Adding upstream version 4.19.249.upstream/4.19.249upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1439 insertions, 0 deletions

diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh
new file mode 100755
index 000000000..a5ba14976
--- /dev/null
+++ b/tools/testing/selftests/net/fib_tests.sh
@@ -0,0 +1,1439 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test is for checking IPv4 and IPv6 FIB behavior in response to
+# different events.
+
+ret=0
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+# all tests in this script. Can be overridden with -t option
+TESTS="unregister down carrier nexthop ipv6_rt ipv4_rt ipv6_addr_metric ipv4_addr_metric"
+VERBOSE=0
+PAUSE_ON_FAIL=no
+PAUSE=no
+IP="ip -netns testns"
+
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	if [ ${rc} -eq ${expected} ]; then
+		printf "    TEST: %-60s  [ OK ]\n" "${msg}"
+		nsuccess=$((nsuccess+1))
+	else
+		ret=1
+		nfail=$((nfail+1))
+		printf "    TEST: %-60s  [FAIL]\n" "${msg}"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+		echo
+			echo "hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+	fi
+
+	if [ "${PAUSE}" = "yes" ]; then
+		echo
+		echo "hit enter to continue, 'q' to quit"
+		read a
+		[ "$a" = "q" ] && exit 1
+	fi
+}
+
+setup()
+{
+	set -e
+	ip netns add testns
+	$IP link set dev lo up
+
+	$IP link add dummy0 type dummy
+	$IP link set dev dummy0 up
+	$IP address add 198.51.100.1/24 dev dummy0
+	$IP -6 address add 2001:db8:1::1/64 dev dummy0
+	set +e
+
+}
+
+cleanup()
+{
+	$IP link del dev dummy0 &> /dev/null
+	ip netns del testns
+}
+
+get_linklocal()
+{
+	local dev=$1
+	local addr
+
+	addr=$($IP -6 -br addr show dev ${dev} | \
+	awk '{
+		for (i = 3; i <= NF; ++i) {
+			if ($i ~ /^fe80/)
+				print $i
+		}
+	}'
+	)
+	addr=${addr/\/*}
+
+	[ -z "$addr" ] && return 1
+
+	echo $addr
+
+	return 0
+}
+
+fib_unreg_unicast_test()
+{
+	echo
+	echo "Single path route test"
+
+	setup
+
+	echo "    Start point"
+	$IP route get fibmatch 198.51.100.2 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	set -e
+	$IP link del dev dummy0
+	set +e
+
+	echo "    Nexthop device deleted"
+	$IP route get fibmatch 198.51.100.2 &> /dev/null
+	log_test $? 2 "IPv4 fibmatch - no route"
+	$IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null
+	log_test $? 2 "IPv6 fibmatch - no route"
+
+	cleanup
+}
+
+fib_unreg_multipath_test()
+{
+
+	echo
+	echo "Multipath route test"
+
+	setup
+
+	set -e
+	$IP link add dummy1 type dummy
+	$IP link set dev dummy1 up
+	$IP address add 192.0.2.1/24 dev dummy1
+	$IP -6 address add 2001:db8:2::1/64 dev dummy1
+
+	$IP route add 203.0.113.0/24 \
+		nexthop via 198.51.100.2 dev dummy0 \
+		nexthop via 192.0.2.2 dev dummy1
+	$IP -6 route add 2001:db8:3::/64 \
+		nexthop via 2001:db8:1::2 dev dummy0 \
+		nexthop via 2001:db8:2::2 dev dummy1
+	set +e
+
+	echo "    Start point"
+	$IP route get fibmatch 203.0.113.1 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	set -e
+	$IP link del dev dummy0
+	set +e
+
+	echo "    One nexthop device deleted"
+	$IP route get fibmatch 203.0.113.1 &> /dev/null
+	log_test $? 2 "IPv4 - multipath route removed on delete"
+
+	$IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null
+	# In IPv6 we do not flush the entire multipath route.
+	log_test $? 0 "IPv6 - multipath down to single path"
+
+	set -e
+	$IP link del dev dummy1
+	set +e
+
+	echo "    Second nexthop device deleted"
+	$IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null
+	log_test $? 2 "IPv6 - no route"
+
+	cleanup
+}
+
+fib_unreg_test()
+{
+	fib_unreg_unicast_test
+	fib_unreg_multipath_test
+}
+
+fib_down_unicast_test()
+{
+	echo
+	echo "Single path, admin down"
+
+	setup
+
+	echo "    Start point"
+	$IP route get fibmatch 198.51.100.2 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	set -e
+	$IP link set dev dummy0 down
+	set +e
+
+	echo "    Route deleted on down"
+	$IP route get fibmatch 198.51.100.2 &> /dev/null
+	log_test $? 2 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null
+	log_test $? 2 "IPv6 fibmatch"
+
+	cleanup
+}
+
+fib_down_multipath_test_do()
+{
+	local down_dev=$1
+	local up_dev=$2
+
+	$IP route get fibmatch 203.0.113.1 \
+		oif $down_dev &> /dev/null
+	log_test $? 2 "IPv4 fibmatch on down device"
+	$IP -6 route get fibmatch 2001:db8:3::1 \
+		oif $down_dev &> /dev/null
+	log_test $? 2 "IPv6 fibmatch on down device"
+
+	$IP route get fibmatch 203.0.113.1 \
+		oif $up_dev &> /dev/null
+	log_test $? 0 "IPv4 fibmatch on up device"
+	$IP -6 route get fibmatch 2001:db8:3::1 \
+		oif $up_dev &> /dev/null
+	log_test $? 0 "IPv6 fibmatch on up device"
+
+	$IP route get fibmatch 203.0.113.1 | \
+		grep $down_dev | grep -q "dead linkdown"
+	log_test $? 0 "IPv4 flags on down device"
+	$IP -6 route get fibmatch 2001:db8:3::1 | \
+		grep $down_dev | grep -q "dead linkdown"
+	log_test $? 0 "IPv6 flags on down device"
+
+	$IP route get fibmatch 203.0.113.1 | \
+		grep $up_dev | grep -q "dead linkdown"
+	log_test $? 1 "IPv4 flags on up device"
+	$IP -6 route get fibmatch 2001:db8:3::1 | \
+		grep $up_dev | grep -q "dead linkdown"
