop after $stop_after_success seconds after success\n";
+		last;
+	    }
+	}
+
+	if ($full_line =~ /\[ backtrace testing \]/) {
+	    $skip_call_trace = 1;
+	}
+
+	if ($full_line =~ /call trace:/i) {
+	    if (!$bug && !$skip_call_trace) {
+		if ($ignore_errors) {
+		    $bug_ignored = 1;
+		} else {
+		    $bug = 1;
+		    $failure_start = time;
+		}
+	    }
+	}
+
+	if ($bug && defined($stop_after_failure) &&
+	    $stop_after_failure >= 0) {
+	    my $now = time;
+	    if ($now - $failure_start >= $stop_after_failure) {
+		doprint "Test forced to stop after $stop_after_failure seconds after failure\n";
+		last;
+	    }
+	}
+
+	if ($full_line =~ /\[ end of backtrace testing \]/) {
+	    $skip_call_trace = 0;
+	}
+
+	if ($full_line =~ /Kernel panic -/) {
+	    $failure_start = time;
+	    $bug = 1;
+	}
+
+	# Detect triple faults by testing the banner
+	if ($full_line =~ /\bLinux version (\S+).*\n/) {
+	    if ($1 eq $version) {
+		$version_found = 1;
+	    } elsif ($version_found && $detect_triplefault) {
+		# We already booted into the kernel we are testing,
+		# but now we booted into another kernel?
+		# Consider this a triple fault.
+		doprint "Already booted in Linux kernel $version, but now\n";
+		doprint "we booted into Linux kernel $1.\n";
+		doprint "Assuming that this is a triple fault.\n";
+		doprint "To disable this: set DETECT_TRIPLE_FAULT to 0\n";
+		last;
+	    }
+	}
+
+	if ($line =~ /\n/) {
+	    $full_line = "";
+	}
+
+	if ($stop_test_after > 0 && !$booted && !$bug) {
+	    if (time - $monitor_start > $stop_test_after) {
+		doprint "STOP_TEST_AFTER ($stop_test_after seconds) timed out\n";
+		$done = 1;
+	    }
+	}
+    }
+
+    my $end_time = time;
+    $reboot_time = $end_time - $start_time;
+
+    close(DMESG);
+
+    if ($bug) {
+	return 0 if ($in_bisect);
+	fail "failed - got a bug report" and return 0;
+    }
+
+    if (!$booted) {
+	return 0 if ($in_bisect);
+	fail "failed - never got a boot prompt." and return 0;
+    }
+
+    if ($bug_ignored) {
+	doprint "WARNING: Call Trace detected but ignored due to IGNORE_ERRORS=1\n";
+    }
+
+    return 1;
+}
+
+sub eval_kernel_version {
+    my ($option) = @_;
+
+    $option =~ s/\$KERNEL_VERSION/$version/g;
+
+    return $option;
+}
+
+sub do_post_install {
+
+    return if (!defined($post_install));
+
+    my $cp_post_install = eval_kernel_version $post_install;
+    run_command "$cp_post_install" or
+	dodie "Failed to run post install";
+}
+
+# Sometimes the reboot fails, and will hang. We try to ssh to the box
+# and if we fail, we force another reboot, that should powercycle it.
+sub test_booted {
+    if (!run_ssh "echo testing connection") {
+	reboot $sleep_time;
+    }
+}
+
+sub install {
+
+    return if ($no_install);
+
+    my $start_time = time;
+
+    if (defined($pre_install)) {
+	my $cp_pre_install = eval_kernel_version $pre_install;
+	run_command "$cp_pre_install" or
+	    dodie "Failed to run pre install";
+    }
+
+    my $cp_target = eval_kernel_version $target_image;
+
+    test_booted;
+
+    run_scp_install "$outputdir/$build_target", "$cp_target" or
+	dodie "failed to copy image";
+
+    my $install_mods = 0;
+
+    # should we process modules?
+    $install_mods = 0;
+    open(IN, "$output_config") or dodie("Can't read config file");
+    while (<IN>) {
+	if (/CONFIG_MODULES(=y)?/) {
+	    if (defined($1)) {
+		$install_mods = 1;
+		last;
+	    }
+	}
+    }
+    close(IN);
+
+    if (!$install_mods) {
+	do_post_install;
+	doprint "No modules needed\n";
+	my $end_time = time;
+	$install_time = $end_time - $start_time;
+	return;
+    }
+
+    run_command "$make INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=$tmpdir modules_install" or
+	dodie "Failed to install modules";
+
+    my $modlib = "/lib/modules/$version";
+    my $modtar = "ktest-mods.tar.bz2";
+
+    run_ssh "rm -rf $modlib" or
+	dodie "failed to remove old mods: $modlib";
+
+    # would be nice if scp -r did not follow symbolic links
+    run_command "cd $tmpdir && tar -cjf $modtar lib/modules/$version" or
+	dodie "making tarball";
+
+    run_scp_mod "$tmpdir/$modtar", "/tmp" or
+	dodie "failed to copy modules";
+
+    unlink "$tmpdir/$modtar";
+
+    run_ssh "'(cd / && tar xjf /tmp/$modtar)'" or
+	dodie "failed to tar modules";
+
+    run_ssh "rm -f /tmp/$modtar";
+
+    do_post_install;
+
+    my $end_time = time;
+    $install_time = $end_time - $start_time;
+}
+
+sub get_version {
+    # get the release name
+    return if ($have_version);
+    doprint "$make kernelrelease ... ";
+    $version = `$make -s kernelrelease | tail -1`;
+    chomp($version);
+    doprint "$version\n";
+    $have_version = 1;
+}
+
+sub start_monitor_and_install {
+    # Make sure the stable kernel has finished booting
+
+    # Install bisects, don't need console
+    if (defined $console) {
+	start_monitor;
+	wait_for_monitor 5;
+	end_monitor;
+    }
+
+    get_grub_index;
+    get_version;
+    install;
+
+    start_monitor if (defined $console);
+    return monitor;
+}
+
+my $check_build_re = ".*:.*(warning|error|Error):.*";
+my $utf8_quote = "\\x{e2}\\x{80}(\\x{98}|\\x{99})";
+
+sub process_warning_line {
+    my ($line) = @_;
+
+    chomp $line;
+
+    # for distcc heterogeneous systems, some compilers
+    # do things differently causing warning lines
+    # to be slightly different. This makes an attempt
+    # to fixe those issues.
+
+    # chop off the index into the line
+    # using distcc, some compilers give different indexes
+    # depending on white space
+    $line =~ s/^(\s*\S+:\d+:)\d+/$1/;
+
+    # Some compilers use UTF-8 extended for quotes and some don't.
+    $line =~ s/$utf8_quote/'/g;
+
+    return $line;
+}
+
+# Read buildlog and check against warnings file for any
+# new warnings.
+#
+# Returns 1 if OK
+#         0 otherwise
+sub check_buildlog {
+    return 1 if (!defined $warnings_file);
+
+    my %warnings_list;
+
+    # Failed builds should not reboot the target
+    my $save_no_reboot = $no_reboot;
+    $no_reboot = 1;
+
+    if (-f $warnings_file) {
+	open(IN, $warnings_file) or
+	    dodie "Error opening $warnings_file";
+
+	while (<IN>) {
+	    if (/$check_build_re/) {
+		my $warning = process_warning_line $_;
+		
+		$warnings_list{$warning} = 1;
+	    }
+	}
+	close(IN);
+    }
+
+    # If warnings file didn't exist, and WARNINGS_FILE exist,
+    # then we fail on any warning!
+
+    open(IN, $buildlog) or dodie "Can't open $buildlog";
+    while (<IN>) {
+	if (/$check_build_re/) {
+	    my $warning = process_warning_line $_;
+
+	    if (!defined $warnings_list{$warning}) {
+		fail "New warning found (not in $warnings_file)\n$_\n";
+		$no_reboot = $save_no_reboot;
+		return 0;
+	    }
+	}
+    }
+    $no_reboot = $save_no_reboot;
+    close(IN);
+}
+
+sub check_patch_buildlog {
+    my ($patch) = @_;
+
+    my @files = `git show $patch | diffstat -l`;
+
+    foreach my $file (@files) {
+	chomp $file;
+    }
+
+    open(IN, "git show $patch |") or
+	dodie "failed to show $patch";
+    while (<IN>) {
+	if (m,^--- a/(.*),) {
+	    chomp $1;
+	    $files[$#files] = $1;
+	}
+    }
+    close(IN);
+
+    open(IN, $buildlog) or dodie "Can't open $buildlog";
+    while (<IN>) {
+	if (/^\s*(.*?):.*(warning|error)/) {
+	    my $err = $1;
+	    foreach my $file (@files) {
+		my $fullpath = "$builddir/$file";
+		if ($file eq $err || $fullpath eq $err) {
+		    fail "$file built with warnings" and return 0;
+		}
+	    }
+	}
+    }
+    close(IN);
+
+    return 1;
+}
+
+sub apply_min_config {
+    my $outconfig = "$output_config.new";
+
+    # Read the config file and remove anything that
+    # is in the force_config hash (from minconfig and others)
+    # then add the force config back.
