diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/acpi/ssdt-overlays.txt | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/Documentation/acpi/ssdt-overlays.txt b/Documentation/acpi/ssdt-overlays.txt new file mode 100644 index 000000000..5ae13f161 --- /dev/null +++ b/Documentation/acpi/ssdt-overlays.txt @@ -0,0 +1,172 @@ + +In order to support ACPI open-ended hardware configurations (e.g. development +boards) we need a way to augment the ACPI configuration provided by the firmware +image. A common example is connecting sensors on I2C / SPI buses on development +boards. + +Although this can be accomplished by creating a kernel platform driver or +recompiling the firmware image with updated ACPI tables, neither is practical: +the former proliferates board specific kernel code while the latter requires +access to firmware tools which are often not publicly available. + +Because ACPI supports external references in AML code a more practical +way to augment firmware ACPI configuration is by dynamically loading +user defined SSDT tables that contain the board specific information. + +For example, to enumerate a Bosch BMA222E accelerometer on the I2C bus of the +Minnowboard MAX development board exposed via the LSE connector [1], the +following ASL code can be used: + +DefinitionBlock ("minnowmax.aml", "SSDT", 1, "Vendor", "Accel", 0x00000003) +{ + External (\_SB.I2C6, DeviceObj) + + Scope (\_SB.I2C6) + { + Device (STAC) + { + Name (_ADR, Zero) + Name (_HID, "BMA222E") + + Method (_CRS, 0, Serialized) + { + Name (RBUF, ResourceTemplate () + { + I2cSerialBus (0x0018, ControllerInitiated, 0x00061A80, + AddressingMode7Bit, "\\_SB.I2C6", 0x00, + ResourceConsumer, ,) + GpioInt (Edge, ActiveHigh, Exclusive, PullDown, 0x0000, + "\\_SB.GPO2", 0x00, ResourceConsumer, , ) + { // Pin list + 0 + } + }) + Return (RBUF) + } + } + } +} + +which can then be compiled to AML binary format: + +$ iasl minnowmax.asl + +Intel ACPI Component Architecture +ASL Optimizing Compiler version 20140214-64 [Mar 29 2014] +Copyright (c) 2000 - 2014 Intel Corporation + +ASL Input: minnomax.asl - 30 lines, 614 bytes, 7 keywords +AML Output: minnowmax.aml - 165 bytes, 6 named objects, 1 executable opcodes + +[1] http://wiki.minnowboard.org/MinnowBoard_MAX#Low_Speed_Expansion_Connector_.28Top.29 + +The resulting AML code can then be loaded by the kernel using one of the methods +below. + +== Loading ACPI SSDTs from initrd == + +This option allows loading of user defined SSDTs from initrd and it is useful +when the system does not support EFI or when there is not enough EFI storage. + +It works in a similar way with initrd based ACPI tables override/upgrade: SSDT +aml code must be placed in the first, uncompressed, initrd under the +"kernel/firmware/acpi" path. Multiple files can be used and this will translate +in loading multiple tables. Only SSDT and OEM tables are allowed. See +initrd_table_override.txt for more details. + +Here is an example: + +# Add the raw ACPI tables to an uncompressed cpio archive. +# They must be put into a /kernel/firmware/acpi directory inside the +# cpio archive. +# The uncompressed cpio archive must be the first. +# Other, typically compressed cpio archives, must be +# concatenated on top of the uncompressed one. +mkdir -p kernel/firmware/acpi +cp ssdt.aml kernel/firmware/acpi + +# Create the uncompressed cpio archive and concatenate the original initrd +# on top: +find kernel | cpio -H newc --create > /boot/instrumented_initrd +cat /boot/initrd >>/boot/instrumented_initrd + +== Loading ACPI SSDTs from EFI variables == + +This is the preferred method, when EFI is supported on the platform, because it +allows a persistent, OS independent way of storing the user defined SSDTs. There +is also work underway to implement EFI support for loading user defined SSDTs +and using this method will make it easier to convert to the EFI loading +mechanism when that will arrive. + +In order to load SSDTs from an EFI variable the efivar_ssdt kernel command line +parameter can be used. The argument for the option is the variable name to +use. If there are multiple variables with the same name but with different +vendor GUIDs, all of them will be loaded. + +In order to store the AML code in an EFI variable the efivarfs filesystem can be +used. It is enabled and mounted by default in /sys/firmware/efi/efivars in all +recent distribution. + +Creating a new file in /sys/firmware/efi/efivars will automatically create a new +EFI variable. Updating a file in /sys/firmware/efi/efivars will update the EFI +variable. Please note that the file name needs to be specially formatted as +"Name-GUID" and that the first 4 bytes in the file (little-endian format) +represent the attributes of the EFI variable (see EFI_VARIABLE_MASK in +include/linux/efi.h). Writing to the file must also be done with one write +operation. + +For example, you can use the following bash script to create/update an EFI +variable with the content from a given file: + +#!/bin/sh -e + +while ! [ -z "$1" ]; do + case "$1" in + "-f") filename="$2"; shift;; + "-g") guid="$2"; shift;; + *) name="$1";; + esac + shift +done + +usage() +{ + echo "Syntax: ${0##*/} -f filename [ -g guid ] name" + exit 1 +} + +[ -n "$name" -a -f "$filename" ] || usage + +EFIVARFS="/sys/firmware/efi/efivars" + +[ -d "$EFIVARFS" ] || exit 2 + +if stat -tf $EFIVARFS | grep -q -v de5e81e4; then + mount -t efivarfs none $EFIVARFS +fi + +# try to pick up an existing GUID +[ -n "$guid" ] || guid=$(find "$EFIVARFS" -name "$name-*" | head -n1 | cut -f2- -d-) + +# use a randomly generated GUID +[ -n "$guid" ] || guid="$(cat /proc/sys/kernel/random/uuid)" + +# efivarfs expects all of the data in one write +tmp=$(mktemp) +/bin/echo -ne "\007\000\000\000" | cat - $filename > $tmp +dd if=$tmp of="$EFIVARFS/$name-$guid" bs=$(stat -c %s $tmp) +rm $tmp + +== Loading ACPI SSDTs from configfs == + +This option allows loading of user defined SSDTs from userspace via the configfs +interface. The CONFIG_ACPI_CONFIGFS option must be select and configfs must be +mounted. In the following examples, we assume that configfs has been mounted in +/config. + +New tables can be loading by creating new directories in /config/acpi/table/ and +writing the SSDT aml code in the aml attribute: + +cd /config/acpi/table +mkdir my_ssdt +cat ~/ssdt.aml > my_ssdt/aml |