+	log_test $? 1 "IPv6 flags on up device"
+}
+
+fib_down_multipath_test()
+{
+	echo
+	echo "Admin down multipath"
+
+	setup
+
+	set -e
+	$IP link add dummy1 type dummy
+	$IP link set dev dummy1 up
+
+	$IP address add 192.0.2.1/24 dev dummy1
+	$IP -6 address add 2001:db8:2::1/64 dev dummy1
+
+	$IP route add 203.0.113.0/24 \
+		nexthop via 198.51.100.2 dev dummy0 \
+		nexthop via 192.0.2.2 dev dummy1
+	$IP -6 route add 2001:db8:3::/64 \
+		nexthop via 2001:db8:1::2 dev dummy0 \
+		nexthop via 2001:db8:2::2 dev dummy1
+	set +e
+
+	echo "    Verify start point"
+	$IP route get fibmatch 203.0.113.1 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+
+	$IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	set -e
+	$IP link set dev dummy0 down
+	set +e
+
+	echo "    One device down, one up"
+	fib_down_multipath_test_do "dummy0" "dummy1"
+
+	set -e
+	$IP link set dev dummy0 up
+	$IP link set dev dummy1 down
+	set +e
+
+	echo "    Other device down and up"
+	fib_down_multipath_test_do "dummy1" "dummy0"
+
+	set -e
+	$IP link set dev dummy0 down
+	set +e
+
+	echo "    Both devices down"
+	$IP route get fibmatch 203.0.113.1 &> /dev/null
+	log_test $? 2 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null
+	log_test $? 2 "IPv6 fibmatch"
+
+	$IP link del dev dummy1
+	cleanup
+}
+
+fib_down_test()
+{
+	fib_down_unicast_test
+	fib_down_multipath_test
+}
+
+# Local routes should not be affected when carrier changes.
+fib_carrier_local_test()
+{
+	echo
+	echo "Local carrier tests - single path"
+
+	setup
+
+	set -e
+	$IP link set dev dummy0 carrier on
+	set +e
+
+	echo "    Start point"
+	$IP route get fibmatch 198.51.100.1 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:1::1 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	$IP route get fibmatch 198.51.100.1 | \
+		grep -q "linkdown"
+	log_test $? 1 "IPv4 - no linkdown flag"
+	$IP -6 route get fibmatch 2001:db8:1::1 | \
+		grep -q "linkdown"
+	log_test $? 1 "IPv6 - no linkdown flag"
+
+	set -e
+	$IP link set dev dummy0 carrier off
+	sleep 1
+	set +e
+
+	echo "    Carrier off on nexthop"
+	$IP route get fibmatch 198.51.100.1 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:1::1 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	$IP route get fibmatch 198.51.100.1 | \
+		grep -q "linkdown"
+	log_test $? 1 "IPv4 - linkdown flag set"
+	$IP -6 route get fibmatch 2001:db8:1::1 | \
+		grep -q "linkdown"
+	log_test $? 1 "IPv6 - linkdown flag set"
+
+	set -e
+	$IP address add 192.0.2.1/24 dev dummy0
+	$IP -6 address add 2001:db8:2::1/64 dev dummy0
+	set +e
+
+	echo "    Route to local address with carrier down"
+	$IP route get fibmatch 192.0.2.1 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:2::1 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	$IP route get fibmatch 192.0.2.1 | \
+		grep -q "linkdown"
+	log_test $? 1 "IPv4 linkdown flag set"
+	$IP -6 route get fibmatch 2001:db8:2::1 | \
+		grep -q "linkdown"
+	log_test $? 1 "IPv6 linkdown flag set"
+
+	cleanup
+}
+
+fib_carrier_unicast_test()
+{
+	ret=0
+
+	echo
+	echo "Single path route carrier test"
+
+	setup
+
+	set -e
+	$IP link set dev dummy0 carrier on
+	set +e
+
+	echo "    Start point"
+	$IP route get fibmatch 198.51.100.2 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	$IP route get fibmatch 198.51.100.2 | \
+		grep -q "linkdown"
+	log_test $? 1 "IPv4 no linkdown flag"
+	$IP -6 route get fibmatch 2001:db8:1::2 | \
+		grep -q "linkdown"
+	log_test $? 1 "IPv6 no linkdown flag"
+
+	set -e
+	$IP link set dev dummy0 carrier off
+	sleep 1
+	set +e
+
+	echo "    Carrier down"
+	$IP route get fibmatch 198.51.100.2 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	$IP route get fibmatch 198.51.100.2 | \
+		grep -q "linkdown"
+	log_test $? 0 "IPv4 linkdown flag set"
+	$IP -6 route get fibmatch 2001:db8:1::2 | \
+		grep -q "linkdown"
+	log_test $? 0 "IPv6 linkdown flag set"
+
+	set -e
+	$IP address add 192.0.2.1/24 dev dummy0
+	$IP -6 address add 2001:db8:2::1/64 dev dummy0
+	set +e
+
+	echo "    Second address added with carrier down"
+	$IP route get fibmatch 192.0.2.2 &> /dev/null
+	log_test $? 0 "IPv4 fibmatch"
+	$IP -6 route get fibmatch 2001:db8:2::2 &> /dev/null
+	log_test $? 0 "IPv6 fibmatch"
+
+	$IP route get fibmatch 192.0.2.2 | \
+		grep -q "linkdown"
+	log_test $? 0 "IPv4 linkdown flag set"
+	$IP -6 route get fibmatch 2001:db8:2::2 | \
+		grep -q "linkdown"
+	log_test $? 0 "IPv6 linkdown flag set"
+
+	cleanup
+}
+
+fib_carrier_test()
+{
+	fib_carrier_local_test
+	fib_carrier_unicast_test
+}
+
+################################################################################
+# Tests on nexthop spec
+
+# run 'ip route add' with given spec
+add_rt()
+{
+	local desc="$1"
+	local erc=$2
+	local vrf=$3
+	local pfx=$4
+	local gw=$5
+	local dev=$6
+	local cmd out rc
+
+	[ "$vrf" = "-" ] && vrf="default"
+	[ -n "$gw" ] && gw="via $gw"
+	[ -n "$dev" ] && dev="dev $dev"
+
+	cmd="$IP route add vrf $vrf $pfx $gw $dev"
+	if [ "$VERBOSE" = "1" ]; then
+		printf "\n    COMMAND: $cmd\n"
+	fi
+
+	out=$(eval $cmd 2>&1)
+	rc=$?