+
+    doprint "Applying minimum configurations into $output_config.new\n";
+
+    open (OUT, ">$outconfig") or
+	dodie "Can't create $outconfig";
+
+    if (-f $output_config) {
+	open (IN, $output_config) or
+	    dodie "Failed to open $output_config";
+	while (<IN>) {
+	    if (/^(# )?(CONFIG_[^\s=]*)/) {
+		next if (defined($force_config{$2}));
+	    }
+	    print OUT;
+	}
+	close IN;
+    }
+    foreach my $config (keys %force_config) {
+	print OUT "$force_config{$config}\n";
+    }
+    close OUT;
+
+    run_command "mv $outconfig $output_config";
+}
+
+sub make_oldconfig {
+
+    my @force_list = keys %force_config;
+
+    if ($#force_list >= 0) {
+	apply_min_config;
+    }
+
+    if (!run_command "$make olddefconfig") {
+	# Perhaps olddefconfig doesn't exist in this version of the kernel
+	# try oldnoconfig
+	doprint "olddefconfig failed, trying make oldnoconfig\n";
+	if (!run_command "$make oldnoconfig") {
+	    doprint "oldnoconfig failed, trying yes '' | make oldconfig\n";
+	    # try a yes '' | oldconfig
+	    run_command "yes '' | $make oldconfig" or
+		dodie "failed make config oldconfig";
+	}
+    }
+}
+
+# read a config file and use this to force new configs.
+sub load_force_config {
+    my ($config) = @_;
+
+    doprint "Loading force configs from $config\n";
+    open(IN, $config) or
+	dodie "failed to read $config";
+    while (<IN>) {
+	chomp;
+	if (/^(CONFIG[^\s=]*)(\s*=.*)/) {
+	    $force_config{$1} = $_;
+	} elsif (/^# (CONFIG_\S*) is not set/) {
+	    $force_config{$1} = $_;
+	}
+    }
+    close IN;
+}
+
+sub build {
+    my ($type) = @_;
+
+    unlink $buildlog;
+
+    my $start_time = time;
+
+    # Failed builds should not reboot the target
+    my $save_no_reboot = $no_reboot;
+    $no_reboot = 1;
+
+    # Calculate a new version from here.
+    $have_version = 0;
+
+    if (defined($pre_build)) {
+	my $ret = run_command $pre_build;
+	if (!$ret && defined($pre_build_die) &&
+	    $pre_build_die) {
+	    dodie "failed to pre_build\n";
+	}
+    }
+
+    if ($type =~ /^useconfig:(.*)/) {
+	run_command "cp $1 $output_config" or
+	    dodie "could not copy $1 to .config";
+
+	$type = "oldconfig";
+    }
+
+    # old config can ask questions
+    if ($type eq "oldconfig") {
+	$type = "olddefconfig";
+
+	# allow for empty configs
+	run_command "touch $output_config";
+
+	if (!$noclean) {
+	    run_command "mv $output_config $outputdir/config_temp" or
+		dodie "moving .config";
+
+	    run_command "$make mrproper" or dodie "make mrproper";
+
+	    run_command "mv $outputdir/config_temp $output_config" or
+		dodie "moving config_temp";
+	}
+
+    } elsif (!$noclean) {
+	unlink "$output_config";
+	run_command "$make mrproper" or
+	    dodie "make mrproper";
+    }
+
+    # add something to distinguish this build
+    open(OUT, "> $outputdir/localversion") or dodie("Can't make localversion file");
+    print OUT "$localversion\n";
+    close(OUT);
+
+    if (defined($minconfig)) {
+	load_force_config($minconfig);
+    }
+
+    if ($type ne "olddefconfig") {
+	run_command "$make $type" or
+	    dodie "failed make config";
+    }
+    # Run old config regardless, to enforce min configurations
+    make_oldconfig;
+
+    my $build_ret = run_command "$make $build_options", $buildlog;
+
+    if (defined($post_build)) {
+	# Because a post build may change the kernel version
+	# do it now.
+	get_version;
+	my $ret = run_command $post_build;
+	if (!$ret && defined($post_build_die) &&
+	    $post_build_die) {
+	    dodie "failed to post_build\n";
+	}
+    }
+
+    if (!$build_ret) {
+	# bisect may need this to pass
+	if ($in_bisect) {
+	    $no_reboot = $save_no_reboot;
+	    return 0;
+	}
+	fail "failed build" and return 0;
+    }
+
+    $no_reboot = $save_no_reboot;
+
+    my $end_time = time;
+    $build_time = $end_time - $start_time;
+
+    return 1;
+}
+
+sub halt {
+    if (!run_ssh "halt" or defined($power_off)) {
+	if (defined($poweroff_after_halt)) {
+	    sleep $poweroff_after_halt;
+	    run_command "$power_off";
+	}
+    } else {
+	# nope? the zap it!
+	run_command "$power_off";
+    }
+}
+
+sub success {
+    my ($i) = @_;
+
+    $successes++;
+
+    my $name = "";
+
+    if (defined($test_name)) {
+	$name = " ($test_name)";
+    }
+
+    print_times;
+
+    doprint "\n\n*******************************************\n";
+    doprint     "*******************************************\n";
+    doprint     "KTEST RESULT: TEST $i$name SUCCESS!!!!         **\n";
+    doprint     "*******************************************\n";
+    doprint     "*******************************************\n";
+
+    if (defined($store_successes)) {
+        save_logs "success", $store_successes;
+    }
+
+    if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) {
+	doprint "Reboot and wait $sleep_time seconds\n";
+	reboot_to_good $sleep_time;
+    }
+
+    if (defined($post_test)) {
+	run_command $post_test;
+    }
+}
+
+sub answer_bisect {
+    for (;;) {
+	doprint "Pass, fail, or skip? [p/f/s]";
+	my $ans = <STDIN>;
+	chomp $ans;
+	if ($ans eq "p" || $ans eq "P") {
+	    return 1;
+	} elsif ($ans eq "f" || $ans eq "F") {
+	    return 0;
+	} elsif ($ans eq "s" || $ans eq "S") {
+	    return -1;
+	} else {
+	    print "Please answer 'p', 'f', or 's'\n";
+	}
+    }
+}
+
+sub child_run_test {
+
+    # child should have no power
+    $reboot_on_error = 0;
+    $poweroff_on_error = 0;
+    $die_on_failure = 1;
+
+    run_command $run_test, $testlog;
+
+    exit $run_command_status;
+}
+
+my $child_done;
+
+sub child_finished {
+    $child_done = 1;
+}
+
+sub do_run_test {
+    my $child_pid;
+    my $child_exit;
+    my $line;
+    my $full_line;
+    my $bug = 0;
+    my $bug_ignored = 0;
+
+    my $start_time = time;
+
+    wait_for_monitor 1;
+
+    doprint "run test $run_test\n";
+
+    $child_done = 0;
+
+    $SIG{CHLD} = qw(child_finished);
+
+    $child_pid = fork;
+
+    child_run_test if (!$child_pid);
+
+    $full_line = "";
+
+    do {
+	$line = wait_for_input($monitor_fp, 1);
+	if (defined($line)) {
+
+	    # we are not guaranteed to get a full line
+	    $full_line .= $line;
+	    doprint $line;
+
+	    if ($full_line =~ /call trace:/i) {
+		if ($ignore_errors) {
+		    $bug_ignored = 1;
+		} else {
+		    $bug = 1;
+		}
+	    }
+
+	    if ($full_line =~ /Kernel panic -/) {
+		$bug = 1;
+	    }
+
+	    if ($line =~ /\n/) {
+		$full_line = "";
+	    }
+	}
+    } while (!$child_done && !$bug);
+
+    if (!$bug && $bug_ignored) {
+	doprint "WARNING: Call Trace detected but ignored due to IGNORE_ERRORS=1\n";
+    }
+
+    if ($bug) {
+	my $failure_start = time;
+	my $now;
+	do {
+	    $line = wait_for_input($monitor_fp, 1);
+	    if (defined($line)) {
+		doprint $line;
+	    }
+	    $now = time;
+	    if ($now - $failure_start >= $stop_after_failure) {
+		last;
+	    }
+	} while (defined($line));
+
+	doprint "Detected kernel crash!\n";
+	# kill the child with extreme prejudice
+	kill 9, $child_pid;
+    }
+
+    waitpid $child_pid, 0;
+    $child_exit = $? >> 8;
+
+    my $end_time = time;
+    $test_time = $end_time - $start_time;
+
+    if (!$bug && $in_bisect) {
+	if (defined($bisect_ret_good)) {
+	    if ($child_exit == $bisect_ret_good) {
+		return 1;
+	    }
+	}
+	if (defined($bisect_ret_skip)) {
+	    if ($child_exit == $bisect_ret_skip) {
+		return -1;