+	if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+		echo "    $out"
+	fi
+	log_test $rc $erc "$desc"
+}
+
+fib4_nexthop()
+{
+	echo
+	echo "IPv4 nexthop tests"
+
+	echo "<<< write me >>>"
+}
+
+fib6_nexthop()
+{
+	local lldummy=$(get_linklocal dummy0)
+	local llv1=$(get_linklocal dummy0)
+
+	if [ -z "$lldummy" ]; then
+		echo "Failed to get linklocal address for dummy0"
+		return 1
+	fi
+	if [ -z "$llv1" ]; then
+		echo "Failed to get linklocal address for veth1"
+		return 1
+	fi
+
+	echo
+	echo "IPv6 nexthop tests"
+
+	add_rt "Directly connected nexthop, unicast address" 0 \
+		- 2001:db8:101::/64 2001:db8:1::2
+	add_rt "Directly connected nexthop, unicast address with device" 0 \
+		- 2001:db8:102::/64 2001:db8:1::2 "dummy0"
+	add_rt "Gateway is linklocal address" 0 \
+		- 2001:db8:103::1/64 $llv1 "veth0"
+
+	# fails because LL address requires a device
+	add_rt "Gateway is linklocal address, no device" 2 \
+		- 2001:db8:104::1/64 $llv1
+
+	# local address can not be a gateway
+	add_rt "Gateway can not be local unicast address" 2 \
+		- 2001:db8:105::/64 2001:db8:1::1
+	add_rt "Gateway can not be local unicast address, with device" 2 \
+		- 2001:db8:106::/64 2001:db8:1::1 "dummy0"
+	add_rt "Gateway can not be a local linklocal address" 2 \
+		- 2001:db8:107::1/64 $lldummy "dummy0"
+
+	# VRF tests
+	add_rt "Gateway can be local address in a VRF" 0 \
+		- 2001:db8:108::/64 2001:db8:51::2
+	add_rt "Gateway can be local address in a VRF, with device" 0 \
+		- 2001:db8:109::/64 2001:db8:51::2 "veth0"
+	add_rt "Gateway can be local linklocal address in a VRF" 0 \
+		- 2001:db8:110::1/64 $llv1 "veth0"
+
+	add_rt "Redirect to VRF lookup" 0 \
+		- 2001:db8:111::/64 "" "red"
+
+	add_rt "VRF route, gateway can be local address in default VRF" 0 \
+		red 2001:db8:112::/64 2001:db8:51::1
+
+	# local address in same VRF fails
+	add_rt "VRF route, gateway can not be a local address" 2 \
+		red 2001:db8:113::1/64 2001:db8:2::1
+	add_rt "VRF route, gateway can not be a local addr with device" 2 \
+		red 2001:db8:114::1/64 2001:db8:2::1 "dummy1"
+}
+
+# Default VRF:
+#   dummy0 - 198.51.100.1/24 2001:db8:1::1/64
+#   veth0  - 192.0.2.1/24    2001:db8:51::1/64
+#
+# VRF red:
+#   dummy1 - 192.168.2.1/24 2001:db8:2::1/64
+#   veth1  - 192.0.2.2/24   2001:db8:51::2/64
+#
+#  [ dummy0   veth0 ]--[ veth1   dummy1 ]
+
+fib_nexthop_test()
+{
+	setup
+
+	set -e
+
+	$IP -4 rule add pref 32765 table local
+	$IP -4 rule del pref 0
+	$IP -6 rule add pref 32765 table local
+	$IP -6 rule del pref 0
+
+	$IP link add red type vrf table 1
+	$IP link set red up
+	$IP -4 route add vrf red unreachable default metric 4278198272
+	$IP -6 route add vrf red unreachable default metric 4278198272
+
+	$IP link add veth0 type veth peer name veth1
+	$IP link set dev veth0 up
+	$IP address add 192.0.2.1/24 dev veth0
+	$IP -6 address add 2001:db8:51::1/64 dev veth0
+
+	$IP link set dev veth1 vrf red up
+	$IP address add 192.0.2.2/24 dev veth1
+	$IP -6 address add 2001:db8:51::2/64 dev veth1
+
+	$IP link add dummy1 type dummy
+	$IP link set dev dummy1 vrf red up
+	$IP address add 192.168.2.1/24 dev dummy1
+	$IP -6 address add 2001:db8:2::1/64 dev dummy1
+	set +e
+
+	sleep 1
+	fib4_nexthop
+	fib6_nexthop
+
+	(
+	$IP link del dev dummy1
+	$IP link del veth0
+	$IP link del red
+	) 2>/dev/null
+	cleanup
+}
+
+################################################################################
+# Tests on route add and replace
+
+run_cmd()
+{
+	local cmd="$1"
+	local out
+	local stderr="2>/dev/null"
+
+	if [ "$VERBOSE" = "1" ]; then
+		printf "    COMMAND: $cmd\n"
+		stderr=
+	fi
+
+	out=$(eval $cmd $stderr)
+	rc=$?