+	    }
+	}
+	if (defined($bisect_ret_abort)) {
+	    if ($child_exit == $bisect_ret_abort) {
+		fail "test abort" and return -2;
+	    }
+	}
+	if (defined($bisect_ret_bad)) {
+	    if ($child_exit == $bisect_ret_skip) {
+		return 0;
+	    }
+	}
+	if (defined($bisect_ret_default)) {
+	    if ($bisect_ret_default eq "good") {
+		return 1;
+	    } elsif ($bisect_ret_default eq "bad") {
+		return 0;
+	    } elsif ($bisect_ret_default eq "skip") {
+		return -1;
+	    } elsif ($bisect_ret_default eq "abort") {
+		return -2;
+	    } else {
+		fail "unknown default action: $bisect_ret_default"
+		    and return -2;
+	    }
+	}
+    }
+
+    if ($bug || $child_exit) {
+	return 0 if $in_bisect;
+	fail "test failed" and return 0;
+    }
+    return 1;
+}
+
+sub run_git_bisect {
+    my ($command) = @_;
+
+    doprint "$command ... ";
+
+    my $output = `$command 2>&1`;
+    my $ret = $?;
+
+    logit $output;
+
+    if ($ret) {
+	doprint "FAILED\n";
+	dodie "Failed to git bisect";
+    }
+
+    doprint "SUCCESS\n";
+    if ($output =~ m/^(Bisecting: .*\(roughly \d+ steps?\))\s+\[([[:xdigit:]]+)\]/) {
+	doprint "$1 [$2]\n";
+    } elsif ($output =~ m/^([[:xdigit:]]+) is the first bad commit/) {
+	$bisect_bad_commit = $1;
+	doprint "Found bad commit... $1\n";
+	return 0;
+    } else {
+	# we already logged it, just print it now.
+	print $output;
+    }
+
+    return 1;
+}
+
+sub bisect_reboot {
+    doprint "Reboot and sleep $bisect_sleep_time seconds\n";
+    reboot_to_good $bisect_sleep_time;
+}
+
+# returns 1 on success, 0 on failure, -1 on skip
+sub run_bisect_test {
+    my ($type, $buildtype) = @_;
+
+    my $failed = 0;
+    my $result;
+    my $output;
+    my $ret;
+
+    $in_bisect = 1;
+
+    build $buildtype or $failed = 1;
+
+    if ($type ne "build") {
+	if ($failed && $bisect_skip) {
+	    $in_bisect = 0;
+	    return -1;
+	}
+	dodie "Failed on build" if $failed;
+
+	# Now boot the box
+	start_monitor_and_install or $failed = 1;
+
+	if ($type ne "boot") {
+	    if ($failed && $bisect_skip) {
+		end_monitor;
+		bisect_reboot;
+		$in_bisect = 0;
+		return -1;
+	    }
+	    dodie "Failed on boot" if $failed;
+
+	    do_run_test or $failed = 1;
+	}
+	end_monitor;
+    }
+
+    if ($failed) {
+	$result = 0;
+    } else {
+	$result = 1;
+    }
+
+    # reboot the box to a kernel we can ssh to
+    if ($type ne "build") {
+	bisect_reboot;
+    }
+    $in_bisect = 0;
+
+    return $result;
+}
+
+sub run_bisect {
+    my ($type) = @_;
+    my $buildtype = "oldconfig";
+
+    # We should have a minconfig to use?
+    if (defined($minconfig)) {
+	$buildtype = "useconfig:$minconfig";
+    }
+
+    # If the user sets bisect_tries to less than 1, then no tries
+    # is a success.
+    my $ret = 1;
+
+    # Still let the user manually decide that though.
+    if ($bisect_tries < 1 && $bisect_manual) {
+	$ret = answer_bisect;
+    }
+
+    for (my $i = 0; $i < $bisect_tries; $i++) {
+	if ($bisect_tries > 1) {
+	    my $t = $i + 1;
+	    doprint("Running bisect trial $t of $bisect_tries:\n");
+	}
+	$ret = run_bisect_test $type, $buildtype;
+
+	if ($bisect_manual) {
+	    $ret = answer_bisect;
+	}
+
+	last if (!$ret);
+    }
+
+    # Are we looking for where it worked, not failed?
+    if ($reverse_bisect && $ret >= 0) {
+	$ret = !$ret;
+    }
+
+    if ($ret > 0) {
+	return "good";
+    } elsif ($ret == 0) {
+	return  "bad";
+    } elsif ($bisect_skip) {
+	doprint "HIT A BAD COMMIT ... SKIPPING\n";
+	return "skip";
+    }
+}
+
+sub update_bisect_replay {
+    my $tmp_log = "$tmpdir/ktest_bisect_log";
+    run_command "git bisect log > $tmp_log" or
+	dodie "can't create bisect log";
+    return $tmp_log;
+}
+
+sub bisect {
+    my ($i) = @_;
+
+    my $result;
+
+    dodie "BISECT_GOOD[$i] not defined\n"	if (!defined($bisect_good));
+    dodie "BISECT_BAD[$i] not defined\n"	if (!defined($bisect_bad));
+    dodie "BISECT_TYPE[$i] not defined\n"	if (!defined($bisect_type));
+
+    my $good = $bisect_good;
+    my $bad = $bisect_bad;
+    my $type = $bisect_type;
+    my $start = $bisect_start;
+    my $replay = $bisect_replay;
+    my $start_files = $bisect_files;
+
+    if (defined($start_files)) {
+	$start_files = " -- " . $start_files;
+    } else {
+	$start_files = "";
+    }
+
+    # convert to true sha1's
+    $good = get_sha1($good);
+    $bad = get_sha1($bad);
+
+    if (defined($bisect_reverse) && $bisect_reverse == 1) {
+	doprint "Performing a reverse bisect (bad is good, good is bad!)\n";
+	$reverse_bisect = 1;
+    } else {
+	$reverse_bisect = 0;
+    }
+
+    # Can't have a test without having a test to run
+    if ($type eq "test" && !defined($run_test)) {
+	$type = "boot";
+    }
+
+    # Check if a bisect was running
+    my $bisect_start_file = "$builddir/.git/BISECT_START";
+
+    my $check = $bisect_check;
+    my $do_check = defined($check) && $check ne "0";
+
+    if ( -f $bisect_start_file ) {
+	print "Bisect in progress found\n";
+	if ($do_check) {
+	    print " If you say yes, then no checks of good or bad will be done\n";
+	}
+	if (defined($replay)) {
+	    print "** BISECT_REPLAY is defined in config file **";
+	    print " Ignore config option and perform new git bisect log?\n";
+	    if (read_ync " (yes, no, or cancel) ") {
+		$replay = update_bisect_replay;
+		$do_check = 0;
+	    }
+	} elsif (read_yn "read git log and continue?") {
+	    $replay = update_bisect_replay;
+	    $do_check = 0;
+	}
+    }
+
+    if ($do_check) {
+
+	# get current HEAD
+	my $head = get_sha1("HEAD");
+
+	if ($check ne "good") {
+	    doprint "TESTING BISECT BAD [$bad]\n";
+	    run_command "git checkout $bad" or
+		dodie "Failed to checkout $bad";
+
+	    $result = run_bisect $type;
+
+	    if ($result ne "bad") {
+		fail "Tested BISECT_BAD [$bad] and it succeeded" and return 0;
+	    }
+	}
+
+	if ($check ne "bad") {
+	    doprint "TESTING BISECT GOOD [$good]\n";
+	    run_command "git checkout $good" or
+		dodie "Failed to checkout $good";
+
+	    $result = run_bisect $type;
+
+	    if ($result ne "good") {
+		fail "Tested BISECT_GOOD [$good] and it failed" and return 0;
+	    }
+	}
+
+	# checkout where we started
+	run_command "git checkout $head" or
+	    dodie "Failed to checkout $head";
+    }
+
+    run_command "git bisect start$start_files" or
+	dodie "could not start bisect";
+
+    if (defined($replay)) {
+	run_command "git bisect replay $replay" or
+	    dodie "failed to run replay";
+    } else {
+
+	run_command "git bisect good $good" or
+	    dodie "could not set bisect good to $good";
+
+	run_git_bisect "git bisect bad $bad" or
+	    dodie "could not set bisect bad to $bad";
+
+    }
+
+    if (defined($start)) {
+	run_command "git checkout $start" or
+	    dodie "failed to checkout $start";
+    }
+
+    my $test;
+    do {
+	$result = run_bisect $type;
+	$test = run_git_bisect "git bisect $result";
+	print_times;
+    } while ($test);
+
+    run_command "git bisect log" or
+	dodie "could not capture git bisect log";
+
+    run_command "git bisect reset" or
+	dodie "could not reset git bisect";
+
+    doprint "Bad commit was [$bisect_bad_commit]\n";
+
+    success $i;
+}
+
+# config_ignore holds the configs that were set (or unset) for
+# a good config and we will ignore these configs for the rest
+# of a config bisect. These configs stay as they were.