+	if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+		echo "    $out"
+	fi
+
+	[ "$VERBOSE" = "1" ] && echo
+
+	return $rc
+}
+
+check_expected()
+{
+	local out="$1"
+	local expected="$2"
+	local rc=0
+
+	[ "${out}" = "${expected}" ] && return 0
+
+	if [ -z "${out}" ]; then
+		if [ "$VERBOSE" = "1" ]; then
+			printf "\nNo route entry found\n"
+			printf "Expected:\n"
+			printf "    ${expected}\n"
+		fi
+		return 1
+	fi
+
+	# tricky way to convert output to 1-line without ip's
+	# messy '\'; this drops all extra white space
+	out=$(echo ${out})
+	if [ "${out}" != "${expected}" ]; then
+		rc=1
+		if [ "${VERBOSE}" = "1" ]; then
+			printf "    Unexpected route entry. Have:\n"
+			printf "        ${out}\n"
+			printf "    Expected:\n"
+			printf "        ${expected}\n\n"
+		fi
+	fi
+
+	return $rc
+}
+
+# add route for a prefix, flushing any existing routes first
+# expected to be the first step of a test
+add_route6()
+{
+	local pfx="$1"
+	local nh="$2"
+	local out
+
+	if [ "$VERBOSE" = "1" ]; then
+		echo
+		echo "    ##################################################"
+		echo
+	fi
+
+	run_cmd "$IP -6 ro flush ${pfx}"
+	[ $? -ne 0 ] && exit 1
+
+	out=$($IP -6 ro ls match ${pfx})
+	if [ -n "$out" ]; then
+		echo "Failed to flush routes for prefix used for tests."
+		exit 1
+	fi
+
+	run_cmd "$IP -6 ro add ${pfx} ${nh}"
+	if [ $? -ne 0 ]; then
+		echo "Failed to add initial route for test."
+		exit 1
+	fi
+}
+
+# add initial route - used in replace route tests
+add_initial_route6()
+{
+	add_route6 "2001:db8:104::/64" "$1"
+}
+
+check_route6()
+{
+	local pfx="2001:db8:104::/64"
+	local expected="$1"
+	local out
+	local rc=0
+
+	out=$($IP -6 ro ls match ${pfx} | sed -e 's/ pref medium//')
+	check_expected "${out}" "${expected}"
+}
+
+route_cleanup()
+{
+	$IP li del red 2>/dev/null
+	$IP li del dummy1 2>/dev/null
+	$IP li del veth1 2>/dev/null
+	$IP li del veth3 2>/dev/null
+
+	cleanup &> /dev/null
+}
+
+route_setup()
+{
+	route_cleanup
+	setup
+
+	[ "${VERBOSE}" = "1" ] && set -x
+	set -e
+
+	$IP li add red up type vrf table 101
+	$IP li add veth1 type veth peer name veth2
+	$IP li add veth3 type veth peer name veth4
+
+	$IP li set veth1 up
+	$IP li set veth3 up
+	$IP li set veth2 vrf red up
+	$IP li set veth4 vrf red up
+	$IP li add dummy1 type dummy
+	$IP li set dummy1 vrf red up
+
+	$IP -6 addr add 2001:db8:101::1/64 dev veth1
+	$IP -6 addr add 2001:db8:101::2/64 dev veth2
+	$IP -6 addr add 2001:db8:103::1/64 dev veth3
+	$IP -6 addr add 2001:db8:103::2/64 dev veth4
+	$IP -6 addr add 2001:db8:104::1/64 dev dummy1
+
+	$IP addr add 172.16.101.1/24 dev veth1
+	$IP addr add 172.16.101.2/24 dev veth2
+	$IP addr add 172.16.103.1/24 dev veth3
+	$IP addr add 172.16.103.2/24 dev veth4
+	$IP addr add 172.16.104.1/24 dev dummy1
+
+	set +e
+}
+
+# assumption is that basic add of a single path route works
+# otherwise just adding an address on an interface is broken
+ipv6_rt_add()
+{
+	local rc
+
+	echo
+	echo "IPv6 route add / append tests"
+
+	# route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL
+	add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
+	run_cmd "$IP -6 ro add 2001:db8:104::/64 via 2001:db8:103::2"
+	log_test $? 2 "Attempt to add duplicate route - gw"
+
+	# route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL
+	add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
+	run_cmd "$IP -6 ro add 2001:db8:104::/64 dev veth3"
+	log_test $? 2 "Attempt to add duplicate route - dev only"
+
+	# route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL
+	add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
+	run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64"
+	log_test $? 2 "Attempt to add duplicate route - reject route"
+
+	# route append with same prefix adds a new route
+	# - iproute2 sets NLM_F_CREATE | NLM_F_APPEND
+	add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
+	run_cmd "$IP -6 ro append 2001:db8:104::/64 via 2001:db8:103::2"
+	check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
+	log_test $? 0 "Append nexthop to existing route - gw"
+
+	# insert mpath directly
+	add_route6 "2001:db8:104::/64" "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	check_route6  "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
+	log_test $? 0 "Add multipath route"
+
+	add_route6 "2001:db8:104::/64" "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	run_cmd "$IP -6 ro add 2001:db8:104::/64 nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	log_test $? 2 "Attempt to add duplicate multipath route"
+
+	# insert of a second route without append but different metric
+	add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
+	run_cmd "$IP -6 ro add 2001:db8:104::/64 via 2001:db8:103::2 metric 512"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		run_cmd "$IP -6 ro add 2001:db8:104::/64 via 2001:db8:103::3 metric 256"
+		rc=$?
+	fi
+	log_test $rc 0 "Route add with different metrics"
+
+	run_cmd "$IP -6 ro del 2001:db8:104::/64 metric 512"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route6 "2001:db8:104::/64 via 2001:db8:103::3 dev veth3 metric 256 2001:db8:104::/64 via 2001:db8:101::2 dev veth1 metric 1024"
+		rc=$?