+my %config_ignore;
+
+# config_set holds what all configs were set as.
+my %config_set;
+
+# config_off holds the set of configs that the bad config had disabled.
+# We need to record them and set them in the .config when running
+# olddefconfig, because olddefconfig keeps the defaults.
+my %config_off;
+
+# config_off_tmp holds a set of configs to turn off for now
+my @config_off_tmp;
+
+# config_list is the set of configs that are being tested
+my %config_list;
+my %null_config;
+
+my %dependency;
+
+sub assign_configs {
+    my ($hash, $config) = @_;
+
+    doprint "Reading configs from $config\n";
+
+    open (IN, $config)
+	or dodie "Failed to read $config";
+
+    while (<IN>) {
+	chomp;
+	if (/^((CONFIG\S*)=.*)/) {
+	    ${$hash}{$2} = $1;
+	} elsif (/^(# (CONFIG\S*) is not set)/) {
+	    ${$hash}{$2} = $1;
+	}
+    }
+
+    close(IN);
+}
+
+sub process_config_ignore {
+    my ($config) = @_;
+
+    assign_configs \%config_ignore, $config;
+}
+
+sub get_dependencies {
+    my ($config) = @_;
+
+    my $arr = $dependency{$config};
+    if (!defined($arr)) {
+	return ();
+    }
+
+    my @deps = @{$arr};
+
+    foreach my $dep (@{$arr}) {
+	print "ADD DEP $dep\n";
+	@deps = (@deps, get_dependencies $dep);
+    }
+
+    return @deps;
+}
+
+sub save_config {
+    my ($pc, $file) = @_;
+
+    my %configs = %{$pc};
+
+    doprint "Saving configs into $file\n";
+
+    open(OUT, ">$file") or dodie "Can not write to $file";
+
+    foreach my $config (keys %configs) {
+	print OUT "$configs{$config}\n";
+    }
+    close(OUT);
+}
+
+sub create_config {
+    my ($name, $pc) = @_;
+
+    doprint "Creating old config from $name configs\n";
+
+    save_config $pc, $output_config;
+
+    make_oldconfig;
+}
+
+sub run_config_bisect_test {
+    my ($type) = @_;
+
+    my $ret = run_bisect_test $type, "oldconfig";
+
+    if ($bisect_manual) {
+	$ret = answer_bisect;
+    }
+
+    return $ret;
+}
+
+sub config_bisect_end {
+    my ($good, $bad) = @_;
+    my $diffexec = "diff -u";
+
+    if (-f "$builddir/scripts/diffconfig") {
+	$diffexec = "$builddir/scripts/diffconfig";
+    }
+    doprint "\n\n***************************************\n";
+    doprint "No more config bisecting possible.\n";
+    run_command "$diffexec $good $bad", 1;
+    doprint "***************************************\n\n";
+}
+
+sub run_config_bisect {
+    my ($good, $bad, $last_result) = @_;
+    my $reset = "";
+    my $cmd;
+    my $ret;
+
+    if (!length($last_result)) {
+	$reset = "-r";
+    }
+    run_command "$config_bisect_exec $reset -b $outputdir $good $bad $last_result", 1;
+
+    # config-bisect returns:
+    #   0 if there is more to bisect
+    #   1 for finding a good config
+    #   2 if it can not find any more configs
+    #  -1 (255) on error
+    if ($run_command_status) {
+	return $run_command_status;
+    }
+
+    $ret = run_config_bisect_test $config_bisect_type;
+    if ($ret) {
+        doprint "NEW GOOD CONFIG\n";
+	# Return 3 for good config
+	return 3;
+    } else {
+        doprint "NEW BAD CONFIG\n";
+	# Return 4 for bad config
+	return 4;
+    }
+}
+
+sub config_bisect {
+    my ($i) = @_;
+
+    my $good_config;
+    my $bad_config;
+
+    my $type = $config_bisect_type;
+    my $ret;
+
+    $bad_config = $config_bisect;
+
+    if (defined($config_bisect_good)) {
+	$good_config = $config_bisect_good;
+    } elsif (defined($minconfig)) {
+	$good_config = $minconfig;
+    } else {
+	doprint "No config specified, checking if defconfig works";
+	$ret = run_bisect_test $type, "defconfig";
+	if (!$ret) {
+	    fail "Have no good config to compare with, please set CONFIG_BISECT_GOOD";
+	    return 1;
+	}
+	$good_config = $output_config;
+    }
+
+    if (!defined($config_bisect_exec)) {
+	# First check the location that ktest.pl ran
+	my @locations = ( "$pwd/config-bisect.pl",
+			  "$dirname/config-bisect.pl",
+			  "$builddir/tools/testing/ktest/config-bisect.pl",
+			  undef );
+	foreach my $loc (@locations) {
+	    doprint "loc = $loc\n";
+	    $config_bisect_exec = $loc;
+	    last if (defined($config_bisect_exec && -x $config_bisect_exec));
+	}
+	if (!defined($config_bisect_exec)) {
+	    fail "Could not find an executable config-bisect.pl\n",
+		"  Set CONFIG_BISECT_EXEC to point to config-bisect.pl";
+	    return 1;
+	}
+    }
+
+    # we don't want min configs to cause issues here.