+	fi
+	log_test $rc 0 "Route delete with metric"
+}
+
+ipv6_rt_replace_single()
+{
+	# single path with single path
+	#
+	add_initial_route6 "via 2001:db8:101::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 via 2001:db8:103::2"
+	check_route6 "2001:db8:104::/64 via 2001:db8:103::2 dev veth3 metric 1024"
+	log_test $? 0 "Single path with single path"
+
+	# single path with multipath
+	#
+	add_initial_route6 "nexthop via 2001:db8:101::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:103::2"
+	check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::3 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
+	log_test $? 0 "Single path with multipath"
+
+	# single path with single path using MULTIPATH attribute
+	#
+	add_initial_route6 "via 2001:db8:101::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:103::2"
+	check_route6 "2001:db8:104::/64 via 2001:db8:103::2 dev veth3 metric 1024"
+	log_test $? 0 "Single path with single path via multipath attribute"
+
+	# route replace fails - invalid nexthop
+	add_initial_route6 "via 2001:db8:101::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 via 2001:db8:104::2"
+	if [ $? -eq 0 ]; then
+		# previous command is expected to fail so if it returns 0
+		# that means the test failed.
+		log_test 0 1 "Invalid nexthop"
+	else
+		check_route6 "2001:db8:104::/64 via 2001:db8:101::2 dev veth1 metric 1024"
+		log_test $? 0 "Invalid nexthop"
+	fi
+
+	# replace non-existent route
+	# - note use of change versus replace since ip adds NLM_F_CREATE
+	#   for replace
+	add_initial_route6 "via 2001:db8:101::2"
+	run_cmd "$IP -6 ro change 2001:db8:105::/64 via 2001:db8:101::2"
+	log_test $? 2 "Single path - replace of non-existent route"
+}
+
+ipv6_rt_replace_mpath()
+{
+	# multipath with multipath
+	add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:103::3"
+	check_route6  "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::3 dev veth1 weight 1 nexthop via 2001:db8:103::3 dev veth3 weight 1"
+	log_test $? 0 "Multipath with multipath"
+
+	# multipath with single
+	add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 via 2001:db8:101::3"
+	check_route6  "2001:db8:104::/64 via 2001:db8:101::3 dev veth1 metric 1024"
+	log_test $? 0 "Multipath with single path"
+
+	# multipath with single
+	add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3"
+	check_route6 "2001:db8:104::/64 via 2001:db8:101::3 dev veth1 metric 1024"
+	log_test $? 0 "Multipath with single path via multipath attribute"
+
+	# multipath with dev-only
+	add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 dev veth1"
+	check_route6 "2001:db8:104::/64 dev veth1 metric 1024"
+	log_test $? 0 "Multipath with dev-only"
+
+	# route replace fails - invalid nexthop 1
+	add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:111::3 nexthop via 2001:db8:103::3"
+	check_route6  "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
+	log_test $? 0 "Multipath - invalid first nexthop"
+
+	# route replace fails - invalid nexthop 2
+	add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:113::3"
+	check_route6  "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
+	log_test $? 0 "Multipath - invalid second nexthop"
+
+	# multipath non-existent route
+	add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+	run_cmd "$IP -6 ro change 2001:db8:105::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:103::3"
+	log_test $? 2 "Multipath - replace of non-existent route"
+}
+
+ipv6_rt_replace()
+{
+	echo
+	echo "IPv6 route replace tests"
+
+	ipv6_rt_replace_single
+	ipv6_rt_replace_mpath
+}
+
+ipv6_route_test()
+{
+	route_setup
+
+	ipv6_rt_add
+	ipv6_rt_replace
+
+	route_cleanup
+}
+
+ip_addr_metric_check()
+{
+	ip addr help 2>&1 | grep -q metric
+	if [ $? -ne 0 ]; then
+		echo "iproute2 command does not support metric for addresses. Skipping test"
+		return 1
+	fi
+
+	return 0
+}
+
+ipv6_addr_metric_test()
+{
+	local rc
+
+	echo
+	echo "IPv6 prefix route tests"
+
+	ip_addr_metric_check || return 1
+
+	setup
+
+	set -e
+	$IP li add dummy1 type dummy
+	$IP li add dummy2 type dummy
+	$IP li set dummy1 up
+	$IP li set dummy2 up
+
+	# default entry is metric 256
+	run_cmd "$IP -6 addr add dev dummy1 2001:db8:104::1/64"
+	run_cmd "$IP -6 addr add dev dummy2 2001:db8:104::2/64"
+	set +e
+
+	check_route6 "2001:db8:104::/64 dev dummy1 proto kernel metric 256 2001:db8:104::/64 dev dummy2 proto kernel metric 256"
+	log_test $? 0 "Default metric"
+
+	set -e
+	run_cmd "$IP -6 addr flush dev dummy1"
+	run_cmd "$IP -6 addr add dev dummy1 2001:db8:104::1/64 metric 257"
+	set +e
+
+	check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 256 2001:db8:104::/64 dev dummy1 proto kernel metric 257"
+	log_test $? 0 "User specified metric on first device"
+
+	set -e
+	run_cmd "$IP -6 addr flush dev dummy2"
+	run_cmd "$IP -6 addr add dev dummy2 2001:db8:104::2/64 metric 258"
+	set +e
+
+	check_route6 "2001:db8:104::/64 dev dummy1 proto kernel metric 257 2001:db8:104::/64 dev dummy2 proto kernel metric 258"
+	log_test $? 0 "User specified metric on second device"
+
+	run_cmd "$IP -6 addr del dev dummy1 2001:db8:104::1/64 metric 257"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 258"
+		rc=$?
+	fi
+	log_test $rc 0 "Delete of address on first device"
+
+	run_cmd "$IP -6 addr change dev dummy2 2001:db8:104::2/64 metric 259"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 259"
+		rc=$?