+    doprint "Disabling 'MIN_CONFIG' for this test\n";
+    undef $minconfig;
+
+    my %good_configs;
+    my %bad_configs;
+    my %tmp_configs;
+
+    if (-f "$tmpdir/good_config.tmp" || -f "$tmpdir/bad_config.tmp") {
+	if (read_yn "Interrupted config-bisect. Continue (n - will start new)?") {
+	    if (-f "$tmpdir/good_config.tmp") {
+		$good_config = "$tmpdir/good_config.tmp";
+	    } else {
+		$good_config = "$tmpdir/good_config";
+	    }
+	    if (-f "$tmpdir/bad_config.tmp") {
+		$bad_config = "$tmpdir/bad_config.tmp";
+	    } else {
+		$bad_config = "$tmpdir/bad_config";
+	    }
+	}
+    }
+    doprint "Run good configs through make oldconfig\n";
+    assign_configs \%tmp_configs, $good_config;
+    create_config "$good_config", \%tmp_configs;
+    $good_config = "$tmpdir/good_config";
+    system("cp $output_config $good_config") == 0 or dodie "cp good config";
+
+    doprint "Run bad configs through make oldconfig\n";
+    assign_configs \%tmp_configs, $bad_config;
+    create_config "$bad_config", \%tmp_configs;
+    $bad_config = "$tmpdir/bad_config";
+    system("cp $output_config $bad_config") == 0 or dodie "cp bad config";
+
+    if (defined($config_bisect_check) && $config_bisect_check ne "0") {
+	if ($config_bisect_check ne "good") {
+	    doprint "Testing bad config\n";
+
+	    $ret = run_bisect_test $type, "useconfig:$bad_config";
+	    if ($ret) {
+		fail "Bad config succeeded when expected to fail!";
+		return 0;
+	    }
+	}
+	if ($config_bisect_check ne "bad") {
+	    doprint "Testing good config\n";
+
+	    $ret = run_bisect_test $type, "useconfig:$good_config";
+	    if (!$ret) {
+		fail "Good config failed when expected to succeed!";
+		return 0;
+	    }
+	}
+    }
+
+    my $last_run = "";
+
+    do {
+	$ret = run_config_bisect $good_config, $bad_config, $last_run;
+	if ($ret == 3) {
+	    $last_run = "good";
+	} elsif ($ret == 4) {
+	    $last_run = "bad";
+	}
+	print_times;
+    } while ($ret == 3 || $ret == 4);
+
+    if ($ret == 2) {
+        config_bisect_end "$good_config.tmp", "$bad_config.tmp";
+    }
+
+    return $ret if ($ret < 0);
+
+    success $i;
+}
+
+sub patchcheck_reboot {
+    doprint "Reboot and sleep $patchcheck_sleep_time seconds\n";
+    reboot_to_good $patchcheck_sleep_time;
+}
+
+sub patchcheck {
+    my ($i) = @_;
+
+    dodie "PATCHCHECK_START[$i] not defined\n"
+	if (!defined($patchcheck_start));
+    dodie "PATCHCHECK_TYPE[$i] not defined\n"
+	if (!defined($patchcheck_type));
+
+    my $start = $patchcheck_start;
+
+    my $cherry = $patchcheck_cherry;
+    if (!defined($cherry)) {
+	$cherry = 0;
+    }
+
+    my $end = "HEAD";
+    if (defined($patchcheck_end)) {
+	$end = $patchcheck_end;
+    } elsif ($cherry) {
+	dodie "PATCHCHECK_END must be defined with PATCHCHECK_CHERRY\n";
+    }
+
+    # Get the true sha1's since we can use things like HEAD~3
+    $start = get_sha1($start);
+    $end = get_sha1($end);
+
+    my $type = $patchcheck_type;
+
+    # Can't have a test without having a test to run
+    if ($type eq "test" && !defined($run_test)) {
+	$type = "boot";
+    }
+
+    if ($cherry) {
+	open (IN, "git cherry -v $start $end|") or
+	    dodie "could not get git list";
+    } else {
+	open (IN, "git log --pretty=oneline $end|") or
+	    dodie "could not get git list";
+    }
+
+    my @list;
+
+    while (<IN>) {
+	chomp;
+	# git cherry adds a '+' we want to remove
+	s/^\+ //;
+	$list[$#list+1] = $_;
+	last if (/^$start/);
+    }
+    close(IN);
+
+    if (!$cherry) {
+	if ($list[$#list] !~ /^$start/) {
+	    fail "SHA1 $start not found";
+	}
+
+	# go backwards in the list
+	@list = reverse @list;
+    }
+
+    doprint("Going to test the following commits:\n");
+    foreach my $l (@list) {
+	doprint "$l\n";
+    }
+
+    my $save_clean = $noclean;
+    my %ignored_warnings;
+
+    if (defined($ignore_warnings)) {
+	foreach my $sha1 (split /\s+/, $ignore_warnings) {
+	    $ignored_warnings{$sha1} = 1;
+	}
+    }
+
+    $in_patchcheck = 1;
+    foreach my $item (@list) {
+	my $sha1 = $item;
+	$sha1 =~ s/^([[:xdigit:]]+).*/$1/;
+
+	doprint "\nProcessing commit \"$item\"\n\n";
+
+	run_command "git checkout $sha1" or
+	    dodie "Failed to checkout $sha1";
+
+	# only clean on the first and last patch
+	if ($item eq $list[0] ||
+	    $item eq $list[$#list]) {
+	    $noclean = $save_clean;
+	} else {
+	    $noclean = 1;
+	}
+
+	if (defined($minconfig)) {
+	    build "useconfig:$minconfig" or return 0;
+	} else {
+	    # ?? no config to use?
+	    build "oldconfig" or return 0;
+	}
+
+	# No need to do per patch checking if warnings file exists
+	if (!defined($warnings_file) && !defined($ignored_warnings{$sha1})) {
+	    check_patch_buildlog $sha1 or return 0;
+	}
+
+	check_buildlog or return 0;
+
+	next if ($type eq "build");
+
+	my $failed = 0;
+
+	start_monitor_and_install or $failed = 1;
+
+	if (!$failed && $type ne "boot"){
+	    do_run_test or $failed = 1;
+	}
+	end_monitor;
+	if ($failed) {
+	    print_times;
+	    return 0;
+	}
+	patchcheck_reboot;
+	print_times;
+    }
+    $in_patchcheck = 0;
+    success $i;
+
+    return 1;
+}
+
+my %depends;
+my %depcount;
+my $iflevel = 0;
+my @ifdeps;
+
+# prevent recursion
+my %read_kconfigs;
+
+sub add_dep {
+    # $config depends on $dep
+    my ($config, $dep) = @_;
+
+    if (defined($depends{$config})) {
+	$depends{$config} .= " " . $dep;
+    } else {
+	$depends{$config} = $dep;
+    }
+
+    # record the number of configs depending on $dep
+    if (defined $depcount{$dep}) {
+	$depcount{$dep}++;
+    } else {
+	$depcount{$dep} = 1;
+    } 
+}
+
+# taken from streamline_config.pl
+sub read_kconfig {
+    my ($kconfig) = @_;
+
+    my $state = "NONE";
+    my $config;
+    my @kconfigs;
+
+    my $cont = 0;
+    my $line;
+
+
+    if (! -f $kconfig) {
+	doprint "file $kconfig does not exist, skipping\n";
+	return;
+    }
+
+    open(KIN, "$kconfig")
+	or dodie "Can't open $kconfig";
+    while (<KIN>) {
+	chomp;
+
+	# Make sure that lines ending with \ continue
+	if ($cont) {
+	    $_ = $line . " " . $_;
+	}
+
+	if (s/\\$//) {
+	    $cont = 1;
+	    $line = $_;
+	    next;
+	}
+
+	$cont = 0;
+
+	# collect any Kconfig sources
+	if (/^source\s*"(.*)"/) {
+	    $kconfigs[$#kconfigs+1] = $1;
+	}
+
+	# configs found
+	if (/^\s*(menu)?config\s+(\S+)\s*$/) {
+	    $state = "NEW";
+	    $config = $2;
+
+	    for (my $i = 0; $i < $iflevel; $i++) {
+		add_dep $config, $ifdeps[$i];
+	    }
+
+	# collect the depends for the config
+	} elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
+
+	    add_dep $config, $1;
+
+	# Get the configs that select this config
+	} elsif ($state eq "NEW" && /^\s*select\s+(\S+)/) {
+
+	    # selected by depends on config
+	    add_dep $1, $config;
+
+	# Check for if statements
+	} elsif (/^if\s+(.*\S)\s*$/) {
+	    my $deps = $1;
+	    # remove beginning and ending non text
+	    $deps =~ s/^[^a-zA-Z0-9_]*//;
+	    $deps =~ s/[^a-zA-Z0-9_]*$//;
+
+	    my @deps = split /[^a-zA-Z0-9_]+/, $deps;
+
+	    $ifdeps[$iflevel++] = join ':', @deps;
+
+	} elsif (/^endif/) {
+
+	    $iflevel-- if ($iflevel);
+
+	# stop on "help"
+	} elsif (/^\s*help\s*$/) {
+	    $state = "NONE";
+	}
+    }
+    close(KIN);
+
+    # read in any configs that were found.
+    foreach $kconfig (@kconfigs) {
+	if (!defined($read_kconfigs{$kconfig})) {
+	    $read_kconfigs{$kconfig} = 1;
+	    read_kconfig("$builddir/$kconfig");
+	}
+    }
+}
+
+sub read_depends {
+    # find out which arch this is by the kconfig file
+    open (IN, $output_config)
+	or dodie "Failed to read $output_config";
+    my $arch;
+    while (<IN>) {
+	if (m,Linux/(\S+)\s+\S+\s+Kernel Configuration,) {
+	    $arch = $1;
+	    last;
+	}
+    }
+    close IN;
+
+    if (!defined($arch)) {
+	doprint "Could not find arch from config file\n";
+	doprint "no dependencies used\n";
+	return;
+    }
+
+    # arch is really the subarch, we need to know
+    # what directory to look at.