+	fi
+	log_test $rc 0 "Modify metric of address"
+
+	# verify prefix route removed on down
+	run_cmd "ip netns exec testns sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1"
+	run_cmd "$IP li set dev dummy2 down"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		out=$($IP -6 ro ls match 2001:db8:104::/64)
+		check_expected "${out}" ""
+		rc=$?
+	fi
+	log_test $rc 0 "Prefix route removed on link down"
+
+	# verify prefix route re-inserted with assigned metric
+	run_cmd "$IP li set dev dummy2 up"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 259"
+		rc=$?
+	fi
+	log_test $rc 0 "Prefix route with metric on link up"
+
+	# verify peer metric added correctly
+	set -e
+	run_cmd "$IP -6 addr flush dev dummy2"
+	run_cmd "$IP -6 addr add dev dummy2 2001:db8:104::1 peer 2001:db8:104::2 metric 260"
+	set +e
+
+	check_route6 "2001:db8:104::1 dev dummy2 proto kernel metric 260"
+	log_test $? 0 "Set metric with peer route on local side"
+	check_route6 "2001:db8:104::2 dev dummy2 proto kernel metric 260"
+	log_test $? 0 "Set metric with peer route on peer side"
+
+	set -e
+	run_cmd "$IP -6 addr change dev dummy2 2001:db8:104::1 peer 2001:db8:104::3 metric 261"
+	set +e
+
+	check_route6 "2001:db8:104::1 dev dummy2 proto kernel metric 261"
+	log_test $? 0 "Modify metric and peer address on local side"
+	check_route6 "2001:db8:104::3 dev dummy2 proto kernel metric 261"
+	log_test $? 0 "Modify metric and peer address on peer side"
+
+	$IP li del dummy1
+	$IP li del dummy2
+	cleanup
+}
+
+# add route for a prefix, flushing any existing routes first
+# expected to be the first step of a test
+add_route()
+{
+	local pfx="$1"
+	local nh="$2"
+	local out
+
+	if [ "$VERBOSE" = "1" ]; then
+		echo
+		echo "    ##################################################"
+		echo
+	fi
+
+	run_cmd "$IP ro flush ${pfx}"
+	[ $? -ne 0 ] && exit 1
+
+	out=$($IP ro ls match ${pfx})
+	if [ -n "$out" ]; then
+		echo "Failed to flush routes for prefix used for tests."
+		exit 1
+	fi
+
+	run_cmd "$IP ro add ${pfx} ${nh}"
+	if [ $? -ne 0 ]; then
+		echo "Failed to add initial route for test."
+		exit 1
+	fi
+}
+
+# add initial route - used in replace route tests
+add_initial_route()
+{
+	add_route "172.16.104.0/24" "$1"
+}
+
+check_route()
+{
+	local pfx="172.16.104.0/24"
+	local expected="$1"
+	local out
+
+	out=$($IP ro ls match ${pfx})
+	check_expected "${out}" "${expected}"
+}
+
+# assumption is that basic add of a single path route works
+# otherwise just adding an address on an interface is broken
+ipv4_rt_add()
+{
+	local rc
+
+	echo
+	echo "IPv4 route add / append tests"
+
+	# route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL
+	add_route "172.16.104.0/24" "via 172.16.101.2"
+	run_cmd "$IP ro add 172.16.104.0/24 via 172.16.103.2"
+	log_test $? 2 "Attempt to add duplicate route - gw"
+
+	# route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL
+	add_route "172.16.104.0/24" "via 172.16.101.2"
+	run_cmd "$IP ro add 172.16.104.0/24 dev veth3"
+	log_test $? 2 "Attempt to add duplicate route - dev only"
+
+	# route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL
+	add_route "172.16.104.0/24" "via 172.16.101.2"
+	run_cmd "$IP ro add unreachable 172.16.104.0/24"
+	log_test $? 2 "Attempt to add duplicate route - reject route"
+
+	# iproute2 prepend only sets NLM_F_CREATE
+	# - adds a new route; does NOT convert existing route to ECMP
+	add_route "172.16.104.0/24" "via 172.16.101.2"
+	run_cmd "$IP ro prepend 172.16.104.0/24 via 172.16.103.2"
+	check_route "172.16.104.0/24 via 172.16.103.2 dev veth3 172.16.104.0/24 via 172.16.101.2 dev veth1"
+	log_test $? 0 "Add new nexthop for existing prefix"
+
+	# route append with same prefix adds a new route
+	# - iproute2 sets NLM_F_CREATE | NLM_F_APPEND
+	add_route "172.16.104.0/24" "via 172.16.101.2"
+	run_cmd "$IP ro append 172.16.104.0/24 via 172.16.103.2"
+	check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 172.16.104.0/24 via 172.16.103.2 dev veth3"
+	log_test $? 0 "Append nexthop to existing route - gw"
+
+	add_route "172.16.104.0/24" "via 172.16.101.2"
+	run_cmd "$IP ro append 172.16.104.0/24 dev veth3"
+	check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 172.16.104.0/24 dev veth3 scope link"
+	log_test $? 0 "Append nexthop to existing route - dev only"
+
+	add_route "172.16.104.0/24" "via 172.16.101.2"
+	run_cmd "$IP ro append unreachable 172.16.104.0/24"
+	check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 unreachable 172.16.104.0/24"
+	log_test $? 0 "Append nexthop to existing route - reject route"
+
+	run_cmd "$IP ro flush 172.16.104.0/24"
+	run_cmd "$IP ro add unreachable 172.16.104.0/24"
+	run_cmd "$IP ro append 172.16.104.0/24 via 172.16.103.2"
+	check_route "unreachable 172.16.104.0/24 172.16.104.0/24 via 172.16.103.2 dev veth3"
+	log_test $? 0 "Append nexthop to existing reject route - gw"
+
+	run_cmd "$IP ro flush 172.16.104.0/24"
+	run_cmd "$IP ro add unreachable 172.16.104.0/24"
+	run_cmd "$IP ro append 172.16.104.0/24 dev veth3"
+	check_route "unreachable 172.16.104.0/24 172.16.104.0/24 dev veth3 scope link"
+	log_test $? 0 "Append nexthop to existing reject route - dev only"
+
+	# insert mpath directly
+	add_route "172.16.104.0/24" "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	check_route  "172.16.104.0/24 nexthop via 172.16.101.2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1"
+	log_test $? 0 "add multipath route"
+
+	add_route "172.16.104.0/24" "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	run_cmd "$IP ro add 172.16.104.0/24 nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	log_test $? 2 "Attempt to add duplicate multipath route"
+
+	# insert of a second route without append but different metric
+	add_route "172.16.104.0/24" "via 172.16.101.2"
+	run_cmd "$IP ro add 172.16.104.0/24 via 172.16.103.2 metric 512"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		run_cmd "$IP ro add 172.16.104.0/24 via 172.16.103.3 metric 256"
+		rc=$?
+	fi
+	log_test $rc 0 "Route add with different metrics"
+
+	run_cmd "$IP ro del 172.16.104.0/24 metric 512"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.0/24 via 172.16.101.2 dev veth1 172.16.104.0/24 via 172.16.103.3 dev veth3 metric 256"
+		rc=$?
+	fi
+	log_test $rc 0 "Route delete with metric"
+}
+
+ipv4_rt_replace_single()
+{
+	# single path with single path
+	#
+	add_initial_route "via 172.16.101.2"
+	run_cmd "$IP ro replace 172.16.104.0/24 via 172.16.103.2"
+	check_route "172.16.104.0/24 via 172.16.103.2 dev veth3"
+	log_test $? 0 "Single path with single path"
+
+	# single path with multipath
+	#
+	add_initial_route "nexthop via 172.16.101.2"
+	run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3 nexthop via 172.16.103.2"
+	check_route "172.16.104.0/24 nexthop via 172.16.101.3 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1"
+	log_test $? 0 "Single path with multipath"
+
+	# single path with reject
+	#
+	add_initial_route "nexthop via 172.16.101.2"
+	run_cmd "$IP ro replace unreachable 172.16.104.0/24"
+	check_route "unreachable 172.16.104.0/24"
+	log_test $? 0 "Single path with reject route"
+
+	# single path with single path using MULTIPATH attribute
+	#
+	add_initial_route "via 172.16.101.2"
+	run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.103.2"
+	check_route "172.16.104.0/24 via 172.16.103.2 dev veth3"
+	log_test $? 0 "Single path with single path via multipath attribute"
+
+	# route replace fails - invalid nexthop
+	add_initial_route "via 172.16.101.2"
+	run_cmd "$IP ro replace 172.16.104.0/24 via 2001:db8:104::2"
+	if [ $? -eq 0 ]; then
+		# previous command is expected to fail so if it returns 0
+		# that means the test failed.
+		log_test 0 1 "Invalid nexthop"
+	else
+		check_route "172.16.104.0/24 via 172.16.101.2 dev veth1"
+		log_test $? 0 "Invalid nexthop"
+	fi
+
+	# replace non-existent route
+	# - note use of change versus replace since ip adds NLM_F_CREATE
+	#   for replace
+	add_initial_route "via 172.16.101.2"
+	run_cmd "$IP ro change 172.16.105.0/24 via 172.16.101.2"
+	log_test $? 2 "Single path - replace of non-existent route"
+}
+
+ipv4_rt_replace_mpath()
+{
+	# multipath with multipath
+	add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3 nexthop via 172.16.103.3"
+	check_route  "172.16.104.0/24 nexthop via 172.16.101.3 dev veth1 weight 1 nexthop via 172.16.103.3 dev veth3 weight 1"
+	log_test $? 0 "Multipath with multipath"
+
+	# multipath with single
+	add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	run_cmd "$IP ro replace 172.16.104.0/24 via 172.16.101.3"
+	check_route  "172.16.104.0/24 via 172.16.101.3 dev veth1"
+	log_test $? 0 "Multipath with single path"
+
+	# multipath with single
+	add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3"
+	check_route "172.16.104.0/24 via 172.16.101.3 dev veth1"
+	log_test $? 0 "Multipath with single path via multipath attribute"
+
+	# multipath with reject
+	add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	run_cmd "$IP ro replace unreachable 172.16.104.0/24"
+	check_route "unreachable 172.16.104.0/24"
+	log_test $? 0 "Multipath with reject route"
+
+	# route replace fails - invalid nexthop 1
+	add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.111.3 nexthop via 172.16.103.3"
+	check_route  "172.16.104.0/24 nexthop via 172.16.101.2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1"
+	log_test $? 0 "Multipath - invalid first nexthop"
+
+	# route replace fails - invalid nexthop 2
+	add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	run_cmd "$IP ro replace 172.16.104.0/24 nexthop via 172.16.101.3 nexthop via 172.16.113.3"
+	check_route  "172.16.104.0/24 nexthop via 172.16.101.2 dev veth1 weight 1 nexthop via 172.16.103.2 dev veth3 weight 1"
+	log_test $? 0 "Multipath - invalid second nexthop"
+
+	# multipath non-existent route
+	add_initial_route "nexthop via 172.16.101.2 nexthop via 172.16.103.2"
+	run_cmd "$IP ro change 172.16.105.0/24 nexthop via 172.16.101.3 nexthop via 172.16.103.3"
+	log_test $? 2 "Multipath - replace of non-existent route"
+}
+
+ipv4_rt_replace()
+{
+	echo
+	echo "IPv4 route replace tests"
+
+	ipv4_rt_replace_single
+	ipv4_rt_replace_mpath
+}
+
+ipv4_route_test()
+{
+	route_setup
+
+	ipv4_rt_add
+	ipv4_rt_replace
+
+	route_cleanup
+}
+
+ipv4_addr_metric_test()
+{
+	local rc
+
+	echo
+	echo "IPv4 prefix route tests"
+
+	ip_addr_metric_check || return 1
+
+	setup
+
+	set -e
+	$IP li add dummy1 type dummy
+	$IP li add dummy2 type dummy
+	$IP li set dummy1 up
+	$IP li set dummy2 up
+
+	# default entry is metric 256
+	run_cmd "$IP addr add dev dummy1 172.16.104.1/24"
+	run_cmd "$IP addr add dev dummy2 172.16.104.2/24"
+	set +e
+
+	check_route "172.16.104.0/24 dev dummy1 proto kernel scope link src 172.16.104.1 172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2"
+	log_test $? 0 "Default metric"
+
+	set -e
+	run_cmd "$IP addr flush dev dummy1"
+	run_cmd "$IP addr add dev dummy1 172.16.104.1/24 metric 257"
+	set +e
+
+	check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 172.16.104.0/24 dev dummy1 proto kernel scope link src 172.16.104.1 metric 257"
+	log_test $? 0 "User specified metric on first device"
+
+	set -e
+	run_cmd "$IP addr flush dev dummy2"
+	run_cmd "$IP addr add dev dummy2 172.16.104.2/24 metric 258"
+	set +e
+
+	check_route "172.16.104.0/24 dev dummy1 proto kernel scope link src 172.16.104.1 metric 257 172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 258"
+	log_test $? 0 "User specified metric on second device"
+
+	run_cmd "$IP addr del dev dummy1 172.16.104.1/24 metric 257"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 258"
+		rc=$?