+    if ($arch eq "i386" || $arch eq "x86_64") {
+	$arch = "x86";
+    }
+
+    my $kconfig = "$builddir/arch/$arch/Kconfig";
+
+    if (! -f $kconfig && $arch =~ /\d$/) {
+	my $orig = $arch;
+ 	# some subarchs have numbers, truncate them
+	$arch =~ s/\d*$//;
+	$kconfig = "$builddir/arch/$arch/Kconfig";
+	if (! -f $kconfig) {
+	    doprint "No idea what arch dir $orig is for\n";
+	    doprint "no dependencies used\n";
+	    return;
+	}
+    }
+
+    read_kconfig($kconfig);
+}
+
+sub make_new_config {
+    my @configs = @_;
+
+    open (OUT, ">$output_config")
+	or dodie "Failed to write $output_config";
+
+    foreach my $config (@configs) {
+	print OUT "$config\n";
+    }
+    close OUT;
+}
+
+sub chomp_config {
+    my ($config) = @_;
+
+    $config =~ s/CONFIG_//;
+
+    return $config;
+}
+
+sub get_depends {
+    my ($dep) = @_;
+
+    my $kconfig = chomp_config $dep;
+
+    $dep = $depends{"$kconfig"};
+
+    # the dep string we have saves the dependencies as they
+    # were found, including expressions like ! && ||. We
+    # want to split this out into just an array of configs.
+
+    my $valid = "A-Za-z_0-9";
+
+    my @configs;
+
+    while ($dep =~ /[$valid]/) {
+
+	if ($dep =~ /^[^$valid]*([$valid]+)/) {
+	    my $conf = "CONFIG_" . $1;
+
+	    $configs[$#configs + 1] = $conf;
+
+	    $dep =~ s/^[^$valid]*[$valid]+//;
+	} else {
+	    dodie "this should never happen";
+	}
+    }
+
+    return @configs;
+}
+
+my %min_configs;
+my %keep_configs;
+my %save_configs;
+my %processed_configs;
+my %nochange_config;
+
+sub test_this_config {
+    my ($config) = @_;
+
+    my $found;
+
+    # if we already processed this config, skip it
+    if (defined($processed_configs{$config})) {
+	return undef;
+    }
+    $processed_configs{$config} = 1;
+
+    # if this config failed during this round, skip it
+    if (defined($nochange_config{$config})) {
+	return undef;
+    }
+
+    my $kconfig = chomp_config $config;
+
+    # Test dependencies first
+    if (defined($depends{"$kconfig"})) {
+	my @parents = get_depends $config;
+	foreach my $parent (@parents) {
+	    # if the parent is in the min config, check it first
+	    next if (!defined($min_configs{$parent}));
+	    $found = test_this_config($parent);
+	    if (defined($found)) {
+		return $found;
+	    }
+	}
+    }
+
+    # Remove this config from the list of configs
+    # do a make olddefconfig and then read the resulting
+    # .config to make sure it is missing the config that
+    # we had before
+    my %configs = %min_configs;
+    delete $configs{$config};
+    make_new_config ((values %configs), (values %keep_configs));
+    make_oldconfig;
+    undef %configs;
+    assign_configs \%configs, $output_config;
+
+    if (!defined($configs{$config}) || $configs{$config} =~ /^#/) {
+	return $config;
+    }
+
+    doprint "disabling config $config did not change .config\n";
+
+    $nochange_config{$config} = 1;
+
+    return undef;
+}
+
+sub make_min_config {
+    my ($i) = @_;
+
+    my $type = $minconfig_type;
+    if ($type ne "boot" && $type ne "test") {
+	fail "Invalid MIN_CONFIG_TYPE '$minconfig_type'\n" .
+	    " make_min_config works only with 'boot' and 'test'\n" and return;
+    }
+
+    if (!defined($output_minconfig)) {
+	fail "OUTPUT_MIN_CONFIG not defined" and return;
+    }
+
+    # If output_minconfig exists, and the start_minconfig
+    # came from min_config, than ask if we should use
+    # that instead.
+    if (-f $output_minconfig && !$start_minconfig_defined) {
+	print "$output_minconfig exists\n";
+	if (!defined($use_output_minconfig)) {
+	    if (read_yn " Use it as minconfig?") {
+		$start_minconfig = $output_minconfig;
+	    }
+	} elsif ($use_output_minconfig > 0) {
+	    doprint "Using $output_minconfig as MIN_CONFIG\n";
+	    $start_minconfig = $output_minconfig;
+	} else {
+	    doprint "Set to still use MIN_CONFIG as starting point\n";
+	}
+    }
+
+    if (!defined($start_minconfig)) {
+	fail "START_MIN_CONFIG or MIN_CONFIG not defined" and return;
+    }
+
+    my $temp_config = "$tmpdir/temp_config";
+
+    # First things first. We build an allnoconfig to find
+    # out what the defaults are that we can't touch.
+    # Some are selections, but we really can't handle selections.
+
+    my $save_minconfig = $minconfig;
+    undef $minconfig;
+
+    run_command "$make allnoconfig" or return 0;
+
+    read_depends;
+
+    process_config_ignore $output_config;
+
+    undef %save_configs;
+    undef %min_configs;
+
+    if (defined($ignore_config)) {
+	# make sure the file exists
+	`touch $ignore_config`;
+	assign_configs \%save_configs, $ignore_config;
+    }
+
+    %keep_configs = %save_configs;
+
+    doprint "Load initial configs from $start_minconfig\n";
+
+    # Look at the current min configs, and save off all the
+    # ones that were set via the allnoconfig
+    assign_configs \%min_configs, $start_minconfig;
+
+    my @config_keys = keys %min_configs;
+
+    # All configs need a depcount
+    foreach my $config (@config_keys) {
+	my $kconfig = chomp_config $config;
+	if (!defined $depcount{$kconfig}) {
+		$depcount{$kconfig} = 0;
+	}
+    }
+
+    # Remove anything that was set by the make allnoconfig
+    # we shouldn't need them as they get set for us anyway.
+    foreach my $config (@config_keys) {
+	# Remove anything in the ignore_config
+	if (defined($keep_configs{$config})) {
+	    my $file = $ignore_config;
+	    $file =~ s,.*/(.*?)$,$1,;
+	    doprint "$config set by $file ... ignored\n";
+	    delete $min_configs{$config};
+	    next;
+	}
+	# But make sure the settings are the same. If a min config
+	# sets a selection, we do not want to get rid of it if
+	# it is not the same as what we have. Just move it into
+	# the keep configs.
+	if (defined($config_ignore{$config})) {
+	    if ($config_ignore{$config} ne $min_configs{$config}) {
+		doprint "$config is in allnoconfig as '$config_ignore{$config}'";
+		doprint " but it is '$min_configs{$config}' in minconfig .. keeping\n";
+		$keep_configs{$config} = $min_configs{$config};
+	    } else {
+		doprint "$config set by allnoconfig ... ignored\n";
+	    }
+	    delete $min_configs{$config};
+	}
+    }
+
+    my $done = 0;
+    my $take_two = 0;
+
+    while (!$done) {
+
+	my $config;
+	my $found;
+
+	# Now disable each config one by one and do a make oldconfig
+	# till we find a config that changes our list.
+
+	my @test_configs = keys %min_configs;
+
+	# Sort keys by who is most dependent on
+	@test_configs = sort  { $depcount{chomp_config($b)} <=> $depcount{chomp_config($a)} }
+			  @test_configs ;
+
+	# Put configs that did not modify the config at the end.
+	my $reset = 1;
+	for (my $i = 0; $i < $#test_configs; $i++) {
+	    if (!defined($nochange_config{$test_configs[0]})) {
+		$reset = 0;
+		last;
+	    }
+	    # This config didn't change the .config last time.
+	    # Place it at the end
+	    my $config = shift @test_configs;
+	    push @test_configs, $config;
+	}
+
+	# if every test config has failed to modify the .config file
+	# in the past, then reset and start over.
+	if ($reset) {
+	    undef %nochange_config;
+	}
+
+	undef %processed_configs;
+
+	foreach my $config (@test_configs) {
+
+	    $found = test_this_config $config;
+
+	    last if (defined($found));
+
+	    # oh well, try another config
+	}
+
+	if (!defined($found)) {
+	    # we could have failed due to the nochange_config hash
+	    # reset and try again
+	    if (!$take_two) {
+		undef %nochange_config;
+		$take_two = 1;
+		next;
+	    }
+	    doprint "No more configs found that we can disable\n";
+	    $done = 1;
+	    last;
+	}
+	$take_two = 0;
+
+	$config = $found;
+
+	doprint "Test with $config disabled\n";
+
+	# set in_bisect to keep build and monitor from dieing
+	$in_bisect = 1;
+
+	my $failed = 0;
+	build "oldconfig" or $failed = 1;
+	if (!$failed) {
+		start_monitor_and_install or $failed = 1;
+
+		if ($type eq "test" && !$failed) {
+		    do_run_test or $failed = 1;
+		}
+
+		end_monitor;
+	}
+
+	$in_bisect = 0;
+
+	if ($failed) {
+	    doprint "$min_configs{$config} is needed to boot the box... keeping\n";
+	    # this config is needed, add it to the ignore list.
+	    $keep_configs{$config} = $min_configs{$config};
+	    $save_configs{$config} = $min_configs{$config};
+	    delete $min_configs{$config};
+
+	    # update new ignore configs
+	    if (defined($ignore_config)) {
+		open (OUT, ">$temp_config")
+		    or dodie "Can't write to $temp_config";
+		foreach my $config (keys %save_configs) {
+		    print OUT "$save_configs{$config}\n";
+		}
+		close OUT;
+		run_command "mv $temp_config $ignore_config" or
+		    dodie "failed to copy update to $ignore_config";
+	    }
+
+	} else {
+	    # We booted without this config, remove it from the minconfigs.
+	    doprint "$config is not needed, disabling\n";
+
+	    delete $min_configs{$config};
+
+	    # Also disable anything that is not enabled in this config
+	    my %configs;
+	    assign_configs \%configs, $output_config;
+	    my @config_keys = keys %min_configs;
+	    foreach my $config (@config_keys) {
+		if (!defined($configs{$config})) {
+		    doprint "$config is not set, disabling\n";
+		    delete $min_configs{$config};
+		}
+	    }
+
+	    # Save off all the current mandatory configs
+	    open (OUT, ">$temp_config")
+		or dodie "Can't write to $temp_config";
+	    foreach my $config (keys %keep_configs) {
+		print OUT "$keep_configs{$config}\n";
+	    }
+	    foreach my $config (keys %min_configs) {
+		print OUT "$min_configs{$config}\n";
+	    }
+	    close OUT;
+
+	    run_command "mv $temp_config $output_minconfig" or
+		dodie "failed to copy update to $output_minconfig";
+	}
+
+	doprint "Reboot and wait $sleep_time seconds\n";
+	reboot_to_good $sleep_time;
+    }
+
+    success $i;
+    return 1;
+}
+
+sub make_warnings_file {
+    my ($i) = @_;
+
+    if (!defined($warnings_file)) {
+	dodie "Must define WARNINGS_FILE for make_warnings_file test";
+    }
+
+    if ($build_type eq "nobuild") {
+	dodie "BUILD_TYPE can not be 'nobuild' for make_warnings_file test";
+    }
+
+    build $build_type or dodie "Failed to build";
+
+    open(OUT, ">$warnings_file") or dodie "Can't create $warnings_file";
+
+    open(IN, $buildlog) or dodie "Can't open $buildlog";
+    while (<IN>) {
+
+	# Some compilers use UTF-8 extended for quotes
+	# for distcc heterogeneous systems, this causes issues
+	s/$utf8_quote/'/g;
+
+	if (/$check_build_re/) {
+	    print OUT;
+	}
+    }
+    close(IN);
+
+    close(OUT);
+
+    success $i;
+}
+
+$#ARGV < 1 or die "ktest.pl version: $VERSION\n   usage: ktest.pl [config-file]\n";
+
+if ($#ARGV == 0) {
+    $ktest_config = $ARGV[0];
+    if (! -f $ktest_config) {
+	print "$ktest_config does not exist.\n";
+	if (!read_yn "Create it?") {
+	    exit 0;
+	}
+    }
+}
+
+if (! -f $ktest_config) {
+    $newconfig = 1;
+    get_test_case;
+    open(OUT, ">$ktest_config") or die "Can not create $ktest_config";
+    print OUT << "EOF"
+# Generated by ktest.pl
+#
+
+# PWD is a ktest.pl variable that will result in the process working
+# directory that ktest.pl is executed in.
+
+# THIS_DIR is automatically assigned the PWD of the path that generated
+# the config file. It is best to use this variable when assigning other
+# directory paths within this directory. This allows you to easily
+# move the test cases to other locations or to other machines.
+#
+THIS_DIR := $variable{"PWD"}
+
+# Define each test with TEST_START
+# The config options below it will override the defaults
+TEST_START
+TEST_TYPE = $default{"TEST_TYPE"}
+
+DEFAULTS
+EOF
+;
+    close(OUT);
+}
+read_config $ktest_config;
+
+if (defined($opt{"LOG_FILE"})) {
+    $opt{"LOG_FILE"} = eval_option("LOG_FILE", $opt{"LOG_FILE"}, -1);
+}
+
+# Append any configs entered in manually to the config file.
+my @new_configs = keys %entered_configs;
+if ($#new_configs >= 0) {
+    print "\nAppending entered in configs to $ktest_config\n";
+    open(OUT, ">>$ktest_config") or die "Can not append to $ktest_config";
+    foreach my $config (@new_configs) {
+	print OUT "$config = $entered_configs{$config}\n";
+	$opt{$config} = process_variables($entered_configs{$config});
+    }
+}
+
+if ($opt{"CLEAR_LOG"} && defined($opt{"LOG_FILE"})) {
+    unlink $opt{"LOG_FILE"};
+}
+
+doprint "\n\nSTARTING AUTOMATED TESTS\n\n";
+
+for (my $i = 0, my $repeat = 1; $i <= $opt{"NUM_TESTS"}; $i += $repeat) {
+
+    if (!$i) {
+	doprint "DEFAULT OPTIONS:\n";
+    } else {
+	doprint "\nTEST $i OPTIONS";
+	if (defined($repeat_tests{$i})) {
+	    $repeat = $repeat_tests{$i};
+	    doprint " ITERATE $repeat";
+	}
+	doprint "\n";
+    }
+
+    foreach my $option (sort keys %opt) {
+
+	if ($option =~ /\[(\d+)\]$/) {
+	    next if ($i != $1);
+	} else {
+	    next if ($i);
+	}
+
+	doprint "$option = $opt{$option}\n";
+    }
+}
+
+sub option_defined {
+    my ($option) = @_;
+
+    if (defined($opt{$option}) && $opt{$option} !~ /^\s*$/) {
+	return 1;
+    }
+
+    return 0;
+}
+
+sub __set_test_option {
+    my ($name, $i) = @_;
+
+    my $option = "$name\[$i\]";
+
+    if (option_defined($option)) {
+	return $opt{$option};
+    }
+
+    foreach my $test (keys %repeat_tests) {
+	if ($i >= $test &&
+	    $i < $test + $repeat_tests{$test}) {
+	    $option = "$name\[$test\]";
+	    if (option_defined($option)) {
+		return $opt{$option};
+	    }
+	}
+    }
+
+    if (option_defined($name)) {
+	return $opt{$name};
+    }
+
+    return undef;
+}
+
+sub set_test_option {
+    my ($name, $i) = @_;
+
+    my $option = __set_test_option($name, $i);
+    return $option if (!defined($option));
+
+    return eval_option($name, $option, $i);
+}
+
+sub find_mailer {
+    my ($mailer) = @_;
+
+    my @paths = split /:/, $ENV{PATH};
+
+    # sendmail is usually in /usr/sbin
+    $paths[$#paths + 1] = "/usr/sbin";
+
+    foreach my $path (@paths) {
+	if (-x "$path/$mailer") {
+	    return $path;
+	}
+    }
+
+    return undef;
+}
+
+sub do_send_mail {