+	fi
+	log_test $rc 0 "Delete of address on first device"
+
+	run_cmd "$IP addr change dev dummy2 172.16.104.2/24 metric 259"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 259"
+		rc=$?
+	fi
+	log_test $rc 0 "Modify metric of address"
+
+	# verify prefix route removed on down
+	run_cmd "$IP li set dev dummy2 down"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		out=$($IP ro ls match 172.16.104.0/24)
+		check_expected "${out}" ""
+		rc=$?
+	fi
+	log_test $rc 0 "Prefix route removed on link down"
+
+	# verify prefix route re-inserted with assigned metric
+	run_cmd "$IP li set dev dummy2 up"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 259"
+		rc=$?
+	fi
+	log_test $rc 0 "Prefix route with metric on link up"
+
+	# explicitly check for metric changes on edge scenarios
+	run_cmd "$IP addr flush dev dummy2"
+	run_cmd "$IP addr add dev dummy2 172.16.104.0/24 metric 259"
+	run_cmd "$IP addr change dev dummy2 172.16.104.0/24 metric 260"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.0 metric 260"
+		rc=$?
+	fi
+	log_test $rc 0 "Modify metric of .0/24 address"
+
+	run_cmd "$IP addr flush dev dummy2"
+	run_cmd "$IP addr add dev dummy2 172.16.104.1/32 peer 172.16.104.2 metric 260"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.2 dev dummy2 proto kernel scope link src 172.16.104.1 metric 260"
+		rc=$?
+	fi
+	log_test $rc 0 "Set metric of address with peer route"
+
+	run_cmd "$IP addr change dev dummy2 172.16.104.1/32 peer 172.16.104.3 metric 261"
+	rc=$?
+	if [ $rc -eq 0 ]; then
+		check_route "172.16.104.3 dev dummy2 proto kernel scope link src 172.16.104.1 metric 261"
+		rc=$?
+	fi
+	log_test $rc 0 "Modify metric and peer address for peer route"
+
+	$IP li del dummy1
+	$IP li del dummy2
+	cleanup
+}
+
+################################################################################
+# usage
+
+usage()
+{
+	cat <<EOF
+usage: ${0##*/} OPTS
+
+        -t <test>   Test(s) to run (default: all)
+                    (options: $TESTS)
+        -p          Pause on fail
+        -P          Pause after each test before cleanup
+        -v          verbose mode (show commands and output)
+EOF
+}
+
+################################################################################
+# main
+
+while getopts :t:pPhv o
+do
+	case $o in
+		t) TESTS=$OPTARG;;
+		p) PAUSE_ON_FAIL=yes;;
+		P) PAUSE=yes;;
+		v) VERBOSE=$(($VERBOSE + 1));;
+		h) usage; exit 0;;
+		*) usage; exit 1;;
+	esac
+done
+
+PEER_CMD="ip netns exec ${PEER_NS}"
+
+# make sure we don't pause twice
+[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no
+
+if [ "$(id -u)" -ne 0 ];then
+	echo "SKIP: Need root privileges"
+	exit $ksft_skip;
+fi
+
+if [ ! -x "$(command -v ip)" ]; then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+ip route help 2>&1 | grep -q fibmatch
+if [ $? -ne 0 ]; then
+	echo "SKIP: iproute2 too old, missing fibmatch"
+	exit $ksft_skip
+fi
+
+# start clean
+cleanup &> /dev/null
+
+for t in $TESTS
+do
+	case $t in
+	fib_unreg_test|unregister)	fib_unreg_test;;
+	fib_down_test|down)		fib_down_test;;
+	fib_carrier_test|carrier)	fib_carrier_test;;
+	fib_nexthop_test|nexthop)	fib_nexthop_test;;
+	ipv6_route_test|ipv6_rt)	ipv6_route_test;;
+	ipv4_route_test|ipv4_rt)	ipv4_route_test;;
+	ipv6_addr_metric)		ipv6_addr_metric_test;;
+	ipv4_addr_metric)		ipv4_addr_metric_test;;
+
+	help) echo "Test names: $TESTS"; exit 0;;
+	esac
+done
+
+if [ "$TESTS" != "none" ]; then
+	printf "\nTests passed: %3d\n" ${nsuccess}
+	printf "Tests failed: %3d\n"   ${nfail}
+fi
+
+exit $ret