+    my ($subject, $message) = @_;
+
+    if (!defined($mail_path)) {
+	# find the mailer
+	$mail_path = find_mailer $mailer;
+	if (!defined($mail_path)) {
+	    die "\nCan not find $mailer in PATH\n";
+	}
+    }
+
+    if (!defined($mail_command)) {
+	if ($mailer eq "mail" || $mailer eq "mailx") {
+	    $mail_command = "\$MAIL_PATH/\$MAILER -s \'\$SUBJECT\' \$MAILTO <<< \'\$MESSAGE\'";
+	} elsif ($mailer eq "sendmail" ) {
+	    $mail_command =  "echo \'Subject: \$SUBJECT\n\n\$MESSAGE\' | \$MAIL_PATH/\$MAILER -t \$MAILTO";
+	} else {
+	    die "\nYour mailer: $mailer is not supported.\n";
+	}
+    }
+
+    $mail_command =~ s/\$MAILER/$mailer/g;
+    $mail_command =~ s/\$MAIL_PATH/$mail_path/g;
+    $mail_command =~ s/\$MAILTO/$mailto/g;
+    $mail_command =~ s/\$SUBJECT/$subject/g;
+    $mail_command =~ s/\$MESSAGE/$message/g;
+
+    my $ret = run_command $mail_command;
+    if (!$ret && defined($file)) {
+	# try again without the file
+	$message .= "\n\n*** FAILED TO SEND LOG ***\n\n";
+	do_send_email($subject, $message);
+    }
+}
+
+sub send_email {
+
+    if (defined($mailto)) {
+	if (!defined($mailer)) {
+	    doprint "No email sent: email or mailer not specified in config.\n";
+	    return;
+	}
+	do_send_mail @_;
+    }
+}
+
+sub cancel_test {
+    if ($email_when_canceled) {
+        send_email("KTEST: Your [$test_type] test was cancelled",
+                "Your test started at $script_start_time was cancelled: sig int");
+    }
+    die "\nCaught Sig Int, test interrupted: $!\n"
+}
+
+$SIG{INT} = qw(cancel_test);
+
+# First we need to do is the builds
+for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
+
+    # Do not reboot on failing test options
+    $no_reboot = 1;
+    $reboot_success = 0;
+
+    $have_version = 0;
+
+    $iteration = $i;
+
+    $build_time = 0;
+    $install_time = 0;
+    $reboot_time = 0;
+    $test_time = 0;
+
+    undef %force_config;
+
+    my $makecmd = set_test_option("MAKE_CMD", $i);
+
+    $outputdir = set_test_option("OUTPUT_DIR", $i);
+    $builddir = set_test_option("BUILD_DIR", $i);
+
+    chdir $builddir || dodie "can't change directory to $builddir";
+
+    if (!-d $outputdir) {
+	mkpath($outputdir) or
+	    dodie "can't create $outputdir";
+    }
+
+    $make = "$makecmd O=$outputdir";
+
+    # Load all the options into their mapped variable names
+    foreach my $opt (keys %option_map) {
+	${$option_map{$opt}} = set_test_option($opt, $i);
+    }
+
+    $start_minconfig_defined = 1;
+
+    # The first test may override the PRE_KTEST option
+    if ($i == 1) {
+        if (defined($pre_ktest)) {
+            doprint "\n";
+            run_command $pre_ktest;
+        }
+        if ($email_when_started) {
+            send_email("KTEST: Your [$test_type] test was started",
+                "Your test was started on $script_start_time");
+        }
+    }
+
+    # Any test can override the POST_KTEST option
+    # The last test takes precedence.
+    if (defined($post_ktest)) {
+	$final_post_ktest = $post_ktest;
+    }
+
+    if (!defined($start_minconfig)) {
+	$start_minconfig_defined = 0;
+	$start_minconfig = $minconfig;
+    }
+
+    if (!-d $tmpdir) {
+	mkpath($tmpdir) or
+	    dodie "can't create $tmpdir";
+    }
+
+    $ENV{"SSH_USER"} = $ssh_user;
+    $ENV{"MACHINE"} = $machine;
+
+    $buildlog = "$tmpdir/buildlog-$machine";
+    $testlog = "$tmpdir/testlog-$machine";
+    $dmesg = "$tmpdir/dmesg-$machine";
+    $output_config = "$outputdir/.config";
+
+    if (!$buildonly) {
+	$target = "$ssh_user\@$machine";
+	if ($reboot_type eq "grub") {
+	    dodie "GRUB_MENU not defined" if (!defined($grub_menu));
+	} elsif ($reboot_type eq "grub2") {
+	    dodie "GRUB_MENU not defined" if (!defined($grub_menu));
+	    dodie "GRUB_FILE not defined" if (!defined($grub_file));
+	} elsif ($reboot_type eq "syslinux") {
+	    dodie "SYSLINUX_LABEL not defined" if (!defined($syslinux_label));
+	}
+    }
+
+    my $run_type = $build_type;
+    if ($test_type eq "patchcheck") {
+	$run_type = $patchcheck_type;
+    } elsif ($test_type eq "bisect") {
+	$run_type = $bisect_type;
+    } elsif ($test_type eq "config_bisect") {
+	$run_type = $config_bisect_type;
+    } elsif ($test_type eq "make_min_config") {
+	$run_type = "";
+    } elsif ($test_type eq "make_warnings_file") {
+	$run_type = "";
+    }
+
+    # mistake in config file?
+    if (!defined($run_type)) {
+	$run_type = "ERROR";
+    }
+
+    my $installme = "";
+    $installme = " no_install" if ($no_install);
+
+    my $name = "";
+
+    if (defined($test_name)) {
+	$name = " ($test_name)";
+    }
+
+    doprint "\n\n";
+    doprint "RUNNING TEST $i of $opt{NUM_TESTS}$name with option $test_type $run_type$installme\n\n";
+
+    if (defined($pre_test)) {
+	run_command $pre_test;
+    }
+
+    unlink $dmesg;
+    unlink $buildlog;
+    unlink $testlog;
+
+    if (defined($addconfig)) {
+	my $min = $minconfig;
+	if (!defined($minconfig)) {
+	    $min = "";
+	}
+	run_command "cat $addconfig $min > $tmpdir/add_config" or
+	    dodie "Failed to create temp config";
+	$minconfig = "$tmpdir/add_config";
+    }
+
+    if (defined($checkout)) {
+	run_command "git checkout $checkout" or
+	    dodie "failed to checkout $checkout";
+    }
+
+    $no_reboot = 0;
+
+    # A test may opt to not reboot the box
+    if ($reboot_on_success) {
+	$reboot_success = 1;
+    }
+
+    if ($test_type eq "bisect") {
+	bisect $i;
+	next;
+    } elsif ($test_type eq "config_bisect") {
+	config_bisect $i;
+	next;
+    } elsif ($test_type eq "patchcheck") {
+	patchcheck $i;
+	next;
+    } elsif ($test_type eq "make_min_config") {
+	make_min_config $i;
+	next;
+    } elsif ($test_type eq "make_warnings_file") {
+	$no_reboot = 1;
+	make_warnings_file $i;
+	next;
+    }
+
+    if ($build_type ne "nobuild") {
+	build $build_type or next;
+	check_buildlog or next;
+    }
+
+    if ($test_type eq "install") {
+	get_version;
+	install;
+	success $i;
+	next;
+    }
+
+    if ($test_type ne "build") {
+	my $failed = 0;
+	start_monitor_and_install or $failed = 1;
+
+	if (!$failed && $test_type ne "boot" && defined($run_test)) {
+	    do_run_test or $failed = 1;
+	}
+	end_monitor;
+	if ($failed) {
+	    print_times;
+	    next;
+	}
+    }
+
+    print_times;
+
+    success $i;
+}
+
+if (defined($final_post_ktest)) {
+    run_command $final_post_ktest;
+}
+
+if ($opt{"POWEROFF_ON_SUCCESS"}) {
+    halt;
+} elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot && $reboot_success) {
+    reboot_to_good;
+} elsif (defined($switch_to_good)) {
+    # still need to get to the good kernel
+    run_command $switch_to_good;
+}
+
+
+doprint "\n    $successes of $opt{NUM_TESTS} tests were successful\n\n";
+
+if ($email_when_finished) {
+    send_email("KTEST: Your [$test_type] test has finished!",
+            "$successes of $opt{NUM_TESTS} tests started at $script_start_time were successful!");
+}
+exit 0;